140BM LCD WIRELESS OBSERVATION
SYSTEM
U K
User’s manual
V1.0
L I F E I S M O R E ! T R U S T U S
T R U S T . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
140BM LCD WIRELESS OBSERVATION
SYSTEM
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
L I F E I S M O R E ! T R U S T U S
T R U S T . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
Instructions when using for the first time
Chapter
1.
2.
Installing the camera and the monitor
Reception quality
(4.3)
(4.6)
U K
1
Introduction
This instruction manual is for users of the TRUST 140BM LCD WIRELESS
OBSERVATION SYSTEM. This device can be used as an observation system, for
example, for your baby. This device works using radio frequencies and, therefore,
does not require any cables.
Advantages:
•
•
•
Transmits wireless audio and video signals from the camera.
The 2.4 GHz FM signal passes through walls, floors and ceilings.
Can be expanded using other Trust Convenience products (see
2
Safety
Carefully read the following instructions before use:
1.
2.
Do not use this device in a damp environment such as a bathroom, damp
basement, swimming pool, etc.
Never insert objects into the holes on the outside of this device, because you
may touch live components. This may cause a fire or give you an electric
shock.
3.
Do not try to repair this device yourself. If you open or remove the casing,
you may accidentally touch live components. There are also other risks if
you open or remove the casing.
4.
5.
Position the device so that the cables cannot be damaged.
The camera’s IR LED’s and the wireless transmitter are not harmful to
humans.
6.
7.
Keep all components out of the reach of children.
Fingerprints or dirt on the lens may affect the performance of the camera.
Avoid touching the lens with your fingers.
8.
9.
Do not use the device in a dirty or dusty environment.
Only use this device with the power adapter provided or with the type of
batteries indicated.
10.
11.
The frequencies used are for general use. It is possible for the video and
audio signals to be detected by others. In order to protect your privacy, it is
recommended to turn the camera off when it is not being used.
Do not use old batteries and new batteries together. This may damage the
device.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
3
Approval
0678
-
This device meets the essential requirements and other relevant conditions of the
applicable European directives. The Declaration of Conformity (DoC) is available
-
-
The device has been approved in accordance with RF CE0678
.
This wireless device works at a frequency of 2.434 ~ 2.473 GHz. It meets the
essential requirements and other relevant conditions of R&TTE Directive
1999/5/EC and can be used in the following countries.
AT/BE/DK/FI/FR/DE/GR/IE/IT/LU/NO/PT/ES/SE/CH/NL/UK/HU/CZ/SK/PL.
The following limitations are applicable for certain countries.
France -> only channel 2 may be used if the device is used outdoors.
(All three channels may be used if the device is used indoors.)
There may be restrictions for the use of this device outside of the EU. If this device
is used outside of the EU, check whether this device meets local regulations.
Frequencies: 2.434 ~ 2.473 GHz. Bandwidth: 20 MHz. Transmitting power: 10
mW.
-
-
4
Installation
4.1
Preparing for installation
The connections on the monitor are given in table 1 and figure 1.
Item
A
Description
Comments
6 Volt power adapter for the
monitor.
The voltage is shown on the label on
the adapter.
Monitor’s power adapter
connection.
B
C
Extra:
For viewing the camera image on a TV
or to record the camera image on a
VCR.
Scart connection
Monitor’s audio/video
connection
D
Table 1: Monitor connections
The connections and switches of the camera are given in table 2 and figure 2.
Item
E
Description
Comments
9 Volt power adapter for the
camera.
The voltage is shown on the label on
the adapter.
Camera’s power adapter
connection.
F
On/Off/Night mode switch
Channel selection switch
Power indicator
G
H
I
Is lit when the camera is turned on.
Table 2: Camera connections
The monitor settings and options are given in table 3 and figure 3.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
Item
A
Description
Comments
Level button
Sets the sound level for the Auto mode. When
using the Auto mode, the monitor turns on
automatically when the set sound level is
exceeded.
U K
Power/volume button
Turns the sound on and off and adjusts the
sound level.
B
Auto switch
Turns the Auto mode on and off.
C
D
E
F
Channel indicator
Power indicator
Lights up for the chosen channel.
Is lit when the monitor has been turned on.
Channel selection
switch
Brightness buttons
Attachment points
Adjusts the brightness.
G
H
Use these to attach the monitor to an
attachment plate or wall.
Battery cover
If necessary, insert four AA batteries here.
I
Table 3: Monitor components
The camera settings and options are given in table 4 and figure 4.
Item
J
Description
Comments
Infrared LED’s
Makes it possible to receive clear
images in dark conditions when in the
Night mode.
Lens
Records the image.
K
L
Lens ball
Used to alter the vertical viewing
angle.
Microphone
Records the sound.
M
N
Attachment points
Use these to attach the camera to an
attachment plate or wall.
Battery cover
If necessary, insert four AA batteries
here.
O
Table 4: Camera components
4.2
Inserting the batteries (optional)
You can use batteries (not included) if you do not wish or are not able to use the
power adapter for the camera or the monitor. Use AA batteries.
1.
Remove the battery cover (A) on the rear of the monitor or the rear of the
camera (see figure 5).
2.
Insert the batteries as indicated inside the battery compartment (B).
3.
Close the battery flap.
Note:
Inserting the batteries incorrectly may cause damage.
Only use alkaline or rechargeable NiMH batteries (type AA). The
image quality and the transmission range are reduced when the
battery power is reduced. It is, therefore, recommended to use the
power adapter whenever possible.
If you use batteries, it is recommended to change these or charge
them regularly.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
4.3
Connecting
1.
Connect the 6 Volt power adapter to the monitor (A and B, figure 1) and the 9
Volt power adapter to the camera (E and F, figure 2).
2.
3.
Switch the camera to channel 1 using switch H (see figure 2).
Turn the camera on (On or Night) using the switch (G, figure 2). The voltage
indicator (I, figure 2) will be lit.
Note:
4.
If you turn the camera on in the Night mode, the image displayed on
the monitor (or a possible TV or video) will be black-and-white.
Turn the monitor on by rotating the PWR/VOL button (B, figure 3). Adjust the
volume as required. A click will be heard and felt and the voltage indicator (E,
figure 3) will be lit.
5.
Set the monitor to channel 1 by pressing the switch (F, figure 3) a number of
times until the channel indicator (D, figure 3) is lit. You will now see the image
detected by the camera.
6.
7.
8.
Adjust the brightness of the image as required using the brightness buttons
on the monitor (G, figure 3).
Optional: connect the Scart cable to the monitor and the VCR (C and D, figure
1). The image detected by the camera can now be recorded.
The security system is now operational.
4.4
Extra functionality
To save energy, this system has an Auto mode (C, figure 3). The monitor will be
turned on if noise is detected by the microphone on the camera.
1.
Adjust the noise sensitivity level as required using the level button (A, figure
3).
Note: The noise sensitivity level can be adjusted from level 1 to level 9. Level 1 is
the least sensitive and level 9 is the most sensitive.
2.
Press the Auto button on the monitor (C, figure 3). The monitor will be turned
off.
3.
When the noise detected by the microphone on the camera reaches the set
sensitivity level, the monitor will turn on automatically.
The monitor will turn off automatically as soon as the noise level drops below
the set noise sensitivity level for an uninterrupted period of 1 minute.
The Auto mode has no effect on the choice of channel.
If you use the Auto mode, the image will still be transmitted via the
monitor’s AV-out connection to a VCR or TV which may be connected
to the scart connection.
4.
Note:
4.5
Positioning and use
1.
Use the attachment aids to attach the camera and/or the monitor to a wall,
etc. (see figure 6).
2.
When positioning the camera, keep the wiring and the camera out of the
reach of children and babies.
4.6
Reception quality
1.
The reception from the camera depends on the number of walls, doors, floors,
ceilings, etc. between the monitor and the camera. Metal and constructions
containing metal can also considerably reduce the range and quality of the
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
signal. Therefore, in order to have the best possible reception, try to avoid
these obstacles as much as possible.
2.
3.
People walking near the transmitter or receiver (particularly between the two)
may also reduce the quality of the reception.
Try to achieve the best possible reception by positioning the camera and the
monitor correctly in relation to each other. Both devices have built-in aerials.
The aerials can be directed by moving the devices.
U K
4.
The device may be affected by external sources of interference, such as
microwave ovens, the weather and other devices which use the same
frequency as this device. If possible, turn these devices off when using the
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM.
4.7
Expanding the wireless security system
If you have several black-and-white or colour cameras and/or receivers, you can use
these to expand your wireless system. For these additional cameras and/or receivers
to function correctly, they must to be connected to the system and operate on the
same frequency (signal). A maximum of 3 wireless cameras can be connected to the
monitor. There is no theoretical limit to the number of receivers which can be added
to the system.
This monitor is ideal for use with other TRUST CONVENIENCE products. See the
connected to this monitoring system, you must manually switch between the
channels.
5
Troubleshooting
Problem
Cause
Possible solution
The power supply has not been Check whether the power
No image on the
monitor.
connected.
supply has been connected
to the monitor and the
camera correctly.
The batteries have been
inserted incorrectly.
Reinsert the batteries
The batteries in the camera
and/or the monitor are empty.
Replace the batteries.
Another RF device is operating
on the same channel as the
TRUST 140BM LCD
Change the channel of both
the camera and the receiver.
WIRELESS OBSERVATION
SYSTEM.
Change the physical location
of the camera (transmitter)
and/or the receiver by
altering the direction or the
distance.
The camera is set up in a dark
room and the Night mode has
not been selected.
Select the Night mode on
the camera.
The monitor has been set to
the Auto mode.
Turn off the Auto mode or
adjust the noise sensitivity
level.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
Problem
Cause
Possible solution
The batteries in the camera
and/or monitor are empty.
Replace the batteries in the
camera and/or monitor.
The monitor and the camera
are in different rooms and one
of these rooms (or both) is
surrounded by a metal
construction.
Position the monitor and/or
the camera in a different
room which is not
surrounded by the metal
construction.
The built-in aerials are not
directed at each other correctly. of the camera or monitor.
Change the physical location
There is noise on
the image and/or
the sound.
Turn the camera and/or the
monitor until the image
becomes sharp.
The transmission range is
restricted by objects, e.g.
people, walls, etc.
Change the physical location
of the camera or monitor.
The camera and the monitor
are too far apart.
Place the camera and the
monitor closer together.
The wrong channel has been
selected.
Set the camera and the
receiver to the same
channel.
The channel is being used by
another device.
Select a different
transmitting and receiving
channel.
The signal is affected by an
external source of interference.
Select a different
transmitting and receiving
channel.
Turn off or remove the
source of interference.
The power adapter plug has not Insert the plug correctly into
The camera
suddenly stops
working.
been plugged in correctly.
the camera and/or the
monitor.
The latest FAQs are available
on the Internet.
for FAQ’s and other product
information.
The problem is
not listed here.
guarantee and service support, such as up-to-date FAQ’s. You will be automatically
informed of developments to your product and other Trust products. You will also
have the chance of winning some spectacular prizes.
If you still have problems after trying these solutions, please contact one of the Trust
Customer Care Centers. You can find more information at the back of this instruction
manual. Please have the following information available:
•
•
•
The item number. This is 13816 (European model) or 13817 (UK model).
A good description of what does not work.
A good description of when the problem occurs.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
6
Specifications
6.1
Wireless range
The system has been tested in the open field using both power adapters (not with the
batteries). The maximum distance at which the image and sound signals are still
acceptable is 100 m.
U K
The system has been tested indoors using both power adapters (not with the
batteries). The signals can be transmitted a distance of 20 metres with only one
concrete floor (no walls, etc.) between the camera and the monitor.
In the Night mode, the camera can record clear images in an unlit area up to a
distance of 2.5 metres.
The system has been tested with rechargeable 1800 mAh NiMH batteries. The
monitor will work for approximately 4 hours in the Normal mode with maximum
brightness. The camera will work for 8 hours in the Night mode. The distance
between the camera and the monitor was 10 metres.
Note:
Depending on the circumstances in which the camera and monitor are
used, the measured distances and times are no guarantee for this
device.
6.2
Technical information
The table below gives the technical specifications for the monitor and the camera.
Description
Response
RF / 2.434 ~ 2.473 GHz
Wireless technology [RF, IR, … +
frequency]
2.434 / 2.453 / 2.473
CMOS 1/3”
FM
Frequency per channel [GHz] [1 / 2 / 3]
Optical module [CCD / CMOS / ...]
A/V modulation/demodulation method
Lens viewing angle
45°
f 6.0 mm, F1.8
1.5 inch
Lens focal distance
Monitor screen size
117,600 pixels
Colour
Number of pixels for the monitor
Monitor screen type
100 m in free space using the
power adapter provided.
Maximum wireless distance between the
camera and the monitor (metres)
20 m in a closed space with a
maximum of 1 obstacle using the
power adapter provided.
RF approval no. (CE xxxx !)
Other outputs
CE0678
A/V out on monitor
PAL: 628 (H) x 582(V)
Camera resolution ... x ...
Power supply
Monitor: JAD0600600E Input
230VAC 50 Hz / Output 6VDC
600mAh
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM
Camera: JAD0900300E Input 230
VAC 50 Hz / Output 9 VDC 300
mAh
PAL
Video output signal
Camera 123 x 92 x 59
Monitor 140 x 85 x 53
Camera 175 g (excluding batteries)
Monitor 240 g (excluding batteries)
Product size [HxWxD] (mm)
Weight (kg)
7
Warranty conditions
-
Our products have a two-year manufacturer's warranty which is effective from the
date of purchase.
-
-
-
-
If there is a fault, return the product to your dealer and include a description of the
fault, the proof of purchase and all the accessories.
During the warranty period, you will receive a similar product, if one is available. If
no similar product is available, your product will be repaired.
Please contact our help desk for missing components, such as the instruction
manual, software or other components.
The warranty becomes invalid if the product has been opened, if there is
mechanical damage, if the product has been misused, if alterations have been
made to the product, if the product has been repaired by a third party, in the case
of negligence or if the product has been used for a purpose other than that
originally intended.
-
-
Excluded from the warranty:
•
•
•
Damage caused by accidents or disasters, such as fire, flood, earthquakes,
war, vandalism or theft;
Incompatibility with other hardware/software which is not stated in the
minimum system requirements;
Accessories such as batteries and fuses (where applicable).
Under no circumstances will the manufacturer be held responsible for any
incidental or consequential damage, including the loss of income or other
commercial losses resulting from the use of this product.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER CARE CENTERS
Residents in the UK and Ireland should contact:
UK Office
Phone
Fax
Mon - Fri
From 8:00 - 16:00
+44-(0)845-6090036
+31-(0)78-6543299
I residenti in Italia possono contattare:
lun - ven
9:00 - 13:00 /
14:00 -18:00
Ufficio italiano
Telefono
Fax
+39-051-6635947
+39-051-6635843
Les habitants de la France et de l’Afrique du Nord peuvent contacter :
Bureau français
Lundi-vendredi
De 9:00 à 17:00
Téléphone
Fax
+33-(0)825-083080
+31-(0)78-6543299
Kontaktadresse für Einwohner Deutschlands:
Deutsche Geschäftsstelle
Mo – Fr
9:00 - 17:00
Telefon
Fax
0800-00TRUST (0800-0087878)
+31-(0)78-6543299
Los habitantes de España pueden ponerse en contacto con:
Oficina española
lun – viernes
De las 9:00 a las
17:00 horas
Teléfono
Fax
+34-(0)902-160937
+31-(0)78-6543299
Osoby mieszkające na terytorium Polski powinny skontaktować się:
Biuro w Polska
Tel
Od pon. do pt.
+48-(0)22-8739812
+31-(0)78-6543299
w godz 09:00-17:00
Fax
Inwoners van Nederland kunnen contact opnemen met:
Kantoor Nederland
ma – vr
9:00 - 17:00 uur
Telefoon
Fax
0800-BELTRUST (0800-23587878)
+31-(0)78-6543299
All other countries / Alle anderen Länder / Tous les autres pays
Tutti gli altri paesi / Todos los demás países / Alle andere landen
European Head Office
Mon - Fri
From 9:00 - 17:00
Phone
Fax
+31-(0)78-6549999
+31-(0)78-6543299
L I F E I S M O R E ! T R U S T U S
T R U S T . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
|