VB9060CMZ.NA1UTT_RV0004T_ENG
DVD VIDEO PLAYER &
VIDEO CASSETTE RECORDER
SD-KV540SU
OWNER’S MANUAL
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
©2005 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
11. Only use attachments/accessories specified by
the manufacturer.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
13. Unplug this product during lightning storms or
when unused for long periods of time.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ven-
tilation is provided or the manufacturer’s instructions
have been adhered to.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
• Still Picture and Frame-by-Frame Playback .21
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .22
• CM SKIP (Commercial Skip) . . . . . . . . . . . . .22
• Blank Search . . . . . . . . . . . . . . . . . . . . . . . .22
• VISS (VHS Index Search System) . . . . . . . .22
VHS Hi-Fi Stereo / MTS Broadcast . . . . . . . . . .23
VCR Tape Recording . . . . . . . . . . . . . . . . . .24-27
• Basic Instructions . . . . . . . . . . . . . . . . . . . . .24
• Timer Recording . . . . . . . . . . . . . . . . . . .24-25
• One-touch Timer Recording . . . . . . . . . . . . .26
• Recording from External Components . . . . .26
• Copying from DVD to VCR . . . . . . . . . . . . .27
On-Screen Display - VCR . . . . . . . . . . . . . . . . .27
Additional VCR Information . . . . . . . . . . . . . . . .28
• VCR Auto Play System . . . . . . . . . . . . . . . . .28
• S-VHS Quasi Playback (SQPB) . . . . . . . . . .28
• Easy Information . . . . . . . . . . . . . . . . . . . . .28
Safety Precautions . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFETY INSTRUCTIONS . .3
Table of contents . . . . . . . . . . . . . . . . . . .4
Before Use . . . . . . . . . . . . . . . . . . . . . .5-11
Moisture Condensation . . . . . . . . . . . . . . . . . . . .5
Symbol Used in this Manual . . . . . . . . . . . . . . . .5
About the
Symbol Display . . . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . . . .6
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . .6
Regional code . . . . . . . . . . . . . . . . . . . . . . . . . .7
Notes on Copyrights . . . . . . . . . . . . . . . . . . . . . .7
About the Remote Control . . . . . . . . . . . . . . . . . .7
Selecting the Viewing Source . . . . . . . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Display Window . . . . . . . . . . . . . . . . . . . . . . . . . .9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .11
Operation with DVD and Video CD . .29-32
Playback Setup . . . . . . . . . . . . . . . . . . . . . . . . .29
General Features . . . . . . . . . . . . . . . . . . . . .29-31
• Moving to another TITLE . . . . . . . . . . . . . . .29
• Moving to another CHAPTER/TRACK . . . . .29
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .29
• Still Picture and Frame-by-Frame Playback .30
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
• Time Search . . . . . . . . . . . . . . . . . . . . . . . . .30
• Marker Search . . . . . . . . . . . . . . . . . . . . . . .30
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . .30
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
• Changing the Audio Channel . . . . . . . . . . . .31
• Last Scene Memory . . . . . . . . . . . . . . . . . . .31
• Instant Replay . . . . . . . . . . . . . . . . . . . . . . .31
• Screen Saver . . . . . . . . . . . . . . . . . . . . . . . .31
Special DVD Features . . . . . . . . . . . . . . . . . . .31
• Checking the contents of DVD discs: Menus 31
• Title Menu . . . . . . . . . . . . . . . . . . . . . . . . .31
• Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . .31
• Camera Angle . . . . . . . . . . . . . . . . . . . . . .31
• Changing the Audio Language . . . . . . . . . . .31
Connections . . . . . . . . . . . . . . . . . . .12-14
Connecting an Antenna or Cable TV . . . . . . . . .12
Basic TV Connections . . . . . . . . . . . . . . . . .12-13
Optional TV Connections . . . . . . . . . . . . . . . . .13
Audio Connection for DVD . . . . . . . . . . . . . .13-14
Initial Settings - VCR . . . . . . . . . . . . .15-16
General Operation . . . . . . . . . . . . . . . . . . . . . .15
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . .15
• Manual Clock Set . . . . . . . . . . . . . . . . . . . . .15
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• Auto Channel Programming . . . . . . . . . . . . .16
• To Add or Erase Channels . . . . . . . . . . . . . .16
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Initial Settings - DVD . . . . . . . . . . . . .17-20
General Operation . . . . . . . . . . . . . . . . . . . . . .17
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . .17
• Menu Language . . . . . . . . . . . . . . . . . . . . .17
• Disc Audio / Subtitle / Menu . . . . . . . . . . . .17
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . .18
• Display Mode . . . . . . . . . . . . . . . . . . . . . . .18
• Progressive Scan . . . . . . . . . . . . . . . . . . . .18
• Video Output . . . . . . . . . . . . . . . . . . . . . . . .18
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
• Dolby Digital / DTS / MPEG . . . . . . . . . . . . .19
• Sample Freq. (Frequency) . . . . . . . . . . . . . .19
• DRC (Dynamic Range Control) . . . . . . . . . .19
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . .19
• B.L.E. (Black Level Expansion) . . . . . . . . . . .19
LOCK (Parental Control) . . . . . . . . . . . . . . . . . .20
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
• Password (Security Code) . . . . . . . . . . . . . .20
• Area Code . . . . . . . . . . . . . . . . . . . . . . . . . .20
• Subtitles
. . . . . . . . . . . . . . . . . . . . . . . . . .31
On-Screen Display - DVD . . . . . . . . . . . . . . . . .32
Maintenance and Service . . . . . . . . . . . . . . . . .32
Playing an Audio CD or
MP3 / WMA Disc . . . . . . . . . . . . . . . .33-35
Audio CD and MP3 / WMA Disc Features . . . . .34
• Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
• Moving to another Track
• Repeat Track/All/Off . . . . . . . . . . . . . . . . . . .34
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
• Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . .34
Programmed Playback . . . . . . . . . . . . . . . . . . .35
. . . . . . . . . . . . . .34
Viewing a JPEG Disc . . . . . . . . . . . . . .36
• Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .36
• Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .36
• Moving to another File . . . . . . . . . . . . . . . . .36
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
• To rotate picture . . . . . . . . . . . . . . . . . . . . . .36
Operation with tape . . . . . . . . . . . . .21-28
VCR Tape Playback . . . . . . . . . . . . . . . . . . .21-22
• Basic Instructions . . . . . . . . . . . . . . . . . . . . .21
• Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .21
• Manual Tracking . . . . . . . . . . . . . . . . . . . . . .21
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Language and Area Code List . . . . . . . .37
Troubleshooting . . . . . . . . . . . . . . . .38-39
Specifications . . . . . . . . . . . . . . . . . . . .40
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference.
About the
Symbol Display
“
” may appear on your TV display during operation
and indicates that the function is not permitted by this
unit or the disc.
This manual provides information on the operation and
maintenance of your DVD+VCR. Should the unit require
service, contact an authorized service location.
Notes on Discs
Moisture Condensation
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on the
surface. Never stick paper or tape on the disc.
Never operate the DVD+VCR immediately after moving
it from a cold location to a warm location. Leave it for
two or three hours without operating it. If you use the
DVD+VCR in such a situation, it may damage discs/
tapes and internal parts.
Symbol Used in this Manual
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
The exclamation point alerts you to the pres-
ence of important operating and maintenance/
servicing instructions.
Cleaning Discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Note:
Tip:
Indicates special notes and operating features.
Indicates tips and hints for making the task
easier.
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
DVD
DVD
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
Types of Playable Discs
DVD
(8 cm/12 cm disc)
WMA
Windows media audio file. A type of coding / decoding
developed by Microsoft Corp.
Video CD (VCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm/12 cm disc)
JPEG
Joint Pictures Expert Group. JPEG is a compressed file
format that allows you to save images with no limit on
the number of colors.
In addition, this unit plays DVD-R, DVD+R, DVD-RW,
DVD+RW, SVCD, and CD-R / CD-RW that contains
audio titles, MP3, WMA, and/or JPEG files.
PBC: Playback Control (Video CD only)
Notes:
Playback control is available for Video CD (VCD) ver-
sion 2.0 disc formats. PBC allows you to interact with
the system via menus, search functions, or other typical
computer-like operations. Moreover, still pictures of high
resolution can be played if they are included in the disc.
Video CDs not equipped with PBC (Version 1.1) operate
in the same way as audio CDs.
•
Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD -R, DVD +R, DVD -
RW, DVD +RW) disc itself, some CD-R/RW (or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs can-
not be played on the unit.
•
•
•
Only plays if DVD-RW is recorded in Video mode
and has been finalized.
Title (DVD only)
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in mal-
functions.
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documen-
tary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
assigned a reference number enabling you to locate it
easily.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally programmed by software manufac-
turers. This unit plays DVDs and Video CDs according
to disc content designed by the software manufacturer,
therefore some playback features may not be available
or other functions may be added.
Because of problems and errors that can occur during
the creation of DVD software and/or the manufacture of
DVD discs, Toshiba cannot guarantee that this player
will play every feature of every DVD bearing the DVD
logo. As one of the creators of DVD technology, Toshiba
DVD+VCR players are manufactured using the highest
standards of quality, and as a result, such incompatibili-
ties are rare. If you happen to experience any difficulty
playing a DVD on a Toshiba DVD+VCR player, please
feel free to call our Contact listed in “Limited United
States Warranty” (see page 41).
Chapter (DVD only)
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters may
not be recorded.
Scene (VCD)
On a video CD with PBC (playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want. A scene is composed
of one or several tracks.
Track
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you to
locate the track you want. DVD discs allow one track of
video (with multiple angles) and several tracks of audio.
Disc-related terms
VCD (Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80 min-
utes (700 MB disc) of MPEG-1 full-motion video along
with quality stereo sound.
MPEG
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Regional code
About the Remote Control
This DVD+VCR is designed and
manufactured for playback of
region “1” encoded DVD soft-
ware. This unit can play only DVD
discs labeled “1” or “ALL”.
Operation Range
Point the remote control at the remote sensor and press
the buttons.
1
ALL
Distance: About 23 ft (7 m) from the front of the remote
sensor.
Angle:
About 30° in each direction of the front of the
remote sensor.
Notes on Regional Codes
ꢀ Most DVD discs have a globe with one or more num-
bers in it clearly visible on the cover. This number
must match your DVD+VCR’s regional code or the
disc cannot play.
ꢀ If you try to play a DVD with a different region code
from your player, the message “Check Regional
Code” appears on the TV screen.
Battery installation
Detach the battery cover on the rear of
the remote control, and insert two
(R03/AAA) size batteries with 3 and #
aligned correctly.
Caution
Never throw batteries into a fire.
Notes on Copyright
Notes:
The unauthorized recording, use, distribution, or revi-
sion of television programs, videotapes, DVDs and
other materials, is prohibited under the Copyright Laws
of the United States and other countries, and may sub-
ject you to civil and/or criminal liability.
•
•
•
Be sure to use AAA size batteries.
Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with the environ-
ment in mind. Always dispose of batteries in accordance
with applicable laws and regulations.
This product incorporates copyright protection technolo-
gy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be author-
ized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless other-
wise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
•
•
If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combina-
tion.
•
Always remove batteries from remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
Notice for Progressive Scan Use
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COM-
PATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 525p DVD+VCR, PLEASE CONTACT
Selecting the Viewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
•
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights and output source of DVD deck is viewed on
the TV screen.
•
If you want to view VCR deck output source:
OUR CUSTOMER SERVICE CENTER.
Press VCR until VCR indicator in the display window
lights and output source of VCR deck is viewed on
the TV screen.
Notes:
•
If you insert a disc while the DVD+VCR is in the VCR
mode, the DVD+VCR will switch to DVD mode automati-
cally.
•
If you insert a cassette tape without prevention tab while
the DVD+VCR is in the DVD mode, the DVD+VCR will
switch to VCR mode automatically.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Disc Tray (DVD deck)
Insert a disc here.
Cassette Compartment (VCR deck)
Insert a video cassette here.
Remote Sensor
Point the DVD+VCR remote control here.
Display Windows
OPEN/CLOSE
Opens or closes the disc tray.
X (P/STILL)
Pause playback or recording.
Press repeatedly for frame-by-frame
playback.
x
Stops playback of the disc or tape.
EJECT
Ejects the tape in the VCR deck.
CH (V/v)
To scan up or down through memorized channels.
M
DVD: Skip to next chapter or track. Press and hold for two
seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast
forward picture search.
z REC
To record normally or to activate
One-touch Timer Recording by
repeated presses.
N
Starts playback of a disc or tape.
m
- DVD: Skip to beginning of current chapter or track, press twice in quick
successions to go to previous chapter or track. Press and hold button for
about two seconds to search backward.
- VCR: Rewinds the tape during the stop mode or for fast reverse picture
search.
DVD/VCR
Select one of your output sources to view on the TV
screen between DVD and VCR.
COPY
Press to copy a DVD in
the DVD deck to a VHS
tape in the VCR deck.
LINE IN 2 (VIDEO/AUDIO (L/R))
Connect to the audio/video output of an
external source (Audio system, TV/Monitor,
Another VCR).
ON/STANDBY I/1
Switches the DVD+VCR ON and OFF.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
The DVD deck is selected.
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
Indicates when the Progressive scan is active.
Indicates repeat mode.
DVD+VCR is in timer recording or a timer
recording is programmed.(VCR part only)
A cassette is in the VCR deck.
The VCR deck is selected.
DVD
VCR
REC
PM
TV
Lights when TV mode is active (See page 24.)
Indicates PM time. (AM is not displayed.)
DVD+VCR is Recording.
(VCR part only)
Indicates total playing time, elapsed time, remaining time
or current deck status (Playback, Pause, etc).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR,
Camcorder).
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio inputs.
AC Power Cord
Plug into the power source.
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
COAXIAL (DIGITAL AUDIO OUT jack) (DVD OUT)
Connect to digital (coaxial) audio equipment.
ANT.IN
Connect the VHF/UHF/CATV antenna to this terminal.
RF. OUT
Connect to a TV with RF coaxial inputs.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause
permanent damage to the unit.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER (I/1)
Switches DVD+VCR ON and OFF.
EJECT, OPEN/CLOSE (
- Ejects the tape in the VCR deck.
)
TV/VCR ꢀ
To view channels selected by the VCR
tuner or by the TV tuner.
- Opens and closes the disc tray.
INPUT SELECT/INSTANT REPLAY
- Selects the VCR deck’s source
(Tuner, LINE 1, or LINE 2).
DVD ꢀ
Select the DVD+VCR function mode to
DVD.
- Replays through 10 seconds of DVD
playback.
MENU
VCR ꢀ
Select the DVD+VCR function mode to
VCR.
Accesses menu on a DVD disc.
DISPLAY
Accesses On-Screen Display.
SKIP (. / >)
Skip to beginning of current chapter or track,
press twice in quick successions to go to
previous chapter or track. Skip to next chap-
ter or track.
CLOCK/COUNTER
Switches among the clock, tape counter
and tape remaining modes on the dis-
play.
RETURN (O)
b/B/v/V
- Selects menu options.
- CH/TRK (v/V): Selects VCR
channels. Adjusts manually the tape’s
picture onscreen.
- Removes the setup menu.
- Displays the menu of a video CD with
PBC.
STOP (x)
Stops playback or recording.
VCR MENU/SETUP
Accesses or removes DVD Setup menu
and VCR menu.
PROGRAM
Places a track on the program list.
ENTER
Confirms menu selections. Displays
functions on the TV screen.
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
PAUSE/STEP (X/C)
- Pause playback or recording.
- Press repeatedly for frame-by-frame
playback.
ꢀ AUDIO
Selects an audio language (DVD) or an
audio channel (VCD).
REW (m) ꢀ
- For fast reverse picture search.
- Rewinds the tape during the STOP mode.
ꢀ SUBTITLE
Selects a subtitle language.
ꢀ ATR
PLAY (N) ꢀ
Starts playback.
Adjusts automatically the tape’s picture
onscreen.
FWD (M) ꢀ
- For fast forward picture search.
- Advances the tape during the STOP mode.
ꢀ ANGLE
Selects a DVD camera angle, if available.
0-9
Selects numbered options in a menu.
ꢀ ZOOM
Enlarges DVD video image.
REPEAT ꢀ
Repeat chapter, track, title or all.
ꢀ BLANK/SEARCH
Finds end points of recording.
RANDOM ꢀ
Plays tracks in random order.
ꢀ MARKER
Marks any point during playback.
CM SKIP ꢀ
Fast forwards picture search through
30 seconds of recording.
ꢀ SEARCH/VISS
- Displays Marker Search menu.
- Enters the VISS function mode.
A-B RPT ꢀ
Repeats sequence between two points (A
and B).
ꢀ TOP MENU
Displays the disc’s Title menu, if
available.
SP/SLP ꢀ
Selects recording speed.
ꢀ REC/OTR
SLOW (y)ꢀ
Forward slow playback of tape and disc.
Records normally or activates One
touch Timer Recording with repeated
presses.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Depending on your TV and other equipment there
are various ways you can connect the player.
Please refer to the manuals of your TV, VCR, stereo
system or other devices as necessary for additional
connection information.
b
Cable TV:
If your cable connection has no converter or descram-
bler, unscrew the cable from your TV and attach it to the
ANT.IN jack on the DVD+VCR. If a converter is required
connect a coaxial cable from the wall jack to the IN con-
nector on the converter, and a coaxial cable from the
OUT connector on the converter to the ANT IN on your
DVD+VCR. This cable hookup permits both TV and
DVD+VCR operation.
Notes:
•
The picture and sound of a nearby TV, VCR, or radio may
be distorted during playback. Position the units away from
each other or turn off the unit after removing the disc.
•
•
Make sure the DVD+VCR is connected directly to the TV
and tune the TV to the correct video input channel.
To view or record a CATV channel
Do not connect the DVD+VCR’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system. Do not
connect the DVD+VCR via another VCR. The DVD image
could be distorted by the copy protection system.
1. Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
2. Set the DVD+VCR channel selector to the cable out-
put channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
Connecting an Antenna
or Cable TV
•
With this connection, you cannot record one program while
viewing another.
a Antenna
:
•
If you are using a cable box to tune channels, it is not nec-
essary to do Auto Channel Set.
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm coaxi-
al cable connect it directly to the jack marked ANT.IN on
your DVD+VCR. If your antenna cable is flat connect it
to a 300-ohm to 75-ohm antenna adaptor (not supplied)
and slip the adaptor over the ANT.IN jack. Don’t attempt
to screw it into to the DVD+VCR.
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of TV
ANTENNA
INPUT
VIDEO
INPUT
AUDIO INPUT
a
Antenna
Antenna
R
L
R
V
A1
OR
OR
Rear of DVD+VCR
C
A2
S
Rear of DVD+VCR
b
Y
Pr
Pb
R
L
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
AUDIO INPUT
S-VIDEO
INPUT
Rear of TV
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
RF coaxial connection
Component Video (ColorStream®) / Progressive
Scan (ColorStream Pro®) connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
If your television is a high-definition or “digital ready” tel-
evision, you may take advantage of the DVD+VCR’s
progressive scan output for the highest video resolution
possible.
How to set the DVD+VCR’s RF output
channel
1. Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD+VCR to the corre-
sponding in jacks on the TV using an
1. When the DVD+VCR is turned off, press and hold
CH (V/v) on the front panel for more than five sec-
onds. “RF03” or “RF04” appears in the display win-
dow.
optional Y Pb Pr cable (C).
2. Connect the Left and Right AUDIO OUT jacks of the
DVD+VCR to the audio left/right in jacks on the TV
using the supplied audio cables (A2) .
2. Press CH (V/v) to change the RF output channel
(RF03 or RF04). Tune the TV to this channel.
Notes:
3. Turn off the DVD+VCR.
•
Set the Video Output to “YPbPr” and Progressive Scan to
“On” on the setup menu for progressive scan signal, see
page 18.
Audio/Video connection
•
•
When you use Component Video signal, set the
Progressive Scan to “Off” on the setup menu.
1. Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using the
video cable supplied (V).
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack and S-VIDEO OUT
jack).
2. Connect the Left and Right DVD/VCR AUDIO OUT
jacks on the DVD+VCR to the audio left/right in
jacks on the TV (A1) using the supplied audio
cables.
•
•
Do not use Component Video jacks and S-VIDEO jack at
the same time, the picture quality will be poor.
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled.
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
Audio Connection for DVD
Optional TV Connections
You can only listen to DVD playback using COAXIAL
(X) and AUDIO OUT (A2) connections. The tuner and
VCR can only be heard through the RF.OUT (R) or
DVD/VCR AUDIO OUT (A1) jack. (See page 12.)
These connections support only DVD playback. The
tuner and VCR can only output through the RF.OUT (R)
or DVD/VCR OUT (A, V) jacks.
Connecting to an amplifier equipped with two chan-
nel analog stereo or Dolby Pro Logic II/Pro Logic
S-Video connection
1. Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on the TV using the optional
S-Video cable (S).
Connect the Left and Right AUDIO OUT (or DVD/VCR
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system using the audio cables (A1, A2) supplied.
2. Connect the Left and Right AUDIO OUT jacks of the
DVD+VCR to the audio left/right in jacks on the TV
using the supplied audio cables (A2).
Note:
Set the Video Output to “S-VIDEO” on the setup menu for
S-VIDEO signal, see page 18.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Connecting to an amplifier equipped with two channel
digital stereo (PCM) or to an Audio/Video receiver
equipped with a multi-channel decoder (Dolby Digital,
MPEG 2, or DTS)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
1. Connect one of the DVD+VCR’s DIGITAL AUDIO
OUT jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
2. You will need to activate the DVD+VCR’s digital out-
put. (See “AUDIO” on page 19).
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Connect the VCR IN LINE 1 or LINE IN 2 jacks on the
DVD+VCR to the audio/video out jacks on your acces-
sory component, using the optional audio/video cables.
(Refer to page 26 for “Recording from External
Components”)
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio stream
is selected.
Notes:
•
•
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a
Digital Multi-channel decoder.
To see the audio format of the current DVD in the on-
screen display, press AUDIO.
Rear of DVD+VCR
A1
A2
X
R
L
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings - VCR
By using the VCR Setup menu, you can make
various adjustments to items such as clock setting, and
timer recordings.
•
AUTO CLOCK SET
The Auto Clock Set feature is set to ON at the factory.
In the ON setting, the DVD+VCR looks for a channel
carrying XDS (Extended Data Services) information.
XDS updates the clock using the Coordinated
Universal Time.
Your DVD+VCR allows remote control adjustment of
several features.
- Use b/B to choose ON or OFF.
• DAYLIGHT SAVINGS
General Operation
You can turn Daylight Savings On or Off manually. If
you choose “AUTO”, the DVD+VCR sets the clock
using the DST information broadcast in the signal
(channel).
1. Press VCR on the remote control.
2. Press VCR MENU and the MAIN menu will appear.
- Use b/B to choose AUTO, ON or OFF.
• TIME ZONE
You can set your local Time Zone manually. If you
choose “AUTO”, the DVD+VCR sets the clock using
the first Coordinated Universal Time information it
finds in a broadcast signal.
-Use b/B to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIF-
IC, ALASKA or HAWAII).
Notes:
3. Use v/V to select the desired menu, then press
ENTER.
•
The Auto Clock feature enables the DVD+VCR to set up the
clock while the DVD+VCR is turned off.
4. Use v/V to choose a desired option on the selected
Menu. Then use b/B to choose a desired setting.
•
There are cases where the TV station does not send or
sends wrong date and/or time information and the
DVD+VCR sets the incorrect time. If this happens we rec-
ommend that you set the clock manually.
5. Press VCR MENU when finished.
Note:
Menus remain on-screen for 3 minutes.
Manual Clock Set
Use v/V/b/B to enter the necessary information.
•
•
MONTH : Choose the month.
DAY : Choose the date.
CLOCK
The day of the week will display automatically.
• YEAR : Choose the year.
• TIME : Choose the time.
The DVD+VCR gives you two ways to set the time and
date: the Auto Clock feature or Manually.
Press and hold b/B to advance clock continuously.
Auto Clock Set
Notes:
•
If setting the clock manually, “AUTO CLOCK SET” must set
to “OFF”. If it is set to “ON”, an incorrect date and/or time
will be entered again when the DVD+VCR is turned off.
•
The clock uses the 12-hour system. Be sure to set AM and
PM correctly (AM does not appear).
PROGRAM
The Timer Recording function allows you to record up to
8 programs within a period of one year. (See pages 24-
25).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings - VCR (Continued)
TUNING
SETUP
This DVD+VCR is equipped with a frequency synthe-
sized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels 14-69
and CATV channels 1-125.
Auto Channel Programming
FUNCTION OSD
The on-screen display can be turned on or off.
AUDIO MODE
The DVD+VCR has two separate audio playback sys-
tems, the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system plays
on separate (left and right) channels, and the NORMAL
system plays monaural sound. The normal track is
always played so the cassette can be played on a
DVD+VCR that does not have VHS Hi-Fi.
1. Choose the SOURCE SELECT option, then use b/B
to select TUNER.
Use b/B to switch among TUNER, LINE1, and LINE2.
2. Choose the AUTO CHANNEL SET option, then use
b/B to find channels.
• The tuner will automatically cycle through all available
channels (TV/CATV) in the area and place them in the
tuner’s memory.
BROADCAST TYPE (STEREO / SAP / MONO)
Multichannel Television Sound (MTS) carries stereo
and/or Second Audio Program (SAP) bilingual signals.
Set this display to the desired position when both MTS
stereo and SAP signals are received. When only one of
the MTS signal is received, the DVD+VCR automatically
selects the corresponding receiving mode (Stereo or
SAP) regardless of the selected position. For normal
operation, the display should be in the STEREO posi-
tion. The DVD+VCR will then record a STEREO pro-
gram when available, and record a mono program IF
the program is NOT IN STEREO. For weak STEREO
and/or SAP broadcasts, changing the display to mono
may give clearer sound.
• After the AUTO CHANNEL SET is complete, the
TUNING menu will hide and return to the TV screen
automatically.
3. Make sure the TUNING BAND is set appropriately
(TV or CATV).
• TV : If you are using a standard antenna to receive
channels.
• CATV : If you are using basic cable to receive channels.
To Add or Erase Channels
This feature allows you to add or erase channels from
memory manually.
AUDIO OUTPUT (STEREO / LEFT / RIGHT)
1. Choose the CH. ADD/DEL option, then use b/B to
select a channel to add or erase.
Used during playback [when AUDIO MODE (HI-FI/NOR-
MAL) is in HI-FI position] for selecting the audio output
signals from the AUDIO OUT terminals (L ch and R ch),
and RF.OUT. This display setting should normally be left
in the stereo position, so that when a stereo tape is
played, the stereo sound will be heard through the left
and right channels. If a mono tape is played and the
audio output is set to stereo, the same mono sound will
be heard from both left and right channels.
2. Use ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase other
channels.
3. Press VCR MENU to return to the TV screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings - DVD
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu item, see pages 17 to 20.
LANGUAGE
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
Menu Language
Select a language for the VCR and DVD’s setup menu
and information display.
General Operation
1. Press DVD on the remote control.
Disc Audio / Subtitle / Menu DVD
2. Press SETUP.
The Setup menu appears.
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
3. Use v / V to select the desired option then press B
to move to the second level. The screen shows the
current setting for the selected item, as well as alter-
nate setting(s).
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number but-
tons then ENTER to enter the corresponding 4-digit
number according to the language code list in the refer-
ence chapter (see page 37). If you enter the wrong lan-
guage code, press CLEAR.
4. Use v / V to select the second desired option then
press B to move to the third level.
5. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
Off (for Disc Subtitle) : Turn off Subtitle.
6. Press SETUP or PLAY (N) to exit the Setup menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings - DVD (Continued)
4. When the confirm menu appears on your screen
“Cancel” is highlighted as default. Use the b
button to highlight “Enter”.
DISPLAY
5. Pressing ENTER will set this unit to progressive scan
mode.
TV Aspect DVD
Notes:
•
4:3 :
Select when a standard 4:3 TV is connected.
If you set Progressive Scan to ON in error, you must reset
the DVD+VCR. Press STOP (x) and hold it for more then
five seconds before releasing it. The video output will be
restored to the standard setting, and a picture will once
again be visible on a conventional analog TV or monitor.
16:9 : Select when a 16:9 wide TV is connected.
Display Mode DVD
•
Do not turn off this DVD+VCR while the “PROGRESSIVE
SCAN MODE” message is displayed on the TV screen.
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Video Output
Set this unit’s Video Output options according to the TV
connection type.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
Progressive Scan DVD
Progressive Scan setting works only when the Video
Output mode is set to “YPbPr”.
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connec-
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to On.
S-VIDEO : When your TV is connected with the
S-VIDEO OUT jack on this unit.
YPbPr : When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on this unit.
To turn on progressive scan:
Connect component/progressive out of this unit to the
input of your monitor/television, set your television or
monitor to component/progressive Input.
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
2. Select “On” using the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings - DVD (Continued)
AUDIO
OTHERS
Each DVD disc has a variety of audio output options.
Set this unit’s AUDIO options according to the type of
audio system you use.
The PBC, Auto Play, and B.L.E. settings can be
changed.
VCD
PBC
Dolby Digital / DTS / MPEG DVD
Set Playback Control (PBC) to On or Off.
Bitstream: Select “Bitstream” if you connect the
DVD+VCR’s DIGITAL AUDIO OUT jack to an ampli-
fier or other equipment with a Dolby Digital, DTS or
MPEG decoder.
On: Video CDs with PBC are played according to the
PBC.
Off: Video CDs with PBC are played the same way as
Audio CDs.
PCM (for Dolby Digital / MPEG): Select when con-
nected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
Auto Play DVD
You can set up the DVD+VCR so a DVD disc automati-
cally starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
Off (for DTS): If you select “Off”, the DTS signal is
not output through the DIGITAL AUDIO OUT jack.
Sample Freq. (Frequency) DVD
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit automatically converts any 96 kHz sig-
nals to 48 kHz so your system can decode them.
On: Auto Play function is active.
Off: Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without any
further processing.
B.L.E. (Black Level Expansion)
Check the documentation for your amplifier to verify its
capabilities.
To select the black level of playback pictures. Set your
preference and monitor’s ability.
DRC (Dynamic Range Control) DVD
On: Expanded grey scale. (0 IRE cut off)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). This allows you to listen to a
movie at a lower volume without losing clarity of sound.
Set DRC to On for this effect.
Off: Standard grey scale. (7.5 IRE cut off)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings - DVD (Continued)
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
1. Select “Password” on the LOCK menu then press B.
2. Follow step 2 as shown left column (Rating).
To change the password, select the “Change”, press
ENTER and input the new 4-digit code then press
ENTER. Input it again to verify.
3. Press SETUP to exit the menu.
Rating DVD
If you forget your Security Code
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the complete
disc or to certain scenes on the disc. Movies and
scenes are rated from 1 to 8, depending on the area.
DVD video discs may or may not respond to the
parental control setting if the Area code of the disc is
set wrongly. Some discs offer more suitable scenes as
an alternative. Ratings are area dependent.
If you forget your security code you can clear it
using the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499”
and the security code is cleared.
3. Enter a new code as described above.
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you
believe is unsuitable.
Area Code DVD
Enter the Area Code whose standards were used to
rate the DVD video disc, based on the list in the
reference chapter (see page 37).
1. Select “Rating” on the LOCK menu then press B.
1. Select “Area Code” on the LOCK menu then press
B.
2. To access the Rating, Password and Area Code fea-
tures, you must input the 4-digit security code you
created.
2. Follow step 2 as shown left (Rating).
If you have not yet entered a security code you are
prompted to do so. Input a 4-digit code and press
ENTER. Enter it again and press ENTER to verify. If
you make a mistake before pressing ENTER, press
CLEAR.
3. Select the first character using v / V buttons.
4. Press B and select the second character using
v / V buttons.
5. Press ENTER to confirm your area code
selection.
3. Select a rating from 1 to 8 using the v / V buttons.
1-8: Rating one (1) has the most restrictions and rat-
ing eight (8) has the least restrictive.
Unlock : If you select unlock, parental control is not
active and the disc plays in full.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
5. Press OPEN/CLOSE ( ) to activate parental
control.
Note:
If you set a rating for the player, all disc scenes with the same
rating or lower are played. Higher rated scenes are not played
unless an alternate scene is available on the disc. The alterna-
tive must have the same rating or a lower one. If no suitable
alternative is found, playback stops. You must enter the 4-digit
password or change the rating level in order to play the disc.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
This chapter describes how to operate the VCR and
DVD.
Manual Tracking
To manually adjust the tracking use the
CH/TRK (v/V) buttons on the remote control or
CH (v/V) on the front panel during playback.
VCR Tape Playback
Press the VCR button to select the device to be operat-
ed.
Notes:
•
Vertical jitter requires a very fine adjustment.
•
Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
Basic Instructions
1. Turn on the TV.
2. Tune the TV to the DVD+VCR output channel (CH 3
or 4) or if a direct VIDEO/AUDIO connection is
made between the DVD+VCR and the TV, set the
TV’s source selector to VIDEO.
Search
This function lets you visually search for a tape section
in either direction: forward and reverse. During the high-
speed picture search modes, the audio is muted and
horizontal lines (noise bars) appear. Also, a short time is
needed to stabilize the tape speed when re-entering the
PLAY mode so slight interference may be observed dur-
ing this time.
3. Insert a pre-recorded video cassette.
The indicator lights and the DVD+VCR pow-
ers on automatically.
4. If the
(TIMER) indicator in the display window is
lit press POWER (I/1) once.
To search:
5. If a tape without a safety tab is inserted the unit
starts playback automatically.
If not, press PLAY (N).
1. Press REW (m) or FWD (M) during playback.
2. To return to playback, press PLAY (N).
6. Press STOP (x) to stop playback. If the tape reach-
es the end before you press STOP (x) the
DVD+VCR automatically stops, rewinds and ejects
the tape.
Still Picture and Frame-by-Frame Playback
Note:
1. Press PAUSE/STEP (X/C) during playback.
A still picture appears on the TV screen and the
audio is muted.
It is not necessary to select the tape speed for playback
because it is automatically selected by the DVD+VCR. Also,
during playback the TV/VCR selector switches to VCR mode
automatically.
2
If the still picture vibrates vertically, stabilize it by
using CH/TRK (v/V) on the remote control.
3. Press PAUSE/STEP (X/C) repeatedly to advance
the video picture one frame at a time.
Auto Tracking
Automatic tracking adjusts the picture to remove snow
or streaks and beings when:
4. To return to playback, press PLAY (N).
Note:
After 5 minutes in STILL mode the DVD+VCR stops to
protect the tape and video heads.
•
•
•
•
When the ATR (Auto Tracking) button is pressed.
A tape is played for the first time.
The tape speed (SP, LP, SLP) changes.
Streaks or snow appear due to scratches on the
tape.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Slow Motion
VISS (VHS Index Search System)
The VHS INDEX SEARCH SYSTEM enables you to
locate the beginning of any recording made on this
DVD+VCR. Whenever a recording begins, an invisible
INDEX mark is recorded on the tape.
1. While in playback or still mode, press SLOW (y).
The tape is played at a speed 1/19 times slower
than the normal speed.
2. Use CH/TRK (v/V) on the Remote Control if
necessary to adjust the tracking.
VISS Scan
VISS SCAN lets you search out each VISS mark on the
recorded tape and play 5 seconds before advancing to
the next VISS mark.
3. To return to the normal speed, press PLAY (N).
Notes:
•
During slow motion, audio is muted and horizontal lines
(noise bars) may appear on the TV screen. This is normal.
After 3 minutes in SLOW MOTION mode the DVD+VCR
goes back to PLAY mode to protect the tape and video
heads.
1. Insert a cassette tape that has VISS signals marked.
•
2. Press the VISS once during PLAYBACK or STOP
mode. The “SCH --” indicator will appear in the dis-
play window.
3. Press either REW (m) or FWD (M).
The VISS SCAN will start. The tape will be rewound
or rapidly advanced to the next signal marked. The
tape will be played back for approximately 5 sec-
onds, and then rewound or rapidly advanced to the
next VISS signal.
CM SKIP (Commercial Skip)
This feature is useful for skipping commercials or short
program segments.
1. Press CM SKIP in playback mode. The DVD+VCR
performs a fast forward picture search through 30
seconds of recording.
Press VISS or STOP button to stop the VISS SCAN
mode.
4. At the desired program, press the PLAY (N).
Normal playback of that program will begin.
2. Press CM SKIP again to extend the search time by
an addition 30 seconds. The maximum search time
is 3 minutes.
VISS Search
You can locate the desired program and play it back
automatically by designating the number of its VISS sig-
nal. Up to the 99th VISS signal from the preset position
on the tape can be located.
3. When the search is complete, the DVD+VCR goes
into playback mode automatically.
Blank Search
1. Press the VISS button once during PLAYBACK or
STOP mode.
The Blank Search enables you to locate the end of any
recording. Whenever a recording creates, a blank con-
tent is recorded on the tape. Press BLANK SEARCH
during playback or in the stop mode and rapidly
advanced to find blank content. To find next blank con-
tent, press BLANK SEARCH again.
The “SCH --” indicator will appear in the display win-
dow.
2. Enter the number of VISS signals you wish to skip.
Up to 99 signals may be skipped from any given
position on the tape.
3. Press either REW (m) or FWD (M) once.
The SCH 02 (for example) message appears in the
display window. When the desired VISS signal is
found, playback begins automatically.
If the end of the tape is reached during forward
VISS search, the DVD+VCR will automatically stop,
rewind, eject, and turn itself off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
MTS (Multi-Channel TV Sound)
VHS Hi-Fi Stereo / MTS
Broadcast
This DVD+VCR can decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies
as long as they operate on assigned cable frequencies
and use the EIA-recommended MTS stereo/bilingual TV
sound system.
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The informa-
tion below gives a brief description of Hi-Fi audio and
how to record and play a tape in the Hi-Fi audio mode.
Hi-Fi Stereo Audio Sound
Multichannel TV Sound Indicator (MTS)
When you press ENTER one or both of the indicators
appears on the TV Screen.
A stereo TV with AUDIO/VIDEO input jacks or a stereo
audio system is required for true stereo playback. To
experience the full and rich stereo sound available with
Hi-Fi recorded tapes, we recommend the connection of
this unit to a home stereo audio system.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE option
is in the STEREO position. The DVD+VCR can also
record mono audio onto the mono audio track.
1. Set the AUDIO MODE option to HI-FI on the SETUP
menu .
SAP
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).
2. Set the AUDIO OUTPUT option to STEREO so that
the left channel sound (L) is heard from the left
speaker and the right channel sound (R) is heard
from the right speaker.
The other options are (LEFT) POSITION, which
results in the left channel sound (L) being heard
from both speakers or (RIGHT) POSITION, which
results in the right channel sound (R) being heard
from both speakers.
3. Insert a cassette and press PLAY (N).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
VCR Tape Recording
To record one TV program while watching
another
Basic Instructions
1. Press TV/VCR to select the TV mode during record-
ing. The TV indicator appears.
1. Turn on the DVD+VCR and TV.
2. Using the TV, select the channel to be viewed.
2. Tune the TV to the DVD+VCR output channel (CH 3
or 4) or if a direct VIDEO/AUDIO connection is
made between the DVD+VCR and the TV, set the
TV’s source selector to VIDEO.
Timer Recording
For unattended recording, you must input the
channels to be recorded and the starting and ending
times.
3. Insert a video cassette with the safety tab intact.
4. Select the desired channel using CH/TRK (v/V).
5. If you are recording from another source via
audio/video input jacks (at the rear or front panel),
select LINE1 or LINE2 using INPUT SELECT.
Things to know before starting
If you try to set the program timer before setting
the clock, “PLEASE SET THE CLOCK” appears
for a moment and then CLOCK menu appears on
the TV screen. Set the time and date before pro-
ceeding.
6. Set the desired recording speed (SP or SLP) by
pressing SP/SLP. This DVD+VCR is not designed to
record in LP mode.
7. Set the MTS mode (STEREO or SAP). Set the
BROADCAST TYPE option to SAP if applicable.
1. Turn on the DVD+VCR and the TV.
8. Press REC/OTR and recording starts. The REC indi-
cator appears in the display window. If a cassette
with no safety tab is loaded, the cassette is ejected.
2. Be sure the TV is set to the DVD+VCR output chan-
nel (3 or 4).
3. Make sure the TUNING BAND in the TUNING menu
is set appropriately (TV or CATV).
9. Press STOP (x) to stop recording. If the tape reach-
es the end before STOP (x) is pressed, the
DVD+VCR stops, rewinds and ejects the tape.
4. Press VCR MENU and the MAIN menu appears.
Tip:
5. Use v/V to choose the PROGRAM menu and press
ENTER.
Use PAUSE/STEP (X/C) for best results when making
changes while recording. For example, if you want to change
channels while recording, first press PAUSE/STEP (X/C) to
put the unit in pause mode, select the desired channel on the
DVD+VCR, and then press PAUSE/STEP (X/C) again to
resume recording.
Notes:
•
During the VCR recording mode, you cannot change to the
DVD mode.
If eight programs are already entered, the FULLY
PROGRAMMED message appears for a moment
and then PROGRAM 1 appears on the TV screen.
•
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materi-
als, is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and/or criminal liability.
6. Use the v/V buttons to switch between the program
options, and the b/B buttons to input the program
information:
Input the month, day, start and stop times of the
program you want to record.
To pause the recording
1. Press PAUSE/STEP (X/C) to pause the tape dur-
ing recording. The REC indicator flashes in the dis-
play window.
2. When you want to continue recording, press
PAUSE/STEP (X/C) or press REC/OTR. After 5
minutes in PAUSE mode, the DVD+VCR stops auto-
matically to protect the tape and the video heads.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
CHANNEL: Select a TV channel, LINE1 or LINE2. If
you have CABLE TV and use a cable box (convert-
er) you must set the channel to match the cable box
output channel (usually CH 3 or 4). Change chan-
nels on the cable box instead of with the DVD+VCR.
If you use a cable converter, you can program multi-
ple recordings only on the converter box output
channel. This is because the converter determines
what channel you view through your DVD+VCR.
Checking or Erasing the Timer Program
Programming can be checked whenever the DVD+VCR
is turned on.
1. Press VCR MENU and the MAIN menu appears.
2. Use v/V to choose the PROGRAM menu and press
ENTER.
SPEED: AUTO mode determines how much tape is
left and switches the speed from SP to SLP if it is
necessary to complete recording the program. If this
occurs there could be some picture and sound dis-
tortion at the point where the speed changes.
REPEAT: To record up to 8 programs on a certain
day of every week select WEEKLY. To record up to
8 programs at the same time Monday through Friday
select DAILY. Otherwise select ONCE.
3. Use b/B to select a program you want to check or
erase. To erase the program, press CLEAR.
4. Press VCR MENU to return to the TV screen.
7. Press VCR MENU and the program is memorized
by the DVD+VCR.
Program Priority
8. Additional programs may be entered by repeating
steps 1-7.
9. Ensure you insert a tape with the record safety tab
intact before the first programmed time.
If the recording start and end times of preset programs
overlap on the same day (see the example), the second
program is not recorded until the first is finished.
10. Press STOP (x) to end timer recording.
Notes:
•
If you make a mistake or want to change a setting, use v
to select the option and correct it using b/B.
•
If the program preset time is past, the “PAST TIME
PROGRAMMED” message appears on the TV screen.
Return to the incorrect program and program it with the
correct time.
In this example, the first part of program numbers 2 and
3 are not recorded.
•
•
If you enter a past date, the timer recording will be
performed on that date of the next year.
If the power fails or the DVD+VCR is unplugged the clock
and timer settings are kept in memory for only 3 seconds.
Otherwise you must reset the clock and timer.
•
•
If the tape indicator is blinking, no tape is loaded.
When you are playing DVD at programmed Recording
time, the DVD+VCR automatically change to VCR mode
and start recording.
•
•
The DVD+VCR will automatically power off when Timer
Recording ends.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materi-
als, is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and/or criminal liability.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Checking the Recording Time
One-touch Timer Recording
With this feature you can record for a preset length
without using the program timer.
Press REC/OTR once to check the recording time. The
recalled setting automatically returns to the TV screen
after 6 seconds.
1. Turn on DVD+VCR and the TV.
2. Be sure the TV is tuned to the DVD+VCR output
channel (CH 3 or 4). If a direct VIDEO/AUDIO con-
nection is made between the DVD+VCR and the TV,
set the TV’s source selector to VIDEO.
Extending the Recording Time
The recording time can be extended anytime by press-
ing REC/OTR. Subsequent presses result in advancing
the recording time by 30-minute increments.
3. Insert a video cassette with the safety tab intact.
4. Select the desired channel using CH/TRK (v/V) or
the number buttons (0-9). The channel number
appears on the TV screen. If you are recording from
another source via audio/video input jacks, select
LINE1 (rear jacks) or LINE2 (front jacks) by using
INPUT SELECT.
Note:
If you press PAUSE/STEP (X/C) during instant timer record-
ing, the instant timer recording is cancelled.
Recording from External Components
5. Set the desired recording speed (SP or SLP) using
SP/SLP. The tape speed appears on the TV screen.
You can record from an external component, such as a
camcorder or VCR, connected to any of the
DVD+VCR’s external inputs.
6. Press REC/OTR twice. The menu appears on the
TV screen, recording starts, and the
indicator lights.
(TIMER)
1. Make sure that the component you want to record
from is connected properly to the DVD+VCR. See
page 14.
ONE TOUCH TIMER RECORD
CHANNEL
SPEED
7
SP
2. Press INPUT SELECT repeatedly to select the
external input to record from.
START
LENGTH
NOW
0H30M
•
LINE1 (L1): Audio/Video Input mounted on back
panel.
•
LINE2 (L2): Audio/Video Input mounted on front
panel.
7. Press REC/OTR repeatedly to select the recording
time length. Each time you press this button the
recording time increases 30 minutes (up to 9 hours).
At the end of the recording, the DVD+VCR will stop
recording and shut off.
3. Load a recordable tape.
4. Set a recording mode (SP or SLP) as necessary by
pressing SP/SLP repeatedly.
If you set the time to 0H00M, the DVD+VCR goes
into the normal recording mode. Press STOP (x) to
stop the recording.
5. Play the tape or disc in the external component. If
you have a TV attached to your DVD+VCR, you
can see the video playing.
6. Press REC/OTR once to start recording.
The REC indicator lights in the display window.
Note:
•
•
•
During One-touch Timer Recording, you cannot change the
channel on the DVD+VCR.
7. Press STOP (x) to stop recording.
During the VCR recording mode, you cannot change to the
DVD mode.
Notes:
•
Before recording, confirm the recording start position.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materi-
als, is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and/or criminal liability.
•
If your source is copy-protected using CopyGuard, you will
not be able to record it using this unit. See Copyright on
page 7 for more details.
•
To record for a fixed length of time, see One-touch Timer
Recording.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Each press of the ENTER changes the TV screen in the
following sequence.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
STOP
SP
CH
4
STEREO
1. Insert the disc you wish to copy into the DVD deck
and close the disc tray.
APR 30 , SAT
2:15 PM
2. Insert a blank VHS video tape into the VCR deck.
2:15 PM
3. Find the place on the DVD from which you want to
start dubbing using the PLAY, FWD, REW and
PAUSE functions.
0:35:40
REM 1:58
For best results, pause playback at the point from
which you want to record.
Real-Time Counter
4. Press the COPY button on the front panel or
REC/OTR on the Remote Control. The DVD goes
into PLAY mode and the VCR goes into RECORD
mode. If the DVD disc menu appears, you may need
to press PLAY (N) manually to begin copying.
If a tape with contents recorded on it is inserted into the
DVD+VCR, the real-time counter shows length of the tape
running in hours, minutes, and seconds.
Press CLOCK/COUNTER to select the real-time counter dis-
play. Every press of CLOCK/COUNTER changes the TV
screen as illustrated below.
5. When the DVD is finished playing, press STOP (x)
to end copying.
Notes:
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
•
•
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs (or Discs). “LOCK” is dis-
played in the display window.
REMAINING TIME
Counter Memory
This feature is useful if there is a section of tape you want
to view immediately after recording or if you want to return
to the same point several times.
You must stop the copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
1. Begin recording or playing a tape.
•
•
When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.
2. Press CLOCK/COUNTER until the real-time counter is
displayed on the TV screen.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materi-
als, is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and/or criminal liability.
3. At the point that you want to locate later, reset the real-
time counter to “0:00:00” by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (x) when recording or playback finishes.
On-Screen Display - VCR
6. Press REW (m). The tape automatically stops when
the tape counter returns to about “0:00:00”.
Some of these functions will be displayed every time
the DVD+VCR is operated.
Tape Remaining
This function displays the amount of time remaining on the
tape during recording or playback. Press
❶
❷
❸
❹
❺
CLOCK/COUNTER repeatedly until the REM indicator
displays on the TV screen during recording or playback.
The remaining tape length may not be displayed correctly
depending on the condition of the tape and the kind of the
tape (T-140, T-160, or T-210 etc.).
PLAY
SP
HI-FI
CH 4
STEREO
Notes:
OCT 8 , SAT
2:15 PM
•
•
•
The function displays can be seen displayed on the TV
screen for 5 seconds.
❻
❼
The clock (or tape counter, tape remaining) mode will be
displayed until you press ENTER.
❶ TAPE SPEED DISPLAY
❷ FUNCTION DISPLAY
❸ HI-FI DISPLAY
❺ STEREO/SAP DISPLAY
(MONO is not displayed)
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remain-
ing tape length indicator appears after any tape operation.
❻ DATE DISPLAY
❼ CLOCK/COUNT/REMAIN
DISPLAY
❹ CHANNEL DISPLAY
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Additional VCR Information
S-VHS Quasi Playback (SQPB)
•
This DVD+VCR can play back S-VHS recorded
tapes, however, it cannot make recordings using S-
VHS format tapes.
•
During manual recording, timer recording,
One-touch Timer Recording, playback, or fast forward
modes, the DVD+VCR automatically starts rewinding
the tape at the end of the tape. The cassette stops at
the beginning of the tape and is ejected.
•
SQPB is an abbreviation for S-VHS Quasi Playback.
Easy Information
•
After you have finished using the DVD+VCR,
rewind, eject, and remove the cassette. Place the
cassette in its protective sleeve to protect it from
dust. It is not necessary to rewind the cassette
before removing it, but if you do, it is ready to play
or record the next time you use it.
If the Extended Data Service (XDS) signals are provid-
ed along with normal TV signal in your area or during
playback of a tape recorded with Extended Data
Service (XDS) signals, the station ID, program title, and
program details are shown on the TV screen. When
viewing a channel with Extended Data Service (XDS) sig-
nals, press ENTER and the station ID will appear on the TV
screen. Press ENTER again and the program details will
appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
•
•
Be sure the DVD+VCR channel selector is on the
correct channel you wish to record. The channel that
is being recorded can always be checked by setting
the television on the DVD+VCR channel (CH 3 or 4)
and pressing the TV/VCR to turn the DVD+VCR’s
TV indicator off.
Do not attempt to hook up more than one television
set to the DVD+VCR for either recording or play-
back.
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program (N/A,
G, PG, PG-13, R, NC-17, X and Not Rated). The rating
N/A means that the motion picture ratings are not applica-
ble to this program.
VCR Auto Play System
This DVD+VCR features automatic playback.
CH
4
SP
WABC
STEREO
When you load a tape with the safety tab removed the
following occurs:
•
The Output Source is changed to VCR mode
automatically.
“Home video”
APR 30 , SAT
2:15 PM
•
•
•
The power turns on automatically and playback begins.
At the end of the tape, the DVD+VCR stops, then rewinds.
Easy Information Screen
(Station ID)
The tape is ejected after rewinding and the turns itself off
automatically.
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
Note:
Auto power off does not function during regular DVD play
mode. (DVD+VCR power stays on.)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
Playback Setup
General Features
1. Turn on the TV and select the video input source
connected to the DVD+VCR.
Notes:
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD+VCR.
3. Press OPEN/CLOSE ( ) to open the disc tray and
load your chosen disc in the tray, with the playback
side down.
DVD
Moving to another TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY and select desired title by
using number (0-9) or b / B then press ENTER to move
to another title.
4. Press OPEN/CLOSE ( ) to close the tray.
Playback starts automatically. If playback does not
start, press PLAY (N).
In some cases, the disc menu might appear instead.
Moving to another CHAPTER / TRACK
5. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
DVD
VCD
the disc. “Xx” appears on the screen briefly. Press
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
PLAY (N) to resume playback (from the scene
point). If you press STOP (x) again or unload the
disc (“x” appears on the screen.), the unit will clear
the stopped point.
•
Press SKIP (> or .) briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
Press OPEN/CLOSE ( ) to remove the disc.
Press OPEN/CLOSE ( ) to close disc tray or press
POWER (I/1), the disc tray closes automatically
and unit turns off.
•
•
Press SKIP (.) twice in quick successions to
step back to the previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the chap-
ter/track icon. Input the chapter/track number (0-9)
or use b / B, then press ENTER.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
Note:
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See “PBC” on page 19).
DVD
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start. Press
TOP MENU or MENU to return to the menu screen.
DVD
VCD
Slow Motion
VCD
1. Press SLOW (y) during playback or still mode.
The DVD+VCR will now go into SLOW mode.
Use the number buttons to select the track you want
to view and press RETURN (O) to return to the
menu screen. Menu settings and operating proce-
dures may differ. Follow the instructions on each
menu screen. You also may set PBC to Off (See
“PBC” on page 19).
2. Use SLOW (y) to select the required speed:
T 1/7, T 1/6, T 1/4, or T 1/2 (forward).
3. To exit Slow Motion mode, press PLAY (N).
Notes:
Note:
Slow motion playback in reverse is not possible.
•
If parental control is set and the disc is not within the rating
settings you must input the password.
(See “LOCK” on page 20).
•
DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 1 (one)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
Still Picture and Frame-by-Frame Playback
Repeat
DVD
VCD
DVD
VCD
You can repeat a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
1. Press PAUSE/STEP (X/C) during playback.
Advance the picture frame-by-frame by pressing
PAUSE/STEP (X/C) repeatedly.
DVD Video Discs - Repeat Chapter / Title / Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
2. To exit still motion mode, press PLAY (N).
• Off : does not play repeatedly.
Search DVD
VCD
Video CDs - Repeat Track / All / Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
1. Press REW (m) or FWD (M) during playback.
2. Press REW (m) or FWD (M) repeatedly to select
the required speed :
DVD disc; X2, X4, X16 or X100
Video CD; X2, X4, X8
Notes:
•
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See “PBC” on page 19).
3. To exit SEARCH mode, press PLAY (N).
•
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
Time Search DVD
VCD
To start playing at any chosen time on the disc:
Repeat A-B DVD
VCD
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
To repeat a sequence.
2. Press v / V to select the time clock icon and
“ -:--:-- ” appears.
1. Press A-B RPT at your chosen starting point. “A - ”
appears briefly on the TV screen.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers you
entered. Then input the correct numbers.
2. Press A-B RPT again at your chosen end point.
“A - B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press A-B RPT again to cancel.
4. Press ENTER to confirm. Playback starts from the
selected time.
Zoom DVD
VCD
Note:
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See “PBC” on page 19).
Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
Marker Search DVD
To enter a Marker
VCD
2. Each press of the ZOOM button changes the TV
screen in the sequence:
100% size → 150% size → 200% size → 300% size
→ 400% size → 100% size.
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine mark-
ers.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press ZOOM repeatedly
or CLEAR button.
To Recall or Clear a Marked Scene
Note:
Zoom may not work on some DVDs.
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
Changing the Audio Channel VCD
Special DVD Features
Press AUDIO repeatedly during playback to hear a
different audio channel (Stereo, Left, Right).
Checking the contents of DVD discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Input the
corresponding number or use the b B v V buttons to
highlight your selection. Then press ENTER.
Last Scene Memory DVD
CD
VCD
This player memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the player or switch off the
player. If you load a disc that has the scene memorized,
the scene is automatically recalled.
DVD
Title Menu
1. Press TOP MENU. If the current title has a menu,
the menu appears on the screen. Otherwise, the
disc menu may appear.
Note:
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and chapters
for the title.
3. Press TOP MENU to exit.
Instant Replay DVD
Disc Menu DVD
Press INSTANT REPLAY during playback and the disc
will reverse picture search through 10 seconds of play-
back. And then the playback will start from the point
again.
Press MENU and the disc menu is displayed.
Press MENU again to exit.
Camera Angle DVD
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle dur-
ing playback. Press ANGLE repeatedly during playback
to select a desired angle. Note that the number of the
current angle appears on the display.
Screen Saver
The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
Tip:
The Camera Angle icon is displayed on the TV screen when
alternate angles are available.
Changing the Audio Language DVD
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Subtitles DVD
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note:
If there is no information,
is displayed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
On-Screen Display - DVD
Maintenance and Service
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Refer to the information in this chapter before contact-
ing a service technician.
Handling the Unit
1. Press DISPLAY during playback.
2. Press v / V to select an item.
The selected item is highlighted.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum pro-
tection, re-pack the unit as it was originally packed at
the factory.
3. Press b / B to change the setting. You can also use
the number buttons if appropriate (e.g. inputting the
title number). For some functions, press ENTER to
execute the setting.
Keeping the exterior surfaces clean
Notes:
•
•
Some discs may not provide all of the features shown
below.
•
Do not use volatile liquids such as insecticide spray
near the unit.
If no button is pressed for 10 seconds, the on-screen dis-
play disappears.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
•
If
is displayed, action prohibited or not available.
Example: On-Screen Display during
playing DVD Video
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces
are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
Selection Method
Items
b
/
B
ENTER
, Numbers
Title Number
Do not use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the unit.
b
/
B
ENTER
, Numbers
Chapter Number
Time search
Numbers, ENTER
Maintaining the Unit
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Example: On-Screen Display during
playing VCD
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
Selection Method
Items
b
/
B, Numbers
Track Number
(or PBC mode)
ENTER
For details, please contact your nearest authorized
service center.
Numbers
ENTER
Time search
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA Disc
The DVD+VCR can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3), within
32 - 48kHz (WMA)
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY (N) or ENTER and playback starts.
• Bit rate: within 32 - 320kbps (MP3),
48 - 384kbps (WMA)
• The player cannot read an MP3/WMA file that has a
file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We rec-
ommend that you use Easy-CD Creator, which cre-
ates an ISO 9660 file system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of contens on the disc should be
less than 1500 files and 300 folders.
MP3 / WMA
1. Press v / V to select a folder, and press ENTER to
see the folder contents.
This DVD+VCR requires discs and recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatical-
ly set to these standards. There are many different
types of recordable disc formats (including CD-R con-
taining MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compat-
ible playback. Because this area of technology is still
evolving, Toshiba cannot guarantee that all recordable
discs will produce optimal playback quality. The tech-
nical criteria set forth in this owner’s manual are
meant only as a guide.
2. Press v / V to select a track then press PLAY (N)
or ENTER. Playback starts.
Please be advised that you must obtain permis-
sion from the applicable copyright owners to
download copyrighted content, including music
files, in any format, including the MP3 and WMA
formats, prior to the downloading thereof. Toshiba
has no right to grant and does not grant permis-
sion to download any copyrighted content.
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Song, Artist, Album, Comment, Genre ]
• If there is no information, “No ID3 TAG” appear on the
menu screen.
Microsoft, Windows Media, and the
Windows Logo are either registered
trademarks or trademarks of
Tips:
Microsoft Corporation in the United
States and/or other countries.
•
If you are in a file list on the “MUSIC” menu and want to
return to the Folder list, use the v / V to highlight
press ENTER.
and
•
•
To go directly to any track, input the track number (0-9).
On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TOP MENU and “MUSIC” or
“PHOTO” word on top of the menu is highlighted.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA Disc (Continued)
Random CD
MP3
WMA
Audio CD and MP3 / WMA Disc
Features
1. Press RANDOM during playback. Random Playback
begins immediately and “Random” appears on the
menu screen.
CD
MP3
WMA
Pause
2. To return to normal playback, press RANDOM
repeatedly until “Random” disappears from the
menu screen.
1. Press PAUSE/STEP (X/C) during playback.
2. To return to playback, press PLAY (N) or press
PAUSE/STEP (X/C) again.
Tip:
By pressing SKIP (> or .) during random playback, the
unit selects another track and resumes random playback.
Moving to another Track
CD
MP3
WMA
CD
Repeat A-B
1. Press SKIP (> or .) briefly during playback to
go to the next track or to return to the beginning of
the current track.
1. To repeat a sequence during disc playback press
A-B RPT at your chosen starting point. The Repeat
icon and “A -” appear on the menu screen.
2. Press SKIP (.) twice in quick successions to go
back to the previous track.
2. Press A-B RPT again at your chosen end point. The
Repeat icon and “A-B” appear on the menu screen,
and the sequence begins to play repeatedly.
3. You can play any track by inputting its number.
3. To exit the sequence and return to normal play,
press A-B RPT again. The Repeat icon disappears
from the menu screen.
CD
MP3
WMA
Repeat Track / All / Off
You can play a track/all on a disc.
1. Press REPEAT when playing a disc. The repeat icon
appears.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track.
• All: repeats all the tracks on a disc.
• Off (No display): does not play repeatedly.
Note:
If you press SKIP (>) once during Repeat Track playback,
the repeat playback will be cancelled.
CD
MP3
Search
1. Press REW (m) or FWD (M) during playback.
2. Press REW (m) or FWD (M) repeatedly to select
the required speed:
X2, X4 and X8 backward or forward.
3. To exit SEARCH mode, press PLAY (N).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA Disc (Continued)
Repeat Programmed Tracks
Programmed Playback
1. Press REPEAT when playing a disc. The repeat icon
appears.
The program function enables you to store your
favourite tracks from any disc in the player memory.
A program can contain 30 tracks.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
1. Insert a disc.
AUDIO CD or MUSIC menu appears.
2. Press PROGRAM.
E
Note:
If you press SKIP (>) once during Repeat Track playback,
the repeat playback will be cancelled.
The mark will appear to the right of the word
“Program” on the right side of the menu screen.
Erasing a Track from “Program” List
E
1. During STOP mode, press PROGRAM and
will appear.
mark
2. Use v / V / B to select the track that you wish to
erase from the Program list.
Audio CD Program Menu
3. Press CLEAR. Repeat to erase additional tracks on
the list.
Erasing the Complete Program List
E
1. During STOP mode, press PROGRAM and
will appear.
mark
2. Use B / v / V to select “Clear All” in the “Program”
list, then press ENTER.
MP3/WMA Program Menu
Note:
Note:
The programs are also cleared when the disc is removed.
E
Press PROGRAM again, the
the Program Edit mode.
mark will disappear to exit
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing in the
“Program” list.
5. Press PLAY (N) or ENTER to start. Playback
begins in the order in which you programmed the
tracks. Playback stops after all of the tracks on the
“Program” list have played once.
6. To resume normal playback from programmed play-
back, select a track of AUDIO CD (or MUSIC) list
and then press PLAY (N) or ENTER.
Note:
E
When you play the programmed track, the
pear then the program edit mode will disable.
mark will disap-
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a JPEG Disc
Using this DVD+VCR you can view discs with JPEG
files.
JPEG
Slide Show
Use v V b B to highlight the
press ENTER.
(Slide Show) then
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
JPEG
Still Picture
1. Press PAUSE/STEP (X/C) during slide show.
The player will now go into PAUSE mode.
2. To return to the slide show, press PLAY (N) or
press PAUSE/STEP (X/C) again.
JPEG
Moving to another File
Press SKIP (> or .) or cursor (b or B) once while
viewing a picture to advance to the next or previous file.
2. Press v / V to select a folder, and press ENTER. A
list of files in the folder appears. If you are in a file
list and want to return to the previous Folder list, use
JPEG
Zoom
Use zoom to enlarge the photo image. (see page 31)
the v / V buttons on the remote to highlight
press ENTER.
and
JPEG
To rotate picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY (N). The
selected file will appear for viewing.
While viewing a file, you can press STOP to move to
the previous menu (PHOTO menu).
JPEG disc compatibility with this player is
limited as follows:
Tips:
•
Information and user guidance regarding the current image
is displayed in the lower part of the screen. You can toggle
this bar on and off using RETURN (O).
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD+VCR to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 5760 (Horizontal) x
3840 (Vertical) pixels and burn another disc.
•
There are three Slide Speed options
>>> (Fast), >> (Normal) and > (Slow)
Use v V b B to highlight the Speed. Then, use b / B to
:
select the option you want to use then press ENTER.
•
On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TOP MENU and MUSIC or
PHOTO word on top of the menu is highlighted.
• The total number of contens on the disc should be
less than 1500 files and 300 folders.
• Some discs may be incompatible due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
• File names without “.jpg” extension will not be able
to be read by this DVD+VCR. Even though the files
are shown as JPEG image files in Windows
Explorer.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Language and Area Code List
Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Bengali; Bangla
Bhutani
Bihari
Hebrew
Hindi
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Area Code List
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
NL
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Kuwait
Libya
Luxembourg
PT
RO
El Salvador
LU
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall out-
let securely.
ꢀ DVD or VCR button is not switched
properly.
ꢀ Refer to page 7.
The power is on, but
the DVD+VCR does not
work.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
No picture.
ꢀ The TV is not set to receive DVD+VCR
signal output.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the DVD+VCR player appears on the
TV screen.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable into the jacks
securely.
ꢀ Mismatch setting between TV and this
unit.
ꢀ Select the correct Video Output in
SETUP menu.
ꢀ Wrong connection.
ꢀ Check the connection.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD+VCR signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cable into the jacks
securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The AUDIO options are set to the wrong
position.
ꢀ Set the AUDIO options to the correct
position.
The playback picture is
poor.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The TV channels are not tuned in properly.
ꢀ Tape heads are dirty.
ꢀ Check tuning, carry out tuning again.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Use CH/TRK (+/-) for manual tracking
adjustment while tape is playing.
ꢀ This unit can only output 525p
Progressive scan picture.
ꢀ Make sure that your TV can support
525p Progressive scan picture or set
Progressive scan to off.
ꢀ DVD+VCR was turned off while setting
the Progressive scan mode.
ꢀ Press and hold the STOP button for
more than 5 seconds.
The “PROGRESSIVE
SCAN MODE”
message remains to be
displayed.
ꢀ The Progressive Scan was set to “On”
in the SETUP menu but is connected to
a standard(analog) television with com-
ponent video input.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Cause
Correction
Symptom
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type and Regional code.)
The DVD+VCR does
not start playback.
ꢀ The disc is placed upside down.
ꢀ Place the disc with the playback side
down.
ꢀ The disc is not placed within the
guide.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
ꢀ Is the cassette compartment empty?
ꢀ Eject the tape in.
Video tape cannot be
inserted.
ꢀ Audio mode is not set properly.
No Hi-Fi sound
ꢀ Select STEREO by repeatedly pressing
AUDIO on the remote control.
ꢀ There is an obstacle in the path of the
remote control and this unit.
The remote control
does not work properly.
ꢀ Remove the obstacle.
ꢀ The batteries in the remote control are
exhausted.
ꢀ Replace the batteries with new ones.
ꢀ The remote control is not pointed at
the remote sensor of the DVD+VCR.
ꢀ Point the remote control at the remote
sensor of the DVD+VCR.
ꢀ The remote control is too far from the
DVD+VCR.
ꢀ Operate the remote control within 23ft
(7m).
ꢀ This remote control use the same but-
tons for VCR and DVD functions
(ex.PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
ꢀ Camcorder is off.
Camcorder image is
not shown.
ꢀ Turn camcorder on and operate
properly.
ꢀ DVD+VCR SOURCE SELECT is not
set to LINE1 or LINE2.
Camcorder image via
AV input to DVD+VCR
is not shown on TV
screen.
ꢀ Press INPUT SELECT to select LINE
input channel (LINE1 or LINE2).
ꢀ Clock in DVD+VCR is not set to
correct time.
Timer recording is not
possible.
ꢀ Set clock to correct time.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer.
ꢀ
indicator light does not appear after
programming timer.
ꢀ Reprogram Timer and turn DVD+VCR
off to enable timer.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
120V, 60 Hz
16 W
16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)
9.24 lbs (4.2 kg)
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
Power consumption
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
Signal system
NTSC
Inputs
ANTENNA IN
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
75 ohms (VHF/UHF/CATV)
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
S-VIDEO OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Adjustable)
VCR Specifications
Head system
Timer
Tape speed
Tape width
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
Maximum recording time
Rewind time
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20 Hz to 20 kHz
More than 43 dB
More than 88 dB
More than 60 dB
Channel separation
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz,
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT jacks only)
Less than 0.008%
More than 95 dB (DVD/CD)
Accessories:
Video cable x 1, Audio cable (L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty
Digital Audio Video ("DAV") Product - Exchange Warranty
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers
in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER
OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHAS-
ER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Warranty
Your Responsibility
TACP warrants this DAV Product and its parts against
defects in materials or workmanship for a period of
ninety (90) days after the date of original retail pur-
chase. DURING THIS PERIOD, TACP WILL
EXCHANGE A DEFECTIVE DAV PRODUCT WITH A
NEW OR REFURBISHED DAV PRODUCT WITHOUT
CHARGE TO YOU. DURING THE PERIOD THAT
COMMENCES ON THE DATE THAT IS NINETY ONE
(91) DAYS AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE AND ENDS ON THE DATE THAT IS
THREE HUNDRED SIXTY FIVE (365) DAYS AFTER
THE DATE OF ORIGINAL RETAIL PURCHASE, TACP
WILL EXCHANGE A DEFECTIVE DAV PRODUCT
WITH A NEW OR REFURBISHED DAV PRODUCT
FOR A FEE.
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this DAV Product must be
made pursuant to the TACP DAV Product Warranty
Exchange Program.
(3) The warranties from TACP are effective only if the
DAV Product is purchased and operated in the
Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls, and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inade-
quate antenna systems are your responsibility.
Rental Units
The warranty for DAV Product rental units begins on the
date of the first rental or thirty (30) days after the date of
shipment to the rental firm, whichever comes first.
Commercial Units
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to
any DAV Product or parts that have been lost or dis-
carded by you or to damage to the DAV Product or
parts caused by fires, misuse, accident, Acts of God
(such as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use
in violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this DAV
Product and connected equipment; or to units that
have been modified or had the serial number
DAV Products sold and used for commercial purposes
have a limited warranty for all parts and labor, which
warranty begins on the date of original retail purchase
and ends on the date that is ninety (90) days thereafter.
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating
this DAV Product.
Complete and mail the enclosed product registration
card or register your DAV Product on-line at
removed, altered, defaced, or rendered illegible.
registering your DAV Product you will enable TACP to
bring you new products specifically designed to meet
your needs and help us to contact you in the unlikely
event a safety notification is required under the U.S.
Consumer Product Safety Act. Failure to complete and
return the product registration card does not diminish
your warranty rights.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Obtain Warranty Services
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH MAY VARY FROM STATE TO
STATE IN THE U.S.A. SOME
If, after following all of the operating instructions in this
manual and checking the section
"Troubleshooting," you find that service is needed:
STATES OF THE U.S.A. DO NOT ALLOW LIMITA-
TIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR
(1) For instructions on how to obtain warranty service
for your DAV Product under the TACP DAV Product
Warranty Exchange Program, contact TACP's
Consumer Solutions Center toll free at
631-3811.
1-800-
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE
PROVISIONS MAY NOT APPLY TO YOU UNDER
SUCH CIRCUMSTANCES.
(2) You must include the original bill of sale (or a copy
of the original bill of sale) or other proof of purchase
along with the entire DAV Product when sending the
DAV Product to the TACP Warranty Exchange
Center specified by TACP's Consumer Solutions
Center. You are responsible for all inbound trans-
portation and insurance charges for the DAV
Product to the TACP Warranty Exchange Center.
For additional information, visit TACP's website:
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH
ABOVE. WITH THE EXCEPTION OF ANY WAR-
RANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A. AS HEREBY LIMITED, THE FOREGO-
ING WARRANTY IS EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, GUARANTEES,
AGREEMENTS, AND SIMILAR
OBLIGATIONS OF TACP WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS.
IN NO EVENT SHALL TACP BE LIABLE FOR CON-
SEQUENTIAL OR INCIDENTAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOST PROF-
ITS, BUSINESS INTERRUPTION, OR
MODIFICATION OR ERASURE OF RECORDED DATA
CAUSED BY USE, MISUSE OR INABILITY
TO USE THIS DAV PRODUCT).
No person, agent, distributor, dealer, or company is
authorized to change, modify, or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to
enforce any obligation of TACP arising under the war-
ranty or under any statute or law of the United
States or any state thereof is hereby limited to ninety
(90) days from the date you discover, or should have
discovered, the defect. This limitation does not apply to
implied warranties arising under state law.
Download from Www.Somanuals.com. All Manuals Search And Download.
ColorStream and ColorStream Pro
are registered trademarks of Toshiba
America Consumer Products, L.L.C.
P/NO: 3834RV0004T
Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|