NETWORK CAMERA
Model: IK-WR05A
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
Refer to the user's manual (PDF file) contained in the CD-ROM for settings, operations
and other information.
The application Adobe® Reader® is needed to view PDF files. If you do not have this
application, download it from the Adobe Systems Incorporated website.
n
For information on our latest products and peripheral devices, refer to the following
Website:
n
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
1
2014/1/24 下午 04:26:47
Thank you for purchasing the IK-WR05A Network Camera. Before using the
camera, read this quick start guide carefully to ensure correct usage. After reading
this quick start guide, save it for future reference.
The design, specifications, software, and quick start guide contents are subject to
change without prior notice.
Terms
The term "OS" is used in this manual to indicate operating systems compatible
l
with this product.
-- Microsoft® Windows Vista® Business Edition
Microsoft® Windows® 7 Professional Edition
--
NOTE
The performance of the network camera may vary depending on the network
l
environment.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
3
2014/1/24 下午 04:26:47
Table of Contents
Introduction....................................................................................................... 2
FCC (USA)-INFORMATION.......................................................................................2
Terms ........................................................................................................................3
Table of Contents.............................................................................................. 4
Important Safeguards....................................................................................... 5
Important Safeguards (Cont.)........................................................................... 7
Notes on Use and Installation........................................................................... 8
Setting the Network Camera Environment....................................................... 9
Items needed for network camera monitoring...........................................................9
Package Contents.......................................................................................... 10
Physical Description .......................................................................................11
Hardware Installation ..................................................................................... 12
Network Deployment ..................................................................................... 16
Assigning IP Address...................................................................................... 18
Retrieving Images........................................................................................... 19
Adjusting the Lens.......................................................................................... 20
Completion ..................................................................................................... 21
Trademarks .................................................................................................... 22
Note................................................................................................................ 23
4
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
4
2014/1/24 下午 04:26:47
Important Safeguards
1. Read Instructions
Read all the safety and operating instructions before operating the product.
2. Retain Instructions
Retain the safety instructions and user's manual for future reference.
3. Warnings
Comply with all warnings on the product and in the user's manual.
4. Follow Instructions
Follow all operating and use instructions.
5. Cleaning
Disconnect this camera from the power supply before cleaning.
6. Attachments
Do not use attachments not recommended by the camera manufacturer as they may pose
safety risks.
7. Accessories
Do not place this camera on an unstable cart, stand, tripod, bracket or table. The camera
may fall, causing serious injury to a person, or serious damage to the product. Use only
with stand, tripod,bracket,or table recommended by the manufacturer, or sold with the
camera. Any mounting of the product should follow the manufacturer's instructions, and
should use a mounting accessory recommended by the manufacturer.
8. Ventilation
This camera should never be placed near or over a radiator or heat register. If this product
is placed in a built-in installation, verify that there is proper ventilation so that the camera
temperature operates within the recommended temperature range.
9. Power Sources
This camera should be operated only from the type of power source indicated on the
information label. If you are not sure of the type of power supply at your location, consult
your product dealer.
10. Power-Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular attention to cords at plugs, screws and
the point where they exit the product.
11. Installation
Install this camera on a secure part of the ceiling or wall. If installed on an unsecured
location, the camera could fall causing injury and damage.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
5
2014/1/24 下午 04:26:47
12. Lightning
For additional protection on this camera during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the power supply and cable system. This will prevent damage to the camera
due to lightning and power-line surges. If lightning occurs, do not touch the unit or any
connected cables in order to avoid electric shock.
13. Overloading
Do not overload the power supply or extension cords as this can result in a risk of fire or
electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may touch
dangerous electrical points or short-out parts that could result in a fire or electrical shock.
Never intentionally spill liquid of any kind on the camera.
15. Servicing
Do not attempt to service this camera yourself as opening or removing covers may expose
you to dangerous electrical or other hazards. Refer all servicing to qualified service
personnel.
16. Damage Requiring Service
Disconnect this camera from the power supply and refer servicing to qualified service
personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the camera.
c. If the camera has been submerged in water.
d. If the camera does not operate normally by following the operating instructions in the
user's manual. Adjust only those controls that are covered by the user's manual as
an improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f. When the camera exhibiting a distinct change in performance which indicates a need for
service.
g. Other trouble.
17. Replacement Parts
When replacing parts, be sure the service technician uses parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repairs to this camera, ask the service technician to
perform safety checks to determine that the camera is in proper operating condition.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
6
2014/1/24 下午 04:26:47
Important Safeguards (Cont.)
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT SUBMERGE
THIS CAMERA IN WATER.
FIELD INSTALLATION MARKING:
WORDED: “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”
This product is intended to be supplied by a Listed Power Adapter with LPS, rated
12V DC,0.37A minimum or 48V DC, 0.11A(for POE) minimum.
The product is not likely to require connection to an Ethernet network with outside
plant routing, including campus environment; and the installation instructions clearly
state that the ITE is to be connected only to PoE networks without routing to the
outside plant.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
7
2014/1/24 下午 04:26:47
Notes on Use and Installation
Do not aim the camera at the sun
l
Never aim the camera at the sun even with the camera power off.
Do not shoot intense light
l
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe
may appear on the screen. However, this is not a malfunction.
Treat the camera with care
l
Dropping or subjecting the camera to intense vibration may cause it to
malfunction.
Never touch internal parts
l
l
Do not touch the internal parts of the camera other than the parts specified.
Do not submerge in water
The camera has some protection to water (see IP rating), and can be used
indoors or outdoors. If the camera was submerged in water, turn off the power
and contact your dealer.
Keep the camera installation away from video noise
l
l
If cables are wired near electric lighting wires or a TV set, noise may appear in
images. In this event relocate cables or reinstall equipment.
Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than the
specified operating range. Doing so could affect the internal parts or cause the
image quality to deteriorate. Special care is required to use the camera at high
temperature and humidity.
Should you notice any trouble
l
If any trouble occurs while you are using the camera, turn off the power and
contact your dealer. If you continue to use the camera when there is something
wrong with it, the trouble may get worse and an unpredictable problem may
occur.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
8
2014/1/24 下午 04:26:47
Setting the Network Camera Environment
Items needed for network camera monitoring
Administrator's personal computer
l
The personal computer that allows setting, operating, monitoring and other
functions with the network camera is called the "administrator's personal
computer" in this guide.
* The personal computer for viewing monitored images is called the "user's
personal computer" in this quick start guide. The network camera can be
viewed by more than one personal computer at the same time.
Recommended personal computer system requirements:
-- Windows Vista® Business, or Windows® 7 professional.
-- Internet Explorer® Ver 8.0
l
-- CPU: Intel® CoreTM 2 Duo 2GHz or greater
-- Memory: 1GB RAM or greater
Connection equipment such as LAN cables, and switch or router.
-- The LAN cable type differs depending on the connection method.
Camera search application "Installation Wizard"
l
l
-- Install this application from the CD-ROM supplied as an accessory (Double-click
"Setup.exe" in the CD-ROM and install the application by following the onscreen
instructions.)
-- This application is the tool to discover the IP address of a camera. Using this
application, the IP address of a camera can be easily determined.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd
9
2014/1/24 下午 04:26:47
Package Contents
IK-WR05A
Video Out Cable
l
l
CD-ROM
Alignment Sticker
l
l
IK-WR05A
Ver. WR05-01
Warranty Card
Quick Start Guide and Important
Safeguards
l
l
Clamp Filter and Screw Driver
Silica Gel and tape, Screws and
Anchors, RJ45 Female / Female
Coupler
l
l
10
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 10
2014/1/24 下午 04:26:48
Physical Description
General I/O Terminal Block
Pin
+
-
Name
Digital Input
GND
Black Cover
IR-LED
General I/O Terminal Block
Lens
10/100BaseT Ethernet
RJ45 Plug
Light sensor
Lens cover
Power Cord Socket
Reset Button
Status LED
MicroSD/SDHC Card Slot
Video Out
Connector (2 pins)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 11
2014/1/24 下午 04:26:48
Hardware Installation
First, follow the instructions below to remove the dome cover.
Clear cover
Dome cover
Record the MAC address before
installing the camera.
Then remove the black cover as shown below.
Tilt Adjustment Screws
Lens Cover
Mounting hole
Mounting hole
NOTE
Protection film is placed on the lens at the factory. In order to protect the lens,
do not remove until lens adjustment is completed.
(Refer to “completion” on page 21.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 12
2014/1/24 下午 04:26:50
Install the supplied clamp filter onto the cable to prevent EMI radiation.
The clamp filter should be installed
between the camera and cable tie
as shown.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 13
2014/1/24 下午 04:26:50
Ceiling Mount
Ceiling and Wall mount
Notes:
Wall Mount
l The included screws and anchors are used to install the camera to a
solid surface. (e.g. concrete) If installing on loose or thin material
surfaces , use the appropriate anchors (not included) with the screws.
l If possible, point the TOSHIBA logo towards the field of view.
The adjustment range of PAN is indicated on the alignment sticker.
l When installing the camera to the wall, don’t turn the lens cover,
and make sure the light sensor location as shown. (Refer to “Adjusting
the Lens” on page 20.)
l Install the camera securely.
l Use Category (Cat) 5 or higher cable.
1. Attach the supplied alignment sticker to the ceiling or wall.
2. Drill three pilot holes (Ø0.19inch×1.02inches(D)
(Ø4.8mm×26mm(D))) through the three circles on the sticker.
Then hammer the three supplied plastic anchors into the holes.
3. Drill a cable hole A(Ø1.1inch (Ø28mm)) as shown in the above picture, and lead the
cables through this hole.
4. Align the three mounting holes of the Camera with the three plastic anchors; insert the
included three screws to the corresponding holes and tighten them with a driver securely.
Cable installation
If possible, lead all cables behind the camera body through a wall or ceiling.
If this is not possible, route it through the side.
CAUTION:
If the cable is routed outdoors, ensure UL certificated tube is used to protect the cable.
Operating environment
-20 oC ~ +50 oC {-4 oF ~ 122 oF}
When the camera is installed and operated in low temperatures below -10 oC{14 oF}, normal
images may not be obtained immediately after startup. In such a case, wait until the camera
warms up (taking more than 1 hour) and start adjustment after turning on the power again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 14
2014/1/24 下午 04:26:51
CAUTION
Installation should be done only by qualified personnel and conform to all local codes.
l
l
Install this camera on a firm and solid part of the ceiling or wall.
If installed improperly or on a weak surface, the camera could fall causing injury and
damage.
Ithough the camera and the cable on the camera's end are waterproof, the
l A
cable molding at the other end is not waterproof.
Measures should be taken to prevent water from leaking in through the cable-end
molding, such as the use of expanding foam sealant, putties, and so on.
Note that the cable on the camera should also be securely fastened to attain its
waterproof functionality.
Waterproof
Not Waterproof
Cable Molding
15
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 15
2014/1/24 下午 04:26:51
Network Deployment
Power over Ethernet (PoE)
l
When using a PoE-enabled switch
The camera is PoE-compliant, allowing transmission of power and data via single LAN
cable. See the following illustration to connect the camera to a PoE switch via LAN
cable.
PoE switch
(not supplied)
LIN
K
RE
AR
T
PO
W
ER
C
O
L
L
ISIO
N
C
EIV
E
IT
IO
N
1
P
2
3
4
5
Client PC
(not supplied)
l
When using a non-PoE switch
Use a PoE power injector (not supplied) to connect between the camera and a non-PoE
switch.
PoE power injector
(not supplied)
R
T
T
non-PoE switch
(not supplied)
Client PC
(not supplied)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 16
2014/1/24 下午 04:26:53
General Connection (without PoE)
1. Connect the camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the power socket.
3. Connect the PC to an Ethernet switch via Ethernet cable.
Ethernet switch
(not supplied)
LIN
K
RE
AR
T
PO
W
ER
C
O
L
L
ISIO
N
C
EIV
E
IT
IO
N
1
P
2
3
4
5
1
2
3
Client PC
(not supplied)
NOTE
The recommended power supply for this camera is 6 watts minimum.
l
l When PoE is connected, don't supply 12V DC.
l Spec of DC plug is mentioned below.
Unit : mm
17
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 17
2014/1/24 下午 04:26:54
Assigning IP Address
1. Install the "Installation Wizard" under the Software Utility directory from the CD-
ROM.
2. The program will analyze your network environment. After your network is
analyzed, please click on the "Next" button to continue the program.
Installation
Wizard
3. The program searches for other Network Cameras on the same network.
4. After searching, the main installer window will pop up. Double click on the MAC
address of the appropriate device to connect to the Network Camera.
00-02-D1-71-42-70
169.254.0.99
IK-WR05A
0002D1714270
NOTE
If "Installation Wizard" does not find the camera during the search, try turning off the
wireless LAN of a PC.
l
l
Installation Wizard can search the location of the Network Camera even though
DHCP is not used on the network. In this scenario, assign the camera a static
IP address because the IP address of the Network Camera has been assigned
169.254.*.* by default.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 18
2014/1/24 下午 04:26:54
Retrieving Images
1. Access the Network Camera from the network.
2. Retrieve live video through Internet Explorer®.
For more information on camera configuration, please refer to user's
manual on the CD-ROM.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 19
2014/1/24 下午 04:26:54
Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by
performing the following:
Using an analog monitor
This camera is able to output an analog NTSC video signal from the Video Out
connector.
Adjustment of Viewing angle is possible using a portable monitor without using a
personal computer when installing.
Use the included Video Out cable for this purpose.
To adjust the viewing angle
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Turn the lens cover to adjust the image orientation. (Ceiling mount)
Loosen
Tighten
1
2
3
Pan 350°
NOTE
Wall mounting
Tilt: 55°
Rotate 340°
This camera is adjusted to the optimal position for ceiling mounting by default.
When installing to the wall, don't turn a lens cover 180 degrees.
And change the following setup of the camera.
Video>Image>General setting>Video orientation:
Lens Focus
l This camera is using the deep focus lens. This camera comes into focus from 1.5m to
infinite distance. No need to readjust the focus.
l The surrounding part of image is a bit out of focus if compared to the central part, due to
the lens spec. It is not failure.
l There may be a difference of focus if compared to the left, right, top and bottom of image. It
is not failure.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 20
2014/1/24 下午 04:26:55
Completion
1. Align the inner side of the black cover with the notches on both sides of the lens, fix
the black cover.
The black cover cannot be attached if installed in the wrong orientation.
Note:
2. You will find a silica gel bag attached to the camera.
Replace this old silica gel with a new silica gel. The new silica gel is supplied in the
aluminum foil bag. Remove it from the foil bag before installing.
(Please replace the silica gel with a new one if you open the dome cover after
installation.)
3. Attach the dome cover to the camera as shown below. The dome cover cannot be
attatched if installed in the wrong orientation. Align the side cover (or side cutout)
with where the cable comes out from the camera. Push the dome cover to join with
the camera.
Don't touch the lens and clear cover when installing. Before attaching the
Note:
dome cover , remove the protection film on the lens. Clean the clear cover if
you touch it. After attaching the dome cover, make sure not to cover the light
sensor with dome cover.
4. Secure the three dome screws with the supplied screw driver. Make sure all parts of
the camera are securely installed.
3
2
1
Dome cover
Clear cover
Be aware of the cable route!
4
The supplied screw driver is exclusively designed to match the dome screws. Do not
discard the screw driver.
Treat silica gel bag with care. Do not tear the silica gel packge.
WARNING:
Keep the silica gel out of the reach of babies, infants, and children.
DO NOT EAT, HARMFUL IF SWALLOWED
21
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 21
2014/1/24 下午 04:26:56
Trademarks
Microsoft, Windows, Windows Vista and Intemet Explorer are trademarks or
registered trademarks of Microsoft Corporation in the United States and other
countries.
l
l Intel and Intel Core are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries.
Adobe and Reader are either registered trademarks or trademarks of Adobe
l
Systems Incorporated in the United States and/or other countries.
Other product names appearing in this quick start guide may be trademarks or
l
registered trademarks of their respective holders.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 22
2014/1/24 下午 04:26:56
Note
23
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 23
2014/1/24 下午 04:26:56
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Surveillance & IP Video Products
9740 Irvine Boulevard,
Irvine, CA 92618-1697
Phone Number: (877) 855-1349
625023400G
Download from Www.Somanuals.com. All Manuals Search And Download.
625023400G_QIG,FD8161V-TOBA,V1.00_20140124.indd 24
2014/1/24 下午 04:26:56
|