User’s Manual
A30
Satellite
ATELLITE A30 SATELLITE A30 SATELLITE A30
freedom.
computers.toshiba-europe.com
Download from Www.Somanuals.com. All Manuals Search And Download.
User's Manual
Macrovision License of Notice
This product incorporates copyright protection technology that is
protected by methods and claims of certain U.S. patents and other
intellectual rights owned by Macrovision Corporation, and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation and is intended for home and other limited
viewing uses only unless authorized by Macrovision Corporation. Reverse
engineering of disassembly is prohibited.
Safety Instructions
Use the following safety guidelines to help protect yourself and your
computer.
When Using Your Computer
Do not operate your portable computer for an extended period of time
with the base resting directly on your body. With extended operation, heat
can potentially build up in the base. Allowing sustained contact with the
skin could cause discomfort or, eventually, a burn.
■ Do not attempt to service the computer yourself. Always flow
installation instructions closely.
■ Do not carry a battery in your pocket, purse, or other container where
metal objects (such as car keys) could short-circuit the battery
terminals. The resulting excessive current follow can cause extremely
high temperatures and may result in damage from burns.
■ Be sure that noting rests on your AC adapter’s power cable and that
the cable is not located where it can be tripped over or stepped on.
■ Place the AC adapter in a ventilated area, such as a desk top or on
the floor, when you use it to run the computer or to charge the battery.
Do not cover the AC adapter with papers or other items that will
reduce cooling; also, do not use the AC adapter while it is inside a
carrying case.
■ Use only the AC adapter and batteries that are approved for use with
this computer. Use of another type of battery or AC adapter may risk
fire or explosion.
■ Before you connect the computer to a power source, ensure that the
voltage rating of the AC adapter matches that of the available power
source.
903 115 V/60Hz in most of North and south America and some Far
Eastern countries such as Taiwan.
904 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
905 230 V/50 Hz in most of Europe, the Middle East, and the Far East.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
User's Manual
■ If you use an extension cable with your AC adapter, ensure that the
total ampere rating of the products plugged in to the extension cable
does not exceed the ampere rating of the extension cable.
■ To remove power from the computer, turn it off, remove the battery,
and disconnect the AC adapter from the electrical out let.
■ To help avoid the potential hazard of electric shock, do not connect or
disconnect any cables or perform maintenance or reconfiguration of
this product during an electrical storm.
■ When setting up the computer for work, place it on a level surface.
■ Do not dispose of batteries in a fire. They may explode. Check with
local authorities for disposal instructions.
■ When travelling, do not check the computer as baggage. You can put
your computer through an X-ray security machine, but never put your
computer through a metal detector. If you have the computer checked
by hand, be sure to have a charged battery available in case you are
asked to turn on the computer.
■ When travelling with the hard drive removed from the computer, wrap
the drive in a non-conducting material, such as cloth or paper. If you
have the drive checked by hand, be ready to install the drive in the
computer. Your can put the hard drive through an X-ray security
machine, but never, but the drive through a metal detector.
■ When travelling, do not place the computer in overhead storage
compartments where it could slide around. Do not drop your
computer or subject it to other mechanical shocks.
■ Protect your computer, battery, and hard drive from environmental
hazards such as dirt, dust, food, liquids, temperature extremes, and
overexposure to sunlight.
■ When you move your computer between environments with very
different temperature and/or humidity ranges, condensation may form
on or within the computer. To avoid damaging the computer, allow
sufficient time for the moisture to evaporate before using the
computer.
When taking the computer from low-temperature conditions into a warmer
environment or from high-temperature conditions into a cooler
environment, allow the computer to acclimate to room temperature before
turning or power.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
User's Manual
■ When you disconnect a cable, pull on its connector or on its strain
relief loop, not on the cable itself. As you pull out the connector, keep
it evenly aligned to avoid bending any connector pins. Also, before
you connect a cable make sure both connectors are correctly oriented
and aligned.
■ Before you clean your computer, turn if off, unplug it from its power
source, and remove the battery.
■ Handle components with care. Hold a component such as a memory
module by its edges, not its pins.
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
■ Do not use this product near water, for example, near a bathtub,
washing bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool.
■ Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
■ Do not use the telephone to report a gas leak in the vicinity of the
leak.
■ Use only the power cord indicated in this manual.
■ Replace only with the same or equivalent type battery recommended
by the manufacturer.
■ Dispose of used batteries according to the manufacturer’s
instructions.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
v
User's Manual
EMC Regulatory Information
EU Declaration of Conformity
TOSHIBA declares, that the product: Satellite A30 conforms to the
following Standards:
Supplementary
Information:
“The product complies with the requirements of
the Low Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC and/or the R&TTE
Directive 1999/05/EEC.”
This product is carrying the CE-Mark in accordance with the related
European Directives. Responsible for CE-Marking is TOSHIBA Europe,
Hammfelddamm 8, 41460 Neuss, Germany.
Canadian Regulatory Information (Canada Only)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulation of the Canadian Department of Communications.
Note that Canadian Department of Communications (DOC) regulations
provide, that changes or modifications not expressly approved by
TOSHIBA Corporation could void your authority to operate this
equipment.
This Class B digital apparatus meets all requirements of the Canadian
Interference- Causing Equipment Regulations.
Cet appareil numérique de la class B respecte toutes les exgences du
Règlement sur le matériel brouilleur du Canada.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
User's Manual
CD-ROM, DVD-ROM, CD-R/RW, CD-RW/DVD-ROM,
DVD-R/-RW, DVD-RAM, DVD-Multi drives Safety
Instruction
CD-ROM, DVD-ROM, CD-R/RW, CD-RW/DVD-ROM, DVD-R/-RW, DVD-
RAM and DVD Multi drives employ a laser system. To ensure proper use
of this product, please read this instruction manual carefully and retain for
future reference. Should the unit ever require maintenance, contact an
authorized service location.
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
Sample shown below. Location of the label on the drive and
manufacturing information may vary.
TOSHIBA CORPORATION
1-1, SHIBAURA 1-CHOME
MINATO-KU, TOKYO 105-8001,
JAPAN
CAUTION: This appliance contains a laser system and is classified as a
“CLASS 1 LASER PRODUCT”. To use this model properly, read the
instruction manual carefully and keep it for your future reference. In case
of any trouble with this model, please contact your nearest “AUTHORIZED
service station”. To prevent direct exposure to the laser beam, do not try
to open the enclosure. Use of controls or adjustments or performance of
procedures other than those specified in the owner’s manual may result in
hazardous radiation exposure.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
User's Manual
VORSICHT: Dieses Gerät enthält ein Laser- System und ist als
“LASERSCHUTZKLASSE 1 PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung
sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme
mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen direkten Kontakt mit dem
Laserstrahl zu vermeiden darf das Gerät nicht geöffnet werden.
ADVARSEL: Denne mærking er anbragt udvendigt på apparatet og
indikerer, at apparatet arbejder med laserstråler af klasse 1, hviket
betyder, at der anvendes laserstrlier af svageste klasse, og at man ikke på
apparatets yderside kan bilve udsat for utilladellg kraftig stråling.
APPARATET BOR KUN ÅBNES AF FAGFOLK MED SÆRLIGT
KENDSKAB TIL APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her gengivne advarselsmækning,
som advarer imod at foretage sådanne indgreb i apparatet, at man kan
komme til at udsætte sig for laserstråling.
OBS! Apparaten innehåller laserkomponent som avger laserstråining
överstigande gränsen för laserklass 1.
VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka
lähetää näkymätöntä silmilie vaarallista lasersäteilyä.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
User's Manual
Description on Laser specification
The optical drive such as CD-ROM, DVD-ROM, CD-R/RW,
CD-RW/DVD-ROM, DVD-R/-RW, DVD-RAM and DVD Multi drive that is
used in this computer is equipped with laser. The classification label with
the following sentence is affixed to the surface of the drive.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE 1
KLASS 1 LASER APPARAT
The drive with the above label is certified by the manufacturer that the
drive complies with the requirement for laser product on the date of
manufacturing pursuant to article 21 of Code of Federal Regulations by
the United States of America, Department of Health & Human Services,
Food and Drug Administration.
In other countries, the drive is certified to comply with the requirement
pursuant to IEC 825 and EN60825 on class 1 laser product.
This computer is equipped with the optical drive in the following list
according to the model.
Manufacturer
Matsushita
TOSHIBA
TOSHIBA
Matsushita
TOSHIBA
TOSHIBA
Panasonic
TEAC
Type
SR-8177
SD-C2612
SD-R6112
UJDA750
SD-R2412
SD-R2512
UJ-811B
DW-224E
DV-W22E-85
TEAC
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
User's Manual
Modem warning notice
Conformity Statement
The equipment has been approved to [Commission Decision “CTR21”] for
pan- European single terminal connection to the Public Switched
Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in
the first instance.
Network Compatibility Statement
This product is designed to work with, and is compatible with the
following networks. It has been tested to and found to confirm with the
additional requirements conditional in EG 201 121.
Germany
- ATAAB AN005, AN006, AN007, AN009, AN010,
and DE03, 04, 05, 08, 09, 12, 14, 17
Greece
- ATAAB AN005, AN006 and GR01, 02, 03, 04
Portugal
- ATAAB AN001, 005, 006, 007, 011 and
P03, 04, 08, 10
Spain
- ATAAB AN005, 007, 012, and ES01
- ATAAB AN002
Switzerland
All other
countries/regions
- ATAAB AN003, 004
Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that
specific function on specific national networks can be given.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
x
User's Manual
Important Notice
Copyrighted works including, but not limited to music, video, computer
program, databases are protected by copyright laws. Unless specifically
permitted under applicable copyright laws, you cannot copy, modify,
assign, transmit or otherwise dispose of any copyrighted work with the
consent of the owner of the copyright.
Please take notice that unauthorized copying, modification, assignment,
transmission and disposition may be subject to claims for damages and
penalties.
Lead Warning
Handling the AC adaptor cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or other
reproductive harm.
Wash hands after handling.
HTT (Hyper-Threading Technology)
This is an innovative technology created by Intel and built into new CPUs,
including the one in this computer. It allows a CPU to do two things at
once (in technical terms, to run multiple task threads from a program)
which gives it a faster response time and better performance.
Not all models will come with CPU with HTT technology.
Bluetooth Technology
Some models of the computer will come with Bluetooth technology built
into it. Bluetooth was developed jointly by Ericsson, IBM, Intel, Nokia and
TOSHIBA. It uses a shortwave radio frequency to connect devices such
as cell phones, personal digital assistants, and computers. Essentially,
any device with a Bluetooth chip can connect to and communicate with
any other device with the same type of chip as long as the two are within
range of one another.
Not all models come with Bluetooth technology.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
User's Manual
General Precautions
TOSHIBA computers are designed to optimise safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.
Be certain to read the general precautions below and to note the cautions
included in the text of the manual.
Stress injury
Carefully read the Safety Instruction Manual. It contains information on
prevention of stress injuries to your hands and wrists that can be caused
by extensive keyboard use. Chapter 3, Getting Started, also includes
information on work space design, posture and lighting that can help
reduce physical stress.
Heat injury
■ Avoid prolonged physical contact with the bottom of the computer. If
the computer is used for long periods, its surface can become very
warm. While the temperature will not feel hot to the touch, if you
maintain physical contact with the computer for a long time (if you rest
the computer on your lap, for example) your skin might suffer low-heat
injury.
■ If the computer has been used for a long time, avoid direct contact
with the metal plate supporting the I/O ports. It can become hot.
■ The surface of the AC adaptor can become hot when in use. This
condition does not indicate a malfunction. If you need to transport the
AC adaptor, disconnect it and let it cool before moving it.
■ Do not lay the AC adaptor on a material that is sensitive to heat. The
material could be damaged.
Pressure or impact damage
Do not apply heavy pressure to the computer or subject it to strong
impact.
Excessive pressure or impact can damage computer components or
otherwise cause malfunctions.
PC Card overheating
Some PC cards can become hot with prolonged use. Overheating of a
PC Card can result in errors or instability in the PC Card operation. Also
be careful when you remove a PC Card that has been used for a long
time.
Mobile phone
Use of mobile phones can interfere with the audio system. Computer
operation is not impaired but it is recommended that a distance of 30cm
be maintained between the computer and a mo-bile phone in use.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xii
User's Manual
LCD Display
Small bright dots may appear on your TFT display when you turn on your
PC. Your display contains an extremely large number of thin-
filmtransistors (TFT) and is manufactured using high-precision technology.
Any small bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.
Central Processing Unit (“CPU”) Performance Disclaimer:
CPU performance in your computer product may vary from specifications
under the following conditions:
■ use of certain external peripheral products use of battery power
instead of AC power
■ use of certain multimedia games or videos with special effects
■ use of standard telephone lines or low speed network connections
■ use of complex modelling software, such as high end computer aided
design applications
■ use of computer in areas with low air pressure (high altitude > 1,000
meters or > 3,280 feet above sea level)
■ use of computer at temperatures outside the range of 5ºC to 30ºC
(41ºF to 96ºF) or > 25ºC (77ºF) at high altitude (all temperature
references are approximate).
CPU performance may also vary from specifications due to design
configuration.
Under some conditions, your computer product may automatically
shut-down. This is a normal protective feature designed to reduce the risk
of lost data or damage to the product when used outside recommended
conditions. To avoid risk of lost data, always make back-up copies of
data by periodically storing it on an external storage medium. For
optimum performance, use your computer product only under
recommended conditions. Read additional restrictions in your bundled
documents.
Contact TOSHIBA Technical Service and Support for more information.
CE compliance
This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
TOSHIBA should not guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected
or implemented. In this case the persons who have connected /
implemented those options / cables have to assure that the system
(PC plus options / cables) still fulfils the required standards. To avoid in
general EMC problems following advice should be observed:
■ Only CE marked options should be connected / implemented
■ Only best shielded cables should be connected
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
User's Manual
Working environment
This product was designed to fulfil the EMC (electromagnetic
compatibility) requirements to be observed for so-called "Residential,
commercial and light industry environments".
TOSHIBA do not approve the use of this product in working environments
other than the above mentioned "Residential, commercial and light
industry environments".
For example, the following environments are not approved:
■ Industrial Environments (environments with a mains voltage >230V~)
■ Medical Environments
■ Automotive Environments
■ Aircraft Environments
If this product is supplied with a network port, please refer to the
paragraph "Network connection".
Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA
Europe GmbH.
The consequences of the use of this product in non-approved working
environments may be:
■ Interference with other devices or machines in the near surrounding
area
■ Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the near surrounding area
Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft,
the manufacturer or airline respectively should be asked for permission
before use of this product.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xiv
User's Manual
Network connection (class A warning)
If this product has networking capabilities and will be connected to a
network, Class A radiation limits will be observed (in accordance with
technical conventions). This means that if the product will be used in a
domestic environment, other devices in the near surrounding may suffer
interference. Consequently, please do not use this product in such
environments (for example a living room), otherwise you could be held
responsible for any ensuing interference.
Information on the secure use of the CD-RW
Please adhere to the following information on the use of the CD-RW to
minimise the risk of unsuccessful storing process. As the storing may be
unsuccessful despite your adhering to these information, for example
because of a defective storing medium, you should even if the software
indicates a successful storage, always check if the data has been stored
successfully.
About TOSHIBA Wireless Solution
Not all models come with a built in Wireless LAN card.
Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be
interoperable with any Wireless LAN product that is based on Direct
Sequence Spread Spectrum (DSSS) radio technology, and is compliant
to:
■ The IEEE 802.11 Standard on Wireless LANs, as defined and
approved by the Institute of Electrical and Electronics Engineers.
■ The Wireless Fidelity (WiFi) certification as defined by the WECA
Wireless Ethernet Compatibility Alliance.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xv
User's Manual
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN
devices however is far much less than the electromagnetic energy
emitted by wireless devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in
radio frequency safety standards and recommendations, TOSHIBA
believes Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN may be
restricted by the proprietor of the building or responsible representatives
of the organisation. These situations may for example include:
■ Using the Wireless LAN equipment on board of aeroplanes, or
■ In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless
devices in a specific organisation or environment (e.g. airports), you are
encouraged to ask for authorisation to use the Wireless LAN device prior
to turning on the equipment.
Safety Instruction for Wireless Products
If your computer has wireless function, all safety instructions must be
read carefully and must be fully understood, before attempting to use our
Wireless Products.
This manual contains the safety instructions that must be observed in
order to avoid potential hazards that could result in personal injuries or
could damage your Wireless Products.
Limitation of Liability
For damage occurring due to an earthquake or thunder, fire beyond our
responsibility, action by third party, other accident, intentional or
accidental mistakes by a user, misuse, use under abnormal conditions,
we do not take any responsibility.
For incidental damage (loss of business profit, business interruption, etc.)
occurring due to use or disability of the product, we do not take any
responsibility.
For damage occurring due to non observance of the contents described
in the instruction manual, we do not take any responsibility.
For damage occurring due to erroneous operation or hang up caused by
use in combination with products not related to our company, we do not
take any responsibility.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xvi
User's Manual
Usage Restrictions
Do not use the Wireless Products for controlling equipment:
■ Equipment directly linked with human life corresponds to the
following.
■ Medical equipment such as life support systems, equipment used
in operations, etc.
■ Exhaust systems for gases such as poisonous gas etc. and
exhaust systems for smoke.
■ Equipment that must be set up in compliance with various laws
such as the Fire Services Act, the Construction Standard Act, etc.
■ Equipment corresponding to that mentioned above.
■ Equipment linked with human safety or having a serious influence on
the safe maintenance of public function, etc., because it is not
designed or manufactured for this type of use.
■ Traffic control equipment for air, railroad, road, marine transport,
etc.
■ Equipment used in atomic power plants etc.
■ Equipment corresponding to that mentioned above.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xvii
User's Manual
WARNING
Turn OFF the Wireless Communication switch of Wireless Products in a
congested place, such as a crowded commuter train.
Keep this product away from a cardiac pacemaker at least 22cm.
Radio waves can potentially affect cardiac pacemaker operation, thereby
causing respiratory troubles.
Turn OFF the Wireless Communication switch inside a medical facility or
near medical electric equipment. Do not bring medical electric equipment
close to the product.
Radio waves can potentially affect medical electric equipment, thereby
causing an accident due to malfunction.
Turn OFF the Wireless Communication switch near an automatic door, fire
alarm or other automatic control equipment.
Radio waves can potentially affect automatic control equipment, thereby
causing an accident due to malfunction.
Do not turn ON the Wireless Communication switch in aircraft or in places
that generate or can generate radio interference.
Radio waves can potentially affect them, causing an accident due to
malfunction.
Monitor possible radio interference or other troubles to other equipment
while the product is used. If any effect is caused, turn OFF the Wireless
Communication switch.
Otherwise, radio waves can potentially affect other equipment, thereby
causing an accident due to malfunction.
When using the product in a car, check with the automobile dealer if the
car has an adequate electromagnetic compatibility (EMC).
Radio waves of the product can potentially hamper safe driving.
Depending on car model, the product can rarely affect car electronic
equipment if it is used in a car.
NOTE
Do not use the product in the following places:
Places near a microwave oven where a magnetic field generates and
places where static electricity or radio interference generates.
Depending on environment, radio waves can not reach to the product.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
User's Manual
Regulatory Information
The Wireless LAN Mini PCI Card must be installed and used in strict
accordance with the manufacturer’s instructions as described in the user
documentation that comes with the product. This device complies with
the following radio frequency and safety standards.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xix
Satellite A30 Series
Table of Contents
Manual contents.................................................................................. xxvi
Conventions........................................................................................ xxvii
Abbreviations...................................................................................xxvii
Icons................................................................................................xxvii
Keys.................................................................................................xxvii
Key operation ................................................................................. xxviii
Display............................................................................................ xxviii
Messages ....................................................................................... xxviii
Equipment checklist .............................................................................1-1
Hardware...........................................................................................1-1
Software ............................................................................................1-1
Documentation ..................................................................................1-2
Features .................................................................................................1-2
Processor ..........................................................................................1-2
Memory .............................................................................................1-3
Power ................................................................................................1-3
Disks..................................................................................................1-4
Options..............................................................................................1-4
MODEM/LAN card.............................................................................1-4
Ports ..................................................................................................1-5
Multimedia.........................................................................................1-5
Communications................................................................................1-6
Dimensions........................................................................................1-6
Weight ...............................................................................................1-6
Security..............................................................................................1-7
Special features.....................................................................................1-7
Utilities ...................................................................................................1-9
Options...................................................................................................1-9
User's Manual
xx
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Front with the display closed ...............................................................2-1
Left side..................................................................................................2-3
Right side...............................................................................................2-4
Back side ...............................................................................................2-5
Underside...............................................................................................2-6
Indicators...............................................................................................2-9
Drives ...................................................................................................2-11
3 ½" diskette drive...........................................................................2-11
Optical Media drive..........................................................................2-12
AC adaptor...........................................................................................2-13
Setting up your work space .................................................................3-1
General conditions.............................................................................3-2
Placement of computer .....................................................................3-2
Seating and posture ..........................................................................3-3
Lighting..............................................................................................3-3
Work habits .......................................................................................3-4
Connecting the AC adaptor..................................................................3-5
Opening the display ..............................................................................3-6
Turning on the power............................................................................3-7
Starting up for the first time.................................................................3-7
Turning off the power ...........................................................................3-8
Shut Down mode (Boot mode) ..........................................................3-8
Hibernation mode..............................................................................3-8
Restarting the computer.....................................................................3-12
Restoring the preinstalled software from the Product Recovery
CD-ROM or DVD-ROM........................................................................3-12
Using the Touch pad.............................................................................4-1
Using optical media drives...................................................................4-3
Safety Precautions ............................................................................4-3
Loading compact discs .....................................................................4-4
CD/Digital Mode button.....................................................................4-8
CD/DVD/Audio control buttons .........................................................4-8
Writing DVD/CDs...................................................................................4-9
Before writing ....................................................................................4-9
When writing or rewriting.................................................................4-10
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxi
Table of Contents
Disk care ..............................................................................................4-11
Diskette care....................................................................................4-11
Using the internal modem ..................................................................4-12
Properties menu ..............................................................................4-13
Connecting ......................................................................................4-15
Disconnecting..................................................................................4-15
LAN.......................................................................................................4-16
Connecting LAN cable.....................................................................4-16
Disconnecting LAN cable ................................................................4-17
Wireless communications ..................................................................4-17
Wireless LAN ...................................................................................4-17
Wireless communication switch ......................................................4-17
Wireless communication LED..........................................................4-18
TV-Out ..................................................................................................4-18
Cleaning the computer .......................................................................4-18
Moving the computer..........................................................................4-19
Typewriter keys .....................................................................................5-1
F1 ... F12 function keys .........................................................................5-2
Soft Keys: Alt Gr Key Combinations....................................................5-2
Soft keys: Fn key combinations...........................................................5-2
Emulation keys ..................................................................................5-3
Hotkeys .............................................................................................5-4
Windows special keys .......................................................................5-6
Keypad overlay......................................................................................5-6
Turning on the overlays .....................................................................5-6
Temporarily using overlay (overlay off) ..............................................5-7
Temporarily changing modes ............................................................5-8
Generating ASCII characters................................................................5-8
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxii
Table of Contents
Power conditions ..................................................................................6-1
Power indicators ...................................................................................6-2
Battery indicator ................................................................................6-2
DC IN indicator ..................................................................................6-3
Power indicator..................................................................................6-3
Battery types..........................................................................................6-3
Battery pack ......................................................................................6-4
Real Time Clock battery ....................................................................6-4
Care and use of the battery pack ........................................................6-5
Safety precautions.............................................................................6-5
Charging the batteries .......................................................................6-8
Monitoring battery capacity.............................................................6-10
Maximizing battery operating time ..................................................6-10
Replacing the battery pack ................................................................6-11
Removing the battery pack .............................................................6-12
Installing the battery pack ...............................................................6-13
Power-up modes.................................................................................6-14
Panel power off/on..............................................................................6-14
System automatic Standby/ Hibernation ..........................................6-14
PC cards.................................................................................................7-1
Installing a PC card ...........................................................................7-2
Removing a PC card..........................................................................7-3
Memory expansion................................................................................7-4
Installing memory module..................................................................7-4
Removing memory module................................................................7-6
Additional battery pack.........................................................................7-7
Additional AC adaptor...........................................................................7-7
Parallel printer .......................................................................................7-7
External monitor....................................................................................7-8
Television...............................................................................................7-8
i.LINK (IEEE1394).................................................................................7-11
Precautions......................................................................................7-11
Connecting ......................................................................................7-11
Disconnecting..................................................................................7-12
Security lock........................................................................................7-12
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiii
Table of Contents
Problem solving process......................................................................8-1
Preliminary checklist..........................................................................8-2
Hardware and system checklist...........................................................8-3
Self test..............................................................................................8-4
Power ................................................................................................8-4
Overheating power down ..................................................................8-5
AC power...........................................................................................8-5
Battery...............................................................................................8-6
Keyboard...........................................................................................8-7
LCD panel..........................................................................................8-7
Hard disk drive ..................................................................................8-8
Multidrive & DVD-R/RW.....................................................................8-9
Printer..............................................................................................8-11
PC Card...........................................................................................8-11
Infrared port.....................................................................................8-12
Sound system..................................................................................8-12
USB .................................................................................................8-14
TV output signal...............................................................................8-14
Standby/Hibernation........................................................................8-15
Modem ............................................................................................8-16
LAN..................................................................................................8-17
Wireless LAN ...................................................................................8-17
Monitor ............................................................................................8-18
i.LINK (IEEE1394).............................................................................8-18
If you need further assistance............................................................8-19
Before you call.................................................................................8-19
Where to write .................................................................................8-19
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiv
Table of Contents
Appendix E If your computer is stolen................................... E-1
Appendix F ASCII Character Codes....................................... F-1
Glossary...................................................................................... F-1
Index ........................................................................................... F-1
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxv
Satellite A30 Series
Preface
Congratulations on your purchase of a Satellite A30 series computer. This
powerful notebook computer provides excellent expansion capability,
including multimedia devices, and it is designed to provide years of
reliable, high-performance computing.
This manual explains how to set up and begin using your Satellite A30
series computer. It also provides detailed information on configuring your
computer, basic operations and care, using optional devices and
troubleshooting.
If you are a new user of computers or if you’re new to portable
computing, first read over the Introduction and The Grand Tour chapters
to familiarize yourself with the computer’s features, components and
accessory devices. Then read Getting Started for step-by-step
instructions on setting up your computer.
If you are an experienced computer user, please continue reading the
preface to learn how this manual is organized, then become acquainted
with this manual by browsing through its pages. Be sure to look over the
Special features section of the Introduction, to learn about features that
are uncommon or unique to the computer.
Manual contents
This manual has eight chapters, three appendixes, a glossary and an
index.
Chapter 1, Introduction, is an overview of the computer’s special features,
utilities, and options.
Chapter 2, The Grand Tour, identifies the components of the computer
and briefly explains how they function.
Chapter 3, Getting Started, provides a quick overview of how to begin
operating your computer and gives tips on safety and designing your
work area. Be sure to read the sections on setting up the operating
system and on restoring the preinstalled software.
Chapter 4, Operating Basics, includes instructions on using the following
devices: Touch pad, the optical media drives, the internal modem, LAN
and wireless LAN. It also provides tips on care of the computer, diskettes
and DVD/CD-ROMs.
User's Manual
xxvi
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Chapter 5, The Keyboard, describes special keyboard functions including
the keypad overlay and hotkeys.
Chapter 6, Power and Power-Up Modes, gives details on the computer’s
power resources.
Chapter 7, Optional Devices, describes the optional hardware available.
Chapter 8, Troubleshooting, provides helpful information on how to
perform some diagnostic tests, and suggests courses of action if the
computer doesn’t seem to be working properly.
The Appendixes provide technical information about your computer.
The Glossary defines general computer terminology and includes a list of
acronyms used in the text.
The Index quickly directs you to the information contained in this manual.
Conventions
This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.
Abbreviations
On first appearance, and whenever necessary for clarity, abbreviations
are enclosed in parentheses following their definition. For example: Read
Only Memory (ROM). Acronyms are also defined in the Glossary.
Icons
Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing
information on.
Keys
The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the key top symbols as they
appear on the keyboard. For example, Enter identifies the Enter key.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxvii
Preface
Key operation
Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign
(+). For example, Ctrl + C means you must hold down Ctrl and at the
same time press C. If three keys are used, hold down the first two and at
the same time press the third.
Display
Names of Windows® or icons or text
generated by the computer that appears on
its display screen is presented in the type
face you see to the left.
S
ABC
Text generated by the computer is usually
preceded by the screen icon.
Messages
Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.
Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your
equipment.
Please read. A note is a hint or advice that helps you make best use of
your equipment.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
xxviii
Satellite A30 Series
Chapter 1
Introduction
This chapter provides an equipment checklist, and it identifies the
computer’s special features, options and accessories.
Basic features are described in a separate pamphlet.
Some of the features described in this manual may not function properly if
you use an operating system that was not preinstalled by TOSHIBA.
Equipment checklist
Carefully unpack your computer. Save the box and packing materials for
future use. Check to make sure you have all the following items:
Hardware
■ Satellite A30 Series Portable Personal Computer
■ Universal AC adaptor and power cord
■ USB FDD (optional)
Software
■ The following software preinstalled on your hard disk:
■ Microsoft Windows XP
■ TOSHIBA Utilities
■ Display Driver
■ Touch pad Driver
■ Sound Driver
■ Miscellaneous Drivers (depending on the model purchased:
Modem, LAN, Wireless LAN,)
■ Online Help
User's Manual
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
■ Product Recovery CD-ROM or DVD-ROM
The system may not function properly if you use drivers that are not
preinstalled or distributed by TOSHIBA.
Documentation
■ Your computer’s documentation:
■ Satellite A30 Series Personal Computer User’s Manual (this
manual)
■ Satellite A30 Series Quickstart
■ Microsoft® Windows XP manual package
■ Safety Instruction Manual
■ Warranty Information
If any of the items are missing or damaged, contact your dealer
immediately.
Features
The Satellite A30 series computer uses TOSHIBA’s advanced Large Scale
Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS)
technology extensively to provide compact size, minimum weight, low
power usage, and high reliability. This computer incorporates the
following features and benefits:
Processor
Processor
Some configurations are equipped with a Intel®
Celeron® processor, which incorporates a
128KB level 2 cache memory.
■ 2.3 GHz Mobile Intel® Celeron® Processor
or greater
Some configurations are equipped with a Intel®
Pentium® 4 processor , which incorporates a
512KB level 2 cache memory.
■ 2.40 GHz Intel® Pentium® 4 Processor or
greater
■ 2.66 GHz Intel® Pentium® 4 Processor with
HT Technology or greater
Other processors may be introduced in the
future.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-2
Introduction
Memory
Slots
Two 200-pin +2.5V DDR SO-DIMM connectors,
supporting DDR memory cards. Maximum
upgradable to 2GB by two 1GB SO-DIMM
module
128KB/512KB/1MB L2 Cache on CPU
Video RAM
up to 64MB or 128MB Integrated shared solution
with main memory
Power
Battery pack
12 cells Li-Ion 18650 size smart battery pack
with 95Wh capacity Li-Ion Battery.
Discharge time with main battery in standby
mode is approximately 4 days.
Discharge time with main battery in shutdown
mode is approximately 1 month.
12 hours or longer charging time to 100%
(system on).
RTC battery
AC adaptor
The computer has an internal battery to back up
the internal Real Time Clock (RTC) and calendar.
It is good without an external power source for 1
month.
The universal AC adaptor provides power to the
system and recharges the batteries when they
are low. It comes with a detachable power cord.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3
Introduction
Disks
Fixed hard disk
One 30GB/40GB/60GB/80GB hard drive
Bus Master IDE
9.5m/m 2.5” HDD Support
Ultra 100 DMA
Other hard disks may be introduced in the
future.
Optical media drive
5.25” 12.7mm height DVD Multi drive,
DVD-R/-RW, DVD-ROM, or CD-RW/DVD-ROM
device.
Computers in this series can be configured with multiple types of optical
media drive. For more information on the optical media drives available,
talk to your dealer. More information on using the optical media drive can
be found in Chapter 4, Operating Basics.
Options
Options
128MB/256MB/512MB/1GB SO-DIMM modules
MINI PCI module (802.11a, 802.11b, 802.11a+b,
802.11g, 802.11a+g) wireless LAN module
PCMCIA Card
PCMCIA Card
One type II card socket
SRAM, OTPROM, FLASH ROM and mask ROM
memory card
MODEM/LAN card
MODEM/LAN card
1.8" 10.5mm removable ATA Device
Card bus card
ACPI 1.0b compliant
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-4
Introduction
Ports
External monitor
15-pin analog VGA port supports VESA DDC2B
compatible functions.
Parallel port
S-Video port
One 25-pin parallel port, EPP/ECP capability.
One TV-out connector.
Universal Serial Bus The computer has up to three Universal Serial
Bus (USB) ports (depending on model purchase)
that comply with the USB 2.0 standard, enabling
data transfer speeds more than 40 times faster
than USB 1.1 (which this computer also
supports.) The USB drives may be used to
transfer data at Low, Full, and High speeds.
i.LINK (IEEE1394)
Infrared
This port enables high-speed data transfer
directly from external devices such as digital
video cameras.
The serial infrared port is compatible with the
Infrared Data Association (IrDA 1.1) standards. It
enables cableless 4 Mbps, 1.152 Mbps, 115.2
kbps, 57.6 kbps, 38.4 kbps, 19.2 kbps or 9.6
kbps data transfer with IrDA 1.1 compatible
external devices.
Multimedia
Sound system
Incorporates a Wave Table Synthesizer for
advanced sound applications including 3D
games, DVD movie playback and Internet
communications.
TV-out button
Sets your display device to TV (video-out). Press
it to switch back and forth between TV and the
built-in display.
Mode control button Launches various CD, DVD and Digital audio
functions. Refer to Chapter 4, Operating Basics,
for more details.
Audio/Video controls Let you use the computer’s fixed optical media
drive as a stand-alone audio CD-player or MP3
player. You can also use the buttons to control
the computer’s DVD video player when the
system is on.
Headphone jack
Outputs analog audio.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-5
Introduction
Microphone jack
Line-in jack
A 3.5 mm mini microphone jack enables
connection of a three-conductor mini jack for
monaural microphone input.
A standard 3.5 mm line-in jack enables
connection of a stereo device for audio input.
Communications
Modem
An internal modem provides capability for data
and fax communication. It supports V.90 or V.92
depending on the region. The speed of data
transfer and fax depends on analog telephone
line conditions. It has a modem jack for
connecting to a telephone line.
LAN
The computer has built-in support for Ethernet
LAN (10 megabits per second, 10BASE-T) and
Fast Ethernet LAN (100 megabits per second
100 BASE- Tx).
Wireless LAN
Some computers in this series are equipped with
a wireless LAN mini-PCI card that is compatible
with other LAN systems based on Direct
Sequence Spread Spectrum radio technology
that complies with the IEEE 802.11a, 802.11b,
802.11a+b, 802.11g, 802.11a+g Standards.. It
supports data transfer up to 54 Mbits/s. It has a
Frequency Channel Selection (5 GHz or 2.4 GHz)
and allows roaming over multiple channels.
Dimensions
Dimensions
332.4mm x 280mm x 38.2 mm (Front)/ 45.3 mm
(Rear)
Weight
Weight
7.61lb/3,45kg for 14” TFT LCD/DVD Multi drive
module
7.72lb/3,5kg for 15,0” TFT LCD/DVD Multi drive
module
The actual weight varies depending on the
configuration of the model purchased.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-6
Introduction
Security
Security
Boot-up password protection
Two levels password architecture (Supervisor
Password & User Password)
Special features
The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.
Hotkeys
Key combinations let you quickly modify the
system configuration directly from the keyboard
without running a system configuration program.
Display Automatic
Power Off
This feature automatically cuts off power to the
internal display when there is no input from the
keyboard or pointing device for a time specified.
Power is restored when any key is pressed or
when there is input from a pointing device. You
can specify the time in the TOSHIBA Power
Management Utility.
HDD Automatic
Power Off
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk
is accessed. You can specify the time in the
TOSHIBA Power Management Utility.
System Automatic
This feature automatically brings the system to
Standby/Hibernation standby mode or Hibernation mode when there
is no input or hardware access for a time
specified. You can specify the time and select
either System Standby or System Hibernate in
the TOSHIBA Power Management Utility.
Keypad Overlay
A ten-key pad is integrated into the keyboard.
Refer to the Keypad overlay section in Chapter 5,
Keyboard, for instructions on using the keypad
overlay.
Battery Save Mode
Instant Security
This feature lets you save battery power. You
can specify the Battery Save Mode in the
TOSHIBA Power Management Utility.
A hotkey function blanks the screen providing
quick and easy data security.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-7
Introduction
Panel Power Off / On This feature turns power to the computer off
when the display panel is closed and turns it
back on when the panel is opened. You can
specify the setting in the TOSHIBA Power
Management Utility.
Low Battery
Automatic
Hibernation
When battery power is exhausted to the point
that computer operation cannot be continued,
the system automatically enters Hibernation and
shuts down. You can specify the setting in the
TOSHIBA Power Management Utility.
Hibernation
This feature lets you turn off the power without
exiting from your software. The contents of main
memory is saved to the hard disk, when you turn
on the power again, you can continue working
right where you left off. Refer to the Turning off
the power section in Chapter 3, Getting Started,
for details.
Standby
In Standby mode, power to the system remains
on, but the CPU and all other devices are in
sleep mode. When the computer is in standby
mode, the Power LED flashes in amber. To enter
Standby mode click Start, click Shut Down,
select Standby and click OK. The computer
enters Standby mode regardless of the
Hibernate setting.
Before entering Standby mode, be sure to save your data.
Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-8
Introduction
Utilities
This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility’s online manual, help files or
readme files.
TOSHIBA Power
Management Utility
There are two ways to display the Windows XP
Control Panel. The default is Category View.
TOSHIBA Power Management Utility is under the
Performance and Maintenance item.
TOSHIBA Console
TOSHIBA Console is a graphical user interface
that provides easy access to help and services.
It is the default function launched by the
TOSHIBA Console button.
Options
You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:
Memory Modules
Two memory modules can be installed in the
computer.
Use only PC2100 or 2700 compatible memory modules. See your
TOSHIBA dealer for details.
Battery Pack
An additional battery pack can be purchased
from your TOSHIBA dealer. Use it as a spare to
increase your computer operating time.
Universal AC Adaptor If you use your computer at more than one site
frequently, it may be convenient to purchase an
additional AC adaptor for each site so you will
not have to carry the adaptor with you.
Security Lock
A slot is available to attach a security cable to
the computer to deter theft.
Wireless LAN Kit
This option enables wireless LAN functions in
computers that do not have wireless
preinstalled. It is installed by dealers only.
USB FDD Kit
Lets you attach a floppy diskette device to your
computer by means of a USB cable.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
1-9
Satellite A30 Series
Chapter 2
The Grand Tour
This chapter identifies the various components of your computer.
Become familiar with each component before you operate the computer.
Front with the display closed
The figure below shows the computer front with its display panel in the
closed position.
CD/DVD/AUDIO
CONTROL BUTTONS*
SYSTEM INDICATORS
DISPLAY LATCH
CD/DVD EJECT BUTTON
LEFT SPEAKER
OPTICAL MEDIA DRIVE
RIGHT SPEAKER
*Not available on all models
Front of the computer with display closed
System Indicators
The system indicators provide icons for
monitoring the status of Disc Player, Audio
Music, DC IN, Power, Battery, Built-in HDD and
Diskette/Optical Media drive. Details are given
later in this chapter.
Left & Right
Speakers
The left and right speakers are placed along the
front edges.
User's Manual
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Display Latch
Mode
This latch secures the LCD panel in its closed
position. Slide the latch to open the display.
Press this button to cycle between various CD,
DVD and audio functions. Refer to Chapter 4,
Operating Basics, for details.
Play/Pause
Stop
Press this button to begin playing an audio CD, a
DVD movie or digital audio files. This button also
acts as a Pause button. Refer to Chapter 4,
Operating Basics for details.
Stops playing the CD, DVD or digital audio. Refer
to Chapter 4, Operating Basics, for details.
Previous/Fast
Rewind
Skips back to previous tracks. If held down while
a song is playing, it fast rewinds through it. Refer
to Chapter 4, Operating Basics, for details.
Next/Fast Forward
Skips forward to previous tracks. If held down
while a song is playing, it fast forwards through
it. Refer to Chapter 4, Operating Basics, for
details.
If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.
Optical Media Drive
The computer is configured with a full-size
optical media drive module that lets you run
either 12 cm (4.72") or 8 cm (3.15") discs without
using an adaptor. See the Drives section in this
chapter for technical specifications on each drive
and to Chapter 4, Operating Basics, for
information on using the drive and caring for
discs.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2
The Grand Tour
Left side
The figure below shows the computer left side.
WIRELESS
COMMUNICATION
SWITCH
LINE-IN JACK
HEADPHONE JACK
LEFT SPEAKER
SECURITY LOCK
WIRELESS
COMMUNICATION LED
MICROPHONE JACK
VOLUME CONTROL
The left side of the computer
Security Lock
A security cable can attach to this slot and be
used to anchor your computer to a desk or other
large object to deter theft.
Headphone Jack
The Headphone Jack lets you connect stereo
headphones or other audio-output devices such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.
Microphone Jack
Line-In Jack
A standard 3.5 mm mini microphone jack
enables connection of a three conductive type
mini-jack for a monaural microphone.
A standard 3.5 mm min line-in jack enables
connection of a stereo device for audio input.
Wireless
Communication
The Wireless Communication Switch turns on
the wireless networking transceiver. The
Wireless Communication LED on the left side
lights to indicate that wireless networking is
turned on. It is not available in all configurations.
Volume Control
Speakers
Use this dial to adjust the volume of the stereo
speakers.
The audio speakers. Volume can be controlled
either with the volume dial on the left side of the
computer, or with the Volume setting in
Windows XP.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3
The Grand Tour
Right side
The figure below shows the computer right side.
PC CARD SLOT
RIGHT SPEAKER
iLINK PORT
INFRARED PORT
(optional)
The right side of the computer
i.LINK (IEEE1394)
Port
Connect an external device, such as a digital
video camera to this port for high-speed data
transfer. This only applies the i.Link model of the
computer. Not all versions have this feature. This
feature may not be present, depending on your
configuration.
PC Card Slot
A PC Card slot can accommodate one 5 mm
PC Card (Type II). You can install any industry
standard PC Card such as a SCSI adaptor,
Ethernet adaptor or flash memory card.
Keep foreign objects out of the PC Card slot. A pin or similar object can
damage the computer.
Infrared port
(optional)
This infrared port is compatible with Infrared
Data Association (IrDA) Fast InfraRed (FIR)
standards. It enables cableless 4 Mbps data
transfer with IrDA 1.1 compatible external
devices. Not all models will come with a Infrared
port.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-4
The Grand Tour
Back side
The figure below shows the computer back panel.
LAN JACK
PARALLEL PORT
S-VIDEO*
COOLING VENT
USB PORTS
MODEM JACK
EXTERNAL MONITOR
PORT
DC IN 19 V JACK
The back side of the computer
Universal Serial Bus The Universal Serial Bus (USB 2.0) ports enable
(USB) Ports
chain connection of a number of USB-equipped
devices. For example, you might connect a
USB-HUB to the computer, then connect a
keyboard to the USB-HUB and a mouse to the
keyboard.
Modem Jack
In areas where an internal modem is installed as
standard equipment, there is a modem jack that
lets you use a modular cable to connect the
modem directly to a telephone line. The modem
is not supported in some marketing regions.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
LAN Jack
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T) and Fast
Ethernet LAN (100 megabits per second,
100BASE-Tx).
Ether
Do not cover the cooling vent or otherwise obstruct it. Doing so may
cause the computer to overheat and result in damage.
Parallel Port
This Centronics-compatible 25-pin parallel port
is used to connect a parallel printer or other
parallel device. This port supports Extended
Capabilities Port (ECP) standard.
External Monitor Port This 15-pin port lets you connect an external
video display to the computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-5
The Grand Tour
S-Video
Plug a 4-pin S- video cable into this connector
for output of NTSC or PAL signal to a VCR or TV.
This feature may not be present, depending on
your configuration.
DC IN 19 V Jack
The DC-IN socket is where you plug in the AC
adapter.
DC IN 19V
Underside
The figure below shows the underside of the computer. Make sure the
display is closed before turning over your computer.
EXPANSION MEMORY
SOCKET
WIRELESS LAN SOCKET
INLET VENTS
OPTICAL MEDIA DRIVE
BATTERY LATCH
BATTERY PACK
The bottom of the computer
Wireless LAN Socket Consult your TOSHIBA dealer for installation of a
Wireless LAN card.
Expansion Memory
Socket
Use this socket to install a memory module to
increase your computer’s memory. Refer to the
Memory Expansion section in Chapter 7,
Optional Devices.
Battery
The battery pack powers the computer when the
AC adaptor is not connected. For detailed
information on the battery pack, refer to
Chapter 6, Power and Power- Up Modes.
Battery Latch
Fixed Bay
Slide this latch to remove the battery pack.
Houses the optical drive
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-6
The Grand Tour
Front with the display open
The figure below shows the front of the computer with the display open.
To open the display, slide the display latch on the front of the display and
lift up. Position the display at a comfortable viewing angle.
INTERNET
BUTTON*
TOSHIBA CONSOLE
BUTTON*
DISPLAY SCREEN
TV-OUT BUTTON*
LCD LID SWITCH
POWER BUTTON
KEYBOARD INDICATORS
TOUCH PAD
TOUCH PAD CONTROL
BUTTONS
*Not available on all models
The front with the display open
Touch pad
A pointer control device located in the centre of
the palm rest is used to control the on-screen
pointer. Refer to the Using the Touch pad
section in Chapter 4, Operating Basics.
Touch pad Control
Buttons
Control buttons below the Touch pad let you
select menu items or manipulate text and
graphics designated by the on-screen pointer.
Power Button
Press the power button to turn the computer’s
power on and off.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-7
The Grand Tour
Internet Button
Press this button to launch an Internet browser.
If the computer’s power is off, you can press this
button to turn on the computer’s power and
launch the browser automatically in one step.
This feature may not be present, depending on
your configuration.
TOSHIBA Console
Button
You can associate an application to this button
for automatic launch. If the computer is off,
pressing this button starts the computer and
launches the associated program automatically.
This feature may not be present, depending on
your configuration.
TV-Out Button
Switches the display over to video or television if
a device has been connected through the
TV-Out port with an S-video cable. While in this
mode, you cannot use your computer’s built-in
screen. This feature may not be present,
depending on your configuration.
Keyboard Indicators The keyboard indicators provide icons to let you
the caps lock, arrow mode and numeric mode
functions. Details are given later in this chapter.
Display Hinges
Display Screen
The display hinges hold the display screen at
easy-to- view angles.
The LCD displays high-contrast text and
graphics at up to 1920 x 1440 pixels. Refer to
Appendix E. When the computer operates on the
AC adaptor the display screen’s image will be
somewhat brighter than when it operates on
battery power. The lower brightness level is
intended to save battery power.
To prolong the life of your monitor, use a screen saver when you are not
working the computer and it is idle. Default screen saver time-out setting
is recommended
LCD Lid Switch
This switch senses when the LCD panel is
closed or opened and activates the Panel Power
Off/On feature.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-8
The Grand Tour
Indicators
The figures below show the system indicator lights, which light when
various computer operations are in progress.
CD/DVD
DIGITAL
DC IN
POWER
BATTERY BUILT-IN HDD OPTICAL
MEDIA/FDD
The system indicators
CD/DVD
The CD/DVD indicator glows green when the
computer is in CD mode. This indicator is not
present on all models.
Digital
The Digital indicator glows green when the
computer is in Digital mode. This indicator is not
present on all models.
DC IN
Power
The DC IN indicator glows green when DC
power is supplied from the AC power adaptor.
The Power indicator glonws green when the
computer is on. If you put the computer in Stand
by mode it pulses amber. In Hibernation mode, it
doesn’t glow.
Battery
The Battery indicator indicates the condition of
the battery’s charge. Green indicates full charge,
amber indicates battery charging and flashing
amber indicates a low battery charge. Refer to
Chapter 6, Power and Power- Up Modes.
Built-in HDD
This indicator glows green when the computer is
accessing the hard disk.
Optical Media
This indicator glows green when the computer is
accessing an optical media disc.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-9
The Grand Tour
Caps
Lock
ARROW MODE
NUMERIC MODE
CAPS LOCK
The keyboard indicators
Arrow Mode
When the Arrow mode icon lights green, you can
use the keypad overlay (light grey labelled keys)
as cursor keys. Refer to the Keypad Overlay
section in Chapter 5, The Keyboard.
Numeric Mode
Caps Lock
You can use the keypad overlay (light grey
labelled keys) for numeric input when the
Numeric mode icon lights green. Refer to the
Keypad Overlay section in Chapter 5, The
Keyboard.
The Caps Lock LED lights when you press the
Caps Lock key. When this light is on, pressing a
letter key on the keyboard produces an
uppercase (capital) letter.
Caps
Lock
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-10
The Grand Tour
Drives
This section describes the optical media drive and the USB FDD
(optional).
3 ½" diskette drive
DISK-IN-USE INDICATOR
DISKETTE SLOT
EJECT BUTTON
The diskette drive
An externally connected 3 ½" diskette drive lets you use either double
density (720 KB) or high density (1.44 MB) 3 ½" diskettes for data transfer
and storage.
Diskette Slot
Eject Button
Insert diskettes into this slot.
When a diskette is fully seated in the drive, the
eject button pops out. To remove a diskette,
push in the eject button and the diskette pops
out.
Check the disc-in-use indicator when you use the diskette drive. Do not
press the eject button or turn off the computer while the light glows.
Doing so could destroy damage the diskette or drive.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-11
The Grand Tour
Optical Media drive
The full-size Optical Media drive module lets you play from and record
data to rewritable DVDs and CDs as well as run either 12 cm (4.72") or
8 cm (3.15") discs without using an adaptor. Use the preinstalled
software, Drag ’n Drop, to write DVDs and CDs. Your drive may support
the following formats, depending on model purchased:
■ DVD-ROM
■ DVD-Video
■ DVD-R
■ CD-ROM XA Mode 2
■ CD-R
■ CD-R/W
■ DVD-RW
■ CD-I Ready
■ CD-Extra (CD+)
■ CD-DA
■ CD-ROM Mode 1, Mode 2
■ CD-Text
■ Photo CD™
Check the disc-in-use indicator when you use the Optical Media drive.
Do not press the eject button, disconnect a drive or turn off the computer
while the light is glowing. Doing so could damage the CD/DVD or the
drive. Optical Media drives and media are manufactured according to the
specifications of six marketing regions. When you purchase DVD media,
make sure it matches your drive, otherwise it will not play properly.
Code
Region
1
2
3
4
Canada, United States
Japan, Europe, South Africa, Middle East
Southeast Asia, East Asia
Australia, New Zealand, Pacific Islands, Central
America, South America, Caribbean
5
6
Russia, Indian Subcontinent, Africa, North Korea,
Mongolia
China
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-12
The Grand Tour
AC adaptor
The AC adaptor converts AC power to DC power and reduces the voltage
supplied to the computer. It can automatically adjust to any voltage from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you
to use the computer in almost any country/region. To recharge the
battery, simply connect the AC adaptor to a power source and the
computer. See Chapter 6, Power and Power-Up Modes, for details.
The AC adaptor
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. Please use the bundled
adaptor.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2-13
Satellite A30 Series
Chapter 3
Getting Started
This chapter provides basic information to get you started using your
computer. It covers the following topics:
■ Setting up your work space — for your health and safety Connecting
the AC adaptor
■ Opening the display
■ Turning on the power
■ Starting up for the first time
■ Turning off the power
■ Restarting the computer
■ Restoring the preinstalled software from the Product Recovery
CD-ROM or DVD-ROM
All users should be sure to carefully read the section Starting up for the
first time.
Setting up your work space
Establishing a comfortable work site is important for you and your
computer. A poor work environment or stressful work habits can result in
discomfort or serious injury from repetitive strain to your hands, wrists or
other joints. Proper ambient conditions should also be maintained for the
computer’s operation. This section discusses the following topics:
■ General conditions
■ Placement of the computer and peripheral devices
■ Seating and posture
■ Lighting
■ Work habits
User's Manual
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
General conditions
In general, if you are comfortable, so is your computer, but read the
following to make sure your work site provides a proper environment.
■ Make sure there is adequate space around the computer for proper
ventilation.
■ Make sure the AC power cord connects to an outlet that is close to
the computer and easily accessible.
■ The temperature should be 5 to 30 degrees Centigrade and the
relative humidity should be 10 to 90 percent.
■ Avoid areas where rapid or extreme changes in temperature or
humidity may occur.
■ Keep the computer free of dust, moisture, and exposure to direct
sunlight.
■ Keep the computer away from heat sources, such as electric heaters.
■ Do not use the computer near liquids or corrosive chemicals.
■ Some components in the computer, including data storage media,
can be damaged by magnets. Do not place the computer near
magnetic objects or bring magnetic objects close to the computer. Be
careful of objects, such as stereo speakers, that produce strong
magnetic fields during operation. Also, be careful with metal objects,
such as bracelets, which can be inadvertently magnetized.
■ Do not operate the computer in close proximity to a mobile phone.
■ Leave ample ventilation room for the fan. Ensure that there are no
obstructions around any of the system inlets or exhaust vents.
Placement of computer
Position the computer and peripheral devices to provide comfort and
safety.
■ Set the computer on a flat surface at a comfortable height and
distance. The display should be no higher than eye level to avoid eye
strain.
■ Place the computer so that it is directly in front of you when you work
and make sure you have adequate space to easily operate other
devices.
■ Allow adequate space behind the computer to let you freely adjust the
display.
■ The display should be angled to reduce glare and maximize visibility.
If you use a paper holder, set it at about the same height and distance
as the computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2
Getting Started
Seating and posture
The height of your chair in relation to the computer and keyboard as well
as the support it gives your body are primary factors in reducing work
strain. Refer to the following tips and to figure 3-1.
90
1
Posture and positioning of the computer
■ Place your chair so that the keyboard is at or slightly below the level
of your elbow. You should be able to type comfortably with your
shoulders relaxed.
■ Your knees should be slightly higher than your hips. If necessary, use
a foot rest to raise the level of your knees to ease pressure on the
back of your thighs.
■ Adjust the back of your chair so it supports the lower curve of your
spine.
■ Sit straight so that your knees, hips and elbows form approximately
90 degree angles when you work. Do not slump forward or lean back
too far.
Lighting
Proper lighting can improve legibility of the display and reduce eye strain.
■ Position the computer so that sunlight or bright indoor lighting does
not reflect off the screen. Use tinted windows, shades or other screen
to eliminate sun glare.
■ Avoid placing the computer in front of bright light that could shine
directly in your eyes.
■ If possible, use soft, indirect lighting in your computer work area. Use
a lamp to illuminate your documents or desk, but be sure to position
the lamp so that it does not reflect off the display or shine in your
eyes.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3
Getting Started
Work habits
A key to avoiding discomfort or injury from repetitive strain is to vary your
activities. If possible, schedule a variety of tasks into your work day. If you
must spend long periods at the computer, finding ways to break up the
routine can reduce stress and improve your efficiency.
■ Sit in a relaxed posture. Good positioning of your chair and equipment
as described earlier can reduce tension in your shoulders or neck and
ease back strain.
■ Vary your posture frequently.
■ Occasionally stand up and stretch or exercise briefly.
■ Exercise and stretch your wrists and hands a number of times during
the day.
■ Frequently, look away from the computer and focus your eyes on a
distant object for several seconds, for example 30 seconds every 15
minutes.
■ Take frequent short breaks instead of one or two long breaks, for
example, two or three minutes every half hour.
■ Have your eyes examined regularly and visit a doctor promptly, if you
suspect you might be suffering from a repetitive strain injury.
■ Please check every couple of months to ensure the fan inlets or
exhaust vents (see sections 2-5 and 2-7) are unobstructed. Clean
them if necessary.
A number of books are available on ergonomics and repetitive strain
injury or repetitive stress syndrome. For more information on these topics
or for pointers on exercises for such stress points as hands and wrists,
please check with your library or book vendor. Also refer to the
computer’s Safety Instruction Manual.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-4
Getting Started
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want
to operate from AC power. It is also the fastest way to get started,
because the battery pack will need to be charged before you can operate
from battery power. The AC adaptor can be connected to any power
source supplying from 100 to 240 volts and 50 or 60 hertz. For details on
using the AC adaptor to charge the battery pack, refer to Chapter 6,
Power and Power-Up Modes.
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. Please use the bundled
adaptor.
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
Handling the AC adaptor cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or other
reproductive harm. Wash your hands after handling.
2. Connect the AC adaptor to the DC output plug to the DC IN input port
on the back of the computer.
Connecting the adaptor to the computer
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-5
Getting Started
3. Plug the power cord into alive wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to
unlatch the display panel.
Opening the display
2. Lift the panel up and adjust it to the best viewing angle for you.
Use reasonable care when opening and closing the display panel.
Opening it vigorously or slamming it shut could damage the computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-6
Getting Started
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section Starting up for the
first time in this chapter.
1. Open the display panel.
2. Press and hold the computer’s power button for two or three seconds
and release.
Turning on the power
Starting up for the first time
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows XP Startup Screen Logo. Follow the on-screen
directions for each screen. During setup, you can click the Back button to
return to the previous screen. Be sure to read the Windows End User
License Agreement display carefully.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-7
Getting Started
Turning off the power
The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Standby mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data is saved and
the computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk or to a diskette.
2. Make sure all disk activity has stopped, then remove the
CD/DVD-ROM or diskette.
Make sure the Built-in HDD and optical media drive are off. If you turn
off the power while a disk is being accessed, you can lose data or damage
the disk.
3. Click start and click Turn Off Computer. From the Turn Off
Computer window click Turn Off.
4. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Hibernation mode
The hibernation feature saves the contents of memory to the hard disk
when the computer is turned off. The next time the computer is turned on,
the previous state is restored. The hibernation feature does not save the
status of peripheral devices.
While entering hibernation mode, the computer saves the contents of
memory to the HDD. Data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
Built-in HDD indicator to go out.
Do not install or remove a memory module while the computer is in
hibernation mode. Data will be lost.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-8
Getting Started
Benefits of Hibernation
The hibernation feature provides the following benefits:
■ Saves data to the hard disk when the computer automatically shuts
down because of a low battery.
For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Management
utility: the Power Save Modes tab and the Advanced tab. Otherwise, the
computer will shut down in Standby mode. If battery power becomes
depleted, data saved in Standby will be lost.
■ You can return to your previous working environment immediately
when you turn on the computer.
■ Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System hibernate feature.
■ You can use the panel power off feature.
Starting Hibernation
You can also enable Hibernation by pressing Fn + F4. See Chapter 5,
Keyboard, for details.
To enter Hibernation mode, follow the steps below.
1. Click Start.
2. Select Turn Off Computer.
3. Open the Turn Off Computer dialog box. Hibernate is not displayed.
4. Press the Shift key. The Standby item will change to Hibernate.
5. Select Hibernate.
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press
the power button or close the lid. First, however, make the appropriate
settings according to the steps below.
1. Open the Control Panel.
2. Open Performance and Maintenance and open TOSHIBA Power
Management.
3. Select the Advanced tab.
4. Select Enable hibernate support.
5. Enable the desired Hibernation settings for When I press the power
button and When I close the lid of my portable computer.
6. Click the OK button.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-9
Getting Started
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a
moment to save current memory data to the hard disk. During this time,
the Built-in HDD indicator will light. After you turn off the computer and
memory is saved to the hard disk, turn off the power to any peripheral
devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Standby mode
In standby mode the power remains on, but the CPU and all other
devices are in sleep mode.
If the computer is not used or accessed in any way, including receipt of
e-mail, for 15 minutes when the AC adaptor is connected, the computer
will automatically enter Standby mode (TOSHIBA Power Management
Utility default). To restore operation, press the power button.
If a network application is active when the computer automatically enters
Standby, it might not be restored when the computer wakes up from
standby. To prevent the computer from automatically entering standby
mode, disable Standby in the TOSHIBA Power Management Utility. Open
the TOSHIBA Power Management Utility and click the Power Save Modes
tab. Next select either an AC Power or Battery Power option and then
click details. When the details page comes up, you can disable the
Standby setting be moving the slider to Never. That action, however, will
nullify the computer’s Energy Star compliance.
Standby precautions
■ Before entering Standby mode, be sure to save your data.
■ Do not remove/install memory or remove power components:
■ Do not remove/install the memory module. The computer or the
module could be damaged.
■ Do not remove the Battery Pack.
In any of the above cases, the standby configuration will not be saved.
■ If you carry the computer on board an aircraft or into a hospital, be
sure to shut down the computer in hibernation mode or in shutdown
mode to avoid radio signal interference.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-10
Getting Started
Benefits of standby
The standby feature provides the following benefits:
■ Restores the previous working environment more rapidly than does
hibernation.
■ Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System Standby feature.
■ You can use the panel power off feature.
Executing standby
You can also enable Standby by pressing Fn + F3. See Chapter 5,
Keyboard, for details.
You can enter standby mode in one of three ways:
1. Click start, click Turn Off Computer and click Stand by.
2. Close the display panel. This feature must be enabled. To enable it,
select the TOSHIBA Power Management Utility icon in the Control
Panel and select the Advanced tab and then set your Power Buttons
options to Standby.
3. Press the power button. This feature must be enabled. To enable it,
select the TOSHIBA Power Management Utility icon in the Control
Panel and select the Advanced tab.
When you turn the power back on, you can continue where you left when
you shut down the computer.
When the computer is shut down in standby mode, the power indicator
flashes amber.
If you are operating the computer on battery power, you can lengthen the
operating time by shutting down in hibernation mode. Standby mode
consumes more power.
Standby limitations
Standby will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-11
Getting Started
Restarting the computer
Certain conditions require that you reset the system. For example, if:
■ You change certain computer settings.
■ An error occurs and the computer does not respond to your keyboard
commands.
There are three ways to reset the computer system:
1. Select Restart from the Turn Off Computer window in the start box.
2. If the computer is already on, press Ctrl + Alt + Del.
3. Press the power button and hold it down for five seconds. Wait 10 to
15 seconds, then turn the power on again by pressing the power
button.
Restoring the preinstalled software from the Product
Recovery CD-ROM or DVD-ROM
If preinstalled files are damaged, use the Product Recovery CD-ROM or
DVD-ROM to restore them. To restore the operating system and all
preinstalled software, follow the steps below.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Product Recovery CD-ROM or DVD-ROMin the drive and
turn off the computer’s power.
2. Power on your computer, when In Touch with Tomorrow TOSHIBA
appears, press F12 key. Boot Menu will appear.
3. Use the up or down cursor key to select the CD-ROM/DVD drive in
the display menu.
4. Follow the on-screen instructions.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3-12
Satellite A30 Series
Chapter 4
Operating Basics
This chapter gives information on basic operations including using the
Touch pad, optical media drives, the internal modem, LAN, wireless LAN.
It also provides tips on caring for your computer and on heat dispersal.
Using the Touch pad
To use the Touch pad, simply move your finger tip across it in the
direction you want the on-screen pointer to go.
TOUCH PAD
TOUCH PAD CONTROL
BUTTONS
Touch pad and control buttons
Two buttons below the keyboard are used like the buttons on a mouse
pointer. Press the left button to select a menu item or to manipulate text
or graphics designated by the pointer. Press the right button to display a
menu or other function depending on the software you are using.
Do not press on the Touch pad too hard or press a sharp object such as a
ball point pen against the Touch pad. The Touch pad could be damaged.
User's Manual
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Basics
The Touch pad has similar functions to a two-button mouse with a scroll
wheel. For some functions, you can tap the Touch pad instead of
pressing a control button.
You can customize pointing device actions in Mouse Properties. Open
the Control Panel, select the Mouse icon and press Enter to open the
Mouse Properties window.
Click
Click the left control button or tap the Touch pad
one time.
Double-click
Drag and drop
Click the left control button twice or tap the
Touch pad twice.
1. Select the material you want to move.
2. Leave your finger on the Touch pad and
move the material.
3. Lift your finger to drop the material where
you want it.
Scroll
Vertical: Move your finger up or down the right
edge of the Touch pad.
Horizontal: Move your finger left or right along
the bottom edge of the Touch pad.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2
Operating Basics
Using optical media drives
The computer can be configured with one of the following optical media
drives: DVD-ROM, CD-RW/DVD, DVD-R/-RW or DVD-Multi drive. The text
and illustrations in this section refer primarily to the DVD-ROM drive.
However, operation is the same for the other drives. The full-size drive
provides high-performance execution of DVD-ROM or CD-ROM-based
programs. You can run either 12 cm (4.72") or 8 cm (3.15") discs without
an adaptor. An ATAPI interface controller is used for drive operation.
When the computer is accessing a disc, an LED on the drive glows. Refer
to Chapter 2, The Grand Tour, for specifications on each type of drive.
Safety Precautions
When operating your DVD device, please keep the following in mind:
1. Turn off the computer before mounting or removing the device in
order to avoid the risk of damaging it.
2. Insert the DC power plug in the correct direction in order to avoid the
risk of damaging the device.
3. Handle this device only in electrostatically safe environments and do
not touch connecting terminals with empty hands when mounting or
removing this device.
4. Do NOT do any of the following:
■ Do not use storage media (DVD or CD) that are not the correct size
or shape or do not meet the minimum formatting requirements.
■ Do not insert more than one (1) CD or DVD disc into the drive at
any time. Doing so will damage or destroy this equipment and
could damage or destroy the disc or cause data loss or corruption.
■ Do not load or eject any CD or DVD disc with force. Doing so will
damage or destroy this device and damage or destroy the disc or
cause data loss or destruction.
■ Do not give a strong shock while load or eject operation is in
process. Doing so will damage or destroy the device and could
damage or destroy the disc or cause data loss or corruption.
■ Do not eject a CD or DVD disc while the disc is in operation. Doing
so will damage or destroy this equipment and could damage or
destroy the disc or cause data loss or corruption.
■ Do not insert anything else into the drive other than a CD or DVD
disc. Doing so will damage or destroy this equipment.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-3
Operating Basics
Loading compact discs
To load a DVD/CD, follow the steps below and refer to the figures below.
1. Turn on the power.
2. a. Press the eject button to open the drawer slightly.
Pressing the eject button
b. Pressing the eject button will not open the drawer when the
computer’s power is off. If the power is off, you can open the drawer
by inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Manual release with the eject hole
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-4
Operating Basics
3. Grasp the drawer gently and pull until it is fully opened.
Pulling the drawer open
4. Lay the DVD/CD, label side up, in the drawer.
Inserting a DVD/CD
Be careful not to touch the lens or the area around it. Doing so could
cause the drive to malfunction.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5
Operating Basics
5. Press gently at the centre of the DVD/CD until you feel it click into
place. The DVD/CD should lie below the top of the spindle, flush with
its base.
6. Push the centre of the drawer to close it. Press gently until it locks in
place.
If the DVD/CD is not seated properly when the drawer is closed, it might
be damaged. Also, the drawer might not open fully when you press the
eject button.
Closing the DVD-ROM drawer
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-6
Operating Basics
Removing compact discs
To remove the DVD/CD, follow the steps below and refer to figure 4-8.
Do not press the eject button while the computer is accessing the DVD
drive. Wait for the Optical Media indicator to go out before you open the
drawer. Also, if the disc is spinning when you open it, wait for it to stop
before you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull
the drawer out until it is fully opened.
When the drawer pops open slightly, wait a moment to make sure the
DVD/CD has stopped spinning before pulling the drawer fully open.
Turn off the power before you use the eject hole. If the DVD/CD is
spinning when you open the drawer, it could fly off the spindle and cause
injury.
2. The DVD/CD extends slightly over the sides of the drawer so you can
grasp it. Hold the it gently and lift it out.
Removing a DVD/CD
3. Push the centre of the drawer to close it. Press gently until it locks into
place.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-7
Operating Basics
CD/Digital Mode button
This section describes how to use the CD/DVD/Audio Control Buttons to
control the optical media drive and Digital Audio Data.
Whether your computer is turned on or off, the CD/DVD/Audio control
buttons are locked by default. To unlock them, press the CD/Digital mode
button for more than 3 seconds. Press the CD/Digital mode button again
for over 3 seconds to lock them again. When the CD/Digital mode is
unlocked, press the CD/Digital mode briefly to switch between CD and
Digital mode. The system status indicator LEDs will show you which mode
you are in.
CD/DVD Mode and Play button Digital Mode and press Play
button
OS is running Windows Media Player starts and Windows Media Player starts and
CD audio play begins.
Digital Audio Data play begins.
The CD icon is displayed in the
Windows Task Bar.
The Digital Audio icon is
displayed on Windows desktop
screen.
To play Digital Audio Data, you must set the play list in the Windows
Media Player. The next time you play Digital Audio Data in succession, the
former play list will become active. If a CD was played the previous time,
then All Audio will be used.
Do not install or remove a memory module while the DVDROM drive
power is on. First turn off the power to the DVD-ROM drive.
CD/DVD/Audio control buttons
Besides the power button, the following four buttons control functions of
the optical media drive and Digital Audio Data:
1. Play/Pause
2. Stop
Starts or pauses play.
Stops play.
3. Next
Advances to the next track, chapter or data
Returns to the previous track, chapter or data
4. Previous
If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-8
Operating Basics
Writing DVD/CDs
The full-size drive provides high-performance execution of
DVD/CD-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") DVD/CDs without an adaptor. For information on loading and
unloading disks refer to the Using optical media drive section.
DVD/CD-R disks can be written to only once.
DVD-RAM/DVD-RW/CD-RW disks can be rewritten many times.
Before writing
Please observe the following points when you write or rewrite data.
■ We recommend the following manufacturers of CD-R, CD-RW,
DVD-R, DVDRW and DVD-RAM media. Media quality can affect write
success rates.
CD-R:
Taiyo Yuden Co. Ltd.
Mitsui Chemicals Inc.
Mitsubishi Chemical Corporation
Ricoh Co., Ltd
Hitachi Maxell Ltd.
CD-RW:
DVD-R:
Mitsubishi Chemical Corporation.
Ricoh Co., Ltd.
Matsushita Electric Corporation Co., Ltd.
Taiyo Yuden Co. Ltd.
DVD-RW
DVD-RAM
Victor Company of Japan, Ltd. (JVC).
TDK Corporation.
Matsushita Electric Corporation Co., Ltd.
■ Be sure to connect the AC adaptor when you write or rewrite.
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver, which can put a heavy
load on the CPU.
■ Operate the computer at full power. Do not use power-saving
features.
■ Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
■ Do not use hard disk utilities, including those intended to enhance
HDD access speed. They may cause unstable operation and damage
data.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-9
Operating Basics
■ Write from the computer’s HDD to the DVD/CD. Do not try to write
from shared devices such as a LAN server or any other network
device.
■ Writing with software other than Drag’n Drop CD has not been
confirmed. Therefore, operation with other software cannot be
guaranteed.
When writing or rewriting
Note when you write or rewrite a CD-R, CD-RW, DVD-R, DVD-RW, or
DVD-RAM:
■ Always copy data from the HDD to the DVD/CD. Do not use
cut-and-paste. The original data will be lost if there is a write error.
■ Before you use the Erase function, make sure the DVD/CD-RW disk
does not contain any data you want to keep. Erase destroys all data
on the disk.
■ Do not perform any of the following actions:
■ Operate the computer for any other function, including use of a
mouse or Touch pad, closing/opening the LCD panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the PC.
■ Install, remove or connect external devices, including the
following:
PC card, SD card, SmartMedia, USB devices, external display,
i.LINK devices, optical digital devices.
■ Use the Mode control button and Audio/Video control button to
reproduce music and voice.
■ Open the DVD drive.
■ If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-10
Operating Basics
Disk care
This section provides tips on protecting data stored on your DVD/CDs
and diskettes.
DVD/CD care
Handle your DVD/CDs with care. The following simple precautions will
increase the lifetime of your DVD/CDs and protect the data stored on
them:
1. Store your DVD/CDs in the container they came in to protect them
and keep them clean.
2. Do not bend the DVD/CD.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the
DVD/CD that contains data.
4. Hold the DVD/CD by its outside edge or the edge on the centre hole.
Fingerprints on the surface may prevent the drive from properly
reading data.
5. Do not expose to direct sunlight, extreme heat or cold. Do not place
heavy objects on your DVD/CDs.
6. If your DVD/CDs become dusty or dirty, wipe them with a clean dry
cloth. Wipe from the centre out, do not wipe in a circular direction
around the DVD/ CDs. If necessary, use a cloth dampened in water or
a neutral cleaner. Do not use benzene, thinner or similar cleaner.
Diskette care
Handle your diskettes with care. The following simple precautions will
increase the lifetime of your diskettes and protect the data you store on
them:
1. Store your diskettes in the container they came in to protect them and
keep them clean. If a diskette is dirty, do not use cleaning fluid. Clean
it with a soft damp cloth.
2. Do not slide back the diskette’s protective metal covering or touch the
diskette’s magnetic surface. Fingerprints may prevent the diskette
drive from reading data from the diskette.
3. Data may be lost if the diskette is twisted; bent; or exposed to direct
sunlight, extreme heat or cold.
4. Do not place heavy objects on your diskettes.
5. Do not eat, smoke, or use erasers near your diskettes. Foreign
particles inside the diskette’s jacket can damage the magnetic
surface.
6. Magnetic energy can destroy the data on your diskettes. Keep your
diskettes away from speakers, radios, television sets and other
sources of magnetic fields.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-11
Operating Basics
Using the internal modem
This section describes how to make settings and connect the modem.
Refer to the computer’s online help files for more information. Refer also
to the online help files for your modem software.
The internal modem does not support the voice functions described in the
help files. All data and fax functions are supported.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
IMPORTANT SAFETY INSTRUCTIONS
When using you telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
1. Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord indicated in this manual.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-12
Operating Basics
Region selection
Telecommunication regulations vary from one country/region to another,
so you will need to make sure the internal modem’s settings are correct
for the country/ region in which it will be used.
1. Point to All Programs, point to TOSHIBA Internal Modem and click
Region Select Utility.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
The Region Selection icon
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.
■ When you click a region it becomes the modem’s region selection,
and the New Location for telephony will be set automatically.
■ When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem’s current region
setting.
Properties menu
Click the icon with the secondary mouse button to display the following
menu.
The properties menu
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-13
Operating Basics
Setting
You can enable or disable the following settings:
AutoRun Mode
Region Select Utility starts automatically when you start up the operating
system.
Open the Dialling Properties dialog box after selecting
region.
The dialling properties dialog box will be displayed automatically after you
select the region.
Location list for region selection.
A submenu appears displaying location information for telephony.
Open dialog box, if the modem and Telephony Current
Location region code do not match.
A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialling Properties
Select this item to display the dialling properties.
If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select Japan
region mode. It is illegal to use the modem in Japan with any other
selection.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-14
Operating Basics
Connecting
To connect the internal modem cable, follow the steps below.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Connecting the internal modem
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a DVD-ROM drive or HDD connected
to a 16-bit PC card, modem speed might be slow or communication
might be interrupted.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-15
Operating Basics
LAN
The computer is equipped with LAN circuits that support Ethernet LAN
(10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100
megabits per second, 100BASE-Tx). This section describes how to
connect/disconnect to a LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
Connecting LAN cable
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second,
100BASE-TX), be sure to connect with a CAT5 cable. You cannot use a
CAT3 cable. If you are using Ethernet LAN (10 megabits per second,
10BASE-T), you can connect with either a CAT5 or a CAT3. To connect
the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you
hear the latch click into place.
Connecting the LAN cable
3. Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-16
Operating Basics
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer’s LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
Wireless communications
The computer’s wireless communication function supports both wireless
LAN devices.
Wireless LAN
The wireless LAN is compatible with other LAN systems based on Direct
Sequence Spread Spectrum radio technology that complies with IEEE
802.11 wireless LAN standard (802.11a, 802.11b, 802.11a+b, 802.11g,
802.11a+g). It supports the following features:
This is a Certification Mark of the Wireless Ethernet Compatibility Alliance,
Inc.
■ Automatic Transmit Rate Select mechanism in the transmit range of
54, 11, 5.5, 2 and 1 Mbit/s. (54Mbit/s is available only on 802.11a or
802.11g)
■ Frequency Channel Selection (2.4 GHz)
■ Roaming over multiple channels
■ Card Power Management
■ Wired Equivalent Privacy (WEP) data encryption. Wake-up on LAN
does not function on a wireless LAN.
Wireless communication switch
You can enable or disable wireless LAN function, with the on/off switch.
No transmissions are sent or received when the switch is off. Slide the
switch toward the left to turn it on and toward the right to turn it off.
Set the switch to off in airplanes and hospitals. Check the LED. It will stop
glowing when the wireless communication function is off.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-17
Operating Basics
Wireless communication LED
The LED indicates the status of the wireless communication functions.
LED status
LED off
Indication
Wireless communication switch is set to off.
Wireless communication switch is on.
LED glows
If you used the Task Bar to disable W-LAN, restart the computer or follow
the procedures below to enable the system to recognize W-LAN. Open or
click the following: start, Control Panel, System, Hardware Device
Manager, Network adapters, TOSHIBA Wireless LAN Mini PCI Card
and enable.
TV-Out
Use this jack to connect to a television. Be sure to use a 4 pin type
S-video cable.
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of
dust and use care with liquids around the computer.
■ Be careful not to spill liquids into the computer. If the computer does
get wet, turn the power off immediately and let the computer dry
completely before you turn it on again.
■ Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-18
Operating Basics
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure
trouble-free operation.
■ Make sure all disk activity has ended before moving the computer.
Check the Built-in HDD and Optical Media drive indicators on the
computer.
■ If a diskette is in the diskette drive, remove it.
■ If a disc is in the optical media drive, remove it. Also make sure the
optical media drive drawer is securely closed.
■ Turn off the power to the computer.
■ Disconnect all peripherals before moving the computer.
■ Close the display. Do not pick up the computer by its display panel or
back (where the interface ports are located).
■ Close all port covers.
■ Disconnect the AC adaptor if it is connected.
■ Use the carrying case when transporting the computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4-19
Satellite A30 Series
Chapter 5
The Keyboard
The computer’s keyboard layouts are compatible with a 101/102-key
enhanced keyboard. By pressing some keys in combination, all the
101/102-key keyboard functions can be executed on the computer.
The number of keys on your keyboard depends on which country/region’s
keyboard layout your computer is configured with. Keyboards for
numerous languages are available.
There are five types of keys: typewriter keys, keypad overlay, function
keys, soft keys and cursor control keys. The typewriter keys and keypad
overlay keys are grey. The other keys are dark grey.
Typewriter keys
The typewriter keys, produce the upper- and lower-case letters, numbers,
punctuation marks, and special symbols that appear on the screen. There
are some differences, however, between using a typewriter and using a
computer keyboard:
■ Letters and numbers produced in computer text vary in width.
Spaces, which are created by a space character may also vary
depending on line justification and other factors.
■ The lowercase l (el) and the number 1 (one) are not interchangeable on
computers as they are on a typewriter.
■ The uppercase O (oh) and the 0 (zero) are not interchangeable.
■ The Caps Lock function key locks only the alphabetic characters in
uppercase while the shift lock on a typewriter places all keys in the
shifted position.
■ The Shift keys, the Tab key, and the BkSp (backspace) key perform
the same function as their typewriter counterparts but also have
special computer functions.
User's Manual
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
The Keyboard
F1 ... F12 function keys
The function keys, not to be confused with Fn, are the 12 keys at the top
of your keyboard. These keys are dark grey, but function differently from
the other dark grey keys.
F1 through F12 are called function keys because they execute
programmed functions when pressed. Used in combination with the Fn
key, keys marked with icons execute specific functions on the computer.
See the section, Soft keys: Fn key combinations, in this chapter. The
function executed by individual keys depends on the software you are
using.
Soft Keys: Alt Gr Key Combinations
Alt Gr
The Alt Gr key, at the right of the space bar, is used in combination with
other keys to create accented or special characters (#,@,|, etc.). Note that
some of the keys at the top of the keyboard bear three symbols (not to be
confused with the blue or white letters on the side of some other keys). To
generate the third symbol, hold Alt Gr and press the key bearing the
character you wish to create. Please note that since the Alt Gr key is not
present on the American keyboard, it cannot be used if you have installed
an American keyboard driver.
Soft keys: Fn key combinations
The Fn (function) is unique to TOSHIBA computers and is used in
combination with other keys to form soft keys. Soft keys are key
combinations that enable, disable or configure specific features.
Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Standby feature.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2
The Keyboard
Emulation keys
PrtSc
Scroll
lock
Pause
Break
Esc
F1
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F2
SysReg
_
~
`
!
@
#
$
%
&
7
(
)
+
=
Num
*
^
PgUp
PgDn
*
.
Bk Sp
Ins
Home
End
/
2
6
8
-
1
3
4
5
9
0
Lock
7
8
9
{
[
}
]
Tab
Del
Q
W
E
R
T
Y
U
I
O
P
\
Home
PgUp
6
+
, ,
,
:
;
4
5
2
Enter
CapsLock
A
S
D
F
G
H
J
K
L
<
,
3
>
?
/
1
Shift
Z
X
C
V
B
N
M
Shift
.
PgDn
End
Enter
.
0
Ctrl
Alt
Alt
Ctrl
Del
Ins
A 101-key enhanced keyboard layout
The keyboard is designed to provide all the features of the 101-key
enhanced keyboard, shown above. The 101/102-key enhanced keyboard
has a numeric keypad and scroll lock key. It also has additional Enter and
Ctrl keys to the right of the main keyboard. Since the keyboard is smaller
and has fewer keys, some of the enhanced keyboard functions must be
simulated using two keys instead of one on the larger keyboard.
Your software may require you to use keys that the keyboard does not
have. Pressing the Fn key and one of the following keys simulates the
enhanced keyboard’s functions.
/
Press Fn + F10 or Fn + F11 to access the integrated keypad. When
activated, the grey keys with white numbers become numeric keypad
keys (Fn + F11) or cursor control keys (Fn + F10). Refer to the Keypad
overlay section in this chapter for more information on how to operate
these keys. The power on default for both settings is off.
Press Fn + F12 (ScrLock) to lock the cursor on a specific line. The power
on default is off.
Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric
keypad.
Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-3
The Keyboard
Hotkeys
Hotkeys (Fn + a function or cursor key) let you enable or disable certain
features of the computers.
Sound mute: Pressing Fn + Esc turns sound on or off. When you press
these hotkeys, the current setting will be displayed in a window.
Instant security: Press Fn + F1 to blank the screen to prevent others
from accessing your data. To restore the screen and original settings,
press any key or use the Touch pad. If you have set a screen saver
password, a dialog will appear. Enter the password and click OK. If no
screen saver password is set, the screen will be restored when you press
any key or use the Touch pad.
Power save mode: Pressing Fn + F2 changes the power save mode.
Press Fn + F2 once to display the Power Save Mode in a window. Press
the hotkeys again to change the setting. You can also change this setting
through the AC Power or Battery Power items of the Power Save Modes
tab in the TOSHIBA Power Management Utility.
Standby: When you press Fn + F3, the computer can enter Standby. To
avoid entering Standby unexpectedly, a dialog box appears for
verification. However, if you check the checkbox in the dialog box, it will
not appear from the next time.
Hibernation: When you press Fn + F4, the computer can enter
Hibernation. To avoid entering Hibernation unexpectedly, a dialog box
appears for verification. However, if you check the checkbox in the dialog
box, it will not appear from the next time.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-4
The Keyboard
Display selection: Press Fn + F5 to change the active display device.
When you press these hot keys a dialog box appears. Only selectable
devices will be displayed. Hold down Fn and press F5 again to change
the device. When you release Fn and F5, the selected device will change.
If you hold down the keys for three seconds the selection will return to
LCD.
Display brightness: Pressing Fn + F6 decreases the display brightness.
When you press these hotkeys, the current setting will be displayed for
two seconds by a pop-up icon. You can also change this setting through
the Monitor brightness item of the Power Save Mode window in Power
Saver.
Display brightness: Pressing Fn + F7 increases the display brightness.
When you press these hotkeys, the current setting will be displayed for
two seconds by a pop-up icon. You can also change this setting through
the Monitor brightness item of the Power Save Mode window in Power
Saver.
Wireless LAN: Pressing Fn + F8 turns the Wireless LAN off and on. In
order for this to properly work, the Wireless LAN Kill Switch in the
computer’s left side must be switched on as well.
Touch pad: Pressing Fn + F9 enables or disables the Touch pad
function. When you press these hotkeys, the current setting will change
and be displayed as an icon.
Resolution: Pressing Fn + Spacebar allows you to cycle through
available monitor resolutions.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-5
The Keyboard
Windows special keys
The keyboard provides two keys that have special functions in
Windows XP. One activates the Start menu and the other has the same
function as the secondary mouse button.
This key activates the Windows XP Start menu.
This key has the same function as the secondary mouse button.
Keypad overlay
Your computer’s keyboard does not have an independent numeric
keypad, but its numeric keypad overlay functions like one. The keys in the
centre of the keyboard with white letters make up the numeric keypad
overlay. The overlay provides the same functions as the numeric keypad
on the 101/102-key enhanced keyboard in figure 5-2.
Turning on the overlays
The numeric keypad overlay can be used for numeric data input or cursor
and page control.
Arrow mode
To turn on the Arrow mode, press Fn + F10 (Arrow mode indicator
lights). Now try cursor and page control using the keys shown in the
figure below. Press Fn + F10 again to turn off the overlay.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-6
The Keyboard
Numeric mode
To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator
lights). Now try numeric data entry using the keys in the figure below.
Press Fn + F11 again to turn off the overlay.
The numeric keypad overlay
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard
without turning off the overlay:
1. Hold down Fn and press any other key. All keys will operate as if the
overlay were off.
2. Type upper-case characters by holding down Fn + Shift and pressing
a character key.
3. Release Fn to continue using the overlay.
Temporarily using overlay (overlay off)
While using the normal keyboard, you can temporarily use the keypad
overlay without turning it on:
1. Press and hold down Fn.
2. Check the keyboard indicators. Pressing Fn turns on the most
recently used overlay. If the Numeric mode indicator lights, you can
use the overlay for numeric entry. If the Arrow mode indicator lights,
you can use it for cursor and page control.
3. Release Fn to return to normal keyboard operation.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-7
The Keyboard
Temporarily changing modes
If the computer is in Numeric mode, you can switch temporarily to Arrow
mode by pressing a shift key.
If the computer is in Arrow mode, you can switch temporarily to Numeric
mode by pressing a shift key.
Generating ASCII characters
Not all ASCII characters can be generated using normal keyboard
operation. But, you can generate these characters using their ASCII
codes.
With the overlay on:
1. Hold down Alt.
2. Using the overlay keys, type the ASCII code.
3. Release Alt, and the ASCII character appears on the display screen.
With the overlay off:
1. Hold Alt + Fn.
2. Using the overlay keys, type the ASCII code.
3. Release Alt + Fn, and the ASCII character appears on the display
screen.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5-8
Satellite A30 Series
Chapter 6
Power and Power-Up Modes
The computer’s power resources include the AC adaptor and internal
batteries. This chapter gives details on making the most effective use of
these resources including charging and changing batteries, tips for saving
battery power, and power up modes.
Power conditions
The computer’s operating capability and battery charge status are
affected by the power conditions: whether an AC adaptor is connected,
whether a battery is installed and what the charge level is for the battery.
Power on
Power off (no operation)
■
■
■
Operates
■
LED: Battery green
DC IN green
AC adaptor
connected
Battery fully
charged
No charge
LED: Battery green
DC IN green
■
■
■
Operates
■
■
Quick charge
Battery partially
charged or no
charge
Quick charge
LED: Battery amber
DC IN green
LED: Battery amber
DC IN green
■
■
■
Operates
■
■
No charge
No battery
installed
No charge
LED: Battery off
DC IN green
LED: Battery off
DC IN green
User's Manual
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
Power on
Power off (no operation)
■
■
Operates
AC adaptor
not
connected
Battery charge is
above low battery
trigger point
—
LED: Battery off
DC IN off
■
■
Operates
Battery charge is
below low battery
trigger point
Alarm sounds (depending
on the Toshiba Power
Management Utility
setting)
—
■
LED: Battery flashes
amber
DC IN off
Battery charge
exhausted
Computer goes into resume
mode and shuts down
—
—
■
■
Cannot operate
No Battery
installed
LED: Battery off
DC IN off
Power indicators
As shown in the above table, the Battery, DC IN and Power indicators on
the system indicator alert you to the computer’s operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status:
Flashing amber
Amber
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates the AC adaptor is connected and
charging the battery.
Green
Indicates the AC adaptor is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does
not light.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-2
Power and Power-Up Modes
DC IN indicator
Check the DC IN indicator to determine the power status with the AC
adaptor connected:
Green
Indicates the AC adaptor is connected and
supplying proper power to the computer.
No light
Indicates the AC adaptor is not connected.
Power indicator
Check the Power indicator to determine the power status with the
AC adaptor connected:
Green
Indicates power is being supplied to the
computer and the computer is turned on.
Blinking amber
Indicates power is being supplied to the
computer while the computer is in Standby
mode. The indicator blinks on for one second
and off for two seconds.
No light
Under any other conditions, the indicator does
not light.
Battery types
The computer has two types of batteries:
■ Battery pack
■ Real Time Clock (RTC) battery
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-3
Power and Power-Up Modes
Battery pack
When the AC adaptor is not connected, the computer’s main power
source is a removable lithium ion battery pack, also referred to in this
manual as the battery.
You can purchase additional battery packs for extended use of the
computer away from an AC power source.
The battery is a disposable item. When its operation becomes short even
when fully charged, replace it with a new one.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Do not remove the Battery Pack while the computer is in Standby mode.
Data is stored in RAM, so if the computer loses power, it will be lost.
Battery type " PA3250U-1BAS" or " PA3250U-1BRS " is for use with
TOSHIBA Notebook PC, model "Satellite A30".
Real Time Clock battery
The Real Time Clock (RTC) battery provides power for the internal real
time clock and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this
data and the real time clock and calendar stop working. The following
message appears when you turn on the power:
S
ERROR: 0271=Check date and time settings.
WARNING: 0251=System CMOS checksum bad - Default
configuration used.
Press <F1> to resume, <F2> to Setup
The computer’s RTC battery is a lithium ion battery and should be
replaced only by your dealer or by a TOSHIBA service representative. The
battery can explode if not properly replaced, used, handled or disposed
of. Dispose of the battery as required by local ordinances or regulations.
When this error appears, the following action is recommended.
1. Plug in AC over 24 hours
2. Press F2 to enter BIOS setup menu
3. Set correct time and date
If you still see error message after above action, please get contact with
TOSHIBA service.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-4
Power and Power-Up Modes
Care and use of the battery pack
The battery pack is a vital component of portable computing. Taking
proper care of it will help ensure longer operating time on battery power
as well as a longer life for your battery pack. Follow the instructions in this
section carefully to ensure safe operation and maximum performance.
Safety precautions
Mishandling of batteries can cause death, serious injury or property
damage.
Carefully observe the following advisories:
Danger: Indicates an imminently hazardous situation, which could result
in death or serious injury, if you do not follow instructions.
Warning: Indicates a potentially hazardous situation, which could result in
death or serious injury, if you do not follow instructions.
Caution: Indicates a potentially hazardous situation, which if not avoided,
may result in moderate or minor injury or property damage.
Note: Provides important information.
Risk of explosion if battery is replaced by an incorrect type dispose of
used batteries according to the instruction.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-5
Power and Power-Up Modes
Danger
1. Never try to dispose of the battery pack by burning or expose it to a
heating device such as a microwave oven. The battery pack could
explode and cause bodily injury.
2. Never try to disassemble, repair or otherwise tamper with a battery
pack. The battery pack will overheat and ignite. Leakage of caustic
alkaline solution or other electrolytic substances will cause fire or
injury, possibly resulting in death or serious injury.
3. Never short-circuit the battery pack by contacting the terminals with a
metal object. A short-circuit can cause fire or otherwise damage the
battery pack and possibly cause injury. To avoid accidental
short-circuit, always wrap the battery pack in plastic and cover the
terminals with electrical tape when storing or disposing of the battery
pack.
4. Never puncture the battery pack with a nail or other sharp object.
Never strike it with a hammer or other object. Never step on it.
5. Never try to charge the battery pack in any manner other than that
described in the user’s manual. Never connect the battery pack to a
plug socket or to an automobile’s cigarette lighter socket. It may
rupture or ignite.
6. Use only the battery pack supplied with the computer or other device
or an battery pack approved by the computer or device’s
manufacturer. Battery packs have different voltages and terminal
polarities. Use of an improper battery could cause smoke, fire or
rupture of the battery pack.
7. Never subject a battery pack to heat, such as storage near a heat
source. Exposure to heat can cause the battery pack to ignite,
explode or leak caustic liquid and cause death or serious injury. It
could also fail or malfunction causing data loss.
8. Never expose the battery pack to abnormal shock, vibration or
pressure. The battery pack’s internal protective device will fail,
causing it to overheat, explode, ignite or leak caustic liquids possibly
resulting in death or serious injury.
9. Never let a battery pack become wet. A wet battery pack will
overheat, ignite or rupture possibly resulting in death or serious injury.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-6
Power and Power-Up Modes
Warning
1. Never allow caustic electrolyte fluid leaked from a battery pack to
contact your eyes, skin or clothing. If caustic electrolyte fluid should
contact your eyes, immediately wash your eyes with large amounts of
running water and seek medical attention, to help prevent eye
damage. It electrolyte fluid should contact your skin, immediately
wash it under running water to prevent rash. If it contacts your
clothes, promptly remove them to prevent the fluid from contacting
your skin or eyes.
2. Immediately turn off the power, disconnect the AC adaptor and
remove the battery if any of the following events are observed in the
battery pack: offensive or unusual odour, excessive heat,
discoloration or deformation. Never use the computer again until it has
been checked by a TOSHIBA service provider. It might generate
smoke or fire, or the battery pack might rupture.
3. Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation could
generate smoke or fire, or cause the battery pack to rupture.
4. Keep the battery pack out or reach of infants and children. It can
cause injury.
Caution
1. Never continue to use a battery pack after its recharging capacity has
become impaired, or after the display of a warning message indicating
that the battery pack’s power is exhausted. Continued use of an
exhausted or impaired battery pack could cause the loss of data.
2. Never dispose of battery packs with normal trash. Bring them to your
TOSHIBA dealer or to another recycling centre to save resources and
prevent environ- mental damage. Cover the terminals with electrical
tape to prevent short-circuits, which could cause the battery pack to
ignite or rupture.
3. Use only battery packs recommended by TOSHIBA as replacements.
4. Always make sure the battery pack is installed correctly and securely.
Otherwise, a battery pack could fall out and possibly cause injury.
5. Charge the battery pack only in normal ambient temperature between
5 and 30 degrees Celsius. Otherwise, the electrolyte solution might
leak, battery pack performance might deteriorate and the battery life
might be shortened.
6. Be sure to monitor the remaining battery power. If the battery pack
and real time clock battery discharge completely, Standby and
Suspend will not function and data in memory will be lost. Also, the
computer might register an incorrect time and date. In this case,
connect the AC adaptor to recharge the batteries.
7. Never install or remove the battery pack without first turning off the
power and disconnecting the AC adaptor. Never remove the battery
pack while the computer is in Suspend or Standby mode. Data will be
lost.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-7
Power and Power-Up Modes
Note
1. Never remove the battery pack while the Wake-up on LAN function is
enabled. Data will be lost. Before you remove a battery pack, disable
the Wake-up on LAN function.
2. To ensure the battery pack maintains maximum capacity, operate the
computer on battery power once a week until the battery pack is fully
discharged. Refer to the section Extending battery life in this chapter
for procedures. If the computer is continuously operated on AC power
for an extended period, more than a week, the battery might fail to
retain a charge. It might not function efficiently over the expected life
of the battery pack and the Battery indicator might not indicate a
low-battery condition.
3. After the battery pack is charged, avoid leaving the AC adaptor
connected and the computer turned off for more than a few hours at a
time. Continuing to charge a fully charged battery pack can damage
the battery.
Charging the batteries
When the power in the battery pack becomes low, the Battery indicator
flashes amber indicating that only a few minutes of battery power remain.
If you continue to use the computer while the Battery indicator flashes,
the computer enables Hibernation mode (so you don’t lose data) and
automatically turns off.
You must recharge a battery pack when it becomes discharged.
Procedures
To recharge a battery pack while it is installed in the computer, connect
the AC adaptor to the DC IN socket and plug the other end into a working
outlet.
The Battery indicator glows amber when the battery is being charged.
Use only the computer connected to an AC power source to charge the
battery pack. Do not attempt to charge the battery pack with any other
charger.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-8
Power and Power-Up Modes
Time
The following table shows the time required to fully charge a discharged
battery.
Charging time
(hours)
Battery type
Battery pack
RTC battery
Power on
Power off
About 12 or longer
about 24
about 4
about 24 with AC or
Battery pack
The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the
computer. If you make heavy use of external devices, for example, the
battery might scarcely charge at all during operation. Refer also to the
section Maximizing battery operating time. The same factors affect charge
time.
Battery charging notice
The battery may not charge right away under the following conditions:
■ The battery is extremely hot or cold. To make sure the battery charges
to its full capacity, charge the battery at room temperature of 10° to
30°C (50° to 88°F).
■ The battery is nearly completely discharged. Leave the AC adaptor
connected for a few minutes and the battery should begin charging.
Once a battery pack is fully charged, it is recommended that you operate
the computer only on battery power until the battery pack completely
discharges. Doing so extends battery life and helps ensure accurate
monitoring of battery capacity.
The Battery indicator may show a rapid decrease in battery operating
time when you try to charge a battery under the following conditions:
■ The battery has not been used for a long time.
■ The battery has completely discharged and been left in the computer
for a long time.
■ A cool battery is installed in a warm computer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-9
Power and Power-Up Modes
In such case, follow the steps below.
1. Fully discharge the battery by leaving it in the computer with the
power on until the power automatically shuts off.
2. Plug in the AC adaptor.
3. Charge the battery until the Battery indicator glows green.
Repeat these steps two or three times until the battery recovers normal
capacity.
Leaving the AC adaptor connected will shorten battery life. At least once
a month, run the computer on battery power until the battery is fully
discharged, then recharge the battery.
Monitoring battery capacity
Remaining battery power can be monitored by the TOSHIBA Power
Management Utility. Refer to Utilities in Chapter 1, Introduction.
Wait for a moment after turning on the computer before trying to monitor
the remaining operating time. The computer needs this time to check the
battery’s remaining capacity.
With repeated discharges and recharges, the battery’s capacity will
gradually decrease. Therefore, an often used, older battery will not
operate for as long as a new battery even when both are fully charged.
Maximizing battery operating time
A battery’s usefulness depends on how long it can supply power on a
single charge.
How long the charge lasts in a battery depends on:
■ How you configure the computer (for example, whether you enable
battery power saving options). The computer provides a battery save
mode to conserve battery power. This mode has the following
options:
■ Display auto off
■ HDD auto off
■ System auto off
■ LCD brightness
■ How often and how long you use the hard disk, CD-ROM and the
diskette drive.
■ How much charge the battery contained to begin with.
■ How you use optional devices, such as a PC Card, to which the
battery supplies power.
■ Enabling Resume mode conserves battery power if you are frequently
turning the computer off and on.
■ Where you store your programs and data.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-10
Power and Power-Up Modes
■ Closing the display when you are not using the keyboard saves
power.
■ Operating time decreases at low temperatures.
■ The condition of the battery terminals. Make sure the battery terminals
stay clean by wiping them with a clean dry cloth before installing the
battery pack.
Retaining data with power off (standby mode)
When you turn off your computer with fully charged batteries, the
batteries retain data for the following approximate time periods:
Battery
4 days minimum (Standby mode)
1 month minimum (Shut down mode)
RTC battery
1 month minimum
Extending battery life
To maximize the life of your battery pack:
■ If you have extra battery packs, rotate their use.
■ If you will not be using the system for an extended period, remove the
battery pack.
■ Store spare battery packs in a cool dry place out of direct sunlight.
Replacing the battery pack
When the battery pack reaches the end of its operating life you will need
to install a new one. If the Battery indicator flashes amber shortly after
the battery has been fully recharged, the battery pack needs to be
replaced.
You might also replace a discharged battery pack with a charged spare
when you are operating your computer away from an AC power source.
This section explains how to remove and install the battery pack.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-11
Power and Power-Up Modes
Removing the battery pack
To replace a discharged battery pack, follow the steps below.
When handling battery packs, be careful not to short circuit the terminals.
Also do not drop, hit or otherwise apply impact; do not scratch or break
the casing and do not twist or bend the battery pack.
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Turn the computer upside down.
5. Slide the battery latch to the right, then pull the battery out of the
battery bay.
2
1
Removing the battery pack
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-12
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the
connectors on the battery face the connectors on the computer.
4. Gently press the battery into the battery bay until the latch clicks into
place.
Installing the battery pack
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-13
Power and Power-Up Modes
Power-up modes
The computer has three power-up modes:
■ Hibernation (saves data in memory to the hard disk)
■ Standby (Power remains on, saving data in RAM, but the CPU and all
other devices enter sleep mode.)
■ Boot (does not save data in memory)
Refer also to the section Turning off the power in Chapter 3, Getting
Started.
Panel power off/on
You can set up your computer so that power turns off automatically when
you close the display panel.
When you open the panel, power turns on in Standby or Hibernation
mode but not in boot mode.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.
System automatic Standby/ Hibernation
This feature automatically turns off the system in Standby or Hibernation
mode if the computer is not used for a set duration.
Refer to Special Features, in Chapter 1, Introduction for an explanation of
how to set the duration.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6-14
Satellite A30 Series
Chapter 7
Optional Devices
Optional devices can expand the computer’s capabilities and its
versatility. This chapter describes connection or installation of the
following types of devices:
Cards/memory
■ PC cards
■ Memory modules
Power devices
■ Additional battery pack
■ Additional AC adaptor
Peripheral devices
■ Parallel printer
■ External monitor
■ Television
■ i.LINK (IEEE1394)
■ Security lock
PC cards
The computer is equipped with a PC card expansion slot that can
accommodate one 5 mm Type II card. Any PC card that meets industry
standards (manufactured by TOSHIBA or other vendor) can be installed.
The slots support 16-bit PC cards, including PC card 16’s multifunction
card and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
If you use a storage device such as a CD-ROM or HDD connected to a
16-bit PC card, modem speed might be slow or communication
interrupted.
User's Manual
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Installing a PC card
Two PC card connector is located on the right side of the computer. The
computer’s hot-install feature lets you install a PC card while the
computer’s power is on.
Do not install a PC card while the computer is in Standby or Hibernation
mode. Some cards might not work properly.
To install a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Installing a PC card
After installing the card, refer to the card’s documentation and check the
configuration in Windows to make sure it is appropriate for your card.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-2
Optional Devices
Removing a PC card
1. Click the Safety Remove Hardware icon on the Task Bar.
2. Click the PC card you want to remove.
3. Press the eject button of the PC card to extend the button.
4. Press the extended eject button to pop the card out slightly.
5. Grasp the PC card and remove it.
Removing a PC card
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-3
Optional Devices
Memory expansion
You can install additional memory in the computer’s memory module
sockets to increase the amount of RAM. This section describes how to
install and remove a memory module.
Before you install or remove a memory module, turn off the computer with
the Shut Down option in the Windows Start menu. If you install or remove
a memory module while the computer is in Standby or Hibernation mode,
data will be lost.
Some memory modules can be physically installed but are not compatible
with the computer. In this case the computer will issue a warning.
Satellite A30 series: There will be a long beep, 3 short beeps, 3 more
short beeps and then a long beep when you turn the power on. In this
case, shut down the power and remove the incompatible memory
module.
If you want to upgrade system memory, you should only use certified
modules. Ask your vendor or check the TOSHIBA web site for a list of
approved memory products.
Installing memory module
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature
before you replace them.
Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.
Do not try to install a memory module under the following conditions. You
can damage the computer and the module:
The computer is turned on.
The computer was shut down using the Stand by mode.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery (refer to
Chapter 6, Power and Power-Up Modes).
4. Remove the screws securing the memory module socket cover.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-4
Optional Devices
5. Slide your fingernail or a thin object under the cover and lift it off.
Removing the memory module socket cover
6. Fit the module’s connectors into the computer’s connectors at about
a 45 degree angle and press the module carefully to ensure a firm
connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Push the module down so it lies flat. Latches on either side will click
into place to secure the module.
Installing a module
8. Seat the cover and secure it with one screw.
9. Replace the battery pack as described in Chapter 6, Power and
Power-Up Modes.
10. Turn the power on and make sure the added memory is recognized.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-5
Optional Devices
Removing memory module
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature
before you replace them.
To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the
computer.
Do not try to remove a memory module with the computer turned on. You
can damage the computer and the module.
2. Turn the computer upside down and remove the battery and one
screw securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will
force one end of the module up.
5. Grasp the module and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
Removing the memory module
6. Seat the cover and secure it with one screw.
7. Replace the battery.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-6
Optional Devices
Additional battery pack
You can increase the portability of the computer with additional battery
packs. If you’re away from an AC power source and your battery runs
low, you can replace it with a freshly charged battery. See Chapter 6,
Power and Power-Up Modes.
Additional AC adaptor
If you frequently carry the computer to different sites such as your home
and office, having an AC adaptor at each location reduces the weight and
bulk of your load. If you purchase an additional AC adaptor, please only
use the one recommended by your TOSHIBA dealer and which
corresponds to your computer.
Parallel printer
You can connect any standard Centronics-compatible parallel printer to
your computer. All you need is an IBM PC™ parallel printer cable. Your
dealer can supply one or you can purchase one at most computer stores.
The cable’s connectors are designed so that it is impossible for you to
connect them incorrectly. To connect a printer, follow these steps:
1. Turn off the computer.
2. Insert one end of the cable into the computer’s parallel port.
3. Tighten the screws that fasten the cable connector to the computer’s
parallel port.
4. Insert the other end of the cable into the printer’s parallel connector.
5. Fasten the connector to the printer with the clips on the parallel port.
6. Turn on the printer.
7. Turn on the computer.
8. Windows XP may automatically recognize the printer and you can
begin printing immediately. If it doesn’t, install the printer with the Add
Printer Wizard. To access the Add Printer Wizard, click Start, point
to Settings, click Printers and double click the Add Printer icon.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-7
Optional Devices
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes.
To connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is colour or monochrome.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 5, The Keyboard, for
details on using hot keys to change the display setting.
Television
A television can be connected to the video out port on the computer.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied on all models) to connect the
television to the video out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 5, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-8
Optional Devices
To set the TV type, follow the steps below:
1. Click Start and then select Control Panel.
2. Choose Appearance and Themes.
3. Click Display to open the Display Properties dialog box.
4. Click the Settings tab and click the Advanced button.
5. In the Advanced dialog box, go to the Monitor tab and select the
Hide modes that this monitor cannot display option.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-9
Optional Devices
6. Next, click the Intel® Extreme Graphics tab, and then click Graphics
Properties.
7. Select the appropriate device from the icon panel on the left. Set that
device’s resolution. When that device is the primary display device,
the selected resolution will be used automatically.
8. Click OK.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-10
Optional Devices
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as:
■ Digital video cameras
■ Hard disk drives
■ MO drives
■ Optical media drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
Precautions
■ Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer.
■ Do not transfer data in areas where static electricity is easily
generated or in areas subjected to electronic noise. Data can be
destroyed.
■ If you are transferring data through an IEEE1394 hub, do not connect
or disconnect other devices from the hub during data transfer. There
is a likelihood that data will be damaged. Connect all devices to the
hub before you turn on the computer’s power.
Connecting
1. Make sure the connectors are properly aligned and plug the i.LINK
(IEEE1394) cable into the computer.
2. Plug the other end of the cable into the device.
Note the following when you use i.LINK:
■ You may need to install drivers for your i.LINK devices.
■ Not all i.LINK devices have been tested. Therefore, compatibility with
all i.LINK devices cannot be guaranteed.
■ Use S100, S200 or S400 cables no longer than three meters.
■ Some devices might not support standby or automatic off functions.
■ Do not connect or disconnect an i.LINK device while it is using an
application or when the computer is automatically shutting it down to
save power. Data might be destroyed.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-11
Optional Devices
Disconnecting
1. Click the Eject or Remove Hardware icon on the Task Bar.
2. Point to i.LINK (IEEE1394) device and click.
3. Disconnect the cable from the computer then from the i.LINK device.
Refer also to the documentation that came with your i.LINK device.
Security lock
A security lock enables you to anchor your computer to a desk or other
heavy object to help prevent unauthorized removal of the computer.
Attach one end of a cable to the desk and the other end to the security
lock slot on the right side of the computer.
Security lock
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7-12
Satellite A30 Series
Chapter 8
Troubleshooting
TOSHIBA designed the computer for durability. However, should
problems occur, following the procedures in this chapter can help to
determine the cause.
All readers should become familiar with this chapter. Knowing what might
go wrong can help prevent problems from occurring.
Problem solving process
Resolving problems will be much easier if you observe the following
guidelines:
■ Stop immediately when you recognize a problem exists. Further action
may result in data loss or damage. You may destroy valuable
problem-related information that can help solve the problem.
■ Observe what is happening. Write down what the system is doing and
what actions you performed immediately before the problem
occurred. If you have a printer attached, print a copy of the screen
using PrtSc.
■ Isolate the problem. Using the tools available to you, such as the
troubleshooting tips in this chapter, try to discover the specific actions
that caused the problem.
The questions and procedures offered in this chapter are meant as a
guide, they are not definitive problem solving techniques. Many problems
can be solved simply, but a few may require help from your dealer. If you
find you need to consult your dealer or others, be prepared to describe
the problem in as much detail as possible.
User's Manual
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Preliminary checklist
Consider the simplest solution first. The items in this checklist are easy to
fix and yet can cause what appears to be a serious problem.
■ Make sure you turn on all peripheral devices before you turn on the
computer. This includes your printer and any other external device
you are using.
■ Before you attach an external device, turn the computer off. When you
turn the computer back on it recognizes the new device.
■ Make sure all options are set properly in the setup program.
■ Check all cables. Are they correctly and firmly attached? Loose cables
can cause signal errors.
■ Inspect all connecting cables for loose wires and all connectors for
loose pins.
■ Check that your diskette, CD-ROM or DVD-ROM is correctly inserted
and that the diskette’s write protect tab is correctly set.
Make notes of your observations and keep them in a permanent error log.
This will help you describe your problems to your dealer. If a problem
recurs, the log will help you identify the problem faster.
Analysing the problem
Sometimes the system gives clues that can help you identify why it is
malfunctioning. Keep the following questions in mind:
■ Which part of the system is not operating properly: keyboard, diskette
drives, hard disk drive, printer, display. Each device produces
different symptoms.
■ Is the operating system configuration set properly? Check the
configuration options.
■ What appears on the display screen? Does it display any messages or
random characters? Print a copy of the screen if you have a printer
attached. Look up the messages in the software and operating system
documentation. Check that all connecting cables are correctly and
firmly attached. Loose cables can cause erroneous or intermittent
signals.
■ Do any indicators light? Which ones? What colour are they? Do they
stay on or blink? Write down what you see.
■ Do you hear any beeps? How many? Are they long or short? Are they
high pitched or low? Is the computer making any unusual noises?
Write down what you hear.
Record your observations so you can describe them to your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2
Troubleshooting
Software
The problems may be caused by your software or diskette. If you cannot
load a software package, the media may be damaged or the program
might be corrupted. Try loading another copy of the software.
If an error message appears while you are using a software package,
check the software documentation. These documents usually include a
problem solving section or a summary of error messages.
Next, check any error messages in the OS documentation.
Hardware
If you cannot find a software problem, check your hard- ware. First run
through the items in the preliminary checklist above. If you still cannot
correct the problem, try to identify the source. The next section provides
checklists for individual components and peripherals.
Hardware and system checklist
This section discusses problems caused by your computer’s hardware or
attached peripherals. Basic problems may occur in the following areas:
■ System start-up
■ Self test
■ PC Card
■ Printer
■ Power
■ Monitor
■ Overheating power down
■ AC Power
■ Sound system
■ Pointing device
■ USB
■ Battery
■ Password
■ TV output signal
■ Standby/Hibernation
■ Memory expansion
■ Modem
■ Keyboard
■ LCD panel
■ Hard disk drive
■ DVD-RAM drive
■ DVD Multi drive
■ CD-RW/DVD-ROM drive
■ DVD-R/-RW drive
■ DVD-ROM drive
■ i.LINK (IEEE1394)
■ Wireless LAN
■ LAN
■ Infrared port
System start-up
When the computer does not start properly, check the following items:
■ Self Test
■ Power Sources
■ Power-on Password
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-3
Troubleshooting
Self test
When the computer starts up, the self test will be run automatically, and
the following will be displayed:
S
In Touch with Tomorrow
TOSHIBA
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating
system. Depending on how the Boot Priority is set in the computer’s
BIOS. If any of the following conditions are present, the self test failed:
■ The computer stops and does not proceed to display information or
messages except the TOSHIBA logo.
■ Random characters appear on the screen, and the system does not
function normally.
■ The screen displays an error message.
Turn off the computer and check all cable connections as well as
PC Card and memory module connections. If the test fails again, contact
your dealer.
Power
When the computer is not plugged into an AC outlet, the battery pack is
the primary power source. However, your computer has a number of
other power resources, including intelligent power supply, Real Time
Clock battery. These resources are interrelated and any one could affect
apparent power problems. This section provides check lists for AC power
and the battery. If you cannot resolve a problem after following them, the
cause could lie with another power resource. In such case, contact your
dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-4
Troubleshooting
Overheating power down
If the computer’s internal temperature becomes too high, the computer
will automatically shut down.
AC power
If you have trouble turning on the computer with the AC adaptor
connected, check the DC IN indicator. Refer to Chapter 6, Power and
Power-Up Modes, for more information.
Problem
Procedure
AC adaptor doesn’t Check the connections. Make sure the cord is
power the computer firmly connected to the computer and a power
(DC IN indicator does outlet.
not glow green)
Check the condition of the cord and terminals. If
the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-5
Troubleshooting
Battery
If you suspect a problem with the battery, check the DC IN indicator as
well as the indicators for the battery. For information on indicators and
battery operation see Chapter 6, Power and Power-Up Modes.
Problem
Procedure
Battery doesn’t power The battery may be discharged. Connect the AC
the computer
power cord to charge the battery.
Battery doesn’t
charge when the AC
power cord is
attached (Battery
indicator does not
glow amber)
If the battery is completely discharged, it will not
begin charging at once. Wait a few minutes.
If the battery still does not charge, make sure the
outlet is supplying power. Plug in an appliance
and see if it works. If it doesn’t, try another
power source.
Check whether the battery is hot or cold. If the
battery is too hot or too cold, it will not charge
properly. Let it reach room temperature.
Unplug the AC adaptor and remove the battery
to make sure the terminals are clean. If
necessary wipe them with a soft dry cloth
dipped in alcohol.
Connect the AC adaptor and replace the battery.
Check the Battery indicator. If it does not glow,
let the computer charge the battery for at least
20 minutes. If the Battery indicator glows after
20 minutes, let the battery continue to charge for
at least another 20 minutes before turning on the
computer.
If the indicator still does not glow, the battery
may be at the end of its operating life. Replace it.
If you do not think the battery is at the end of its
operating life, see your dealer.
Battery doesn’t power Check the power consumption settings in the
the computer as long
as expected
TOSHIBA Power Management Utility. Consider
using a power saving mode.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-6
Troubleshooting
Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5, The Keyboard.
Problem
Procedure
Some letter keys
produce numbers
Check that the numeric keypad overlay is not
selected. Press Fn + F10 and try typing again.
Output to screen is
garbled
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software’s documentation.
If you are still unable to use the keyboard,
consult your dealer.
LCD panel
Problem
Procedure
Lines appear broken
Check if you are in DOS mode. In DOS, lines
may appear broken, because of the LCD
screen’s higher resolution. The Windows display
should appear normal.
No display
Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Make sure instant security was not activated. Try
entering your password, if you have one
registered. Or, turn the power off and back on to
clear instant security .
Problems above
remain unresolved or
other problems occur
Refer to your software’s documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-7
Troubleshooting
Hard disk drive
Problem
Procedure
Computer does not
boot from hard drive
Insert a system diskette and reboot.
There may be a problem with your operating
system files. Refer to your OS documentation.
Slow performance
Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your OS documentation
or online HELP for information on running
SCANDISK and the defragmenter.
Contact your dealer if the problems continue.
Optical media device
For more information, refer to Chapter 2, The Grand Tour, and to
Chapter 4, Operating Basics.
Problem
Procedure
You cannot access a
disc in the drive
Make sure the drive’s drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If necessary,
wipe it with a clean cloth dipped in water or a
neutral cleaner. See the Disk care section in
Chapter 4, Operating Basics, for details on
cleaning.
Check your config.sys and autoexec.bat files to
make sure they have the necessary drivers and
execution lines.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-8
Troubleshooting
Problem
Procedure
Some CDs run
correctly, but others
do not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration match’s your software’s needs.
Check the disc’s documentation.
Check the type of disc you are using. The drive
supports:
CD-DA, CD-ROM, CD-R/W, CD-R, CD-ROM XA
(except ADPCM), CD-I Ready, PhotoCD,
CD-Extra (CD+), CD-text, DVD-Video,
DVD-ROM, DVD-R, DVD-RW, DVD-RAM
Check the region code on the DVD. It must
match that on the DVD-ROM drive. Region
codes are listed in the Drives section in
Chapter 2, The Grand Tour.
Contact your dealer if the problems continue.
Multidrive & DVD-R/RW
For more information, refer to Chapter 2, The Grand Tour, and to
Chapter 4, Operating Basics.
Problem
Procedure
You cannot access a
disc in the drive
Make sure the drive’s drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If necessary,
wipe it with a clean cloth dipped in water or a
neutral cleaner. See the Disk care section in
Chapter 4, Operating Basics, for details on
cleaning.
Check your config.sys and autoexec.bat files to
make sure they have the necessary drivers and
execution lines.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-9
Troubleshooting
Problem
Procedure
Some CDs run
correctly, but others
do not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration match’s your software’s needs.
Check the disc’s documentation.
Check the type of disc you are using. The drive
supports:
CD-DA, CD-ROM, CD-R/W, CD-R, CD-ROM XA
(except ADPCM), CD-I Ready, PhotoCD,
CD-Extra (CD+), CD-text, DVD-Video,
DVD-ROM, DVD-R, DVD-RW, DVD-RAM
Check the region code on the DVD. It must
match that on the DVD drive. Region codes are
listed in the Drives section in Chapter 2, The
Grand Tour.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by TOSHIBA.
Do not use the mouse or keyboard during
writing.
Use only the software supplied with the
computer for recording.
Do not run or start other software during writing.
Do not jar the computer during writing.
Do not connect/disconnect external devices or
install/remove internal cards during writing.
If problems persist, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-10
Troubleshooting
Printer
Refer also to the Parallel printer section in Chapter 7, Optional Devices,
and to the troubleshooting and other relevant sections in your printer and
software documentation.
Problem
Procedure
Printer does not turn
on
Check that the printer is connected to an
electric. outlet. Make sure the outlet is supplying
power by plugging in an appliance.
Computer/printer do
not communicate
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly.
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Printer error
Check your printer documentation.
If problems persist, contact your dealer.
PC Card
Refer also to Chapter 7, Optional Devices.
Problem Procedure
PC Card error occurs Reseat the PC Card to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
Check the card’s documentation.
If problems persist, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-11
Troubleshooting
Infrared port
Refer also to the documentation for your IrDA compatible device and
related software.
Problem
Procedure
Infrared devices do
Make sure there is no obstruction blocking not
not work as expected communication between the computer and the
target device.
If problems persist, contact your dealer.
Sound system
Problem
Procedure
No sound is heard
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for
I/O address, Interrupt level and DMA are correct
for your software and do not conflict with other
hardware devices that you have connected to
the computer.
If problems persist, contact your dealer.
Pointing device
If you are using a USB mouse, also refer to the USB section in this
chapter and to your mouse documentation.
Touch pad
Problem
Procedure
On-screen pointer
does not respond to
Pad operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it. You may
also press FN + F9 to enable the Touch pad and
then try again to move it.
Try changing the double-click speed setting in
the mouse control utility.
Double-tapping does
not work
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-12
Troubleshooting
Problem
Procedure
Try changing the speed setting in the mouse
control utility.
The mouse pointer
moves too fast or too
slow
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.
USB mouse
Problem
Procedure
On-screen pointer
does not respond to
mouse operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in
the mouse control utility.
Double-clicking does
not work
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Try changing the speed setting in the mouse
control utility.
The mouse pointer
moves too fast or too
slow
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
The mouse pointer
moves erratically
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-13
Troubleshooting
USB
Refer also to your USB device’s documentation.
Problem
Procedure
USB device does not
work
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in BIOS is set to Enabled.
This feature works only for mouse and keyboard.
Also, the mouse and keyboard must be
connected, before you boot the computer.
If problems persist, contact your dealer.
TV output signal
Problem
Procedure
Display on TV is poor
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
No display
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, Keyboard.
If problems persist, contact your dealer.
If you turn the computer off in Standby mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-14
Troubleshooting
Standby/Hibernation
Problem
Procedure
The system will not
enter
Standby/Hibernation
Is Windows Media™ Player open? The system
might not enter Standby/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select Standby/
Hibernation.
If problems persist, contact your dealer.
Memory expansion
Refer also to Chapter 8, Optional Devices, for information on installing
memory modules.
Problem
Procedure
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
Satellite A30 Series.
The computer hangs
up and issue beep
sounds. (A long beep,
three short beeps,
three short beeps, and
then a long beep.)
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adaptor.
6. Turn on the power.
If problems persist, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-15
Troubleshooting
Modem
Problem
Procedure
Communication Make sure the computer’s internal modem
software can’t initialise settings are correct. Refer to Phone and Modem
the modem
Options Properties in the Control Panel.
You can hear a dial
If the call is going through a PBX machine, make
tone but can’t make a sure the communication application’s tone dial
call detection feature is disabled.
You place a call, but a Make sure the settings are correct in your
connection can’t be
made
communications application.
After making a call you Make sure the tone or pulse selection in your
can’t hear a ring communications application is set correctly.
Communication is cut The computer will automatically cut off
off unexpectedly
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
A CONNECT display Check the error control setting in your
is quickly replaced by communications application.
NO CARRIER
Character display
becomes garbled
during a
In data transmission, make sure the parity bit
and stop bit settings correspond with those of
the remote computer.
communication
Check the flow control and communication
protocol.
You cannot receive an Check the rings before auto answer setting in
incoming call
your communications application.
If problems persist, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-16
Troubleshooting
LAN
Problem
Procedure
Cannot access LAN
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Wake up on LAN does Make sure the AC adaptor is connected. You
not work
cannot access a LAN using the computer’s
battery power.
Check the TOSHIBA HW Setup program. The
Wake-up on LAN option of LAN tab should be
set to Enabled.
If problems persist, consult your LAN
administrator.
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator.
For more information on wireless communication, refer to Chapter 4,
Operating Basics.
Problem
Procedure
Cannot access
Wireless LAN
Make sure the computer’s wireless
communication switch is set to on.
Confirm the Fn + F8 function.
If problems persist, consult your LAN
administrator.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-17
Troubleshooting
Monitor
Refer also to Chapter 7, Optional Devices, and to your monitor’s
documentation.
Problem
Procedure
Monitor does not turn Make sure that the external monitor’s power
on
switch is on. Confirm that the external monitor’s
power cable is plugged into a working power
outlet.
No display
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Display error occurs
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
i.LINK (IEEE1394)
Problem
Procedure
i.LINK device does not Make sure the cable is securely connected to the
function
computer and to the device.
Make sure the device’s power is turned on.
Reinstall the drivers. Open the Windows Control
Panel and double-click the Add New Hardware
icon. Follow the on-screen directions.
Restart Windows.
If problems persist, contact your dealer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-18
Troubleshooting
If you need further assistance
If you require any additional help using your computer or if you are having
problems operating the computer, you may need to contact TOSHIBA for
additional technical assistance.
Before you call
Some problems you experience may be related to software or the
operating system, it is important to investigate other sources of
assistance first. Before contacting TOSHIBA, try the following:
■ Review troubleshooting sections in the documentation for software
and peripheral devices.
■ If a problem occurs when you are running software applications,
consult the software documentation for troubleshooting suggestions.
Call the software company’s technical support for assistance.
■ Consult the dealer you purchased your computer and/or software
from. They are your best sources for current information and support.
Where to write
If you are still unable to solve the problem and suspect that it is hardware
related, write to TOSHIBA at the location listed in the accompanying
warranty booklet or visit www.toshiba-europe.com on the Internet.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8-19
Satellite A30 Series
Appendix A
Specifications
This appendix summarizes the computer’s technical specifications.
Environmental Requirements
Conditions
Operating
Ambient temperature Relative humidity
5°C to 30°C
10% to 90%
Non-operating
Conditions
-20°C to 65°C
Altitude (from sea level)
sea level to 3,000 meters
Operating
Non-operating
sea level to 10,000 meters
Built-in Modem
Network control unit (NCU)
Type of NCU
Type of line
AA
Telephone line (analog only)
Type of dialling
Pulse
Tone
Control command
Monitor function
AT commands
EIA-578 commands
Computer’s speaker
User's Manual
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Communication specifications
Communication
system
Data:
Fax:
Full duplex
Half duplex
Communication
protocol
Data:
ITU-T-Rec (Former
CCITT)
V.21/V.22/V.22bis/V.32/
V.32bis/V.34/V.90/V.92
(only for USA and
Canada)
Bell
103/212A
Fax
ITU-T-Rec (Former
CCITT)
V.17/V.29/V.27ter/ V.21
ch2
Communication
speed
Data transmission and reception
300/1200/2400/4800/ 7200/9600/12000/
14400/16800/19200/ 21600/24000/26400/
28800/31200/33600 bps
Data reception only with V.90/V.92
28000/29333/30666/ 32000/33333/34666/
36000/37333/38666/ 40000/41333/42666/
44000/ 45333/46666/48000/
49333/50666/52000/ 53333/54666/56000 bps
Fax:
2400/4800/7200/9600/12000/14400 bps
Error correcting
MNP class 4 and ITU-T V.42
Data compression
MNP class 5 and ITU-T V.42bis
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
A-2
Satellite A30 Series
Appendix B
AC Power Cord and Connectors
The power cord’s AC input plug must be compatible with the various
international AC power outlets and the cord must meet the standards for
the country/region in which it is used. All cords must meet the following
specifications:
Length:
Minimum 2 metres
Minimum 0.75 mm2
Minimum 2 Amperes
Wire size:
Current rating:
Voltage rating:
125 or 250 VAC
(depending on country/region’s power standards)
Certification agencies
U.S. and Canada:
UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2 two conductor
Australia:
Japan:
AS
DENANHO
Europe:
Austria:
Belgium:
Denmark:
Finland:
France:
OVE
CEBEC
DEMKO
SETI
UTE
User's Manual
B-1
Download from Www.Somanuals.com. All Manuals Search And Download.
AC Power Cord and Connectors
Germany:
VDE
Italy:
IMQ
The Netherlands:
Norway:
KEMA
NEMKO
SEMKO
SEV
Sweden:
Switzerland:
United Kingdom:
BSI
In Europe, power cords must be VDE type, H05VVH2-F and two
conductor.
For the United States and Canada, plug configuration must be a 2-15P
(250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code
handbook and the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for the U.S.A. and
Canada, the United Kingdom, Australia and Europe.
USA and Canada
United Kingdom
UL approved
CSA approved
BS approved
Australia
Europe
AS approved
Approved by the
appropriate agency
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
B-2
Keyboard Layouts
Danish
French
German
Satellite A30 Series
C-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Layouts
Greek
Hebrew
Italian
Satellite A30 Series
C-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Layouts
Norwegian
Polish
Portuguese
Satellite A30 Series
C-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Layouts
Russian
Spanish
Swedish
Satellite A30 Series
C-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Layouts
Swiss-German
Turkish
UK English
Satellite A30 Series
C-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Layouts
US English
Satellite A30 Series
C-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Satellite A30 Series
Appendix D
Display Modes
This appendix is a table of the display mode options of your computer's
Intel 852GME Mobility Graphics Controller; when display device is set to
external monitor.
CRT Display
Resolution
Colour Depth
Refresh Rate (Hz)
800x600
16bpp
32bpp
60 75 85 100
60 75 85 100
1024x768
1280x1024
1400x1050
1600x1200
1920x1440
16bpp
32bpp
60 75 85 100
60 75 85 100
16bpp
32bpp
60 75 85 100
60 75 85 100
16bpp
32bpp
60 75 85 100
60 75 85 100
16bpp
32bpp
60 75 85 100
60
16bpp
32bpp
60
60
User's Manual
D-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Satellite A30 Series
Appendix E
If your computer is stolen
Always take care of your computer and try to prevent it from being stolen.
You are the owner of a valuable technical device, which may be highly
attractive to thieves, so please do not leave it unattended in a public
place. To further help protect against theft, security cables can be bought
for use with your notebook when it is being used at home or in the office.
Make a note of your computer’s machine type, model number, and serial
number, and put it in a safe place. You will find this information on the
underside of your notebook. Please also keep the receipt of the computer
you purchased.
Should your computer be stolen, however, we’ll help you try to find it.
Before contacting TOSHIBA, please prepare the following information
which is necessary to uniquely identify your computer:
■ In which country was your computer stolen?
■ What type of machine do you have?
■ What was the model number (PA number)?
■ What was the serial number (8 digits)?
■ When was it stolen, i.e. date?
■ What was the warranty seal number (if available)?
■ What is your address, phone, and fax number?
To register the theft, please follow these procedures:
■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below.
■ Attach a copy of your receipt showing where your computer was
purchased.
■ Either fax or send the receipt and registration form to the address
below.
Your registration will be entered in a database, which is used to track
TOSHIBA computers at our service points around Europe.
User's Manual
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
If your computer is stolen
TOSHIBA Theft Registration
Send to:
TOSHIBA Europe GmbH
Technical Service and Support
Leibnizstr. 2
93055 Regensburg
Germany
Fax number:
+49 (0) 941 7807 925
Country stolen:
Machine type:
(e.g. Satellite A30)
Model number:
(e.g. PSA10E YXT)
Serial number:
(e.g. 70123456E)
Date stolen:
Warranty seal:
(e.g. 9813 123456 049)
Owner’s details
Name:
Company:
Street:
Postal Code/City:
Country:
Phone:
Fax:
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
E-2
Satellite A30 Series
Appendix F
ASCII Character Codes
This appendix shows the American Standard Code for Information
Interchange (ASCII) on the following pages. The characters in the IBM
charcolumn appear on your display when you type the corresponding
ASCII code (as described in Chapter 5, The Keyboard). The characters
that are printed, however, depend on the software you are using. For
most software, the printed output for decimal codes 32 to 128 will match
your screen display.
User's Manual
F-1
Download from Www.Somanuals.com. All Manuals Search And Download.
ASCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
Ctrl
char
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
000
1
2
3
4
5
6
7
8
NUL
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
HT
LF
VT
FF
♥
♦
♣
♠
•
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
CR
SO
SI
DLE
DC1
DC2
DC3
DC4
NAK
SYN
ETB
CAN
EM
SUB
ESC
FS
!!
¶
§
↑
↓
→
←
↔
▲
▼
GS
RS
US
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
F-2
ASCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
Dec
code
Hex
code
IBM
char
Sort
seq
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
space
!
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
@
A
B
C
D
E
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
“
#
$
%
&
’
(
)
*
+
,
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
-
.
/
0
1
2
3
4
5
6
7
8
9
:
T
U
V
W
X
Y
Z
[
\
]
^
;
<
=
>
?
_
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
F-3
ASCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
Dec
code
Hex
code
IBM
char
Sort
seq
096
097
098
099
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
’
96
97
98
99
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
9E
9F
Ç
ü
é
â
ä
à
å
ç
ê
ë
è
ï
î
ì
Ä
Å
É
æ
Æ
ô
ö
ò
û
ù
ÿ
Ö
Ü
¢
£
¥
Pt
ƒ
67
85
69
65
65
65
65
67
69
69
69
73
73
73
65
65
69
65
65
79
79
79
85
85
89
79
85
36
36
36
36
36
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
s
t
u
v
w
x
y
z
{
}
~
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
F-4
ASCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
Dec
code
Hex
code
IBM
char
Sort
seq
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
B0
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
á
í
65
73
79
85
78
78
166
167
63
169
170
171
172
33
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
C0
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
ó
ú
ñ
Ñ
a
o
¿
1
2
4
1
¡
«
»
34
34
CF
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
BF
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
F-5
ASCII Character Codes
Dec
code
Hex
code
IBM
char
Sort
seq
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
α
ß
83
Γ
Π
∑
σ
µ
ϒ
Φ
Θ
Ω
δ
ϕ
φ
Ε
Λ
Ξ
≥
≤
⌠
⌡
÷
≈
°
√
η
2
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
F-6
Satellite A30 Series
Glossary
The terms in this glossary cover topics related to this manual. Alternate
naming is included for reference.
A
adaptor: A device that provides an interface between two dissimilar
electronic devices. For example, the AC adaptor modifies the
power from a wall outlet for use by the computer. This terms also
refers to the add-in circuit cards that control external devices,
such as video monitors and magnetic tape devices.
allocate: To assign a space or function for a specific task.
alphanumeric: Keyboard characters including letters, numbers and other
symbols, such as punctuation marks or mathematical symbols.
alternating current (AC): Electric current that reverses its direction of
flow at regular intervals.
analogue signal: A signal whose characteristics such as amplitude and
frequency vary in proportion to (are an analogue of) the value to be
transmitted. Voice communications are analogue signals.
ANSI: American National Standards Institute. An organisation established
to adopt and define standards for a variety of technical disciplines.
For example, ANSI defined the ASCII standard and other
information processing requirements.
antistatic: A material used to prevent the build-up of static electricity.
application: A group of programs that together are used for a specific
task such as accounting, financial planning, spreadsheets, word
processing, and games, etc.
ASCII: American Standard Code for Information Interchange. ASCII code
is a set of 256 binary codes that represent the most commonly
used letters, numbers, and symbols.
async: Short for asynchronous.
User's Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
asynchronous: Lacking regular time relationship. As applied to computer
communications, asynchronous refers to the method of
transmitting data that does not require a steady stream of bits to
be transmitted at regular time intervals.
AUTOEXEC.BAT: A batch file that executes a series of MS-DOS
commands and programs each time you start the computer. This
is no longer necessarily used when booting Windows NT 4.0 and
higher.
B
backup: A duplicate copy of files kept as a spare in case the original is
destroyed.
batch file: A file that can be executed from the system prompt containing
a sequence of operating system commands or executable files.
See also AUTOEXEC.BAT.
billion byte (Bi.B): A unit of data storage equal to 1,000,000,000 bytes.
See also million byte.
binary: The base two number system composed of zeros and ones (off or
on), used by most digital computers. The right most digit of a
binary number has a value of 1, the next a value of 2, then 4, 8, 16,
and so on. For example, the binary number 101 has a value of 5.
See also ASCII.
BIOS: Basic Input Output System. The firmware that controls data flow
within the computer. See also firmware.
bit: Derived from "binary digit," the basic unit of information used by the
computer. It is either zero or one. Eight bits is one byte. See also
byte.
Bluetooth: A short-range radio technology designed to simplify wireless
communication among computers, communication devices and
the Internet.
board: A circuit board. An internal card containing electronic
components, called chips, which perform a specific function or
increase the capabilities of the system.
boot: Short for bootstrap. A program that starts or restarts the computer.
The program reads instructions from a storage device into the
computer’s memory.
bps: Bits per second. Typically used to describe the data transmission
speed of a modem.
buffer: The portion of the computer’s memory where data is temporarily
stored. Buffers often compensate for differences in the rate of flow
from one device to another.
bus: An interface for transmission of signals, data or electric power.
byte: The representation of a single character. A sequence of eight bits
treated as a single unit; also the smallest addressable unit within
the system.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Glossary
C
cache memory: High speed memory which stores data that increases
processor speed and data transfer rate. When the CPU reads data
from main memory, it stores a copy of this data in cache memory.
The next time the CPU needs that same data, it looks for it in the
cache memory rather than the main memory, which saves time.
The computer has two cache levels. Level one is incorporated into
the processor and level two resides in external memory.
capacity: The amount of data that can be stored on a magnetic storage
device such as a diskette (floppy disk) or hard disk. It is usually
described in terms of kilobytes (KB), where one KB = 1024 bytes
and megabytes (MB), where one MB = 1024 KB.
Card Station II: A device that enables one-point connection to a number
of peripheral devices and provides additional ports and slots.
card: Synonym for board. See board.
CardBus: An industry standard bus for 32-bit PC Cards.
CD-ROM: A Compact Disc-Read Only Memory is a high capacity disc
that can be read from but not written to. The CD-ROM drive uses a
laser, rather than magnetic heads, to read data from the disc.
CD-RW: A Compact Disc-Read/Write disc can be rewritten many times.
Centronics: A printer manufacturer whose method of data transmission
between a parallel printer and a computer has become an industry
standard.
CGA: Colour/graphics adaptor. A video display protocol defined by the
IBM Colour/Graphics Monitor Adaptor and its associated circuitry.
This protocol supports two-colour 640x200 and four-colour
320x200 graphics, and 16-colour 640x200 and 320x200 text
modes.
character: Any letter, number, punctuation mark, or symbol used by the
computer. Also synonymous with byte.
chassis: The frame containing the computer.
chip: A small semiconductor containing computer logic and circuitry for
processing, memory, input/output functions and controlling other
chips.
CMOS: Complementary Metal-Oxide Semiconductor. An electronic
circuit fabricated on a silicon wafer that requires very little power.
Integrated circuits implemented in CMOS technology can be
tightly packaged and are highly reliable.
cold start: Starting a computer that is currently off (turning on the power).
COM1, COM2, COM3 and COM4: The names assigned to the serial and
communication ports.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Glossary
commands: Instructions you enter at the terminal keyboard that direct
the actions of the computer or its peripheral devices.
communications: The means by which a computer transmits and
receives data to and from another computer or device.
Compact Flash: A small removable mass storage device, designed with
flash technology, a non-volatile storage solution that does not
require a battery to retain data indefinitely.
compatibility: 1) The ability of one computer to accept and process data
in the same manner as another computer without modifying the
data or the media upon which it is being transferred. 2) the ability
of one device to connect to or communicate with another system
or component.
components: Elements or parts (of a system) which make up the whole
(system).
computer program: A set of instructions written for a computer that
enable it to achieve a desired result.
computer system: A combination of hardware, software, firmware, and
peripheral components assembled to process data into useful
information.
configuration: The specific components in your system (such as the
terminal, printer, and disk drives) and the settings that define how
your system works. You use the HW Setup program to configure
your system.
control keys: A key or sequence of keys you enter from the keyboard to
initiate a particular function within a program.
controller: Built-in hardware and software that controls the functions of a
specific internal or peripheral device (e.g. keyboard controller).
CPS: Characters per second. Typically used to indicate the transmission
speed of a printer.
CPU: Central processing unit. The portion of the computer that interprets
and executes instructions.
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a
fluorescent screen-producing luminous spots. An example is the
television set.
cursor: A small, blinking rectangle or line that indicates the current
position on the display screen.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Glossary
D
data bits: A data communications parameter controlling the number of
bits (binary digits) used to make up a byte. If data bits = 7 the
computer can generate 128 unique characters. If data bits = 8 the
computer can generate 256 unique characters.
data: Information that is factual, measurable or statistical that a computer
can process, store, or retrieve.
DC: Direct Current. Electric current that flows in one direction. This type
of power is usually supplied by batteries.
default: The parameter value automatically selected by the system when
you or the program do not provide instructions. Also called a
preset value.
delete: To remove data from a disk or other data storage device.
Synonymous with erase.
Desk Station V Plus: An expansion device that provides the computer
with additional ports, slots and bays.
device driver: A program that controls communication between a
specific peripheral device and the computer. The CONFIG.SYS file
contains device drivers that MS-DOS loads when you turn the
computer on.
dialog box: A Windows element that requires the user to provide further
information, such as number of copies to print.
disk drive: The device that randomly accesses information on a disk and
copies it to the computer’s memory. It also writes data from
memory to the disk. To accomplish these tasks, the unit physically
rotates the disk at high speed past a read-write head.
disk storage: Storing data on magnetic disk. Data is arranged on
concentric tracks much like a phonograph record.
diskette: A removable disk that stores magnetically encoded data used
on a microcomputer. Also called floppy disk.
display: A CRT, plasma screen, LCD, or other image producing device
used to view computer output.
documentation: The set of manual and/or other instructions written for
the users of a computer system or application. Computer system
documentation typically includes procedural and tutorial
information as well as system functions.
driver: A software program, generally part of the operating system, that
controls a specific piece of hardware (frequently a peripheral
device such as a printer or mouse).
dual-scan supertwisted nematic (DSTN) display: A thin-screen,
passive matrix colour LCD that meets VGA standards.
DVD-R: A Digital Versatile Disc-Recordable disk can be written once and
read many times.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Glossary
DVD-RAM: A Digital Versatile Disc Random Access Memory is a high-
capacity, high performance disc that lets you store large volumes
of data. The DVD drive uses a laser to read data from the disc.
DVD-ROM: A Digital Versatile Disc Read Only Memory is a high capacity,
high performance disc suitable for play back of video and other
high-density files. The DVD drive uses a laser to read data from the
disc.
DVD-RW: A Compact Disc-Read/Write disc can be rewritten many times.
E
echo: To send back a reflection of the transmitted data to the sending
device. You can display the information on the screen, or output it
to the printer, or both. When a computer receives back data it
transmitted to a CRT (or other peripheral device) and then
retransmits the data to printer, the printer is said to echo the CRT.
EGA: Enhanced Graphics Adaptor. A video display protocol defined by
the IBM Enhanced Graphics Adaptor and its associated circuitry
for direct drive TTL displays that supports 16-colour/monochrome
640x350 and 16-colour 640x200 and 320x200 graphics, and
16-colour 640x350 and 320x350 text modes.
erase: See delete.
escape guard time: A time before and after an escape code is sent to
the modem which distinguishes between escapes that are part of
the transmitted data, and escapes that are intended as a
command to the modem.
escape: 1) A code (ASCII code 27), signalling the computer that what
follows are commands; used with peripheral devices such as
printers and modems. 2) A means of aborting the task currently in
progress.
execute: To interpret and execute an instruction.
Extended Capability Port: An industry standard that provides a data
buffer, switchable forward and reverse data transmission, and run
length encoding (RLE) support.
F
fast infrared: An industry standard that enables cableless infrared serial
data transfer at speeds of up to 4 Mbps.
file: A collection of related information; a file can contain data, programs,
or both.
firmware: A set of instructions built into the hardware which controls and
directs a microprocessor’s activities.
fixed disk: See hard disk.
floppy disk drive (FDD): An electromechanical device that reads and
writes to floppy disks. See also diskette.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Glossary
floppy disk: See diskette.
folder: An icon in Windows used to store documents or other folders.
format: The process of readying a blank disk for its first use. Formatting
establishes the structure of the disk that the operating system
expects before it writes files or programs onto the disk.
function keys: The keys labelled F1 through F12 that tell the computer to
perform certain functions.
G
H
gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also
megabyte.
GND: Ground. An RS-232C signal used in the exchange of data between
a computer and serial device.
graphics: The use of drawings, pictures, or other images, such as charts
or graphs, to present information.
hard disk drive (HDD): An electromechanical device that reads and
writes a hard disk. See also hard disk.
hard disk: A non-removable disk usually referred to as drive C. The
factory installs this disk and only a trained engineer can remove it
for servicing. Also called fixed disk.
hardware: The physical electronic and mechanical components of a
computer system: typically, the computer itself, external disk
drives, etc. See also software and firmware.
HW Setup: A TOSHIBA utility that lets you set the parameters for various
hardware components.
hertz: A unit of wave frequency that equals one cycle per second.
hexadecimal: The base 16 numbering system composed of the digits 0
through 9 and the letters A, B, C, D, E, and F.
host computer: The computer that controls, regulates, and transmits
information to a device or another computer.
hotkey: A TOSHIBA feature in which certain keys in combination with the
extended function key, Fn, can be used to set system parameters,
such as speaker volume.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Glossary
I
I/O devices: Equipment used to communicate with the computer and
transfer data to and from it.
I/O: Input/output. Refers to acceptance and transfer of data to and from a
computer.
icon: A small graphic image displayed on the screen or in the indicator
panel. In Windows, an icon represents an object that the user can
manipulate.
infrared port: A cableless communications port capable of using infrared
signals to send serial data.
input: The data or instructions you provide to a computer,
communication device or other peripheral device from the
keyboard or external or internal storage devices. The data sent (or
output) by the sending computer is input for the receiving
computer.
instruction: Statements or commands that specify how to perform a
particular task.
interface: 1) Hardware and/or software components of a system used
specifically to connect one system or device to another.
2) To physically connect one system or device to another to
exchange information. 3) The point of contact between user, the
computer, and the program, for example, the keyboard or a menu.
interrupt request: A signal that gives a component access to the
processor.
IrDA 1.1: An industry standard that enables cableless infrared serial data
transfer at speeds of up to 4 Mbps.
K
K: Taken from the Greek word kilo, meaning 1000; often used as
equivalent to 1024, or 2 raised to the 10th power. See also byte
and kilobyte.
KB: See kilobyte.
keyboard: An input device containing switches that are activated by
manually pressing marked keys. Each keystroke activates a switch
that transmits a specific code to the computer. For each key, the
transmitted code is, in turn, representative of the (ASCII) character
marked on the key.
kilobyte (KB): A unit of data storage equal to 1024 bytes. See also byte
and megabyte.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Glossary
L
level 2 cache: See cache.
Light Emitting Diode (LED): A semiconductor device that emits light
when a current is applied.
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets
of glass coated with transparent conducting material. The viewing-
side coating is etched into character forming segments with leads
that extend to the edge of the glass. Applying a voltage between
the glass sheets alters the brightness of the liquid crystal.
LSI: Large Scale Integration. 1) A technology that allows the inclusion of
up to 100,000 simple logic gates on a single chip. 2) An integrated
circuit that uses the large scale integration.
M
magiCDisc: A TOSHIBA utility that lets you create a CD-ROM data base
for quick access to CD-ROM data.
main board: See motherboard.
maths co-processor: A circuit built into the processor that is dedicated
to intensive math calculations.
MDA: Monochrome Display Adaptor. A video display protocol defined by
the IBM Monochrome Display Adaptor and its associated circuitry
for direct drive TTL displays that supports a monochrome 720x350
text mode.
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also
kilobyte.
megahertz: A unit of wave frequency that equals 1 million cycles per
second. See also hertz.
Memory Stick: An IC recording media designed to record various kinds
of digital content such as still and moving images, music and
computer data on a single stick.
menu: A software interface that displays a list of options on the screen.
Also called a screen.
microprocessor: A hardware component contained in a single integrated
circuit that carries out instructions. Also called the central
processing unit (CPU), one of the main parts of the computer.
million byte: A unit of data storage equal to 1,000,000 bytes.
MMX: Refers to microprocessors with additional instructions beyond the
x86 standard. The instructions were developed on the basis of
multimedia code requirements and thus improve the performance
of multimedia applications.
mode: A method of operation, for example, the boot mode, standby
mode or the hibernation mode.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Glossary
modem: Derived from modulator/demodulator, a device that converts
(modulates) digital data for transmission over telephone lines and
then converts modulated data (demodulates) to digital format
where received.
monitor: A device that uses rows and columns of pixels to display
alphanumeric characters or graphic images. See CRT.
motherboard: A name sometimes used to refer to the main printed circuit
board in processing equipment. It usually contains integrated
circuits that perform the processor’s basic functions and provides
connectors for adding other boards that perform special functions.
Sometimes called a main board.
MPEG: Moving picture coding expert group is an industry standard
architecture for compression of video signals.
MP3: An audio compression standard that enables high-quality
transmission and real-time playback of sound files.
N
O
non-system disk: A formatted diskette (floppy disk) you can use to store
programs and data but you cannot use to start the computer. See
system disk.
non-volatile memory: Memory, usually read-only (ROM), that is capable
of permanently storing information. Turning the computer’s power
off does not alter data stored in non-volatile memory.
numeric keypad overlay: A feature that allows you to use certain keys on
the keyboard to perform numeric entry, or to control cursor and
page movement.
OCR: Optical Character Recognition (reader). A technique or device that
uses laser or visible light to identify characters and input them into
a storage device.
OCR wand: A device that reads, using an optical device, hand written or
machine printed symbols into a computer. See also OCR.
on-line state: A functional state of a peripheral device when it is ready to
receive or transmit data.
operating system: A group of programs that controls the basic operation
of a computer. Operating system functions include interpreting
programs, creating data files, and controlling the transmission and
receipt (input/output) of data to and from memory and peripheral
devices.
output: The results of a computer operation. Output commonly indicates
data 1) printed on paper, 2) displayed at a terminal, 3) sent through
the serial port of internal modem, or 4) stored on some magnetic
media.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Glossary
P
parallel interface: Refers to a type of information exchange that
transmits information one byte (8 bits) at a time. See also serial
interface.
parallel: Refers to two or more processes or events that can occur
simultaneously, and without interfering with each other. See also
serial.
parity: 1) The symmetrical relationship between two parameter values
(integers) both of which are either on or off; odd or even; 0 or 1.
2) In serial communications, an error detection bit that is added to
a group of data bits making the sum of the bits even or odd. Parity
can be set to none, odd, or even.
password: A unique string of characters used to identify a specific user.
The computer provides various levels of password protection such
as user, supervisor and eject.
pel: The smallest area of the display that can be addressed by software.
Equal in size to a pixel or group of pixels. See pixel.
peripheral component interconnect: An industry standard 32-bit bus.
peripheral device: An I/O device that is external to the central processor
and/or main memory such as a printer or a mouse.
pixel: A picture element. The smallest dot that can be made on a display
or printer. Also called a pel.
port replicator: See Card Station II.
port: The electrical connection through which the computer sends and
receives data to and from devices or other computers.
Power Saver Utility: A TOSHIBA utility that lets you set the parameters
for various power-saving functions.
printed circuit board (PCB): A hardware component of a processor to
which integrated circuits and other components are attached. The
board itself is typically flat and rectangular, and constructed of
fibreglass, to form the attachment surface.
program: A set of instructions a computer can execute that enables it to
achieve a desired result. See also application.
prompt: A message the computer provides indicating it is ready for or
requires information or an action from you.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Glossary
R
Radio frequency interference (RFI) shield: A metal shield enclosing the
printed circuit boards of the printer or computer to prevent radio
and TV interference. All computer equipment generates radio
frequency signals. The FCC regulates the amount of signals a
computing device can allow past its shielding. A Class A device is
sufficient for office use. Class B provides a more stringent
classification for home equipment use. TOSHIBA portable
computers comply with Class B computing device regulations.
RAMDRIVE: Part of the computer’s random access memory assigned to
simulate a disk. RAMDRIVE is a feature of MS-DOS.
Random Access Memory (RAM): High speed memory within the
computer circuitry that can be read or written to.
RCA jack: A single-pin connector that carries composite video signals,
which include both contrast and colour information. See also
S-video.
restart: Resetting a computer without turning it off (also called ‘warm
boot’ or ‘soft reset’). To restart the computer, press Ctrl + Alt +
Del while the computer is on. See also boot.
resume: A feature that lets you turn off the power without first exiting a
program and retain your data in RAM. When you turn on the
computer, the screen appears the same as when you turned it off.
Also called standby in Windows 98.
RGB: Red, green, and blue. A device that uses three input signals, each
activating an electron gun for a primary additive colour (red, green,
and blue) or port for using such a device. See also CRT.
RJ11: A modular telephone jack.
ROM: Read Only Memory: A non-volatile memory chip manufactured to
contain information that controls the computer’s basic operation.
You cannot access or change information stored in ROM.
RS-232C: The Electronic Industries Association (EIA) interface standard
that describes the 25-pin connector interface and control, data,
and status signals that allow asynchronous communications
between computers, printers, communications and other
peripheral devices.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Glossary
S
SCSI: Small Computer System Interface is an industry standard interface
for connection of a variety of peripheral devices.
SD cards: Secure Digital cards are flash memory widely used in a variety
of digital devices such as digital cameras and Personal Digital
Assistants.
serial port: A communications port to which you can connect devices,
such as a modem, mouse, or serial printer.
serial: The handling of data bits one after the other.
SIO: Serial Input/Output. The electronic methodology used in serial data
transmission.
Smart media: A storage card of about one-thirds of the area of a
conventional PC card and only 0.76mm thickness. It can be used
in equipment that requires a removable memory chip for
portability.
soft key: Key combinations that emulate keys on the IBM keyboard,
change some configuration options, stop program execution, and
access the numeric keypad overlay.
software: The set of programs, procedures and related documentation
associated with a computer system. Specifically refers to
computer programs that direct and control the computer system’s
activities. See also hardware.
standby: See resume.
stop bit: One or more bits of a byte that follow the transmitted character
or group codes in asynchronous serial communications.
subpixel: Three elements, one red, one green and blue (RGB), that make
up a pixel on the colour LCD. The computer sets subpixels
independently, each may emit a different degree of brightness.
See also pixel.
suspend: See resume.
S-video: This connection provides separate lines for contrast and colour,
which produces a video image superior to that produced by a
composite connection. See also RCA jack.
synchronous: Having a constant time interval between successive bits,
characters or events.
system disk: A disk that has been formatted with an operating system.
For MS-DOS the operating system is contained in two hidden files
and the COMMAND.COM file. You can boot a computer using a
system disk. Also called an operating system disk.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Glossary
T
terminal: A typewriter-like keyboard and CRT display screen connected
to the computer for data input/output.
TFT: Thin-film transistor. A colour LCD technology that applies individual
transistors to each pixel enabling fine display control and excellent
screen legibility.
touch pad: A pointing device integrated into the TOSHIBA computer
palm rest.
TTL: Transistor-transistor logic. A logic circuit design that uses switching
transistors for gates and storage.
U
V
USB: The Universal Serial Bus is a way to connect up to 127 devices
through one connector. A new development in 1997, this offers
significantly improved ease of use and reliability than earlier
expansion methods.
VGA: Video Graphics Array is an industry standard video adaptor that lets
you run any popular software.
volatile memory: Random access memory (RAM) that stores information
as long as the computer is connected to a power source.
W
warm start: Restarting or resetting a computer without turning it off.
window: A portion of the screen that can display its own application or
document. Often used to mean a Microsoft Windows window.
wireless LAN: Local Area Network (LAN) through wireless
communication. A short-range radio technology designed to
simplify wireless communication with other LAN systems based on
Direct Sequence Spread Spectrum radio technology that complies
with the IEEE 802.11 Standard (Revision B).
write protection: A method for protecting a diskette (floppy disk) from
accidental erasure.
Z
ZV port: Zoomed Video port dedicated to high-performance video data
transfer.
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Satellite A30 Series
Index
A
AC adaptor, 2-13
C
cards
additional, 7-7
connecting, 3-5
Modem/LAN, 1-4
PC, 1-4
PC card, 7-1
CD
B
battery, 2-6
care, 4-11
loading, 4-4
removing, 4-7
writing, 4-9
additional, 7-7
care, 6-5
charging, 6-8
indicator, 6-2
installing, 6-13
Latch, 2-6
maximizing, 6-10
monitoring, 6-10
pack, 6-4
problems, 8-6
Real Time Clock, 6-4
removing, 6-12
replacing, 6-11
safety precautions, 6-5
types, 6-3
CD/Digital Mode button, 4-8
CD/DVD/Audio control buttons, 4-8
Certification agencies, B-1
cleaning the computer, 4-18
Communications, 1-6
compact discs
care, 4-11
loading, 4-4
removing, 4-7
writing, 4-9
computer
cleaning, 4-18
moving, 4-19
restarting, 3-12
buttons
CD/Digital, 4-8
CD/DVD/Audio control buttons,
4-8
Copyright, ii
Internet, 2-8
Power, 2-7
TOSHIBA Console, 2-8
TV-Out, 2-8
User's Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
D
DC IN
I
i.LINK, 7-11
indicator, 6-3
port, 1-5, 2-4
DC IN 19 V Jack, 2-6
Dimensions, 1-6
Disclaimer, ii
diskette
problems, 8-18
indicators, 2-9
keyboard, 2-8
infrared port, 1-5, 2-4
problems, 8-12
Internet Button, 2-8
care, 4-11
diskette drive, 2-11
Disks, 1-4
display
hinges, 2-8
latch, 2-2
lid switch, 2-8
opening, 3-6
screen, 2-8
DVD
K
keyboard, 5-1
emulation keys, 5-3
F1...F12 function keys, 5-2
indicators, 2-8
problems, 8-7
soft keys
Fn key combinations, 5-2
typewriter keys, 5-1
keypad overlay, 5-6
arrow mode, 5-6
care, 4-11
loading, 4-4
removing, 4-7
writing, 4-9
numeric mode, 5-7
temporarily changing modes,
5-8
temporarily using the normal
keyboard, 5-7
temporarily using the overlay,
E
EMC Regulatory Information, vi
Equipment checklist, 1-1
EU Declaration of Conformity, ii
Expansion Memory Socket, 2-6
External monitor, 7-8
port, 1-5, 2-5
F
Fixed Bay, 2-6
L
LAN, 4-16
Fn+Ctrl (enhanced keyboard
simulation), 5-3
Fn+Enter, 5-3
Jack, 2-5
problems, 8-17
LCD panel
Fn+F10 (arrow mode), 5-3, 5-6
Fn+F11 (numeric mode), 5-3, 5-7
Fn+F12 (ScrLock), 5-3
problems, 8-7
Lighting, 3-3
Line-In Jack, 2-3
G
H
hard disk drive
problems, 8-8
Headphone Jack, 2-3
Hibernation
automatic, 6-14
problems, 8-15
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Index
M
memory, 1-3
P
Panel power off/on, 6-14
Parallel port, 1-5, 2-5
Parallel printer, 7-7
PC Card, 1-4, 7-1
installing, 7-2
problems, 8-11
removing, 7-3
Slot, 2-4
expansion, 7-4
installing memory module, 7-4
problems, 8-15
removing memory module, 7-6
Microphone Jack, 2-3
modem
connecting, 4-15
disconnecting, 4-15
jack, 2-5
problems, 8-16
safety, 4-12
using, 4-12
ports
DC IN 19 V, 2-6
External monitor, 1-5
External Monitor, 2-5
Headphone, 2-3
i.LINK, 1-5
Modem warning notice, x
Modem/LAN card, 1-4
monitor
i.LINK, 2-4
infrared, 1-5, 2-4
LAN, 2-5
Line-In, 2-3
Microphone, 2-3
Modem, 2-5
problems, 8-18
moving the computer, 4-19
Multidrive & DVD-R/RW
problems, 8-9
Multimedia, 1-5
Parallel, 1-5, 2-5
PC Card, 2-4
S-Video, 1-5, 2-6
USB, 1-5, 2-5
Power, 1-3
N
numeric keypad, 5-6
O
Button, 2-7
Optical media drive, 2-12
problems, 8-8
safety precautions, 4-3
using, 4-3
Options, 1-9
conditions, 6-1
Hibernation mode, 3-8
indicators, 6-2
battery, 6-2
DC IN, 6-3
power, 6-3
problems, 8-4
Shut Down mode (Boot mode),
3-8
Standby mode, 3-10
turning off, 3-8
turning on, 3-7
Power-up modes, 6-14
printer
problems, 8-11
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Index
problems
analysing symptoms, 8-2
battery, 8-6
S
Safety Instructions, iii
Seating and posture, 3-3
Security, 1-7
hard disk drive, 8-8
hardware and system checklist,
8-3
Hibernation, 8-15
i.LINK, 8-18
identifying cause, 8-1
infrared port, 8-12
initial precautions, 8-1
keyboard, 8-7
LAN, 8-17
LCD panel, 8-7
memory, 8-15
modem, 8-16
monitor, 8-18
Multidrive & DVD-R/RW, 8-9
Optical media drive, 8-8
PC Card, 8-11
lock, 2-3, 7-12
self test, 8-4
sockets
Expansion Memory, 2-6
Wireless LAN, 2-6
Soft keys, 5-2
Alt Gr Key Combinations, 5-2
software
restoring, 3-12
Sound system
problems, 8-12
Speakers, 2-1, 2-3
Specifications, A-1
Standby
automatic, 6-14
problems, 8-15
Power, 8-4
S-Video port, 1-5, 2-6
System automatic Standby/
Hibernation, 6-14
System Indicators, 2-1
preliminary checklist, 8-2
printer, 8-11
self test, 8-4
Sound system, 8-12
Standby, 8-15
T
support from TOSHIBA, 8-19
system start-up, 8-3
Touch pad, 8-12
TV, 8-14
Television, 7-8
TOSHIBA Console Button, 2-8
Touch pad, 2-7
Control Buttons, 2-7
problems, 8-12
using, 4-1
USB, 8-14
USB mouse, 8-13
Wireless LAN, 8-17
Processor, 1-2
Trademarks, ii
TV
problems, 8-14
TV-Out, 4-18
R
Real Time Clock battery, 6-4
Restarting the computer, 3-12
Restoring the preinstalled software,
3-12
U
USB
port, 1-5, 2-5
problems, 8-14
USB mouse
problems, 8-13
Utilities, 1-9
V
Volume Control, 2-3
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Index
W
Weight, 1-6
Windows special keys, 5-6
Wireless communications, 2-3,
4-17
Wireless LAN
problems, 8-17
Socket, 2-6
Work habits, 3-4
Satellite A30 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
5
|