CEZAI 998
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Selecting a Language for your
Parts of the Cordless Handset Charging
Selecting a Language for the Handset
Checking the Area Code Setting
Emergency Dialing From the Base & Cordless
Storing Names and Numbers for
Connecting the Cordless Handset and
Storing Caller ID Information to
[1] CONTENTS
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Ringer, Earpiece and
Remotely Operating Your Answering
Installing the Rechargeable Battery for
Setting the Record Time
Setting a Security Code or
w w w. u n i d e n . c o m
CONTENTS [2]
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on purchasing your new Uniden Corded/Cordless Telephone! Your new phone system
comes with a corded base unit and a cordless handset. The corded base allows you the convenience,
safety and security to make and receive calls during a power failure. In addition to the corded base, your
new phone has a full featured cordless handset and charger that can be placed anywhere in your home
where you have AC power and it does not require you to plug the handset in to a telephone line.
Note: Illustrations in this manual are used for explanation purposes.
Some illustrations in this manual may differ from the actual unit.
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporation.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need
customer service assistance or if you have any questions about how Uniden's products can accommodate
persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314.
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a
the "Accessibility" link.
[3] WELCOME/ACCESSIDBowILnloIaTdYfrom Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Terminology
The main part of the phone that
connects to your phone line and lets
you make and receive calls.
Corded
Handset
on the Base power failure.
A handset connected to the Base. It
can make and receive calls during a
Base
A cradle that charges the handset
battery. It connects to power but
does not connect to a phone line.
One touch speed dial key for your
most important or most frequently
called number.
Emergency
Dial
Charger
Caller ID is available from your
telephone provider. With this
service, you can see the name and
number of incoming callers.
A cordless handset that can be
placed anywhere in your home or
office where AC power is available.
Handset
Standby
CID
The handset is not in use. No line
has been activated. The corded
base handset is on the base and
[talk] on the base has not been
pressed. No dial tone is present.
The Caller ID that Talks. The base
will announce the name of incoming
callers if you subscribe to Caller ID
service.
CID
Announce
Caller ID on Call Waiting is available
from your telephone provider. With
this service, you can see incoming
caller information while on another
call.
The Cordless handset or base
phone.
Station
Talk
CIDCW
When a dial tone has been enabled
allowing the user to dial and carry on
a conversation with an outside party.
w w w. u n i d e n . c o m
TERMINOLOGY [4]
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Main Phone Features
• 5.8GHz Extended Range Technology
• Corded/Cordless Telephone System
• Visual Ringer
• One-Touch Emergency Dial in the Base and
Cordless Handset
• 4 One-touch Speed Dial Numbers in the Base
• 10 Speed Dial Numbers in the Cordless Handset
• Ringer Volume Control
• Earpiece Volume Control
• Audio Boost for the Cordless Handset
• Hearing Aid Compatible
• Large Backlit Keys
• Dual Keypad and Backlit Screens
• Make and Receive Calls During a Power Failure
• Integrated Answering Machine
• Base Speakerphone
• Caller ID and Caller ID on Call Waiting
• 50 Number Caller ID List
• Find Lost Handset
• Clock Display in the Base
• CID Announce - The Caller ID that Talks!
• Trilingual Display Options and Voice Prompts
(English, French and Spanish)
• Intercom Between Cordless Handset and Base
• Hold Feature
Answering Machine Features
• Digital Tapeless Recording
• Up to 15 minutes of Recording Time
• Call Screening
• Personal or Pre-recorded Outgoing Messages
• Time and Day Announcement
• Trilingual Display and Voice Prompts (English,
Spanish, or French)
• Remote Message Retrieval
• Toll Saver
• Message Alert
[5] PRODUCT OVERVIEW
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Base and Corded Handset
Top view
6. Base display
1 2
3
4 5 6 7
8
7. One-touch speed dial key [C]
8. One-touch speed dial key [D]
9. Corded base handset
10. Base speaker
9
11.
[
]
(play/stop) key
10
12. [ |<< ] (repeat/rewind) key
13. [ >>| ] (skip/forward) key
14. Curl cord
15
11
12
13
16
17
18
15.
[
]
(delete) key
19
20
16. [on/off] key / answer on/off light
17. [greet] key
21
14
18. [flash] key
19. [page/hold] key
20. [redial/pause] key
21. Base Emergency
[
]
key
222324 25
26 27
22. [menu/set] key
1. in use light
2. [cid] key
23. [select/+] key and [select/
-
]
key
24. [talk] key / speaker light
3. One-touch speed dial [A] key
4. One-touch speed dial [B] key
5. Base visual ringer
25.
[∗/tone] key
26. [#] key
27. Microphone
w w w. u n i d e n . c o m
PRODUCT OVERVIEW [6]
Download from Www.Somanuals.com. All Manuals Search And Download.
Side and Rear view
31
32 33 34
35
36
28
29
30
28. ringer tone button
33. DC IN 9V jack
29. ringer on/off switch
30. Curl cord jack
34. phone jack
35. Base antenna
36. Wall mount adapter
31. visual ringer hi/lo/off switch
32. CID Announce on/off switch
[7] PRODUCT OVERVIEW
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Cordless Handset
1. Handset antenna
2. audio boost on/off switch
3. Volume/ringer up [volume/ /+] key
4. Volume/ringer down [volume/
5. Handset battery compartment
6. Handset visual ringer
7. Handset earpiece
/
-
]
key
1
6
7
8. Handset display
9. [CID] key
2
22
23
10. [redial/pause] key
3
4
11.
[
∗
/tone/
]
key
8
12. [memory] key
13. [menu] key
14
9
15
16
10
14. [talk] key
15. Handset Emergency
16. [flash] key
[
]
key
5
17. [#/
18. [delete/channel] key
19. [select/intercom] key
]
(pound) key
11
12
13
17
18
19
20
21
20. Handset microphone and ringer speaker
21. Handset charging contacts
22. Headset jack
23. Beltclip hole
w w w. u n i d e n . c o m
PRODUCT OVERVIEW [8]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Using the Base Menus
• Press [menu/set] on the base to access the base main menu.
• Use [select/+] or [select/
-
]
to scroll through options.
• Press [menu/set] on the base to make a selection.
• For your convenience, voice prompts will guide you through
the base main menu (except LCD Contrast and Dial Mode
settings).
• To cancel your selection and return to standby, press
(play/stop) on the base.
[
]
• If you do not press a key within 30 seconds, the phone will
time out and exit the menu. When setting Day and Time, the
time-out period is extended to two minutes.
Using the Handset Menus
• Press [menu] on the cordless handset to access the main
menu.
• Use [volume/ /+] or [volume/
/
-
]
to scroll through the
select/
intercom
options.
• Press [select/intercom] on the cordless handset to make a
selection.
ꢀ#WVQꢀ6CNMꢀꢀꢁ1HH
ꢀ.CPIWCIGꢀꢀꢀꢁ'PI
ꢀ#TGCꢀ%QFGꢀꢀꢁ
• To return to standby, press [menu] on the cordless handset, or
return the cordless handset to the cradle.
w w w. u n i d e n . c o m
USING THE INTERFACE [10]
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When choosing a location for your new phone, here are some important guidelines you should consider:
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid television sets and other
electronic equipment
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or
shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
•
The location should be close to both a phone jack and a power outlet that is not connected to a wall switch.
• The base and handset should be kept away from sources of electrical noise such as motors, microwave
ovens, and fluorescent lighting.
• Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly.
• For better reception, place the base as high as possible.
• The base should be placed in an open area for optimum range and reception.
• If your home has wired alarm equipment connected to a phone line, be sure that installing the system
does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
contact your telephone company or a qualified installer.
[11] INSTALLING THE PDHowOnlNoadEfrom Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Connecting the Base and Corded Handset
1) Connect the corded handset curl cord to the left side of the phone
and to the corded handset.
2) Route the curl cord inside the molded wiring channel as shown.
3) Connect the AC adapter to the DC IN 9V jack and to a standard
120V AC wall outlet.
CAUTION: To avoid risk of fire and shock, only use the Uniden
AD-1007 AC adapter.
4) Route the AC adapter cord inside the molded wiring channel as
shown.
5) Connect the AC adapter to a continuous power supply (i.e., an
outlet that is not controlled by a switch).
6) Place the base unit close to the AC outlet to avoid long extension
cords.
7) Connect the telephone cord to the phone jack and to a telephone outlet.
8) Set the base on a desk or tabletop. Place the corded base handset in the
base cradle.
Tip: If your telephone outlet isn't modular, contact your telephone company
for assistance.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search AndIDNowSnlToaAd.LLING THE PHONE [12]
Testing the Connection
There’s an easy way to test your connection: try making a call from your base. If your call connects, your
phone’s settings are fine. If your call does not connect:
1) Check the AC adapter cord. Make sure it is securely connected to the DC IN 9V connector and to a
standard AC power outlet.
2) Change Dial Mode (Instructions below).
Changing the Dial Mode
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse
dialing. These days, most phone networks use a method called tone dialing, so your phone comes
programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your
phone’s dial mode. If you cannot connect to the telephone network, please follow the steps below to modify
your phone’s settings:
1) Press [menu/set] on the base.
2) Press [select/
then press [menu/set]
3) Press [select/+] or [select/
(the initial setting is TONE).
-
]
to move the pointer to select DIAL MODE, and
.
-
]
to select TONE or PULSE
4) Press [menu/set]. You will hear a confirmation tone.
[13] INSTALLING THE PDHowOnlNoadEfrom Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Adjusting the Visual Ringer Brightness
Your new phone has visual ringers located at the top of the base unit and at
the top of the cordless handset. These visual ringers will flash during
incoming calls, so if you are in a noisy work environment you will be able to
see when the phone is ringing. The phone comes with a switch for base
visual ringer control, so you can turn the visual ringers off when you do not
want the base to flash brightly during incoming calls.
The visual ringer hi/lo/off switch allows you to set the brightness and turn
off the visual ringer on the base. You can adjust the brightness by selecting
one of three options: high, low and off. If you set the switch to off, the visual
ringer on the base will not flash at all during incoming calls.
Turning CID Announce On/Off
Your new phone comes with a feature called CID Announce. If you
subscribe to Caller ID services from your telephone provider and when this
feature is turned on, your base unit will announce the name of the incoming
caller when you receive a call. You can turn this feature on or off by moving
the CID Announce on/off switch to the on or off position as desired.
Note: Your phone will only be able to announce the incoming caller
names when that information is available for that call. If a private caller
rings you, the announcement will say Private Caller.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search AndIDNowSnlToaAd.LLING THE PHONE [14]
Wall Mounting the Base
This phone can be mounted on any standard wall plate.
1) Remove the wall mount adapter from the base and snap it
into the notches on the bottom of the base.
2) Plug the AC adapter to the DC IN 9V jack.
CAUTION: To avoid risk of fire and shock, only use the
Uniden AD-1007 AC adapter.
3) Route the AC adapter cord inside the molded wiring channel as
shown.
4) Plug the AC adapter into a standard 120V AC wall outlet.
5) Plug the telephone cord into the phone jack.
6) Route the telephone cord inside the molded wiring channel as
shown.
7) Plug the telephone cord into the telephone outlet.
8) Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until he phone is firmly seated.
9) On the base unit, pull the handset retainer out of the slot.
Rotate it clockwise 180 degrees.
10)Flip the retainer from front to back. Slide it back into the slot
so that the lip of the retainer is up and the oval is down. The
retainer holds the handset in place.
[15] INSTALLING THE PDHowOnlNoadEfrom Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Direct Wall Mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and
handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring
device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and
screw heads for mounting the phone.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search AndIDNowSnlToaAd.LLING THE PHONE [16]
Connecting the Cordless Handset and Charger
The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically
when the handset is placed in the charger.
1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
CAUTION: Use only the Uniden AD-310 AC adapter.
2) Set the charger on a desk or tabletop, and place the
handset in the charger with the keypad facing forward.
3) Make sure that the charge light illuminates. If the
charge light does not illuminate, check to see that the
AC adapter is plugged in and the handset makes good
contact with the charging contacts.
4) Charge the handset battery pack for at least 15-20 hours before using your new cordless handset for
the first time.
5) To test your connection, try making a call from the cordless handset. If your call does not connect,
check to make sure the battery is fully charged. If you see LOW BATTERY on the cordless handset
display, check to make sure the battery is properly connected. To check the battery, slide the battery
compartment door open and check the battery cables to ensure a tight and proper connection. If your
handset still does not work, please contact Uniden’s Customer Service department. Please see back
cover for contact information.
[17] INSTALLING THE PDHowOnlNoadEfrom Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Installing the Beltclip
Line up the holes on each side of the cordless handset. To
attach the beltclip, insert into the holes on each side of the
handset. Press down until it clicks.
To remove the beltclip, pull either side of the beltclip to release
the tabs from the holes.
Installing the Optional Headset
Your cordless handset may be used with an optional headset. To use this feature,
insert the headset plug into the headset jack. Your phone is ready for hands-free
conversations. Headsets may be purchased by calling the Uniden Parts Department.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search AndIDNowSnlToaAd.LLING THE PHONE [18]
Base Setup
Selecting a Language for your Answering Machine and Base Display
You can set the language of your base menu display and answering machine announcements to English,
French, or Spanish.
1) Press [menu/set] on the base.
2) Press [select/
then press [menu/set]
3) Press [select/+] or [select/
-
]
to move the pointer to select LANGUAGE, and
.
-
]
to choose ENGLISH, FRANÇAIS
(French), or ESPAÑOL (Spanish).
4) Press [menu/set]. You will hear a confirmation tone.
Setting the Day and Time
To set the day and time on your phone, do the following:
1) Press [menu/set] on the base.
2) Press [menu/set] to select TIME. The system announces
"Time", the current time and the voice guidance for setting the
time.
3) Press [select/+] or [select/
-
]
to select the day of the week, and then press [menu/set]
.
4) Enter a two-digit number (01-12) to set hour, and then press [menu/set]
.
5) Enter a two-digit number (00-59) to set minute, and then press [menu/set]
.
[19] BASE SETUP
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
6) Press [select/+] or [select/
-
]
to choose AM or PM, and then press [menu/set]. You will hear a
confirmation tone.
Note: Use
[
]
(delete) to edit the hour and minute.
Adjusting the Base Display (LCD Contrast)
You can adjust the contrast or brightness of the text that appears on your base display. Choose one of ten
levels for optimum viewing.
1) Press [menu/set] on the base.
2) Press [select/
-
]
to move the pointer to select LCD CONTRAST
and then press [menu/set]
.
3) Press [select/+] or [select/
-
]
to adjust the contrast of the base
display.
4) Press [menu/set]. You will hear a confirmation tone.
Setting the Area Code
If in your local calling area you can make a local call by dialing only 7 digits (instead of 10), you can
program your local area code in your phone. Calls that come from within your area code will show only the
7-digit phone number; calls from outside your area code will show all 10 digits. To enter an area code,
follow the steps below:
1) Press [menu/set] on the base.
2) Press [select/
-
]
to move the pointer to select AREA CODE, and
then press [menu/set]
.
3) Press the number keypad [0-9] to enter a 3-digit area code.
w w w. u n i d e n . c o m
BASE SETUP [20]
Download from Www.Somanuals.com. All Manuals Search And Download.
4) If you press [menu/set], the stored number will be transferred to the cordless handset. If the transfer is
successful, you will hear a confirmation tone from the base and cordless handset.
Otherwise, AREA CODE SETTING FAILED! appears on the display and an error tone sounds. You will
have to start over with the procedure you are performing.
Note: If the area code has already been stored in memory, the stored area code will be displayed. To
change it, use
[
]
(delete) and the number keys to enter the new area code.
Setting Caller ID on Call Waiting (CIDCW)
Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call while you are on the
line.
1) Press [menu/set] on the base.
2) Press [select/
-
]
to move the pointer to select CIDCW, and then
.
press [menu/set]
3) Press [select/+] or [select/
-
]
to select ON or OFF, and then
press [menu/set]. You will hear a confirmation tone.
Handset Setup
Selecting a Language for the Handset Display
You can change the language the cordless handset will display. Choose from ENGLISH, FRENCH, or
SPANISH.
1) Press [menu] on the cordless handset.
ꢀ#WVQꢀ6CNMꢀꢀꢁ1HH
ꢀ.CPIWCIGꢀꢀꢀꢁ'PI
ꢀ#TGCꢀ%QFGꢀꢀꢁ
2) Press [volume/
/
-
]
to move the pointer to select LANGUAGE.
[21] HANDSET SETUP
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press [select/intercom] to toggle between ENG (English), FR. (French) and ESP (Spanish).
4) Press [menu] to complete the setting. The handset returns to standby.
Setting AutoTalk
AutoTalk allows you to answer the phone simply by removing the cordless handset from the cradle. You do
not have to press any keys to answer the call.
1) Press [menu] on the cordless handset.
ꢀ#WVQꢀ6CNMꢀꢀꢁ1HH
ꢀ.CPIWCIGꢀꢀꢀꢁ'PI
ꢀ#TGCꢀ%QFGꢀꢀꢁ
2) Press [select/intercom] to turn AutoTalk on.
3) Press [menu] to complete the setting. The handset returns to standby.
Checking the Area Code Setting from the Handset
If you have set a default area code in your base phone, your cordless handset will default to the same area
code setting. You can only check the Area Code number you have set. If you want to enter or edit the
1) Press [menu] on the cordless handset.
ꢀ#WVQꢀ6CNMꢀꢀꢁ1HH
ꢀ.CPIWCIGꢀꢀꢀꢁ'PI
ꢀ#TGCꢀ%QFGꢀꢀꢁꢂꢃꢄ
2) You can check the number entered in Area Code.
3) Press [menu]. The handset returns to standby.
w w w. u n i d e n . c o m
HANDSET SETUP [22]
Download from Www.Somanuals.com. All Manuals Search And Download.
Emergency Dialing From the Base & Cordless Handset
Your corded base phone and cordless handset comes with a
special Emergency Speed Dial
[
]
key that is already pre-
programmed to dial 911 when pressed.
This key can be re-programmed with another special emergency
dial number of your choice by following these steps:
1) With the phone in standby, press and hold the Emergency
Dial
[
]
key on the base or the cordless handset. If the Emergency
Dial number is already programmed, the Edit screen appears. You can
select EDIT NUMBER to edit this entry, select DELETE NUMBER to
erase this entry or select GO BACK to return to the previous screen.
3) Press [menu/set] on the base or [select/intercom] on the handset. You
will hear a confirmation tone, and NUMBER STORED appears. Memory
storage is complete.
Note:
• When editing the Emergency Dial number, you must press a key within
30 seconds or the phone will return to standby.
• The Emergency Dial number can be up to 48 digits on the base and up to 20 digits on the handset.
• When
• If you press
[23] EMERGENCY DIALING FROM THE BASE & CORDLESS HANDSET
[
]
on the base is pressed, base visual ringer tells you by flashing.
[
]
accidentally, press [talk] on the same station to cancel the dialing.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
One-touch Speed Dialing from the Base
The base has 4 one-touch speed dial locations ([A]
,
[B], [C] and [D]) that can be programmed for special or
frequently dialed numbers. Use the following steps to set up these speed dial numbers:
1) With the base in standby, press and hold [A] [B] [C] or [D].
,
,
If the key already has a number programmed, the Edit screen
appears. You can select EDIT NUMBER to edit this entry,
select DELETE NUMBER to erase this entry or select GO
BACK to return to the previous screen.
3) Press [menu/set] on the base. You will hear a confirmation
tone, and NUMBER STORED appears. Memory storage is
complete.
ꢀ0WODGTꢀ5VQTGF
# ꢁ
Note:
• When editing these Speed Dial numbers, you must press a key within 30 seconds or the phone will
return to standby.
• The One-touch Speed Dial number can be up to 48 digits.
To make a call from a one-touch speed dial, simply press one of the one-touch speed dial keys [A-D], and
your phone will automatically dial the number.
w w w. u n i d e n . c o m
ONE-TOUCH SPEED DIALING FROM THE BASE [24]
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dialing from the Cordless Handset
Your cordless handset allows you to store up to 10 names and numbers for quick and easy dialing of
frequently called numbers.
These 10 speed dials are not limited to just phone numbers. You can store any number (up to 20 digits)
that you need to enter once your call connects. This is referred to as Chain Dialing. For example, you can
save your bank account number to a speed dial. When you call your bank's telephone teller service and are
prompted to enter your account number, simply press [memory] and the speed dial number where you
stored your account number. Then press [select/intercom]. Or you can save and store prescription drug
information for fast and easy reordering with your pharmacy.
Note: When editing a Speed Dial, you must press a key within 30 seconds or the phone will return to
standby.
Storing Names and Numbers for Speed Dialing
1) With the phone in standby, press [memory]
.
ꢀ'ORV[
2) Enter [0-9] to select the speed dial number where you would like to store
this entry. You can also scroll through the list with [volume/ /+] or
[volume/
/-]. Press [select/intercom].
3) STORE NAME appears and a cursor flashes indicating that the display
is ready for the name to be entered.
[25] SPEED DIALING FROM THE CORDLESS HANDSET
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
If the selected speed dial number is already assigned, the Edit screen
appears. You can select MAKE A CALL to dial the number, select EDIT
MEMORY to edit this entry, select DELETE MEMORY to erase this
entry, or select GO BACK to choose another speed dial number.
/CMGꢁCꢁ%CNN
4) Enter a name according to the instructions below.
• The name can be up to 14 characters.
• Use
[
∗
/tone/
]
and [#/
]
to move the cursor to the desired location.
• Use [delete/channel] to delete characters as needed.
• Press and hold [delete/channel] to delete all the characters.
• If no name is required, go to step 5.
Refer to the letters on the number keys to select the desired characters.
Each time you press a numeric key, the displayed character appears in the following order: Upper
case letters first, lower case letters next and finally the number corresponding to the key.
If you make a mistake while entering a name
Use
Press [delete/channel] to erase the wrong character. Then enter the correct character. To delete all
characters, press and hold [delete/channel]
[
∗
/tone/
]
or [#/
]
to move the cursor to the incorrect character.
.
w w w. u n i d e n . c o m
SPEED DIALING FROM THE CORDLESS HANDSET [26]
Download from Www.Somanuals.com. All Manuals Search And Download.
For example, to enter Movies:
Number of times key is pressed
keys
1
2
3
4
5
6
7
8
9
1) Press [6] once to enter M.
1
Then press [#/
]
to move the cursor
2ABC
3DEF
4GHI
5JKL
to the right.
2) Press [6] six times to enter o.
3) Press [8] six times to enter v.
4) Press [4] six times to enter i.
5) Press [3] five times to enter e.
6) Press [7] eight times to enter s.
6
MNO
7
PQRS
8
TUV
9
WXYZ
0oper
5) Press [select/intercom]. STORE NUMBER is displayed. The cursor
flashes indicating that the display is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number can be up to
20 digits. If you need the phone to pause during the dialing sequence,
press [redial/pause] to insert a two-second pause between the numbers.
You can enter multiple pauses to increase the delay. Each pause counts
as a digit. The display shows a P for every pause.
Note: If the next character uses the same number key, you must press [#/
]
to move the cursor over.
Otherwise the next time you press the number key, it changes the character that was previously set.
[27] SPEED DIALING FROM THE CORDLESS HANDSET
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
7) Press [select/intercom]. You will hear a confirmation tone.
8) After about 2 seconds, the speed dial entries will appear.
9) Press [memory] to exit memory setup mode. The phone returns to
standby.
Storing Caller ID Information to Speed Dial Locations
Caller ID names & numbers shown in the Caller ID list can be stored to a speed dial location.
For instructions on viewing the Caller ID information, see page 42. If the Caller ID information did not
include the phone number, then you will not be able to store it.
Follow these steps to store a Caller ID name and number to a speed dial location:
1) Press [CID]. Select the phone number to be stored from the Caller ID list
by pressing [volume/ /+] or [volume/
/-].
2) Press [memory]
.
ꢀ'ORV[
w w w. u n i d e n . c o m
SPEED DIALING FROM THE CORDLESS HANDSET [28]
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Enter a number [0-9] or press [volume/ /+] or [volume/
/
-
]
to select the
memory location to be stored.
4) Press [select/intercom]. You will hear a confirmation tone, and the
number is stored in memory. The display returns to the Caller ID data.
Note: If a message has already been stored in the selected memory
number location, a confirmation screen is displayed. Press
[volume/ /+] to select YES. Press [select/intercom] to overwrite. The
display returns to the Caller ID data.
Using Your Phone
During a Power Failure
Because the phone is a corded/cordless combination phone, it can still perform several of its functions
during a power failure. The following features will function with base corded handset even during a power
failure:
-- Making and receiving calls with the base corded handset
-- Using your Emergency Dial
[
]
key after picking up the base corded handset
-- Using your one-touch speed dial [A-D] keys after picking up the base corded handset
-- Adjusting the volume (Base corded handset only)
-- Call Waiting (Base corded handset only)
-- Redialing the last number dialed (Base corded handset only)
All other features are disabled during a power failure.
[29] USING YOUR PHONE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
From the base
speakerphone*
From the base
corded handset
From the cordless handset
1) Pick up the handset from the cradle.
2) Press [talk]
3) Listen for the dial tone.
4) Dial the number.
OR
1) Press [talk]
.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Pick up the corded
handset.
2) Listen for the dial tone.
3) Dial the number.
OR
.
Making a
call
1) Remove the handset from the cradle. 1) Dial the number.
2) Dial the number.
3) Press [talk]
1) Dial the number.
2) Pick up the corded
handset.
2) Press [talk]
.
.
Note: To insert a two-second pause in the dialing sequence in standby, press [redial/pause]
.
A P appears in the display.
1) Pick up the handset from the cradle.
(If AutoTalk is on, the phone answers
automatically when you pick up the
handset from the charging cradle.)
Receiving a
call
Pick up the corded
handset.
2) Press [talk]
.
Press [talk]
.
.
OR
If the handset is off the cradle, press
[talk]. (If AutoTalk is on, you can press
any key in the twelve number keypad.)
Press [talk] or return the handset to the
cradle.
Return the corded
handset to the base.
Hanging Up
Press [talk]
* The base microphone is located under the base. Position yourself as close to the base as possible.
USING YOUR PHONE [30]
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching between the Base Speakerphone and Corded Handset During a Call
To switch a call from the corded handset on the base to the base speakerphone, press [talk] on the base.
To switch from a base speakerphone call to the base corded handset, pick up the corded handset.
Making a Call from the Base Emergency Dial or Speed Dial Locations
Simply press the Emergency Dial
[
]
key or one of the four (4) One-touch Speed Dial [A-D] keys on the
base, and your phone will automatically dial the number. To cancel, press [talk] on the base.
Making a Call from the Handset Emergency Dial or Speed Dial Locations
Simply press the Emergency Dial
[
]
key on the cordless handset and your phone will automatically dial the
number. To cancel, press [talk] on the cordless handset.
To dial one of the speed dial numbers, simply follow these steps:
1) Press [memory]. The handset displays your programmed speed dial
numbers.
2) Enter the number [0-9], or press [volume/ /+] or [volume/
/
-
]
to select
the speed dial number you would like to dial.
3) Press [talk] on the handset and the displayed number is dialed.
To cancel speed dialing
Press [talk] on the handset again to cancel speed dialing. The phone returns to standby. Also, if the phone
is idle (e.g., no key is pressed) for 30 seconds, the phone returns to standby.
Easy dialing
If you want to directly access the speed dial location, press and hold [0-9] when the handset is in standby,
and when the stored number appear, press [talk] on the handset.
[31] USING YOUR PHONE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call from a Caller ID Listing
You can place a call from the Caller ID list.
1) Press [cid] on the base or [CID] on the cordless handset.
2) Select the phone number that you want to dial by pressing [select/+] or
[select/
-
]
on the base, or [volume/ /+] or [volume/
/
-
]
on the handset.
3) To have the phone dial a 1 before the displayed Caller ID number for placing a long distance call,
press [1]. To have the phone dial the stored area code before the displayed Caller ID number,
press [3]
.
4) Press [talk] on the base or handset or remove the corded handset from the base. The displayed phone
number dials automatically.
Note:
• You can also press [talk] on the base or handset or remove the corded handset from the base before
finding the phone number you want to dial. When you come to the phone number you want to dial,
press [menu/set] on the base or [select/intercom] on the handset.
• You cannot make a call from the Caller ID list if your cordless phone is connected to a private branch
exchange (PBX).
Call Waiting
If you subscribe to Call Waiting service, you can receive calls while on the line.
1) If a call comes in while you are on the phone, you will hear a call waiting tone. If you have CIDCW
activated, you will see the name and number of the incoming caller.
w w w. u n i d e n . c o m
USING YOUR PHONE [32]
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Press [flash] on the base or cordless handset to accept the
waiting call. After a short pause, you will hear the new caller.
3) To return to the original caller, press [flash] on the base or
handset again.
Tip: You must subscribe through your local telephone
company to receive Call Waiting service.
Redialing the Last Number Dialed
From the cordless handset
From the base speakerphone
From the base corded handset
1) Pick up the handset from the
cradle.
1) Press [talk]
.
1) Pick up the corded handset.
2) Listen for the dial tone.
2) Listen for the dial tone.
2) Press [talk]
.
3) Press [redial/pause]
OR
.
.
3) Press [redial/pause]
OR
.
3) Listen for the dial tone.
4) Press [redial/pause]
.
OR
1) Press [redial/pause]
1) Press [redial/pause]
.
1) Pick up the handset from the
cradle.
2) Press [talk]
.
2) Pick up the corded handset.
2) Press [redial/pause]
3) Press [talk]
.
.
[33] USING YOUR PHONE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Base Ringer
Ringer on/off: The ringer on/off switch allows you to set the base ringer
on or off. If you set the switch to off, the base ringer will be silent.
Ringer tone: Press the ringer tone button in standby to select one of 7 ring
tones.
Ringer volume: The base has ten settings for ringer volume.
1) With the phone in standby, press [select/+] or [select/
-].
2) The base will sound the ringer volume at the selected setting and
display the new ringer volume.
Adjusting the Handset Ring Tone and Volume
Your cordless handset has two different ring tones (A and B) and two different
volumes for each (low and high).
1) With the phone in standby, press [volume/ /+] or [volume/
/
-
]
to cycle through
Ringer A High, Ringer A Low, Ringer B High, Ringer B Low, and Ringer off.
2) The phone will sound the different ring tones at different volumes. To turn the
ringer off, select Ringer Off.
w w w. u n i d e n . c o m
USING YOUR PHONE [34]
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Earpiece and Speaker Volume
Base Speakerphone: You can select eight different volume levels for the base speaker. To adjust the base
speaker volume while on a call, press [select/+] (to make it louder) or [select/
-
]
(to make it softer). This
setting will remain in effect after the telephone call has ended.
Base Corded Handset: You can select the earpiece volume from among four volume levels. To adjust the
earpiece volume of corded handset while on a call, press [select/+] (to make it louder) or [select/
-
]
(to make
it softer). This setting will remain in effect after the telephone call has ended.
Cordless Handset: You can select the earpiece volume from among four volume levels. To adjust the
earpiece volume of cordless handset while on a call, press [volume/ /+] (to make it louder) or
[volume/
/
-
]
(to make it softer). This setting will remain in effect after the telephone call has ended.
Temporarily Muting the Base Ringer
To mute the ring tone temporarily for the base, when the phone is ringing, press
[
]
(play/stop) on the
base. The mute will last for the current incoming call only. The ring tone will return to the previous setting
starting with the next incoming call.
Audio Boost for the Cordless Handset
This feature allows you to hear phone conversations more clearly by boosting the high
audio frequency tones.
To set audio boost on, slide the audio boost on/off switch upward. BOOST ON appears
on the handset display under the volume setting when you start a call. To set audio boost
off, slide the audio boost on/off switch downward.
[35] USING YOUR PHONE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Different Channel
If you encounter interference while using your cordless handset, you can manually change the handset's
channel for clear operation. While using your handset, press [delete/channel]. SCANNING appears on the
display, indicating the handset is changing to another channel. For more information on interference, refer
Finding the Lost Handset
If you misplace the cordless handset, press [page/hold] on the base. The visual ringer
on the cordless handset flashes, and the cordless handset will beep for 60 seconds.
To cancel a find handset page, press [page/hold] on the base. Paging is also canceled
when the phone receives an incoming call.
Placing a Call on Hold from the Base
1) During a call from the base, press [page/hold]. The call will be put on hold.
2) To return to the call, press [page/hold] again, pick up the corded handset or press [talk] on the base. To
talk to the caller from the cordless handset, press [talk] on the cordless handset.
Note:
• You can place a call on hold for ten minutes. When ten minutes has passed, the call is disconnected,
and the phone automatically returns to standby.
• You can return the corded handset to the base while a call is on hold, and the call will remain on hold.
w w w. u n i d e n . c o m
USING YOUR PHONE [36]
Download from Www.Somanuals.com. All Manuals Search And Download.
Conferencing
With this phone system, up to three people can participate in a
conference call while using an outside line, the cordless
handset, and the base.
Joining a Conference Call
You can easily join a call already in progress.
From the base
speakerphone
From the base
corded handset
From the cordless handset
Joining the During a call from the base,
conference press [talk] on the handset.
call
During a call from the cordless During a call from the cordless
handset, press [talk] on the
handset, pick up the corded
base handset.
base.
Press [talk] on the handset or Press [talk] on the base.
Exiting the return the handset to the
conference cradle.
call The base will still be
connected to the call.
Return the corded handset to
The cordless handset will still the base cradle.
be connected to the call.
The cordless handset will still
be connected to the call.
[37] USING YOUR PHONE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom
The intercom feature lets you communicate between the cordless handset and base without using the
phone line. You can make an intercom call while an outside caller is on hold; making an intercom call will
not terminate the call on hold. If the party does not answer within one minute, the operation is canceled.
Making an Intercom Page
From the base
speakerphone
From the base
corded handset
From the cordless handset
1) Press [select/intercom]
.
1) Press [page/hold]
.
1) Press [page/hold].
2) The base will be paged.
An intercom tone sounds.
To cancel the Page:
Press [select/intercom] or
return the handset to the
cradle.
2) The handset will be paged.
An intercom tone sounds.
3) Pick up the corded handset.
To cancel the Page:
2) The handset will be paged.
An intercom tone sounds.
To cancel the Page:
Making an
Intercom
Page
(in standby)
Press [page/hold] or [talk]
.
Press [page/hold] or return the
corded handset to the base.
1) Press [select/intercom]
.
1) Press and hold [page/hold]. 1) Press and hold [page/hold].
2) The call will automatically
be placed on hold, and the
paging tone sounds.
2) The call will automatically
be placed on hold, and the
paging tone sounds.
2) The call will automatically
be placed on hold, and the
paging tone sounds.
Making an
Intercom
Page
(During a
call)
To cancel the Page:
To cancel the Page:
To cancel the Page:
Press [select/intercom] or
[talk]
.
Press [page/hold] or [talk]
.
Press [page/hold].
w w w. u n i d e n . c o m
USING YOUR PHONE [38]
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering and Hanging up an Intercom Page
On the cordless handset
With the base
speakerphone
With the base
corded handset
1) Pick up the handset from the cradle.
(If AutoTalk is on, the phone answers
automatically when you pick up the handset
from the charging cradle.)
Answering
an Intercom
Page
Press [page/hold] or Pick up the corded
2) Press [select/intercom] or [talk]
.
OR
[talk]
.
handset.
If the handset is off the cradle, press
[select/intercom] or [talk]
.
(If AutoTalk is on, you can press any key in the
twelve number keypad.)
Hanging up
Return the corded
an Intercom Press [select/intercom] or [talk]
.
Press [talk].
handset to the base.
Page
Transferring a Call
You can transfer a call from one station to another. You may also place a call on hold, intercom page the
other station and then transfer the call to that station.
During a call, press and hold [page/hold] on the base or press [select/intercom] on the cordless handset.
To transfer the call, the other station must answer. The station transferring the call may now hang up.
[39] USING YOUR PHONE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch
to tone dialing after the call connects. This feature is useful when
you need tone dialing to use automated menu systems, such as
telephone bank tellers, telephone prescription refills, customer
support menus, etc.
select/
intercom
If your phone is set to pulse dialing, make your call normally.
Once your call connects, press
[∗/tone] on the base or
press /tone/ on the cordless handset. Any digits you enter
[
∗
]
from then on will be sent as tone dialing. When this call ends, the
phone automatically returns to pulse dialing.
w w w. u n i d e n . c o m
USING YOUR PHONE [40]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Caller ID and Call Waiting
If you subscribe to Caller ID service from your telephone company, your phone will show you the caller’s
phone number and name (if available) whenever a call comes in. If you subscribe to both Caller ID and Call
Waiting, the phone will show you the name and number of any call that comes in while you are on the line.
Caller ID information is stored for up to 50 incoming calls - even unanswered calls. With Caller ID on Call
Waiting (CIDCW), you will hear a Call Waiting tone while you are on a call, to accept the waiting call, press
[flash] on the base or cordless handset (see page 32). Additionally, you can dial a number stored in the
Caller ID list or save the information to one of your speed dial locations.
Today US telephone carriers only support the transmission of 15 characters for the Caller ID name;
therefore, if someone calls you with a name longer than 15 characters, it will be common for it to be
truncated to 15 characters only. Also, you may not receive your caller ID information if you answer the call
before the second ring. When you receive a call from a PBX (Private Branch eXchange), the caller’s phone
number and name may not appear or you may see a common phone number for that PBX system. This is
normal operation when receiving caller ID information from a PBX.
Base
You may receive any one of the following messages:
Caller's name
When invalid data is received;
When a private name is received;
When a private number is received;
INCOMPLETE DATA
PRIVATE NAME
PRIVATE NUMBER
,CPGꢀ5OKVJ
Caller's
phone number
ꢁꢂꢃꢄꢅꢅꢅꢄꢂꢁꢆꢃ
When an unknown name is received; UNKNOWN NAME
When an unknown number is received; UNKNOWN NUMBER
Cordless Handset
The date and
time received
Note: Data errors will appear on the display as " ."
Caller's name
Caller's phone number
[41] USING CALLER ID AND CALL WAITING
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CID Announce (Base Only)
The CID Announce feature is a Caller ID that Talks and verbally announces from the base the name of
incoming callers when you receive a call. To use this feature, you must subscribe to Caller ID service from
your telephone company and you must have the CID Announce switch set to on.
Viewing Caller ID Information
With a Caller ID subscription from your local telephone company, you have two different ways to view
Caller ID information. The first way is to look at your cordless handset or base unit when you receive an
incoming call. The second is to view your Caller ID history list. To view your CID list, follow these steps:
1) With the phone in standby, press [CID] on the cordless handset ([cid] on
the base). The summary screen appears. The screen shows the
number of new messages and total messages.
2) To view the Caller ID information in historical order (from new to old or
from old to new), use [volume/
/
-
]
on the cordless handset ([select/-]
on the base) to scroll through the data from the latest to the earliest, or
[volume/ /+] on the cordless handset ([select/+ ] on the base) to scroll
back through the messages.
3) To finish viewing the CID information, press [CID] on the cordless handset ([cid] on the base).
While viewing Caller ID information from your CID list, you may notice that a number will appear next to the
received time of some Caller ID information. This indicates the number of times that you have received a
call from that number. Once you view the information, the number will be cleared.
w w w. u n i d e n . c o m
USING CALLER ID AND CALL WAITING [42]
Download from Www.Somanuals.com. All Manuals Search And Download.
While viewing or deleting Caller ID information, if you do not press a key within 30 seconds, an error tone
will sound and your phone will return to standby. Also, if you receive an incoming call or intercom page
while viewing Caller ID information, your operation will be canceled allowing you to answer the call or
intercom page.
Deleting Information from the Caller ID List
The cordless phone stores up to 50 Caller ID names and numbers. If the phone receives the 51st Caller ID,
the oldest one in the list is automatically deleted. Individual Caller ID data can also be deleted manually by
following these steps:
1) Press [CID] on the cordless handset ([cid] on the base) while in standby.
2) Find the message to be deleted from the Caller ID list by pressing
[volume/ /+] or [volume/
[select/ on the base).
/
-
]
on the cordless handset ([select/+ ] or
-
]
3) Press [delete/channel] on the cordless handset (
[
]
(delete) on the
base).
4) Press [volume/ /+] on the cordless handset ([select/+ ] on the base) to
select YES, and then press [select/intercom] on the cordless handset
(
[menu/set] on the base).
You will hear a confirmation tone.
[43] USING CALLER ID AND CALL WAITING
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
To Delete the entire Caller ID List:
1) Press [CID] on the cordless handset ([cid] on the base) while in standby.
2) Press [delete/channel] on the cordless handset (
[
]
(delete) on the
&GNGVGꢀ#NN!
ꢀ;GU
ꢀ0Q
base).
3) Press [volume/ /+] on the cordless handset ([select/+ ] on the base) to
select YES, and then press [select/intercom] on the cordless handset
(
[menu/set] on the base).
You will hear a confirmation tone and all Caller ID information is
deleted.
w w w. u n i d e n . c o m
USING CALLER ID AND CALL WAITING [44]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Answering Machine
The phone has a built-in answering machine that answers and records incoming calls.
You can also use your system to announce a special outgoing message to callers when you are away from
your phone.
Features
• Digital Tapeless Recording
• Up to 15 minutes of Recording Time
• Call Screening
• Personal or Pre-recorded Outgoing Messages
• Trilingual Display and Voice Prompts (English, Spanish, or French)
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Message Alert
Selecting a Language
You can set the language of your base menu display and answering machine announcements to English,
[45] SETTING UP THE ADNowSnlWoadEfrRomIWNwGw.SMomAanCuaHls.cIoNm.EAll Manuals Search And Download. w w w. u n i d e n . c o m
Setting the Record Time (or Announce Only)
You can select how long a caller has to record a message. You have three record time options. The options
1 MINUTE or 4 MINUTES set the duration for recording the incoming messages. ANNOUNCE ONLY
answers the call and plays either your personal greeting or the pre-recorded system greeting, but prevents
the caller from leaving a message.
1) Press [menu/set] on the base.
2) Press [select/
and then press [menu/set]
3) Press [select/+] or [select/ to select Record Time 1 MINUTE,
-
]
to move the pointer to select RECORD TIME,
.
-
]
4 MINUTES, or ANNOUNCE ONLY.
4) Press [menu/set]. You will hear a confirmation tone.
Note:
• For your convenience, voice prompts will guide you through the menus.
• Press
[
]
(play/stop) on the base to return to standby.
• If you do not press a key within 30 seconds, the phone will time out and exit the menu.
Activating Call Screening
Your phone allows you to listen to callers leaving you a message. This feature can be turned on or off with
the following steps:
1) Press [menu/set] on the base.
2) Press [select/
-
]
to move the pointer to select CALL
SCREENING, and then press [menu/set]
.
w w w. u n i d e n . c o m
SETTING UP THE ANSWERING MACHINE [46]
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press [select/+] or [select/
-
]
to select ON or OFF.
4) Press [menu/set]. You will hear a confirmation tone.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine
plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable
the Toll Saver, the answering machine picks up after two rings if you have new messages and after four
rings if there are none.
1) Press [menu/set] on the base.
2) Press [select/
then press [menu/set]
3) Press [select/+] or [select/
-
]
to move the pointer to select RING TIME, and
.
-
]
to select a Ring Time (TOLL
SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
4) Press [menu/set]. You will hear a confirmation tone.
Activating the Message Alert
The Message Alert feature sounds a short alert tone every 15 seconds whenever you have a new
message. Once all new messages have been played, the alert tone automatically stops beeping until you
receive another new unplayed message.
1) Press [menu/set] on the base.
2) Press [select/
-
]
to move the pointer to select MESSAGE
ALERT, and then press [menu/set]
.
[47] SETTING UP THE ADNowSnlWoadEfrRomIWNwGw.SMomAanCuaHls.cIoNm.EAll Manuals Search And Download. w w w. u n i d e n . c o m
3) Press [select/+] or [select/
-
]
to select ON or OFF.
4) Press [menu/set]. You will hear a confirmation tone.
To quickly turn off the Message Alert tone, press any key on the base unit; the tone will automatically quiet
until you receive another new message.
Setting Your Greeting
When you receive a call, the answering machine automatically plays either the pre-recorded message or
your own greeting. Your answering machine comes with the following pre-recorded message:
"Hello, no one is available to take your call. Please leave a message after the tone."
Or you can record your own personal outgoing greeting. Your recorded greeting must be between 2
seconds and 30 seconds long. Once you have recorded a personal greeting, you can switch back and forth
between the pre-recorded greeting and your own personal greeting.
To Record a Personal Greeting:
1) Press [greet]. While the pre-recorded message is playing,
press and hold [greet] again. You will hear the announcement
"Record greeting" and a confirmation tone.
If you already have a greeting recorded, you can delete the current one and then record a new
greeting. While the current greeting is playing, press
[
]
(delete). And then start over with the first.
w w w. u n i d e n . c o m
SETTING UP THE ANSWERING MACHINE [48]
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Start recording your message. You will have 30 seconds, and the message counter will count down.
When you are finished recording your greeting, press [greet] (play/stop) or [menu/set]. You will
,
[
]
hear a confirmation tone, and then your greeting plays back for you.
Note:
• Position yourself as close to the base as possible and speak clearly when recording your greeting.
• If you make an outside call or a call is received during the new greeting recording, the operation is
canceled.
• The greeting must be more than two seconds long, or it will not be recorded.
• To delete the personal greeting, press
[
]
(delete) while the message is playing. The system
announces "Greeting has been deleted."
Selecting Your Greeting
You can switch back and forth between your personal greeting and the pre-recorded system greeting. With
the phone in standby, press [greet]. Then press [greet] again while the outgoing greeting is played. This
switches between the prerecorded greeting and the personal greeting. After your greeting selection plays
back, a confirmation tone is heard.
Setting a Security Code or Personal Identification Number (PIN)
To play your messages from a remote location outside of your home, you will need to enter a two-digit
Security code or Personal Identification Number (PIN).
1) Press [menu/set] on the base.
2) Press [select/
-
]
to move the pointer to select SECURITY
CODE, and then press [menu/set]
.
[49] SETTING UP THE ADNowSnlWoadEfrRomIWNwGw.SMomAanCuaHls.cIoNm.EAll Manuals Search And Download. w w w. u n i d e n . c o m
3) Enter a two-digit Security or PIN code (01-99) using the number keypad. To change the number, use
(delete) to backspace.
[
]
4) Press [menu/set]. You will hear a confirmation tone.
Using Your Answering Machine
The message counter on the base display will show the number of messages you have waiting. If NEW
appears in the base display and flashes, you have new messages waiting that you have not yet listened to.
The answering machine will play all of your new messages first and then play any old messages that you
have not yet deleted from the system.
Turning your Answering System On & Off
Turning On
Turning Off
1) With the phone in standby, press 1) With the phone in standby, press
[on/off] on the base.
[on/off] on the base.
2) The system announces
"Answering System is on" and
plays the current greeting.
3) The answer on/off light will be
illuminated. If the answer on/off
light flashes, then you have new
messages waiting.
2) The system announces
"Answering System is off".
3) The answer on/off light will no
longer be illuminated.
Note: When the answering machine is full, FL appears on the base display. You should delete some
messages so that the system can record new messages.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. AllUMaSnuIaNlsGSeaYrchOAUndRDowAnlNoadS. WERING MACHINE [50]
Reviewing Messages
The base display indicates the number of messages you have waiting. When you have new messages, the
answer on/off light on the base will flash and NEW will appear in the base display and flash. The
answering machine plays your new messages first. After you listen to all of your new messages, you can
then play your old messages.
To review your messages from the base:
With the phone in standby, press
and old messages. It announces the message number, plays the message, then announces the
time and date it was received.
[
]
(play/stop). The system announces the number of new
Playing
messages
Press [ |<< ] (repeat/rewind) once to go to the beginning of the current message. Press [ |<< ]
(repeat/rewind) repeatedly to go back to a previous message. Press and hold [ |<< ] (repeat/
rewind) to rewind through the current message.
Repeating a
message
Skipping a Press [ >>| ] (skip/forward) to go to the beginning of the next message. Press and hold [ >>| ]
message
(skip/forward) to fast forward through the current message.
Deleting a
message
While a message is playing, press (delete). The message is permanently deleted.
[
]
Deleting all While the phone is in standby, press
[
]
(delete). When the system asks you to confirm, press
messages
[
]
(delete) again. All messages are permanently deleted.
Ending the
message
review
Press
[
]
(play/stop) at any time to stop the message playback and return to standby. The
message counter shows the number of messages stored in memory.
Note: You can not delete unheard messages. If you try to delete messages before listening to them, the
answering machine will beep and say "Please playback all messages."
[51] USING YOUR ANSWERING MACHINE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Screening Calls
Your phone allows you to listen to callers leaving a message without answering the phone. You can always
hear callers from the base speaker. To screen an incoming call, make sure your phone has Call Screening
• To adjust the volume, press [select/+] or [select/
• To answer the call, pick up the corded handset or press [talk] on the base.
• To mute the Call Screen, press (play/stop).
• To cancel muting, press [select/+] or [select/
-
]
on the base.
[
]
-
].
• If you turn the answering system off, you cannot screen a call.
Remotely Operating Your Answering Machine
You can access your answering machine while you are away from home to check, play, delete messages
or even record a new greeting or turn your answering machine on and off. Once you enter the remote
access menu, you must enter a command within 15 seconds, or the system automatically hangs up and
returns to standby. For your convenience remote operation cards, located on page 72, are provided for you
to use while away from home.
To remotely operate your answering machine from any touch-tone telephone:
1) Call your telephone number.
3) The system announces the current time and the number of messages stored in memory. Then you
hear "To play incoming messages, press zero two. For help, press one zero."
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. AllUMaSnuIaNlsGSeaYrchOAUndRDowAnlNoadS. WERING MACHINE [52]
4) You may continue to listen to the voice prompts, or you may select a command from the following
chart:
Command
[0] then [1]
[0] then [2]
[0] then [3]
[0] then [4]
[0] then [5]
Function
Command
[0] then [6]
[0] then [7]
[0] then [8]
[0] then [9]
[1] then [0]
Function
Repeat a Message
Play incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Memo Record/Stop*
Greeting Message Record/Stop*
Answering System Off
Voice Prompts
* For Memo Record and Greeting Message Record, the first time you enter the corresponding command,
it starts the recording automatically. If you want to stop the recording, enter the command again.
5) After all of the voice prompts have been played, you will hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this time from the chart.
6) When you are finished, hang up to exit. The system automatically returns to standby.
Note:
• If you enter an incorrect security code three times, you will hear a beep and the system will return to
standby.
• The voice memo messages are recorded as incoming messages.
• When the answering system is full, you cannot record a voice memo message until you clear some
messages from the memory.
[53] USING YOUR ANSWERING MACHINE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
Operation Temperature
-10°C to +50°C (+14°F to +122°F)
For the Base
AD-1007
For the Charger
AD-310
Part Number
Input Voltage
Output Voltage
Part Number
Capacity
AC Adapter
120V AC, 60Hz
9V DC @500mA
BT-905
120V AC, 60Hz
9V DC @210mA
Handset Battery
Frequency
600mAh, 3.6V DC
925.181424 - 927.451379 MHz
5739.320225 - 5746.130091 MHz
Note: To avoid damage to the phone use only Uniden AD-1007, AD-310 and BT-905 with your phone.
Power Failure
During a power failure, you can make and receive calls with the base corded handset; however, you will not
be able to use the base speakerphone or the cordless handset. The following features are available with
the base corded handset during a power failure:
• Corded Volume Control
• Emergency Key
• 4 One-touch dial Keys
• Redial
• Flash
• A special ring tone will sound during a power
failure and you will not be able to control the
volume setting of this ring.
• Pause
w w w. u n i d e n . c o m
MAINTENANCE [54]
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Life
With average use, your battery talk time will be approximately 5 hours and standby time will be
approximately 10 days. For optimum performance, be sure to return the cordless handset to the charging
cradle after each call. If the cordless handset is left off of the charger, the actual talk time duration will be
reduced respective to the amount of time the handset is off the cradle.
Note: Do not place the power cord where it creates a trip hazard or where it could become chafed and
create a fire or electrical hazard.
Low battery alert
When the battery pack is very low, the cordless handset is programmed to
eliminate functions in order to save power. The battery pack needs to be
charged when the cordless handset shows LOW BATTERY CHARGE
%JCTIGꢀ*CPFUGV
HANDSET. None of the cordless handset keys will operate until the cordless
handset is fully charged. If you are on a call and LOW BATTERY appears,
complete your conversation as quickly as possible, and return the handset
to the charger.
Battery Replacement and Handling
With normal use, your cordless phone's battery should last approximately one year. To order replacement
contact information.
Note: When replacing batteries, the information stored in the phone's memory will only be retained for
30 minutes after the battery pack is removed. This includes volume, ringer tone and last number dialed.
You will want to replace the battery as quickly as possible in order to avoid losing your cordless
handset settings.
[55] MAINTENANCE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only
use the Uniden battery model and Uniden adapter model specifically designated for this product.
Caution:
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the batteries from the handset to charge it.
• Never throw the battery into a fire, disassemble, or heat it.
• Do not remove or damage the battery casing.
Installing the Rechargeable Battery for Cordless Handset
1) Press down on the cordless handset battery case
cover (use the finger indention for a better grip) and
slide the cover downward to remove.
2) Plug the battery pack connector (red & black wires)
into the jack inside the battery compartment. (The
connector notches fit into the grooves of the jack only
one way.) Match the wire colors to the polarity label
in the battery compartment, connect the battery and
listen for a click to insure connection.
3) Make sure you have a good connection by slightly
pulling on the battery wires. If the connection is
secure, the battery jack will remain in place.
4) Place the battery case cover back on the handset
and slide it upwards until it clicks into place.
Note: Use only the Uniden BT-905 rechargeable battery pack supplied with your cordless telephone.
w w w. u n i d e n . c o m
MAINTENANCE [56]
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Battery Charging Contacts
To maintain a good charge, clean the charging contacts on both the cordless handset and charger once a
month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all
visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle.
Caution:
Do not use paint thinner, alcohol, or other chemical products.
Doing so may discolor the surface of the telephone and damage the finish.
[57] MAINTENANCE
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Traveling Out of Range
During a call, if you move your cordless handset too far away from your base, noise may increase. If you
pass the range limits of the base, your call will terminate within one minute.
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do
not solve your problem, please call our Customer Service Hotline. Please see the back cover page for
contact information.
Symptom
Suggestion
The charge light won't
illuminate when the
• Make sure the AC adapter is plugged into the cradle and wall outlet.
• Make sure the cordless handset is properly seated in the cradle.
cordless handset is placed • Make sure the charging contacts on the cordless handset and charger are
in the cradle.
clean.
•
•
•
Move the handset and/or base away from metal objects or appliances and try again.
Press [delete/channel] during a call to help eliminate background noise.
Make sure that the cordless handset is not too far from the base.
The audio sounds weak
and/or scratchy.
• Check both ends of the telephone cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
Can't make or receive calls. • Disconnect the AC adapter for a few minutes. Then reconnect it.
• Make sure that the cordless handset is not too far from the base.
• Check the dialing mode used by your telephone company.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And DownloTadR. OUBLESHOOTING [58]
Symptom
Suggestion
During power failure, can't • Make sure to use corded handset to make or receive a call.
make or receive a call.
• Make sure that telephone cord is firmly connected.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The cordless handset may be too far from the base unit.
• Place the base unit away from appliances or metal objects.
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume is not set to off.
The cordless handset
doesn't ring or receive an
intercom page.
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
Severe noise interference.
• Move the base to another location or turn off the source of interference.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• Your Caller ID service may not be active; contact your local telephone service
provider.
The Caller ID does not
display.
The answering machine
does not work.
• Make sure the AC adapter is plugged into a wall outlet.
• Make sure the answering machine is turned on.
The answering machine
does not record any
messages.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
[59] TROUBLESHOOTINDGownload from Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Symptom
Suggestion
• The incoming messages may be too long. Remind callers to leave a brief
message.
Messages are incomplete.
•The memory may be full. Delete some or all of the saved messages.
After a power failure, the
outgoing message is
deleted.
• Record your personal outgoing message again. The default message should
remain.
No sound on the base
speaker during call
monitoring or message
playback.
• Adjust the speaker volume on the base.
• Make sure the call screen feature is set to on.
• Make sure you are using the correct PIN code.
Cannot access remote call-
in features from another
touch tone phone.
• Make sure that the touch-tone phone you're using can transmit the tone for at
least two seconds. If it cannot, you may have to use another phone to access
your phone.
• Check to make sure the CID Announce switch on the back of the base is set to
ON.
• Check your base speaker volume to ensure it is loud enough to hear the CID
Announce feature.
CID Announce feature is
not announcing new
incoming calls.
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And DownloTadR. OUBLESHOOTING [60]
Liquid Damage
Moisture and liquid can damage your cordless phone.
• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected,
wipe off the liquid, and use as normal.
• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has
entered the handset battery compartment or vent openings on the base), follow the steps below:
Cordless Handset
Base
1) Remove the battery cover and leave it off for
ventilation.
1) Disconnect the AC adapter from the base, cutting
off electrical power.
2) Disconnect the battery pack. Leave the battery
cover off and the battery pack disconnected for at
least 3 days.
2) Disconnect the telephone cord from the base.
3) Let dry for at least 3 days.
3) Once the handset is completely dry, reconnect the
battery pack and the battery cover.
4) Recharge the handset's battery pack for 15 to 20
hours before using.
IMPORTANT:
You must unplug the telephone line while recharging the battery packs to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to
the handset, base and the microwave oven. After following these steps, if your cordless telephone does
information.
[61] TROUBLESHOOTINDGownload from Www.Somanuals.com. All Manuals Search And Download. w w w. u n i d e n . c o m
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
Precautions!
Before you read anything else, please note the
following:
Warning!
• Uniden voluntarily participates in
an RBRC® industry program to
Uniden America Corporation DOES NOT
represent this unit to be waterproof. To reduce the
risk of fire, electrical shock, or damage to the unit,
DO NOT expose this unit to rain or moisture.
collect and recycle nickel-cadmium batteries at
the end of their useful life, when taken out of
service within the United States.
• The RBRC® program provides a convenient
alternative to placing used nickel-cadmium
batteries into the trash or municipal waste
stream, which is illegal in some areas.
• Through the RBRC® program, Uniden makes it
easy for you to drop off the used battery at local
retailers of replacement nickel-cadmium
batteries. You may also contact your local
recycling center for information on where to
return the used battery.
Please call 1-800-8-BATTERY for information on
Ni-Cd battery recycling in your area. Uniden's
involvement in this program is part of its
commitment to protecting our environment and
conserving natural resources.
Rechargeable Nickel-Cadmium Battery
Warning
• This equipment contains a rechargeable nickel-
cadmium battery.
• Cadmium is a chemical known to the State of
California to cause cancer.
• The rechargeable nickel-cadmium battery
contained in this equipment may explode if
disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable nickel-cadmium
battery used in this equipment in any charger
other than the one designed to charge this
battery as specified in the owner's manual.
Using another charger may damage the battery
or cause the battery to explode.
• RBRC® is a registered trademark of the
Rechargeable Battery Recycling Corporation.
w w w. u n i d e n . c o m
PRECAUTIONS [62]
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric shock
from lightning.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
3. Do not use the telephone to report a gas leak
in the vicinity of the leak.
accompanying the appliance.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode. Check
with local authorities for possible battery
disposal instructions.
Uniden works to reduce lead content in our PVC
coated cords in our products and accessories.
Warning!
The cords on this product and/or accessories
contain lead, a chemical known to the State of
California to cause birth defects or other
reproductive harm. Wash hands after handling.
5. Do not disassemble any component of this
product.
SAVE THESE INSTRUCTIONS
Important Safety Instructions
When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to
persons, including the following:
CAUTION!
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries
according to the instructions. Do not open or
mutilate the battery, and disconnect the battery
before shipping this product.
1. Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen
sink or laundry tub, in a wet basement or near
a swimming pool.
[63] PRECAUTIONS
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to
a line, as determined by the total RENs, contact
the telephone provider. For products approved
after July 23, 2001, the REN for this product is part
of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 03 is
a REN of 0.3). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But if advance notice isn't
practical, the telephone company will notify the
customer as soon as possible. Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary. The telephone
company may make changes in its facilities,
equipment, operations or procedures that could
affect the operation of the equipment. If this
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that
contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX. If
requested, this number must be provided to the
telephone company.
An applicable Universal Service Order Codes
(USOC) certification for the jacks used in this
equipment is provided (i.e., RJ11C) in the
packaging with each piece of approved terminal
equipment. A plug and jack used to connect this
equipment to the premises wiring and telephone
network must comply with the applicable FCC Part
68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is
provided with this product. It is designed to be
connected to a compatible modular jack that is
also compliant. See installation instructions for
details.
The REN is used to determine the number of
devices that may be connected to a telephone
w w w. u n i d e n . c o m
PRECAUTIONS [64]
Download from Www.Somanuals.com. All Manuals Search And Download.
happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
Please follow instructions for repairing, if any (e.g.
battery replacement section); otherwise do not
substitute or repair any parts of the device except
as specified in this manual. Connection to party
line service is subject to state tariffs. Contact the
state public utility commission, public service
commission or corporation commission for
information. This equipment is hearing aid
compatible.
telephone equipment connected to AC power
sources. To minimize damage from these types of
surges, a surge arrestor is recommended.
Changes or modifications to this product not
expressly approved by Uniden, or operation of this
product in any way other than as detailed by the
owner's manual, could void your authority to
operate this product.
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation. Privacy of
communications may not be ensured when using
this phone.
Should you experience trouble with this
equipment, please contact Uniden customer
service at 800-297-1023. If the equipment is
causing harm to the telephone network, the
telephone company may request that you
disconnect the equipment until the problem is
resolved.
To insure the safety of users, the FCC has
established criteria for the amount of radio
frequency energy various products may produce
depending on their intended usage. This product
has been tested and found to comply with the
FCC's exposure criteria. For body worn operation,
NOTICE: According to telephone company
reports, AC electrical surges, typically resulting
from lightning strikes, are very destructive to
[65] PRECAUTIONS
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
the FCC RF exposure guidelines were also met
when used with the Uniden accessories supplied
or designed for this product. Use of other
telephone or other source of interference. If you
cannot eliminate this type of interference, you
need to change to a different channel.
accessories may not ensure compliance with FCC
RF exposure guidelines and should be avoided.
Finally, it should be noted that some cordless
telephones operate at frequencies that may cause
interference to nearby TVs and VCRs. To minimize
or prevent such interference, the base of the
cordless telephone should not be placed near or
on top of a TV or VCR. If interference is
experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce
or eliminate the interference.
Radio Interference
Radio interference may occasionally cause
buzzing and humming in your cordless handset, or
clicking noises in the base. This interference is
caused by external sources such as TV,
refrigerator, vacuum cleaner, fluorescent lighting,
or electrical storm. Your unit is NOT DEFECTIVE.
If these noises continue and are too distracting,
please check around your home to see what
appliances may be causing the problem. In
addition, we recommend that the base not be
plugged into a circuit that also powers a major
appliance because of the potential for
interference. Be certain that the antenna on the
unit is fully extended when needed. In the unlikely
event that you consistently hear other voices or
distracting transmissions on your phone, you may
be receiving radio signals from another cordless
Cordless Telephone Privacy
Cordless telephones are radio devices.
Communications between the handset and base
of your cordless telephone are accomplished by
means of radio waves which are broadcast over
the open airways. Because of the inherent
physical properties of radio waves, your
communications can be received by radio
receiving devices other than your own cordless
telephone unit. Consequently, any
communications using your cordless telephone
may not be private.
w w w. u n i d e n . c o m
PRECAUTIONS [66]
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Equipment
I.C. Notice
The term "IC:" before the radio certification
number only signifies that Industry Canada
technical specifications were met. Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device. "Privacy of communications may not
be ensured when using this telephone".
Terminal Equipment
NOTICE:This equipment meets the applicable
Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the
registration number. The abbreviation, IC, before
the registration number signifies that registration
was performed based on a Declaration of
Conformity indicating that Industry Canada
technical specifications were met. It does not
imply that Industry Canada approved the
equipment.
NOTICE:The Ringer Equivalence Number (REN)
for this terminal equipment is marked on the
equipment itself. The REN assigned to each
terminal equipment provides an indication of the
maximum number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist of any
combination of devices subject only to the
requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not
exceed five.
[67] PRECAUTIONS
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
One Year Limited Warranty
Important: Evidence of original purchase is
required for warranty service. WARRANTOR:
UNIDEN AMERICA CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for
one year, to the original retail owner, this Uniden
Product to be free from defects in materials and
craftsmanship with only the limitations or
anyone other than as detailed by the owner's
manual for this product.
STATEMENT OF REMEDY: In the event that the
product does not conform to this warranty at any
time while this warranty is in effect, warrantor will
either, at its option, repair or replace the defective
unit and return it to you without charge for parts,
service, or any other cost (except shipping and
handling) incurred by warrantor or its
exclusions set out below.
WARRANTY DURATION: This warranty to the
original user shall terminate and be of no further
effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or
necessary, (B) modified, altered, or used as part of
any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone
other than an authorized Uniden service center for
a defect or malfunction covered by this warranty,
(E) used in any conjunction with equipment or
parts or as part of any system not manufactured
by Uniden, or (F) installed or programmed by
representatives in connection with the
performance of this warranty. Warrantor, at its
option, may replace the unit with a new or
refurbished unit. THE LIMITED WARRANTY SET
FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT
AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED
OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
w w w. u n i d e n . c o m
ONE YEAR LIMITED WARRANTY [68]
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR
return it. The Product should be shipped freight
prepaid, by traceable means, to warrantor at:
Uniden America Service
CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental
or consequential damages so the above limitation
or exclusion may not apply to you.
4700 Amon Carter Blvd.
Fort Worth, TX 76155
As an Energy Star® Partner, Uniden
has determined that this product or
product models meets the Energy
Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered
mark.
LEGAL REMEDIES: This warranty gives you
specific legal rights, and you may also have other
rights which vary from state to state. This warranty
is void outside the United States of America and
Canada. PROCEDURE FOR OBTAINING
PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual
you are certain that the Product is defective, pack
the Product carefully (preferably in its original
packaging). Disconnect the battery from the
Product and separately secure the battery in its
own separate packaging within the shipping
carton. The Product should include all parts and
accessories originally packaged with the Product.
Include evidence of original purchase and a note
describing the defect that has caused you to
[69] ONE YEAR LIMITED WARRANTY
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
[71]
w w w. u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
C
U
U
T
T
C
C
U
U
T
T
REMOTE OPERATION CARD
MEMORY LOCATION MEMO
Name Phone Number
Memory
Location
Remote access away from home Turn on the answering system remotely
1. Call your phone number from
a touch-tone phone.
2. During the outgoing message, 2. Press [0] and enter your PIN
press [0] and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts. The
phone stands by for you to
enter a command.
1. Call your phone and let it ring
10 times until it answers.
1*
2
code.
3. Press [0] then [5] to stop
the announcement.
4. Press [0] then [6] to turn the
answering system on.
3
4
5
3. To quit, hang up the phone.
C
C
U
U
T
T
C
C
U
U
T
T
MEMORY LOCATION MEMO
Name Phone Number
REMOTE OPERATION CARD
Memory
Location
Remote access away from home Turn on the answering system remotely
1. Call your phone number from
a touch-tone phone.
2. During the outgoing message, 2. Press [0] and enter your PIN
press [0] and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts. The
phone stands by for you to
enter a command.
1. Call your phone and let it ring
10 times until it answers.
1*
2
code.
3. Press [0] then [5] to stop
the announcement.
4. Press [0] then [6] to turn the
answering system on.
3
4
5
3. To quit, hang up the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
C
U
U
T
T
C
C
U
U
T
T
MEMORY LOCATION MEMO
Phone Number
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answering System Off
Voice Prompts
Key
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
Memory
Location
Name
6
7
8
9
10
C
C
U
U
T
T
C
C
U
U
T
T
MEMORY LOCATION MEMO
Name Phone Number
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answering System Off
Voice Prompts
Key
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
Memory
Location
6
7
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
Our customer care specialists are here to help you! Visit our web-site at
Having trouble?
during regular business hours.*
To order headsets, accessory handsets, replacement batteries, or other
during regular business hours.*
Need a part?
If you need special assistance due to a disability or have questions on the
accessibility features of this product, please call 1-800-874-9314 (voice or
TTY).
Help for our customers
with special needs
May be covered under one or more of the following U.S. patents:
4,797,916 5,426,690 5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790 5,660,269 5,663,981 5,671,248
5,717,312 5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619 5,893,034
5,912,968 5,915,227 5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082 6,0760,52 6,125,277 6,253,088
6,314,278 6,321,068 6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920 6,788,953 6,839,550 6,889,184
6,901,271 6,907,094 6,914,940 6,940,867 6,953,118 7,023,176 7,030,819 7,146,160 7,203,307 7,206,403
Other patents pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
|