OPERATING & INSTALLATION
INSTRUCTIONS
Dishwasher
DH 105
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety.You MUST read it carefully before
installing or using the appliance.
● Do not sit or stand on the open door.
Installation
● Isolate the appliance from the power supply and
● This appliance is heavy. Care should be taken when
turn off the water supply after use.
moving it.
● Care should be taken when cleaning the bottom
● It is dangerous to alter the specifications or attempt
door seal and hinge area as any exposed metal
to modify this product in any way.
edges may cut if care is not taken.
● Care must be taken to ensure that the appliance
● This product should be serviced by an
does not stand on the electrical supply cable.
authorised Service engineer, and only genuine
spare parts should be used.
● Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
● Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre. Always insist on genuine
spare parts.
● Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Child Safety
Conservation
● This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
In the interest of the environment:
● Materials marked with the symbol
are
● Keep all packaging well away from children.
recyclable.
● Keep all detergents in a safe place out of children's
● Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
reach.
● When the appliance is to be scrapped, cut off
the power supply cable and make the door
closing device unusable to prevent young
children from being trapped inside.
During Use
● Items that are contaminated by petrol, paint, steel
or iron debris, corrosive, acidic or alkaline
● Help to keep your country tidy - use authorised
chemicals must not be washed in this dishwasher.
disposal sites for your old appliance.
● Under no circumstances should you open the door
whilst the appliance is in operation. Always turn off
the appliance before opening the door.
● Only use detergent specifically designed for use in
dishwashers.
● Long bladed knives stored in an upright position are
a potential hazard.
● Long and/or sharp items of cutlery such as carving
knives must be positioned horizontally in the upper
basket.
● When finishing loading or unloading close the
door, as an open door can be a hazard.
AVV01en
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1. Water hardness adjustment
2. Levelling spacers
14
3. Upper basket stop
1
4. Salt container
2
5. Large filter
3
13
12
6. Detergent dispenser
7. Control panel
8. Rating plate
11
10
4
5
9. Rinse aid dispenser
10. Central filter
11. Lower spray arm
12. Upper spray arm
13. Upper basket
14. Worktop
6
9
8
7
IN68
The control panel
1 2
3
4
5
6
7
1. Mains On indicator light
2. On/Off pushbutton
3. Programme guide
4. Door handle
7. Programme sequence indicator
As the programme progresses, the programme
selector dial turns, to show the phase in the
wash programme the appliance has reached.
Prewash /Rinse and hold
Wash
5. Programme marker
6. Programme selector dial
Cold rinse
Hot rinse
Drying
APP35en
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections
comply with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and
then fill with salt
5. Fill the rinse aid dispenser.
Water hardness
French
Setting the water softener
Clarke
PPM
Use of
salt
Level
degrees
(Parts per
Million)
degrees
(°TH)
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the water
supply, which would have a detrimental or adverse
effect on the operation of the appliance.
0
1
2
3
4
5
0 - 80
0 - 6
NO
0 - 8
9 - 20
81 - 200
7 - 17
YES
YES
YES
YES
YES
201 - 400
401 - 600
601 - 900
901 - 1200
18 - 28
29 - 42
43 - 63
64 - 84
21 - 40
41 - 60
61 - 90
91 - 120
The higher the content of these salts, the harder your
water is.
Water hardness is measured in equivalent scales,
Clarke, French degrees and PPM (parts per Million).
The softener should be adjusted according to the
hardness of the water in your area.Your local Water
Authority can advise you on the hardness of the water
in your area.
If your water is level 0 it is already soft
and therefore there is no need to use salt.
In this case adjust the water softener to
level 1 without using salt.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener
should be adjusted.
To adjust the water softener
With a screwdriver turn the selector on the upper front
corner of the machine until the level required
corresponds with the marker.
5
AA05
PDU06UKen
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with salt
Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher, especially
table salt, will damage the water softener.
Only fill with salt just before starting one of
the complete washing programmes (not the
Rinse and Hold programme).This will
prevent any grains of salt or salty water,
which may have been spilled, remaining on
the bottom of the machine for any period of
time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour 1 litre of water inside the container (this is
necessary only before filling with salt for the
first time).
SALET
SAL
SALZ
SEL
3. Using the funnel provided, pour in the salt until the
container is full.
Do not worry if water over flows from the unit when
filling with salt, this is quite normal.
4. Replace the cap making sure that there is no trace
SR06
of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
The salt cap has a refill indicator window in the centre.
A green float is clearly visible when there is salt
inside the container, and almost disappears when the
salt has finished reminding you to add salt.
SR11
SAL02en
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, and spot and streak free
drying. The dispenser, which is positioned inside the
door, holds about 110 ml of rinse aid, which is
sufficient for 16 - 40 dishwashing programmes,
depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is completely
full. The indicator (B) will be completely dark.
A
3. Top up the rinse aid when the indicator (B)
BR01
becomes clear.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess foaming
during the next wash.
B
5
4
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage).
BR03
Start from position 3.
C
Gradually increase the dose if there are drops of water
or lime spots on the dishes after washing. Reduce it if
there are sticky whitish streaks on the dishes.
5
BR02
BRI01en
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.
Do not load very small items which can fall
through the baskets.
The lower basket
UI05
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the upper
spray arm can turn freely.
The cutlery basket
UI19
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
UI04
CES08en
8
Download from Www.Somanuals.com. All Manuals Search And Download.
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses.
Arrange items on and underneath the fold-down cup
racks so that water can reach all surfaces.
Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.
Before closing the door, ensure that the
spray arms can rotate freely.
US64
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to 31
cm in diameter) you can load them in the lower basket
after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
A
1. Move the front runner stops (A) of the upper basket
outward and slide the basket out.
2. Refit the basket in the higher position and replace
the stops (A) in their original position.
When the top basket is in the higher
position it will only take plates up to 20 cm
in diameter and you will not be able to use
the raised cup racks.
RC01
After loading your machine always close
the door, as an open door can be a hazard.
CES11en
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
Only use detergents specifically designed
for use in dishwashers.
We recommend the use of Finish detergents which
are available in the following options:
Finish Double Action Tablets. Each tablet has the
exact amount of detergent required, simply place in
the dispenser.
Finish Powder recommended for every day use.
Min = 15 g
Max = 30 g
D
Finish Liquid Gel ideal for more delicate items such
as fine bone china.
If using powder detergents proceed as follows:
M A X
M I N
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the instructions
given on the packet.
DE17
3. Always close the lid.
4. If the programme has a prewash add the required
detergent over the lid of the dispenser.
If using detergent in tablets proceed as follows:
1. For all programmes; place 1 tablet inside the
detergent dispenser.
DE02
2. Always close the lid.
3. For all programmes with prewash; place a portion
of a further tablet on the lid of the detergent
dispenser.
Insufficient quantities of detergent will
produce poor washing results, whereas an
excessive amount of detergent will not
improve washing results and is also
wasteful.
Using no more than the correct amount also
contributes to reducing pollution.
DET06en
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
To save energy
Items not suitable for
dishwashers
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
The following items should not be washed in
the dishwasher (unless they are sold as
dishwasher proof):
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart) so that any food scraps
do not become caked on the dishes while you are
waiting to run the complete wash programme.
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
Do not prewash dishes under running water.
- saucepans with wooden handles
- aluminium ware
- crystal ware
For best washing and drying results
- leaded glass
- plastic items
Before loading, remove all scraps of food and soak
very heavily soiled pots and pans.
- antique or fine decorated china
Arrange saucepans, cups and glasses etc. upside-
down.
Certain types of decoration can discolour when
washed in a dishwasher.
Tilt items with convex or concave surfaces so that the
water drains off easily.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Avoid contact between the dishes as far as possible.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
Wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be
improved.
A chemical reaction can occur between silver
cutlery and stainless steel cutlery. As a precaution,
do not wash together.
Empty the lower basket first and then the upper one;
this will avoid water dripping from the upper basket
onto the dishes in the lower one.
Iron and cast iron objects can rust and stain other
items.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes as
soon as the programme finishes.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of
the item.
When buying new dishes, ensure that
they are dishwasher proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
POURING
PACK
W
NE
N
O
TI
E
C
BL
A
U
DO
L I Q U I D G E L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
CON06en
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Programme
Degree of soil
Starting position
of the
Cycle
description
Required
push buttons
programmer
Any.
1 cold rinse, (to avoid food
scraps from sticking
together).
RINSE AND
HOLD
Partial load (to be
completed later in the
day).
On/Off
On/Off
1
2
Cold prewash
Main wash up to 65°C
2 cold rinses
1 hot rinse
Heavy soil.
Crockery, cutlery, pots
and pans
POWER WASH
65°C
Drying
Main wash up to 65°C
2 cold rinses
1 hot rinse
Normal soil.
Crockery and cutlery
NORMAL WASH
65°C
On/Off
On/Off
3
4
Drying
Main wash up to 65°C
1 cold rinse
1 hot rinse
Light soil.
Crockery and cutlery
ECO WASH
*
65°C
This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery
(except pots) so that you may re-use them promptly.
*
PRO25en
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
1. Check the filters
9. At the end of the washing
programme
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
At the end of the programme the
dishwasher will automatically stop.
The "Mains On" indicator light remains on
until the On/Off push button is depressed.
2. Check that there is rinse aid
and salt
10. Switch off the dishwasher
Switch off the dishwasher by pressing the
On/Off push button and open the door.
3. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the
plates, saucers, glasses and cups etc. in it.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
Slide the baskets back into the machine.
4. Ensure that the spray arms can
rotate freely.
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
5. Measure out detergent
Add the detergent into the dispenser. Consult
the instructions on the packet.
Important!
Close the detergent dispenser lid.
Care must be taken if the door is opened
during the hot phase or immediately
after a programme has finished, as
steam may escape.
6. Close the dishwasher door
7. Set the programme
Turn the programme selector dial clockwise until
the number of the programme you wish to select
corresponds with the programme marker on the
control panel.
8. Start the programme
Depress the On/Off push button.
The "Mains On" indicator light will come on
and the machine will start.
If you wish to interrupt the washing
programme at any time press this button
again.
SEQ17en
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with a
damp cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes
using detergent. Regular use of Finish Dishwasher
Cleaner cleans inaccessible parts, eliminates
unpleasant food odours and helps prevent the build-up
of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To remove the drain filter
A
- simply pull it out by the handle.
Once cleaned, refit the filter by pushing it back to its
MA04
MA19
original position until it engages.
Cleaning the large filter
(Every month)
If necessary clean the large filter (B) on both sides
under running water, using a brush.
To remove the large filter
90°
1. Remove the spray arm by pulling it upwards on one
B
side.
C
2. Turn the column (C) anticlockwise by 90° and then
slide out the filter.
MA20
MA05
3. Once cleaned refit it following the above instructions
in reverse order.
4. Ensure the filter is in its original position, the handle
of the drain filter should be pointing towards the
front of the appliance.
MA21
MA18
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.
MAN04en
14
Download from Www.Somanuals.com. All Manuals Search And Download.
External cleaning
Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary use
only neutral detergents. Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).
Prolonged periods of non-operation
If you are not using the machine for any period of
time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
MAN03en
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer.
Before contacting your local Service Force Centre, please carry out the checks listed below.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or
installation a charge will be made even if the appliance is in guarantee.
Symptom
Solution
The machine will not start
● The door has not been properly closed.
● The plug is not properly inserted in the power socket.
● There is a power failure.
The machine does not fill
with water
● Ensure the water tap is open.
● Ensure the mains water supply has not been cut off.
● The inlet hose may be squashed or bent. Reposition the hose.
● The inlet hose may be blocked. Switch off the water supply
and clean the filter.
The filters are blocked
● Clean the filters (refer to "Maintenance and cleaning").
The spray arms are not rotating
The dishwasher will not drain
● Ensure the crockery is loaded correctly.
● The drain hose may be squashed or bent.
Reposition the hose.
● The sink may be blocked. Clear any blockages.
● The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
● There is no vent in the end of the drain hose.
The machine is noisy
● Dishes are rattling against each other, refer to “Loading
your machine”.
● The spray arms are knocking against the dishes. Refer to
"Loading your machine".
The door is difficult to close
● The dishwasher is not level, or not properly built-in.
Visible lime deposits or white
film on the dishes
● Check that there is salt and that the salt cap is tight.
● Check that the right level of the water softener is set.
The dishes are not quite dry
● The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
● The baskets are too full.
● The dishes have not been arranged properly.
● The spray arms do not rotate
● The spray arms are clogged.
● The filters are clogged.
● The filters are not in the correct position.
● Not enough detergent has been used or it is unsuitable.
● The detergent is old or has gone hard.
● The salt container cap is not properly closed.
● The washing programme selected is too gentle.
RIM05UKen
16
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model
and serial number. This information can be found on
the rating plate located on the right hand side of the
dishwasher door (see picture).
Service and spare parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact your
local Tricity Bendix Service Centre by telephoning:
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
08705 929 929
The addresses of Tricity Bendix Service Force Centres
can be found at the back of this instruction book.
Before calling out an engineer, please ensure you
have read the details under the heading "Something
Not Working" and have the model number and
purchase date to hand.
In-guarantee customers should ensure
that the checks under the heading
"Something Not Working" have been
made as the engineer will make a charge
if the fault is not a mechanical or
electrical breakdown.
Please note that it will be necessary to
provide proof of purchase for any
in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Tricity Bendix
appliance or for further information on Tricity Bendix
products please contact our Customer Care
Department by letter or telephone as follows:
Customer Care Department
Tricity Bendix
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 950 950
GAR06en
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee conditions
Standard guarantee conditions
We, Tricity Bendix Limited, undertake that if within 12 months of the date of purchase this Tricity Bendix
appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition
that:
● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
● The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
instructions.
● The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not
authorised by us.
● All service work under this guarantee must be undertaken by a Tricity Bendix Service Force Centre.
● Any appliance or defective part replaced shall become the Company’s property.
● This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
● Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
● Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside
the United Kingdom.
● Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
● Products of Tricity Bendix manufacture which are not marketed by Tricity Bendix Limited.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
● The guarantee starts from the date you first purchased your product.
● The guarantee is for the same period and to the same extent for labour and parts as exists in the new
country of use for this brand or range of products.
● This guarantee relates to you and cannot be transferred to another user.
● Your new home is within the European Community (EC) or European free Trade Area.
● The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
● The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your
new home. They will then ensure that the local service Organisation is aware of your move and able to look
after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)3 44 62 28 28
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)20 78 77 50
+44 (0)1753 219898
Nurnberg
Pordenone
Stockholm
Slough
Sweden
UK
GAR09en
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse
aid dispenser.
Test standard
EN 50242
Reference programme:
Load:
Power wash 65°C
12 standard place settings
position 5
Rinse aid selector:
Detergent dosage :
25 g in the dispenser
5 g on the dispenser lid
US57
UI49
Arrangement
lower basket
Arrangement
upper basket
Technical specifications
DIMENSIONS
Width
60 cm
85 cm
82 cm
Height with worktop
Height without worktop
Max depth
60 cm
Max depth with open door
115.2 cm
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
220/240 V - 50 Hz
200 W
2100 W
2300 W
WATER SUPPLY PRESSURE
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
CAPACITY
12 place settings
IST30en
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Remove all packaging before positioning the
machine.
If possible, position the machine next to a water tap
and a drain.
Water supply connections
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in
the technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.
The locknut must be correctly fitted to avoid water
leaks.
Avoid bends or kinks in the hose which could prevent
or slow down the water supply.
If the machine is connected to new pipes or pipes
which have not been used for a long time, you should
run the water for a few minutes before connecting the
inlet hose. This will prevent deposits of sand or rust
clogging the inlet hose filter.
COL08en
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Water outlet hose connection
The end of the drain hose can be connected in the
following ways:
2
1
3
1. To the sink outlet siphon, securing it if necessary
with a clip.
2. Hooked over the edge of the sink using the special
curved plastic guide provided.
3. To a stand pipe provided with vent-hole, minimum
internal diameter 4 cm.
CS09
The waste connection must be at a height of between
30 cm (minimum) and 100 cm (maximum) from the
bottom of the dishwasher.
The drain hose can face either to the right or left of the
dishwasher
Ensure the hose is not bent or squashed as this could
prevent or slow down the discharge of water.
If you use a drain hose extension it must be no longer
than 2 metres and its internal diameter must be no
smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used
for connections to the waste outlet must be no smaller
than the diameter of the hose provided.
+ 2 m max
The sink plug must not be in place when the
machine is draining as this could cause the water
to siphon back into the machine.
CS10
COL09en
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
This appliance must be earthed.
The manufacturer declines any
responsibility should this safety measure
not be observed.
If the plug that is fitted to your appliance is not suitable
for the socket, it must be cut off and the appropriate
plug fitted.
Important
The wires on the mains lead are coloured in
accordance with the following code:
Green andYellow -Earth
Blue
Brown
-Neutral
-Live
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug.
CE03
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
"E" or the earth symbol
yellow.
or coloured green and
2. Connect the Blue (neutral) wire to the terminal in
the plug which is marked with the letter "N" or
coloured black.
3. Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter "L" or coloured
red.
The plug moulded onto the lead incorporates a 13amp
BSI362 fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the product.
A replacement cover/carrier must be obtained from
your local Service Force Centre.
This appliance complies with the following E.E.C.
Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility
Directive) and subsequent modifications.
COLUKen
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the worktop
You can move the worktop forward or backward by 25
mm in order to align the machine with other kitchen
units.
Simply unscrew the two rear retaining screws, move
the top to the required position and then retighten the
screws.
IN26
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it
under a close fitting sink unit or a pre-existing top,
providing the dimensions of the recess correspond to
those shown in the picture.
Proceed as follows:
-
Remove the machine’s worktop by unscrewing the
two rear retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.
IN05
Insert the machine after adjusting height and levelling
with the adjustable feet. When inserting the machine,
ensure that the water inlet and drain hoses are not
kinked or squashed.
Levelling
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door will
not catch on the levelling spacers on either side of the
cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly level.
INS18en
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Tricity Bendix Service Force
To contact your local Tricity Bendix Service Centre telephone 08705 929 929
ORKNEY
(M65)
Corsie Domestics
7 King Street
Kirkwall
CHANNEL ISLANDS
NORTH EAST
GUERNSEY
Guernsey Electricity
PO Box 4
GATESHEAD
(M39)
Unit 356a
Dukesway Court
Orkney KW15
PERTH
PERTH
Hydro Electrical
Vale, Guernsey
Channel Islands
Dukesway
Team Valley
Gateshead
NE11 0BH
Inveralmond House
Ruthervenfield Road
Perth PH1 3AQ
JERSEY
Jersey Electricity Company
PO Box 45
Queens Road
St Helier
Graham Begg
Unit 4
GRIMSBY
(M42)
15 Hainton Avenue
Grimsby
Airport Industrial Estate
Wlck KW1 4QS
Jersey
Channel Islands
JE4 8NY
South Humberside
DN32 9AS
(OWN SALES)
SHETLAND
Tait Electronic Systems Ltd.
Holmsgarth Road
Lerwick
HULL
(M41)
Unit 1
Boulevard Industrial Estate
Hull
HU3 4AY
SCOTLAND
(OWN SALES)
SHETLAND
Shetland ZE1 0PW
ABERDEEN
(M05)
54 Claremont Street
Aberdeen
AB10 6RA
Bolts Shetland Ltd.
26 North Road
Lerwick
LEEDS
(M37)
64-66 Cross Gates Road
Leeds
LS15 7NN
(OWN SALES)
WHALSAY
Shetland ZE1 0PE
AUCHTERMUCHY
(M03)
33A Burnside
Auchtermuchy
Fife
NEWTON AYCLIFFE
(M45)
Unit 16
Leask Electrical
Harlsdale
Symbister, Whalsay
Shetland ZE2 9AA
Gurney Way
Aycliffe Ind Estate
Newton Aycliffe
DL5 6UJ
KY14 7AJ
(OWN SALES)
BLANTYRE
(M07)
Unit 5
Block 2
Auchenraith Ind Estate
Rosendale Way
Blantyre
SHEFFIELD
(M38)
Pennine House
Roman Ridge Ind.
Roman Ridge Road
Sheffield
NORTHERN IRELAND
BELFAST
(M27)
Owenmore House
Kilwee Buisness Park
Upper Dunmury Lane
Belfast
G72 0NJ
S9 1GB
DUMFRIES
(M01)
93 Irish Street
Dumfries
Scotland
NORTH WEST
BT17 0HD
DG1 2PQ
BIRKENHEAD
(M11)
1 Kelvin Park
Dock Road
Birkenhead
L41 1LT
DUNOON
(M67)
Brair Hill
7 Hill Street,
Dunoon
Argyll
PA23 7AL
WALES
CARDIFF
(M28)
Guardian Industrial Estate
Clydesmuir Road
Tremorfa, Cardiff
CF2 2QS
CARLISLE
(M10)
Unit 7
James Street Workshops
James Street
Carlisle
Cumbria
CA2 5AH
GLASGOW
(M04)
20 Cunningham Road
Clyde Estate
Rutherglen,
Glasgow
CLYWD
(M14)
Unit 6-7 Coed - Parc
Abergele Road
Rhuddlan
Clwyd
Wales
G73 1PP
ISLE OF MAN
(M64)
South Quay Ind Estate
Douglas
Isle of Man
INVERNESS
(M06)
Unit 3B
Smithton Indust. Est.
Smithton
Inverness
IV1 AJ
LL18 5UG
DYFED
(M77)
MaesY Coen
High Mead
Llanybydder
Dyfed
LIVERPOOL
(M15)
Unit 1
Honeys Green Precinct
Honeys Green Lane
Liverpool
ISLE OF ARRAN
Arran Domestics
Unit 4 The Douglas Centre
Brodick
Isle of Arran
KA27 8AJ
SA40 9UL
L12 9JH
HAVERFORDWEST
(M75)
Cromlech Lodge
Amerlston
Haverfordwest
SA62 5DS
MANCHESTER
(M09)
Unit B
(OWN SALES)
Central Industrial Estate
St Marks Street
Bolton
ISLE OF BARRA
J Zerfah
244 Bruernish
Isle of Barra
Western Islands
HS9 5QY
BL3 6NR
OSWESTRY
(M17)
Plas Ffynnon
Warehouse
Middleton Road
Oswestry
PRESTON
(M13)
Unit 250
(OWN SALES)
ISLE OF BUTE
Dawson Place
Walton Summit
Bamber Bridge
Preston
SY11 2PP
Walker Engineering
Glenmhor
Upper Serpentine Road
Rothesay
Lancashire
PR5 8AL
Isle of Bute
PA 20 9EH
STOCKPORT
(M16)
Unit 20 Haigh Park
Haigh Avenue
Stockport
ISLE OF LEWIS
(M69)
ND Macleod
16 James Street
Stornoway
SK4 1QR
Isle of Lewis
PA87 2QW
KELSO
(M08)
2-8 Wood Market
Kelso
Borders TD5 7AX
GAR07en
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Tricity Bendix Service Force
To contact your local Tricity Bendix Service Centre telephone 08705 929 929
MIDLANDS
LONDON & EAST ANGLIA
SOUTH EAST
BIRMINGHAM
(M18)
66 Birch Road East,
BECKENHAM
(M79)
11 a Gardener Indust Estate ASHFORD
Unit 2
Bridge Road Buisness
Estate
Bridge Road
Ashford
Kent
Wyrley Road
Industrial Estate
Witton
Birmingham
B6 7DB
Kent House Lane
Beckenham
(M58)
Kent BR3 1QZ
CHELMSFORD
(M47)
Hanbury Road
Widford Ind Estate
Chelmsford
Essex
TN2 1BB
BOURNE
(M44)
Manning Road Ind Estate
Pinfold Road
Bourne
FLEET
(M59)
Unit 1
CM12 3AE
Redsfield Industrial Estate
Church Crookham
Fleet
Hampshire
GU13 0RD
PE10 9HT
COLINDALE
(M53)
Unit 14
BRIDGNORTH
(M72)
1 Underhill Street
Bridgnorth
Salop
Capitol Park
Capitol Way
Colindale
WV16 4BB
London NW9 0EQ
HAYWARDS HEATH
(M55)
21-25 Bridge Road
Haywards Heath
Sussex
GLOUCESTER
(M23)
101 Rycroft Street
Gloucester
GL1 4NB
ELTHAM
(M78)
194 Court Road
Mottingham
Eltham
RH16 1UA
London SE9 4EW
HEREFORD
(M31)
Unit 3
SOUTH WEST
Bank Buildings
Cattle market
Hareford
ENFIELD
(M49)
284 Alma Road
Enfield
London
BARNSTAPLE
(M30)
P.O. Box 12
Barnstaple
North Devon
EX31 2YB
HE4 9HX
EN3 7BB
HIGHAM FERRERS
(M51)
30 High Street
Higham Ferrers
Northants
GRAVESEND
(M57)
Unit B4,
Imperial Buisness Estate
Gravesend
Kent
BOURNEMOUTH
(M26)
63-65 Curzon Road
Bournemouth
Dorset
NN10 8BB
DA11 0DL
BH1 4PW
ILKESTON
(M43)
Unit 2
Furnace Road
Ilkeston
DE7 5EP
HARPENDEN
(M46)
Unit 4
BRIDGEWATER
(M35)
6 Hamp Industrial Estate
Bridgewater
Somerset
Riverside Estate
Coldharbour Lane
Harpenden
AL5 4UN
TA6 3NT
LEICESTER
(M22)
Unit 7
Oaks Industrial Estate
Coventry Road
Narborough
Leicestershire
LEO 5GF
BRISTOL
(M25)
11 Eldon Way
Eldonwall Trading
Bristol
Avon
BS4 3QQ
LETCHWORTH
(M50)
16-17 Woodside Ind Est.
Works Road
Letchworth
Herts
SG6 1LA
LINCOLN
(M40)
Unit 8 Stonefield Park
Clifton Street
Lincoln
EMSWORTH
(M33)
266 Main Road
Southbourne
Emsworth
LONDON
(M76)
2/4 Royal Lane
Yiewsley
West Drayton
Middlesex
LN5 8AA
PO10 8JL
NEWCASTLE
UNDER LYME
(M12)
18-21 Croft Road
Brampton Industrial Estate
Newcastle under Lyme
Staffordshire
UB7 8DL
ISLE OF WIGHT
(M34)
Unit 8
Enterprise Court
Ryde Buisness Park
Ryde
Isle of Wight
PO33 1DB
MAIDENHEAD
(M60)
Reform Road
Maidenhead
Berkshire
ST5 0TW
SL6 8BY
NUNEATON
(M21)
19 Ptarmigan Place
Townsend Drive
Nuneaton
MOLESEY
(M61)
10 Island Farm Avenue
West Molesey
Surrey
NEWTON ABBOT
(M29)
Unit 2 Zealley Industrial
Estate
Kingsteignton
Newton Abbot
S. Devon
CV11 6RX
KT8 2UZ
REDDITCH
(M20)
13 Thornhill Road
North Moons Moat
Redditch
NEWBURY
(M24)
PO Box 5627
Newbury
TQ12 3TD
Worcestershire
B98 9ND
Berkshire
RG14 5GF
PLYMOUTH
(M32)
16 Faraday Mill
Cattledown
Plymouth
TAMWORTH
(M19)
Unit 3
IPSWICH
(M48)
Unit 2B
PL4 0ST
Sterling Park
Claymore
Tamworth
B77 5DO
Elton Park Buisness Centre
Hadleigh Road
Ipswich
REDRUTH
(M36)
Unit 7D
Pool Industrial Estate
Wilson Way,
Redruth,
Cornwall
TR15 3QW
IP2 0DD
WORCESTER
(M73)
Unit 1
NORWICH
(M52)
2b Trafalgar Street
Norwich
NR1 3HN
Northbrook Close
Gregorys Mill Ind Estate
Worcester
SUNBURY
(M63)
Unit 1 a
The Summit
WR3 8BP
Hanworth Road
Hanworth Ind Estate
Sunbury on Thames
TW16 5D
GAR08en
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ
Customer care telephone number...
08705 950 950
152985 53/1
Download from Www.Somanuals.com. All Manuals Search And Download.
|