Project
Quantity
Item #
Model Specified:
CSI Section 11400
Compact Prep Table Refrigerators/
48" Wide Models
Self-Contained
48" Wide 8 Pan Model Hinged Left/Right
48" Wide 12 Pan Model Hinged Left/Right
48" Wide 18 Pan Model Hinged Left/Right
UPT488-LR
UPT4812-LR
UPT4818-LR
UPT
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
Finally there is a compact prep table product worthy of the Traulsen name.
Their rugged construction and high quality components make these units
capable of standing up to the demanding environment of any foodservice
kitchen. Each unit is built with a high quality stainless steel exterior and
durable anodized aluminum interior.
They are also designed for high performance, providing accurate
temperature maintenance within NSF Standard 7 guidelines. Fresh, safe
food is assured, even under the most demanding conditions.
Their front breathing design allows for "zero-clearance" installation. As a
result they can be placed right up against the backwall and alongside other
kitchen equipment, saving valuable floor space. Additionally, they are
supplied with top cut-outs in order to accommodate sixth size food pans. A
full compliment of 4" deep 1/6 size plastic pans is provided.
Model UPT4812-LR
(shown with optional casters)
Standard Product Features
Options & Accessories
•
•
•
•
•
•
•
Stainless Steel Exterior Top, Sides & Doors
Anodized Aluminum Interior
•
•
•
•
•
•
Stainless Steel Finished Back
Additional Powder Coated Shelves
Front Breathing Self-Contained Refrigeration System
Environmentally Friendly R-134a Refrigerant
Top Cut-Outs To Accommodate 1/6 Size Pans
Full Compliment Of Plastic 1/6 Size Pans Provided
Removable Stainless Steel Insulated Pan Cover & Pivoting
Front Lid
6" Overall Height Casters (for use in lieu of legs)
4" Overall Height Casters (for use in lieu of legs)
3-1/2" Overall Height Casters (for use in lieu of legs)s)
Two Year Service/Labor Warranty Available
•
•
Reversible Full Length Nylon Cutting Board
Self-Closing Stainless Steel Doors With Stay Open Feature
At 105 Degrees
•
•
•
•
Horizontal Work Flow Door Handles
Anodized Aluminum Interior Door Liners
Interior Mounted Thermometer
Two (2) Powder Coated Shelves Per Door, Mounted On
Pilasters
•
•
•
•
•
•
Automatic Non-Electric Condensate Evaporator
Magnetic Snap-In Door Gaskets
8' Cord & Plug Attached
Set of Four (4) 6" High Adjustable Legs
One Year Parts And Labor Warranty
Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to U.S.
and Canadian safety standards and and NSF
International in accordance with ANSI/NSF7.
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Model UPT4818
Eighteen (18) Sixth Size Pan Capacity
Compact Undercounter
Refrigerator Model
(eighteen 4" deep sixth size plastic pans provided)
Elevation - UPT4818
Plan - UPT4818
Section - UPT4818
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, and doors are constructed of 22 gauge
stainless steel. Cabinet interior and door liners are constructed of anodized
aluminum. The exterior cabinet back and bottom are constructed of galvanized steel.
A stainless steel door with a recessed work-flow handle and anodized aluminum liner
is provided. The door self closes at less than 90 degrees and also includes a stay
open feature at 105 degrees. Easily removable for cleaning, vinyl magnetic door
gasket assures tight door seal.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
A full length reversible nylon cutting board, 12" wide (for models UPT488 and
UPT4812) or 8" wide (for model UPT4818) is supplied standard.
Pans & Cover
Each model is supplied standard with its full compliment of 4" deep plastic 1/6 size
pans and stainless steel pan dividers. The insulated pivoting pan cover is constructed
of stainless steel, and is removable for cleaning.
Refrigeration System
A balanced, rear mounted, front breathing, self-contained refrigeration system using
R-134a refrigerant is provided. It features a capillary tube metering device, air-cooled
hermetic compressor, a forced air evaporator coil and a non-electric condensate
evaporator. An 8' cord and plug is provided. Standard operating temperature is 34 to
38°F.
Interior
Standard interior arrangements include two (2) powder coated wire shelves per door,
mounted on pilasters. These are adjustable in 1/2" increments, allowing for a mini-
mum of 1-1/2" spacing between shelves.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.1
Depth - with door open 90°
Clear door height in.
Clear door width in.
Height - overall on 6" legs in.
Number of shelves - total
Shelf area sq. ft.
UPT488
13.1
48
333⁄8
50
241⁄8
181⁄4
443⁄4
4
UPT4812
13.1
48
333⁄8
50
241⁄8
181⁄4
443⁄4
4
UPT4818
13.1
48
333⁄8
50
241⁄8
181⁄4
46
4
10.3
8
10.3
12
10.3
18
Pan Capacity - 1/6 Size
ELECTRICAL DATA
Voltage
115/60/1
6.3
115/60/1
6.3
115/60/1
6.3
Full Load Amperes
Wattage
520
520
520
REFRIGERATION DATA
Refrigerant
R-134a
R-134a
R-134a
BTU/HR - H.P.2
1600 (1⁄4 HP) 1600 (1⁄4 HP) 1600 (1⁄4 HP)
SHIPPING DATA
Length - Crated in.
Depth - Crated in.
Height - Crated in.
Volume - Crated cu. ft.
Net Wt. lbs.
631⁄2
441⁄4
463⁄4
76
631⁄2
441⁄4
463⁄4
76
631⁄2
441⁄4
463⁄4
76
NOTES
1= Overall depth figure includes standard cutting board.
2= Based on a 90 degree F ambient and 20 degree F evaporator.
285
300
285
300
285
300
Equipped With One NEMA 5-15 P Plug
Gross Wt. lbs.
NOTE: When ordering please specify: Voltage, Hinging, Optional Accessories and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35822 (revised 1/07)
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
|