LCD Color Television
20HL85
J3U70221A(E)Cover
1
05/08/2005, 10:12 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Clean only with a dry cloth.
6. ATTACHMENTS
Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement,
or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by the
manufacturer.
PORTABLE CART WARNING
(symbol provided by RETAC)
DANGER:
RISK OF DEATH, SERIOUS
PERSONAL INJURY, OR
EQUIPMENT DAMAGE.
S3126A
8A. An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation, and to
ensure reliable operation of the unit, and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or
heat source. This unit should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the
type of power supply to your home, consult your appliance dealer or local power company.
Wide plug
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage
to the unit due to lightning and power line surges.
3
J3U70221A(E)P02-10
3
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts
that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to
provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical
Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA
GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND
CLAMP
NEC-NATIONAL ELECTRICAL CODE
S2898A
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250, PART H)
GROUND CLAMPS
18. SERVICING
Do not attempt to service this unit yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the unit to
its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
21. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
4
J3U70221A(E)P02-10
4
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
22. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall
outlet. Failure to do so may cause product damage. Read the owner's manual of the other equipment carefully and
follow the instructions when making any connections.
23. HEADPHONES
When you use headphones, keep the volume at a moderate level. Using headphones continuously at a high volume
may cause hearing damage.
24. LCD
Do not press on or allow anything to impact the surface of the viewing screen (LCD panel). The LCD panel inside the
TV is fragile and subject to damage. The LCD Panel contains glass and a toxic liquid. If the liquid comes in contact
with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult
your doctor.
• ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped.
ON DISPOSAL
This product contains mercury. Disposal of mercury may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local authorities or the
5
J3U70221A(E)P02-10
5
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes about your LCD TV
2) The LCD panel contained in this TV is manufactured using an
extremely high level of precision technology; however, there
may be an occasional pixel (dot of light) that does not operate
properly (does not light, remains constantly lit, etc.). This is a
structural property of LCD technology, is not a sign of
malfunction, and is not covered under your warranty. Such
pixels are not visible when the picture is viewed from a normal
viewing distance.
The following symptoms are technical limitations of
LCD Display technology and are not an indication of
malfunction; therefore, Toshiba is not responsible for
perceived defects resulting from these symptoms.
1) An afterimage (ghost) may appear on the screen if a fixed,
non-moving image is displayed for a long period of time. The
afterimage is not permanent and will disappear in a short
period of time.
Note: Interactive video games that involve shooting a “gun”
type of joystick at an on-screen target may not work with this
TV.
Precautions
Notes on cleaning
Notes on handling
Clean only with a soft, dry, lint-free cloth.
I Do not subject the LCD panel to physical shock, such as
dropping it. It may cause unit damage and malfunction.
I Retain the original shipping carton and packing
materials. For maximum protection when shipping,
repack the unit as it was originally packed at the factory.
I Do not use volatile liquids, such as insecticide, near the
unit. Do not leave rubber or plastic products in contact
with the unit for prolonged periods of time. Doing so will
leave marks on the finish.
I The top and rear panels of the unit may become warm
after a long period of use. This is not a malfunction.
I When the unit is not in use, turn off the power.
I If you do not use the unit for a long period, the unit may
not function properly in the future. Turn on and use the
unit occasionally.
Notes on LCD
I The fluorescent tube which illuminates the panel from
the inside will deteriorate with use. When the LCD
becomes dim, flickers, or does not illuminate, contact
your dealer for replacement.
I The brightness of the LCD monitor differs slightly
depending on the viewing angles. Adjust the angle to
obtain the best viewing. (The recommended angle is 90
degrees to the monitor.)
Notes on locating the unit
I When you place this unit near a TV, radio, or VCR, the
playback picture may become poor and the sound may
be distorted. In this case, place the unit away from the
TV, radio, or VCR.
I To avoid damage to this product, never place or store
the TV in direct sunlight; hot, humid areas; or areas
subject to excessive dust or vibration.
I Always place the TV on the floor or a sturdy, level stable
surface that can support the weight of the unit. Use a
sturdy tie between the TV's rear hooks and the rear wall,
pillar, etc., or screw the TV to the stand using the TV’s
rear screw hole or a safety band (see illustration).
Screw
Tie
Wall
Screw holes
Hooks
TV Stand
Screw
Safety Band
6
J3U70221A(E)P02-10
6
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction ........................................................... 2
Using the TV’s features ...................................... 24
IMPORTANT SAFEGUARDS ..................................... 3
Precautions ................................................................ 6
Exploring your new TV................................................ 8
Selecting a location for the TV.................................... 9
Adjusting the channel settings.................................. 24
Switching between two channels ............................. 24
Programming your favorite channels........................ 24
Using the LOCKS menu ........................................... 25
Selecting a password.......................................... 25
Locking channels ................................................ 26
Locking the video inputs ..................................... 26
Setting the GameTimerTM .................................... 27
Using the panel lock feature ............................... 27
Labeling channels .................................................... 28
Selecting the video input source .............................. 29
Labeling the video input sources .............................. 29
Setting the clock ....................................................... 29
Setting the ON timer ................................................. 30
Viewing the wide-screen picture formats (480i and
480p signals only) .................................................... 31
Selecting the cinema mode ...................................... 32
Using the ASPECT feature ....................................... 32
Setting the sleep timer.............................................. 33
Using the closed caption feature .............................. 33
Adjusting the picture ................................................. 34
Selecting the picture mode ................................. 34
Adjusting the picture quality ................................ 34
Using the CableClear® feature ............................ 35
Selecting the color temperature .......................... 35
Resetting your picture adjustments .................... 35
Adjusting the sound .................................................. 36
Muting the sound ................................................ 36
Selecting stereo/SAP broadcasts ....................... 36
Adjusting the sound quality ................................. 36
Resetting your audio adjustments ...................... 37
Using the StableSound® feature ......................... 37
Using the WOW™ surround sound feature ........ 37
Selecting the HDMI audio input source .............. 38
Adjusting the back lighting feature ........................... 38
Displaying on-screen information ............................. 38
Auto power off .......................................................... 38
Understanding the Power Return feature ................. 38
Picture/Audio adjustments in the PC mode .............. 39
Resetting your picture/audio adjustment
Connecting your TV .............................................. 9
Connecting a VCR...................................................... 9
Connecting a cable converter box or antenna .......... 10
Connecting a DVD player/satellite receiver and a
VCR .......................................................................... 11
Connecting a DVD player with ColorStream®
(component video) and a VCR ................................. 12
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR .......... 13
Connecting a camcorder .......................................... 14
Connecting an HDMI™ or a DVI device to the
HDMI input ............................................................... 15
Connecting a PC (Personal Computer) .................... 16
Power source....................................................... 16
Power connection ..................................................... 16
Setting up your TV .............................................. 17
Using the remote control .......................................... 17
Preparing the remote control for use .................. 17
Installing the remote control batteries ................. 17
Using the remote control to operate your other
devices................................................................ 17
Programming the remote control to operate your
other devices ...................................................... 18
Cable TV converter/satellite receiver, VCR and
DVD player code tables ...................................... 19
Learning about the remote control...................... 21
Starting setup ........................................................... 22
Changing the on-screen display language ......... 22
Adding channels to the TV’s memory ................. 23
Programming channels automatically ................. 23
Adding and erasing channels manually .............. 23
Changing channels ............................................. 23
in the PC mode......................................................... 39
Appendix .............................................................. 40
Troubleshooting ........................................................ 40
Specifications ........................................................... 41
Limited Canada Warranty ......................................... 42
7
J3U70221A(E)P02-10
7
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploring your new TV
You can operate your TV by using the buttons on the top panel or the remote control. The side and back panels provide the
inputs to connect other equipment to your TV.
The STARTING SETUP feature appears
the first time you turn on the TV. See page
22 for details.
Top panel
The volume and channel buttons on the top panel can
be used as
/
and
/
buttons while the TV menu is
displayed on screen.
Approx 5°
Approx 10°
Remote control
Top
INPUT DISPLAY
Right side
Front
You can adjust
the angle of the
TV screen 5°
forward or 10°
backward from
vertical. Hold the
base of the TV
while adjusting
the angle.
Power indicator
Remote sensor
Left side
Back
Side panel
HEADPHONE
VIDEO-2 IN
PC IN
CT-885
Back panel
DC IN RF IN VIDEO-1 IN ColorStream
HD IN
HDMI IN
8
J3U70221A(E)P02-10
8
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a location for the TV
• Place the TV on the floor or on a sturdy platform in a location where
light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventilation.
Inadequate ventilation may cause overheating, which may damage
the TV.
Connecting your TV
If you haven’t connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section. (Cables
are not supplied.)
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Standard A/V (audio/video) cables are usually color coded accord-
ing to use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo left (or mono) channel. If you look at the rear
panel of the TV, you will see that the terminals are color coded in
the same manner as the cables.
• S-video cables provide better picture performance than standard
video cables. S-video cables can only be used with S-video
compatible components.
• Component video cables provide better picture performance than
S-video cables. Component video cables can only be used with
component video compatible components.
• HDMI (High Definition Multimedia Interface) cable is for use with
video equipment that has HDMI output (see page 15).
Note:
To prevent equipment damage,
do not plug in any power cords
until you have finished
connecting all equipment.
ANTENNA
Coaxial Cable
S-Video
Cable
AUDIO
Cables
Component video
Cables
VIDEO
Cable
HDMI
Cable
Connecting a VCR
This connection allows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
TV back panel
Note:
If using a mono VCR, connect L/Mono to VCR
Audio OUT using only one audio cable. For
better picture quality, if your VCR has S-video,
you can use an S-video cable instead of the
standard video cable. Do not connect a
standard video cable and an S-video cable to
VIDEO-1 simultaneously.
VIDEO-1 IN
Cable Lead-in
from cable box
or antenna
Stereo VCR
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
IN
IN from ANT
OUT to TV
OUT
CH
CH
3
4
L
R
VIDEO
AUDIO
9
J3U70221A(E)P02-10
9
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a cable converter box or antenna
This television has an extended tuning range and can tune most cable
channels without using a cable company supplied converter box. Some
cable companies offer "premium pay channels" in which the signal is
scrambled. Descrambling these signals for normal viewing requires the
use of a descrambler device, which is generally provided by the cable
company.
Option 1: For Subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler box,
connect the incoming 75 ohm Coaxial Cable directly to the Antenna
Jack on the back of the television.
Option 2: For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service that requires the use of a Converter/
Descrambler box, connect the incoming cable to the Converter/
Descrambler box and connect the output of the box to the Antenna
Jack on the back of the television. Follow the connections shown below.
Set the television to the output of the Converter/Descrambler box
(usually channel 3 or 4) and use the Converter/Descrambler box to
select channels.
Option 3: For Subscribers to Unscrambled Basic Cable with
Scrambled Premium Channels
If you subscribe to a cable service in which basic cable channels are
unscrambled and premium channels require the use of a Converter/
Descrambler box, you may wish to use a two-set signal splitter (some-
times called a "two-set coupler") and an A/B Switch box from the cable
installer or an electronics supply store. Follow the connections shown
below. With the switch in the "B" position, you can directly tune any
nonscrambled channels on your TV. With the switch in the "A" position,
tune your TV to the output of the Converter/Descrambler box (usually
channel 3 or 4) and use the box to tune scrambled channels.
Note:
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.
From Cable
Option 1:
TV back panel
Option 2:
Cable Box
VIDEO-1 IN
Cable Box
Option 3:
A
Splitter
A/B Switch
B
10
J3U70221A(E)P02-10
10
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player/satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV pro-
grams. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one S-video cable
Note:
From satellite
You can use a standard video cable instead of
the S-video cable, but the picture quality will
decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections but
remove the standard video cable. Do not
connect both an S-video and a standard
video cable to VIDEO1 at the same time or
the picture performance will be unacceptable.
DVD player / Satellite Receiver
VIDEO
AUDIO
L
R
OUT
Satellite IN
S-VIDEO
OUT to TV
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
Stereo VCR
IN
IN from ANT
OUT to TV
OUT
CH
CH
3
4
VIO
AUDIO
TV back panel
VIDEO-1 IN
11
J3U70221A(E)P11-16
11
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player with ColorStream®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs. You can record from one source while watching a
program from another source. Your TV is capable of using ColorStream
(component video). Connecting your TV to a component video compat-
ible DVD player, such as a Toshiba DVD player with ColorStream®, can
greatly enhance picture quality and performance.
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
Note:
The ColorStream HD jacks can be used with
Progressive (480p, 720p) and Interlaced
(480i, 1080i) scan systems. A 1080i signal will
provide the best picture performance.
DVD player with Component video
OUT
L
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
COMPONENT VIDEO
Y
R
VIDEO
OUT
AUDIO
S-VIDEO
TV back panel
VIDEO-1 IN
From antenna
Stereo VCR
IN
IN from ANT
OUT to TV
OUT
CH
CH
3
4
L
R
VIDEO
AUDIO
12
J3U70221A(E)P11-16
12
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one set of standard audio cables
• one set of component video cables
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream® (component video) inputs. Connecting your
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
Note:
For HDMI connection, see page 15.
The ColorStream HD jacks and HDMI jacks
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable to
VIDEO1 at the same time or the picture
performance will be unacceptable.
From Antenna
Stereo VCR
IN
IN from ANT
OUT TV
OUT
CH
CH
3
4
VIO
AUDIO
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
TV back panel
VIDEO-1 IN
From DTV
Antenna
AUDIO
OUT
L
Y
S-VIDEO
COMPONENT VIDEO
VIO
OT
R
DTV Receiver
with Component video
13
J3U70221A(E)P11-16
13
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a camcorder
You will need:
This connection allows you to watch videos recorded on a camcorder.
• one set of standard AV cables
VHS Camcorder
AUDIO
L
S-VIDEO
VIDEO
R
OUT
TV side panel
S-VHS Camcorder
You will need:
• one S-video cable
AUDIO
L
S-VIDEO
VIDEO
• one pair of standard audio cables
R
OUT
Note:
Rear lower left of TV
For better picture quality, if your camcorder
has S-video, you can use an S-video cable
(plus the standard audio cables) instead of a
standard video cable.
VIDEO-1 IN
Do not connect both a standard video cable
and an S-video cable at the same time, or the
picture performance will be unacceptable.
14
J3U70221A(E)P11-16
14
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an HDMI™ or a DVI device to the HDMI input
The HDMI[1] input on your TV receives digital audio and
[1] HDMI = High-Definition Multimedia Interface.
[2] DVI = Digital Video Interface.
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI[2] device.
[3] HDCP = High-bandwidth Digital Content Protection.
[4] EIA/CEA-861/861B compliance covers the
transmission of uncompressed digital video with high-
bandwidth digital content protection, which is being
standardized for reception of high-definition video
signals.
This input is designed to accept HDCP[3] program material
in digital form from EIA/CEA-861/861B–compliant[4]
consumer electronic devices (such as a set-top box or
DVD player with HDMI or DVI output).
The HDMI input is designed for best performance with high
definition video signals. It will accept and display 480i,
480p, 720p and 1080i signals.
Because this is an evolving technology, it is possible
that some devices may not operate properly with the
TV.
Note: The HDMI jack is not intended for connection to
and should not be used with a personal
To ensure that the HDMI or DVI device is reset prop-
erly, it is recommended that you follow these proce-
dures:
computer. For PC connection, see page 16.
• When turning on your electronic components, turn on
the TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off
the HDMI or DVI device first, and then the TV.
To connect an HDMI device, you will need:
• one HDMI cable (type A connector)
For proper operation, it is recommended that you use
as short an HDMI cable as possible. You should not
encounter difficulty if you use an HDMI cable that is
shorter than 16.4 ft (5m).
To connect a DVI device, you will need:
• one HDMI–to–DVI adapter cable
(HDMI type A connector)
HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration
below).
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
You must set the HDMI audio input setting to
“HDMI” in the AUDIO menu (see page 38).
• one pair of standard analog audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required (see
illustration below).
Some CDVs (Video CDs) may not output digital audio
signals. In that case, you may hear sound by connecting
analog audio cables. If you do use analog audio cables for
this reason, you will need to set the HDMI audio input
setting to “DVI” to hear the analog audio (see page 38).
Note: If you connect an HDMI device and analog audio
cables and play media with digital audio output, to hear
digital audio you must set the HDMI audio input setting
to “HDMI” (page 38).
You must set the HDMI audio input setting to “DVI”
in the AUDIO menu (see page 38).
DVI device
DVI
OUT
VIDEO
AUDIO
R
L
IN
OUT
HDMI device
VIDEO
AUDIO
R
L
HDMI
OUT
IN
OUT
TV back panel
TV back panel
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
15
J3U70221A(E)P11-16
15
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC (Personal Computer)
Before you connect this TV to your PC, change the adjustment of your
PC’s Resolution and Refresh rate. See “Monitor Display modes” at
right.
You will need:
• one VGA cable
Connect one end of a (male to male) VGA cable to the video card of
the computer and the other end to the VGA connector PC at the side of
the TV. Fix the connectors firmly with the screws on the plug. In case of
a Multimedia computer, connect the audio cables to the audio outputs
of your Multimedia computer and to the AUDIO L and R connectors of
the PC IN jacks of the TV.
Set the video input source to PC mode (see “Selecting the video input
source” on page 29 and “Picture/Audio adjustments in the PC mode”
on page 39). The TV can be used as a computer monitor.
Monitor Display modes
MODE Resolution
Refresh rate
60Hz
56.3Hz
60.3Hz
60Hz
VGA
640x480
SVGA 800x600
SVGA 800x600
XGA
1024x768
WXGA 1280x720
WXGA 1280x768
60Hz
60Hz
TV side panel
Notes:
• The current signal source does not display
when you return to TV mode.
• The on-screen displays will have a different
appearance in PC mode than in TV mode.
• When you select WXGA mode, set the
WXGA INPUT to ON in the PC PICTURE
menu (see page 39.)
To PC
Power source
Power connection
To use AC power
1.Connect the AC cord to the AC adapter.
2.Connect the AC adapter plug into the TV’s DC input jack.
3.Connect the AC cord into a wall outlet.
Notes:
Make sure to insert the plug of each cord securely.
During use the AC adapter becomes warm. This is not a
malfunction.
•
•
WARNING:
Do not connect this unit to the power source using any
device other than the supplied AC adapter or power
cord. This could cause fire, electric shock, or damage.
•
• Do not use with a voltage other than the power voltage
displayed. This could cause fire, electric shock, or
damage.
• Never lift the AC adapter by holding the AC cord. The AC
adapter may fall, causing personal injury or equipment
damage.
CAUTION:
Do not use the AC adapter if it is covered by a cloth etc.,
or pressed into a narrow area. This results in poor
dissipation of heat and may cause fire, electric shock, or
damage.
• When this unit is not used for a long time, (e.g., away on
a trip) in the interest of safety, be sure to unplug it from
the wall outlet.
•
AC 120V,
60Hz
To DC
input jack
2
3
• Do not plug/unplug the plug when your hands are wet.
This may cause electric shock.
AC
AC
AC
• If you need to replace the supplied
adapter or
cord must be
1
AC
cord, the specified
adapter and
AC adapter AC cord
(supplied)
used. Contact the dealer that you purchased the unit
from.
(supplied)
16
J3U70221A(E)P11-16
16
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most cable TV
converters/satellite receivers, VCRs, and DVD players together, even if
they are different brands. If you will be using your TV with a Toshiba
satellite receiver, VCR, or DVD player, your remote control is already
programmed and ready to use. If you own different brands of cable TV
converters/satellite receivers, VCRs, and/or DVD players, you must
first program your remote control. (See “Programming the
Note:
The TV remote control may not operate your
VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with
your other devices to see which features may
be available. Additionally, the remote control
for this TV may not support certain features
available on the original remote controls for
your other devices, in which case it is
suggested that you use the original remote
control for the applicable device.
remote control to operate your other devices," on page 18.)
Installing the remote control batteries
Caution:
To install the batteries:
• Never throw batteries into a fire.
1. Open the battery cover on the back of the remote control.
Notes:
•
•
•
Be sure to use AAA size batteries.
Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
If the remote control does not operate correctly,
or if the operating range becomes reduced,
replace batteries with new ones.
When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
•
•
2. Install two “AAA” size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
•
Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Using the remote control to operate your other devices
To control a cable TV
converter/satellite
receiver:
To control a VCR:
Power
Input (TV)
Mute (TV)
Channel
Numbers
INPUT DISPLAY
INPUT DISPLAY
Input (TV)
Power
Channel
Numbers
Program the remote
control to recognize
the brand of your VCR
(see “Programming the
remote control to
operate your other
devices” on page 18.)
The buttons shown at
right will then control
the VCR.
Program the remote
control to recognize the
brand of your cable TV
converter/satellite receiver
(see “Programming the
remote control to operate
your other devices” on
page 18.) The buttons
shown at right will control
the cable TV converter/
satellite receiver.
CH RTN
(Channel Return)
VCR
Channel 3 4
Volume +/- (TV)
CH RTN
(Channel Return)
Channel 3 4
CBL/SAT
Volume +/- (TV)
Pic Size (TV)
Pic Size (TV)
Press “VCR” first.
VCR controls
Press “CBL/SAT” first.
TV/VCR
CT-885
CT-885
17
J3U70221A(E)P17-24
17
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a DVD player:
Power
Input (TV)
Display
Mute (TV)
Number
buttons
INPUT DISPLAY
Program the remote
control to recognize the
brand of your DVD
player (see
“Programming the
remote control to
operate your other
devices” below.) The
buttons shown at right
will then control the
DVD player.
Volume +/- (TV)
DVD
Pic Size (TV)
DVD MENU
LM
ENTER
DVD controls
Press “DVD” first.
DVD Skip/Search
/
TOP Menu
DVD Clear
CT-885
Programming the remote control to operate
your other devices
INPUT DISPLAY
Display
This remote control is pre-programmed to operate most Toshiba
satellite receivers, VCRs, and DVD players. To control a non-Toshiba
device (or a Toshiba device that the remote control is not pre-programmed
to operate), you must follow the steps below to program your remote control.
1. Refer to the code tables (on pages 19 and 20) to find the
corresponding code for your device.
Channel
Numbers
TV
VCR
DVD
CBL/SAT
If more than one code is listed, try each one separately until you
find the one that works.
2. If you are programming the remote control to operate your:
• Cable TV converter/satellite receiver: Press “CBL/SAT.”
• VCR: Press “VCR.”
• DVD player: Press “DVD.”
3. While holding down DISPLAY, press the Channel Number buttons
to enter the three-digit code for your device within 10 seconds.
Note:If you do not enter the code within 10 seconds from step 3,
or if you enter the wrong code, this operation is canceled.
4. Point the remote control at the cable TV converter/satellite
receiver, VCR or DVD player, and press POWER to test the code.
• If the device responds, you entered the correct code.
CT-885
•
If the device does not respond, repeat steps 1–4 using another code.
5. Press “TV” to control the TV.
Notes:
For future reference, write down the codes you used:
• When shipped from the factory, the remote
control is set to operate your TV.
Cable TV converter/satellite receiver code _____________________
VCR code ______________________________________________
DVD player code _________________________________________
• Each time you replace the batteries, you
must reprogram the remote control.
• Some newer VCRs are capable of working
on either of two remote codes. These VCRs
have a switch labeled “VCR1/VCR2.”
If your VCR has this kind of switch and
does not respond to any of the codes for
your VCR, set the switch to the other
position (VCR1 or VCR2) and reprogram
the remote control.
18
J3U70221A(E)P17-24
18
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV converter/satellite receiver, VCR and DVD player code tables
[For CBL/SAT Mode]
CABLE Box
Brand
Code
Brand
Code
Brand
Code
ABC
061, 062, 063, 082, Jerrold
084, 087, 091, 092,
062, 069, 071, 082, Scientific Atlanta 063, 078, 079, 080,
086, 089, 091, 096
072, 096
091, 092, 104
090
088, 098, 101, 105
096, 098
Magnavox
Sears
095
062
Archer
065, 092, 097, 099 Memorex
Signature
Cableview
Century
Citizen
064, 094
092
Multi Canal
Novavision
Panasonic
Signature 2000 096
Sprucer
Starcom
101
081, 085
090, 092, 097
081, 083, 085
087
066, 067, 068, 070, Stargate
072, 073, 074, 075, Sylvania
069, 082, 087, 096,
103, 104
069, 090
095, 100
090
Contec
083, 085, 086, 088, Philco
093, 098
093
091
061, 062
069, 070, 094
Philips
Diamond
Eagle
GE
091, 092
076, 077
061, 062
092, 097, 099
064, 081
065
TeleView
Texscan
Tocom
U. S. Electronics 087, 096, 098
United Cable
Universal
Pioneer
100
071, 084, 085
Gemini
Proscan
Radio Shack
RCA
General Instruments 062, 089, 096
Hamlin
Hitachi
Jasco
093
082
062, 095, 096
097
Realistic
Recoton
Samsung
065, 092, 097, 099,
102, 103
102
077, 090
Wards
096
Satellite
Brand
Code
Brand
Code
Brand
Code
Alphastar
Chaparral
DISH Network
Drake
038, 059
034
Hughes Network 019
Systems
Realistic
Samsung
Sony
030
059
057
Intersat
048
014, 055
057
025, 026, 037, 054
024
020, 040, 044, 046, Janeil
027
017, 057
029
060
058
036, 052
015, 042
008, 009, 013
022, 023, 030
008, 009, 013, 016
Star Choice
Star Trak
STS
050, 053
018, 041, 051
057
027
008, 009, 013
JVC
Echostar
Express Vu
Fujitsu
Kenwood
Magnavox
Optimus
Pansat
Toshiba
000, 001, 002, 003,
004, 005, 006, 007,
020, 031, 056
021, 028, 030, 032,
035, 039, 043, 045,
047, 058
GE
General Instruments 010, 011, 012, 022, Primestar
Uniden
Zenith
023, 031, 049
033
033
Proscan
Radio Shack
RCA
Hitachi
Hughes
027
[For VCR Mode]
VCR
Brand
Code
Brand
Code
Brand
Code
Admiral
Aiko
Aiwa
Akai
049
019
018
Fuji
Funai
Garrard
004, 041
Marantz
005, 006, 007, 012,
014, 026, 053, 067
007, 009, 010, 016,
018, 034, 049, 063,
065, 066, 068, 075,
079
018, 073
018
Memorex
003, 004, 037, 038, GE
039, 058, 069
001, 002, 009, 040,
042, 048, 056
056, 059, 061, 081
Audiovox
Bell & Howell
Broksonic
Calix
010
Go Video
Goldstar
007, 068
005, 010, 014, 054, MGA
056, 065, 067
018, 065
020, 028, 039
008, 017
MGN
Minolta
Mitsubishi
056
010
Gradiente
024, 025, 035, 063
020, 024, 025, 028,
039, 043, 065
Carver
026
Harman Kardon 005
CCE
019
Hitachi
024, 025, 035, 037,
042, 063, 070, 080
076
Citizen
009, 010, 011, 012,
Montgomery Ward 049
Motorola
013, 014, 015, 019, JBL
049
057, 073
005
JC Penney
005, 006, 007, 008, MTC
009, 010, 023, 024, Multitech
025, 026, 035, 056, NEC
061, 063, 065
009, 046, 061
009, 012, 018
005, 006, 007, 012,
014, 037, 043, 053,
054, 067, 070
010
Colortyme
Craig
009, 010, 016, 061,
065, 079
001, 005, 009, 012, Jensen
014, 040, 048, 053, JVC
056, 057
Curtis Mathes
024, 025, 037
005, 006, 007, 014, Nikko
037, 043, 062, 063, Noblex
009
010, 049, 065
031
054, 057, 062, 065,
068, 072
036, 045, 046, 057,
061, 072, 079
012, 024, 025, 035,
042, 053, 063
Daewoo
011, 013, 015, 017,
018, 019, 057, 078 Kenwood
078
068, 082
Optimus
005, 006, 007, 012, Optonica
014, 037, 043, 053, Orion
068, 071
Daytron
Denon
Dimensia
Electrohome
Emerson
063
001, 048
Kodak
LG
010
010
053, 073, 079
061
010
061, 065, 078
026, 027, 034, 044, Philips
057, 061, 072
Panasonic
010, 020, 065
003, 008, 010, 011, Lloyds
017, 018, 020, 028, Logik
039, 054, 057, 062, LXI
Pentax
Pentex Research 014
Philco 026, 027, 063
065, 068, 072
Magnasonic
Fisher
007, 016, 021, 022, Magnavox
023, 057, 064, 068,
070, 071, 079
026, 031, 044, 057
006, 024, 043, 055
Pioneer
19
J3U70221A(E)P17-24
19
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR (Continued)
Brand
Code
Brand
Code
Brand
Code
Portland
012, 013, 015
001, 002, 048
061
Sanyo
007, 009, 016, 054, Tashiko
064, 068, 071, 075, Tatung
079, 085
008, 011, 017, 028, Technics
030, 057, 065, 072 Teknika
007, 010, 016, 021, Toshiba
022, 023, 024, 025,
010
Proscan
037
Proton
Quasar
Radio Shack
Radio Shack/
Realistic
Teac
018, 029, 037
036
045
Scott
010, 031, 065
010, 018, 065
000, 011, 021, 023,
024, 028, 030, 039,
057, 074, 078, 079
009, 010, 065
073
007, 009, 010, 016, Sears
018, 020, 021, 022,
031, 049
035, 053, 057, 063,
064, 065, 068, 071, Totevision
Radix
RCA
010
001, 002, 003, 009,
024, 025, 029, 035, Sharp
040, 042, 045, 048,
055, 056, 063, 071, Shintom
075, 079
Unitec
013, 020, 031, 049, Unitech
009
051, 060, 066
004, 025, 032, 061
049
Vector Research 005, 006, 011, 012,
053
083
Signature
Video Concepts
005, 006, 011, 012,
039, 053
009, 010, 011, 016,
018, 020, 024, 025,
031, 035, 049, 051,
056, 057, 060, 065,
066, 079
Realistic
007, 009, 010, 011, Signature 2000
016, 018, 020, 021, Singer
022, 031, 049, 051, Sony
056, 060, 065, 075,
075
047, 061
Wards
004, 032, 033, 041,
052, 058, 070, 074,
076, 077, 080
035
079
Ricoh
047
STS
Sylvania
Runco
034
018, 026, 027, 028, White Westinghouse 073
Samsung
009, 011, 038, 056,
073, 084
044, 072
XR-1000
018
Symphonic
Tandy
018, 051, 053, 073, Yamaha
079
005, 006, 007, 014,
037, 053
Sansui
006, 037, 043, 061
007
Zenith
004, 032, 034, 041,
047, 069, 086
TV/VCR Combo
Brand
Code
Brand
Code
Brand
Code
Action
078
Precision
Quasar
Realistic
Sony
078
065
079
074
Toshiba
Zenith
Totevision
057
GE
059, 062
065
065
Goldstar
Panasonic
009, 010, 065
065
[For DVD Mode]
DVD
Brand
Code
Brand
Code
Brand
Code
Aiwa
006, 015
Kenwood
Konka
037
Sampo
Samsung
Sansui
Sanyo
060
Apex
016, 017
008, 009
004, 038
039
061, 062, 086, 090
073
BOSE
Broksonic
Clarion
Classic
Daewoo
Denon
Emerson
Fisher
Funai
097
Magnavox
Memorex
Mintek
018
063, 091
064, 067
074
019
040
Sharp
020
NAD
026
Sherwood
Sony
021
Nakamichi
Norcent
Onkyo
041
011, 012, 065, 066,
068, 069, 070
027
022, 023, 024, 025
043
026, 027
028
027
044
Sylvania
Teac
Oritron
Panasonic
058
071
010, 045, 046, 047, Technics
072
GE
001, 029, 030
087
031
005, 032, 033, 034, Proscan
035
003, 007, 036, 042, RCA
088
048, 049, 050
004, 051
Techwood
Toshiba
075
Go Video
GPX
Philips
Pioneer
000, 013, 076, 077,
078
052, 053, 054, 055
001, 056
057, 058
001, 002, 059, 089
Hitachi
Yamaha
Zenith
079, 080, 081
014, 082, 092
Qwestar
JVC
Portable DVD
Brand
Code
Brand
Code
Brand
Code
Aiwa
Audiovox
093
094, 095
Panasonic
024, 096, 099
RCA
098
HTIB
Brand
Code
Brand
Code
Brand
Code
Lasonic
083
Panasonic
084
Venturer
085
[For VCR and DVD Mode]
DVD/VCR Combo
Brand
VCR Code
DVD Code
Brand
VCR Code
DVD Code
Go Video
JVC
RCA
081
082
083
087
088
089
Samsung
Sanyo
Zenith
084
085
086
090
091
092
20
J3U70221A(E)P17-24
20
05/08/2005, 10:13 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about the remote control
INPUT selects the video input source (page 29)
DISPLAY displays status information on-screen (page 38)
MUTE turns off the sound (page 36)
POWER turns the TV on and off
INPUT DISPLAY
CHANNEL NUMBERS allow direct access to channels (page 24)
Input
POWER
Mute
Display
CH RTN (Channel Return) returns to the last viewed channel
(page 24)
Channel
Numbers
TV selects TV mode
CH RTN
(Channel Return)
CH 3 / 4 cycles through programmed channels (page 23)
VOL +/- adjusts the volume level
Channel 3/4
Volume +/-
VCR
TV
VCR selects VCR mode (page 17)
CBL/SAT
Sleep
DVD
CBL/SAT selects CBL/SAT mode (page 17)
DVD selects DVD mode (page 18)
Pic Size
FAV LM
(Favorite Channels)
DVD Menu
SLEEP programs the TV to turn off at a set time (page 33)
Menu/Enter
PIC SIZE cycles through the three picture sizes: Natural,
Enter
Exit
Play
Stop
TheaterWide and full (page 31)
Pause
Skip/Search
4 ¢
FAV L/M (Favorite Channels) cycles through the channels you
programmed as favorite channels (page 24)
Rew
FF
MENU/ENTER accesses the menu system; also sets menu
selections (page 22)
TOP Menu
TV/VCR
Clear
Rec
EXIT closes on-screen menus (page 22)
CT-885
DVD MENU access the DVD menu
PAUSE pauses a videotape/DVD
PLAY plays a videotape/DVD
STOP stops a videotape/DVD
• Aim the remote control at the remote
sensor and press control buttons to
operate.
DVD SKIP/SEARCH
skips DVD chapter
• Operate the remote control within a 30
degree angle on either side of the remote
sensor, up to a distance of approx. 16 ft.
(5m).
REW rewinds a videotape/DVD
FF fast forwards a videotape/DVD
TOP MENU access the DVD TOP menu
REC starts recording a videotape
Remote
Sensor
DVD CLEAR clears input data in DVD mode
TV/VCR toggles between TV and VCR modes when viewing
while recording
Approx. 5 meters
21
J3U70221A(E)P17-24
21
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting setup
The STARTING SETUP feature appears the first time you turn on the
TV, and helps you select the menu language, specify the TV/CABLE
setting, and program channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made!
1. Press TV to select the TV mode.
2. Press POWER to turn on the TV. The starting setup function
begins and the language setup menu appears on the screen.
Press L or M to select your desired
language, then press ENTER.
3. Press L or M to select “TV” or
“CABLE”, then press ENTER.
INPUT DISPLAY
LANGUAGE
/
LANGUE
/
IDIOMA
POWER
ENGLISH
FRANÇAIS
ESPAÑOL
4. Press L or M to select “START”,
then press ENTER. If you select
“CANCEL” and press ENTER, the
:SELECT
ENTER: SET
STARTING SETUP stops and changes to the TV screen.
5. Now the “AUTO SETUP” starts. After the starting setup is com-
pleted, the TV channel appears on the screen.
• If you press the EXIT button in the process of “AUTO SETUP”
the STARTING SETUP stops and changes to the TV screen.
TV
Menu/Enter
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu
system. You can access the menu system with the buttons on the
remote control.
• When you make a menu selection, your changes occur immedi-
ately. You do not have to press MENU or EXIT to see your
changes.
Exit
• After one minute, the menu screen will automatically close if you do
not make a selection. Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
CT-885
1. Press TV to select the TV mode.
2. Press MENU, then press or until the SETUP menu appears.
SETUP
LANGUAGE
ENGLISH
CLOCK SET
TV
12:00AM
CABLE
/
CABLE
Note:
CH PROGRAM
ADD ERASE
/
ADD
The position and size of the on-screen menus
change for some program formats (such as
1080i or 720p).
:SELECT
:ADJUST
3. Press L or M to highlight LANGUAGE.
ENGLISH
12:00AM
CABLE
Note:
ADD
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
:SELECT
:ADJUST
4. Press or to highlight your desired language.
22
J3U70221A(E)P17-24
22
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding channels to the TV’s memory
When you press CH 3 or 4, your TV will stop only on the channels you
have stored in the TV’s channel memory. Follow the steps below to
program channels into the channel memory.
INPUT DISPLAY
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
Channel
Numbers
To add channels automatically:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the SETUP menu.
3. Press L or M until the TV/CABLE
selection is highlighted.
TV
Channel 3 4
SETUP
4. Press or to highlight either
Menu
LANGUAGE
ENGLISH
CLOCK SET
/
12:00AM
TV
TV or CABLE, depending on
which you use.
TV
CABLE
/
CABLE
CH PROGRAM
ADD ERASE
/
ADD
If you use an antenna, choose TV.
If you use cable, choose CABLE.
:SELECT
:ADJUST
5. Press M until the CH PROGRAM selection is highlighted.
6. Press to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
7. When channel programming is complete, the message “COMPLETED”
appears.
8. Press CH 3 or 4 to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
CT-885
To add or erase channels manually:
1. Press TV to select the TV mode.
2. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using the Channel Number buttons.
3. Press MENU, then press or to
In addition to cycling through your
programmed channels, the Channel 3
buttons will also cycle through the video
input sources (page 29) in the order
illustrated below.
display the SETUP menu.
4. Press L or M to highlight ADD/
/
4
SETUP
LANGUAGE
CLOCK SET
ENGLISH
ERASE.
12:00AM
CABLE
TV
/
CABLE
CH PROGRAM
ADD ERASE
5. Press or to select ADD or
ERASE, whichever function you
want to perform.
/
ADD
/
ERASE
:SELECT
:ADJUST
ANT (programmed channel)
VIDEO1
VIDEO2
6. Repeat steps 1-5 for other channels you want to add or erase.
PC
ColorStream HD
HDMI
Changing channels
To change to the next programmed channel:
Press Channel
3
/
4
on the TV or CH
3
/
4
on the remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
23
J3U70221A(E)P17-24
23
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Press TV to select the TV mode.
2. Select the first channel you want to view.
3. Select a second channel using the Channel Number buttons (0-9, 100).
4. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV will switch back and forth
between the two channels.
INPUT DISPLAY
Programming your favorite channels
You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
Channel
Numbers
You can still use Channel 3 4 to scan through all the channels you
/
programmed in the TV’s memory.
CH RTN
TV
To program your favorite channels:
1. Press TV to select the TV mode.
2. Select a channel you want to program.
3. Press MENU, then press or to display the OPTION menu.
4. Press L or M to highlight FAVORITE CH.
Channel 3 4
Menu/
Enter
OPTION
ON TIMER
OFF
FAVORITE CH
CH LABEL
VIDEO LABEL
FAV
Exit
:SELECT
:ADJUST
5. Press to display the FAVORITE CH menu. SET/CLEAR will be
highlighted.
FAVORITE CH
SET CLEAR
:CH002
/
TV CABLE
SETUP CH
0
0
0
0
0
0
0
0
0
0
0
0
RETURN
:SELECT
:ADJUST
ENTER:SET
6. Press or to highlight SET and press ENTER.
7. Press EXIT to return to normal viewing.
8. Repeat steps 1-7 for up to 12 channel.
CT-885
To select your favorite channels:
Press the FAV L / M buttons on the remote control to select your
favorite channels.
The FAV L / M buttons will not work until you have programmed
your favorite channels.
To clear your favorite channels:
1. Press TV to select the TV mode.
2. Select a channel you want to clear.
3. Press MENU, then press or to display the OPTION menu.
4. Press L or M to highlight FAVORITE CH.
5. Press to display the FAVORITE CH menu. SET/CLEAR will be
highlighted.
6. Press or to highlight CLEAR.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
FAVORITE CH
SET CLEAR
:CH002
/
TV CABLE
SETUP CH
0
0
0
0
0
0
0
0
0
0
0
0
RETURN
:SELECT
:ADJUST
ENTER:CLEAR
7. Press ENTER until “0” replaces the channel number you want to erase.
8. Press EXIT to return to normal viewing.
9. Repeat steps 1-8 for the other channels.
24
J3U70221A(E)P17-24
24
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LOCKS menu
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME
TIMER, PANEL LOCK, and NEW PASSWORD functions.
Note:
The password you programmed is also used in
the LOCKS menu; see pages 26-27.
Selecting a password
You can use these functions after entering the correct password.
To select your password and access the LOCKS menu:
1. Press TV to select the TV mode.
2. Press MENU, then press or to highlight the LOCKS menu.
3. Press L or M to display the password entering mode.
LOCKS
----
NEW PASSWORD
INPUT DISPLAY
SELECT:[0-9]
ENTER : SET
EXIT : END
Display
Channel
Numbers
4. Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the LOCKS menu for the first time, select a
four-digit number to be your password. Press ENTER.
TV
LOCKS
NEW PASSWORD
Menu/
Enter
SELECT:[0-9]
ENTER : SET
EXIT : END
5. Enter the password again to confirm it, and then press ENTER.
The LOCKS menu appears.
If the wrong password is entered, “ERROR” blinks about 4
seconds.
Exit
LOCKS
CONFIRM PASSWORD
SELECT:[0-9]
ENTER : SET
EXIT : END
6. You may now set up the LOCKS menu. See “Locking channels”
(page 26), “Locking the video inputs” (page 26), “Setting the
GameTimerTM” (page 27) or “Using the panel lock feature” (page
27).
To change your password:
CT-885
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password.
Press ENTER. The LOCKS menu appears.
5. Press L or M to highlight NEW PASSWORD and press to
display the NEW PASSWORD menu.
6. Use the Channel Number buttons (0-9) to enter a new code. Press
ENTER.
7. Enter the password again to confirm it, and then press ENTER.
8. Press EXIT to return to normal viewing.
Note:
If you forget your password, press DISPLAY
four times within five seconds while the TV is
in password entering mode. This allows you
to reset your password.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
25
J3U70221A(E)P25-28
25
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
1. Press TV to select the TV mode.
INPUT DISPLAY
2. Use the Channel Number buttons (0-9 and 100) to display the
television channel you wish to lock.
3. Press MENU, then press or to display the LOCKS menu.
4. Press L or M to display the password entering mode.
5. Use the Channel Number buttons
Channel
Numbers
(0-9) to enter your password, then
press ENTER. The LOCKS menu
appears.
TV
LOCKS
LOCK
CH LOCK
VIDEO LOCK
OFF
OFF
GAME TIMER
6. Press L or M to highlight CH
LOCK and press to display the
CH LOCK menu.
Menu/
Enter
:SELECT
:ADJUST
7. Press or to select the follow-
ing:
• SET– to set the channel as one
to be locked. Then press
ENTER.
• CLEAR– to clear all channels
from the list of locked channels.
Then press ENTER.
CH LOCK
:CH 002
SET
/
CLEAR
TV CABLE
LOCKED CH
0
0
0
0
0
0
0
0
0
Exit
RETURN
:SELECT
:ADJUST
ENTER:SET
8. Repeat steps 1 through 7 to lock other channels. When you are
finished locking channels, press EXIT to return to normal viewing.
If you try to tune a locked channel, the TV will not display it, but will
display the nearest unlocked channel.
Note:
After programming CH LOCK, change
channels before turning off the television.
To unlock channels:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press L or M to highlight CH LOCK and press to display the
CH LOCK menu.
INPUT DISPLAY
INPUT
Channel
Numbers
6. Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
7. Press EXIT to return to normal viewing.
TV
Locking the video inputs
Menu/
Enter
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, COLORSTREAM HD, HDMI, PC) and channels 3
and 4. You will not be able to select the input sources with the INPUT
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press L or M to highlight VIDEO
Exit
Note:
LOCK.
After programming VIDEO LOCK, change
channels or press the INPUT key before
turning off the television.
LOCKS
6. Press or to select:
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
OFF
VIDEO
OFF
• OFF: Unlocks all video input
OFF
/
/
VIDEO+
sources.
•
VIDEO: Locks VIDEO1, VIDEO2,
:SELECT
:ADJUST
COLORSTREAM HD, HDMI, PC
.
Note:
• VIDEO +: Locks VIDEO1, VIDEO2, COLORSTREAM HD,
HDMI, PC, channel 3 and channel 4. This option should be used
if you use the antenna terminal to play a video tape.
7. Press EXIT to return to normal viewing.
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
26
J3U70221A(E)P25-28
26
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
To unlock the video inputs:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press L or M to highlight VIDEO LOCK and press or to
highlight OFF.
Notes:
• Interactive video games that involve shooting
a gun type of joy-stick at an on-screen target
may not work on this TV.
• To deactivate the GameTimer, set the VIDEO
LOCK to OFF (see “Locking the video inputs”
page 26).
6. Press EXIT to return to normal viewing.
Setting the GameTimerTM
With the GameTimerTM feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
video game (30, 60, 90 or 120 minutes).
To set up the GameTimer:
1. Press TV to select the TV mode.
INPUT DISPLAY
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press L or M to highlight GAME TIMER.
6. Press or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
Channel
Numbers
7. Press EXIT to return to normal
TV
viewing. After the GameTimer is
programmed, the display will
LOCKS
appear briefly every ten minutes to
remind you that the GameTimeris
operating.
LOCK
CH LOCK
VIDEO LOCK
OFF
OFF
Menu/
Enter
GAME TIMER
OFF
/
30
/
60
/
90
/
120
When the programmed time is
reached, the TV will change
channels automatically and enter
VIDEO LOCK mode.
:SELECT
:ADJUST
Exit
Using the panel lock feature
You can lock the top panel buttons to prevent your settings from being
changed accidentally (by children, for example). When the panel lock
is set to ON, all control buttons on the TV top panel (except POWER)
do not operate.
TV top panel
To lock the panel:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press L or M to highlight PANEL
LOCK and press or to highlight
VOLUME –
ON.
LOCKS
If a button on the top panel is
PANEL LOCK
NEW PASSWORD
ON
/
OFF
pressed, the message “NOT
AVAILABLE” appears.
:SELECT
:ADJUST
To unlock the panel:
Press and hold the VOLUME – button on the TV top panel for about
10 seconds until the message "PANEL LOCK:OFF" appears on-
screen.
You also can unlock the panel using the menus:
1. Press TV to select the TV mode.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
2. Press MENU, then press or to display the LOCKS menu.
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press L or M to highlight PANEL LOCK, and then press or to
highlight OFF.
27
J3U70221A(E)P25-28
27
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling channels
Channel labels appear above the channel number display each time
you turn on the TV, select a channel, or press the DISPLAY button.
You can choose any four characters to identify a channel.
INPUT DISPLAY
To create channel labels:
1. Press TV to select the TV mode.
2. Select a channel you want to label.
3. Press MENU, then press or until
the OPTION menu appears.
4. Press L or M to highlight CH LABEL.
5. Press to display the CH LABEL
menu. SET/CLEAR will be high-
lighted.
Channel
Numbers
OPTION
ON TIMER
OFF
FAVORITE CH
CH LABEL
VIDEO LABEL
TV
:SELECT
:ADJUST
6. Press or to highlight SET, then
press ENTER.
7. Press ENTER to highlight LABEL.
8. Press or to enter a character in
the first space. Press the button
repeatedly until the character you
Menu/
Enter
CH LABEL
:CH002
SET
/
CLEAR
LABEL
–
–
–
–
RETURN
:SELECT
:ADJUST
ENTER :SET
want appears on the screen. Press ENTER.
9. Repeat step 8 to enter the rest of the characters.
If you would like a blank space in
Exit
the label name, you must choose
an empty space from the list of
CH LABEL
:CH 025
characters; otherwise, a dash will
appear in that space.
SET
LABEL
–
–
–
–
RETURN
10. Repeat steps 1-9 for other chan-
:SELECT
ENTER
:
SET
nels. You can assign a label to each
channel.
11. Press EXIT to return to normal viewing.
Note:
CT-885
The character will change as below.
–
+
SPACE
–
To erase channel labels:
1. Press TV to select the TV mode.
2. Select a channel with a label.
3. Press MENU, then press or until the OPTION menu appears.
4. Press L or M to highlight CH LABEL.
5. Press to display the CH LABEL menu. SET/CLEAR will be
highlighted.
6. Press or to highlight CLEAR.
7. Press ENTER.
8. Repeat steps 1-7 to erase other channel labels.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
28
J3U70221A(E)P25-28
28
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the video input source
SOURCE SELECTION
Press INPUT to view a signal from
another device connected to your TV,
such as a VCR or DVD player. You can
select ANT, VIDEO 1, VIDEO 2,
ColorStream HD, HDMI or PC depend-
ing on which input jacks you used to
connect your devices (see “Connecting
your TV” on page 9).
0. ANT
1. VIDEO1
2. VIDEO2
3. ColorStream HD
4. HDMI
5. PC
Please note the following regarding
the HDMI source selection:
[0-5]
:
SELECT
The HDMI IN jack is not intended for
connection to and should not be used
with a PC (personal computer). See
“Connecting an HDMI or a DVI device to
the HDMI input” on page 15 and
“Connecting a PC” on page 16 for
details.
Pressing INPUT on the remote
control displays the current signal
source (press INPUT again or 0-5
to change)
You also can use the Channel 3 / 4 buttons to select the video input
source. In addition to cycling through your programmed channels
(page 23), the Channel 3 / 4 buttons will also cycle through the
video input sources, in the order illustrated below.
ANT (programmed channel)
VIDEO1
VIDEO2
PC
ColorStream HD
HDMI
INPUT DISPLAY
INPUT
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
–
: Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
TV
DTV : Digital TV set-top box
SAT
: Satellite box
CBL : Cable box
Menu
To label the video input sources:
1. Press TV to select the TV mode.
2. Press MENU, then press or to
display the OPTION menu.
3. Press L or M to highlight VIDEO
LABEL.
OPTION
ON TIMER
OFF
/
OFF
/
SET
FAVORITE CH
CH LABEL
VIDEO LABEL
Exit
4. Press to display the VIDEO
LABEL menu.
:SELECT
:ADJUST
5. Press L or M to highlight the video
source you want to label.
VIDEO LABEL
6. Press
or
to select the desired
1.VIDEO1
2.VIDEO2
3.ColorStream HD
4.HDMI
-
-
-
-
/
VCR
/
DVD
SAT
/
/
DTV
CBL
label for that input source.
7. Press EXIT to return to normal
viewing.
:SELECT
:ADJUST
Setting the clock
You must set the clock before you can program the ON timer.
CT-885
To set the clock: (Example: 8:30 AM)
1. Press TV to select the TV mode.
2. Press MENU, then press or to
SETUP
LANGUAGE
ENGLISH
display the SETUP menu.
3. Press L or M to highlight CLOCK
SET.
CLOCK SET
TV
12:00AM
CABLE
/
CABLE
Note:
CH PROGRAM
ADD ERASE
/
ADD
If the power source for the TV is interrupted
(for example, the power cord is unplugged or
a power failure occurs), you will need to reset
the clock.
4. Press to highlight the hour
position.
5. Press L or M to set the hour, then
press to highlight the minute
position.
6. Press L or M to set the minutes,
then press EXIT to return to normal
viewing.
:SELECT
:ADJUST
SETUP
LANGUAGE
CLOCK SET
ENGLISH
Note:
8:30AM
CABLE
TV
/
CABLE
CH PROGRAM
ADD ERASE
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
/
ADD
:SELECT
:ADJUST
29
J3U70221A(E)P29
29
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the ON timer
This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to “DAILY,” the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.
INPUT DISPLAY
To set the on timer: (Example: Turning on the TV to channel 012 at
6:30 AM, DAILY)
1. Press TV to select the TV mode.
2. Set the clock, if you have not already done so (see above).
3. Press MENU, then press or to display the OPTION menu.
4. Press L or M to highlight ON TIMER.
TV
5. Press or to highlight SET, then press ENTER. The ON TIMER
menu appears. Press to set the time.
6. Press L or M to set the desired hour,
Menu/
Enter
then press
.
ON TIMER
ON TIMER
6:00AM
CH002
CLEAR
RETURN
:SELECT
:ADJUST
Exit
7. Set the desired minutes and channel,
as in step 6.
ON TIMER
ON TIMER
6:30AM
CH002
CLEAR
RETURN
:SELECT
:ADJUST
Note:
8. Press to select ONCE or DAILY.
9. Press EXIT to return to normal
viewing.
After a power failure or disconnection of the
power, the timer settings will be lost.
ON TIMER
ON TIMER
6:30AM
CH012
DAILY
ONCE
/
/
CLEAR
SET
RETURN
:ADJUST
ENTER
:
To cancel the on timer:
Select CLEAR in step 8 above.
Press EXIT to return to normal viewing.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
30
J3U70221A(E)P30
30
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the wide-screen picture formats
(480i and 480p signals only)
You can view 480i and 480p format programs in a variety of picture
sizes—Natural, TheaterWide, and Full.
INPUT DISPLAY
The way the image displays in any of the picture sizes will vary
depending on the format of the program you are viewing. Select the
picture size that displays the current program the way that looks best
to you.
Channel
Numbers
Selecting the picture size
1. Press TV to select the TV mode.
TV
2. Press PIC SIZE on the remote control.
3. Press the corresponding number button (0-2) to select the desired
picture size, as described below and on the next page.
PICTURE SIZE
0. NATURAL
1. THEATER WIDE
2. FULL
Pic Size
[0-2]
:
SELECT
Natural picture size
•
The image is displayed close to its originally formatted proportion.
Some program formats will display with side bars and/or bars at the
top and bottom.
Natural picture size example: The way the image displays will vary
depending on the format of the program you are currently watching.
Note:
You also can change the picture size by
selecting PICTURE SIZE in the SETUP
menu.
SETUP
Conventional (4:3) picture in
Natural size on your wide-screen
TV
Conventional (4:3) picture
on a conventional TV
screen
CLOSED CAPTION
OFF
PICTURE SIZE
CINEMA MODE
ASPECT
FILM
ON
16
BACK LIGHTING
:SELECT
:ADJUST
TheaterWide picture size (for 4:3 format programs)
•
The center of the picture remains
close to its original proportion,
but the left and right edges are
stretched wider to fill the screen.
The top and bottom edges of the
picture may be hidden.
Notes:
• The PICTURE SIZE feature is not available
for some program formats (such as 1080i
or 720p). Such formats will display in
Full picture size.
• Using these functions to change the picture
size (i.e., changing the height/ width ratio)
for any purpose other than your private
viewing may be prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
•
TheaterWide picture size
example
Full picture size (for 16:9 source programs)
•
If receiving a 4:3 format program,
the picture is stretched wider to fill
the width of the screen, but not
stretched taller.
•
None of the picture is hidden.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
Full picture size example
31
J3U70221A(E)P31-36
31
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the cinema mode
INPUT DISPLAY
When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press TV to select the TV mode.
2. Press MENU, then press or
SETUP
until the SETUP menu appears.
TV
CLOSED CAPTION
OFF
3. Press L or M to highlight CINEMA
MODE, then press or to select
FILM.
PICTURE SIZE
CINEMA MODE
ASPECT
FILM
ON
16
/
VIDEO
BACK LIGHTING
:SELECT
:ADJUST
To set the CINEMA MODE to VIDEO (off):
Press or to select VIDEO in step 3 above.
Menu
Using the ASPECT feature
When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table).
Automatic aspect size
(automatically selected
when ASPECT is ON)
Aspect ratio of signal source
4:3 Normal
16:9 Full
Natural
Full
4:3 Letter box
Not defined
TheaterWide
User-set mode
CT-885
If the signal does not include aspect information, the picture size you
selected on pages 31 is displayed.
To turn on the ASPECT feature:
1. Press TV to select the TV mode.
2. Press MENU, then press or until the SETUP menu appears.
3. Press L or M to highlight ASPECT, then press
or to select
ON.
SETUP
CLOSED CAPTION
OFF
PICTURE SIZE
CINEMA MODE
ASPECT
FILM
ON
16
/
OFF
BACK LIGHTING
:SELECT
:ADJUST
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
32
J3U70221A(E)P31-36
32
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the sleep timer
You can set the TV so it turns off automatically.
INPUT DISPLAY
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will increase 10 minutes for each
press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m). After
the sleep timer is programmed, the display will appear briefly every
ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
TV
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
Menu
Using the closed caption feature
The Closed Caption feature has two options:
•
Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listing as “CC”).
Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your viewing
area).
Sleep
•
To view captions or text:
1. Press TV to select the TV mode.
Note:
A closed caption signal may not be decoded
in the following situations:
• when a video tape has been dubbed
• when the signal reception is weak
• when the signal reception is non-standard
2. Tune the TV to the desired program.
3. Press MENU, then press or to display the SETUP menu.
4. Press L or M to highlight CLOSED CAPTION.
SETUP
CLOSED CAPTION
OFF
C2
C1
/
/
T1
/
T2
/
OFF
PICTURE SIZE
CINEMA MODE
ASPECT
FILM
ON
16
BACK LIGHTING
:SELECT
:ADJUST
5. Press or to select the desired Closed Caption mode, as
follows:
• To view captions, select C1 or C2 (C1 displays translation of the
primary language in your area).
Note: If the program or video you selected is not closed-
captioned, no captions will display on-screen.
• To view text, select T1 or T2. Note: If text is not available in your
viewing area, a black rectangle may appear on-screen. If this
happens, set the Closed Caption feature to OFF.
• To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
33
J3U70221A(E)P31-36
33
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Selecting the picture mode
INPUT DISPLAY
You can select four picture modes—Sports, Standard, Movie, and
Memory—as described in the following table:
Mode
Picture Quality
SPORTS
Bright and dynamic picture (factory-set)
STANDARD Standard picture quality (factory-set)
MOVIE
MEMORY
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see
“Adjusting the picture quality”)
TV
To select the picture mode:
1. Press TV to select the TV mode.
Menu
2. Press MENU, then press or to display the PICTURE menu.
3. Press L or M to highlight MODE.
PICTURE
MODE
SPORTS
SPORTS
/
STANDARD
/
MOVIE/MEMORY
Exit
BRIGHTNESS
CONTRAST
COLOR
25
50
25
0
TINT
SHARPNESS
25
:SELECT
:ADJUST
4. Press or to highlight the mode you prefer.
5. Press EXIT to return to normal viewing.
Adjusting the picture quality
INPUT DISPLAY
You can adjust the picture quality to your personal preferences,
including the brightness, contrast, color, tint, and sharpness. The
qualities you choose will be stored automatically in your TV ’s memory
so you can recall them at any time.
To adjust the picture quality:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the PICTURE menu.
3. Press L or M until the item you want to adjust is highlighted.
TV
PICTURE
Menu
MODE
SPORTS
BRIGHTNESS
CONTRAST
COLOR
25
50
25
0
TINT
SHARPNESS
25
:SELECT
:ADJUST
4. Press or to adjust the level.
Exit
Selection
Pressing
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
darker
lower
paler
reddish
softer
lighter
higher
deeper
greenish
sharper
5. Press EXIT to return to normal viewing.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
34
J3U70221A(E)P31-36
34
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CableClear® feature
INPUT DISPLAY
CableClear® reduces visible interference in your TV picture. This
is useful when receiving a broadcast with a weak signal (especially a
Cable channel) or playing a video cassette or disc damaged by
repeated use.
To turn on the CableClear® feature:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the PICTURE menu.
3. Press L or M to highlight CableClear.
TV
PICTURE
Menu
ON/OFF
COOL
CableClear
COLOR
TEMPERATURE
RESET
:SELECT
:ADJUST
4. Press or to select ON.
To turn off the CableClear® feature:
Select OFF in step 4.
Exit
Selecting the color temperature
Change the picture quality by selecting from three preset color tem-
peratures—cool, medium, and warm—as described in the following
table:
Mode
Picture Quality
COOL
MEDIUM
WARM
Blueish
Neutral
Reddish
CT-885
To select the color temperature:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the PICTURE menu.
3. Press L or M to highlight COLOR TEMPERATURE.
PICTURE
OFF
CableClear
COLOR
TEMPERATURE
COOL
COOL/MEDIUM/WARM
RESET
:SELECT
:ADJUST
4. Press or to highlight the mode you prefer.
5. Press EXIT to return to normal viewing.
Resetting your picture adjustments
The RESET function returns your picture quality adjustments to the
following factory settings:
Mode .....................sports
Tint ......................... center (0)
Sharpness.............. center (25)
Color temperature .. cool
Brightness ............. center (25)
Contrast ................max (50)
Color .....................center (25)
To reset your picture adjustments:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the PICTURE menu.
3. Press L or M to highlight RESET, and then press
.
PICTURE
Note:
CableClear
COLOR
TEMPERATURE
OFF
COOL
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
RESET
:SELECT
:ADJUST
35
J3U70221A(E)P31-36
35
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
INPUT DISPLAY
Mute
Display
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.
Selecting stereo/SAP broadcasts
TV
The multi-channel TV sound (MTS) feature provides high-fidelity stereo
sound. MTS also can transmit a second audio program (SAP) contain-
ing a second language or other audio information.
Menu
Note: The MTS feature is not available in VIDEO mode.
When the TV receives a stereo or SAP broadcast, the word “STEREO”
or “SAP” displays on-screen every time you turn the TV on, change the
channel, or press DISPLAY.
To listen to stereo sound:
1. Press TV to select the TV mode.
Exit
2. Press MENU, then press or to display the AUDIO menu.
3. Press L or M to highlight MTS.
4. Press or to highlight STR (stereo).
Notes:
• In general, you can leave your TV in stereo mode because the
TV automatically outputs the type of sound being broadcast
(stereo or mono).
Note:
A second audio program (SAP) can be heard
only on those TV stations that offer it.
•
If the stereo sound is noisy, select MONO to reduce the noise.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program’s normal audio.
AUDIO
MTS
BASS
TREBLE
BALANCE
STABLE SOUND
STR/SAP/MONO
25
25
0
OFF
:SELECT
:ADJUST
However, if you have SAP on, and the station
you are watching is not currently
5. Press EXIT to return to normal viewing.
broadcasting a second audio program, the
station’s normal audio will be output;
however, occasionally there is no sound at all
in SAP mode. If this happens, set the MTS
feature to STEREO mode.
To listen to a second audio program (SAP):
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the AUDIO menu.
3. Press L or M to highlight MTS.
4. Press or to highlight SAP. The TV speakers will output the
second audio program instead of normal audio.
5. Press EXIT to return to normal viewing.
Adjusting the sound quality
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press TV to select the TV mode.
2. Press MENU, then press or until the AUDIO menu appears.
3. Press L or M to highlight the item you want to adjust.
Note:
Adjusting the sound quality (bass, treble and
balance) does not affect the sound that is
output from the headphone jack.
AUDIO
MTS
STEREO
BASS
25
25
TREBLE
BALANCE
STABLE SOUND
0
OFF
:SELECT
:ADJUST
4. Press or to adjust the level.
Note:
•
makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
•
makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
36
J3U70221A(E)P31-36
36
05/08/2005, 10:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting your audio adjustments
INPUT DISPLAY
The RESET function returns the audio adjustments to the following
factory settings:
Bass ..................center (25)
Treble ............... center (25)
Balance ............ center (0)
To reset your audio adjustments:
1. Press TV to select the TV mode.
TV
2. Press MENU, then press or to display the AUDIO menu.
3. Press L or M to highlight RESET, and then press
.
Menu
AUDIO
WOW SRS 3D
FOCUS
TruBass
HDMI
RESET
OFF
OFF
OFF
HDMI
/
DVI
:SELECT
:ADJUST
Using the StableSound® feature
The StableSoundfeature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the StableSound® feature:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the AUDIO menu.
3. Press L or M to highlight STABLE SOUND.
4. Press or to highlight ON.
AUDIO
MTS
STEREO
BASS
25
25
0
TREBLE
BALANCE
STABLE SOUND
ON
/
OFF
:SELECT
:ADJUST
To turn off the StableSound® feature:
Highlight OFF in step 4 above.
Notes:
Using the WOW™ surround sound feature
• If the broadcast is monaural, the SRS 3D
effect will not work.
• The headphone jack do not output any of
WOW is a special combination of SRS Labs audio technologies that
creates a thrilling surround sound experience with deep, rich bass
from stereo sound sources. Your TV’s audio will sound fuller, richer, and
wider. WOW consists of three features; SRS 3D, FOCUS, and TruBass.
To adjust the WOW feature:
the WOW audio features.
1. Press TV to select the TV mode.
2. Select STEREO mode (see “selecting stereo/SAP broadcasts” on
page 36).
3. Press MENU, then press or to display the AUDIO menu.
4. Press or to highlight the desired WOW feature you want to adjust.
• SRS 3D — To turn on or off the surround sound effect.
• FOCUS — To turn on or off the vocal emphasis effect.
• TruBass — To select your desired bass expansion level
(HIGH, LOW or OFF).
TV
Menu
AUDIO
WOW SRS 3D
FOCUS
TruBass
HDMI
RESET
ON
/
OFF
OFF
OFF
HDMI
:SELECT
:ADJUST
5. Press or to adjust the item.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
WOW, SRS and
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
37
J3U70221A(E)P37-40
37
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the HDMI audio input source
INPUT DISPLAY
See page 15 for details on connecting an HDMI or a DVI device to the TV’s HDMI input.
If you connect a DVI device, to hear audio you must also connect the analog
audio cables to the HDMI audio IN jacks (see page 15). Set the HDMI audio input
setting to “DVI” with this connection.
If you connect an HDMI device and play media with digital audio output, to hear
digital audio set the HDMI audio input setting to “HDMI” with this connection.
If you connect an HDMI device but play media with analog audio output (for
example, certain CDVs do not output digital audio), to hear audio you must also
connect the analog audio cables to the HDMI audio IN jacks (see page 15).
Set the HDMI audio input setting to “DVI” with this connection.
TV
To select the HDMI audio input source:
1. Press TV to select the TV mode.
Menu
2. Press MENU, then press or to display the AUDIO menu.
3. Press or to highlight HDMI.
4. Press or to select HDMI or DVI.
AUDIO
WOW SRS 3D
FOCUS
TruBass
HDMI
RESET
OFF
OFF
OFF
HDMI
/
DVI
:SELECT
:ADJUST
Adjusting the back lighting feature
Note:
If your TV is in a bright room, the screen image may be difficult to see.
You can use the BACK LIGHTING feature to adjust the screen bright-
ness for improved picture clarity.
The cold cathode fluorescent lamp used for
the back light on this TV has a limited life.
When areas on the screen darken, flicker, or
no longer light up, the lamp may be at the end
of its life. Contact your nearest Toshiba
Authorized Service Station.
To adjust the back lighting:
1. Press TV to select the TV mode.
2. Press MENU, then press or until the SETUP menu appears.
3. Press or to highlight BACK LIGHTING.
INPUT DISPLAY
SETUP
Display
CLOSED CAPTION
OFF
PICTURE SIZE
CINEMA MODE
ASPECT
FILM
ON
16
BACK LIGHTING
:SELECT
:ADJUST
4. Press a or to adjust the screen brightness.
Displaying on-screen information
TV
Press DISPLAY to display the following on-screen information:
• Clock
• Channel number or Video input mode selected
• Channel label (if preset)
Menu
• Stereo or SAP (second audio program) audio status
• On timer, Sleep timer (if preset)
• Picture size
STEREO
SAP
ON TIMER
12:00AM
SLEEP TIMER 2h00m
ANT
ABCD
FULL
Note:
002
CLOCK 12:00AM CABLE
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
Auto power off
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day and stops broadcasting on that channel. This feature does not work in Video input/PC mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV on
automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord from
the wall outlet to prevent the TV from turning on in your absence.
38
J3U70221A(E)P37-40
38
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture/Audio adjustments in the PC mode
There are a number of picture settings you can adjust to optimize the
performance of the unit in PC mode.
TV
PICTURE Menu
AUDIO Menu
AUDIO
Menu
PICTURE
BASS
TREBLE
25
25
25
50
25
25
25
0
BRIGHTNESS
CONTRAST
HOR POSITION
VER POSITION
PHASE
BALANCE
STABLE SOUND
WOW SRS 3D
FOCUS
0
OFF
OFF
OFF
OFF
CLOCK
TruBass
RESET
:SELECT
:ADJUST
:SELECT
:ADJUST
Exit
Example: Adjust the contrast.
1. Press TV to select the TV mode.
Notes:
• If you wish to change the on-screen
language, follow the steps 1-4 on page 22.
• If no buttons are pressed for more than
approx. 60 seconds, the PC Monitor Menu
screen will return to normal Monitor screen
automatically.
2. During PC mode, press MENU, then press or to display the
PICTURE menu.
3. Press L or M to select CONTRAST.
4. Press or to adjust CONTRAST.
5. Press EXIT to return to normal viewing.
• The PC Monitor Menu settings are not
effective for normal TV mode, DVD mode or
external input mode.
DESCRIPTION ABOUT EACH SETTING OPTION
PICTURE menu
AUDIO menu
BRIGHTNESS:
CONTRAST:
To adjust the brightness of PC Monitor screen.
To adjust the contrast of PC Monitor screen.
BASS/STREBLE/BALANCE: To adjust the sound quality of PC
mode.
HOR POSITION:
To adjust the horizontal position of the image on STABLE SOUND:
the PC Monitor screen. Each video standard will
require a different value for this setting.
To turn on or off the
StableSound® feature in PC
mode.
VER POSITION:
To adjust the vertical position of the image on WOW SRS 3D:
the PC Monitor screen. Each video standard will
To turn on or off the surround
effect in PC mode.
require a different value for this setting.
This must be adjusted after the frequency has
been set to optimize picture quality.
To minimize any vertical bars or stripes visible
on the screen background.
WOW FOCUS:
To turn on or off the vocal
emphasis effect in PC mode.
To select your desired bass
expansion level (HIGH, LOW or
OFF) in PC mode.
PHASE:
CLOCK:
WOW TruBass:
RED/GREEN/BLUE: To adjust the color temperature of the PC Monitor
screen.
WXGA INPUT:
Set to ON, when you select the WXGA mode on
the PC.
Resetting your picture/audio adjustments in the PC
mode
The RESET function returns your picture quality adjustments to the
following factory settings:
PICTURE menu
AUDIO menu
Brightness ............ center (25)
Contrast ............... max (50)
Red ...................... center (25)
Green ................... center (25)
Blue...................... center (25)
Bass ....................... center (25)
Treble..................... center (25)
Balance .................. center (0)
To reset your picture adjustments:
1. Press TV to select the TV mode.
2. Press MENU during PC mode.
3. Press 2 or 3 to select the desired menu.
4. Press L or M to highlight RESET, and then press
.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
39
J3U70221A(E)P37-40
39
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
Symptom
Solution
TV will not turn on
• Make sure the connection of the AC adapter and AC cord, then press
POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
• The MTS feature may be in SAP mode. Select STR or MONO in the MTS
menu.
Poor sound, picture OK
• The station may have broadcast difficulties. Try another channel.
• The MTS feature may be in SAP mode. Select STR or MONO in the MTS
menu.
Poor picture, sound OK
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
Cannot receive above channel 13
Unable to select a certain channel
• Make sure TV/CABLE is set to CABLE mode.
• The channel may be blocked by CH LOCK feature, or erased with the add/
erase feature.
Cannot access signal input sources (Video1,
Video2, ColorStream HD, HDMI and PC)
and/or Channels 3 and 4
• Check the VIDEO LOCK feature.
Multiple images
• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
Poor color or no color
Black box on screen
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• Select OFF in the Closed Caption menu to turn off the Closed Caption Text
mode.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly (AUDIO menu).
The remote control does not operate
• Make sure the TV • CBL/SAT • VCR • DVD mode is set properly.
• Remove all obstructions between the remote control and the TV.
• The remote control batteries may be dead. Replace the batteries.
The top panel buttons do not operate
Poor composite or S-video picture
• Check the PANEL LOCK feature.
If the TV is connected to an external A/V device (e.g., DVD player, video
game system, set-top box, etc.) always try to use the ColorStream video
jacks (and corresponding audio jacks) or the HDMI input (if available) for
connection to such external A/V device. This will reduce the amount of video
processing to be performed by the television.
Picture and sound are out of sync
As with all products that contain a digital display, in rare instances, when
viewing certain content (e.g., television broadcasts, video games, DVDs) or
with varous audio system connections, you may notice that the picture and
sound are slightly out of sync. This phenomenon can be caused by various
factors including, without limitation, video processing within the TV, video
processing in an attached gaming system, and video processing/different
compression rates used by broadcasters in their programming. You may
want to try one or more of the following suggestions, which may help to
reduce the effect of this phenomenon:
• If the TV is connected to an A/V receiver that has a programmable audio
delay feature, use this feature to help synchronize the sound to the picture.
• If you notice this phenomenon only on certain TV channels, please contact
your local broadcast, cable, or satellite provider to inform them of this
issue.
40
J3U70221A(E)P37-40
40
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Notes:
• This model complies with the specifications listed below.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
LCD panel
20.04 inches (508.9 mm diagonal)(Screen size is approximate.)
Display method
Number of pixels
Television system
Tuner type
Color TFT LCD
1366 (Horizontal) x 768 (Vertical)
NTSC standard
F-Synth
Channel coverage
VHF:
UHF:
2 – 13
14 – 69
Cable TV: 4A, A-5 – A-1, A-I, J – W, W+1 – W+84
VHF/UHF 75 ohm
Antenna input
Power source
Power consumption
Audio power
120V AC, 60 Hz with supplied AC adapter
100 W with supplied AC adapter
2.5W + 2.5 W
Speaker type
Video/Audio terminals
1.8 x 3.9 inches (45.7 x 99.1 mm), 16 ohm x 2
S-VIDEO INPUT
Y-INPUT: 1V (p-p), 75 ohm, negative sync., Mini DIN 4pin x 1
C-INPUT: 0.286V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO:
AUDIO:
1V (p-p), 75 ohm, negative sync., pin jack x 2
150 mV (rms) (30% modulation equivalent, 47k ohm), pin jack (L/R) x 5
ColorStream® (component video) INPUT
Y:
PR:
1V (p-p), 75 ohm
0.7V (p-p), 75 ohm
0.7V (p-p), 75 ohm
P
B
:
HEADPHONE
Ø3.5mm stereo mini jack x 1
HDMI INPUT: HDMI compliant (type A connector)
HDCP compliant
E-EDID* compliant
Suggested scan rates: 1080i, 480p, 480i, 720p
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC Monitor Input
Mini-Dsub 15pin x 1
Dimensions
Width: 21-13/16 inches (554 mm)
Height: 17-5/8 inches (448 mm)
Depth: 8-11/16 inches (220 mm)
19.8 Ibs. (9.0 kg)
Weight
Supplied accessories
Remote control (CT-885) with two size “AAA” batteries
AC adapter
AC cord (for AC adapter)
Owner’s Manual (This booklet)
WARNING: Always use a Toshiba-approved wall
bracket to wall mount this television. The use of any
wall bracket other than a Toshiba-approved wall
bracket to wall mount this television could result in
serious bodily injury and/or property damage. For
more information call TCL's Customer Service
Department at 1-800-268-3404.
* E-EDID = Enhanced-Extended Display Identification.
41
J3U70221A(E)P41-44
41
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Canada Warranty
for LCD Televisions, 20” and smaller
Toshiba Canada Limited, (“TCL”) makes the following limited
(5) Warranties extend only to defects in materials or workmanship
as limited above, and do not extend to any LCD Television or
parts that have been lost or discarded by you or to damage to
the LCD Television or parts caused by fires, misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use in
violation of instructions furnished by TCL; use or malfunction
through simultaneous use of this LCD Television and
connected equipment; or to units that have been modified or
had the serial number removed, altered, defaced, or rendered
illegible.
warranties to original consumers in Canada. THESE LIMITED
WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS LCD
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
LCD TELEVISIONS PURCHASED IN CANADA AND USED
ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT
LIMITATION, THE U.S.A. AND MEXICO, ARE NOT COVERED
BY THESE WARRANTIES.
LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF
CANADA, INCLUDING, WITHOUT LIMITATION, THE U.S.A.
AND MEXICO, AND USED IN CANADA ARE NOT COVERED
BY THESE WARRANTIES.
How to Obtain Warranty Service
If, after following all of the operating instructions in this manual and
reviewing the section entitled “Troubleshooting,” you find that
service is needed:
Limited One (1) Year Warranty on Parts and Labour
TCL warrants this LCD Television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU. YOU MUST DELIVER THE ENTIRE
TELEVISION TO AN AUTHORIZED TCL SERVICE DEPOT. YOU
MUST PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE TELEVISION TO AND FROM THE
SERVICE DEPOT.
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
web site at www.toshiba.ca.
(2) You must include the original bill of sale (or a copy thereof) or
other proof of purchase along with the entire LCD Television to
the Authorized Service Depot. You are responsible for all
inbound transportation and insurance charges for the LCD
Television to the Authorized Service Depot.
Rental Units
For additional information, visit TCL’s website:
The warranty for LCD Television rental units begins on the date of
the first rental or thirty (30) days after the date of shipment to the
rental firm, whichever comes first.
Limited Warranty for Commercial Units
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
TCL warrants LCD Televisions that are sold and used for
commercial purposes as follows: all parts are warranted against
defects in materials or workmanship for a period of ninety (90)
days after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE
A DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU. YOU MUST DELIVER THE
ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE
DEPOT. YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE TELEVISION TO AND
FROM THE SERVICE DEPOT.
Owner’s Manual and Product Registration
Read this owner’s manual thoroughly before operating this LCD
Television.
as possible. By registering your LCD Television you will enable TCL
to bring you new products specifically designed to meet your
needs and help us to contact you in the unlikely event a safety
notification is required. Failure to register your LCD Television does
not diminish your warranty rights.
MODIFICATION OR ERASURE OF RECORDED DATA CAUSED
BY USE, MISUSE, OR INABILITY TO USE THIS LCD
TELEVISION).
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be
commenced to enforce any obligation of TCL arising under the
warranty or under any law of Canada or any province thereof is
hereby limited to ninety (90) days from the date you discover, or
should have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any province of Canada.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide other proof
of purchase.
(2) All warranty servicing of this LCD TV must be made by an
Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if this LCD
Television is purchased in Canada from an authorized TCL
dealer and operated in Canada.
(4) Labour service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by this warranty. Reception problems
caused by inadequate antenna systems, misaligned satellite
dishes, cable television distribution, VCRs, DVD players/
recorders, personal computer level IEEE-1394 devices, and
any other connected signal source device are your
responsibility.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY
FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, WHEN AN
ACTION MAY BE BROUGHT, OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT
APPLY TO YOU UNDER SUCH CIRCUMSTANCES. [0305]
42
J3U70221A(E)P41-44
42
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
43
J3U70221A(E)P41-44
43
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
TEL.: (905) 470-5400
Service Centers:
TORONTO: 191 McNABB STREET,
MARKHAM, ONTARIO, L3R 8H2, CANADA
TEL.: (905) 470-5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND,
QUEBEC, H9J-4A1, CANADA
TEL.: (514) 390-7766
VANCOUVER: 22171 FRASERWOOD WAY,
RICHMOND, B.C., V62 1J5, CANADA
TEL.: (604) 303-2500
CableClear, ColorStream, TheaterWide and StableSound are registered trademarks of Toshiba America Consumer Products, L.L.C.
GameTimer is a trademark of Toshiba America Consumer Products, L.L.C.
Printed in Thailand
J3U70221A(E)P41-44
44
05/08/2005, 10:15 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|