L2400U/UC/UM Series
Before beginning pedestal assembly, carefully lay the front of
the LCD Panel face down on a flat, cushioned surface such as a
quilt or blanket. Leave the bottom of the unit protruding over the
edge of the surface and assemble pedestal as indicated below.
QUICK START
32/40/50L2400U (United States model)
32/40/50L2400UC (Canada model)
Pedestal Assembly Instructions
To prevent possible electric shock, protect the power cord
from being pinched when attaching the pedestal stand.
32/40/50L2400UM (Mexico model)
Extreme care should always be used when attaching the
pedestal stand to avoid damage to the LCD panel.
For safety information, please review the User’s Guide online:
For United States: support.toshiba.com
Unpack the box
Two people are required for installation to avoid injury or
damage to the TV.
The Resource Guide contains important safety precautions not included in this
document. Please review completely prior to using this product. Complete
instructions are contained in the User's Guide located on Toshiba's web site at :
For United States: support.toshiba.com
For Mexico:
http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
1. Remove the components and TV from
the box. Save the packing materials in
case you need them later.
For Mexico:
http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
32L2400U/UC/UM
32L2400U/UC/UM
32L2400U/UC/UM
32L2400U/UC/UM
B
C
D
2. Remove the documentation for
important information.
A High-Definition signal is needed to receive a High-Definition picture.
Once you have a High-Definition signal you need to connect it to a
High-Definition input on your TV. Not all channels are currently
broadcasting in HD. Standard analog TV channels and HD channels, even
on the same network, broadcast on different channels. (Example: ABC
analog may be on channel 4, while ABC-HD may be on channel 104.)
M4 ; L12mm
M5 ; L14mm
Notice
x 1 (32L2400U/UC/UM)
x 1 (32L2400U/UC/UM)
x 4 (32L2400U/UC/UM)
x 2 (32L2400U/UC/UM)
• Subject to Change.
D
Product specifications, configurations, prices,
system/component/options availability are all
subject to change without notice.
32L2400U/UC/UM model
A
Get detailed product information:
Check the components
L2400U series: A comprehensive User's Guide for your model
is available at support.toshiba.com, as well as up-to-date
• For the United States, the Standard Limited
Warranty is located at
support.toshiba.com/warranty.
• For Canada, the terms and conditions of
the Limited One (1)Year Warranty on Parts and
Labour can be found at
www.toshiba.ca/support Click on Televisions,
Select Warranty, then Select Standard Warranty
& Service Plans and Select Flat Panel
Television (bilingual)
Your TV comes with:
• Remote control and batteries
• Several documents, including the Resource
Guide, and Standard Liminted Warranty.
• Pedestal stand and hardware
• All other cables and adapters are sold
separately.
product information.
L2400UC series: For up-to-date product information,
For detailed product specifications, Select Product, then
select Model and select Model Number.
L2400UM series:
A comprehensive User's Guide for your model is available at
ntacto.aspx?ID=SPT"
B
B
40/50L2400U/UC/UM
40/50L2400U/UC/UM
40/50L2400U/UC/UM
40/50L2400U/UC/UM
40L2400U/UC/UM
50L2400U/UC/UM
B
C
D
E
F
LEFT x 1 (40/50L2400U/UC/UM)
RIGHT x 1 (40/50L2400U/UC/UM)
• If any items are missing or damaged, notify
your dealer immediately.
M4 ; L8mm
M4 ; L12mm
M5 ; L10mm
x 1 (40/50L2400U/UC/UM)
x 4 (40/50L2400U/UC/UM)
x 4 (40L2400U/UC/UM)
x 4 (50L2400U/UC/UM)
40”
50”
40”
50”
Choosing a location for your LED TV
Observe the following safety precautions:
40/50L2400U/UC/UM model
To display your TV on the included Pedestal Stand:
To display your TV using a Wall Bracket:
40’
50’
E
F
Be sure to remove the pedestal stand before mounting your TV with a
wall bracket. Always use a wall bracket Listed by an independent
laboratory (such as UL, CSA, ETL) that is appropriate for the size and
weight of the TV:
1. Read and follow the pedestal assembly instructions section in this document
Before beginning pedestal assembly, carefully lay the TV facedown on a
flat, cushioned surface such as a quilt or blanket. Leave the bottom of the
unit protruding over the edge of the surface and assemble the pedestal as
indicated below.
40’
50’
D
D
Two people are required for installation to avoid injury or
damage to the TV.
B
C
Extreme care should always be used when attaching or removing the pedestal
stand to avoid damage to the display panel.
1. Unplug and remove any cables and/or other component connectors
from the rear of the TV.
2. Assemble the pedestal stand with the hardware provided.
3. After assembling the pedestal, place the TV on a sturdy, level surface that can
support the weight of the TV.
A
2. Follow the instructions provided with your wall bracket. Before
proceeding, make sure the appropriate bracket(s) are attached to the
wall and the back of the TV as described in the instructions provided
with the wall bracket.
4. Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure.
Always place the TV on a sturdy, level, stable surface that can support
the weight of the unit. Secure the TV using one of the following
methods:
(1) Secure the TV with a mounting screw (Recommended).
• Place the TV on a sturdy surface that has a sufficient
thickness and screw the unit on the surface securely by using
the mounting screw and the fall-prevention screw hole.
• If secured to furniture or other movable objects, the furniture must
be secured to an immovable structure using the method shown in
item 2 below.
Register Your Toshiba Television
Always use the screws supplied or recommended by
the wall mount manufacturer.
Enhance your ownership experience by taking a few minutes to register your Toshiba product at register.toshiba.com (for L2400U
and L2400UM series) or support.toshiba.ca/warranty/ (for L2400UC series). Completing product registration allows Toshiba to
provide you with product information updates, special offers and promotions. Failure to complete product registration will not
diminish your rights under the Standard Limited Warranty.
VESA Mounting Pattern
TV Size
32"
40"
Hole Pattern (H x V)
200mm x 200mm
200mm x 200mm
400mm x 200mm
Screw Size
M6
M6
M8
50"
(2) Secure the TV with a sturdy strap to a wall stud, pillar, or
other immovable structure. When connecting the strap:
- attach the strap to the TV using the hooks on the back of
the TV, the clips on the pedestal, or the hole in the base of
the pedestal as available.
If you are experiencing a technical problem or have questions regarding operation, authorized service centers,
warranty or parts, please contact our Customer Support Center at:
For L2400U series (United States model):
- make sure the strap is tight, secure, and parallel to the floor.
VESA Mounting Pattern
50” TV
32” TV
40” TV
VESA Mounting Pattern
VESA Mounting Pattern
(800) 631-3811 From Inside the United States
(949) 583-3050 From Outside the United States
For L2400UC series (Canada model):
1-800-268-3404 From within Canada
For L2400UM series (Mexico model):
9126-5165 and 9126-5166 for Mexico
01-800-712-67-64 lada 800 for Mexico
Many questions regarding parts, service, and warranties can be answered by visiting the Customer Support Section
of our website:
L2400U series: support.toshiba.com
Two stand screws
Hook Sturdy strap
(as short as possible)
L2400UM series: http://www.toshiba.com.mx/tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
Hook Sturdy strap
(as short as possible)
Hook Sturdy strap
Two stand screws
(Sample illustration)
Two stand screws
(as short as possible)
THANK YOU
(Sample illustration)
(Sample illustration)
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving an HDTV Signal
There are three basic ways to receive an HDTV signal on your new TV:
Quick Tour
32L2400U/UC/UM Series
40/50L2400U/UC/UM Series
Front
Front
1. Over-the-Air (Antenna)
2. Cable or Phone Company HDTV Service
3. Satellite
Connect a high quality outside antenna (not
supplied) directly to the antenna input on
the TV (reception cannot be guaranteed and
is based on proximity to the local signal).
Cable or phone company HDTV service customers
will need to subscribe to High-Definition service from
your local provider. (Additional monthly subscription
cost may apply).
Satellite customers will need a High-Definition
satellite receiver and appropriate dish hardware.
(Additional monthly subscription cost may apply).
Remote sensor
Remote sensor
Connecting to a High-Definition Input on your TV
Power On/Standby LED
Power On/Standby LED
You can connect directly from an antenna, or if you are using an HD cable box or HD satellite box, there are three standard connections that can be used to receive an HD signal.
Back
32L2400U/UC/UM Series
Back
40L2400U/UC/UM Series
Back
50L2400U/UC/UM Series
1. Antenna Input
2. HDMI® to HDMI®
3. DVI to HDMI®
4. Component Video Input
TM
HDMI® is the best connection
for HDTV. This is a digital
connection that carries both
digital video and digital audio.
Your HD cable box or HD satellite receiver
may have a DVI connection. This will be
connected to the HDMI® jack on the TV using an
HDMI® cable and an HDMI® to DVI converter.
DVI carries digital video only.
ColorStream HD component may also be used
To connect directly from
an antenna or basic cable:
connect the cable directly
to the antenna input on the
back of the TV.
to receive HDTV. Use if no HDMI® or DVI jack
is available. There are three jacks color-coded
with red-green-blue on the back of the TV and
HD cable box or HD satellite receiver. This
connection will require a separate analog audio
connection (use the red and white audio
connections).
Power Cord
Power Cord
INPUT
TV
INPUT
TV
OUTPUT
Cable box/Satellite box
OUTPUT
Cable box/Satellite box
INPUT
TV
INPUT
OUTPUT
TV
Cable box/Satellite box
Left side
32L2400U/UC/UM Series
Left side
40L2400U/UC/UM Series
Left side
50L2400U/UC/UM Series
Initial Setup
You must select a Language, either Home/Store mode, before you can exit out of the Setup Menu. The EXIT button will not function until these selections have
been made.
POWER button
1. Menu Language
Select a language.
2. Time Zone
Select a time zone
Press ENTER.
3. Store / Home Mode
Select Store or Home Mode.
Press ENTER.
4. ANT/CABLE in
Select Antenna or Cable.
Press ENTER.
Channel/
Volume increase/
decrease
POWER button
Initial Setup
Initial Setup
Store / Home Mode
ANT / CABLE in
Antenna
Menu Language
Time Zone
English
Eastern
Menu Language
Time Zone
English
Eastern
Switches the function
of the VOL +/- buttons
to select the volume,
channel, or input mode.
Channel/
Volume increase/
decrease
To use this TV for display in a store showroom, please select [ Store ].
[ Home ] mode is recommended for normal use.
Home
Switches the function
of the VOL +/- buttons
to select the volume,
channel, or input mode.
USB port
If you want to stop scanning,
press EXIT while scanning.
5. Start Scan
Select Start Scan.
Press ENTER.
USB port
For more information about the CH/INPUT button,
refer to the User's Guide.
Channel Program
Press EXIT for no change.
Start Scan
Most problems are easy to correct. Save time with one of these simple
solutions
Need Help?
Call Toshiba Customer Support Center
If you are experiencing a technical problem or have questions with
regards to operation, authorized service centers, warranty or
parts, Toshiba Customer Support Center is ready to help.
Consult the electronic User's Guide
L2400U series: To access the electronic User’s Guide please visit
support.toshiba.com
Navigating the menu system
Type in your product model or serial number, press GO, and then
click Manuals & Specs.
L2400U series: (800) 631-3811 From inside the United States
(949) 583-3050 From outside the United States
L2400UC series: 1-800-268-3404 From within Canada
L2400UM series: 9126-5165 and 9126-5166 For Mexico
01-800-712-67-64 lada 800 For Mexico
L2400UC series: To access the electronic User’s Guide please visit
www.toshiba.ca/support/ceg
L2400UM series: To access the electronic User's Guide please visit
aspx?ID=SPT"
Picture
You can use the buttons on the remote control to access
and navigate your TV’s onscreen menu system.
• Press MENU to open the menu system.
Picture
• When a menu is opened, use the arrow buttons (
on the remote control, to move in the corresponding
direction in the menu.
)
Picture Mode
Reset
Standard
Sound
Backlight
55
95
0
Visit Toshiba's Support Web site
Contrast
Options
ColorStream is a trademark of Toshiba America Information Systems, Inc.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
All other brand and product names are trademarks or registered trademarks of their respective
companies.
L2400U series: support.toshiba.com
Brightness
Color
• Press ENTER to save your menu settings or select a
highlighted item. (A highlighted menu item appears in a
different color in the menu).
L2400UM series: http://www.toshiba.com.mx/
tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
Installation
0
Tint
0
Sharpness
Advanced Picture Setting
Display Setting
0
Timers
Printed on recycled paper
Get Help
• All menus close automatically if you do not make a
selection within 60 seconds.
• To close a menu instantly, press EXIT.
(Sample Image)
©2013 Toshiba America Information Systems, Inc. • GMA501285010 • 12/13
Download from Www.Somanuals.com. All Manuals Search And Download.
|