Toshiba Digital Camera IK 65WDA User Manual

INSTRUCTION MANUAL  
CCD COLOR CAMERA  
IK-65WDA  
Please read this manual thoroughly before use,  
and keep it handy for future reference.  
Record in space provided below the Model No. and  
the Serial No. as found on the bottom of this unit.  
Model No. IK-65WDA Serial No. ____________  
Retain this information for future reference.  
TABLE OF CONTENTS  
Important Safeguards  
1. Features & Description·······································································4  
2. Cautions ······························································································4  
3. Components························································································4  
4. Part Name & Functions ······································································5  
5. Connections and Operations ·····························································6  
6. Line-Lock Phase ··················································································9  
7. DIP Switch Settings ············································································9  
8
Menu-Driven set-up··········································································11  
9. Remote Control·················································································26  
10. Note on Use and Installation ···························································27  
11. In Case of Problems ·········································································28  
12. Specifications····················································································29  
13. Exterior View·····················································································30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The CAUTION label, shown on the left, is  
attached on the bottom of camera.  
The lightening flash with arrowhead symbol, within an equilateral triangle,  
is intended to alert the user to the presence of uninsulated "dangerous  
voltage" within the product's enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert  
the user to the presence of important operating and maintenance  
(servicing) instructions in the literature accompanying the appliance.  
WARNING:  
CAUTION  
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPLIANCE TO RAIN  
OR MOISTURE.  
CONNECT 24V AC UL LISTED  
CLASS 2 POWER SUPPLY.  
FIELD INSTALLATION MARKING:  
WORDED : ”THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE  
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”  
Note : The camera is indoor used  
INFORMATION  
This equipment has been tested and found to comply with the limits for a Class A  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference when the equipment is  
operated in a commercial environment. This equipment generates, uses , and can  
radiate radio frequency energy and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio communications.  
Operation of this equipmetn in a residential area is likely to cause harmful interference  
in which case the user will be required to correct the interference at his own expense.  
USER-INSTALLER CAUTION :Your authority to operate this FCC verified equipment  
could be voided if you make changes or modifications not expressly approved by the  
party.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.FEATURES & DESCRIPTION :  
(1) IK-65WDA has the following functions.  
(1)133 Times Dynamic Range  
Toshiba developed algorithms that enable industry leading dynamic range  
(2)Digital Noise Reduction (“DNR”)  
Exclusive 3 Dimensional Digital Noise Reduction boosts S/N ratio to a incredible 53dB  
(3)0.001Lux @ 1.2Minimum Illumination in slow shutter mode  
User-definable Sensitivity levels ensure best image quality reproduction dependent  
on available lighting conditions  
(4)User-Definable DAY/NIGHT Threshold  
Customize the color to black & white conversion level according to your application  
needs  
(5)MENU-DRIVEN Programming  
(6)Remote control from a keyboard etc, by RS422.  
(7)Up to 1/100,000 sec shutter speed  
(8)520 horizontal TV lines in HI-RESO mode  
(9)Easy installation into any AC 24V~/DC 12V system  
2.CAUTIONS :  
(1)In order to protect the camera, avoid placing or using it under direct sunlight, rain or  
dust.  
(2)Avoid touching the CCD sensor with your fingers. If necessary, use a soft cloth moist-  
ened with alcohol to wipe off any dust.  
(3)When the camera is not in use, keep the lens or lens cap attached to protect the CCD  
sensor.  
(4)Avoid aiming the camera at the sun.  
(5)Avoid shooting the camera at intense light. Intense light such as a spotlight may cause  
a bloom or smear. A vertical stripe may appear on the screen. However, this is not a  
malfunction.  
(6)Install the camera away from video noise. If cables are wired near electric lighting  
wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall  
equipment.  
3.COMPONENTS :  
(1)Camera  
1
(2)Accessories  
(a) Lens Connector  
(b) Instruction Manual  
(c) Lens Cap  
1
1
1
(E4-191J-100(M))  
(d) Lens, coaxial cable and power cord are not supplied with camera.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.PART NAMES & FUNCTIONS :  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.CONNECTIONS AND OPERATIONS :  
Notes on connecting  
Power plugs of connected equipment must be disconnected before installations.  
A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection.  
For details of wiring and operation of equipment to be connected, refer to their  
operation manuals.  
Lenses, coaxial cables for video signals and the power cord are not supplied with  
the camera.  
Refer to the operations manuals of connected equipment for detailed wiring and  
overall operation instructions.  
5.1 Basic connection for a single system configuration  
Rx  
Rx  
Keyboard  
CAUTION: Never input 24V AC and 12V DC at the same time.  
Do not overload power supply  
Since this camera uses 24V AC UL Listed Class 2 power supply or 12V DC power  
supply, it should be connected to a power supply that allows for at least 7w con-  
sumption.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2 Line-Lock Control  
Matching the vertical synchronization with the power frequency is called the Line-Lock.  
This function is activated when the LINE LOCK switch is selected to ON.  
When two or more cameras are switched by the video switcher for viewing by a moni-  
tor TV, the vertical sync. Phase can be locked with the power frequency, and a stable  
vertical sync. Is obtained without being disturbed at the time of switching.  
Note:  
• The camera is synchronized to the power frequency of 60 1Hz covering a  
normal fluctuation of the power frequency. However, the camera may not  
cover a large fluctuation caused from the power generated by an engine  
generator, etc.  
• It takes about 10 seconds or more until a stable synchronization is obtained  
after the power is turned on. This is normal, because several seconds are  
required to stabilize the camera against power noise.  
• Refer to "6.LINE-LOCK PHASE" for adjustment.  
5.3 Operation  
(1)Before mounting a lens, check whether it is a "C" mount or "CS" mount type lens. If a  
"C" mount lens is used, an adapter ring is required and the back focus will need to be  
adjusted.  
(2)Mount the lens on the camera by turning the lens clockwise. Adjust the diaphragm and  
focus for optimum image.  
(3)Connect the VIDEO output to the video monitor. The picture will appear on the moni-  
tor screen as the power is supplied to the camera.  
(4)Adjust the focus and aperture of the lens for best image quality.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.4 Back focus adjustment:  
Back focus is adjusted at the factory to accom-  
modate most standard lenses. If a slight adjust-  
ment is needed, mount the lens to the camera  
first. Then loosen the Focus Lock Screw. Rotate  
the Focus ring until a clear image is achieved.  
Retighten the Focus Lock Screw.  
NOTE  
• When the lens weight is more than 2.2 lbs., support the camera on the lens  
side rather than relying on the tripod mount of the camera.  
5.5 Lens  
This camera supports DC (direct drive) type of  
auto-iris lens:  
Connect the auto-iris connector plug to the IRIS  
terminal on the side of the camera. Refer to the  
cart below for correct wiring and set up.  
Change the IRIS switch (DIP SWITCH SETTINGS  
on rear panel) to select DC.  
Direct Drive  
IRIS Lens  
1. Damp-(y)  
IRIS  
2. Damp+(r)  
terminal  
pin  
3. Driver+(wh)  
4. Driver-(g)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.LINE-LOCK PHASE :  
When a video switcher switches two or more  
cameras, the picture may fluctuate on the video  
monitor due to the different AC line phase of  
each camera. In this case, adjust the V PHASE  
controller (on rear panel) to get a stable image.  
The camera is in the Line-Lock Mode. Line-Lock  
phase is set 0-300 degrees by adjusting the V  
phase control at the rear of the camera.  
V. PHASE CONTROLLER  
7.DIP SWITCH SETTINGS :  
The following settings can be performed by setting the rear dip switches.  
7.1 LINE LOCK (DIP1) : ON/OFF  
The line lock functions with AC24V power and  
the switch on the ON side.  
7.2 IRIS (DIP2) : AES/DC  
AES/DC select switch.  
AES (ON side) : Auto electronic shutter function.  
DC (OFF side) : When using AI lens without amp.  
7.3 WDR (DIP3) : ON/OFF  
With this switch ON, wide dynamic range func-  
tion (WDR) is activated.  
When WDR function is activated, the video of  
each Field is mixed. When this happens, verti-  
cal resolution And the number of the frames  
decrease slightly.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.4 DN (DIP4) : MID/S.DNx32  
DN mode select switch.  
MID (ON side) :  
In low light conditions the IK-65WDA automatically cuts the chroma signal and boots  
the gain up of the luminance by 6dB.  
S.DN×32 (OFF side) :  
Under the low light condition, the IK-65WDA automatically activates the slow shutter  
function.  
FACTORY SETTINGS  
LINE LOCK : ON  
IRIS  
WDR  
DN  
: DC  
: OFF  
: S.DN×32  
NOTE  
• When you change DIP 2, 3 or 4 then the present settings are displayed for  
about 2 seconds on the upper left side of the screen.  
• When the on screen menu (“OSD”) is displayed and DIP 3, 4 is changed, then  
the present settings are stored and the OSD ends.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.MENU DRIVEN SET-UP :  
The following is the on-screen menu (OSD) structure for all settings and adjustments  
of the camera.  
RS422 setting menu  
ADDRESS  
PROTOCOL  
BIT-RATE  
VERSION  
EXIT  
001~255  
MENU  
TOSHIBA-P  
TOSHIBA-D  
1200  
2400 4800 9600  
****************  
DEFAULT  
MAIN menu (Except for DIP3 and DIP4 ON)  
ALC  
BLC  
99~99  
OFF  
AUTO  
UPPER2/3  
LOWER2/3  
SIDE1/6  
CENTER1/3  
CENTER1/6  
GAIN  
STD  
HIGH  
MENU  
****************  
ID.  
IDPOS  
OFF  
TOP  
BOTTOM  
EXIT  
CANCEL  
DEFAULT  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED MAIN menu (DIP3 and DIP4 ON)  
SHUTTER  
NO-D/N  
D/N  
LOW  
x128  
MID  
x64  
HIGH  
x32  
S. D/N  
x16  
x1  
x8  
x4  
x2  
WDR  
ALC  
BLC  
OFF  
ON  
99~99  
OFF  
AUTO  
UPPER2/3  
LOWER2/3  
CENTER1/3  
CENTER1/6 SIDE1/6  
GAIN  
OFF  
STD  
MID  
HIGH  
HIGH  
SHARPNESS  
WHITE BAL  
LOW  
MENU  
AUTO:  
20~20  
R:  
99~99  
B:  
99~99  
INDOOR1  
INDOOR2  
OUTDOOR  
...........  
ID.  
ID. POS  
PTN-GEN  
AWB-RNG  
DNR  
OFF  
OFF  
STD  
LOW  
OFF  
TOP  
BOTTOM  
COLOR  
WIDE  
HIGH  
ON  
STEP  
GRID  
MULTI  
SUPER  
HI-RESO  
EXIT  
CANCEL  
DEFAULT  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.1 Setting switches and the functions  
On the side panel of the cameras there are three push button switches as shown below:  
Switch name  
Main function  
Select  
Setting mode call on/off, setting entry  
Setting item selection (down)  
Setting item selection (up)  
8.2 On Screen MAIN menu (Except for DIP3 and DIP4 ON)  
The camera is adjusted using the On Screen  
Menu.  
Displays the present state  
of the rear switches.  
Press and hold the select switch on the side  
of the camera body 2 seconds until the menu  
appears on the monitor. The shaded area  
represents the option to be set.  
(Displayed when both DIP3 and DIP4 on the  
rear are not set to ON).  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
* * *  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * * * *  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
E X I T CANC E L D E F AU L T  
(1) WDR = Wide dynamic range function  
Displays the rear switch status of the switch (DIP 3).  
(2) D/N = DAY/NIGHT function  
Displays the rear switch status of the switch (DIP 4).  
(3) ALC = Automatic level control  
WDR  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
D / N  
A L C  
B L C  
Move the cursor to the position shown in fig.  
Use the ꢀ ꢁ SELECT switches to adjust the  
ALC level to reach the desired luminosity.  
* * * * *  
GA I N  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
E X I T CANC E L D E F AU L T  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(4) BLC = Back light compensation  
Move the cursor to the position in Fig.  
Use the SELECT switches to select  
OFF, AUTO, UPPER2/3, LOWER2/3, CENTER1/  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
3, CENTER1/6, LOWER1/6  
Using in AES or auto iris lens, the exposure  
adjustment is automatically controlled so that  
the best picture is obtained at next monitor  
zone. This function is effective when strong  
light enters and auto iris lens closes.  
OFF:The camera is not in BLC mode.  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
E X I T CANC E L D E F AU L T  
The area size is approximately the following:  
(Appropriately maintain the shaded area of the video level)  
OFF  
UPPER 2/3  
LOWER 2/3  
3
1
2
1
3
V
V
2
3
V
V
2
3
1
3
CENTER 1/3  
CENTER 1/6  
SIDE 1/6  
6
4
5
1
3
1
1
V
V
V
V
V
3
3
1
3
1
3
1
3
V
V
V
V
1
3
1
3
1
3
1
3
1
3
1
3
1
4
1
2
1
4
1
4
1
2
1
4
H
H
H
H
H
H
H
H
H
AUTO  
7
Depending on the subject conditions, areas 1 to 6 can be combined.  
NOTE  
• The camera automatically decides which areas are dark in AUTO mode, and  
the brightness for these areas are adjusted to their optimum levels. Conse-  
quently, the bright parts of the image may be affected may be affected.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(5) GAIN = AGC gain setting  
Move the cursor to the position in Fig.  
Use the SELECT switches to select OFF, STD,  
HIGH.  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
OFF  
STD  
:
:
AGC does not operate.  
Standard position, max gain = 24dB  
S T D  
I D  
.
HIGH : High-Sensitivity position, max gain  
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
= 30dB  
(If there is noise in low light condi-  
tions, set to STD.)  
E X I T CANC E L D E F AU L T  
NOTE  
• If the SHUTTER settings are set to S.D/N (excluding X1), then OFF cannot be  
set.  
(6) ID. = Camera ID.  
Move the cursor to the position shown in fig.  
Use the SELECT switches to name each cam-  
era up to 20 characters.  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
Font list  
0,1,2,3,4,5,6,7,8,9  
A,B,C,D,E,F,G,H, I ,J,K,L,M  
N,O,P,Q,R,S,T,U,V,W,X,Y,Z  
. , : ?+x / &<> ( ) · (SPACE)  
* * * * *  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
E X I T CANC E L D E F AU L T  
(7) ID. POS = Camera ID. Position  
Move the cursor to the position shown in fig.  
Use the SELECT switches to select OFF, TOP,  
BOTTOM. Show the Camera ID in monitor  
screen.  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
S T D  
OFF  
TOP  
: The camera ID is not displayed  
: The camera ID is displayed at the  
top-left of the monitor  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
BOTTOM : The camera ID is displayed at the  
bottom-left of the monitor.  
E X I T CANC E L D E F AU L T  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(8) CANCEL  
Move the cursor to the position in fig.  
Press the SELECT switch to exit the menu  
without saving and changes.  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
E X I T CANC E L D E F AU L T  
(9) EXIT  
Move the cursor to the position in fig.  
Press the SELECT switch when SAVE ALL  
SETTING (excluding WDR, D/N settings) is  
displayed to save all changes and exit the  
menu.  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
E X I T CANC E L D E F AU L T  
(10) DEFAULT  
Move the cursor to the position in fig.  
Press the SELECT switch to select DEFAULT,  
which returns the camera to its factory set-  
tings.  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
S T D  
Default settings  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
WDR  
D / N  
A L C  
B L C  
GA I N  
- CHG D I P SW  
- CHG D I P SW  
L E V : 0 0  
AU TO  
* * *  
* * * * *  
E X I T CANC E L D E F AU L T  
S T D  
I D  
.
. . . . . . . . . . . . . . . . . . . .  
I D - P O S O F F  
NOTE  
• The ADVANCED MAIN menu contents change to the default settings.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.3 On Screen ADVANCED MAIN menu (DIP3 and DIP4 ON)  
The camera is adjusted using the On Screen  
Menu.  
Press and hold the select switch on the side  
of the camera body 2 seconds until the menu  
appears on the monitor. The shaded area rep-  
resents the option to be set.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
(Displayed when both DIP3 and DIP4 on the  
rear are set to ON.)  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
(1) SHUTTER  
Move the cursor to the position in fig.  
Use the SELECT switches to select NO-D/N,  
D/N, S.D/N.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
NO-D/N (NO DAY/NIGHT FUNCTION) :  
Exposure time is fixed at 1/60 sec.  
The control of the luminosity is done with  
the DC Lens.  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
D/N (DAY/NIGHT function) :  
E X I T CANC E L D E F AU L T  
In low light conditions the IK-65WDA auto-  
matically cuts the chroma signal level and  
boosts the gain up of the luminance by 6dB.  
a. LOW : The chroma cut level is set less than 20 to 30IRE.  
b. MID The chroma cut level is set less than 30 to 40 IRE.  
:
c. HIGH : The chroma cut level is set less than 40 to 50 IRE.  
HIGHis for a brighter setting than LOW”  
S.D/N (SUPER DAY/NIGHT FUNCTION) :  
Under the low light condition, the IK-65WDA automatically activates the slow shutter  
function.  
Practical Application  
IRIS (DIP2) : DC  
SHUTTER MODE  
NO-D/N  
LENS TYPE  
Auto iris  
SHUTTER  
1/60  
D/N  
S.D/N  
Auto iris+(6 dB gain up)  
Auto iris  
1/60  
X128 - 1/60  
IRIS (DIP2) : AES  
SHUTTER MODE  
NO-D/N  
LENS TYPE  
Fixed iris  
Fixed iris+(6 dB gain up)  
Fixed iris  
SHUTTER  
1/60 - 1/10K  
1/60 - 1/10K  
X128 - 1/10K  
D/N  
S.D/N  
A DC lens opens when AES mode is chosen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
(2) WDR = Wide dynamic range function  
Move the cursor to the position shown in fig.  
Use the  
or ON in the WDR setting.  
When WDR is set to ON, WDR activates au-  
tomatically.  
When WDR function is activated, the video  
of each field is mixed. When this happens,  
vertical resolution and the number of the  
frames decrease slightly.  
SELECT switches to select OFF  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
(3) ALC = Automatic level control  
Refer to 8.2 (3).  
(4) BLC = Back light compensation  
Refer to 8.2 (4).  
(5) GAIN = AGC gain setting  
Refer to 8.2 (5).  
(6) SHARPNESS  
Move the cursor to the position shown in fig.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
Use the  
SELECT switches to select LOW,  
MID, High in the SHARPNESS setting.  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(7) WHITE BAL (WHITE BALANCE)  
Move the cursor to the position shown in fig.  
Use the  
SELECT switches to select  
S HU T T E R  
WDR  
D / N : M I D  
ON  
AUTO, MANUAL in the WHITE BAL settings.  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
AUTO : The white balance is automatically  
adjusted corresponding to the color  
temperature variations on the ob-  
ject. The camera is applicable to a  
color temperature range of 2500-  
10K. Press the SELECT switch to  
enter AUTO set mode. Use the  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
SELECT switches to adjust the shift  
value of the convergence point.  
When data becomes big in the positive side, a convergence point is altered in  
the red side. When data becomes big in the negative side, a convergence point is  
altered in the blue side.  
MANUAL : Press the SELECT switch to enter the MANUAL SETTINGS. Use the  
SELECT switches to adjust R Gain (Red) and B Gain (Blue) until the desired  
white balance is reached. Press SELECT to exit the manual settings.  
INDOOR1 : Optimum setting for the white balance when the color temperature is 3000K  
indoors with an incandescent lamp.  
INDOOR2 : Optimum setting for the white balance when the color temperature is 4000K  
indoors with a fluorescent lamp.  
OUTDOOR: Optimum setting for the white balance when the color temperature is 5200K  
in an outside environment.  
NOTES  
• If the optimum white balance cannot be obtained, then try to set AWB-RNG  
to WIDE. (Refer to 8.3 (11).)  
(8) ID. = Camera ID.  
Refer to 8.2 (6).  
(9) ID. POS = Camera ID. Position  
Refer to 8.2 (7).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(10) PTN-GEN = Test pattern generator  
Move the cursor to the position shown in fig.  
I D  
. . . . . . . . . . . . . . . . . . . .  
Use the ꢀ ꢁ SELECT switches to select OFF,  
COLOR, STEP, GRID, MULTI.  
I D -  
O F F  
O F F  
S T D  
LOW  
O F F  
P O S  
P T N  
- GE N  
AWB -  
DNR  
RNG  
OFF  
: Test pattern is not displayed.  
COLOR : Color bar signal is displayed.  
H I - R E S O  
STEP  
GRID  
: Gray step signal is displayed.  
: Grid pattern signal is displayed.  
B ACK  
MULTI : A simple multi-burst signal is out-  
put.  
E X I T CANC E L D E F AU L T  
COLOR  
STEP  
GRID  
MULTI  
NOTE  
• The accuracy of the signal is not guaranteed.  
• To check the system operation etc., use a standard signal source.  
(11) AWB-RNG = AWB control range  
Move the cursor to the position shown in fig.  
Use the st ꢀ ꢁ SELECT switches to select  
STD or WIDE in the AWB-RNG setting.  
Set the color temperature tracking range of  
the white balance auto mode.  
I D  
. . . . . . . . . . . . . . . . . . . .  
I D -  
O F F  
O F F  
S T D  
LOW  
O F F  
P O S  
P T N  
- GE N  
AWB -  
DNR  
RNG  
STD  
:
The camera is applicable to a color  
tempera true range of 2500-10k  
Wider than the STD settings.  
H I - R E S O  
WIDE :  
B ACK  
E X I T CANC E L D E F AU L T  
NOTE  
• When switching from WIDE to STD setting, turn off and on the camera to  
clear the setting.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(12) DNR = Digital noise reduction  
Move the cursor to the position shown in fig.  
Use the ꢀ ꢁ SELECT switches to select LOW,  
HIGH, SUPER.  
I D  
. . . . . . . . . . . . . . . . . . . .  
I D - P O S  
P T N - GE N  
AWB - RNG  
DNR  
O F F  
O F F  
S T D  
LOW  
O F F  
LOW  
HIGH  
: Standard position.  
: Increase the effect of DNR.  
SUPER : Further increase the effect of DNR.  
H I - R E S O  
NOTE  
B ACK  
• If you set HIGH or SUPER the noise  
reduction effect is reduced but an  
after-image is produced if a moving  
subject is shot.  
E X I T CANC E L D E F AU L T  
(13) HI-RESO = Hi resolution  
Move the cursor to the position shown in fig.  
Use the ꢀ ꢁ SELECT switches to select OFF  
or ON in the HI-RESO setting.  
I D  
. . . . . . . . . . . . . . . . . . . .  
I D - P O S  
P T N - GE N  
AWB - RNG  
DNR  
O F F  
O F F  
S T D  
LOW  
O F F  
OFF : Standard position.  
Resolution of horizontal is 480TV lines  
or more.  
ON : Hi resolution function is activated.  
Resolution of horizontal is 520 TV  
lines.  
H I - R E S O  
B ACK  
E X I T CANC E L D E F AU L T  
NOTE  
• If you set HI-RESO to ON, the image signal resolution is increased, but de-  
pending on the subject, noise may be increased.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(14) NEXT, BACK  
Move the cursor to the position in fig.  
Press the SELECT switch, to select the last  
page or next page.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
I D  
. . . . . . . . . . . . . . . . . . . .  
I D - P O S  
P T N - GE N  
AWB - RNG  
DNR  
O F F  
O F F  
S T D  
LOW  
O F F  
H I - R E S O  
B ACK  
E X I T CANC E L D E F AU L T  
(15) CANCEL  
Move the cursor to the position in fig.  
Press the SELECT switch to exit the menu  
without saving any changes.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(16) EXIT  
Move the cursor to the position in fig.  
Press the SELECT switch when SAVE ALL  
SETTINGS is displayed to save all changes  
and exit the menu.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
N E X T  
E X I T CANC E L D E F AU L T  
(17) DEFAULT  
Move the cursor to the position in Fig.  
Press the SELECT switch to select DEFAULT,  
which returns the camera to its factory set-  
tings.  
S HU T T E R  
WDR  
D / N : M I D  
ON  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
Default settings  
WH I T E - B A L AU TO : 0 0  
S HU T T E R  
WDR  
D / N : M I D  
ON  
N E X T  
E X I T CANC E L D E F AU L T  
A L C  
L E V : 0 0  
AU TO  
B L C  
GA I N  
S T D  
S HAR P N E S S M I D  
WH I T E - B A L AU TO : 0 0  
I D  
. . . . . . . . . . . . . . . . . . . .  
I D - P O S  
P T N - GE N  
AWB - RNG  
DNR  
O F F  
O F F  
S T D  
LOW  
O F F  
H I - R E S O  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.4 On Screen RS422 setting menu (FOR REMOTE CONTROL)  
The camera is adjusted using a sub menu for setup using a remote control.  
Press and hold the  
switch on the side of the camera body 2 seconds until the menu  
appears on the monitor. The blinking area represents the option to be set.  
(This sub menu cannot control from a keyboard by RS-422)  
Default settings  
ADDR E S S  
P ROTOCOL  
B I T - RA T E  
0 0 1  
TO S H I B A - P  
4 8 0 0  
(1) ADDRESS  
Move the cursor to the position in Fig.  
ADDR E S S  
0 0 1  
Use the SELECT  
to 255.  
In RS-422 control, it is necessary to set a  
unique camera address for each camera.  
switches to select 001  
P ROTOCOL TO S H I B A - P  
B I T - RA T E 4 8 0 0  
V E R S I ON  
* * * *  
E X I T D E F AU L T  
(2) PROTOCOL  
Move the cursor to the position in Fig.  
ADDR E S S  
0 0 1  
Use the SELECT switches to select  
TOSHIBA-P, TOSHIBA-D.  
P ROTOCOL TO S H I B A - P  
B I T - RA T E 4 8 0 0  
V E R S I ON  
* * * *  
E X I T D E F AU L T  
(3) BIT-RATE  
Move the cursor to the position in Fig.  
ADDR E S S  
0 0 1  
P ROTOCOL TO S H I B A - P  
B I T - RA T E 4 8 0 0  
Use the SELECT switches to select 1200,  
2400, 4800, 9600bps.  
In RS-422 control, the bit rate for each cam-  
era should match the controller or keyboard.  
E X I T D E F AU L T  
(4) VERSION  
Software version display.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.REMOTE CONTROL :  
RS-422 Control (Factory-setting) supported TOSHIBA-P and TOSHIBA-D.  
Rx Rx G  
Twisted pair line  
Camera  
terminal  
Rx-  
Tx-  
Tx+  
2 wires  
Control  
Rx+  
Tx of the communication line from KBD is connected to Rx of the camera, and Tx-is con-  
nected to Rx-of the camera.  
A controllable function is as follows.  
Preset Number / Key Function  
(TILT) Valid when the OSD menu is displayed  
(PAN) Valid when the OSD menu is displayed  
(TILT) Valid when the OSD menu is displayed  
(PAN) Valid when the OSD menu is displayed  
Function  
The same operation as when a ꢀ  
button has been pressed  
The same operation as when a ꢁ  
button has been pressed  
The same operation as when a ꢁ  
button has been pressed  
The same operation as when a ꢀ  
button has been pressed  
The same operation as when a  
SELECT button has been pressed  
Valid when the OSD menu is displayed  
IRIS Open  
Valid when the OSD menu is not displayed ALC setting +1  
IRIS Close Valid when the OSD menu is not displayed  
ALC setting -1  
71 GO  
72 GO  
75 GO  
Backlight compensation AUTO  
Backlight compensation OFF  
Software version display  
SHUTTER NO-D/N  
88 GO  
89 GO  
8 7 GO  
95 SET  
Valid during ADVANCED mode  
Valid during ADVANCED mode  
Valid during ADVANCED mode  
SHUTTER D/N  
SHUTTER S..D/N  
Enter MENU mode  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10.  
NOTES ON USE AND INSTALLATION :  
• Do not aim the camera at the sun  
Do not aim the camera at the sun or point it at sun even if you are not shooting.  
• Do not shoot intense light  
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may  
appear on the screen. However, this is not a malfunction.  
• Treat the camera with care  
Do not drop the camera or subject it to strong shock of vibration. Otherwise, the  
camera may malfunction.  
• Never touth internal parts  
Do not touch the internal parts of the camera other than the parts specified.  
Otherwise, the camera may malfunction.  
• Do not splash water on the camera  
Install the camera where the camera can be kept dry. If the camera gets wet, turn off  
the power and contact your dealer.  
• Install the camera  
Where no video noise appears.  
If cables are wired near electric lighting wires or a TV set, noise may appear in  
images. In this event, relocate cables or reinstall equipment.  
• Check the ambient temperature and humidity  
Avoid using the camera where the temperature is hotter or colder than specified.  
Otherwise, the quality of images may deteriorate or internal parts may be affected.  
Special care is required to use the camera at high temperature and humidity.  
• Should you notice any trouble  
If any trouble occurs while you are using the camera, turn off the power and con-  
tact your dealer. If you continue to use the camera when there is something wrong  
with it, the trouble may much worse and an unpredictable accident may occur.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11.  
IN CASE OF PROBLEMS :  
Condition  
Check Points  
Are the camera and connected equipment turned on?  
Is the iris of the lens adjusted properly?  
Are cables connected correctly?  
No image  
Is the monitor TV adjusted correctly?  
Is the lighting too weak?  
Unnatural color  
Press default to return the camera to factory settings (8.2.(10))  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12.  
SPECIFICATIONS :  
Power  
AC 24V ~ 10% 60Hz/DC 12V  
6.0W with AI lens  
10%  
Power consumption  
Image sensor  
1/3 inch CCD image area sensor  
Image pickup area  
5.59mm (0.220inch) horizontal x 4.68mm  
(0.184inch) vertical (1/3inch type)  
Effective picture element  
Scanning system  
Scanning frequency  
Synchronization  
Resolution  
768 horizontal x 494 vertical  
2 : 1 interlace NTSC Standard TV system  
15.75kHz horizontal 60Hz vertical  
Line-Lock, Internal manually switchable  
Horizontal 520 TV lines or more  
Vertical 350 TV lines or more (WDR OFF, HI-RESO ON)  
Horizontal 520 TV lines  
Vertical 260 TV lines or more (WDR ON, HI-RESO ON,  
slow shutter)  
Minimum illuminance of subject  
S/N  
0.1 Lux (F1.2, AGC HIGH, More than 10% of image  
output γ=0.45)  
0.001 Lux (F1.2, x 128, AGC HIGH, More than 10% of  
image output γ=0.45)  
53dB or more (AGC OFF, WDR OFF, weight ON)  
50dB or more (AGC OFF, WDR ON, weight ON)  
Video output  
VBS 1.0V p-p/75 ohms, composite  
Output impedance  
White balance  
75unbalanced  
AUTO (2500K to 10,000K), MANUAL, INDOOR1,  
INDOOR2, OUTDOOR  
IRIS control  
DC Iris Driver Circuit Built in  
Average AGC-STD (24dB), HIGH (30dB)  
6 mode BLC function  
Gain control  
Backlight compensation  
Dynamic range  
Wide dynamic range function  
CS mount  
Lens mount  
Ambient temperature  
Ambient humidity  
Weight  
-10˚C to +50˚C (14˚F to 122˚F)  
30% to 90%  
500g  
External dimensions  
Automatic electronic shutter  
Sens-up limit (slow shutter)  
2.74(W) x 1.97(H) x 4.56(D) inches (63x50x116mm)  
ON (1/60s to 1/100000)/OFF (1/60s)  
OFF/x2, x4, x8, x16, x32, x64, x128  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13.  
EXTERIOR VIEW :  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tektronix Car Satellite TV System TSG 100 User Manual
Toastmaster Oven XO 1STM User Manual
Toro Water System 220 03 User Manual
Toshiba Computer Hardware PA5037U1M4G User Manual
Toyota Automobile 2009 Land Cruiser User Manual
Trek Bicycle 6i User Manual
Uniden Answering Machine DECT3181 User Manual
Vanguard Heating Electric Heater VMH3000TPA User Manual
Vizio Flat Panel Television E280i B1 User Manual
Wayne Water Pump T100S10 2 User Manual