DRX332 Accessory Handset and
MULTIRANGETM Charger User's Guide
What's in the box?
DRX332
accessory handset with
MULTIRANGETM charger
AC adapter
(PS-0033)
Rechargeable
battery pack
(BT-1018)
Battery
cover
y
y
If any items are missing or damaged, contact our Customer
Care Line immediately. Never use damaged products!
If You...
Contact Uniden’s...
Phone Number
817-858-2929 or
800-297-1023
have a question or problem Customer Care Line*
need a part or accessory
Parts Department*
800-554-3988
need special assistance due
to a disability
800-874-9314
(voice or TTY)
Accessibility Help Line
*
During regular business hours, Central Standard Time. Visit our website
for detailed business hours.
© 2010 Uniden America Corp.
Fort Worth, Texas
Printed in Vietnam
UUZZ01221BZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Seꢀng Up Your Handset
Install the Baꢂery
1. Unpack the handset, battery pack, and
battery cover. If the battery cover is
already on the handset, press in on
the notch and slide the cover down
and off.
2. Line up the battery pack connector
with the jack inside the handset.
(The battery connector only fits one way.)
3. Push the battery pack connector in until it clicks into place.
Tug gently on the wires to make sure the battery pack is
securely connected.
4. Place the cover over the battery compartment and slide it
up into place.
Connect the Charger
1. Connect the AC adapter to the
charger's
jack and
AC IN 6.5V
route the cord as shown. (This
adapter might already be
connected.)
2. Plug the other end of the
adapter into a standard 120V AC power outlet.
3. Place the handset in the charger with the display facing
forward. The display on the handset should light up; if it
doesn't, reseat the handset or try plugging the AC adapter
into a different outlet.
#
Charge the handset completely (about 15 hours) before using it.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering the Handset
#
Registering the handset is a separate process from registering the
MULTIRANGETM charger. You can use the handset normally even
if the charger is not registered.
#
The accessory handset will not work until you register it to a
base!
Compaꢀble Bases
This handset is designed for use with Uniden's DECT3380
base. Other Uniden DECT6.0 bases might be compatible with
this handset. For up-to-date list of compatible bases for this
handset, see our website.
Register the handset
In most cases, all you need to do is place the handset in the
base. The display should say Handset Registering
.
If the handset doesn't fit in the base cradle or if the base has a
corded handset, follow the steps below:
FIND
1. On the base, press and hold
standby (about 5 seconds).
when the phone is in
POUND (#)
2. On the handset, press and hold
until the display
says Handset Registering (about 2 seconds).
#
After about 30 seconds, the handset display should say
Registration Complete
.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the connecꢀon
Pick up the handset and press
TALK
. Make sure you get a dial
END
tone. (Press
to hang up.)
If...
Try...
you don't hear a dial tone
the display says Registration
Failed
-
-
Making sure the handset is fully
charged, then trying again.
Using the Handset
y
When the handset registers to a base, it adapts its software
to match that specific base. This means that the exact
features and operation of the handset will vary slightly
depending on which base you register the handset to. Refer
to the user guide for the base you're registering the handset
to for feature descriptions.
y
y
All features and operation for the handset are described
in the user's guide for one of the bases listed under the
Compatible Bases section.
User guides for all Uniden phones are available on our
website for free downloading.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the MULTIRANGETM Charger
How It Works
The DRX332 MULTIRANGETM charger extends the range of your
base in all directions, including up and down. Each handset will
automatically connect to the charger or the base, depending on
which signal is stronger. (The handset operates exactly the
same way whether it's connected to the base or to the
MULTIRANGE charger.)
Base Coverage Area
Handsets in this area always
connect to the base.
Overlap Coverage
Area
Base
MULTIRANGETM
charger
Handsets in
this area might
connect to the
base or the charger.
Extended Coverage Area
Handsets in this area
always connect to the
charger.
y
To use the charger's MULTIRANGE function, you must
register the charger to a DECT3380 base. (Any MULTIRANGE
chargers that came packaged with the base are already
registered to that base for you.)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
y
y
Each of these bases can support up to two DRX332
MULTIRANGE chargers, including any that were supplied
with your phone.
Usually, you can't tell when a handset switches between the
base and the charger in the middle of a call, but sometimes,
you might notice a brief pause in your conversation.
Registering the MULTIRANGE charger
#
Registering the MULTIRANGE charger is a separate process from
registering the handset. You can use the charger even if the
handset is not registered.
FIND
1. On the base, press and hold
standby.
when the phone is in
2. On the bottom of the
MULTIRANGE charger, press
and hold the registration
button until the
light
LINK
starts to blink (about 2
seconds).
3. Release the button and wait
for the
light to turn on
LINK
and steady (this can take
about 90 seconds).
If the
light doesn't turn on, disconnect the charger's AC
LINK
adapter. Wait about 20 seconds, then try these steps again.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Some important things to remember:
y
Only register one charger at a time. If more than one charger
is in registration mode at the same time, they can interfere
with each other.
y
If you want to use the MULTIRANGE charger with a different
base, just register the charger to the new base. The charger
automatically erases the link to the old base when it
registers to the new one.
y
Only register the charger to one base at a time. If more than
one base is in registration mode at the same time, you can't
control which base the charger registers to.
Placing the MULTIRANGE charger
Here are a few tips for placing your MULTIRANGE charger so
that you get the clearest signal and the maximum range:
y
y
Make sure you have good reception from the base.
Put the charger at least 35 feet away from the base or any
other charger. (If you put the charger on a different floor
from the base, don't forget to allow 35 feet vertically, also.)
Picking the best spot
The best spot for the MULTIRANGE
charger is as far from the
base as possible while
still maintaining a good
signal, or near the edge of
the base’s coverage area.
To find the edge of the
coverage area:
1. Stand near the base
and make a call on
the handset.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2. While on the call, carry the handset away from the base
towards the general area where you want to put the
charger.
3. Watch the signal strength icon on the handset. Make a note
where the icon drops from 4 bars to 3 bars.
4. Continue walking away from the base. Make a note where
the signal strength icon drops from 3 bars to 2 or if you
start to hear noise on the line (which indicates the signal is
getting weaker).
5. Place the charger anywhere inside the range where the
signal strength icon showed 3 bars and the handset had a
clear signal with no noise.
Tesꢀng the locaꢀon
Connect the charger's AC adapter and make sure the
light
LINK
comes on steadily. If the light flashes, the MULTIRANGE charger
is not getting a good signal from the base. The charger may be
too far away from the base, there may be interference from
electronic devices, or the signal might be blocked by thick walls
or metal objects. Try moving the charger to another location.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Informaꢁon
Specifications
Part number
PS-0033
AC Adapter
Input voltage
Output voltage
Part number
Capacity
120V AC, 60 Hz
6.5V AC @ 350mA
BT-1018
Battery pack
500mAh, 2.4V DC
y
Use only the supplied AC adapter.
y
Be sure to use the proper adapter for the base and any
chargers.
y
Do not place the power cord where it creates a trip hazard
or where it could become chafed and create a fire or
electrical hazard.
y
Do not place the unit in direct sunlight or subject it to high
temperatures.
Battery Information
y
Fully charged, the battery should provide about 10 hours of
talk time and about 7 days of standby time. For best results,
return the handset to the cradle after each call to keep it
fully charged.
y
Keep an eye on the battery status icon. When the battery
gets too low, the handset shows a low battery alert. If you
hear a strange beep during a call, check the display: if you
see the low battery alert, finish your conversation as quickly
as possible and return the handset to the cradle. If the
handset is in standby, none of the keys will operate.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
y
With normal use, the battery should last about one year.
Replace the battery when the talk time becomes short even
when the battery is charged. To buy a replacement battery,
call the Parts Department listed on the front cover.
Rechargeable Nickel-Metal-Hydride Baꢁery Warning
CAUTION! Risk of explosion if battery is replaced by an
incorrect type! Dispose of used batteries according to
the instructions. Do not open or mutilate the battery.
Disconnect the battery before shipping this product.
y
This equipment contains a rechargeable Nickel-Metal-
Hydride battery.
y
Nickel is a chemical known to state of California to cause
cancer.
y
y
Do not short-circuit the battery.
The rechargeable batteries contained in this equipment may
explode if disposed of in a fire.
y
Do not charge the battery used in this equipment in any
charger other than the one designed to charge this battery
as specified in the owner's manual. Using another charger
may damage the battery or cause it to explode.
Rechargeable batteries must be recycled or disposed of
properly.
Uniden works to reduce lead content in PVC coated cords in our
products and accessories.
Warning! The cords on this product and/or
accessories contain lead, a chemical known to the
State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
Any changes or modificaꢀons to this product not expressly
approved by the manufacturer or other party responsible for
compliance could void your authority to operate this product.
FCC Part 15 information
This device complies with part 15 of the FCC rules. Operaꢀon is
subject to the following two condiꢀons: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operaꢀon. Privacy of communicaꢀons may not be
ensured when using this phone.
FCC PART 15.105(b): Note: This equipment has been tested
and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protecꢀon against harmful interference in a
residenꢀal installaꢀon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instrucꢀons, may cause harmful interference
to radio communicaꢀons. However, there is no guarantee that
interference will not occur in a parꢀcular installaꢀon. If this
equipment does cause harmful interference to radio or television
recepꢀon, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaꢀon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RF exposure information
This product complies with FCC radiaꢀon exposure limits under
the following condiꢀons:
• The base must be placed to allow a minimum of 20 cm (8 inches) between
the antenna and all persons during normal operaꢀon.
• The base must not be collocated or operated in conjuncꢀon with any other
antenna or transmiꢁer.
The handset is designed for body-worn operaꢀon and meets FCC
RF exposure guidelines when used with any belt clip, carrying
case, or other accessory supplied with this product. (All necessary
accessories are included in the package; any addiꢀonal or opꢀonal
accessories are not required for compliance with the guidelines.)
Third party accessories (unless approved by the manufacturer)
should be avoided as these might not comply with FCC RF
exposure guidelines.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: This equipment meets the applicable Industry Canada
Terminal Equipment Technical Specificaꢀons. This is confirmed
by the registraꢀon number. The abbreviaꢀon IC before the
registraꢀon number signifies that registraꢀon was performed
based on a Declaraꢀon of Conformity indicaꢀng that Industry
Canada technical specificaꢀons were met. It does not imply that
Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal
equipment is marked on the equipment itself. The REN assigned to
each terminal equipment provides an indicaꢀon of the maximum
number of terminals allowed to be connected to a telephone
interface. The terminaꢀon on an interface may consist of any
combinaꢀon of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio equipment
The term IC before the radio cerꢀficaꢀon number only signifies
that Industry Canada technical specificaꢀons were met. Operaꢀon
is subject to the following two condiꢀons: (1) this device may
not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operaꢀon of the device. "Privacy of communicaꢀons may not be
ensured when using this telephone".
One-year Limited Warranty
Important: Evidence of original purchase is required for
warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to
the original retail owner, this Uniden Product to be free from
defects in materials and craſtsmanship with only the limitaꢀons or
exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months aſter the date
of original retail sale. The warranty is invalid if the Product is
(A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configuraꢀons not sold by Uniden, (C)
improperly installed, (D) serviced or repaired by someone
other than an authorized Uniden service center for a defect
or malfuncꢀon covered by this warranty, (E) used in any
conjuncꢀon with equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner's manual for this
product.
STATEMENT OF REMEDY: In the event that the product does
not conform to this warranty at any ꢀme while this warranty is
in effect, warrantor will either, at its opꢀon, repair or replace
the defecꢀve unit and return it to you without charge for
14
Download from Www.Somanuals.com. All Manuals Search And Download.
parts, service, or any other cost (except shipping and handling)
incurred by warrantor or its representaꢀves in connecꢀon with
the performance of this warranty. Warrantor, at its opꢀon, may
replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU
OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow this
exclusion or limitaꢀon of incidental or consequenꢀal damages so
the above limitaꢀon or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If,
aſter following the instrucꢀons in the owner's manual you are
certain that the Product is defecꢀve, pack the Product carefully
(preferably in its original packaging). Disconnect the baꢁery from
the Product and separately secure the baꢁery in its own separate
packaging within the shipping carton. The Product should include
all parts and accessories originally packaged with the Product.
Include evidence of original purchase and a note describing the
defect that has caused you to return it. The Product should be
shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
15
Download from Www.Somanuals.com. All Manuals Search And Download.
• Uniden® is a registered
trademark of Uniden America
Corporaꢀon.
• Call waiꢀng, CID, CIDCW,
and Voice Mail are telephone
line services. Your phone
supports these services, but
you have to arrange for them
As an Energy Star®
Partner, Uniden has
determined that this
product meets the Energy
Star® guidelines for energy
efficiency. Energy Star® is
a U.S. registered mark.
through your telephone provider.
Contact your provider for details.
• The pictures in this manual are for example only. Your phone may not look
exactly like the pictures.
May be covered under one or more of the following U.S. patents:
5,663,9815,671,2485,717,3125,732,3555,754,4075,758,2895,768,345
5,787,3565,794,1525,801,4665,825,1615,864,6195,893,0345,912,968
5,915,2275,929,5985,930,7205,960,3585,987,3306,044,2816,070,082
6,076,0526,125,2776,253,0886,314,2786,321,0686,418,2096,618,015
6,714,6306,782,0986,788,9206,788,9536,839,5506,889,1846,901,271
6,907,0946,914,9406,940,8676,953,1187,023,1767,030,8197,146,160
7,203,3077,206,4037,310,3987,460,663
Other patents pending.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|