MULTIFUNCTIONAL DIGITAL SYSTEMS
Operator's Manual for
Wireless LAN Module
GN-1050
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual
explains the instructions for Wireless LAN Module GN-1050. Read this manual before using your Multifunctional Digital
Systems or Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an
environment that makes best use of the e-STUDIO’s functions.
„ How to read this manual
‰ Symbols in this manual
In this manual, some important items are described with the symbols shown below. Be sure to read these items before
using this equipment.
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious
injury, or serious damage, or fire in the equipment or surrounding objects.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury, partial damage to the equipment or surrounding objects, or loss of data.
Indicates information to which you should pay attention when operating the equipment.
Other than the above, this manual also describes information that may be useful for the operation of this equipment with
the following signage:
Describes handy information that is useful to know when operating the equipment.
Pages describing items related to what you are currently doing. See these pages as required.
‰ Model and series names in this manual
In this manual, each model name is replaced with the series name as shown below.
Model name
e-STUDIO5520C/6520C/6530C
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C e-STUDIO4520C Series
Series name in this manual
e-STUDIO6530C Series
e-STUDIO205L/255/305/355/455
e-STUDIO555/655/755/855
e-STUDIO455 Series
e-STUDIO855 Series
‰ Explanation for control panel and touch panel
y Illustrations for the control panel and the touch panel shown in this manual are those of the e-STUDIO455 Series. The
control panel and the touch panel, including buttons and their functions, are common to all of the e-STUDIO4520C
Series, e-STUDIO455 Series and e-STUDIO855 Series. The shape and location of some buttons on the control panel
and the dimension of the touch panel of the e-STUDIO6530C Series differ from those of other series, however, the
names and functions of the buttons and parts are the same.
y The details on the touch panel menus may differ depending on the operating environment such as whether options are
installed.
y The illustration screens used in this manual are for paper in the A/B format. If you use paper in the LT format, the
display or the order of buttons in the illustrations may differ from that of your equipment.
Preface
1
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ Trademarks
y The official name of Windows 2000 is Microsoft Windows 2000 Operating System.
y The official name of Windows XP is Microsoft Windows XP Operating System.
y The official name of Windows Vista is Microsoft Windows Vista Operating System.
y The official name of Windows 7 is Microsoft Windows 7 Operating System.
y The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System.
y The official name of Windows Server 2008 is Microsoft Windows Server 2008 Operating System.
y Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft products are
trademarks of Microsoft Corporation in the US and other countries.
y Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari, and TrueType are trademarks of Apple Inc. in the US and other
countries.
y Adobe, Adobe Acrobat, Adobe Reader, Adobe Acrobat Reader, and PostScript are trademarks of Adobe Systems
Incorporated.
y Mozilla, Firefox and Firefox logo are trademarks or registered trademarks of Mozilla Foundation in the U.S. and other
countries.
y IBM, AT and AIX are trademarks of International Business Machines Corporation.
y NOVELL, NetWare, and NDS are trademarks of Novell, Inc.
y TopAccess is a trademark of Toshiba Tec Corporation.
y Other company names and product names in this manual are the trademarks of their respective companies.
2
Preface
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
„ Precautions for Use
This product is classified as “wireless equipment for stations of low-power data transmissions systems” under the Wireless
Telegraphy Act, and does not require a radio transmission license. The law prohibits modification of the interior of this
product.
„ About TOSHIBA Wireless Solution
The Wireless LAN Module is a wireless network Module that complies with the IEEE 802.11 standard on wireless LANs
(Revision B/G). The Wireless LAN Module supports data rates up to 54 Mbit/s.
y Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. This means that your Wireless hardware will communicate with
other vendors’ IEEE 802.11 B/G compliant wireless LAN product.
y Fully compatible with any of other wireless LAN system based on Direct Sequence Spread Spectrum (DSSS)/
Orthogonal Frequency Division Multiplexing (OFDM) radio technology that complies with the IEEE 802.11 standard on
wireless LANs (Revision B/G).
‰ Wireless Interoperability
The TOSHIBA Wireless LAN products are designed to be interoperable with any Wireless LAN products that is based on
Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is
compliant to:
y The IEEE 802.11 Standard on Wireless LANs (Revision B/G), as defined and approved by the Institute of Electrical
and Electronics Engineers.
y The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance.
‰ Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted
by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for
example mobile phones.
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and
recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and result from deliberations of panels and
committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or
responsible representatives of the organization. These situations may for example include:
y Using the Wireless LAN equipment on board of aeroplanes, or
y In any other environment where the risk of interference to other devices or services is perceived or identified as
harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g.
airports), you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment.
‰ Safety Instruction for Wireless Products
If your computer has wireless function, all safety instructions must be read carefully and must be fully understood, before
attempting to use our Wireless Products.
This manual contains the safety instructions that must be observed in order to avoid potential hazards that could result in
personal injuries or could damage your Wireless Products.
Limitation of Liability
For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident,
intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility.
For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product,
we do not take any responsibility.
For damage occurring due to non observance of the contents described in the instruction manual, we do not take any
responsibility.
For damage occurring due to erroneous operation or hang up caused by use in combination with products not related to
our company, we do not take any responsibility.
Precautions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Keep this product away from a cardiac pacemaker at least 22 cm.
Radio waves can potentially affect cardiac pacemaker operation, thereby causing
respiratory troubles.
Do not use the product inside a medical facility or near medical electric equipment.
Radio waves can potentially affect medical electric equipment, thereby causing an
accident due to malfunction.
Do not use the product near an automatic door, fire alarm or other automatic control
equipment.
Radio waves can potentially affect automatic control equipment, thereby causing an
accident due to malfunction.
Monitor possible radio interference or other troubles to other equipment while the
product is used. If any effect is caused, do not use the product.
Otherwise, radio waves can potentially affect other equipment, thereby causing an
accident due to malfunction.
NOTE
Do not use the product in the following places:
Places near a microwave oven where a magnetic field generates and places where static electricity or radio interference
generates.
Depending on environment, radio waves can not reach to the product.
Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another.
If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal
network performance or even lose your network connection.
4
Precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ Regulatory Information
The TOSHIBA Wireless LAN must be installed and used in strict accordance with the manufacturer’s instructions as
described in the user documentation that comes with the product. This device complies with the following radio frequency
and safety standards.
Standards below are certified under the operation with the provided antenna (GN-3010). Do not use this product with other
antennas.
‰ Canada - Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of this device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2)
l’utilisateur du dispositif doit étre prét à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.
The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications
were met.
‰ Europe - EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC with essential test suites as per
standards:
EN 300 328:
Electromagnetic compatibility and Radio Spectrum Matters (ERM); Wideband Transmission systems; Data transmission
equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques
EN 301 489-17:
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services;
Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
EN 60950-1:
Safety of information technology equipment, including electrical business equipment
EN 50385:
Product standard to demonstrate the compliance of radiobase stations and fixed terminal stations for wireless
telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio
frequency electromagnetic fields (110 MHz - 40 GHz)
Hereby, TOSHIBA TEC, declares that this GN-1050 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
TOSHIBA TEC vakuuttaa täten että GN-1050 tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Hierbij verklaart TOSHIBA TEC dat het toestel GN-1050 in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG
Bij deze verklaart TOSHIBA TEC dat deze GN-1050 voldoet aan de essentiële eisen en aan
de overige relevante bepalingen van Richtlijn 1999/5/EC.
Par la présente TOSHIBA TEC déclare que l'appareil GN-1050 est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE
Par la présente, TOSHIBA TEC déclare que ce GN-1050 est conforme aux exigences
essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables
Härmed intygar TOSHIBA TEC att denna GN-1050 står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Undertegnede TOSHIBA TEC erklarer herved, at følgende udstyr GN-1050 overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF
Hiermit erklärt TOSHIBA TEC, dass sich dieser/diese/dieses GN-1050 in Übereinstimmung
mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der
Richtlinie 1999/5/EG befindet". (BMWi)
Precautions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hiermit erklärt TOSHIBA TEC die Übereinstimmung des Gerätes GN-1050 mit den
grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie
1999/5/EG. (Wien)
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ TOSHIBA TEC ∆ΗΛΩΝΕΙ ΟΤΙ GN-1050 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/
EK
Ƭ Toshiba TEC Corporation įdžNJǙnjİLj µİ IJǎ ȺĮǏǗnj ǗIJLj IJǎ µǎnjIJƿNJǎ GN-1050
ĮıǘǏµĮIJǎǑ ȺǏǎıĮǏµǎDŽƿĮ LAN ıǑµµǎǏijǙnjİIJĮLj µİ IJLjǐ ǃĮıLjljƿǐ ĮȺĮLjIJǀıİLjǐ ljĮLj IJLjǐ
NJǎLjȺƿǐ ıǒİIJLjljƿǐ įLjĮIJƾǍİLjǐ IJdžǐ ƳįdžDŽǁĮǐ 1999/5/EƮ
Con la presente TOSHIBA TEC dichiara che questo GN-1050 è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Por medio de la presente TOSHIBA TEC declara que el GN-1050 cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/
CE
TOSHIBA TEC declara que este GN-1050 está conforme com os requisitos essenciais e
outras disposicões da Directiva 1999/5/CE.
Toshiba TEC Corporation, GN-1050 model Kablosuz LAN Adaptörünün 1999/5/EC
Tüzü÷ünün temel gereksinimlerine ve di÷er ilgili uygulamalara uydu÷unu beyan eder.
Thoshiba TEC Corpration timto prohlasuje, ze GN-1050 je ve shode se zakladnimi
pozadavky a s dalsimi prislusnymi ustanoveni Narizeni vlady c. 426/2000 Sb.
Toshiba TEC Corporation declarã prin prezenta cã adaptorul fãrã fir LAN model GN-1050
este în conformitate cu cerinþele esenþiale ºi cu alte prevederi corespunzãtoare ale
Directivei 1999/5/EC
‰ USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
y Reorient or relocate the receiving antenna.
y Increase the distance between the equipment and the receiver.
y Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Labelling
Toshiba TEC Wireless LAN Module GN-1050 labelled as below.
FCC ID: BJI-GN1050
The proposed FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into
the system, “Contains FCC ID:BJI-GN1050” shall be placed on the outside of final host system.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
6
Precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
‰ Regulatory Notice for Channel Use in France
The number of channels that can be used for wireless LAN differs from country to country. In France however, user only 4
channels (channel 10, 11, 12, 13) when using wireless networks.
y Channel 10 (2457 MHz)
y Channel 11 (2462 MHz)
y Channel 12 (2467 MHz)
y Channel 13 (2472 MHz)
France limited to 2446.5-2483.5 MHz Indoor use.
Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use.
‰ Singapore Portion
‰ Approved Countries/Regions for use for the Toshiba Wireless LAN
This equipment is approved to the radio standard by the specific countries/regions. Please ask Toshiba authorized dealer
or service engineer.
„ NOTES!
y The unauthorized reproduction of this document, in whole or in part, is prohibited.
y The specifications, designs, and other contents of this document are subject to change without notice.
y The contents of this document are believed to be accurate, however if any discrepancies noted should be brought to
the attention of TOSHIBA authorized dealer or service engineer.
y Notwithstanding the foregoing, the manufacturer is unable to accept any claims for losses or lost profits, etc. Resulting
from the use of this product.
y TOSHIBA TEC will not guarantee the machine performance if you perform any setting other than specified in this
manual.
Precautions
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Precautions............................................................................................................................... 3
Selecting WEP security mode........................................................................................ 33
Selecting WEP security mode........................................................................................ 42
CONTENTS
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10 CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
SETTING UP WIRELESS NETWORK
This chapter describes about the preparations before setting up the wireless settings of the equipment.
Before Setting Up Wireless Network.................................................................................... 12
Select network type..............................................................................................................................................15
Select security mode............................................................................................................................................21
Select network type..............................................................................................................................................37
Select security mode............................................................................................................................................42
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Before Setting Up Wireless Network
This product is a Wireless LAN Module using the 2.4 GHz spectrum diffusion system, and is compatible with IEEE
Standard 802.11g and 802.11b for wireless LAN.
When the Wireless LAN is enabled, users can perform the following printing through the Wireless LAN:
y Raw TCP Printing from Windows computers
y LPR Printing from Windows computers
y LPR Printing from Macintosh computers
y LPR Printing from UNIX/Linux workstation
The instructions on how set up the client computers for Wi-Fi printing is same as the instructions for wired network
printing. For instructions on how to set up the client computers, please see Software Installation Guide.
y To access the equipment through the Wireless LAN from the client computers, the client computers must have the
Wireless LAN Module.
y When you enable the wireless network, the existing NIC (Network Interface Card) will be disabled. This equipment
cannot connect the wired network and wireless network at the same time.
y When the Wireless LAN Module is installed in the e-STUDIO455 Series / e-STUDIO855 Series, the equipment
enters into the Sleep mode, though the Super Sleep mode is enabled in the Energy Saver function.
„ Planning for installation
Before setting up the Wireless LAN Module for your wireless LAN, read through this section to understand the information
that you require to set up the equipment in your wireless LAN.
‰ Determine the network type
This Wireless LAN Module supports Infrastructure Mode and Ad Hoc Mode.
Infrastructure Mode
Access Point
In the Infrastructure Mode, client computers can access to the equipment through a wireless network via an Access Point.
The Infrastructure Mode is suitable for the wireless network that many client computers are connected at the same time.
The Access Point will be required to establish the wireless network in the Infrastructure Mode.
Ad Hoc Mode
In the Ad Hoc Mode, client computers can access to the equipment directory through a wireless network without an
Access Point. The Ad Hoc Mode is not suitable for the wireless network that many computers are connected, however, it
is easy to establish the wireless network because the Access Point is not required.
12 Before Setting Up Wireless Network
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
‰ Determine the SSID
In the wireless network, the same SSID (Service Set ID) must be assigned in each wireless device. Only wireless devices
that have the same SSID assigned to them can communicate with each other through the wireless network.
In the Infrastructure Mode, the SSID is usually set in the Access Point. Therefore, you must set the same SSID in this
equipment to communicate through the wireless network via the Access Point.
In the Ad Hoc Mode, you must assign the same SSID that is assigned to other client computers. To access the devices
each other in the Ad Hoc Mode, the same SSID must be assigned to each device.
‰ Determine the security mode
This equipment supports the following wireless security modes.
WPA/WPA2
Using the WPA/WPA2, you can restrict the access to the wireless network using the RADIUS server. The WPA/WPA2 is
available only when the wireless network is established in the Infrastructure Mode.
There are two protocols for the WPA/WPA2, EAP-TLS or PEAP.
When using the EAP-TLS authentication, you must install user certification file (must be either DER, BASE64, or PKCS#7
encoding format) and CA certification file (must be exported as a private key in PKCS#7 encoding format) in the
equipment. This equipment uses the user certification file to authenticate the access rights to the wireless network, and
the RADIUS server authenticate this equipment using the user ID and password.
When using the PEAP, you must install the CA certification file (must be either DER, BASE64, or PKCS#7 encoding
format) in the equipment. This equipment uses the user name and password to authenticate the access rights to the
wireless network, and the RADIUS server authenticate this equipment using the CA certification file.
EAP-TLS
PEAP
RADIUS
Server
RADIUS
Server
Access
Point
2
Access
Point
1
1
2
CA
CA
3
3
CA
CA
User
1
2
Establish the communication between the AP.
1
2
Establish the communication between the AP.
Confirm the CA certification between the RADIUS server and
the equipment.
Confirm the CA certification between the RADIUS server and
the equipment.
3
Send the user certification to the RADIUS server to authenticate
the user certification.
3
Send the user name and password to the RADIUS server for
authentication.
This equipment supports following RADIUS server.
y For EAP-TLS: Windows Server 2000, Windows Server 2003, Steel-belted Radius
y For PEAP: Windows Server 2000, Windows Server 2003
WPAPSK/WPA2PSK
The WPAPSK/WPA2PSK is an authentication method using the PSK (Pre-Shared Key) between the Access Point and
other wireless devices. The WPAPSK/WPA2PSK authentication is available only when the wireless network is established
in the Infrastructure Mode.
To access the wireless network using the WPAPSK/WPA2PSK authentication, the same PSK Path Phrase must be
assigned in both the Access Point and other wireless devices. If the PSKs are same between the Access Point and other
wireless devices, the Access Point allows them to access the wireless network through the Access Point.
The WPAPSK/WPA2PSK has stronger security than WEP because the data encryption is improved over WEP. This
equipment supports TKIP and AES (CCMP) encryption for the WPAPSK/WPA2PSK authentication.
The TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed
interval.
The AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES.
This authentication method is suitable for a small wireless network and easy to add the security because the
authentication server is not required unlike the WPA/WPA2.
When using WPAPSK/WPA2PSK, it is recommended to use a secure password for WPAPSK/WPA2PSK.
Before Setting Up Wireless Network 13
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
WEP
The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.
Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the
Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/
WPA2 or WPAPSK/WPA2PSK rather than WEP.
The WEP authentication is available for both the Infrastructure Mode and Ad Hoc Mode.
14 Before Setting Up Wireless Network
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode
The wireless settings can be operated from the Control Panel of this equipment.
When setting up the equipment for the wireless network in the Infrastructure Mode, follow the steps below.
1. Select the network type
2. Specify the SSID
3. Select the security mode
„ Select network type
First access the WIRELESS SETTING screen from the ADMIN menu from the Touch Panel Display to select the network
type for the wireless network.
If you are not sure what network type to select, see the following section to determine the network type first.
Press the [USER FUNCTIONS] button on the control panel to enter the User Functions
menu.
1
Press the [ADMIN].
The ADMINISTRATOR PASSWORD screen is displayed.
2
Press the [PASSWORD].
3
The input screen is displayed.
Enter the administrator password and press the [OK].
4
The ADMIN menu is displayed.
Setting Up the Infrastructure Mode 15
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Press the [WIRELESS SETTINGS].
5
6
The WIRELESS SETTINGS menu is displayed.
Press the [WIRELESS SETTINGS].
The WIRELESS SETTINGS screen is displayed.
It may take a time to display the WIRELESS SETTINGS screen.
Press the [ON] and press the [NEXT].
7
The NETWORK TYPE screen is displayed.
16 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Press the [INFRASTRUCTURE] and press the [NEXT].
8
The SSID SETTINGS screen displayed.
9
Continue to the procedure for specifying the SSID.
Setting Up the Infrastructure Mode 17
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
„ Specify SSID
When you select the Infrastructure Mode for the network type, you can specify the SSID by selecting the available network
list or manually entering the SSID.
If you are not sure how the SSID must be specified, see the following section to determine the SSID.
‰ Selecting the SSID from the available network list
This equipment can search the available SSID automatically from the wireless network. Then you can select the SSID
from the list.
Press the [AVAILABLE NETWORK].
1
The AVAILABLE NETWORK screen is displayed.
Select the SSID that this equipment will connect and press the [OK].
2
The screen returns to the SSID SETTINGS screen.
y The available network may not displayed according to the communication environmental conditions.
y If the desired SSID is not displayed, please specify the SSID manually.
y This Wireless LAN supports only channel 1 to 11. This equipment cannot connect the Access Point that
uses the other channel than these channels. Please make sure to set the channel between 1 to 11 in the
Access Point.
18 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Press the [NEXT].
3
The WIRELESS LAN SECURITY SETTINGS screen is displayed.
4
Continue to the procedure for specifying the security mode.
‰ Entering the SSID manually
Press the [SSID].
1
The letter entry screen is displayed.
Setting Up the Infrastructure Mode 19
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Enter the SSID using the keyboard and digital keys and press the [OK].
2
The screen returns to the SSID SETTINGS screen.
Press the [NEXT].
3
4
The WIRELESS LAN SECURITY SETTINGS screen is displayed.
Continue to the procedure for specifying the security mode.
20 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
„ Select security mode
After specifying the SSID, you must select the security mode for your wireless network.
The procedure to configure the security mode varies depending on the security mode that you select.
If you are not sure what security mode to select, see the following section to determine the security mode.
‰ Selecting WPA/WPA2 security mode with EAP-TLS protocol
Using the WPA/WPA2 with the EAP-TLS protocol, you must install user certification file and CA certification file in the
equipment. This equipment uses the user certification file to authenticate the access rights to the wireless network, and
the RADIUS server authenticate this equipment using the CA certification file.
When using the WPA/WPA2 with the EAP-TLS protocol, you must install the CA certification file and user certification
file in the equipment using TopAccess first. For instructions on how to install the CA certification and user certification
files using TopAccess, refer to TopAccess Guide.
Press the [WPA] or [WPA2] and press the [NEXT].
1
The AUTHENTICATION SETTINGS screen is displayed.
When the [WPA] or [WPA2] is selected, TKIP or AES(CCMP) can be selected.
Setting Up the Infrastructure Mode 21
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Press the [EAP-TLS] and press the [NEXT].
2
The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed.
Setting PMK cache
When the [WPA2] is selected in step 1, the PMK cache can be switched to ON or OFF. When the [WPA] is
selected, the item for setting PMK cache is not displayed.
Press the [EAP USER NAME].
3
4
The letter entry screen is displayed.
Enter the EAP user name using the keyboard and digital keys and press the [OK].
The screen returns to the WIRELESS AUTHENTICATION (EAP-TLS) screen.
In the EAP USER NAME, enter the user name in “User Name@FQDN” format.
Example: [email protected]
22 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Press the [NEXT].
5
The WIRELESS AUTHENTICATION - USER CERTIFICATION screen is displayed.
Specify the following items and press the [NEXT].
6
y [USER CERTIFICATE]
Press this to enter the file name of the user certification file that you install in the equipment using TopAccess. If
the specified certification file is not installed in the equipment, the error message to input correct file name will be
displayed.
y [PASSWORD]
Press this to enter the password for the user certification file.
When pressing the [USER CERTIFICATE] or [PASSWORD], the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [OK] to set the entry.
Setting Up the Infrastructure Mode 23
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
7
y ENCODING FORMAT
Select the encoding format of the CA certification file.
y [CA CERTIFICATE]
Press this to enter the file name of the CA certification file that you install in the equipment using TopAccess. If the
specified certification file is not installed in the equipment, the error message to input correct file name will be
displayed.
When pressing the [CA CERTIFICATE], the letter entry screen is displayed. Enter the value using the keyboard
and digital keys, and press the [OK] to set the entry.
Specify the following items and press the [NEXT].
8
y FULL AGREEMENT of SERVER NAME
Select the [ON] to confirm whether the RADIUS server name in the server certification file and the input RADIUS
server name is same or not. When the [ON] is selected, press the [RADIUS SERVER NAME] to enter the RADIUS
server name.
In the RADIUS SERVER NAME, enter the user name in “Server Name@FQDN” format.
Example: [email protected]
y ENCRYPTION INTENSITY
Select the encryption intensity.
24 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
9
y ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.
The encryption intensity between each encryption is:
AES(CCMP) > TKIP
Specify the following items and press the [NEXT].
10
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
y TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
Setting Up the Infrastructure Mode 25
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Confirm the settings and press the [FINISH].
11
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
12
The wireless settings apply after restarting the equipment.
26 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
‰ Selecting WPA/WPA2 security mode with PEAP protocol
Using the WPA/WPA2 with the PEAP protocol, you must install the CA certification file in the equipment. This equipment
uses the user name and password to authenticate the access rights to the wireless network, and the RADIUS server
authenticate this equipment using the CA certification file.
When using the WPA/WPA2 with the PEAP protocol, you must install the CA certification file in the equipment using
TopAccess first. For instructions on how to install the CA certification using TopAccess, refer to TopAccess Guide.
Press the [WPA] or [WPA2] and press the [NEXT].
1
The AUTHENTICATION SETTINGS screen is displayed.
When the [WPA] or [WPA2] is selected, TKIP or AES(CCMP) can be selected.
Press the [PEAP] and press the [NEXT].
2
The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed.
Setting PMK cache
When the [WPA2] is selected in step 1, the PMK cache can be switched to ON or OFF. When the [WPA] is
selected, the item for setting PMK cache is not displayed.
Setting Up the Infrastructure Mode 27
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Enter the following items and press the [NEXT].
3
y [EAP USER NAME]
Press this to enter the EAP user name that is used for the authentication.
In the EAP USER NAME, enter the user name in “User Name@FQDN” format.
Example: [email protected]
y [EAP PASSWORD]
Press this to enter the EAP password that is used for the authentication.
y [RETYPE PASS]
Press this to enter the EAP password again that you enter in the EAP PASSWORD field.
When pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital
keys, and press the [OK] to set the entry.
Specify the following items and press the [NEXT].
4
y ENCODING FORMAT
Select the encoding format of the CA certification file.
y [CA CERTIFICATE]
Press this to enter the file name of the CA certification file that you install in the equipment using TopAccess. If the
specified certification file is not installed in the equipment, the error message to input correct file name will be
displayed.
When pressing the [CA CERTIFICATE], the letter entry screen is displayed. Enter the value using the keyboard
and digital keys, and press the [OK] to set the entry.
28 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
5
y FULL AGREEMENT of SERVER NAME
Select the [ON] to confirm whether the RADIUS server name in the server certification file and the input RADIUS
server name is same or not. When the [ON] button is selected, press the [RADIUS SERVER NAME] to enter the
RADIUS server name.
In the RADIUS SERVER NAME, enter the user name in “Server Name@FQDN” format.
Example: [email protected]
y ENCRYPTION INTENSITY
Select the encryption intensity. When the PEAP protocol is selected, only [LOW] can be selected.
Specify the following items and press the [NEXT].
6
y ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.
The encryption intensity between each encryption is:
AES(CCMP) > TKIP
Setting Up the Infrastructure Mode 29
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
7
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
y TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
Confirm the settings and press the [FINISH].
8
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
9
The wireless settings apply after restarting the equipment.
30 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
‰ Selecting WPAPSK/WPA2PSK security mode
The WPAPSK/WPA2PSK is an authentication method using the PSK (Pre-Shared Key) between the Access Point and
other wireless devices.
To access the wireless network using the WPAPSK/WPA2PSK authentication, the same PSK Path Phrase must be
assigned in both the Access Point and other wireless devices. If the PSKs are same between the Access Point and other
wireless devices, the Access Point allows them to access the wireless network through the Access Point.
Press the [WPAPSK] or [WPA2PSK] and press the [NEXT].
1
The WIRELESS ENCRYPTION WPA-PSK screen is displayed.
Enter the following items and press the [NEXT].
2
y WIRELESS ENCRYPTION TYPE
Select the encryption type for the PSK.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
y [PSK PASS PHRASE]
Press this to enter the PSK Pass Phrase. The PSK is created by using the this pass phrase. You must enter the
same pass phrase that is set in the Access Point. The PSK Pass Phrase must be between 8 to 63 characters long.
When pressing the [PSK PASS PHRASE], the letter entry screen is displayed. Enter the value using the
keyboard and digital keys, and press the [OK] to set the entry.
Setting Up the Infrastructure Mode 31
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
3
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
y TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
Confirm the settings and press the [FINISH].
4
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
5
The wireless settings apply after restarting the equipment.
32 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
‰ Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.
Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the
Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/
WPA2 or WPAPSK/WPA2PSK rather than WEP.
Press the [WEP] button and press the [NEXT].
1
The WIRELESS ENCRYPTION - WEP screen is displayed.
Enter the following items and press the [NEXT].
2
y WEP ENCRYPTION
Select the bit length of the WEP key.
y KEY ENTRY METHOD
Select the character code for the WEP key.
y [WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
64 bit
128 bit
152 bit
HEX:
10
26
32
ASCII:
5
13
16
When pressing the [WEP], the letter entry screen is displayed. Enter the value using the keyboard and digital
keys, and press the [OK] to set the entry.
Setting Up the Infrastructure Mode 33
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
3
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
y TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
Confirm the settings and press the [FINISH].
4
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
5
The wireless settings apply after restarting the equipment.
34 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
‰ Selecting no security mode
You can also set no security for wireless access.
If you do not set no security, anyone how knows the SSID can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
Press the [NONE] and press the [NEXT].
1
The TRANSMIT POWER and RATE SETTING screen is displayed.
Specify the following items and press the [NEXT].
2
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
y TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.
Setting Up the Infrastructure Mode 35
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Confirm the settings and press the [FINISH].
3
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
4
The wireless settings apply after restarting the equipment.
36 Setting Up the Infrastructure Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Setting up the Ad Hoc Mode
The wireless settings can be operated from the Control Panel of this equipment.
When setting up the equipment for the wireless network in the Infrastructure Mode, follow the steps below.
1. Select the network type
2. Specify the SSID
3. Select the security mode
„ Select network type
First access the WIRELESS SETTING screen from the ADMIN menu from the Touch Panel Display to select the network
type for the wireless network.
If you are not sure what network type to select, see the following section to determine the network type first.
Press the [USER FUNCTIONS] button on the control panel to enter the User Functions
menu.
1
Press the [ADMIN].
The ADMINISTRATOR PASSWORD screen is displayed.
2
Press the [PASSWORD].
3
The input screen is displayed.
Enter the administrator password and press the [OK].
4
The ADMIN menu is displayed.
Setting up the Ad Hoc Mode 37
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Press the [WIRELESS SETTINGS].
5
6
7
The WIRELESS SETTINGS menu is displayed.
Press the [WIRELESS SETTINGS].
The WIRELESS SETTINGS screen is displayed.
Press the [ON] and press the [NEXT].
The NETWORK TYPE screen is displayed.
38 Setting up the Ad Hoc Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Press the [AD HOC] and press the [NEXT].
8
You can specify the between 1 to 11 for the channel. However, if there is a channel that has already been used
for Ad Hoc network, use the same channel.
The SSID SETTINGS screen displayed.
9
Continue to the procedure for specifying the SSID.
Setting up the Ad Hoc Mode 39
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
„ Specify SSID
When you select the Ad Hoc Mode for the network type, you can specify the SSID by entering the SSID manually.
If you are not sure how the SSID must be specified, see the following section to determine the SSID.
Press the [SSID].
1
The letter entry screen is displayed.
Enter the SSID using the keyboard and digital keys and press the [ENTER] button.
2
The screen returns to the SSID SETTINGS screen.
Press the [NEXT].
3
40 Setting up the Ad Hoc Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
The WIRELESS LAN SECURITY SETTINGS screen is displayed.
4
Continue to the procedure for specifying the security mode.
Setting up the Ad Hoc Mode 41
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
„ Select security mode
After specifying the SSID, you must select the security mode for your wireless network.
The procedure to configure the security mode varies depending on the security mode that you select.
y If the Ad Hoc Mode, only WEP or NONE can be selected for the security mode.
y If you are not sure what security mode to select, see the following section to determine the security mode.
‰ Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.
Press the [WEP] and press the [NEXT].
1
The WIRELESS ENCRYPTION - WEP screen is displayed.
Enter the following items and press the [NEXT].
2
y WEP ENCRYPTION
Select the bit length of the WEP key.
y KEY ENTRY METHOD
Select the character code for the WEP key.
y [WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
64 bit
128 bit
152 bit
HEX:
10
26
32
ASCII:
5
13
16
When pressing the [WEP KEY button, the letter entry screen is displayed. Enter the value using the keyboard
and digital keys, and press the [OK] to set the entry.
42 Setting up the Ad Hoc Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Select the transmit power and press the [NEXT].
3
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
Confirm the settings and press the [FINISH].
4
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
Press the [YES] to shutdown the equipment.
5
The wireless settings apply after restarting the equipment.
Setting up the Ad Hoc Mode 43
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
‰ Selecting no security mode
You can also set no security for wireless access.
If you do not set no security, anyone how knows the SSID can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
Press the [NONE] and press the [NEXT].
1
The TRANSMIT POWER and RATE SETTING screen is displayed.
Select the transmit power and press the [NEXT] button.
2
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
Confirm the settings and press the [FINISH] button.
3
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
44 Setting up the Ad Hoc Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Press the [YES] to shutdown the equipment.
4
The wireless settings apply after restarting the equipment.
Setting up the Ad Hoc Mode 45
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
Disabling Wireless Network
When you enable the wireless network, the on-board NIC (Network Interface Card) will be disabled.
If you want to connect the equipment to wired network via the on-board NIC, you must disable the wireless network.
Press the [USER FUNCTIONS] button on the control panel to enter the User Functions
menu.
1
Press the [ADMIN].
The ADMINISTRATOR PASSWORD screen is displayed.
2
Press the [PASSWORD] button.
3
The input screen is displayed.
Enter the administrator password and press the [OK].
4
The ADMIN menu is displayed.
Press the [WIRELESS SETTINGS].
5
The WIRELESS SETTINGS menu is displayed.
46 Disabling Wireless Network
Download from Www.Somanuals.com. All Manuals Search And Download.
1 SETTING UP WIRELESS NETWORK
1.SETTING UP WIRELESS NETWORK
Press the [WIRELESS SETTINGS].
6
The WIRELESS SETTINGS screen is displayed.
Press the [OFF] and press the [NEXT].
7
The NETWORK TYPE screen is displayed.
Press the [FINISH].
8
9
The shutdown screen is displayed.
Press the [YES] to shutdown the equipment.
The wireless settings apply after restarting the equipment.
Disabling Wireless Network 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
APPENDIX
This chapter describes the specification and glossary of terms.
Specification........................................................................................................................... 50
Glossary.................................................................................................................................. 52
Download from Www.Somanuals.com. All Manuals Search And Download.
2 APPENDIX
Specification
Item
Description
Transmission Format
IEEE 1802.11g standard
Direct Sequence Spread Spectrum (DSSS)
Orthogonal Frequency Division Multiplexing (OFDM)
Data Transmission Speed
Access Method
Transmission Packet
Wireless Category
Aerial Power
54, 24, 11, 5.5, 2, 1 Mbps (fixed/automatic)
CSMA/CA
IEEE 802.11g frame
Low-power data transmission system (2400 to 2472 MHz)
10 mW/MHz or below
Security
Static WEP
Key Length: 64 bit, 128 bit, 152 bit
WPA/WPA2: PSK (TKIP, AES(CCMP))
WPA/WPA2: TLS/PEAP (TKIP, AES(CCMP))
PMK Cache 2 (Two access point PMK can be cached when WPA2 is selected.)
*1 Supported RADIUS server
Steel-belted Radius
Windows Server 2000/Windows Server 2003
*2 Supported RADIUS server
Windows Server 2000/Windows Server 2003
Operation Mode
Wireless ON/OFF
Infrastructure Mode, Ad Hoc Mode
Available
Wired LAN/Wireless LAN
Simultaneous Operation
Not Available
Wireless LAN/Bluetooth
Simultaneous Operation
Available
50 Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
2 APPENDIX
Troubleshooting
When Error Messages are Displayed
If any error messages are displayed on the touch panel, see the following table to troubleshoot the problems for the
Wireless LAN.
Error Message
Bad certificate
Troubleshooting
Unsupported certificate is installed. Reinstall the appropriate certificate. This
equipment supports md5RSA and sha1RSA certificate only.
Bad record mac
SSL Key exchange failed. Turn the power OFF and then ON to restart the
equipment.
Certificate expired
The certificate has been expired. Make sure that the time is set correctly or
whether the certificate is expired.
Certificate revoke
The certificate has been revoked. Ask your network administrator.
Certificate unknown
The installed CA certificate cannot work as server certificate. Make sure to install
a correct CA certificate.
Decompression failure
Handshake failure
Illegal parameter
This equipment does not support the SSL compression. Please disable the SSL
compression on the RADIUS server.
Unsupported encryption may be set on the server. Make sure to use the
supported encryption method.
Unsupported version of the TLS protocol may be used. Make sure to use the
supported version of the TLS protocol.
No certificate
No certificate is installed or you do not specify the certificate file name. Make
sure to install the certificate and specify the certificate file name correctly.
Peer error certificate
Peer error no certificate
Peer no cipher
Installed CA certificate cannot verify the server certificate in the RADIUS server.
Make sure to install a correct CA certificate.
The RADIUS server operates the communication with the certificate using the
TLS protocol.
The RADIUS server requests the unsupported encryption for this equipment.
This equipment uses the certificate that the RADIUS server does not support.
Peer error unsupported certificate
type
Peer unexpected message
The RADIUS server sends the message that is not TLS standard. Confirm the
settings on the RADIUS server.
Unknown remote error type
Unsupported certificate
Unknown ca
The RADIUS server sends the alert message of illegal TLS.
This equipment uses the certificate that the RADIUS server does not support.
Installed CA certificate cannot verify the server certificate in the RADIUS server.
Make sure to install a correct CA certificate.
Unable to connect
Ask the administrator.
When Cannot Connect to TOSHIBA MFP
When you cannot connect to this equipment, reboot it *. If you still cannot, check the following requirements:
y The user certificate is not expired.
y The access point settings and network settings are correctly set.
*
Press and hold the [POWER] button for at least 1 second to shutdown the equipment and then press it again.
Troubleshooting 51
Download from Www.Somanuals.com. All Manuals Search And Download.
2 APPENDIX
Glossary
Ad hoc mode
A type of network for wireless LAN communications. In this mode a network is easily built because no access point is
required. However, this mode is not available for multiple simultaneous communications due to its poor extensibility; in
other words, it is unsuitable for wireless LAN communication connecting many devices.
AP (Access Point)
Stands for Access Point. Access points are required to relay terminals for a communication in the Infrastructure mode,
explained later in this section.
Channel
A segment for 2.4 GHz frequency bandwidth for wireless LAN communications. When more than one access point exists
in a narrow area in the Infrastructure mode, different channels are required for each in order to avoid radio wave
interference. Communications among devices with different channels are not available even if their SSIDs (explained later
in this section) are the same.
CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance)
A type of access controlling method for wireless LAN communications. In this method terminals constantly monitor their
communication status with each other. When one terminal is communicating, others stop their communications and wait
until they confirm that an available access route comes up, in order to avoid the collision of communication signals as
much as possible.
DSSS (Direct Sequence Spread Spectrum)
A type of signal transmission system for wireless LAN communications. As one of the characteristics of this system, less
noise occurs during communication and thus DSSS communication interferes with other communications less, because
signals are spread to a wide spectrum with a small amount of electric power. Also this system uses the Pseudo Noise
Code for the modulation and demodulation of signals, so a confidential communication with less risk of being intercepted
is available.
IEEE (Institute of Electrical and Electronics Engineers)
An organization that promotes studies for electronic related fields. The major activities of IEEE are holding academic
conferences and publishing technical papers. Also its internal committees establish and recommend technical standards.
The IEEE802 LAN/MAN Standard Committee of IEEE is in charge of technical standards for wireless LAN
communications.
IEEE802.11b / IEEE802.11g
Technical standards established by IEEE for wireless LAN communications with a 2.4 GHz frequency bandwidth.
Infrastructure mode
A type of network for wireless LAN communications. This mode is suitable for a wireless LAN communication connecting
more than one device because a simultaneous communication among these devices is available by installing access
points. Also interface ports embedded in each access point can extend the range of communication by integrating wireless
LAN and wired LAN.
OFDM (Orthogonal Frequency Division Multiplexing)
A type of communication system for wireless LAN communications. This is one of the multi-carrier systems that transmits
signals through multiple carriers with different center frequencies and makes these carriers orthogonal so that they will not
interfere each other, and thus efficient communications will be available within a narrow bandwidth.
PMK (Pairwise Master Key) cache
A function to cache PMKs, base information for encryption keys, to multiple access points. By caching the PMKs, the
period of time for authentication is greatly reduced for a terminal which once succeeded its authentication. Therefore in a
case in which an access point is switched during communication due to the movement of a terminal, for example, the
period for which the communication is paused will be minimized.
PSK (Pre-Shared Key) passphrase
“PSK” is a preset encryption key shared with terminals and “passphrase” is a character string required for PSK
authentication. A passphrase consists of a number of words (phrase), while a general password is only a short single
word. This means passphrases have a stronger tolerance toward security invasion than passwords.
RADIUS (Remote Authentication Dial In User Service)
A protocol for network service authentication. This protocol originally developed for authentication for dial-up connections
is now used for authentications for various network services. The RADIUS server is an authentication server supporting
RADIUS protocols. This server efficiently controls access to a network because the authentication information of network
users and their accessing statuses are centrally controlled.
52 Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
2 APPENDIX
2.APPENDIX
SSID (Service Set ID)
A network ID for wireless LAN communications. To identify terminals or access points that belong to the same wireless
LAN network, the same SSID must be set for each device. Communications among devices with different SSIDs are not
available.
Glossary 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
C
E
F
I
INFRASTRUCTURE ..................................................17
K
N
P
T
U
W
INDEX 55
Download from Www.Somanuals.com. All Manuals Search And Download.
56 INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
GN-1050
OME080038D0
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTIFUNCTIONAL DIGITAL SYSTEMS
Operator’s Manual for Wireless LAN Module
GN-1050
2-17-2, HIGASHIGOTANDA, SHINAGAWA-KU, TOKYO, 141-8664, JAPAN
R071220F2104-TTEC
Ver04 2009-12
©2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
|