User’s
GUide
BT108 and BT109
Bluetooth® Headsets
Also in this package:
2 extra ear cushions AC (indoor) power DC (car) power adapter
adapter (BT109 only)
Questions? Problems?
Download from Www.Soormcaanlluoaulsr.cCoumst.oAmlleMr SaenruvailcseSlienaercaht 8A0n0d-2D9o2w-n2l2o9a4d..
What the LED colors mean
Color
State
Meaning
The headset is currently charging. When the
battery is fully charged, the LED turns off.
Steady
Red
Flashing
The battery is low.
Flashing
Slow flash (every 3 seconds)
Red & blue Alternating flash
The headset is turned on.
The headset is paired to a Bluetooth device.
The headset is in pairing mode.
Blue
Setting Up Your Headset
Charge the battery
Before using your headset, charge the battery for at least 8 hours.
Charging the battery completely (and keeping it charged) will help you
get the longest possible talk and standby time out of the battery.
Use ONLY the power adapter supplied with the headset! Using any other adapter
could damage your headset, create a fire hazard, or cause a risk of electric shock!
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
Charging the BT108
Charging the BT109
Connect the adapter to the power Connect either adapter to the power connector on the top of
connector on the top of the headset, the headset. Connect the AC adapter to a standard 120 volt
then plug it into a standard 120 volt AC (regular indoor) power outlet. Connect the DC adapter to
AC (regular indoor) power outlet.
a standard 12 volt DC (regular automobile) power outlet.
Pair the headset to your Bluetooth phone
Pairing is like “introducing”two Bluetooth devices and giving them
permission to connect to each other. If you want to use the headset with
more than one phone, you need to pair it with each phone separately.
Once a phone and the headset are paired, they can connect automatically
whenever they detect each other.
1. Make sure the headset is powered off and the power adapter is not
connected (you can’t use the headset while it’s charging).
ꢀ. Press and hold Power until the LED flashes alternating red and blue. The
headset is in pairing mode and should be visible to other Bluetooth
devices.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ. On your phone, start a search for Bluetooth headsets or handsfree
devices. (This process may take several seconds, and it will be different
for each phone; see your phone’s manual for detailed instructions.)
ꢂ. Your phone should discover a device called a BT108, BT108 headset,
BT109, or BT109 headset, When your phone asks if you want to pair with
this device, answer yes.
ꢃ. When your phone prompts you for a PIN code or password to pair with
the BT108 or BT109 enter 0000.
ꢄ. When the headset is paired, the LED turns blue and flashes every ꢁ
seconds. Your phone might display a confirmation message, also.
ꢅ. Your phone might ask if you want to change the headset’s name;
generally, you should only change the name if you have more than one
BT108 or BT109 headset that you use with this phone.
Connecting to your phone
Most phones connect to the headset as soon as you pair it; if yours won’t,
turn the headset off and back on. If headset still won’t connect, check
your phone’s owner’s manual for additional Bluetooth information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ
Once the headset is paired:
► Whenever you turn the headset on, it will automatically try to connect
to whatever device it was connected to last.
► If the headset loses the connection (e.g., if your phone is out of range),
it reconnects automatically. To manually reconnect, press Power.
► If the headset goes more than 1 hour with no connection, it
automatically turns off.
Using Your Headset
Put your headset on
Insert the ear cushion,
then wrap the earhook
behind your ear.
Place the
hook
behind
your
ear.
Everyone’s ear has a sweet
spot, a particular angle
of the speaker where the
audio comes in loud and
Put the
cushion in
your ear.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
clear. Take a few minutes to move the headset around until you find the
best angle for the ear cushion.
If you can’t find your sweet spot or if the cushion doesn’t fit comfortably
in your ear, change it to one of the other sizes that came with the headset.
Pull the cushion off gently and snap a new one on.
Wearing the
headset on
your left ear
If you want
to wear the
headset on
Hold the hook at the
bottom and gently lift
it over the speaker.
1
Slide it over the
speaker and
back into place.
3
your left
Flip the hook over so it
faces the other
direction.
2
ear, take the
earhook off
and turn it
over.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅ
Available Features
After the headset is connected, you can use the following features:
Just make the call from your mobile phone as usual; your phone should
Make a call
automatically send the call to the headset. If your phone doesn’t, press and hold
Power for 2 seconds to send the call to the headset manually.
Answer a call
Hang up
While the call is ringing, press Power.
Press Power.
Send a call back During a call, press and hold Power for 2 seconds. The headset sends the call to
to your phone. your phone and disconnects from the phone.
Reject an
incoming call
Press and hold Power for 2 seconds; when you hear a beep, release the button.
Redial the last
number
Press and hold Volume Down; when you hear 4 beeps, release the button.
With the phone in standby, press Power and release. When you hear a beep,
Activate voice
dialing
start using your phone’s voice commands. (Your phone must support voice
dialing, and all commands must be pre-programmed.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Muting the microphone
To mute the microphone so the caller can’t hear you, press and hold
both Volume Up and Volume Down for about one second. The headset beeps
periodically to remind you that the microphone is muted. Press and hold
the buttons again to turn the microphone back on.
Troubleshooting and Maintenance
If you have problems with the headset, see the suggestions in the table
below. If these suggestions don’t help, contact customer support (see the
cover for contact information).
If...
The headset won’t turn on. - Charging the battery completely.
- Making sure your phone is in pairing mode. Check your phone’s
Try...
manual for instructions on Bluetooth device pairing.
- Turning the headset off. Wait at least 10 seconds, then try again.
(See page 4 for pairing instructions.)
- Making sure your phone supports the Bluetooth Headset or Hands
Free Profile.
The headset won’t pair with
my phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
If...
Try...
The headset paired with
- Making sure the call connected and is still active.
my phone, but I can’t hear - Making sure the phone transferred the call to the headset. Press
and hold Power for two seconds to transfer the call.
anything through it.
- The battery may be getting low. If the LED is blinking red, charge
the battery.
- Seeing if your phone has lost the network signal. If your phone
sounds an alert when it can’t connect to the network, the headset
passes on this alert by beeping every 5 seconds.
The headset keeps beeping,
and I don’t know why.
- Turning the speaker volume up.
- Moving closer to your phone (if you aren’t carrying it).
- Adjusting the ear cushion to find your “sweet spot”(see page 6).
- Keeping the battery fully charged; As the battery starts to run out,
the speaker gets softer.
I can hear the caller, but the
audio is very weak or soft.
General Information
• You cannot use the headset while it is recharging.
• Bluetooth wireless devices have a maximum range of 30 feet (10 m); the actual range will vary
depending on current conditions (obstacles, battery power, interference, etc.).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
• The headset can be connected only to devices Noise or Static on the Headset
that support the Bluetooth headset or hands- The most common cause of noise or static on any
free profile. This product is not compatible with wireless device is interference. Bluetooth devices
standard cordless phones.
Battery life
operate in the ISM band (2.402 GHz ~ 2.480
GHz); any equipment operating in this frequency
range might interfere with the headset. Some
common sources of interference in this range are
• Equipment that uses microwaves, especially
microwave ovens
• Wireless LAN equipment or WiFi connections
• Other Bluetooth devices or computers
• Certain cordless telephones
• Certain medical equipment and appliances
If you have problems with static during calls,
look for one of these interference sources. Try
moving away from the suspected source.
With average use, the battery should provide
about 9 hours of talk time and 8 days of standby
time. A battery that is new or left unused for
long periods of time can have reduced capacity
the first few times it is used. For maximum
battery life, keep your battery charged.
• When the battery only has enough charge for
about 15 minutes of talk time, the headset
triggers a low battery alert: you’ll hear a
periodic beep, and the LED changed from blue
to red.
• When the battery no longer has enough charge
to operate the headset, the headset will power
off; you won’t be able to turn it back on until
you connect the charger or charge the battery.
If the noise continues, there may be interference
on your phone itself, and any noise in the
phone’s connection will come through on the
Download from Www.Somanuals.com. All Manuals Search And Download.
11
headset, too. Transfer the call to your phone and • Set the volume at the minimum level needed
see if the audio quality improves. If it doesn’t,
check around for things that might interfere
with your phone.
to hear in the current environment. If possible,
use your headset in quiet surroundings or try
to move to an area with less background noise
before adjusting the volume.
• Start with the volume at its lowest setting,
then gradually increase it until you can hear.
• Turn the volume down before powering off the
headset and readjust the volume each time
you turn it on.
Safety and Handling Information
For maximum product life, do not drop, throw, or
crush the headset. Do not expose it to humidity,
dust, or temperatures above 125 F.
Cleaning the headset
• If necessary, remove the ear cushion and
earhook. Dampen a lint-free cloth with water
or a cleaner specially designed for electronics,
and gently wipe the headset clean.
• Do not expose this product to liquid (water,
alcohol, etc.) or submerse in liquid for any
reason.
Avoiding hearing damage
Using any headset or earbud at too high a
volume can cause permanent hearing damage.
• If someone next to you can hear the other end
of the call through your headset or if your ears
hurt or ring when you hang up, the volume is
too high.
• The longer your ears are exposed to noise, the
greater the risk of damage. Limit calls at higher
volumes (or other exposure to loud noise).
• For more information on protecting your
an audiologist.
To reduce tDheowrisnklooafdhefraorimngWdawmwa.Sgeo:manuals.com. All Manuals Search And Download.
Important Safety Instructions
• Do not disassemble, modify, or attempt to
repair any component of this product.
Uniden America Corporation dOes NOT
represent this product to be waterproof. To
reduce the risk of fire, electrical shock, or
damage to the product, dO NOT expose this
product to rain or moisture.
• Check the laws and regulations on the use of
mobile phones and hands-free equipment
in the areas where you drive. Always give
full attention to driving and pull off the road
and park before making or answering a call if
driving conditions require.
• Do not allow children to play with your headset
since it contains small parts that could become
detached and create a choking hazard.
• Turn off your headset when pumping gas,
handling flammable materials, or in any area
with a risk of explosion. In rare occurrences,
this product could generate sparks which can
cause an explosion or fire. Follow all warning
notices in your immediate area!
When using the headset, always follow basic
safety precautions to reduce the risk of fire,
electric shock and injury to persons, including
the following:
• Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen
sink or laundry tub, in a wet basement or near
a swimming pool.
• Use only the power cord and batteries
indicated in this manual. Do not expose the
battery (or the device) to flames or dispose of
it in a fire: the battery may explode. Check with
local authorities for possible battery disposal
instructions.
SAVE THESE INSTRUCTIONS!
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Notice
Industry Canada statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation. Privacy of communications may not
be ensured when using this product.
This device complies with RSS-210 of the
Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device
may not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause undesired
operation.
IMPORTANT NOTE: Radiation Exposure
Statement
To insure the safety of users, the FCC has
established criteria for the amount of radio
frequency energy various products may produce
depending on their intended usage. This product
has been tested and found to comply with the
FCC’s exposure criteria. For body worn operation,
the FCC RF exposure guidelines were also met
when used with the Uniden accessories supplied
or designed for this product. Use of other
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment. End users must follow the specific
operating instructions for satisfying RF exposure
compliance. To maintain compliance with IC
RF exposure compliance requirements, please
follow operation instruction as documented in
this manual.
accessories may not ensure compliance with FCC
RF exposure guidelines and should be avoided.
Download from Www.Somanuals.com. All Manuals Search And Download.
Lithium-polymer battery information
sale. The warranty is invalid if the Product is a)
This device contains a lithium-polymer battery. damaged or not maintained as reasonable or
The headset and battery must be recycled or
disposed of properly. Contact your local waste
management office for information on battery
recycling or disposal.
necessary, b) modified, altered, or used as part
of any conversion kits, subassemblies, or any
configurations not sold by Uniden, c) improperly
installed, d) serviced or repaired by someone
other than an authorized Uniden service
center for a defect or malfunction covered by
this warranty, e) used in any conjunction with
equipment or parts or as part of any system
not manufactured by Uniden, or f) installed or
programmed by anyone other than as detailed
by the owner’s manual for this product.
Two-Year Limited Warranty
important: evidence of original purchase is
required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION
(“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants,
for two years, to the original retail owner,
this Uniden Product to be free from defects
in materials and craftsmanship with only the
limitations or exclusions set out below.
STATEMENT OF REMEDY: In the event that the
product does not conform to this warranty
at any time while this warranty is in effect,
warrantor will either, at its option, repair or
replace the defective unit and return it to you
without charge for parts, service, or any other
cost (except shipping and handling) incurred by
WARRANTY DURATION: This warranty to the
original user shall terminate and be of no further
effect 24DmoownnthlosaadftferrotmheWdawtwe o.Sf oomrigainnaularlest.aciol m. All Manuals Search And Download.
warrantor or its representatives in connection
with the performance of this warranty.
Warrantor, at its option, may replace the unit
with a new or refurbished unit.
other rights which vary from state to state. This
warranty is void outside the United States of
America and Canada.
THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY PERTAINING
TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY
NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
PROCEDURE FOR OBTAINING PERFORMANCE OF
WARRANTY: If, after following the instructions
in the owner’s manual you are certain that the
Product is defective, pack the Product carefully
(preferably in its original packaging). The
Product should include all parts and accessories
originally packaged with the Product. Include
WARRANTIES OF MERCHANTABILITY OR FITNESS evidence of original purchase and a note
FOR A PARTICULAR PURPOSE. THIS WARRANTY
DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states
do not allow this exclusion or limitation of
incidental or consequential damages so the
above limitation or exclusion may not apply to
you.
describing the defect that has caused you to
return it. The Product should be shipped freight
prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
LEGAL REMEDIES: This warranty gives you
specific legal rights, and you may also have
Download from Www.Somanuals.com. All Manuals Search And Download.
|
