Toshiba Flat Panel Television 15DLV16 User Manual

Introduction  
Connections  
2
14  
21  
23  
31  
34  
46  
53  
*
15-inch Diagonal LCD TV/DVD  
Basic setup  
COMBINATION  
TV operation  
Basic playback  
Advanced playback  
Function setup  
Others  
15DLV16  
OWNER’S MANUAL  
©2006 Toshiba Corporation  
Before operating the unit, please read this manual thoroughly.  
*Screen size is approximate.  
J5X00301A [E] (Cover)  
1
16/3/06, 3:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a soft dry cloth for cleaning the exterior cabinet only.  
6. ATTACHMENTS  
The manufacturer of this unit does not make any recommendations for attachments, as they may cause  
hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8. ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
8A. An appliance and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the appliance and cart  
combination to overturn.  
9. VENTILATION  
Slots and openings in the cabinet back or bottom are provided for ventilation,  
and to ensure reliable operation of the unit, and to protect it from overheating.  
S3125A  
These openings must not be blocked or covered. The openings should never be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat  
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have been adhered to.  
10. POWER SOURCE  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not  
sure of the type of power supply to your home, consult your appliance dealer or local power company.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).  
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug  
fully into the outlet, try reversing the plug. Do not defeat the safety purpose of the grounding-type plug.  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point  
where they exit from the appliance.  
3
J5X00301A [E] (P02-05)  
3
16/3/06, 3:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
IMPORTANT SAFEGUARDS  
(continued)  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the  
unit due to lightning and power line surges. However, if there is thunder or lightning now, do not touch the  
unit and any connected cable.  
This will for you not to receive the electric shock by the serge of thunder.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,  
as contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short  
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is  
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the  
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of  
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require-  
ments for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA LEAD IN WIRE  
GROUND CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC SERVICE  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
For example:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the  
unit to its normal operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f. When the unit exhibits a distinct change in performance, this indicates a need for service.  
4
J5X00301A [E] (P02-05)  
4
16/3/06, 3:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by  
the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
20. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
21. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
22. DISC SLOT  
Keep your fingers well clear of the disc slot as it is closing. It may cause serious personal injury.  
23. CONNECTING  
When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other  
equipment carefully and follow the instructions when making any connections.  
24. HEADPHONES  
When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-  
ously with high volume sound, it may cause hearing damage.  
25. LASER BEAM  
Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the  
laser beam. It may cause sight damage.  
26. DISC  
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
27. LCD  
Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.  
Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause  
poisoning. If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes  
have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.  
28. NOTE TO CABLE TV SYSTEM INSTALLER  
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-  
nected to the grounding system of the building, as close to the point of cable entry as practical.  
ON DISPOSAL  
This product contains mercury. Disposal of mercury may be regulated due to environmental  
considerations. For disposal or recycling information, please contact your local authorities  
5
J5X00301A [E] (P02-05)  
5
16/3/06, 3:45 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Precautions  
Notes on handling  
Notes on moisture condensation  
I Do not shock the LCD panel. It may cause unit  
damage and malfunction.  
I When shipping the unit, the original shipping carton  
and packing materials come in handy. For fully  
protection, repack the unit as it was originally packed  
at the factory.  
I Do not use volatile liquids, such as insect spray, near  
the unit. Do not leave rubber or plastic products to  
contact the unit for prolonged period. They will leave  
marks on the finish.  
Moisture condensation damages the unit. Please  
read the following carefully.  
Moisture condensation occurs, for example, when you  
pour a cold drink into a glass on a warm day. Drops of  
water form on the outside of the glass. In the same way,  
moisture may condense on the optical pick-up lens  
inside this unit, one of the most crucial internal parts of  
the unit.  
o
f
n
s
I The top and rear panels of the unit may become warm  
after a long period of use. This is not a malfunction.  
I When the unit is not in use, be sure to remove the  
disc and turn off the power.  
Optical pick-up  
lens  
I If you do not use the unit for a long period, the unit  
may not function properly in the future. Turn on and  
use the unit occasionally.  
I Moisture condensation occurs during the  
following cases.  
When you bring the unit directly from a cold place to  
a warm place.  
Notes on LCD  
The color LCD is manufactured using extremely high  
precision technology, but even so may include certain  
pixels that do not operate properly (that do not light,  
that remain lit constantly, etc.). We do our best to  
keep the number of these defective pixels to a  
minimum, but please understand that they cannot be  
completely eliminated even with the most advanced  
manufacturing technologies available today.  
The fluorescent tube which illuminates the panel from  
the inside will deteriorate with use. When the LCD  
becomes dim, flickers, or does not illuminate, contact  
your dealer for replacement.  
When you use the unit in a room where you just  
turned on the heater, or a place where the cold wind  
from the air conditioner directly hits the unit.  
In summer, when you use the unit in a hot and humid  
place just after you move the unit from an air  
conditioned room.  
When you use the unit in a humid place.  
The brightness of the LCD monitor differs slightly  
depending on the viewing angles. Adjust the angle to  
obtain the best viewing. (The recommended angle is  
90 degrees to the monitor.)  
I Do not use the unit when moisture condensation  
may occur.  
Notes on locating  
If you use the unit in such a situation, it may damage  
discs and internal parts. Remove the disc, connect the  
power cord of the unit to the wall outlet, turn on the unit,  
and leave it for two or three hours. After two or three  
hours, the unit will have warmed up and evaporated any  
moisture. Keep the unit connected to the wall outlet and  
moisture condensation will seldom occur.  
I When you place this unit near a TV, radio, or VCR, the  
playback picture may become poor and the sound  
may be distorted. In this case, place the unit away  
from the TV, radio, or VCR.  
I To avoid damage to this product, never place or store  
the unit in direct sunlight; hot, humid areas; or areas  
subject to excessive dust or vibration.  
I Always place the  
TV on the floor or  
a sturdy, level,  
stable surface  
Sturdy tie (as short as possible)  
Clip  
Wall outlet  
Hooks  
that can support  
Screw  
the weight of the  
unit. Use a sturdy  
tie between the  
TVs rear hook  
Band  
TV side  
TV top  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
Do not use any type of solvent, such as thinner and  
benzine, as they may damage the surface of the unit.  
and the rear wall, pillar, etc., to secure the TV.  
If you use a TV stand, fix the TV by using the attached  
band.  
6
J5X00301A [E] (P06-07)  
6
16/3/06, 3:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on discs  
On handling discs  
Structure of disc contents  
Do not touch the playback side of the disc.  
For example, handle the disc so that it is shown in  
figure below.  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. Video CDs and  
Audio CDs are divided into tracks.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
Video CD/Audio CD  
Video CD/Audio CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Each title, chapter or track is assigned a number, which  
is called title number, chapter numberor track  
numberrespectively.  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
There may be discs that do not have these numbers.  
Notes on copyright  
The unauthorized recording, use, distribution, or  
revision of copyrighted materials including, without  
limitation, television programs, videotapes, and DVDs, is  
prohibited under the Copyright Laws of the United  
States and other countries, and may subject you to civil  
and criminal liability.  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
7
J5X00301A [E] (P06-07)  
7
16/3/06, 3:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on discs (Continued)  
About this owner’s manual  
Playable discs  
This owners manual explains the basic instructions of  
this unit. Some DVD video discs are produced in a  
manner that allows specific or limited operation during  
playback. As such, the unit may not respond to all  
operating command. This is not a defect in the unit.  
Refer to instruction notes of discs.  
This unit can play the following discs.  
Maximum  
Disc  
Disc Mark Contents  
playback time  
Size  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
Video  
(moving  
pictures)  
Approx. 8 hours  
(double sided disc)  
The following symbol may appear on the TV screen  
during operation.  
DVD  
video  
discs  
Approx. 80 minutes  
(single sided disc)  
It means that the operation is not permitted by the TV/  
DVD or the disc.  
8 cm  
Approx. 160 minutes  
(double sided disc)  
For example, sometimes it is unable to stop the  
playback of copyright message of the disc when the  
STOP ( ) button is pressed. Alternatively, this symbol  
may also indicate that the feature is not available for the  
disc.  
Approx. 74 minutes  
(single sided disc)  
12 cm  
8 cm  
Audio  
+
Video  
(moving  
pictures)  
Video  
CDs  
DIGITAL VIDEO  
Notes on region numbers  
Approx. 20 minutes  
(single sided disc)  
The region number of this unit is 1. If region numbers,  
which stand for their playable area, are printed on your  
Approx. 74 minutes  
(single sided disc)  
ALL  
DVD video disc and you do not find  
1
or  
, disc  
12 cm  
8 cm  
playback will not be allowed by the player. (In this case,  
the unit will display a message on-screen.)  
Some DVDs that have no region code label may still be  
subject to area restrictions and therefore not playable.  
Audio  
CDs  
Audio  
Approx. 20 minutes  
(single sided disc)  
The following discs are also available.  
DVD-R/RW discs of DVD video format  
CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA,  
JPEG or DivX® format  
Kodak Picture CD and FUJICOLOR CD format  
Some of these discs may be incompatible.  
On Video CDs  
This DVD supports Video CDs equipped with the PBC  
(Version 2.0) function. (PBC is the abbreviation of  
Playback Control.) You can enjoy two playback  
variations depending on types of discs.  
You cannot play discs other than those listed above.  
You cannot play discs of DVD-RAM, DVD-ROM, Photo  
CD, etc., or non standardized discs even if they may be labeled as  
above.  
Some CD-R/RWs cannot be played back depending on the  
recording conditions.  
This unit uses the NTSC color system, and cannot play DVD video  
discs recorded in any other color system (PAL, SECAM, etc.).  
This unit can play an 8cm disc. Please do not use a disc adapter. It  
may cause trouble.  
Please do not insert any disc of an irregular shape into the unit, as  
it may interfere with the function of the unit. You may not be able to  
remove it.  
Video CD not equipped with PBC function  
(Version 1.1)  
Sound and movie can be played on this DVD in the  
same way as an audio CD.  
Video CD equipped with PBC function  
(Version 2.0)  
In addition to operation of a Video CD not equipped  
with the PBC function, you can enjoy playback of  
interactive software with search function by using the  
menu displayed on the TV screen (Menu Playback).  
Some of the functions described in this owners  
manual may not work with some discs.  
Please do not use after market accessories, such as a ring  
protector, as this may cause trouble with the operation of the unit.  
Because of problems and errors that can occur during the creation of  
DVD and CD Software and/or the manufacture of DVD and CD discs,  
Toshiba cannot assure that the DVD player contained in this TV will  
successfully play every disc bearing the DVD and CD logos. If you  
happen to experience any difficulty playing a DVD and/or CD disc on  
the DVD player contained in this TV, please contact Toshiba  
Customer Service.  
is a trademark of DVD Format/Logo Licensing Corporation.  
8
J5X00301A [E] (P08-13)  
8
16/3/06, 3:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Basic playback  
Introduction  
Playing a disc ..................................................31  
IMPORTANT SAFEGUARDS............................3  
Precautions .......................................................6  
Notes on discs...................................................7  
Contents ............................................................9  
Identification of controls ..................................10  
Advanced playback  
Zooming ......................................................... 34  
Locating desired scene .................................. 34  
Repeat playback ............................................ 35  
A-B Repeat playback ..................................... 35  
Program playback .......................................... 36  
Random playback .......................................... 36  
Changing angles ............................................ 37  
Title selection ................................................. 37  
DVD menu...................................................... 37  
Changing soundtrack language ..................... 38  
Subtitles ......................................................... 38  
Disc status...................................................... 39  
To turn off the PBC ........................................ 39  
MP3/WMA/JPEG/DivX®  
Connections  
Antenna connections.......................................14  
Cable TV connections .....................................15  
Connecting to optional equipment...................16  
Power source ..................................................20  
Basic setup  
Setting the language .......................................21  
To memorize channels ....................................22  
TV operation  
and Audio CD operation................................. 40  
Repeat and program playback  
using file browser ........................................... 44  
TV operation....................................................23  
Closed captions...............................................25  
Setting the V-Chip ...........................................26  
Picture control adjustment...............................28  
Adjusting the picture mode..............................28  
Selecting the color temperature ......................29  
Sound control adjustment ...............................30  
Stereo and Second Audio Program (SAP) ......30  
Function setup  
Customizing the function settings .................. 46  
Temporary cancel the rating level  
by DVD disc ................................................... 52  
Others  
Language code list ......................................... 53  
Troubleshooting ............................................. 54  
Reception disturbances.................................. 56  
Specifications ................................................. 57  
Limited United States Warranty ..................... 58  
9
J5X00301A [E] (P08-13)  
9
16/3/06, 3:46 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of controls  
See the page in  
for details.  
Top  
EJECT ( ) button  
32  
POWER button 31  
SKIP (  
/
) buttons 33  
VOLUME ( ) buttons 23  
STOP( ) button  
31  
CHANNEL (4/3) buttons  
22  
PLAY ( ) button 31  
Front  
Speaker  
Speaker  
Remote sensor  
POWER indicator  
10  
J5X00301A [E] (P08-13)  
10  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Side  
Adjusting the angle of the base  
Approx. 15°  
Approx. 5°  
Left Side  
Right Side  
You can adjust  
the angle of the  
TV-screen for 5°  
forward or for 15°  
backward from  
vertical angle.  
Hold the base of  
the TV while  
Disc  
slot  
PHONES jack  
AUDIO IN (L/R)  
/VIDEO IN  
(LINE 2 IN) jacks  
S-VIDEO jack  
adjusting the  
angle.  
Rear  
COAXIAL DIGITAL AUDIO OUT jack  
Antenna jack  
VIDEO IN (LINE 1 IN) jack  
DC input jack  
COMPONENT VIDEO IN  
(Y, PB, PR) (LINE 1 IN) jacks  
AUDIO IN (L/R) (LINE 1 IN) jacks  
11  
J5X00301A [E] (P08-13)  
11  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of controls (Continued)  
Remote control  
The instructions in this manual describe the function on the remote control. See the page in  
for details.  
EJECT button 32  
POWER button 21  
TV/DVD button 31  
SLEEP button 24  
Direct channel selection  
buttons (0-9)  
23  
26  
Numbered buttons (0-9)  
CH RTN button 24  
ZOOM button 34  
RECALL button 24  
JUMP button 34  
INPUT SELECT button 16  
PLAY MODE button 35  
GAME button 16  
MUTE button 24  
VOL +/buttons 23  
CANCEL button 21 34  
TOP MENU button 37 42  
*DVD MENU button 37 42  
Direction buttons  
21  
/ / )  
(
/
CH +/buttons  
22  
MENU button 21  
SETUP button 46  
ENTER button 21  
RETURN button 46  
PLAY button 31  
STOP button 31  
SKIP buttons 33  
PAUSE button 32  
REV button 33  
FWD button 33  
CLOSED CAPTION button  
25  
SLOW buttons 33  
REPEAT A-B button  
35  
ANGLE button 37  
AUDIO button 38  
SUBTITLE button 38  
*DVD MENU button  
Use the DVD MENU button to  
display the menu included on  
many DVD video discs.  
To operate a menu, follow the  
instructions in DVD menu.37  
12  
J5X00301A [E] (P08-13)  
12  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting batteries  
Open the battery compartment  
cover in the direction of the  
arrow.  
Install two R03/AAAbatteries  
(supplied), paying attention to  
the polarity indicated in the  
battery compartment.  
Replace the compartment  
cover.  
1
2
3
Operation  
Aim the remote control at the remote sensor and press control buttons to operate.  
Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5  
meters.  
Approx. 5 meters  
Caution:  
Never throw batteries into a fire.  
Notes:  
Be sure to use AAA size batteries.  
Dispose of batteries in a designated disposal area.  
Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with  
applicable laws and regulations.  
If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with  
new ones.  
When necessary to replace batteries in the remote control, always replace both batteries with new ones.  
Never mix battery types or use new and used batteries in combination.  
Always remove batteries from remote control if they are dead or if the remote control is not to be used for an  
extended period of time. This will prevent battery acid from leaking into the battery compartment.  
13  
J5X00301A [E] (P08-13)  
13  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Antenna connections  
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.  
If you are using a cable TV service (CABLE), see page 15 for Cable TV connections.  
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)  
Connect the 75 ohm cable from the combination  
VHF/UHF antenna to the antenna jack on the back  
of the TV/DVD.  
Antenna  
jack  
Antenna  
jack  
If your combination VHF/UHF antenna has a 300  
ohm twin-lead wire, use the 300-75 ohm matching  
transformer.  
75 ohm coaxial cable  
(not supplied)  
300-75 ohm matching  
transformer (supplied)  
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)  
Connect the UHF 300 ohm twin-lead wire to the  
Antenna  
300-75 ohm matching  
transformer (supplied)  
combiner (not supplied). Connect the VHF 300  
ohm twin-lead wire to the 300-75 ohm matching  
transformer.Attachthetransformertothecombiner,  
then attach the combiner to the antenna jack on the  
back of the TV/DVD.  
jack  
Combiner  
(not supplied)  
UHF 300 ohm  
twin-lead wire  
(not supplied)  
VHF 300 ohm  
twin-lead wire  
(not supplied)  
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
twin-lead wire to the combiner (not supplied).  
Attach the combiner to the antenna jack on the back  
Antenna  
jack  
of the TV/DVD.  
VHF 75 ohm  
(not supplied)  
Combiner  
(not supplied)  
UHF 300 ohm  
twin-lead wire  
(not supplied)  
14  
J5X00301A [E] (P14-25)  
14  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable TV connections  
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box.  
Some cable companies offer premium pay channelsin which the signal is scrambled. Descrambling these signals for  
normal viewing requires the use of a descrambler device which is generally provided by the cable company.  
For subscribers to basic cable TV service  
Antenna  
jack  
For basic cable service not requiring a converter/descrambler  
box, connect the Cable TV 75 ohm coaxial cable directly to the  
Antenna jack on the back of the TV/DVD.  
75 ohm  
coaxial cable  
For subscribers to scrambled cable TV service  
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the  
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect  
the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections  
shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)  
and use the converter/descrambler box to select channels.  
Incoming  
75 ohm  
Cable TV  
Antenna  
jack  
75 ohm cable to  
TV/DVD  
Converter/  
descrambler  
For subscribers to unscrambled basic cable TV service with scrambled  
premium channels  
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the  
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the  
cable company or an electronics supply store). Follow the connections shown below. With the switch in the B”  
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the Aposition, tune  
your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/  
descrambler box to tune scrambled channels.  
Converter/  
descrambler  
Incoming  
75 ohm  
Antenna  
jack  
75 ohm cable  
to TV/DVD  
Cable TV  
A
Splitter  
A/B switch  
B
15  
J5X00301A [E] (P14-25)  
15  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
INPUT SELECT  
GAME  
Connecting to optional equipment  
You can enjoy VCR, camcorder or TV game with connection to external input.  
Using the audio/video inputs  
Press INPUT SELECT repeatedly to select the desired mode.  
VIDEO1, VIDEO2, ColorStreamor TV channel will display on the screen for 4 seconds.  
TV Channel  
VIDEO1  
VIDEO2  
(Rear lower left) (Left side)  
ColorStream  
VIDEO1  
Note: This key will not operate in DVD mode.  
Connecting to a VCR  
To playback from the VCR, connect the VCR to the TV/DVD as shown.  
Select the VIDEO2by pressing INPUT SELECT repeatedly.  
Left side (LINE 2 IN)  
(red)  
: Signal flow  
The LINE 1 IN  
VCR  
(white)  
terminals can be used  
in the same way.  
(yellow)  
To Audio/Video OUT  
Audio/Video cable (not supplied)  
To AUDIO(L/R)/VIDEO IN  
Note: Picture might be muted for some VCR playback. This is not a malfunction of this unit.  
Connecting to a camcorder  
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.  
Select the VIDEO2by pressing INPUT SELECT repeatedly.  
Left side (LINE 2 IN)  
: Signal flow  
(red)  
(white)  
(yellow)  
Camcorder  
The LINE 1 IN  
terminals can be used  
in the same way.  
To Audio/Video OUT  
Audio/Video cable (not supplied)  
To AUDIO(L/R)/VIDEO IN  
Connecting to a TV Game  
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.  
1. Connect a TV Game to the TV/DVD.  
2. Select the GAMEby pressing GAME.  
The GAME mode screen appears.  
This TV/DVD has the GAME mode function (see page 24).  
Left side (LINE 2 IN)  
(red)  
: Signal flow  
(white)  
(yellow)  
Only the LINE 2 IN  
terminals can be  
used with the  
To Audio/Video OUT  
GAME mode.  
Audio/Video cable (not supplied)  
Notes:  
You can also change the TV screen to the desired mode by pressing the CH +/buttons.  
To AUDIO(L/R)/VIDEO IN  
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal  
generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection  
diagrams. You'll need to consult each component's Owner's Manual for additional information.  
Interactive video games that involve shooting a guntype of joystick at on-screen target may not work on this TV/DVD.  
16  
J5X00301A [E] (P14-25)  
16  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an optional equipment with S-video output  
If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must  
also connect the audio cables to the AUDIO IN (LINE 2 IN) jacks on the left side of the TV/DVD. The S-VIDEO  
cable only carries the video signal. The audio signal is separate.  
Left side (LINE 2 IN)  
Select the VIDEO2by pressing INPUT SELECT repeatedly.  
(red)  
(white)  
: Signal flow  
Ex. VCR with S-Video  
To AUDIO (L/R) IN  
(playback)  
To Audio (L/R) OUT  
To S-VIDEO OUT  
To S-VIDEO IN  
Audio cable (not supplied)  
S-Video cable (not supplied)  
Note: When the S-VIDEO cable and the standard video cable are connected at the same time, the S-video cable takes precedence.  
Connecting an optional equipment with ColorStream® (Component video) output  
Your TV/DVD is capable of using ColorStream® (component video). Connecting your TV/DVD to a component  
video compatible DVD player, such as a Toshiba DVD player with ColorStream® can greatly enhance picture  
quality and performance.  
Rear lower right of the TV  
Ex. DVD player with Component video  
: Signal flow  
To AUDIO (L/R) IN  
To COMPONENT  
(Y, PB, PR) IN  
To Component  
To Audio OUT  
Video OUT  
Audio cable (not supplied)  
Component video cable (not supplied)  
I Selecting Component input mode  
Press INPUT SELECT repeatedly to  
select ColorStreammode.  
When using the Component video cable,  
an Audio cable must be connected to  
AUDIO IN (L/R) (LINE 1 IN) jacks.  
ColorStream  
The ColorStream® inputs on this unit are for use with devices that output 480i interlaced signals and 480p progressive signals.  
This unit will not accept or display 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-  
definition set-top receiver, 720p progressive scan DVD player, or other similar device to the units ColorStream® inputs, YOU MUST  
SWITCH THE DEVICES OUTPUT TO 480i INTERLACED OR 480p PROGRESSIVE MODE FIRST. Failure to do this will cause a  
poor or no picture to display.  
Notes:  
Refer to the owners manual of the connected equipment as well.  
When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet  
before making any connections.  
If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the  
tuner and radio.  
17  
J5X00301A [E] (P14-25)  
17  
16/3/06, 3:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to optional equipment (Continued)  
This section uses the following reference mark.  
You can enjoy high quality dynamic sounds by connecting the  
TV/DVD to optional audio equipment.  
*
: Front speaker  
: Rear speaker  
: Sub woofer  
: Center speaker  
: Signal flow  
Connecting to an amplifier equipped with a Dolby® Digital decoder  
Dolby Digital  
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to  
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the  
Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier  
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will  
obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as  
well as from titles with the Dolby Surround mark.  
Rear lower left of the TV  
Amplifier equipped with a  
Dolby Digital decoder  
To COAXIAL  
type digital  
audio input  
To COAXIAL DIGITAL  
AUDIO OUT  
Manufactured under license  
from Dolby Laboratories.  
Dolby, Pro Logic, and the dou-  
ble-D symbol are trademarks  
of Dolby Laboratories.  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with a Dolby Surround Pro Logic  
Dolby Surround Pro Logic  
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right  
and left front speakers, a center speaker, and one or two rear speakers).  
I With an amplifier equipped with a Dolby Digital  
Connect the equipment the same way as described in Connecting to an amplifier equipped with a Dolby Digital decoder.”  
Refer to that amplifiers owners manual and set the amplifier so that you can enjoy Dolby Surround Pro Logic sound.  
I With an amplifier not equipped with a Dolby Digital  
Connect the equipment as follows.  
This connection is only suitable for Video CDs and Audio CDs.  
Rear lower left of the TV  
*
Amplifier equipped with a  
Dolby Surround Pro Logic  
To COAXIAL  
type digital  
audio input  
To COAXIAL DIGITAL  
AUDIO OUT  
Connect one or two rear speak-  
*
ers. The output sound from the  
rear speakers will be monaural  
even if you connect two rear  
speakers.  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with a DTS decoder  
Digital Theater Systems (DTS)  
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.  
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD  
video discs or audio CDs.  
Rear lower left of the TV  
Amplifier equipped with  
a DTS decoder  
To COAXIAL  
To COAXIAL DIGITAL  
type digital  
audio input  
AUDIO OUT  
DTSand DTS Digital Out”  
are trademarks of Digital  
Theater Systems, Inc.  
75 coaxial cable (not supplied)  
18  
J5X00301A [E] (P14-25)  
18  
16/3/06, 3:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an amplifier equipped with an MPEG audio decoder  
MPEG2 sound  
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic  
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.  
Rear lower left of the TV  
Amplifier equipped with an  
MPEG2 audio decoder  
To COAXIAL  
To COAXIAL DIGITAL  
type digital  
AUDIO OUT  
audio input  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with a digital audio input  
2 channel digital stereo  
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input  
and speaker system (right and left front speakers).  
Note: PCM audio is limited to DVD or CD playback.  
Rear lower left of the TV  
Amplifier equipped with a  
Digital audio input  
To COAXIAL  
type digital  
audio input  
To COAXIAL DIGITAL  
AUDIO OUT  
75 coaxial cable (not supplied)  
Notes:  
DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.  
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO  
OUT jack of the TV/DVD.  
Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the COAXIALinput of a Receiver or Processor.  
Refer to the owners manual of the connected equipment as well.  
When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the  
wall outlet before making any connections.  
The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receivers volume to a moderate  
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the TV/DVDs power cord. If you leave the amplifiers power on,  
the speakers may be damaged.  
19  
J5X00301A [E] (P14-25)  
19  
16/3/06, 3:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Power source  
Power connection  
AC 120V,  
60Hz  
To DC input jack  
2
3
1
AC adapter  
(supplied)  
AC cord  
(supplied)  
TO USE AC POWER  
1. Connect the AC cord to the AC adapter.  
2. Connect the AC adapter plug into the TV/DVDs DC input jack.  
3. Connect the AC cord into a wall outlet.  
Notes:  
Make sure to insert the plug of each cord securely.  
During use the AC adapter becomes warm. This is not a malfunction.  
WARNING:  
DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC ADAPTER OR  
POWER CORD. THIS COULD CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.  
DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD CAUSE FIRE,  
ELECTRIC SHOCK, OR DAMAGE.  
CAUTION:  
DO NOT USE THE AC ADAPTER IF IT IS COVERED BY A CLOTH ETC., OR PRESSED INTO A NARROW AREA.  
THIS RESULTS IN POOR DISSIPATION OF HEAT AND MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.  
WHEN THIS UNIT IS NOT USED FOR AN EXTENDED PERIOD OF TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF  
SAFETY, BE SURE TO UNPLUG IT FROM THE WALL OUTLET.  
DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRIC SHOCK.  
IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED AC ADAPTER AND AC  
CORD MUST BE USED. CONTACT THE DEALER THAT YOU PURCHASED THE UNIT FROM.  
20  
J5X00301A [E] (P14-25)  
20  
16/3/06, 3:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic setup  
POWER  
Setting the language  
This TV/DVD can display the on screen language in English, Spanish or French  
in the TV mode.  
Select the language you prefer first, then proceed with the other menu  
options.  
CANCEL  
ENTER  
/
/
/
MENU  
Setting the language  
To turn on the TV/DVD, press POWER.  
The Power indicator on the front of the main unit  
will light.  
1
Press MENU and then press  
or  
to select  
SETUP.  
2
3
PICTURE  
AUDIO  
SETUP  
V-CHIP  
SETUP  
LANGUAGE  
TV/CABLE  
ENGLISH  
CABLE  
CH PROGRAM  
ADD/ERASE  
ADD  
OFF  
CLOSED CAPTION  
:SELECT  
:ADJUST  
Press  
or  
to select LANGUAGE, then  
press or to select the desired language:  
English (ENGLISH), Spanish (ESPAÑOL) or  
French (FRANÇAIS), then press ENTER.  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
SETUP  
LANGUAGE  
ENGLISH  
ENGLISH/FRANÇAIS/ESPAÑOL  
TV/CABLE  
CABLE  
CH PROGRAM  
ADD/ERASE  
ADD  
OFF  
CLOSED CAPTION  
:SELECT  
:ADJUST  
Press CANCEL to clear the menu screen.  
4
CANCEL  
Notes:  
If the unit does not operate properly, or No key operation  
(by the unit and/or the remote control): Static electricity,  
etc., may affect the TV/DVDs operation. In such case,  
disconnect the AC cord once, then connect it again.  
The TV section has its own menu and also DVD section has  
its own menu  
.
46  
21  
J5X00301A [E] (P14-25)  
21  
16/3/06, 3:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic setup  
To memorize channels  
09  
This TV/DVD is equipped with a channel memory feature which allows  
channels to skip up or down to the next channel set into memory, skipping over  
unwanted channels. Before selecting channels, they must be programmed into  
the TV/DVDs memory. In addition to normal VHF and UHF channels, this TV/  
DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an  
antenna, set the TV/CABLE selection to the TV position. When shipped from  
the factory, this selection is in the CABLE position.  
CANCEL  
/
/
/
CH +/–  
MENU  
TV/CABLE selection  
Automatic memory tuning  
Press MENU in the TV mode, then press or  
to select SETUP.  
PressMENU,thenpress or toselectSETUP. Press  
or to select the CH PROGRAM, then press  
.
1
The TV will begin memorizing all the channels  
available in your area.  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
SETUP  
LANGUAGE  
TV/CABLE  
ENGLISH  
CABLE  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
CH PROGRAM  
ADD/ERASE  
SETUP  
ADD  
OFF  
CLOSED CAPTION  
LANGUAGE  
TV/CABLE  
ENGLISH  
CABLE  
CH PROGRAM  
ADD/ERASE  
:SELECT  
:ADJUST  
ADD  
OFF  
CLOSED CAPTION  
:SELECT  
:ADJUST  
Press  
or  
to select TV/CABLE.  
2
3
PICTURE  
AUDIO  
SETUP  
V-CHIP  
SETUP  
To ADD/ERASE channels  
LANGUAGE  
TV/CABLE  
ENGLISH  
TV/CABLE  
CH PROGRAM  
ADD/ERASE  
ADD  
OFF  
CLOSED CAPTION  
Select the desired channel to be added or deleted  
using Direct channel selection (09) or CH +/.  
:SELECT  
:ADJUST  
1
Press or to select TVor CABLE.  
TV - VHF/UHF channels  
CABLE - Cable TV channels  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
SETUP  
Press MENU, then press or to select  
LANGUAGE  
TV/CABLE  
ENGLISH  
TV/CABLE  
SETUP. Press  
or  
to select ADD/ERASE.  
2
CH PROGRAM  
ADD/ERASE  
ADD  
OFF  
CLOSED CAPTION  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
:SELECT  
:ADJUST  
SETUP  
LANGUAGE  
ENGLISH  
CABLE  
TV/CABLE  
CH PROGRAM  
ADD/ERASE  
ADD/ERASE  
OFF  
Press CANCEL to clear the menu screen.  
CLOSED CAPTION  
4
CANCEL  
:SELECT  
:ADJUST  
Press or to select ADDor ERASE.  
Cable TV chart  
The chart below is typical of many cable system channel  
allocations.  
3
4
Press CANCEL to clear the menu screen.  
Repeat steps 1 ~ 3 to add or erase other channel.  
CANCEL  
22  
J5X00301A [E] (P14-25)  
22  
16/3/06, 3:48 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
POWER  
TV operation  
09  
VOL +/–  
TV operation  
To turn on the TV/DVD, press POWER.  
The Power indicator on the front of the main unit  
will light.  
Press direct channel selection (09) to select  
the channel.  
4
1
2
TV mode direct channel selection  
When the TV/CABLE selection is in the TV  
position, all channels can be instantly selected by  
using two buttons. (for example, to select channel  
2, press 0, then 2.  
If you press only 2,  
channel selection will  
be delayed for a few  
seconds.) For  
channels 10 and  
above, press the 2  
digits in order.  
Adjust the volume level by pressing VOL + or .  
The volume level will be indicated on the  
screen by white bars. As the volume level  
increases, so do the number of bars. If the  
volume decreases, the number of white bars  
also decreases.  
ANT  
02  
CABLE mode direct channel selection  
When the TV/CABLE selection is in the CABLE  
position, channels can be selected as follows:  
TO SELECT CABLE TV CHANNELS:  
1-9:  
Press 0twice, then 1-9 as needed.  
Example, to select channel 2, press  
002.  
Press 0, then the remaining 2 digits.  
Example, to select channel 12, press  
012.  
10-12:  
VOLUME  
32  
13-99:  
Press the 2 digits in order. Example, to  
select channel 36, press 36.  
Set the TV/CABLE selection to the appropriate  
position.  
100-125: Press the 3 digits in order. Example, to  
select channel 120, press 120.  
NOTE FOR CHANNELS 1-12:  
22  
3
If only 1 or 2 buttons are pressed, the corresponding  
channel will be selected in 2 seconds.  
TV  
- VHF/UHF channels  
CABLE - Cable TV channels  
CATV  
VHF  
2-13  
TV  
VHF  
2-13  
UHF  
14-69  
Auto power off  
If a station being viewed stops broadcasting, the TV will  
automatically shut itself off after 15 minutes.  
STD/HRC/IRC  
14-36  
(A) (W)  
37-59  
(AA) (WW)  
60-85  
(AAA) (ZZZ)  
86-94  
(86) (94)  
95-99  
(A-5) (A-1)  
100-125  
(100) (125)  
01  
(5A)  
Note:  
If a channel with no broadcast is selected, the sound will  
automatically be muted.  
23  
J5X00301A [E] (P14-25)  
23  
16/3/06, 3:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
SLEEP  
TV operation (Continued)  
RECALL  
CH RTN  
MUTE  
VOL +/–  
GAME  
CH +/–  
TV operation  
I SLEEP  
I CHANNEL UP/DOWN  
To set the TV/DVD to turn off after a preset amount of  
time, press SLEEP on the remote control. The clock  
will count up 10 minutes for each press of SLEEP  
(0h00m, 0h10m,... 1h50m, 2h00m). After the sleep  
time is programmed, the display will appear briefly  
every ten minutes to remind you that the sleep timer is  
operating. To confirm the sleep timer setting, press  
SLEEP and the remaining time will be displayed for a  
few seconds. To cancel the sleep timer, press SLEEP  
repeatedly until the display turns to 0h00m.  
Press and release CH + or . The channel  
automatically stops at the next channel set into  
memory.  
For proper operation, before selecting channels, they  
should be set into the memory. See page 22 To  
memorize channels.  
ANT  
12  
SLEEP  
0h00m  
I RECALL  
Press RECALL to display the current informations on the  
screen. Press RECALL again to clear the display.  
Channel number or external input mode  
Stereo or SAP (Second Audio Program) audio status  
I GAME MODE  
After connecting a TV Game to the unit (see page 16),  
press GAME. The TV screen changes to the Game  
mode.  
STEREO  
SAP  
GAME  
The Game mode screen is adjusted to the suitable  
brightness for your eyes.  
If GAME is pressed during standby mode, the unit  
turns on automatically and the Game mode screen  
appears on the screen.  
ANT  
TV  
12  
I CH RETURN  
Interactive video games that involve shooting a gun”  
type of joy-stick at an on-screen target may not work  
on this TV/DVD.  
This button allows you to go back to the last channel  
selected by pressing CH RTN. Press CH RTN again to  
return to the last channel you were watching.  
I HEADPHONES  
Insert a stereo headphones (not supplied) with a 1/8”  
mini plug into the PHONES jack on the front panel.  
If you connect headphones, the sound from TV  
speakers is muted.  
ANT  
7
I MUTE  
Press MUTE to switch off the sound. The TV/DVDs  
sound will be silenced and MUTEwill appear briefly on  
the screen. The sound can be switched back on by  
pressing this button again or one of VOL +/.  
MUTE  
24  
J5X00301A [E] (P14-25)  
24  
16/3/06, 3:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed captions  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display closed captioned  
television programs. Closed captioning will display text on the screen for  
hearing impaired viewers or it will translate and display text in another  
language.  
CLOSED  
CAPTION  
Closed captions  
Captions: This closed caption mode will display text on the screen in English or another language (depending  
on the setting of the closed captions CH 1/2).  
Generally, closed captions in English are transmitted on captions channel 1 and closed captions in other lan-  
guages are transmitted on captions channel 2.  
Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.  
After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.  
If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the  
signal is received again. If the channels are changed, the captions will be delayed approximately 10 seconds.  
The captions will appear in places on the screen where they will least interfere with the picture, usually on the  
bottom of the screen. News programs will usually show three-line closed captions which scroll onto the screen.  
Most other shows provide two or three lined captions placed near the character who is speaking so the viewer  
can follow the dialogue. Words in italics or underlined describe titles, words in foreign languages or words  
requiring emphasis. Words that are sung usually appear enclosed by musical notes.  
For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol  
(CC).  
TO VIEW CLOSED CAPTIONS  
Press CLOSED CAPTION to switch between normal TV and the two closed  
caption modes (captions and full screen text). Closed captioning will display text  
on the screen for hearing impaired viewers.  
You can also select the closed captions in SETUP menu in the TV mode.  
CLOSED CAPTION OFF  
Notes:  
When selecting closed captions, the captioning will be delayed approximately 10 seconds.  
If no caption signal is received, no captions will appear, but the television will remain in the caption mode.  
Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning,  
especially with live programs.This is because during live programs, captions are also entered live.These transmissions do not  
allow time for editing.  
When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with closed  
captions.  
Some cable systems and copy protection systems may interfere with the closed captioned signal.  
If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with  
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.  
25  
J5X00301A [E] (P14-25)  
25  
16/3/06, 3:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
Setting the V-Chip  
09  
An age limitation can be set to forbid children to see and hear violent scenes or  
pictures for adults, etc. The TV/DVD corresponds to TV RATINGand MOVIE  
RATING. To use the V-Chip function, you must register a password.  
CANCEL  
ENTER  
Notes:  
If you forget the password, you cannot set the V-Chip.  
To avoid forgetting the password, write it down and keep in  
the safe place.  
/
/
/
MENU  
To register password  
To change password  
Repeat steps 1 ~ 3 in To register password”  
Press MENU and then press  
V-CHIP.  
or  
to select  
on left, then press  
PASSWORD, then press  
or  
to select NEW  
.
1
2
3
1
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
V-CHIP  
TV RATING  
OFF  
OFF  
V-CHIP  
TV RATING  
OFF  
OFF  
MOVIE RATING  
OFF  
MOVIE RATING  
OFF  
NEW PASSWORD  
NEW PASSWORD  
:SELECT  
:ADJUST  
:SELECT  
:ADJUST  
Press  
or . New password entering screen  
appears.  
Enter the new password using Number buttons  
(09), then press ENTER.  
2
3
PICTURE  
V-CHIP  
AUDIO  
SETUP  
----  
V-CHIP  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
----  
V-CHIP  
NEW PASSWORD  
NEW PASSWORD  
[0-9]:SELECT  
ENTER:SET  
CANCEL:END  
[0-9]:SELECT  
ENTER:SET  
CANCEL:END  
Enter the password (4 digits) using Number  
buttons (09), then press ENTER.  
Enter the same password again using Number  
buttons (09) for safety, then press ENTER.  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
NEW PASSWORD  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
CONFIRM PASSWORD  
[0-9]:SELECT  
ENTER:SET  
CANCEL:END  
[0-9]:SELECT  
ENTER:SET  
CANCEL:END  
appears instead of the number.  
Press CANCEL to clear the menu screen.  
Enter the same password again for the safety,  
then press ENTER.  
Now the password was registered and V-Chip  
setting menu will appear on the display.  
4
4
CANCEL  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
CONFIRM PASSWORD  
Note:  
TheV-Chip feature is available only for the U.S.V-Chip system.  
The Canadian V-Chip system is not supported.  
[0-9]:SELECT  
ENTER:SET  
CANCEL:END  
26  
J5X00301A [E] (P26-30)  
26  
16/3/06, 3:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECALL  
CANCEL  
ENTER  
/
/
/
To set the V-Chip  
Repeat steps 1 ~ 3 in To register password”  
Press  
or  
to select the desired rating.  
on page 26, then press  
or  
to select  
4
1
TV RATING.  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
V-CHIP  
TV RATING  
OFF  
TV-Y  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
MOVIE RATING  
PG-13  
OFF/G/PG/PG-13/R/NC-17/X  
V-CHIP  
OFF  
OFF  
NEW PASSWORD  
TV RATING  
OFF/TV-Y/TV-Y7/TV-G  
TV-PG/TV-14/TV-MA  
:SELECT  
:ADJUST  
MOVIE RATING  
OFF  
NEW PASSWORD  
:SELECT  
:ADJUST  
OFF : MOVIE RATING is not set  
G
: All ages  
PG  
: Parental guidance  
PG-13 : Parental guidance  
Press  
or  
to select the desired rating.  
less than 13 years old  
2
R
: Under 17 years old  
OFF : TV RATING is not set  
TV-Y : All children  
Parental guidance suggested  
NC-17 : 17 years old and above  
X
TV-Y7 : 7 years old and above  
TV-G : General audience  
TV-PG : Parental guidance  
TV-14 : 14 years old and above  
TV-MA: 17 years old and above  
: Adult only  
Press  
or to select V-CHIP.  
5
6
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
When you select TV-  
V-CHIP  
TV RATING  
ON/OFF  
TV-Y  
Y7, TV-PG, TV-14 or  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
MOVIE RATING  
PG-13  
TV-MA, press  
V-CHIP  
NEW PASSWORD  
V-CHIP  
RECALL to show the  
TV RATING  
OFF  
TV-Y  
:SELECT  
:ADJUST  
OFF/TV-Y/TV-Y7/TV-G  
TV-PG/TV-14/TV-MA  
contained rating.  
MOVIE RATING  
OFF  
NEW PASSWORD  
Press  
/
or  
/
to select the desired  
item you want.  
:SELECT  
:ADJUST  
Press  
or  
to display ON.  
Now your settings were set into the memory.  
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
V-CHIP  
TV RATING  
ON/OFF  
TV-Y  
MOVIE RATING  
PG-13  
NEW PASSWORD  
:SELECT  
:ADJUST  
Press  
or  
to select MOVIE RATING.  
Press CANCEL to clear the menu screen.  
3
CANCEL  
7
PICTURE  
V-CHIP  
AUDIO  
SETUP  
V-CHIP  
V-CHIP  
TV RATING  
OFF  
TV-Y  
To use after the TV is protected  
MOVIE RATING  
OFF  
OFF/G/PG/PG-13/R/NC-17/X  
When you try to view a program with a ratings block, a message  
will appear listing the programs ratings.The program can still be  
viewed if you press MUTE and then enter your password to  
temporarily bypass the block.  
NEW PASSWORD  
:SELECT  
:ADJUST  
Note:  
The V-Chip function is activated only on programs that have  
the rating signal.  
27  
J5X00301A [E] (P26-30)  
27  
16/3/06, 3:50 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
Picture control adjustment/  
Adjusting the picture mode  
Picture controls are factory preset but you can adjust them individually as follows:  
And also you can select four picture modesStandard, Sports, Movie, and  
Memoryas described in the following table:  
CANCEL  
/
/
/
MENU  
Picture control adjustment  
Adjusting the picture mode  
Press MENU and then press  
or  
to select  
Press MENU and then press  
or  
to select  
PICTURE.  
PICTURE.  
1
1
2
PICTURE  
AUDIO  
SETUP  
V-CHIP  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
PICTURE  
MODE  
SPORTS  
PICTURE  
MODE  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
25  
50  
25  
00  
25  
SPORTS  
BRIGHTNESS  
25  
50  
25  
00  
25  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
:SELECT  
:ADJUST  
:SELECT  
:ADJUST  
Press  
or  
to select the item you want to  
Press  
or  
or  
to select MODE, then press  
adjust, then press  
or  
to adjust the setting.  
to select the desired picture mode.  
2
PICTURE  
AUDIO  
SETUP  
V-CHIP  
PICTURE  
MODE  
SPORTS  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
25  
50  
25  
00  
25  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
PICTURE  
MODE  
SPORTS  
SPORTS/STANDARD/MOVIE/MEMORY  
:SELECT  
:ADJUST  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
25  
50  
25  
00  
25  
:SELECT  
:ADJUST  
Selection  
Pressing  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
darker  
lower  
paler  
reddish  
softer  
lighter  
higher  
deeper  
greenish  
sharper  
Mode  
Picture quality  
SPORTS  
Bright and dynamic picture (factory-set)  
STANDARD Standard picture quality (factory-set)  
MOVIE  
MEMORY  
Movie-like picture setting (factory-set)  
Your personal preferences (set by you;  
see Picture control adjustmentas left)  
Note:  
The CONTRAST default setting is set to  
maximum (+50) at the factory.  
Press CANCEL to clear the menu screen.  
Press CANCEL to clear the menu screen.  
3
3
CANCEL  
CANCEL  
I To return all adjustments to the factory preset levels  
Note:  
You cannot select MODEin the Game mode.  
Press  
or  
to select RESET, then press  
.
28  
J5X00301A [E] (P26-30)  
28  
16/3/06, 3:50 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the color temperature  
CANCEL  
/
/
/
MENU  
Selecting the color temperature  
Press MENU and then press  
or  
to select  
PICTURE”  
1
PICTURE  
AUDIO  
SETUP  
V-CHIP  
PICTURE  
MODE  
SPORTS  
BRIGHTNESS  
CONTRAST  
COLOR  
25  
50  
25  
0
TINT  
SHARPNESS  
25  
:SELECT  
:ADJUST  
Press or to selectCOLORTEMPERATURE.  
2
3
PICTURE  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
COLOR  
TEMPERATURE  
COOL  
COOL/MEDIUM/WARM  
RESET  
:SELECT  
:ADJUST  
Press  
mode.  
or  
to select the desired color  
PICTURE  
PICTURE  
AUDIO  
SETUP  
V-CHIP  
COLOR  
TEMPERATURE  
WARM  
COOL/MEDIUM/WARM  
RESET  
:SELECT  
:ADJUST  
Mode  
Picture quality  
COOL  
MEDIUM  
WARM  
Bluish  
Neutral  
Reddish  
Press CANCEL to clear the menu screen.  
4
CANCEL  
Note:  
You cannot select COLOR TEMPERATUREin the  
Game mode.  
29  
J5X00301A [E] (P26-30)  
29  
16/3/06, 3:51 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
Sound control adjustment/  
CANCEL  
Stereo and Second Audio Program (SAP)  
/
/
/
Sound controls are factory preset but you can adjust them individually as follows:  
The TV/DVD is equipped with a feature known as multi-channel TV sound or  
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs  
with high fidelity stereo sound.  
MENU  
MTS also provides an extra channel called the Second Audio Program or SAP  
which broadcasters can use to transmit a second language for bilingual  
transmission or for other purposes.  
Sound control adjustment  
Listening to stereo sound  
Repeat step 1 in Sound control adjustmenton  
Press MENU and then press  
or  
to select  
left, then press  
Then press or  
or  
to select MTS.  
AUDIO”  
1
2
PICTURE  
AUDIO  
SETUP  
V-CHIP  
to select STR.  
AUDIO  
When the TV is turned on or a channel selection is  
made, the STEREOwill appear on the screen.  
This means that Stereo broadcasting is available.  
You can enjoy stereo sound from the left and right  
speakers.  
MTS  
STEREO  
25  
BASS  
TREBLE  
BALANCE  
SURROUND  
RESET  
25  
00  
OFF  
:SELECT  
:ADJUST  
When mono broadcasting is received, no indication is  
displayed.  
If the broadcast signal is not strong enough or clear  
stereo sound is not available, select MONO.  
The noise may be eliminated.  
Press  
adjust, then press  
or  
to select the item you want to  
or to adjust the setting.  
PICTURE  
AUDIO  
AUDIO  
SETUP  
V-CHIP  
MTS  
BASS  
TREBLE  
BALANCE  
SURROUND  
RESET  
STEREO  
25  
25  
00  
OFF  
STEREO  
:SELECT  
:ADJUST  
MTS  
Press  
or  
or  
to select STR(STEREO), SAPor  
MONO.  
BASS:  
Press  
to adjust the bass sound.  
Listening to SAP (Second Audio Program)  
TREBLE:  
Press  
or  
to adjust the treble sound.  
BALANCE:  
Repeat step 1 in Sound control adjustmenton  
Press  
or  
to obtain an equal sound level from  
left, then press  
Then press or  
or  
to select MTS.  
both speakers.  
SURROUND:  
to select SAP.  
When the TV is turned on or a channel selection is  
made, the SAPwill appear on the screen.  
This means that the Second Audio Program broadcasting  
is available.  
Press  
or  
to select ONor OFF.  
ON: The dynamic presence and sound created offers  
a thoroughly enjoyable listening experience.  
OFF: Normal sound.  
Press CANCEL to clear the menu screen.  
3
STEREO  
SAP  
CANCEL  
I To return BASS/TREBLE/BALANCE control  
adjustments to the factory preset levels  
Press  
or  
to select RESET, then press  
.
30  
J5X00301A [E] (P26-30)  
30  
16/3/06, 3:51 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Playing a disc  
This section shows you the basics on how to play a disc.  
CAUTION  
Keep your fingers well clear of the disc slot when disc is  
loading or unloading. Neglecting to do so may cause serious  
personal injury.  
POWER VOLUME  
PLAY STOP EJECT  
+
/–  
DVD  
VCD  
CD  
Basic playback  
Preparations:  
When connecting to other equipment, turn the power off.  
Press POWER on the unit or on the remote control  
On the TV-screen, 0changes to Readingand then  
to turn on the unit.  
playback commences.  
1
4
The Power indicator on the front of the main unit will light.  
Every time you press POWER, theTV/DVD starts from  
TV mode.  
Reading  
When using an amplifier, switch on the amplifier.  
A menu screen will appear on the TV screen if  
Press TV/DVD on the remote control to select DVD  
the disc has a menu feature.  
mode.  
2
Press  
/
or  
/
to select title, then press  
The DVD startup screen will appear on the screen.  
ENTER. Title is selected and play commences.  
Press VOLUME + or to adjust the volume.  
5
6
VOLUME  
32  
Load a disc in the disc slot.  
3
Press STOP to end playback.  
I Resuming facility  
The unit records the stopped  
point, depending on the disc.  
appears on the screen.  
Press PLAY to resume  
playback (from the scene point).  
If you press STOP again  
(Iappears on the screen.),  
the unit will clear the stopped  
point.  
Load the disc in the disc slot with the label side facing  
forward. (If the disc has a label.) Hold the disc without  
touching either of its surfaces, align it with the guides,  
and place it in position.  
I To start playback in the stop mode  
Press PLAY.  
Note:  
If the unit does not operate properly:  
Static electricity, etc., may affect the TV/DVDs operation. In such  
case, disconnect the AC cord, then connect it again.  
31  
J5X00301A [E] (P31-35)  
31  
16/3/06, 3:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Playing a disc (Continued)  
To obtain a higher quality picture  
Occasionally, some picture noise may appear on the TV screen while playing a  
DVD video disc because the high resolution pictures on these discs include a lot  
of information. In such case, you may reduce the SHARPNESS with the Picture  
control adjustment menu (see page 28).  
POWER  
TV/DVD  
EJECT  
VOL +/–  
ENTER  
DVD VCD  
CD  
About  
/
/
/
DVD VCD  
CD  
The  
icons on the heading bar show the playable discs for the  
function described under that heading.  
PAUSE  
PLAY  
STOP  
:You can use this function with DVD video discs.  
:You can use this function with Video CDs.  
VCD  
CD  
:You can use this function with Audio CDs and CD-R/RW CDs.  
DVD  
VCD  
CD  
Basic playback  
To pause playback (still mode)  
Press PAUSE during playback.  
To remove the disc  
Press EJECT.  
To resume normal playback, press  
PLAY.  
Remove the disc after the disc comes  
out.  
The sound is muted during still  
mode.  
To stop playback  
Press STOP.  
Notes:  
If a non-compatible disc is loaded, Incorrect Disc, Region Code Erroror Parental Errorwill appear on the TV screen  
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 50).  
Some discs may take a minute or so to start playback.  
When you set a single-faced disc label downwards (ie. the wrong way up), Readingwill appear on the display for a few  
minutes and then Incorrect Discwill continue to be displayed.  
Some discs may not work the resuming facility.  
Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.  
Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according  
to the disc contents the software producers designed, some playback features may not be available. Also refer to the  
instructions supplied with the DVDs.  
Do not move the unit during playback. Doing so may damage the disc.  
Use the EJECT button to unload and eject the disc.  
Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.  
There may be a slight delay between the button is pressed and the function activates.  
32  
J5X00301A [E] (P31-35)  
32  
16/3/06, 3:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REV  
PLAY  
PAUSE  
FWD  
SKIP  
/
SLOW  
/
DVD  
VCD  
CD  
Playing in fast reverse or fast forward directions  
To resume normal playback  
Press PLAY.  
Press REV or FWD during playback.  
REV: Fast reverse playback  
FWD: Fast forward playback  
Notes:  
The TV/DVD mutes sound during reverse and forward scan  
of DVD and Video CD discs. Howerer, the TV/DVD plays  
sound during fast forward or fast reverse play of audio CDs.  
The playback speed may differ depending on the disc.  
Each time you press REV or FWD  
button, the playback speed changes.  
DVD  
VCD  
Playing frame by frame  
To resume normal playback  
Press PLAY.  
Press PAUSE during still playback.  
Each time you press PAUSE, the  
picture advances one frame.  
Note:  
The sound is muted during frame by frame playback.  
DVD  
VCD  
Playing in slow-motion  
To resume normal playback  
Press PLAY.  
Press SLOW  
during playback.  
(REVERSE) or  
(FORWARD)  
Each time you press the button, the  
slow-motion speed changes.  
Notes:  
The sound is muted during slow-motion playback.  
The Video CD cannot play Reverse Slow.  
DVD  
VCD  
CD  
Locating a chapter or track  
Press SKIP  
or  
repeatedly to display the chapter or track number you want.  
Playback starts from the selected chapter or track.  
Playback starts from the beginning of  
the current chapter or track.  
To locate succeeding chapters or  
tracks.  
When you press twice in quick successions,  
playback starts from the beginning of  
the preceding chapter or track.  
Note:  
A Prohibitionsymbol may appear at the upper right of the screen. This symbol means either the feature you tried is not  
available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.  
33  
J5X00301A [E] (P31-35)  
33  
16/3/06, 3:52 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Zooming/Locating desired scene  
09  
ZOOM  
JUMP  
CANCEL  
ENTER  
/
/
/
RECALL  
DVD  
VCD  
CD  
DVD  
VCD  
CD  
Zooming  
Locating desired scene  
This unit will allow you to zoom in on the frame image. You  
can then make selections by switching the position of the  
frame.  
Use the title, chapter and time recorded on the DVD disc to  
locate the desired point to playback. In the case of VCD/CD  
discs, time and track are used to locate the desired point to  
playback.  
To check the title, chapter and time, press RECALL.  
Press ZOOM during playback.  
PressJUMPduringplaybackorresumestopmode.  
1
1
The center part of the image will be  
zoomed in.  
Each press of ZOOM will change the  
Jump  
Title  
Chapter  
Time  
ZOOM 1 (x 1.3), 2 (x 1.5) and  
3
(x 2.0).  
1
Press or to select the Time, Title/Track”  
or Chapter.  
2
Jump  
Title  
Chapter  
Time  
Press  
/
/
/
to view a different part of the  
frame.  
2
Press Number buttons (09) to input the  
number.  
You may move the frame from  
thecenterpositiontoUP,DOWN,  
LEFT or RIGHT direction.  
3
Jump  
Title  
Chapter  
Time  
12  
In the zoom mode, press ZOOM repeatedly to  
return to a 1:1 view ( Off).  
If you input a wrong number, press  
CANCEL.  
Refer to the package supplied with  
3
the disc to check the numbers.  
Notes:  
Press ENTER. Playback starts.  
You can select the Pause, Slow or Search playback in the zoom  
mode.  
Some discs may not respond to zoom feature.  
4
When you change the title,  
playback starts from Chapter 1  
of the selected title.  
Some discs may not work in the  
above operation.  
Note:  
In case of the Video-CD playback with PBC, the JUMP does not  
work. To turn off PBC, see page  
.
39  
34  
J5X00301A [E] (P31-35)  
34  
16/3/06, 3:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat playback/A-B Repeat playback  
PLAY MODE  
ENTER  
PLAY  
SKIP  
/
REPEAT A-B  
DVD  
VCD  
DVD  
VCD  
Repeat playback  
A-B Repeat playback  
A-B repeat playback allows you to repeat a section between  
two selected points.  
Press PLAY MODE during playback or stop  
mode.  
1
2
Press REPEAT A-B during playback.  
1
The start point is selected.  
A
[DVD]  
Press ENTER to select Chapteror Title.  
The unit automatically starts  
repeat playback after finishing  
the current title or chapter.  
Press REPEAT A-B again.  
Play Mode  
Repeat  
: Off  
2
The end point is selected. Playback  
starts at the point that you selected.  
Playback stops at the end point and  
returns to Point A automatically,  
then starts again.  
[Video CD]  
Press to select Repeat.  
Press ENTER to select Trackor All.  
The unit automatically starts  
A
B
repeat playback after finishing  
the current track.  
Play Mode  
Mode  
: Off  
Repeat  
: Off  
To resume normal playback  
Press REPEAT A-B again.  
If you set the repeat mode during stop mode,  
press PLAY to start Repeat playback.  
appears on the screen.  
Off  
[Audio CD and MP3/WMA CD]  
Please Repeat playback (CD)”  
.
44  
Notes:  
In A-B Repeat mode, subtitles near the A or B locations may  
not be displayed.  
Press PLAY MODE again to clear the screen.  
You cannot set the A-B Repeat for the scenes that include  
multiple angles.  
A-B Repeat playback does not work when Repeat playback is  
activated.  
You may not be able to set A-B Repeat, during certain scenes  
of the DVD.  
A-B Repeat does not work with an interactive DVD, MP3/WMA/  
JPEG CD.  
3
To resume normal playback  
Select Repeat : Offin step 2.  
Notes:  
Some discs may not work with the repeat operation.  
In case of Video CD with PBC, Repeat functions are  
prohibited during playback.  
A-B Repeat is prohibited when PBC is on.  
Chapter/Track repeat function is canceled whenever SKIP  
or  
is pressed.  
35  
J5X00301A [E] (P31-35)  
35  
16/3/06, 3:53 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Program playback/Random playback  
09  
You can arrange the playback order of tracks or files on the disc.  
And the unit can also select tracks or files at random and playback  
them. These feature works for Video CD.  
CANCEL  
PLAY MODE  
For Audio CD and MP3/WMA CD, please see Random playback  
L/ M/  
ENTER  
/
44  
45  
(CD)”  
and Program playback (CD)”  
.
PLAY  
VCD  
Program playback  
Press PLAY MODE in the stop mode.  
Press  
press  
/
/
to return to the left column, then  
to select the Program Playback”  
4
1
Play Mode  
and press ENTER.  
Mode  
: Off  
1
2
3
— — —  
— — —  
— — —  
Repeat  
: Off  
The programs you selected will startto playback in order.  
Program Playback  
To resume normal playback, select Mode:  
Offin step 2.  
Press  
or  
to select Mode, then press  
ENTER to select Program.  
2
3
Play Mode  
Mode  
: Program  
1
2
3
9
3
Play Mode  
Repeat  
: Off  
Mode  
: Program  
1
2
3
– – –  
– – –  
– – –  
11  
Program Playback  
Repeat  
: Off  
Program Playback  
Press  
/
to select the programming position.  
I To change the program  
Use Number buttons (09) to input the Track on  
sequentially.  
1. Select Mode to Program(as step 2), press / / /  
to select the track/file number you want to change, then  
press CANCEL.  
2. Press Number buttons (09) to overwrite the new  
To program others, repeat step 3.  
If you input a wrong number, press  
CANCEL.  
track/file number.  
I To clear the program one by one  
Select Mode to Program, press / / / to select the  
track number. Then press CANCEL.  
I To clear all the programs  
Play Mode  
In the left column, press  
Then press ENTER.  
Notes:  
/
to select Clear Program.  
Mode  
: Program  
1
2
3
9
Repeat  
: Off  
– – –  
– – –  
Program Playback  
In playing back the Video CD with PBC, you cannot set  
Program playback.  
The program is canceled when you eject the disc or turn the  
power off.  
VCD  
Random playback  
Press PLAY MODE during playback or stop  
mode.  
Press PLAY.  
1
3
The Random Playback will start.  
If you set Randomduring playback mode,  
Random playback will begin after the track/file  
that is currently being played has ended.  
To resume normal playback, select Mode: Offin  
step 2.  
Press  
/
to select Mode, then press  
ENTER to select Random.  
2
Play Mode  
Mode  
: Random  
1
2
3
– – –  
– – –  
– – –  
Repeat  
: Off  
Program Playback  
Note:  
In case of Video CD with PBC, you cannot set Random  
function during playback.  
36  
J5X00301A [E] (P36-40)  
36  
16/3/06, 3:54 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing angles/Title selection/DVD menu  
TOP MENU  
DVD MENU  
L/ M/  
/
ENTER  
PLAY  
ANGLE  
Changing angles  
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.  
Press ANGLE during playback.  
Press ANGLE repeatedly until the desired angle  
is selected.  
1
2
The current angle will appear.  
1/2  
Note:  
Depending on the DVD, you may not be able to change the  
angles even if multi-angles are recorded on the DVD.  
Title selection  
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.  
Press TOP MENU during playback.  
Press ENTER or PLAY.  
1
2
3
The playback of the selected title will  
start.  
Title menu appears on the screen.  
Press  
/
/
/
to select the desired title.  
Note:  
Depending on the DVD, you may not be able to select the title.  
Depending on the DVD, a title menumay simply be called a  
menuor titlein the instructions supplied with the disc.  
DVD menu  
Some DVDs allow you to select the disc contents using the menu.  
When you playback these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.  
Press DVD MENU during playback.  
The DVD menu appears on the screen.  
Press ENTER.  
1
2
3
The menu continues to another  
screen. Repeat steps 2 and 3 to set  
the item completely.  
Press DVD MENU again to resume  
playback at the scene when you  
pressed DVD MENU.  
Press  
/
/
/
to select the desired item.  
Note:  
Depending on the DVD, you may not be able to resume playback  
from the scene point when you press the DVD MENU button.  
37  
J5X00301A [E] (P36-40)  
37  
16/3/06, 3:54 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Changing soundtrack language/  
Subtitles  
SUBTITLE  
AUDIO  
DVD  
VCD  
Changing soundtrack language  
Subtitles  
You can select the language when you play a multilingual When playing back a disc recorded with subtitles, you can  
disc.  
select the subtitle language or turn the subtitle off.  
Press AUDIO during playback.  
PressSUBTITLErepeatedlyduringplaybackuntil  
the desired language is selected.  
1
1
The current soundtrack language will  
appear.  
1/5 Eng  
1/2 Eng Dolby Digital  
To turn off the subtitle, press SUBTITLE until  
Offappears.  
2
Press AUDIO repeatedly until the desired lan-  
guage is selected.  
Off  
2
2/2 Fre Dolby Digital  
The on screen display will disappear after a  
few seconds.  
The on screen display will disappear after a few  
seconds.  
Notes:  
Depending on the DVD, you may not be able to change  
subtitles, or to turn subtitles on or off.  
While playing a DVD, the subtitle may change when  
you loaded or eject the disc.  
In case of Video CD playback  
Audio type changes as follows each time you press AUDIO.  
In some cases, a selected subtitle language may not  
be changed immediately.  
LR  
L
R
Notes:  
If the desired language is not heard after pressing the  
button several times, the language is not recorded on  
the disc.  
The selected soundtrack language is canceled when you  
eject the disc. The initial default language or available  
language will be heard if the disc is played back again.  
If you select DTS in playing DTS-encoded disc, no  
sound will be heard from the TV/DVDs speakers.  
38  
J5X00301A [E] (P36-40)  
38  
16/3/06, 3:54 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Disc status/To turn off the PBC  
RECALL  
PLAY MODE  
/
ENTER  
DVD  
VCD  
VCD  
Disc status  
To turn off the PBC  
(see page 8)  
With each press of RECALL, the status of the  
disc will appear on the screen and change as  
follows.  
Press PLAY MODE in the stop mode.  
1
To cancel the display, press RECALL again.  
Press  
/
to select Mode, then press  
ENTER repeatedly until Offappear.  
2
Play Mode  
Mode  
: Off  
DVD  
1
2
3
— — —  
— — —  
— — —  
ELAPSED TOTAL  
DISC OPERATION  
Repeat  
: Off  
TIME  
TIME  
Program Playback  
Press PLAY MODE again to clear the screen.  
TITLE NO.  
DVD  
00:15:25 01:41:39  
Chapter 2/24  
1/2 Eng  
Title 1/3  
CHAPTER  
NO.  
3
1/1 Eng Dolby Digital  
1/1  
I To turn on the PBC  
Follow the above steps 1~2, then press ENTER repeatedly  
until PBCappear.  
ANGLE NO.  
SUBTITLE LANGUAGE  
A KIND OF AUDIO  
AUDIO LANGUAGE  
Note:  
You can also turn off the PBC by pressing number button 1  
and ENTER in the stop mode.  
Video CD  
ELAPSED TOTAL  
TIME TIME  
DISC OPERATION  
VCD  
00:08:32 00:51:03  
Track 3/15  
TRACK NO.  
39  
J5X00301A [E] (P36-40)  
39  
16/3/06, 3:54 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
MP3/WMA/JPEG/DivX® and Audio CD operation  
ThisplayercanplaybacktheMP3/WMA/JPEG/DivX®-datawhichhasbeenrecordedonCD-RorCD-RW.ToproducetheMP3/  
WMA/JPEG/DivX®-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG/DivX®-encoding Software (not  
supplied). The Apple-HFS-System cannot be played.  
This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.  
There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Not all  
recordable discs will produce optimal playback quality. The technical criteria set forth in this owner's manual are meant  
only as a guide. Use of CD-RW for MP3 files is not recommended.  
You must obtain any required permission from copyright owners to download or use copyrighted content.  
Toshiba cannot and does not grant such permission.  
CD/MP3/WMA/JPEG/DivX® CD information  
CD  
Limitations on MP3/WMA/JPEG/DivX® CD playback  
MP3/WMA/JPEG/DivX® CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension  
letters, .mp3, .wma, .jpg, .div, .divx, .avi.  
MP3/WMA/JPEG/DivX® CD must be correspond to the ISO standardized files.  
This unit can read 600 files per disc. If one directory has more than 600 files, it reads up to 600 files, the remaining  
files will be omitted.  
The unit is able to recognize up to a maximum of 50 directories per disc.  
MP3/WMA/JPEG/DivX® CDs cannot be used for the purpose of recording.  
If the CD has both CDA audio tracks and MP3/WMA/JPEG/DivX® files, only the CDA audio tracks will be played.  
It may take more than one minute for this unit to read MP3/WMA/JPEG/DivX® files depending on its structure.  
Music recorded by Joliet Recording Specificationcan be played back, the file name is displayed (within 15 letters) on  
the screen. Long file names will be condensed.  
The music files recorded by Hierarchical File System(HFS) cannot be played.  
Limitations on display  
The maximum number for display is 15 letters.  
Available letters for display are the following:  
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).  
Other letters than those above are replaced in hyphen.  
Notes on MP3/WMA/JPEG/DivX® files  
To playback MP3/WMA/JPEG/DivX® CD in the recorded order,  
1. Use MP3/WMA/JPEG/DivX® software that records data alphabetically or numerically.  
2. Name each file including two-digit or three-digit number (ex. 01” “02or 001” “002).  
3. Refrain from making too many sub-folders.  
CAUTION:  
Some MP3/WMA/JPEG/DivX® CDs cannot be played back depending on the recording conditions.  
The CD-R/RW that has no music data or non MP3/WMA/JPEG/DivX® files cannot be played back.  
Standard, sampling frequency, and the bit rate:  
MP3 CD  
MPEG-1 Audio  
32kHz, 44.1kHz, 48kHz  
32kbps ~ 320kbps (constant bit rate or variable bit rate)  
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant  
bit rate.  
WMA CD  
WMA version 7, and 8  
32kHz/48kbps, 44.1kHz/48kbps~192kbps, 48kHz/128kbps~192kbps  
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.  
DivX® video  
DivX® version: DivX® 3, 4, 5, and 6 (specifically 3.1.1, 4.1.2, 5.0.2, 5.0.5, 5.1.1, 5.2.1, 6.0 at Home Theater profile).  
Audio format: MPEG1 Layer2 (MP2), MPEG1 Layer3 (MP3)  
Sampling frequencies: 32kHz, 44.1kHz, 48kHz  
Bit rate: 32kbps ~ 320kbps  
Resolution: Max 720 x 576 (at 25fps), Max 720 x 480 (at 30fps)  
Microsoft, Windows Media, and Windows Logo are either registered trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries.  
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.  
40  
J5X00301A [E] (P36-40)  
40  
16/3/06, 3:54 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOP MENU  
L/ M/  
/
ENTER  
RETURN  
PLAY  
STOP  
CD  
MP3/WMA CD playback  
Load a disc on which MP3 or WMA files have  
been recorded in the disc slot.  
About file menu  
1
2
A file browser screen will appear on the screen.  
3/15 00:00:00  
/Folder-1/WMA-11.WMA  
Select Files  
Repeat :Off  
Mode :Off  
MP3-5  
MP3-6  
WMA-11  
WMA-12  
Picture-1  
Picture-2  
Movie-1  
Movie-2  
Music Playing  
Press  
/
to select file.  
3
/MP3-2.MP3  
Select Files  
Folder-1  
Folder-2  
MP3-1  
Repeat :Off  
Mode  
:Off  
MP3-2  
MP3-3  
WMA-1  
WMA-2  
WMA-3  
JPEG Preview  
Notes:  
In case the current directory includes more than 8  
files, press or to scroll in the file list.  
To see contents in folder, select the folder and then  
press ENTER. To return to the upstairs directory,  
select Go Up ...then press ENTER.  
When PLAY is pressed after the file browser  
displayed, playback begins automatically starting  
from the first file. In this case, if the first file is an  
MP3/WMA file, only MP3/WMA files are played back  
in order. If the first file is a JPEG file, the first JPEG  
file is played back. If the first file is a DivX® file, the  
first DivX® file is played back. If there is no file at a  
root directry, playback does not begin automatically.  
The thumbnail list is displayed when the FUJICOLOR  
CD or the Kodak Picture CD are played. To display the  
file browser, press TOP MENU.  
In the case of a CD containing a mixture of MP3, WMA,  
JPEG and DivX® files, the files are played back by  
selecting them from the file browser.  
MP3 or WMA file on the Kodak Picture CD is not  
recognized on this unit.  
Notes:  
During MP3/WMA/JPEG Playback, you cannot use JUMP and  
A-B Repeat functions.  
You can use Repeat (Track or All), Random functions and  
Program playback for MP3/WMA/JPEG/DivX® CD Playback  
Press ENTER.  
The selected file starts playing back.  
,
45  
.
44  
4
Select Files  
The file type to make it display in the file browser can be  
chosen.  
1. Press or tohighlightSelectFilesatrightcolumn  
in the file browser.  
Press STOP to end playback.  
2. Press ENTER, then press or to select file type  
from the list (Music, Picture or Movie).  
3.PressENTERtoadd/removecheckmark.Checked  
file type will be displayed in the file browser.  
4.Press RETURN to save the setting.  
5
The unit records the stopped point. “ ” appears on  
the screen. Press PLAY to resume playback (from  
the scene point).  
If you press STOP again or unload the disc, the unit  
will clear the stopped point.  
41  
J5X00301A [E] (P41-47)  
41  
16/3/06, 3:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
MP3/WMA/JPEG/DivX® and Audio CD  
operation (Continued)  
STOP  
TOP MENU  
DVD MENU  
L /M /  
You can select your desired JPEG file on the file menu and picture menu.  
The selected JPEG file is automatically adjusted to the TV screen. (When the  
aspect ratio of the JPEG file is different to the TV screen, the black bar will  
appear at the top and bottom, or the both sides of the TV screen.)  
/
ENTER  
PAUSE  
PLAY  
SKIP ¢  
ANGLE  
CD  
CD  
JPEG CD playback  
Slide show playback  
The slide show enables you to view pictures (files) one after  
another automatically.  
Load a JPEG disc in the slot.  
1
2
Preparation:  
A file browser screen  
will appear on the  
screen.  
Set JPEG Intervalsetting to 5 Seconds, 10 Seconds”  
/Picture-01.JPG  
Select Files  
Picture-01  
Picture-02  
Picture-03  
Picture-04  
Picture-05  
Picture-06  
Picture-07  
Picture-08  
or 15 Seconds”  
.
49  
Repeat :Off  
Mode  
:Off  
Select your desired starting file for the slide  
show in the step 3 on left.  
W: 2048 H: 1536  
1
2
PressENTERorPLAYtostartslideshowfrom  
the selected file.  
Press  
/
to select the file.  
To display a thumbnail list, press DVD MENU.  
3
Press  
/
or  
/
to select the desired file.  
(To return to a file browser, press TOP MENU.)  
If you press PAUSE during the slide show, the slide  
show stops temporary.;appears briefly on the screen.  
If the picture appears upside down or sideways, press  
ANGLE repeatedly until its right side up.  
When PLAY is pressed after displaying the  
file browser, playback begins automatically  
starting from the first file. In this case, if the first  
file is a JPEG file, the first JPEG file is played  
back. If the first file is a DivX® file, the first  
DivX® file is played back.  
, “ ”, “  
or “ ” appears on the screen.  
again to resume the slide show.  
Press PLAY or SKIP  
When the slide show playback finished, the file list  
appears.  
To stop the slide show, press STOP.The file list appears.  
If the first file is an MP3/WMA file, only MP3/  
WMA files are played back in order. If there  
is no file at a root directory, playback does  
not begin automatically.  
Notes:  
Zoom function also can be used in viewing JPEG files.  
See Zooming34  
During JPEG playback, you cannot use Jump and A-B  
Repeat functions.  
.
Press ENTER or PLAY. The selected picture  
appears on the screen.  
4
5
Rotating an image  
You can rotate an image by 90 degrees.  
Press ANGLE during playback of the image.  
,“ ”,“  
orappearsonthescreen.  
Press STOP to end playback.  
The file browser appears on the  
screen. If you want to watch the other  
file, repeat steps 3 ~ 4.  
42  
J5X00301A [E] (P41-47)  
42  
16/3/06, 3:55 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOP  
L/M  
ENTER  
PLAY  
Playing DivX® VOD content  
DivX® CD playback  
CD  
CD  
Load a disc on which DivX® files have been  
recorded in the slot.  
DivX® VOD content is protected by DRM (Digital Rights  
Management) system. This restricts playback of content  
to specific registered devices.  
1
2
A file browser screen will appear on the  
screen.  
If the incorrect DRM file is  
/Movie-01.DIVX  
loaded, Authorization  
Error This player is not  
authorized to play this  
video.will appear on the  
screen.  
View DivX® VOD Rental  
Select Files  
Movie-01  
Repeat :Off  
Movie-02  
Movie-03  
Movie-04  
Movie-05  
Movie-06  
Movie-07  
Movie-08  
This rental has 5 views left.  
Mode :Off  
Do you want to use one  
of your 5 views now?  
JPEG Preview  
Yes  
No  
When you attempt to play  
DivX® VOD, the number of  
Press  
/
to select file.  
plays is limited and the right message will appear on  
the screen. If you wish to play it, select YES.  
3
If the number of plays goes over the limit, then  
Rental Expiredwill be displayed, in this case the  
file will not be played.  
Note:  
When PLAY has been pressed after displaying  
the file browser, playback begins automatically  
starting from the first file. In this case, if the first  
file is a JPEG file, the first JPEG file is played  
back. If the first file is a DivX® file, the first  
DivX® file is played back. If the first file is an  
MP3/WMA file, only MP3/WMA file are played  
back in order. If there is no file at a root  
directory, playback does not begin automati-  
cally.  
In order to play DivX® VOD content on this unit, you first  
need to register the unit with registration code. See page  
51  
.
Press ENTER or PLAY. The selected DivX®  
movie will be played back on the screen.  
4
5
Press STOP to end playback.  
The file browser appears on the  
screen. If you want to watch the  
other file, repeat steps 3 ~ 4.  
43  
J5X00301A [E] (P41-47)  
43  
16/3/06, 3:56 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Repeat and program playback using file  
browser  
L /M /  
/
ENTER  
PLAY  
SKIP  
/
CD  
CD  
Repeat playback (CD)  
Random playback (CD)  
In the file browser, press  
Modeduring stop mode.  
/
or  
/
to select  
In the file browser, press  
Repeatduring stop mode.  
/
or  
/
to select  
1
1
Select Files  
Folder-1  
Folder-2  
MP3-1  
Repeat :Off  
Mode  
:Off  
MP3-2  
MP3-3  
Press ENTER to select Random.  
Press ENTER to select Trackor All.  
2
3
2
3
Select Files  
Repeat :Track  
Mode :Off  
Folder-1  
Folder-2  
MP3-1  
MP3-2  
MP3 3  
Press PLAY.  
Press PLAY.  
The Random playback will start.  
The unit automatically starts repeat  
playback after finishing the current  
track.  
To resume normal playback  
Select Mode : Offin step 2.  
To resume normal playback  
Select Repeat : Offin step 2.  
Notes:  
The program is canceled when you eject the disc or turn  
the power off.  
In case of Audio CD, the function of A-B Repeat can be  
used. See A-B Repeat playback”  
.
47  
Track repeat function is canceled whenever SKIP  
or  
is pressed.  
44  
J5X00301A [E] (P41-47)  
44  
16/3/06, 3:56 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L/ M/  
/
ENTER  
PLAY  
CD  
Program playback (CD)  
In the file browser, press  
/
or  
/
to select  
Press  
/
or  
/
to select Program View,  
Edit Mode, then press ENTER.  
then press ENTER. Program View shows only the  
programed files that you have added in step 2.  
4
5
1
MP3-1  
MP3-2  
MP3-3  
WMA-3  
Folder-1  
Folder-2  
MP3-1  
Edit Mode  
Browser View  
Clear Program  
Repeat :Off  
Mode :Off  
Edit Mode  
MP3-2  
MP3 3  
JPEG Preview  
When Edit Modeis black color,  
you can mark the files which you want  
to add into Program list.  
Program View  
Press  
/
or  
/
to select file you want to  
Folder-1  
Folder-2  
MP3-1  
Edit Mode  
Program View  
Add To Program  
add into the program list.  
2
3
Folder-1  
MP3-2  
Repeat :Off  
Mode :Off  
Folder-2  
MP3-1  
MP3-2  
MP3-3  
WMA-1  
WMA 2  
MP3-3  
Edit Mode  
WMA-1  
WMA-2  
WMA-3  
JPEG Preview  
Browser View  
JPEG Preview  
Press ENTER. Selected file was  
marked.  
Repeat this procedure to select the  
other files.  
In the Program View, press PLAY. The files  
start to playback in programmed order that  
were added by you.  
To remove file from program list  
Press  
/
or  
/
to select Add To Program.  
In the Edit Mode, switch to Program View. Select  
file you want to remove, then press ENTER.  
Select Clear Programand press ENTER.  
Marked file is removed from program list.  
Then press ENTER. All marked files are added  
into the program list.  
Folder-1  
Folder-2  
MP3-1  
Edit Mode  
Program View  
Add To Program  
MP3-2  
MP3-3  
WMA-1  
WMA-2  
JPEG Preview  
When you finish store all files which  
you want into the Program list,  
select Edit Modeand press  
ENTER to release edit mode.  
45  
J5X00301A [E] (P41-47)  
45  
16/3/06, 3:56 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
SETUP  
Customizing the function settings  
ENTER  
L /M /  
You can change the default settings of the DVD mode to customize perfor-  
mance to your preference.  
/
RETURN  
DVD  
VCD  
CD  
Setting procedure  
Press SETUP during stop mode.  
ChangetheselectionusingL or M , byreferring  
48 51  
1
to the corresponding pages  
~
.
5
6
The following on-screen display appears.  
Press ENTER to save the setting.  
Menu
Subtitle:English  
Audio: English
: English  
Repeat steps 3 and 5 to change  
other option.  
To select another section, go  
back to step 2 by pressing  
repeatedly.  
To clear SETUP screen, press SETUP or  
RETURN.  
Press L or M to select the desired section, then  
press  
.
2
3
4
TVScreen  
: 4:3
Display:On
PictureMode : Auto
JPEG Interval:Off  
First option will be highlighted. Press Lor M  
to select the desired option.  
TVScreen  
: 4:3
Display:On
PictureMode : Auto
JPEG Interval:Off  
Then press or ENTER. The selectable  
settings will appear.  
TVScreen  
4:3
Display4:3
PictureMode : Auto
JPEG Interval:Off  
46  
J5X00301A [E] (P41-47)  
46  
16/3/06, 3:56 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting details  
Section  
Option  
Details  
Page  
Menu  
Subtitle  
Audio  
To select the language of Menu, Subtitleand  
Audioif more than one language are available on  
the disc.  
48  
TV Screen  
Display  
To select a picture size according to the aspect  
ratio of your TV.  
48  
49  
To turn On or Off the operational status display on  
the screen.  
Picture Mode  
JPEG Interval  
To select a preferred picture mode from Video,  
Filmor Auto.  
To select a preferred setting for the slide show  
playback.  
DRC  
To select On or Off for DRC (Dynamic Range Control).  
50  
Parental  
To select a preferred parental level for the  
parental setting.  
50  
51  
Password  
DivX(R) VOD  
Input 4-digit password to set the parental level.  
Todisplayyour8-characterregistrationcode.  
47  
J5X00301A [E] (P41-47)  
47  
16/3/06, 3:56 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the function settings (Continued)  
Setting details  
Menu
Subtitle:English  
Audio: English
: English  
TVScreen  
: 4:3
Display:On
PictureMode : Auto
JPEG Interval:Off  
Menu, Subtitle, Audio  
TV Screen  
You have the following screen sizes to choose from:  
4:3 (Letter box):  
You can select the language of Menu, Subtitleand  
Audioif more than one languages are recorded onto  
the disc.  
Select this mode when connecting to a  
conventional TV. When playing back a wide  
screen-DVD disc, it displays the wide picture  
with black bands at the top and bottom of  
screen.  
English, Francais, Espanol:  
The selected language will be heard or seen.  
Other:  
Other language can be selected (see Language  
code list”  
).  
53  
Original (Audio):  
The unit will select the first priority language of  
each disc.  
4:3  
(Pan & scan):  
It displays the wide picture on the whole screen  
with left and right edges automatically cut off.  
Off (Subtitle):  
Subtitles do not appear.  
Note:  
If the DVD disc is not formatted in the Pan & scan style,  
it will display 4:3 style.  
Notes:  
If the selected language is not recorded on the disc, the  
first-priority language is selected.  
If you want to change the OSD language, you can perform  
Display  
it by TV SETUP MENU  
.
21  
On screen display can be switched on or off when you  
press any buttons.  
On: On screen displays appear when you press  
the buttons (factory setting).  
Off: On screen displays do not appear when you  
press any buttons.  
48  
J5X00301A [E] (P48-52)  
48  
16/3/06, 3:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Mode  
JPEG Interval  
There are two types of source content in pictures  
recorded in DVD video discs: film content (pictures  
recorded from films at 24 frames per second) and  
video content (video signals recorded at 30 frames per  
second). Make this selection according to the type of  
content being viewed.  
You can continuously playback all JPEG files  
automatically.  
After the selection below, the disc will start playback on  
which JPEG files have been recorded.  
Off:  
Plays back one file at a time.  
Auto: Select this position normally.  
The DVD player automatically detects  
source content, film or video of  
5 Seconds:  
Plays back images in the form of a slide show at  
playback source, and converts that  
signal in the progressive output format  
in an appropriate method.  
5 second intervals.  
10 Seconds:  
Plays back images in the form of a slide show at  
10 second intervals.  
Film: The DVD player converts film content  
pictures in the progressive output  
format appropriately. Suitable for  
15 Seconds:  
playback of film content pictures. The  
progressive output feature will be most  
effective under this selection.  
Plays back images in the form of a slide show at  
15 second intervals.  
Video: The DVD player filters video signal and  
converts it in the progressive output  
format appropriately.  
Suitable for playback of video content  
pictures.  
Note:  
Depending on the disc, pictures may be cut off or  
doubled. In this case, select Video.  
49  
J5X00301A [E] (P48-52)  
49  
16/3/06, 3:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the function settings (Continued)  
Setting details  
DRC
: Off  
Parental  
: Off
: Change  
: Display  
Password
DivX(R) VOD  
DRC  
Parental control setting  
Some discs are specified as not suitable for children.  
Such discs can be limited not to playback with the unit.  
DRC (Dynamic Range Control) enables you to control  
the dynamic range so as to achieve a suitable sound for  
your equipment.  
1) Press  
or  
to select Parental, then press  
ENTER. Enter Passwordscreen will appear.  
2) Press 0000using Number buttons (09).  
(Please note, this is pre-setting password of this  
unit). Then press ENTER. The parental level list  
will appear.  
Off:  
It plays back at the recording level on the disc.  
On:  
Loud sound such as explosion is toned down  
slightly when played back. This is suitable when  
it is connected to a stereo.  
Level Off: The parental control setting does not  
function.  
Level 8: All DVD software can be played  
back.  
Notes:  
Level 1: DVD software for adults cannot be  
played back.  
This function works only during playback of Dolby Digital  
recorded discs.  
3) Press  
or  
to select from the level 1 to level 8.  
The level of Dynamic Range Reduction may differ  
depending on DVD video disc.  
The limitation will be more severe as the level  
number is lower. Then press ENTER.  
Notes:  
Depending on the discs, the unit cannot limit playback.  
Some discs may not be encoded with specific rating  
level information though its disc jacket says adult.”  
For those discs, the age restriction will not work.  
The password is required every time when you  
change the parental level.  
If you input a wrong number, press CANCEL.  
50  
J5X00301A [E] (P48-52)  
50  
16/3/06, 3:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Set the new password  
or  
1) Press  
to select Password, then press  
ENTER. Enter Current Passwordscreen will  
appear.  
2) Press Number buttons (09) to input the current  
password (If the password has not been set yet  
after you purchase this unit, it is 0000).  
3) Then press ENTER. Enter New Passwordscreen  
will appear. Press Number buttons (09) to input  
the new password.  
4) Press ENTER. Now your new password has been  
set. Be sure to remember this number!  
If you forget the password.  
1) Press EJECT to remove the disc.  
2) While holding 7 down on the remote control and  
then press STOP on the front panel. Password  
Clearappears on the screen. Now the password  
has been returned to the initial value (0000).  
DivX® VOD  
In order to play DivX® VOD (Video On Demand)  
content on this unit, you first need to register the unit  
with your DivX® VOD content provider. You do this by  
generating a DivX® VOD registration code, which you  
submit to your provider.  
Press  
or  
to select DivX(R) VOD. Then press  
ENTER. Your 8-character registration code is  
displayed. Make a note of the code as you will need  
it when you register with a DivX® VOD provider.  
Then press ENTER to select Done.  
Note:  
48  
51  
) has completed, the unit  
If each setup (pages  
~
can always work under the same condition (especially  
with DVD discs).  
Each setup will be retained in the memory even if you  
turn the power off.  
51  
J5X00301A [E] (P48-52)  
51  
16/3/06, 3:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Temporary cancel the rating level by DVD disc  
09  
Depending on the DVD disc, the disc may try to temporarily cancel the rating  
level that you have set.  
It is up to you to decide whether to cancel the rating level or not.  
ENTER  
RETURN  
DVD  
Temporary cancel the rating level by DVD disc  
Note:  
Load a DVD disc.  
This temporary cancellation of rating level will be kept until the  
disc is ejected.  
When the disc is ejected, the original rating level will be set again  
automatically.  
1
If the DVD disc has been designed to  
temporarily cancel the Rating level, the screen  
which follows the Readingscreen will  
change, depending on which disc is played. If  
you select YESwith the ENTER key,  
password input screen will then appear.  
2
3
If NOis selected, press EJECT to remove  
the disc.  
Enter the password with Number buttons (09).  
Then press ENTER.  
To exit from the entry, press  
RETURN.  
Playback will commence if the entered  
password is correct.  
4
52  
J5X00301A [E] (P48-52)  
52  
16/3/06, 3:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Language code list  
Enter the appropriate code number for the initial settings Menu, Subtitleand/or Audio”  
.
48  
Language Name Code Language Name Code Language Name Code Language Name Code  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2322 Sundanese  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2919  
2921  
2922  
2925  
1529  
2931  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
3219  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
Breton  
1929 Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
1924 Pashto, Pushto 2629 Tonga  
1911 Persian  
1711 Polish  
1611 Turkish  
2622 Turkmen  
2630 Twi  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance 2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese  
2923 Volapük  
2911 Welsh  
1714 Wolof  
Danish  
Dutch  
English  
2928 Xhosa  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian 2918 Yiddish  
2211 Shona  
2924 Yoruba  
2914 Zulu  
1625 Latvian, Lettish 2232 Sindhi  
53  
J5X00301A [E] (P53-57)  
53  
16/3/06, 3:57 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting  
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer  
or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
POWER  
Make sure the connection of the AC adapter and AC cord.  
Try another AC outlet.  
TV/DVD does not operate.  
20  
Unplug unit, then plug it back in.  
TV BROADCAST RECEPTION  
Station or Cable TV may have problems, try another station.  
Check Volume adjustments.  
Check for sources of possible interference.  
23  
23  
56  
Poor sound or No sound.  
23  
14,15  
56  
Station or Cable TV may have problems, try another station.  
Check antenna or Cable TV connections, reorient antenna.  
Check for sources of possible interference.  
Poor picture or No picture.  
28  
Check picture control adjustments.  
Station or Cable TV may have problems, try another station.  
Station signal is weak, reorient antenna to receive weaker station. 14  
23  
Poor reception on some channels.  
Check for sources of possible interference.  
56  
Station or Cable TV may have problems, try another station.  
Make sure channels are set into memory.  
Check picture control adjustments.  
23  
22  
28  
Poor color or no color.  
Check antenna or Cable TV connections, reorient antenna.  
Check for sources of possible interference.  
14,15  
56  
23  
22  
Station or Cable TV may have problems, try another station.  
Make sure channels are set into memory.  
Cable TV company is scrambling signal.  
Check antenna or Cable TV connections, reorient antenna.  
Check all Cable TV connections.  
Picture wobbles or drifts.  
No CATV reception.  
14,15  
15  
22  
23  
Set TV/CABLE selection to the CABLE position.  
Station or Cable TV system problems, try another station.  
Horizontal or diagonal bars on  
screen.  
Check antenna or Cable TV connections, reorient antenna.  
Check for sources of possible interference.  
14,15  
56  
Make sure TV/CABLE selection is in the appropriate position.  
If using antenna, check UHF antenna connections.  
22  
14  
No reception above channel 13.  
No broadcast on station tuned.  
Auto power off feature worked.  
Sleep Timer is set.  
22  
23  
24  
TV shuts off.  
Power interrupted.  
TV station experiencing problems or program tuned is not closed  
captioned. Try another channel.  
Check Cable TV connection or VHF/UHF antenna, reposition or  
rotate antenna.  
Press CLOSED CAPTION button to turn on the closed caption  
decoder.  
23  
14,15  
25  
Closed - Caption is not activated.  
Display is not shown in your  
language.  
Select proper language in the menu options.  
21  
54  
J5X00301A [E] (P53-57)  
54  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
DVD  
No disc is loaded.  
The disc may be dirty. Clean up the disc.  
The unit cannot play CD-ROMs, etc.  
31  
7
8
Playback doesnt start.  
No picture.  
TV/DVD selector is not set correctly.  
31  
Check the input selector of the amplifier is set properly.  
The unit is in the special playback mode.  
Select the correct Audio Input/Output position on AV amplifier.  
33  
18  
No sound.  
Picture is distorted during fast  
reverse/forward playback.  
The picture will be distorted occasionally.  
Stopping playback, search, slow-  
motion play, repeat play, or  
program play, etc. cannot be  
performed.  
Some discs may not do some of the functions.  
No on-screen display.  
Set Display to On.  
48  
The unit or remote operation key  
is not functioning.  
Turn off the unit and unplug the AC power cord for several  
minutes, then replug it.  
Playback does not start when the  
title is selected.  
Check the RATING LEVEL setup.  
50  
38  
38  
Audio soundtrack and/or subtitle  
language is not changed when  
you playback a DVD.  
Multilingual language is not recorded on the DVD disc.  
Some discs have no subtitles.  
Subtitles are cleared. Press the SUBTITLE button.  
No subtitle.  
Angle cannot be changed.  
appears on the screen.  
REMOTE CONTROL  
Multi-angles are not recorded on the DVD disc.  
37  
33  
The function is prohibited with the unit or the disc.  
The remote control does not  
function.  
Aim the remote control at the remote sensor.  
Operate within approx. 5 meters or reduce the light in the room.  
Clear the path of the beam.  
13  
The batteries are weak. Replace the batteries.  
Check the batteries are inserted correctly.  
55  
J5X00301A [E] (P53-57)  
55  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable  
TV system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is  
the direct path and the other is reflected by tall buildings, hills or other  
large objects. Changing the direction or position of the antenna may  
improve the reception.  
SNOW  
If the TV/DVD is located far from the TV station, in a fringe reception  
area where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a  
loss of contrast in the picture. Changing the direction and position of  
the antenna or installing an RFI filter may improve the picture.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.  
Use caution when cleaning or wiping the plastic parts.  
56  
J5X00301A [E] (P53-57)  
56  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power supply  
Power consumption  
Weight  
AC 120V 60Hz (with supplied AC adapter)  
Operation: 50 W, Stand by: 1 W (with supplied AC adapter)  
13.2 lbs (6.0 kg)  
Dimensions  
Width: 18-3/4 inches (476 mm)  
Height: 13-15/16 inches (353.5 mm)  
Depth: 9-1/16 inches (230 mm)  
Operating temperature  
Operating humidity  
5˚C-40˚C (41˚F-104˚F)  
Less than 80% RH (No condensation)  
Television  
LCD panel  
15-inch diagonal (Screen size is approximate.)  
Display method  
Number of pixels  
Tuner type  
Color TFT LCD  
1024 (Horizontal) x 768 (Vertical)  
F-Synth  
Receiving channels  
VHF: 2-13  
UHF: 14-69  
CATV: 1-125 (4A, A5~A1, A~I, J~W, W+1~W+84)  
VHF/UHF 75  
1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 x 2  
1.5W + 1.5W  
Antenna input  
Speaker  
Audio output power  
DVD/CD Player  
Signal system  
Applicable disc  
NTSC  
1. DVD (12cm, 8cm)  
2. CD (12cm, 8cm)  
1-Lens, 2-Beams System  
Pickup  
Input/Output  
S-Video input  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin x 1  
(C) 1.0 V (p-p), 75 Ω  
Component video input  
(Y) 1.0 V (p-p), 75 , negative sync., pin jack x 1  
(PB, PR) 0.7V (p-p), 75 , pin jack x 2  
1.0 V (p-p), 75 , negative sync., pin jack x 2  
8dBm, 50 k, negative sync., pin jack (L/R) x 2  
0.5 V (p-p), 75 , pin jack x 1  
Video input  
Audio input  
Digital audio output (Coaxial)  
Headphone  
ø3.5mm stereo mini jack x 1  
Accessories  
Remote control (DC-LB1) ................................................ 1  
Batteries (R03/AAA) ........................................................ 2  
AC adapter ...................................................................... 1  
AC cord (for AC adapter) ................................................. 1  
300-75 matching transformer ....................................... 1  
Owners manual (this booklet) ......................................... 1  
This model complies with the above specifications.  
Designs and specifications are subject to change without notice.  
This model may not be compatible with features and/or specifications that may be added in the future.  
57  
J5X00301A [E] (P53-57)  
57  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States Warranty  
LCD TV/DVD Combination - Depot Repair Warranty  
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original  
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL  
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A  
GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR  
TRANSFEREE.  
LCD TV/DVD COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE  
OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT  
COVERED BY THESE WARRANTIES.  
LCD TV/DVD COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,  
WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED  
BY THESE WARRANTIES.  
Limited One (1)Year Warranty on Parts and Labor  
TACP warrants this LCD TV/DVD Combination and  
its parts against defects in materials or workmanship  
for a period of one (1) year after the date of original  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO  
THE FOLLOWING CONDITIONS:  
retail purchase. DURING THIS PERIOD, TACP WILL, (1) You must retain your bill of sale or provide  
AT TACP'S OPTION, REPAIR OR REPLACE A  
DEFECTIVE PART WITH A NEW OR REFURBISHED  
PART WITHOUT CHARGE TO YOU.  
other proof of purchase.  
(2) All warranty servicing of this LCD TV/DVD  
Combination must be made by the Depot  
Warranty Repair Center specified by the TACP  
Consumer Solutions Center.  
Rental Units  
The warranty for LCD TV/DVD Combination rental  
units begins on the date of the first rental or thirty (30)  
days after the date of shipment to the rental firm,  
whichever comes first.  
(3) The warranties from TACP are effective only if  
the LCD TV/DVD Combination is purchased  
and operated in the Continental U.S.A. or  
Puerto Rico.  
Commercial Units  
LCD TV/DVD Combinations sold and used for  
commercial purposes have a limited warranty for all  
parts and labor, which warranty begins on the date of  
original retail purchase and ends on the date that is  
ninety (90) days thereafter.  
(4) Labor service charges for set installation,  
setup, adjustment of customer controls, and  
installation or repair of antenna systems are  
not covered by this warranty. Reception  
problems caused by inadequate antenna  
systems are your responsibility.  
Owner's Manual and Product Registration Card  
Read this owners manual thoroughly before operating  
this LCD TV/DVD Combination.  
(5) Warranties extend only to defects in materials  
or workmanship as limited above, and do not  
extend to any LCD TV/DVD Combination or  
parts that have been lost or discarded by you  
or to damage to the LCD TV/DVD Combination  
or parts caused by fires, misuse, accident, Acts  
of God (such as lightning or fluctuations in  
electric power), improper installation, improper  
maintenance, or use in violation of instructions  
furnished by TACP; use or malfunction through  
simultaneous use of this LCD TV/DVD  
Complete and mail the enclosed product registration  
card or register your LCD TV/DVD Combination on-  
possible. By registering your LCD TV/DVD  
Combination you will enable TACP to bring you new  
products specifically designed to meet your needs  
and help us to contact you in the unlikely event a  
safety notification is required under the U.S.  
Consumer Product Safety Act. Failure to complete  
and return the product registration card does not  
diminish your warranty rights.  
Combination and connected equipment; or to  
units that have been modified or had the serial  
number removed, altered, defaced, or rendered  
illegible.  
58  
J5X00301A [E] (P58-Back)  
58  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Obtain Warranty Services  
If, after following all of the operating instructions in  
this manual and checking the section  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS AND YOU MAY ALSO HAVE OTHER  
RIGHTS WHICH MAY VARY FROM STATE TO  
STATE IN THE U.S.A. SOME STATES OF THE  
U.S.A. DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, WHEN  
AN ACTION MAY BE BROUGHT, OR THE  
EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE  
ABOVE PROVISIONS MAY NOT APPLY TO YOU  
UNDER SUCH CIRCUMSTANCES.  
"Troubleshooting," you find that service is needed:  
(1) For instructions on how to obtain warranty  
service for your LCD TV/DVD Combination,  
contact TACP's Consumer Solution Center toll  
free at 1-800-631-3811.  
(2) You must include a copy or original bill of sale  
or other proof of purchase along with the entire  
LCD TV/DVD Combination to the Depot  
Warranty Repair Center specified by the TACP  
Consumer Solutions Center. You are  
responsible for all inbound transportation and  
insurance charges for the LCD TV/DVD  
Combination to the Depot Warranty Repair  
Center specified by the TACP Consumer  
Solutions Center.  
For additional information, visit TACP's website:  
ALL WARRANTIES IMPLIED BY THE LAW OF  
ANY STATE OF THE U.S.A.,  
INCLUDING THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE EXPRESSLY  
LIMITED TO THE DURATION OF THE LIMITED  
WARRANTIES SET FORTH ABOVE. WITH THE  
EXCEPTION OF ANY WARRANTIES IMPLIED BY  
THE LAW OF ANY STATE OF THE U.S.A. AS  
HEREBY LIMITED, THE FOREGOING  
WARRANTY IS EXCLUSIVE AND IN LIEU  
OF ALL OTHER WARRANTIES, GUARANTEES,  
AGREEMENTS, AND SIMILAR OBLIGATIONS OF  
TACP WITH RESPECT TO THE REPAIR OR  
REPLACEMENT OF ANY PARTS. IN NO EVENT  
SHALL TACP BE LIABLE FOR CONSEQUENTIAL  
OR INCIDENTAL DAMAGES (INCLUDING, BUT  
NOT LIMITED TO, LOST PROFITS, BUSINESS  
INTERRUPTION, OR MODIFICATION OR  
ERASURE OF RECORDED DATA CAUSED BY  
USE, MISUSE OR INABILITY TO USE THIS LCD  
TV/DVD COMBINATION).  
No person, agent, distributor, dealer, or company is  
authorized to change, modify, or extend the terms  
of these warranties in any manner whatsoever.  
The time within which an action must be  
commenced to enforce any obligation of TACP  
arising under the warranty or under any statute  
or law of the United States or any state thereof is  
hereby limited to ninety (90) days from the date  
you discover, or should have discovered, the  
defect. This limitation does not apply to implied  
warranties arising under state law.  
59  
J5X00301A [E] (P58-Back)  
59  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ColorStream® is a registered trademark of Toshiba America Consumer Products, L.L.C.  
is a trademark of Toshiba America Consumer Products, L.L.C.  
N
J5X00301A SH 06/04  
Printed in Thailand  
J5X00301A [E] (P58-Back)  
60  
16/3/06, 3:58 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

TC electronic SDN BHD Network Card DVR2 User Manual
TDK Power Supply FPS1000 12 User Manual
TOA Electronics DVR C DR161 CU Series User Manual
Toshiba DVD Player SD K740SU User Manual
Toshiba Scanner GA 1201 User Manual
Transcend Information Network Card TS0MFLRD8B User Manual
Tripp Lite Network Cables P940 19I User Manual
Vandersteen Audio Portable Speaker VSM 1 User Manual
Vanguard Managed Solutions Outdoor Fireplace MBDV37 User Manual
Vivotek Digital Camera IP3112 User Manual