®
w w w . k o c o m . c o . k r
User’s Manual
This User s Manual describes
the correct use of KOCOM
DIGITAL CAMERA KDC330.
Please read carefully all
instructions in this User s
Manual before using the
camera.
®2003 KOCOM Co ., Ltd . All rig hts re se rve d . Ule a d Lo g o is a re g iste re d tra d e m a rk o f Ule a d .
Mic ro so ft, Wind o ws a nd the Wind o ws lo g o a re re g iste re d tra d e m a rks o f Mic ro so ft Co rp o ra tio n.
All o the r tra d e m a rks a re the p ro p e rty o f the ir re sp e c tive o wne rs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Before Using the Camera
Wa rra nty Tim e Pe rio d
Kocom Warrants this camera to be free from malfunctions and defects in both materials and
Thank you for purchasing KOCOM Digital Camera KDC330. This product is a 3.34
mega-pixel digital camera with a high-performance 1.6-inch color LCD monitor. You
can capture desired images freely and easily with this digital camera, and view still
images and moving images captured from a computer by using USB cables.
Through the use of software in the CD-ROM, store, process and edit still images and
moving images and enjoy video conference.
workmanship for one year from the date of purchase.
Wa rra nty Re p a ir C o ve ra g e
This product is manufactured through rigid quality control and test processes.
In case this product is defective, it will be replaced or repaired free of charge for one year
after purchasing date.
* Before using the camera, please read this User°Øs Manual carefully.
In case of the following, KOCOM will replace or fix the camera at the customers cost, even
though it is still under warranty.
(a) Mishandled by user.
Notes
(b) Damaged by modification of inner part or wrong repair.
(c) Natural disaster or disorder in power source.
(d) Case of omission, correction without confirmation, or loss of warranty card.
Keep the warranty card in a safe place.
●We recommend using a chargeable battery (Nickel hydrogen battery) in KDC-330.
●Usable batteries in KDC-330
- Chargeable (Nickel hydrogen battery) battery: AA size
- Lithium battery: 3V digital camera-only battery
* Recommended to use a nickel battery and 2 lithium batteries when using
a disposable battery
Will not be reissued in case of loss.
Present the warranty card for after service.
1 year from the date of
WARRANTY TIME PERIOD
purchase
MODEL
KDC-330
20
.
.
DATE OF PURCHASE
- Nickel battery: AA size (Basically 2 batteries are provided)
- Alkaline battery: AA size
ADDRESS
PHONE
NAME
- Usable for about 20 minutes
- 10 minutes more may be used, although battery capacity indicator flickers
(Flash capturing cannot be used).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Features of KDC330
Contents
● Superb high quality images of 3.34 mega pixel
1
●Safety caution
8
9
9
● mages up to 2040x1530 pixel resolution
Cautions
●Caution when using the camera
● High performance 1.6-inch color LCD monitor
●Caution when taking pictures
● CompactFlash? memory card, easy data transmission and storage
● 6X zoom capture (optical 3x/digital 2x)
●Name of Each Part
10
12
12
13
13
15
16
17
17
2
● Using The Manipulation Button
●KDC330 Camera & Accessories
●Attaching The Strap
● Various capture functions such as moving images capture (movies),
self-timer movies capture and convenient operation
Before using the
camera
● USB connection enabling simple and high-speed transmission of image data
(using enclosed cables)
●Loading The Batteries
●Batteries
● Various software such as world°Øs best selling photo software of Ulead Photo
Express and Ulead Photo Explorer
●Inserting a memory card
●Removing a memory card
●Utilizing a memory card
18
18
19
●Switching On and Off
System Specifications (Figure Omitted)
3
●Setting The Date and Time
●C/F Card Format
Getting started
Windows�
Windows�
Windows�
Windows�
∙Pentium MMX 200MHz or higher recommended
∙32MB RAM or higher ∙ Available USB Port
∙4x CD-ROM Driver
20
20
●Checking Battery Capacity Indication
●Checking Available Memory
98
SE/ME 2000
XP
�
Copyright 2002 Kocom Co., Ltd. All rights reserved.
●Basic capture
21
22
23
25
Kocom-I is the registered trademark of Kocom Co., Ltd. Microsoft, Windows and Windows logo
are the registered trademarks of Microsoft Corporation. All other trademarks are the property of
their respective owners.
4
●Short-distance capture (macro)
●Flash Setting (Dark Place Capture)
●Self-timer
Basic capture
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
●Setting Basic Playback Mode
●Picture Playback
●Zoom In
54
54
55
9
●Connection to Computers
●Printing (DPOF)
26
26
27
28
28
Connection to
External
5
Playback
●Connecting to TV
Equipment
●Viewing with Multi 6 screens
●DPOF
●Functions of USB Mass Storage
●Description of the Function of
USB Mass Storage
56
56
10
Use of software
●Delete pictures
6
29
30
30
Delete
●Delete all
●Installing Bundle Software
●Downloading Pictures from the Camera
58
66
●Cancellation of Protect Setting
●Still Automatic Capture Mode
- Basic Capture
- Menu Setup
31
31
11
●Camera specifications
68
7
Specifications
32
35
35
36
40
40
41
Application
(Setting by
modes)
●Still Manual Capture Mode
- Basic Capture
- Menu Setup
● Still Continuous Capture Mode
- Basic Capture
- Menu Setup
44
45
45
47
47
47
48
●Motion (movie) capture mode
- Basic playback
- Menu setup
●Playback mode
- Basic playback
- Slide show
- Menu setup
●Sidelight Method
●EV Setting
51
51
52
53
53
8
Details of each
function
●ISO Setting
●White Balance
●Focus
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6
●Do not put excessive weight on the body, switch, lens or cable of KDC330.
●Do not rebuild or disassemble on your own. High voltage and electric
shock may occur.
Ca utions
●Inadequate use of battery may cause liquid leakage, heat, fire or explosion. Make
sure to comply with the cautions.
Safety caution
● Be careful while wearing the camera strap or the USB cable around your neck.
● Do not use the optical viewfinder to look directly at the sun or any source of
intense light.
●When liquid leaks from the battery, clean the battery compartment and insert
a new battery.
●When the battery liquid has contacted your hands or clothes, you should clean
them out. You can lose your vision, if the battery liquid goes into your eyes.
●Do not use organic solvents such as thinner or benzene on to KDC330.
●Taking a picture of a person without permission may violate the person's right.
So, do not make the picture public or distribute it without the concerned
person's permission.
● Do not put the camera in a place under intense direct light or in the sealed car
during the summer. The image sensor may be discolored and deteriorated, if you
l eave the lens towards a direct sunlight for a long period of time.
●Since children may put the battery in their mouth, it could be harmful to their
health. Do not place your KDC330 in a place where infants under the age of 3
can reach it.
●In the event that the liquid of the battery comes in contact with your eyes, you
should wash your eyes with clear water and consult your physician. When the l
eaked battery liquid is in contact with your skin or clothes, you should wash it out.
●Do not use the flash at a close distance from a person. If shot close to
somebody°Øs eyes, non-recoverable vision damage may occur. Do not take a
picture within a meter from an infant.
Caution when taking pictures
●The pictures taken under the fluorescent tube many have yellow stripes.
● When the background and subject are too dark, take a picture in flash setting
mode, but use the camera in a bright place, if possible (Luminous intensity of 50
Lux or more).
Caution when using the camera
●Do not use or store your KDC330 in places with high temperature and humidity,
highly volatile temperature and humidity, direct sunlight, a lot of sand and dust
(beach), great black dirt or water vapor (kitchen sink and bathroom), fire-
generating equipment and explosives and in the places close to air conditioners or
heaters and hydrators. Fire, shock and failures may occur.
●The picture may be blurry if you use a low battery. Replace it with a new battery.
●When taking a picture of a bright subject, the bright part may appear white.
●Do not use or store your KDC330 in a place where strong electrostatic, electric
noise (close to motor, transmitter and magnet) and vibration may be generated.
● Do not drop or give an excessive shock to the KDC330.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Side
Be fore using the c a m e ra
Shutter Button
Power Button
Name of Each Part
View Finder
Flash (p.19)
Front
USB Port
Video Port
Adaptor Port
Lens lever
Lens
Picture Size
LCD Panel
Resolution
Hand Shaking Prevention
Macro Mode
Back
Viewfinder
LCD Panel
(Capture Info. Indication)
AF/Flash indicator
(Power indicator)
Battery
Capacity/Adaptor
Self-Timer
Mode selection dial
Del. Flash button
Wide
Tele
Flash Mode
Flash
L HQ ADP
Prohibition
T
★★
Auto Flash
EV
0/3
Strap Mount
Exposure Value
Red Eye
Prevention
A
C/F Open Knob
Self timer/Macro/
Protect/Photo
Protection
Memory Card Cover
Forced Flash
Zoom
Adjustment
Meter
W
Direction Key
(Up and Down,
Left and Right)
OK
DISP/DPOF
Zoom Adjustment Indication
Menu
11
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Using manipulation buttons
Attaching the Strap
Wide/Tele Button: Adjusts optical/digital zoom of the lens.
Wide: Zoom Out / Tele: Zoom In
W
T
OK Button: Saves the setting selected in the camera menu.
OK
Menu Button: Goes to Menu mode adjusting manipulation/
setting of the camera.
MENU
Display: Turns off or on the LCD in front of the camera.
DPOF: Prints photos (Excluding in the Playback)
DISP/DPOF
Self-timer/Macro Button/Protect Button: Converts capture mode
into Self-timer/Macro mode or sets the Protect on the saved
pictures.
Pass the loop of this cord on the end of the strap through the strap mount.
�
�
Then pass the other end of the strap through the loop of the thin cord and pull
the strap tight.
Flash/Delete Button: Determines Flash mode and deletes the
saved pictures.
Installing Batteries
Direction Key: Moves the cursor to up and down or right and left
on the Menu.
●Your camera comes with two AAA batteries so you can start taking pictures
immediately.
KDC330 Camera & Accessories
●Before you start taking pictures, you need to install the batteries and insert a
™
CompactFlash Card (memory card) into the Camera.
�KDC-330
�
Soft case �Memory Card �S/W CD-ROM
�
Video Cable
USB Cable AA-size 2
Nickel Batteries
Adaptor (optional), Camera User°Øs Manual, S/W User's Manual
�
�
Hand Strap
�
�
13
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Batteries in use
Press OPEN and slide the battery compartment cover in the direction of the
�
�
�
arrow, then lift the cover.
Place the batteries in the compartment as indicated by the polarity symbols
●
●
A chargeable (Nickel hydrogen battery) battery is recommended for KDC330.
Batteries for KDC330.
marked inside.
Replace the cover.
- Chargeable (Nickel hydrogen battery) battery: AA size
- Lithium battery: 3V digital camera-only battery (figure)
● Use only fresh batteries of the required size and recommended type.
● Do not mix old and new batteries, different types of batteries (standard,
alkaline, or rechargeable), or rechargeable batteries of different capacities.
* When using a disposable battery, a nickel battery and 2 combined lithium
batteries recommended
● If you do not plan to use the camera for a long time, remove the batteries.
Batteries can leak chemicals that can destroy electronic parts.
- Nickel battery: AA size (2 batteries are basically supplied with KDC330)
●Battery life is about one week in standby and 2 hours in continuous shooting
mode (using alkaline batteries). When batteries become weak, the power
indicator blinks. Wait until the camera automatically shuts off in 30 seconds,
then replace the batteries.
● We do not recommend using Ni-Cd rechargeable batteries. They discharge
●Usable supplementary batteries on KDC330
Alkaline battery: AA size
power quickly and might result in unexpected loss of the pictures.
L
HQ
-
ML
EV
0/3
T
● When you use the USB cable to connect the camera to a computer and the
computer is turned on, the computer supplies power to the camera and the
batteries are disconnected.
- Usable for about 20 minutes
- Although the battery capacity indicator flickers, the
battery can be used for more 10 minutes (However,
flash capture is not possible).
W
● In low temperatures (below 32ºF), battery efficiency lowers and camera
operation time is reduced. When using the camera in cold environments, keep
it warm by covering it while not in use.
● Dispose of old batteries promptly and properly. Do not burn or bury them.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Inserting a Memory Card
Removing a Memory Card
™
●The CompactFlash Card (memory card) is removable and reusable for easy
After checking whether or not the camera is switched off, open the slot cover
by pulling down the C/F open knob under the strap mount.
�
�
�
storage and transfer of your pictures.
●You must insert a memory card into the camera before you take pictures.
By pushing the Eject button under the Memory Card and push the Memory
Card out.
™
●Use only certified cards that carry the CompactFlash logo.
Remove the memory card and close the cover.
C/F Open the Knob
Eject Button
C/F Open Knob
◎ Do not separate the memory card during capture so that
image data being stored is not erased and the memory card
does not encounter a failure.
After checking whether or not the camera is switched off, open the slot cover
�
by pulling down the C/F open the knob under the strap mount.
Hold the memory card by the lip so the connection end is pointed at the
�
camera, and the lip is facing the back of the camera.
Utilizing A Memory Card
◎ The memory card will not slide fully into the slot if it is
inserted facing the wrong way. Forcing the card may damage
your camera.
●The data of the memory card may be read in the card reader of USB support type
(Separately sold).
●The memory card is used to copy and save data in the computer like an external
disk or to move it to another computer.
Slide the memory card all the way into the card slot and close the door.
�
17
Download from Www.Somanuals.com. All Manuals Search And Download.
16
C/F Card Format
Ge tting Re a d y
Switching On and Off
● To use the C/F Card for the first time, you need to format the C/F Card.
● Switching On: The LCD panel is turned on, when you press the Power button.
● Switching Off: The LCD panel is turned off, when you press the Power button
Set the location of the Mode Selection Dial
�
while the power is turned on.
to
Playback mode.
.
Power Button
Press the Menu button, then format the card
through the Direction key.
�
L
ML
HQ
EV
0/3
T
[CARD FORMAT]
PLAY MODE
PLAY MODE
W
SET
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK?
BEEP
SET
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK
BEEP
Setting The Date and Time
● When you turn on the camera as soon as you purchase KDC330, a window to
OK
�
set the date and time appears on the LCD displayer.
● After removing the battery and start the operation of the camera again, the date
PLAY MODE
PLAY MODE
and time setting window is always displayed.
PLAY
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
DELETE ALL NO
PROTECT ALL YES
DPOF ALL
● After setting the current date and time by using the Direction key, press the OK
button.
TIME AND DATE
● TYPE indicates the sequence of date:
2003
01
YEAR
MONTH
DAY
COMPLETE
YMD
MDY
DMY
Year, Month, Day
Month, Day, Year
Day, Month, Year
01
01
HOUR
MIN
07
YMD
TYPE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Normal Shooting
◎ Even though you purchase a new C/F card, you need to
format the card when you use it at the initial stage.
Power button
L
ML
HQ
Checking Battery Capacity Indication
EV
0/3
T
When the power is supplied to the camera, you can see an indication in the shape of
a battery on the LCD panel.
W
Full — fully charged.
L
ML
HQ
EV
0/3
T
low — not fully charged.
Switch the camera on by pressing the Power
On button for about 1 sec. Set the mode
selection dial to auto still capture mode
�
Exhausted (blinking) — The Camera stop
working. Replace the batteries.
W
After waiting for a while until power indicator
(flash) is turned on, determine a picture frame
through either the viewfinder window or the
LCD display.
�
◎ We recommend using a rechargeable battery (nickel
hydrogen), and an alkaline battery may be used as a
supplementary battery.
�Set the subject within the square of the LCD monitor when taking pictures.
�By using zoom or , you can zoom in or out the screen to capture.
◎ If the power is turned off while a new battery has not been
replaced in the case of using the nickel hydrogen battery, the
power may be turned off when the lens has been protruded.
T
W
The subject is closer in the ZOOM IN (TELE) status.
The subject is further in the ZOOM OUT (WIDE) status
Button
Button
T
W
Digital Zoom
If you set digital zoom in camera setting mode, the subject
will be twice the size with added digital movie effect as well as
3 times larger optical zoom in case of pressing the
Checking Available Memory
● If there is no sufficient memory, Memory Full is displayed in the LCD screen, and
Button.
T
taking pictures is impossible.
In this case, take pictures by inserting a new C/F card after turning off the power,
or take pictures when the capacity of memory is sufficient by deleting pictures
saved in the C/F card, after saving them in other devices (Computer hard disk
and other storage units).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Shutter button
When you press gently the Shutter button
halfway, the focus is set (Auto Focus).
◎Upon a short-distance capture, you cannot use the flash.
�
◎Since the images on the View Finder and LCD are different,
Press the above-mentioned shutter a little
harder for about 1 second.
you need to take pictures through the LCD monitor.
�
◎Upon a short-distance capture, a flash capture may damage
one's eyesight, and the quality of an image may not be good.
When using short-distance capture mode, always take
pictures in the flash prohibition state.
Short-distance Capture (Macro)
● Is used for a short-distance capture within the range of 0.2m~0.5m.
Flash Setting
● When pressing twice the
button under the LCD monitor,
icon
Flash is required when taking a picture at night, indoors or in the shade.
appears and thus short-distance capture is undertaken.
The distance in which the flash is used is restricted: Wide - 0.5m ~3.0m and
Tele-0.5m~2.0m.
● If pressing
and
among the Zoom buttons, TELE mode and WIDE
T
W
mode of zoom is set.
Turn on the power of the camera.
�
�
L
HQ
Select adequate flash mode according to capture condition by pressing the
ML
EV
0/3
T
button. The desired flash mode below should be indicated in the upper
LCD monitor.
Flash mode is set as below, whenever the button is pressed:
W
�
Flash prohibition ->Night flash ->Auto flash ->Red eye prevention ->
Forced flash -> Flash prohibition
Button
Button
T
The subject is closer in the ZOOM IN (TELE) status.
The subject is further in the ZOOM OUT (WIDE) status.
W
Digital Zoom
I If you set digital zoom in camera setting mode, the subject
will be twice the size with added digital movie effect as well as
3 times larger optical zoom in case of pressing the
Button (Magnified up to 6 times larger).
T
23
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Self-timer
Flash prohibition
Night flash
The flash does not work. Use this when you want an
ambient capture such as the dusk or night view.
★★
Is used when capturing a subject at night. This makes
the speed of the shutter slow along with the flash.
L
HQ
A
ML
EV
0/3
T
Auto flash
A
When the subject or background is dark, the flash of
the camera is automatically activated.
NEAR
Red eye prevention
Forced flash
Preliminary light is emitted before main light is emitted
to prevent red eye effect.
W
Light is emitted irrespective of dark places or bright
places. The brightness is also adjusted according to
the brightness of the surrounding environment.
● The self-timer function makes it possible to take pictures automatically, after a
short period of time, when you want to take your own picture.
●
icon appears on the LCD monitor, when you press the
button once.
◎ Take pictures within the range of 0.5 ~3m which is the flash
capture range. When an image is captured at a short-
distance, the image may not be clear.
● When you press the shutter in this mode, flickering lasts for 10 seconds and then
the capture is made.
◎ Flash emission prohibition mode emits a natural light when
taking pictures under the indoor light in a too far away
distance where the flash effect is difficult to be exerted, i.e.,
theater performances or indoor sports games. When taking
pictures in flash prohibition mode in the dark, a tripod is
recommended to keep the camera steady.
Self Timer
ON
Macro
OFF
ON
Screen Icon
Details
Self Timer
Macro Self Timer
Macro
ON
◎ When taking pictures without flash under the dark lighting,
the shutter speed automatically slows down; therefore, you
should be careful not to move the camera. If possible, use
the tripod or fix the camera on the flat surface.
OFF
ON
OFF
OFF
OFF
◎ Do not use the flash toward a person at a short distance. The
person's eyesight may be severely damaged to the extent
of losing their eyesight. Do not take pictures within a meter
from an infant.
◎
Specification of Hand Shaking Indication
When the shutter speed lowers to 1/60s or less, the hand shaking warning icon appears.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Pla yb a c k
Setting Basic Playback Mode
T
You may check still pictures or moving images in a simple way.
�
�
Power button
2002/01/01 A
2002/01/01 A
L
HQ
ML
T
EV
0/3
Zoom In
● After playing back still pictures, you may zoom in them.
W
● When you press the
button once, the picture is enlarged twice its size with
T
2X display on the top.
Switch the camera on by pressing the Power button
for about 1 second.
�
● If you press the button once more, the picture is quadrupled as 4X is displayed
on the top.
Set the location of the Mode Selecting Dial to
Playback mode.
�
● You can check the picture by moving the screen with the Direction key.
● Then, press the
button to return to 2X and actual size.
W
Picture Playback
By using the navigator, you can preview a selection
of still pictures.
2X
4X
�
�
�
T
If you want to enlarge or reduce the playback
pictures, use Wide/Tele mode.
�
You may check up and down or right and left in the
enlarged pictures by using the Navigator.
2002/01/01 A
2002/01/01 A
Direction Key
(Navigator)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
26
"D"Indication
Viewing with Multi 6 Screens
● When you press the
button in
mode, the stored files of the 6 screens
W
are displayed in the LCD window.
●
After selecting a desired screen by using the Direction key, press the
button to display it in full on the screen.
T
2002/01/01 A
Full Screen
Selected file
De le te
Delete pictures
DPOF
After moving to the picture to delete, press the
button once.
�
File name saved in the card
(taken sequence)
100-0001 100-0002 100-0003
On the top-left side of the picture, °∞D°± is displayed.
The pictures with "D"ndication are deleted, when you
press the OK button.
�
100-0004
101-0005 101-0006
0001/0008
Selected picture number/
total number
Delete Button
If you press the
button once, the picture is
�
set to delete pending. If you press the button once more, delete pending is
cleared.
DPOF (Direct print)
To delete a picture, press the
button for about a second.
�
● You may directly print the pictures without using a computer.
D
● When you press the DPOF button for the desired picture, the print reservation is
OK
�
made with "
6 screens), when you press the DPOF button, the print reservation is made with
" indicated at the right side bottom of the screen.
" indicated on the full screen. In the Multi Screen (View with
�
"
● By putting the C/F card in the printer, you may print the picture.
2002/01/01 A
2002/01/01 A
29
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Delete All
Ap p lic a tion (Se tting b y Mod e )
Still Autom a tic Ca p ture Mod e
Press the Menu button in
mode.
�
After selecting Delete All under the Play, press
once to the right.
�
�
�
�
Basic Capture
After selecting Yes, press the
button.
OK
You can take pictures according to the value automatically set.
Press the
button once more, when °∞?°± appears.
OK
Power Button
"No File"message appears the moment the pictures are deleted.
L
HQ
ML
EV
0/3
T
PLAY MODE
PLAY MODE
PLAY
PLAY
W
DELETE ALL NO
PROTECT ALLYES
DPOF ALL
DELETE ALL NO
PROTECT ALLYES?
DPOF ALL
OK
OK
Switch camera on by pressing the Power On
button for about 1 second and set the Mode
Selection Dial to Still Automatic Capture
�
Mode
.
PLAY MODE
After waiting for a while until indicated on
the power indicator (Flash), determine a picture frame through
either the View Finder window or the LCD monitor.
�
PLAY
DELETE ALL
PROTECT ALL
DPOF ALL
NO FILE
�Set the subject within the square of the LCD monitor when taking pictures.
T
W
� By using the zoom
or
, you can zoom in or zoom out the screen
to capture.
The subject is closer in the ZOOM IN (TELE) status.
The subject is further in the ZOOM OUT (WIDE) status.
Button
Button
T
W
Digital Zoom
In camera setup mode,
if you choose digital zoom, the
T
subject becomes twice its size with added digital movie effect
as well as 3 times larger with the optical zoom.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
30
[Digital zoom setting]
Shutter button
RECORD MODE
When you gently press about half the
Shutter button, the focus is
automatically set (Auto focus).
�
REC
SIZE
QUALITY
DIGITAL TELE 1X
2X
[Picture quality setting]
RECORD MODE
Press the above-mentioned shutter a little
harder for about 1 second.
�
REC
SIZE
�
�
OK
QUALITY
HQ
DIGITAL TELE SQ
Menu setup
�
�
OK
Press the Menu BUTTON for camera setup.
�
Rec/More/Set menus are in the Menu window. Select
a setting in each menu. When you select the Menu,
use the Navigator (Direction key).
�
More Setting
●Meter: Sets focus setting method when
capturing pictures.
Press OK , if you want to save the setup menu.
[Sidelight Mode Setting]
�
- Multi: Selects multi sidelights.
- Center: Selects central focused sidelight.
- Spot: Selects spot sidelight.
RECORD MODE
MORE
When the value to set is saved, return to the reset (initial) screen by pressing
�
the Menu button.
METER
EV
MULTI
CENTER
SPOT
● Size: Determines the size of a picture
● Ev: Sets the Exposure value.
Rec Setting
- L: 2032x1520
- M: 1280x960
- S: 640x480
You may change from +2 to –2 by 1/3 step.
[Picture size setting]
RECORD MODE
REC
[Exposure Value Setting]
● Quality: Determines the quality
of pictures.
SIZE
L
M
S
RECORD MODE
QUALITY
DIGITAL TELE
MORE
�
�
OK
- HQ: Compressed to about 1/5.
- SQ: Compressed to about 1/10
METER
EV
0/3
● Digital tele: Selects digital zoom.
- 1x: Setting the same size
- 2x: Setting 2 times larger
�
33
Download from Www.Somanuals.com. All Manuals Search And Download.
32
PLAY MODE
SET
Set Setting
TIME/DATE
● Time/Date: Sets the current time and date on the camera.
CARD FORMAT
LCD BRIGHT
BEEP
● Card format: This function is not supported in the continuous capture mode.
COMPLETE
●
●
Card format: This function is not supported in the continuous capture mode.
Beep: Turns on or turns off the beep sound.
- □ □ +
- ■ □ +
- ■ ■ +
Dark,
[LCD Brightness Setting]
[Beep Setting]
Intermediate brightness,
the most bright
PLAY MODE
PLAY MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
-
+
BEEP
[Set Mode Setting]
[Time Setting]
OFF
ON
RECORD MODE
TIME AND DATE
OK
SET
TIME/DATE
2003
01
YEAR
CARD FORMAT
MONTH
DAY
LCD BRIGHT
BEEP
-
+
01
01
HOUR
MIN
TYPE
Returning to capture mode
07
YMD
�
OK
●
Return to Capture mode by pressing the Menu button.
�
[Card Format]
PLAY MODE
SET
PLAY MODE
SET
TIME/DATE
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK?
BEEP
CARD FORMAT CANCEL
LCD BRIGHT OK
BEEP
�
OK
OK
35
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Menu Setup
Press the Menu button for camera setup.
�
Rec/More/Set menus are in the Menu window. Select
a setting in each menu. When you select the Menu,
use the Navigator (Direction key).
�
Press
, if you want to save the setup menu.
OK
�
�
When the value to set is saved, return to the reset (initial) screen by pressing
the Menu button.
Rec Setting
[Rec Setting]
RECORD MODE
REC
SIZE
L
M
S
QUALITY
DIGITAL TELE
[Picture Quality Setting]
�
RECORD MODE
REC
SIZE
[Digital Zoom Setting]
QUALITY
DIGITAL TELE 1X
2X
RECORD MODE
REC
SIZE
QUALITY
HQ
DIGITAL TELE SQ
�
�
OK
�
�
OK
37
36
[ISO Setting]
[White Balance Setting]
More Setting (Manual and Continuous Capture)
RECORD MODE
RECORD MODE
MORE
●Meter: Sets focus setting method when taking pictures.
- Multi: Selects the Multi sidelights.
MORE
METER
EV
METER
EV
ISO
ISO
AUTO
100
- Center: Selects the central focused sidelight.
- Spot: Selects the spot sidelight.
WHITE BAL
FOCUS
AUTO
WHITE BAL
FOCUS
200
400
�
�
OK
● Ev: Sets the Exposure value.
You may change from +2 to ‐2 by 1/3 step.
● ISO: Adjusts the brightness of picture.
Taking pictures in a dark place as the value is higher.
● WHITE BAL: Adjusts the White Balance.
[Focus Setting]
[Set Mode Setting]
RECORD MODE
RECORD MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
MORE
METER
EV
ISO
AUTO
: Auto set.
WHITE BAL
FOCUS
AUTO
MANUAL
: Select this when the weather is clear under the sunlight.
: Select this when it is cloudy.
�
�
OK
: Select this when taking pictures indoor.
: Select this when taking pictures under the fluorescent tubes.
Set Setting
●Focus: Sets the Lens Focus whether or not to adjust as auto or manual.
● Time/Date: Sets the current time/date on the camera.
● Card Format: This function is not supported in moving picture mode.
[Exposure Value Setting]
[Metering Setting]
RECORD MODE
RECORD MODE
MORE
Dark
- □ □ +
- ■ □ +
- ■ ■ +
● LCD Bright: Adjusts the
brightness of LCD.
MORE
Intermediate brightness
Most bright
METER
METER
EV
MULTI
CENTER
SPOT
EV
ISO
0/3
ISO
● Beep: Turns on and off the
beep sound.
WHITE BAL
FOCUS
WHITE BAL
FOCUS
�
�
OK
39
Download from Www.Somanuals.com. All Manuals Search And Download.
38
[Time Setting]
[Set Mode Setting]
Returning to capture mode
RECORD MODE
● Return to capture mode by pressing the Menu button
TIME AND DATE
SET
TIME/DATE
CARD FORMAT
2003
01
YEAR
LCD BRIGHT
BEEP
-
+
MONTH
DAY
※
Specifications of AF / Flash Indicator
01
01
HOUR
MIN
TYPE
07
LED
AF
Indicator
On
Function status
when the AF finishes and when the Focus is OK by pressing
the shutter halfway,
�
OK
YMD
�
[Card Format]
When the AF finishes and when the Focus is not suitable by
pressing the shutter halfway (taking pictures possible)
Flash Flickering
PLAY MODE
SET
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK?
BEEP
PLAY MODE
SET
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK
BEEP
Always after finishing charging
Two
On
ways
During charging (Temporary taking pictures possible)
Flickering
When pressing the shutter halfway, during storing or full buffering
Temporary taking pictures impossible)
Flickering
�
OK
OK
PLAY MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
COMPLETE
[LCD Brightness Setting]
[Beep Setting]
PLAY MODE
PLAY MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
-
+
BEEP
OFF
ON
OK
41
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Menu setup
Still Continuous Ca p ture Mod e
Basic Capture
Press the Menu button for camera setup.
�
● Refers to capturing images continuously, when you press the Shutter button.
Rec/More/Set menus are in the Menu window. Select
a setting to select on each menu. When you select a
menu, use the Navigator (Direction key).
�
● Continuous capturing is possible until the buffer reaches the maximum
In the Still Continuous
Capture Mode, the use of
the Flash is prohibited.
Power
Button
Press OK to save the menu
�
�
When the value to set is saved, return to the reset (initial) screen by pressing
the Menu button.
L
HQ
ML
EV
0/3
T
● Size: Determines the size of a picture
Rec setting
- L: 2040x1530
- M: 1280x960
- S: 640x480
[Picture size setting]
W
RECORD MODE
REC
SIZE
QUALITY
DIGITAL TELE
● Quality: Determines the quality of pictures
- HQ: Compressed to about 1/5.
- SQ: Compressed to about 1/10
By pressing the Power Onbutton
L
M
S
�
for about 1 second, switch the camera on.
Set the Mode Selection Dial to Still
Continuous Capture Mode
● Digital tele: Selects digital zoom.
- 1x: Setting the same size
- 2x: Setting 2 times larger
Decide the capturing composition with
either the View Finder Window or LCD Monitor
�
[Digital zoom setting]
�
RECORD MODE
�Set the subject within the square of the LCD monitor when taking pictures.
REC
� By using zoom
capture.
or
, you can zoom in or zoom out the screen to
W
T
[Picture quality setting]
SIZE
QUALITY
DIGITAL TELE 1X
2X
RECORD MODE
When you gently press the Shutter button halfway, the focus is
automatically set (Auto focus).
�
REC
SIZE
QUALITY
HQ
DIGITAL TELE SQ
�
�
OK
Press the above-mentioned shutter a little harder for about
1 second.
�
After capturing 4 frames consecutively, conduct storing
�
�
�
OK
43
Download from Www.Somanuals.com. All Manuals Search And Download.
42
[Card Formet]
More Setting
PLAY MODE
SET
PLAY MODE
● Meter: Sets a focus setting method when taking pictures.
- Multi: Selects multi sidelights.
SET
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK
BEEP
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK?
BEEP
- Center: Selects central focused sidelight.
- Spot: Selects spot sidelight.
● Ev: Sets the Exposure value. You may change from +2 to-2 by 1/3 step
�
OK
OK
[Sidelight Mode Setting]
[Exposure Value Setting]
RECORD MODE
MORE
RECORD MODE
MORE
PLAY MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
METER
EV
MULTI
CENTER
SPOT
METER
EV
0/3
�
�
OK
COMPLETE
�
Set Setting
●Time/Date: Sets the current time and date on the camera.
[LCD Brightness Setting]
[Beep Setting]
PLAY MODE
PLAY MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
SET
TIME/DATE
●Card format: This function is not supported in continuous capture mode.
CARD FORMAT
Dark
- □ □ +
LCD BRIGHT
-
+
●LCD bright: Adjusts the brightness of LCD.
BEEP
Intermediate brightness
the Most bright
- ■ □ +
- ■ ■ +
OFF
ON
●Beep: Turns on or turns off the beep sound.
[Set Mode Setting]
[Time Setting]
RECORD MODE
Returning to capture mode
●Return to Capture mode by pressing the Menu button.
TIME AND DATE
SET
TIME/DATE
CARD FORMAT
2003
01
YEAR
LCD BRIGHT
BEEP
-
+
MONTH
DAY
01
01
HOUR
MIN
07
YMD
TYPE
�
OK
�
45
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Press the
button to cancel the recording itself.
OK
Moving Im a g e (Movie ) Ca p ture
�
Shutter
Basic Capture
MOVIE STANDBY
MOVIE REC 01 SEC
F
T
MOVIE REC 15 SEC
● Function to capture moving images for a designated time (15 seconds).
F
E
●320x240 resolution in AVI mode.
OK
STORING
●Capturing for about 15 seconds with 15fps is possible.
W
E
Power Button
Menu Setup
MOVIE STANDBY
T
Press the Menu button for camera setup.
�
�
Rec/More/Set menus are in the Menu window.
Select a setting in each menu. When you select
the Menu, use the Navigator (Direction key).
W
By pressing the Power On button for about
a second, this switches the camera on. Set
the Mode Selection Dial to Motion (movie)
Capture mode.
�
�
�
Press OK , if you want to save the Setup menu. (Figure)
�
�
When the value to set is saved, return to the reset (initial) screen by
pressing the Menu button.
Determine a picture frame through either
the View Finder window or the LCD monitor.
Rec Setting
�Set the subject within the square of the LCD monitor when taking pictures.
[Picture Size Setting]
● White Bal: Adjusts the White Balance.
T
� By using zoom
or
W
, you can zoom in or out the screen to capture.
RECORD MODE
REC
AUTO
: Auto set.
When you gently press the Shutter button halfway, the focus is
automatically set (Auto focus).
WHITE BAL
AUTO
: Selects when the weather is clear
under the sunlight.
: Selects when it is cloudy.
Press the above-mentioned shutter a little harder for about
1 second.
�
: Selects when taking pictures indoor.
: Selects when taking pictures under
the fluorescent tubes.
When you press the Shutter button once more, the capture
forcefully ends.
�
47
Download from Www.Somanuals.com. All Manuals Search And Download.
46
PLAY MODE
SET
Set Setting
TIME/DATE
● Time/Date: Sets the current time and date on the camera.
CARD FORMAT
LCD BRIGHT
BEEP
● Card format: This function is not supported in continuous capture mode.
Dark
- □ □ +
- ■ □ +
- ■ ■ +
● LCD bright: Adjusts the brightness of LCD.
COMPLETE
Intermediate brightness
the Most bright
● Beep: Turns on or turns off the beep sound.
�
[Beep Setting]
LCD Brightness Setting]
[
PLAY MODE
PLAY MODE
SET
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
TIME/DATE
CARD FORMAT
Set Mode Setting]
[
Time Setting]
[
LCD BRIGHT
-
+
BEEP
RECORD MODE
SET
OFF
ON
TIME AND DATE
�
OK
TIME/DATE
CARD FORMAT
2003
01
YEAR
LCD BRIGHT
-
+
MONTH
DAY
BEEP
01
01
HOUR
MIN
07
YMD
Returning to capture mode
● Return to Capture mode by pressing the Menu button.
TYPE
�
OK
�
Card Format]
[
PLAY MODE
SET
PLAY MODE
SET
TIME/DATE
TIME/DATE
CARD FORMAT CANCEL
LCD BRIGHT OK?
BEEP
CARD FORMAT CANCEL
LCD BRIGHT OK
BEEP
�
OK
OK
49
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Menu Setup
Pla yb a c k Mod e
Basic Playback
Press the Menu button for camera setup.
�
�
Rec/More/Set menus are in the Menu
window. Select a setting to select on each
menu. When you select a menu, use the
Navigator (Direction key).
You may check still pictures or moving images in a simple way.
Power Button
Press OK , if you want to save the setup menu
�
Play Mode
● Delete All: Deletes the entire pictures stored.
● Protect all: Protects the entire pictures stored.
If you set Protect mode, you cannot delete the picture randomly.
● DPOF all: Prints out the entire pictures stored.
By pressing the Power On button for about a
second, this switches the camera on
�
Set the Mode Selection Dial to Playback
mode
�
Delete All]
[
By using the left and right buttons of the
Navigator (Direction key), conduct a preview
through the selection of the pictures taken.
�
PLAY MODE
PLAY MODE
PLAY
PLAY
DELETE ALL NO
PROTECT ALL YES
DPOF ALL
DELETE ALL NO
PROTECT ALL YES?
DPOF ALL
If you want to enlarge or reduce the
pictures, use W/T (Wide/Tele).
�
You may check the up and down or left and
right by using the Navigator in an enlarged
picture.
�
OK
OK
�
PLAY MODE
PLAY MODE
PLAY
PLAY
Slide Show
DELETE ALL
PROTECT ALL
DPOF ALL
DELETE ALL
PROTECT ALL
DPOF ALL
●
If you press the Shutter switch in (Symbol) mode, stored screens
pass by one by one.
NO FILE
COMPLETE
● When you find a desired screen, you may stop the screen by pressing
the Shutter switch once more.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
50
(Set Mode Setting]
[Time Setting]
[Removing Protect All]
Selecting Protect All]
[
RECORD MODE
PLAY MODE
PLAY MODE
TIME AND DATE
SET
TIME/DATE
PLAY
PLAY
DELETE ALL
PROTECT ALL PROT
DELETE ALL
2003
01
YEAR
CARD FORMAT
PROTECT ALLPROT
MONTH
DAY
LCD BRIGHT
BEEP
+
DPOF ALL
UNPROT
DPOF ALL
UNPROT
01
01
HOUR
MIN
07
YMD
TYPE
�
OK
�
�
[Card Format]
PLAY MODE
SET
PLAY MODE
SET
Selecting DPOF All]
Removing DPOF All]
[
[
TIME/DATE
TIME/DATE
PLAY MODE
PLAY MODE
CARD FORMAT CANCEL
LCD BRIGHT OK?
BEEP
CARD FORMAT CANCEL
LCD BRIGHT OK
BEEP
PLAY
PLAY
DELETE ALL
PROTECT ALL
DPOF ALL
DELETE ALL
PROTECT ALL
DPOF ALL
SET
RESET
SET
RESET
�
OK
OK
�
�
OK
PLAY MODE
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
Set Setting
COMPLETE
● Time/Date: Sets the current time and date on the camera.
● Card format: This function is not supported in the continuous
capture mode.
�
[LCD Brightness Setting]
[Beep Setting]
PLAY MODE
PLAY MODE
● LCD bright: Adjusts the brightness of LCD.
● Beep: Turns on or turns off the beep sound.
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
BEEP
SET
TIME/DATE
CARD FORMAT
LCD BRIGHT
-
+
BEEP
OFF
ON
�
�
OK
53
Download from Www.Somanuals.com. All Manuals Search And Download.
52
8.De ta ils of Ea c h Func tion
●In KDC330, the conversion is possible in Still Automatic Capture mode,
Sidelight Method
Still Manual Capture mode and Still Continuous Capture mode.
● In KDC330, conversion to sidelight mode in Still Automatic Capture
mode, Still Manual Capture mode and Still Continuous Capture mode is
possible.
◎
◎
The following are available exposure calibration devices:
Use Up and Down of the Direction key for conversion.
● Multi sidelights
13-step conversion is possible with 1/3 step.
Determines the optimum exposure value by dividing the capture scope
of CCD and side lighting. You may get precise capture in a variety of
scenes. In a usual picture capturing, we recommend multi sidelights
capturing.
When you cancel exposure calibration, set it to 0/3.
ISO Setting
● Center sidelight
By giving 80% to ®˘ scope of the center of the screen and side lighting,
the exposure value is determined. This mode is suitable when capturing
pictures based on the center exposure value, according to the intention
of the person taking pictures.
● ISO refers to film sensitivity, which is the international standard.
ISO refers to sensitivity toward light. In a digital camera, which does not
have film, conversion value is used.
● The standard sensitivity is 100. However, in a low brightness, sensitivity
becomes higher. A photographer may set higher than standard, or take
pictures brightly in a dark place.
● Spot sidelight
By side lighting only 1/32 scope of the entire central part of the screen,
the exposure value is determined. The sidelight scope is indicated in the
center of the LCD monitor. This mode is suitable, when you want to
capture pictures based on partial exposure of the screen: e.g. - When
there is reverse light or severe difference in contrast.
● Conversion in Still Manual Capture mode is possible in KDC330.
Auto: Standard sensitivity is set in a usual photographing; however, in a
low brightness, the sensitivity increases.
EV Setting
100: Standard sensitivity (Equivalent to ISO 100)
200: ISO 200
400: ISO 400
● EV refers to exposure value, in other words, exposure calibration value.
● Exposure calibration can brighten or darken the screen according to
● If sensitivity is higher, take pictures in a place where the amount of light
is not sufficient.
capture conditions and purposes.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
54
White Balance
Conne c tion to Exte rna l Eq uip m e nt
● Adjusts balance in line with the color of lighting surrounding the subject.
Through this adjustment, a white subject is viewed as white.
Connection to Computers
You may check the saved image data through a computer by connecting
KDC330 to the computer.
● In most cases, auto capture is possible. However, this mode is used
when you want to fix to a specified lighting or condition.
The original images can be expressed at random by the user through
application software-Ulead Photo Express and Ulead Photo Explorer (See
11. Application Software).
● Conversion in Still Manual Captured mode and Motion (Movie) Capture
mode is possible in KDC330.
● Spot sidelight
AUTO
: Automatic adjustment.
: Selects when the weather is clear under the sunlight.
: Selects when it is cloudy.
: Selects when taking pictures under the light bulb.
: Selects when taking pictures under the fluorescent tubes.
◎
Recommended
computer
specifications
USB
�
- Pentium MMX
200MHz or higher
-
32MB RAM or higher
Focus
- Available USB Port
- 4x CD-ROM Driver
USB케이블 연결시
● Refers to adequately sets the focus of the subject to be photographed.
● The types of focus are selected in Still Manual Capture mode in KDC330.
- Auto: Refers to focusing automatically.
Printer (DPOF)
When you press half the shutter, AF green lamp beside the View Finder
is lit and focus is automatically set.
● Printing the pictures is possible without a computer.
● The setting contents of the Printer Default are in the memory and stored
in C/F Card as a Printer setup file.
L
ML
HQ
A
- Manual: A user sets the focus at random.
EV
0/3
T
By using the Direction key
focus adjustment is possible.
, the
●The selected data is saved in the C/F Card and can be printed through
C/F Card direct printing.
NEAR
W
57
Download from Www.Somanuals.com. All Manuals Search And Download.
56
◎Digital Print Order Format (DPOF)
10. Use of Softwa re
Digital Print Order Format is DPOF to automatically print the
images photographed through the digital camera in a printer.
This is standardized print information, which enables more
convenient image print.
The following is the description regarding the picture downloading process
from the camera by using the USB mass storage of the KDC330 digital
camera.
Functions of USB Mass Storage
※ Before using the camera, check whether or not the printer
● You many use the digital camera like a USB storage unit by using the
USB Mass Storage Class Driver. The operating system supporting the
USB Mass Storage Class Driver is as follows:
supports DPOF.
Focus
o Windows ME (Millennium Edition)
o Windows 2000
● The types of focus are selected in Still Manual Capture mode in KDC330.
o Windows XP
● You may enjoy a net meeting as well as saving, processing, editing of
still images and moving images.
◎For Windows 98/98SE, use it after installing the driver for
KDC330 Windows 98/98SE of supplied bundle CD.
Description of the Function of USB Mass Storage
Switch on the camera.
�
�
Connect the camera to the USB port of a PC.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
58
a PC, or the pictures from
the PC can be copied to
the card of the camera.
When the camera is
�
connected to the PC, the
camera is converted to PC-
connectioned mode. Then,
the USB Mass Storage
Driver of the camera is
automatically installed in
the operation system of the
PC. Thus, you may use it
immediately.
The portable mobile
�
disk provides the function
of hard disk of a PC.
Therefore, you may use it
as you use general disks.
Open "Windows
�
Search" to look into the
contents of the camera.
In the Windows
�
Search, the portable mobile
disk drive is connected as
in the Figure. This driver is
connected to the Compact
Flash card of the camera.
The pictures saved in the
card can be copied through
61
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Description of the Function of USB Mass Storage
11. Ap p lic a tion Softwa re
Installing Bundle Software
Switch on the camera.
�
�
�
Connect the camera to the USB port of a PC.
Installing Ulead Photo Express 4.0SE
When the camera is connected to the PC, the camera is
converted to PC connection mode. Then, the USB Mass
Storage Driver of the camera is automatically installed in the
operation system of the PC. Thus, you may use it
immediately.selection of the pictures taken.
When you insert the bundle CD in the CD-ROM drive, the
�
following installation image is executed
Open "Windows Search" to look into the contents of the
camera.
�
In the Windows Search, the
�
portable disk drive is
connected as in the Figure.
This driver is connected to
the Compact Flash card of
the camera. The pictures
saved in the card can be
copied through a PC, or the
pictures from the PC can be
copied to the card of the
camera.
Click Installation Photo Express. You see the following
�
installation wizard. Click N (Next)
The portable disk provides the function of hard disk of a PC.
Therefore, you may use it as you use general disks.
�
63
Download from Www.Somanuals.com. All Manuals Search And Download.
62
After reading the user
agreement carefully,
click Y (Yes), if you agree
with it.
Select program setting
�
�
mode, then click N (Next).
Select where to put the
program icon among the
folders in the Start menu.
Click N (Next).
�
After reading the user
agreement carefully,
click Y (Yes), if you agree
with it.
�
When the next screen as in
the figure appears, carefully
read it. If you want to
correct what you entered,
click B (Back) and select
other option. If you cannot
find anything wrong, click N
(Next) to start the
�
Select a folder to install
the Ulead Photo Express
4.0 SE Platinum.
�
installation.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Select Korean as the
pertinent language, and
click OK.
When the installation
finishes, a message
"Installation Wizard has
finished" appears.
�
�
Finish the installation by
clicking on "Finish"
When installation wizard
appears, click N (Next).
�
Installing Ulead Photo Explorer 7.0 SE Platinum
When you insert bundle CD in the CD-ROM drive, the following
�
Ulead Photo Explorer installation screen appears. Select
"Ulead Photo Explorer 7.0 SE Platinum Installation" in the
screen.
After reading the user
agreement carefully,
click Y (Yes), if you agree
with it.
�
67
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Enter the user
information and click N
(Next).
Select a program folder
to put Ulead Photo
Explorer 7.0 SE Platinum
icons and click N (Next).
�
�
�
�
Select country. Select
currently used TV
�
Select the folder to
install the Ulead Photo
Explorer 7.0 SE platinum.
Click N (Next).
system if the selected
country supports both
NTSC/PAL TV system
and click N (Next). In
Korea, only NTSC
system is used
When asked whether or
not to connect the image
file to the Photo
Explorer, select your
desired option and then
click N (Next). You may
see the saved images by
using the Ulead
�
Select a hot key icon
option and click N (Next).
program, when you
double click the image
file in the Windows
Search, if you connect
69
Download from Www.Somanuals.com. All Manuals Search And Download.
68
the image file format to the Ulead program. The installation starts
when you click on N (Next).
Downloading Pictures from the Camera
Downloading Pictures with Ulead Photo Express 7.0 SE
When the installation
finishes, a window
saying the installation
�
Switch your camera on and connect to the USB port of a
�
computer by using the supplied USB cable
wizard has finished
appears, and it asks if
you want to re-start your
computer. Restart your
When you connect your camera to a computer, a drive called
"Mobile Disk" is created in the Windows Search.
�
computer after saving all
the data and closing all the
Execute Ulead Photo Express 4.0 SE.
�
executed programs. If you use Alt and Tab on the keyboard, you
can move to the current work or executing other programs.
When you executing Ulead photo Express 4.0 SE, you see the
�
"Mobile Disk"on the left pane in the following window. In the
DCIM/101KOCOM folder within the drive, the saved pictures
are stored.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Execute edit/copy/move by selectingdesired pictures as in the
same manner as the Photo Express.
�
Select and double click the files to be edited or saved on the
hard disk, or copy/move to the hard disk. The outline of the
selected pictures looks different. Also, when you
simultaneously select many pictures, select "Select All"in the
Edit menu, or use "Ctrl" or "Shift"on the computer keyboard to
use more conveniently.
�
Downloading Pictures with Ulead Photo Explorer 7.0 SE
Platinum
Turn your camera on and connect the camera to the USB port
�
of a computer.
.
Execute the Ulead Photo Explorer 7.0 SE Platinum.
�
"Portable Disk" drive is
�
created in the left pane
of the Explorer as in the
same manner as the
Photo Express. The
saved pictures are in the
drive.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Ca me ra Sp e c ific a tions
Capture Interval
LCD Display
3 sec or less up to 4 frames
Optical 3x Zoom Full-automatic Digital Camera
Product Type
Optical Sensor
1.6 inch, 70,000 pixel D-TFD
Total 3.34 mega pixel/3.24 mega efficient pixel, 1/2.5 inch CCD
Back Light: White LED Brightness adjustment: Fixed 3 steps
USB ver 1.1 compatible, USB Mass Storage Driver
Windows 98/98SE/ME/2000/XP
Back Light
PC Driver
No. of Record Pixel 2032x1520/ 1280x960/640x480 Pixel
SO Sensitivity
Auto/Manual (Equivalent to ISO 100, ISO 200 and ISO 400)
Recording Method
Still Image: JPEG (ExiF 2.2 compatible), DCF, DPOF
Moving Image: AVI (pursuant to Open DML Motion JPEG), 320x240
Battery Capacity
Indication
Clock Back Up
OSD
Quality of Image
(Compression Rate)
Recording Unit
3 steps indication: 3.0V, 2.2V, 2.0V
HQ: Compressed to about 1/5, SQ: Compressed to about 1/10
About 6 minutes
C/F Memory type I (C/F type
English
Resolution and
2032x1520 HQ: About 13 frames / SQ: About 26 frames
1248x960 HQ: about 32 frames SQ: About 65 frames
Power
AAx2 (Nickel hydrogen), supplementary battery (Alkaline)
exclusive AC adapter (3.0V, 3A)
Maximum No. of Frames
(16MB CompactFlashTM
)
640x480
HQ: About 200 frames SQ: About 400 framesI)
Power Saving
Function
Sleep mode after 1 sec, after that auto power off
Auto/Manual (Sun light, shade, fluorescent tube and light bulb)
White Balance
Lens
Zoom: x1~x3 non step Zoom F value: F2.8/ F 5.6
Focus: TTL Contrast detection AF (Auto Focus), Manual Focus
TV/Monitor Output
Conditions to Use
NTSC/PAL (by product)
Digital Zoom
When picture taking: 2x, When playing back: 4x
Standard mode: 0.5m~infinity, Macro Mode, Macro Mode: 0.2~0.
Single/6 screen division/Slide Show/Zoom playback/Motion Playback
Auto and manual exposure (EV, 13 steps by 1/3 EV step)
1 sec, ®ˆ~1/1000 sec
Operating temperature: 0~40°∆ C, humidity: 10% ~ 90% (In
case of no dew)
Focal Range
Playback Mode
Exposure Mode
Shutter Speed
※The specifications are subject to change without notice for quality improvement.
※TThis camera is 2nd grade home equipment; thus not suitable for vehicle monitoring.
Sidelight Mode
View Finder
Multi, Center, Spot sidelights
Optical Zoom Finder
Strobe Mode
Auto/Manual (red-eye prevention, night view, forced flash, flash
prohibition), automatic exposure control by lighting sensor,
maximum 3.0m
Continuons Capture Mode ode 2 commas/sec, maximum
4 commas Moving Image Mode: 15fps (recording time: 15 sec)
10 sec
Capture Mode
Self Time
Optional sound, warning sound
Sound
Operating Time
Playback Time
5 sec or less
1 sec or less
75
Download from Www.Somanuals.com. All Manuals Search And Download.
74
KOCOM Bldg., 260-7 Yumchang-Dong, Kangseo-Gu, Seoul, 157-040, Korea
Download from Www.Somanuals.com. All Manuals Search And 2D0o03w.0n2load.
|