007 Remote Wrist Watch
Advanced Digital Wrist Watch with Alarm and Remote Starter
Control Capabilities.
ULTRA
Warning!!
CARBON MONOXIDE MAY CAUSE SERIOUS INJURY, EVEN DEATH!
Itis
t
h
e
s
o
l
e
r
e
s
p
o
n
s
i
b
il
it
o
f
th
e
u
s
e
r
t
o
p
l
a
c
e
t
h
e
s
y
s
t
e
m
i
n
S
e
rv
i
c
e
ode
M
when parking a vehicle equipped with a remote starterin an enclosed
area ex: garage, partially enclosed area ex: carport, or when the vehicle is being serviced.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Real Time Mode- How to Set Time and Date Page 3
2 seconds
MODE
RESET
SU 12-16
SU 12-16
38
SU 12-16
TMR
P
TMR
P
P
38
38
12:38
18:38
12:38
ST.STP
ST.STP
1. Press and hold the MODE button to enter the Real Time Setting Mode.
2. Press the ST.STP button to select 12 or 24 hour format.
3. Press the RESET button to go to the next field, hour digits will begin to flash.
4. While the hour digits are flashing, press the ST.STP button to increase the
number. Hold the ST.STP button to change the number at a greater speed.
5. Aftter you set the 12/ 24 hour format, hour, minute, second, year, month and
date, press the MODE button to exit.
3. Dual Time Mode
ST.STP
A
12 1-38
SU 12-16
38
P
P
38
3:38
12:38
1. In real time mode, press the ST.STP button to switch between the Real Time
Mode and Digital Time Mode.
2.Set the Dual Time in the same manner as the Real Time.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Alarm Mode
Page 4
ST.STP
ALM
ALM
A
AL
AL
A
00
00
6:00
6:00
1. In real time mode, press the MODE button to enter the Alarm Mode.
ST.STP
2. Press the ST.STP button to set the alarm ON/OFF.
When the Bell Icon is displayed, the alarm will sound at the preset time every
day for 30 seconds.
-To stop the alarm, press any button.
If the alarm is ON, the Bell Icon will be turned ON in all other modes.
How to Set Alarm Time
2 seconds
MODE
RESET
ALM
ALM
ALM
A
AL
A
00
00
00
6:00
6:00
1. In real time mode, press the MODE button to enter Alarm Mode.
8:00
ST.STP
ST.STP
ST.STP
2. Hold the MODE button for 2 seconds, the hour digits will begin to flash.
3. While the hour digits are flashing, press the ST.STP button to increase the
number. Hold the ST.STP button to increase the digits at a greater speed.
4. Press RESET to enter the next field, minute digits will begin to flash.
5. To set the minute press the ST.STP button.
6. After you have set the minute, press the MODE button to exit and save.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Chronograph Mode
Page 5
ST.STP
CHR
A
CHR
53
01
00
00
0:00
0:01
ST.STP
RESET
CHR
53
TMR
08
0:08
1. In real time mode, press the MODE button to enter the Chronograph Mode.
2. Press the ST.STP button to start chrono. To stop the chrono, press the
ST.STP button.
When the chrono is stopped press the RESET button so reset the time to zero
When the chrono time is running, the “CHR” icon will begin to flash in all other
modes with the exception of Setting Modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Timer Mode
Page 6
ST.STP
RESET
TMR
TMR
TMR
00
00
58
00:18
0:00
00:20
1. In real time mode, press the MODE button 3 times to enter Timer Mode.
2. Press the ST.STP button to start the timer. To stop, press the ST.STP again.
If the timer is stopped, press RESET to reset the time to the present value.
When the timer is running, the TMR Icon flashes in all other modes with the
exception of setting modes.
3. Press the MODE button to exit.
How to Set the Timer
2 seconds
MODE
RESET
TMR
TMR
TMR
00
00
00
00:00
00:00
1. In real time mode, press the MODE button to enter the Timer Mode.
6:00
ST.STP
ST.STP
2. Hold the MODE button for 2 seconds, the hour digits will begin flashing.
3. While the hour digits are flashing press the ST.STP button to increase the
number. Hold the ST.STP button to increase the number at a greater speed.
4. Press RESET to go to the next field, minute and seconds will begin flashing.
5. After you have set the minute and seconds , press the MODE button to save
and exit
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Program Start Mode
Page 7
ST.STP
MODE
PRO
PRO
A
A
A
PS 6-20
PS 6-20
SU 5-16
P
P
38
1. In real time mode, press the MODE button 4 times to enter the Program Start
38
38
12:38
12:38
12:38
mode.
2. Press the ST.STP button to change the ON/OFF function of the Program Start.
When the “PRO” icon is ON, the engine will start and run at the preset time. The
remote will beep three times to confirm starting of the engine. The remote start
will only activate when the system is armed and within RF operating range.
3. Press the MODE button to exit.
How to Set the Engine Start
2 seconds
MODE
RESET
PRO
PRO
P
A
A
A
PS 6-20
PS 6-20
PS 8-20
TMR
P
TMR
P
TMR
38
ST.STP
38
38
12:38
ST.STP
12:38
12:38
1. Press the MODE button to enter the Program Start Mode.
2. Hold the MODE button for 2 seconds, the hour digits will start flashing.
3. While the digits are flashing, press the ST.STP button to increase the number.
Hold down the ST.STP button to change the number at a greater speed.
4. To set the minute, press the RESET button.
5. After you set the hours and minutes, press the MODE button to exit and save.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Mode For Vehicles
Page 8
Button 1
Button 2
Disarm/ Unlock- Press and release
Trunk Release- Press and hold for
2 seconds.
Arm/ Lock- Press and release.
Panic Mode- Press and hold for
2 seconds.
Light Button
Remote Start- Press and release
Remote Stop- Press and hold for
2 seconds.
Program Start On
Low Battery
ST.STP Button
Alarm On
MODE Button
Light Button
Reset Button
Button 2
Button 1
Battery Replacement
Change the battery when the Low battery icon is displayed on the LCD screen.
Replace with Lithium CR2032 Battery.
*To avoid possible water damage, have the battery changed professionally.
Caution
DO NOT DISASSEMBLE THIS WATCH FOR ANY OTHER REASON THEN TO
REPLACE THE BATTERY. REMOVING ANY OTHER COMPONENT(S) WILL
VOID THE WARRANTY.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance voids the
users authority to operate this device.
Download from Www.Somanuals.com. All Manuals Search And Download.
|