Toshiba DVD VCR Combo D VR3SU User Manual

DVD RECORDER-VCR

D-VR3SU

OWNER’S MANUAL

Read this booklet first.

I /

DUBBING

ON/STANDBY

TO DVD TO VCR

2004 Toshiba Corporation

Download from Www.Somanuals.com. All Manuals Search And Download.

• Toshiba does not compensate for contents which were

not recorded/edited because of some malfunctions of

this product or discs during operation, and is not

liable for incidental damages (such as profit loss or

interruption in business, etc.) produced by such con-

ditions.

ADDITIONAL SAFETY INSTRUCTIONS

Maintenance of Cabinet

Disc Storage

For safety reasons, be sure to disconnect the power cord

from the wall outlet.

• Do not use benzene, thinner, or other solvents for

cleaning.

15) When you use headphones, keep the volume at a mod-

erate level. If you use the headphones continuously with

high volume sound, it may cause hearing damage.

16) Do not overload wall outlets : extension cords, or inte-

gral convenience receptacles as this can result in a risk

of fire or electric shock.

17) Apparatus should not be exposed to dripping or splash-

ing and no objects filled with liquids, such as vases,

should be placed on the apparatus.

18) Keep your fingers well clear of the disc tray as it is clos-

ing. Neglecting to do so may cause serious personal

injury.

19) Do not place a heavy object on or step on the apparatus.

The object may fall, causing serious personal injury and

serious damage to the apparatus.

Be careful not to harm the disc because the data on these

discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Wipe the cabinet with a soft cloth.

• Store vertically.

• Keep in a clean protection jacket.

Power Outage

• If you move your DVD Recorder-VCR suddenly from a

cold place to a warm place, condensation may gener-

ate on the operating parts and lens and cause abnor-

mal disc playback. If this occurs, remove the disc and

wait for one to two hours with the power on before

attempting playback.

Disc Handling

• After a power outage the clock display will flash. Set

the clock to the correct time.

• Use discs with regular shapes.

If an irregular disc (a disc

with a special shape) is used,

this DVD Recorder-VCR may

be damaged.

Notes on copyright

• It is prohibited law to copy, broadcast, show, broadcast

on cable, play in public, and rent copyrighted material

without permission.

Notes on recording and editing

Holding discs

• Some DVD video discs are copy protected,and any

recordings made from these discs will be distorted.

• This product incorporates copyright protection tech-

nology that is protected by method claims of certain

U.S, patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse engineering of disassembly is

prohibited.

• When you record/edit important content, make trial

operations beforehand to confirm the recorder can

function properly.

Toshiba does not compensate for content which was

not recorded/edited because of some malfunction of

this product or discs during operation, and is not

liable for incidental damages (such as profit loss or

interruption of business, etc.) produced in such condi-

tions.

• When the power cord is disconnected or when a

power failure occurs during any operation of this

product, all contents recorded in this recorder may be

erased.

• Depending on the channel or program, an excessive

sound. Adjust the initial setting of the recording level

when necessary.

20) Do not place the apparatus on amplifiers or equipment

that may produce heat.

21) Do not cover the ventilating holes for the inside cooling

fan.

22) Do not use a cracked, deformed, or repaired disc. These

discs are easily broken and may cause serious personal

injury and apparatus malfunction.

23) If the apparatus should smoke or smell, immediately

disconnect the power cord from the wall outlet. Wait

until the smoke or smell stops, then ask your dealer for

a check and repair. Neglecting to do so may cause fire.

24) While it is thundering, do not touch the connecting

cables or the apparatus.

• Avoid touching the surface of a disc

where recording is performed.

Cartridge

• This is used to prevent damage by dirt, scratches, etc.

when using a DVD-RAM/RW/R disc.

DVD-RAM, DVD-RW and DVD-R

• This unit incorporates CPRM (Content Protection for

Recording Media) technology for copyright protection.

Recording and copying on this recorder depend on the

contents as described next page.

• Clean with an optional DVD-RAM/PD

disc cleaner. Do not use cleaners or

cloths for CDs to clean DVDRAM/

DVD-RW/DVD-R discs.

25) The apparatus includes lead, an ingredient of solder

human and the environment. When disposing of this

apparatus, follow the rules and regulations in your area.

• If a program you have set a timer recording includes

copy restriction signals, it may not be recorded. When

programming a recording, confirm that a program you

want to record is not copy-restricted.

VCR Plus+ and PlusCode are registered trademarks

of Gemstar Development Corporation. The VCR

Plus+ system is manufatured under license from

Gemstar Development Corporation.

Handling Cautions

DVD-Video, CD

• Wipe off dirt or contamination on the disc with a soft

cloth.

• Before connecting other components to this recorder, be

sure to turn them all off.

• Do not move the recorder while a disc is being played, or

the disc may be scratched or broken, and the recorder’s

internal parts may be damaged.

Exemptions

• Toshiba is not liable for any damage caused by fires,

natural disaster (such as thunder, earthquake, etc.),

acts by third parties, accidents, owner's intentional or

unintentional misuse, or uses in other improper con-

ditions.

• Toshiba is not liable for incidental damages (such as

profit loss or interruption in business, modification or

erasure of recorded data, etc.) caused by use or inabili-

ty to use of this product.

• Toshiba is not liable for any damage caused by neglect

of the instructions described in the owner's manual.

• Toshiba is not liable for any damage caused by misuse

or malfunction through simultaneous use of this prod-

uct and the connected equipment or software that

Toshiba is not concerned with.

Cautions on handling discs

• Do not put a flower vase filled with water or any small

metal objects on the recorder.

• Do not write on the printed side with a ball-point pen

or pencil.

• Do not use record cleaning sprays or antistatic. Also,

do not use volatile chemicals, such as benzene or

thinner.

• Do not apply labels or stickers to discs. (Do not use

discs fixed with exposed tape adhesive or leftover

peeled-off stickers.)

• Do not use scratch-proof protectors or covers.

• Do not use discs printed with label printers available

on the market.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electrici-

ty can affect normal operation of this recorder. If this

occurs, turn the recorder off and on again with the

POWER button, or disconnect and then reconnect the

power cord to the wall outlet. The recorder will operate

normally.

• Be sure to remove the disc and turn off the recorder after use.

• Disconnect the power cord from the wall outlet when you

don’t intend to use the recorder for long periods of time.

• Clean the disc by wiping in a straight line from the inside

to the outside of the disc.

• Do not load warped or cracked discs.

4 - English

English - 5

Download from Www.Somanuals.com. All Manuals Search And Download.

• DVD-RW (VR mode)

Protection

Disc Specifications

Using CD-R/RW

- This is a format that is used for recording data on a

DVD-RAM or DVD-RW disc. You can repeat recording,

editing, deleting, partial deletion, creation of playlist,

and etc.

This DVD Recorder-VCR can

allow you to protect the con-

tents of your discs, as

• Use a 700MB(80 minutes) CD-R/RW disc.

If possible, do not use a 800MB(90 minutes) or above

disc, as the disc may not play back.

• If the CD-R/RW disc was not recorded as a closed ses-

sion, you may experience a delay in the early play-

back time, and all recorded files may not play.

• Some CD-R/RW discs may not be playable with this

unit, depending on the device which was used to burn

them.

DVD-Video

described below.

• Cartridge-protected:

With the write-protect tab

set in the protect position,

the contents of the disc cannot be recorded, edited, or

erased.

• Program-protected: See page 78 “Locking the title

List”

• Disc-protected: See page 89 “Disc Protection”

- A disc that is recorded in this mode may not be played

by existing DVD players.

• A digital versatile disc (DVD) can contain up to 135-

minutes of images, 8-language audio and 32 subtitle

languages. It is equipped with MPEG-2 picture com-

pression and Dolby 3D surround, allowing you to

enjoy vivid and clear theater quality images in the

comfort of your own home.

• When switching from the first layer to the second

layer of a double-layered DVD Video disc, there may

be momentary distortion in the image and sound.

This is not a malfunction of the unit.

• DVD-RW (Video mode)

- This is a format that is used for recording data on a

DVD-RW or DVD-R disc. The disc can be played by an

existing compatible DVD player once it has been final-

ized.

For contents recorded on CD-R/RW media from CDs

for your personal use, playability may vary depending

on contents and discs.

- If a disc that has been recorded in Video mode by a dif-

ferent manufacturer's recorder and other Toshiba model

but has not been finalized it cannot be played or addi-

tionally be recorded by this recorder.

❋

DVD-RAM/DVD-RW/DVD-R discs that are incom-

patible with the DVD-VIDEO format can not be

played with this product.

DVD-R Disc Playback and Recording

• Once a DVD-R/RW recorded in Video Mode is final-

ized, it becomes DVD-Video.

❋

For more information on recording a DVD, consult

your DVD-RAM/DVD-RW/DVD-R manufacturer.

If poor quality DVD-RAM/DVD-RW/DVD-R discs

are used, your recordings may fail.

DVD-RAM Disc Playback and Recording

• Once a DVD-RW/-R recorded in Video Mode is final-

ized, it becomes DVD-Video.

• You can record onto the available space on the disc

and perform editing functions such as giving titles to

discs and programs and erasing programs before final-

izing.

• When programming is erased from a DVD-R, that

space does not become available. Once an area on a

DVD-R is recorded on, that area is no longer available

for recording, whether the recording is erased or not.

• It takes about 30 seconds for the unit to complete

recording management information after recording fin-

ishes.

• This product optimizes the DVD-R for each recording.

Optimizing is carried out when you start recording

after inserting the disc or turn on the unit. Recording

onto the disc may become impossible if optimizing is

carried out too many times.

• DVD-RAM discs come with or without a cartridge. For

this product, we recommend DVD-RAM discs that

come with cartridges.

Audio CD

Do not use the following discs!

• Some cartridges are able to eject the disc inside. Even

if you are able to eject the disc, always use the disc

with the cartridge to ensure correct operation.

• DVD-RAM discs have a Write Protect tab in order to

avoid accidental erasure of recorded data. With the

Write Protect tab set to PROTECT, you can play the

disc, but recording or erasing will not work. Set the

Write Protect tab to UNPROTECT to format the disc

or erase data.

• Ensure that the recording mode is set to VR mode.

Otherwise, this product will not be able to play the

recording.

• You cannot play a DVD-RAM in most DVD players

due to compatibility issues.

• Only DVD-RAM standard Version 2.1 discs can be

played in this unit.

• DVD-RAM recorded on this unit may not work with

other DVD Players. To determine compatibility with

these DVD-RAM discs, refer to the user’s manual for

the player.

• This unit is compatible with both non-cartridge and car-

tridge DVD-RAM, but the write-protect tabs on cartridge-

type discs give better protection to your recordings.

• An audio disc on which 44.1kHz PCM Audio is

recorded.

• Plays CD-DA format audio CD-R and CD-RW discs.

This unit may not be able to play some CD-R or CD-

RW discs due to the condition of the recording.

• LD, CD-G, CD-I, CD-ROM, DVD-ROM, VCD, DVD+R

and DVD+RW discs should not be used in this product.

[Note]

Disc types that can be played : CD/CD-R/

CD-RW/MP3/JPEG/DVD-Video/DVD-RAM/ DVD-

RW/DVD-R. However, if your DVD-RW/-R disc was

recorded with another device, it may be played only if it

was recorded and finalized in video mode.

• Some commercial discs and DVD discs purchased out-

side your region may not be playable with this prod-

uct. When these discs are played, either “No disc.” or

“Please check the regional code.” will be displayed.

• If your DVD-RW disc is an illegal copy or is not in

DVD video format, it may also not be playable.

CD-R/RW

MP3 CD-R/RW

• Playback may be impossible in some cases due to the

condition of recording.

• It may not be able to play some DVD-R discs depend-

ing on the disc and the condition of the recording.

• Only CD-R discs with MP3 files recorded with

ISO9660 or JOLIET format can be played back.

• Only MP3 files with the "mp3" or "MP3" extension

can be used.

• For MP3 files recorded with a VBR(Variable Bit Rates),

from 32 Kbps to 320 Kbps, the sound may cut in out.

• Playable bitrate range is from 56Kbps to 320Kbps.

• The unit can handle a maximum of 1000 including

both files and folders.

DVD-RW Disc Playback and Recording

• Recording and playback can be performed on DVD-

RW discs in both Video and VR Modes.

• Once a DVD-RW recorded in VR Mode is finalized,

you cannot perform additional recording.

• Once a DVD-RW recorded in Video Mode is finalized,

it becomes DVD-Video.

• In both modes, playback can be performde before and

after finalization, but additional recording, deleting

and editing can not be performed after finalization.

• If you want to record the disc in VR Mode and then

record in VR Mode, be sure to execute format. Be care-

ful when executing Format because all the recorded

data will be lost.

COPY PROTECTION

JPEG CD-R/RW

•

Many DVD discs are encoded with copy protection.

Because of this, you should only connect your DVD

Recorder-VCR directly to your TV, not to a VCR.

Connecting to a VCR results in a distorted picture from

copy-protected DVD discs.

This product incorporates copyright protection tech-

nology that is protected by methods claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

• Only JPEG files with the ".jpg"or ".JPG" extension can

be used.

• The unit can handle a maximum of 1000 including

both files and folders.

• Maximum size of progressive JPEG is 3M pixels.

• MOTION JPEG is not supported.

• A DVD-RW blank disc is initialized to VR Mode when

first initialized.

6 - English

English - 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Title List . . . . . . . . . . . . . . . . . . . . .75

Playing a Title List Entry . . . . . . . . . . . . . . .76

Renaming a Title List Entry . . . . . . . . . . . .77

Deleting a Title List Entry . . . . . . . . . . . . . .78

Locking a Title List Entry . . . . . . . . . . . . . .79

Deleting a Section from a Title List Entry . .80

Creating a Playlist Entry . . . . . . . . . . . . . . .81

Editing a Playlist Entry . . . . . . . . . . . . . . . .83

Editing Scene for a Playlist Entry . . . . . . . . .84

Copying a Playlist Entry to the VCR . . . . . .88

Deleting a Playlist Entry from the Playlist . .88

Disc Manager . . . . . . . . . . . . . . . . . . . . . . . .89

Setting Up the Language Features . . . . . . . .29

Setting Up the Audio Options . . . . . . . . . . .30

Setting Up the Display (Video) Options . . . .31

Setting Up the Parental Control . . . . . . . . . .32

Auto Channel Memory . . . . . . . . . . . . . . . .33

Channel Add/Delete . . . . . . . . . . . . . . . . . .34

RF Output Channel . . . . . . . . . . . . . . . . . . .35

Guide Channel Setup . . . . . . . . . . . . . . . . . .35

VCR Setting . . . . . . . . . . . . . . . . . . . . . . . .36

Video Input . . . . . . . . . . . . . . . . . . . . . . . .37

Front Display . . . . . . . . . . . . . . . . . . . . . . .38

Photo CD Playback . . . . . . . . . . . . . . . . . . .54

Playing back MP3 CD . . . . . . . . . . . . . . . . .55

Using PIP . . . . . . . . . . . . . . . . . . . . . . . . . . .56

*VCR Playback

Contents

Playing the VCR . . . . . . . . . . . . . . . . . . . . .57

Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Special VCR Playback Features . . . . . . . . . .58

S-VHS Playback . . . . . . . . . . . . . . . . . . . . .58

Variable Search System . . . . . . . . . . . . . . . . .59

ꢁ

Getting Started

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Features . . . . . . . . . . . . . . . . . . . . .10

Before Reading the User’s Manual . . . . . . . .11

How to use the DVD Recorder-VCR . . . . . . .11

Front Panel . . . . . . . . . . . . . . . . . . . . . . . .13

Front Panel Display . . . . . . . . . . . . . . . . . . .13

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . .14

Tour of the Remote Control . . . . . . . . . . . .15

ꢁ

Recording

*DVD Recording

ꢁ

Playback

Before Recording . . . . . . . . . . . . . . . . . . . . .60

Recording the current channel you are watching 62

Making a One Touch Recording(OTR) . . . . .63

VCR Plus+ Record . . . . . . . . . . . . . . . . . . . .63

Making a Timer Recording . . . . . . . . . . . . . .64

Editing Timer Record List . . . . . . . . . . . . . .66

Deleting a Timer Recording Entry . . . . . . . .67

Watching the Images Being Recorded (Time Slip) . .68

Recording From External Devices . . . . . . . .68

Recording through a DV input jack . . . . . . .69

*VCR Recording

ꢁ

Reference

*DVD Playback

Troubleshooting (DVD-VIDEO/DVD-RAM/

DVD-RW/DVD-R) . . . . . . . . . . . . . . . . . . . .96

Troubleshooting . . . . . . . . . . . . . . . . . . . . .97

Problems and Solutions (VCR) . . . . . . . . . .98

Specifications . . . . . . . . . . . . . . . . . . . . . . .99

Before Playing . . . . . . . . . . . . . . . . . . . . . . .39

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . .40

Using the Search & Skip Functions . . . . . . .42

Slow Motion Play / Step Motion Play . . . . . .42

About QUICK . . . . . . . . . . . . . . . . . . . . . . .43

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . .44

Using the A-B Repeat Function . . . . . . . . . .45

Moving to a Scene Directly . . . . . . . . . . . . .45

Selecting the Subtitle & Audio Language . . .46

Changing the Camera Angle . . . . . . . . . . . .47

Using Bookmarks . . . . . . . . . . . . . . . . . . . . .48

Zooming-In . . . . . . . . . . . . . . . . . . . . . . . .49

Check Remaining Time . . . . . . . . . . . . . . . .50

Using the Disc and Title menu . . . . . . . . . . .50

Playing Back an Audio CD (CDDA) . . . . . . .51

Play Option Mode . . . . . . . . . . . . . . . . . . . .52

To Program Tracks . . . . . . . . . . . . . . . . . . . .53

ꢁ

Connecting & Setting Up

Quick Overview . . . . . . . . . . . . . . . . . . . . . .16

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . .17

Connecting the Antenna Cable . . . . . . . . . .17

Connecting the Video Cable . . . . . . . . . . . .18

Connecting the Audio Cable . . . . . . . . . . . .20

Connecting External Devices . . . . . . . . . . . .22

Connecting Power Cord . . . . . . . . . . . . . . . .23

Preparing the Remote Control . . . . . . . . . . .23

Basic VCR Recording . . . . . . . . . . . . . . . . . .69

Special Recording Features . . . . . . . . . . . . .70

Record Speed . . . . . . . . . . . . . . . . . . . . . . . .70

Copy to DVD or VCR . . . . . . . . . . . . . . . . .71

ꢁ

System Setup

On-Screen Menu Navigation . . . . . . . . . . . .25

Auto Clock Set . . . . . . . . . . . . . . . . . . . . . .26

Manual Clock Set . . . . . . . . . . . . . . . . . . . .27

Channel Set . . . . . . . . . . . . . . . . . . . . . . . .28

ꢁ

Editing

Viewing the Menu Functions for a Disc . . . .73

8 - English

English - 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Time Slip and Picture In Picture (PIP)

Use the Time Slip function to playback the recorded images

while a recording is

proceeding (DVD-RAM only). Use the PIP function to view

the playback and recording screens at the same time.

Reading the User’s

Manual

How to use the DVD

Recorder-VCR

General Features

Make sure to check the following matters when reading

the user’s manual.

The D-VR3 allows you to record and playback high quality

digital images on a DVD-RAM/DVD-RW/DVD-R disc. You

can also edit digital images on DVD-RAM/

DVD-RW discs.

High quality progressive scan

Step 1

Select the disc type

Progressive scanning provides high resolution and flicker

free images. The 10-bit 54-MHz DAC, 2D Y/C Separating

circuitry and Time Base Corrector processor technology pro-

vide you with higher image playback and recording quality.

(See pages 19~20.)

This unit can record on the following types of discs.

If you want to repeatedly record on the same disc or you want

to edit the disc after recording, select a rewritable DVD-RW or

DVD-RAM type disc. If you want to save a recording without

any changes, choose a non-rewritable DVD-R.

Icons that will be used in manual

Icon

Term

Definition

High quality digital audio and video recording and play-

back

This involves a function avail-

able in DVD or Video Mode

DVD-R

DVD

Record up to about 12-hour images with a double side 9.4

GB DVD-RAM disc, and up to about 6-hour images with a

4.7 GB DVD-RAM disc, depending on the recording mode.

A variety of functions with easy-to-use user inter-

face

This involves a function avail-

able in DVD-RAM

RAM

This involves a function avail-

able in DVD-RW

Integrated menu system and messaging functionality allow

you to perform the desired operations conveniently. With a

DVD-RAM/DVD-RW(VR mode) disc, you can edit recorded

images, create playlist, and edit images in specific sequence

according to your needs.

Creating DVD video title using DVD-RW/DVD-R disc

This involves a function avail-

able in DVD-R

With D-VR3SU, D-VR3SC, create your own DVD video title

on 4.7 GB DVD-RW/DVD-R discs.

This involves a function avail-

able in a data CD (CD-ROM,

CD-R, or CD-RW

This involves a function avail-

able in a data picture CD (CD-

ROM, CD-R, or CD-RW)

Step 2

Format the disc to start recording

A Variety of Recording Options

JPEG

Select an appropriate recording mode between XP, SP, LP and

EP to meet your

recording needs. (See pages 63~65.)

• XP mode - High quality, about 1 hour

• SP mode - Standard quality, about 2 hours

• LP mode - Low quality, about 4 hours

• EP mode - Lower quality, about 6 hours

Unlike a VCR, the recorder automatically starts formatting when

an unused disc is inserted. This is required for the preparation

of recording on a disc.

This involves a function avail-

able in a data CD (CD-ROM,

CD-R, or CD-RW on which

MP3 is recorded)

MP3

Using a DVD-RAM

This type of disc can be formatted in DVD-Video Recording for-

mat (VR mode). You can edit recorded images and create a

playlist in a specific sequence according to your requirements.

This involves tips or instruc-

tions on the page that help

each function operate

NOTE

Using a DVD-RW

Copying digital camcorder content by using DV input jack

Check items before operating

each function

This type of disc can be formatted in either DVD-Video format

(Video mode) or DVD-Video Recording format (VR mode). For

an unused disc, a message that asks whether to format in VR

Mode or not is displayed. You can play a video mode disc on

various DVD components. A VR mode disc allows more varied

editing.

Preliminary

Record digital camcorder images onto

DVD-RAM/DVD-RW/DVD-R discs or video tape using the

DV input jack (IEEE 1394-4pin). (See page 69.)

About the use of this user’s manual

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2~7)

Using a DVD-R

2) If a problem occurs, check for Troubleshooting.

(See pages 96~98)

This type of disc can be formatted in DVD Video format. After

formatting is complete, you can record on the disc. You can play

this type of disc on various DVD components only when they

have been finalized.

ꢀ You can only use one format on a DVD-RW.

manual may be reproduced or copied without the prior

written permission of Toshiba Corporation.

ꢀ You can change the DVD-RW format to anoth-

Note

er format. It should be noted that the data of

the disc will be lost when changing formats.

10 - English

English - 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Finalizing & Playing on

other DVD components

Step 3

Recording

Step 6

Description

There are two different recording methods: Direct Recording

and Timer Recording. Timer recording is classified as record-

ing type : Once, Daily or Weekly or recording mode : XP

(high quality mode), SP (standard quality mode), LP (long

recording mode), and EP (extended mode) according to the

recording mode.

To play your DVD on other DVD components, finalizing may

be necessary. First, finish all editing and recording opera-

tions, then finalize the disc.

Front Panel

When using a DVD-RW disc in VR Mode

Although finalizing is generally unnecessary when playing

the disc on a VR Mode compatible component, a finalized

disc should be used for playback on that type of component.

When using a DVD-RW disc in Video Mode

The disc should be finalized first to enable playback on any-

thing compatible other than this recorder. No more editing

or recording can be made on the disc once it has been final-

ized.

I /

DUBBING

ON/STANDBY

TO DVD TO VCR

Step 4

Playing

To enable recording on the disc again, Disc should be

unfinalized.

13 14 15 16 17 18 19

You can select the title you want to play in a displayed menu

and then immediately start playback.

When using a DVD-R disc

1. DVD DECK

12. FRONT PANEL DISPLAY

You should finalize the disc to play it a compatible compo-

nent other than this recorder. You cannot edit or record on

the disc once it has been finalized.

A DVD consists of sections, called titles, and sub sections,

called chapters.

2. DVD OPEN/CLOSE BUTTON

3. VCR DECK

13. DVD/VCR SELECT BUTTON

14. TIME SLIP BUTTON

15. RECORD BUTTON

4. VCR EJECT BUTTON

5. POWER BUTTON

During recording, a title is created between two points where

you start and stop recording, DVD-R/DVD-RW discs(in

Video mode) can automatically create chapters according to

the recording mode when finalized.

16. REW/SKIP BUTTON (VCR/DVD)

17. STOP BUTTON

6. PROGRESSIVE BUTTON

7. S-VIDEO INPUT JACK

8. VIDEO INPUT JACK

9. AUDIO L.R INPUT JACK

10. DV INPUT JACK

18. PLAY/STILL BUTTON

19. F.F/SKIP BUTTON (VCR/DVD)

20. TO DVD BUTTON

21. TO VCR BUTTON

11. CHANNEL

BUTTON

Front Panel Display

Step 5

Editing a recorded disc

Editing on discs is easier than conventional video tapes. The

recorder supports many different edit functions, possible only

with DVDs.

With a simple edit menu, you can operate various edit func-

tions, such as delete, copy, rename, lock, etc., on a recorded

title.

Creating a playlist (DVD-RAM/-RW in VR mode)

1. When the indicator is on, DVD is activated.

2. DVD-RAM is activated.

7. DVD or CD media is loaded.

8. Record function is working.

9. The time, counter position or current deck

status is indicated.

With this recorder, you can create a new playlist on the same

disc and edit it without the change of the original recording.

3. DVD-R or DVD-RW is activated.

4. Progressive Scan mode is working.

5. When you watch SAP/STEREO channel or play-

back Hi-Fi VCR tapes, STEREO indicator lights.

6. VCR is activated.

10. When you set a Timer recording, it or current-

deck status is indicated. this indicator is lit.

11. VHS Videotape is loaded.

12 - English

English - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

10. MENU Button

Tour of the Remote Control

Rear Panel

Brings up the DVD Recorder-VCR’s setup

menu.

11. TITLE LIST(DISC MENU) Button

Use this to enter the View Recording list/disk

menu.

(FROM ANT.)

COMPONENT

VIDEO OUT

AUDIO OUT

LINE OUT

LINE IN

STANDBY

TV ON / STANDBTY

AUDIO

12. ENTER/DIRECTION Buttons

CB/PB

(UP/DOWN or LEFT/RIGHT Buttons)

This button functions as a toggle switch.

DIGITAL AUDIO OUT

CR/PR

OUT

OPTICAL

(TO TV)

COAXIAL

VIDEO

13. RETURN Button

Returns to a previous menu.

TV MUTE

AUDIO

100

14. TV/VCR Button

SELECT

2 3

9 10 11

INPUT SEL.

DVD

VCR

VOL

15. DISPLAY Button

CH / TRK

OPEN/CLOSE

VCR Plus+

/ ADV SKIP

This will display current setting or disc status.

1. S-VIDEO OUT JACK

7. VIDEO OUT JACK

8. VIDEO IN JACK

MARKER

16. REC Button

2. AUDIO OUT L,R JACK

Use to make a recording on DVD-RAM/-RW/-R

discs.

3. DIGITAL AUDIO OUT JACK (OPTICAL)

4. DIGITAL AUDIO OUT JACK (COAXIAL)

5. COMPONENT VIDEO OUT JACK

6. AUDIO OUT R,L JACK

9. AUDIO IN R,L JACK

10. RF OUT TO TV JACK

11. RF ANTENNA INPUT JACK

17. PIP Button

Use to watch a subprogram on the PIP screen

while watching the main program on the main

screen.

18. DVD COPY Button

Press this when you copy VCR to DVD.

RETURN

CLEAR

19. TV POWER Button

DISPLAY

REC

VCR SUBTITLE

REC SPEED

REC PAUSE

TIME SLIP

20. AUDIO/TV MUTE Button

DVD

VCR

Use this to access various audio functions on a

disc (DVD mode).

COPY

PIP

This operates as sound mute. (TV mode)

21. TV Button

Press this to operate TV.

22. INPUT Button

Select line input signal in external input

mode(Tuner or Line input)

23. F.ADV/SKIP Button

1. POWER Button

24. MARKER Button

2. NUMBER Button

3. 100+ Button

Use this to bookmark a position while playing a

disc.

Press this to select channel 100 or higher.

25. QUICK Button

4. VCR Button

Use this to view the status of the disc that is

being played.

5. DVD Button

Press this when you use a DVD.

26. PLAY LIST(TOP MENU) Button

Use this to return to the Top menu, or to view

the recorded files list.

6. OPEN/CLOSE Buttons

To open and close the disc tray.

27. CLEAR Button

7. TV Control Button

• VOLUME Button

28. SUBTITLE Button

TV volume adjustment

Press this to switch the DVD’s subtitle language.

29. REC SPEED Button

• CHANNEL Button

Use this to select a TV channel.

30. REC PAUSE Button

Use this to pause during recording.

8. VCR Plus+ Button

Use to recording using VCR Plus+ function.

31. TIME SLIP Button

9. Playback-related Buttons

32. VCR COPY Button

Forward/Rewind, Search, Skip, Stop, Play/Pause

Press this when you copy DVD to VCR.

14 - English

English - 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Method1 : Antenna + DVD Recorder-

VCR + TV : No Cable box

You can record non-scrambled channels by selecting the

channel on the DVD Recorder-VCR. Also use this Method if

you watch channels without cable box.

Step 1: Unpacking

Quick Overview

Connecting &

Setting Up

A Quick overview presented in this guide will give you

enough information to start using the recorder.

Accessories

Check for the supplied accessories below.

Video/Audio Cable

RF Cable for TV

Remote Control

Batteries for Remote Control (AA Size)

User’s Manual

Dispose of used batteries according to local environmental

regulations. Do not put them in the household trash.

•

Step 1 : Unpacking

❷

Step 2 : Connecting the Antenna Cable

❷

Step 2: Connecting the

Antenna Cable

Step 3 : Connecting the Video Cable

❷

Step 4 : Connecting the Audio Cable

There are several ways to connect your DVD Recorder-VCR.

Select one of the following antenna connections that best

suits you below.

❷

Method 2 : Antenna +Cable box +

DVD Recorder-VCR + TV : Cable box

with many scrambled channels

Step 5 : Connecting External Devices

•

Method 1 : Antenna + DVD Recorder-VCR + TV : No Cable

box

Method 2 : Antenna +Cable box + DVD Recorder-VCR + TV

: Cable box with many scrambled channels

Method 3 : Antenna + DVD Recorder-VCR + Cable box + TV

: Cable box with a few scrambled channels

❷

You can record channels by selecting the channel on the

cable box. You cannot record one channel while watching

another channel. Be sure that the cable box is turned on.

Step 6 : Connecting the Power Cord

❷

ꢀ If you are using an off-air antenna that has 300-

Step 7 : Preparing the Remote Control

ohm twin flat leads, use an external antenna con-

Note

nector (300-75 ohm adaptor : not supplied) to con-

nect the antenna to the DVD Recorder-VCR.

ꢀ If you have two separate antennas (one VHF and

one UHF), use a UHF/VHF combiner-adaptor

(available at most electronics shops) to connect the

antenna to the DVD Recorder-VCR.

•

Quick Overview . . . . . . . . . . . . . . . . . . . 16

Unpacking . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting the Antenna Cable . . . . . . . . 17

Connecting the Video Cable . . . . . . . . . . 18

Connecting the Audio Cable . . . . . . . . . . 20

Connecting External Devices . . . . . . . . . 22

Connecting the Power Cord . . . . . . . . . . 23

Preparing the Remote Control . . . . . . . . . 23

• Note to CATV system installer : This reminder is

pro-video to call CATV system installer’s attention to

Article 820-40 of the National Electrical Code (Section 54

of Canadian Electrical Code, Part I), that provides guide-

lines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding sys-

tem of the building as close to the point of cable entry as

practical.

English - 17

16 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Method 3 : Connecting to Component

video input jacks(Y,CB/TB,CR/PB) in

480i mode

Method 3 : Antenna + DVD

Recorder-VCR + Cable box +TV :

Cable box with a few scrambled

channels

Method 2 : Connecting to an S-video

input jack

•

Compared to standard interlaced video, progressive scan

doubles the amount of video beam lines fed to your TV,

resulting in a more stable, flicker-free, and clear image than

interlaced video. The progressive scan video output jack is

used in progressive output mode. This is only available

with TVs that support progressive scan.

Consumers should note that not all high definition televi-

sion sets are fully compatible with this product and may

cause artifacts to be displayed in the picture. If you experi-

ence 480 progressive scan picture problems, it is recom-

mended that you switch the connection to the ‘standard

definition’ output. If there are questions regarding TV set

compatibility with this unit, please contact our customer

service center.

Connect an S-video cable(not supplied) between the S-

VIDEO OUT jack on DVD Recorder-VCR and S-VIDEO IN

jack on the TV (or AV amplifier).

You will enjoy high quality images. S-Video separates the

picture element into black and white (Y) and color (C)

signals to present clearer images than regular video input

mode.

1. Connect Component video cables(not supplied) between

the COMPONENT VIDEO OUT jacks on DVD Recorder-

VCR and COMPONENT VIDEO IN jacks on the TV (or

AV amplifier).

2. Make sure that the disc has stopped completely before

changing the mode.

You can record non-scrambled channels by selecting the

channel on the cable box. You cannot record scrambled

channels that require a cable box.

•

If anything is not displayed on front panel display, it is

480i Mode.

Method 1 : Connecting to a video

input jack

Connect a video(yellow) cable between the VIDEO (yellow)

OUT jack on DVD Recorder-VCR and VIDEO(yellow) IN

jack on the TV(or AV amplifier).

•

You will enjoy regular quality images.

Connect audio cables (white and red) between the ANA-

LOG AUDIO OUT jack on the DVD Recorder-VCR and

AUDIO IN jack on TV (or AV amplifier).

Step 3: Connecting the

Video Cable

•

You will enjoy high quality accurate color reproduction.

Component video separates the picture element into black

and white (Y), blue (Pb) and red (Pr) signals to present

most clear and clean images.

There are several ways to connect your DVD Recorder-VCR.

Select one of the following video connecting methods that

best suits you below.

Method 1 : Connecting to a Video input jack

Method 2 : Connecting to an S-video input jack

Method 3 : Connecting to Component video input jacks in

480i mode

ꢀ Make sure that the color coded connections match.

•

The Y, Pb and Pr component output jacks of your

Note

DVD Recorder-VCR must be connected to the

exact corresponding component input jacks on

your TV. Otherwise, red or blue images will be dis-

played on the TV screen.

•

Method 4 : Connecting to Component video input jacks in

480p mode

ꢀ Make sure that the left and right audio output

jacks of your DVD Recorder-VCR are connected to

the left and right audio input jacks of your TV,

respectively.(page 20)

S-Video, Component video and Progressive Output

Modes

•

S-Video and Component video output are available only if

your TV supports S-Video input or Component video

input, respectively. If S-Video or Component video output

does not work, check the TV connections and the TV

input selection settings.

18 - English

English - 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Method 4 : Connecting to

Component video input

Method 3 : Connecting to an AV

Method 2 : Connecting to a stereo

amplifier with analog input jacks

amplifier with the digital input jack

Step 4 : Connecting

the Audio Cable

jacks(Y,CB/TB,CR/PB) in 480p mode

If your AV amplifier only has a Dolby Digital or DTS

decoder and a digital input jack, use this connection.

To enjoy Dolby Digital or DTS sound, you must set up

the audio settings. (See page 30)

If your stereo amplifier only has audio input jacks

(L and R), use the analog audio out jacks.

Your TV must support progressive scan input to allow you to

watch 480p video output.

1. Connect Component video cables(not supplied) between

the COMPONENT VIDEO OUT jacks on DVD Recorder-

VCR and COMPONENT VIDEO IN jacks on the TV (or

AV amplifier).

There are several ways to connect your DVD Recorder-VCR.

Select the audio connection that best suits you below.

2. Make sure that the disc has stopped completely before

changing the mode. Press the Progressive button on the

front panel. The mes-sage “Press “Yes” to confirm

Progressive scan mode. Otherwise press “No”.” will be dis-

played. If you want 480P mode, select yes. If “480P” is dis-

played on the front panel display, now your DVD

Recorder-VCR is operated on 480P Mode.

•

Method 1 : Connecting to your TV

Method 2 : Connecting to a stereo amplifier (analog audio

out / digital audio out)

Method 3 : Connecting to an AV amplifier with a digital

input jack.

•

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

Method 1 : Connecting to your TV

This connection will use your TV’s speakers.

ꢀ Make sure that the color coded connections match.

That is, the Y, Pb and Pr component output jacks

Note

of your DVD Recorder-VCR should be connected

to the exact corresponding component input jacks

on your TV. Otherwise, red or blue images will be

displayed on the TV screen.

ꢀ Once 480p video output mode is selected, Video,

S-Video and 480i outputs are disabled.

ꢀ Make sure that the left and right audio output

jacks of your DVD Recorder-VCR are connected to

the left and right audio input jacks of your TV,

respectively.(page 21)

20 - English

English - 21

Download from Www.Somanuals.com. All Manuals Search And Download.

Method 2 : Connecting a

Camcorder to the LINE IN 2 jacks

You can use the LINE IN 2 jacks on the front panel

of the DVD Recorder-VCR. You can record from connected

equipment.

When an input source is inserted into LINE IN 2 while viewing

TV, the input will be switched to LINE IN 2 automatically.

Step 7 : Preparing the

Remote Control

Step 5 : Connecting

External Devices

Step 6 : Connecting

the Power Cord

After all connections are complete, plug the power cord

in the wall outlet.

This allows you to connect your DVD Recorder-VCR to other

external devices and view or record their outputs.

Install Batteries in the Remote Control

Open the battery cover on the back of the remote.

•

• Insert two AA batteries. Make sure that the polarities

(+ and -) are aligned correctly.

“AUTO” in the front panel display flickers. This means that

the current time is being set automatically (Auto Program)

through the antenna under connection. The setup may take

several minutes.

•

Method 1 : Connecting a VCR, Set-Top Box(STB) or DVD

player to the AUDIO/VIDEO LINE IN 1 jacks.

Method 2 : Connecting a Camcorder to the LINE IN 2 in

jacks.

•

Replace the battery cover.

If the remote does not operate properly:

Method 3 : Connecting a Camcorder to the DV IN jack.

•

Check the polarity + - of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if the remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

When it normally operates, the current time is automatically

set and displayed in the front panel display.

Method 1 : Connecting a VCR,

Settop Box(STB) or DVD player to

the AUDIO/VIDEO LINE IN 1 jacks

If “- - - -“ appears, however, it means that auto time setting

has failed.

In that case, set the current time through the manual clock

set, as shown in pages 27~28.

Dispose of used batteries according to local environ-

mental regulations. Do not put them in the house-

hold trash.

Connecting a VCR or external device to AUDIO/VIDEO

LINE IN 1 jacks of the DVD Recorder-VCR.

You can record a copy free contest from connected equip-

ment (VCR, STB or DVD).

Method 3 : Connecting a

Camcorder to the DV IN jack

If your camcorder has a DV output jack, connect it to the DV

input jack of your DVD Recorder-VCR.

Whenever pulling the power cord out of the wall

outlet and plugging it again, auto time setting will

be working.

•

If your camcorder has a DV output jack, see page 69 for

more information.

•

Do not expose the remote sensor of the recorder to a

strong light source such as direct sunlight or other illumi-

nation. If you do so, you may not be able to operate the

recorder via the remote control.

ꢀ You can also use the LINE IN 2 jacks on the front

panel of the DVD Recorder-VCR.

Note

ꢀ When the S-Video jack and Video jack are both

connected, the S-Video jack will have priority. Line

Selection will be automatically done.

• Some models of DV format digital video cameras

may support a different compression format. From

such equipment, recording is not possible.

• Depending on the models of DV format digital video

cameras, recording may not work properly or some

functions may be disabled.

ꢀ Copy protected content cannot be recorded.

22 - English

English - 23

Download from Www.Somanuals.com. All Manuals Search And Download.

To determine whether your television is compatible,

follow the instructions below.

Setting the Remote Control

On-Screen Menu

Navigation

Your DVD Recorder-VCR remote control will work with

Toshiba televisions and compatible brands.

1. Switch your television on.

2. Point the remote control towards the television.

3. Hold down the TV button and enter the two-figure code

corresponding to the brand of your television, by pressing

the appropriate numeric buttons.

System Setup

STANDBY

TV ON / STANDBTY

The on-screen menus allow you to enable or disable vari-

ous functions on your DVD Recorder-VCR. Use the follow-

ing buttons to open and navigate through the on-screen

menus.

Brand

Codes

Brand

Codes

08, 13

TOSHIBA

RCA/GE

SONY

SHARP NEW

SANYO

TV MUTE

AUDIO

100

MAGNAVOX

GOLDSTAR

SAMSUNG

ZENITH

DVD-RAM(VR)

SELECT

INPUT SEL.

MITSUBISHI

JVC

DVD

VCR

VOL

CH / TRK

OPEN/CLOSE

VCR Plus+

/ ADV SKIP

MARKER

HITACHI

PANASONIC

07, 15

PIONEER

Result: If your television is compatible with the remote con-

trol, it will switch off.

It is now programmed to operate with the remote

control.

MENU Button

Press this button on the remote control while the

DVD or VCR is in Stop or Play mode to open the

on-screen MAIN MENU.

RETURN

CLEAR

ꢀ If several codes are indicated for your television

DISPLAY

REC

VCR SUBTITLE

REC SPEED

REC PAUSE

TIME SLIP

brand, try each one in turn until you find one that

Note

DVD

VCR

works.

COPY

PIP

Up/Down and Left/Right

Use these buttons to move the selection bar

up/down and left/right to cycle through the

menu options.

You can then control the television using the following

buttons.

Button

Function

POWER

Used to switch the television on and off.

INPUT SEL. Used to select an external source.

VOL + or - Used to adjust the volume of the television.

CH ( or ) Used to select the required channel.

TV MUTE Used to toggle the sound on and off.

Enter Button

Press this button on the remote control to confirm

•

On-Screen Menu Navigation . . . . . 25

Auto Clock Set . . . . . . . . . . . . . . . 26

Manual Clock Set . . . . . . . . . . . . . 27

Channel Set . . . . . . . . . . . . . . . . . 28

Setting Up the Language Features 29

Setting Up the Audio Options . . . . 30

Setting Up the Display (Video) Options . . . 31

Setting Up the Parental Control . . . 32

Auto Channel Memory . . . . . . . . . 33

Channel Add/Delete . . . . . . . . . . . 34

RF Out Channel . . . . . . . . . . . . . . 35

Guide Channel Setup . . . . . . . . . . 35

VCR Setting . . . . . . . . . . . . . . . . . 36

Video Input . . . . . . . . . . . . . . . . . 37

Front Display . . . . . . . . . . . . . . . . 38

any new settings.

Return Button

Press this button on the remote control to return to

the last MENU screen displayed or to exit the on-

screen MENU all together.

ꢀ The various functions will not necessarily work on

all televisions. If you encounter problems, operate

the television by using the TV’s remote control.

Note

24 - English

English - 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Select Auto Clock Set using the œ❷ꢀbuttons, then

press the ❿ or ENTER button.

Time ZONE

Auto Clock Set

Manual Clock Set

Select the time zone of your area using the œ❷ꢀbut-

tons then press the ❿ꢀor ENTER button. Select

Automatic to set the time zone automatically.

No Disc

Clock Set

Auto Clock Set

Manual Clock Set

No Disc

Auto Clock Set

This menu is used to set the current time. You need to set

the time to use timer recording.

If Auto Setup fails to set the DVD Recorder-VCR’s internal

clock by locating a local TV station, follow these steps to set

the date and time manually.

NOTE: For accurate Timer Recording, your DVD Recorder-

VCR's internal clock must be set correctly.

Clock Data CH

: Automatic

Automatic

Atlantic

: Automatic

Time Zone

Daylight Saving

: Automatic

Eastern

Central

With the unit in Stop mode, press the MENU button.

Mountain

Pacific

Alaska

Hawaii

No Disc

ꢀ You must have the antenna connected to set the

Auto Clock. See page Antenna Connections

ꢀ The Clock will be automatically set when you turn

off the recorder.

Open “MENU”

Press the MENU button while the DVD or VCR is

Note

in Stop or Play mode.

Select “Setup”

Using the œ❷ buttons, move the selection bar to

Daylight Saving

“Setup” then press ENTER to select.

Select the sub menu (Clock Data CH, Time Zone or

Daylight Saving) using the œ❷ buttons, then press

the ❿ or ENTER button.

Select the On, Off or Auto using the œ❷ꢀbuttons then

press the ❿ꢀor the ENTER button.

Select Automatic to set the daylight saving automatically.

Select “Clock Set”

Use the œ❷ buttons to highlight “Clock Set”

Using the œ❷ꢀbuttons, move the selection bar to

“Setup” then press Enter to select.

No Disc

Auto Clock Set

: Automatic

No Disc

Auto Clock Set

then press the ENTER button.

Clock Data CH

Time Zone

: Automatic

Time Zone

: Automatic

Daylight Saving

: Automatic

Automatic

Select Clock Set using the œ❷ꢀbuttons, then press

the ❿ or ENTER button.

Yes

No Disc

Clock Data CH

ꢀ If your clock is set to the wrong time zone or day-

light saving, you can adjust these settings without

turning off the Auto Clock Set function.

Select “Manual Clock Set”

Move the highlight to “Manual Clock Set”, then

press the ENTER button.

• The Clock Set will change as shown.

Note

Select a channel that carries a time signal using the

œ❷ꢀbuttons then press the ❿ꢀor ENTER button.

Select Auto to set the channel automatically.

No Disc

Clock Data CH

Select channel :

Auto

26 - English

English - 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Select the desired Language using œ❷ buttons,

then press the ❿ or ENTER button.

Select “Channel Set”

Using the œ❷ buttons, move the selection bar to

Set the Clock

Setting Up the

Language Features

Use the LEFT/RIGHT buttons to select each of the

following options, then use the

œ❷ buttons to set each option:

• Month – Set the month

• Day – Set the day.

• Year – Set the year

• Hour – Set the hour

• Minute – Set the minute

• AM/PM – Set the AM/PM

“Channel Set”, then press ENTER to select.

If you set the player menu, disc menu, audio and subtitle

language in advance, they will come up automatically every

time you watch a movie.

With the unit in Stop mode, press the MENU but-

ton on the remote.

ꢀ Press the RETURN or ➛ button to return to the

previous menu. Press the MENU button to exit the

menu.

Select “Antenna/Cable TV”

Move the selection arrow to “Antenna/Cable TV”

then press right button to select from the following

options:

• Antenna - Select if the DVD Recorder-VCR is con-

nected to an indoor or outdoor VHF/UHF

Antenna.

Note

Select Setup using œ❷ꢀbuttons, then press the ❿

or ENTER button.

• Cable TV - Select if the DVD Recorder-VCR is

connected to Cable TV.

Channel Set

This feature allows you to manually set the DVD Recorder-

VCR’s tuner band to Antenna or Cable, whichever you con-

nected to the Antenna In jack during initial setup.

Select Language using œ❷ buttons, then press the

❿ or ENTER button.

Language setup menu will be displayed.

•

Use this setting only if Auto Setup detected the

incorrect tuner band, i.e. channels are coming in on the

wrong channel numbers.

Use œ❷ buttons to select the desired sub menu

and press the ENTER or ❿ button.

Open “MENU”

With the DVD in Stop press the MENU button.

Select “Setup”

Using the œ❷ buttons, move the selection bar to

“Setup” then press ENTER to select.

28 - English

English - 29

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the œ❷ buttons to select the desired item.

Then press the RIGHT or ENTER button.

Setting Up the Audio

Options

Setting Up the

Display(Video) Options

ꢀ Press the RETURN or ➛ button to return to the

previous menu. Press the MENU button to exit the

menu.

ꢀ Press the RETURN or ➛ button to return to the

previous menu. Press the MENU button to exit the

menu.

Note

If you set the player menu, disc menu, audio and subtitle

language in advance, they will come up automatically every

time you watch a movie.

This function allows you to setup the TV screen settings.

Digital Output

Display(Video) Options

With the unit in Stop mode, press the MENU but-

ton on the remote.

You can’t use the Setup functions during playback.

With the unit in Stop mode, press the MENU but-

ton on the remote.

1. PCM :

Converts to PCM(2CH) 48kHz audio.

Select PCM when using the Analog

Audio Outputs.

This function depends on disc type. It may not work for

some disc types.

2. Bitstream : Converts to Dolby Digital Bitstream

(5.1CH). Select Bitstream when using

the Digital Audio Output.

Select Setup using œ❷ buttons, then press the ❿

or ENTER button.

Select Setup using œ❷ꢀbuttons, then press the ❿

or ENTER button.

TV Aspect

Depending on the type of television you have, you may

want to adjust the screen setting. (aspect ratio)

• 4:3 Letter Box : Select when you want to see the

total 16:9 ratio screen DVD supplies,

even though you have a TV with a

4:3 ratio screen. Black bars will

ꢀ Be sure to select the correct Digital Output or no

audio will be heard.

Note

appear at the top and bottom of the

screen.

DTS

• 4:3 Pan - Scan : Select this for conventional size TV

when you want to see the central

portion of the 16:9 screen. (Extreme

left and right side of movie picture

will be cut off.)

1. Off :

2. On :

Doesn’t output digital signal.

Outputs DTS Bitstream via digital out-

put only. Select DTS when connecting to

a DTS Decoder.

• 16:9 Wide :

You can view the full 16:9 picture on

your widescreen TV.

Select Video using œ❷ buttons, then press the ❿

Select Audio using œ❷ buttons, then press the ❿

or ENTER button.

Audio setup menu will be displayed.

or ENTER button.

Video option menu will be displayed.

ꢀ When DTS soundtrack is played, sound is not out-

Black Level

Adjusts the brightness of the screen.

put from Analog Audio Output.

Note

• 0 IRE :

This is the standard NTSC reference

black level for consistent bright-

ness/contrast across all sources.

This will enhance the black level for

increased brightness/contrast when

viewing DVDs.

Use œ❷ buttons to select the desired sub menu

and press the ENTER or ❿ button.

• 7.5 IRE :

Select the sub menu using œ❷ buttons, then press

the ❿ or ENTER button.

Dynamic Compression

3D NR(Noise Reduction)

• On : Select to reduce noise from the screen

• Off : Normal

1. On :

2. Off :

To select dynamic compression.

To select the standard range.

PCM

Bitstream

30 - English

English - 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Select Password ON/OFF using ❿ and œ❷ but-

tons.

Select “Channel Set”

Using the œ❷ buttons, move the selection bar to

About the Change Password;

Setting Up the Parental

Control

“Channel Set”, then press ENTER to select.

Select Change Password using œ❷ buttons, then

press the ❿ or ENTER button.

• The ‘Enter the password.’ message will be

displayed.

Off

The Parental Control function works in conjunction with

DVDs that have been assigned a rating - which helps you

control the types of DVDs that your family watches. There

are up to 8 rating levels on a disc.

Enter the 4-digit password using the 0 to 9 buttons

on the remote.

• The ‘Confirm the password.’ message will be dis-

played.

With the unit in Stop mode, press the MENU but-

ton on the remote.

Enter your password again using the 0 to 9 buttons

on the remote.

Run “Auto channel memory”

Select Setup using œ❷ buttons, then press the ❿

or ENTER button.

Move the selection arrow to “Auto Channel

Memory,” then press ENTER to select.

• The DVD Recorder-VCR will automatically

search for all available channels in the selected

Tuner Band. This procedure may take a few

minutes to complete.

ꢀ Press the RETURN or ➛ button to return to the

previous menu. Press the MENU button to exit the

menu.

Note

Select Parental control using œ❷ buttons, then

press the ❿ or ENTER button.

• When finished, the lowest channel found will

be displayed.

Select Rating Level you want using œ❷ buttons,

then press the ❿ or ENTER button.

• For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play. Larger number

indicates the program is more intended to adult

use only

Auto Channel Memory

Auto Channel Memory will automatically seek and store all

active channels in your area.

•Press ENTER button to STOP or cancel scan-

ning.

Enter the 4-digit password using the 0 to 9 buttons

on the remote.

• The ‘Confirm the password.’ message will be dis-

played. Enter your password again.

Open “MENU”

With the DVD in stop mode, press the MENU but-

ton.

Select “SETUP”

Using the œ❷ buttons, move the selection bar to

ꢀ Press the RETURN or ➛ button to return to the

“Setup” then press ENTER to select.

previous menu. Press the MENU button to exit the

Note

menu.

ꢀ Refer to Troubleshooting if you forget your pass-

word.

32 - English

English - 33

Download from Www.Somanuals.com. All Manuals Search And Download.

Select “RF Output Channel”

Move the selection bar to “RF output Channel”,

then press right to change.

Select “Channel Add/Delete”

Move the selection bar to “Channel Add/Delete,”

then press ENTER to select.

DVD-VIDEO

Channel Add/Delete

Use this feature if Auto Channel Search missed a

channel that you would like to add and delete a channel you

wish to remove.

Open “MENU”

With the DVD in stop mode, press the MENU

button.

RF Output Channel

Change “RF Output CH”

Select channel 3 or 4 using the œ❷ꢀbutton.

Select Channel to Add/Delete

Select “Setup”

Using the œ❷ buttons, move the

Use the CH

buttons to tune in the channel

Then press ENTER to change.

number you wish to add or delete.

selection bar to “Setup” then press ENTER to select.

Use the number buttons to move the channel direct-

ly. If you use the navigation œ❷ button, the chan-

nel will be moved to the next memorized channel.

When you connect the DVD Recorder-VCR to TV with RF

Antenna Cable, follow the steps below to set the

RF output channel.

DVD-VIDEO

Change “TV Channel”

A message will appear on your TV. When the mes-

sage disappears, change your TV to channel 3 or 4

to match the RF output channel of the player.

DVD-VIDEO

Open “MENU”

With the DVD in Stop or Play mode, press the

MENU button.

Select “Setup”

Using the œ❷ buttons, move the selection bar to

Guide Channel Setup

“Setup” then press ENTER to select.

Select “Channel Set”

Using the œ❷ buttons, move the selection bar to

“Channel Set”, then press Enter to select.

Add/Delete Channel.

Press Enter to move the cursor to select Add, then

press ❿ꢀif you want to select Delete. Press ENTER

to confirm your selection.

Select “Channel Set”

Using the œ❷ buttons, move the selection bar to

Set these guide channels so you can use VCR Plus+ codes for

timer recording. Before starting the settings, prepare a chart

showing the channels, station names and guide channels.

DVD-VIDEO

“Channel Set,” then press ENTER to select.

Open “MENU”

With the DVD in stop mode, press the MENU

button.

Select “Setup”

Using the œ❷ buttons, move the selection bar to

“Setup” then press ENTER to select.

34 - English

English - 35

Download from Www.Somanuals.com. All Manuals Search And Download.

Select “Channel Set”

Using the œ❷ buttons, move the selection bar to

Select “VCR”

Using the œ❷ buttons, move the selection bar to

Select “Auto Repeat”

Move the selection bar to “ Auto Repeat”. It sets the

VCR to play a tape repeatedly [unless a tape control

is activated (Stop, Fast Forward or Rewind)].

VCR Setting

“Channel Set”, then press ENTER to select.

“VCR”, then press ENTER to select.

Select “Guide Channel Setup”

Move the selection bar to “Guide Channel Setup”.

If you want your videotapes to play automatically when you

insert them, turn on Auto Play.

Off

ꢀ Only tapes that are missing the Record Safety Tab

will play automatically when inserted.

Note

Select “Tape Length”

Press the RIGHT button to select the Tape Length.

This information is usually printed on the tape box.

The menu cycles through: T-120, T-160 or T-180.

Once the type of cassette is set, the VCR can display

the amount of time remaining on the tape when you

press the INFO. button.

Open “MENU”

With the VCR in Stop or Play mode, press the

Select the guide channel you want

to set.

Video Input

MENU button.

Select “Setup”

Using the œ❷ buttons, move the

selection bar to “Setup” then press ENTER to select.

If you watch video through Line 2, you can choose

Composite or Super(S)-video.

T-120

T-160

T-180

DVD-VIDEO

Open “MENU”

With the DVD Recorder-VCR in stop or play mode,

press the MENU button.

Change “TV Channel”

Using the œ❷ buttons to select the TV channel

corresponding to the guide channel and press

ENTER.

Select “Setup”

Using the œ❷ buttons, move the selection bar to

Select “Auto Play”

Move the selection bar to “Auto Play,” then press

right button to select from the following options:

• On - The VCR will automatically begin playing a

video tape when it is inserted, as long as the

safety tab of the cassette has been removed.

• Off - Auto play is disabled.

“Setup” then press ENTER to select.

* Repeat steps 5 and 6 as necessary.

Select “System”

Use the œ❷ buttons to highlight “System” then

press the ENTER button.

ꢀ Press the Return button to return to the previous

menu.

Note

ꢀ Press the MAIN MENU button to exit the MAIN

menu.

Off

36 - English

English - 37

Download from Www.Somanuals.com. All Manuals Search And Download.

Select “System”

Use the œ❷ buttons to highlight “System” then

Select “Setup”

Using the œ❷ buttons, move the selection bar to

press the ENTER button.

Before Playing

“Setup” then press ENTER to select.

Playback

Read the following information before playing a disc.

This section introduces basic functions of playback

by disc type.

Region code (DVD-Video only)

Both the DVD Recorder-VCR and the discs are

coded by region. These regional codes must

match in order for the disc to play. If the codes

do not match, the disc will not play. The Region

Number for this DVD Recorder-VCR is described

on the rear panel of the DVD Recorder-VCR.

Select “System ”

Using the œ❷ buttons, move the selection bar to

Select “Video Input”

Use the œ❷ buttons to highlight “Video Input”,

then press ENTER button and choose Line 2

(Composite) or S-Video.

DIGITAL

SOUND

Disc types that can be played

“System ” then press ENTER to select.

Disc Types

Disc Logo Recorded content Disc Shape

Max. Playing Time

Dolby Digital

DTS

Digital Audio

about 240

about 480

about 80

about 160

about 74

about 20

Single sided(5”)

Double sided(5”)

Single sided(3.5”)

Double sided(3.5”)

AUDIO + VIDEO

DVD-VIDEO

STEREO

NTSC

NTSC broadcast sys-

tem in U.S.A,

Canada, Korea,

Japan,etc.

Single sided(5”)

Single sided(3.5”)

AUDIO-CD

AUDIO

Stereo

MP3

Single sided(5”)

Single sided(3.5”)

Single sided(5”)

Single sided(3.5”)

JPEG CD-

R/RW

MP3 CD-

R/RW

JPEG Images

MP3 Audio

1(XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 (EP: Extended)

2 (XP: Excellent Quality)

4 (SP: Standard Quality)

8 (LP: Long Playback)

12(EP: Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 (EP: Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 (EP: Extended)

Single sided (5”)

(4.7GB)

•

Before Playing . . . . . . . . . . . . . . . 39

Playing a Disc . . . . . . . . . . . . . . . 40

Using the Search & Skip Functions . 42

Slow Motion Play / Step Motion Play . . 42

About QUICK . . . . . . . . . . . . . . . . . 43

Repeat Play . . . . . . . . . . . . . . . . . 44

Using the A-B Repeat Function . . . . 45

Moving to a Scene Directly . . . . . . 45

Selecting the Subtitle & Audio Language 46

Changing the Camera Angle . . . . . 47

Using Bookmarks . . . . . . . . . . . . . 48

Zooming-In . . . . . . . . . . . . . . . . . 49

Check Remaining Time . . . . . . . . . 50

Using the Disc and Top Menu . . . . 50

Playing Back an Audio CD (CDDA) . 51

Play Option Mode . . . . . . . . . . . . 52

To Program Tracks . . . . . . . . . . . . 53

Photo CD Playback . . . . . . . . . . . 54

Playing back an MP3 CD . . . . . . . 55

Using PIP . . . . . . . . . . . . . . . . . . 56

Playing the VCR . . . . . . . . . . . . . 57

Tracking . . . . . . . . . . . . . . . . . . . 57

Special VCR Playback Features . . 58

S-VHS Playback . . . . . . . . . . . . . . 58

Variable Search System . . . . . . . . 59

DVD-RAM

AUDIO + VIDEO

Double sided (5”)

(9.4GB)

Set “Front Display”

Move the selection bar to “Front Display,” then

press RIGHT button to select from the following

options:

DVD-RW

DVD-R

AUDIO + VIDEO

5” (4.7GB)

• Auto dim – Front Panel Display will dim auto-

matically during power off.

• Bright – Front Panel Display will be bright all the

time.

• Dim – Front Panel Display will be dim all the

time.

Front Display

• You cannot play discs other than those listed above.

• You canot play DVD-RAM discs or non-standardized discs.

etc., even if they may be labeled as above.

• This DVD video player uses the NTSC color system and

cannot play DVD video discs recorded in any other color

system(PAL, SECAM, etc...)

Because of problems and errors that can occur during the

creation of DVD software and/or the manufacture of DVD

discs. Toshiba America Consumer Products. Inc..,

Toshiba Hawaii, Inc, and Toshiba of Canaga, Ltd. cannot

guarantee that this player will play every feature of every

DVD technology, Toshiba DVD players are manufactured to

the highest standards of quality and, as a result, such incom-

patibilities are very rare. If you happen to experience and

difficulty playing a DVD on a Toshiba DVD player, please

feel free to call our contact listed in “How to Obtain

Warranty Services.”

You can set the Front Panel Display to be bright all the time,

dim all the time, dim during power off.

Auto dim

Bright

Dim

Open “ MENU”

With the DVD in Stop or Play mode, press the

MENU button. .

38 - English

English - 39

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OPEN/CLOSE button.

ꢀ Do not move your DVD Recorder-VCR while play-

ing, as this may cause damage to the disc.

ꢀ Make sure to press the OPEN/CLOSE button to

open or close the disc tray.

Discs that cannot be played

CAUTION

Playing a Disc

•DVD-Video with a region number other than “1” or “ALL”

•3.9 GB DVD-R Disc for Authoring.

•DVD-RAM not recorded following the Video

Recording Standard

•Unfinalized DVD-R recorded on other equipment.

•PAL discs

Place a disc gently into the tray with the disc’s label

facing up.

ꢀ Do not push the disc tray while it is being opened

or closed, as this may cause a product malfunction.

ꢀ Do not place foreign materials on or in the disc

tray.

ꢀ Some functions may perform differently or be dis-

abled depending on the disc type. If this occurs,

refer to the instructions written on the disc case.

ꢀ Be especially careful that children's fingers are not

caught between the disc tray and the tray chassis

when it closes.

•DVD-ROM/DVD+RW/PD/MV-Disc/DiVX Video Disc, etc

•Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I

Press OPEN/CLOSE button to close the disc tray.

STANDBY

TV ON STANDBTY

• Your DVD Recorder-VCR closes the disc tray and

plays the disc automatically.

ꢀ This DVD Recorder-VCR can only operate with

• When a recordable media (DVD-RAM, DVD-RW,

DVD-R, etc.) is used, Auto Playback cannot be

activated without pressing the Play button. When

pressing the Power button while a disc is in the

tray, the unit will be activated. Press PLAY to start

playback.

• If you insert MP3 Disc, your DVD Recorder-VCR

will display the file list on the screen and start.

• When a JPEG disc is inserted, folders and a file list

are displayed in the Album format.

discs that are compatible with DVD-RAM Standard

Note

Version 2.0.

TV MUTE

AUDIO

ꢀ After turning power on, it will take a few

seconds until the DVD operates.

ꢀ Playback and/or recording may not work for some

types of discs, or when specific operations, such as

angle change and aspect ratio adjustment, are being

performed. Information about the discs is written in

detail on the box. Please refer to this if necessary

ꢀ Do not allow the disc to become dirty or scratched,

Finger prints, dirt, dust, scratches or deposits of cig-

arette smoke on the recording surface may make it

impossible to use the disc for recording.

100

SELECT

INPUT SEL.

DVD

VCR

VOL

CH / TRK

OPEN/CLOSE

VCR Plus+

/ ADV / SKIP

MARKER

Press the STOP button to stop playback.

ꢀ To protect a DVD-RAM disc from damage, use a car-

tridge.

ꢀ DVD-RAM/R/RW discs may not be able to play on

some DVD players, depending on the player, disc

and the condition of the recording.

ꢀ When you stop disc play, the recorder remembers

where you stopped, so when you press PLAY but-

ton again, it will pick up where you left off. (unless

the disc is removed or the recorder is unplugged,

or if you press the STOP button twice.) This func-

tion is only applicable to DVD-VIDEO, DVD-RAM,

DVD-RW, DVD-R or audio CDs (CD-DA).

RETURN

CLEAR

Note

DISPLAY

REC

VCR SUBTITLE

REC SPEED

REC PAUSE

TIME SLIP

ꢀ Discs with PAL programs recorded on them

cannot be recorded using this product.

DVD

VCR

COPY

PIP

40 - English

English - 41

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-R

Using the Search &

Skip Functions

Slow Motion Play/

Step Motion Play

About QUICK

Title/Chapter/Time/Audio/Repeat/Zoom

(V)

5 / 12

1 / 1

The QUICK functions allows you to easily search for a

desired scene by accessing title, chapter, track and time. You

can also change the subtitle and audio settings and set some

features including Repeat, Angle and Zoom.

00:00:04

Searching through a Chapter or

Track

Slow Motion Play

(DVD-VIDEO/DVD-RAM/DVD RW/

DVD-R)

D 2CH

***

During play, press the SEARCH ➛➛ or ❿❿ button on

the remote control. The playback speed will change as

follows.

During pause mode, press the SEARCH ➛➛ or ❿❿

button on the remote for more than 1 second.

• Each time you press the ❿❿ button :

Press the QUICK button on the remote control during play-

back.

DVD-VIDEO/

PLAY^ꢂFF1/FR1ꢂFF2/FR2ꢂ

FF3/FR3ꢂFF4/FR4ꢂFF5/FR5ꢂ

FF6/FR6

❿❿ Slow X 1/8 ^ꢂ❿❿Slow X 1/4 ꢂ❿❿Slow X 1/2

DVD-RAM/DVD-RW

• Each time you press the ➛➛ button :

DVD-R

DVD-VIDEO

➛➛ Slow X 1/8 ^ꢂ➛➛Slow X 1/4 ꢂ➛➛Slow X 1/2

ꢀ What’s a track?

AUDIO CD(CDDA)

PLAY^ꢂFF1/FR1ꢂFF2/FR2ꢂ

A track is usually a song on a Audio CD

(CDDA) or MP3 disc.

To return to normal speed playback, press the ❿ button.

FF3/FR3

Note

Title/Chapter/Time/Subtitle/Audio/Repeat/Angle/Zoom

• You can scan the program in reverse order.

To return to normal speed playback, press the ❿

button.

ꢀ What’s a chapter?

A title on a DVD disc is usually divided into

chapters.

Step Motion Play

(DVD-VIDEO/DVD-RAM/ DVD-RW/

DVD-R)

ꢀ What’s a title?

A title means usually a film contained on a

DVD disc.

Skipping Chapters or Tracks

ꢀ This may not work for some discs. When an

audio CD(CD-DA) or a MP3 disc is inserted,

depending on the type, the information display

may not be appear.

During pause mode, press the F.ADV button on the

remote.

• Each time the button is pressed, a new frame will

appear.

During play, press the l➛➛ or ❿❿l button on the remote

control.

• If you press the l➛➛ button

If you press the l➛➛ button, it moves to the beginning

of the chapter or track. Pressing the button once again

within 3 seconds returns to the beginning of the pre-

vious chapter or track.

ꢀ Regarding the DVD-Video mode, the Time

Search function does not operate in some discs.

ꢀ To make the screen disappear, press the QUICK

again.

To return to normal speed playback, press the

❿

button.

• If you press the ❿❿l button

If you press the ❿❿l button, it moves to the next chap-

ter or track.

DVD-RAM/DVD-RW

ꢀ No sound is heard during STEP or SLOW mode.

Note

Title/Time/Subtitle/Audio/Repeat/Zoom

Skipping ahead 30 seconds

In play mode, press F.ADV/SKIP button to cue ahead

exactly 30 seconds.

42 - English

English - 43

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Repeat Play

(For Audio CD/MP3)

Repeat Play

Using the A-B Repeat

Function

Moving to a Scene

Directly

Press the QUICK button during playback.

Repeat is highlighted.

You can find the desired scene easily using the QUICK func-

tion.

For DVD-VIDEO/DVD-RAM/ DVD-

RW/DVD-R

Using Repeat Play

(For DVD-VIDEO/DVD-RAM/DVD-

Press ENTER button.

RW/DVD-R)

(DVD-VIDEO only supports chapter repeat.)

Press the QUICK button during playback.

Press the ꢀ❷ button to select the Track or Disc

you want to playback repeatedly. For MP3 discs,

you can select Track, Folder or Disc.

Press the QUICK button.

Press ENTER button.

Repeat play allows you to repeat a track, folder or

the entire disc.

Use ꢀ❷ to select Repeat and use ❿ button

Use ꢀ❷ to select the Title, Chapter or time you

Use ꢀ❷ꢁbuttons to select Repeat and use ❿ꢁ

button to select the Title, Chapter or A-B you want

to play repeatedly.

want to find the desired scene.

to select A-B.

If you want to select a title or chapter, select it using

the ➛❿ buttons. Then, press the ENTER button.

Press ENTER button.

Repeat play allows you to repeat title, chapter or A-B.

• You can enter the desired item directly using the

number buttons.

• To make the screen disappear, press the QUICK or

RETURN button.

Press the ENTER button at the point where you

want the repeat play to start (A) and then press the

ENTER button at the point where you want the

repeat play to Stop (B).

• Your DVD Recorder-VCR will playback the select-

ed section repeatedly.

To return to normal playback

Select Off on the Repeat item or press the CLEAR

button on the remote control.

44 - English

English - 45

Download from Www.Somanuals.com. All Manuals Search And Download.

If you want to move to a desired time, enter the

time in the sequence of hour, minute, and second

using the number buttons and then press the

ENTER button.

Selecting the Audio language

Selecting the Subtitle

Audio Language

Changing the Camera

Angle

Press the QUICK button during playback.

Audio languages and subtitle languages may not work

depending on disc type.

When a DVD contains multiple angles of a particular scene,

you can select the Angle function.

It is available during playback only.

Press the QUICK button when the

"Angle" is shown on the screen during playback.

Selecting the subtitle language

Use ꢀ❷ to select Angle and use ➛❿ button to

select the desired angle.

Press the QUICK button during playback.

Use ꢀ❷ to select Audio and use ➛❿ button to

select the desired audio language.

• Audio languages may be different because they are

disc-specific.

• Some discs allow you to select languages from the

disc menu only.

ꢀThis function is disc-dependent, and may not work

Use ꢀ❷ to select Subtitle and use ➛❿ button to

select the desired subtitle language.

with all DVDs. This function does not work when

Note

a DVD has not been recorded with a multi-camera

angle system.

• If a disc contains subtitles, you can select a desired

subtitle language by pressing the ➛❿ buttons.

• Subtitle display may be different depending on

disc type.

• DVD subtitles may overlap with your TVs subtitles.

If this occurs, disable the caption function on your

TV.

• Some discs allow you to select languages from the

disc menu only.

46 - English

English - 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Bookmarking with DVD-RAM/ DVD-

RW(VR) disc

Clearing a Bookmark

Using Bookmarks

Zooming-In

Press the MARKER button.

• The screen will display “Marker” in place of “Bookmark” if

you are playing a DVD-RAM/DVD-RW(VR).

• Up to 99 scenes can be marked.

Set marks at scenes you want to see again so that you can

start playback from the marked position.

Press the QUICK button during playback.

• If you press the ENTER button during playback, book-

marks are saved in the order of title.

Setting a book mark

Playing Back a Bookmark

Press the MARKER button during playback.

Press the MARKER button.

Press ➛❿ buttons to select a marked scene

you want to delete.

Press the ➛❿ꢁ buttons to select a bookmarked

scene.

Use ꢀ❷ buttons to select Zoom, and then press

Press Clear button to delete the selected

bookmark.

the ENTER button.

•

will be displayed.

Press the ENTER button to start playing from the

selected scene.

Press the ENTER button when the desired scene

appears.

• The number 1 is displayed and the scene is mem-

orized.

Press ❿ button to move to the next position.

Press ꢀ❷➛❿ buttons to move to the area you

ꢀWhen using a DVD-RAM/DVD-RW(VR) the last

want to enlarge.

Marker number added will be deleted.

Note

Press the ENTER button again when the desired

scene appears.

Press the ENTER button.

• The screen will be enlarged to twice the normal

size.

• The number 2 is displayed and the scene is mem-

orized. Repeat above to bookmark other positions.

You can bookmark up to 10 scenes.

• If you press the ENTER button again after the

screen was enlarged to twice the normal size, the

screen size will be enlarged to four times the nor-

mal size.

DVD-VIDEO/

DVD-RAM/DVD-RW/

DVD-R

normal size _ꢁ2X _ꢁ4X _ꢁ2X

_ꢁnormal size

To return to the normal size, press the ENTER but-

ton repeatedly until the screen becomes of normal

size.

48 - English

English - 49

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the TOP MENU button to move to the title

menu of the disc.

Audio CD (CDDA) Screen Elements

Playing Back an Audio

CD (CDDA)

Check Remaining Time

• Use this button if the disc contains more than one

title. Some discs may not support the title menu

functionality.

ꢀ❷ : Select a track (song).

Each disc has a variety of menu functions available.

❿ : Playback the selected track (song).

Press Info button on the remote control.

Following information will be displayed.

(Current deck status, recording speed, remaining

time, input channel, current time.)

For DVD-RAM/DVD-RW/ DVD-R

disc

Insert an audio CD (CDDA) into the disc tray.

ENTER (

) button: Playback the selected track (song).

• The audio CD menu appears and the tracks

(songs) are played back.

Press the TITLE LIST button to display title list.

(❿❿l) button: Playback the next track.

QQuuiicckk

ꢀTitle List : Title refers to a recorded video

stream. Title List shows list to

help you select a title. Since the

title list consists of the informa-

tion on stream that is actually

recorded, if one title is deleted,

that title cannot be played again.

ꢀPlay List : This refers to a unit of playback,

which is made by selecting a

Note

(l➛➛) button: Returns to the beginning of the cur-

rent track when pressed during play-

back.

If you press this button within three

seconds after playback starts, the

previous track will be played. If you

press this button after three

seconds,the current track will be

replayed from the beginning.

Press ꢀ❷ buttons to select the track (song) to start

playback from, and then press the ENTER button.

• You can also select the track (song) by pressing

the number buttons on the remote.

desired scene in the entire Title

List. When one playlist is played,

only the scene selected by the

user will play and then stop.

Since only the information nec-

essary for playing a desired scene

is included in a playlist, even if

that playlist is deleted, the origi-

nal data will not be deleted.

Using the Disc and Top

Some type of discs contains a dedicated menu system that

allows you to select special functions for title, chapter, audio

track, subtitle, film preview, information on characters, etc.

Press and hold the (➛➛/ ❿❿) button: Fast Play

(FF1/FR1, FF2/FR2, FF3/FR3)

Audio CD(CD-DA) Screen Elements

Music

QQuuiicckk

01. TRACK 1

00 :52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

For DVD-VIDEO disc

01/12

Press the DISC MENU button to enter the disc

menu of the disc.

• Move to the setup menu related to playback oper-

ation.

1. Repeat mode: Repeat off/Repeat Track/Repeat

Disc.

2. Current track (song): Displays the number of

the track currently being played.

3. Displays the current play index and total

track num-ber.

• You can select audio language and subtitle etc.

provided by the disc.

4. This shows the operating state of a disc and a

playback time corresponding to a portion that

is currently played.

5. Displays the track list (song list) and the

playing time of each track.

6. Button display.

7. Play Option: Normal, Random, Intro or

Playlist

50 - English

English - 51

Download from Www.Somanuals.com. All Manuals Search And Download.

• Intro :

The first 10 seconds of each track is

Press the ENTER button.

played. If you press the ❿ button

The Playlist screen will appear.

Select tracks in the order in which you want

them to play using theꢀ❷buttons. Press the

ENTER button.

during Intro play, Normal Play will

be performed from the track cur-

rently playing. When Intro Play is

completed, Normal Play is per-

formed.

To Program Tracks

Play Option Mode

• Playlist :

The Playlist playback option allows

you to select the order in which you

want tracks to play.

Music

Playlist

QQuuiicckk

Press the QUICK button during playback.

Repeat mode will be highlighted.

You can register a maximum 30 tracks in the playlist.

ꢀThe same can be used with a Mp3 disc.

Music

QQuuiicckk

Note

00 :52

03_L.I.E

Press the QUICK button.

Repeat Mode will be highlighted.

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

Normal

Play Option

Music

QQuuiicckk

01/12

Press the PLAY button to playback playlist.

If you playlisted a wrong track, select the

01. TRACK 1

00 :52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

RETURN

wrong track using the ꢀ❷buttons and press the

01/12

• During Playback, repeat mode will be highlighted.

• During Stop, Play option will be highlighted.

CLEAR button.

The wrong track will be removed.

QQuuiicckk

Select Play Option Mode using the ➛❿ buttons

and press the ENTER button.

To change repeat mode

• The play option screen will appear.

Select Play Option using the ➛❿buttons.

Press QUICK during Play to highlight Repeat Mode.

Press ENTER when Repeat Mode is highlighted.

• A screen allowing you to change the repeat mode

(Off, Disc, Track) will appear.

Music

QQuuiicckk

Music

00 :52

03_L.I.E

QQuuiicckk

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

01. TRACK 1

00 :32

01. TRACK 1

02. TRACK 2

4:39

4:31

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:30

3:53

4:23

4:24

Repeat

Off

01/12

RETURN

Select a desired play option using the ꢀ❷ buttons

Press the ENTER button.

and press the ENTER button.

The play option screen will appear.

Select Playlist using the ꢀ❷buttons.

• Normal :

Tracks on a disc are played in the

order in which they were recorded

on the disc.

• Random : The Random option plays a disc’s

tracks in random order. After a ran-

dom list is generated and played

completely, another random list is

generated and played.

Playlist

Play Option

Ramdom Play continues until the

play option is changed.

52 - English

English - 53

Download from Www.Somanuals.com. All Manuals Search And Download.

RETURN (

) button:

Use the ➛❿ buttons to select clips menu and then

press the ENTER button.

Moves to the parent of the folder to which the cur-

rent song belongs.

Playing back an MP3

Photo CD Playback

Returns to the Album screen.

The unit enters slide show mode. Before

the slide show can begin, the photo interval

(slide show speed) must be set

(❿❿l) button: Playbacks the next track.

Each title the ENTER button is speed, the

picture rotates 90 degree clockwise.

Insert an MP3 CD into the disc tray.

• The MP3 menu is displayed and the tracks

(songs) are played back.

Insert a photo CD (JPEG) into the disc tray.

Each time ENTER button is pressed, the

photo is enlarged up to 4X.

(l➛➛) button: Returns to the beginning of the cur-

rent track when it is pressed during playback. If it is

pressed again, your DVD Recorder-VCR plays back

the previous track.

(Normal ^ꢁ2X ꢁ4X ꢁ2X ꢁNormal)

Music

MP3

QQuuiicckk

The screen shown below will appear automatically.

00 : 25

03_L.I.E

(Press ❿ button to switch to slide show mode.)

DJDOC

KIMHJ

Seotaiji2

SES

When using a combination

MP3/JPEG disc

DJDOC

05/16

YOUNG

01_INTRO(####)

When using a combination

MP3/JPEG disc

If you want to listen to MP3 files, but you're

currently in Photo mode, press STOP button twice

and then press MENU button to bring up the Menu

screen.

RETURN

If you want to watch Photo files, but you're current-

ly in MP3 mode, press STOP button twice and then

press MENU button to bring up the Menu screen.

Press the ꢀ❷ buttons to select the folder you want

to hear, and then press the ENTER button.

• Press the ꢀ❷ buttons to select the track (song)

you want to hear, and then press the ENTER but-

ton.

Select Music using the ꢀ❷ buttons then press the

❿ or ENTER button. MP3 screen will be shown.

To see the next 6 pictures, press the ❿❿l button.

To see the previous 6 pictures, press the l➛➛ button.

• You can also select the desired track (song) by

pressing the number buttons on the remote.

Select Photo using the ꢀ❷ buttons then press the

❿ or ENTER button. Photo screen will be shown.

Select Photo using ꢀ❷ buttons, then press the

ENTER button.

Buttons on the Remote

ꢀ❷ : Selects a track (song).

❿ : Playback the selected track (song).

ENTER (

) button:

Playbacks the selected track (song) or displays the

files in the selected folder.

54 - English

English - 55

Download from Www.Somanuals.com. All Manuals Search And Download.

Deactivating PIP

Tracking

Using PIP

Playing the VCR

Press the PIP button again.

• PIP will be deactivated.

The Tracking adjustment removes almost the white lines

that sometimes appear during playback because of slight dif-

ferences in recording decks. The TRK button will automati-

cally align the recorded tracks with the playback heads to

solve this problem. You may also set tracking manually.

The PIP function allows you to view a sub screen together

with the main screen in DVD mode.

To play a standard VHS videotape, just insert it into the

VCR deck and press the PLAY button. You can turn on the

Auto Play to enable the VCR deck to play automatically

when you insert a videotape that is missing the Record

Safety Tab. See pages 36~37.

You can watch both DVD and TV together.

ꢀPIP does not work in VCR mode.

Note

Adjust Tracking Manually

During playback, press the CH/TRK

buttons to remove white lines from the picture.

Press the PIP button.

• The current disc is played back on the PIP screen

located at the bottom of the screen.

Insert VHS Tape

Insert a standard VHS videotape into the VCR deck.

• When a videotape is inserted, power will turn on

automatically.

Play Tape

Press the

❿

(PLAY/PAUSE) button on the remote

control or on the front panel of the unit. The video-

tape will begin to play automatically if it is missing

the Record Safety Tab and Auto Play is turned on.

See pages 36~37.

Switching between the PIP and

main screens

Stop Playback

Press the PIP button again.

Press the

ꢀ(STOP) button on the remote control or

on the front panel of the unit.

• The main and PIP screen will be switched.

56 - English

English - 57

Download from Www.Somanuals.com. All Manuals Search And Download.

End search

Use this feature when you want to search for a blank

position to record a program on a cassette. While a

cassette is stopped, press the QUICK button. The

VCR will fast forward, searching for a blank position,

and then automatically stop at that position. If the

VCR reaches the end of the tape during end search,

the tape will be ejected.

S-VHS Playback

Variable Search

System

Special VCR Playback

Features

The DVD Recorder-VCR allows you to playback high quali-

ty S-VHS tapes.

While a videotape is playing, you can enjoy a variety of spe-

cial playback features, including Still, Frame Advance, Skip,

Slow motion, and more. Press the Play button again to

resume normal playback.

Press the QUICK button to display the search screen in

the stop mode. When a program is recorded, the starting

point is given an Index mark for easy location. However, the

VHS Index Search System (VISS) cannot recognize index

marks made by old VCRs. If the VCR has trouble finding a

mark, it is probably because the cassette was recorded on a

VCR without VISS. If you want to index two programs in a

row, set your VCR to stop, then start recording each

program.

Scan and play

Use scan and play when you don’t know exactly

where a program is located on a cassette tape.

Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

Pause

- Forward Intro Scan

Highlight “Forward Intro Scan”, then press the

ENTER button.

In Play mode, press ❿ (PLAY/PAUSE) to still a sin-

gle frame.

- Reverse Intro Scan

Highlight “Reverse Intro Scan”, then press the

ENTER button.

Start Playback

Press

❿

(PLAY/PAUSE) on the remote control to

Frame Advance

In the pause mode, press F.ADV/SKIP to

advance to the next frame.

begin playback of the S-VHS tape.

1 ^{Go to [0:00:00] stop}

Use this feature when you want to search for the

[0:00:00] counter position on a cassette. Press the

CLEAR button at the point on the tape where you

want to set the counter to [0:00:00].

While a cassette is stopped, press the QUICK but-

ton. The VCR will rewind or fast forward, search-

ing for the [0:00:00] counter position, and then

automatically stop at that position.

Fps/Review

In Play mode, press Forward (❿❿) or

Rewind (➛➛) to Cue/review at two speeds:

• Picture Search — Press and release to advance the

tape forward or backward at 5 times normal

speed.

• Jet Search — Press and hold to advance the tape

forward or backward at 7 times normal speed.

Skip

In Play mode, press F.ADV/SKIP to cue ahead exactly

30 seconds. Press F.ADV/SKIP repeatedly up to 4

times to cue ahead 2 minutes.

Slow motion

In pause mode, press ❿❿ button for slow motion.

Press the press ❿❿ button repeatedly to vary slow

motion speed from 1/5 to 1/30 of normal playback.

Press the PLAY button twice to resume normal

viewing.

58 - English

English - 59

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀFinalize

- This closes the DVD-R/RW so no additional

recording can be done.

ꢀUnfinalize

DVD-RW( Video mode)/-R

Note

Before Recording

• This mode automatically creates chapters at specified

intervals during finalization.

• Simple editing (erasing titles/changing title name).

- This allows additional recording on a finalized

Recording

DVD-RW disc.

- A DVD-RW disc that has been recorded by DAO

in a PC cannot be unfinalized.

- A DVD-RW disc that has been recorded in Video

Mode of a different maker’s recorder and other

Toshiba model cannot be unfinalized.

- A DVD-R disc cannot be unfinalized.

DVD-RW(VR mode)/-RAM

This unit can record on various types of discs. Before

recording, read the following instructions and select the disc

type according to your preference.

• This mode involves multiple editing functions (such as

deletion of a whole title, partial deletion of a title,

etc.).

Recordable discs

• Various editing options using a created Playlist.

This section shows various DVD recording methods.

Recording Formats

This recorder can record on the following discs.

Unrecordable pictures

When you insert an unused disc, the following message

appears. Since available functions differ depending on the

disc type, select a disc that best fits your preferences.

DVD-RAM: Use after formatting the disc.

DVD-RAM

DVD-RW

DVD-R

Pictures with copy protection cannot be recorded on this

DVD Recorder-VCR.

When the DVD Recorder-VCR receives a copy guard

signal while recording, recording stops and the following

message appears on the screen.

Unformatted Disc

•DVD-RWs and DVD-RAMs are rewritable.

•DVD-Rs are non-rewritable.

Do you want to format this disc?

Yes

This can be due, among other reasons, to problems and

errors that can occur during the creation or recording of

DVD and other software and the manufacture of software

discs (including blank discs).

Moreover, because of variations in the quality of discs, this

recorder may not be able to record on all discs that bear a

DVD-RAM, DVD-R or DVD-RW logo, but you should not

encounter difficulty if you use only high quality recordable

DVD discs.

You cannot record copy protected movie.

DVD-RW: When unused DVD-RW disc is first inserted, the

message "Do you want to intialize this disc" will

be displayed. If you select Yes, the disc will be for-

matted in VR mode. If you want to change the

mode, refer to Formatting a Disc on page 91.

Concerning copy control signals.

If you happen to encounter difficulties playing or recording

a DVD disc of playing a CD disc, please feel free to call our

Customer Service Hotline at 1-800-319-6684.

•

Before Recording . . . . . . . . . . . . . 60

Recording the current channel you are

watching . . . . . . . . . . . . . . . . . . . 62

Making a One Touch Recording

Broadcasts that contain copy control signals may have one

of the following three signal types, Copy-Free, Copy-Once

and Copy-Never. If you want to record a copy-once type

program, use DVD-RW with CPRM in VR Mode and DVD-

RAM.

Compatibility between the DVD Recorder-VCR and

Other Company’s Recorder.

•

Uninitiallized Disc

Do you want to initialize this disc?

(OTR) . . . . . . . . . . . . . . . . . . . . . 63

VCR Plus+ Record . . . . . . . . . . . . . . 63

Making a Timer Recording . . . . . . . . 64

Editing Timer Record List . . . . . . . 66

Deleting a Timer Recording Entry . . 67

Watching the Images Being Recorded

(Time Slip) . . . . . . . . . . . . . . . . . . 68

Additional Recording in

the DVD Recorder-VCR

Disc Types

Recording

format

Recording Device Finalizing

Yes

•

Copy-Free

Yes

Copy-Once

Copy-Never

Toshiba

Recordable

DVD-RAM

VR Mode

Other Company

DVD-RW(Ver.1.1)

with CPRM

finalized

not finalized

finalized

not finalized

finalized

Not recordable

Recordable

Not recordable

Recordable

Toshiba

Other Company

DVD-RW

Yes*

Disc Name

Yes

VR mode

Not recordable

Recordable (D-VR3)

Not Recordable (Other

Toshiba Models)

Video mode

•

Recording From External Devices

Toshiba

V Mode

Mana

Choose the recording format for DVD-RW.

not finalized

Recording through a DV Input jack . . . 69

Basic VCR Recording . . . . . . . . . . 69

Special Recording Features . . . . . . 70

Record Speed . . . . . . . . . . . . . . . . 70

Copy to DVD or VCR . . . . . . . . . . 71

DVD-R (For General Ver.2.0)

DVD-RAM (Ver.2.1)

Yes*

finalized

not finalized

finalized

Not recordable

Recordable (D-VR3)

Not Recordable (Other

Toshiba Models)

DVD-VR

DVD-V

Other Company

Toshiba

Once “Copy Once” has been recorded, additional recording

cannot be performed.

DVD-R

not finalized

This * marked parts are compatible with CPRM.

DVD-R: Formatting DVD is unnecessary and only Video

Mode Recording is supported.

finalized

Not recordable

Other Company

not finalized

60 - English

English - 61

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the REC button.

• ꢂ/ꢀis displayed on the screen and recording

begins.

Recording the current

channel you are watching

Making One Touch

Recording (OTR)

VCR Plus+ Record

Press the STOP button to stop or finish a recording

in progress.

DVD-RAM DVD-RW

DVD-R

DVD-RAM DVD-RW

DVD-R

DVD-RAM DVD-RW

DVD-R

• The message “Updating the information of disc.

Please wait for a moment”.

One-Touch Recording (OTR) allows you to add recording

time in 30-minute increments up to 4 hours at the touch of

a button.

1. Check the antenna cable is connected.

2. Check the remaining time of the disc.

3. Check the date and time are correct.

Make sure the Clock has been set (Setup - System Setting)

before you proceed with a timer recording.

1. Check the antenna cable is connected.

2. Check the remaining time of disc.

DVD-RAM/DVD-RW/DVD-R discs should be formatted in

advance before beginning recording. Most new discs are

sold unformatted. Make sure to format your unformatted

discs before recording.

Pausing / Resuming

Insert the disc.

• Press the REC PAUSE button to pause a recording in

progress.

Press the MENU button.

Use the channel

button or number

• Press the ꢀ❷ buttons to select Timer Rec and

then press the ENTER or ❿button.

buttons to select the channel to record.

Press the OPEN/CLOSE button and place a record-

• Press the REC PAUSE button again during pause to

resume recording.

able disc on the disc tray.

• CATV channel: 1 to 125

• Select VCR Plus+ Record

• TV channel: 2 to 69

• You can switch channels by pressing the CH

buttons while recording pauses.

DVD-RAM(VR)

Setup

Timer Record

Press the CHANNEL

button to select

VCR Plus+ Record

Timer Record

the channel you want to record.

Start Recording.

Follow the instructions on page 62 to begin record-

ing.

Timer Rec.

Scheduled Record List

ꢀYou can’t change the recording mode and channel

during recording.

Copy

Title List

Playlist

Note

ꢀRecording will stop automatically if there is not

enough space for recording.

Press the REC Speed button on remote control, to

select the recording speed (quality).

Disc Manager

MOVE

ꢀUp to 99 titles can be recorded onto a disc.

ꢀIf the power interrupted due to power failure or

other reasons, the title being recorded will not be

saved onto the disc.

SELECT

RETURN

EXIT

• XP(High, approx. 1 hour) ^ꢁSP(Standard, approx.

2 hours) ^ꢁLP(Low, approx. 4 hours) EP(Extended

Play, approx 6 hours)

Activate OTR.

While in Record mode, press the REC button again

to activate One-Touch Recording (OTR).

• If the current time is not set. Set the current time first.

Enter VCR Plus+ Code number.

ꢀRecording will stop automatically if a copy protect-

ed image is input.

• Record length 0:30 appears on the On-Screen

Display and the DVD Recorder-VCR will record

for exactly 30 minutes.

RAM

ꢀDo not use DVD-R authoring discs with this unit.

DVD-RAM(VR)

Setup

VCR Plus+ Record

Timer Rec.

Enter VCR plus+ Code number. [0-9]

Add Recording Time.

Continue pressing REC to add recording time in 30

minute increments up to 4 hours.

Copy

Title List

Playlist

• The DVD Recorder-VCR stops recording automat-

ically when the time has elapsed.

Disc Manager

MOVE

SELECT

RETURN

EXIT

DVD-RAM(VR)

Setup

VCR Plus+ Record

Timer Rec.

Enter VCR plus+ Code number. [0-9]

Copy

Title List

Playlist

Disc Manager

MOVE

SELECT

RETURN

EXIT

62 - English

English - 63

Download from Www.Somanuals.com. All Manuals Search And Download.

• The Timer Recording screen is displayed.

If you enter VCR Plus+ Code number correctly.,

all recording informations will be set

automatically.

Set timer recording option.

• The Timer Recording screen is displayed. Fill the

input items using the arrow buttons.

Press the ENTER button.

•

will appear on the front panel. It means that a

timer recording is registered.

Making a Timer Recording

➛❿: Moves to the previous/next item,

ꢀ❷: Sets a value.

If you make a mistake

Press the ➛❿ꢁbutton to select the item you want to

change.

Scheduled Record List

• TO : Select the media to record DVD or VCR.

• SOURCE : The video input source (L1 or L2), or

the broadcasting channel you want to

make a timer recording from.

• Date : Set the recording day.

• Start/End Time : Start and end time of the timer

recording.

• Type (Recording cycle).

Once : Records once.

Weekly : Records at a set time every week.

Daily : Records at a set time every day.

• Mode (Recording mode).

If the timer settings overlap

Edit

No.01

Source 01:34

The programs are recorded in order of priority. If

timer recording is set for the first program and then

again for the second program and both programs

overlap, the following message will appear on the

screen: “This setting is identical with 1”

The message shows that the first program has priori-

ty. After recording of the first program is complete,

the second program starts being recorded.

DVD-RAM DVD-RW

DVD-R

01/04

Date

12 01 AM

once

EXIT

02 01

Start

Type

End

1. Check the antenna cable is connected.

2. Check the remaining time of the disc.

3. Check the date and time are correct.

Make sure the Clock has been set (Setup - System Setting)

before you proceed with a timer recording.

Modo

MOVE

SELECT

RETURN

To exit without saving the current setting

Press the MENU or TIMER REC button.

After check if all record information is right, press

ENTER button.

To return to the previous menu

Press the RETURN button if you don’t want to set a

timer recording.

Press the MENU button.

! Press the MENU button.

@ Press theꢀ❷ buttons to select Timer Rec., and

then press the ENTER or ❿ button.

# Select Timer record.

Scheduled Record List

DVD-RAM(VR)

DVD

Date

Edit

No.

Source

Start

End

Type Mode

AUTO : Select when you want to set video quality automati-

cally. It depends on the remaining time on the DVD.

12:10AM Once

01 DVD CH 34 01/04 07:55PM

Turn the power off to finish the timer recording.

• If the current time is not set. Set the current time

first.

•

will blink if disc or tape is not inserted.

XP (high quality) : Select when audio and video qualities are

important. (Approx. 1 hour)

DVD-RAM(VR)

Setup

Timer Record

SP (standard quality) : Select to record in standard quality.

(Approx. 2 hours)

VCR Plus+ Record

Timer Record

MOVER

SELECC.

VOLVER

SALIDA

Timer Rec.

LP (low quality) : Select when a long recording time is

required.(Approx. 4 hours)

Scheduled Record List

ꢀThe timer recording time may differ from the set

time depending on disc status and overall timer

recording status (for example, recording times

overlapping, or when the previous recording ends

within 2 minutes before the start time of the next

recording.)

Copy

Title List

Playlist

Note

EP (extended mode) : Select when a longer recording time is

required. (Approx.6 hours about 1.2

Mbps)

Disc Manager

MOVE

SELECT

RETURN

EXIT

VCR

AUTO : Select when you want to set video quality automati-

cally. It depends on remaining time of VCR tape.

SP : Standard Play, for best picture quality and for long

preservation.

Source

SLP : Super Long Play, for maximum recording time (3

times SP).

64 - English

English - 65

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select the number of the

timer recording you want to edit, and then press the

ENTER or ❿ button.

Press the ꢀ❷ button to select Delete, and then

press the ENTER button.

• You will be prompted with the delete confirm

message such as ‘Do you want to delete No.02?’.

Editing Timer Record List

Deleting a Timer Recording

Entry

• The Edit and Delete items are displayed.

Press the ➛❿ buttons to select Yes, and then press

the ENTER button.

• The selected entry will be deleted from the list.

DVD-RAM DVD-RW

DVD-R

DVD-RAM DVD-RW

DVD-R

Follow these directions to delete an entry from the timer

record list.

Follow these directions to edit the timer record list.

Press the MENU button after finishing the opera-

tion. The menu screen will disappear.

Editing the settings for a timer

recording

Press the MENU button.

Press the ꢀ❷ button to select Edit, and then press

the ENTER button.

Press the MENU button.

Press the ꢀ❷ button to select Timer Rec., and

then press the ENTER or ❿ button.

• The Timer Recording screen is displayed.

Edit the items you want to modify. See the Timer

Recording section for more information on Timer

Recording Input items.

Press the ꢀ❷ button to select scheduled Record

Press the ꢀ❷ button to select Timer Rec., and then

List, and then press the ENTER or ❿ button.

press the ENTER or ❿ button.

DVD-RAM(VR)

Setup

Timer Record

DVD-RW(VR)

VCR Plus+ Record

Timer Record

Timer Rec.

Scheduled Record List

09:22AM 10:30AM Once

CH 09 11/22

CH 05 12/10

Copy

Title List

Playlist

12:30AM 09:00AM Weekly LP

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the ENTER button to confirm the edited set-

ting.

Press the ꢀ❷ button to select scheduled Record

List, and then press the ENTER or ❿ button.

Press the ꢀ❷ button to select the number of the

timer recording you want to delete, and then press

the ENTER button.

• The Edit and Delete items are displayed.

DVD-RW(VR)

09:22AM 10:30AM Once

12:30AM 09:00AM Weekly

CH 09 11/22

CH 05 12/10

66 - English

English - 67

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the Images

Being Recorded (Time Slip)

Recording From

External Devices

Recording through a DV

input jack

Basic VCR Recording

DVD-RAM

Follow these directions to record onto a disc or tape the

outputs of a camcorder that has a DV output jack.

Follow these directions to record onto a disc or a tape

from External Devices.

Before starting

1. Check TV channel and Antenna connections.

2. Check the remaining time on the tape.

This function allows you to watch the recently recorded 10-

second images on the PIP screen while a recording is in

progress.

You can record a TV show in progress by inserting a blank

tape and pressing the ꢂ(REC) button. You can even add

time in 30-minute increments up to 4 hours by pressing the

ꢂ(REC)button repeatedly; see page 63.

Connect the DV output jack of your camcorder to

the DV input jack on the front of your DVD

Recorder-VCR using a DV cable.

Connect the Line out jack of your External

Devices to the Line IN jack on the front or

rear of your DVD Recorder-VCR using

Audio/Video Cable.

Press the TIME SLIP button on the remote control.

• The recently recorded 10-second images are

played back on the PIP screen.

Power on your DVD Recorder-VCR and switch to

DV mode by pressing the INPUT SEL. on the

remote. Insert the disc.

• This function starts to operate 10 seconds from

the time you press the REC button.

ꢀ Be sure your videotape has a Record Safety Tab. If

Power on your DVD Recorder-VCR and

switch to Line In mode by pressing the

INPUT SEL on the remote .

The front panel display changes on the

following sequence

the tab is missing, you can cover the opening with

• On the TIME SLIP screen, you can playback,

scan, or perform other operations for the recorded

program using the playback related buttons.

Press the ➛➛button to scan the recording in the

reverse order, from the end to the start.

Press the ❿❿button to scan to the recently

recorded 10- second images.

Note

a small piece of tape. Do not cover this opening

unless you are sure you want to record over the

tape.

With your DVD Recorder-VCR stopped, set the

operation mode of your camcorder to play mode.

ꢁChannel Number ꢁ L1 ꢁ L2ꢁ DV

Insert Tape

Insert a blank VHS tape into the VCR deck.

When your DVD Recorder-VCR is in the

stop state, set the operation mode of your

External Devices to play mode.

• Make sure the tape is long enough to record the

entire program.

Press the REC button on your DVD Recorder-VCR

when the image from which you want to start

recording is displayed.

Press the STOP button once to clear the TIME SLIP

function.

To change the Recording Speed, see page 70.

• To stop a recording while a TIME SLIP function is

in progress, press the STOP button twice.

Press the REC button on your DVD

Recorder-VCR when the image from which

you want to start recording is displayed.

Select a Channel to Record

Use the 0–9 buttons or the Channel UP/DOWN

arrow buttons to select the desired channel, or press

the INPUT SEL. button to select Line 1, Line 2 or

DV if recording from an external device connected

to the front or rear Line inputs, respectively.

Press the STOP button on your DVD Recorder-VCR

when the recording is finished.

Press the STOP button on your DVD

Recorder-VCR when the recording is finished.

ꢀSome camcorders may not work with your DVD

Recorder-VCR even if they have a DV output jack.

Note

ꢀ Also refer to the user manual for your camcorder

Start Recording

Press the ꢂ(REC) button on the remote control or

front panel.

For options while recording is in progress, see

“Special Recording Features”.

ꢀAlso refer to the user manual for your External

when recording through a DV jack.

Devices when recording through Line In mode

Note

using Audio/Video cable.

ꢀThe Time Slip feature only works with DVD-RAM

discs.

Note

Pause/Resume Recording

Press the ꢃ(REC/PAUSE) button.

Press ꢂ(REC) again to resume.

Stop Recording

Press the ꢀ(STOP) button.

68 - English

English - 69

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-RAM(VR)

Edit Copylist

Special Recording

Features

Record Speed

Copy to DVD or VCR

---/00/2000 1 00:00:44

---/00/2000 12:00 PM

1 Scene

00/00/00 12:00:00 PM

While a recording is in progress, you can watch a different

channel, watch a different media, or add recording time in

30-minute increments.

You can slow down the recording speed from SP to SLP in

order to fit six hours of programming on a T-120 tape.

DVD-RAM DVD-RW

DVD-R

You can copy DVD to VCR or VCR to DVD.

Press MENU button and select Copy.

Watch a Different Channel

Press the TV/VCR button on the remote to switch to

your TV tuner, then select a different channel on

your television.

Start Recording

Follow the Basic Recording instructions on page 69.

Select the Copylist, you want to

copy

using the ꢀ❷ buttons and then press ❿ button.

DVD-RAM(VR)

Copy

To copy play list, select “Copy”.

DVD --> VCR

VCR --> DVD

Set Record Speed

Press the REC SPEED button on the remote control

to set the Record Speed to one of the following

options:

Edit Copylist

DVD-RAM(VR)

Watch a different media during

recording

---/00/2000 1P0l0a:y00:44

You can watch DVD during VCR recording or watch

Video tape during DVD recording.

• During VCR recording, insert a DVD in the DVD

deck. The output will automatically change to the

DVD and start playback.

• During DVD recording, insert a Video tape in the

VCR deck. The output will automatically change

to the VCR and start playback. (Only if tape is

missing the safety tab)

Rename

Edit Scene

Copy

• SP – Standard Play, for best picture quality.

Disc Manager

Delete

---/00/2000 12:00 PM

1 Scene

• SLP – Super Long Play, for maximum recording

time (3 times SP).

00/00/00 12:00:00 PM

DVD to VCR

ꢀThe selected Record Speed will appear on the front

panel display and on-screen display.

Note

Select DVD --> VCR to copy DVD

to VCR.

• Check the remaining time on the tape.

Add Recording Time

Refer to the One-Touch Recording (OTR).

Direct copy DVD to VCR

Maximum Recording Time - SP vs. SLP

Recording DVD and VCR at the

Insert DVD disc you want to copy.

Tape Length SP (Standard Play) SLP (Super Long Play)

same time

If you want to copy from the

You can record DVD and VCR at the same time, but

both modes must be set up to record separately.

• Press the DVD/VCR button to set the unit to DVD

or VCR mode.

• Choose Line input mode (Ch, Line1, Line2 or DV).

for DVD or VCR.

T-120

T-160

T-180

2 hrs

2hrs 40 mins

3 hrs

6 hrs

8 hrs

9 hrs

Copylist, choose “Edit Copylist”.

• To copy from “Edit Copylist”, you need to make a

Copylist. To make and select a “New Copylist”

(See pages 81~82).

Insert VHS tape.

• If you want to copy directly, choose “Direct

Copy”.

• Choose REC mode for DVD or VCR.

• Press REC button for DVD or VCR.

Press VCR copy button on front panel or remote

control.

ꢀWhen you watch or record on the VCR

during DVD Recording, some function buttons

may not operate.

Note

DVD-RAM(VR)

DVD-->VCR

New Copylist

ꢀWhen DVD Recorder-VCR is connected to TV

The message “This function is not available.” will

be displayed.

Edit Copylist

Direct Copy

using S-Video or component video cable, the

To stop recording press the stop button.

• You can only use the Direct Copy feature on

DVD-R and DVD-RW(V) discs.

Note

playback screen on the video tape will not display

during DVD recording.

ꢀSP(Standard Play) is for best picture quality.

ꢀSLP(Super Long Play) is for maximum recording

time.

• The pause button is not effective in the Copylist.

ꢀYou cannot record different channel at the same

time.

Disc Manager

ꢀThe DVD and VCR cannot start recording at the

exact same time. You must set one mode to start

recording, then the other.

70 - English

English - 71

Download from Www.Somanuals.com. All Manuals Search And Download.

Press Enter button to choose the

list you want to copy.

VCR to DVD

Viewing the Menu

Functions for a Disc

Select VCR --> DVD to copy VCR

to DVD.

VCR --> DVD scene will be displayed.

DVD-RAM(VR)

VCR-->DVD

End

Editing

Start

00:00:21 00:01:04

--:--:-- --:--:--

• Check the remaining time on the disc.

DVD-RAM DVD-RW

DVD-R

DVD-RAM(VR)

Copy

00:01:10

PLAY

There are a variety of menu functions depending on the disc

type. Press the MENU button.

DVD --> VCR

VCR --> DVD

Copy All

To copy Copylist, select “Copy”.

No Disc

Disc Manager

VCR-->DVD

End

DVD-RAM(VR)

No Disc

Start

00:00:21

--:--:--

Play

Copy

Delete

Setup

Press ENTER button to select the

start position.

Timer Rec.

00:00:43

PLAY

You can use ❿ , l➛➛ or ❿❿l,➛➛or ❿❿ buttons to

search for the Start position.

Copy All

VCR-->DVD

End

DVD-RAM(VR)

• The VCR will fast forward, searching for a start

position and then automatically start a copy.

Start

00:00:21

--:--:--

• It may not be match up with Start and END point

exactly.

00:00:25

PLAY

• If you want to copy all content, select “Copy All”.

DVD-VIDEO

Copy All

DVD-VIDEO

Direct copy VCR to DVD

Setup

•

Viewing the Menu Functions for a Disc 73

Viewing Title List . . . . . . . . . . . . . 75

Playing a Title List Entry . . . . . . . . 76

Renaming a Title List Entry . . . . . . . 77

Deleting a Title List Entry . . . . . . 78

Locking a Title List Entry . . . . . . . 79

Deleting a Section from a Title List

Entry . . . . . . . . . . . . . . . . . . . . . . 80

Creating a Playlist Entry . . . . . . . . . . . . . 81

Editing a Playlist Entry . . . . . . . . . 83

Editing Scene for a Playlist Entry . 84

Copying a Playlist Entry to the VCR . . 88

Deleting a Playlist Entry from the

Timer Rec.

Title Menu

Disc Menu

Select the End position in the same

way.

A copylist will be generated.

Insert the VHS tape you want to copy.

• In VCR mode, the copylist cannot be saved.

Insert Recordable DVD disc.

VCR-->DVD

End

DVD-RAM(VR)

Start

00:00:21 00:01:04

--:--:-- --:--:--

•

Press DVD copy button on front panel or remote

control.

00:01:04

PLAY

Copy All

To stop recording press the stop button.

Playlist . . . . . . . . . . . . . . . . . . . . . 88

Disc Manager . . . . . . . . . . . . . . . . 89

•

72 - English

English - 73

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select Title List, and then

press the ENTER or ❿ button,

DVD-RW(VR)

or press the TITLE button on the remote control.

• The Title List screen is displayed.

Viewing Title List

DVD-RW(VR)

Setup

# $

Timer Rec.

Copy

Setup

Timer Rec.

Title List

Playlist

DVD-RAM DVD-RW

DVD-R

00:00:21

00:00:03

00:00:15

00:00:18

00:06:32

00:08:16

00:09:36

Disc Manager

You can playback the recorded titles, edit a title name, edit

record list entries and lock or unlock the record list.

Sport

Movie

02/01/01

00:25:30(PM)

Insert the recorded disc.

Press the MENU button.

JPEG+MP3

DVD-R(V)

! Playback screen for recorded entry.

@ Information window for the selected entry: Title

name, recording date, recording time, lock sta-

tus, recording mode.

DVD-R(V)

Setup

# Recorded entry No.

Timer Rec.

Copy

Timer Rec.

Photo

$ Recorded entry title.

% Recording duration (i.e., playtime).

^ Record list edit items.

& Button display.

Title List

Music

Disc Manager

DVD-RAM(VR)

Record List edit items

ꢀPress the MENU button again to hide the menu

screen. You can configure the settings on the Setup

screen using the arrow and ENTER buttons.

ꢀIf recording or editing could have been finished

properly because of any kinds of error, such as

sudden power failure, The recording or editing

might have not been done. Please be aware that a

material that has been damaged is unable retrieved

to its original content.

Note

DVD-RAM(VR)

Setup

Press the ꢀ❷ button to select an entry to edit, and

then press the ENTER or ❿ button.

Timer Rec.

Copy

• Play : Playbacks the selected entry.

Title List

Playlist

• Rename : Renames the title of the selected entry.

• Delete : Deletes the selected entry from the list.

Disc Manager

ꢀTitle List : Title refers to a recorded video stream.

• Edit : Deletes a desired section.

(DVD-RAM/DVD-RW(VR mode)

Title List shows a list to help you select

Note

a title. Since the title list consists of the

information on data that is actually

recorded, if one title is deleted, that title

cannot be played again.

• Protect : Locks or unlocks the selected entry.

Press the MENU button after the operation is finished.

The menu screen will disappear.

74 - English

English - 75

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select Play, and then press

Press the ꢀ❷ button to select Rename, and then

the ENTER button.

press the ENTER button.

• The selected entry (title) will be played back.

• The Rename screen is displayed.

Renaming a Title List

Entry

Playing a Title List Entry

DVD-RAM(VR)

ꢀYou can also playback a recorded program by

pressing the QUICK button and using the title,

chapter or time items.

Note

DVD-RAM DVD-RW

DVD-R

DVD-RAM DVD-RW

DVD-R

Follow these directions to rename a title list entry, i.e., to

edit the title of a recorded program.

Follow these directions to playback an entry from the Title

List.

Insert the disc.

Press the MENU button.

Insert the recorded disc.

Press the MENU button.

Enter the desired characters using the arrow (ꢀ❷

➛❿) buttons.

• Back Space: Moves the cursor to the previous

character. (Functions the same as CLEAR )

Press the ꢀ❷ button to select Title List, and then

press the ENTER or ❿ button,

• Space: Enters a blank and moves the cursor to the

right.

or press the TITLE LIST button on the remote

control.

• Delete: Deletes the character at the cursor posi-

tion.

• The View Title List screen is displayed.

• Clear: Deletes all the character inputs.

• Save: Registers the character inputs.

Press the ꢀ❷ button to select an entry you want

to rename from Title List, and then press the

ENTER or ❿ button.

Press the arrow buttons to select Save, and then

press the ENTER button.

• The Edit Title List menu is displayed.

• The changed title is displayed on the title item of

the selected entry.

Press the ꢀ❷ button to select Title List, and then

press the ENTER or ❿ button,

or press the TITLE LIST button on the remote

control.

• The View Title List screen is displayed.

Press the ꢀ❷ button to select an entry you want

to playback from Title List, and then press the

ENTER or ❿ button.

• The Edit Movie List menu is displayed.

76 - English

English - 77

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select Delete, and then

Press the ꢀ❷ button to select Protection, and then

press the ENTER button.

• DVD-RAM(VR), DVD-RW(VR mode): Since

Playlist is present, the message “Do you want to

delete? (Related Playlist may be deleted.)” is dis-

played.

DVD-RW(Video mode), DVD-R: Since Playlist is

not present, the message “Do you want to delete?”

is displayed.

• You will be prompted with the confirmation mes-

sage ‘Title Protection:’.

Deleting a Title List

Entry

Locking a Title List

Entry

DVD-RAM DVD-RW

DVD-R

DVD-RAM DVD-RW

DVD-R

• You cannot delete a protected entry.

If you want to delete a protected entry, select

“OFF” in the protection menu.

Follow these directions to delete an entry from the Title List.

Follow these directions to lock an entry if you want to pro-

tect it from unexpected deletions.

Insert the recorded disc.

Press the MENU button.

may be deleted.)

Press the ➛❿ buttons to select On, and then press

the ENTER button.

Press the ꢀ❷ button to select Title List, and then

• The Lock icon on the information window for the

selected entry changes to the locked status.

Press the ꢀ❷ button to select Title List, and then

press the ENTER or ❿ button,

press the ENTER or ❿ button.

Press the ➛❿ buttons to select off, and then press

the ENTER button to unlock Title Protection.

or press the TITLE LIST button on the remote

• The View Title List screen is displayed.

control.

• The View Title List screen is displayed.

Press the ꢀ❷ button to select an entry you want

to protect from Title List, and then press the ENTER

or ❿ button.

ꢀBe careful, since you cannot recover an entry once

Press the ꢀ❷ button to select an entry you want

it is deleted from Title List.

to delete from Title List, and then press the ENTER

or ❿ button.

• The Edit Title List menu is displayed.

Note

• The Edit Title List menu is displayed.

Press the ➛❿ button to select yes and than press

the ENTER button.

78 - English

English - 79

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the end point.

Press the ꢀ❷ button to select Edit, and then press

the ENTER button. The Edit Program is displayed.

! Playback bar

Deleting a Section from

a Title List Entry

Creating a Playlist Entry

@ Playtime

The image and time at the end point are

displayed the end point window.

# Section deletion start point window and time

$ Section deletion end point window and time

DVD-RAM DVD-RW

VR mode

Follow these directions to delete a section from a Title List

entry.

Follow these directions to create a new playlist entry from a

recorded title.

Insert the recorded disc.

Press the MENU button.

Press the MENU button when the disc is stopped.

• You cannot recover a section once it is deleted

from Title List.

Press the ꢀ❷ button to select Playlist, and then

press the ENTER or ❿ button.

Press the ꢀ❷ buttons to select Delete, and then

press the ENTER button.

Press the ꢀ❷ button to select Title List, and then

press the ENTER or ❿ button,

Search the start points of the section you

want to delete using the playback related buttons.

• Message “Do you want to delete?” will be dis-

played.

or press the TITLE LIST button on the remote con-

trol.

• Playback related buttons: ❿ , l➛➛

❿❿l, ➛➛,

❿❿.

• If you want to cancel, press RETURN button to

return to the Title List screen.

• The View Title List screen is displayed.

ꢀBe careful, since you cannot recover a

section once it is deleted from Title List.

Press the ꢀ❷ button to select an entry you want

to edit from Title List, and then press the ENTER or

Note

❿ button.

• The Edit Title List menu is displayed.

Press the ꢀ❷ button to select Start, and then press

the ENTER button.

• The image and time at the start point are

displayed on the start window.

Press the ꢀ❷ button to select New Playlist, and

then press the ENTER or ❿ button.

• The Make Scene screen is displayed.

Press the MENU button to exit the menu after the

operation is finished.

The Title List screen will disappear.

ꢀPlay List : The Playlist is a unit of playback, that is

created by selecting a desired scene in

Note

the Title List. Since only the information

necessary for playing a desired scene is

included in a playlist, even if that

playlist is deleted, the original data will

not be deleted.

ꢀThe length of the selection to delete should be at

least 5 seconds long.

Note

ꢀIf the length of the section to delete is less than 5

seconds, you will be prompted with the message

“The range is too short”.

ꢀIf the end time precedes the start time, you will be

prompted with the message “End point cannot be

marked earlier than start point”.

80 - English

English - 81

Download from Www.Somanuals.com. All Manuals Search And Download.

Select the start point of the section from which you

want to create a new scene using the playback relat-

ed buttons, and then press the PAUSE button.

Press the ENTER button to select END point.

Press the ꢀ❷ button to select a function to use,

and then press the ENTER button.

• The image and time at the end point are

displayed on the End window.

• Play: Playbacks the selected entry.

Editing a Playlist Entry

• Playback related buttons: ❿ , ❿❿l, l➛➛

• The yellow-colored selection bar moves to the

Make item.

• Rename: Renames the title of the selected entry.

Functionality is the same as the Rename

item in the Edit Record List.

❿❿,➛➛

• The screen returns to the Edit Playlist screen. 2

• Edit Scene: Edits scenes of the selected entry.

• Copy: Copies the selected entry.

Scene No.001

DVD-RAM DVD-RW

Scene No.001

Follow these directions to playback or edit (rename, ^{VR mode}

edit scene, copy and delete ) the newly created playlist

entries.

• Delete: Deletes the selected entry from the list.

Insert the recorded disc.

Press the MENU button when the disc is stopped.

Press the ꢀ❷ button to select Start, and then press

the ENTER button.

Press the ENTER button to confirm.

Press the ꢀ❷ button to select Playlist, and

then press the ENTER or ❿ button.

• A new make scene screen is displayed.

• Scenes to be made will be added to the current

playlist.

• Repeat the above steps to make more than one

scene.

• The image and time at the start point are

displayed on the Start window.

• The yellow-colored selection bar moves to the

End item.

Press the ꢀ❷ button to select Edit Playlist, and

then press the ENTER or ❿ button,

or press the PLAY LIST button on the remote con-

trol.

Press the MENU or PLAYLIST button after the oper-

ation is finished. The Playlist screen will disappear.

If you want to cancel. press the ꢀ❷ buttons to

select RETURN, and then select the ENTER button.

Scene No.001

• The Edit Playlist screen is displayed.

Playing Playlist Entries

Press the MENU or RETURN button to exit the

menu.

Follow these directions to playback the playlist entries.

• The Playlist screen will disappear.

Search the end point of the section from which you

want to create a new scene using the playback relat-

ed buttons, and then press the ❿ button.

Press the ꢀ❷ button to select Play, and then select

the ENTER button.

ꢀYou can create up to 30 playlist entries.

Note

• The playlist entries will be played back.

Press the ꢀ❷ button to select an entry (title) you

want to edit from the Playlist,and then press the

ENTER or ❿ button.

• The screen returns to the Edit Playlist screen

when the playback is finished.

• The Edit Playlist menu is displayed.

:Play, Rename, Edit Scene, Copy, Delete

Press the STOP button to stop the playback in

progress.

• The screen returns to the Edit Playlist screen.

82 - English

English - 83

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select Edit Scene, and then

press the ENTER button

B. Modifying a Scene (Replacing

a Scene)

Renaming Playlist Entries

Editing Scene for a

Playlist Entry

• The Edit Scene screen is displayed.

Follow these directions to rename a playlist entry, i.e., edit

the title of a playlist entry.

Edit Scene

Press the arrow buttons to select the scene you want

to modify, and then press the ENTER button.

Scene No.

1/9

Playlist No.

Play

Modify

DVD-RAM DVD-RW

00:00:26 02

00:00:07 03

00:00:11 06

00:00:04

Move

Press the ꢀ❷ button to select Rename, and

then press the ENTER button.

VR mode

Follow these directions to edit scenes for a playlist

entry.

Add

Press the arrow buttons to select Modify, and then

press the ENTER button.

• The Rename screen is displayed.

Delete

00:00:03 05

00:00:04

• The Modify Scene screen is displayed.

Insert the recorded disc.

Select the desired characters using the arrow

Press the MENU button when the disc is stopped.

ꢀ❷➛❿ buttons.

• Functionality is the same as the Rename item

in the Edit Record List screen.

00:00:17

00:00:06

A. Playing a Desired Scene

Press the ꢀ❷ button to select Playlist, and then

press the ENTER or ❿ button.

9 Scene

00/05/10 10:25:30(PM)

Press the arrow buttons to select the scene you want

to playback, and then press the ENTER button.

• The playlist entry to playback is selected.

Press the ꢀ❷ button to select Edit Playlist, and

then press the ENTER or ❿ button,

or press PLAY LIST button on the remote control.

Select the start point of the section with which you

want to modify the selected scene using the playback

related buttons.

• The Edit Playlist screen is displayed.

• Playback related buttons: ❿ , ❿❿l, l➛➛,➛➛, ❿❿.

Press the ꢀ❷ button to select an entry (title) you

want to edit from the Playlist,and then press the

ENTER or ❿ button.

Press the arrow buttons to select save, and then

press the ENTER button.

• The Edit Playlist menu is displayed.

• The Name you changed is displayed on the title

item of the selected playlist entry.

00:00:17

00:00:06

Press the ENTER button.

• The selected scene is played back.

9 Scene

00/05/10 10:25:30(PM)

Press the ꢀ❷ button to select Start, and then press

the ENTER button.

• The image and time at the start point are

displayed on the Start window.

84 - English

English - 85

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the end point of the

scene.

Press the arrow buttons to select the position where

you want to move the selected scene, and then press

the ENTER button.

Press the ꢀ❷ button to select Start, and then press

the ENTER button.

E. Deleting a Scene from the

Playlist

• The image and time at the start point are

displayed on the Start window.

• The selected scene is moved to the new

position.

Press the arrow buttons to select the scene you want

to delete, and then press the ENTER button.

Press the ꢀ❷ buttons to select delete, and then

press the ENTER button.

Press the ꢀ❷ buttons to select Change, and then

press the ENTER button.

Select the end point of the section you want to add

as a new scene using the playback related buttons.

• The scene you wanted to modify is changed with

the selected section.

ꢀYou cannot move the selected scene to the position

of the next scene, because the selected scene

should be inserted before that position.

• If you want to cancel a modification, select cancel

and then press the ENTER button.

Note

Press the ꢀ❷ button to select End, and then press

the ENTER button.

• The image and time at the end point are displayed

on the End window.

C. Moving a Scene

(Changing the Position of a Scene)

D. Adding a Scene

Add Scene

Scene NO.001

Press the arrow buttons to select the scene before

which you want to add a new scene, and then press

the ENTER button.

Press the arrow buttons to select the scene you want

to move (change the position), and then press the

ENTER button.

Start

End

00:00:15

00:00:00

• A yellow selection window is displayed on the

scene to add as a new scene.

00:00:15

Add

Cancel

03/05/10 10:25:30(AM)

Press the ꢀ❷ buttons to select Move, and then

press the ENTER button.

Press the ꢀ❷ buttons to select Add and then press

• A yellow selection window is displayed on the

scene to move.

the ENTER button.

Press the ꢀ❷ buttons to select Add, and then

press the ENTER button.

• The Add Scene screen is displayed.

• The section you wanted to add is added before the

scene selected in step 1.

Select the start point of the section to which you want

to add the scene in step 1 using the playback related

buttons.

• Playback related buttons: ❿ , ❿❿l, l➛➛,➛➛, ❿❿

• If you want to cancel select cancel and then press

the ENTER button.

86 - English

English - 87

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select Delete, and then

press the ENTER button.

• You will be prompted with the delete confirmation

message ‘Do you want to delete?’.

Disc Manager

Copying a Playlist Entry

to the VCR

Deleting a Playlist Entry

from the Playlist

DVD-RAM DVD-RW

Do you want delete?

DVD-RAM DVD-RW

DVD-R

VR mode

Editing Disc Name

Insert the recorded disc.

Press the MENU button when the disc is stopped.

Insert the recorded disc and the tape.

Press the MENU button when the disc is stopped.

Follow these directions to give a name to a disc

Press the ꢀ❷ button to select Playlist, and then

press the ENTER or ❿ button.

Press the ꢀ❷ button to select Playlist, and

then press the ENTER or ❿ button.

Insert the disc.

Press the MENU button when the disc is stopped.

Press the ➛❿ buttons to select Yes, and then press

the ENTER button.

Press the ꢀ❷ button to select Edit Playlist, and

then press the ENTER or ❿ button,

or press the PLAY LIST button on the remote

control.

• The screen returns to the Edit Playlist screen

automatically after the delete operation finished.

Press the ꢀ❷ button to select Edit Playlist, and

then press the ENTER or ❿ꢁbutton,

or press the PLAY LIST button on the remote con-

trol.

Press the ꢀ❷ button to select Disc Manager, and

then press the ENTER or ❿ꢁbutton.

• The Edit Playlist screen is displayed.

Press the ꢀ❷ button to select an entry (title) you

want to delete from the Playlist, and then press the

ENTER or ❿ button.

• The Edit Playlist menu is displayed.

Play, Rename, Edit Scene, Copy, Delete

Press the ꢀ❷ button to select Disc Name, and

then press the ENTER or ❿ button.

Press the ꢀ❷ button to select an entry(title) you

want to copy to the VCR, and then press the

ENTER or ❿ button.

• The Edit Name screen is displayed.

• The Edit Playlist menu is displayed.

Play, Rename, Edit Scene, Copy, Delete

Enter the desired characters using the arrow

buttons.

Press the ꢀ❷ button to select Copy, and then press

the ENTER button.

• The title you choose is played and copied to VCR

tape.

88 - English

English - 89

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ꢀ❷ button to select Disc Protection, and

Press the arrow buttons to select Save, and then

press the ENTER button.

Press the ➛❿ buttons to select Yes, and then press

the ENTER button.

Formatting a DVD-RAM/DVD-RW Disc

then press the ENTER or ❿ button.

• A disc name is given to the disc.

• The disc is formatted.

Use these instructions to format a disc. The cartridge write

protect tab should be set to the unprotect position. The disc

protection should also be cleared.

DVD-RW

You will be prompted with the confirmation message

“Choose the recording format for DVD-RW”.

Insert a disc to be formated.

Press the MENU button with the disc stopped.

Disc Manager

Choose the recording format fot DVD-RW.

DVD-VR

DVD-V

Press the ꢀ❷ button to select Disc Manager, and

then press the ENTER or the ❿ button.

Press the ꢀ❷ button to select Protected, and then

press the ENTER button.

ꢀYou may need to clear cartridge protection or

unlock the protect before beginning editing.

Note

DVD-VR and DVD-V are defined according to their record-

ing format

Disc Protection

DVD-VR

Possible

DVD-V

Disc Protection allows you to protect your discs from disc

format and program deletion due to unintended operations.

Editing

DISC

Inconvenience

(Partial editing is possible)

Disc Manager

DVD-RAM

DVD-RW

DVD-R

Press the MENU button when the disc is stopped.

Press the ꢀ❷ button to select Disc Format, and

then press the ENTER or the ❿ button.

ꢀDisc Protection will operate only if cartridge protect

is cleared.

• You will be prompted with the confirmation mes-

sage 'Do you want to format disc?'.

Note

Press the ꢀ❷ button to select Disc Manager, and

then press the ENTER or ❿ button.

• If you press ENTER you will be prompted with

the confirmation message 'All data will be deleted.

Do you want to continue?'.

Do you want to format disc?

Disc Manager

90 - English

English - 91

Download from Www.Somanuals.com. All Manuals Search And Download.

Finalizing a disc

Delete All Title Lists

ꢀOnce a disc is finalized, you cannot delete entries

from the record list.

Cartridge Protect Info (DVD-RAM)

DVD-RW

DVD-R

Note

ꢀAfter being finalized, the DVD-R operates in the

same manner as a DVD-Video.

Disc Protect allows you to protect discs from disc formatting

and program deletion due to unintended operations. The

cartridge write protect tab should be set to the unprotect

position to be able to make a recording to a DVD-RAM disc.

DVD-RAM DVD-RW

DVD-R

After you record titles onto a DVD-RW/DVD-R disc with

your DVD Recorder-VCR, it needs to be finalized before it

can be played back on compatible external devices.

Follow these instructions to delete all title lists.

ꢀDepending on the kind of disc, the displayed

screen may be slightly different.

ꢀFinalizing will be taken few minutes. If you turn

the unit on/off or open the tray during finalizing,

you will not be able to use the disc anymore.

Insert the recorded disc.

Press the MENU button with the disc stopped.

Insert the disc.

Press the MENU button with the disc stopped.

Insert the recorded disc.

Press the MENU button with the disc stopped.

Press the ꢀ❷ button to select Disc Manager, and

then press the ENTER or the ❿ button.

Press the ꢀ❷ꢁbuttons to select Disc Manager, and

then press the ENTER or the ❿ button.

Press the ꢀ❷buttons to select Disc Manager, and

then press the ENTER or the ❿ button.

DVD-RAM(VR)

Press the ꢀ❷ buttons to select Cartridge

Protection Info, and then press the ENTER or the

❿ button.

Cartridge Protection Info

• The cartridge protection info for the disc is dis-

played.

If the disc cartridge is protected, open the disc tray

and check the disc.

Disc Manager

Disc Setting

Press the ꢀ❷ button to select Delete All Title Lists,

and then press the ENTER or the ❿ button.

Disc cartridge is protected.

open tray and check disc.

• You will be prompted with the confirmation mes-

sage 'Do you want to delete all title lists?'.

Press the ꢀ❷ button to select Disc Finalize, and

then press the ENTER or the ❿ button.

DVD-RAM(VR)

• You will be prompted with the message 'Do you

want to finalize disc?'. If you select Yes, you will be

prompted again with the message ' Disc will

be finalized. Do you want to continue?'

Do you want to delete all title lists?

Cartridge Protection Info

If the disc cartridge is not protected, proceed with

recording to the disc.

YES

Disc Setting

• You cannot delete a protected entry.

If you want to delete a protected entry, disable

Protection for it on the Lock item.

Disc cartridge is not protected.

Open tray and check disc.

• Disc Protection: When Protected or Cartridge

Protection has been set, or when a DVD-RAM is

used, data cannot be deleted from a disc.

Press the ➛❿ buttons to select Yes, and then press the

ENTER button.

• The disc is finalized.

Press the ➛❿ buttons to select Yes, and then press

the ENTER button.

ꢀDisc Protection will operate only if cartridge pro-

• The disc is deleted.

tect is set to Not Protected.

Note

92 - English

English - 93

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ➛❿ buttons to select Yes, and then press the

ENTER button.

Unfinalizing a disc (V/VR mode)

• The disc is unfinalized.

DVD-RW

Reference

Insert the finalized disc.

Press the MENU button with the disc stopped.

• A DVD-RW can be finalized or unfinalized in Video mode.

Finalize

Unfinalize

Mark

DVD-VIDEO(RW)

DVD-RW(V)

Press the œ❷ button to select Disc Manager, and

then press the ENTER or ❿ button.

Operation

Same as

Additional

DVD-Video

recording, protection

and deletion are possible.

• A DVD-RW can be finalized or unfinalized in VR mode.

Finalize

Unfinalize

Mark

DVD-RW(VR:F)

DVD-RW(VR)

Operation

Additional recording,

deletion, editing, and

protection are impossible.

Additional recording,

deletion, editing, and

protection are possible.

Press the œ❷ button to select Disc Unfinalize, and

then press the ENTER or ❿ button.

• You will be prompted with the message 'Do you

want to unfinalize disc?'. If you select Yes, you will

be prompted again with the message ' Disc will be

unfinalized. Do you want to continue?'

Troubleshooting

(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)

❷

Troubleshooting

❷

Problems and Solutions (VCR)

❷

Specifications

❷

LIMITED WARRANTY TO ORIGINAL

PURCHASER

•

Troubleshooting (DVD-VIDEO/DVD-RAM/

DVD-RW/DVD-R) . . . . . . . . . . . . . . 96

Troubleshooting . . . . . . . . . . . . . . 97

Problems and Solutions (VCR) . . . . 98

Specifications . . . . . . . . . . . . . . . . . 99

•

94 - English

English - 95

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)

If you experience any of the following difficulties while using this product, check the list below before consulting

your nearest Toshiba dealer.

You cannot use the operation or function due to one of the following reasons:

(1) Your DVD disc does not support the feature (for example, angles)

(2) You've requested a title, chapter, or scan time that is out of the correct range.

icon appears on

the screen.

•

Check whether the power cord is securely plugged into the wall outlet.

Did you press the power button of your DVD Recorder-VCR.

No power.

Play mode settings are

different from the set-

tings configured with

the Setting menu.

The disc does not support all the selected functions.

In this case, some settings you configure on the Setting menu may not work properly.

The input is displayed

for a while when the

power turns on.

The DVD Recorder-VCR requires some time to initialize after it is turned on.

Cannot change the

aspect ratio.

Aspect ratio is fixed for DVD disc.

•

Did you set the DVD Recorder-VCR channel settings correctly?

Check the free space on your DVD-RAM/DVD-RW/DVD-R disc.

Check the antenna cable is connected.

Cannot record TV

programs.

Check whether you selected correct digital output options in the Audio Output Options

menu.

No audio output.

•

Check the recording time, end time and current time settings again.

Recording will be cancelled, if the power is removed due to a power

failure or other reason during recording.

Timer recording does

not work

properly.

No video or audio output.

The disc tray is ejected

after 2 to 5 seconds.

Did you move your DVD Recorder-VCR suddenly from a cold place to a warm place? In this

case, remove discs and wait for one to two hours with the power on, and then, insert the disc

and try to playback again. It will work properly when condensation is removed.

Angle operation does not

work during playback of a

DVD disc.

Angle operation is available only when the disc contains the images captured at different

angles.

•

Check whether the disc is formatted. This product can record on

formatted discs only. (See page 91.)

Is the DVD-RAM cartridge protected?

Set the write protect tab to the unprotect position.

Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient free space.

Cannot record.

•

Check whether there is damage or foreign materials on your disc.

Some discs with bad manufacturing quality may not be played back.

If the scene changes from dark to bright suddenly, the screen

may jitter temporarily, but it is not a defect.

The disc revolves, but

no image or bad quali-

ty images are output.

Recording is available on DVD-RAM/DVD-RW/DVD-R discs only.

If a program is copy protected, you cannot record it.

I pressed the REC

button but there is

no response.

Desired sound

language and

subtitle language are

not played.

Sound languages and subtitle languages are disc-specific.

Only the sound and subtitle languages contained on a DVD disc are

available and displayed on the disc menu.

Press the ➛➛ and ❿❿ buttons of your DVD Recorder-VCR at the same time when the power

is on. All settings including password will revert to factory settings. Do not use it if not

absolutely required.

I forget the pass

word for parental

care.

•

Check whether “480P” is displayed on front panel.

Make sure to change the component video output using the Progressive button when the

disc is stopped.

No progressive

(480P) output.

(Note that this function is available only when there is no disc inserted.)

•

Check whether the disc is inserted correctly with the label facing up.

Check the regional code of your DVD disc.

This DVD Recorder-VCR cannot playback some types of disc. (See page 7.)

Cannot playback the

disc.

•

Point the remote control at the remote control sensor on your DVD recorder-VCR.

Operate within distance. (15ft)

Remove obstacles between your DVD Recorder-VCR and remote control.

Check whether the batteries are depleted.

The remote control

doesn't work.

•

Are you watching a program in slow or skip mode?

If you are playing a program at a speed other than normal speed, sound

is not output.

Check the connections and initial settings.

Check whether the disc is damaged.

No sound.

Read the table of contents and then find and read the sections

describing your problem, and follow the directions given.

Turn the unit off and on.

Other problems

•

If your problem still persists, contact your nearest Toshiba service center.

Clean up the disc, if necessary.

•

Check whether the disc is inserted correctly with the label facing up.

96 - English

English - 97

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Problems and Solutions (VCR)

Before contacting a Toshiba authorized service center, perform the following simple checks.

Power requirements

Power consumption

120V AC, 60Hz

45 Watts

Problem

Explanation/Solution

General

Weight

9.03 lb

No power

ꢀ

Check that the power plug is connected to a wall outlet.

Have you pressed the POWER button?

Dimensions

Operating temp.

Other conditions

Video

16.9 in(W) x 10.6 in(D) x 3.1 in(H)

+41°F to +95°F

You cannot insert a video cassette

The television program was not recorded

ꢀ

A video cassette can only be inserted with the window

side up and the safety tab facing you.

Keep level when operating. Less than 75% operating humidity

1.0 V p-p at 75Ω load, sync negative

S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load)

2Vrms

ꢀ

Check the DVD Recorder-VCR antenna connections.

Is the DVD Recorder-VCR tuner properly set?

Check if the safety tab is intact on the cassette.

Input

Max. Audio Input Level

DV Input

Timer recording was unsuccessful

ꢀ

Re-check the recording start/stop time settings and the current time

Check whether you insert a tape which has enough time record

IEEE 1394(4p) compatible jack

Regular TV broadcasting: VHF (2~13), UHF (14~69)

Cable TV broadcasting: 1~125

Audio output jacks 1, 2

Receivable Channels

No playback picture or the picture

is distorted

ꢀ

Check to see if you are using a prerecorded tape.

Audio

You cannot see normal broadcasts

Noise bars or streaks on playback

ꢀ

Check the TUNER/EXTERNAL setting. It should be on TUNER.

Check the TV antenna connections.

Optical/Coaxial digital audio output support

Min. 100 dB signal-to-noise ratio

Max. 0.005% total harmonic distortion (T.H.D)

• at average 1 KHz

Press the TRK (

❷) buttons to minimize this effect.

Output

When the

❿

button is pressed

ꢀ

A still picture may have “noise bars”, depending on the

during playback, the still picture

has severe “noise bar” streaks

condition of the tape. Press the TRK ( or ) buttons

❷

during SLOW motion to minimize this effect.

Video

Video output jacks 1

S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)

Component output

Video Head Cleaning

ꢀ

If poor pictures appear on a variety of cassettes, the video

heads may need cleaning. This is not a common problem

and unless it appears, the heads should not be cleaned.

When cleaning the video heads, read all instructions

provided with the head cleaning cassette. Incorrect head

cleaning can permanently damage the video heads.

(Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75Ω load)

MPEG-II

Picture Compression format

Audio Compression format

Dolby AC-3 256kbps

XP (about 8 Mbps), SP (about 4 Mbps), LP (about 2 Mbps),

EP (about 1.2 Mbps)

If you are unable to solve the problem after reading the above instructions, note:

DVD

Recording Quality

ꢀ

The model and serial number on the rear of your DVD Recorder-VCR

The warranty information

A clear description of the problem

Video S/N Ratio

Min. 50dB at standard recording

Min. 75dB

Audio S/N Ratio

Audio frequency characteristics

20 Hz ~ 20 KHz

Then contact nearest Toshiba authorized service center.

•

The design and specifications may change without prior notice.

Audio Output

For DVD discs, audio signals recorded at 96kHz sampling frequency are converted into and output at 48kHz digital out-

put.

Disc Type

DVD

48 / 96KHz

48KHz

VIDEO-CD

44.1KHz

AUDIO CD(CDDA)

44.1KHz

Analog Audio Output

Digital Audio Output

44.1KHz

98 - English

English - 99

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Obtain Warranty Services

HOW STATE LAW RELATES TO WARRANTY

THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER

RIGHTS WHICH MAY VARY FROM STATE TO

STATE IN THE U.S.A. SOME STATES OF THE

U.S.A. DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRAYNTY LASTS, WHEN

AN ACTION MAY BE BROUGHT, OR THE EXCLU-

SION OR LIMITATION OF INCIDENTAL OR CON-

SEQUENTIAL DAMAGES, SO THE ABOVE LIMITA-

TIONS OF EXCLUSIONS MAY NOT APPLY TO YOU

UNDER SUCH CIRCUMSTANCES.

If, after following all of the operating instructions in

this manual and checking the section

"Troubleshooting", you find that service is needed:

(1) For instruction on how to obtain warranty service

for your DVD PLAYER/RECORDER, contact

TACP Call Center's toll free number at 1-866-583-

7353.

Limited Warranty DVD PLAYER/RECORDER

Toshiba America Consumer Products, L.L.C,. ("TACP") makes the following limited warranties to original con-

sumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PUR-

CHASER OR ANY PERSON RECEIVING THIS DVD PLAYER/RECORDER AS A GIFT FROM THE ORIGINAL

CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

(2) You must include a copy or original bill of sale or

other proof of purchase along with the entire DVD

PLAYER/RECORDER to the Authorized TACP

Service Station specified by the Call Center. You

must pay for all transportation and insurance

charges for the DVD PLAYER/RECORDER to the

Service Station.

PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.

PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.

Limited Ninety (90) Day Warranty on Labor*

TACP warrant this DVD PLAYER/RECORDER and

its parts against defects in materials or workmanship

for a period of ninety (90) days after the date of origi-

nal retail purchase. DURING THIS PERIOD, TACP

WILL, AT TACP's OPTION, REPAIR OR REPLACE A

DEFECTIVE PART WITH A NEW OR REFUR-

BISHED PART WITHOUT CHARGE TO YOU FOR

PARTS OR LABOR.

Owner's Manual and Demographic Card

You should read this owner's manual thoroughly

before operating this DVD PLAYER/RECORDER.

You should complete and mail the enclosed

Demographic card within ten days after you, or the

person who has given you this product as a gift, pur-

chased this DVD PLAYER/RECORDER. This is one

way to enable TACP to provide you with better cus-

tomer service and improved products. Failure to

return the Demographic card will not affect your

rights under this warranty.

For additional information, visit TACP's web site:

www.tacp.toshiba.com

Time for Taking Action

ALL WARRANTIES IMPLIED BY THE LAW OF ANY

STATE OF THE U.S.A., INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE

EXPRESSLY LIMITED TO THE DURATION OF THE

LIMITED WARRANTIES SET FORTH ABOVE. WITH

THE EXCEPTION OF ANY WARRANTIES IMPLIED

BY THE LAW OF ANY WARRANTIES IMPLIED BY

THE LAW OF ANY STATE OF THE U.S.A. AS HERE-

BY LIMITED, THE FOREGOING WARRANTY IS

EXCLUSIVE AND IN LIEU OF ALL OTHER WAR-

RANTIES, GUARANTEES, AGREEMENTS AND

SIMILAR OBLIGATIONS OF TACP WITH RESPECT

TO THE REPAIR OR REPLACEMENT OF ANY

PARTS. IN NO EVENT SHALL TACP OR BE LIABLE

FOR CONSEQUENTIAL OR INCIDENTAL DAM-

AGES.

YOU MUST DELIVER THE ENTIRE DVD

PLAYER/RECORDER TO AN AUTHORIZED TACP

SERVICE STATION. YOU MUST PAY FOR ALL

TRANSPORTATION AND INSURANCE CHARGES

FOR THE DVD PLAYER/RECORDER TO AND

FROM THE SERVICE STATION.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE

FOLLOWING CONDITIONS:

(1) You must provide your bill of sale or other proof

of purchase.

Limited One (1) Year Warranty on Parts*

TACP further warrant the parts in this DVD PLAY-

ER/RECORDER against defects in materials or work-

manship for a period of one (1) year after the date of

original retail purchase. DURING THIS PERIOD,

TACP WILL, AT-TACP’S OPTION, REPAIR OR

REPLACE A DEFECTIVE PART WITH A NEW OR

REFURBISHED PART WITHOUT CHARGE TO YOU

FOR THE PART, PROVIDED THAT IF A DEFECTIVE

PART IS REPAIRED OR REPLACED AFTER NINE-

TY (90) DAYS FROM THE DATE OF ORIGINAL

RETAIL PURCHASE, THE CONSUMER PAYS ALL

LABOR CHARGES INVOLVED IN THE REPAIR OR

REPLACEMENT. YOU MUST DELIVER THE

(2) All in-warranty servicing of this DVD

PLAYER/RECORDER must be made by a speci-

fied Authorized TACP Service Station.

(3) The warranties from TACP are effective only if the

DVD PLAYER/RECORDER is purchased and

operated in the U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, set up,

adjustment of customer controls and installation

or repair of hook up related items and/or antenna

systems are not covered by these warranties.

Reception problems caused by inadequate anten-

na systems are your responsibility.

No person, agent, distributor, dealer or company is

authorized to change, modify or extend the terms of

these warranties in any manner whatsoever. The time

within which action must be commenced to enforce

any obligation of TACP arising under this warranty or

under any law of the United States or of any state

thereof is hereby limited to 90 days from the date you

discovered or should have discovered, the defect. This

limitation does not apply to implied warranties arising

under the law of any state of the U.S.A.

ENTIRE DVD PLAYER/RECORDER TO AN AUTHO-

RIZED TACP SERVICE STAITON. YOU MUST PAY

FOR ALL TRANSPORTATION AND INSURANCE

CHARGES FOR THE DVD PLAYER/RECORDER TO

AND FROM THE SERVICE STATION.

(5) Warranties extend only to defects in materials or

workmanship as limited above and do not extend

to any DVD PLAYER/RECORDER or parts which

have been lost or discarded by you or to damage

to DVD PLAYER/RECORDER or parts caused by

misuse, accident, Acts of God, such as lightning

or fluctuations in electric power, improper installa-

tion, improper maintenance or use in violation of

instructions furnished by TACP; or to units which

have been modified or had the serial number

removed, altered, defaced or rendered illegible.

*Rental Units

The warranty for rental units begins with the first

rental or thirty (30) days from the date of shipment to

the rental firm, whichever comes first.

*Commercial Units

DVD PLAYER/RECORDER(s) sold and used for

commercial purposes have a limited ninety (90) day

warranty.

100 - English

English - 101

Download from Www.Somanuals.com. All Manuals Search And Download.

• Toshiba no se responsabilizará de los daños causados

por incendios, desastres naturales (como rayos, terre-

motos, etc.), acciones de terceros, accidentes, uso inde-

bido intencionado o no por parte del usuario y demás

usos indebidos.

• Toshiba no se responsabilizará de los daños adicionales

(como pérdida de beneficios o cese de negocio, modifi-

cación o borrado de datos grabados, etc.) provocados

por el uso o imposibilidad de utilizar este producto.

• Toshiba no se responsabilizará de los daños que resul-

ten del incumplimiento de las instrucciones descritas

en el manual del usuario.

• Toshiba no se responsabilizará de cualesquiera daños

que resulten del mal uso, mal funcionamiento por uso

simultáneo de este producto y el equipo o software

conectado del que Toshiba no sea responsable.

• Toshiba no compensará al usuario por el contenido

que no se grabe o edite debido a un mal funcionamien-

to del producto o los discos durante su manejo, así

como tampoco será responsable de los daños secundar-

ios (como pérdida de beneficios o cese de negocio,

etc.) provocados por tales condiciones.

NOTA FCC (para EE.UU.):

Este equipo ha sido probado y se ha certificado como com-

patible con los límites para dispositivos digitales de Clase B

conforme a la Parte 15 de las Normas FCC. Dichos límites

están diseñados para facilitar una protección razonable frente

a interferencias dañinas en una instalación residencial. Este

equipo genera, emplea y puede emitir energía de radiofre-

cuencia y, si no se instala conforme a las instrucciones,

puede causar interferencias dañinas a las comunicaciones

por radio. No obstante, no existe garantía de que no se pro-

duzcan interferencias en instalaciones concretas. Si el equipo

crea interferencias dañinas a la recepción de radio o tele-

visión, lo cual puede determinarse apagando y encendiendo

el equipo, se aconseja al usuario que intente corregir la inter-

ferencia siguiendo uno de los siguientes procedimientos:

Precaución

Warning

PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA,

NO RETIRE LA CUBIERTA (NI LA PARTE POSTERIOR). EN

EL INTERIOR SE ENCUENTRAN PIEZAS QUE NO

PUEDEN SER REPARADAS POR EL USUARIO. PÓNGASE

EN CONTACTO CON PERSONAL DE SERVICIO TÉCNICO

CUALIFICADO PARA CUALQUIER REPARACIÓN.

Instrucciones importantes de seguridad

PRECAUCI : LEA Y OBSERVE TODAS LAS ADVERTEN-

CIAS E INSTRUCCIONES DETALLADAS EN

ESTE MANUAL DEL USUARIO, ASÍ COMO

LAS INDICADAS EN LA UNIDAD. CON-

SERVE ESTE FOLLETO PARA FUTURAS

CONSULTAS.

Esta unidad ha sido diseñada y fabricada para garantizar la

seguridad personal. El uso indebido puede resultar en una

descarga eléctrica o incendio. Los dispositivos de seguridad

incorporados en esta unidad le protegerán siempre que siga

los procedimientos detallados a continuación para la insta-

lación, uso y mantenimiento de la unidad. Esta unidad está

totalmente transistorizada y no contiene piezas que puedan

ser reparadas por el usuario.

•

Vuelva a orientar o cambie de sitio la antena de recepción.

• Aumente la distancia entre el equipo y el receptor.

• Conecte el equipo a una toma que esté en un circuito

distinto del circuito al que está conectado el receptor.

• Consulte a su distribuidor o a un técnico de radio/TV

cualificado para que le ayude.

El símbolo indica "voltaje peligroso" en el

interior del producto que conlleva el ries-

go de descarga eléctrica o lesiones.

ꢁ Esta unidad sólo puede utilizarse si el suministro

Este símbolo indica que el producto se

acompaña de instrucciones importantes.

eléctrico es AC 120V, 60Hz. No se puede utilizar en

otras condiciones.

NO RETIRE LA PUERTA DEL ARMARIO O QUEDARÁ

EXPUESTO

Nota

ꢁ Esta grabadora de DVD - VCR está diseñada y fab-

ricada para responder a la Información de gestión

de regiones. Si el número de región del disco DVD

no se corresponde con el número de región de la

grabadora de DVD - VCR, no se podrá reproducir

el disco en la unidad.

ꢁ Este dispositivo está protegido por las patentes esta-

dounidenses número 4.631.603; 4.577.216;

4.819.098; 4.907.093 y 6.516.132. Este producto

incorpora la tecnología de protección de copyright

que está protegida por las patentes estadounidenses

y otros derechos de propiedad intelectual. El uso de

esta tecnología de protección de copyright debe

estar autorizada por Macrovision y está prevista

sólo para uso doméstico y otros usos de visual-

ización limitados, a menos que Macrovision

autorice lo contrario. Queda prohibida la aplicación

de ingeniería inversa o desmontaje.

A UN VOLTAJE PELIGROSO. PARA CUALQUIER

REPARACIÓN, CONTACTE EXCLUSIVAMENTE CON

PERSONAL DE MANTENIMIENTO CUALIFICADO.

1) Lea las instrucciones.

2) Guarde las instrucciones.

3) Atención a todas las advertencias.

4) Siga las instrucciones.

5) No utilice este aparato cerca del agua.

6) Límpielo sólo con un trapo seco.

No instale el equipo en un espacio cerrado, como una

librería o módulo similar.

AVISO: : Para evitar daños que puedan provocar un

incendio o descarga eléctrica, no exponga el

aparato a la lluvia o humedad.

PRECAUCIÓN : LA GRABADORA DE DVD – VCR

UTILIZA UN HAZ LÁSER QUE

PUEDE PROVOCAR UNA EXPOSI-

CIÓN PELIGROSA A RADIACIÓN

AL MIRARLO DIRECTAMENTE.

UTILICE LA GRABADORA DE

FORMA CORRECTA SEGÚN LAS

INSTRUCCIONES.

PRECAUCIÓN

ESTE PRODUCTO UTILIZA UN LÁSER.

EL USO DE CONTROLES, AJUSTES O PROCEDIMIEN-

TOS DISTINTOS DE LOS ESPECIFICADOS EN EL PRE-

SENTE DOCUMENTO PUEDEN PROVOCAR UNA PELI-

GROSA EXPOSICIÓN A RADIACIÓN.

NO RETIRE LAS CUBIERTAS NI REPARE EL APARATO

USTED MISMO. PÓNGASE EN CONTACTO CON PER-

SONAL DE SERVICIO TÉCNICO CUALIFICADO PARA

CUALQUIER REPARACIÓN.

7) No bloquee ninguna abertura de ventilación e instálelo

conforme a las instrucciones del fabricante.

8) No lo instale cerca de fuentes de calor como radiadores,

rejillas de aire caliente, estufas u otros aparatos (incluidos

los amplificadores) que produzcan calor.

9) No fuerce el objetivo de seguridad del enchufe polarizado

o el enchufe de tierra. Un enchufe polarizado tiene dos

hojas, una más ancha que la otra. Un enchufe de tierra

tiene dos hojas y un tercer terminal de tierra. La hoja

ancha o el tercer terminal son para su seguridad. Si el

enchufe suministrado no entra en la toma, consulte a un

electricista para sustituir la toma obsoleta.

10) Proteja el cable de alimentación para que no se pise o

apriete, especialmente en enchufes, tomas de corriente y

el punto de donde salen del aparato.

11) Use sólo acoples o accesorios que especifique el fabricante.

12) Utilícelo sólo con un carro, soporte, trípode, repisa o

mesa que especifique el fabricante o que se venda con el

aparato. Cuando se utilice un carro, tenga precaución al

mover la combinación del carro y del aparato para evitar

heridas derivadas de un vuelco.

13) Desenchufe este aparato durante tormentas de relámpa-

gos o cuando no se utilice durante mucho tiempo.

14) Encargue el mantenimiento a personal de servicio cualifi-

cado. El aparato necesita reparación cuando se ha dañado

de algún modo: enchufe o cable de alimentación dañado,

líquido derramado u objetos caídos sobre el aparato, si el

aparato se ha expuesto a la lluvia o a la humedad, si no

funciona con normalidad o si se ha caído.

ꢁ Este producto está cubierto por una o varias de las

siguientes patentes estadounidenses:

5,034,830 5,060,200 5,457,669 5,561,649

5,691,858 5,705,762 5,987,417 6,043,912

6,222,983 6,272,096 6,377,524 6,377,531

6,385,587 6,389,569 6,389,570 6,408,408

6,466,532 6,473,736 6,477,501 6,480,829

6,556,520 6,556,521 6,556,522 6,594,208

6,674,697 6,674,957 6,721,493 6,728,474

6,741,535 09/610381 09/610695

ꢁ Está permitida la grabación de programas de tele-

visión, películas, cintas de vídeo y demás material

siempre que no se violen los derechos de propiedad

de terceros u otros derechos.

AVISOS

Precaución: Para evitar una descarga eléctrica, conecte la

clavija más ancha a la toma correspondiente

e insértela completamente.

Attention: Pour éviter les chocs électriques, introduíre la

lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu au

fond.

Este producto cumple la normativa FCC cuando se uti-

lizan cables y conectores blindados para conectar la

unidad a otros equipos. Para evitar interferencias electro-

magnéticas con otros electrodomésticos, como radios o

televisores, utilice cables y conectores blindados para

realizar las conexiones.

ꢁ

Queda prohibido por ley copiar, emitir, mostrar,

emitir por cable, reproducir en público y alquilar

material protegido por copyright sin autorización.

Algunos discos de DVD cuentan con protección

anti copia por lo que las grabaciones de éstos

pueden mostrar distorsiones.

ꢁ

102 - Español

Español - 103

Download from Www.Somanuals.com. All Manuals Search And Download.

• Toshiba no compensará al usuario por el con-

tenido que no se grabe o edite debido a un

mal funcionamiento del producto o los discos

durante su manejo, así como tampoco será

responsable de los daños secundarios (como

pérdida de beneficios o cese de negocio, etc.)

provocados por tales condiciones.

INSTRUCCIONES DE SEGURIDAD

ADICIONALES

Maintenance of Cabinet

Almacenamiento del disco

For safety reasons, be sure to disconnect the power cord

from the wall outlet.

• Do not use benzene, thinner, or other solvents for

cleaning.

Tenga cuidado para no estropear el disco, ya que sus

datos son muy vulnerables al entorno.

• No los coloque a la luz directa del sol.

• Manténgalos en una zona ventilada y fresca.

• Almacénelos en vertical.

• Manténgalos en una funda de protección limpia.

• Si mueve el grabador de DVD y de vídeo de repente de

un lugar frío a uno caliente, puede generarse conden-

sación en las piezas de funcionamiento y en el objetivo

y quizá se reproduzcan mal. En este caso, quite el

disco y espere una o dos horas con la unidad encendi-

da antes de intentar reproducirlo.

15) Cuando utilice auriculares, mantenga el volumen a un

nivel moderado. Si utiliza auriculares de forma continu-

ada a un nivel alto puede sufrir lesiones en el oído.

16) No cargue en exceso las tomas de pared, alargaderas, o

receptáculos integrales, ya que esto puede provocar un

incendio o descarga eléctrica.

17) Evite mojar o salpicar el aparato y no coloque sobre éste

objetos con líquidos, como jarrones.

18) Procure separar los dedos de la bandeja del disco mien-

tras ésta se esté cerrando. De lo contrario podría sufrir

graves lesiones.

19) No coloque objetos pesados sobre el aparato ni se suba

encima de éste. El objeto podría caer, provocando graves

lesiones o daños al aparato.

20) No coloque el aparato sobre un amplificador u otro

equipo que emita calor.

• Wipe the cabinet with a soft cloth.

Corte de luz

Manejo del disco

• Tras un corte de luz, el reloj parpadea. Ponga

el reloj en hora.

• Utilice discos con formas reg-

ulares. Si utiliza un disco con

forma irregular (un disco con

una forma especial), podrá

dañar este grabador de DVD y

reproductor de vídeo.

Notas acerca del copyright

• Queda prohibido por ley copiar, emitir,

mostrar, emitir por cable, reproducir en públi-

co y alquilar material protegido por copyright

sin autorización.

• Algunos discos de DVD cuentan con protección anti

copia por lo que las grabaciones de éstos pueden

mostrar distorsiones.

• Este producto incorpora la tecnología de protección de

dounidenses y otros derechos de propiedad intelectual

que son propiedad de Macrovision Corporation y otros

propietarios. El uso de esta tecnología de protección de

Corporation y está prevista sólo para uso doméstico y

otros usos de visualización limitados, a menos que

Macrovision Corporation autorice lo contrario. Queda

prohibida la aplicación de ingeniería inversa o

desmontaje.

• Esta unidad incorpora la tecnología CPRM (Content

Protection for Recording Media) de protección de

por el foro DVD. La grabación y copia con esta

grabadora quedará sujeta a lo descrito en la siguiente

página.

Notas acerca de la grabación y edición

Agarrar los discos

• Al grabar o editar material importante, realice pruebas

de antemano para verificar que la grabadora funciona

correctamente.

• Se utiliza para evitar estropear con

suciedad, rayaduras, etc. al utilizar

un disco DVD-RAM/RW/R.

21) No cubra los orificios de aireación para el ventilador

interno.

Toshiba no compensará al usuario por el contenido

que no se grabe o edite debido a un mal fun-

cionamiento del producto o los discos durante su

manejo, así como tampoco será responsable de los

daños secundarios (como pérdida de beneficios o cese

de negocio, etc.) provocados por tales condiciones.

• Al desconectar el cable de alimentación o si se pro-

duce un corte de luz mientras el aparato está funcio-

nando, puede que se borre todo el contenido grabado.

• Según el canal o emisión, si el nivel de entrada de

sonido es excesivo pueden producirse ruidos o puede

que el sonido de grabación esté entrecortado. Ajuste la

configuración inicial del nivel de grabación, si procede.

• Si el programa para el que ha programado una

grabación incluye señales de restricción de copia,

puede que éste no se grabe. Al programar una

grabación, verifique el programa que desea copiar no

está protegido frente a copia.

22) No utilice discos con grietas, deformados o reparados.

Dichos discos podrían romperse fácilmente y provocar

graves lesiones y el mal funcionamiento del aparato.

23) Si observa que sale humo del aparato o que huele a que-

mado, desconecte de inmediato el cable de la toma de

pared. Espere hasta que cese el humo o el olor. A con-

tinuación, diríjase a su distribuidor para que lo revise y

repare. De lo contrario podría producirse un incendio.

24) En caso de tormenta eléctrica, no toque los cables de

conexión ni el aparato.

Cartucho

• This is used to prevent damage by dirt, scratches, etc.

when using a DVD-RAM/RW/R disc.

DVD-RAM, DVD-RW y DVD-R

• Límpielos con un limpiador de discos

DVD-RAM/PD opcional. No utilice

limpiadores ni trapos para CD para

limpiar discos DVD-RAM/DVD-

RW/DVD-R.

25) El aparato incluye plomo, un componente de soldadura

empleado en el PCB que es una sustancia dañina para el

ser humano y el medio ambiente. Al deshacerse del

equipo, siga las normas aplicables en su zona.

DVD-Vídeo, CD

Precauciones de manejo

• Antes de conectar otros componentes a este grabador,

asegúrese de desconectar todos.

• No mueva el grabador mientras está reproduciendo un

disco, ya que éste puede rayarse o romperse y pueden

dañarse las partes internas del grabador.

• No coloque un jarrón de flores lleno de agua o pequeños

objetos metálicos sobre el grabador.

• Limpie la suciedad o la contaminación del disco con

un trapo suave.

Excepciones

VCR Plus+ y PlusCode son marcas registradas de

Gemstar Development Corporation. El sistema VCR

Plus+ está fabricado bajo licencia de Gemstar

Development Corporation.

• Toshiba no se responsabilizará de los daños causados

por incendios, desastres naturales (como rayos, terre-

motos, etc.), acciones de terceros, accidentes, uso

indebido intencionado o no por parte del usuario y

demás usos indebidos.

Precauciones a la hora de manejar discos

• No escriba en el lado imprimido con un bolígrafo o

con un lápiz.

• No coloque la mano sobre la bandeja del disco.

• No coloque nada que no sea un disco en su bandeja.

• La interferencia exterior, como rayos o electricidad estáti-

ca, puede afectar al funcionamiento normal de este

grabador. Si ocurre esto, apague el grabador y enciéndalo

de nuevo con el botón POWER o desconecte y vuelva a

conectar el cable de alimentación en la toma de CA. El

grabador funcionará con normalidad.

• Extraiga el disco y apague el grabador tras su utilización.

• Desconecte el cable de alimentación de CA de su toma

cuando no vaya a utilizar el grabador durante mucho

tiempo.

• Toshiba no se responsabilizará de los daños

adicionales (como pérdida de beneficios o cese

de negocio, modificación o borrado de datos

grabados, etc.) provocados por el uso o

imposibilidad de utilizar este producto.

• Toshiba no se responsabilizará de los daños

que resulten del incumplimiento de las

instrucciones descritas en el manual del

usuario.

• Toshiba no se responsabilizará de cualesquiera

daños que resulten del mal uso, mal fun-

cionamiento por uso simultáneo de este pro-

ducto y el equipo o software conectado del

que Toshiba no sea responsable.

• No utilice pulverizadores o antiestáticos de limpieza

de discos de vinilo. Tampoco utilice productos quími-

cos volátiles, como el benceno o diluyentes.

• No aplique etiquetas ni pegatinas en los discos. (No

utilice discos con cinta adhesiva expuesta o con restos

de pegatinas quitadas.)

• No utilice tapas ni protectores a prueba de rayaduras.

• No utilice discos impresos con impresoras de etique-

tas disponibles en el mercado.

• No cargue discos encorvados ni con fisuras.

• Limpie el disco en línea recta desde el interior al exterior.

104 - Español

Español - 105

Download from Www.Somanuals.com. All Manuals Search And Download.

• DVD-RW (modo VR)

Especificaciones del disco

Utilización de CD-R/RW

COPY PROTECTION

- Se trata de un formato utilizado para grabar datos en

un disco DVD-RAM o DVD-RW. Puede repetir la

grabación, edición, eliminación parcial, creación de lis-

tas de reproducción, etc.

•

Numerosos discos de DVD están codificados con pro-

tección de copia. Por ello, sólo debe conectar el

grabador de DVD y de vídeo directamente al TV, no a

un vídeo. Si lo conecta a un vídeo, se distorsionará la

imagen de discos DVD protegidos contra copia.

Este producto incorpora tecnología de protección de

derechos de autor protegida mediante reivindicaciones

de métodos de ciertas patentes de EE.UU. y otros dere-

chos de propiedad intelectual propiedad de

Macrovision Corporation y de otros propietarios de

derechos. Macrovision Corporation debe autorizar la

utilización de esta tecnología de protección de derechos

de autor, que está concebida para usos caseros y otros

tipos de visualización limitada únicamente, a menos

que autorice lo contrario Macrovision Corporation.

Está prohibido desmontar o invertir la ingeniería.

Está permitida la grabación de programas de televisión,

películas, cintas de vídeo y demás material siempre que

no se violen los derechos de propiedad de terceros u

otros derechos.

• Utilice un disco CD-R/RW de 700MB (80 minutos).

En la medida de lo posible, no utilice discos de 800MB

(90 minutos) o más, pues es posible que el disco no se

lea en la unidad.

• Si el disco CD-R/RW no se grabó como sesión cerrada,

quizá observe un retardo en el principio del tiempo de

reproducción y quizá no se reproduzcan todos los

archivos grabados.

• Algunos discos CD-R/RW no se pueden reproducir

con esta unidad, en función del dispositivo que se uti-

lizó para grabarlos. Para contenidos grabados en

medios de CD-R/RW a partir de CD para uso personal,

la capacidad de reproducción dependerá del contenido

y de los discos.

DVD-Vídeo

- Un disco grabado en este modo no puede escucharse

en un reproductor de DVD existente.

• Un disco versátil digital (DVD) puede contener hasta

135 minutos de imágenes, audio en 8 idiomas y 32

idiomas de subtítulos. Está equipado de compresión

de imágenes MPEG-2 y Dolby 3D envolvente, que

permite disfrutar de imágenes de calidad de cine viva

y más clara en la comodidad de su hogar.

• Cuando cambie de la primera capa a la segunda de un

disco de vídeo DVD de doble capa, quizá exista distor-

sión momentánea en la imagen y en el sonido, lo que

no significa que funcione mal la unidad.

• DVD-RW (modo de Vídeo)

- Se trata de un formato utilizado para grabar datos en

un disco DVD-RW o DVD-R. El disco puede repro-

ducirse en un reproductor de DVD existente una vez

finalizado.

- Si un disco se ha grabado en el modo de vídeo con un

grabador de otra marca pero no se ha finalizado, no

podrá reproducirlo o grabarlo más en este grabador.

Grabación y reproducción de discos DVD-RAM

• Una vez finalizado un DVD-R/RW grabado en el modo

de vídeo, se convierte en DVD-Vídeo.

•

• Los discos DVD-RAM vienen con o sin cartucho. Para

este producto, recomendamos discos DVD-RAM que

vengan con cartuchos.

Grabación y reproducción de discos DVD-R

• Una vez finalizado un DVD-R/RW grabado en el modo

de vídeo, se convierte en DVD-Vídeo.

• Puede grabar en el espacio disponible del disco y

realizar funciones de edición como poner títulos a los

discos y programas y borrar programas antes de

finalizarlos.

• Cuando se borra la programación de un DVD-R, ese

espacio no estará disponible. Una vez que ha grabado

en una zona de un DVD-R, ahí no podrá grabar, inde-

pendientemente de si se borra la grabación o no.

• La unidad tarda aproximadamente 30 segundos en

completar la información de gestión de grabación tras

finalizar ésta.

• Este producto optimiza el DVD-R para cada grabación.

La optimización se realiza cuando empieza la

grabación tras insertar el disco o activar la unidad. La

grabación en el disco puede resultar imposible si la

optimización se realiza demasiadas veces.

CD de audio

• Algunos cartuchos pueden expulsar el disco. Aunque

pueda expulsar el disco, utilice siempre el disco con el

cartucho para garantizar un funcionamiento correcto.

• Los discos DVD-RAM disponen de una lengüeta de pro-

tección contra escritura para evitar la eliminación invol-

untaria de los datos grabados. Con la lengüeta de protec-

ción contra escritura establecida en PROTECT, podrá

reproducir el disco, pero no grabar ni eliminar.

Establezca la lengüeta de protección contra escritura en

UNPROTECT para formatear el disco o borrar datos.

• Asegúrese de que el modo de grabación esté configura-

do en el modo VR, de lo contrario este producto no

podrá reproducir la grabación.

• No puede reproducir un DVD-RAM en la mayoría de

reproductores de DVD por problemas de compatibilidad.

• Sólo pueden reproducirse discos DVD-RAM estándar

Versión 2.0 en esta unidad.

• DVD-RAM grabados en esta unidad quizá no funcio-

nen con otros reproductores de DVD. Para determinar

la compatibilidad con estos discos DVD-RAM, con-

sulte el manual del usuario del reproductor.

Protección

• Un disco de audio donde se graba sonido de 44,1 kHz

PCM.

• Reproduce formato de audio CD-DA y discos CD-R y

CD-RW. Quizá la unidad no pueda reproducir algunos

discos CD-R o CD-RW por el estado de la grabación.

Este grabador de DVD y

vídeo permite proteger el

contenido de los discos,

como se describe a contin-

uación.

• Protección de cartucho:

Con la lengüeta de protec-

ción contra escritura en la posición de protegida, el con-

tenido del disco no puede grabarse, editarse o borrarse.

• Protección de programa: consulte la página 76

“Bloquear la lista de títulos”

• Disco protegido: consulte la página 87 “Protección de

discos”

CD-R/RW

MP3 CD-R/RW

• Sólo pueden reproducirse discos CD-R con archivos

MP3 grabados con el formato ISO 9660 o JOLIET.

• Sólo pueden reproducirse archivos MP3 con la exten-

sión “.mp3” y “.MP3”.

• Para archivos MP3 grabados con velocidad de bits

variable (VBR), de 32 kbps a 320 kbps, el sonido

puede cortarse en ocasiones.

❋

Con este producto no pueden reproducirse discos

DVD-RAM/DVD-RW/DVD-R que sean incompati-

bles con el formato DVD-VÍDEO.

Para obtener información adicional sobre la

grabación de un DVD, consulte al fabricante del

DVD-RAM/DVD-RW/DVD-R.

• La reproducción resultará imposible en algunos casos

por el estado de la grabación.

• Esta unidad puede reproducir discos DVD-R grabados

y finalizados con un grabador de vídeo Samsung DVD.

Quizá no pueda reproducir algunos discos DVD-R en

función del disco y del estado de la grabación.

• Esta unidad es compatible con DVD-RAM sin cartucho o

con él, pero las lengüetas de protección contra escritura

de los discos con cartucho ofrecen más protección en las

grabaciones.

Si se utilizan discos DVD-RAM/DVD-RW/DVD-R de

mala calidad, quizá haya errores en la grabación.

• El intervalo de velocidad de bits reproducible es de 56

Kbps a 320 Kbps.

Grabación y reproducción de discos DVD-RW

• La unidad puede admitir un mínimo de 1.000 archivos

y carpetas.

No utilice los siguientes discos!

• La grabación y la reproducción pueden realizarse en un

disco DVD-RW en el modo de vídeo y en el modo VR.

• Una vez finalizado un DVD-RW grabado en el modo

VR, no podrá grabar más.

• LD, CD-G, CD-I, CD-ROM, DVD-ROM, VCD, DVD+R

and DVD+RW discs should not be used in this product.

[Note]

JPEG CD-R/RW

• Una vez finalizado un DVD-RW grabado en el modo

• Sólo pueden reproducirse archivos JPEG con las exten-

siones “.jpg” y “.JPG”.

• La unidad puede admitir un mínimo de 1.000 archivos

y carpetas.

• El tamaño máximo de JPEG progresivo es 3M píxeles.

• No se admite JPEG DE MOVIMIENTO.

de vídeo, se convierte en DVD-Vídeo.

Disc types that can be played : CD/CD-R/

• En ambos modos, la reproducción puede realizarse

antes y después de la finalización, pero la grabación,

eliminación y edición adicionales no pueden realizarse

tras la finalización.

• Si desea grabar el disco en el modo VR y después en el

modo V, ejecute Format. Tenga cuidado al ejecutar

Format, puesto que pueden perderse todos los datos

grabados.

CD-RW/MP3/JPEG/DVD-Video/DVD-RAM/ DVD-

RW/DVD-R. However, if your DVD-RW/-R disc was

recorded with another device, it may be played only if it

was recorded and finalized in video mode.

• Some commercial discs and DVD discs purchased out-

side your region may not be playable with this prod-

uct. When these discs are played, either “No disc.” or

“Please check the regional code.” will be displayed.

• If your DVD-RW disc is an illegal copy or is not in

DVD video format, it may also not be playable.

• Un disco en blanco DVD-RW se inicializa en el modo

VR cuando se inicializa al principio.

106 - Español

Español - 107

Download from Www.Somanuals.com. All Manuals Search And Download.

Grabación y reproducción simultánea e Imagen dentro de

imagen (PIP)

Características

generales

Antes de leer el

manual del usuario

Cómo utilizar el

grabador de DVD y vídeo

Use la función Time Slip (Grabación y reproducción

simultánea) para ver las imágenes grabadas mientras se real-

iza la grabación (sólo en DVD-RAM). Use la función PIP

para ver las pantallas de reproducción y de grabación

simultáneamente.

Compruebe los siguientes puntos antes de leer el manual

del usuario.

The D-VR3 permite grabar y reproducir imágenes digitales

de alta calidad en discos DVD-RAM/DVD-RW/DVD-R.

También puede editar imágenes digitales en discos DVD-

RAM/DVD-RW.

Paso 1

Selección del tipo de disco

Barrido progresivo de alta calidad

El barrido progresivo produce imágenes de alta resolución y

sin parpadeos. La tecnología de procesador Corrector de

base de tiempos y de circuitos de separación 2D Y/C de 10

bits a 54 MHz DAC ofrece la máxima calidad de grabación y

reproducción de imágenes. (Consulte las páginas 17-18).

Esta unidad puede grabar en los siguientes tipos de discos.

Si desea seguir grabando en el mismo disco o desea editar el

disco tras la grabación, seleccione un tipo de disco regrabable

DVD-RW o DVD-RAM. Si desea guardar la grabación sin

ningún cambio, elija un DVD-R no regrabable.

Iconos que se usarán en el manual

Grabación y reproducción de audio y vídeo digital de alta

calidad

Icono

Término

Definición

Se trata de una función

disponible en DVD o en DVD-

R en el modo de vídeo.

Grabe hasta 12 horas de imágenes con un disco de DVD-

RAM de 9,4 GB de doble cara y hasta 6 horas de imágenes

con un disco DVD-RAM de 4,7 GB, en función del modo de

grabación.

DVD

Se trata de una función

disponible en DVD-RAM.

Varias funciones con una interfaz de uso sencillo

RAM

El sistema de menú integrado y la función de mensajería

permiten realizar las operaciones que desee fácil y cómoda-

mente. Con un disco DVD-RAM o DVD-RW (modo VR)

puede editar imágenes grabadas, crear una lista de reproduc-

ción y editar imágenes en una secuencia concreta según sus

necesidades.

Se trata de una función

disponible en DVD-RW.

Creación de un título de vídeo DVD con un disco DVD-

RW/DVD-R

Se trata de una función

disponible en DVD-R.

Con un the D-VR3, cree su propio título de vídeo DVD en

discos DVD-RW/DVD-R de 4,7 GB.

Se trata de una función

disponible en un CD de datos

(CD-ROM, CD-R o CD-RW).

Formatear el disco para

Paso 2

Se trata de una función

disponible en CD (CR-ROM,

CD-R o CD-RW)

Varias opciones de grabación

JPEG

iniciar la grabación

Seleccione el modo de grabación apropiado (XP, SP, LP o

EP) para satisfacer sus necesidades.

(Consulte las páginas 61-62).

• Modo XP: alta calidad, cerca de 1 hora

• Modo SP: calidad estándar, cerca de 2 horas

• Modo LP: calidad baja, cerca de 4 horas

• Modo EP: calidad inferior, cerca de 6 horas

A diferencia de un VCR, el grabador inicia automáticamente el

formateo cuando se introduce un disco sin utilizar. Esto es nece-

sario para la preparación de la grabación de un disco.

Se trata de una función

disponible en un CD de datos

(CD-ROM, CD-R o CD-RW

donde se graba MP3).

MP3

Utilización de un DVD-RAM

Este tipo de disco puede formatearse en el formato de grabación

de vídeo DVD (modo VR). Puede editar la imagen grabada y

crear una lista de reproducción en una secuencia concreta según

sus necesidades.

Se trata de consejos o instruc-

ciones de la página que pueden

ayudar al funcionamiento.

NOTA

Copiar contenido de la videocámara digital utilizando la

clavija de entrada de DV

Compruebe los elementos

antes de manejar cada función

Utilización de un DVD-RW

Preliminary

Este tipo de disco puede formatearse en el formato de vídeo

DVD (modo Vídeo) o formato de grabación de vídeo DVD

(modo VR). Con un disco no utilizado, aparecerá un mensaje

que pregunta si desea formatear en el modo de VR. Puede repro-

ducir un disco en el modo Vídeo en varios componentes de

DVD. Un disco del modo VR permite una edición más variada.

Grabe imágenes de cámara de vídeo digital en discos DVD-

RAM, DVD-RW, DVD-R utilizando una clavija de entrada DV

(IEEE 1394-4 patillas). (Consulte la página 66).

Acerca de la utilización de este manual del

usuario

1) Familiarícese con las instrucciones de seguridad antes de

utilizar este producto. (Consulte las páginas 2~5)

2) Si ocurre un problema, consulte la Solución de proble-

mas. (Consulte las páginas 93~95)

Utilización de un DVD-R

Este tipo de disco puede formatearse en el formato de vídeo

DVD. Tras completarse el formateo, puede grabar en el disco.

Puede reproducir este tipo de disco en varios componentes de

DVD sólo después de finalizarse.

ꢁ Sólo puede utilizar un formato en un DVD-RW.

ꢁ Puede cambiar del formato de DVD-RW a

Nota

arse ninguna parte o la totalidad de este manual del usuario sin

el permiso escrito previo de Samsung Electronics Co.

otro. Tenga en cuenta que los datos del disco

pueden perderse al cambiar de formato.

108 - Español

Español - 109

Download from Www.Somanuals.com. All Manuals Search And Download.

Método 1: Antena + grabador de DVD

y vídeo + TV: Sin caja de conexiones

Puede grabar canales no codificados seleccionando el canal

en el grabador de DVD y vídeo. Use este método también si

ve canales sin caja de conexiones.

Paso 1: Desembalaje

Introducción rápida

Conexión e

Instalación

La introducción rápida de esta guía le ofrecerá información

suficiente para empezar a utilizar el grabador.

Accesorios

Compruebe los siguientes accesorios suministrados.

Cable de vídeo / audio

Cable RF para TV

Mando a distancia

Pilas para el mando a distancia (tamaño AA)

Manual del usuario

Deseche las pilas conforme a la normativa medioambiental

local. No las tire en su cubo de la basura.

•

Paso 1: Desembalaje

❷

Paso 2: Conexión del cable de antena

❷

Paso 2: Conexión del

cable de antena

Paso 3: Conexión del cable del vídeo

❷

Existen varios modos de conexión del grabador de DVD y

vídeo. Seleccione una de las siguientes conexiones de antena

que se adapte mejor a sus necesidades.

Paso 4: Conexión del cable de audio

❷

Método 2: Antena + caja de conex-

iones + grabador de DVD y vídeo + TV:

Caja de conexiones con muchos

canales codificados

•

Método 1: Antena + grabador de DVD y vídeo + TV: Sin

caja de conexiones

Paso 5: Conexión de dispositivos externos

•

Método 2: Antena + caja de conexiones + grabador de

DVD y vídeo + TV: Caja de conexiones con

muchos canales codificados

❷

•

Método 3: Antena + grabador de DVD y vídeo + caja de

conexiones + TV: Caja de conexiones con

algunos canales codificados

Puede grabar canales seleccionando el canal en la caja de

conexiones. No puede grabar un canal mientras está viendo

otro. Asegúrese de que la caja de conexiones esté encendida.

Paso 6: Conexión del cable de alimentación

❷

ꢁ Si está utilizando una antena fuera del aire que

Paso 7: Preparación del mando a distancia

tiene línea doble plana de 300 ohmios, utilice un

Nota

conector de antena externo (adaptador de 300-75

ohmios: no suministrado) para conectar la antena

al grabador de DVD y vídeo.

ꢁ Si tiene dos antenas (una VHF y la otra UHF), use

un adaptador-combinador UHF/VHF (disponible

en la mayoría de las tiendas de electrónica) para

conectar la antena al grabador de DVD y vídeo.

• Nota sobre el instalador del sistema CATV :

este recordatorio remite al instalador del sistema CATV al

artículo 820-40 de la Ley de Electricidad Nacional

(Sección 54 de la Ley de Electricidad Canadiense, Parte I),

que ofrece pautas para toma de tierra correcta y, en espe-

cial, señala que la toma de tierra del cable debe estar

conectada al sistema de tierra del edificio, lo más cercana

posible al punto de la entrada del cable (siempre que

resulte práctico).

•

Desembalaje . . . . . . . . . . . . . . . . . . . . . . 110

Conexión del cable de antena . . . . . . . . . 111

Conexión del cable del vídeo . . . . . . . . . . 112

Conexión del cable de audio . . . . . . . . . . 114

Conexión de dispositivos externos . . . . . 116

Conexión del cable de alimentación . . . . 117

Preparación del mando a distancia . . . . . 117

110 - Español

Español - 111

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Comparado con el vídeo entrelazado estándar, el barrido

progresivo duplica la cantidad de líneas de haces de vídeo

alimentadas al TV, produciendo una imagen más estable,

sin parpadeos y clara que el vídeo entrelazado. La clavija

de salida del vídeo de barrido progresivo se utiliza en el

modo de salida progresivo. Esto sólo está disponible para

televisores que admiten el barrido progresivo.

Los consumidores deben tener en cuenta que no todos los

televisores de alta definición son totalmente compatibles

con este producto y pueden aparecer artefactos en la ima-

gen. En caso de problemas de imágenes de barrido progre-

sivo de 525, se recomienda que el usuario cambie la conex-

ión a la salida de “definición estándar”. Si existen pregun-

tas relativas a la compatibilidad del TV con esta unidad,

póngase en contacto con nuestro centro de servicio al

cliente 1-800-SAMSUNG.

Método 3: Antena + grabador de

DVD y vídeo + caja de conexiones

+ TV: Caja de conexiones con

algunos canales codificados

Método 3: Conexión a clavijas de

entrada de vídeo de componente

(Y,CB/TB,CR/PB) en el modo 480i

Método 2: Conexión a una clavija

de entrada de S-vídeo

Conecte un cable de S-vídeo (no suministrado) entre la clav-

ija de SALIDA de S-VÍDEO del grabador de DVD y vídeo y la

clavija de ENTRADA de VÍDEO (amarillo) del TV (o ampli-

ficador AV).

Ya puede disfrutar de imágenes de gran calidad. S-Vídeo

separa el elemento imagen en señal de blanco y negro (Y)

y color (C), para mostrar imágenes más nítidas que el

modo de entrada de vídeo tradicional.

1. Conecte cables de vídeo de componente (no suministrado)

entre las clavijas de SALIDA de VÍDEO de COMPO-

NENTE del grabador de DVD y vídeo y las clavijas de

ENTRADA de VÍDEO de COMPONENTE del TV (o

amplificador AV).

2. Asegúrese de que el disco se ha detenido completamente

antes de cambiar el modo.

Si no aparece algo en la pantalla del panel frontal, será el

modo 480i.

Puede grabar canales no codificados seleccionando el canal

en la caja de conexiones. No puede grabar canales codifica-

dos que requieran una caja de conexiones.

•

Método 1: Conexión a una clavija

de entrada de vídeo

Conecte un cable de vídeo (amarillo) entre la clavija de SAL-

IDA de VÍDEO (amarillo) del grabador de DVD y vídeo y la

clavija de ENTRADA de VÍDEO (amarillo) del TV (o ampli-

ficador AV).

•

Disfrutará de imágenes de calidad normal.

Conecte los cables de audio (blanco y rojo) entre la clavija

de SALIDA DE AUDIO ANALÓGICO del grabador de

DVD y vídeo y la clavija de ENTRADA DE AUDIO del TV

( o amplificador AV).

Paso 3: Conexión del

cable del vídeo

•

Disfrutará de reproducción de color de imágenes de alta

calidad. El vídeo de componente separa el elemento de

imagen en señales blancas y negras (Y), azules (Pb) y rojas

(Pr) para presentar imágenes más claras y limpias.

Existen varios modos de conexión del grabador de DVD y

vídeo. Seleccione uno de los siguientes métodos de conexión

de vídeo que mejor le convenga.

•

Método 1: Conexión a una clavija de entrada de vídeo

Método 2: Conexión a una clavija de entrada de S-vídeo

Método 3: Conexión a clavijas de entrada de vídeo de

componente en el modo 480i

Método 4: Conexión a clavijas de entrada de vídeo de

componente en el modo 480p

ꢁ Asegúrese de que coincidan las conexiones con

códigos de color. Las clavijas de salida de compo-

Nota

nentes Y, Pb y Pr del grabador de DVD y vídeo

deben estar conectadas a las clavijas exactas de

entrada de componentes correspondientes en el

TV, de lo contrario aparecerán imágenes rojas o

azules en la pantalla de TV.

•

Modos de salida S-vídeo, vídeo de componentes y

progresivo

ꢁ Asegúrese de que las clavijas de salida de audio

derecha e izquierda del grabador de DVD y vídeo

estén conectadas a las clavijas de entrada de audio

izquierda y derecha del TV, respectivamente.

(Página 18)

•

La salida de S-vídeo y vídeo de componentes sólo están

disponibles si su TV admite entrada de S-vídeo o de vídeo

de componentes, respectivamente.

Si no funciona la salida de S-Vídeo o de vídeo de compo-

nentes, compruebe las conexiones del TV y la configuración

de la selección de entrada del TV.

112 - Español

Español - 113

Download from Www.Somanuals.com. All Manuals Search And Download.

Método 4: Conexión a clavijas de

entrada de vídeo de componente

(Y,CB/TB,CR/PB) en el modo 480p

Método 3: Conexión con un amplifi-

cador AV que tiene clavija de entra-

da digital

Método 2: Conexión a un amplifi-

cador estéreo con clavijas de

entrada analógica

Paso 4: Conexión del

cable de audio

Si su amplificador AV sólo tiene un descodificador Dolby

Digital o DTS y una clavija de entrada digital, utilice esta

conexión. Para disfrutar de sonido Dolby Digital o DTS, con-

figure los ajustes de audio. (Consulte la página 28)

Su TV debe admitir la entrada de barrido progresivo para

poder ver la salida de vídeo 480p.

Si su amplificador estéreo sólo tiene clavijas de entrada de

audio (Izda. y dcha.), use las clavijas de salida de audio

analógico.

1. Conecte cables de vídeo de componente (no suministrado)

entre las clavijas de SALIDA de VÍDEO de COMPO-

NENTE del grabador de DVD y vídeo y las clavijas de

ENTRADA de VÍDEO de COMPONENTE del TV (o

amplificador AV).

Existen varios modos de conexión del grabador de DVD y

vídeo. Seleccione la conexión de audio que mejor le convenga.

•

Método 1 : Conexión a un TV

Método 2 : Conexión a un amplificador estéreo (salida de

audio analógica o digital)

Método 3 : Conexión con un amplificador AV que tiene

clavija de entrada digital.

2. Pulse el botón Progressive en el panel frontal. Se muestra

el mensaje "Pulse "Sí" para confirmar el modo de rastreo

progresivo. De lo contrario, pulse “No”. Si desea el modo

480P, seleccione Sí. Si aparece “480P” en la pantalla del

panel frontal, ahora el grabador de DVD y vídeo fun-

cionará en el modo 480P. Asegúrese de que el disco se ha

detenido completamente antes de cambiar el modo.

•

Fabricado con licencia de Dolby Laboratories. “Dolby” y

el símbolo de doble D son marcas comerciales de Dolby

Laboratories.

“DTS” y “DTS Digital Out” son marcas comerciales de

Digital Theater Systems, Inc.

Método 1: Conexión a un TV

Esta conexión utilizará los altavoces del TV.

ꢁ Asegúrese de que coincidan las conexiones con

códigos de color. Es decir, las clavijas de salida de

Nota

componentes Y, Pb y Pr del grabador de DVD y

vídeo deben estar conectadas a las clavijas exactas

de entrada de componetes correspondientes en el

TV, de lo contrario aparecerán imágenes rojas o

azules en la pantalla de TV.

ꢁ

Una vez seleccionado el modo de salida del vídeo 480p,

se deshabilitarán las salidas Vídeo, S-Vídeo y 480i.

ꢁ Asegúrese de que las clavijas de salida de audio

derecha e izquierda del grabador de DVD y vídeo

estén conectadas a las clavijas de entrada de audio

izquierda y derecha del TV, respectivamente.

(Página 19)

114 - Español

Español - 115

Download from Www.Somanuals.com. All Manuals Search And Download.

Método 2: Conexión de una

videocámara a los jacks LINE IN 2

También puede utilizar los jacks LINE IN 2 del panel frontal

de la grabadora de DVD - VCR. Puede grabar desde el equipo

conectado.

Al insertar una fuente de entrada en LINE IN 2 mientras ve la

televisión, la entrada cambia automáticamente a LINE IN 2.

Paso 5: Conexión de

dispositivos externos

Paso 7: Preparación

del mando a distancia

Paso 6: Conexión del

cable de alimentación

Esto permite conectar el grabador de DVD y vídeo a otros

dispositivos externos y ver o grabar sus salidas.

Tras completar todas las conexiones, enchufe el cable de ali-

mentación a la toma.

Instale las pilas en el mando a distancia

•

Abra la tapa de las pilas en la parte posterior del mando a

distancia.

•

Método 1 : Conexión de un VCR, Receptor (STB) o reproduc-

tor de DVD a las clavijas de ENTRADA DE LÍNEA

1 DE AUDIO/VÍDEO.

“AUTO” parpadeará en la pantalla del panel frontal. Esto

significa que el tiempo actual se está configurando

automáticamente (Auto Program) mediante la antena con

conexión. La configuración puede durar varios minutos.

• Inserte dos pilas AAA. Asegúrese de que las polaridades (+

y -) sean correctas.

Cierre la tapa de las pilas.

•

• Método 2 : Conexión de una videocámara a los jacks LINE

IN 2.

Si el mando a distancia no funciona correcta-

mente:

•

Método 3 : Conexión de una videocámara a la clavija de

Cuando funciona con normalidad, la hora actual se configura

automáticamente y aparece en la pantalla del panel frontal.

ENTRADA DE DV.

•

Compruebe la polaridad + - de las pilas (pila seca)

Compruebe si las pilas están descargadas.

Compruebe si hay algún obstáculo que bloquee al sensor

remoto.

Si aparece “——”, significa que ha fallado la configuración

de la hora.

En ese caso, configure la hora mediante la configuración de

la hora manual, como se ve en las páginas 25-26.

Method 1 : Conexión de un VCR, un

descodificador o reproductor de DVD

a los jacks AUDIO/VIDEO LINE IN 1.

•

Compruebe si hay alguna luz fluorescente cerca.

Conexión de un VCR o un dispositivo externo a los jacks

AUDIO/VIDEO LINE IN 1 de la grabadora de DVD - VCR.

Puede grabar programas de copia libre desde un equipo

conectado (VCR, descodificador o DVD).

Deshágase de las pilas conforme a la normativa medioambi-

ental local. No las tire a la basura.

Método 3: Conexión de una videocá-

mara a la clavija de ENTRADA DE DV

Si la videocámara tiene una clavija de salida de DV, conéctela

a la clavija de entrada de DV del grabador de DVD y vídeo.

• Si su videocámara tiene una clavija de salida de DV, con-

sulte la página 73 para obtener información adicional.

Cada vez que desenchufe el cable de alimentación de la toma

de pared y lo vuelva a enchufar, se realizará el ajuste

automático de la hora.

No exponga el sensor remoto de la grabadora a una fuente de

luz fuerte como la luz del sol u otra fuente de iluminación.

De lo contrario, tal vez no pueda controlar la grabadora

desde el mando a distancia.

ꢁ

También puede utilizar los jacks LINE IN 2 del panel

frontal de la grabadora de DVD - VCR.

Nota

• Algunos modelos de cámaras digitales con formato DV

puede que acepten un formato de compresión distinto. En

tal caso, no podrá grabar desde tales equipos.

• Según el modelo de cámara de vídeo digital con formato

DV, puede que la grabación no funcione correctamente o

que algunas funciones queden inhabilitadas.

ꢁ Cuando se conecta la clavija de S-Vídeo y de

Vídeo, la clavija de S-Vídeo tendrá prioridad. La

selección de línea se realizará automáticamente.

ꢁ El contenido protegido contra copia no podrá

grabarse.

116 - Español

Español - 117

Download from Www.Somanuals.com. All Manuals Search And Download.

Para determinar si el televisor es compatible, siga estas

instrucciones.

Configuración del mando a distancia

El mando a distancia del vídeo funcionará con televisores

Samsung y marcas compatibles.

1. Encienda el televisor.

2. Apunte con el mando a distancia al televisor.

3. Mantenga pulsado el botón TV y escriba el código de dos

cifras correspondiente a la marca del televisor, pulsando los

botones numéricos correspondientes.

STANDBY

TV ON / STANDBTY

Marca

Código

Marca

Código

08, 13

TOSHIBA

RCA/GE

SONY

SHARP NEW

SANYO

TV MUTE

AUDIO

MAGNAVOX

GOLDSTAR

SAMSUNG

ZENITH

100

SELECT

INPUT SEL.

MITSUBISHI

JVC

DVD

VCR

VOL

CH / TRK

OPEN/CLOSE

VCR Plus+

/ ADV SKIP

HITACHI

PANASONIC

MARKER

07, 15

PIONEER

Resultado: Si el televisor es compatible con el mando a dis-

tancia, se apagará.

Ahora está programado para funcionar con el

mando a distancia.

ꢀ Si se indican varios códigos para la marca del tele-

RETURN

CLEAR

visor, pruebe con cada uno hasta que encuentre el

Nota

DISPLAY

REC

VCR SUBTITLE

REC SPEED

REC PAUSE

TIME SLIP

que funciona.

DVD

VCR

COPY

PIP

A continuación, podrá controla el televisor utilizando estos

botones.

Botón

Función

POWER

Utilizado para encender y apagar el televisor.

INPUT SEL. Utilizado para seleccionar una fuente externa.

VOL + o -

CH (

TV MUTE

Utilizado para ajustar el volumen del televisor.

Utilizado para seleccionar el canal necesario.

Utilizado para encender y apagar el sonido.

)

ꢀ Las funciones no necesariamente estarán operativas

en todos los televisores. Si encuentra problemas,

maneje el televisor directamente.

Nota

Printed in Korea

BY634781(02)

118 - Español

Download from Www.Somanuals.com. All Manuals Search And Download.

Texas Instruments Power Supply MSC1210 User Manual
Thermo Products Furnace OH11 105E User Manual
Toshiba Satellite TV System P25 Series User Manual
TP Link Network Router TL R488T User Manual
Univex Headphones Wireless Headset System User Manual
Vanguard Managed Solutions Network Card Daughtercard Header User Manual
ViewSonic Laptop VS12933 User Manual
ViewSonic Projector PJ758 PJ759 PJ760 User Manual
Viper Automobile Alarm 3303 User Manual
Wagan Welding System 9925 User Manual