Uniden Cell Phone DCT 748 User Manual

DCT 748

SERIES

OWNER'S

MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

WELCOME/FEATURES

TERMINOLOGY

CONTROLS & FUNCTIONS

DISPLAY AND ICONS

CALLER ID

Caller ID and CIDCW (Caller ID on Call Waiting)

THE INTEGRATED TELEPHONE

ANSWERING DEVICE

The Integrated Telephone Answering Device

Turning t h e An sw erin g S yst em On/Of f

Setting Your Outgoing Message (Greeting)

Using Your Answering System

GETTING STARTED

Setting up the Phone

Expanding Your Phone

Remote Operation

Changing the Digital Security Code

Installing the Beltclip

MULTI-HANDSET FEATURES

Multi-Handset Features

Using DirectLink Mode

Intercom

Optional Headset Installation

Main Menu Options

Setting Menu Options

Room/Baby Monitor

BASICS

ADDITIONAL INFORMATION

Using Your Phone

Call Waiting

Note on Power Sources

General Information

Placing a Call on Hold

Redialing a Call

TROUBLESHOOTING

Troubleshooting

Adjusting the Ringer, Earpiece and Speaker Volume

Mute Microphone

Liquid Damage

Tone Dialing Switch-over

Traveling Out of Range

Clarity Booster

PRECAUTIONS & WARRANTY

I.C. NOTICE

INDEX

MEMORY LIST

REMOTE OPERATION CARD

Privacy Mode

Conferencing

Find Handset

PHONEBOOK

Setting up the Phonebook

Viewing the Phonebook

Making Calls Using the Phonebook

Speed Dialing

Editing or Erasing a Stored Name, Phone Number, Distinctive

Ring and Speed Dial

Copying Phonebook Locations

w w w . u n i d e n . c o m

[ 1 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Congratulations on your purchase of the Uniden Multi-Handset Cordless Telephone

System! This unit is different from conventional cordless telephones. When the base

unit is connected to AC power and a telephone line, it can support up to four handsets.

You can now place a fully-featured cordless handset anywhere in your home or office

where AC power is available to connect the handset chargers. Extra handsets also allow

you to establish a three-way conference call among two handsets and an outside line.

Welcome

Features

Note: Illustrations in this manual are used for explanation purposes. Some

illustrations in this manual may differ from the actual unit.



As an Energy Star Partner, Uniden has determined that this product or product models



meets the Energy Star guidelines for energy efficiency.



Energy Star is a U.S. registered mark.

• Backward / Forward Compabibility

• 2.4GHz Frequency Hopping Spread Spectrum

• Integrated Answering Device

• 4 Multi-Handset Expandability (DCX700 handset sold separately)

• Handsfree Speakerphone

• Caller ID/Call Waiting Deluxe (subscribe through local telephone company)

• 100 Dynamic Memory Locations (Phonebook & Caller ID)

• Trilingual Display Options and Voice Prompts (English, French and Spanish)

• Intercom/Call Transfer Between Handsets

• Distinctive Ring Options

• 20 ring types - (10 ring tones and 10 melody rings)

• Hold or Mute Call

• Audio/Clarity Boost

• True Banner

• DirectLink Mode

• Room/Baby Monitoring

• Battery Level Indicator

• Clock Display

w w w . u n i d e n . c o m

W E L C O M E / F E A T U R E S / T E R M I N O L O G Y [ 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

This series features AutoTalk and AutoStandby. AutoTalk allows you to answer a call by just removing

the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to

hang up by simply returning the handset to the cradle.

To protect you against mis-billed calls that might result from your phone being activated by other

equipment, this series has Random Code digital security, which automatically selects one of about

130,000 digital security codes for the handset and base.

Digital Spread Spectrum Technology uses a wider frequency band than standard digital transmissions. The

result is a more secure conversation with the clarity of digital sound, extended range, and minimal

interference from other cordless phones.

IntegriSound Built in sound quality which provides life-like conversations.

With DirectLink mode, you can use two or more handsets as radio transceivers (walkie-talkies).

Be sure to visit our web site: www.uniden.com



Uniden is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, DirectLink, IntegriSound and Random Code are trademarks of Uniden America.

Your phone may be compatible with other Uniden 2.4GHz Digital Expandable System.

Look for the technology icon on our boxes!

Terminology

•Standby Mode - The handset maybe sitting or off the cradle, but is NOT in use. talk/flash or

has not been

pressed. No dial tone is present.

•Talk Mode -

The handset is not in the cradle, and talk/flash or

has been pressed and enabling a dial tone.

w w w . u n i d e n . c o m

[ 3 ] W E L C O M E / F E A T U R E S / T E R M I N O L O G Y

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls & Functions

1.Handset Antenna

2.Headset Jack Cover

3.Beltclip Hole

4.Speakerphone Speaker and Ringer

5.Handset Battery Compartment

6.New Message LED

7.Handset Earpiece

8.LCD Display

9. (ring)/vol (volume) and ∧/∨ (P. 30 & 17)

a.ringer and volume control b. scroll keys for display screen

10.cid (caller ID) (P. 45)

11. /tone/

(P. 32 & 36)

12.pause/redial Key (P. 26 & 29)

13.

(speaker) (P. 27)

14.talk/flash (P. 26 & 28)

15.menu/clear (P. 17 & 36)

16.select/

(Handset Remote)/audio tone (P. 17, 58 & 31)

17.end (P. 27)

18.#/

(P. 36)

(phonebook)(P. 35)

19.

20.hold/transfer/int’com (intercom) (P. 28 & 64)

21.Handset Microphone

22.Handset Charging Contacts

Play

Skip

Repeat

Delete

Stop

w w w . u n i d e n . c o m

C O N T R O L S & F U N C T I O N S [ 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

35 36

(speaker)

23. Base Speaker

24. charge LED

32. volume/

(ring)/

(p.30)

25. in use LED

33. answer/on off LED (p.58)

34. Base Charging Contacts

35. TEL LINE Jack

26. Base antenna

27. New Message LED

28.

29. find hs /

30. (repeat)(p.55)

(play/stop) (p.54)

36. DC IN 9V Jack

(skip) (p.34 & 55)

31. ∅ (delete)(p.56)

[ 5 ] C O N T R O L S & F U N C T I O N S

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Display and Icons

Example of the standby mode display

ࠕ

ꢃ1((

ꢀꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#ꢀ

Ringer off icon (when the ringer is off) / Day of the week and time / battery icon

Handset ID and Banner

Number of new Caller ID calls received

ꢀꢀꢀꢀ*CPFUGVꢀꢅꢁ

ꢀꢀꢀ0GYꢀ%+&ꢃꢀꢀꢆ

ICON

STATUS

DESCRIPTION

Battery icons indicate the handset battery status. This icon cycles depending on

the battery status (full, medium, low, and empty).

Standby/Talk

Standby

Talk

Ringer off icon indicates that ringer is turned off.

ࠕ

ࠗ࠙

Mute icon appears when you mute the handset.

Talk

Speaker icon appears when the handset speaker phone is used.

Booster icon appears when the Clarity Booster feature is in use.

Privacy icon appears when the Privacy Mode is turned on.

Record icon appears while recording a conversation.

㨮

Talk

w w w . u n i d e n . c o m

D I S P L A Y A N D I C O N S [ 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the Phone

note

Do the following steps:

A. Choose the best location

B. Install the rechargeable battery pack into the handset

C. Connect the base unit and charge the handset

D. Mount the base unit on a wall

If your home has

specially wired alarm

equipment connected to

phone line, be sure that

installing the system

does not disable your

alarm equipment.

A. Choose the best location

Before choosing a location for your new phone, read "Installation Considerations"

on page 74. Here are some important guidelines you should consider:

If you have questions

about what will disable

alarm equipment,

contact your telephone

company or a qualified

installer.

[ 7 ] G E T T I N G S T A R T E D

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. The battery recharges

automatically when the handset is placed in the base unit.

note

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover

downward to remove.

•

Use only the Uniden

(BT-446) rechargeable

battery pack supplied

with your cordless

telephone.

2) Plug the battery connector (red & black wires) into the

jack inside the battery compartment. (The connector

notches fit into the grooves of the jack only one way).

Match the wire colors to the polarity label in the

battery compartment, connect the battery and listen for

a click to insure connection.

Replacement battery

packs are also available

through the Uniden

Parts Department at

(800) 554-3988,

Monday thru Friday from

8:00 a.m. to 5:00 p.m.

or online at

3) Make sure you have a good connection by gently pulling

on the battery wires. If the connection is secure, the

battery jack will remain in place.

www.uniden.com

4) Place the battery case cover back on the handset and

slide it upwards until it clicks into place.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

C. Connect the base unit and charge the handset

1) Connect the AC adapter to the DC

IN 9V jack and to a standard

120V AC wall outlet.

note

•Use only the supplied

AD-800 AC adapter.

Do not use any other

AC adapter.

•Do not place the power

cord where it creates a

trip hazard or where it

could become chafed

and create a fire or

electrical hazard.

Note:

• Connect the AC adapter to a

continuous power supply (i.e., an

outlet that is not controlled by a

switch).

• Place the base unit close to the

AC outlet to avoid long extension cords.

2) Place the handset in the base unit with the keypad facing forward.

3) Make sure that the charge LED illuminates.

If the LED does not illuminate, check to see that the

AC adapter is plugged in and the handset makes

good contact with the base charging contacts.

4) Charge your handset at least 15-20 hours before

plugging into the phone line.

5) Once the handset battery pack is fully charged,

connect the telephone line cords to the TEL LINE

jack and to a telephone outlets.

If your telephone outlet isn't modular,

contact your telephone company for

assistance.

[ 9 ] G E T T I N G S T A R T E D

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

D. Mount the Base Unit on a Wall

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1) Plug the AC adapter into the DC IN 9V jack. Wrap

the AC adapter cord inside the molded wiring

channel as shown.

2) Plug the AC adapter into a standard 120V AC wall

outlet.

3) Plug the telephone line cords into the TEL LINE

jack.

4) Plug the telephone line cords into the telephone

outlets.

5) Align the mounting slots on the base with the

mounting posts on the wall. Then push in and

down until the phone is firmly seated.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the

wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting location that could

cause a hazard when inserting screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.

• Make sure the wall material is capable of supporting the weight of the base and handset.

• Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices suitable for

the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall

(with their appropriate anchoring device), 3

& 15/16 inches apart. Allow about 1/8 of an

inch between the wall and screw heads for

mounting the phone.

2) Refer to steps 1 through 5 on page 10 to

mount the telephone.

[ 1 1 ] G E T T I N G S T A R T E D

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Expanding Your Phone

Four Handset Expandability

Your phone supports up to four handsets,

including any handsets supplied with your

phone. You can now place a fully-featured

cordless handset anywhere AC power is

available to connect the handset charger.

Handsets can be used in DirectLink Mode or

on an intercom call without interfering with incoming calls. It is possible to have a

three-way conference among two handsets and an outside lines. All of the handsets

ring when a call is received.

Backward / Forward Compatibility

Your phone may be compatible with other Uniden 2.4 GHz Digital Expandable

Systems. Please visit our website at www.uniden.com.

If you purchase a DCX700 expansion handset, please register the handset to

the original/main base before use. The DCX700 will not operate until it is

registered.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect the expansion handset's charger

The handset is powered by a rechargeable battery pack. The battery recharges

automatically when the handset is placed in the charger.

note

1) Connect the AC adapter to the DC IN 9V jack and to a

standard 120V AC wall outlet.

2) Set the charger on a desk or tabletop, and place the

handset in the charger with the keypad facing forward.

3) Make sure that the charge LED illuminates.

Use only the supplied

AD-0005 AC adapter.

Do not use any other

AC adapter.

If the LED does not illuminate, check to see that the

AC adapter is plugged in and the handset makes good

contact with the base charging contacts.

4) Charge the handset battery pack for at least 15-20

hours before using your new cordless telephone for the first time.

[ 1 3 ] G E T T I N G S T A R T E D

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

If you purchase an expansion handset, you need to register the handset before use.

Only one handset can be registered at a time.

note

Handsets supplied with the phone are registered to the base by the factory. When

charged, pre-registered handsets display a handset ID number. Handsets that have

not been registered display ^Modelsvary! Charge handset on the base for

registration or refer to Owner's ^Manual.When you register an extra handset to

the base, the handset ID will be assigned.

For the DCX700 expansion handset

1) Before registering the extra handset, the battery

pack MUST be charged for 15-20 hours.

2) Place the extra handset in the main base unit to

begin registration.

3) While the handset is registering, ^Handset

^Registeringwill appear in the LCD. When

Registration Complete is displayed, the handset has

been registered to the base. If ^RegistrationFailed

appears, please try these steps again.

Your phone may be

compatible with other

Uniden 2.4GHz Digital

Expandable Systems.

Please visit our website

at www.uniden.com for

model number

confirmation or call our

customer service at

(800) 297-1023.

For the DCX640 expansion handset (DCT7 series-

compatible model)

1) Disconnect the AC adapter.

2) While holding find hs/ and

connect the AC adapter.

on the base,

Keep pressing find hs/ and

the CHARGE LED starts to blink.

on the base until

3) On the handset, press and hold # until you hear beep.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and

the base unit. Normally, setting the code is not necessary. In the rare situation that

you suspect another cordless telephone is using the same security code, you can

change the code. To change the digital security code:

1. Perform the "System Reset" options ("De-register the Handset" and "Replacing the Base

Setting") for all the handsets you have (see page 25).

2. Re-register each handset by following the steps on page 14.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the

handset. Press down until it clicks.

To remove the beltclip

Pull either side of the beltclip to release the tabs from the

holes.

Optional Headset Installation

Your phone may be used with an optional headset. To use this

feature, insert the headset plug into the headset jack. Your

phone is ready for hands-free conversations. (Headset may be

purchased by calling the Uniden Parts Department or visiting

the web site. See page 69.)

[ 1 5 ] G E T T I N G S T A R T E D

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Main Menu Options

Your phone has four main menu options: DirectLink Mode, Room/Baby Monitor,

note

Handset Setup, Global Setup, and Answering Setup as well as submenu options.

Default Settings

For Global Setup and

System Reset, when

setting options from

the handset, make sure

the line is not in use

and the handsets are

within range of the

base.

The default settings set from the factory match the features that most people use.

You may not need to change them. However, there are a number of options you

must set and entries you must make in memory to take full advantage of all the

phone features. The table below lists the default settings.

Function

Ringer Tones

Distinctive Ring

Auto Talk

Anykey Answer

Banner

Language (LCD)

Key touch tone

Security Code

Ring Time

Handset

Function

Recording Time

Handset

Flicker

one minute

Message Alert

Language (TAD)

Call Screen

Answer Setup

Day & time

CIDCW

Off

English

Off

“ “

English

SUN 12:00 AM

CIDCW on/CWDX off

None

Area Code

Dial Mode

Toll Saver

Tone

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Menu Options

Using the interface

Below are some tips for using the software interface on your phone.

• Press menu/clear to access the main menu.

&KTGEV.KPMꢀ/QFG

4QQOꢀ/QPKVQT

*CPFUGVꢀ5GVWR

• Use /vol/∧ or /vol/∨ to scroll through options.

• Press select/ /audio tone to make a selection.

• Press menu/clear to cancel setting and exit the

menu.

• If you do not press a key within 30 seconds, the phone will time out and exit the

menu mode. When setting Day and Time, the time-out period is extended to two

minutes.

[ 1 7 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Handset Setup

The following submenu options must be set separately for each handset.

Selecting a Ringer Tone

Ringer tone lets you choose from 10 melodies or 10 ringer tones.

You must set a separate ringer tone on each handset.

- Melodies (Beethoven's Symphony #9 [Beethoven9], For Elise [Elise], We Wish You A Merry

Christmas [Merry- Xmas], Home Sweet Home [Hm Swt Hm], Lorri Song #6 [Lorri Song],

When the Irish Eyes Are Smiling [Irish Eyes], Aura Lee, Let Me Call You Sweet Heart

[Sweetheart], Star Spangled Banner [Star Spngl], Old MacDonald [Old MacDld])

- Ringers (Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop, Tone Board, Chip

Chop, Party Clap, Reminder)

1) Press menu/clear. Select the Handset Setup menu,

ꢀꢀ4KPIGTꢀ6QPGU

ꢀ(NKEMGT

ꢀ%NCVVGT

and then the Ringer Tones submenu.

2) Press /vol/∧ or /vol/∨ to move the pointer.

You will hear the ringer or melody as you scroll

through the options.

3) Press select/ /audio tone. You will hear a confirmation tone.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 1 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Distinctive Ringer Setup

Distinctive Ringer allows you to assign a designated ring tone to a stored

phonebook number. When a call is received and the Caller ID information matches

the information in one of the phonebook memory entries, the phone uses the

distinctive ring assigned to that particular caller. You can assign distinctive rings

to multiple phonebook memory entries. Switching the setting to Distinctive Off

disables distinctive ringing: all incoming calls will have a normal ring tone.

Switching to Distinctive On activates all programmed distinctive rings.

1) Press menu/clear. Select the Handset Setup menu,

&KUVKPEVKXGꢀ4KPI

ꢀ1P

ꢀ1HH

and then the Distinctive Ring submenu.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

Setting AutoTalk

AutoTalk allows you to answer the phone simply by removing the handset from the

cradle. You do not have to press any buttons to answer the call.

1) Press menu/clear. Select the Handset Setup menu,

ꢀꢀꢀ#WVQꢀ6CNM

ꢀ1P

ꢀ1HH

and then the AutoTalk submenu.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

[ 1 9 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Anykey Answer

Anykey Answer allows you to answer the phone by pressing any number key,

/tone/ or #/ on the handset.

1) Press menu/clear. Select the Handset Setup menu,

ꢀ#P[MG[ꢀ#PUYGT

ꢀ1P

ꢀ1HH

and then the Anykey Answer submenu.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

Setting the True Banner

True Banner lets you customize the name your handset displays. The name will be

displayed on the LCD screen during Standby Mode, Intercom, Intercom Hold, Room

Monitor, and Copy Phonebook operation. The banner name will be displayed on the

receiving handset as well.

1) Press menu/clear. Select the Handset Setup menu,

ꢀꢀꢀꢀꢀ$CPPGT

/QO U2JQPGꢀꢁꢂ

AAAAAAAAAA

and then the Banner submenu.

2) Use the number keypad (0-9), /tone/ , #/ , or

menu/clear to enter or edit the name.

3) Press select/ /audio tone. You will hear a

confirmation tone.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting a Language

You can change the language the menu display will use. Choose from English,

French, or Spanish.

1) Press menu/clear. Select the Handset Setup menu,

ꢀꢀꢀ.CPIWCIG

'PINKUJ

(TCP㩟CKU

and then the Language submenu.

2) Press

/vol/∧ or /vol/∨ to choose English,

Fran ﾕ ais (French), or Espa ﾃol (Spanish).

3) Press select/ /audio tone. You will hear a

confirmation tone.

Setting the Key Touch Tone

Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn

this tone on or off.

1) Press menu/clear. Select the Handset Setup menu,

-G[ꢀ6QWEJꢀ6QPG

1HH

and then the Key Touch Tone submenu.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

[ 2 1 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Global Setup

If you change one of the global settings, you change that setting for all registered

handsets. Only one handset can change global settings at a time.

Setting Day and Time

Day & Time sets the day and time of your display.

note

1) Press menu/clear. Select the Global Setup menu, and

ꢀꢀꢀ&C[ꢀꢁꢀ6KOG

ꢀꢀ570ꢀꢂꢃꢄꢅꢅꢀ#/

=㨬ꢆ㨲ꢆ㨱ꢆ㨭ꢆ5'.'%6?

then the Day & Time submenu option.

If no key is pressed for

two minutes, the phone

will exit the menu mode.

2) Press /vol/∧ or /vol/∨ to select the day of the

week, and then select/ /audio tone.

3) Press /vol/∧ or /vol/∨ to set the hour, and then

press select/ /audio tone.

4) Press /vol/∧ or /vol/∨ to set the minute, and then press

select/ /audio tone.

5) Press /vol/∧ or /vol/∨ to choose AM or PM, and then press

select/ /audio tone. You will hear a confirmation tone.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Caller ID on Call Waiting (CIDCW)

Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call

while you are on the line. Call Waiting Deluxe (CWDX) allows you to handle call

waiting calls in seven different ways. See page 44 for instructions on using call

waiting deluxe.

1) Press menu/clear. Select the Global Setup menu, and

ꢀꢀꢀꢀꢀ%+&%9

ꢀ%9ꢀ1Pꢀꢁ%9&:ꢀ1P

ꢀ%9ꢀ1Pꢀꢁ%9&:ꢀ1HH

then the CIDCW submenu.

2) Press /vol/∧ or /vol/∨ to select CW On/CWDX On,

CW On/CWDX Off, or CW Off/CWDX Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

Setting the Area Code

If you enter a 3-digit area code number in the "Area Code" option, your local area

code does not appear in the Caller ID message. When calls are received from outside

your local area code, you will see a full 10-digit number.

1) Press menu/clear. Select the Global Setup menu, and

ꢀꢀꢀ#TGCꢀ%QFG

㨫AAꢀꢀꢀꢀꢀꢀꢀꢀꢀ

then the Area Code submenu.

2) Use the number keypad (0-9) to enter a 3-digit area

code. If an area code has already been stored, it will

appear in the display. Press menu/clear to delete the

stored code, then enter a new one.

3) Press select/ /audio tone. You will hear a confirmation tone.

[ 2 3 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Dial Mode

Dial Mode sets the dial mode to tone or pulse. Most phone systems use tone dialing;

the default setting is tone dialing. Set the dialing mode to match the dialing

system used by your local phone service.

• If you are not sure of your dialing system, make a trial call. If the call connects, leave the

setting as is; otherwise set the unit to pulse dialing.

• If your phone system requires pulse dialing and you need to send DTMF tones in certain

situations during a call, you may switch over to tone dialing (refer to "Tone Dialing

Switch-over" on page 32).

1)Press menu/clear. Select the Global Setup menu, and

ꢀꢀ&KCNꢀ/QFG

6QPG

2WNUG

then the Dial Mode submenu.

2) Press /vol/∧ or /vol/∨ to select Tone or Pulse

(the initial setting is Tone).

3) Press select/ /audio tone. You will hear a confirmation tone.

w w w . u n i d e n . c o m

G E T T I N G S T A R T E D [ 2 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

System Reset

De-register the Handset

1) Press and hold end and #/ for more than 5

seconds. Select the Deregister HS submenu.

2) Press /vol/∧ or /vol/∨ to select the handset

ID to be de-registered from the list, and then press

select/ /audio tone. ^DeregisterHS appears.

3) Press /vol/∧ or /vol/∨ to select Yes, and then

9JKEJꢀ*CPFUGV!

*CPFUGVꢀꢀꢀꢀꢁꢂ

*CPFUGVꢀꢀꢀꢀꢁꢃ

&GTGIKUVGTꢀ*5

;GU

press select/ /audio tone. You will hear a

confirmation tone.

Replacing the Base Setting

1) Press and hold end and #/ for more than 5

seconds. Select the Replacing Base submenu.

Replace Base appears.

4GRNCEGꢀ$CUG

;GU

2) Press /vol/∧ or /vol/∨ to select Yes, and then

press select/ /audio tone. You will hear a

confirmation tone.

The base information will be deleted.

When the base information is deleted, the handset displays ^Modelsvary! Charge

handset on the base for registration or refer to Owner's Manual

[ 2 5 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Your Phone

note

Making and Receiving Calls

Making a call

•If the line is already in

use, the base and all

registered handsets

that are not currently

in use will display

From the handset

1) Remove the handset from the charging cradle.

2) Press talk/flash.

3) Listen for the dial tone.

4) Dial the number.

"^LineIn Use."

•The handset

1) Remove the handset from the charging cradle.

2) Dial the number.

If pause is required in the dialing sequence, press pause/redial.

display, which represents a 2-second pause.

3) Press talk/flash.

microphone is located

at the bottom of the

handset.

appears in the

•For best performance,

use the speaker phone

in a quiet room and let

the caller finish

speaking before you

speak. If you or the

other party has

difficulty hearing,

adjust the speaker

volume.

From the Handset Speakerphone

1) Remove the handset from the charging cradle.

2) Press

3) Listen for the dial tone.

4) Dial the number.

5) When the other party answers, talk into the microphone.

w w w . u n i d e n . c o m

B A S I C S [ 2 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Receiving a call

note

1) Remove the handset from the charging cradle. (If AutoTalk is on, the phone will

automatically answer the call when you pick it up.)

2) Press talk/flash.

To set "Autotalk," see

page 19 or to set

"Anykey Answer" see

page 20.

If the handset is off the charging cradle, press talk/flash. If Any Key Answer is on,

you can also press any number key.

Hanging Up

From the handset, press end or return the handset to the charging cradle.

From the handset speak erphone, press end or return the handset to the charging

cradle.

Switching to the Handset Speakerphone During a Call

To switch a normal call to the speakerphone, press

switch from a speakerphone call to a normal call, press

on the handset. To

[ 2 7 ] B A S I C S

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Waiting

If you have Call Waiting service and a call waiting

tone sounds while you are on a call, press talk/flash

on the handset to accept the waiting call. There is a

short pause, and then you will hear the new caller.

To return to the original caller, press talk/flash

again.

note

•You must subscribe

through your local

telephone company to

receive Call Waiting or

Caller ID on call

waiting service.

Placing a Call on Hold

•You can place a call on

hold for 5 minutes.

When 5 minutes has

passed, the call is

disconnected, and the

phone returns to

1) During a call, press hold/transfer/int’com on the handset. The call will be put

in hold.

If you leave a call on hold for more than ten

standby mode.

*QNFꢀVQꢁVTCPUHGT

ꢁ*CPFUGVꢁꢂꢃ

ꢁ*CPFUGVꢁꢂꢄ

seconds, the display screen will read, ^LineOn

•While a call is on hold,

CIDCW can not be

received.

^Hold.

2) To talk to the caller, press talk/flash or

on a

handset. The phone will return to the call.

w w w . u n i d e n . c o m

B A S I C S [ 2 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Redialing a Call

ꢀꢀꢀꢁ4GFKCNꢂ

ꢃꢄꢄꢅꢆꢄꢆꢇꢈꢉ

note

You can quickly redial the last three phone numbers from

the handset.

pause/redial or

/vol/∧ or ∨

•If the number exceeds

32 digits, only the first

32 digits are retained

in redial memory.

Redialing from Standby Mode

1) With the phone in standby mode, press pause/redial .

2) Press pause/redial or /vol/∧ or /vol/∨ to scroll

through the last three number dialed.

ꢀꢀꢀꢁ4GFKCNꢊ

ꢊꢂꢇꢈꢇꢈꢊꢋꢆꢄ

•If the redial memory is

empty, you will hear a

beep.

pause/redial or

/vol/∧ or ∨

3) Press talk/flash or

4) To hang up, press end.

to dial the number in the display.

•To store redial numbers

in the Phonebook, see

page 38.

ꢀꢀꢀꢁ4GFKCNꢆ

ꢃꢂꢅꢈꢈꢈꢂꢊꢂꢊ

Redialing from Talk Mode

1) Press talk/flash or

pause/redial or

/vol/∧ or ∨

2) Press pause/redial. The last number dialed will be

displayed and redialed. To hang up, press end.

Deleting a Redial Record

1) With the phone in standby mode, press

pause/redial.

2) Press pause/redial repeatedly to display the number

to be deleted.

3) Press menu/clear.

4) Press /vol/∧ or /vol/∨ to choose Yes.

&GNGVGꢀ4GFKCNꢁ!

ꢀ;GU

ꢀ0Q

5) Press select/ /audio tone or menu/clear. The redialed number is deleted.

[ 2 9 ] B A S I C S

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the Ringer, Earpiece and Speaker

Volume

note

Ringer volume

Your phone provides three ringer volume options (off,

low, or high) on the handset and four options (off, low,

medium, or high) on the base. With the phone in standby

mode, press /vol/∧ or /vol/∨ on the handset or

volume/

on the base to adjust the ringer volume.

Earpiece (Handset only) and speaker volume

During a call, press /vol/∧ or /vol/∨ on the handset

to adjust the handset earpiece volume. To adjust the base

spaker volume, press volume/

while using the base.

This setting will remain in effect after the telephone call

has ended.

You can only mute the

handset ringer if the

handset is off the base

when the phone starts

ringing.

Ringer Mute

You can mute the ringer tone temporarily for each handset. When the phone is

ringing, press end on the handset you want to mute. The mute will last for the

current incoming call only. The ringer tone will return to the previous setting

starting with the next incoming call.

w w w . u n i d e n . c o m

B A S I C S [ 3 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Tones

The audio tone features provide three different tone levels. If you have difficulty

hearing a caller, press select/ /audio tone. The default setting, Natural Tone, is

recommended for hearing aid users.

note

•You can change the

audio tone level during

a call, intercom, room

monitor or DirectLink.

Mute Microphone

You can temporarily mute the microphone so that the caller cannot hear you.

•The Audio Tones

feature can not be

used while using

speaker phone.

1) Press menu/clear during talk mode (while the phone is in use) to mute the

microphone.

2) Press /vol/∧ or /vol/∨ to move the pointer to Mute and then

select/ /audio tone.

Mute On and

when Mute is set to on, ^MuteOff appears.

appear in the display. To cancel muting, repeat above step again

[ 3 1 ] B A S I C S

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you can

switch-over to tone dialing after the call connects. This

feature is useful when you need tone dialing to use any

automated menu systems, such as telephone bank tellers,

telephone prescription refills, customer support menus,

etc.

If your phone is set to pulse dialing mode, make your call

normally. Once your call connects, press the /tone/

key. Any digits you enter from then on will be sent as tone digits. When this

particular call ends, the phone automatically returns to pulse dialing mode.

Traveling Out of Range

During a call, as you begin to move your handset too far from your base unit, noise

may increase. If you pass the range limits of the base unit, you will hear a beep and

see ^{Out of}Range on the display, and then the handset returns to standby mode. You

may return to the call if you move your handset within the range limits of the base

and press talk/flash or

within 30 seconds.

w w w . u n i d e n . c o m

B A S I C S [ 3 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Clarity Booster

note

If you encounter interference while using your phone,

you can manually improve the sound by setting the

Clarity Booster to on. This works only when the

phone is in use.

6CNMꢀꢀꢀꢀꢀꢀ$

ꢀꢀꢀꢀ$QQUVꢀ1P

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢁꢂꢃꢄ

1) While on a call, press menu/clear.

2) Press /vol/∧ or /vol/∨ to move the pointer to Clarity Boost,

and then select/ /audio tone.

Boost On and

appear in the display.

Use the same procedure to turn off Clarity Booster. ^BoostOff appears.

Privacy Mode

Privacy mode prevents interruption from other registered handsets. This works only

If another handset is in

Privacy Mode, you

cannot join the call. If

someone is using the

handset in Privacy

Mode, ^Unavailable

appears in the display

when you try to join the

call.

when the phone is in use.

1) While on a call, press menu/clear.

2) Press /vol/∧ or /vol/∨ to move the pointer to Privacy Mode, and then

select/ /audio tone.

Privacy Mode On and

join a call, exit privacy mode. Use the same procedure above. ^PrivacyMode Off

appears.

appear in the display. To allow other registered handset to

[ 3 3 ] B A S I C S

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Conferencing

If you have more than one handset, up to three people can participate in a

conference call. A three-way conference call consists of an outside line and two

handsets. You can easily join a call already in progress.

1) Press talk/flash or

on the handset to join the call.

2) To hang up, return the handset to the cradle or press

end on the handset. The other handset will still be

connected to the call.

Find Handset

To locate the handset, press find hs/ on the base

when the phone is in standby mode. All registered

handsets beep for 60 seconds, and ^Pagingappears on

the handset display. To cancel paging, press any key

on the handset or find hs/ on the base.

note

If the battery pack is

completely drained, the

handset will not beep.

w w w . u n i d e n . c o m

B A S I C S [ 3 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the Phonebook

You can store names and numbers in your phone’s phonebook, search for names

alphabetically, and dial phonebook entries with just a few key presses. Phonebook

memory is stored independently in the cordless handsets. You can store up to 100

numbers in each handset.

The phone uses the same memory locations to store phonebook entries and Caller ID

messages. Any empty phonebook locations are used to store Caller ID messages. For

example, if you have stored 100 phonebook entries on your handset, the handset

will not store Caller ID messages.

The memory locations in the handset are not limited to phone numbers. You can

also store a group of numbers (up to 20 digits) that you need to enter once your

call connects. This is referred to as Chain Dialing.

Storing and Editing Phone Numbers, Names, Distinctive Rings and

Speed Dial

1) When the phone is in standby mode, press

2) Press /vol/∧ or /vol/∨ to select Store newly.

3) Press select/ /audio tone. Store/Edit Name

appears.

5VQTGꢀ'FKVꢁ0COG

㨫

[ 3 5 ] P H O N E B O O K

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

4) Enter the name (up to 16 characters) by using the number keypad. If a name is

not required, go to step 5 <No Name> will be used as the name.

Refer to the letters on the number

Number of times key is pressed

keys to select the desired characters.

With each press of a number key (0-

9), the displayed character appears

in the following order:Upper case

letters first, lower case letters next

and finally the number corresponding

to the key.

For example, to enter Movies:

1)Press 6 once, and then press #/

to move the cursor to the right.

2)Press 6 six times.

3)Press 8 six times.

4)Press 4 six times.

5)Press 3 five times.

6)Press 7 eight times.

If you make a mistake while entering a name

Use /tone/ or #/ to move the cursor to the incorrect character.

Press menu/clear to erase the wrong character, and then enter the correct

character. To delete all characters press and hold menu/clear.

w w w . u n i d e n . c o m

P H O N E B O O K [ 3 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

5) Press select/ /audio tone to store the name;

ꢀ5VQTGꢁ'FKVꢀ0Qꢂ

ꢃꢄꢄꢅꢆꢄꢆꢇꢈꢉ㨫

Store/Edit No. appears.

note

6) Use the number keypad, /tone/ , or #/ to enter

the phone number (up to 20 digits). To insert a 2-

•Selecting a phonebook

location where a

second pause in the dialing sequence, press pause/redial.

If you make an error, use menu/clear to erase the incorrect digits. When you are

finished, press select/ /audio tone to store the number.

number is already

stored overwrites the

old number. The new

number will be stored

in the phonebook

location.

7) If you store the phonebook location from the

&KUVKPEVKXGꢀ4KPI

handset, ^DistinctiveRing appears. Press /vol/∧

ꢀ0Qꢀ5GNGEVP

or /vol/∨ to move the pointer to one of the

Distinctive Ring options and then press

•When the memory is

full, you will hear a

beep and ^{Memory Full}

appears. You cannot

store names and

ꢀ(NKEMGT

select/ /audio tone.

If you choose not to store a Distinctive Ring, simply select the "No Selectn"

option.

numbers.

•The pause key counts

as one digit. Pressing

pause/redial more

than once increases the

length of the pause

between numbers. Each

pause represents a 2

second delay.

8) ^SpeedDial appears. Press /vol/∧ or /vol/∨ to

ꢀꢀꢀ5RGGFꢀ&KCN

ꢀ0Qꢀ5GNGEVP

ꢀ52&ꢁꢂꢃ'ORV[

move the pointer to select the Speed dial location (10

locations: SPD1-SPD0).

If you choose not to store the name/number as a

Speed Dial, simply choose the "No Selectn" option.

[ 3 7 ] P H O N E B O O K

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

9) Press select/ /audio tone. You will hear a

/QXKGU

ꢀꢁꢁꢂꢃꢄꢁꢂꢄꢅꢆꢇ

㨰$GGVJQXGPꢈꢉ52&ꢊ

confirmation tone, and ^Done!appears in the display.

note

Storing Caller ID Messages in the Phonebook

Messages shown in the Caller ID list (see page 45) can be stored in the phonebook.

The phone number and name of the party on the Caller ID list can be stored in

memory.

•If a call comes in via a

telephone system that

does not offer Caller ID

service, no information

is stored.

1) When the phone is in standby mode, select the Caller ID message to be stored.

2) Press select/ /audio tone. ^Store/EditName appears.

•If the Caller ID

message was received

as a private/unknown

number, or the

If the Caller ID message is already stored in memory, you will hear a beep and

This data is already stored!! appears. The number will not be stored.

message does not have

the number, you

cannot store the

message in the

3) To complete the setting, follow the steps 4-9 in “Storing and Editing Phone

Numbers, Names, Distinctive Rings and Speed Dial” on page 35.

phonebook. If it was

received as private/

unknown name, the

message will be stored

as <No Name>.

Storing a Redial Record

1)With the phone in standby mode, press pause/redial.

2) Press pause/redial repeatedly to display the number to be stored.

3) Press select/ /audio tone. ^Store/EditName appears.

4) To complete the setting, follow the steps 4-9 in “Storing and Editing Phone

Numbers, Names, Distinctive Rings and Speed Dial” on page 35.

•Even if all 100 memory

locations are full, the

message will be stored

in the phonebook.

However, the message

will be erased from the

Caller ID list.

w w w . u n i d e n . c o m

P H O N E B O O K [ 3 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing the Phonebook

note

1) Press

2) Press /vol/∧ or /vol/∨ to select Dial/Edit, and then press select/ /audio

During a call, don’t

press end or the call

will disconnect.

tone.

3) Press /vol/∧ or /vol/∨ to scroll through the phonebook locations.

Phonebook locations appear in alphabetical order (from first to last when you

press /vol/∨, from last to first when you press /vol/∧).

You can also use the letters on the number keys to select the first letter of the

desired name. Press a number key (2-9 and 0) once for the first letter, twice for

the second letter, and so on. The first location that begins with the letter you

entered appears.

For example, to search for an entry beginning with the letter M, press 6 once.

Press /vol/∧ or /vol/∨, until the phonebook location is displayed.

4) To finish the viewing operation, press end (or

during a call).

[ 3 9 ] P H O N E B O O K

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Making Calls Using the Phonebook

1) When the phone is in standby mode, view the

/QXKGU

ꢀꢁꢁꢂꢃꢄꢁꢂꢄꢅꢆꢇ

㨰$GGVJQXGPꢈꢉ52&ꢊ

phonebook location to dial (see "Viewing the

Phonebook" on page 39).

2) Press talk/flash or

3) To hang up press end.

From Talk Mode

1) Press talk/flash or

2) View the phonebook location to dial (see "Viewing the Phonebook" on page 39).

3) Press select/ /audio tone. The number in the displayed phonebook location is

dialed.

4) To hang up press end.

Speed Dialing

You can program up to ten speed dial numbers in each handset. You must program a

speed dial number before you can use the speed dialing feature. When the phone is

in standby mode, press and hold a number key (0-9) associated with the speed dial

until the phone number appears, and then press talk/flash or

The number stored in the speed dial (SPD1 - SPD0) is dialed.

on the handset.

w w w . u n i d e n . c o m

P H O N E B O O K [ 4 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing or Erasing a Stored Name, Phone

Number, Distinctive Ring and Speed Dial

1) When the phone is in standby mode, press

To delete all phonebook locations, press /vol/∧ or

/vol/∨ to select Delete All, and press select/

audio tone. ^DeleteAll? appears. Use /vol/∧ or

vol/∨ to select Yes, and then press select/ /audio

tone. You will hear a confirmation tone.

2) Press /vol/∧ or /vol/∨ to select Dial/Edit, and then press

select/ /audio tone.

3) Use /vol/∧ or /vol/∨ or the number keypad to select desired phonebook

entry (see "Viewing the Phonebook" on page 39).

4) When you have found the desired phonebook entry, Press select/ /audio tone

to edit the entry.

To delete the entry, press menu/clear and /vol/∧ or /vol/∨ to select Yes,

and then press select/ /audio tone.

5) If you are deleting the entry, you will hear a confirmation tone, and ^Deleted!

appears in the display.

If you are editing the entry, follow the steps 4 to 9 under "Phonebook (Storing

and Editing Phone Numbers, Names, Distinctive Rings, and Speed Dial)" on

page 35 to complete the editing operation.

[ 4 1 ] P H O N E B O O K

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Copying Phonebook Locations

If you have more than one handset, you can transfer stored phonebook locations

from one handset to another without having to manually re-enter names and

numbers. You can transfer one phonebook memory location at a time or all memory

locations at once.

note

•Even if all 100 memory

locations are full, the

message will be stored

in the phonebook.

However, the oldest

Caller ID message will

be erased from the

Caller ID list.

1) When the phone is in standby mode, press

2) Press /vol/∧ or /vol/∨ to select Copy, and then press select/ /audio tone.

3) Press /vol/∧ or /vol/∨ to select the handset to

•If you stored 100

phonebook locations,

you can not store the

phonebook locations

and you will hear the

beep.

%QR[ꢀ2JQPGDQQM

1PGꢀ/GOQT[

#NNꢀ/GOQT[ꢀꢁZZZ

which you want transfer the phonebook locations

and then press select/ /audio tone.

4) Press /vol/∧ or /vol/∨ to select One Memory or

All Memory, and then press select/ /audio tone.

•If the selected handset

is party is in out of

range or data transfer

is canceled,

If you select All Memory, ^Areyou sure? appears on the display screen. Press

/vol/∧ or /vol/∨ to select Yes, and then press the select/ /audio tone.

Unavailable

appears in the display.

Phonebook locations

will not be transferred.

If you select ^{One Memory}, press /vol/∧ or /vol/∨, or the number key (2-9 and

0) to select the phonebook location you want to export and then press

select/ /audio tone.

5) The phonebook locations will be transferred to the handset. ^Copyingand the

receiving handset name appear in the display. When the transfer is completed,

Done! appears on the handset.

w w w . u n i d e n . c o m

P H O N E B O O K [ 4 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Caller ID and CIDCW (Caller ID on Call Waiting)

note

You must subscribe to Caller ID services through your local telephone provider to

use these features.

When the telephone rings, the Caller ID feature allows you to view the caller’s

name, phone number, date and time of call. With CIDCW (Caller ID on Call Waiting),

you will hear a call waiting tone while you are on a call, and the Caller ID data is

displayed. To accept the waiting call, press talk/flash. Additionally, you can dial a

number stored in the Caller ID list or save data to your phonebook locations.

•If you answer a call

before the Caller ID

message is received,

the Caller ID message

will not appear.

•When the call is

received via a

Important:

Memory locations for Caller ID messages and phonebook locations (including Speed

Dials) are common; you can store up to all 100 locations for each handset. A Caller

ID message is not stored when you have stored 100 of the phonebook locations.

When you have stored all 100 of the phonebook locations and Caller ID messages in

total, the earliest Caller ID message is overwritten.

telephone company

that does not offer

Caller ID service, the

caller’s phone number

and name does not

appear. (This includes

some international

calls.)

The date and time received ꢀꢁꢂꢀꢃꢄꢀꢀꢅꢃꢁ#/

Caller's name ,CPGꢄ5OKVJ

•When the call is via a

private branch

exchange (PBX), the

caller's phone number

and name may not

appear.

Caller's phone number ꢃꢀꢆꢇꢈꢈꢈꢇꢀꢃꢉꢆ

When the Caller ID message is received, the display shows the caller's phone number

along with the date and time. The incoming call information is stored in the Caller

ID record. If the Caller ID service includes the caller's name, the name will appear in

the display (up to 15 characters).

[ 4 3 ] C A L L E R I D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

You may receive any one of the following messages:

When a private name is received

When a private number is received

When a unknown name is received

Private Name

Private Number

Unknown Name

When a unknown number is received : Unknown Number

When invalid data is received

Incomplete Data

Data errors appear as "❚."

Call Waiting Deluxe Features

Your phone gives you new options for call waiting. At the touch of a button, you

can place the caller on hold, send them to your voice mail service, or conference

them into your current call. You must subscribe to Call Waiting and Call Waiting

Deluxe to use these features. Not all features are available in all areas. Check with

your local telephone company for details.

note

•To activate features,

select ^CWOn/CWDX

^Onin the CIDCW

option. See page 23.

1) When you receive a Call Waiting call, press menu/clear.

2) Press /vol/∧ or /vol/∨ to select CW Deluxe, and then press

select/ /audio tone.

•If you don't press a key

within 30 seconds

while in the operation,

the phone back to a

call. To return back to

a call, press

3) Press /vol/∧ or /vol/∨ or the number keypad (1-7) to select an option.

AsktoHold- A p re re c o rde d me s sa ge s t a t e s t h a t u s e r w i l l b e a v a i l a b l e s ho r t l y,

and the call is place on hold.

talk/flash.

Tell Busy - A prerecorded message tells the caller you are busy, and the waiting

call is disconnected.

w w w . u n i d e n . c o m

C A L L E R I D [ 4 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Forward Call - The caller is sent to your voice mail box, if available.

Answer/Drop 1 - Disconnects the first call, and connects to the

new caller.

Conference - Starts a conference call with your first and second

callers.

Drop First/Drop Last - During a conference call, allows you to choose to drop

the first or last caller.

note

•Check with your local

telephone company for

a full list of options.

4) Press select/ /audio tone. A confirmation screen will appear, and the phone

returns to the call.

Viewing the Caller ID List

The Caller ID list stores information for incoming calls - even unanswered calls.

You can store up to 100 Caller ID messages and phonebook locations (including

Speed Dials) for each handset. You can view the Caller ID list through the handset

during a call or when the phone is in standby mode.

•The number of calls

from the same Caller ID

appears next to the the

received time. Once

you view the new

message, the number

will disappear.

1) Press cid. The summary screen appears. The screen

ꢀꢀꢀ%CNNGTꢀ+&

ꢀꢀꢀ0GYꢀꢀꢁꢀꢀꢂ

ꢀꢀꢀ6QVCNꢁꢀꢃꢂ

shows the number of new messages and total

messages.

2) To view the Caller ID messages in historical order

(newest to oldest or from oldest to newest), use,

/vol/∨ to scroll through the messages from the latest to the earliest, or

vol/∧ to scroll back through the messages.

To view the Caller ID messages with alphabetical search, press the number key pad

(2-9 and 0) with the letter associated with the first letter of the desired message.

[ 4 5 ] C A L L E R I D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Once you view the Caller ID list with alphabetical search, you cannot switch

back to historical order unless you exit and re-enter the operation.

note

3) To finish the viewing operation, press end (or cid during a call).

•During a call, don’t

press end or the call

will disconnect.

Deleting Information from the Caller ID List

1) When the phone is in standby mode, view the Caller

&GNGVGꢀ%CNNGTꢀ+&

ꢀ;GU

ꢀ0Q

ID information to be deleted (see "Viewing the Caller

•Once the Caller ID data

has been deleted, the

information cannot be

retrieved

ID List" on page 45).

2) Press menu/clear.

3) Press /vol/∧ or /vol/∨ to select Yes.

4) Press select/ /audio tone. You will hear a confirmation tone.

Deleting all Caller ID name/numbers

1) When the phone is in standby mode, press cid.

ꢀꢀꢀ%CNNGTꢀ+&

2) Press menu/clear. ^DeleteAll? appears.

ꢀꢀꢀ0GYꢀꢀꢁꢀꢀꢂ

3) Press /vol/∧ or /vol/∨ to choose Yes.

ꢀꢀꢀ6QVCNꢁꢀꢃꢂ

4) Press select/ /audio tone. You will hear a

confirmation tone.

&GNGVGꢀ#NN!

ꢀ;GU

ꢀ0Q

w w w . u n i d e n . c o m

C A L L E R I D [ 4 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Calling a Party from the Caller ID List

note

1) When the phone is in standby mode, select the Caller

ID message (see "Viewing the Caller ID List" on

page 45).

ꢀꢁꢂꢀꢃꢄꢀꢀꢅꢃꢁ#/

,CPGꢄ5OKVJ

ꢃꢀꢆꢇꢈꢈꢈꢇꢀꢃꢉꢆ

You cannot make a call

from the Caller ID list if

your phone is connected

to a private branch

2) To add a "1" to front of the displayed Caller ID

number, press /tone/ . To delete a "1" from the

front of the displayed caller ID number, press /tone/ again.

exchange (PBX).

To add the stored area code to front of the displayed Caller ID number, press

#/ . To delete the area code from the display, press #/ again.

3) Press talk/flash or . The displayed phone number dials automatically.

1) Press talk/flash or

2) View the Caller ID message you want to dial (see "Viewing the Caller ID List" on

page 45).

3) Press select/ /audio tone. The displayed phone number will be dialed.

[ 4 7 ] C A L L E R I D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

The Integrated Telephone Answering Device

The phone has a built-in answering system that answers and records incoming calls.

You can also use your answering system to record a conversation, leave a voice

memo message, or announce a special outgoing message to callers when you're

away from your phone.

Features

• Digital Tapeless Recording

• Up-to 13 minutes of Recording Time

• Call Screening

• Personal or prerecorded Outgoing Messages

• Voice Prompts for TAD (English, Spanish, or French)

• Time and Day Announcement

• Remote Message Retrieval

• Toll Saver

• Conversation Recording

• Voice Memo

• Message Alert On/Off

• Retrieve TAD Messages using Handset

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 4 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Answering System Setup

This main menu option allows you to set up the built in answering device from the

handset.

Setting a Security Code

Security code allows you to set a two-digit security code so you can play your

messages from a remote location.

1) Press menu/clear. Select the Answ. Setup menu, and

ꢀ5GEWTKV[ꢀ%QFG

then the Security Code submenu.

ꢁꢂ

2) Enter a two-digit security code (01-99) using the

number keypad (0-9).

3) Press select/ /audio tone. You will hear a confirmation tone.

Setting the Ring Time

Ring Time allows you to set the number of rings the caller hears before your answering

system plays the outgoing message. You can set the ring time to answer after two, four,

or six rings. If you enable the Toll Saver (TS), the answering system picks up after two

rings if you have new messages and after four rings if there are none.

1) Press menu/clear. Select the Answ. Setup menu, and

ꢀꢀꢀ4KPIꢀ6KOGꢀ

then the Ring Time submenu.

ꢀ6QNNꢀ5CXGT

ꢀꢁꢀ6KOGU

2) Press /vol/∧ or /vol/∨ to select a Ring Time (Toll

Saver, 2 Times, 4 Times, or 6 Times).

3) Press select/ /audio tone. You will hear a confirmation tone.

[ 4 9 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Setting the Record Time

Record Time sets the duration for recording the incoming messages. You have three

record time options. The options "one minute" or "four minutes" set the duration

for recording the incoming messages. "Announce only" answers the call but

prevents the caller from leaving a message.

note

If you select Announce

Only and turn the

answering system on,

the answer LED will

flash.

1) Press menu/clear. Select the Answ. Setup menu, and

ꢀꢀ4GEQTFꢀ6KOGꢀ

then the Record Time submenu.

ꢀꢁꢀ/KPWVG

ꢀꢂꢀ/KPWVGU

2) Press /vol/∧ or /vol/∨ to select Record Time (1

Minute, 4 Minutes, or Announce Only).

3) Press select/ /audio tone. You will hear a confirmation tone.

Setting the Message Alert On or Off

Message Alert sounds an alert tone when you have an unheard message. If you set

the Message Alert on, whenever a new message is received, the soft alert tone will

sound every 15 seconds. When all messages have been played back, the alert tone

automatically deactivates.

1) Press menu/clear. Select the Answ. Setup menu, and

ꢀ/GUUCIGꢀ#NGTVꢀ

ꢀ1P

ꢀ1HH

then the Message Alert submenu.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

Turning the message alert tone off by pressing any key

To quickly turn off the Message Alert tone, press any key on the base unit; the tone

will automatically deactivate.

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 5 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Language of your Answering System

Language allows you to set the language of your answering system announcements

to English, French, or Spanish.

1) Press menu/clear. Select the Answ. Setup menu option,

ꢀꢀꢀꢀ.CPIWCIGꢀ

and then the Language submenu.

ꢀ'PINKUJ

ꢀ(TCP㩟CKU

2) Press /vol/∧ or /vol/∨ to choose English, Franﾕais

(French), or ^Espaﾃol (Spanish).

3) Press select/ /audio tone. You will hear a confirmation tone.

Setting the Call Screen

Call Screen allows you to listen (from the base) to the incoming message being left

by the caller before you answer the call.

1) Press menu/clear. Select the Answ. Setup menu and

ꢀꢀ%CNNꢀ5ETGGPꢀ

ꢀ1P

ꢀ1HH

then the Call Screen submenu.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone.

[ 5 1 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Turning the Answering System On/Off

You can turn the Answering System On/Off from Answ. Setup menu.

note

1) Press menu/clear. Select the Answ. Setup menu and

ꢀ#PUYGTꢀ/QFG

ꢀ1P

ꢀ1HH

then the Answer Setup submenu.

•If you make an outside

call or a call is

received during the

operation, the

operation is canceled.

2) Press /vol/∧ or /vol/∨ to select On or Off.

3) Press select/ /audio tone. You will hear a

confirmation tone. The answer LED will light if you

turn the answering system on.

•The answer LED blinks

if you set Announce

Only to on.

Setting Your Outgoing Message (Greeting)

When you receive a call, the answering system automatically plays either the pre-

recorded message or your own greeting.

The following message is pre-recorded: "Hello, no one is available to take your call.

Please leave a message after the tone."

Recording a Personal Outgoing Message

The answering system allows you to record a personal outgoing message (greeting)

which the answering system automaticlly plays when you receive a call.

1) With the phone in standby mode, press select/ /audio tone.

2) During the annoucement "To record memo message, press seven. To record your

greeting, press eight. For help, press zero.", press 8.

3) After the announcement "Record Greeting," record your greeting.

4) When you are finished recording, press 5 or 8. You will hear a beep. Your

greeting will playback for confirmation.

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 5 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting Your Greeting

The phone allows you to choose between the two outgoing messages, a prerecorded

message or your own greeting.

1) With the phone in standby mode, press select/ /audio tone.

2) During the annoucement "To record memo message, press seven. To record your

greeting, press eight. For help, press zero.", press 5.

3) Press 6. The current outgoing message is played.

4) While the outgoing message is playing, press 6. Each time you press 6, the phone

switches the outgoing message between the prerecorded and your own greeting.

To delete the personal greeting, press /4 while the outgoing message is playing.

The system announces "Greeting has been deleted".

Announce only feature

The announce only feature plays a pre-recorded outgoing message or your own personal

outgoing message, but it will not allow the caller to leave a message. To set announce

only, follow the steps on "Setting the Record Time" page 50. If you want to use your

own greeting and you want to change your greeting to omit the prompt to leave a

message, see "Recording a Personal Outgoing Message" on page 52 for instruction.

The following message is pre-recorded:

"Hello, no one is available to take your call. Please call again."

[ 5 3 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Using Your Answering System

The new message LED on the handset and base blink when you

have new messages in your answering system. The LED stops

flashing when all new messages are played back.

note

•When the answering

system is full, you will

hear "The memory is

full. Please erase your

messages." and the

message LED will blink

quickly. You should

The answering system is designed to play your new messages first.

After you play all your new messages, you can then play your old

messages.

delete some messages

so that the system can

record new messages.

Playing your messages

1) When the base is in standby mode, press

The system announces the number of new and old

messages. The time and day that each message was

received is announced after the message is played.

The message number is announced in the begining

of each message.

•The time stamp will

not be heard until you

have set the time.

2) When all new messages have been played, you hear a confirmation tone, and the

system announces "End of messages." The system returns to standby. After you

have reviewed your new messages, you can play your old messages by pressing

again. Once you have listened to a new message, it then becomes an old

message. The old messages will be played in the order in which they were

received.

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 5 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeating a message

1) Press

to review your messages.

2) To repeat the current message, press

after a few seconds of beginning the

message. To quickly scroll backwards through a message, press and hold . To

repeat the previous message, press

during remote operation) after a message begins playing. If you have several

messages, press repeatedly until you return to the message you want to

within a few seconds (about four seconds

replay. If the current message is the first new message, the system plays back

from the beginning of the current message (it does not go back into the old

message group).

3) Press

at any time to stop reviewing messages and return to standby.

Skipping a message

1) Press

2) Press

to review your messages.

at anytime to skip to the next message.

Each time

is pressed, the system scans forward one message. If you have

several messages, press

repeatedly to find the message you want to play. To

quickly scroll through a message, press and hold . The system advances

through the playback at double speed.

3) Press

at anytime to stop reviewing your messages and return to standby.

[ 5 5 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Deleting a message

To maintain maximum record time, delete the old messages. When you press ∅, you

are permanently deleting the message. Once deleted, the message cannot be

replayed or retrieved.

1) Press

to review your messages.

2) Press ∅ at anytime during the message to delete the message. You hear a

confirmation tone and the message is deleted.

3) To delete all messages, press ∅ when the phone is in standby mode. After the

announcement "To delete all messages, press delete again," press ∅ again.

When you try to delete all messages without first listening to your new messages,

you hear several short beeps followed by an announcement "Please playback all

messages." This protects you from accidentally erasing messages you have not yet

reviewed.

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 5 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a conversation

You can record a conversation from the handset (more than two seconds and less

note

than ten minutes).

1) During a conversation, press menu/clear.

2) Press /vol/∧ or /vol/∨ to select Call Record, and then press

•If the recording

memory is full,

Unavailable appears

in the display. You can

not record a

select/ /audio tone. ^Recordinga Call appears on the display.

A confirmation tone that can be heard by both parties sounds during recording.

To stop recording repeat above step again, ^StopRecording appears.

conversation until you

clear some messages

from the memory.

•Every state has

different regulations

governing the

Screening a call

From the base

To screen an incoming call, use the following steps:

After the answering system answers, the base speaker will let you hear the calls as

recording of

conversations over the

telephone. Make sure

to check your local,

state and federal laws

before using this

product to record any

telephone

the machine records the message. To adjust the volume, press volume/

you set the answering system to off, you cannot screen a call.

. If

conversation in order

to determine that your

use is in compliance

with such laws or

guidelines.

To mute the Call Screen, press

From the handset

Press select/ /audio tone when the system is answering. To answer the call, press

•You can not record

talk/flash,

or any number key, /tone/ ,or #/ (when AutoTalk is set to on).

intercom

conversations.

The answering system will disconnect automatically.

•To activate this

feature, you must turn

the Call Screen feature

on. See “Setting the

Call Screen“ on

Note:

If you press the select/ /audio tone while another handset is screening a call,

you will hear a beep and you can not screen a call.

page 51.

[ 5 7 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Remote Operation

note

You can check, play, or delete messages, from a remote location (when you are away

from home, or from another room using a handset). Additionally, you record, select,

or delete your own greeting message.

•For the Repeat a

Message function,

• If you press end before the answering system answers, the phone will return to standby.

• When the answering system does not answer within 6 seconds, you hear a beep and the

phone will return to standby.

press

/1 within

about four seconds to

repeat the previous

message, or press

• When you receive a call, the remote operation is canceled.

• You can change the handset volume during a remote operation.

• If you have new messages and old messages, after you have reviewed your new

messages, you can play your old messages by pressing /2 again.

/1 after about four

seconds to repeat the

current message.

•To switch to normal conversation, press

on the handset.

•Messages will be

played in the order in

which they were

received. The time and

day that each message

was received is

announced after the

message is played.

Remote access with the handset

You can operate your answering system from another room using a handset.

1) When the phone is in standby mode, press select/ /audio tone on the handset.

Remote operation press [0-8] appears on the handset display. The answering

system announces the current time and the number of messages stored in the

memory.

2) You hear the announcement, "To record memo message, press seven. To record

your greeting, press eight. For help, press zero."

- To record memo, press 7 (see "Voice Memo" on page 60." for instruction).

- To record a personal greeting message, press 8 (see "Recording a Personal

Outgoing Message" on page 52." for instruction).

3) If you have no message, the answering machine will enter command waiting

mode, please proceed to step 4.

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 5 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

If you have any incomming message, the answering system start playing the

message. Total number of messages and the message number appears. The time

and day that each message was received is announced after the message is

played.

note

/1 Repeat a Message

Delete a Message

The greeting must be

more than two seconds

long and less than 30

seconds.

/3 Skip a Message

Stop Operation.

To stop the operation and proceed to another command, press /5,

or press end to exit the system.

4) Enter a command within 30 seconds. Select a command from the following chart:

While playing a message, select a command from the following chart and enter:

Remote Key Function

Play incoming Messages

Memo Record/Stop**

Greeting Message Record/Stop**

Help

Stop Operation

Play Greeting Message

** For the Memo Record and Greeting Message Record function, the first time you

enter the corresponding command, it starts the Recording function. If you want

to stop the recording, enter the command again.

5) After the command has finished, you will hear intermittent beeps indicating that

the system is waiting for a command. You may enter another command at this

time from the chart above.

6) When you are finished, press end to exit the system.

[ 5 9 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Voice Memo

The voice memo function allows you to record messages (more than two seconds

and less than four minutes). The voice memo messages are recorded as an incoming

messages.

note

1) With the phone in standby mode, press select/ /audio tone.

2) During the annoucement "To record memo message, press seven. To record your

greeting, press eight. For help, press zero.", press 7.

3) Start recording after the announcement "Record memo message" and the

confirmation tone.

•When the answering

system is full, you will

hear the announcement,

"The memory is full,

Please erase your

messages.", and

recording is terminated.

When recording is finished, press 5 or 7.

•The time stamp will not

be heard until you have

set the time. See

"Setting Day and Time"

on page 22.

•The system will only

playback messages for

four minutes and then

it returns to the

command waiting mode.

To continue playing

your messages, press 0

then 2 again within 15

seconds.

Remote access away from home

You can operate your answering system from a remote location using any touch-

tone telephone.

1) Call your telephone number and wait for the system to answer. If the answering

system is off, it will answer after about ten rings and sound a series of beeps.

2) During the greeting message (or a series of beeps when the answering system is

off), press 0 and enter your security code within two seconds (see "Setting a

Security Code" on page 49).

3) The answering system announces the current time and the number of messages

stored in memory. You hear "To play incoming messages, press zero-two. For

help, press one-zero." You will hear a beep. During the remote operation, ^Line

^Remoteappears on the display.

•If you enter an

incorrect security code

three times, you will

hear a beep and the

system will return to

standby.

4) Enter a command within 15 seconds, each command there after must be entered

within two seconds. You may select a command from the following chart:

w w w . u n i d e n . c o m

T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 6 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Command

Function

Repeat a Message*

Command

Function

Answering System On

Memo Record/Stop**

Greeting Message Record/Stop**

Answering System Off

Help

0 then 1

0 then 2

0 then 3

0 then 4

0 then 5

0 then 6

0 then 7

0 then 8

0 then 9

1 then 0

note

Play incoming Messages

Skip a Message

For your convenience, a

remote operation card is

provided for you to use

while away from home

(refer to page 80).

Delete a Message

Stop Operation

* For the Repeat a Message function, press 0 then 1 within about four seconds to

repeat the previous message, or press 0 then 1 after about four seconds to repeat

the current message.

**For Memo Record and Greeting Message Record function, the first time you enter

the corresponding command, it starts the Recording function. If you want to

stop the recording, enter the command again.

5) After the command has finished, you hear intermittent beeps indicating that the

system is in the command waiting mode. You may enter another command at this

time from the chart above.

6) When you are finished, hang up to exit the system. The answering system

automatically returns to standby.

[ 6 1 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Multi-Handset Features

The features in this section require a minimum of two handsets to operate. To add

additional handsets to your system, see "Expanding Your Phone" on page 12.

note

•Handsets can be in

Direct Link mode while

other handsets are in

use.

Using DirectLink Mode

In DirectLink Mode, a pair of handsets can

function as two-way radios. You can have up

to two pairs of handsets in DirectLink Mode at

a time. DirectLink Mode does not interfere

with the main base's ability to make or receive

telephone calls. Use them at sporting events

or while shopping to stay in contact with

family members or friends. You must set both

handsets to DirectLink Mode to activate this feature.

•While a pair of

handsets are in

Directlink mode, they

cannot be used to

make or receive calls.

Other handsets can

still make and receive

calls.

1) Press menu/clear and select DirectLink Mode menu.

6QꢀGPVGT

&KTGEV.KPMꢀOQFG

RTGUUꢀ=5'.'%6?

To enter DirectLink mode press [SELECT] appears.

2) Press select/ /audio tone to enter DirectLink mode.

You will hear a confirmation tone, and ^DirectLink

Mode ^Completeappears.

3) To return to normal standby mode (cancel direct

link), press menu/clear and then

select/ /audio tone, or return the handset to the

cradle.

w w w . u n i d e n . c o m

M U L T I - H A N D S E T F E A T U R E S [ 6 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

DirectLink call

1) When the phone is in DirectLink standby mode, press

ꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#

ꢀꢀꢀ*CPFUGVꢀꢅꢁ

&KTGEV.KPMꢀ/QFG

talk/flash (example of DirectLink from handset #1).

2) Select the handset to which you wish to DirectLink

with by pressing the number keys (1-4). Your

handset will then page the other handset.

6Qꢀ&KTGEV.KPM

CꢀJCPFUGV

RTGUUꢀ=ꢁꢂꢃ?

3) On the receiving handset, press talk/flash, or if Any

Key Answer is on, press any number key, /tone/

&KTGEV.KPM

ꢀꢀꢁ*CPFUGVꢁꢂꢃ

or #/

4) When you finish your conversation, press end on

either handset. Return the handset to the cradle, or press menu/clear, and then

select/ /audio tone to return to normal standby mode (canceling DirectLink

mode).

[ 6 3 ] M U L T I - H A N D S E T F E A T U R E S

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Intercom

The intercom feature lets you communicate with another handset without using the

phone line.

note

•If the party is busy,

the handset returns to

standby mode.

Making an Intercom Page

1) With the phone in standby mode, press hold/transfer/int’com.

•If the party is out of

range, "^Unavailable"

appears in the display,

and the operation will be

canceled.

2) Use /vol/∧ or /vol/∨ to select the handset you

6QꢀKPVGTEQO

ꢀ*CPFUGVꢀꢀꢀꢀꢁꢂ

ꢀ*CPFUGVꢀꢀꢀꢀꢁꢃ

want to talk with, and then press

select/ /audio tone. If you select All, all other

handsets will be paged. An intercom tone sounds.

•If you receive an

To cancel intercom, press end.

outside/intercom call

or page while selecting

the other handset, the

operation is canceled.

Answering an Intercom Page

When the intercom page tone sounds, the display will show the ID of the handset

that is paging.

•If you do not select a

handset within 30

seconds, the operation

will be canceled.

1) Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will

automatically answers when you pick it up.)

•If the party does not

answer within one

minute, the operation

is canceled.

2) Press talk/flash or hold/transfer/int’com. (If Any Key Answer is enabled, press

a number key, /tone/ , or #/ to answer the page.)

To hang up an intercom page, press end on either handset or return the handset to

the cradle.

w w w . u n i d e n . c o m

M U L T I - H A N D S E T F E A T U R E S [ 6 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Transfer Feature

The call transfer feature allows you to transfer a call between two handsets.

note

1) During a call, press hold/transfer/int’com.

2) Use /vol/∧ or /vol/∨ to select the handset you

•If all handsets are

paged, only the first

party to answer the

page will connect.

*QNFꢀVQꢁVTCPUHGT

ꢁ*CPFUGVꢁꢁꢁꢁꢂꢃ

ꢁ*CPFUGVꢁꢁꢁꢁꢂꢄ

want to transfer the call to, then press

select/ /audio tone.

The call will automatically be placed on hold, and a

•If you do not select a

handset within ten

seconds, the operation

will be canceled.

paging tone sounds.

To cancel the transfer, press talk/flash or

on the initiating handset.

Answering a Call Transfer Page

When the page tone sounds, the display will show the ID of the handset that is

transferring the call.

1) Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will

automatically answers when you pick it up.)

2) Press talk/flash or intcom/hold. (If Any Key Answer is enabled, press a number

key, /tone/ , or #/ to answer the page.)

Accepting the call transfer

After answering the page, if you want to accept the call and speak to the outside

caller, press talk/flash.

[ 6 5 ] M U L T I - H A N D S E T F E A T U R E S

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Room/Baby Monitor

This feature allows you to monitor sounds in

another room. Place a handset in the room

you wish to monitor; it will function as a

microphone. A second handset can be set to

function as a remote speaker, allowing you to

monitor sounds in the room.

note

•This feature only works

when both handsets

are within the range of

the base.

•If the party is out of

range, ^Unavailable

appears in the display,

and the operation will

be canceled.

Using Room/Baby Monitor

1) Press menu/clear and enter the Room

Monitor menu. ^Listento; appears.

2) Select the handset you want to monitor by

using /vol/∧ or /vol/∨.

3) Press select/ /audio tone.

RoomMonitor appears, and you hear sounds

in the room where the handset is

installed.

•While a pair of

handsets are in Room/

Baby Monitor mode,

they cannot be used to

make or receive calls.

Other handsets can

still make and receive

calls.

&KTGEV.KPMꢀ/QFG

4QQOꢀ/QPKVQT

*CPFUGVꢀ5GVWR

4) To turn off the Room Monitor, press end or

return the handset to the cradle.

w w w . u n i d e n . c o m

M U L T I - H A N D S E T F E A T U R E S [ 6 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Note on Power Sources

Power Failure

During the period that the power is off you will not be able to make or receive calls

with the telephone.

Battery replacement and handling

When the operating time becomes short, even after the battery is recharged, please

replace the battery. With normal usage, your battery should last about one year.

Please contact your place of purchase or the Uniden Parts Department for a

replacement battery.

Warning

To avoid the risk of personal injury or property damage from fire or electrical shock,

only use the Uniden battery model and Uniden adapter model specifically

designated for this product.

Caution

•

Use only the specified Uniden battery pack (BT-446).

Do not remove the batteries from the handset to charge them.

Never throw the battery into a fire, disassemble them, or heat them.

Do not remove or damage the battery casing.

[ 6 7 ] A D D I T I O N A L I N F O R M A T I O N

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Low battery alert

When the battery pack is very low, the phone is programmed to eliminate functions

in order to save power.

note

The battery pack needs to be charged when:

Even when the battery

pack is not being used,

it will gradually

discharge over a long

period of time.

For optimum performance,

be sure to return the

handset to the cradle after

each telephone call.

- The empty battery icon appears.

ꢀꢀ.QYꢀ$CVVGT[

Low Battery appears in the display.

If the phone is in standby mode, none of keys will

operate. If you are on a call, complete your

conversation as quickly as possible, and return the handset to the cradle.

Cleaning the battery charging contacts

To maintain a good charge, clean the charging contacts on the handset once a

month. Dampen a cloth with plain water. Gently rub the damp cloth over the

charging contacts until all visible dirt is removed.

Dry the contacts thoroughly before returning the

handset to the cradle.

Caution: Do not use paint thinner, benzene,

alcohol, or other chemical products. Doing so may

discolor the surface of the telephone and damage

the finish.

w w w . u n i d e n . c o m

A D D I T I O N A L I N F O R M A T I O N [ 6 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

General Information

The phone complies with FCC Parts 15 and 68. Operating temperature:

0 °C to +50 °C (+32 °F to +122 °F)

AC Adapter Information

AC Adapter part number: AD-800

Input Voltage: 120V AC 60Hz

Output Voltage: 9V DC 350mA

AD-0005 for the charger (DCT748-2 only)

120V AC 60Hz

9V DC 120mA

Battery Information

Battery part number: BT-446

Capacity: 800mAh, 3.6V

•To avoid damage to the phone use only Uniden AD-800 and AD-0005, and BT-446 with

your phone.

•If the handset is left off of the base, the actual Talk mode duration will be reduced

respective to the amount of time the handset is off the cradle.

Recharge your phone on a regular basis by returning the handset to the cradle after

each phone call. When the operating time becomes short even after the battery is

recharged, please replace the battery. With normal usage, the battery should last

about one year.

A replacement Uniden adapter or battery may be purchased by contacting the

Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m.

Central Time, Monday through Friday, or www.uniden.com.

Specifications, features, and availability of optional accessories are all subject to

change without prior notice.

[ 6 9 ] A D D I T I O N A L I N F O R M A T I O N

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

Suggestion

• Make sure the AC adapter is plugged into the base or the charger (if you have more than one

handset) and wall outlet.

• Make sure the handset is properly seated in the cradle.

• Make sure the charging contacts on the handset are clean.

The charge LED won't illuminate

when the handset is placed in

the cradle.

• Move the handset and/or base away from metal objects or appliances and try again.

• Make sure that you are not too far from the base.

The audio sounds weak.

• Make sure that you are not too far from the base.

• Make sure the line is not in use. If an out call is already using a line, you cannot use that line to

make another outside call.

Can't make or receive calls.

• Check both ends of the base telephone line cord.

• Make sure the AC adapter is plugged into the base and wall outlet.

• Disconnect the AC adapter for a few minutes, and then reconnect it.

• Change the Digital Security Code (see page 15).

• Make sure that you are not too far from the base.

• Charge the batteries in the handset for 15-20 hours by placing the handset on the base or

charging cradle.

The handset doesn't ring or

receive a page.

• Change the Digital Security Code (see page 15).

• Keep the handset away from microwave ovens, computers, remote control toys, wireless

microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical

appliances.

Severe noise interference.

• Move to another location or turn off the source of interference.

w w w . u n i d e n . c o m

T R O U B L E S H O O T I N G [ 7 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Suggestion

• The call was placed through a switchboard.

The Caller ID does not display.

• Call your local telephone company to verify your Caller ID service is current. There may be a

problem with your Caller ID service.

You cannot register the handset • Charge the battery pack for 15-20 hours.

at the base.

• Change the Digital Security Code (see page 15).

The handset doesn't

communicate with other

handsets.

• Change the Digital Security Code (see page 15).

• Make sure that you have registered all handsets.

An extra handset can't join

the conversation.

• Make sure there are not 2 handsets already using the conference feature.

• Make sure that another handset is not in privacy mode.

Room Monitor feature does not

work.

• Make sure to place the handset(s) within the range of the base.

•Make sure the base unit is plugged in.

•Make sure that the answering system is turned on.

•Make sure that the message record time is not set to Announce only (see page 50).

The answering system does not

work.

Messages are incomplete.

•The incoming messages may be too long.

Remind callers to leave a brief

message.

•The memory maybe full. Delete some or all of the saved message.

No sound on the base unit or

haneset speaker during call

monitoring or message playback.

•Adjust the speaker volume on the base unit or handset.

•Make sure the call screen feature is set to on.

Cannot access remote call-in

•Make sure you are using the correct PIN number.

features from another touchtone •Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds.

phone.

If it cannot, you may have to use another phone to access your phone.

Time stamp cannot be heard.

•Make sure you have set the time (see "Setting Day and Time" on page 22).

[ 7 1 ] T R O U B L E S H O O T I N G

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

Case

Action

If the handset or base is exposed to

moisture or liquid, but only affects the

exterior plastic housing.

Wipe off the liquid, and use as normal.

If moisture or liquid has entered the

Handset:

plastic-housing (i.e. liquid can be heard 1)Remove the battery cover and leave it off for ventilation.

in the phone or liquid has entered the

handset battery compartment or vent

openings on the base).

2)Remove the battery pack by disconnecting.

3)Leave the battery cover off and the battery pack disconnected for at least 3 days.

4)Once the handset is completely dry, reconnect the battery pack and the battery cover.

5)Recharge the handset's battery pack for 20 hours before using again.

Base:

1)Disconnect the AC adapter from the base unit, cutting off electrical power.

2)Disconnect the telephone cord from the base unit.

3)Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery packs to

avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent

damage to the handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work, please send to:

Uniden America Corporation

Parts and Service Division

4700 Amon Carter Blvd.

Ft. Worth TX 76155

1-800-554-3988. Monday through Friday

8 a.m. to 5 p.m. CST

w w w . u n i d e n . c o m

T R O U B L E S H O O T I N G [ 7 2 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation. To protect the product from overheating,

these openings must not be blocked or covered.

This product should never be placed near or over a radiator or heat

unless proper ventilation is provided.

7. This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your dealer or local power

company.

8. Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be damaged by persons walking on it.

9. Do not overload wall outlets and extension cords, as this can result in

the risk of fire or electrical shock.

10.Never push objects of any kind into this product through cabinet

slots, as they may touch dangerous voltage points or short out parts

that could result in a risk of fire or electric shock. Never spill liquid of

any kind on the product.

11.To reduce the risk of electric shock, do not disassemble this product.

Take it to qualified service personnel when service or repair work is

required. Opening or removing covers may expose you to dangerous

voltages or other risks. Incorrect reassembly can cause electric shock

when the appliance is subsequently used.

12.Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A. When the power supply cord is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally when following the

operating instructions. (Adjust only those controls that are

covered by the operating instructions. Improper adjustment of

other controls may result in damage and will often require

extensive repair work by a qualified technician.)

5. Charge the battery pack provided with or identified for use with this

product only in accordance with the instructions and limitations

specified in the owners manual provided for this product.

6. Observe proper polarity orientation between the battery pack and

battery charger.

7. Batteries must be disconnected and removed from the product before

shipment to prevent accidental operation during transport. Any

batteries transported with the product must be separately secured

and cushioned with any exposed terminals covered to prevent their

breakage, leakage, movement within the packaging, or short circuits.

Failure to follow these recommendations for shipment may result in

serious damage and/or personal injury during transport and may be

against the U.S. Department of Transportation (DOT), International

Civil Aviation Administration (ICAO), International Air Transport

Association (IATA), and/or the International Maritime Organization

(IMO) regulations.

Precautions!

Before you read anything else, please observe the following:

Warning!

Uniden America Corporation DOES NOT represent this unit to be

waterproof. To reduce the risk of fire, electrical shock, or damage to the

unit, DO NOT expose this unit to rain or moisture.

Rechargeable Nickel-Metal-Hydride Battery Warning

• This equipment contains a rechargeable Nickel-Metal-Hydride battery.

• Nickel is a chemical known to state of California to cause cancer.

• The rechargeable Nickel-Metal-Hydride battery contained in this

equipment may explode if disposed of in a fire.

• Do not short-circuit the battery.

• Do not charge the rechargeable Nickel-Metal-Hydride battery used in

this equipment in any charger other than the one designed to charge

this battery as specified in the owner's manual. Using another charger

may damage the battery or cause the battery to explode.

Important El^Se^Ac^VEtr^THic^ESa^El^INC^STo^Rn^UCs^TIi^Od^Ne^S!rations

Unplug all electrical appliances when you know an electrical storm is

approaching. Lightning can pass through your household wiringand

damage any device connected to it. This phone is no exception.

Rechargeable Nickel-Metal-Hydride

Batteries Must Be Recycled or

Disposed of Properly

The FCC Wants You To Know

Changes or modifications to this product not expressly approved by

Uniden, or operation of this product in any way other than as detailed by

the owner's manual, could void your authority to operate this product.

Your telephone complies with Part 68 of FCC Rules. You

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

must, upon request, provide the FCC registration number and the REN to

your telephone company. Both numbers are on the base unit.

Note: You must not connect your phone to:

• coin-operated systems

• most electronic key telephone systems

E. If the product has been dropped or the cabinet has been

damaged.

F. If the product exhibits a distinct change in performance.

13.Do not use the telephone to report a gas leak in the vicinity of the

leak.

Uniden works to reduce lead content in our PVC coated cords in our

products and accessories.

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation. Privacy of

communications, may not be ensured when using this phone.

Warning!

The cords on this product and/or accessories contain lead, a chemical

known to the State of California to cause birth defects or other

reproductive harm. Wash hands after handling.

Additional Battery Safety Precautions

Caution! To reduce the risk of fire or injury to persons by the battery,

read and follow these instructions:

1. Use only the Uniden battery pack specified in the owner's manual.

2. Do not dispose of the battery pack in a fire. The cell may explode.

Check the Nickel Metal Hydride battery disposal package insert for

disposal instructions.

3. Do not open or mutilate the battery pack. Released electrolyte is

corrosive and may cause damage to the eyes or skin. It may be toxic

if swallowed.

Range

Important Safety Instructions

Your new phone is designed to achieve the maximum possible range by

transmitting and receiving according to the highest specifications set

forth by the FCC. We have rated this phone to operate at a maximum

distance with the qualification that the range depends upon the

environment in which the telephone is used. Many factors limit range,

and it would be impossible to include all the variables in our rating. The

Maximum Range rating of this phone is meant to be used as a means of

comparison against other range claims.

When using your telephone equipment, these basic safety precautions

should always be followed to reduce the risk of fire, electrical shock, and

injury to persons:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Use a dry

cloth for cleaning without liquid or aerosol cleaners.

4. Do not use this product near water; for example, near a bathtub, wash

bowl, kitchen sink or laundry tub, in a wet basement, or near a

swimming pool.

4. Exercise care in handling the battery in order not to short the battery

with conducting materials such as rings, bracelets, and keys. The

battery or conductor may overheat and cause burns.

Telephone Line Problems

5. Do not place this product on an unstable cart, stand, or table.

The telephone may fall, causing serious damage to the unit.

The FCC has granted the telephone company the right to disconnect

service in the event that your phone causes problems on the telephone

[ 7 3 ] P R E C A U T I O N S & W A R R A N T Y

Download from Www.Somanuals.com. All Manuals Search And Download.

w w w . u n i d e n . c o m

line. Also, the telephone company may make changes in facilities and

services which may affect the operation of your unit. However, your

telephone company must give adequate notice in writing prior to such

actions to allow you time for making necessary arrangements to continue

uninterrupted service. If you are having trouble with your telephone

service, you must first disconnect your phone to determine if it is the

cause of your problem. If you determine that it is the cause, you must

leave it disconnected until the trouble has been corrected.

Installation Considerations

Selecting a Location

One Year Limited Warranty

Important: Evidence of original purchase is required for warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF

WARRANTY: Uniden warrants, for one year, to the original retail owner,

this Uniden Product to be free from defects in materials and

Before choosing a location for your new phone, there are some important

guidelines you should consider:

• The location should be close to both a phone jack and continuous

power outlet. (A continuous power outlet is an AC outlet which does

not have a switch to interrupt its power.)

• Keep the base and handset away from sources of electrical noise such

as motors or fluorescent lighting.

• Be sure there is sufficient space to fully extend the base antenna.

• The base can be placed on a desk or tabletop or mounted on a standard

telephone wall plate.

• You should charge your new phone for 15-20 hours before completing

the installation or using the handset.

craftsmanship with only the limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original user shall terminate

and be of no further effect 12 months after the date of original retail

sale. The warranty is invalid if the Product is

Radio Interference

Radio interference may occasionally cause buzzing and humming in your

cordless handset, or clicking noises in the base. This interference is

caused by external sources such as TV, refrigerator, vacuum cleaner,

fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If

these noises continue and are too distracting, please check around your

home to see what appliances may be causing the problem. In addition,

we recommend that the base not be plugged into a circuit that also

powers a major appliance because of the potential for interference. Be

certain that the antenna on the unit is fully extended when needed.

In the unlikely event that you consistently hear other voices or

distracting transmissions on your phone, you may be receiving radio

signals from another cordless telephone or other source of interference.

If you cannot eliminate this type of interference, you need to change to

a different channel.

(A) damaged or not maintained as reasonable or necessary, (B) modified,

altered, or used as part of any conversion kits, subassemblies, or any

configurations not sold by Uniden, (C) improperly installed, (D) serviced

or repaired by someone other than an authorized Uniden service center

for a defect or malfunction covered by this warranty, (E) used in any

conjunction with equipment or parts or as part of any system not

manufactured by Uniden, or (F) installed or programmed by anyone other

than as detailed by the owner's manual for this product.

Telephone Line Outlets

There are two types of phone outlets:

Modular Jack

Most phone equipment available now uses modular jacks. Phone cords are

fitted with a molded plastic connector which plugs into this type of jack.

If you do not have modular phone jacks, contact your local telephone

company for information about their installation.

STATEMENT OF REMEDY: In the event that the product does not conform

to this warranty at any time while this warranty is in effect, warrantor

will either, at its option, repair or replace the defective unit and return it

to you without charge for parts, service, or any other cost (except

shipping and handling) incurred by warrantor or its representatives in

connection with the performance of this warranty. Warrantor, at its

option, may replace the unit with a new or refurbished unit. THE LIMITED

WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY

PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL

OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,

IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT

LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR

PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or

limitation of incidental or consequential damages so the above limitation

or exclusion may not apply to you.

Hardwired Jack

Finally, it should be noted that some cordless telephones operate at

frequencies that may cause interference to nearby TVs and VCRs. To

minimize or prevent such interference, the base of the cordless

telephone should not be placed near or on top of a TV or VCR. If

interference is experienced, moving the cordless telephone farther away

from the TV or VCR will often reduce or eliminate the interference.

Some equipment is wired directly to a phone jack, and these types of

installations require a modular jack converter. This type of installation is

not difficult; however, you should contact your Uniden telephone dealer

or a telephone supply store for advice about the proper adapter or

converter for your particular situation.

Connecting the Telephone Cords

More than One Cordless Telephone

Consider these safety guidelines before connecting the telephone cords:

Caution!

If you want to use more than one cordless telephone in your home, they

must operate on different channels. Press the channel key to select a

channel that provides the clearest communication.

• Never install telephone wiring during a lightning storm.

• Never touch uninsulated telephone wires or terminals unless the

telephone line has been disconnected.

Cordless Telephone Privacy

• Use caution when installing or modifying telephone lines.

Cordless telephones are radio devices. Communications between the

handset and base of your cordless telephone are accomplished by means

of radio waves which are broadcast over the open airways.

LEGAL REMEDIES: This warranty gives you specific legal rights, and you

may also have other rights which vary from state to state. This warranty

is void outside the United States of America and Canada.

Applying Power to the Base

This phone requires an AC outlet, without a switch to interrupt power,

and the included AC adapter. To relieve strain on the DC plug when the

phone is placed on a desk or table, wrap the power cord around the

strain relief notch on the bottom of the base.

Because of the inherent physical properties of radio waves, your

communications can be received by radio receiving devices other than

your own cordless telephone unit. Consequently, any communications

using your cordless telephone may not be private.

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after

following the instructions in the owner's manual you are certain that the

Product is defective, pack the Product carefully (preferably in its original

packaging). Disconnect the battery from the Product and separately

secure the battery in its own separate packaging within the shipping

carton. The Product should include all parts and accessories originally

packaged with the Product. Include evidence of original purchase and a

note describing the defect that has caused you to return it. The Product

should be shipped freight prepaid, by traceable means, to warrantor at:

NOTE: Place the power cord so that it does not create a trip hazard, or

where it could become chafed and create a fire or other electrical

hazards.

Uniden America Corporation

Parts and Service Division

4700 Amon Carter Blvd.

Fort Worth, TX 76155

(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday

w w w . u n i d e n . c o m

P R E C A U T I O N S & W A R R A N T Y [ 7 4 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

I.C. Notice

TERMINAL EQUIPMENT

NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.

This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies

that registration was performed based on a Declaration of Conformity indicating that Industry Canada

technical specifications were met. It does not imply that Industry Canada approved the equipment.

NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The

REN assigned to each terminal equipment provides an indication of the maximum number of terminals

allowed to be connected to a telephone interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of

all the devices does not exceed five.

RADIO EQUIPMENT

The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were

met.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the device. "Privacy of

communications may not be ensured when using this telephone".

[ 7 5 ] I . C . N O T I C E

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Clarity Booster . . . . . . . . . . . . . . 33

Clock . . . . . . . . . . . . . . . . . . . . . 22

Conferencing. . . . . . . . . . . . . . . . 34

Deluxe Call Waiting Features . . . . . 44

De-register the Handset . . . . . . . . 25

Dial mode. . . . . . . . . . . . . . . . . . 24

Digital security code . . . . . . . . . . 15

DirectLink. . . . . . . . . . . . . . . . . . 62

Distinctive ringer. . . . . . . . . . . . . 19

E, G , H, I

Earpiece volume. . . . . . . . . . . . . . 30

Expanding your phone . . . . . . . . . 12

General information . . . . . . . . . . . 69

Hands-free conversation . . . . . . . . 26

Headset installation . . . . . . . . . . . 15

Hold . . . . . . . . . . . . . . . . . . . . . 28

I.C. notice . . . . . . . . . . . . . . . . . 75

Important safety instructions. . . . . 73

Intercom . . . . . . . . . . . . . . . . . . 64

K, L, M, N, O

Key touch tone . . . . . . . . . . . . . . 21

Language . . . . . . . . . . . . . . . . . . 21

Liquid damage. . . . . . . . . . . . . . . 72

Making a call. . . . . . . . . . . . . . . . 26

Mute . . . . . . . . . . . . . . . . . . . . . 31

New message LED. . . . . . . . . . . . . 54

Outgoing message . . . . . . . . . . . . 52

Making calls . . . . . . . . . . . . . . .40

Storing . . . . . . . . . . . . . . . . . .35

Viewing . . . . . . . . . . . . . . . . . .39

Precautions . . . . . . . . . . . . . . . . .73

Privacy Mode . . . . . . . . . . . . . . . .33

Receiving a call . . . . . . . . . . . . . .27

Redialing a call . . . . . . . . . . . . . .29

Remote. . . . . . . . . . . . . . . . . . . .58

Rem ote access

away from home . . . . . . . . . . . .60

from your handset. . . . . . . . . . .58

Ring options . . . . . . . . . . . . . . . .18

Ringer mute. . . . . . . . . . . . . . . . .31

Room/baby monitor . . . . . . . . . . .66

Index

Announce only feature. . . . . . . . . 53

Answering system

Deleting a message . . . . . . . . . 56

Playing your messages . . . . . . . 54

Recording a conversation . . . . . 57

Remote access. . . . . . . . . . . . . 58

Repeating a message . . . . . . . . 55

Skipping a message . . . . . . . . . 55

Turning On/Off . . . . . . . . . . . . 52

Anykey Answer . . . . . . . . . . . . . . 20

Area Code . . . . . . . . . . . . . . . . . 23

Audio Tone. . . . . . . . . . . . . . . . . 31

AutoTalk . . . . . . . . . . . . . . . . . . 19

Banner . . . . . . . . . . . . . . . . . . . 20

Battery

Preparing and charging. . . . . . . . 8

Replacement and handling. . . . . 67

Beltclip . . . . . . . . . . . . . . . . . . . 15

Setting up

base unit . . . . . . . . . . . . . . . . . 9

Handset. . . . . . . . . . . . . . . . . . 8

Menu options . . . . . . . . . . . . . .17

Telephone Line . . . . . . . . . . . . . 9

Speed dialing. . . . . . . . . . . . . . . .40

T, U, V, W, X, Y, Z

Call transfer feature. . . . . . . . . . . 65

Caller ID

Transferring a call. . . . . . . . . . . . .65

Troubleshooting . . . . . . . . . . . . . .70

Voice memo. . . . . . . . . . . . . . . . .60

Warranty . . . . . . . . . . . . . . . . . . .74

Call Waiting . . . . . . . . . . . . . . 28

Caller ID services . . . . . . . . . . . 43

Calling . . . . . . . . . . . . . . . . . . 47

CIDCW . . . . . . . . . . . . . . . . . . 43

CWDX . . . . . . . . . . . . . . . . . . . 44

Deleting . . . . . . . . . . . . . . . . . 46

Setting. . . . . . . . . . . . . . . . . . 23

Storing. . . . . . . . . . . . . . . . . . 38

Viewing . . . . . . . . . . . . . . . . . 45

Phonebook

Copying. . . . . . . . . . . . . . . . . . 42

Editing . . . . . . . . . . . . . . . . . . 41

Erasing . . . . . . . . . . . . . . . . . . 41

w w w . u n i d e n . c o m

I N D E X [ 7 6 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Memory List

Name

Phone No.

Name

Phone No.

Name

Phone No.

100

[ 7 7 ] M E M O R Y L I S T

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

w w w . u n i d e n . c o m

[ 7 8 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Memo

[ 7 9 ]

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Operation Card

C U T

REMOTE OPERATION CARD

Remote access away from

home

Turn on the answering

system remotely

Remote access away from

home

Turn on the answering

system remotely

1. Call your phone number from a

touch-tone phone.

1. Call your phone and let it ring

10 times until you hear a beep.

2. Press 0 and then enter your

PIN code.

3. Press 0 then 5 to stop

the announcement.

1. Call your phone number from a

touch-tone phone.

1. Call your phone and let it ring

10 times until you hear a beep.

2. Press 0 and then enter your

PIN code.

3. Press 0 then 5 to stop

the announcement.

2. During the outgoing message,

press 0 and enter your PIN code.

The answering system announces

the number of messages stored in

memory and the voice prompts.

3. To quit, hang up the phone.

2. During the outgoing message,

press 0 and enter your PIN code.

The answering system announces

the number of messages stored in

memory and the voice prompts.

3. To quit, hang up the phone.

4. Press 0 then 6 to turn the

answering system on.

4. Press 0 then 6 to turn the

answering system on.

C U T

REMOTE OPERATION CARD

Remote access away from

home

Turn on the answering

system remotely

Remote access away from

home

Turn on the answering

system remotely

1. Call your phone number from a

touch-tone phone.

1. Call your phone and let it ring

10 times until you hear a beep.

2. Press 0 and then enter your

PIN code.

3. Press 0 then 5 to stop

the announcement.

1. Call your phone number from a

touch-tone phone.

1. Call your phone and let it ring

10 times until you hear a beep.

2. Press 0 and then enter your

PIN code.

3. Press 0 then 5 to stop

the announcement.

2. During the outgoing message,

press 0 and enter your PIN code.

The answering system announces

the number of messages stored in

memory and the voice prompts.

3. To quit, hang up the phone.

2. During the outgoing message,

press 0 and enter your PIN code.

The answering system announces

the number of messages stored in

memory and the voice prompts.

3. To quit, hang up the phone.

4. Press 0 then 6 to turn the

answering system on.

4. Press 0 then 6 to turn the

answering system on.

w w w . u n i d e n . c o m

R E M O T E O P E R A T I O N C A R D [ 8 0 ]

Download from Www.Somanuals.com. All Manuals Search And Download.

C U T

Task

Repeat a Message

Key

Task

Repeat a Message

Key

Playing incoming Messages

Skipping a Message

Deleting a Message

Stop Operation

Playing incoming Messages

Skipping a Message

Deleting a Message

Stop Operation

Answering System On

Memo Record/Stop

Greeting Message Record/Stop

Answer System Off

Answering System On

Memo Record/Stop

Greeting Message Record/Stop

Answer System Off

Help Guidance

C U T

Task

Repeat a Message

Key

Task

Repeat a Message

Key

Playing incoming Messages

Skipping a Message

Deleting a Message

Stop Operation

Playing incoming Messages

Skipping a Message

Deleting a Message

Stop Operation

Answering System On

Memo Record/Stop

Greeting Message Record/Stop

Answer System Off

Help Guidance

Answering System On

Memo Record/Stop

Greeting Message Record/Stop

Answer System Off

Help Guidance

[ 8 1 ] R E M O T E O P E R A T I O N C A R D

w w w . u n i d e n . c o m

Download from Www.Somanuals.com. All Manuals Search And Download.

At Uniden, we'll take care of you!

If you need any assistance with this product, please call our Customer Hotline at

1-800-297-1023

PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.

Our Uniden representatives will be happy to help you with any matters regarding

the operation of this unit, available accessories, or any other related matters.

Thank you for purchasing a Uniden product.

Hours: Monday through Friday from 7:00 a.m. to 7:00 p.m.,

Saturday, Sunday, and holidays from 9:00 a.m. to 5:00 p.m.

www.uniden.com

For information on the accessibility features of this product, please call

1-800-874-9314 (V/TTY)

May be covered under one or more of the following U.S. patents:

4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905

5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790

5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312

5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152

5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227

5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082

6,125,277 6,253,088 6,314,278 6,418,209 6,618,015 6,671,315

Download from Www.Somanuals.com. All Manuals Search And Download.

THANK YOU FOR BUYING A UNIDEN PRODUCT.

UPZZ01343ZZ

Download from Www.Somanuals.com. All Manuals Search And Download.

Teac MP3 Docking Station SR 80i User Manual
The Eltron Company Printer P 2 0 5 User Manual
Tricity Bendix Oven E 750 User Manual
Tripp Lite Flat Panel Television DL510PC User Manual
Tripp Lite Power Supply 5kVA User Manual
Uniden Telephone 9035 User Manual
Venturer Flat Panel Television PLV76198E User Manual
Viking Outdoor Cart BQC030T3 User Manual
Weber Griddle Q Griddle User Manual
Weed Eater Lawn Mower 96114000409 User Manual