Programmable Controllers
GATEWAY
Protocol Converters for Toshiba PLCs
Temperature
Controllers
Motor
Protection
Relays
GATEWAY with Toshiba T1-40 PLC
CAN WE TALK?
Everyone Always Wants to Know
What Everyone Else is Doing
Higher Level Controller
Adjustable
Speed Drives
Computer
DCS
PLC
Don’t Let Anyone Work Alone!
Download from Www.Somanuals.com. All Manuals Search And Download.
♦ Gateway Modes
There are two communications ports on the Gateway, labeled PLC1 and PLC2. Each port can be
configured for either RS232 or RS485 operation. Gateway can communicate through either the T-Series
RS232 programming port or the RS485 computer link port.
♦ Gateway Setup
Gateway is setup using simple MS Windows setup software. The software allows devices/registers from
one device to be mapped to devices/registers of the other device. For Modbus, the 400001 numbered
holding registers can be mapped directly to D data registers in the Toshiba PLC.
In the above example, 5 data registers in the T1 PLC starting at D101 are written into PID controller
modbus registers starting with holding register 400001. 3 Holding registers in the PID controller are
written into the data registers of the T1 starting at D0 (D0 –D2). It is also possible to control the priority
and frequency of the data transfer using the Gateway setup software.
♦ Specifications
Power Supply:
24 VDC +/- 5 % (50 ma MAX.) No Fuse inside
5 VDC +/- 5 % FROM PLC (120 ma MAX.)
Two ports as follows:
Communication:
Com 1: RS232C/RS485
Com 2: RS232C/RS485
Status LEDs:
PLC1 LED
STATUS LED
PLC2 LED
Temperature:
Humidity:
Immunity to ESD:
Immunity to Transients:
Radiated Susceptibility:
Emissions:
Operating: 0 to 60 °C Storage: - 40 to 90 °C
10% to 90% (Non condensing)
Level 3 as per IEC1000-4-2
Level 3 as per IEC1000-4-4
Level 3 as per IEC1000-4-3
EN55011 CISPR A
Dimensions:
97mm(W) X 15.mm (H) X 42mm(D) DIN RAIL mounting
available
Weight:
100 gm Approx.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
♦ Dimensions
Mounting is via Din Rail or Through Hole
Part Number
Description
GWY-02
Gateway Protocol Converter, RS232/RS485, Powered from PLC, includes 50cm
cable for connection to T1 programming port.
GWY-08
Gateway Protocol Converter, RS485/RS485, Requires 24 Vdc Power.
RS232 to RS422/RS485 Converter, 2 wire / 4 wire.
Y Cable, Connects Gateway to T1 and PC for downloading Gateway Program.
Y Cable, Connects Gateway to T2 and PC for downloading Gateway Program.
Cable, Connects Gateway to T1 programming port, 2m.
CNV-01-02-2-0
SC-Y-019A-00
SC-Y-019A-00
SC-G-019A-00
SC-G-019B-00
Cable, Connects Gateway to T2 programming port, 2m.
ADJUSTABLE SPEED DRIVES MOTORS CONTROLS UPS INSTRUMENTATION PLC DCS
Available Through:
INTERNATIONAL CORPORATION
13131 West Little York Rd Houston, TX 77041
Ph: 713-466-0277
Fax: 713-466-8773
US: 800-231-1412 Canada: 800-872-2192 Mexico: 001-800-527-1204
Rev 2003.5.1
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|