Tricity Bendix Washer BIW 104 W User Manual

OPERATING & INSTALLATION  
INSTRUCTIONS  
WASHING MACHINE  
BIW 104 W  
35.292.918/0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Maintenance and Cleaning  
Descaling  
17-18  
17  
For the User  
After each wash  
Maintenance Wash  
External cleaning  
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the pump  
Cleaning the water inlet filter  
Emergency emptying out  
The dangers of freezing  
17  
17  
17  
17  
17  
17  
18  
18  
Important Safety Information  
Your New Washing Machine  
2
4
Description of the Appliance  
Detergent dispenser drawer  
5
5
The Control Panel  
Programme information  
6-7  
7
Operating sequence  
Washing 4.5 kg of white cotton at 90°C  
Load the laundry  
8-11  
8
18  
Something Not Working  
Service and Spare Parts  
Guarantee Conditions  
19-20  
20  
8
8
8
8
8
8
9
9
9
9
9
9
Measure out the detergent  
Measure out the fabric softener  
Select the required programme  
Select spin speed reduction or no spin option  
Select the required option  
Start the programme  
Altering a programme  
Interrupting a programme  
Cancelling a programme  
Opening the door after the programme has started  
At the end of the programme  
21  
For the Installer  
Installation Instructions  
Technical Specifications  
22  
22  
Unpacking  
Positioning  
Water inlet  
Water drainage  
Levelling  
Special conditions  
In the interest of the environment  
Electrical connection  
23  
23  
24  
Washing 2 kg of mixed fabrics at 50°C  
Load the laundry  
Measure out the detergent and the fabric softener  
Select the required programme  
Select spin speed reduction or no spin option  
Select the required option(s)  
10  
10  
10  
10  
10  
10  
10  
11  
24-25  
25  
25  
26  
26  
Start the programme  
At the end of the programme  
Washing Hints  
Which detergent?....  
And in which form?  
12-13  
13  
13  
Wash Care Symbols  
Washing Programmes  
14  
15-16  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your New Washing Machine  
Your new washing machine meets all modern requirements for effective treatment of laundry  
with low water, energy and detergent consumption.  
G
The programme selector dial combines the  
In the interest  
function of programme and temperature selection,  
making it easier to set the programme.  
of the environment  
G
Materials marked with the symbol  
recyclable.  
are  
G
G
G
The programme progress display shows the  
washing phase and the end of the programme .  
G
G
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
The special wool programme with its new delicate  
wash system treats your woollens with extreme care.  
The ECO VALVE allows total use of detergent and  
reduces water consumption so saving energy.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door lock device  
unusable to prevent young children from being  
trapped inside.  
Ecological hints  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
G
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
G
Adjust the quantity of detergent according to the  
How do we help to protect the environment?  
We use recycled paper!  
hardness of your water supply, the amount of  
laundry and the degree of soiling.  
G
A programme without prewash is sufficient for  
normally soiled laundry.  
G
The machine works more economically if it is fully  
loaded.  
G
With adequate pre-treatment, stains and limited  
soiling can be removed; the laundry can then be  
washed at a lower temperature, so saving energy.  
Important  
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.  
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly  
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the  
wash load manually and select a spin programme. For more detailed information see the section headed "Something  
Not Working".  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the Appliance  
1 Detergent dispenser drawer  
2 Programme guide  
3 Control panel  
4 Door opening handle  
5 Drain pump  
6 Adjustable feet  
Detergent dispenser drawer  
Prewash  
Main wash  
Fabric softener  
C0069  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel  
1 Detergent dispenser drawer  
Programme Option buttons  
Depending on the programme, different functions can  
be combined. These must be selected after choosing the  
desired programme and before pressing the “start  
pause” button.  
When these buttons are pressed, the corresponding pilot  
lights come on. When they are pressed again, the pilot  
lights go out.  
If an incorrect option is selected, the corresponding  
pilot light flashes for about 2 seconds.  
4 Half Load button  
Select this button to reduce water consumption on the  
rinse cycle when washing a smaller load of cottons or  
linens (maximum load size = 2.25 kg).  
The machine will perform 2 rinses instead of 3.  
5 Rinse Hold button  
When selecting this option the water of the last rinse is  
not emptied out, to prevent the fabrics from creasing.  
At the end of the programme the pilot light “end”  
illuminate. To drain water, proceed as follows:  
G
turn the programme selector dial to position “O”;  
G
select programme 14 (drain) or 15 (spin). In this  
2
Spin reduction/no spin button  
case reduce the spin speed by means of the relevant  
button to adapt it to the fabrics to be spun.  
By pressing this button you can reduce the final and the  
intermediate spin speeds or select the “no spin” option:  
G
press “start pause” button.  
G
“spin reduction”: by selecting this option the speed  
will be reduced as follows:  
6 Start Pause button  
After having selected the required programme, press  
this button to start the machine; the corresponding pilot  
light stops flashing turning on constantly.  
Cotton: from 1000 to 500 r.p.m.  
Synthetics and wool: from 900 to 450 r.p.m.  
Delicates: from 700 to 450 r.p.m.  
G
“no spin”: by selecting this option all the spinning  
phases are suppressed. To be used for extremely  
delicate items.  
The machine will add 3 rinses on cotton  
programmes and 1 rinse on synthetic programmes.  
To interrupt a programme which is running, press the  
“start pause” button: the corresponding pilot light starts  
to flash.  
To restart the programme from the point at which it was  
interrupted, press the “start pause” button again.  
3 Prewash button  
7 Programme progress display  
By selecting the wash programme, the pilot lights  
corresponding to the various phases making up the  
programme come on.  
Select this option if you wish your laundry to be  
prewashed before the main wash (not available for wool).  
The prewash ends with a short spin in programmes for  
cotton and synthetic fabrics, whereas in the programme  
for delicate fabrics the water is only drained.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATTENTION!  
If you turn the programme selector dial to another  
programme when the machine is working, the lights of  
the programme progress display start to flash. The  
machine will not perform the new selected programme.  
Programme information  
After the machine has started, only the running phase  
pilot light stays on.  
10 = Wool  
When the pilot light “prewash/wash” comes on this  
means that the machine is performing the prewash or  
wash phase. If you have selected the “prewash”  
function, this light will be on during the prewash phase  
too.  
The wool wash cycle of this machine has been approved  
by Woolmark for the washing of machine washable  
Woolmark products provided that the garments are  
washed according to the instructions on the garment  
label and those issued by the manufacturer of this  
washing machine. M9604.  
The “end” pilot light flashes in the event of operating  
problems:  
12 = Quick and Cool  
- 4 flashes = the door has not been closed  
- 2 flashes = the machine does not empty  
- 1 flash = the machine does not fill  
This is a complete programme to be used for lightly  
soiled laundry or for laundry which needs freshening up  
(not available for wool).  
To eliminate the problem, see paragraph “Something not  
working”.  
Max load: 2. kg .  
When the light goes out, the door can be opened (see  
page 9).  
Washing temperature: 30°C  
Number of rinses: 2 .  
Programme duration: 30 minutes.  
Short spin at 700 r.p.m max.  
8 Programme selector dial  
13 = Rinses  
PROGRAMME  
1
15  
2
6
14  
With this programme is possible to rinse and spin  
garments which have been washed by hand.  
The machine performs 3 rinses, followed by a final  
short spin at the maximum speed that can be reduced  
selected by means of the relevant button.  
3
13  
12  
11  
4
5
10  
7
9
8
14 = Drain  
The selector dial can be turned either clockwise or  
anticlockwise.  
Position O corresponds to Reset programme / Switching  
OFF of the machine.  
For emptying out the water of the last rinse in programmes  
with the “rinse hold” option.  
Turn first the programme selector dial to O, then select drain  
programme 14 and depress the “start pause” button.  
15 = Spin  
Separate short spin for hand washed garments and after  
programmes with “rinse hold” option. Before selecting  
this programme the selector dial must be turned to “O”.  
You can choose the speed by means of the relevant  
button to adapt it to the fabrics to be spun.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Sequence  
Before the first wash, we recommend that you pour 2  
3. Select the required programme  
litres of water into the main wash compartment  
of  
Turn the programme selector dial to the programme 1.  
the detergent drawer in order to activate the ECO valve.  
Then run a cotton cycle at 60°C, without any laundry in  
the machine, to remove any manufacturing residue from  
the drum and tub.  
The light “start pause” starts to flash The pilot lights  
.
corresponding to the various phases making up the  
programme come on.  
Pour 1/2 a measure of detergent into the dispenser  
drawer and start the machine.  
PROGRAMME  
1
15  
2
6
14  
10  
3
13  
12  
11  
WASHING 4.5 KG OF WHITE COTTON AT 90°C  
4
5
Suppose you have 4.5 kg of heavy soiled laundry to  
wash. It is white cotton and is suitable for high  
temperature washing.  
7
9
8
1. Load the laundry  
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible. Close the door.  
4. Select “spin reduction” or  
no spin” option  
Press the option button repeatedly, to select the desired  
option. The relevant light illuminates.  
spin  
reduction  
no spin  
P0004  
2. Measure out the detergent  
and the fabric softener  
5. Select the required option  
Select “prewash” or “rinse hold” option if required, the  
Pull out the dispenser drawer until it stops.  
corresponding light illuminates.  
Measure out the amount of detergent required, pour it  
into the main wash compartment  
and into the  
compartment marked  
“prewash” option.  
If required, pour fabric softener into the compartment  
marked (the amount used must not exceed the  
“MAX” mark in the drawer). Close the drawer gently.  
if you have selected the  
prewash  
half  
rinse  
hold  
load  
C0070  
C0071  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Start the programme  
10.Opening the door after the  
programme has started  
First set the machine to pause by pressing the “start  
pause” button. Wait two or three minutes for the door  
lock to be released.  
Before starting up the machine check that:  
G
the appliance is plugged in  
G
the water supply tap is turned on  
G
the drain hose is correctly and securely positioned  
If the machine is already heating, or the water level is  
above the bottom edge of the door or that the drum is  
turning, it means that the door can not be opened.  
If you cannot open the door but you need to open it you  
have to switch the machine off by turning the selector  
dial to “O”. After about 2 or 3 minutes the door can be  
opened (pay attention to the water level and  
temperature!).  
G
the door and the detergent dispenser drawer are  
closed.  
To start the selected programme, press  
the “start pause” button; the corresponding light stops  
flashing.  
Only the “prewash/wash” light stays on.  
The machine starts operating.  
1
1. At the end of the programme  
The machine stops automatically.  
start  
pause  
If the “rinse hold” option has been selected, the phase  
light “end” light is on to indicate that the water must be  
emptied out before opening the door.  
To do this, first turn the programme selector dial to “O”  
and then to drain programme or spin programme  
14  
.
15  
Release of the lock is also indicated by the illumination  
of the “end” light.  
7. Altering a programme  
You can alter the programme before it starts.  
When the programme has started, you can only reset it  
by turning the programme selector dial to O and then  
you can select the new programme.  
Turn the programme selector dial to “O” to switch the  
machine off.  
Remove the laundry from the drum and carefully check  
that the drum is empty.  
If you do not intend to carry out another wash, close the  
water tap. Leave the door open to prevent the formation  
of mildew and unpleasant smells.  
The washing water remains in the tub.  
Start the new programme by pressing the  
start pause” button.  
8. Interrupting a programme  
Press the “start pause” button to interrupt a programme  
which is running, the corresponding light starts to flash.  
Press the button again to restart the programme.  
9.Cancelling a programme  
Turn the selector dial to O, in order to cancel a  
programme which is running. Now you can select a new  
programme.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
WASHING 2 KG OF MIXED FABRICS AT 50°C  
4. Select the required  
programme  
Suppose you have 2 kg of lightly soiled mixed fabrics to  
wash. They are rather delicate fabrics and should not be  
washed at a high temperature.  
Turn the programme selector dial to the programme 6.  
The “start pause” light starts to flash The pilot lights  
.
corresponding to the various phases making up the  
programme come on.  
1. Load the laundry  
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible. Close the door.  
PROGRAMME  
1
15  
2
6
14  
10  
3
13  
12  
11  
4
5
7
9
8
5. Select “spin reduction” or  
“no spin” option  
P0004  
Press the option button repeatedly, to select the desired  
option. The relevant light illuminates.  
2. Measure out the detergent  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent required and pour  
spin  
reduction  
it into the main wash compartment  
and into the  
no spin  
compartment marked  
if you have selected the  
prewash” option.  
6. Select the required option  
Select “prewash” or “rinse hold” option if required, the  
corresponding light illuminates.  
C0070  
prewash  
half  
rinse  
hold  
3. Measure out the fabric  
softener  
load  
If required, pour fabric softener into the compartment  
marked  
(the amount used must not exceed the  
“MAX” mark in the drawer).  
Close the drawer gently.  
7
. Start the programme  
Before starting up the machine check that:  
G
the appliance is plugged in  
G
the water supply tap is turned on  
G
the drain hose is correctly and securely positioned  
G
the door and the detergent dispenser drawer are  
closed.  
C0071  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To start the selected programme, press the “start pause”  
button; the corresponding light stops flashing.  
Only the “prewash/wash” pilot light stays on.  
The machine starts operating.  
start  
pause  
8. At the end  
of the programme  
The machine stops automatically.  
If the “rinse hold” option has been selected, the phase  
light “end” is on to indicate that the water must be  
emptied out before opening the door.  
To do this first turn the programme selector dial to “O”  
and then to drain programme 14 or spin programme  
In this case reduce the spin speed by means of the  
relevant button to adapt it to the fabrics to be spun.  
.
15  
Release of the lock is also indicated by the illumination  
of the “end” light.  
Turn the programme selector dial to “O” to switch the  
machine off.  
Remove the laundry from the drum and carefully check  
that the drum is empty.  
If you do not intend to carry out another wash, close the  
water tap.  
Leave the door open to prevent the formation of mildew  
and unpleasant smells.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Hints  
G
G
G
Do NOT overload the machine. Weigh the laundry the  
first few times you use the appliance.  
For wool, use gentle detergent only in small  
quantities.  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
The average weights of the most common items are  
listed below as a guide:  
Some stains such as fruit, wine, grass, rust etc. are  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
1000g = 1 kg  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Pillow case  
Tablecloth  
G
G
Only wool marked “Pure New Wool - washable,  
preshrunk” can be washed in the machine using the  
wool programme; other types of wool should be  
washed in HANDWASH programme.  
Serviette  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Man’s shirt  
Apron  
G
Once you have finished using the machine, you are  
advised to unplug it and turn off the water tap.  
G
Load the laundry loosely alternating large items with  
small ones.  
G
G
G
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they may  
unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
G
G
G
When washing curtains, remove the hooks.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
G
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
G
G
G
G
White items should not be washed with coloured  
items.  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Use a good quality detergent suitable for automatic  
washing machines.  
Use the correct quantities of detergent.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
And in which form?  
Not only are there different types of detergent, but they  
are also available in different forms. Whether you chose  
a powder or liquid in traditional or compact form is  
your own personal choice.  
Which detergent?....  
To ensure you obtain the best wash results from your  
appliance, it is important to use the right detergent in  
your everyday wash, and only detergents recommended  
for use in automatic machines.  
To maintain the appearance of your clothes and  
household textiles and to make them last longer you  
should use different types of detergent for different  
washes, whether for whites, colours or delicates.  
TRADITIONAL POWDERS  
Pour the powder directly into the dispenser drawer. Do  
not sprinkle powder onto clothes in the machine drum.  
TRADITIONAL LIQUIDS  
Liquid can be placed in the main wash compartment of  
the detergent drawer marked with the symbol  
the machine immediately upon placing the detergent in  
the dispenser drawer.  
Alternatively the detergent is measured into the  
specially designed dosing device* which should be  
placed on top of the laundry, and at the back of the  
machine drum.  
WHITES  
We recommend the Ariel product  
range which is biological and  
designed to provide excellent  
cleaning and stain removal even  
at low temperatures.  
, start  
NON BIOLOGICAL  
If you prefer to use a non  
biological detergent, which does  
not contain enzymes we  
recommend Fairy. Fairy provides  
good cleaning and stain removal.  
COMPACT POWDERS AND LIQUIDS  
Compact detergents (or concentrates as they are also  
known) are available in liquid or powder form, and  
generally require a smaller dosage. Follow the  
manufacturer’s instructions to ensure the most  
economical usage. Pour the detergent directly into the  
dispenser drawer, or alternatively measure the detergent  
into the specially designed dosing device* which  
should be placed on top of the laundry, and at the back  
of the machine drum.  
COLOUREDS  
For coloured items you should use a  
detergent which is designed to clean  
while maintaining the original colour.  
Ariel Color does not contain bleach  
and therefore helps to preserve  
colours.  
* If you use a dosing device in a washer dryer,  
please ensure the dosing device/ball is removed  
before carrying out a drying programme.  
DELICATE ITEMS  
FABRIC CONDITIONERS  
These are ideal for improving ‘softness’, and also  
reduce static cling on synthetics and make ironing  
easier. They are available in two types:  
When washing delicates such as  
woollens, you should use a product  
which is specially designed to care for  
fine fabrics.  
Dreft Automatic is suitable for  
woollens and other delicates.  
For example Lenor liquid fabric  
softener, for use in the washing  
machine/washer dryer. The  
liquid fabric softener should be  
poured into the compartment  
LAUNDRY BLEACH  
For additional stain removal you may  
wish to use a product such as Ace  
Gentle Bleach which is used in addition  
to your chosen detergent. Ace is  
suitable for all washable fabrics  
including silks, woollens and coloureds.  
marked with the symbol  
.
Follow the manufacturer’s dosage  
instructions and never exceed the  
MAX level.  
Bounce conditioning sheets for use  
in a tumble dryer. We recommend  
the conditioning sheets are pinned  
(using a safety pin) to an article  
of laundry and placed in the  
tumble dryer.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Care Symbols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
FABRIC  
White Cotton or Linen  
without Special Finishes  
Normal (Maximum)  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
Normal (Maximum)  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes,  
Cotton/Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Reduced (Medium)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Much Reduced (Minimum)  
Hand wash only  
Wool, wool mixtures, Silks  
Do not machine wash  
40  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
TUMBLE DRYING  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
Important Notes  
For best results, always use the dispenser drawer for  
dispensing detergents and liquid additives.  
Once the dispenser has been filled, close it by pushing it  
in gently. This is particularly important if you are using  
fabric conditioner to avoid the conditioner entering the  
machine prematurely.  
When using liquid detergent and a prewash programme,  
place the detergent into the correct compartment in the  
dispenser drawer, after the prewash has finished.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Programmes  
Programmes for cotton and linen  
Progr.  
time  
mins.  
Wash programme/  
Washing symbol  
Degree of soil  
and type of laundry  
Programme  
dial position  
Possible  
options  
Max.  
load  
Description  
PREWASH  
HALF LOAD  
RINSE HOLD  
SPIN RED.  
NO SPIN  
Wash at 90°C  
3 rinses  
Long spin  
For heavy soiled cotton  
items.  
140  
4.5 kg  
WHITES  
1
White cotton, for  
PREWASH  
HALF LOAD  
RINSE HOLD  
SPIN RED.  
NO SPIN  
example normally soiled  
work garments, sheets,  
household linen,  
Wash at 60 °C  
3 rinses  
Long spin  
2(*)  
4.5 kg  
4.5 kg  
120  
115  
ECO WASH  
underwear, towels.  
PREWASH  
HALF LOAD  
RINSE HOLD  
SPIN RED.  
NO SPIN  
Fast coloured cotton or  
linen fabrics, normally  
soiled, shirts,  
Wash at 60 °C  
3 rinses  
Long spin  
FAST  
COLOURS  
3
underwear, towels.  
PREWASH  
HALF LOAD  
RINSE HOLD  
SPIN RED.  
NO SPIN  
Non fast coloured  
Wash at 40 °C  
3 rinses  
Long spin  
NON FAST  
COLOURS  
cotton or linen fabrics,  
normally soiled, shirts,  
blouses, underwear.  
4.5 kg 113  
4
For cancelling the wash  
programme which is  
running and for  
switching the machine  
off  
RESET / OFF  
O
(*) This programme is the reference programme for the Energy label according to EEC Directive 92/75.  
The programme times are intended as a guide only. The actual time will vary depending on incoming water  
temperature and pressure.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Programmes  
Programmes for synthetics, mixed fabrics, delicates and wool  
Progr.  
time  
mins.  
Programme  
dial position  
Wash programme/  
Washing symbol  
Degree of soil  
and type of laundry  
Possible  
options  
Max.  
load  
Description  
Wash at 60 °C  
Wash at 50 °C  
Wash at 40 °C  
90  
85  
80  
5
6
7
Synthetic or mixed  
fabrics, underwear,  
coloured garments,  
non-shrink shirts,  
blouses.  
PREWASH  
RINSE HOLD  
SPIN RED.  
NO SPIN  
MIXED  
FABRICS  
2 kg  
2 kg  
3 rinses  
Short spin  
Wash at 40 °C  
Wash at 30 °C  
60  
55  
8
9
PREWASH  
RINSE HOLD  
SPIN RED.  
NO SPIN  
Delicate fabrics, for  
example curtains  
DELICATES  
3 rinses  
Short spin  
Specially tested  
programme for wool  
garments bearing the  
“Pure new wool, non-  
shrink, machine  
Wash at 30 °C  
3 rinses  
Short spin  
RINSE HOLD  
SPIN RED.  
NO SPIN  
WOOL  
50  
43  
1 kg  
1 kg  
10  
11  
washable” label.  
Cold wash  
3 rinses  
Short spin  
RINSE HOLD  
SPIN RED.  
NO SPIN  
Special programme for  
hand washing fabrics  
COLD WASH  
Special short  
Wash at 30 °C  
2 rinses  
Short spin  
RINSE HOLD  
SPIN RED.  
NO SPIN  
programme for lightly  
soiled synthetic, mixed  
fabrics and delicates  
QUICK  
AND COOL  
30  
30  
2 kg  
12  
13  
Separate rinse cycle for  
hand washed items of  
all fabric  
RINSE HOLD  
SPIN RED.  
NO SPIN  
3 rinses  
Short spin  
4.5 kg  
RINSES  
For emptying out the  
last rinse water in  
programmes with the  
rinse hold” option.  
-
14  
15  
O
DRAIN  
SPIN  
Draining of water  
Short spin  
4
Separate spin for  
all fabric  
SPIN RED.  
4.5 kg 1,5  
For cancelling the  
wash programme  
which is running and  
for switching the  
machine off  
RESET / OFF  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Before any maintenance or cleaning is carried out you  
must DISCONNECT the appliance from the electricity  
supply.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
machine. Do this separately from any laundry washing,  
C0073  
C0072  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
Cleaning the drawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
After each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Maintenance Wash  
With the use of low temperature washes it is possible to  
get a build up of residues inside the drum.  
We recommend that a maintenance wash be performed  
on a regular basis.  
P0038  
To run a maintenance wash:  
G
The drum should be empty of laundry.  
Cleaning the pump  
G
Select the hottest cotton wash programme.  
The pump should be inspected regularly and particularly  
G
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
if  
• the machine does not empty and/or spin  
• the machine makes an unusual noise during draining  
due to objects such as safety pins, coins etc. blocking  
the pump.  
External cleaning  
Clean the exterior cabinet of the appliance with a  
solution of mild washing up liquid and water only, and  
then dry thoroughly.  
Proceed as follows:  
• Disconnect the appliance.  
• If necessary wait until the water has cooled down.  
• Open the pump door.  
Cleaning the dispenser drawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to remove  
any traces of accumulated powder.  
To aid cleaning, the top part of the additive  
compartment should be removed.  
P1114  
• Place a container close to the pump to collect any  
spillage.  
• Pull out the emergency emptying hose, place it in the  
container and remove its cap.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• When no more water comes out, unscrew the pump  
cover and remove it. Always keep a cloth nearby to  
dry up spillage of water when removing the cover.  
Clean the filter using a hard bristle brush.  
Tighten up the inlet hose.  
P1090  
P1115  
The dangers of freezing  
Remove any objects from the pump impeller by  
rotating it.  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
G
Turn off the water tap.  
G
Unscrew the inlet hose.  
G
Place the end of the emergency emptying hose and  
that of the inlet hose in a bowl placed on the floor  
and let water drain out.  
G
Screw the water inlet hose back on and reposition  
the emergency emptying hose after having put the  
cap on again.  
• Put the cap back on the emergency emptying hose and  
place the latter back in its seat.  
G
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
Important!  
Every time you drain the water through the emergency  
emptying hose you must pour 2 litres of water into the  
main wash compartment of the detergent drawer and  
then run the drain programme. This will activate the  
ECO valve avoiding that part of the detergent remains  
unused at next washing.  
P1117  
• Screw the pump cover fully in.  
• Close the pump door.  
Emergency emptying out  
If the water is not discharged, proceed as follows to  
empty out the machine:  
Warning  
• pull out the plug from the power socket;  
• close the water tap;  
When the appliance is in use and depending on the  
programme selected there can be hot water in the pump.  
Never remove the pump cover during a wash cycle,  
always wait until the appliance has finished the cycle,  
and is empty. When replacing the cover, ensure it is  
securely retightened so as to stop leaks and young  
children being able to remove it.  
• if necessary, wait until the water has cooled down;  
• open the pump door;  
• place a bowl on the floor and place the end of the  
emergency emptying hose into the bowl. Remove its  
cap. The water should drain by gravity into the bowl.  
When the bowl is full, put the cap back on the hose.  
Empty the bowl. Repeat the procedure until water  
stops flowing out;  
Cleaning the water inlet filter  
If your water is very hard or contains traces of lime  
deposit, the water inlet filter may become clogged.  
• clean the pump if necessary as previously described;  
It is therefore a good idea to clean it from time to time.  
Turn off the water tap. Unscrew the water inlet hose.  
• replace the emergency emptying hose in its seat after  
having plugged it;  
• screw the pump cover again and close the door.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out  
an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.  
During machine operation it is possible that the “end” light flashes to indicate that the machine is not working.  
• 4 flashes = door open  
• 2 flashes = the water is not drained  
• 1 flash = there is no water filling  
Once the problem has been eliminated, press the “start pause” button to restart the programme. If after all checks, the  
problem persists, contact your local Service Centre.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
Symptom  
The machine does not start  
Possible causes  
G
The door has not been closed.  
G
The plug is not properly inserted in the power socket.  
There is no supply at the socket  
The main fuse or the fuse in the plug has blown.  
G
G
G
The selector dial is not correctly positioned and the “start pause”  
button has not been pressed.  
G
Ensure the water tap is open.  
The filter in the inlet hose is blocked.  
The inlet hose may be squashed or kinked.  
The door has not been closed.  
The machine does not fill  
G
G
G
G
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine fills then empties  
immediately  
G
G
G
The machine does not empty and/or  
does not spin  
The drain hose may be squashed or kinked.  
The “rinse hold” or “no spin” option has been selected.  
The drain pump may be blocked.  
The drain hose extension, if fitted, is not correct. Follow the  
G
G
G
instructions for connecting to the waste.  
The drainage system pipes are blocked.  
The wash load is unbalanced: redistribute the clothes inside the drum to  
G
G
allow the machine to spin.  
G
Too much detergent or unsuitable detergent has been used (creates too  
much foam).  
Check whether there are any leaks from one of the inlet hose fittings. It  
There is water on the floor  
G
is not always easy to see this as the water runs down the hose; check to  
see if it is damp.  
The drain hose may be damaged or not securely positioned.  
The detergent dispenser drawer or recess is clogged.  
The drainage system pipes are blocked.  
G
G
G
G
The cap on the emergency emptying hose has not been replaced after  
cleaning the filter.  
G
Unsatisfactory washing results  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme has not been selected.  
Too much laundry has been placed in the drum.  
G
G
G
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Possible causes  
G
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not stable and level (check diagonally).  
The washing load is badly distributed in the drum.  
The machine vibrates when spinning  
G
G
G
G
Maybe there is very little laundry in the drum.  
G
The programme is still running.  
Water in the tub: the door cannot be opened if water is present in the  
The door will not open  
G
tub.  
G
The electronic balance control device has cut in because the laundry is  
Spinning starts late or the machine  
does not spin  
not evenly distributed in the drum. The laundry is redistributed by  
reverse rotation of the drum. This may happen several times before the  
unbalance disappears and normal spinning can resume. If, after 10  
minutes, the laundry is still not evenly distributed in the drum, the  
machine will not spin. In this case, redistribute the load manually and  
reselect the spin programme.  
G
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor ensures  
a softer start and more even distribution of the laundry in the drum  
when spinning, as well as increased stability of the machine.  
G
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
Service & Spare Parts  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Bendix Service Force Centre by telephoning:  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The model and serial number of the appliance (found  
on the rating plate - see picture).  
5. The purchase date  
0870 5 929929  
Your telephone call will be automatically routed to the  
Service Force Centre covering your post code area.  
For the address of your local Service Force Centre and  
further information about Service Force, please visit the  
Please note that a valid purchase receipt or  
guarantee documentation is required for in-  
guarantee service calls  
For Customer Service in Ireland please contact us at the  
address below:  
Bendix  
Electrolux Group (Irl) Ltd  
Long Mile Road  
Dublin 12  
Mod.  
..........  
Ser.  
Republic of Ireland  
Tel: +353 (0)1 4090752  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Care Department  
Bendix  
55-77 High Street  
Slough  
Customer Care  
For general enquiries concerning your Bendix appliance  
or for further information on Bendix products, please  
contact our Customer Care Department by letter or  
telephone as follows:  
Berkshire  
SL1 1DZ  
Tel 08705 950 950*  
* calls to this number may be recorded for training  
purposes.  
Guarantee Conditions  
Standard guarantee conditions  
G
Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
We, Bendix undertake that if, within 12 months of the  
date of the purchase, this Bendix appliance or any part  
thereof is proved to be defective by reason only of  
faulty workmanship or materials, we will, at our option,  
repair or replace the same FREE OF ANY CHARGE  
for labour, materials or carriage on condition that:  
G
Products of Bendix manufacture which are NOT  
marketed by Bendix.  
G
The appliance has been correctly installed and used  
only on the electricity supply stated on the rating  
plate.  
European guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new home  
subject to the following qualifications:  
G
The appliance has been used for normal domestic  
purposes only, and in accordance with the  
manufacturer’s instructions.  
The guarantee starts from the date you first  
G
purchased your product.  
G
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
The guarantee is for the same period and to the same  
G
extent for labour and parts as exists in the new  
country of use for this brand or range of products.  
All service work under this guarantee must be  
undertaken by a Bendix Service Force Centre.  
The guarantee relates to you and cannot be  
G
transferred to another user.  
Any appliance or defective part replaced shall become  
the Company’s property.  
Your new home is within the European Community  
G
(EC) or European Free Trade Area.  
This guarantee is in addition to your statutory and other  
legal rights.  
The product is installed and used in accordance with  
G
our instructions and is only used domestically, i.e. a  
normal household.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
The product is installed taking into account  
G
regulations in your new country.  
Before you move please contact your nearest Customer  
Care Centre, listed below, to give them details of your  
new home. They will then ensure that the local Service  
Organisation is aware of your move and able to look  
after you and your appliances.  
Exclusions  
This guarantee does not cover:  
G
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
France  
Germany  
Italy  
Senlis  
+33 (0)344 62 29 29  
+49 (0)800 234 7378  
+39 (0)439 39 47 00  
+46 (0)8 672 53 90  
+44 (0)1753 219898  
Nurnberg  
Pordenone  
Stockholm  
Slough  
G
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
Sweden  
UK  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Should the appliance power supply cable need to  
be replaced, this should be carried out by our  
Service Force Centre.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm  
60 cm  
60 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2100 W (10A)  
WATER PRESSURE  
Minimum  
Maximum  
50 kPa (0,5 bar)  
800 kPa (0,8 bar)  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
Delicate fabrics  
Wool  
4.5 kg  
2.0 kg  
2.0 kg  
1.0 kg  
SPIN SPEED  
Maximum  
1000 rpm  
CONSUMPTION DATA FOR WASHING  
4.5 KG NORMALLY SOILED COTTON  
ITEMS AT 60°C (PROGR. ECO WASH)  
Energy  
Water  
0.76 kWh  
49 litres  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
I
Plug the 3 holes with the plastic plugs which you  
can find in the envelope containing the instruction  
booklet.  
All transit bolts and packing must be removed  
before using the appliance  
You are advised to keep all the packaging for re-use in  
case the appliance has to be transported again.  
I
Unscrew and remove the three rear transit bolts  
(using a spanner).  
P0002  
Important !  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
P0287  
In case of moving out the same precautions as per  
paragraph “The dangers of freezing” must be taken i.e.  
the residual water in the hoses must be pumped out.  
I
Lay the machine gently on its back, making sure  
that the hoses are not squashed.  
We suggest a polystyrene angle bracket from the  
packing is placed on the floor before tilting it back  
to avoid the hoses being squashed.  
Positioning  
Install the machine on a flat hard floor.  
Make sure that air circulation around the machine is not  
impeded by carpets, rugs etc. Check that the machine  
does not touch the wall or other kitchen units.  
Never place cardboard, wood or similar materials under  
the machine to compensate for any unevenness in the  
floor.  
I
Carefully remove the polyethylene bags located at  
the base of the machine by pulling them toward the  
centre of the machine.  
Your new washing machine has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to suitable existing tap with the drain  
hose discharging into a sink.  
1
2
The appliance has one inlet hose, with female 3/4” BSP  
thread connector. If this connection is not compatible  
with the plumbing of the existing installation, a variety  
of connectors are available from good hardware stores  
and plumbers merchants to suit most domestic  
plumbing. Any alteration to your existing plumbing  
must be carried out by a competent person, or qualified  
plumber.  
AL009  
P0018  
I
Place the machine in an upright position and  
remove the three plastic spacers.  
Installation on a Suspended Floor  
Suspended wooden floors are particularly susceptible to  
vibration. To help prevent vibration we recommend you  
place a waterproof wood panel, at least 15 mm thick  
under the appliance, secured to at least 2 floor beams  
with screws. If possible install the appliance in one of  
the corners of the room, where the floor is more stable.  
P0001  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water inlet  
Water drainage  
This appliance is designed to be permanently plumbed  
into your home's drainage system using one of the  
following methods.  
Connect the hose to a tap with a 3/4” thread.  
Do not use previously used hoses for water connection.  
1. Into a drainage standpipe.  
Firstly form a hook in the end of the drain hose using  
the “U” piece” supplied.  
P1088  
Installation should comply with local water authority  
and building regulations’ requirements.  
U” piece  
supplied  
The appliance must be connected to a cold water  
supply.  
P1199  
A minimum water pressure of 50 kPa (0.5 bar) is  
required for safe operation of the appliance.  
Place the drain hose into your standpipe, which should  
have an internal diameter of approximately 38mm thus  
ensuring there is an air break between the drain hose  
and standpipe.  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
38 mm (11.2”)  
standpipe  
diameter  
There should be a minimum distance of 5.02m  
(16.5 ft) between the appliance’s inlet and the bottom of  
the water storage tank.  
Set the hose correctly by loosening the ring nut. After  
positioning the inlet hose, be sure to tighten the ring nut  
again to prevent leaks.  
P1074  
When discharging into a standpipe ensure that the top of  
the standpipe is no more than 90cm (35.4'') and no less  
than 60cm (23.6'') above floor level.  
3 pin  
P0021  
P1039  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Onto a sink outlet spigot.  
Levelling  
Level the washing machine by raising or lowering the  
feet. The feet may be tight to adjust as they incorporate  
a self locking nut, but the machine MUST be level and  
stable.  
If the outlet spigot has not been used before, remove  
any blanking plug that may be in place.  
P1197  
Push the drain hose onto the spigot and secure with a  
clip if required, ensure a loop is formed in the drain  
hose (see diagram) to prevent waste from the sink  
entering the washing machine.  
P0254  
P0509  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation.  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
Loop  
P1198  
Special conditions  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
Important  
Warning  
Before connecting up the machine to new pipework or  
to pipework that has not been used for some time, run  
off a reasonable amount of water to flush out any debris  
that may have collected in the pipes.  
The machine should NOT be placed on deep pile  
carpeting.  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The wires in the mains lead are coloured in accordance  
with the following code:  
In the interest of the  
environment  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
It is essential that these appliances are not connected to  
the surface water drainage system as this water is  
discharged directly into a river or stream and may cause  
pollution. If you require any further advice please  
contact your local water authority.  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
The wire coloured green and yellow must be connected  
to the terminal marked with the letter «E» or by the  
earth symbol  
or coloured green and yellow.  
The wire coloured blue must be connected to the  
terminal marked «N» or coloured black.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray strands  
of wire present and the cord clamp must be secure over  
the outer sheath.  
The manufacturer declines any liability should  
this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
WARNING:  
A cut off plug inserted into a 13 amp socket is  
a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
Mod.  
..........  
Ser.  
Should the appliance power supply cable need to be  
replaced, this should be carried out by our Service  
Force Centre.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363A) fuse  
must be used.  
Note  
When the appliance is installed the power supply cable  
must be accessible.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
Permanent connection  
In the case of permanent connection it is necessary that  
you install a double pole switch between the appliance  
and the electricity supply (mains), with a minimum gap  
of 3mm between the switch contacts and of a type  
suitable for the required load in compliance with the  
current electrical regulations.  
The switch must not break the yellow and green earth  
cable at any point.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bendix, 55-77 High Street, Slough, Berkshire SL1 1DZ  
Consumer care telephone number 08705 950 950  
The Electrolux Group is the worldÑs largest producer of powered appliances for kitchen,  
cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers,  
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD  
in more than 150 countries around the world.  
Electrolux plc 2004/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Blood Pressure Monitor 7009 User Manual
Teledyne TV Converter Box 3190 User Manual
Tokina Camera Accessories TM7Z0818GAIDC User Manual
Toshiba Cordless Telephone SX 2981 User Manual
Tricity Bendix Refrigerator FD 792 User Manual
Turbosound Portable Speaker NuQ SERIES User Manual
Uniden Scanner APCO 25 User Manual
ViewSonic Car Video System VA1903wb User Manual
ViewSonic Projector VS14116 User Manual
Weber Charcoal Grill 30185 User Manual