Tricity Bendix Washer BIW 100 User Manual

OPERATING & INSTALLATION  
INSTRUCTIONS  
WASHING MACHINE  
BIW 100  
35.292.629/0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Im portant Safety Inform ation  
It is most important that this instruction book should be retained with the appliance for future reference.  
Should the appliance be sold or transferred to another owner, or should you move house and leave the  
appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to  
know the functioning of the appliance and the relevant warnings.  
This information has been provided in the interest of safety. You MUST read it carefully before installing or  
using the appliance.  
Inst allat io n  
Du r ing Use  
This appliance is heavy. Care should be taken when  
Always unplug the appliance and turn off the water after use.  
moving it.  
Do not overload the appliance. See relevant section in  
It is dangerous to alter the specifications or attempt to  
instruction book.  
modify this product in any way.  
Always look through the glass door to check if water has  
All packing and transit bolts must be removed before  
drained before opening the door.  
use. Serious damage can occur to the product and to  
property if this is not adhered to. See relevant section in  
instructions.  
The user should always check that they have not left their  
gas lighter (disposable or otherwise) in their clothing  
Only wash fabrics which are designed to be machine  
washed. If in doubt, consult the care label on the clothes.  
Any plumbing work required to install this appliance  
should be carried out by a qualified plumber or  
competent person.  
Before washing, ensure that all pockets are empty and  
buttons and zips are fastened. Avoid washing frayed or torn  
articles and treat stains such as paint, ink, rust, and grass  
before washing. Underwired bras must NOT be machine  
washed.  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
Care must be taken to ensure that the appliance does not  
stand on the electrical supply cable.  
Any objects such as coins, safety pins, nails, screws, stones  
or any other hard, sharp material can cause extensive  
damage and must not be placed into the machine.  
If the machine is situated on a carpeted floor, please  
adjust the feet in order to allow air to circulate freely.  
Garments which have been in contact with volatile  
The washing machine must be unplugged when  
petroleum products should not be machine washed. If  
volatile cleaning fluids are used, care should be taken to  
ensure that the fluid is removed from the garment before  
placing in the machine.  
removing the interior transit bolts. Do not plug in the  
appliance before finishing the removal of the transit  
bolts and the fixing of the caps in the holes where the  
security bolts were  
Wash small items such as socks, laces, washable belts etc in  
a washing bag or pillow case as it is possible for such items  
to slip down between the tub and the inner drum.  
Child Safet y  
Only use the advised quantities of fabric softener. Damage to  
the fabric can ensue if you over-fill. Refer to the  
manufacturer’s recommendations of quantities.  
This appliance is designed to be operated by adults.  
Children should not be allowed to tamper with the  
controls or play with the product.  
As some duvets and eiderdowns should be washed in large  
Pets and children have been known to climb into  
commercial machines because of their bulk, please check  
with the manufacturer of the item before washing in a  
domestic machine.  
washing machines. Please check your drum before use.  
The glass door becomes very hot during the washing  
cycle. Keep children away from the vicinity of the  
appliance whilst it is in operation.  
Leave the porthole door slightly ajar between washes to  
preserve the door seal.  
Keep all packaging well away from children.  
Under no circumstances should you attempt to repair the  
Keep all detergents in a safe place out of children’s  
machine yourself. Repairs carried out by inexperienced  
persons may cause injury or serious malfunctioning. Contact  
your local Bendix Service Centre. Always insist on genuine  
Bendix spare parts.  
reach.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Fo r t he User  
Fo r t he Inst aller  
Im portant Safety Inform ation  
Your New Washing Machine  
Description of the Appliance  
The Control Panel  
3
5
Installation Instructions  
25  
Technical Specifications  
Unpacking  
Positioning  
Water inlet  
Water drainage  
25  
26  
27  
27  
28  
29  
29  
29  
30  
30  
6
7
Operating sequence  
Washing 4,5 kg of white cotton at 90 °C  
Load the laundry  
Measure out the detergent  
Measure out the additive  
Select the required option(s)  
Select the required programme  
Start the machine  
8-11  
Levelling  
8
8
8
8
8
9
9
9
Special conditions  
In the interest of the environment  
Electrical connections  
Permanent connection  
At the end of the programme  
Washing 2 kg of mixed fabrics at 50 °C  
Load the laundry  
Measure out the detergent  
Measure out the additive  
Select the required option(s)  
Select the required programme  
Start the machine  
10  
10  
10  
10  
10  
11  
11  
11  
At the end of the programme  
Washing Hints  
Which detergent to use?....  
And in which form?  
12-14  
13  
14  
How much detergent and fabric softener?  
Using a water softening agent  
14  
14  
Wash Care Sym bols  
15  
Washing Program m es  
16-17  
Maintenance and Cleaning  
Descaling  
After each wash  
18-19  
18  
18  
External cleaning  
18  
18  
18  
19  
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the filter  
The dangers of freezing  
Maintenance Wash  
19  
19  
Som ething Not Working  
Service & Spare Parts  
Custom er Care  
20-21  
21  
21  
Guarantee conditions  
Bendix Service Force Addresses  
22  
23-24  
Gu id e t o u se t he Inst r u ct io n Bo o k  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
i
Hints and tips  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your New Washing Machine  
i
Your new washing m achine, m eets all m odern needs for effective treatm ent of laundry with low  
water, energy and detergent consum ption.  
Automatic cooling of the wash water to 60°C  
before draining, with the 90°C programme. This  
reduces thermal shock to fabrics, helping to prevent  
any creasing.  
In t he int erest o f t he  
enviro nm ent  
Materials marked with the symbol  
recyclable.  
are  
The special wool programme with its new delicate  
wash system treats your woollens with extreme  
gentleness.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
The anti-unbalance device ensures that the washing  
machine remains stable when spinning.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door closing  
device unusable to prevent young children from  
being trapped inside.  
Eco logical hint s  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Adjust the quantity of detergent according to the  
How do we help to protect the environm ent?  
We use recycled paper!  
hardness of your water supply, the amount of  
laundry and the degree of soiling.  
A programme without prewash is sufficient for  
normally soiled laundry.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the Appliance  
1 Detergent dispenser drawer  
2 “Mains-on” light  
3 “Options” buttons  
4 Programme guide  
5 Program selector dial & ON/OFF switch  
6 Door opening handle  
7 Filter  
8 Adjustable feet  
Det ergent d isp enser d rawer  
Prewash  
Main Wash  
Fabric softener  
AL035  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel  
1 Det ergent d isp enser d rawer  
4 HALF LOAD b u t t o n  
Available for programmes 1 to 5.  
Pressing this button before starting the programme there  
will be one rinse less which saves energy and water.  
2 Mains-o n light  
This light illuminates when the appliance is operating.  
5 Program m e Gu id e  
3 RIN SE HOLD b u t t o n  
Press this button to make the machine stop with water in  
the drum after the synthetic or delicate wash cycles.  
This prevents any creasing which may take place if the  
clothes are left damp in the drum. When it is convenient  
for you to empty the machine, simply press this button  
again so that the machine can proceed to drain and short  
spin, or turn the dial to the drain programme “14”. If  
this button is not activated, the washing programmes  
will end with a short spin.  
6 Program m e Select o r  
To select the required program turn the control  
clockwise until the marker on the top coincides with the  
number of the required programme. If you pass the  
required number NEVER TURN THE CONTROL  
ANTICLOCKWISE just continue clockwise until the  
required number is reached again.  
Do not press this button for woollens: wool items  
should be gently spun.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Sequence  
Before your first wash, we recommend that you run a  
cotton cycle at 60°C, without any laundry in the  
machine, to remove any manufacturing residue from the  
drum and tub.  
Pour 1/2 a measure of detergent into the dispenser  
drawer and start the machine.  
WASHING 4.5 KG OF WHITE COTTON AT 90°C  
Suppose you have 4.5 kg of heavily soiled laundry to  
wash. It is white cotton and is suitable for high  
temperature washing  
1. Lo ad t he lau nd r y  
Open the door.  
Place the laundry in the drum, one item at a time,  
shaking out as much as possible. Close the door.  
P0004  
2. Measu re o u t t he d et ergent  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent recommended by  
the manufacturer in a graduated cup and pour it into the  
main wash compartment  
.
If you wish to carry out a prewash(*), pour detergent  
into the compartment marked  
(*) Prewash is available in programme “1”.  
AL025  
3. Add t he fab r ic so ft ener  
(if req u ired )  
If required, pour fabric softener into the compartment  
marked  
(the amount used must not exceed the  
«MAX» mark in the drawer).  
Close the drawer gently  
AL023  
4. Select t he req u ired o p t io n(S)  
Depress HALF LOAD button if required.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Select t he required program m e  
Turn the programme selector dial CLOCKWISE to the  
1
required programme.  
AL040  
6. St ar t t he m achine  
Before starting up the machine check that:  
1
the appliance is plugged in  
the water supply taps are turned on  
the door and the detergent dispenser drawer are  
closed.  
Pull the programme selector dial outwards  
The operating pilot light will illuminate and the machine  
will start operating  
AL041  
7. At t he end o f t he p rogram m e  
The machine stops automatically and the mains-on light  
goes out.  
The door is controlled by a safety device which releases  
3 minutes after the end of the programme.  
Before opening the door ensure there is no water in  
the drum.  
Switch the machine off by pushing in the programme  
selector dial.  
When the programme has finished, you are advised to  
unplug the appliance and turn off the water taps.  
Leave the door open to prevent the formation of mildew  
and unpleasant smells.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
WASHING 2 KG OF MIXED FABRICS AT 50 °C  
Suppose you have 2 kg of MIXED FABRICS to wash.  
They are rather delicate fabrics and should not be  
washed at a high temperature.  
1. Lo ad t he lau nd r y  
Open the door.  
Place the laundry in the drum, one item at a time,  
shaking out as much as possible. Close the door.  
P0004  
2. Measu re o u t t he d et ergent  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent recommended by  
the manufacturer in a graduated cup and pour it into the  
main wash compartment  
.
AL025  
3. Add t he fab r ic so ft ener  
(if req u ired )  
If required, pour fabric softener into the compartment  
marked  
(the amount used must not exceed the  
«MAX» mark in the drawer).  
Close the drawer gently.  
AL023  
4. Select t he req u ired o p t io n(S)  
Depress RINSE HOLD button  
,if required  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Select t he required program m e  
Turn the programme selector dial CLOCKWISE to the  
required programme  
7
AL040  
6. St ar t t he m achine  
Before starting up the machine check that:  
7
the appliance is plugged in  
the water supply taps are turned on  
the door and the detergent dispenser drawer are  
closed.  
Pull the programme selector dial outwards  
The mains-on light will illuminate and the machine will  
start operating  
AL041  
7. At t he end o f t he p rogram m e  
The machine stops automatically and the mains-on light  
goes out.  
If you have depressed the RINSE HOLD button  
,
the machine will stop with the water left in the tub, to  
prevent the fabric from creasing. To drain the water  
release the same button (the clothes will be gently  
spun) or select programme “14”  
The door is controlled by a safety device which releases  
3 minutes after the end of the programme.  
Before opening the door ensure there is no water in  
the drum.  
Switch the machine off by pushing in the programme  
selector dial.  
When the programme has finished, you are advised to  
unplug the appliance and turn off the water taps  
Leave the door open to prevent the formation of mildew  
and unpleasant smells.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Hints  
i
Do NOT overload the machine. Weigh the laundry the  
Some stains such as fruit, wine, grass, rust etc. are  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
first few times you use the appliance.  
The average weights of the most common items are  
listed below as a guide:  
1000g = 1 kg  
Only wool marked «Pure New Wool - washable,  
preshrunk» can be washed in the machine using the  
wool programme; other types of wool should be  
washed by hand or dry cleaned.  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Pillow case  
Tablecloth  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Serviette  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
Once you have finished using the machine, you are  
advised to unplug it and turn off the water taps.  
To avoid an excessive and damaging amount of  
lather when washing net curtains, it is advisable to  
wash large curtains singularly and take extra care  
when measuring the detergent.  
Man’s shirt  
Apron  
Should an excess of lather accidentally occur, switch  
off the machine, select the spin programme which is  
preceded by a drain cycle, to remove the lather and  
then start the wash again.  
Load the laundry loosely alternating large items with  
small ones.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they may  
unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
When washing curtains, remove the hooks.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
White items should not be washed with coloured  
items.  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Use a good quality detergent suitable for automatic  
washing machines.  
Use the correct quantities of detergent.  
For wool, use gentle detergent only in small  
quantities.  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delicate Item s  
Which d et ergent t o u se?....  
When washing delicates such as woollens, you should  
use a product which is specially designed to care for  
fine fabrics. Dreft Automatic is suitable for woollens  
and other delicates.  
To ensure you obtain the best wash results from your  
appliance, it is important to use the right detergent in  
your everyday wash, and only detergents recommended  
for use in automatic machines.  
To maintain the appearance of your clothes and  
household textiles and to make them last longer you  
should use different types of detergent for different  
washes, whether for whites, colours or delicates.  
Whites  
We recommend the Ariel product range which is  
biological and designed to provide excellent cleaning  
and stain removal even at low temperatures.  
Laundry Bleach  
For additional stain removal you may wish to use a  
product such as Ace Gentle Bleach which is used in  
addition to your chosen detergent. Ace is suitable for all  
washable fabrics including silks, woollens and  
coloureds.  
Non Biological  
If you prefer to use a non biological detergent, which  
does not contain enzymes we recommend Fairy. Fairy  
provides good cleaning and stain removal.  
Coloureds  
For coloured items you should use a detergent which is  
designed to clean while maintaining the original colour.  
Ariel Color does not contain bleach and therefore helps  
to preserve colours.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bounce conditioning sheets for use in a tumble dryer.  
We recommend the conditioning sheets are pinned  
(using a safety pin) to an article of laundry and placed in  
the tumble dryer.  
And in w hich fo r m ?  
Not only are there different types of detergent, but they  
are also available in different forms. Whether you  
choose a powder or liquid in traditional or compact form  
is down to personal choice.  
Traditional Powders  
Pour the powder directly into the dispenser drawer. Do  
not sprinkle powder onto clothes in the machine drum.  
Traditional Liquids  
Liquid can be placed in the main wash compartment of  
the detergent drawer marked with the symbol  
, start  
the machine immediately upon placing the detergent in  
the dispenser drawer.  
How m u ch d et ergent and fab r ic  
so ft ener ?  
The amount to be used depends on:  
the load:  
Alternatively the detergent is measured into the specially  
designed dosing device* which should be placed on top  
of the laundry, and at the back of the machine drum.  
Com pact Powders and Liquids  
if the detergent manufacturer does not make any  
specification for small loads, use a third less for half  
loads, and for very small loads only use half of the  
amount of washing powder recommended for a full  
load.  
Compact detergents (or concentrates as they are also  
known) are available in liquid or powder form, and  
generally require a smaller dosage. Follow the  
manufacturer’s instructions to ensure the most  
economical usage. Pour the detergent directly into the  
dispenser drawer, or alternatively measure the detergent  
into the specially designed dosing device* which should  
be placed on top of the laundry, and at the back of the  
machine drum.  
the degree of soiling of the washing:  
for only lightly soiled washing use less washing  
powder. Follow the instructions of the detergent  
manufacturer.  
the water hardness:  
*If you use a dosing device in a washer dryer,  
please ensure the dosing device/ball is removed  
before carrying out a drying programme.  
the harder the water, the higher the dosage!  
Using a wat er so ft ening agent  
In hard water areas, the use of a water softening agent  
can reduce the amount of detergent necessary. See  
manufacturers recommendations.  
Fabric Conditioners  
These are ideal for improving “softness”, and also  
reduce static cling on synthetics and make ironing easier.  
They are available in two types:  
For example Lenor liquid fabric softener, for use in the  
washing machine/washer dryer. The liquid fabric  
softener should be poured into the compartment marked  
with the symbol  
.
Follow the manufacturer’s dosage instructions and never  
exceed the MAX level.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Care Sym bols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
FABRIC  
White Cotton or Linen  
without Special Finishes  
Normal (Maximum)  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colour fast at 60°C.  
Normal (Maximum)  
60  
50  
Nylon, Polyester/Cotton, Viscose  
Reduced (Medium)  
Normal (Maximum)  
Reduced (Medium)  
with  
Special  
Finishes,  
Cotton/Acrylic Mix.  
Cotton, Linen or Viscose  
Colour fast at 40°C but not 60°C.  
40  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Much Reduced (Minimum)  
Hand wash only  
Wool, wool mixtures, Silks  
Do not machine wash  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
P
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
TUMBLE DRYING  
May be tumble dried  
with high heat setting  
with low heat setting  
A cross through any symbol means «DO NOT»  
X
Im p o r t ant N o t es  
For best results, always use the dispenser drawer for dispensing detergents and liquid additives.Once the dispenser has  
been filled, close it by pushing it in gently. This is particularly important if you are using fabric conditioner to avoid  
the conditioner entering the machine prematurely.  
When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the  
dispenser drawer, after the prewash has finished.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Program m es  
Program m es fo r co t t o n and linen  
Degree of soil and type Programme dial  
Wash programme  
Possible Max.  
Description  
of laundry  
position  
options  
load  
White cotton, for  
example heavy soiled  
Prewash at 40 ˚C  
Wash at 90˚C  
4 rinses  
Pre-wash &  
Whites  
HALF  
LOAD  
1
garments,  
household  
sheets,  
linen,  
4.5 kg  
Long spin at 1000 rpm  
underwear, towels.  
White cotton, for  
example normally soiled  
Wash at 90˚C  
4 rinses  
Long spin at 1000 rpm  
HALF  
LOAD  
garments,  
household  
sheets,  
linen,  
4.5 kg  
Whites  
2
underwear, towels.  
Fast coloured cotton or  
linen fabric, shirts,  
Wash at 60˚C  
4 rinses  
Long spin at 1000 rpm  
HALF  
LOAD  
4.5 kg  
4.5 kg  
Fast Coloureds  
3 (*)  
underwear,  
towels.  
(normally soiled)  
Non fast coloured cotton  
or linen fabrics, shirts,  
blouses, underwear.  
Wash at 40˚C  
4 rinses  
Long spin at 1000 rpm  
Non fast  
HALF  
LOAD  
4
5
6
coloureds  
HALF  
LOAD  
Separate rinse cycle for  
hand washed garments.  
4 rinses  
Long spin at 1000 rpm  
4.5 kg  
4.5 kg  
Hand Rinses  
Separate spin for cotton  
and linen items  
Long spin at 1000 rpm  
Spin 1000 rpm  
(*)This 60°C programme is the reference programme for the Energy label according to EEC Directive 92/75.  
67 litres  
Water  
Energy  
Time  
1.2 kWh  
110 minutes  
Water filling:  
Programmes  
Programmes  
Programmes  
30˚-40˚C  
50˚-60˚C  
90˚C  
cold water filling  
hot and cold water filling  
hot water filling  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Program m es  
Program m es fo r synt het ics, d elicat es and wo o l  
Degree of soil and type Programme dial  
Possible Max.  
Wash programme  
Description  
of laundry  
position  
options  
load  
Synthetic or mixed  
Prewash  
Wash at 50˚C  
3 rinses  
fabrics,  
underwear,  
RINSE  
HOLD  
7
2 kg  
Mixed Fabrics  
coloured garments, non-  
shrink shirts, blouses.  
Short spin at 600 rpm (*)  
Synthetic or mixed  
Wash at 40˚C  
3 rinses  
Short spin at 600 rpm (*)  
fabrics,  
underwear,  
RINSE  
HOLD  
2 kg  
Synthetics  
40  
8
coloured garments, non-  
shrink shirts, blouses.  
Wash at 30˚C  
3 rinses  
Short spin at 600 rpm (*)  
Lightly soiled synthetic  
or delicate items  
RINSE  
HOLD  
2 kg  
1 kg  
Quick & Cool  
Wool wash  
Delicates  
30  
9
Specially  
tested  
Wash at 40˚C  
3 rinses  
Short spin at 600 rpm  
programme for wool  
garments  
10  
Wash at 40˚C  
3 rinses  
Short spin at 600 rpm (*)  
Delicate fabrics, for  
example curtains.  
RINSE  
HOLD  
2 kg  
11  
12  
13  
3 rinses (with fabric  
softener if required)  
Short spin at 600 rpm (*)  
Separate rinse cycle for  
hand washed garments  
RINSE  
HOLD  
2 kg  
Delicate Rinses  
Spin 600  
Separate spin for  
synthetics and delicates  
Draining of water and  
short spin at 600 rpm.  
2 kg  
For emptying out the last  
rinse  
water  
in  
Draining of water  
Drain  
-
14  
programmes with Rinse  
Hold option  
(*) If the RINSE HOLD button  
has not been depressed.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Before any maintenance or cleaning is carried  
out you must DISCONNECT the appliance  
from the electricity supply  
Descaling  
The water we normally use contains lime. It is a good  
idea to periodically run a high temperature wash with  
detergent or use a descaler in the machine. Do this  
separately from any laundry washing, and according to  
the manufacturer's instructions. This will help to prevent  
the formation of lime deposits.  
Aft er each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Ex t er nal cleaning  
Clean the exterior cabinet of the appliance with soap  
and water only, and then dry thoroughly.  
Clean the control panel using a damp cloth only.  
Do not use abrasives  
Cleaning t he d isp enser d rawer  
From time to time the washing powder and additive  
dispenser drawer should be cleaned.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to remove  
any traces of accumulated powder.  
AL033  
AL021  
Cleaning t he d rawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme for a  
P0185  
few minutes without any clothes in the drum.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning t he filt er  
The water drain filter  
A clean filter is important for the correct functioning of  
the machine, and should therefore be cleaned after every  
washing programme.  
Open the filter door and place a container underneath to  
catch any spillage. If the filter is blocked and the  
machine is unable to drain you will need to drain the  
water manually from the machine at this stage. To do  
this, unhook the drain hose from the standpipe or sink  
and hold the end of the hose over a bowl on the floor.  
The water should drain by gravity into the bowl. When  
the bowl is full, hook the hose back up and empty the  
bowl. Repeat the procedure until water stops flowing  
out.  
AL012  
AL015  
Unscrew and remove the filter.  
Clean carefully under a fast running tap.  
Replace the filter turning now clockwise and tighten it.  
P0040  
AL017  
Warning  
When the appliance is in use and depending on the  
programme selected there can be hot water in the filter.  
Never remove the filter during a wash cycle, always  
wait until the appliance has finished the cycle, and is  
empty. When replacing the filter, ensure it is securely  
retightened so as to stop leaks and young children being  
able to remove it.  
The water inlet filters  
If your water is very hard or contains traces of lime  
deposit, the water inlet filters may become clogged.  
It is therefore a good idea to clean it from time to time.  
Turn off the water taps. Unscrew the water inlet hoses.  
Remove and clean the filters using a hard bristle brush.  
Replace the filters and tighten up the inlet hoses.  
P0090  
P0021  
The d anger s o f freezing  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Maint enance Wash  
With the use of low temperature washes it is possible to  
get a build up of residues inside the drum.  
We recommend that a maintenance wash be performed  
on a regular basis.  
Turn off the water taps.  
Unscrew the inlet hoses.  
Unhook the drain hose from the rear support and  
To run a maintenance wash:  
position the end of this hose and that of the inlet  
hose in a bowl. Run the draining programme.  
* The drum should be empty of laundry.  
* Select the hottest cotton wash program.  
* Use a normal measure of detergent, must be a powder  
(such as Ariel Futur).  
Disconnect the appliance.  
Screw the inlet hoses and reposition the drain hose.  
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Som ething Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out  
an engineer. Before contacting your Bendix Service Force Centre, please carry out the checks listed below.  
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation  
a charge will be made even if the appliance is in guarantee.  
Sym ptom  
Possible causes  
The machine does not start  
The door has not been closed.  
The plug is not properly inserted in the power socket.  
There is no current at the socket  
The main fuse has blown.  
The selector dial is not correctly positioned and pulled out  
No water is entering the machine (see: the machine does not fill)  
The machine does not fill  
Ensure the water taps are open and the water supply has not been  
disconnected  
The filter in the inlet hoses are blocked.  
The inlet hoses may be squashed or kinked.  
The water pressure is too low  
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine does not empty and/or  
does not spin  
The drain hose may be squashed or kinked  
The RINSE HOLD option has been selected.  
The drain filter may be blocked  
The drain hose extension is not correct. Follow the instructions for  
connecting to the waste.  
The drainage system pipes are blocked.  
There is water on the floor  
Too much detergent or unsuitable detergent has been used (creates too  
much foam).  
Check whether there are any leaks from one of the inlet hose fittings. It  
is not always easy to see this as the water runs down the hose; check to  
see if it is damp.  
The drain hose may be damaged or not securely positioned.  
The detergent dispenser drawer or recess is clogged.  
The drainage system pipes are blocked.  
Unsatisfactory washing results  
The machine vibrates or is noisy  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct temperature to suit the wash programme has not been  
selected.  
Too much laundry has been placed in the drum.  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not level.  
The washing load is badly distributed in the drum.  
There is very little laundry in the drum.  
The machine is overloaded  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sym ptom  
Possible causes  
The door will not open  
The programme is still running.  
The door lock has not yet released  
The water level in the drum is too high or the machine is heating.  
Spinning starts late or the machine  
does not spin  
The electronic unbalance detection device has cut in because the  
laundry is not evenly distributed in the drum. The laundry is  
redistributed by reverse rotation of the drum. This may happen several  
times before the load is evenly distributed and spinning can resume  
eventually at a lower speed, if the wash load is still not sufficiently  
balanced distributed, after 10 minutes, the machine will not spin. In this  
case, redistribute the load manually and reselect the spin programme.  
The machine makes an unusual  
noise  
The noise produced when spinning may differ from your previous  
washing machine, which is due to the modern drive system. This new  
motor ensures a softer start and more even distribution of the laundry in  
the drum when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
If after the above checks, there is still a fault , call your  
local Bendix Service Force Centre.  
Cu st o m er care  
For general enquiries concerning your Bendix appliance  
or for further information on Bendix products, please  
contact our Customer Care Department by letter or  
telephone as follows:  
Ser vice & Sp are Par t s  
If you require an engineer or wish to purchase spare  
parts contact your local Bendix Service Force Centre by  
telephoning:  
Customer Care Department  
Bendix  
08705 929929  
55-77 High Street  
Slough  
Your telephone call will be routed to the Service Centre  
covering your post code area.  
Berkshire  
SL1 1DZ  
Tel 08705 950950 *  
* Calls to this number may be recorded for training  
purposes  
When you call the Service Force centre please make  
sure you give the model and serial number of the  
appliance.  
Mod.  
..........  
Ser.  
This information can be found on the rating plate (see  
picture).  
In-guarantee customers should ensure that the above  
checks have been made as the engineer will make a  
charge if the fault is not a mechanical or electrical  
breakdown. Please note that proof of purchase is  
required for any in-guarantee service calls.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee Conditions  
Bend ix st and ard gu arant ee  
co nd it io ns  
This guarantee is in addition to your statutory and other  
legal rights.  
We, Bendix, undertake that if, within 12 months of the  
date of the purchase, this BENDIX appliance or any  
part thereof is proved to be defective by reason only of  
faulty workmanship or materials, we will, at our option,  
repair or replace the same FREE OF ANY CHARGE  
for labour, materials or carriage on condition that:  
Ex clu sio ns  
This guarantee does not cover:  
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
The appliance has been installed correctly and used  
only on the electricity supply stated on the rating  
plate.  
Products of Bendix manufacture which are NOT  
marketed by Bendix.  
The appliance has been used for normal domestic  
purposes only, and in accordance with the  
manufacturer’s operating and maintenance  
instructions.  
Eu ro p ean gu arant ee  
If you should move to another country within Europe  
then your guarantee moves with you to your new home  
subject to the following qualifications:  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
The guarantee starts from the date you first  
All service work under this guarantee must be  
undertaken by a Bendix service representative or  
authorised agent  
purchased your product  
The guarantee is for the same period and to the same  
extent for labour and parts as exists in the new  
country of use for this brand or range of products  
Any appliance or defective part replaced shall become  
our property.  
This guarantee relates to you and cannot be  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside these  
hours in which case a charge will be made.  
transferred to another user  
Your new home is within the European Community  
(EC) or European Free Trade Area  
The product is installed and used in accordance with  
our instructions and is only used domestically, i.e. a  
normal household  
Before you move please contact your nearest  
Customer Care Centre, listed below, to give them  
details of your new home. They will then ensure that  
the local Service Organisation is aware of your move  
and able to look after you and your appliances.  
France  
Senlis  
+33 (0)3 44 62 28 28  
+49 (0)911 323 2600  
+39 (0) 1678 47053  
+46 (0)20 78 77 50  
+44 (0)1753 219 898  
Germany Nurnberg  
Italy  
Pordenone  
Stockholm  
Slough  
Sweden  
UK  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BENDIX SERVICE FORCE  
To contact your local Bendix Service Centre telephone 08705 929929  
CHANNEL ISLANDS  
NORTH EAST  
ORKNEY  
(M65)  
Corsie Domestics  
7 King Street  
Kirkwall  
GUERNSEY  
JERSEY  
Guernsey Electricity  
PO Box 4  
Vale, Guernsey  
Channel Islands  
GATESHEAD  
(M39)  
Unit 356a  
Dukesway Court  
Dukesway  
Team Valley  
Gateshead NE11 0BH  
Orkney KW15  
PERTH  
Hydro Electrical  
Inveralmond House  
Ruthervenfield Road  
Perth PH1 3AQ  
Jersey Electricity Company  
PO Box 45  
Queens Road  
St Helier  
Jersey  
GRIMSBY  
(M42)  
15 Hainton Avenue  
Grimsby  
South Humberside  
PERTH  
Graham Begg  
Unit 4  
Airport Ind Estate  
Wick KW1 4QS  
DN32 9AS  
Channel Islands JE4 8NY  
(OWN SALES)  
SHETLAND  
HULL  
(M41)  
Unit 1  
Boulevard Industrial Estate  
Hull  
HU3 4AY  
SCOTLAND  
Tait Electronic Systems Ltd  
Holmsgarth Road  
Lerwick  
ABERDEEN  
(M05)  
54 Claremont Street  
Aberdeen AB10 6RA  
(OWN SALES)  
SHETLAND  
Shetland ZE1 0PW  
LEEDS  
(M37)  
64-66 Cross Gates Road  
Leeds  
LS15 7NN  
Bolts Shetland Ltd.  
26 North Road  
Lerwick  
AUCHTERMUCHY  
(M03)  
33a Burnside  
Auchtermuchy  
Fife KY14 7AJ  
NEWTON AYCLIFFE Unit 16  
(OWN SALES)  
WHALSAY  
Shetland ZE1 0PE  
(M45)  
Gurney Way  
Aycliffe Industrial Estate  
Newton Aycliffe  
DL5 6UJ  
BLANTYRE  
(M07)  
Unit 5  
Block 2  
Auchenraith Ind. Estate  
Rosendale Way  
Blantyre G72 0NJ  
Leask Electrical  
Harisdale  
Symbister, Whalsay  
Shetland ZE2 9AA  
(OWN SALES)  
SHEFFIELD  
(M38)  
Pennine House  
Roman Ridge Ind.  
Roman Ridge Road  
Sheffield S9 1GB  
DUMFRIES  
(M01)  
93 Irish Street  
Dumfries  
Scotland DG1 2 PQ  
NORTHERN IRELAND  
DUNOON  
(M67)  
Brair Hill  
7 Hill Street  
Dunoon  
NORTH WEST  
BELFAST  
(M27)  
Owenmore House  
Kilwee Business Park  
Upper Dunmury Lane  
Belfast  
BIRKENHEAD  
(M11)  
1 Kelvin Park  
Dock Road  
Birkenhead  
L41 1LT  
Argyll PA23 7AL  
BT17 0HD  
GLASGOW  
(M04)  
20 Cunningham Road  
Clyde Estate  
Rutherglen  
Glasgow G73 1PP  
WALES  
CARLISLE  
(M10)  
Unit 7  
James Street Workshops  
James Street  
Carlisle  
CARDIFF  
(M28)  
Guardian Industrial Estate  
Clydesmuir Road  
Tremorfa  
Cardiff  
CF2 2QS  
INVERNESS  
(M06)  
Unit 3B  
Smithton Ind. Estate  
Smithton  
Inverness IV1 AJ  
Cumbria  
CA2 5AH  
ISLE OF MAN  
(M64)  
South Quay Ind. Estate  
Douglas  
Isle of Man  
ISLE OF ARRAN  
Arran Domestics  
Unit 4 The Douglas Centre  
Brodick  
CLYWD  
(M14)  
Unit 6-7 Coed – Parc  
Abergele Road  
Rhuddlan  
Clwyd  
Wales  
IM1 5AT  
(OWN SALES)  
Isle of Arran KA27 8AJ  
LIVERPOOL  
(M15)  
Unit 1  
Honeys Green Precinct  
Honeys Green Lane  
Liverpool  
ISLE OF BARRA  
J Zerfah  
244 Bruernish  
Isle of Barra  
Western Islands HS9 5QY  
LL18 5UG  
DYFED  
(M77)  
Maes Y Coed  
High Mead  
L12 9JH  
(OWN SALES)  
Llanybydder  
Carmarthenshire  
SA40 9UL  
MANCHESTER  
(M09)  
Unit B  
ISLES OF BUTE  
Walker Engineering  
Glenmhor  
Upper Serpentine Road  
Rothesay  
Central Industrial Estate  
St Marks Street  
Bolton  
HAVERFORDWEST Cromlech Lodge  
BL3 6NR  
Isle of Bute PA20 9EH  
(M75)  
Ambleston  
Haverfordwest  
Pembrokeshire  
SA62 5DS  
PRESTON  
(M13)  
Unit 250  
ISLE OF LEWIS  
ND Macleod  
16 James Street  
Stornoway  
Isle of Lewis PA87 2QW  
Dawson Place  
Walton Summit  
Bamber Bridge  
Preston  
OSWESTRY  
(M17)  
Plas Ffynnon  
Warehouse  
Middleton Road  
Oswestry  
Lancashire PR5 8AL  
KELSO  
(M08)  
2-8 Wood Market  
Kelso  
Borders TD5 7AX  
STOCKPORT  
(M16)  
Unit 20 Haigh Park  
Haigh Avenue  
Stockport  
SY11 2PP  
SK4 1QR  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BENDIX SERVICE FORCE  
To contact your local Bendix Service Centre telephone 08705 929929  
MIDLANDS  
LONDON & EAST ANGLIA  
SUNBURY  
(M63)  
Unit 1a  
The Summit  
Hanworth Road  
Hanworth Ind. Estate  
Sunbury on Thames  
TW16 5D  
BIRMINGHAM  
(M18)  
66 Birch Road East  
Wyrley Road Ind. Estate  
Witton  
Birmingham  
B6 6DB  
BECKENHAM  
11a Gardener Ind. Estate  
Kent House Lane  
Beckenham  
(M79)  
Kent BR3 1QZ  
CHELMSFORD  
(M47)  
Hanbury Road  
Widford Ind. Estate  
Chelmsford  
Essex  
BOURNE  
(M44)  
Manning Road Ind. Estate  
Pinfold Road  
Bourne  
SOUTH EAST  
PE10 9HT  
CM12 3AE  
ASHFORD  
(M58)  
Unit 2  
Bridge Road Business Est.  
Bridge Road  
Ashford  
BRIDGNORTH  
(M72)  
68 St. Marys Street  
Bridgnorth  
Shropshire  
COLINDALE  
(M53)  
Unit 14  
Capitol Park  
Capitol Way  
Colindale  
Kent TN2 1BB  
WV16 4DR  
London NW9 0EQ  
FLEET  
(M59)  
Unit 1  
GLOUCESTER  
(M23)  
101 Rycroft Street  
Gloucester  
GL1 4NB  
Redsfield Ind. Estate  
Church Crookham  
Fleet  
ELTHAM  
(M78)  
194 Court Road  
Mottingham  
Eltham  
Hampshire GU13 0RD  
HEREFORD  
(M31)  
Unit 3  
London SE9 4EW  
Bank Buildings  
Cattle market  
Hareford  
HAYWARDS  
HEATH  
(M55)  
21-25 Bridge Road  
Haywards Heath  
Sussex RH16 1UA  
ENFIELD  
(M49)  
284 Alma Road  
Enfield  
HE4 9HX  
London  
EN3 7BB  
HIGHAM FERRERS 30 High Street  
SOUTH WEST  
(M51)  
Higham Ferrers  
GRAVESEND  
(M57)  
Unit B4  
Northants  
NN10 8BB  
Imperial Business Estate  
Gravesend  
Kent  
BARNSTAPLE  
(M30)  
Main Road  
Fremington  
Barnstaple  
North Devon EX31 2NT  
ILKESTON  
(M43)  
Unit 2  
Furnace Road  
Ilkeston DE7 5EP  
DA11 0DL  
HARPENDEN  
(M46)  
Unit 4  
BOURNEMOUTH 63-65 Curzon Road  
Riverside Estate  
Coldharbour Lane  
Harpenden  
AL5 4UN  
(M26)  
Bournemouth  
Dorset  
BH1 4PW  
LEICESTER  
(M22)  
Unit 7  
Oaks Ind. Estate  
Coventry Road  
Narborough  
Leicestershire  
LE0 5GF  
BRIDGEWATER  
(M35)  
6 Hamp Ind. Estate  
Bridgewater  
LETCHWORTH  
(M50)  
16-17 Woodside Ind. Estate  
Works Road  
Letchworth  
Somerset TA6 3NT  
LINCOLN  
(M40)  
Unit 8  
Herts  
SG6 1LA  
BRISTOL  
(M25)  
11 Eldon Way  
Eldonwall Trading  
Bristol  
Stonefield Park  
Clifton Street  
Lincoln  
LONDON  
(M76)  
2/4 Royal Lane  
Yiewsley  
Avon BS4 3QQ  
LN5 8AA  
West Drayton  
Middlesex  
UB7 8DL  
EMSWORTH  
(M33)  
266 Main Road  
Southbourne  
Emsworth  
NEWCASTLE  
UNDER LYME  
(M12)  
18-21 Croft Road  
Brampton Ind. Estate  
Newcastle under Lyme  
Staffordshire  
PO10 8JL  
MAIDENHEAD  
(M60)  
Reform Road  
Maidenhead  
Berkshire  
ST5 0TW  
ISLE OF WIGHT  
(M34)  
Unit 8  
Enterprise Court  
Ryde Business Park  
Ryde  
SL6 8BY  
REDDITCH  
(M20)  
13 Thornhill Road  
North Moons Moat  
Redditch  
Worcestershire  
B98 9ND  
MOLESEY  
(M61)  
10 Island Farm Avenue  
West Molesey  
Surrey  
Isle of Wight PO33 1DB  
NEWTON ABBOT Unit 2  
KT8 2UZ  
(M29)  
Zealley Ind. Estate  
Kingsteignton  
Newton Abbot  
S. Devon  
TAMWORTH  
(M19)  
Unit 3  
NEWBURY  
(M24)  
9 Pipers Court  
Berkshire Drive  
Thatcham  
Berkshire  
RG19 4ER  
Sterling Park  
Claymore  
Tamworth  
B77 5DO  
TQ12 3TD  
PLYMOUTH  
(M32)  
16 Faraday Mill  
Cattledown  
Plymouth  
WORCESTER  
(M73)  
Units 1 & 2  
IPSWICH  
(M48)  
Unit 6C  
PL4 0ST  
Northbrook Close  
Gregorys Mill Ind. Estate  
Worcester  
Elton Park Business Centre  
Hadleigh Road  
Ipswich  
REDRUTH  
(M36)  
Unit 7D  
Pool Ind. Estate  
Wilson Way  
Redruth  
WR3 8BP  
IP2 0DD  
NORWICH  
(M52)  
2b Trafalgar Street  
Norwich  
Cornwall TR15 3QW  
NR1 3HN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm (33.5”)  
60 cm (23.6”)  
55 cm (22.7”)  
POWER SUPPLY VOLTAGE  
MAX. POWER ABSORBED  
230-240 V/50 Hz  
2600 W (13A)  
WATER PRESSURE  
Minimum (cold)  
Minimum (hot)  
Maximum  
50 kPa (7 psi)  
30 kPa (4 psi)  
800 kPa (110 psi)  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
Delicate fabrics  
Wool  
4.5 kg (10 lbs)  
2 kg (4.5 lbs)  
2 kg (4.5 lbs)  
1 kg (2.2 lbs)  
SPIN SPEED  
Maximum  
1000 rpm  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unp ack ing  
All transit bolts and packing must be removed  
before using the appliance  
You are advised to keep all the packaging for re-use in  
case the appliance has to be transported again.  
Unscrew and remove the three rear transit bolts  
(using a spanner).  
P0287  
Lay the machine gently on its back, making sure  
that the hoses are not squashed.  
We suggest a polystyrene angle bracket from the  
packing is placed on the floor before tilting it back  
to avoid the hoses being squashed.  
P0018  
Carefully remove the polyethylene bags located at  
the base of the machine by pulling them toward the  
centre of the machine.  
1
2
AL009  
Place the machine in an upright position and  
remove the three plastic bolts.  
P0001  
Plug the 3 holes with the plastic plugs which you  
can find in the envelope containing the instruction  
booklet.  
P0002  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Po sit io ning  
Your new Bendix washing machine has been designed  
to be permanently plumbed in to your home’s water  
supply and drainage system. However, if this is not  
possible, it may be connected to suitable existing taps,  
with the drain hose discharging into the sink.  
The appliance has two inlet hoses, hot and cold, with  
female 3/4” BSP thread connectors. If this connection  
is not compatible with the plumbing of the existing  
installation, a variety of connectors are available from  
good hardware stores and plumbers merchants to suit  
most domestic plumbing. Any alterations to your  
existing plumbing must be carried out by a competent  
person, or qualified plumber.  
COLD WATER SUPPLY  
HOT WATER SUPPLY  
Wat er inlet  
The inlets on the back of the appliance are colour coded,  
blue for cold and red for hot.  
Before connecting the hoses, be sure to fit the black  
washers supplied as per diagram.  
If only a cold water supply is available, connect the two  
hoses to a cold water outlet by means of a ‘Y’  
connection piece.  
Installation should comply with local water authority  
and building regulation requirements.  
A
The appliance must be given a separate cold water  
supply and not be connected to a mixer tap, a single  
outlet water heater or a booster pump. A minimum  
water pressure of 7psi is required for safe operation of  
the appliance.  
AL013  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
There should be a minimum distance of 5.02m (16  
1/2ft) between the appliance’s inlet and the bottom of  
the tank.  
There will be sufficient pressure for the hot water  
supply from the hot water cylinder if the height between  
the appliance’s inlet and the bottom of the cold water  
storage cistern (not between the appliance and the hot  
water cylinder) is at least 2.74m (9ft).  
Set the hoses correctly by loosening the ring nuts. After  
positioning the inlet hoses, be sure to tighten the ring  
nuts again to prevent leaks.  
P0021  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wat er d rainage  
This appliance is designed to be permanently plumbed  
into your home's water supply and drainage system.  
3 pin  
The appliance drain hose should hook (use the plastic  
“U-piece” supplied) into a standpipe with an internal  
diameter of approximately 38mm (see diagram) thus  
ensuring there is an air break between the drain hose  
and standpipe.  
P1039  
When discharging into a standpipe ensure that the top of  
the curve in the hose end is no more than 90cm (35.4'')  
and no less than 60cm (23.6'') above floor level. The  
upright standpipe should have a minimum length of  
30cm (12'') from the bottom of the elbow to the top of  
the pipe (see diagram).  
1
38 mm.(1/2") diameter  
standpipe  
P1040  
Make sure that it is designed in such a way, that the end  
of the drain hose cannot be covered with water.  
The drain hose may be extended to a maximum of 3  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
If you intend the drain hose to empty into a sink, make  
sure that the sink is empty and the plug hose is not  
blocked. Use the plastic “U-piece” supplied.  
P0022  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Levelling  
Level the washing machine by loosening or tightening  
the feet. Once in the right position fix the feet by  
pushing the nuts against the base of the case.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation. After  
levelling the machine, secure the feet by tightening the  
ring nuts with the aid of a screwdriver.  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
P0254  
P0509  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
Sp ecial co nd it io ns  
If the floor is carpeted with a deep-pile carpet or  
covered with crumbly or soft material, insert a rigid  
support base under the feet to prevent noise, vibration or  
displacement. The base should protrude a few  
centimetres beyond the edges of the machine.  
Warning  
The machine should NOT be placed on deep pile  
carpeting.  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
In t he int erest o f t he  
enviro nm ent  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
SHOWER  
It is essential that these appliances are not connected to  
the surface water drainage system as this water is  
discharged directly into a river or stream and may cause  
pollution.  
SINK TOILET  
BATH  
BIDET  
If you require any further advice please contact your  
local authority drainage department.  
WASHING  
MACHINE  
DISHWASHER  
RAINWATER  
'RUN-OFF'  
FOUL DRAIN  
SURFACE WATER  
DRAINS & SEWERS  
FOUL SEWERS  
SEWAGE  
TREATMENT  
WORKS  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
RIVER  
RIVER  
P0987  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Elect r ical co nnect io ns  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician.or  
competent person  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
The manufacturer declines any liability should  
this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliace  
rating plate(the plate is sticked to the rear of the  
appliance).  
The appliance is supplied with a 13 amp plug fitted. In  
the event of having to change the fuse in the plug  
supplied, use a 13 Amp BS1362 fuse. Only ASTA or  
BSI approved fuses must be used.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in accordance  
with the following code:  
GREEN & YELLOW  
E
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
L
N
Brown  
Connect the green and yellow (earth) wire to the  
terminal in the plug which is marked with the letter «E»  
BROWN  
BLUE  
CORD CLAMP  
or the earth symbol  
or coloured green and yellow.  
P1041  
Connect the blue (neutral) wire to the terminal in the  
plug which is marked with the letter «N» or coloured  
black.  
Connect the brown (live) wire to the terminal in the plug  
which is marked with the letter «L» or coloured red.  
The plug must not be used if the fuse cover/carrier is  
lost. The cover/carrier is indicated by the coloured insert  
at the base of the plug.  
A replacement cover/carrier must be obtained from your  
local Bendix Service Centre, whose address are listed at  
the back of this instruction manual.  
Per m anent co nnect io n  
In the case of permanent connection it is necessary that  
you install a double pole switch between the appliance  
and the electricity supply (mains), with a minimum gap  
of 3 mm between the switch contacts and of a type  
suitable for the required load in compliance with the  
current electrical regulations.  
WARNING: a cut off plug inserted into a 13  
amp socket is a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
The switch must not break the yellow and green earth  
cable at any point.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bendix, 55-77 High Street, Slough, Berkshire SL1 1DZ  
Consumer care telephone number 08705 950 950  
Electrolux Household Appliances Limited 2000/04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taurus Group Vacuum Cleaner 2200 User Manual
TC electronic SDN BHD Guitar NDY 1 User Manual
Topfield DVR TF 600 PVRt User Manual
Toshiba Cell Phone VM4050 User Manual
Toshiba Computer Monitor LT104AC36000P SI TFT User Manual
Tripp Lite Computer Hardware SRXFANROOF User Manual
Vector Portable Generator VEC097 User Manual
ViewSonic Projector VS11334 User Manual
Viking Beverage Dispenser DDWB User Manual
Viper Automobile Alarm 791XV User Manual