Toshiba Laptop A25 User Manual

Satellite^®A20/A25 Series

Resource Guide

Keep this guide in a convenient place to access important

information about your computer.

If you need assistance, contact the following:



InTouch Center

Calling within the United States (800) 457-7777

Calling from outside the United States (949) 859-4273

Please fill in for your reference and future use:

Model name _______________________________________

Model number _______________________________________

Serial number ______________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

Welcome to the world of powerful and portable multimedia computers!

With your new Toshiba notebook computer, your access to information can

accompany you wherever you go.

You will find that the Microsoft^®Windows^®XP operating system is

already installed on your computer. It offers exciting features and easy

Internet access.

This guide

This guide offers important information about your computer, including

solutions to the most common problems, and features and specifications.

For more detailed information, descriptions of other features and more

extensive troubleshooting guidelines, see the electronic user’s guide

preinstalled on your system. It is also available on the Web at

pcsupport.toshiba.com.

Safety icons

This guide contains safety instructions that must be observed in order to

avoid potential hazards that could result in personal injuries, damage to

your equipment, or loss of data. These safety cautions have been classified

according to the seriousness of the risk, and the icons highlight these

instructions as follows:

Danger indicates a hazardous situation, which will result in death, serious

personal injury, or substantial property damage if the safety instruction is

ignored.

DANGER

Warning indicates a hazardous situation, which can result in death, serious

personal injury, or substantial property damage if the safety instruction is

ignored.

Caution indicates a hazardous situation, which will or can cause minor

personal injury or property damage if the safety instruction is ignored.

Provides you with important but not hazard-related information.

Other icons used

Additional icons highlight other helpful or educational information:

TECHNICAL NOTE: This icon highlights technical information about the

computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

HINT: This icon denotes helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the text.

Other documentation

Your computer comes with all or some of the following documentation in

addition to this resource guide:

❖

Electronic user’s guide installed on your system.

Guides for other software that may come preinstalled.

Microsoft^®Windows^®XP operating system documentation.

For accessory information, visit Toshiba’s Web site at toshiba.com.

The Recovery Media containing the programs that are preinstalled at

the factory and any bundled software. Keep this media in a safe and

convenient place.

Setting up your computer and getting started

Strain and stress injuries are becoming more common as people spend

more time using their computers. With a little care and proper use of the

equipment, you can work comfortably throughout the day.

Using the computer keyboard incorrectly can result in discomfort and

possible injury. If your hands, wrists, and/or arms bother you while typing,

stop using the computer and rest. If the discomfort persists, consult a

physician.

For more information, consult books on ergonomics, repetitive-strain

injury, and repetitive-stress syndrome.

Placement of the computer

Proper placement of the computer and external devices is important to

avoid stress-related injuries. Consider the following when placing your

computer.

❖

Place the computer on a flat surface at a comfortable height and

distance. You should be able to type without twisting your torso or

neck, and look at the screen without slouching.

❖

If you are using an external monitor, the top of the display should be

no higher than eye level.

If you use a paper holder, set it at about the same height and distance

as the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

Seating and posture

When using your computer, maintain good posture with your body relaxed

and your weight distributed evenly. Proper seating is a primary factor in

reducing work strain.

Precautions

Your notebook computer is designed to provide optimum safety and ease of

use, and to withstand the rigors of travel. You should observe certain

precautions to further reduce the risk of personal injury or damage to the

computer.

Never apply heavy pressure to the computer or subject it to sharp impacts.

Excessive pressure or impact can damage computer components or

otherwise cause your computer to malfunction.

Some PC Cards become hot with prolonged use. Overheating of a PC Card

can result in errors or instability in its operation.

Be careful when you remove a PC Card that has been used for lengthy

periods of time.

Connecting to a power source

Your computer requires power to operate. Use the power cable and AC

adapter to connect the computer to a live electrical outlet, or to charge the

computer’s battery.

Power cable

AC adapter

Power Cable and AC adapter

Use only the AC adapter supplied with your computer or an equivalent

adapter that is compatible. Use of any incompatible adapter could damage

your computer. Toshiba assumes no liability for any damage caused by use

of an incompatible adapter.

When you connect the AC adapter to the computer, always follow the steps in

the exact order as described in the User's Manual. Connecting the power

cable to a live electrical outlet should be the last step otherwise the adapter

DC output plug could hold an electrical charge and cause an electrical shock

or minor bodily injury when touched. As a general safety precaution, avoid

touching any metal parts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

Hold the power cable by its plug when you connect/disconnect it. Do NOT

pull the cable itself. Doing so may damage the power cable and result in a

short circuit or electric shock.

DANGER

The power cord on this product contains lead, a chemical known to

the State of California to cause birth defects or other reproductive

harm. Wash hands after handling.

To connect AC power to the computer:

Connect the power cable to the AC adapter.

Plug the AC adapter into the DC-IN on the back of the computer.

Connect the power cable to a live electrical outlet.

If the electrical outlet is live, the system indicator panel’s AC power light

) glows green.

(

Damaged power cables can cause fire or electric shock. Never modify,

forcibly bend, place heavy objects on top of, or apply heat to the power

cable.

DANGER

If the power cable becomes damaged or the plug overheats, discontinue use.

There is a risk of electric shock.

Never remove the power plug from the outlet with wet hands. Doing so may

cause an electric shock.

Connecting a printer

You can connect a USB-compatible printer to your computer through a

USB port. You can also connect a parallel printer through the parallel port.

To confirm a printer’s compatibility, check its documentation.

Connecting a USB printer

To achieve the connection, you need a suitable USB cable, which may

come with your printer. Otherwise, you can purchase one from a computer

or electronics store.

Follow the manufacturer’s instructions for connecting a USB printer to your

computer.

Connecting a parallel printer

To achieve the connection, you need a suitable cable, which may come with

your parallel printer. Otherwise, you can purchase one from a computer or

electronics store.

If you connect a parallel printer, do so before you turn on the computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

Follow the manufacturer’s instructions for connecting a parallel printer to

your computer.

Installing additional memory (optional)

Before you install or remove a memory module, turn off the computer using

the Start menu. If you install or remove a memory module while the

computer is in Standby or Hibernation mode, data will be lost.

A memory module must be installed in slot A. Do not try to operate the

computer with a memory module in slot B only.

Your computer is equipped with two memory slots which can provide for

various memory configurations. When additional memory is added, or

original memory replaced, it is recommended that you use only compatible

memory. In the event original memory is replaced with invalid memory, the

system will beep and will not start up beyond the BIOS memory check. A

message will display. If this occurs, contact Toshiba’s support center. See

“Toshiba voice contact” on page 27.

HINT: To purchase additional memory modules, visit the Toshiba Web site at

toshiba.com.

Your computer comes with enough memory to run most of today’s popular

applications. You may want to increase the computer’s memory if you use

complex software or process large amounts of data.

There are two memory slots. Your system may have both slots occupied.

If you use the computer for a long time, the memory modules will become

hot. If this happens, let the modules cool to room temperature before you

replace them.

Do not try to install a memory module under the following conditions. You

can damage the computer and the module.

1. The computer is turned on.

2. The computer was shut down using Standby mode.

3. Power to the DVD-ROM or multi-function drive has been turned on.

Do not install or remove a memory module while the DVD-ROM or multi-

function drive power is on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

You will need a standard Phillips No.1 screwdriver and a small flat head

screwdriver to install a memory module.

To avoid damaging the computer’s screws, use a standard Phillips

screwdriver that is in good condition.

If the computer is on, turn it off.

See “Turn Off or Shut down command” in your electronic user’s

guide.

Unplug and remove any cables connected to the computer.

Open the display panel and remove the panel above the keyboard that

contains the power button.

When removing the computer’s power button panel to install additional

memory, be careful not to damage the display or circuit board.

Using a flat-head screwdriver to pry off the panel

You can pry the panel out of its position by using a flat-head

screwdriver. Starting at the left or right side, carefully wedge the flat-

head screwdriver between the panel and the surrounding housing.

Grasp the end of the panel and lift up until the panel comes free.

Remove the three screws that hold the keyboard in place, and remove

the keyboard retaining brace.

Removing the left keyboard screw

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

The two-inch-long, propeller-shaped brace sits in the center of the

area exposed when the panel is removed.

Observe how the propeller-shaped keyboard retaining brace is positioned

before you remove it.

Store the brace with the screws for safekeeping.

Removing the right keyboard screw

Lift the keyboard and gently place it face down on the palm rest of the

computer.

Lifting the keyboard

Removing the keyboard exposes the two memory slots, which are

covered by a plastic sheet.

Covered memory slots

Locating the covered memory module slots

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

Lift (but do not detach) the plastic sheet to expose the memory slots.

Lifting the plastic covering the memory slots

Remove the new memory module from its antistatic packaging.

Static electricity can damage the memory module. Before you handle the

module, touch a grounded metal surface to discharge any static electricity

you may have built up.

To avoid damaging the memory module, be careful not to touch its pin

connector (on the side you insert into the computer).

Avoid touching the connectors on the memory module or on the computer.

Grease or dust on the connectors may cause memory access problems.

Insert the memory module in a slot and gently press it down into

place.

Inserting the memory module

The clips on either side of the module will click to secure the module.

Cover the slots with the plastic sheet.

10 Replace the keyboard.

To secure the keyboard, fit the tabs at the bottom of the keyboard into

the corresponding slots at the top of the computer’s palm rest.

11 Fasten the keyboard with the keyboard retaining brace and screws.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

12 Replace the panel above the keyboard by doing the following:

❖

Fit the tabs at the bottom of the panel into corresponding slots at

the top of the keyboard.

❖

Fit the tabs at the top of the panel into corresponding slots at the

base of the display and gently push down.

When the panel is properly positioned, it will snap down into place.

13 Reconnect any cables you removed.

14 Turn on the computer.

To verify that the computer correctly recognizes the memory, see

“Checking total memory” on page 12.

15 If the computer does not recognize the memory, shut down the

computer, remove the memory slot cover, and make sure the memory

module is seated properly, as described in step 8.

Removing a memory module

If you use the computer for a long time, the memory modules will become

hot. If this happens, let the modules cool to room temperature before you

replace them.

Do not try to remove a memory module with the computer turned on. You

can damage the computer and the device.

Do not remove the memory module while the computer is in Standby mode.

The computer could hang up the next time you turn it on and data in memory

will be lost. In either of the above cases, the Standby configuration will not

be saved.

The following message appears when you turn on the power:

Warning: Resume Failure

Press Any Key To Continue

If the computer hangs up when you turn it on, perform the following: Press

the power button and hold it down for five seconds, then turn the power on

again.

Follow steps 1 through 6 in “Installing additional memory (optional)”

on page 7.

Pull the clips away from the memory module.

The memory module pops partially out of the slot.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up your computer and getting started

Pulling the clips away from the memory module

Carefully remove the module from the slot.

Static electricity can damage the memory module. Before you handle the

module, touch a grounded metal surface to discharge any static electricity

you may have built up.

To avoid damaging the memory module, be careful not to touch its pin

connector (on the side you insert into the computer).

Avoid touching the connectors on the memory module or on the computer.

Grease or dust on the connectors may cause memory access problems.

Removing the memory module

Complete the procedure by following steps 9 through 14 in “Installing

additional memory (optional)” on page 7.

Checking total memory

When you add or remove memory, you can check that the computer has

recognized the change. To do this:

Click Start, Control Panel.

Click Performance and Maintenance.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your computer’s TFT display

Click System.

The General tab view automatically appears and shows the

recognized memory.

If the computer does not recognize the memory, turn off the computer,

remove the memory slot cover, and make sure the memory module is

seated properly, as described in “Installing additional memory

(optional)” on page 7.

Your computer’s TFT display

Small bright dots may appear on your TFT display when you turn on your

computer. Your display contains an extremely large number of thin-film

transistors (TFT) and is manufactured using high-precision technology.

Any small bright dots that may appear on your display are an intrinsic

characteristic of the TFT manufacturing technology.

Inserting a PC Card

Use caution when lifting or turning your computer. Failure to do so may

result in damage to components, such as cables, attached to your computer,

or to the computer itself.

Before you insert a PC Card, refer to the documentation that comes with

the card to see if you need to do anything before you insert it.

If your PC Card does not support hot swapping, save your data and

turn off the computer before inserting the PC Card. For more

information, see “Hot swapping a PC Card” on page 14.

Hold the PC Card with the arrow or main label side up and the

connector side toward the PC Card slot.

Align the card connectors with the PC Card slot and carefully slide the

card into the slot until it locks into place.

Inserting a PC Card

To avoid damaging the PC Card or the computer, do not force the card into

the PC Card slot.

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing a PC Card

Click the Safely Remove Hardware icon on the System tray.

Click Safely remove xxxx, where xxxx is the identifier for your PC

Card.

The operating system advises you that you may safely remove the

Card.

Press the PC Card eject button next to the PC Card slot to extend the

button.

Ejecting the PC Card

Press the extended eject button so the PC Card pops out slightly.

Remove the PC Card and store it properly.

Hot swapping a PC Card

One of the great things about PC Cards is that you can replace one PC Card

with another while the computer is on. This is called “hot swapping.”

Hot swapping precautions

Although you can insert a PC Card at any time, to avoid data loss never

remove a card while it is in use. For example:

❖

Never remove an ATA card while the system is accessing it.

Never remove a network card while you are connected to a network.

Never remove a SCSI card while any of the SCSI devices connected to

it are operating.

Before removing a PC Card, shut it down properly. See “Removing a PC

Card” on page 14.

Using SD cards

Your computer supports the use of SD (Secure Digital) memory/input/

output cards. The cards can be used with a variety of digital products:

digital music players, cellular phones, PDAs, digital cameras, digital video

camcorders, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Learning the basics

Inserting an SD card

MMC cards (multimedia cards) do not work in this slot.

Turn the card so that the metal contacts are face down.

Push the card into the slot until it locks in place.

Inserting an SD card

Removing an SD card

Click the Safely Remove Hardware icon on the System tray.

Click Safely remove xxxx, where xxxx is the identifier for your SD

card.

Press the card inward to release it.

The card pops out slightly.

Lift the side of the computer where the card is located, grasp the card,

and pull it straight out.

Learning the basics

Computing tips

❖

Save your work frequently.

Your work stays in the computer’s temporary memory until you save it

to the disk. You will lose all unsaved work, if, for example, a system

error occurs and you must restart your computer, or your battery runs

out of charge while you are working. Your computer can be

configured to warn you when the battery is running low.

HINT: Some programs have an automatic save feature that you can turn on.

This feature saves your file to the hard disk at preset intervals. See your

software documentation for details.

❖

Back up your files to diskettes (or other removable storage media) on

a regular basis. Label the backup copies clearly and store them in a

safe place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a CD or DVD

❖

Scan all new files for viruses.

Never turn off the computer if a drive indicator light indicates a drive

is active.

The Windows^®XP operating system records information, such as your

desktop setup, during its shutdown procedure. If you do not let the operating

system shut down normally, details such as new icon positions may be lost.

Using the TouchPad^TM

The TouchPad, the touch-sensitive cutout in front of the keyboard, enables

you to move the cursor by brushing your finger on the surface in the

direction you want the cursor to move. To move the cursor to the top of the

screen, move your finger on the TouchPad away from you. To move the

cursor to the bottom, do the opposite.

For more information on the TouchPad, see the electronic user’s guide.

Primary and secondary control buttons

When you want to click or choose an item, use the TouchPad to move the

pointer/cursor to the item. Once the pointer/cursor is positioned, you can

click it into place by either double-tapping the TouchPad or clicking the

control buttons.

The control buttons are adjacent to the TouchPad and are used like the

buttons on a mouse. The primary control button is the left one and

corresponds to the left mouse button. To double-click, press the primary

button twice in rapid succession.

The function of the secondary button depends on the program you are

using. It usually corresponds to the right mouse button. Check your

program’s documentation to find whether it uses the secondary mouse

button.

Playing a CD or DVD

Optical storage has become the preferred medium for software, music, and

video. Digital versatile discs (DVDs) provide a significant increase in data

storage and support features that are not available on any other video

platform. These features include wide-screen movies, multiple language

tracks, digital surround sound, multiple camera angles, and interactive

menus.

For these reasons, your computer may come with a DVD-ROM or

multi-function drive.

HINT: Your DVD-ROM or multi-function drive is designed to play region 1

(North America) DVD-ROMs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a CD or DVD

For optimum DVD performance, it is recommended that you play DVDs

while running the computer on AC power.

Drive components and control buttons

The DVD-ROM or multi-function drive is located on the side of the

computer. The CD/DVD control buttons are located at the front edge of the

computer and can be accessed when the display panel is closed or open.

Components

Manual eject button

Eject button

Sample DVD-ROM or multi-function drive shown

Use the eject button to release the disc tray. This button requires power to

operate.

Never press the eject button or turn off the computer while the disk/disc

activity light is flashing. Doing so could damage the disc or the drive.

The manual eject button allows you to manually open the disc tray when

power to the computer and the drive is off.

Never use a pencil to press the manual eject button. Pencil lead can break off

inside the computer and damage it. Instead, use a slim object such as a

straightened paper clip.

Inserting a disc

Before playing an audio CD or a DVD, turn down the volume. Playing the

disc at maximum volume could damage your ears. To turn down the volume,

use the volume control dial or access the Volume Control program (click

Start, All Programs, Accessories, Entertainment, Volume

Control).

If the computer is turned on, press the eject button on the DVD-ROM

or multi-function drive.

The disc tray partially opens.

To avoid damaging a disc or losing data, check that the Disk/disc activity

light is off before opening the disc tray.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a CD or DVD

Grasp the disc tray and pull it fully open.

Hold the disc by its edges and check that it is clean and free of dust.

Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its

center hole and edge. If you handle the disc incorrectly, you could lose data.

Carefully place the disc in the empty tray with its label facing up.

Inserting a disc

Be careful not to touch the drive’s lens (located underneath the drive’s

spindle) or the area around it. Doing so could cause the drive to malfunction.

Gently press the center of the disc onto the spindle until it locks.

Make sure the disc is properly positioned on the spindle. If you position the

disc incorrectly, it can jam the disc tray.

Close the disc tray by pressing gently on the center of the tray until it

clicks, indicating that it is locked.

Removing a disc with the computer on

Never press the eject button while the computer is accessing the drive. Wait

for the disk/disc activity light on the system indicator panel to turn off before

opening the disc tray.

Locate and press the eject button.

The disc tray partially opens.

Grasp the sides of the disc tray and pull it fully open.

Remove the disc from the disc tray and place it in its protective cover.

If the disc is spinning when you open the disc tray, wait for the disc to stop

before removing it.

Close the disc tray by pressing gently on the center of the tray until it

clicks indicating that it is locked.

Download from Www.Somanuals.com. All Manuals Search And Download.

Moving the computer

Removing a disc with the computer off

Insert a slender object, such as a straightened paper clip, into the

manual eject button access hole.

Never use a pencil to press the manual eject button. Pencil lead can break off

inside the computer and damage it.

Pull the tray fully open, remove the disc and place it in its protective

cover.

Close the disc tray by pressing gently on the center of the tray until it

clicks indicating it is locked.

Moving the computer

Before moving your computer, even across the room, make sure all disk

activity has ended (the drive-in-use lights stop flashing) and all external

peripheral cables are disconnected.

Never pick up the computer by its display panel or by the back (where the

ports are located).

Mobile computing

Running the computer on battery power

The computer contains a removable lithium ion (Li-ion) high-capacity

battery that provides power when you are away from an AC outlet. You can

recharge it many times.

To ensure that the battery maintains its maximum capacity, operate the

computer on battery power at least once a month until the battery is fully

discharged. Please see “Maximizing battery life” on page 23 for

procedures. If the computer is continuously operated on AC power, either

through an AC adapter or a docking station for an extended period (more

than a month), the battery may fail to retain a charge. It may not function

efficiently over the expected life of the battery and the battery light may not

indicate a low-battery condition.

Monitoring battery power

The battery light indicates the main battery’s current charge. It:

❖

Glows green when the battery is fully charged

Glows amber while the battery is being charged

Download from Www.Somanuals.com. All Manuals Search And Download.

Mobile computing

❖

Does not glow if the external power source is disconnected or if the

battery is completely discharged

TECHNICAL NOTE: The computer drains the battery faster at low

temperatures. Check your remaining charge frequently if you are working in

temperatures below 50 degrees Fahrenheit.

The computer calculates the remaining battery charge based on your current

rate of power use and other factors such as the age of the battery.

Setting battery alarms

Your computer can be configured to warn you when the battery is running

low. For more information, see “Setting battery alarms” in the electronic

user’s guide.

Changing the main battery

When your battery power is running low, you have two options: connect the

computer to an AC power source or install a charged battery.

If your battery discharges fully, your information will be lost. Be sure to save

your work often.

When handling a battery, be careful not to drop it or short-circuit its

terminals. Also, do not drop, hit or otherwise impact the battery. Do not

scratch or break the casing and do not twist or bend the battery.

Do not remove the battery while the computer is in Standby mode. Data in

memory will be lost.

Removing the battery from the computer

Save your work.

Turn off the computer via the Start menu.

See “Using Turn Off or Shut down” in your electronic user’s guide.

Remove all cables connected to the computer.

Close the display panel and turn the computer upside down.

Move the battery lock lever toward the front of the computer in order

to move the battery release latch.

Download from Www.Somanuals.com. All Manuals Search And Download.

Mobile computing

Battery lock lever

Moving the battery lock lever

Slide the battery release latch to free the battery, then firmly pull the

battery toward yourself.

Battery release latch

Sliding the battery release latch

Removing the battery

If the battery is leaking or its case is cracked, put on protective gloves to

handle it, and discard it immediately following the advice in “Disposing of

used batteries safely” in the electronic user’s guide.

For environmental reasons, do not throw away a spent battery. Please return

spent batteries to your Toshiba dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Mobile computing

Inserting a charged battery

Turn off the computer via the Start menu.

See “Using Turn Off or Shut down” in your electronic user’s guide.

Remove all cables connected to the computer.

Close the display panel and turn the computer upside down.

Insert the battery until it is level with the rest of the computer’s

underside

When the battery is properly secured, the battery release latch snaps

shut.

Move the battery lock lever toward the back of the computer to secure

the battery release latch.

Failure to lock the battery cover can result in the battery falling out of the

computer case.

Turn the computer right side up.

Reconnect any cables you removed.

Turn on the computer.

Battery safety precautions

❖

If the battery pack produces an odor, overheats or changes color or

shape while it is being used or charged, turn off the computer’s power

immediately and disconnect the power cord from the power socket.

Carefully remove the battery pack from the computer.

❖

Do not try to disassemble a battery pack.

Do not overcharge or reverse charge a battery. Overcharging will

shorten its life, and reverse charging could damage it.

❖

Avoid touching the metal terminals of the battery with another metal

object. Short-circuiting the battery can cause it to overheat and may

cause damage to the battery or the computer.

❖

Do not incinerate a spent battery, as this could cause it to explode and

release toxic materials.

If a battery is leaking or damaged, replace it immediately. Use

protective gloves when handling a damaged battery.

To replace the main battery, use an identical battery that you can

purchase through toshiba.com.

A reverse polarity condition should be avoided with all batteries. The

main battery is designed so that it cannot be installed to cause reverse

polarity.

❖

Charge the battery only in the computer or in a battery charger

designated as an approved option.

Download from Www.Somanuals.com. All Manuals Search And Download.

Mobile computing

❖

When you install the battery, you should hear a click when it is seated

properly.

Do not expose the battery to fire. The battery could explode.

Maximizing battery life

A main battery can be recharged many times. Battery life and charge time

vary depending on the applications, power management settings and

features used. To maximize the life of your battery:

❖

At least once a month, disconnect the computer from a power source

and operate it on battery power until the battery fully discharges.

Before doing so, follow the steps below:

Turn off the computer’s power.

Disconnect the AC adapter and turn on the computer’s power. If

it does not turn on, go to step 4.

Operate the computer on battery power for five minutes. If the

battery has at least five minutes of operating time, continue

operating until the battery is fully discharged. If the battery light

flashes or there is some other warning to indicate a low battery,

go to step 4.

Connect the AC adapter to the computer and the power cable to a

power outlet. The DC-IN (if applicable to your system) or AC

power light should glow green, and the battery light should glow

amber to indicate that the battery is being charged. If the DC-IN

or AC power light indicator does not glow, power is not being

supplied. Check the connections to the AC adapter and power

cable.

Charge the battery until the battery light glows green.

❖

If you have extra batteries, rotate their use.

If you will not be using the system for an extended period (more than

one month), remove the battery.

❖

Disconnect the AC adapter when the battery is fully charged.

Overcharging makes the battery hot and shortens life.

If you are not going to use the computer for more than eight hours,

disconnect the AC adapter.

Store spare batteries in a cool dry place out of direct sunlight.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important information on your Satellite® computer’s cooling fan

Important information on your Satellite^®computer’s

cooling fan

The CPU cooling fan on the underside of your Satellite computer cools the

CPU by drawing outside air into the computer.

To prevent possible overheating of the CPU, make sure the cooling fan's air

intake is not blocked. The fan draws in air by creating a vacuum. If the fan is

blocked, it could cause the CPU to run at a lower performance level or cause

the computer to shut down. Loose items such as notebook and tissue paper,

plastic wrappers, or other similar materials can block the air intake,

preventing air from reaching the CPU. Do not use the computer on surfaces

with objects that can be drawn in by the cooling fan.

CPU

cooling

fan

Underside of your Satellite computer

If something goes wrong

Problems that are easy to fix

Your program stops responding.

If you are working with a program that suddenly freezes all operations,

chances are the program has stopped responding. You can exit the failed

program without shutting down the operating system or closing other

programs.

To close a program that has stopped responding:

Press Ctrl, Alt, and Del simultaneously (once).

Click the Applications tab.

If a program has stopped responding, the words “not responding”

appear beside its name in the list.

Select the program you want to close, then click End Task.

Closing the failed program should allow you to continue working. If it

does not, continue with step 4.

Close the remaining programs one by one by selecting the program

name, then End Task.

Download from Www.Somanuals.com. All Manuals Search And Download.

If something goes wrong

Turn off your computer according to the instructions in “Turn Off or

Shut down command” in your electronic user’s guide.

Your program performs an illegal operation.

If you receive the message, “Your program has performed an illegal operation,”

you should record the details of the message and consult the software

manufacturer.

To record the details, click the Details button and copy the text the

operating system displays. The Details button displays information that the

software manufacturer needs to help you solve your problem.

Problems when you turn on the computer

These problems may occur when you turn on the power.

The computer will not start.

Make sure you attached the AC adapter and power cable properly or

installed a charged battery.

Press and hold down the power button until the on/off light changes to

green.

If you are using the AC adapter, check that the wall outlet is working by

plugging in another device, such as a lamp.

The computer starts but, when you press a key, nothing

happens.

You probably have a software or resource conflict. To clear the condition,

press Ctrl, Alt and Del simultaneously, then select Shutdown and Restart.

Clearing the condition may get the computer running, but it will not solve a

resource conflict. Read the documentation that came with the conflicting

device and “Resolving a hardware conflict” in the electronic user’s guide.

The keyboard produces unexpected characters.

A keypad overlay may be on. If the numeric keypad or cursor control light

is on, press Fn and F10 simultaneously to turn off the cursor control light or

press Fn and F11 simultaneously to turn off the numeric keypad light.

If the problem occurs when both the keypad overlays are off, make sure the

software you are using is not remapping the keyboard. Refer to the

software’s documentation and check that the program does not assign

different meanings to any of the keys.

Display problems

The display is blank.

Display Auto Off may be in effect. Press any key to activate the screen.

You may have activated the instant password feature by pressing Fn and F1

simultaneously.

If you have registered a password, press the Enter key, type the password

and press Enter. If no password is registered, press Enter. The screen

reactivates and allows you to continue working.

Download from Www.Somanuals.com. All Manuals Search And Download.

If something goes wrong

If you are using the built-in screen, make sure the display priority is not set

for an external monitor. To do this, hold down Fn and continue to press F5

until the display priority is not the external monitor.

Small bright dots appear on your TFT display when you turn

on your computer.

Your display contains an extremely large number of thin-film transistors

(TFT) and is manufactured using high-precision technology. The small

bright dots that appear on your display are an intrinsic characteristic of the

TFT manufacturing technology.

PC Card problems

PC Card checklist

❖

Make sure the card is inserted properly into the slot.

See “Using a PC Card” in the electronic user’s guide.

❖

Make sure all cables are securely connected.

Occasionally a defective PC Card slips through quality control. If

another PCMCIA-equipped computer is available, try the card in that

machine. If the card malfunctions again, it may be defective.

Here are some common problems and their solutions:

Resolving PC Card problems

The slot appears dead and cards that worked no longer do.

Check the PC Card status:

Click Start.

Click My Computer icon with the secondary button, then click

Properties.

The System Properties window appears.

Click the Hardware tab.

Click the Device Manager button.

Double-click the appropriate category for the PC Card being used.

Double-click the name of the PC Card device.

The operating system displays your PC Card’s Properties window,

which contains information about your PC Card configuration and

status.

The computer stops working (hangs) when you insert a PC

Card.

Remove the PC Card. If removing the PC Card does not resolve the

problem, try restarting the computer. If the computer still does not work,

contact the PC Card’s manufacturer.

Download from Www.Somanuals.com. All Manuals Search And Download.

If you need further assistance

If you have followed the recommendations in this chapter and are still

having problems, you may need additional technical assistance. This

section contains the steps to take to ask for help.

Before you call

Since some problems may be related to the operating system or the

program you are using, it is important to investigate other sources of

assistance first.

Try the following before contacting Toshiba:

❖

Review the troubleshooting information in your operating system

documentation.

❖

If the problem occurs while you are running a program, consult the

program’s documentation for troubleshooting suggestions. Contact

the software company’s technical support group for their assistance.

❖

Consult the dealer from whom you purchased your computer and/or

program. Your dealer is your best source for current information.

Detailed system specifications are available at www.ts.toshiba.com by

selecting your particular product and model number, clicking GO, and then

clicking the Detailed Specs link from the menu on the left. Or just refer to

the computer documentation shipped with your product.

For the number of a Toshiba dealer near you, see “Toshiba voice contact”

on page 27.

Contacting Toshiba

If you still need help and suspect that the problem is hardware-related,

Toshiba offers a variety of resources to help you.

Start with accessing Toshiba on the Internet using any Internet browser by

typing pcsupport.toshiba.com.

Toshiba voice contact

Before calling Toshiba, make sure you have:

❖

Your computer’s model and model number.

Your computer’s serial number.

The computer and any optional devices related to the problem.

Backup copies of your operating system and all other preloaded

software on diskettes or CD-ROM.

❖

Name and version of the program involved in the problem along with

its installation diskettes or CD-ROM.

❖

Information about what you were doing when the problem occurred.

Exact error messages and when they occurred.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power cable connectors

For technical support, call the Toshiba InTouch Center:

❖

Within the United States at (800) 457-7777

Outside the United States at (949) 859-4273

Power cable connectors

Your notebook computer features a universal power supply you can use

worldwide. This appendix shows the shapes of the typical AC power cable

connectors for various parts of the world.

USA and Canada

(UL and CSA

approved)

United Kingdom

(BS approved)

Australia

(AS approved)

Europe

(VDA and

NEMKO approved)

Features and specifications

This section lists the computer’s features.

Technology and processor

Microprocessor

Intel^®Pentium^®4 processor 2.53, 2.66, 2.80, 3.06 GHz,

1.475, 1.500, 1.525 V/core

CPU performance in your computer product may vary

from specifications under the following conditions:

- use of certain external peripheral products

- use of battery power instead of AC power

- use of certain multimedia games or videos with special

effects

- use of standard telephone lines or low speed network

connections

- use of complex modeling software, such as high end

computer aided design applications

- use of computer in areas with low air pressure (high

altitude >1,000 meters or >3,280 feet above sea level)

Download from Www.Somanuals.com. All Manuals Search And Download.

Features and specifications

- use of computer at temperatures outside the range of 5°C

to 35°C (41°F to 95°F) or >25°C (77°F) at high altitude

(all temperature references are approximate).

CPU performance may also vary from specifications due

to design configuration.

Under some conditions, your computer product may

automatically shut-down. This is a normal protective

feature designed to reduce the risk of lost data or damage

to the product when used outside recommended

conditions. To avoid risk of lost data, always make back-

up copies of data by periodically storing it on an external

storage medium. For optimum performance, use your

computer product only under recommended conditions.

Read additional restrictions under “Environmental

Conditions” in this document. Contact Toshiba Technical

Service and Support for more information.

Processor L1 cache

Processor L2 cache

12 KB write-back level one cache

512 KB on-chip write-back level two cache

Processor system bus 533 MHz PSB provides optimum speed for memory

access.

PCI bus

High performance 32-bit PCI system bus supports HDD

and PC Card slot

Memory

2.5-volt 64-bit bus, PC2100 DDR SDRAM, delivers high

performance, 2 SODIMM memory slots,

Memory modules available: 128 MB, 256 MB, 512 MB

Maximum capacity 1024 MB

Graphics

Trident CyberALADDiN-P4 64-bit graphics accelerator;

BitBLT hardware, Alpha-blending, Direct3D^®and

OpenGL^®support; 32 MB external DDR video memory

Power

Computer

90 watt autosensing external AC power adapter; 100-240

VAC input voltage, 50/60 Hz frequency, 15V output

voltage, 6.0 amps maximum current

Download from Www.Somanuals.com. All Manuals Search And Download.

Features and specifications

Main battery

Removable, rechargeable lithium ion (Li-Ion) high-

capacity battery (8,400 mAh, 10.8V x 12 cell)

Battery life is up to 3.0 hours*

Battery recharge time is several hours*

*Battery life may vary depending on product model,

configuration, applications, power management settings

and features utilized. Recharge time varies depending on

usage. Battery may not charge while computer is

consuming full power. After a period of time, the battery

will lose its ability to perform at maximum capacity and

will need to be replaced. This is normal for all batteries.

To purchase a new battery pack, see the accessories

information that shipped with your computer or visit the

Toshiba Web site at www.accessories.toshiba.com.

These models achieved the battery life times shown using

Ziff Davis Media Inc.’s Business Winstone^®2002

BatteryMark^TMVersion 1.0. These tests were performed

without independent verification by the VeriTest testing

division of Lionbridge Technologies, Inc. (“VeriTest”).

Neither Ziff Davis Media Inc. nor VeriTest makes any

representations or warranties as to the results of the tests.

Winstone^®is a registered trademark and BatteryMark^TMis

a trademark of Ziff Davis Publishing Holdings Inc. in the

environment under which the tests were performed is

available at www.ts.toshiba.com by selecting your particular

product, family and model number, clicking GO, and then

clicking on the “Detailed Specs” link from the menu on

the left.

RTC battery

Li-Ion battery provides power for the internal real-time

clock and calendar

TECHNICAL NOTE: The RTC battery does not charge while the computer is turned

off even when AC power is attached.

Intelligent power

supply

Detects low battery charge and displays the battery charge

remaining or time remaining

Storage capacity

Hard disk

2.5-inch drive and controller provide non-volatile storage

for 30, 40, 60 or 80 GB (GB means 1 billion bytes)

Download from Www.Somanuals.com. All Manuals Search And Download.

Features and specifications

Ports

S-video port

Lets you connect the computer to an external NTSC/PAL

video device such as a standard television

Line-in jack

DC-IN

Allows you to connect your computer to an external audio

source to play or record sounds

Lets you connect the computer to AC power, using the AC

adapter and power cable

Headphone jack

Use the 3.5 mm headphone jack to connect stereo

headphones or other audio output devices. Connecting

headphones or other devices to this jack automatically

disables the internal speakers

Microphone in jack

RGB (monitor) port

Modem port

3.5 mm jack lets you connect an external monaural

microphone

15-pin, analog VGA port lets you connect an external

SVGA monitor (color or monochrome)

The modem port lets you connect the internal modem

directly to a telephone line via an RJ11 connection

USB 2.0 ports

LAN port

Support USB peripherals

The LAN port lets you connect to a LAN via an RJ45

connection

Parallel port

The parallel port lets you connect a parallel printer

Standard hardware

Memory

The system may come with 256 MB up to a maximum of

1024 MB of RAM

Display options

15.0-inch XGA (measured diagonally) active matrix Thin

Film Transistor (TFT) color LCD displays up to 16 million

colors at 640 x 480 expansion image, 800 x 600 expansion

image; 1024 x 768; 1280 x 1024 virtual display, 1600 x

1200 virtual display

15.0-inch SXGA+ (measured diagonally) active matrix

Thin Film Transistor (TFT) color LCD displays up to

16 million colors at 640 x 480 expansion image, 800 x 600

expansion image, 1024 x 768 expansion image,

1280 x 1024 expansion image; 1400 x 1050; 1600 x 1200

virtual display

Download from Www.Somanuals.com. All Manuals Search And Download.

Features and specifications

Communication

Integrated V.92 56K* modem

For more detailed information regarding your system’s

V.92 56K modem, visit the Toshiba Web site at

toshiba.com.

*Due to FCC limitations, speeds of 53 kbps are the maximum

permissible rates during downloads. Actual data transmission

speeds will vary depending on on-line conditions.

Networking

Keyboard

Integrated Intel 10/100 Base-TX Ethernet LAN adapter

with RJ45 port

Enhanced 85-key keyboard includes embedded numeric

and cursor control overlays, dedicated cursor control keys,

and Windows^®special keys

Pointing device

PC Card slot

TouchPad provides the function of a mouse or other

pointing device

One PC Card slot lets you install one Type II PC Card

Minimum slot thickness: 5 mm

SD card slot

The SD card slot holds an SD card

Sound controller

Software Sound, 16-bit stereo; built-in stereo speakers; full

duplex sound, DirectSound^®, Direct3D^®Sound,

DirectMusic^®

Optional accessories and devices

This section lists factory-installed options that are only available at the time

of order.

Wireless

communication

The computer may come with an optional integrated Wi-Fi

(802.11b or 802.11a/b) wireless LAN mini PCI

communication module providing wireless LAN

functions.

To install the Wi-Fi option at a later time, contact your Toshiba Authorized

Service Provider.

3.5-inch diskette drive External USB drive accommodates 1.44 MB, high-density

module

(2HDD) diskettes

Additional

batteries

Use as spare or replacement packs to extend the time you

can operate the computer away from a live electrical outlet

Cable

PORT-Noteworthy^®Computer Lock cable to deter

computer theft

Download from Www.Somanuals.com. All Manuals Search And Download.

Features and specifications

DVD-ROM drive

24x CD-ROM, 8x DVD-ROM

Compatibility: CD-ROM, CD-R (read only), CD-RW

(read only), DVD-ROM, DVD-R (read only)

DVD-ROM/

CD-RW drive

24x CD-ROM, 24x CD-R, 10x CD-RW, 8x DVD-ROM

Compatibility: CD-ROM, CD-R (read/write), CD-RW

(read/rewrite), DVD-ROM, DVD-R (read only), DVD-RW

(read only), DVD-RAM (read only)

DVD-R/RW drive

16x CD-R, 10x CD-RW, 1x DVD-R, 1x DVD-RW

Compatibility: CD-R (read/write), CD-RW (read/rewrite),

CD-ROM, DVD-ROM, DVD-R (read/write), DVD-RW

(read/write), DVD-RAM (read only)

DVD Multi drive

(when available)

16x CD-R, 10x CD-RW, 2x DVD-R, 2x DVD-RAM,

1x DVD-RW

Compatibility: CD-R (read/write), CD-RW (read/rewrite),

CD-ROM, DVD-ROM, DVD-R (read/write), DVD-RW

(read/write), DVD-RAM (read only)

Hard disk drive

2.5-inch drive provides non-volatile storage for

30 GB, 40 GB, 60 GB or 80 GB (GB means 1 billion

bytes)

Physical dimensions

This section lists the computer’s specifications

Weight

Size

7.9 pounds

width x depth x height

13.4 inches x 11.6 inches x 1.9 inches

Environmental conditions

Operating

Non-operating

Temperature

5° to 35° C (41° to 95° F)

-20° to 65° C (-4° to 149° F)

Relative humidity

20% to 80% non-condensing 10% to 95% non-condensing

Altitude

(relative to sea level)

-60 to 3,000 m

(-197 ft. to 9,842 ft.)

10G

-60 to 10,000 m

(-197 ft. to 32,808 ft.)

Shock

60G

Vibration

0.50G

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Model: Satellite ^®A20/A25 Series

ReWritable CD/DVD Drives

The computer system you purchased may include a ReWritable CD and/or

DVD drive(s), among the most advanced data storage technologies

available. As with any new technology, you must read and follow all set-up

and usage instructions in the applicable user guides and/or manuals

enclosed. If you fail to do so, this product may not function properly and

you may lose data or suffer other damage. TOSHIBA AMERICA

INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND

SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE

PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU

AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS

SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS

OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR

REMOVABLE STORAGE MEDIA ARISING OUT OF OR

RESULTING FROM THE USE OF THE PRODUCT, EVEN IF

ADVISED OF THE POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the

data stored on the hard disk or other storage devices as a precaution against

possible failures, alteration, or loss of the data. IF YOUR DATA IS

ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR

MALFUNCTION OF THE HARD DISK DRIVE OR OTHER

STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED,

TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS

OF DATA, OR ANY OTHER DAMAGE RESULTING

THEREFROM. WHEN COPYING OR TRANSFERRING YOUR

DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA

HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.

TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO

COPY OR TRANSFER THE DATA CORRECTLY.

Critical Applications

The computer you have purchased is not designed for any “critical

applications.” “Critical applications” means life support systems, medical

applications, connections to implanted medical devices, commercial

transportation, nuclear facilities or systems or any other applications where

product failure could lead to injury to persons or loss of life or catastrophic

property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES

AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY

ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN

ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT

TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, it may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

❖

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

❖

Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC Class B limits may be attached to

this equipment. Operation with noncompliant peripherals or peripherals not

recommended by Toshiba is likely to result in interference to radio and TV

reception. Shielded cables must be used between the external devices and

the computer's or expansion unit’s serial port, parallel port, monitor port,

USB port, PS/2^®port, i.LINK^®port and microphone jack. Changes or

modifications made to this equipment not expressly approved by Toshiba or

parties authorized by Toshiba could void the user’s authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

❖

This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.

Contact:

Toshiba America Information Systems, Inc.

9740 Irvine Blvd.

Irvine, CA 92618-1697

(949) 583-3000

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003

du Canada.

FCC Requirements

The following information is pursuant to FCC CFR 47, Part 68 and refers

to internal modems.

Installation

When you are ready to install or use the modem, call your local telephone

company and give them the following information:

❖

The telephone number of the line to which you will connect the

modem.

❖

The FCC registration number of the modem.

The ringer equivalence number (REN) of the modem, which is 0.6B.

The modem connects to the telephone line by means of a standard jack

called the USOC RJ11C.

Type of Service

Your modem is designed to be used on standard-device telephone lines.

Connection to telephone company-provided coin service (central office

implemented systems) is prohibited. Connection to party lines service is

subject to State tariffs. If you have any questions about your telephone line,

such as how many pieces of equipment you can connect to it, the telephone

company will provide this information upon request.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it

can. In order to do this, it may occasionally be necessary for them to make

changes in their equipment, operations or procedures. If these changes

might affect your service or the operation of your equipment, the telephone

company will give you notice, in writing, to allow you to make any changes

necessary to maintain uninterrupted service.

If Problems Arise

If any of your telephone equipment is not operating properly, you should

immediately remove it from your telephone line, as it may cause harm to

the telephone network. If the telephone company notes a problem, they

may temporarily discontinue service. When practical, they will notify you

in advance of this disconnection. If advance notice is not feasible, you will

be notified as soon as possible. When you are notified, you will be given

the opportunity to correct the problem and informed of your right to file a

complaint with the FCC. In the event repairs are ever needed on your

modem, they should be performed by Toshiba Corporation, Toshiba

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

America Information Systems, Inc. or an authorized representative of

Toshiba.

Disconnection

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this

change.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful to use

a computer or other electronic device to send any message via a telephone

fax machine unless such message clearly contains in a margin at the top or

bottom of each transmitted page or on the first page of the transmission, the

date and time it is sent and an identification of the business, other entity or

individual sending the message and the telephone number of the sending

machine or such business, other entity or individual.

In order to program this information into your fax modem, you should

complete the setup for your fax software before sending a message.

Instructions for IC CS-03 certified equipment

NOTICE: The Industry Canada label identifies certified equipment.

This certification means that the equipment meets certain

telecommunications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local

telecommunications company. The equipment must also be installed

using an acceptable method of connection. The customer should be

aware that compliance with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be coordinated by a

representative designated by the supplier. Any repairs or alterations

made by the user to this equipment, or equipment malfunctions, may

give the telecommunications company cause to request the user to

disconnect the equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

Caution: Users should not attempt to make such connections

themselves, but should contact the appropriate electric inspection

authority, or electrician, as appropriate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar

to the following:

The Ringer Equivalence Number (REN) of this device can be found

on the label affixed to your computer.

NOTICE: The Ringer Equivalence Number (REN) assigned to each

terminal device provides an indication of the maximum number of

terminals allowed to be connected to a telephone interface. The

termination on an interface may consist of any combination of devices

subject only to the requirement that the sum of the Ringer Equivalence

Numbers of all the devices does not exceed 5.

The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be

interoperable with any wireless LAN product that is based on Direct

Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:

❖

The IEEE 802.11 Standard on Wireless LANs (Revision A/B), as

defined and approved by the Institute of Electrical and Electronics

Engineers.

❖

The Wireless Fidelity (WiFi) certification as defined by the WECA

Wireless Ethernet Compatibility Alliance.

Caution

Bluetooth™ and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use

Bluetooth™ and Wireless LAN devices simultaneously, you may

occasionally experience a less than optimal network performance or even

lose your network connection.

If you should experience any such problem, immediately turn off either one

of your Bluetooth™ or Wireless LAN.

Please contact Toshiba PC product support on web site http://www.toshiba-

europe.com/computers/tnt/bluetooth.htm in Europe or

http://www.pcsupport.global.toshiba.com in the United States for more

information.

Caution

This device is restricted to indoor use due to its operation in the 5.15 to

5.85 GHz frequency range.

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency

electromagnetic energy. The level of energy emitted by Wireless LAN

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

devices however is far much less than the electromagnetic energy emitted

by wireless devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in

radio frequency safety standards and recommendations, TOSHIBA

believes Wireless LAN is safe for use by consumers. These standards and

recommendations reflect the consensus of the scientific community and

result from deliberations of panels and committees of scientists who

continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be

restricted by the proprietor of the building or responsible representatives of

the organization. These situations may for example include:

❖

Using the Wireless LAN equipment on board of airplanes, or

In any other environment where the risk of interference to other

devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices

in a specific organization or environment (e.g. airports), you are

encouraged to ask for authorization to use the Wireless LAN device prior to

turning on the equipment.

Regulatory Information

The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in

strict accordance with the manufacturer’s instructions as described in the

user documentation that comes with the product. This device complies with

the following radio frequency and safety standards.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located

or pointed such that it does not emit RF field in excess of Health Canada

limits for the general population; consult Safety Code 6, obtainable from

Health Canada’s website www.hc-sc.gc.ca/rpb. The RF device shall not be

co-located with any other transmitter that has not been tested with this

device.

Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of this device.

L ‘utilisation de ce dispositif est autorisée seulement aux conditions

suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du

dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,

même si ce brouillage est susceptible de compromettre le fonctionnement

du dispositif.

The term “IC” before the equipment certification number only signifies that

the Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended

to be operated indoors and away from windows to provide maximum

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

shielding. Equipment (or its transmit antenna) that is installed outdoors is

subject to licensing.

Pour empecher que cet appareil cause du brouillage au service faisant

l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin

des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel

(ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet

d'une licence.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE

Directive 1999/5/EC with essential test suites as per standards:

❖

EN 60950 Safety of Information Technology equipment

ETS 300 328 Technical requirements for radio equipment

ETS 300 826 General EMC requirements for radio equipment.

België/

Belgique:

For outdoor usage only channel 10 (2457 MHz) and 11 (2462

MHz) is allowed.

For private usage outside buildings across public grounds over

less than 300m no special registration with IBPT/BIPT is

required. Registration to IBPT/BIPT is required for private usage

outside buildings across public grounds over more than 300m. An

IBPT/BIPT license is required for public usage outside building.

For registration and license please contact IBPT/BIPT.

Gebruik buiten gebouw alleen op kanalen 10 (2457 MHz) en 11

(2462 MHz). Voor privé-gebruik buiten gebouw over publieke

groud over afstand kleiner dan 300m geen registratie bij BIPT/

IBPT nodig; voor gebruik over afstand groter dan 300m is wel

registratie bij BIPT/IBPT nodig. Voor publiek gebruik buiten

gebouwen is licentie van BIPT/IBPT verplicht. Voor registratie of

licentie kunt u contact opnemen met BIPT.

L’utilisation en extérieur est autorisé sur le canal 10 (2457 MHz)

et 11 (2462 MHz). Dans le cas d’une utilisation privée, a

l’extérieur d’un bâtiment, audessus d’un espace public, aucun

enregistrement n’est nécessaire pour une distance de moins de

300m. Pour une distance supérieure à 300m un enregistrement

auprés de I’IBPT est requise. Pour une utilisation publique à

I’extérieur de bâtiments, une licence de I’IBPT est requise. Pour

les enregistrements et licences, veuillez contacter I’IBPT.

Deutschland: License required for outdoor installations. Check with reseller for

procedure to follow.

Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigung-

spflichtig. Bitte mit Händler die Vorgehensweise abstimmen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

France:

Restricted frequency band: only channels 10 and 11 (2457 MHz

and 2462 MHz respectively) may be used in France. License

required for every installation, indoor and outdoor installations.

Please contact ART for procedure to follow.

Bande de fréquence restreinte : seuls les canaux 10 à 11 (2457 et

2462 MHz respectivement) doivent être utilisés en France. Toute

utilisation, qu’elle soit intérieure ou extérieure, est soumise à

autorisation. Vous pouvez contacter I’Autorité de Régulation des

Télécommuniations (http://www.art-telecom.fr) pour la procédure

à suivre.

Italia:

License required for indoor use. Use with outdoor installations

not allowed.

E’necessaria la concessione ministeriale anche per l’uso interno.

Verificare con i rivenditori la procedura da seguire. L’uso per

installazione in esterni non e’ permessa.

Nederland:

License required for outdoor installations. Check with reseller for pro-

cedure to follow.

Licentie verplicht voor gebruik met buitenantennes. Neem contact

op met verkoper voor juiste procedure.

USA-Federal Communications Commission (FCC)

This device complies with Part 15 of FCC Rules. Operation of the devices

in a Wireless LAN System is subject to the following two conditions:

❖

This device may not cause harmful interference.

This device must accept any interference that may cause undesired

operation.

TOSHIBA is not responsible for any radio or television interference caused

by unauthorized modification of the devices included with this TOSHIBA

Wireless LAN Mini PCI Card, or the substitution or attachment of

connecting cables and equipment other than specified by TOSHIBA.

The correction of interference caused by such unauthorized modification,

substitution or attachment will be the responsibility of the user.

Caution: Exposure to Radio Frequency Radiation

The Toshiba Wireless LAN Mini PCI Card will be installed with one of two

types of antennas. The both of antenna types, when installed are located at

the upper edge of the LCD screen.

For both antennas, the radiated output power of the TOSHIBA Wireless

LAN Mini PCI Card is far below the FCC radio frequency exposure limits.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in

such a manner that the potential for human contact during normal operation

is minimized. In normal operating configuration, the LCD in the upright

position, the distance between the antenna and the user should not be less

than 20cm. The antenna(s) used for this transmitter must not be co-located

or operating in conjunction with any other antenna or transmitter.

Antenna(s) used in 5.15-5.25GHz frequency band must be integral antenna

which provide no access to the end user.

Refer to the Regulatory Statements as identified in the documentation that

comes with those products for additional information.

Caution: Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 to

5.25 GHz frequency range. FCC requires this product to be used indoors

for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar stations can cause interference

with and/or damage this device.

Taiwan

Article 14

Article 17

Unless approved, for any model accredited low power radio

frequency electric machinery, any company, trader or user shall

not change the frequency, increase the power or change the

features and functions of the original design.

Any use of low power radio frequency electric machinery shall

not affect the aviation safety and interfere with legal

communications. In event that any interference is found, the use

of such electric machinery shall be stopped immediately, and

reusing of such products can be resumed until no interference

occurs after improvement.

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and

regulations.

Low power radio frequency electric machinery shall resist against

interference from legal communications or from industrial, scientific and

medical radio emission electric machinery.

Using this equipment in Japan

In Japan, the frequency bandwidth of 2,400-2,483.5 MHz for second

generation low-power data communication systems such as this equipment

overlaps that of mobile object identification systems (premises radio station

and specified low-power radio station).

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication

The indication shown below appears on this equipment.

2.4 this equipment uses a frequency of 2.4 GHz.

DS. This equipment uses DS-SS modulation.

The interference range of this equipment is less than 40m.

This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz.

It is possible to avoid the band of mobile object identification systems.

3. TOSHIBA Direct PC

Monday – Friday:

Toll Free Tel:

Direct Dial:

Fax:

10:00 – 17:00

0120-13-1100

03-3457-5916

03-5444-9450

Device Authorization

This device obtains the Technical Regulation Conformity Certification and

the Technical Conditions Compliance Approval, and it belongs to the

device class of radio equipment of low-power data communication system

radio station stipulated in the Radio Law and the Telecommunications

Business Law of Japan.

The Name of the radio equipment: MPC13A-20/R

JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS

EQUIPMENT

Approval Number: D01-1128JP

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018,

03GZDA0017

The following restrictions apply:

❖

Do not disassemble or modify the device.

Do not install the embedded wireless module into other device.

Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy. If not installed and used in accordance with the

instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try and correct the interference by one or more of

the following measures:

❖

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

❖

Consult the dealer or an experienced radio/TV technician for help.

Toshiba is not responsible for any radio or television interference caused by

unauthorized modification of the devices included with this Toshiba

Wireless LAN Mini PCI Card, or the substitution or attachment of

connecting cables and equipment other than specified by Toshiba.

The correction of interference caused by such unauthorized modification,

substitution or attachment will be the responsibility of the user.

The following information is dependent on what type of wireless device is in your

computer.

Approved Countries/Regions for use for the Atheros AR5001X Mini PCI

Wireless network adapter

This equipment is approved to the radio standard by the countries/regions

in the following table.

Do not use this equipment except in the countries/regions in the following table.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

802.11b (2.4GHz)

Australia

Canada

Austria

Denmark

Germany

Italy

Belgium

Finland

France

Greece

Ireland

Liechtenstein

New Zealand

Sweden

Luxembourg

Norway

Netherlands

Portugal

Switzerland

USA

802.11a (5GHz)

Australia

Canada

Austria

Denmark

Germany

Italy

Belgium

Finland

France

Greece

Ireland

Liechtenstein

New Zealand

Sweden

Luxembourg

Norway

Netherlands

Portugal

Switzerland

USA

Turbo Mode (5GHz)

Canada

USA

Approved Countries/Regions for use for the Intel^®PRO/Wireless LAN 2100

3B Mini PCI Adapter

This equipment is approved to the radio standard by the countries/regions

in the following table.

Do not use this equipment except in the countries/regions in the following table.

Argentina

Belgium

Chile

Australia

Brazil

Austria

Canada

Finland

Greece

Denmark

Germany

France

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Iceland

Ireland

Italy

Japan

Liechtenstein

Netherlands

Peru

Luxembourg

New Zealand

Portugal

Mexico

Norway

Singapore

Switzerland

USA

Spain

Sweden

Uruguay

Venezuela

Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN

Card

This equipment is approved to the radio standard by the countries/regions

in the following table.

Do not use this equipment except in the countries/regions in the following table.

Australia

Canada

Austria

Belgium

Finland

Denmark

Germany

Iceland

France

Greece

Hong Kong

Italy

Ireland

Japan

Liechtenstein

Netherlands

Philippines

Spain

Luxembourg

New Zealand

Portugal

Sweden

Malaysia

Norway

Singapore

Switzerland

USA

Thailand

Bluetooth wireless technology Interoperability

Bluetooth™ Cards from TOSHIBA are designed to be interoperable with

any product with Bluetooth wireless technology that is based on Frequency

Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

❖

Bluetooth Specification Ver.1.1, as defined and approved by The

Bluetooth Special Interest Group.

❖

Logo certification with Bluetooth wireless technology as defined by

The Bluetooth Special interest Group.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not

confirmed compatibility of its Bluetooth™products with all PCs and/or equipment

using Bluetooth wireless technology other than TOSHIBA portable computers.

Always use Bluetooth™cards from TOSHIBA in order to enable wireless

networks over two or more (up to a total of seven) TOSHIBA portable

computers using these cards. Please contact TOSHIBA PC product support

on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in

Europe or http://www.pcsupport.global.toshiba.com in the United States for

more information.

When you use Bluetooth™cards from TOSHIBA close to 2.4 GHz Wireless

LAN devices, Bluetooth transmissions might slow down or cause errors. If

you detect certain interference while you use Bluetooth™cards from

TOSHIBA, always change the frequency, move your PC to the area outside of

the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74

yards or more) or stop transmitting from your PC. Please contact TOSHIBA

PC product support on Web site http://www.toshiba-europe.com/computers/

tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in

the United States for more information.

Bluetooth™and Wireless LAN devices operate within the same radio frequency range and may

interfere with one another. If you use Bluetooth™and Wireless LAN devices simultaneously,

you may occasionally experience a less than optimal network performance or even lose your

network connection. If you should experience any such problem, immediately turn off either

one of your Bluetooth™or Wireless LAN. Please contact Toshiba PC product support on web

site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://

www.pcsupport.global.toshiba.com in the United States for more information.

Bluetooth wireless technology and your Health

The products with Bluetooth wireless technology, like other radio devices,

emit radio frequency electromagnetic energy. The level of energy emitted

by devices with Bluetooth wireless technology however is far much less

than the electromagnetic energy emitted by wireless devices like for

example mobile phones.

Because products with Bluetooth wireless technology operate within the

guidelines found in radio frequency safety standards and recommendations,

TOSHIBA believes Bluetooth wireless technology is safe for use by

consumers. These standards and recommendations reflect the consensus of

the scientific community and result from deliberations of panels and

committees of scientists who continually review and interpret the extensive

research literature.

In some situations or environments, the use of Bluetooth wireless

technology may be restricted by the proprietor of the building or

responsible representatives of the organization. These situations may for

example include:

❖

Using the equipment with Bluetooth wireless technology on board of

airplanes, or

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

❖

In any other environment where the risk of interference to other

devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices

in a specific organization or environment (e.g. airports), you are

encouraged to ask for authorization to use the device with Bluetooth

wireless technology prior to turning on the equipment.

Regulatory statements

This product complies with any mandatory product specification in any

country/ region where the product is sold. In addition, the product complies

with the following:

Canada-Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of this device.”

L ‘ utilisation de ce dispositif est autorisée seulement aux conditions

suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du

dispositif doit étre prét à accepter tout brouillage radioélectrique reçu,

même si ce brouillage est susceptible de compromettre le fonctionnement

du dispositif.

The term "IC" before the equipment certification number only signifies that

the Industry Canada technical specifications were met.

Caution: FCC Interference Statement

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions:

❖

This device may not cause harmful interference, and

This device must accept any interference received, including

interference that may cause undesired operation.

Note that any changes or modifications to this equipment not expressly

approved by the manufacturer may void the authorization to operate this

equipment.

Caution: Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth™ Card from TOSHIBA is far

below the FCC radio frequency exposure limits. Nevertheless, the

Bluetooth™ Card from TOSHIBA shall be used in such a manner that the

potential for human contact during normal operation is minimized.

In order to comply with FCC radio-frequency radiation exposure

guidelines for an uncontrolled environment, the Bluetooth™ Card from

TOSHIBA has to be operated while maintaining a minimum body to

antenna which are located on top of LCD distance of 20 cm.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Refer to the Regulatory Statements as identified in the documentation that

comes with those products for additional information.

The Bluetooth™ Card from TOSHIBA is far below the FCC radio

frequency exposure limits.

Nevertheless, it is advised to use the Bluetooth™ Card from TOSHIBA in

such a manner that human contact during normal operation is minimized.

Changes or modifications made to this equipment not expressly approved by

TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate

the equipment.

Taiwan

Article 14

Unless approved, for any model accredited low power radio

frequency electric machinery, any company, trader or user shall

not change the frequency, increase the power or change the

features and functions of the original design.

Article 17

Any use of low power radio frequency electric machinery shall

not affect the aviation safety and interfere with legal

communications. In event that any interference is found, the use

of such electric machinery shall be stopped immediately, and

reusing of such products can be resumed until no interference

occurs after improvement.

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and

regulations.

Low power radio frequency electric machinery shall resist against

interference from legal communications or from industrial, scientific and

medical radio emission electric machinery.

Using this equipment in Japan

In Japan, the frequency bandwidth of 2,400-2,483.5 MHz for second

generation low-power data communication systems such as this equipment

overlaps that of mobile object identification systems (premises radio station

and specified low-power radio station).

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication

The indication shown below appears on this equipment.

2 . 4 FH1

2.4: this equipment uses a frequency of 2.4 GHz.

FH: This equipment uses FH-SS modulation.

The interference range of this equipment is less than 10m.

This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz. It is impossible to avoid the band of mobile object

identification systems.

3. TOSHIBA Direct PC

Monday – Friday:

Toll Free Tel:

Direct Dial:

10:00 – 17:00

0120-13-1100

03-3457-5916

03-5444-9450

Fax:

Device Authorization

This device obtains the Technical Regulation Conformity Certification, and

it belongs to the device class of radio equipment of low-power data

communication system radio station stipulated in the Radio Law of Japan.

The Name of the radio equipment: EYXF2CS

TELECOM ENGINEERING CENTER

Approval Number: 01NYDA1305

The following restrictions apply:

❖

Do not disassemble or modify the device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

❖

Do not install the embedded wireless module into other device.

CD-ROM, DVD-ROM, Multi-function Drive Safety Instructions

CD-ROM, DVD-ROM and multi-function drives employ a laser system. To

ensure proper use of this product, please read this instruction manual

carefully and retain for future reference. Should the unit ever require

maintenance, contact an authorized service location.

Use of controls, adjustments or the performance of procedures other than

those specified may result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

(Sample shown below. (Location of the label and manufacturing

information may vary.)

This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To

use this model properly, read the instruction manual carefully and keep it for your future

reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED

service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.

Use of controls or adjustments or performance of procedures other than those specified in the

owner’s manual may result in hazardous radiation exposure.

This guide is copyrighted by Toshiba America Information Systems, Inc.

reproduced in any form without the prior written permission of Toshiba. No

patent liability is assumed, however, with respect to the use of the

information contained herein.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Export Administration Regulation

This document contains technical data that may be controlled under the

U.S. Export Administration Regulations, and may be subject to the

approval of the U.S. Department of Commerce prior to export. Any export,

directly or indirectly, in contravention of the U.S. Export Administration

Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any

product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA

INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO

WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER

INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY

DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO

ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY

FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY

FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR

OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES

BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT

SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,

WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,

ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR

ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE

THEREOF.

Trademarks

Satellite, Noteworthy and InTouch are registered trademarks of Toshiba

America Information Systems, Inc. and/or Toshiba Corporation.

Microsoft, Direct3D, DirectSound, DirectMusic and Windows are

registered trademarks of Microsoft Corporation.

Wi-Fi is a trademark of the Wireless Capability Ethernet Alliance.

Bluetooth is a trademark owned by its proprietor and used by Toshiba

under license. TouchPad is a trademark of Synaptics, Inc. Intel and Pentium

are registered trademarks of the Intel Corporation. PS/2 is a registered

trademark of IBM, Inc. i.LINK is a registered trademark of Sony

Corporation. OpenGL is a registered trademark of Silicon Graphics, Inc.

BatteryMark is a trademark of Ziff Davis Publishing Holdings Inc.

All other brand and product names are trademarks or registered trademarks

of their respective companies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory information

Computer Disposal Information

This product contains mercury. Disposal of this material may be regulated

due to environmental considerations. For disposal, reuse or recycling

information, please contact your local government or the Electronic

Industries Alliance at www.eiae.org.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

AC power light 5

adding memory 7

alarms low battery 20

avoiding injury 4

DC-IN 6

Digital V e rsatile Discs (DVDs) 16

display

screen is blank 25

DVD-ROM drive

eject button 17

inserting a disc 17

removing a disc 18

battery

alarms 20

changing 20

installing 20

light 20

monitoring power 20

removing 20

built-in features 28

buttons

environmental considerations 4

ergonomics

seating guidelines 5

error messages

CD/DVD controls 17

control 16

DVD-ROM drive

eject 17

multi-function drive

program has performed an illegal

operation 25

eject 17

card

files

SD 14

backing up 15

saving 15

CD/DVD control buttons 17

CD/DVDs

inserting 17, 18

removing 18

CDs

inserting 18

changing

help

Toshiba Web sites 27

hot swapping

precautions 14

main battery 20

comfort

icons

chair 5

safety 3

inserting

CDs and DVDs 18

PC Card 13

SD card 15

installing

compact discs

inserting 18

computer

moving 19

placement 4

setting up 7

computing tips 15

main battery 20

memory module 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

interference statement 44

internal drives 32

primary control button 16

printer

connecting 6

problem solving

keyboard

computer hangs when PC Card inserted 26

computer will not power up 25

contacting Toshiba 27

display is blank 25

illegal operation 25

unexpected characters 25

lights

AC power 5

battery 20

keyboard produces unexpected c haracters

PC Card checklist 26

PC Card slot appears dead 26

program not responding 24

processor, specifications 28

main battery

changing 20

removing 20

memory

accessing slots 8

adding 7

removing

disc with computer off 19

disc with computer on 18

main battery 20

PC Card 14

removing 11

memory module

removing 12

Microsoft Windows XP 3

moving the computer 19

multi-function drive

eject button 17

inserting a disc 17

removing a disc 18

safety

SCSI (Small Computer Systems Interface) 14

SD card

operating system 3

optional devices 32

inserting 15

removing 15

using 14

secondary control button 16

environmental 33

physical dimensions 32, 33

ports 31

power 29

processor 28

standard hardware 31

storage capacity 30

standard hardware, specifications 31

storage capacity, specifications 30

PC Card

checklist 26

computer stops working 26

inserting 13

problem solving 26

removing 14

replacing 14

port

specifications 31

power

cable 6

cable connectors 28

computer will not start 25

monitoring 20

specifications 29

power devices 32

precautions 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

tips on computing 15

Toshiba Accessories Information 4

Toshiba Web sites 27

TouchPad

using 16

TOSHIBA

C1819-3

Download from Www.Somanuals.com. All Manuals Search And Download.

Tektronix Welding System 071 0590 00 User Manual
Thermador Ventilation Hood PH30HS User Manual
Toshiba CRT Television 36HF13 User Manual
Tripp Lite Computer Accessories NB1001BK User Manual
Tripp Lite Network Cables P581 006 User Manual
Tripp Lite Power Supply 200510095 User Manual
Ultra Products Ventilation Hood ULT30240 User Manual
Velodyne Acoustics Speaker SMS 1 User Manual
Victor Technology Calculator 1228 2 Series User Manual
Weber Charcoal Grill 39950 User Manual