Toshiba Scale SL 4700 User Manual

TEC Electronic Computing Scale  
SL-4700 SERIES  
Owner's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
Manufacturer  
Type  
TOSHIBA TEC  
SL-4700  
No. of EC type approval  
certificate  
T5982  
Corresponds to the requirements of the following EC directives:  
Non-Automatic Weighing  
Instruments  
Directive 90/384/EEC 1  
EMC Directive  
EMC 89/336/EEC  
LVD 73/23/EEC  
Low Voltage Directive  
The applicable harmonised  
standards are:  
EN 45 501  
EN50 081-1  
EN 60 950  
EMC Compliance  
This is a class A product. In a domestic environment, this product may  
cause radio interference in which case the user may be required to  
take adequate measures.  
Note 1: This declaration is only valid if the non-automatic weighing  
instrument was verified by the manufacturer or with a certificate of  
conformity issued by a notified body.  
Copyright © 2003  
By TOSHIBA TEC CORPORATION  
All Rights Reserved  
570 Ohito, Ohito-cho, Tagata-gun, Shizuoka-ken, JAPAN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
page no.  
1
2
3
4
5
6
7
Warnings  
8
Specifications  
Installation  
10  
15  
16  
18  
22  
Error Messages  
Using the Scale  
Management Mode  
Before you call for service  
CAUTION:  
1. This manual may not be copied in whole or in part without prior  
written permission of TOSHIBA TEC.  
2. The contents of this manual may be changed without  
notification.  
3. Please refer to your local Authorised Service representative  
with regard to queries you may have in this manual.  
SL-4700 Owner Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Warnings  
1
Warnings  
For your protection, all mains (110V or 230V) equipment used  
where damp or wet conditions may occur, must be supplied  
from a correctly fused source and protected by an approved  
RCD to BS7071 or BS7288 or IEC1008-2-2 BS EN  
61008:1995. IF IN DOUBT SEEK ADVICE FROM A  
QUALIFIED ELECTRICIAN.  
To avoid the possibility of electric shock or damage to the  
machine, always isolate from the mains power supply before  
carrying out any routine maintenance.  
Cleaning the scale  
Harsh abrasives, solvents, scouring cleaners and alkaline  
cleaning solutions, such as washing soda, should not be used  
especially on the display windows. Under no circumstances  
should you attempt to wipe the inside of the machine.  
The outside of the machine may be wiped down with a clean  
cloth moistened with water containing a small amount of  
washing up liquid.  
SL-4700 Owner Manual  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1 Warnings  
Safety Summary  
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions  
necessary for safe handling are included in this manual. All warnings and cautions contained in this  
manual should be read and understood before handling or maintaining the equipment.  
Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified  
using the procedures described in this manual, turn off the power, unplug the machine, then contact your  
authorized TOSHIBA TEC representative for assistance.  
Meanings of Each Symbol  
This symbol indicates warning items (including cautions).  
Specific warning contents are drawn inside the symbol.  
(The symbol on the left indicates a general caution.)  
This symbol indicates prohibited actions (prohibited items).  
Specific prohibited contents are drawn inside or near the symbol.  
(The symbol on the left indicates “no disassembling”.)  
This symbol indicates actions which must be performed.  
Specific instructions are drawn inside or near the symbol.  
(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)  
This indicates that there is the risk of death or serious injury if the  
machines are improperly handled contrary to this indication.  
WARNING  
Any other than the  
specified AC voltage  
is prohibited.  
Do not use voltages other than the  
voltage (AC) specified on the rating  
plate, as this may cause fire or  
electric shock.  
Do not plug in or unplug the power  
cord plug with wet hands as this may  
cause electric shock.  
Prohibited  
Prohibited  
Prohibited  
If the machines share the same  
outlet with any other electrical  
appliances that consume large  
amounts of power, the voltage will  
fluctuate widely each time these  
appliances operate. Be sure to  
provide an exclusive outlet for the  
machine as this may cause fire or  
electric shock.  
Do not place metal objects or  
water-filled containers such as flower  
vases, flower pots or mugs, etc. on  
top of the machines. If metal objects  
or spilled liquid enter the machines,  
this may cause fire or electric  
shock.  
Prohibited  
Do not insert or drop metal,  
flammable or other foreign objects into  
the machines through the ventilation  
slits, as this may cause fire or electric  
shock.  
Do not scratch, damage or modify  
the power cords. Also, do not place  
heavy objects on, pull on, or exces-  
sively bend the cords, as this may  
cause fire or electrical shock.  
Prohibited  
Disconnect  
the plug.  
Disconnect  
the plug.  
If the machines are dropped or their  
cabinets damaged, first turn off the  
power switches and disconnect the  
power cord plugs from the outlet, and  
then contact your authorized  
TOSHIBA TEC representative for  
assistance. Continued use of the  
machine in that condition may cause  
fire or electric shock.  
Continued use of the machines in an  
abnormal condition such as when the  
machines are producing smoke or  
strange smells may cause fire or elec-  
tric shock. In these cases, immedi-  
ately turn off the power switches and  
disconnect the power cord plugs from  
the outlet. Then, contact your author-  
ized TOSHIBA TEC representative for  
assistance.  
6
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Warnings  
Disconnect  
the plug.  
Disconnect  
the plug.  
If foreign objects (metal fragments,  
water, liquids) enter the machines,  
first turn off the power switches and  
disconnect the power cord plugs from  
the outlet, and then contact your  
authorized TOSHIBA TEC repre-  
sentative for assistance. Continued  
use of the machine in that condition  
may cause fire or electric shock.  
When unplugging the power cords,  
be sure to hold and pull on the plug  
portion. Pulling on the cord portion  
may cut or expose the internal wires  
and cause fire or electric shock.  
Connect a  
grounding  
wire.  
No disassem-  
bling.  
Ensure that the equipment is  
properly grounded. Extension cables  
should also be grounded. Fire or  
electric shock could occur on  
improperlygroundedequipment.  
Do not remove covers, repair or  
modify the machine by yourself. You  
may be injured by high voltage, very  
hot parts or sharp edges inside the  
machine.  
This indicates that there is the risk of personal Injury or damage to  
CAUTIONobjects if the machines are improperly handled contrary to this indication.  
Precautions  
The following precautions will help to ensure that this machine will continue to function correctly.  
Try to avoid locations that have the following adverse conditions:  
*
Temperatures out of the specification  
Shared power source  
*
*
Direct sunlight  
Excessive vibration  
*
*
Highhumidity  
Dust/Gas  
*
Do not subject the machine to sudden shocks.  
Do not press the keys too hard. Keys will operate correctly if they are touched lightly.  
Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and wrung out  
thoroughly. Never use thinner or other volatile solvent for cleaning.  
To ensure that the scale is operating correctly, place a known weight on the platter and check it for correct  
weight measurement. This should be done every morning before starting normal operations.  
When moving the machine, take hold of the case and lift the machine. Never hold the remote unit.  
Do not place the machines on unstable or slanted surfaces, as they may drop or fall and cause injury.  
USE ONLY TOSHIBA TEC SPECIFIED paper.  
DO NOT STORE the paper or ribbons where they might be exposed to direct sunlight, high temperatures, high  
humidity, dust, or gas.  
Ensure the machine is operated on a level surface.  
Any data stored in the memory of the machine could be lost during a machine fault.  
Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to  
cause mains interference.  
Unplug the machine whenever you are working inside it or cleaning it.  
Keep your work environment static free.  
Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing  
injury.  
Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and  
may cause fire.  
Do not lean against the machine. It may fall on you and could cause injury.  
Care must be taken not to injure yourself with the printer paper cutter.  
Unplug the machine when it is not used for a long period of time.  
Request Regarding Maintenance  
Utilize our maintenance services.  
After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistance once a  
year to have the inside of the machine cleaned. Otherwise, dust will build up inside the machines and may  
cause a fire or a malfunction. Cleaning is particularly effective before humid rainy seasons.  
Our preventive maintenance service performs the periodic checks and other work required to maintain the  
quality and performance of the machines, preventing accidents beforehand.  
For details, please consult your authorized TOSHIBA TEC representative for assistance.  
Using insecticides and other chemicals  
Do not expose the machines to insecticides or other volatile solvents. This will cause the cabinet or other parts  
to deteriorate or cause the paint to peel.  
SL-4700 Owner Manual  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Specifications  
2
Specifications  
Item  
SL-4700-US  
Weigh capacity  
Tare capacity (maximum)  
Display  
30lb x 0.01lb  
15lb  
4 digits LCD  
Power requirement  
Operating temperature  
Operating humidity  
Dimensions (appox.)  
Built-in type  
AC 120V 10%, 60Hz  
14° F to 104° F  
0% to 95% RH (non-condensing)  
13.78”(W) x 11.81”(D) x 3.43”(H)  
Remote display type  
Scale unit  
13.78”(W) x 11.02”(D) x 3.43”(H)  
5.98”(W) x 2.32”(D) x 15.35”(H)  
13.78”(W) x 11.02”(D)  
Display unit  
Platter  
Built-in type: 9.5lb  
Remote display type: 10.6lb  
Weight (approx.)  
Interface  
RS-232C, TEC parallel  
Item  
SL-4700-CA/QP/AU  
15kg x 5g  
Weigh capacity  
Tare capacity (maximum)  
Display  
7.5kg  
5 digits LCD  
CA: AC 120V 10%, 60Hz  
QP: AC 230V 10%, 50Hz (AC adaptor  
option)  
Power requirement  
AU: AC 100V to 240V, 47Hz to 63Hz  
Operating temperature  
Operating humidity  
-10° C to 40° C  
0% to 95% RH (non-condensing)  
8
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2 Specifications  
Dimensions (appox.)  
Scale unit  
350mm(W) x 280mm(D) x 87mm(H)  
Display unit  
Platter  
152mm(W) x 59mm(D) x 390mm(H)  
350mm(W) x 280mm(D)  
4.8kg  
Weight (approx.)  
Interface  
RS-232C, TEC parallel  
Options and accessories  
Options  
AC adaptor for QP model EU plug  
UK plug  
Accessories  
TEC parallel cable for TD/ TP models  
AC adaptor for US/CA/AU models  
SL-4700 Owner Manual  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Installation  
3
Installation  
1. Make sure that the work surface is firm, steady and free  
from vibration and draughts.  
2. Hold the scale by the base when picking up. Do not  
pick up the scale by the weigh plate or cross.  
3. Adjust the feet if the scale is not level.  
To avoid the risk of RSI (Repetitive Strain Injury) it is  
important to ensure that the machine is placed on a  
surface which is ergonomically satisfactory to the user.  
In cases where usage is prolonged EN614-1  
recommends frequent breaks for the user.  
10  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 Installation  
Connections  
1. Remove the weigh plate.  
2. Connect the power cable.  
SL-4700 Owner Manual  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Installation  
3. Connect the display. (RP/TP models only)  
4. Replace the weigh plate. Connect to power supply.  
12  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Installation  
Cable routing  
1
2
3
4
4
8
5
7
9
3
6
2
1
1
2
3
4
SL-4700 Owner Manual  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Installation  
Securing cable clips  
14  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Error Messages  
4
Error Messages  
If a persistent error message appears or the  
scale locks up, disconnect then reconnect the  
scale to the power supply. If the scale remains  
inoperative, contact your authorised service  
agent.  
(
ꢀꢁ  
Balance  
failed  
Weight  
unsteady  
Display  
overflow  
Over  
range  
Under  
range  
Display overflow error  
The load on the weighpan exceeds the scale capacity.  
Balance failed error  
On power up the weight is out of the allowed zero range.  
Check there is no load or debris on the weighpan.  
Error codes:  
E 10 Battery failure. Replace the batteries.  
E 30 Management mode not exited correctly. Re-enter  
Management mode and repeat the procedure.  
E 35 Prohibited function.  
E 151 Configuration change in Management mode has  
failed. Re-enter Management mode and repeat the  
procedure  
E 152 Prohibited function.  
Contact your authorised service agent if the scale remains  
inoperative or you see any other error message code.  
SL-4700 Owner Manual  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5 Using the Scale  
5
Using the Scale  
Testing the display  
Press  
LCD  
Displaying service information  
Press twice  
To reset the machine  
Press and hold  
LCD  
Zeroing the scale  
Make sure that the scale is at zero before weighing.  
16  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5 Using the Scale  
Weighing goods  
SL-4700 Owner Manual  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Management Mode  
6
Management Mode  
Entering management mode  
C
LCD  
Navigating management mode  
For Example:  
Branch - ꢀꢁ6ꢂꢃ - Sub-branch  
Branch (ꢀꢁ)  
- Value  
Sub-branch (ꢂꢄ)  
Branch (ꢀꢅ)  
Sub-branch (ꢆꢆ)  
Sub-branch (ꢆꢀ)  
Go to the next branch (press and hold).  
Go to next sub-branch.  
Go to the previous branch (press and hold).  
Go to previous sub-branch.  
Sets the value to 0 enabling you to display a  
new value.  
C
Return to Branch 00 (press and hold).  
Displays the value. Press again to re-display  
the branch / sub-branch.  
After clearing a value to be changed each key  
press increments the value displayed.  
Pressing and holding the key increments the  
value by 10.  
Note: After changing a value, you must go to  
the next branch to accept the value.  
18  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 Management Mode  
Example  
Turn the keyboard bleeper off and change the backlight time  
to 5 seconds.  
ꢆ6ꢆꢆ  
ꢀꢂ6ꢆꢆ  
ꢀꢂ6ꢆꢀ  
C
Press and hold  
ꢁꢆ6ꢆꢆ  
Press and hold  
Switching the bleeper alarm on/off  
Go to branch 19, Sub-branch 00  
0 = Off  
1 = On  
ꢀꢂ6ꢆꢆ  
Switching the keyboard bleeper on/off  
Go to branch 19, Sub-branch 01  
0 = Off  
1 = On  
ꢀꢂ6ꢆꢀ  
Target bleep  
Branch 19, Sub-branch 02 - Not applicable for this machine.  
SL-4700 Owner Manual  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Management Mode  
Error bleeper  
Go to branch 19, Sub-branch 03  
0 = Off  
1 = On  
Changing the bleeper volume  
Go to branch 19, Sub-branch 04  
0 = Quiet  
1 = Loud  
Backlight timeout  
Branch 20, Sub-branch 00 - Not applicable for this machine.  
Sleep timeout  
Branch 20, Sub-branch 01 - Not applicable for this machine.  
20  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Management Mode  
Sleep key enable  
Branch 20, Sub-branch 02 - Not applicable for this machine.  
LED display brightness  
Branch 20, Sub-branch 03 - Not applicable for this machine.  
Changing the duration of a ‘Long’ press  
(press and hold)  
Go to branch 29, Sub-branch 00  
Enter a value in units of 10 milliseconds  
(50 - 255). For example:  
200 = 2 seconds  
150 = 1½ seconds  
100 = 1 second  
Enabling key timeout  
Go to branch 74, Sub-branch 01  
0 = Disabled  
1 = Enabled  
SL-4700 Owner Manual  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Before you call for service  
Changing the timeout period  
Go to branch 74, Sub-branch 02  
Enter a value in units of 10 milliseconds  
(1 - 255). For example:  
200 = 2 seconds  
ꢇ 6ꢆꢁ  
ꢁꢆ  
150 = 11 seconds  
100 = 1 second  
7
Before you call for service  
It is our primary concern to give you full satisfaction and better  
service. If, however, any problem arises in connection with  
the operation of this scale, please check the following points  
before calling for service.  
G
Is the power plug fully plugged into an AC outlet?  
G
Is the AC power being properly supplied to the outlet?  
(Check it using another electrical appliance.)  
G
G
Check the circuit breaker.  
Has there been a power failure of any sort?  
WARNING: This scale has been manufactured under strict quality  
control. If you have trouble, however, DO NOT ATTEMPT TO FIX  
IT BY YOURSELF. Disconnect the power supply and contact your  
C>B7810ꢀC42 representative.  
22  
SL-4700 Owner Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EO1-31010B  
E
Download from Www.Somanuals.com. All Manuals Search And Download.  

Thermo Products Furnace GMC 85 User Manual
Timex Clock T105WX User Manual
Timex Watch W 865 User Manual
Toastmaster Griddle TMEG15W B User Manual
Toastmaster Toaster TC21D3663 User Manual
Toshiba Security Camera IK UM44H User Manual
Tripp Lite Power Supply APSX750F User Manual
Verilux Home Safety Product VB03 User Manual
Vertical Communications Telephone 7714s User Manual
ViewSonic Computer Monitor E92F+ User Manual