Uniden Cordless Telephone D2280 User Manual

D2280 Series User's Guide  
You will also find:  
What's in the box?  
Accessory handset  
and charger  
Not pictured:  
Rechargeable  
battery (BT-1022)  
Belt clip  
D2280 base  
with answering  
system and  
cordless  
handset  
Battery cover  
AC adapter  
(PS-0035)  
You should  
have:  
If you purchased  
model number:  
D2280  
None  
D2280-2  
1 of each  
Not pictured:  
Battery  
cover  
D2280-11  
D2280-12  
10 of each  
11 of each  
Rechargeable  
battery (BT-1022)  
AC adapter  
(PS-0035)  
Telephone cord  
Belt clip  
* If the model number ends in R,  
your package includes a DRX100  
range extender. Refer to the  
DRX100 User’s Guide for details.  
If any items are missing or damaged, contact our Customer Care Line  
immediately. Never use damaged products!  
If You...  
Contact Uniden’s...  
Phone Number  
817-858-2929 or  
800-297-1023  
have a question or problem  
Customer Care Line*  
need a replacement part or an  
accessory  
Parts Department*  
800-554-3988  
need special assistance due to  
a disability  
800-874-9314  
(voice or TTY)  
Accessibility Help Line  
*
During regular business hours, Central Standard Time; see our website for de-  
tailed business hours.  
© 2010 Uniden America Corp.  
Ft. Worth, Texas  
Printed in Vietnam  
U01UN218BZZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a regular indoor (120V AC)  
power outlet. Connect any  
chargers the same way.  
CAUTION! Risk of explosion  
if battery is replaced by an  
incorrect type! Dispose of used  
batteries according to the  
instructions. Do not open or  
mutilate the battery. Disconnect  
the battery before shipping this  
product.  
6. Place a handset in the base with  
the display facing forward. If  
the display doesn’t light up,  
reseat the handset or connect  
the base to a different outlet.  
For 2 or more handsets, place  
each handset in a charger.  
Charge all handsets  
For more details, see the  
Important Information section.  
GETTING STARTED  
Installing Your Phone  
completely (about 15 hours)  
before using.  
Connect the Telephone Cord  
Charge the Battery  
1. Unpack all handsets,  
battery  
Use the telephone cord to connect  
the  
jack on the base to a  
TEL LINE  
standard telephone wall jack.  
packs, and  
battery  
Test the Connection  
covers. If  
1. Pick up the handset and press  
you need  
Talk  
. The handset sounds a dial  
to remove  
tone, and the display shows  
Talk  
a cover, press in on the notch  
and slide the cover down and  
off.  
.
– If you don't hear a dial tone or  
the display says Check Tel Line,  
check the connection between  
the base and the phone jack.  
2. Line up the battery connector  
with the jack inside the  
handset; the connector only fits  
one way.  
3. Push the connector in until  
it clicks into place; tug gently  
on the wires to make sure the  
battery is securely connected.  
2. Make a quick test call. (Press  
End  
to hang up.)  
– If you keep hearing a dial tone,  
change to pulse dialing.  
– If there’s a lot of noise, check  
for interference (see p. 22).  
3. Test all handsets the same way.  
If you can't get a dial tone,  
move the handset closer to the  
base.  
4. Replace the battery cover and  
slide it into place.  
5. Use an AC adapter to connect  
the power jack on the base to  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢁ  
 
Changing to Pulse Dialing  
Your phone uses tone dialing by default. If your phone company uses  
pulse dialing, you need to change your phone’s dial mode.  
MEnu/sElEcT  
1. Press  
and choose Global Setup.  
2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.  
To send DTMF tones during a call (e.g., for an automated response  
system), press to temporarily switch to tone dialing. When you hang  
*
up, the phone automatically returns to pulse dialing.  
Attaching the Belt Clip  
Line up the holes on each side of the handset. Insert the belt clip into  
the holes on each side of the handset. Press down until it clicks.  
To remove the belt clip, pull either side of the belt clip to release the  
tabs from the holes.  
Getting to Know Your Phone  
Parts of the Base  
Message  
counter  
FIND  
HANDSET  
ANSWER PLAY/  
ON/OFF STOP  
DOWN  
Charging  
contacts  
DELETE  
REV  
FWD  
UP  
Key (icon)  
What it does  
When listening to messages: delete the current  
message.  
In standby: delete all messages.  
dElETE (  
)
In standby: page all handsets.  
Find HandsET (  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢂ - English  
 
Key (icon)  
REv (  
What it does  
In the first 2 seconds of a message: go to the  
previous message.  
)
Anytime after that: restart the current message.  
In standby: turn the answering system on and off  
answER On/OFF (  
)
When the phone is ringing: ignore this call (mute  
the ringer).  
Play/sTOP  
(
)
In standby: begin message playback.  
While screening calls: mute Call Screen.  
While playing a message: stop playing messages.  
Fwd (  
)
While playing a message: skip to the next message.  
In standby: decrease the ringer volume.  
While playing a message: decrease the speaker  
volume.  
dOwn (  
)
In standby: increase the ringer volume.  
While playing a message: increase the speaker  
volume.  
uP (  
)
Parts of the Handset  
MESSAGE/  
MUTE  
12-key  
dial pad  
MENU/  
Earpiece  
Display UP SELECT END  
FLASH  
INTERCOM/  
CLEAR  
CID  
Charging  
contacts  
PHONEBOOK  
TALK  
SPEAKER  
REDIAL/  
PAUSE  
DOWN  
Microphone  
Visual  
ringer  
Headset  
jack  
Key (icon) What it does  
In standby: increase the ringer volume.  
During a call: increase the audio volume.  
uP  
(
)
In any menu or list: move the cursor up one line.  
In standby: open the menu.  
In the menu or any list: select the highlighted item.  
MEnu/sElEcT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢃ  
Key (icon) What it does  
During a call: hang up.  
In the menu or any list: exit and go to standby.  
End  
FlasH  
cid  
During a call: switch to a waiting call.  
In standby: or during a call: open the Caller ID list.  
When entering text: move the cursor to the right.  
In standby: access your answering system.  
During a call: mute the microphone.  
While the phone is ringing: ignore this call (mute the  
ringer).  
MEssagE/  
MuTE  
(
)
In standby: start an intercom call.  
inTERcOM/  
clEaR  
During a call: put the call on hold and start a call transfer.  
When entering text or numbers: erase the character at the  
cursor (press & hold to erase all characters).  
In standby or during a call: open the phonebook.  
In the menu: go back to the previous screen.  
When entering text: move the cursor to the left.  
PHOnEbOOk  
(
)
Talk  
In standby: start a telephone call (get a dial tone).  
sPEakER  
Switch a normal call to the speakerphone (and back).  
(
)
In standby: decrease the ringer volume.  
During a call: decrease the audio volume.  
In any menu or list: move the cursor down one line.  
dOwn  
(
)
REdial/PausE  
In standby: open the redial list.  
(
)
When entering a phone number: insert a 2-second pause.  
Status  
icons  
Reading the Display  
The table shows possible  
Handset  
and CID  
info  
status icons and what they mean.  
Since the icons appear based on  
what the phone is doing, you won't  
see all the icons at the same time  
Time &  
date  
Answering  
system  
status  
UP or  
DOWN  
uP  
You can use the and  
dOwn  
keys to  
scroll through CID lists and phonebook entries. You can also use the  
lEFT RigHT  
and  
keys to jump to the next (or previous) 5 entries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢄ - English  
Icon  
What it means  
The signal from the base is 1) weak through 4) strong.  
The ringer is turned off and will not ring for new calls.  
The speakerphone is on.  
The handset is using ECO (power save) mode.  
You have a voice message waiting.  
T-coil mode is on (see p. 8).  
The battery is 1) full, 2) half charged, 3) getting low or 4) empty.  
Privacy Mode is on: no other handset can join the call.  
[Aa] [aA] Enter 1) capital or 2) lower case letters (see p. 9).  
Using the Handset Menu  
MENU/SELECT  
Press  
to open the menu.  
MENU/SELECT  
choose that option.  
Press  
to  
Message Manager  
Handset Setup  
Ans. Setup  
T-coil  
Ringer Tones  
Personal Ring  
T-coil  
Press  
PHONEBOOK  
On  
Off  
to  
UP  
Use and  
DOWN  
to  
go back a screen  
OR  
select a menu.  
END  
the menu.  
press  
to exit  
If you don't press any keys for about 30 seconds, the handset exits the  
menu.  
During a call, use  
Talk  
to back out of the menu without hanging up.  
Message Manager Menu  
Message Manager displays the caller’s information for each TAD  
message. You can select a caller and play back the TAD message.  
Handset Setup Menu  
You can change these settings separately for each handset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢅ  
 
Use this menu... To...  
Turn on T-coil mode to reduce noise on hearing aids  
equipped with a telecoil (T-coil) feature. T-coil mode  
shortens talk time, so keep your battery fully charged.  
T-coil  
Choose this handset's ring tone. As you highlight each  
ring tone, the phone plays a sample. When you hear  
Ringer Tones  
MEnu/sElEcT  
the tone you want, press  
.
Turn on personal ring so you can assign a special ring  
tone to people in your phonebook. With Caller ID, this  
handset uses the assigned tone when the person calls.  
Have this handset answer a call when you pick it up  
from the cradle (without pressing any buttons).  
Personal Ring  
AutoTalk  
Have this handset answer a call when you press any  
key on the 12-key dialpad.  
Change the name used on the handset's display.  
Any Key Answer  
Banner  
Handset Language Change the display language.  
Key Touch Tone  
LCD Contrast  
Have the keypad sound a tone when you press a key.  
Change the contrast of the display.  
Ans. Setup Menu  
Refer to p. 17 for details on setting up your answering system.  
Date & Time Menu  
Use this menu to set the clock (if you have Caller ID, the phone sets  
date and time automatically). Enter the date and time (MM/DD/YY);  
cid  
select AM or PM. Use  
changing it.  
to move the cursor past a digit without  
Global Setup Menu  
The settings on this menu affect all handsets. Only one handset at a  
time can change these menu options.  
Use this menu...  
To...  
Dial Mode  
Choose tone or pulse dialing (see p. 4).  
Do not change this setting unless instructed to by  
customer service.  
Reset the Voice Message Waiting Indicator (see p. 17)  
Set Line Mode  
VMWI Reset  
Enter, edit, or delete the access number for voice mail  
service (see p.17).  
Edit Voice Mail  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢆ - English  
Use this menu...  
To...  
Edit Int’l No.  
Enter, edit, or delete international numbers.  
Call Blocking Menu  
See p. 14 for a detailed description of the Call Blocking feature.  
Entering Text on Your Phone  
Use the 12-key dial pad anytime you want to enter text into your  
phone (a name in the phonebook, the handset banner, etc.).  
If two letters in a row use the same key, enter the first letter; wait for  
the cursor to move to the next space and enter the second letter.  
To...  
Press...  
PHOnEbOOk  
move the cursor left  
.
cid  
.
move the cursor right  
inTERcOM/clEaR  
erase the character at the cursor  
erase the entire entry  
.
inTERcOM/clEaR  
and hold  
.
#
.
enter a blank space  
switch between upper and lower case letters  
rotate through the punctuation and symbols  
.
.
*
0
USING YOUR PHONE  
This section explains the most common functions on the phone.  
Using the  
earpiece  
Using the  
speakerphone  
To...  
Talk  
sPEakER  
make a call, dial the number & press  
.
.
press  
press  
.
.
Talk  
sPEakER  
answer a call  
hang up  
press  
press  
press  
End  
or put the handset in the cradle.  
MEssagE/MuTE  
while the phone is  
ignore a call/mute the ringer  
ringing.  
sPEakER  
switch to the speaker & back press  
mute the microphone during press  
.
MEssagE/MuTE  
microphone back on).  
(press again to turn the  
a call  
inTERcOM/clEaR*  
put a call on hold  
return to a call on hold  
press  
press  
.
Talk  
sPEakER  
.
.
press  
*
Aſter 5 minutes on hold, the call will be disconnected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢇ  
 
Finding a Lost Handset  
With the phone in standby, press  
beep for 1 minute; to cancel, press  
handset key.  
Find HandsET  
Find HandsET  
on the base. All handsets  
again or press any  
Changing the Volume  
To change the...  
When...  
Press...  
earpiece or speaker  
you are listening to that  
earpiece or speaker (playing  
messages, etc.)  
uP  
to increase  
the volume.  
dOwn  
volume for each handset  
base speaker volume  
ringer volume for each  
handset or the base*  
to  
decrease it.  
the phone is in standby  
*
If you turn the ringer all the way down, that particular ringer turns off.  
Using the Caller ID and Redial Lists  
Caller ID (CID) is a service available from your telephone provider  
that shows the phone number (and sometimes the caller’s name) of  
incoming calls. Contact your telephone provider for more information.  
Caller ID list  
Redial list  
The phone saves the information for the last 50  
Each handset  
remembers the  
last 5 numbers  
you dialed on it.  
Only one handset  
can access its  
redial list at a  
time.  
*
received calls to the CID list. An asterisk ( ) marks  
any calls received since the last time you checked  
the record details.  
All handsets share the same CID list so only one  
handset can access the list at a time.  
In standby, handsets show how many calls came in  
since the last time you checked the CID list.  
To…  
Press...  
cid  
uP  
dOwn  
keys to enter the list.  
, then use the and  
Five entries display at a time.  
REdial/PausE  
open the CID list  
open the redial list  
.
uP  
to select the previous number.  
dOwn  
to select the next number.  
In CID list:  
scroll through the  
lists  
RigHT  
to view the next 5 numbers.  
lEFT  
to view the previous 5 numbers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 - English  
To…  
Press...  
dial the  
highlighted  
number  
Talk sPEakER.  
or  
review current CID  
record details  
MEnu/sElEcT  
.
* once to add 1 for a toll call.  
* twice to add the International code to the CID  
add other digits  
and codes to the  
CID number  
number.  
Press a third time to return to normal  
*
mode.  
End  
close the lists  
.
MEnu/sElEcT  
For individual record options, find a number and press  
(press twice from a CID entry) to display the following options for that  
person:  
Select...  
To...  
Delete  
Erase the number from the list.  
Add the number to the phonebook. The handset prompts  
you to edit the name and number and select a personal  
ring.  
Store Into PH  
BK  
(CID list only) Add the number to the Call Block list (see  
p. 14).  
Add Call Block  
Using Call Waiting  
Call Waiting, a service available from your telephone provider, lets  
you receive calls while you are on another call. Caller ID on Call  
Waiting (CIDCW) service displays Caller ID information for a  
waiting call.  
If you get a Call Waiting call, the phone sounds a tone and displays  
FlasH  
any CID information received from the waiting call. Press  
to  
switch between the current call and the waiting call; each time you  
switch, there is a short pause before you're connected to the other  
call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 11  
Using an Optional Headset  
You can use a standard 2.5 mm telephone  
headset with your cordless handsets. To  
purchase headsets, contact the Parts  
Department (see the front cover).  
To install a headset, remove the headset jack  
cover and insert the headset plug into the  
jack.  
(Belt clip  
hole)  
Just make and receive calls as usual, and use your headset to talk to  
the caller after the call connects.  
When you connect a headset, the handset automatically mutes the  
earpiece. To re-activate the earpiece, just unplug the headset.  
Using the Phonebook  
The phone can store up to 200 entries in its phonebook. All handsets  
share the same phonebook, so only one handset can access it at a time.  
To...  
Press...  
PHOnEbOOk  
enter the phonebook.  
uP dOwn  
, then use the or  
keys to  
open the phonebook  
dOwn  
to scroll through the entries from A to Z.  
to scroll from Z to A.  
uP  
scroll through the entries  
RigHT  
to view the next 5 listings.  
lEFT  
to view the previous 5 listings.  
jump to entries that start  
with a certain letter  
the number key corresponding to the letter  
you want.  
Talk sPEakER  
or  
dial the current entry  
.
review the current entry’s  
details  
MEnu/sElEcT  
.
MEnu/sElEcT  
twice to open the menu, then  
edit the current entry  
select Edit  
.
MEnu/sElEcT  
twice to open the menu, then  
select Delete. To confirm, select Yes  
End  
delete the current entry  
close the phonebook  
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢀ - English  
 
Adding Phonebook Entries  
MEnu/sElEcT  
With the phone in standby, open the phonebook. Press  
and  
select Create New. Enter a name & number and select a personal ring.  
Enter the phone number (up to 20 digits) exactly as you would dial  
it.  
If you need the phone to wait before sending the next set of digits,  
REdial/PausE  
press  
to insert a 2-second pause. You can insert multiple  
pauses, but each one counts as a digit (you’ll see in the display).  
To edit the name, press  
insert a letter. Press  
To edit the number, press  
delete numbers. Re-enter the correct numbers.  
P
PHOnEbOOk  
inTERcOM/clEaR  
to move the cursor back and  
to delete a letter.  
inTERcOM/clEaR  
to back up the cursor and  
Deleting All the Phonebook Entries  
MEnu/sElEcT  
With the phone in standby, open the phonebook. Press  
and  
.
select Delete All. When the phone prompts you to confirm, select Yes  
USING SPECIAL FEATURES  
Silent Mode  
You can silence the ringers on the base and all handsets for a specific  
period of time; the answering system answers any incoming calls  
without playing anything through the speaker.  
#
1. With the phone in standby, press and hold on any handset. The  
phone prompts you to select the number of hours ( or Always  
On) that you want it to stay in silent mode.  
MEnu/sElEcT  
1
-
9
2. To confirm, press  
or just wait about 5 seconds. The  
phone turns on the answering system and displays Silent Mode On  
on each handset.  
3. After the selected number of hours, the phone automatically exits  
#
silent mode. To exit silent mode manually, press and hold again.  
If the phone is in silent mode and you turn off the answering  
system, the phone exits silent mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 1ꢁ  
 
Call Block  
If you subscribe to Caller ID, you can save phone numbers to the call  
block list. When a call comes in, the phone compares the received  
phone number to the numbers on the call block list. If the phone  
number is on the list, the phone replaces the caller's name with Call  
Blocked and blocks the call.  
The call block list holds 20 entries, and all handsets share the same  
list. You can add entries by selecting Add Call Block in the CID menu  
that displays after you have viewed the CID record or through the Call  
Blocking menu (see below). (Only one handset can edit the call block  
list at a time.)  
Call Blocking Menu Options  
With the phone in standby, open the menu and select Call Blocking  
.
Choose one of these options:  
Choose this...  
To...  
View Number  
See the numbers on your call block list.  
Add an entry to your call block list. The phone will  
prompt you to enter a name & phone number.  
Create New  
Block all calls from numbers reported by CID as  
"Private." (This does not count as one of the 20 entries.)  
Private Number  
Block all calls from numbers reported by CID as  
Unknown Number "Unknown." (This does not count as one of the 20  
entries.)  
Call Blocking Entry Options  
With the phone in standby, open the call block list and find the entry  
MEnu/sElEcT  
one of these options:  
you want. Press  
to open the individual entry menu. Choose  
Choose this... To...  
Edit this entry. The phone will prompt you to edit the name  
& phone number.  
Edit  
Delete  
Erase this entry from the list & allow calls from this number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢂ - English  
 
Multihandset Features  
To use the features in this section, you need at least 2  
handsets.  
Your base supports a total of 12 cordless handsets: the one that  
came with the base and up to 11 accessory handsets. Your base also  
supports a total of 2 DRX100 range extenders, including any that  
came with your phone.  
You must register accessory handsets to the base before using them.  
(Handsets that came packaged with the base are already registered.)  
Handsets that aren’t registered display a Not Registered message.  
For registration instructions, see p. 24, or see the accessory handset  
manual.  
If a handset was ever registered to a base, you must reset it before  
it can register to a new base; see p. 24, or see the accessory handset  
manual.  
Conference Calling  
When an outside call comes in, four handsets can join in a  
conference call with the outside caller.  
Talk sPEakER  
To join a call that’s already in progress, just press  
or  
.
To leave the conference call, hang up normally; the other handset  
remains connected to the call.  
Call Transfer  
To...  
Press...  
inTERcOM/clEaR  
. The phone puts the call on hold and  
prompts you to select the handset you want to page.  
When the other handset accepts the call, you'll be  
transfer a call  
Talk  
disconnected (press  
to rejoin the call).  
Talk  
cancel a transfer  
accept a  
to return to the call.  
inTERcOM/clEaR  
transferred call handset. Then, press  
to answer the page and speak to the other  
Talk  
to speak to the caller.  
Privacy Mode  
MEnu/sElEcT  
To activate privacy mode on a call in progress, press  
twice. As long as privacy mode is on, you'll see a in the display,  
and no other handsets can join your call. Privacy mode turns off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 1ꢃ  
 
automatically when you hang up; you can also turn it off by pressing  
MEnu/sElEcT  
twice.  
Handset to Handset Intercom  
Whenever the phone is in standby, you can make an intercom call  
between handsets without using the phone line.  
You can make an intercom call from any handset, but only two  
handsets can be in an intercom call at any time.  
If an outside call comes in during an intercom page, the phone  
cancels the page so you can answer the incoming call.  
Talk  
If an outside call comes in during an intercom call, press  
hang up the intercom call and answer the outside call.  
to  
To...  
Press...  
inTERcOM/clEaR.  
with, or All to page all handsets at the same time.  
make an intercom  
page  
Select the handset you want to talk  
End  
cancel a page  
.
inTERcOM/clEaR Talk  
or  
answer a page  
.
End  
end an intercom call  
. Both handsets return to standby.  
Chain Dialing  
If you often have to enter a series of digits or a code number during a  
call, you can save that code number to a phonebook entry and use the  
phonebook to send the code number.  
1. Enter the code number (up to 20 digits) into the phonebook just like  
a regular phonebook entry. Be sure to enter the code number into  
the phonebook exactly as you would enter it during a call.  
2. When you hear the prompt that tells you to enter the number, open  
the phonebook and find the entry that contains your code number.  
MEnu/sElEcT  
3. Press  
twice to send the code. If you change your mind,  
just close the phonebook.  
Voice Message Notification  
If you subscribe to a voice mail service, your phone can notify you  
when you have a new message. This feature supports Frequency-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢄ - English  
 
Shift Keying (FSK) notification. Contact your voice mail provider for  
information.  
When you have new messages, the display shows a message icon. To  
MEssagE/MuTE  
listen to your new (and old) messages, press  
and select  
Voice Mail  
.
When you select Voice Mail, you will be prompted to enter a  
Voice Mail Access number if you have not yet set one up (see  
p. 8). If you have already set one up, your phone will dial it.  
After you listen to your messages, the message icon turns off. If it  
doesn’t, you can reset it: With the phone in standby, open the menu  
and select Global Setup; select VMWI Reset, then select Yes  
.
USING THE ANSWERING SYSTEM  
Answering System Options (Ans. Setup  
)
You can set or change the answering system options from any handset.  
Just open the menu and select Ans. Setup  
Select this option... To...  
Enter a 2-digit PIN so you can access your  
.
Security Code  
answering system from any touch-tone phone (see  
p. 21).  
Set the number of rings (  
2
,
4
, or 6) before the system  
answers. Toll Saver makes the system answer after  
2 rings if you have new messages or after 4 rings if  
you don't.  
Ring Time  
Set the amount of time (1 or 4 minutes) callers  
have to leave a message. Choose Announce Only if  
you don't want the system to let callers to leave a  
message.  
Record Time  
Have the system beep every 15 seconds when you  
have a new message. The alert stops after you listen  
to all your new messages or if you press any key on  
the base.  
Change the language of the system's voice  
prompts.  
Message Alert  
Ans. Language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 1ꢅ  
   
Select this option... To...  
Turn on the call screen feature so you can hear  
callers as they leave messages on the base speaker  
(see p. 20).  
Call Screen  
Turn your answering system on or off.  
Ans. On/Off  
answER On/OFF  
You can also press  
on the base.  
Record an outgoing message or greeting (see  
below).  
Switch greetings or delete your greeting (see  
below).  
Record Greeting  
Greeting Options  
Personalizing the Greeting  
Your personal outgoing message or greeting can be from 2 to 30  
seconds long. If you don’t record a greeting, the system uses a pre-  
recorded greeting: Hello, no one is available to take your call. Please  
leave a message after the tone.  
To...  
Follow these steps:  
1. Open the menu with the phone in standby. Select Ans.  
Setup, then Record Greeting  
.
MEnu/sElEcT  
2. Press  
to start recording. Wait until the system  
Record a  
personal  
greeting  
says "Record greeting" before speaking.  
MEnu/sElEcT  
3. Press  
to stop recording. The system plays back  
your new greeting.  
End  
. To delete it and try again,  
4. To keep the greeting, press  
inTERcOM/clEaR  
press  
.
1. Open the menu with the phone in standby. Select Ans.  
Switch  
between  
greetings  
Setup, then Greeting Options  
2. The system plays back the current greeting. Press  
sElEcT  
.
MEnu/  
to switch greetings.  
inTERcOM/clEaR  
Delete your Switch to your personal greeting, then press  
greeting while the greeting is playing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1ꢆ - English  
 
Accessing the Answering System  
When the phone’s in standby, you can access the system from any  
handset using two different methods: Message Manager and Play  
Messages. Regardless of which method you use to get your messages,  
the following conditions apply:  
Only 1 handset can access the system at  
a time.  
Select Message Manager  
or Play Messages.  
Message Manager  
If you do nothing for 30 seconds, the  
phone returns to standby.  
Play Messages  
Voice Mail  
During remote access, the phone beeps  
so you know it's waiting for the next  
command.  
MEnu/  
During message playback, press  
sElEcT  
to open the menu for playback  
control.  
Message Manager  
Message Manager lets you view the caller’s information. Press  
MEssagEs/MuTE  
uP dOwn  
and then select Message Manager; press or  
to  
MEnu/sElEcT  
find the message you want to listen to. Press  
to listen to  
that message or you can scroll to the next one.  
Play All Messages  
Play All Messages replays all the messages received, starting with the  
newest, unheard messages and then replaying the older messages.  
MEssagEs/MuTE  
Press  
to access the Play Messages selection. You can play  
messages with this mode from the base or from the handset.  
To...  
From the base  
Play/sTOP.  
From a handset  
MEssagE/MuTE  
select Play Messages  
Press  
and  
.
Press  
play new  
messages  
The system announces the number of new & old  
messages, then plays each new message (followed by the  
day and time) in the order it was received. After the new  
messages play, the system plays the old messages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 1ꢇ  
 
To...  
From the base  
From a handset  
Wait at least 5 seconds after the message starts playing,  
restart this  
message  
REv.  
1
press  
press (number key).  
Within 2 seconds after a message starts playing,  
REv.  
Fwd  
replay an  
earlier message  
1
press  
select (number key).  
3
skip a message Press  
.
Select (number key).  
While a message  
is playing, select  
(number key).  
delete a  
message  
While a message is playing, press  
4
dElETE  
.
With the phone in standby,  
press  
confirm.  
delete all  
messages  
dElETE  
; press  
dElETE  
again to Not available.  
After the system plays all new messages,  
Play/sTOP  
select (number key).  
play old  
messages  
2
press  
again.  
Play/sTOP  
5
stop playback Press  
.
Select (number key).  
Screening Your Calls  
You can use the answering system for call screening. While the system  
takes a message, you can listen on the base speaker (if you turn on Call  
Screen) or from a handset. Only one handset can screen calls at a time.  
If another handset tries to screen calls, it beeps and returns to standby.  
To...  
From the base  
From a handset  
hear the caller leaving a Listen to the caller  
MEssagE/MuTE  
Press  
.
message  
over the speaker.  
NA  
Talk  
End  
answer the call  
Press  
Press  
.
mute the call screen  
without answering*  
or return the  
Play/sTOP  
Press  
.
handset to the cradle.  
*
If you mute the call screen, the system continues taking the message: it just  
stops playing through the speaker.  
Using the System While You're Away from Home  
You can dial in to your answering system from any touch-tone phone.  
Before you can use this feature, you must program a security code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ0 - English  
 
Programming a Security Code  
With the phone in standby, open the menu; select Ans. Setup, then  
select Security Code. Use the number keypad to enter a two-digit  
MEnu/sElEcT  
security code (01 to 99). Press  
when you’re finished.  
Remember to make a note of your new security code!  
Dialing In to Your System  
1. Call your phone number & wait until the system answers. (If the  
system is turned off, it answers after 10 rings & sounds a series of  
beeps.)  
0
2. During the greeting or beeps, press and immediately enter your  
security code. If you enter it incorrectly 3 times, the system hangs  
up and returns to standby.  
3. The system announces the time, the number of messages in  
memory, and a help prompt. It beeps to let you know it's waiting for  
a command.  
4. When you hear beeping, enter a 2-digit command from the chart.  
If you don't  
01 Repeat message  
02 Play message  
03 Skip message  
04 Delete message  
05 Stop playback  
press any  
06 Turn the system on  
09 Turn the system off  
10 Hear help prompts  
keys for 15  
seconds, the  
system hangs  
up and return  
to standby.  
IMPORTANT INFORMATION  
Solving Problems  
If you have any trouble with your phone, check this section first. If you  
need help, call our Customer Care Line listed on the front cover.  
General problems  
Possible solutions  
Check the telephone cord connection.  
Disconnect the base AC adapter for a few  
minutes; then reconnect it.  
No handsets can make or  
receive calls.  
A handset can’t make or  
receive calls.  
Move the handset closer to the base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢀ1  
 
Make sure the ringer is turned on.  
Make sure Silent Mode is turned off (see p.  
13).  
A handset can make calls,  
but it won’t ring.  
Charge the battery for 15-20 hours.  
Check the battery connection.  
A handset is not working.  
The phone keeps ringing  
when I answer on an  
extension.  
You may have to change the line mode.  
Contact Customer Service for instructions.  
Audio issues  
Possible solutions  
Move the handset closer to the base.  
Keep the handset’s battery fully charged.  
Increase the earpiece volume.  
Callers sound  
weak or soft.  
Check for interference from appliances (microwave  
ovens, TVs, etc.) or wireless devices (baby monitors,  
WiFi equipment, etc.). Move the handset or base away  
from the interference source.  
If you use a telecoil hearing aid, turn on T-coil mode  
(see p. 8).  
There’s a lot of  
noise or static on  
the line  
If you have any service that uses the phone line, add a  
DSL or telephone line filter (see p. 23).  
Caller ID problems  
Possible solutions  
Let calls ring twice before answering.  
Make sure your Caller ID service is active.  
No handsets display  
Caller ID information.  
Caller ID displays briefly You may have to change the line mode.  
and then clears.  
Contact Customer Service for instructions.  
Multi-handset problems  
I can’t transfer calls.  
Possible solutions  
Reset the handset (see p. 24).  
See if any handset is in Privacy  
Mode.  
Two handsets can’t talk to a caller.  
Move the handset closer to the base.  
See if any handset is in Privacy  
Mode.  
A handset says Unavailable  
.
Reset the handset (see p. 24).  
See if you have 12 registered  
handsets.  
I can’t register a new handset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ - English  
Answering system problems Possible solutions  
Make sure the answering system is on.  
Make sure the base is plugged in.  
The answering system does  
not work.  
See if Record Time is set to Announce  
The system won't record  
messages.  
Only  
.
Delete messages (memory may be full).  
See if another handset is using the  
system.  
Make sure the phone is in standby.  
A handset can't access the  
answering system.  
If there was a power failure, re-record  
My outgoing message is gone.  
I can’t hear the base speaker.  
Messages are incomplete.  
your personal outgoing message.  
Make sure call screening is turned on.  
Change the base speaker volume.  
Increase the Record Time  
.
Delete messages (memory may be full).  
The system keeps recording  
when I answer on an  
extension.  
You may have to change the line  
mode. Contact Customer Service for  
instructions.  
Installing a Line Filter or DSL Filter  
A telephone line filter or DSL filter prevents services that use the  
phone line from causing interference on your phone. To get a line filter,  
contact your service provider or look in an electronics store.  
Plug the filter into the telephone wall jack and plug the base into the  
filter. Make a test call to make sure the noise is gone.  
Liquid Damage  
CAUTION: If the base is covered in liquid, disconnect the  
adapter & phone cord from the wall before touching it.  
If the liquid is only on the exterior housing of the base or handset,  
wipe it off and use as normal. If you can hear liquid inside the housing:  
1. Remove all compartment covers, and disconnect all cables and  
cords.  
2. If liquid is leaking from any vent or hole, turn the phone so that vent  
faces down. If not, place the largest vent face down.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢀꢁ  
3. Let dry for at least 3 days.  
Check for liquid inside the  
phone before replacing  
compartment covers &  
reconnecting cords.  
30 seconds), then pick up the  
Talk  
handset; press  
.
If you don’t hear a dial  
tone or the display says  
Registration Failed, charge the  
battery completely, then  
try again.  
Resetting Handsets  
If you have trouble with a handset  
or if you want to replace one,  
Adapter and Battery  
Information  
clear the registration information  
from the base and the handset:  
AC adapter  
End  
#
1. Press & hold  
and at the  
Part number  
Input voltage  
Output voltage 8V AC @ 300mA  
PS-0035  
120V AC, 60 Hz  
same time until you see the  
System Reset menu.  
Use only the supplied AC adapters.  
Use the proper adapter for the base &  
any chargers.  
2. If you still have the base  
the handset is registered to,  
select Deregister HS, then  
select the handset you want  
to reset. If you don’t have that  
base anymore, select Base  
Do not place the unit in direct sunlight  
or subject it to high temperatures.  
Battery pack (with normal use)  
Part number  
Capacity  
Talk time  
Standby time  
Battery life  
BT-1022  
Unavailable  
.
300mAh, 2.4V DC  
about 7 hours  
about 7 days  
about 1 year  
3. To confirm, select Yes. The  
handset displays Handset not  
registered  
.
Replace the battery when the talk or  
standby time becomes noticeably re-  
duced. For replacements, call the Parts  
Department (see the front cover).  
When the battery gets low, the handset  
beeps and shows a low battery alert;  
put the handset in the cradle for  
recharging.  
Registering Handsets  
If you see a “not registered”  
message on a handset, you must  
register it to a base before using  
it.  
1. Place the handset in the base;  
Rechargeable Battery Warning  
the display should say Handset  
is equipment contains a recharge-  
able Nickel-Metal-Hydride (Ni-MH)  
battery.  
Registering  
.
2. Wait until the display says  
Registration Complete (about  
Nickel is a chemical known to the state  
of California to cause cancer.  
Do not short-circuit the battery.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢂ - English  
 
e batteries in this equipment may  
explode if disposed of in a fire.  
Do not charge the batteries in any  
charger other than the one specified  
in the owner's manual. Using another  
charger may damage the battery or  
cause it to explode.  
AAAEQ##TXXXX. If requested, this  
number must be provided to the phone  
company.  
An applicable Universal Service  
Order Codes (USOC) certification for  
the jacks used in this equipment is  
provided (i.e., RJ11C) in the packaging  
with each piece of approved terminal  
equipment. A plug and jack used to  
connect this equipment to the premis-  
es wiring and telephone network must  
comply with the applicable FCC Part  
68 rules and requirements adopted by  
the ACTA. A compliant telephone cord  
and modular plug is provided with  
this product. It is designed to be con-  
nected to a compatible modular jack  
that is also compliant. See installation  
instructions for details.  
e REN is used to determine the  
number of devices that may be con-  
nected to a phone line. Excessive RENs  
on a phone line may result in devices  
not ringing in response to an incom-  
ing call. In most but not all areas, the  
sum of RENs should not exceed five  
(5.0). To be certain of the number of  
devices that may be connected to a  
line, as determined by the total RENs,  
contact the telephone provider. e  
REN for this product is part of the  
product identifier that has the format  
US:AAAEQ##TXXXX. e digits rep-  
resented by ## are the REN without a  
decimal point (e.g., 03 is a REN of 0.3).  
If this equipment causes harm to the  
telephone network, the telephone com-  
pany will notify you in advance that  
temporary discontinuance of service  
may be required. But if advance notice  
isn't practical, the telephone company  
will notify the customer as soon as  
possible. Also, you will be advised of  
your right to file a complaint with the  
FCC if you believe it is necessary. e  
telephone company may make changes  
in its facilities, equipment, operations  
or procedures that could affect the  
As part of our commitment to  
protecting our  
environment and  
conserving natural  
resources, Uniden  
voluntarily participates  
in an RBRC® industry  
program to collect and  
recycle used Ni-MH batteries within  
the United States. Please call 1-800-8-  
BATTERY for information on Ni-MH  
battery recycling in your area. (RBRC®  
is a registered trademark of the  
Rechargeable Battery Recycling Corpo-  
ration.)  
Rechargeable batteries must  
be recycled or disposed of  
properly.  
Warning! The cords on this  
product and/or accessories  
contain lead, a chemical known  
to the state of California to  
cause birth defects or other  
reproductive harm. Wash hands  
after handling.  
Uniden works to reduce lead  
content in our products &  
accessories.  
Compliance Information  
FCC Part 68 Information  
is equipment complies with Part  
68 of the FCC rules and the require-  
ments adopted by the ACTA. On the  
bottom of this equipment is a label that  
contains, among other information,  
a product identifier in the format US:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢀꢃ  
 
operation of the equipment. If this  
happens the telephone company will  
provide advance notice in order for  
you to make necessary modifications  
to maintain uninterrupted service.  
Please follow instructions for repair-  
ing, if any (e.g. battery replacement  
section); otherwise do not substitute or  
repair any parts of the device except as  
specified in this manual. Connection  
to party line service is subject to state  
tariffs. Contact the state public utility  
commission, public service commis-  
sion or corporation commission for  
information. is equipment is hear-  
ing aid compatible.  
If you experience trouble with this  
equipment, contact the manufac-  
turer (see the cover of this manual for  
contact information) or an authorized  
agent. If the equipment is causing  
harm to the telephone network, the  
telephone company may request that  
you disconnect the equipment until  
the problem is resolved.  
If your home has wired alarm equip-  
ment connected to a phone line, be sure  
that installing the system does not dis-  
able your alarm equipment. If you have  
questions about what will disable alarm  
equipment, contact your telephone  
company or a qualified installer.  
Any changes or modifications to this  
product not expressly approved by the  
manufacturer or other party respon-  
sible for compliance could void your  
authority to operate this product.  
NOTICE: According to telephone  
company reports, AC electrical surges,  
typically resulting from lightning  
strikes, are very destructive to tele-  
phone equipment connected to AC  
power sources. To minimize damage  
from these types of surges, a surge ar-  
restor is recommended.  
FCC Part 15 Information  
is device complies with part 15 of  
the FCC rules. Operation is subject to  
the following two conditions: (1) is  
device may not cause harmful interfer-  
ence, and (2) is device must accept  
any interference received, including  
interference that may cause undesired  
operation. Privacy of communications  
may not be ensured when using this  
phone.  
FCC PART 15.105(b): Note: is  
equipment has been tested and found  
to comply with the limits for a Class  
B digital device, pursuant to part 15  
of the FCC Rules. ese limits are  
designed to provide reasonable protec-  
tion against harmful interference in  
a residential installation. is equip-  
ment generates, uses and can radiate  
radio frequency energy and, if not  
installed and used in accordance with  
the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that in-  
terference will not occur in a particu-  
lar installation. If this equipment does  
cause harmful interference to radio or  
television reception, which can be de-  
termined by turning the equipment off  
and on, the user is encouraged to try to  
correct the interference by one or more  
of the following measures:  
Reorient or relocate the receiving  
antenna.  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an outlet  
on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced  
radio/TV technician for help.  
FCC RF Exposure Information  
is product complies with FCC  
radiation exposure limits under the  
following conditions:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢄ - English  
e base must be placed to allow a  
minimum of 20 cm (8 inches) between  
the antenna and all persons during  
normal operation.  
Radio equipment  
e term IC before the radio certi-  
fication number only signifies that  
Industry Canada technical specifica-  
tions were met. Operation is subject  
to the following two conditions: (1)  
this device may not cause interference,  
and (2) this device must accept any  
interference, including interference  
that may cause undesired operation  
of the device. "Privacy of communica-  
tions may not be ensured when using  
this telephone".  
e base must not be collocated or  
operated in conjunction with any other  
antenna or transmitter.  
e handset is designed for body-  
worn operation and meets FCC RF  
exposure guidelines when used with  
any belt clip, carrying case, or other  
accessory supplied with this product.  
(All necessary accessories are included  
in the package; any additional or op-  
tional accessories are not required for  
compliance with the guidelines.) ird  
party accessories (unless approved by  
the manufacturer) should be avoided as  
these might not comply with FCC RF  
exposure guidelines.  
1-Year Limited Warranty  
Evidence of original purchase is  
required for warranty service.  
WARRANTOR: UNIDEN AMERICA  
CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden  
warrants, for one year, to the original  
retail owner, this Uniden Product to  
be free from defects in materials and  
craſtsmanship with only the limita-  
tions or exclusions set out below.  
Industry Canada (I.C.) Notice  
Terminal equipment  
NOTICE: is equipment meets the  
applicable Industry Canada Terminal  
Equipment Technical Specifications.  
is is confirmed by the registration  
number. e abbreviation IC before  
the registration number signifies that  
registration was performed based on a  
Declaration of Conformity indicat-  
ing that Industry Canada technical  
specifications were met. It does not  
imply that Industry Canada approved  
the equipment.  
NOTICE: e Ringer Equivalence  
Number (REN) for this terminal  
equipment is marked on the equip-  
ment itself. e REN assigned to  
each terminal equipment provides an  
indication of the maximum number of  
terminals allowed to be connected to  
a telephone interface. e termination  
on an interface may consist of any  
combination of devices subject only  
to the requirement that the sum of the  
Ringer Equivalence Numbers of all the  
devices does not exceed 5.  
WARRANTY DURATION: is  
warranty to the original user shall  
terminate and be of no further effect  
12 months aſter the date of original  
retail sale. e warranty is invalid if  
the Product is (A) damaged or not  
maintained as reasonable or necessary,  
(B) modified, altered, or used as part of  
any conversion kits, subassemblies, or  
any configurations not sold by Uniden,  
(C) improperly installed, (D) serviced  
or repaired by someone other than an  
authorized Uniden service center for a  
defect or malfunction covered by this  
warranty, (E) used in any conjunction  
with equipment or parts or as part of  
any system not manufactured by Un-  
iden, or (F) installed or programmed  
by anyone other than as detailed by the  
owner's manual for this product.  
STATEMENT OF REMEDY: In the  
event that the product does not con-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - ꢀꢅ  
 
form to this warranty at any time while  
this warranty is in effect, warrantor  
will either, at its option, repair or re-  
place the defective unit and return it to  
you without charge for parts, service,  
or any other cost (except shipping and  
handling) incurred by warrantor or its  
representatives in connection with the  
performance of this warranty. Warran-  
tor, at its option, may replace the unit  
with a new or refurbished unit. THE  
LIMITED WARRANTY SET FORTH  
ABOVE IS THE SOLE AND ENTIRE  
WARRANTY PERTAINING TO THE  
PRODUCT AND IS IN LIEU OF AND  
EXCLUDES ALL OTHER WARRAN-  
TIES OF ANY NATURE WHATSO-  
EVER, WHETHER EXPRESS, IM-  
PLIED OR ARISING BY OPERATION  
OF LAW, INCLUDING, BUT NOT  
LIMITED TO ANY IMPLIED WAR-  
RANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR  
PURPOSE. THIS WARRANTY DOES  
NOT COVER OR PROVIDE FOR THE  
REIMBURSEMENT OR PAYMENT  
OF INCIDENTAL OR CONSEQUEN-  
TIAL DAMAGES. Some states do not  
allow this exclusion or limitation of  
incidental or consequential damages  
so the above limitation or exclusion  
may not apply to you.  
shipping carton. e Product should  
include all parts and accessories  
originally packaged with the Product.  
Include evidence of original purchase  
and a note describing the defect that  
has caused you to return it. e Prod-  
uct should be shipped freight prepaid,  
by traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
As an Energy Star Partner,  
®
Uniden has determined  
that this product meets the  
Energy Star guidelines for  
®
energy efficiency. Energy  
Star is a U.S. registered mark.  
®
Uniden® is a registered trademark of  
Uniden America Corporation.  
e pictures in this manual are for  
example only. Your phone may not  
look exactly like the pictures.  
LEGAL REMEDIES: is warranty  
gives you specific legal rights, and  
you may also have other rights which  
vary from state to state. is warranty  
is void outside the United States of  
America and Canada.  
PROCEDURE FOR OBTAINING  
PERFORMANCE OF WARRANTY:  
If, aſter following the instructions in  
the owner's manual you are certain  
that the Product is defective, pack  
the Product carefully (preferably in  
its original packaging). Disconnect  
the battery from the Product and  
separately secure the battery in its  
own separate packaging within the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢆ - English  

Taylor Blender AM 1700 BL User Manual
Trane Thermostat CA8900 User Manual
Transition Networks Network Card SSDTF1011 105 User Manual
TRENDnet Security Camera TVIP322P User Manual
Ultra Products Personal Computer ULT31348 User Manual
Univex CD Player DB285USB User Manual
VistaQuest Digital Camera PC30I User Manual
Vivotek Security Camera PT3113 PT3123 User Manual
Vizio TV Antenna E390 B0 User Manual
Weed Eater Lawn Mower 157394 User Manual