4. Use the number keys to enter the telephone number (up to 32 digits) and press
the STORE button to save. (The unit will not dial a phone number in this mode.)
The cursor automatically moves to the text line for name entry.
NOTE: A pause is 3 seconds in length and you can store more than one, if a
longer pause is needed.
Connecting the Handset
1. Connect one end of the coiled
handset cord to the jack on
the handset.
Display Language
Hearing Aid Compatibility (HAC)
Caller ID (CID) Features
This adjustment allows you to display the Caller ID prompts in English, French, or
Spanish.
This telephone system meets FCC/Industry Canada standards for Hearing Aid
Compatibility.
IMPORTANT: In order to use all of the features of this telephone, you must
subscribe to two separate services available from your local telephone
company: the standard Name/Number Caller ID Service to know who is
calling when the phone rings and Call Waiting Caller ID Service to know
who is calling while you are on the phone.
Pre-Dialing
5. Use the number keys to enter the name of the person associated with the
telephone number you just entered. More than one letter is stored in each of the
number keys.
1. Press the MENU button until ENG FRA ESP appears in the display.
2. Use the LEFT or RIGHT button to select ENG, FRA, or ESP.
3. Press the MENU button again to save.
1. With the handset on the cradle, enter the telephone number you wish to call. The
telephone number shows in the display.
Licensing
2. Plug the other end of the
coiled handset cord to the jack
on the base.
Licensed under US Patent 6,427,009.
2. Lift the handset or press the SPEAKER button and the number automatically dials.
For example, to enter the name BILL SMITH, press the 2 key twice for the letter B.
Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L.
CAUTION:
NOTE: Use the DELETE button to delete an incorrectly entered number.
CID Summary Screen
Contrast
RISKOFELECTRICSHOCK
DONOTOPEN
3. Place the handset in the
cradle.
The Summary Screen shows the current time, date, and number of new calls to
review. It is displayed until any button is pressed.
This adjustment allows you to adjust the contrast of the display.
WARNING:TO
Troubleshooting Tips
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
THE LIGHTNING
CAUTION: TO REDUCE THE
NOTE: The flashing cursor automatically moves to the next position or
you may press the LEFT or RIGHT button to move the cursor to the next
position.
Press the 5 key 3 times for the second letter L. Press the arrow key (5) two times to
insert a space, and press the 7 key 4 times for the letter S. Press the 6 key once for
the letter M. Press the 4 key 3 times for the letter I. Press the 8 key for the letter T.
Press the 4 key twice for the letter H.
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO
HEAD WITHIN THE NOT REMOVE COVER (OR
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
1. Press the MENU button until CONTRAST shows in the display.
2. Use the LEFT or RIGHT button to select level 1, 2, 3, 4, or 5.
3. Press MENU button again to save.
No Dial Tone
Model CEZ260
Connecting the
WARNING SIGN
ALERTING YOU OF
IMPORTANT
TRIANGLE IS A
WARNING SIGN
BACK). NO USER
NOTE: The number of new calls is displayed until all new calls have been
reviewed.
SERVICEABLE PARTS INSIDE.
•
•
Check all cabling to make sure that all connections are secure and not damaged.
Check hook switch: Does it fully extend when handset is lifted from cradle?
ALERTING YOU OF REFER SERVICING TO
Telephone Line
1. Connect one end of the
straight telephone line cord
to the jack on the back of the
base.
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
QUALIFIED SERVICE
PERSONNEL.
Speakerphone with 13
Number Memory User’s
Guide
PRODUCT TO RAIN
OR MOISTURE.
Receiving and Storing CID Calls
Local Area Code
SEE MARKING ON BOTTOM / BACK OF PRODUCT
No Information is Shown After the Phone Rings
This unit receives and displays information transmitted by your local phone company.
This information can include the phone number, date, and time; or the name, phone
number, date, and time. The unit can store up to 75 calls for later review. When the
memory is full, a new call automatically replaces the oldest call in memory. NEW
appears in the display for calls received that have not been reviewed.
The telephone uses the programmed area codes to determine the number format to
display when a valid Caller ID signal is received. Numbers that match the local area
code are displayed as seven digits and are used for dialing back previous numbers.
Entering your local area code will also help you immediately know if the call is local or
long distance when viewing the CID records in the display.
Introduction
•
•
Are you subscribed to Caller ID service from your local telephone company?
Be sure to wait until the second ring before answering.
6. Press the STORE button to save the name.
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to the
IMPORTANT SAFETY INSTRUCTIONS provided with this product and
save them for future reference.
2. Connect the other end to a
wall phone jack.
Phone Dials in Pulse with Tone Service
Make sure T/P MODE is set to TONE DIAL.
Phone Won’t Dial Out with Pulse Service
Make sure T/P MODE is set to PULSE DIAL.
Phone Does Not Ring
7. To enter another name and number in a different memory location, return to step
1 and repeat the process.
•
3. Set the RINGER volume switch located at the back of the base to the desired
loudness.
Reviewing CID Records
NOTE: If you make a mistake and want to start over, press the DELETE
button to delete all of the digits.
1. Press the MENU button until LOCAL AREA CODE shows in the display.
2. Use the number pad to enter the area code.
Changing a Stored Number
•
•
Press the LEFT or RIGHT button to view the call records.
Short Glossary of Terminology Used in this Manual
Hook switch. The part of the phone that pops up to activate the phone line when the
handset is lifted from the base.
OFF - Telephone will not ring.
LO - Sound will be lowest.
HI - Sound will be loudest.
Repeat the storage sequence under Storing A Name and Number in Memory, and use
the DELETE button to delete the old number before entering the new number.
•
Press the RIGHT button to scroll through the call records from the oldest to the
newest.
Erasing a Stored Name & Number
•
•
Make sure ringer switch is ON.
•
•
Press the LEFT button to scroll through the call records from the most recent to the
oldest.
Off-hook. A term used to describe the phone in its active mode when the handset is
off of the base cradle or when the SPEAKER button is pressed.
NOTE: The unit is properly installed if you pick up the handset and hear the
dial tone. Otherwise, recheck all installation steps.
1. Press the STORE button.
NOTE: If you need to edit your entry, use the LEFT or RIGHT button to move
left or right and re-enter the number.
3. Press the MENU button to save.
You may have too many extension phones on your line. Try unplugging some
extension phones.
2. Press the memory location (0 to 9, or quick call buttons; A, B, or C) to be erased.
3. Press the DELETE button.
When all of the records have been viewed, START/END appears in the display.
On-hook. A term used to describe the phone in an inactive mode.
Wall Mounting
•
Check for dial tone. See Troubleshooting Tips for No Dial Tone.
Deleting CID Records
Your speakerphone can also be mounted on a wall plate (not included).
Before You Begin
Incoming Voice Volume Low
Copying Caller ID Memories to
Dialing Mode
•
•
To delete the record shown in the display, press the DELETE button once.
REMINDER: To prevent the handset from falling out of the cradle while the
phone is hanging on the wall, you must switch both the handset hook and
the desk stand to their wall-mount positions.
• On the front of the base, pull the handset hook out of
the slot. Rotate the hook 180 degrees and flip it from
front to back. Slide it back into the slot.
Parts Checklist
This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.
User Memory
•
Are other phones off hook at same time? If so, this is normal condition as volume
drops when additional phones are used at once.
To delete all records while reviewing, press and hold the DELETE button for
about three seconds. DELETE ALL? appears in the display. Press DELETE again to
complete.
Make sure your package includes the following items:
1. Press the LEFT or RIGHT button to view the caller number and name you want to
copy.
1. Press the MENU button until 4 TONE PULSE shows in the display
•
Check the handset receiver or speaker volume.
2. Press either LEFT or RIGHT button to select the dialing mode. The default is Tone
dialing.
2. Press the STORE button.
Memory Dialing
Make sure you entered the numbers correctly into memory.
Dialing Back
3. Press the memory location (0-9, or quick call buttons; A, B, or C). The number
flashes if there is a number already stored in the memory location.
3. Press the MENU button again to save.
When reviewing Caller ID records, you can dialback the numbers on the display by
pressing the DIAL button.
•
• .Turn the base over. Press in on the
tabs and remove the desk stand
from the back of the base.
NOTE: The phone will exit Set Up after 20 seconds if no buttons are pressed.
General Product Care
4. Press the STORE button to enter the edit mode, and then press the STORE button
again to edit the name.
NOTE: If PICKUP PHONE shows in the display, no other changes to the
number can be made. The information sent from the telephone company
is known to be a valid number for dialing back (used only in very limited
areas). Once you pickup the phone, the number is automatically dialed.
REMINDER: The time and date are programmed automatically when the
first Caller ID record is successfully received after set up.
To keep your phone working and looking good, follow these guidelines:
Base
Handset
Handset
cord
Desk stand
(might be
attached to
base)
2-wire
telephone
line cord
•
Avoid putting it near heating appliances and devices that generate electrical noise
(for example, motors or fluorescent lamps).
NOTE: You may select a different memory location by pressing 5 or 6 to
scroll through the memories or press 0 - 9, or quick call buttons; A, B, or C.
5. Press the STORE button to confirm and save, and wait for three seconds to exit.
• Rotate the stand 180 degrees,
and insert the hooks marked
WALL into the notches marked
WALL. Press in on the tabs and
snap the stand into place.
Telephone Basics
You can use the telephone by speaking into and listening through the handset, or by
using the speakerphone.
•
•
•
•
DO NOT expose to direct sunlight or moisture.
Avoid dropping and other rough treatment to the unit.
Clean with a soft cloth.
If You Programmed Your Local Area Code
Telephone Jack Requirements
1. Use either LEFT or RIGHT button to display the number you want to dial.
To use this phone, you need an RJ11C type modular telephone
jack, which might look like the one pictured here, installed in
your home. If you don’t have a modular jack, call your local
phone company to find out how to get one installed.
NOTE: If the name you want to enter is longer than 12 characters, only the
first 12 characters will be copied into memory.
Wall plate
Receiving a Phone Call
2. Press the DIAL button.
Important Information
Modular
telephone
line jack
• Connect the telephone line cord
to the wall jack and the phone.
If desired, wrap any excess cord
around the cord hooks as shown.
1. Lift the handset or press SPEAKER to answer the call.
•
If you see a number with seven digits (i.e. 555-1234), then the call is from within
your area code. However, this does not guarantee the call is a local call.
Never use a strong cleaning agent or abrasive powder because this will damage
the finish.
Storing a Redial Number to Memory
NOTICE: This product meets the applicable Industry Canada technical specifications.
2. Replace the handset in the cradle or press the SPEAKER button to hang up.
1. Press the STORE button.
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
•
If you see a number with 11 digits (i.e. 1-234-555-1234), then the call is not from
within your area code.
•
Retain the original packaging in case you need to ship it at a later date.
Important Installation Information
2. Press any key (0-9, or quick call buttons A, B, or C) for the memory location. If there
is a number already stored in the memory location it will appear on the display.
Use the review (5 or 6) button to select a different location.
Making a Phone Call
1. Lift the handset or press the SPEAKER button. Wait for a dial tone.
• Place the mounting slots over
the pins on the wall plate, and
slide the base down to lock it into place.
CAUTION: Disconnect the phone cord from the wall outlet before
installing or replacing the batteries.
One-year Limited Warranty
NOTE: A timer (10 seconds on-hook and 3 seconds off-hook) located in the
upper right side of the display will start, letting you know how much time
is left until the unit returns to the Summary Screen.
3. If you are at on-hook and PICKUP OR ADJ displays, you can adjust the phone
number format by pressing the DIAL button. If the phone is off-hook and ADJUST
shows in the display, you can adjust the phone number format by pressing the
DIAL button. For example, sometimes a 7-digit local number cannot be dialed
because it requires a 10-digit or 11-digit format. Press the DIAL button repeatedly
to scroll through the 7, 10, and 11-digit numbers.
2. Dial the telephone number you want to call.
The equipment must be installed using an acceptable method of connection. The
customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Important: Evidence of original purchase is required for
warranty service.
3. Press the STORE button again to confirm.
•
•
Never install telephone wiring during a lightning storm.
3. Replace the handset in the cradle, or press the SPEAKER button to hang up.
4. Press the REDIAL/pause button, and then press the STORE button again.
5. Enter name, if necessary, and then press the STORE button to confirm.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
Never touch uninsulated telephone wires or terminals, unless the telephone line
has been disconnected at the network interface.
Volume
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials & craftsmanship with only the
limitations or exclusions set out below.
You may adjust the handset and speakerphone volume independently with the
VOLUME button or the LEFT or RIGHT buttons. Both handset receiver volume level and
speakerphone volume levels are saved in memory.
•
•
Use caution when installing or modifying telephone lines.
Copying a Redial Number to Memory
1. Press the REDIAL/pause while on-hook. Redial number will display along with
PICKUP PHONE.
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations. It should add:
WARRANTY DURATION: This warranty to the original user shall terminate & be of no
further effect 12 months after the date of original retail sale. The warranty is invalid if
the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any configurations
not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other
than an authorized Uniden service center for a defect or malfunction covered by this
warranty, (E) used in any conjunction with equipment or parts or as part of any system not
manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed
by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty
at any time while this warranty is in effect, warrantor will either, at its option, repair
or replace the defective unit & return it to you without charge for parts, service, or any
other cost (except shipping & handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its option, may replace
the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED
OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or
limitation of incidental or consequential damages so the above limitation or exclusion
may not apply to you.
Adjusting the Handset Receiver Volume
Users should ensure for their own protection that the electrical ground connections of
the power utility, telephone lines and internal metallic water pipe systems, if present,
are connected together. This precaution may be particularly important in rural areas.
2. Press the STORE button.
While using the handset, you can adjust the speaker volume by pressing the VOLUME
button continuously or pressing the LEFT or RIGHT buttons after pressing the VOLUME
button. REC (Handset Receiver) volume shows in the display.
Installing and Replacing the Batteries
Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and storing Caller
ID records and for storing the numbers you use for memory dialing, pulse dialing, and
redial.
3. Press any key (0-9, or quick call buttons A, B, or C) for the memory location. If there
is a number already stored in the memory location it will appear on the display.
Use the review (5 or 6) button to select a different location.
7 digits: 7-digit telephone number (i.e. 555-5555)
CAUTION: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate.
10 digits: 3-digit area code + 7-digit telephone number (i.e. 425-555-5555)
Adjusting the Speakerphone Volume
11 digits: long distance code 1 + 3-digit area code + 7-digit telephone
number (i.e. 1-425-555-5555)
4. Press the STORE twice.
While using the speakerphone, you can adjust the speaker volume by pressing the
VOLUME button continuously or pressing the LEFT or RIGHT buttons after pressing the
VOLUME button. SPK volume level shows in the display.
IMPORTANT: You will have approximately 90 seconds to replace the
batteries before the memories stored are lost. Please read the instructions
before replacing the batteries and have the batteries ready to be inserted
beforehand.
NOTES: This equipment may not be used on coin service provided by the telephone
company.
5. Enter name, if necessary, and then press the STORE button again to confirm and
save.
4. To dial the displayed number, and the phone is on-hook, pick up the handset or
press the SPEAKER button before the timer reaches 0. If the phone is off-hook,
wait until the time reaches 0. NOW DIALING shows in the display and the number
is dialed.
Interference Information
Redial
Dialing a Number Stored in Memory While On-hook
IMPORTANT: If you are not going to use the telephone for more than 30
days, remove the batteries because they may leak and damage the unit.
1. Disconnect the telephone line cord. If necessary, remove the desk stand from the
back of the base.
This equipment generates and uses radio frequency energy which may interfere
with residential radio and television reception if not properly installed and used
in accordance with instructions contained in this manual. Reasonable protection
against such interference is ensured, although there is no guarantee this will not
occur in a given installation. If interference is suspected and verified by switching
this equipment on and off, the user is encouraged to try to correct the interference
by one or more of the following measures: Reorient the radio/television receiver’s
antenna, relocate the equipment with respect to the receiver, plug the equipment
and receiver into separate circuit outlets. The user may also wish to consult a qualified
radio/television technician for additional suggestions. This equipment has been fully
tested and complies with all limits for Class B computing devices pursuant to part 15
FCC Rules and Regulations.
You may redial the last number you called by pressing the REDIAL/pause button after
you hear a dial tone.
Base Layout
1. Press the DIAL button
2. To select a memory, press any key (0-9, or quick call buttons; A, B, or C.). The
number in that memory location displays.
If You Did Not Program Your Local Area Code
1. Use the LEFT or RIGHT button to display the number you want to dial. You will only
see 10-digit numbers (i.e. 234- 555-1234).
NOTE: The redial feature holds the last number (up to 32 digits) that you
dialed in memory. If you pressed any other numbers after dialing the
phone number (for example, when accessing a voice-menu system) then
those numbers are also dialed.
STORE
(button)
MENU
(button)
Display DELETE
(button)
NOTE: You may select a different memory location by pressing LEFT or
RIGHT to scroll through the memories or pressing key (0 - 9,or quick call
buttons; A, B, or C.).
VOLUME
(button)
LEFT, RIGHT
(buttons)
2. Release the latch on the battery
compartment and remove the cover.
2. See steps 2 through 4 in the previous section to complete the dialback process.
If you get a busy signal, press REDIAL/pause again without hanging up.
3. Insert 4 AA-size alkaline batteries as
shown on the diagram in the battery
compartment.
Caller ID Display Messages
3. Press the SPEAKER button, or pick up the handset to dial the displayed number.
Mute
The following messages shows the status of the phone or provides Caller ID
information:
Dialing a Number Stored in Memory While Off-hook
Use the MUTE button to interrupt a phone conversation to talk privately with
someone else in the room. A conversation can be muted while using the
speakerphone or handset.
1. Lift the handset, or press the SPEAKER button.
4. Snap the battery compartment door back
into place and replace the desk stand.
BLOCKED CALL The caller of the incoming call is registered as “Private Number”and
their Caller ID information is withheld.
CALL WAITING Indicates a call is waiting on the line.
A, B, C
(quick call
buttons)
MUTE
(button)
2. Press the DIAL button then press a memory location button.
- OR -
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other
rights which vary from state to state. This warranty is void outside the United States of
America & Canada.
6. Connect the line cord and check your
memory locations.
1. Press the MUTE button. The mute indicator lights up.
2. Press MUTE again to turn it off.
Telephone Network Information
1. Lift the handset, or press the SPEAKER button.
INCOMPLETE Caller information has been interrupted during transmission or the
Should your equipment cause trouble on your line which may harm the telephone
network, the telephone company, where practicable, may notify you that temporary
discontinuance of service may be required. Where prior notice is not practicable and
the circumstances warrant such action, the telephone company may temporarily
discontinue service immediately.
NOTE: If the low battery icon appears
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the
instructions in the owner’s manual you are certain that the Product is defective, pack
the Product carefully (preferably in its original packaging). Disconnect the battery from
the Product & separately secure the battery in its own separate packaging within the
shipping carton. The Product should include all parts & accessories originally packaged
with the Product. Include evidence of original purchase & a note describing the defect that
has caused you to return it. The Product should be shipped freight prepaid, by traceable
means, to warrantor at:
2. Press the DIAL button, then use the review (5 or 6) button to scroll through the
stored memory locations to find the desired number.
DATA
NO CALLS
NO DATA
phone line is excessively noisy.
The caller memory is empty.
No Caller ID information was received.
Flash
in the display, you need to replace the batteries. It is important that you
replace the batteries as soon as possible in order to maintain Caller ID
operation.
Press FLASH/exit to activate special features of your telephone network, such as call
transfer, or special services from your local telephone company, such as call waiting.
3. Press the DIAL button again to dial the stored number.
SPEAKER
(button)
START/END You are at the beginning or the end of the Caller ID memory log.
UNKNOWN The incoming call does not have Caller ID service or their service
Cascade Dialing
Temporary Tone Dialing
Installing the Phone
The telephone company may make changes in its communications facilities,
equipment, operations or procedures where such action is required in the operation
of its business. If these changes are expected to affect the use or performance of your
telephone equipment, the telephone company will likely give you adequate notice to
allow you to maintain uninterrupted service.
This process allows you to dial a succession of stored numbers from separate memory
locations. This is useful when you must dial several sequences of numbers, such as
with frequent calls via a telephone company long distance provider.
If you have pulse (rotary) service and want to access customer calling services (such
as telebanking and long distance services) that require tone dialing, you can use this
feature to temporarily change from pulse to tone service.
DIAL
(button)
CALLER
area is not linked to yours. If UNKNOWN CALLER appears along with
a calling number, the name information for that number was not
available.
Your phone should be placed on a level surface, such as a desk or table top, or you can
mount it on a wall.
FLASH/exit
(button)
REDIAL/pause
(button)
/TONE
*
Location
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(button)
After dialing the telephone number and connecting to the customer calling service,
1. Press and release the *TONE button.
For example
Memory location
Your phone features a speakerphone for ease of use and convenience during a
phone conversation. At any time during a conversation, you can lift the handset to
stop using the speakerphone. Likewise, when you are using the handset, press the
SPEAKER button and place the handset in the cradle to switch to the speakerphone.
Local access number of long distance company
Authorization code (ID)
6
7
8
Notice must be given to the telephone company upon termination of your telephone
from your line.
Memory
2. When you hang up, the telephone automatically returns to pulse dialing mode.
Setting Up the Caller ID Menu
You may store information in any of the following memory locations: 0 to 9, or quick
call buttons; A, B, or C. See “Storing a Pause in Memory”and “Temporary Tone Dialing”
for more information.
Uniden® is a registered trademark of Uniden America Corporation.
The pictures in this manual are used for examples only. Your actual phone may not look
exactly like the pictures.
TIP: Temporary Tone can also be used while storing numbers in memory by
pressing *TONE at the necessary point in the storage sequence.
REN Number
Long distance phone number
1. Pick up the handset or press SPEAKER.
You should not plug the telephone into the modular jack while setting up the Caller
ID menu.
For best speakerphone performance, avoid the following:
On the bottom of this equipment is a label indicating, among other information, the
Ringer Equivalence Number (REN) for the equipment.
•
Areas with high background noise. (The microphone might pick up these sounds
and prevent the speakerphone from going into the receiving mode when you
finish talking.)
Speakerphone Use
NOTE: This model retains all user memory even if the batteries are removed
and/or telephone line has been interrupted or disconnected.
1. Press the MENU button, to access the menu feature configuration mode.
# 1. >ENG FRA ESP (CID language default English)
# 2. CONTRAST (default level is 3).
2. Press DIAL button, then press number “6”for the memory location.
3. Press DIAL button, then press number “7”for the memory location.
4. Press DIAL button, then press number “8”for the memory location.
5. The number dials automatically.
Note the following guidelines when using the speakerphone:
The REN is useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your telephone number
is called. In most (but not all) areas, the sum of the RENs of all devices connected to
one line should not exceed 5. To be certain of the number of devices you may connect
to your line as determined by the REN, you should contact your local telephone
company.
•
•
•
•
The speakerphone works similar to a two-way radio in that you can only listen or
talk at one time.
Storing a Name and Number in Memory
•
•
Surfaces affected by vibration.
1. Press the STORE button. LOCATION? shows in the display.
# 3. LOCAL AREA CODE
Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which
can generate an echo effect.
Stay reasonably close to the phone so that you can be clearly heard by the person
to whom you are talking.
2. Press the desired memory location (0 to 9, or quick call buttons; A, B, or C.)
# 4. TONE/PULSE (Default is tone dialing).
Storing a Pause in Memory
NOTE: You may select memory locations by pressing 5 or 6 to scroll through
the memory locations or press the 0 - 9, or quick call buttons; A, B, or C.
3. Press the STORE button again to confirm the memory location.
Attaching the Desk Stand
Turn the phone over . Insert the hooks marked DESK into the notches marked DESK.
Press in on the tabs and snap the stand into place.
2. Press the MENU button to scroll through the 4 menu screens.
3. Use the LEFT or RIGHT button to select the desired setting.
The REDIAL/pause button has dual functionality and becomes a pause button when
pressed in sequence after the STORE button. It is valid only when storing a number
into memory locations. Use the REDIAL/pause button to insert a pause when a delay
is needed in an automatic dialing sequence. For example, when you must dial a 9 to
get an outside line or when you enter codes to access your long distance company.
You can adjust the speaker volume by pressing the volume button continuously or
pressing the review button 5 or 6 after pressing the volume button.
REN Number is located on the cabinet bottom.
The speakerphone indicator light comes on when the speakerphone is in use.
NOTE: You have 20 seconds following an entry before the phone returns to
the Summary Screen.
NOTE: If necessary, to erase existing memories, or if you make a mistake,
use the DELETE button.
© 2009 Uniden America Corporation, Fort Worth, Texas
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|