ADJUSTABLE SPEED DRIVES
Q9 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
HVAC-Minded
Designed for HVAC Systems
The Q9 ASD is designed for HVAC systems offering many popular features needed in the industry.
It comes equipped with a fire-speed circuit that forces the drive to run at a preset speed during
a smoke purge. The Q9 also provides a damper-permissive function that can be used to protect
from over-pressuring ductwork.
A user can set a low-output disable time to force the drive to zero-speed if the drive runs at the
lower limit frequency for a specified time. This option helps reduce energy costs.
PID Control
A built-in proportional/integral/derivative (PID) controller, used to regulate a process without
the need for external control devices, comes standard with the Q9. In addition, the wire-break
function trips the drive if the feedback signal drops below specified levels. This prevents the drive
from accelerating to maximum speed and helps protect the system.
Communications
The Q9 supports many common
protocols used in HVAC applications
including:
• BACnet (MS/TP)®
• LonWorks®
• Metasys N2®
• Modbus RTU®
• APOGEE FLN®
Internal Communication Option Cards
Download from Www.Somanuals.com. All Manuals Search And Download.
System-Friendly
The Q9 includes multiple features in its standard design that protects the drive, your equipment,
and your systems.
Alarms & Faults
The Q9 provides various alarms and fault-notifications that serve to alert the user when poor
operating conditions are present. This capability not only protects your drive but also protects the
motor that is connected to it.
Equipment Friendly
The Q9’s speed search function can detect the speed and direction of a spinning motor and start
smoothly without tripping. This drive feature proves especially useful when trying to start a motor
after a momentary power outage or in the case of a free-wheeling fan.
Adjustable acceleration/deceleration times and stall capabilities allow for minimal stress on fans,
pumps, belts, and pulleys.
TheQ9iscapableofprogramminguptothreedifferentskipfrequencies. User-selectedfrequencies
may be "skipped" to avoid the negative effects of mechanical resonance.
ASD Pro Software
Toshiba offers downloadable software that can be used to interface with the Q9 at no additional
cost. The software can be used to program and control the Q9, download parameter sets, and
monitor real-time conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Integrated Enclosure
& Extender Box
Toshiba allows you to “build your own drive” by including many of the popular features
requested by the HVAC market as choices for your own standard package. The
configurations you can choose include line reactors for input power-conditioning and
harmonic mitigation, as well as the choice between two or three-contactor bypasses to
allow for across-the-line motor operation.
Integrated Enclosure
“Build your own drive” uses a
standard NEMA 1 enclosure
that is available with the
following options:
• Input Circuit Breaker
• Two-Contactor Bypass
• Three-Contactor Bypass
• 3% AC Line Reactor
• 5% AC Line Reactor
• DC Link Reactor
Extender Box
The extender box includes the
same options for line reactors
and bypass configurations as
the integrated enclosure. The
Integrated Enclosure Dimensions
Without Reactor
extender box is connected to
230 V
460 V
3 to 7.5 HP
3 to 15 HP
28.5
10 to 25 HP
20 to 40 HP
45.5
the bottom of the standard
Q9 power unit, and the entire
assembly is NEMA 1 rated.
Height (in.)
Width (in.)
Depth (in.)
16.1
16.1
10.6
13.9
Bypass Box Dimensions
Without Reactor
With Reactor
230 V
460 V
30 HP
-
40 HP
50 to 100 HP
36.3
-
50 to 60 HP
36.3
30 HP
-
40 HP
75 to 100 HP
41.3
Height (in.)*
Width (in.)
Depth (in.)
35.5
16.0
12.5
40.5
16.0
12.5
16.0
16.0
16.0
12.5
12.5
12.5
* Height does not include power unit dimension.
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout & Enclosure
Rotary Encoder
LCD Display
Accesses the Q9 Menu
Selections, Changes
Parameter Values, and
Performs Enter Function;
Up and Down Functions
Operated by Rotating
Encoder
Displays Configuration
Information, Performance
Data, and Diagnostic
Information
Option Card Status LEDs
Shows Stackable Option
Card Status LEDs When
Options are Installed
ESCAPE Key
Returns System to
Previously Viewed
Menu Item
LOCAL/REMOTE Key
Toggles System to and
from Local/Remote Modes;
LOCAL/REMOTE Key Light
Illuminates Green While in
Local Mode
MODE Key
Provides a Means to
Access Five Root Menus
STOP/RESET Key
Issues Off Command
While in Local Mode;
Initiates Emergency-Off if
Pressed Twice Quickly;
Resets Active Faults
and/or Alarms if Pressed
Twice Quickly
RUN Key
Issues Run Command
While in Local Mode;
RUN Key Light
Illuminates Red While
Running and Green While
Stopped
Panel Door
Allows Easy Access to
Control Terminal Strip
Panel Locking Screw
Allows for Simple
Front-Panel Locking
and Unlocking
Download from Www.Somanuals.com. All Manuals Search And Download.
Meets or Exceeds
Your Specifications
Q9 Standard Specifications
Input Voltage
230 V
HP Rating
1
4.8
2
7.8
3
11
5
17.5
7.5
25.3
10
32.2
15
48.3
20
62.1
25
78.2
30
92
40
120
50
150
60
177
Current Rating
Input Voltage
HP Rating
Current Rating
HP Rating
460 V, 50/60 Hz, Three-Phase
1
2
3
5
7.5
11
200
240
10
14
250
302
15
21
300
361
20
27
350
414
25
34
400
477
30
40
40
52
50
65
60
77
2.1
75
96
3.4
100
124
4.8
125
156
7.6
150
180
Current Rating
Power Requirements
200 to 240 V, 50/60 Hz, Three-Phase
Input (L1/R, L2/S, L3/T), Output (T1/U, T2/V, T3/W), DCL (PO, PA), DC Bus (PA, PC)
Input Voltage Range
Power Terminals
380 to 480 V, 50/60 Hz, Three-Phase
Voltage Tolerance
Frequency Tolerance
±10%
±2%
Control Specifications
Sine Wave Pulse-Width Modulated System
0 to 299 Hz
Output Method
Output Frequency Range
Constant Torque, Variable Torque, Automatic Torque Boost, Sensor-Less Vector Control (Speed), V/f Five-Point Setting,
Permanent Magnet Control, Auto Power-Saver
V/Hz Pattern
Overload Current Rating
Frequency Control
100% Continuous; 110% for One Minute
Rotary Encoder Integrated Into EOI, 0 to 10 VDC, ±10 VDC, 4 to 20 mA, Binary Input, Motor Operated Potentiometer
Analog Input: ±0.2% of Maximum Output Frequency; Digital Input: ±0.01% of ±0.022 Hz of Output Frequency
Operation Panel: 0.01 Hz
Frequency Accuracy
Frequency Resolution
Acceleration/Deceleration 0.1 to 6000 Seconds
Analog Inputs
Three: One Isolated Input Selectable Between 0 to 10 VDC/4 to 20 mA, One 0 to 10 VDC, and One ±10 VDC
Analog Outputs
Discrete Inputs
Two Programmable to 57 Functions (One Switchable 0 to 10 VDC/0 to 20 mA, and One 0 to 1 mA)
Eight Programmable to 41 Functions
Sink/Source Switching
Discrete Outputs
PID (Set Point Control)
Braking Control
Ability to Switch Between Sink Logic and Source Logic
Three Programmable to 83 Functions (Two Form-A and One Form-C); Outputs Rated at 2 A/120 VAC, 2 A/30 VDC
Adjustment of Proportional Gain, Integral Time, Differential Time, and Delay Filter
DC Braking, Over-Flux Braking
Communication Ports
Communication Protocol
Two-Wire/Four-Wire RS485
BACNet®, LonWorks®, Metasys N2®, Modbus RTU®, APOGEE FLN®
Protection
Protective Functions
Overvoltage Stall, Overcurrent Stall, Critical (Skip) Frequencies, Ride-Through, Electronic Thermal Motor Protection
Interrupting Current Rating 100,000 AIC
Overcurrent, ASD Overheat, ASD Overload, Motor Overload, Overvoltage, Overtorque, Undercurrent, Ground Fault,
Faults
Communication Time-Out, Analog-Input Terminal Overvoltage, Emergency Stop, Input/Output Phase Loss, RAM/ROM
Error, Undervoltage
Retry
Restart
Ability to Reset Certain Faults Automatically; Programmable Up to 10 Retries
Ability to Detect Speed and Direction of Freewheeling Motor and Start into Motor Smoothly
Interface
EOI Display
Keys
Rotary Encoder
Monitoring
Display Units
Full-English Backlit LCD Display
LOCAL/REMOTE, ESC, RUN, MODE, STOP/RESET
Encoder with Integrated Enter Key for Frequency and Parameter Adjustments
Monitors 19 Drive Conditions
Programmed to Display Percentage or Volts/Amps
Ambient Conditions
Temperature
Relative Humidity
Altitude
-10˚ to 40˚C
Maximum 93% (Non-Condensing)
1000 Meters or Less
Q9 Dimensions
3 to
5 HP
15 to
20 HP 30 HP
25 to
40 to
60 HP
230 V
460 V
1 to 2 HP
1 to 3 HP
7.5 HP 10 HP
-
-
100 HP 125 HP
-
-
-
5 to
7.5 HP
15 to
25 to
50 to
60 HP
75 to
125 HP
300 to
350 HP
10 HP
40 HP
-
150 HP 200 HP 250 HP
400 HP
20 HP 30 HP
5A 5B
12.6 15.7
8.3 9.1
7.5 7.5
Frame
2
3
4
6
7A
21.7
9.4
7B
8
9B
10B
40.2
13.8
14.6
11B
46.9
13.0
14.6
12B
46.9
16.9
14.6
13A
46.9
23.0
14.6
Height (in.)
Width (in.)
Depth (in.)
10.0
5.1
6.0
11.1
6.1
12.6
6.9
16.5
9.4
21.7
12.6
24.8
12.6
36.2
12.2
14.6
6.5
6.5
8.3
8.3
9.5
11.4
Download from Www.Somanuals.com. All Manuals Search And Download.
North America Headquarters & Manufacturing Facilities (Houston, TX)
TOSHIBA — Quality by Design
Toshiba's culture and history are strongly rooted in quality. Our designs are
technologically innovative, and our products are manufactured from start to
end using only the highest quality domestic and foreign parts.
Product Warranty
Toshiba offers a comprehensive warranty program on its full line of industrial
products. Consult your salesperson or the factory for specific information.
Need to Know More?
information on Toshiba products and services.
Customer Support Services
Toshiba offers 24-hour service nationwide. For assistance of any type
call: 1-800-231-1412.
ADJUSTABLE SPEED DRIVES
MOTORS
CONTROLS
UPS
INSTRUMENTATION
PLC
Available Through:
INDUSTRIAL DIVISION
13131 West Little York Road, Houston, Texas 77041
Tel 713/466-0277 Fax 713/466-8773
US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204
Copyright 6/2008
Download from Www.Somanuals.com. All Manuals Search And Download.
*asdq9BROC080610*
|
Tektronix Portable Generator TSG 1001 User Manual
Timex Clock T025 User Manual
Toshiba CRT Television 32A13 User Manual
TP Link Home Security System TL SC2020N User Manual
Triarch Indoor Furnishings 25951 User Manual
Tricity Bendix Ventilation Hood TBH 630 User Manual
Tripp Lite Computer Accessories B130 101A WP User Manual
Tripp Lite Power Supply AG 0018 User Manual
Troy Bilt Tiller 12174 User Manual
Vizio Network Router TL R480T User Manual