TOSHIBA POS Terminal
ST-7000C SERIES
Owner's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Compliance (for EU only)
This product complies with the requirements of EMC and Low Voltage Directives including their
amendments.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Warnung
Dies ist ein Klasse A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen.
ATTENTION
Ce produit est de classe A. Dans un environnement domestique, il peut causer des interférences radio.
Auquel cas, l’utilisateur sera amené à prendre les mesures adéquates.
Atención
Este es un producto de la clase A. En ambientes domésticos éste producto puede causar radio
interferencias en cuyo caso el usuario deberá tomar las medldas oportunas.
VERWITTIGING
Dit is een klasse A produkt. Het gebruik hiervan kan radio interferenties veroorzaken die de gebruiker ertoe
kunnen dwigen sommige maatregelen te moeten treffen.
Avviso
Questo è un apparecchio di Classe A. In un ambiente residenziale questo apparecchio quò provocare
radiodisturbi. In questo caso può essere richiesto all’utilizzatore di prendere misure adeguate.
Schallemission: unter 70dB (A) nach DIN 45635 (ISO7779)
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at this own expense.
Changes or modifications not expressly approved by manufacturer for compliance could void the user’s
authority to operate the equipment.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Celeron is a registered trademark of Intel Corporation.
Copyright © 2005
by TOSHIBA TEC CORPORATION
< For EU Only >
TOSHIBA TEC Europe Retail Information Systems S.A.
Rue de la Célidée 33 BE-1080 Brussels
All Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Waste Recycling information for users:
Following information is only for EU-member states:
The crossed out wheeled bin symbol is used to indicate that the product must not be treated as general household waste.
By ensuring that this product is disposed of correctly you will be helping to prevent potentially negative consequences for
the environment and human health, which could otherwise be caused by incorrect waste handling of this product.
For more detailed information about the take-back and recycling of this equipment, please contact the supplier that
provided you with the product in question.
French
Information aux utilisateurs concernant le recyclage des déchets:
Les informations suivantes sont uniquement destinées aux pays membres de l’Union Européenne:
L’utilisation du symbole de "poubelle à roulettes barrée" indique que ce produit ne doit pas être traité comme un déchet
ménager classique.
En vous assurant que ce produit est correctement mis au rebut, vous participerez à la prévention de l’environnement et
de la santé publique, contre des conséquences négatives potentielles qui pourraient résulter d’un traitement inapproprié
des déchets de ce produit. Pour obtenir des informations complémentaires concernant la récupération et le recyclage de
ce produit, veuillez contacter le fournisseur auprès duquel vous avez acheté le produit.
German
Wiederverwertungsinformationen für Verbraucher:
Die folgenden Informationen gelten nur für EU-Mitgliedsstaaten:
Das durchgestrichene Mülltonnensymbol weist darauf hin, dass dieses Produkt nicht wie allgemeiner Haushaltsmüll
behandelt werden darf.
Indem Sie aktiv mitwirken, dieses Produkt ordnungsgemäß zu entsorgen, helfen Sie mit, mögliche negative
Auswirkungen auf die Umwelt sowie die menschliche Gesundheit zu vermeiden, die sonst durch die unsachgemäße
Entsorgung dieses Produktes beeinträchtigt werden könnten.
Für nährere Informationen zur Rücknahme und Wiederverwertung dieses Produktes wenden sie sich bitte an den
Lieferanten, von dem Sie dieses Produkt erworben haben.
Spanish
Información para usuarios sobre el reciclaje de residuos:
La siguiente información sólo concierne a los Estados Miembros de la UE:
El uso del símbolo de un contenedor con ruedas tachado indica que este producto no puede ser tratado como si fuera
un residuo doméstico.
Asegurando que nos deshacemos de este producto de forma correcta, ayudaremos a evitar potenciales consecuencias
negativas tanto para el medio ambiente como para la salud pública, que podrían producirse debido a un tratamiento
inapropiado de este producto. Para obtener una información más detallada sobre la recogida y reciclaje de su producto,
por favor, póngase en contacto con el proveedor donde lo compró.
Dutch
Gebruikersinformatie over het recycleren van afval:
De volgende informatie geldt enkel in EU-lidstaten:
Het symbool met de doorkruiste afvalbak geeft aan dat dit product niet mag worden behandeld als algemeen
huishoudelijk af val.
Door dit product op de juiste manier van de hand te doen beschermt u het milieu en de volksgezondheid tegen mogelijke
negatieve gevolgen, die anders zouden kunnen voortvloeien uit het onjuist verwerken van de resten van dit product.
Voor gedetailleerde informatie over het terugnemen en recycleren van dit product, gelieve contact op te nemen met de
leverancier van dit product.
Italian
Informazioni sul riciclo del prodotto:
Le seguenti informazioni riguardano gli stati membri EU:
Il simbolo con il bidone sbarrato indica il non poter smaltire questo prodotto come rifiuto domestico.
L'accertamento che questo prodotto sia smaltito correttamente contribuirà ad impedire le potenziali conseguenze
negative per l'ambiente e la salute umana che potrebbero essere causati, al contrario, dall'errato smaltimento dello
stesso. Per informazioni più dettagliate sulle modalita di resa e riciclaggio di questo prodotto mettetevi in contatto con il
fornitore da cui l'avete aquistato.
Portuguese
Informação sobre reciclagem:
A informação que se segue é apenas dirigida a países membros da CEE:
A utilização deste símbolo indica que este produto não pode ser tratado como lixo comum.
Ao assegurar-se que este produto é tratado correctamente está a ajudar a prevenir potenciais consequências negativas
para o ambiente e para a saúde humana, que poderiam ser causadas pelo inapropriado tratamento deste produto.
Para mais informação sobre a reciclagem e tratamento deste produto, contacte o seu fornecedor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Summary
EO1-12030
Safety Summary
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions
necessary for safe handling are included in this manual. All warnings and cautions contained in this manual
should be read and understood before handling or maintaining the equipment.
Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified
using the procedures described in this manual, turn off the power, unplug the machine, then contact your
authorized TOSHIBA TEC representative for assistance.
Meanings of Each Symbol
This symbol indicates warning items (including cautions).
Specific warning contents are drawn inside the symbol.
(The symbol on the left indicates a general caution.)
This symbol indicates prohibited actions (prohibited items).
Specific prohibited contents are drawn inside or near the symbol.
(The symbol on the left indicates “no disassembling”.)
This symbol indicates actions which must be performed.
Specific instructions are drawn inside or near the symbol.
(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)
This indicates that there is the risk of death or serious injury if the
machines are improperly handled contrary to this indication.
WARNING
Do not plug in or unplug the
power cord plug with wet
hands as this may cause
electric shock.
Do not use voltages other than the
voltage (AC) specified on the
rating plate, as this may cause fire
or electric shock.
Any other than the
specified AC voltage is
prohibited.
Prohibited
Prohibited
If the machines share the same
outlet with any other electrical
appliances that consume large
amounts of power, the voltage
will fluctuate widely each time
these appliances operate. Be
sure to provide an exclusive
outlet for the machine as this
may cause fire or electric
shock.
Do not place metal objects or
water-filled containers such as
flower vases, flower pots or mugs,
etc. on top of the machines. If
metal objects or spilled liquid enter
the machines, this may cause fire
or electric shock.
Prohibited
Do not insert or drop metal,
flammable or other foreign
objects into the machines
through the ventilation slits, as
this may cause fire or electric
shock.
Do not scratch, damage or modify
the power cords. Also, do not
place heavy objects on, pull on, or
excessively bend the cords, as this
may cause fire or electric shock.
Prohibited
Prohibited
If the machines are dropped or
their cabinets damaged, first
turn off the power switches and
disconnect the power cord
plugs from the outlet, and then
contact your authorized
TOSHIBA TEC representative
for assistance. Continued use
of the machine in that condition
may cause fire or electric
shock.
Continued use of the machines in
an abnormal condition such as
when the machines are producing
smoke or strange smells may cause
fire or electric shock. In these
cases, immediately turn off the
power switches and disconnect the
power cord plugs from the outlet.
Then, contact your authorized
TOSHIBA TEC representative for
assistance.
Disconnect
the plug.
Disconnect
the plug.
(i)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Summary
EO1-12030
If foreign objects (metal
When unplugging the power cords,
be sure to hold and pull on the plug
portion. Pulling on the cord portion
may cut or expose the internal wires
and cause fire or electric shock.
Disconnect
the plug.
Disconnect
fragments, water, liquids) enter
the machines, first turn off the
power switches and disconnect
the power cord plugs from the
outlet, and then contact your
authorized TOSHIBA TEC
representative for assistance.
Continued use of the machine in
that condition may cause fire or
electric shock.
the plug.
Ensure that the equipment is
properly grounded. Extension
cables should also be grounded.
Fire or electric shock could
occur on improperly grounded
equipment.
Do not remove covers, repair or
modify the machine by yourself.
You may be injured by high
voltage, very hot parts or sharp
edges inside the machine.
Unauthorized modification is
prohibited.
Connect a
No
disassembling.
grounding wire.
This indicates that there is the risk of personal Injury or damage to objects if
the machines are improperly handled contrary to this indication.
CAUTION
Precautions
The following precautions will help to ensure that this machine will continue to function correctly.
Try to avoid locations that have the following adverse conditions:
* Temperatures out of the specification
* Shared power source
* Direct sunlight
* High humidity
* Dust/Gas
* Excessive vibration
Do not subject the machine to sudden shocks.
Do not press the keys too hard. Keys will operate correctly if they are touched lightly.
Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and
wrung out thoroughly. Never use thinner or other volatile solvent for cleaning.
At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine.
Try to avoid using this equipment on the same power supply as high voltage equipment or equipment
likely to cause mains interference.
USE ONLY TOSHIBA TEC SPECIFIED consumables.
DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high
humidity, dust, or gas.
When moving the machine, take hold of the drawer and lift the machine.
Do not place heavy objects on top of the machines, as these items may become unbalanced and fall
causing injury.
Do not block the ventilation slits of the machines, as this will cause heat to build up inside the
machines and may cause fire.
Do not lean against the machine. It may fall on you and could cause injury.
Place the machine on a stable and level surface.
Request Regarding Maintenance
Utilize our maintenance services.
After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistancii
once a year to have the inside of the machine cleaned. Otherwise, dust will build up inside the
machines and may cause a fire or a malfunction. Cleaning is particularly effective before humid rainy
seasons.
Our preventive maintenance service performs the periodic checks and other work required to maintain
the quality and performance of the machines, preventing accidents beforehand.
For details, please consult your authorized TOSHIBA TEC representative for assistance.
Using insecticides and other chemicals
Do not expose the machines to insecticides or other volatile solvents. This will cause the cabinet or
other parts to deteriorate or cause the paint to peel.
(ii)
Download from Www.Somanuals.com. All Manuals Search And Download.
EO1-12030
TABLE OF CONTENTS
Page
1. INTRODUCTION----------------------------------------------------------------------------------------1- 1
1.1 Accessories--------------------------------------------------------------------------------------------------1- 1
2. APPEARANCE------------------------------------------------------------------------------------------2- 1
3. CONNECTORS -----------------------------------------------------------------------------------------3- 1
4. INSTALLATION PROCEDURE---------------------------------------------------------------------4- 1
4.1
4.2
Environment for Installation----------------------------------------------------------------------------4- 1
Attaching the Cable Cover-----------------------------------------------------------------------------4- 1
5. HOW TO LOCK/UNLOCK THE FRONT PANEL-----------------------------------------------5- 1
6. GENERAL MAINTENANCE -------------------------------------------------------------------------6- 1
6.1 Cleaning ------------------------------------------------------------------------------------------------------6- 1
7. TROUBLESHOOTING --------------------------------------------------------------------------------7- 1
8. SPECIFICATIONS -------------------------------------------------------------------------------------8- 1
8.1 Basic Specifications ---------------------------------------------------------------------------------------8- 1
8.2 Options--------------------------------------------------------------------------------------------------------8- 2
CAUTION!
1. This manual may not be copied in whole or in part without prior written permission of
TOSHIBA TEC.
2. The contents of this manual may be changed without notification.
3. Please refer to your local Authorised Service representative with regard to any queries you
may have in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. INTRODUCTION
EO1-12030
1.1 Accessories
1. INTRODUCTION
Thank you for choosing the TOSHIBA POS Terminal. This POS Terminal contains all the high
performance register function necessary for a POS Terminal and enables the user oriented system
configuration. By adopting a high-speed CPU, Memory with large capacity, this POS Terminal flexibly
accepts the modification corresponding to the future system environment as the user expects.
This manual describes the functions and handling of this POS terminal and should be read carefully to
help gain maximum performance and life from your POS terminal. For most queries please refer to
this manual and keep it safe for future reference.
1.1 Accessories#
Confirm that all the following accessories are contained in the carton. If any accessories are missing
or damaged, contact your TOSHIBA TEC service representative.
Cable Cover (1 pc.)
Front Panel Key (2 pcs.)
Cable Clamp (2 pcs.)
(Used to secure the USB Cable, etc.
to the POS terminal)
#
#
#
Ferrite Core (2 pcs.)
Ferrite Core (1 pc.)
Ferrite Core (2 pcs.)
(For the Drawer Cable)
(For the Audio Cable)
(For the TFT Monitor Cable)
#
#
#
Bind Unify Screw
N0.6x4.5 (8 pcs.)
Double Sems Screw
M-3x8 (2 pcs.)
(Used to secure the HDDs)
(Used to secure the Cable Clamp)
#
#
NOTE: The power cord is not included in the carton. Please prepare it separately from a local dealer.
1- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. APPEARANCE
EO1-12030
2. APPEARANCE
2. APPEARANCE
< Front View >
Front Panel Lock
Front Panel
Power LED
HDD LED
POWER LED
HDD LED
Cover Catch
Reset Switch
Volume
CD-RW Drive
(Option)
Power Switch
USB5 Connector
(1) Power Switch
This is the switch to turn the power of the POS terminal ON or OFF. The Power LED is illuminated
when turning the power on.
(2) Power LED (Green)
This is the LED to indicate the power ON/OFF status of the POS terminal. Green LED is
illuminated when turning the power ON.
(3) HDD LED (Yellow)
This is the LED for a model with the Hard Disk Drive installed. Yellow LED is illuminated during
the access to the Hard Disk Drive.
(4) Front Panel Lock
This is the lock of the front panel. To lock the front panel, insert the front panel key to the front
panel lock, then turn it clockwise. To unlock the front panel, turn the front panel key
counterclockwise.
(5) Reset Switch
Pressing this switch when the POS terminal hangs up resets the unit.
CAUTION!
Do not press the Reset Switch unnecessarily. Doing so may cause an error.#
(6) Volume
Used to adjust the internal speaker volume.
When it is turned to left, the sound volume turns down.
When it is turned to right, the sound volume turns up.
(7) USB5 Connector
Connector for the USB (Universal Serial Bus) interface conforming to USB V2.0/1.1. A USB
Mouse, USB keyboard, etc. can be connected to this connector.
2- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. CONNECTORS
EO1-12030
3. CONNECTORS
3. CONNECTORS
LINE OUT
(Option)
#
24V Power
for Printer
Powered USB (24V)
(Option)
COM5
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
(Option)#
COM6
(Option)
Powered USB (12V)
(Option)
MIC (Option)
LPT1
COM3
VGA
DRW1
DRW2
PS/2 K/B
COM2
COM1
LAN
COM4
Connector
AC Inlet
AC Outlet
Description
A connector for the AC inlet
A connector to supply AC power to the CRT.
AC power is output in synchronization with the ON/OFF status of the POS terminal.
A terminal of a DC24V line to which the power cable of the Receipt/Journal printer is
connected.
P24V DC Outlet
PS/2 (Keyboard)
Mini-DIN 6-pin female type connector.
Connector for the PS/2 type keyboard.
USB0, 1, 2, 3 (Powered
USB) (Option)
Connector for the USB (Universal Serial Bus) interface USB V2.0/1.1 and UHCI
(conforming to Universal Hub Controller Interface V2.0/1.1)
NOTE: USB functions may not be supported depending on the Operating System.
USB0 to USB3 are powered USB sockets, which are 3 ports of 12V USB (USB0 to
USB2) and 1 port of 24V USB (USB3). The lower part of these sockets can be used
as general 5V USB connectors.
LAN
DRW1, DRW2
VGA
Modular type connector for the 10BASE-T/100BASE-TX LAN interface
A 24V type drawer is connectable.
A 15-pin VGA connector to the CRT
COM1, 2
D-sub 9-pin male type connector (without power supply)
A slot scanner, modem, serial Interface type scale, EFT, etc. are connectable.
D-sub 9-pin female type connector (with +5V, +12V output)
A line display unit or RS-232C type hand scanner is connectable.
NOTES:
COM3, 4, 5, 6
(COM5, 6: Option)
1 COM6 cannot be used when the touch panel TFT is connected to the POS terminal.
2. COM6 is available only when the optional kit is installed.
D-sub 25-pin female connector
LPT1
Printer, etc. having a Centronics interface or equivalent are connectable.
Used for connecting an external speaker via the stereo mini jack terminal
Used for connecting a monophonic microphone via the mono mini jack terminal
Line-out (Option)
Mic-in (Option)
*: COM6 is installed on the PCI slot.
3- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
4. INSTALLATION PROCEDURE
EO1-12030
4.1 Environment for Installation
4. INSTALLATION PROCEDURE
4.1 Environment for Installation
1. Provide a space of minimum 80 mm to the left, right, front, rear, and top of the main unit for proper
cooling. (The main unit has air vents on the front, rear, right and left, and a fan. Spaces should be
provided to prevent the air vents in the main unit from being closed and the air flow from being
obstructed.)
2. Attaching the cable cover:
The cable cover must be attached to protect the interface cables or connectors. Be sure to turn off
the power before connecting or disconnecting the cables.
3. Notes on installing the display unit on the top of the enclosure:
When installing the display unit on the top of the enclosure, the following conditions must be
satisfied. (Except for the standard display unit)
1) Display unit weighing 12Kg or under
2) The base of the display unit has no projections that might damage the enclosure.
3) The base of the display unit does not protrude beyond the steel plate at the top of the main
unit.
4.2 Attaching the Cable Cover
1. Insert the guides on both sides of the cable cover into the slits provided on the POS terminal, then
slide down the cable cover to the bottom.
NOTE: Be sure to attach the cable cover for protecting the cables.
Guide
Slit
Cable Cover
2. When detaching the cable cover, hold both sides by hands, then pull it up.
4- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
5. HOW TO LOCK/UNLOCK THE FRONT PANEL
EO1-12030
5. HOW TO LOCK/UNLOCK THE FRONT PANEL
5. HOW TO LOCK/UNLOCK THE FRONT PANEL
<< How to unlock the front panel >>
Front Panel Lock
Front Panel
#
1. Insert the front panel key into the front panel lock, and turn it counterclockwise to unlock the front
panel.
2. Push the upper center of the front panel until it clicks.
3. Gently open the front panel holding it by hand.
<< How to lock the front panel >>
Front Panel Lock
Front Panel
#
1. Gently close the front panel.
2. Push the upper center of the front panel until it clicks.
3. Turn the front panel key clockwise to lock the front panel.
5- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
6. GENERAL MAINTENANCE
EO1-12030
6.1 Cleaning
6. GENERAL MAINTENANCE
6.1 Cleaning#
WARNING!
1. Be sure to disconnect the power cord prior to performing any maintenance.
2. Do not pour water directly on the POS Terminal or wipe it with a soaked cloth, as this may cause
fire, electric shock, or machine failure.
CAUTION!
Never use an organic solvent like thinners or benzene for cleaning. Using such solvents may
discolor the covers.
To help retain the high quality and performance of your POS Terminal, it should be cleaned regularly.
The greater the usage on the POS Terminal, the more frequent the cleaning. (i.e. low usage = weekly:
high usage = daily)
• Cleaning the Covers
Wipe the covers with a soft dry cloth or soft cloth slightly moistened with mild detergent. After using
detergent for cleaning, be sure to wipe it off with a slightly moistened cloth.
6- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TROUBLESHOOTING
EO1-12030
7. TROUBLESHOOTING
7. TROUBLESHOOTING
WARNING!
If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself.
Turn the power off, unplug the POS Terminal, then contact the nearest TOSHIBA TEC service
representative for assistance.
Symptom
Check point
Solution
The power does not
turn on.
•
•
Is the power cord plugged in correctly?
Is the power supplied to the AC outlet?
• Plug in correctly.
• If it is not a power failure,
check for the power supply
to the AC outlet with another
electric appliance.
When the power is not
supplied, contact your
nearest power company.
• Check the circuit breaker.
•
Has the circuit breaker blown?
7- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
8. SPECIFICATIONS
EO1-12030
8.1 Basic Specifications
8. SPECIFICATIONS
8.1 Basic Specifications
Item
Description
Input voltage
AC 100V-240V +10%, -10% 50/60Hz 4.8A-2.3A
DC24V +5%, -5%
DC output voltage
AC output voltage
Operating temperature
Relative humidity
Dimensions
AC 100V-240V +10%, -10% 50/60Hz 2.0A-1.0A
5°C to 35°C
10% to 80%RH (no condensation)
315 mm (W) x 466 mm (D) x 112.5 mm (including the rubber feed and
cable cover)
Weight
9.5 Kg (without 2 HDDs, CD, UPS battery, PCI, and packing materials)
Power cord
A power cord is not included in this product. Please use one complied
with each country’s safety standard. For details, please contact the
nearest TOSHIBA TEC service representative.
CPU
Intel Celeron 1.2 GHz with 256 KB secondary cache
1MB Flash ROM
BIOS ROM
RAM
Capacity Standard 128MB (Max. 2GB)
Max. 1GB/slot can be equipped.
Type
DDR SDRAM PC2100, 2.5V unbuffered type, non ECC 184-pin DDR
SDRAM DIMM connector, 2 slots installed
Interface
RS-232C x 4, Parallel x 1, USB x 1, Drawer x 2 (24V type), PS/2 x 1,
PCI (Half size slot) x 2, +24V OUT (DIN 3-pin) x 1
Display interface
RGB x 1 channel (on-board, standard)
Hard Disk Drive (HDD)
CD-RW drive
Max. 2 units of 3.5-inch HDD (option) can be connected.
1 drive (local purchase is required),
CD connection kit required (option)
LAN interface
10 BASE-T, 100 BASE-TX (Wake on LAN support)
USB interface type (local purchase is required.)
Windows 2000, Windows XP, DOS
Floppy Disk Drive (FDD)
Support OS
8- 1
Download from Www.Somanuals.com. All Manuals Search And Download.
8. SPECIFICATIONS
EO1-12030
8.2 Options
8.2 Options
Option name
Type
Description
Drawer unit
DRWST-51A-4MV-QM
DRWST-51A-8MV-QM
24V-drive standard drawer
Size and Weight: 460(W) x 400(D) x 115(H) mm, 10Kg
Money Case Type: MC4,8
DRWST-56-EMV-QM
24V-drive flip top drawer
Size and Weight: 460(W) x 170(D) x 100(H) mm, 6Kg
Money Case Type: EURO case
Drawer type
Type
4MV-QM
8MV-QM
EMV-QM
Bill holder Coin tray Mini coin case CDC
Remarks
With media slot
5
4
5
5
6
8
No
1
Yes
Yes
Yes
With media slot
With media slot
No
Line display unit LIUST-51-1AF-QM
20 characters x 2 lines dot display
Printer Unit
TRST-56-P-1W-QM
Parallel interface single thermal printer for 80 mm wide paper
Cabinet color: FW-2
TRST-56-S-1W-QM
Serial interface single thermal printer for 80 mm wide paper
Cabinet color: FW-2
TRJST-52-3S-QM
TRJST-52-3P-QM
Serial interface 2-station thermal printer for 58-mm wide paper
Parallel interface 2-station thermal printer for 58-mm wide paper
81 keys POS keyboard with PS/2 interface
POS keyboard PKBST-50-3-QM
unit
TFT monitor
TFTST-56T-3V-QM
12.1-inch TFT monitor equipped with the touch panel
(with VGA board)
Operation Unit LKBST-65 TT11-QM
12.1-inch TFT monitor equipped with the 40 keys keyboard
(The magnetic card reader is provided as an option.)
Mounting kit
KIT-7000-COM-QM-R
KIT-7000-CD-QM-R
KIT-7000-CBL-QM-R
COM6 connector kit for attaching the PCI slot
Mounting kit for attaching the CD drive
COM relay cable kit for connecting the option TFT monitor
(TFTST-56T) or the operation unit (LKBST-65) to the ST-7000.
KIT-7000-2COM-QM-R
KIT-7000-PUSB-QM-R
Expansion I/O PC board that contains two COM ports and a
powered USB port (24V).
Expansion I/O PC board that contains two COM ports, four
powered USB ports (12V x 3 and 24V x 1), a MICIN, and a
LINEOUT.
NOTE: Model name with an “R” attached to the end indicates that the product complies with RoHS
directive.
8- 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTED IN JAPAN
EO1-12030
E
Download from Www.Somanuals.com. All Manuals Search And Download.
|