SOUNDS BETTER
Registering a DECT 1802
to a DECT 1811
Your DECT 1802 Additional
Handset will need to be
registered to your DECT
1811 unit before you can
use it. Use these simple
instructions to get you up
and running.
DECT 1811
DECT 1802
Procedure
1
Press and hold the page key on the DECT 1811 base unit until it starts
to ring (approx. 5 seconds). Release the page key.
2
3
4
5
On the DECT 1802 handset, press menu and then 5
The available base numbers will be displayed (1, 2, 3, 4), Press 1
When the display shows 4 lines [- - - -], enter 1
5
9
0
The handset will display the base ID number, press menu to accept this
number.
6
Repeat steps 1 - 5 if you have any additional handsets to register.
This process must be completed within 90 seconds, 3 beeps will indicate that you
have exceeded the time. Simply start again from step 1.
Need Help?
Call our HELP line -
Australia -
1300 366 895
New Zealand - 0800 4864 336
Download from Www.Somanuals.com. All Manuals Search And Download.
|