Disc
Introduction
Connections
Basic Setup
Management
Recording
Playback
Editing
Function Setup
Others
TOSHIBA DVD VIDEO RECORDER
DR430KU
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
RISK OF ELECTRIC SHOCK
presence of uninsulated“dangerous voltage”within the
product’s enclosure that may be of sufficient magnitude
DO NOT OPEN
to constitute a risk of electric shock to persons.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The important note is located on the rear or bottom of
The symbol for CLASS ll (Double Insulation)
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Instructions
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and
serious damage to the apparatus.
Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal
injury and apparatus malfunction.
20. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the
smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
21. While it is thundering, do not touch the connecting cables or the apparatus.
22. Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.
23. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
E7PEAUD_DR430KU_EN.indd 2
2009/12/14 18:31:39
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
Location and Handling
Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
E7PEAUD_DR430KU_EN.indd 3
2009/12/14 18:31:43
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD recorder, please contact Toshiba Customer Service.
Supplied Accessories
For safety and optimum performance of this unit:
remote control with
AA (1.5 V) battery x 2
RCA audio/video cables
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
owner’s manual
quick setup guide
OWNER’S MANUAL
Avoid the Hazards of Electrical Shock and Fire
If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
About Copyright
return stop sheet
The unauthorized recording, use, distribution, or revision
of television programs, videotapes, DVDs and other
materials, is prohibited under the copyright laws of the
United States and other countries, and may subject you
to civil and/or criminal liability.
Note to CATV system installer
This reminder is provided to call the cable TV system
installer’s attention to Article 820-40 of the National
Electrical Code, which provides guidelines for proper
grounding - in particular, specifying that the cable
ground shall be connected to the grounding system of
the building, as close to the point of cable entry as
possible.
E7PEAUD_DR430KU_EN.indd 4
2009/12/14 18:31:43
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 93-96 before returning the product.
IR Signal Check
If the remote control does not work properly, you can test if
the remote control sends out the infrared signal with a
digital camera (including built-in camera of cellular phone). It
will help to define the cause of malfunction.
With a digital camera (including built-in camera of
cellular phone):
Direct a digital camera to remote control, press
light appears through digital camera, the remote
control is working.
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you.
Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near the
unit. Such chemicals may discolor the surface or
damage the unit.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the Disc Lens
• If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this owner’s manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Disc Handling
• Handle the discs so that fingerprints and dust do not
• Always store the disc in its protective case when it is
not used.
E7PEAUD_DR430KU_EN.indd 5
2009/12/14 18:31:45
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Recording
PRECAUTIONS
2
8
INFORMATION ON DVD RECORDING
33
33
33
34
34
34
35
35
Recording Mode
Restrictions on Recording
FEATURES
Symbols Used in this Owner’s Manual
FUNCTIONAL OVERVIEW
Installing the Batteries in the Remote Control
Using a Remote Control
8
SETTINGS FOR A RECORDING
Make Recording Compatible
Setting for Auto Chapter
Recording Audio Select (XP)
Setting Aspect Ratio for Video Mode Recording
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING
TIMER RECORDING
Hints for Timer Recording
12
12
14
14
15
17
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
On-Screen Display / Menu
Main Menu
36
38
41
42
43
43
44
FRONT PANEL DISPLAY GUIDE
Connections
CONNECTIONS
Connecting to an External Tuner
TV Connection Overview
Connecting to a TV with an HDMI
Compatible Port
Connecting to a TV with Component Video
Connecting to a TV with an S-Video Input Jack 20
SATELLITE LINK
18
18
18
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Recording from an External Device
Guide to DV and On-Screen Display
DVC to DVD Dubbing
19
45
46
Connecting to a TV with Audio / Video Input Jacks 21
Connecting to a TV without Audio
Video Input Jacks
Digital Audio Connection
21
22
Basic Setup
INITIAL SETTING
24
Clock Setting
25
SETTINGS FOR THE VIDEO INPUT
26
Disc Management
FORMATTING A DISC
27
Choosing the Recording Format of a Brand-New
DVD-RW
Reformatting a Disc Manually
27
28
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
Finalizing a Disc
30
30
31
E7PEAUD_DR430KU_EN.indd 6
2009/12/14 18:31:47
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Playback
Editing
INFORMATION ON PLAYBACK
Structure of Disc Contents
BASIC PLAYBACK
48
48
49
49
50
INFORMATION ON DISC EDITING
66
66
66
67
69
69
Guide to a Title List
Editing Discs
DELETING TITLES
CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Direct Playback
Playback from the Title List
Playing Back an Audio CD and a CD-RW/-R with
MP3/JPEG files
Playing Back a USB Device with MP3 / JPEG files
Using the Title/Disc Menu
Pause
SPECIAL PLAYBACK
Resume Playback
Fast Forward / Fast Reverse Playback
Skipping TV Commercials During Playback
Rapid Playback
51
52
53
53
54
54
54
54
55
55
EDITING DISCS
71
71
73
74
75
Putting Names on Titles
Setting Chapter Marks
Hiding Chapters
Deleting a Part of a Title
Dividing a Title
Combining Titles
Setting or Releasing the Title Protection
Setting or Clearing All Chapter Marks at Once
78
79
80
Step by Step Playback
Zoom
Marker Setting
Chasing Playback during Recording
Simultaneous Playback and Recording
56
56
57
58
59
Function Setup
LIST OF THE DEFAULT SETTINGS
81
83
83
87
89
90
92
GENERAL SETTING
Playback
Display
Video
HDMI
SEARCH
Title/Chapter Search 59
Track Search
Time Search
REPEAT/RANDOM/PROGRAM PLAYBACK/
SLIDE SHOW
Repeat Playback
Random Playback
Program Playback
Slide Show
SELECTING THE FORMAT OF AUDIO AND VIDEO 63
Switching Subtitles
Switching Audio Soundtrack
Switching Virtual Surround System
Switching Camera Angles
Reducing Block Noise
59
60
Reset All
61
61
61
62
62
Others
TROUBLESHOOTING
Frequently Asked Questions
LANGUAGE CODE
GLOSSARY
93
96
97
98
SPECIFICATIONS
LIMITED WARRANTY
99
63
63
64
64
64
65
100
Adjusting Black Level
E7PEAUD_DR430KU_EN.indd 7
2009/12/14 18:31:47
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD and CD, but also offers features for you to record on DVD and edit them after that. The
following features are offered with this unit.
Recording
Compatibility
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+RW/+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance.
This unit is compatible with recording on DVD-RW/+RW
which is recordable repeatedly and DVD-R/+R which accept
the additional recordings until the disc becomes full but
not overwritable. You can choose either one for your
convenience.
Up to 12 program recording:
You can program the unit to record up to 12 programs,
within a month in advance. Daily or weekly program
recordings are also available.
Progressive scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time
[REC I] is pressed during recording, the recording time will
be increased by 30 minutes up to 8 hours. The recording
automatically stops when the recording time you set is
reached.
DV dubbing:
This function helps you to easily dub the contents of the DVC
(digital video camcorder) to DVD.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically (the input
from the L2 jacks only).
Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Symbol Description
Automatic title menu making:
For Recording, Playing Back, and Editing
Description refers to DVD-RW in video mode
The unit creates title menu automatically when finalizing discs.
Automatic playlist making:
The unit creates a playlist automatically after recording VR
mode DVD-RW.
Description refers to DVD-RW in VR mode
Description refers to DVD-R in video mode
Description refers to DVD+RW
Automatic title finalizing:
For video mode DVD-RW/-R and DVD+R recording, you can
finalize discs automatically after finishing all timer recordings
or at the end of the disc space if you set this in the main menu.
Description refers to DVD+R
For Playback only
Playback
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you can experience the
theater surround sound from discs with surround sound system.
Description refers to DVD-video
Description refers to audio CD
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter/track or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Description refers to CD-RW/-R and USB device with MP3 files
Description refers to CD-RW/-R and USB device with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Playing back MP3/JPEG files:
You can enjoy MP3/JPEG files which are recorded on
CD-RW/-R or a USB device.
Editing
Deleting titles:
You can delete titles which you do not need anymore.
Setting or clearing chapter marks:
You can set or clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Deleting parts of titles:
You can delete a specific part of a title.
Dividing or combining titles:
You can divide or combine a title.
Editing title names:
You can change the title name you prefer.
E7PEAUD_DR430KU_EN.indd 8
2009/12/14 18:31:47
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Discs for Recording, Playing back
Disc type
Logo
DVD-RW
DVD-R
DVD+RW
DVD+R
Automatically
formatted in
video mode
Automatically
formatted in
+VR mode
Automatically
formatted in
+VR mode
Can be formatted in VR or video
mode
Format
Video Mode
VR Mode
Icon
Maximum record 480 min (12cm) 480 min (12cm) 480 min (12cm) 480 min (12cm) 480 min (12cm)
time 144 min (8cm)
144 min (8cm)
144 min (8cm)
144 min (8cm)
144 min (8cm)
1X-6X
Disc Speed
Versions
1X-16X
Ver.2.0/ 2.1
Ver.1.1/ 1.2
1X-4X
1X-16X
Ver.1.1/ 1.2 CPRM compatible
Playable on
DVD+RW
compatible
players.
Finalization
recommended.
(title menu will
be created)
Playable on
most DVD
players.
Playable on
most DVD
players.
Playable on
most DVD
Playable only
on VR mode
players.
Compatibility Finalization
necessary.
compatible unit. Finalization
Finalization necessary.
recommended. (title menu will
be created)
Finalization
recommended.
(title menu will
be created)
(title menu will
be created)
Recording Features
Record TV
✓
✓
✓
✓
✓
✓
✓
programs
Reuse by deleting
the current
contents
✓
✓
Record 16:9 size
pictures
✓
✓
✓
Record copy-once
programs
✓
Create chapters
at fixed intervals
(auto chapter)
✓
✓
✓
✓
✓
Editing Features
Scene delete
Playlist Original
✓
✓
Edit title name
✓
✓
✓
✓
✓
✓
✓
✓
Create chapters
wherever you like
(chapter mark)
✓
✓
Divide a title
Combine titles
Hide chapters
Delete a title
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Create a
playlist
Protect a title
✓: Available
Gray: Not available
*CPRM compatible disc only.
E7PEAUD_DR430KU_EN.indd 9
2009/12/14 18:31:48
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Discs for playing back
DVD-VIDEO
Disc Type
Logo
CD-DA
CD-RW
CD-R
Icon
Files for playing back
MP3
Type of title
Icon
JPEG
CD-RW/-R
USB device
CD-RW/-R
USB device
Media
is a trademark of DVD Format/Logo Licensing Corporation. Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition, the unit
may not read the disc properly.
* This unit cannot play back the disc contents protected
by Windows Media Digital Rights Management (DRM).
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x
Unplayable Discs
DVD-RW 4x
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
• CD-ROM
• Video Single Disc (VSD) • DVD-ROM
• DVD-audio
• DVD-RW/-R recorded in non compatible recording format
• Blu-ray Disc
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
• Compact Disc-Interactive (CD-I)
Performance of any other discs are not guaranteed.
• Unfinalized disc
• Toshiba is not liable for any damage or loss caused directly
or indirectly by the malfunction of this recorder, including,
without limitation, any one of the following:
• Failure to record contents intended to be recorded by
the consumer.
• HD DVD
• Failure to edit contents as intended by the consumer.
• When a DVD-RW/-R, DVD+RW/+R disc created on this
recorder is used (e.g., insertion, playback, recording or
editing) in another DVD player, recorder or personal
computer drive.
Color Systems
• When a DVD-RW/-R, DVD+RW/+R disc that is used in
the manner described in the immediately preceding
bullet point is used again in this recorder.
• When a DVD-RW/-R, DVD+RW/+R disc that was
recorded in another DVD recorder, or in a personal
computer drive is used in this recorder.
• Some functions may not work with personal computer
discs.
• Discs recorded in this recorder may not operate as
expected on other DVD players, recorders or personal
computer drives.
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that this unit
will successfully play every disc bearing the DVD and CD
logos. If you happen to experience any difficulty playing a
DVD and/or CD disc on this unit, please contact Toshiba
Customer Service.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
DVD players with
are capable of playing DVD-RW
recorded in VR mode.
E7PEAUD_DR430KU_EN.indd 10
2009/12/14 18:31:51
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
2
1
3* 4
5
6
7
8
9
10* 11
15
14 13 12
(*) The unit can also be turned on by pressing these buttons.
1. I/y ON/STANDBY button
8. SKIP G button
• Press to turn on the unit, or to turn the unit into the
• During playback, press to skip to the next chapter or track.
• During playback, press and hold for 1.5 seconds to fast
forward.
standby mode. (To completely shut down the unit, you
must unplug the AC power cord.)
• If timer programmings have been set, press to turn the unit
into the timer-standby mode.
• When playback is paused, press to play back advance step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow forward.
9. C STOP button
2. Disc tray
• Place a disc when the disc tray is opened.
3. A OPEN/CLOSE button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you can
control the unit from a distance.
5. Display
• Refer to “FRONT PANEL DISPLAY GUIDE” on page 17.
6. HDMI indicator
• Press to stop playback or recording.
10. B PLAY button*
• Press to start or resume playback.
11. I REC button
• Press once to start a recording. Press repeatedly to start
one-touch timer recording.
12. DV IN jack (L3)
• Lights up and indicates the HDMI video resolution when
HDMI output is on.
7. SKIP H button
• Use to connect the DV output of external device with a DV
cable.
13. AUDIO input jacks (L2)
• During playback, press once midway through a chapter or
track to go back to the beginning of the current chapter
or track. When pressed twice in quick succession, playback
will start from the preceding chapter or track.
• During playback, press and hold for 1.5 seconds to fast
reverse.
• Use to connect external device with an RCA audio cable.
14. VIDEO input jack (L2)
• Use to connect external device with an RCA video cable.
15. USB input jack
• You can plug your USB device here, and play back the
contents in it.
• When playback is paused, press to play back reverse step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow reverse.
1
2
3
4
5
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
PB/CB
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
10
9
8
7
6
1. VIDEO IN jack (L1)
• Use to connect external device with an RCA video cable.
2. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video inputs
with a component video cable.
4. HDMI OUT jack
• Use an HDMI cable to connect to a display with an HDMI
compatible port.
7. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
8. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
9. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device with
an S-video cable.
10.AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio cable.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely shut
down the unit.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decoder, DTS
decoder or other device with a digital audio coaxial input
jack with a digital audio coaxial cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
E7PEAUD_DR430KU_EN.indd 11
2009/12/14 18:31:54
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Installing the Batteries in the Remote
Using a Remote Control
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
Install 2 AA (1.5 V) batteries matching the polarity
indicated inside battery compartment of the remote
control.
•
Open the cover.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
Line of sight: approx. 23 feet (7m)
Either side of the center:
approx. 23 feet (7m) within 30°
30˚
30˚
23feet (7m)
23feet (7m)
23feet (7m)
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
15
16
1
OPEN/
INPUT
CLOSE SELECT
HDMI
2*
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
3
SATELLITE
PQRS
TUV
LINK
17
18
19
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
4
5
20
25
TOP MENU
21
ENTER
6
22
23
Never throw batteries into a fire.
CLEAR
RETURN
7
SKIP
REV
FWD
SKIP
• Be sure to use AA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace
batteries with new ones.
8
24
26
27
29
9
PAUSE
PLAY
STOP
10
11*
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
12
13
REPEAT REC MODE REC
ZOOM
28
30
14
• When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.
SE-R0265
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.
E7PEAUD_DR430KU_EN.indd 12
2009/12/14 18:31:56
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
) The unit can also be turned on by pressing these buttons.
1. INPUT SELECT button
16. I/y ON/STANDBY button
• Press to select the appropriate input.
2. OPEN/CLOSE A button*
• Press to open or close the disc tray.
3. Number/Character buttons
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main
menu.
• Press to enter title names.
4. SETUP button
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord).
• If timer programmings have been set, press to turn
the unit into the timer-standby mode.
17. SATELLITE LINK button
• Press to turn the unit into the satellite link standby
mode.
• In the satellite link standby mode, press to cancel the
mode and to turn the unit on.
18. TIMER PROG. button
• Press to display the timer programming list.
to the interlace mode. (Though
output mode switches to the interlace and
” will be displayed on the front panel
appears, the
19. AUDIO
button
• Press to display the audio menu during playback.
20. DISPLAY button
• Press to display the display menu on or off.
21. MENU/LIST button
• Press to display the disc menu. To change original
and playlist on the TV screen.
22. ENTER button
display briefly.)
5. TOP MENU button
• Press to display the title list.
6. Cursor K / L / { / B buttons
• Press to select items or settings.
7. CLEAR button
• Press to confirm or select menu items.
• Press to clear the password once entered, to cancel
the programming for CD, to clear the selecting
marker number in the display menu, etc.
8. SKIP H button
23. RETURN button
• Press to return to the previous displayed menu
screen.
24. SKIP G button
• During playback, press to return to the beginning of
the current chapter, track or file.
• During playback, press twice in quick succession to
skip to the previous chapter or track.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
9. REV E button
• During playback, press to fast reverse playback.
• When playback is in pause, press to slow reverse
playback.
10. PAUSE F button
• Press to pause playback or recording.
11. PLAY B button*
• Press to start playback or resume playback.
12. TIME SLIP button
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to
forward the playback step by step.
25. FWD D button
• During playback, press to fast forward playback.
• When playback is in pause, press to slow forward
playback.
2 6. STOP C button
• Press to stop playback or recording.
• Press to exit from the title list.
27. INSTANT SKIP button
• During playback, press to skip 30 seconds.
28. 1.3x/0.8x PLAY button
• During playback, press to play back in a slightly
faster/slower speed while keeping the sound output.
29. ZOOM button
• Press once to start recording the TV program you
are watching. Press again to watch the content
being recorded from the beginning while recording
continues. (VR mode DVD-RW with the recording
mode of LP, EP or SLP only)
• During playback, press to enlarge the picture on the
TV screen.
30. REC I button
13. REPEAT button
• Press to display the repeat menu.
14. REC MODE button
• Press to switch the recording mode.
15. HDMI button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
• Press to set the HDMI video resolution.
E7PEAUD_DR430KU_EN.indd 13
2009/12/14 18:31:57
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
On-Screen Display / Menu
The on-screen display changes in the following order
Disc Information / Menu
as you press [DISPLAY].
5
2
OFF
1/
5
1/
5
0:01:00 / 1:23:45
-RW VR ORG
Disc Information/Menu
L1 (Rear)
6
1
3
Title Name Information
(only when DVD+RW/+R, VR mode DVD-RW/-R, or
unfinalized Video mode DVD-RW/-R is in playback)
or
SP
1:53
4
7
File Name Information
(only when a CD with MP3/
JPEG files is in playback)
* This is an example screen only for explanation.
1. Indicates a disc type and format mode.
2. Indicates a type of titles for VR mode DVD-RW .
3. Indicates a selected external input mode.
4. Indicates a recording mode and possible recording
time left.
MP3 Tag Information
(only when a MP3 file is in playback)
5. Indicates a title number / total number of titles, chapter
number / total number of chapters, elapsed time and
total time of disc playback.
HDMI Information
(only for the images output through the HDMI output)
6. Each icon means:
: Search
: Audio
: Subtitle
: Angle
: Marker
: Noise Reduction / Black Level
: Zoom
: Surround
: Repeat
7. Indicates an operation status.
• In some descriptions on this manual, only one disc
type is indicated as an example.
Title/File Name Information
Title name information
Title Name
My Title
File name information
File Name
My File
E7PEAUD_DR430KU_EN.indd 14
2009/12/14 18:31:59
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Tag Information
• If you press [DISPLAY] one more time, album name
will be displayed.
Album Name
• If there is no artist, track or album name, “Not Available”
will be displayed.
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [ENTER] to display the
menu. These menus provide entries to all main functions
of the unit.
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
Setup
4. DVD Menu:
To set up the DVD setting.
5. DISC Playback Mode:
To set up the disc playback setting.
• “DISC Playback Mode” is available only when an audio
CD, a CD-RW/-R with MP3 / JPEG files is inserted into
the unit.
General Setting
Timer Programming
Title List
DVD Menu
DISC Playback Mode
USB Playback Mode
6
6. USB Playback Mode:
To set up the USB playback setting.
• “USB Playback Mode” is available only when a USB
device is connected.
General Setting Menu
1. Playback:
General Setting
1
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
2
Playback
Display
Video
Recording
Clock
HDMI
Reset All
3
4
5
26
37
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. HDMI:
To set up the HDMI connection setting.
7. Reset All:
To reset the setting to the factory default.
E7PEAUD_DR430KU_EN.indd 15
2009/12/14 18:32:00
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
DVD Menu / DISC Playback Mode
(DVD-RW, DVD+RW only)
Allows you to format the disc.
DVD Menu
1
2
3
4
Format
Finalize
Disc Protect OFF
Allows you to finalize a disc containing recorded titles.
(VR mode DVD-RW, DVD+RW/+R only)
Allows you to protect a disc from accidental editing or
recording.
ON
Delete All Playlists
4. Delete All Playlists (VR mode DVD-RW only)
Allows you to delete playlist.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.
Allows you to make settings for MP3 playback.
<DISC Playback Mode menu>
DISC Playback Mode
15
26
Random Play
Program Play
Allows you to make settings for JPEG playback.
(JPEG files only)
Allows you to select the display time of the slide show
When a JPEG / MP3 disc is inserted:
DISC Playback Mode
Music
Photo
37
38
Random Play
Slide Show
35
39
USB Playback Mode
1. Music:
USB Playback Mode
Allows you to make settings for MP3 playback.
2. Photo:
Allows you to make settings for JPEG playback.
3. Random Play:
Music
Photo
1
2
Random Play
Slide Show
3
4
Allows you to activate the random playback feature.
4. Slide Show: (JPEG files only)
Allows you to select the display time of the slide show
mode.
E7PEAUD_DR430KU_EN.indd 16
2009/12/14 18:32:02
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL DISPLAY GUIDE
2
BS CS
DR
CD
1
PM
3
HDD
4
1.
4. Displays the following
• Elapsed playback time
: Appears in the afternoon with the clock display.
PM
• Current title / chapter / track / file number
• Recording time / remaining time
• Clock
• Selected external input position
• Remaining time for one-touch timer recording
• Selected HDMI video resolution
2. Title / track and chapter mark
: Appears when indicating a title / track number.
: Appears when indicating a chapter number.
: Appears when playback is paused.
: Appears when playing back a disc.
: Appears when the timer programming or OTR
has been set and is proceeding.
: Flashes when all timer recordings have been
finished.
: Appears during recording process.
: Flashes when a recording pauses.
: Appears when a disc is in this unit.
Display Message
Appears when the disc tray is
opening.
Appears when HDMI video
resolution (480p) is selected.
Appears when HDMI video
resolution (720p) is selected.
Appears when the disc tray is
closing.
Appears when a disc is loaded
on the disc tray.
Appears when HDMI video
resolution (1080i) is selected.
Appears when data is being
recorded on a disc.
Appears when HDMI video
resolution (1080p) is selected.
E7PEAUD_DR430KU_EN.indd 17
2009/12/14 18:32:03
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures
may be distorted due to the copy protection system.
When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
Connecting to an External Tuner
RCA video cable
RCA audio cable
VIDEO IN
RCA video
cable
VIDEO VIDEO
IN OUT
R
L
AUDIO OUT VIDEO OUT
AUDIO IN
L
L
RCA audio
cable
L
external tuner
R
R
R
IN
AUDIO IN
(L1)
S-VIDEO
AUDIO OUT
ANT.OUT ANT. IN
satellite
dish
rear of this unit
ANT. IN
VIDEO VIDEO
IN OUT
RF coaxial cable
Y
L
L
HDMI OUT
PB/CB
R
R
IN
S-VIDEO
PR/CR
OUT
COAXIAL
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
A
UDIO OUT
S-VIDEO
PCM BITSTREAM
/
or
cable TV
company
After making the connection as described above, make sure to select the appropriate input type by following the
steps on page 26.
• Required cables and connecting methods differ depending on the external tuner.
For more information, please contact your external tuner provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external
tuner is turned on.
• You cannot record one channel while watching another channel.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Refer to
If Your TV has
If your device has
only an ANT. IN jack
Higher
Quality
HDMI IN
page
19
page
21
ANT. IN
page
20
COMPONENT VIDEO IN
S-VIDEO IN
page
20
page
21
Standard
Quality
R
L
AUDIO IN VIDEO IN
E7PEAUD_DR430KU_EN.indd 18
2009/12/14 18:32:08
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
HDMI IN
HDMI cable
HDMI OUT
rear of this unit
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
PB/CB
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
HDMI Video Resolution and Actual Output Signals
Press [HDMI] to select the HDMI video resolution. The video resolution changes as follows every time [HDMI] is
pressed.
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
Press [HDMI]
1080 Progressive
Press [HDMI]
• The HDMI mode that is not supported by display device will be skipped.
Note for HDMI Connection
• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate
properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit
can be controlled by another device via the HDMI connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI
converter cable, the signals are output in digital RGB.
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.
Please check and set the HDMI setting again.
E7PEAUD_DR430KU_EN.indd 19
2009/12/14 18:32:10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting to a TV with Component Video Input jacks
COMPONENT
VIDEO IN
(Green)
(Green)
Y
Y
(Blue)
RCA component
video cable
(Blue)
PB
/CB
PB/CB
(Red)
(Red)
PR
/CR
PR/CR
COMPONENT
VIDEO OUT
VIDEO IN
VIDEO
OUT
AUDIO IN
L
L
RCA audio
cable
R
R
AUDIO OUT
rear of this unit
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Connecting to a TV with an S-Video Input Jack
VIDEO IN
AUDIO IN
VIDEO
OUT
L
RCA audio cable
L
R
S-VIDEO IN
S-video cable
R
AUDIO OUT
OUT
S-VIDEO
rear of this unit
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
E7PEAUD_DR430KU_EN.indd 20
2009/12/14 18:32:12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting to a TV with Audio / Video Input Jacks
VIDEO IN
RCA video cable
VIDEO
OUT
AUDIO IN
L
L
RCA audio cable
R
R
AUDIO OUT
rear of this unit
VIDEO VIDEO
IN
OUT
Y
L
L
HDMI OUT
PB/CB
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Connecting to a TV without Audio / Video Input Jacks
ANT. IN
Set channel 3 or 4
rear of this unit
VHF / UHF
VIDEO VIDEO
IN
OUT
Y
L
L
antenna
HDMI OUT
PB/CB
R
R
IN
S-VIDEO
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
A
UDIO OUT
S-VIDEO
/
VIDEO VIDEO
IN OUT
external tuner
or
RCA video cable
RCA audio cable
L
L
cable TV
company
R
L
ANT.OUT ANT. IN
AUDIO OUT VIDEO OUT
R
R
IN
AUDIO IN
(L1)
S-VIDEO AUDIO OUT
RCA audio cable
RF coaxial cable
RCA video cable
RF coaxial cable
R
L
3
4
RF coaxial cable
ANT. IN
AUDIO IN VIDEO IN
CHANNEL
TO TV
RF modulator
Set channel 3 or 4
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
E7PEAUD_DR430KU_EN.indd 21
2009/12/14 18:32:13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Digital Audio Connection
Coaxial Cable Connection
Dolby Digital decoder
rear of this unit
COAXIAL
VIDEO VIDEO
IN
OUT
digital audio
coaxial cable
Y
L
L
HDMI OUT
PB/CB
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
COAXIAL
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
digital audio
coaxial input jack
HDMI Audio Connection
AV receiver / amplifier with an HDMI input jack
rear of this unit
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
HDMI IN
PB/CB
R
R
HDMI cable
IN
S-VIDEO AUDIO OUT
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO
/
HDMI OUT
To set up “HDMI Audio”, refer to pages 82 and 90-91.
No supplied cables are used in these connections:
Please purchase the necessary cables at your local store.
Multi Channel Digital Audio Setting
To set up “Dolby Digital”, refer to pages 81 and 83-85.
Setting in the Setup Menu
Actual Audio Output
Dolby Digital Setting
of this unit (refer to
page 85)
DTS Setting of
this unit
(refer to page 85)
DIGITAL AUDIO
OUTPUT
Audio Format (disc)
HDMI OUT
Stream
PCM
Dolby Digital
2 channel PCM
DTS®
Dolby Digital
2 channel PCM
DTS®
Dolby Digital
DTS®
ON
ON
OFF
No output
No output
Stream
PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
LPCM
E7PEAUD_DR430KU_EN.indd 22
2009/12/14 18:32:14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by
an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround
sound as heard in the movie theaters.
• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
• For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting (Refer to page 85).
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit
length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output connector.
• If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.
2 Channel Analog Audio Connection
stereo system
VIDEO
OUT
analog audio
rear of this unit
input jacks
L
VIDEO VIDEO
IN OUT
Y
L
L
HDMI OUT
AUDIO IN
PB/CB
R
L
R
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
/
R
AUDIO OUT
RCA audio cable
AUDIO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
E7PEAUD_DR430KU_EN.indd 23
2009/12/14 18:32:16
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
When you turn on this unit for the first time, you need to follow these steps after you have completed all the
connections.
After you have made all the
necessary connections, press
[I/y ON/STANDBY] to turn on the
OPEN/
INPUT
CLOSE SELECT
HDMI
Turn on your TV.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
SATELLITE
LINK
Press the button on the TV’s remote
control that accesses the external
input channel. It may be labeled
“SOURCE”, “AV” or “SELECT” (refer to
your TV’s user manual). Or press “2”
on the TV’s remote control, then
press channel down button
repeatedly until you see the “Initial
Setting” menu
PQRS
TUV
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
ENTER
CLEAR
RETURN
Initial Setting
SKIP
REV
FWD
SKIP
OSD Language
English
Français
Español
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Select the language for Setup display.
REPEAT REC MODE REC
ZOOM
Use [K L] to select your desired
language, then press [ENTER] to set
language.
Press [ENTER] to activate “Clock
Setting”.
SE-R0265
Initial Setting
Clock Setting
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
:
ENTER: Set Clock.
RETURN: Exit Initial Setting.
Proceed to step 4 in “Clock Setting”
on page 25.
E7PEAUD_DR430KU_EN.indd 24
2009/12/14 18:32:16
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming.
Clock Setting
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
SATELLITE
LINK
PQRS
TUV
Use [K / L] to select calendar or time,
then press [ENTER].
TIMER
PROG.
SPACE
Clock Setting
SETUP DISPLAY AUDIO
MENU/LIST
JAN / 01 / 2010 ( FRI )
12 : 00 AM
TOP MENU
Use [{ B] to select an item to set,
and use [K L] to select the contents
to suit your preference, then press
[ENTER].
ENTER
CLEAR
RETURN
SKIP
REV
FWD
SKIP
Clock Setting
PAUSE
PLAY
STOP
JAN / 01 / 2010 ( FRI )
12 : 00 AM
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Your setting will be activated.
The clock start counting when you press
[ENTER]
REPEAT REC MODE REC
ZOOM
Press [SETUP] to exit.
SE-R0265
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds.
• For setting the day, year, hour and minute,
[the Number buttons]
• You can set the built-in calendar from the year 2009
up to 2059.
E7PEAUD_DR430KU_EN.indd 25
2009/12/14 18:32:18
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR THE VIDEO INPUT
You must let the unit know which video input jack you are using before making a recording.
Press [SETUP].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “General
Setting”, then press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K L] to select “Video”, then
press [ENTER].
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Use [K L] to select “Select Video”,
then press [ENTER].
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Use [K / L] to select the desired
external input position, then press
ENTER
CLEAR
RETURN
[ENTER].
SKIP
REV
FWD
SKIP
Use [K L] to select the input jack
type to connect, then press [ENTER].
PAUSE
PLAY
STOP
If you want to use VIDEO IN jack, select “Video
In”, then press [ENTER]
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
If you want to use S-VIDEO IN jack, select
“S-Video In”, then press [ENTER]
REPEAT REC MODE REC
ZOOM
General Setting
Playback
Display
Video
Progressive
TV Aspect
Recording
Clock
HDMI
Select Video-L1(Rear)
Video In
S-Video In
Reset All
SE-R0265
Press [SETUP] to exit.
E7PEAUD_DR430KU_EN.indd 26
2009/12/14 18:32:20
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW once it has been used.
Press [SETUP].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “DVD Menu”,
then press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Setup
General Setting
Timer Programming
Title List
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
DVD Menu
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
Use [K / L] to select “Format”, then
press [ENTER].
TOP MENU
DVD Menu
Format
Finalize
ENTER
CLEAR
RETURN
Use [K / L] to select “Format Mode”,
then press [ENTER].
SKIP
REV
FWD
SKIP
DVD Menu
PAUSE
PLAY
STOP
Format
Finalize
Start
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Format Mode
REPEAT REC MODE REC
ZOOM
Use [K / L] to select “Video mode” or
“VR mode”, then press [ENTER].
Press [SETUP] to exit.
SE-R0265
Formatting will start.
Formatting
90%
• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R and DVD+RW/+R.
• You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the “Setup” menu only. To reformat a disc
(change disc format type), refer to “Reformatting a
Disc Manually” on page 28.
Formatting is completed.
“100%” is indicated.
E7PEAUD_DR430KU_EN.indd 27
2009/12/14 18:32:21
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A DISC
Reformatting a Disc Manually
If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.
Press [SETUP].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “DVD Menu”,
then press [ENTER].
SATELLITE
LINK
PQRS
TUV
Setup
General Setting
Timer Programming
Title List
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
DVD Menu
TOP MENU
Use [K / L] to select “Format”, then
press [ENTER].
e.g.) VR mode DVD-RW
ENTER
DVD Menu
CLEAR
RETURN
Format
Finalize
Disc Protect OFF
ON
SKIP
REV
FWD
SKIP
Delete All Playlists
PAUSE
PLAY
STOP
Use [K L] to select “Start”, then
press [ENTER].
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
DVD Menu
REPEAT REC MODE REC
ZOOM
Format
Finalize
Start
Disc Protect OFF
Delete All Playlists
ON
Format Mode
Selection menu will appear and prompt you to
confirm.
• For DVD+RW, use [K / L] to select “Yes”, then
press [ENTER]
SE-R0265
Use [K / L] to select “Yes”, then press
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
Are you sure?
Yes
No
Note
• When you reformat the disc, the contents of the disc
are erased.
Formatting is completed.
“100%” is indicated.
• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 27.)
• This unit may not be able to reformat a disc that is
not previously formatted by this unit e.g. DVD disc
formatted by PC or another recorder.
Formatting
100%
E7PEAUD_DR430KU_EN.indd 28
2009/12/14 18:32:22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “DVD Menu” menu.
Press [SETUP].
Use [K / L] to select “DVD Menu”,
then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “Disc Protect
OFF ON”, then press [ENTER].
e.g.) VR mode DVD-RW
SATELLITE
LINK
PQRS
TUV
DVD Menu
TIMER
PROG.
SPACE
Format
Finalize
Disc Protect OFF
ON
SETUP DISPLAY AUDIO
MENU/LIST
Delete All Playlists
TOP MENU
ENTER
CLEAR
RETURN
Use [K L] to select “Yes”, then press
[ENTER].
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
Protect this disc?
Yes
No
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
A disc will be protected.
REPEAT REC MODE REC
ZOOM
This operation may take
awhile to be completed.
SE-R0265
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
DVD Menu
Format
Finalize
Disc Protect ON
OFF
Delete All Playlists
To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
E7PEAUD_DR430KU_EN.indd 29
2009/12/14 18:32:24
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP] and use [K L] to
select “General Setting”, then press
[ENTER].
“General Setting” menu will appear.
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
timer recordings and at the end of the disc space.
Use [K / L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “Auto Finalize”,
then press [ENTER].
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
Use [K L] to select “Disc Full” or
“End of Timer Rec”, then press
[ENTER].
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
Auto Finalize
TOP MENU
Disc Full
End of Timer Rec
ENTER
CLEAR
RETURN
Use [K L] to select “ON”, then press
[ENTER].
SKIP
REV
FWD
SKIP
Disc Full
PAUSE
PLAY
STOP
ON
OFF
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
End of Timer Rec
REPEAT REC MODE REC
ZOOM
ON
OFF
Press [SETUP] to exit.
SE-R0265
• This function is not available after finishing daily or
weekly program recording.
E7PEAUD_DR430KU_EN.indd 30
2009/12/14 18:32:25
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize discs to play back on other DVD
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of
the disc, a shorter recording period on the disc will
require a longer time period for finalization. Do not
unplug the power cord during finalization.
Use [K / L] to select “DVD Menu”,
then press [ENTER].
“DVD Menu“ menu will appear.
Use [K / L] to select “Finalize”, then
press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
SATELLITE
LINK
Finalize disc?
PQRS
TUV
Yes
No
TIMER
PROG.
SPACE
Finalizing will start.
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
ENTER
CLEAR
RETURN
Finalizing
90%
SKIP
REV
FWD
SKIP
This operation may take
awhile to be completed.
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Finalizing is completed.
REPEAT REC MODE REC
ZOOM
SE-R0265
EN 31
E7PEAUD_DR430KU_EN.indd 31
2009/12/14 18:32:27
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
• Finalizing a disc in video mode and +VR mode
automatically creates a title menu.
• After you finalize the DVD+RW, you can call up the
title list by pressing [TOP MENU], or you can call up
the title menu by pressing [MENU/LIST]
• Even after DVD+RW is finalized, you can still record
or edit. After you finalize DVD-RW/-R or DVD+R, you
cannot edit or record anything else on that disc.
• If you insert a DVD-RW finalized with this unit, “Undo
Finalization” will appear instead of “Finalize” at
step 3.
• To release the finalization of the DVD-RW disc, select
“Undo Finalization” at step 3.
DVD Menu
Format
Undo Finalization
Disc Protect OFF
Delete All Playlists
ON
• To undo the finalization of the DVD+RW, make an
additional recording onto the disc.
• DO NOT power off during finalizing. This may result
in a malfunction.
• For DVD+RW, if you have added or deleted chapters,
or made chapters hidden, you must finalize the disc
before being able to see those effects on other units.
To play back discs other than DVD+RW on other DVD
players, you will need to finalize.
E7PEAUD_DR430KU_EN.indd 32
2009/12/14 18:32:28
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DVD RECORDING
Recording Mode
Restrictions on Recording
You can select a recording mode among 5 options, and
the recording time will depend on the recording mode
you select as follows.
You cannot record copy-protected program using this
unit. Copy-protected video signal is included in DVD-
videos, some satellite broadcasts, some pay-per-view
stations and some “premium” stations.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
Recording time
12cm 8cm
Video/
Sound Quality
Recording mode
SP
LP
120 min 36 min
240 min 72 min
360 min 108 min
480 min 144 min
“Copy-once only” video can only be recorded to CPRM
compatible DVD-RW formatted in VR mode.
What is “CPRM”?
CPRM is a copy protection system with scramble system
regarding the recording of “copy-once” broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
SLP
• The recording times listed above are estimates and are
for reference purposes only. Actual recording times may
vary.
• The audio and video quality of content being recorded
may differ depending on the recording mode/recording
time chosen.
This unit is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
make another copy of those recordings. CPRM recordings
can only be made on CPRM compatible DVD-RW formatted
in VR mode, and CPRM recordings can only be played back
on DVD players that are specifically compatible with CPRM.
Making discs playable in other DVD players (Finalize)
For DVD-RW/-R, it is necessary to finalize the disc after
recording, in order to play back the disc on other DVD
players. (Refer to pages 30-32.) For DVD+RW/+R, it is
recommended to finalize the disc in order to make the
disc more compatible to other DVD player. When video
and +VR mode disc are finalized, a title menu is created.
You cannot finalize discs in other DVD recorders.
• This unit cannot record to CD-RW or CD-R.
• DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Discs recorded in video mode on this unit cannot
record additional information using other DVD
recorders.
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
E7PEAUD_DR430KU_EN.indd 33
2009/12/14 18:32:29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR A RECORDING
Make Recording Compatible
Setting for Auto Chapter
Use this feature to make the discs recorded on other unit
recordable on this unit. When you make an additional
recording on this unit with “Make Recording Compatible”
set to “ON”, the title list is automatically converted to our
style.
You can set a specified time for chapter marks.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
3) Use [K / L] to select “Auto Chapter”, then press
[ENTER].
2) Use [K / L] to select “Recording”, then press
[ENTER].
“Recording” menu will appear.
4) Use [K / L] to select a desired time option, then
press [ENTER].
3) Use [K / L] to select “Make Recording Compatible”,
then press [ENTER].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
4) Use [K / L] to select “ON” or “OFF”, then press
[ENTER].
Make Recording Compatible
ON
OFF
5) Press [SETUP] to exit.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
• The interval for auto chapter may be up to two
minutes different from the time option you set.
Prohibiting additional record to the disc that
• A blank chapter may be created depending on the
remaining time of the disc.
has a title list created by other units.
5) Press [SETUP] to exit.
• This function is also available for unfinalized DVD+R.
E7PEAUD_DR430KU_EN.indd 34
2009/12/14 18:32:30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR A RECORDING
Recording Audio Select (XP)
Setting Aspect Ratio for Video Mode
Recording
You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.
You can set aspect ratio for video mode recording.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
1) Follow step 1 to 2 on “Recording Audio Select(XP)”.
2) Use [K / L] to select “Aspect Ratio (Video mode)”,
then press [ENTER].
2) Use [K / L] to select “Recording”, then press
[ENTER].
“Recording” menu will appear.
3) Use [K / L] to select your desired setting, then press
[ENTER].
3) Use [K / L] to select “Recording Audio Select (XP)”,
then press [ENTER].
Aspect Ratio (Video mode)
Auto
4 : 3
4) Use [K / L] to select “PCM” or “Dolby Digital”, then
press [ENTER].
16 : 9
Auto (default): It will be recorded with whichever the
ratio that the program you started to record are
broadcasted with.
Recording Audio Select (XP)
PCM
Dolby Digital
4:3 : Recorded in the aspect ratio of 4:3.
16:9 : Recorded in the aspect ratio of 16:9.
PCM:
Records PCM audio for the best quality sound.
Dolby Digital:
4) Press [SETUP] to exit.
Records Dolby Digital audio for good quality sound.
• For DVD-RW VR mode, the image will be recorded in
whichever the ratio that the program you record are
broadcasted with, regardless of the “Aspect Ratio
(Video mode)” setting.
• For DVD+RW/+R, the image will always be recorded
in aspect ratio of 4:3.
5) Press [SETUP] to exit.
Note
• “PCM” stands for Pulse Code Modulation. It changes
analog sound to digital sound without compressing
audio data.
• When the recording mode is set at other than XP, the
unit records “Dolby Digital” audio automatically even
if you selected “PCM”.
E7PEAUD_DR430KU_EN.indd 35
2009/12/14 18:32:31
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Press [I/y ON/STANDBY].
Turn on the TV and be sure to select the input to
which the unit is connected.
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
OPEN/
INPUT
HDMI
CLOSE SELECT
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Align the disc to
the disc tray guide.
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Press [OPEN/CLOSE A] to close the
disc tray.
ENTER
It may take awhile to load
the disc completely.
CLEAR
RETURN
• When inserting a brand-new DVD-RW or
DVD+RW, the unit automatically starts to
format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 33.
SE-R0265
SP
1:53
Press [INPUT SELECT ] to select the
appropriate external input position
(L1/L2) to which your external tuner
E7PEAUD_DR430KU_EN.indd 36
2009/12/14 18:32:32
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC I] to start recording.
I” will be displayed for 5 seconds.
Press [STOP C] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 66.)
e.g.) DVD+R/DVD-RW/-R
SP
1:53
I
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.
Wait for a moment
90%
This operation may take
awhile to be completed.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
[REC I] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
I
0:30
0:30
(normal recording)
1:00
8:00
7:30
• To change the recording length during one-touch
timer recording, press [REC I] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP C]
• When you press [REC I] recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• You cannot change the recording mode during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the unit into the standby mode (One-touch timer recording will be canceled.).
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to
the timer-standby mode automatically if a timer recording has been programmed. Press [I/y ON/STANDBY] to
cancel the timer-standby mode to use the unit continuously.
EN 37
E7PEAUD_DR430KU_EN.indd 37
2009/12/14 18:32:34
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Guide to Timer Programming Display
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
3
1
2
Timer Programming
JAN/ 8/10 1:00 AM L1 SP
SP (1:00)
THU JAN/07 10:00AM
Before recording, make sure
Date
Start
End
L1/L2
L1
• Connect the external tuner to either L1 or L2 and set it
to output audio/video signals when it comes to the time
you want to start recording.
JAN/08
1:00AM 2:00AM
New Program
• Do not change the external tuner’s channel while you
are recording. You cannot watch one channel and
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
1/1
4
5
1. Title of a Timer Program (Contains date, time, external
input, recording mode of the program)
2. Current
3. Recording mode and length of the recording
4. Timer program list
5. Total number of pages and current page (2 pages maximum)
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Press [TIMER PROG.].
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
Use [K / L] to select “New Program”,
then press [ENTER].
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
Timer Programming
TOP MENU
THU JAN/07 10:00AM
Date
Start
End
L1/L2
New Program
ENTER
CLEAR
RETURN
1/1
SKIP
REV
FWD
SKIP
• If there are 6 or more programs, use
[SKIP j / i] to change pages.
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
Note
• If you have not set the clock yet:
“Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 3 in
“Clock Setting” on page 25 before setting a timer programming.
• Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.
• You cannot make a program whose recording time exceeds 12 hours.
• Cancel the timer-standby mode by pressing [I/y ON/STANDBY] before operation. When finished operating, press
[I/y ON/STANDBY] to resume the timer-standby mode.
E7PEAUD_DR430KU_EN.indd 38
2009/12/14 18:32:36
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K L] to enter the date, then
press [B].
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
Date
JAN/08
L1/L2
L1
Start
- - : - -
Mode
SP
End
- - : - -
SP
2 : 00
Date
JAN/08
L1/L2
L1
Start
1 : 00AM
Mode
End
2 : 00AM
JAN/01
Daily
Auto
When pressing [L]
the current date, the
date will change as
Auto
1 : 00
MON-SAT
MON-FRI
SAT
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
e.g.) January 1st
FRI
SUN
Press [ENTER] when all items are
JAN/31
After displaying an instructive message for 10
seconds, timer program list will appear.
Use [K L { B] or [the Number
buttons] to enter the start and end
time, then press [B].
Press ON/STANDBY toTimer Standby mode.
Ensure the external source is turned to
the correct channel.
Date
JAN/08
L1/L2
L1
Start
1 : 00AM
Mode
SP
End
- - : - -
Timer Programming
JAN/ 8/10 1:00 AM L1 SP
SP
2 : 00
SP (1:00)
Date
JAN/08
THU JAN/07 10:00AM
Start
End
L1/L2
L1
• You cannot make a program whose recording
time exceeds 12 hours.
1:00AM 2:00AM
Your program setting is stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP]
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 40.
Use [K / L] to select an appropriate
external input (L1/L2) to which your
external tuner is connected, then
press [B].
Date
JAN/08
L1/L2
L1
Start
1 : 00AM
Mode
SP
End
2 : 00AM
SP
1 : 00
Press [I/y ON/STANDBY] to set a
timer programming.
will appear on the front panel display, while this
unit waits to make the recording.
Use [K / L] to select a recording
mode.
Date
JAN/08
L1/L2
L1
Start
1 : 00AM
Mode
SP
End
CS
DR
CD
2 : 00AM
HDD
SP
1 : 00
Refer to “Recording Mode” on page 33.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date
JAN/08
L1/L2
L1
Start
1 : 00AM
Mode
SP
End
2 : 00AM
SP
1 : 00
EN 39
E7PEAUD_DR430KU_EN.indd 39
2009/12/14 18:32:38
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
To stop the timer recording in progress
If the timer program did not complete correctly,
the error number appears in the timer
programming list.
1) Press [STOP C] on the remote control.
Confirmation message will appear.
Timer Programming
THU JAN/01 10:00AM
2) Select “Yes”, then press [ENTER].
Date
E41 JAN/08
Start
1:00AM 2:00AM
New Program
End
L1/L2
L1
• To stop the timer recording immediately, press
[C STOP] on the unit.
Checking, canceling, or correcting the timer
programming information
1/1
Each error number means:
E1-22 Recording error other E40
E37-39 than below
1) Press [I/y ON/STANDBY].
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
2) Press [TIMER PROG.].
E23-24 Unrecordable disc
3) Check the information on the list you want to edit.
E25-28 Copy prohibited program
Timer Programming
E29
E30
Disc protected
Disc full
E41
E42
E43
Power failed
JAN/ 8/10 1:00 AM L1 SP
No disc when recording
SP (1:00)
Date
JAN/08
THU JAN/07 10:00AM
Start
1:00AM 2:00AM
New Program
End
L1/L2
L1
E31-32 Already 99 titles
recorded
Already 49 titles
recorded
E33
E34
E35
E36
Already 999 chapters E44
recorded
Already 254 chapters
recorded
No space for Control E45
information
Copy prohibited
program
1/1
PCA full *1
E46
It is impossible to
4-A) To delete the timer program:
record additionally
on a disc recorded
by other units
1 Use [K / L] to select the program you want to
Already finalized
video format disc
delete, then press [ENTER].
2 Use [K / L] to select “Delete”, then press
when setting
“Make Recording
Compatible” to “OFF”.
[ENTER].
Selection menu will appear.
3 Use [K / L] to select “Yes”, then press [ENTER].
4-B) To correct the timer program:
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select “Program Change”, then
press [ENTER].
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].
*1 PCA is a disc's space reserved for recording test.
5) Press [TIMER PROG.] to exit.
6) Press [I/y ON/STANDBY] to return to the timer
standby mode.
• Press [TIMER PROG.] to check the timer recording in
progress.
When the timer recording is proceeding, that
program will be highlighted in red. In this case, you
cannot select any other program.
E7PEAUD_DR430KU_EN.indd 40
2009/12/14 18:32:41
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• If a disc is not inserted or if a inserted disc is not
recordable (finalized DVD-RW/-R, finalized DVD+RW, a
• To cancel the timer standby mode, press
I/y ON/STANDBY
• When the starting and the ending time are the same,
“Exceeds 12 hours” appears and the program setting will
not be accepted.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted.
[
]
fully recorded disc, etc.),
on the front panel display
flashes and timer recording cannot be performed. In
some cases,
will appear momentarily around the start
point as the unit attempts to record. Please insert a
recordable disc.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
• When all the timer recording is completed, flashes. To
[
I/y ON/STANDBY] is pressed.
play back or eject the recorded disc, press
• “Press ON/STANDBY for timer recording” will appear on
the TV screen 5 minutes before the programmed
starting time.
[I/y ON/STANDBY] first, then select the recorded title and
press [PLAY B], or [OPEN/CLOSE A] to remove the disc.
• During timer recording or timer standby mode ( will
appear), any operations on the unit will not be available.
To make these operations available, press [STOP C] or
[C STOP] to stop the timer recording or
[
I/y ON/STANDBY] to cancel timer standby mode (
will disappear).
The Priority of Overlapped Settings
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled or start from the middle.
Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
When the starting time and the ending time
for each programs are different:
A program that has earlier start time has priority.
A program set previously (PROG. A) has priority.
PROG. A
PROG. A
PROG. B
PROG. B
PROG. C
actual
actual
PROG. A
PROG. A
PROG. C
PROG.
B
PROG. B
recording
recording
The first 2 minutes (at the longest) will be cut off.
The first 2 minutes (at the longest) will be cut off.
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
When the recording time is entirely overlapped:
PROG.A will not be recorded.
PROG. A
PROG. A
PROG. B
PROG. B
actual
recording
actual
recording
PROG. B
PROG.B
PROG.A
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
program will be displayed with errors number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
E7PEAUD_DR430KU_EN.indd 41
2009/12/14 18:32:42
Download from Www.Somanuals.com. All Manuals Search And Download.
SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
OPEN/
INPUT
CLOSE SELECT
HDMI
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
SETUP DISPLAY AUDIO
MENU/LIST
• You must let the unit know which video input jack you
TOP MENU
are using before making a recording.
Refer to “SETTINGS FOR THE VIDEO INPUT” on page 26.
ENTER
CLEAR
RETURN
Select the desired recording mode.
(Refer to “Recording Mode” on page
33.)
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Press [SATELLITE LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
REPEAT REC MODE REC
ZOOM
To cancel the satellite link function while in
the satellite link standby mode:
Press [SATELLITE LINK] or [I/y ON/STANDBY]
To cancel the satellite link function while the
satellite link recording is in progress:
SE-R0265
Press [STOP C]
• If the signal of external input breaks up over 5 seconds, recording will stop until the signal of external input comes
back again.
• You cannot set the start or the end time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
recording.
• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 43 for more
information.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are
recorded as illustrated below.
example 2
example 1
example 3
timer
recording
timer
recording
timer
recording
satellite link
satellite link
satellite link
actual
recording
actual
recording
actual
recording
The first 2 minutes (at the longest) will be cut off.
The first 2 minutes (at the longest) will be cut off.
E7PEAUD_DR430KU_EN.indd 42
2009/12/14 18:32:44
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).
Use the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use the DV IN jack on the front panel instead of VIDEO IN jack.
or
VIDEO
OUT
AUDIO OUT
DV-OUT
AUDIO OUT
VIDEO
OUT
S-VIDEO
OUT
L
R
R
L
external device
(camcorder, VCR etc.)
RCA
RCA
DV cable
(4-pin)
S-video
RCA
audio cable
RCA
video
cable
audio
cable
cable
or
video
cable
VIDEO VIDEO
IN OUT
L
VIDEO
L
R
DV IN
R
IN
S-VIDEO
AUDIO IN
(L1)
L2
L3
L1
to L2 & L3
to L1
VIDEO
IN
L
HDMI OUT
R
IN
PR/CR
OUT
COAXIAL
DIGITAL AUDIO OUTPUT
PCM BITSTREAM
AUDIO IN
(L1)
COMPONENT
VIDEO OUT
S-VIDEO
/
rear of this unit
front of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
E7PEAUD_DR430KU_EN.indd 43
2009/12/14 18:32:46
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Turn on the TV and press
[I/y ON/STANDBY], and be sure to
select the input of the TV to which
the unit is connected.
Before recording from an external device, refer to the
instructions for the connection on page 43.
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
OPEN/
INPUT
HDMI
CLOSE SELECT
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
It takes awhile to load
the disc.
SATELLITE
LINK
PQRS
TUV
Select the input of the unit which the
external device is connected. (L1, L2
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
or DV(L3))
• To use the input jacks on the rear of this unit;
Select “L1 (Rear)” by using [INPUT SELECT
]
TOP MENU
• To use the input jacks on the front of this unit;
Select “L2 (Front)” or “L3 (DV-IN)“ by using
[INPUT SELECT
]
ENTER
CLEAR
RETURN
Press [REC MODE] repeatedly to
select a recording mode.
SKIP
REV
FWD
SKIP
Refer to “Recording Mode” on page 33.
PAUSE
PLAY
STOP
Press [C STOP] on the unit to stop
recording.
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
This operation may take
awhile to be completed.
REPEAT REC MODE REC
ZOOM
Start playback on the external device
Press [I REC] on the unit to start
recording.
E7PEAUD_DR430KU_EN.indd 44
2009/12/14 18:32:47
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
Guide to DV and On-Screen Display
This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV IN jack on the front of this unit, select “L3
(DV-IN)” position by using [INPUT SELECT ] on the remote control and press [DISPLAY] to show the DV dubbing
information for the operation of your DVC.
When the DVC is
in video mode...
When the DVC is not
in camera mode...
1
1/
1
1/
1
1/
1
1/
1
-RW VR ORG
-RW VR ORG
The menu changes according to
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.
L3 (DV-IN)
AB-1234
0:12:34
Control
DV Audio
Start Rec
DVD
Stereo1
L3 (DV-IN)
AB-1234
0:12:34
5
2
SP
1:00
SP
1:00
3
4
7
6
1. DV icon
6. Product name of your DVC
2. Indicator of active device
• When the “Control” is
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
highlighted, press [ENTER] to
display the item selection. Use
[K / L] to select the device you
wish to operate, then press
[ENTER] to activate.
Each icon means (Available icons
may vary depending on the DVC):
• Select “DVD” to control this unit.
• Select “DVC” to control your DVC.
3. Recording audio mode
• Other than the DVC is in stop
mode, the “DV Audio” can be
selected. Press [ENTER] to display
the item selection and then use
[K / L] to select the audio you
wish to output. Press [ENTER]
again to activate.
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast forwarding.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is slow forwarding.
(faster than above)
• Select “Stereo1” to dub the stereo
sound.
• Select “Stereo2” to dub the sound
with after recording sound.
• Select “Mix” to dub the stereo1
4. Indicator of dubbing function
• When the unit is ready for
dubbing, “Start Rec” will appear.
• When the unit is in dubbing,
“Pause Rec” will appear.
DVC is in recording.
DVC is in recording pause
mode.
DVC is slow forwarding.
(faster than above)
5. Channel position
• When you select “L3 (DV-IN)” by
using [INPUT SELECT ], “L3
(DV-IN)” will appear.
E7PEAUD_DR430KU_EN.indd 45
2009/12/14 18:32:48
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
DVC to DVD Dubbing
Press [REC MODE] repeatedly to
select a recording mode.
(Refer to “Recording Mode” on page 33.)
Before recording from DVC, see page 43 for connection
Press [DISPLAY].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
With “Control” highlighted, press
[ENTER] to display the available
control of this unit. Use [K L] to
select “DVC”, then press [ENTER].
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
1/
1
1/
1
SETUP DISPLAY AUDIO
MENU/LIST
-RW VR ORG
Control
DV Audio
Start Rec
DVD
Stereo1
L3 (DV-IN)
AB-1234
0:12:34
TOP MENU
ENTER
XP
1:00
CLEAR
RETURN
Now you can operate your DVC with the remote
control of this unit.
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
Press [PLAY B] to start playing back
the DVC, and find the point where
you wish to start dubbing.
Then, press [STOP C] when you come
to the desired start point.
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
Use [K / L] to select “Start Rec”, then
press [ENTER].
The dubbing will start.
SE-R0265
To stop dubbing;
Use [K / L] to select “Control”, then
press [ENTER].
Use [K / L] to select “DVD”, then
press [ENTER].
Then press [STOP C].
Use [INPUT SELECT ] to select “L3
(DV-IN)”.
L3 (DV-IN)
AB-1234
0:00:00
E7PEAUD_DR430KU_EN.indd 46
2009/12/14 18:32:53
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
Note for DV dubbing
• If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• If no video signal is detected from the DVC during DVC to DVD dubbing, the recording will be paused and “I” will
flash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 45.
• You cannot dub from DVC during timer standby mode.
• During timer standby of either component, you cannot select L3(DV-IN) even on the component which is not in
timer standby.
• Date / time and cassette memory data will not be recorded.
• Pictures with a copy-guard signal cannot be recorded.
• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices with little degradation.
E7PEAUD_DR430KU_EN.indd 47
2009/12/14 18:32:57
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Structure of Disc Contents
The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.
Audio CDs are divided into tracks.
Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files.
Title:
Divided contents of a DVD video. Roughly
corresponds to a story title in short stories.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Chapter: Divided contents of a title. This corresponds to
a chapter in a story.
Track:
Divided contents of an audio CD.
Folder:
Divided contents of a MP3/JPEG data disc.
Consists of number of files.
Audio CD
Each title, chapter, or track, folder or file is assigned a
number, which is called “title number”, “chapter number”,
“track number”, “folder number” or “file number”
respectively.
Track 1 Track 2 Track 3
Track 4 Track 5
Some discs may not have these numbers.
MP3/JPEG
file 4
file 1
file 2
file 3
file 5
E7PEAUD_DR430KU_EN.indd 48
2009/12/14 18:32:57
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
Press [I/y ON/STANDBY].
Turn on the TV and be sure to select the input to
which the unit is connected.
OPEN/
INPUT
HDMI
CLOSE SELECT
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Align the disc to
the disc tray guide.
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Press [OPEN/CLOSE A] to close the
disc tray.
ENTER
CLEAR
RETURN
It may take awhile to load
the disc completely.
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
Press [PLAY B] to start playback.
If you are playing back a DVD-video, a menu
may appear.
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Refer to “Using the Title/Disc Menu” on page 53.
REPEAT REC MODE REC
ZOOM
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 54.
SE-R0265
• Some discs may start playback automatically.
E7PEAUD_DR430KU_EN.indd 49
2009/12/14 18:32:58
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
OPEN/
INPUT
HDMI
CLOSE SELECT
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Align the disc to
the disc tray guide.
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Press [OPEN/CLOSE A] to close the
disc tray.
SETUP DISPLAY AUDIO
MENU/LIST
It may take awhile to load
the disc completely.
TOP MENU
ENTER
Press [TOP MENU].
Title list will appear.
Press [MENU/LIST] to switch Original/Playlist if
necessary.
• To exit the title list, press [STOP C]
• To resume the title list, press [TOP MENU]
CLEAR
RETURN
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Use [K / L / { / B] to select a desired
title, then press [ENTER].
REPEAT REC MODE REC
ZOOM
e.g.) VR mode DVD-RW original
Title List
ORG
JAN/ 7/10 1:00AM L1 SP
1:00AM (0:12:00)
JAN/ 7/10
L1 SP
1
2
3
6
SE-R0265
4
5
1 / 6
Use [K / L] to select “Play From
Start”, then press [ENTER].
Press [I/y ON/STANDBY].
Play From Start
Edit
Title Delete
Add To Playlist
Turn on the TV and be sure to select the input to
which the unit is connected.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 54.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
• You can also start playback by pressing [PLAY B]
[ENTER]
• At step 4, you can press [SKIP G], or press [B]
when the title on the lower right of the title list is
highlighted to display the next page, and press
[SKIP H], or press [{] when the title on the upper
left of the title list is highlighted to display the
previous page.
E7PEAUD_DR430KU_EN.indd 50
2009/12/14 18:32:59
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG files
When selecting track/file:
Playback will start.
When selecting folder:
OPEN/
INPUT
HDMI
CLOSE SELECT
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [ENTER]
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
• Press [PLAY B] [ENTER] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
SATELLITE
LINK
PQRS
TUV
Hints for audio CD tracks and MP3 / JPEG files:
• Folders are shown by
TIMER
PROG.
SPACE
• Audio CD tracks are shown by
SETUP DISPLAY AUDIO
MENU/LIST
3
• MP3 files are shown by
• JPEG files are shown by
TOP MENU
• The system can recognize up to 255 folders and, up to
99 tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “…”.
ENTER
CLEAR
RETURN
•
If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
SKIP
REV
FWD
SKIP
<MP3>
PAUSE
PLAY
STOP
• Sampling frequency
• Constant bit rate
<JPEG>
: 44.1 kHz or 48 kHz.
: 112 kbps - 320 kbps.
Follow steps 1 to 2 in “Direct
Playback” on page 49.
• Upper limit
• Lower limit
• File size of image maximum : 12 MB.
: 6,300 x 5,100 dots.
: 32 x 32 dots.
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
When an audio CD is inserted, track list will
appear.
When you insert a CD-RW/-R mixed with MP3/
JPEG files, the playback media selection screen
will be displayed.
For MP3, select “Music”, for JPEG, select “Photo”.
When a CD-RW/-R with MP3/JPEG files is
inserted, file list will appear.
• To exit the file list, press [STOP C]
• To resume the file list, press [TOP MENU]
Press [MENU/LIST] to call up the playback
media selection screen in stop mode.
• Files whose extension is other than “.mp3(MP3)” or
“.jpg / .jpeg(JPEG)” will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
• The JPEG pictures can also rotate by using [s / B].
This DVD Video Recorder requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. There are many different types
of recordable disc formats (including CD-R containing
MP3 files). Not all recordable discs will operate or
produce optimal playback quality. The technical criteria
set forth in this owner's manual are meant only as a
guide. Use of CD-RW for MP3 files is not recommended.
Use [K / L] to select a desired folder
or track/file, then press [ENTER].
e.g.) JPEG file list
File List
DISC NAME
A
B
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
1/ 2
EN 51
E7PEAUD_DR430KU_EN.indd 51
2009/12/14 18:33:01
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back a USB Device with MP3 / JPEG files
In stop mode, plug your USB flash
memory.
File type selection screen will appear.
USB device requirements:
• USB version 2.0 (Full Speed).
systems are supported.
• Up to 8 characters (excluding the extension) are
displayed as a file and folder names. 9 or more
characters cannot be displayed.
Compatible device:
• USB flash memory (maximum size : 32GB)
Incompatible device:
• USB hub
• USB device with inner hub
Title List
DISC
USB
Music
Photo
• Cameras
• Devices that need to install drivers
(e.g. some MP3 players)
Select the desired file type using
[K / L], then press [ENTER].
• If you want to change the media type, press
[{]
Select the desired media type using [K / L]
then press [ENTER]. (You can also access the
media type selection screen from the “Title
List” in the “Setup” menu in stop mode.)
• Music: The MP3 File List will appear.
• Photo: The JPEG File List will appear.
Follow the step 3 in “Playing Back an
JPEG files” on page 51.
Note
• The unit cannot play back a USB device at the
following condition.
- During the operation of the disc tray.
- During the disc loading, DVD recording, DVD/CD
playback, editing or dubbing.
- While “Title List” or “File List” of disc is displayed.
- While “Setup” or “Timer Programming” menu is
displayed.
• Do not disconnect the USB device while the indicator
on the device is flickering.
E7PEAUD_DR430KU_EN.indd 52
2009/12/14 18:33:03
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Pause
Using the Title/Disc Menu
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
DVD may contain a title list, which describes the contents
of the disc, or a disc menu, which guides you through the
available functions in the disc.
1)Press [TOP MENU] or [MENU/LIST] to call up the title
list or disc menu.
2)Use [K / L / { / B] to make a selection, and then
press [ENTER] to enable your selection.
F
3)Press [STOP C] to exit the disc menu.
2)Press [PLAY B] to return to the normal playback.
Note
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
[MENU/LIST] or [TOP MENU] will not always be
effective for all DVDs.
• For DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 86.)
E7PEAUD_DR430KU_EN.indd 53
2009/12/14 18:33:05
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Skipping TV Commercials During
Resume Playback
Playback
You can play back from where you stopped playing back
the disc last.
1)During playback, press [STOP C].
The resume message will appear.
You can skip TV commercials to enjoy the recorded
programs without interrupting.
During playback, press [INSTANT SKIP].
Resume ON
Normal playback will start at 30 seconds ahead from
where you press [INSTANT SKIP]
Every time you press [INSTANT SKIP], the searching
point will be extended by 30 seconds ahead.
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn the unit into the
standby mode.
You can press [INSTANT SKIP] up to 6 times (180 seconds).
e.g.) Press [INSTANT SKIP] once.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
• For MP3/JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
• For USB devices, the file list will appear at step 1)
- Press [STOP C] again to exit from the file list.
- Press [PLAY B] to resume playback.
Instant Skip 30sec.
(forwarding 30 seconds)
Fast Forward / Fast Reverse Playback
1)During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E]
approximate speed will be changed as follows.
B
Fast forward or fast reverse playback across titles (for
DVD), or files (for MP3 files) is not possible.
Playback will return to the normal playback.
FWD
FWD
FWD
FWD
FWD
FWD
normal
speed
REV
REV
REV
REV
REV
REV
40x
20x
5x
2x
20x
40x
playback
For audio CD or MP3 files, approximate speed is fixed
at 8x with sound.
2)Press [PLAY B] to return to the normal playback.
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
E7PEAUD_DR430KU_EN.indd 54
2009/12/14 18:33:06
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Rapid Playback
Slow Forward / Slow Reverse Playback
Rapid playback function is available only during
playback.
1)During playback, press [PAUSE F]. Then press
[FWD D] or [REV E].
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
Every time you press [FWD D] or [REV E]
approximate speed will be changed as follows. (The
sound will remain muted.)
1)During playback, press [1.3X / 0.8X PLAY].
FWD
FWD
FWD
FWD
FWD
FWD
REV
REV
REV
REV
REV
REV
pause
Press [1.3X / 0.8X PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B
B x1.3:
B :
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
2)Press [PLAY B] to return to the normal playback.
Press [1.3X / 0.8X PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
• Forward/reverse speed will be indicated with icons
as follows.
Press [1.3X / 0.8X PLAY] thrice to play back in
normal speed.
No effects.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
2)Press [PLAY B] to return to the normal playback.
reverse (approx. speed)
Note
1/16x:
1/8x:
1/4x:
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is LPCM (2 channel) during rapid playback.
Step by Step Playback
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Press [SKIP i ] repeatedly.
Playback will advance one frame at a time when you
press [SKIP i ] with the sound muted.
To play back step by step backward:
Press [SKIP j ] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
[SKIP j ] / [SKIP i ] to reverse/
advance continuously.
3)Press [PLAY B] to return to the normal playback.
E7PEAUD_DR430KU_EN.indd 55
2009/12/14 18:33:09
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Zoom
Marker Setting
1)During playback, press [DISPLAY] or [ZOOM].
• If you press [ZOOM], skip to step 3.
This feature allows you to assign a specific point on a disc
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
menu.
e.g.) DVD-video
2)Use [{ / B] to select
e.g.) DVD-video
to display the marker list.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired zoom factor to zoom,
then press [ENTER].
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1
2
3
4
5
6
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
The title (track) number and the time will be displayed.
Zoom area will be displayed.
4)To return to the marker:
Use [K / L] to select the desired marker number
then press [ENTER].
4)Use [K / L / { / B] to select a desired zoom
position, then press [ENTER].
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR]
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
Zoom playback will start.
– Turning the unit into the standby mode
– Recording on a recordable disc
• You can mark up to 6 points.
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [RETURN] repeatedly.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [ENTER] at step 3.
• You cannot slide the zoomed picture on some JPEG
files.
E7PEAUD_DR430KU_EN.indd 56
2009/12/14 18:33:13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Chasing Playback during Recording
You can play back the already recorded part of the
currently recording program without waiting for the
recording to the end. This function works from 1
minute after the start of the recording.
Using [TIME SLIP] ...
With [TIME SLIP], even if you leave your couch while
you are watching TV through this unit, you can come
back and watch rest of the program from right where
you left at any convenient time with just one button.
Please make sure to put VR mode DVD-RW disc, and set
the recording mode to LP, EP or SLP.
1)During recording, press [PLAY B].
Playback will start from the beginning of the program
that you are currently recording.
1)While viewing a TV broadcast via this unit, press
[TIME SLIP].
Screen for the current playback:
2)Press [TIME SLIP] again.
6/
6
1/
1
0:01:00 / 1:23:45
RW VR ORG
-
Playback will start from the point at which you press
[TIME SLIP] first while recording continues.
• While viewing the recorded content, you can pause
and resume the playback by pressing [TIME SLIP]
3)Press [STOP C] once to stop playback.
To stop recording, press [STOP C] again.
Resume ON
LP
1:01
To cancel the resume, press [STOP C] again.
If you play back the fast forward playback and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to
the normal playback.
• Playback image may freeze momentarily using this
function.
2)Press [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
However, this does not affect the recording.
• The 2x fast forward playback is not available.
[REC I] is not available during this function.
• You must cancel this function first by pressing
[STOP C] once. Then you can use [REC I] to use
OTR (one-touch timer recording) function or change
recording time for the OTR.
6
1
1:23:45
RW VR ORG
-
L1 (Rear)
• “Wait for a moment.” will be displayed on the screen
if you press [PLAY B] before 1 minute of recording.
This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
Resume ON
LP
1:01
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
EN 57
E7PEAUD_DR430KU_EN.indd 57
2009/12/14 18:33:15
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Simultaneous Playback and Recording
You can also play back a recorded title during current
recording or the timer recording on the same disc.
C] once to stop playback.
The resume message will appear.
Screen for the current recording:
1)During recording, press [DISPLAY].
Screen for the current recording:
3
1
1:30:25
RW VR ORG
-
L1 (Rear)
3
1
1:23:45
RW VR ORG
-
L1 (Rear)
Resume ON
LP
1:01
2)Select
The title number next to
{ / B], then press [ENTER].
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
will be highlighted.
Title:
Enter a desired title number to search using
[K / L] or [the Number buttons], then press
[ENTER].
Note
• Playback image may freeze momentarily using this
function.
Selected title playback will start.
However, this does not affect the recording.
• The 2x fast forward playback is not available.
Chapter:
To move to
This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
for chapter, press [B].
Enter a desired chapter number to search using
[K / L] or [the Number buttons], then press
[ENTER].
• Only the titles (chapters) in the original can be
selected.
You cannot select titles from the title list.
Selected chapter playback will start.
• When you stop the playback after the timer
recording is completed, the unit will be switched to
the timer standby mode if another program has been
set (refer to “Hints for Timer Recording” on page 41).
If you play back the currently recording program and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to the
normal playback.
E7PEAUD_DR430KU_EN.indd 58
2009/12/14 18:33:16
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title/Chapter Search
Track Search
Using [SKIP j ] / [SKIP i ]
Using [SKIP j ] / [SKIP i ]
1)During playback, press [SKIP i ] to skip the
1)During playback, press [SKIP i] to skip the
current title or chapter and move to the next.
current track/file and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [SKIP j ]
(For JPEG files, press it once to go to the previous file.)
To go back to the beginning of the current title or
chapter, press [SKIP j ]
Press it twice in quick successions to go to the previous
title or chapter. The title or chapter will move
backward one title at a time.
Press it twice in quick successions to go to the previous
track/file. The track/file will move backward one at a
Using [DISPLAY]
Using [DISPLAY]
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
e.g.) DVD-video
2)Use [{ / B] to select
e.g.) audio CD
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
0:00:15 / 0:05:00
CD
The number next to
3)Title:
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [ENTER].
will be highlighted.
e.g.) MP3 files
1/
5
0:00:15
MP3
Chapter:
The number next to
will be highlighted.
Press [B] to move to the number next to
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press
[ENTER].
for
3)Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[ENTER].
After the search, playback will start automatically.
After the search, playback will start automatically.
Note
• During CD playback, you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
total number
of titles
total time
of the title
total number
of chapters
EN 59
E7PEAUD_DR430KU_EN.indd 59
2009/12/14 18:33:18
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Time Search
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
will be highlighted.
To move to the number next to
, press [B]
When time search is not available,
counter are not displayed.
and time
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [ENTER].
After the search, playback will start automatically.
• Time search is available only in the same track, file or
title.
E7PEAUD_DR430KU_EN.indd 60
2009/12/14 18:33:20
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Repeat Playback
• Point B for the repeat A-B playback should be set
within the same title or track of point A.
Available repeat function may vary depending the discs.
1)During playback, press [DISPLAY] or [REPEAT] to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• If you press [REPEAT], skip to step 3.
• You cannot select “Group” during the random
playback of MP3/JPEG files.
• Chapter/Track repeat will be canceled whenever a
Chapter/Track is skipped forward or backward.
2)Use [{ / B] to select
menu.
to display the selection
• During the A-B repeat, if you reaches the point A
with any reverse playback, the reverse playback will
be canceled and the A-B repeat playback resumes
from point A.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired option to repeat,
then press [ENTER].
The selected repeat playback will start.
e.g.) DVD-video
OFF
Title
Chapter
A - B
You can play back a disc randomly instead of playing
back in the original order.
1)Press [SETUP] in stop mode.
2)Use [K / L] to select “DISC Playback Mode”, then
e.g.) audio CD
press [ENTER].
OFF
Track
All
“DISC Playback Mode” menu will appear.
For MP3, use [K / L] to select “Music”, then press
[ENTER]
A - B
For JPEG, use [K / L] to select “Photo”, then press
[ENTER]
e.g.) MP3/JPEG files
3)Use [K / L] to select “Random Play”, then press
OFF
Track
All
[ENTER].
Random playback will start.
e.g.) audio CD
Group
1/
5
0:00:15 / 0:05:00
CD
Title:
Random
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
display menu.
• For USB devices, select “Random Play”in
“USB Playback Mode”.
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER]
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
EN 61
E7PEAUD_DR430KU_EN.indd 61
2009/12/14 18:33:21
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Program Playback
Slide Show
You can program the disc to play back in your desired
You can select the display time between 5 seconds and
1)Press [SETUP] in stop mode.
1)Follow steps 1 and 2 in “Program Playback” on the
left.
2)Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
2)Use [K / L] to select “Photo”, then press [ENTER].
3)Use [K / L] to select “Slide Show”, then press
[ENTER].
3)Use [K / L] to select “Program Play”, then press
[ENTER].
4)Use [K / L] to select the display time, then press
[ENTER].
4)Use [K / L] to select a desired track, then press
[ENTER] or [B].
DISC Playback Mode
Program Play
5)Press [SETUP] to exit.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
• Large-size JPEG files take a few moments to be
displayed.
• For USB devices, select “Slide Show” in
“USB Playback Mode”.
Total 0:00:00
Repeat this step until you program all the desired
tracks.
5)Press [PLAY B].
DISC Playback Mode
Program Play
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:31:07
Program playback will start.
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.
E7PEAUD_DR430KU_EN.indd 62
2009/12/14 18:33:23
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in one or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages during playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back audio CD, you can switch “L/R”(stereo),
“L”(left) or “R”(right).
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY] or [AUDIO ]to
bring up the display menu.
2)Use [{ / B] to select
to display the selection
menu
If the display menu is already shown, skip to step 2.
e.g.) DVD-video
• If you press [AUDIO ], skip to step3.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{ / B] to select
menu.
to display the selection
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [ENTER].
3)Use [K / L] to select a desired subtitle language,
For DVD-video or VR mode DVD-RW
• Audio soundtrack will switch.
e.g.) DVD-video
then press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
1.English
1.Dolby Digital 2ch English
2.Dolby Digital 5.1ch English
Subtitle will be displayed in the selected language.
When “OFF” is selected, subtitle will disappear.
If the title contains both main and sub audio, you can
further select “L“ (main), “R“ (sub), “L/R“ (mixed of
main and sub).
Note
For audio CD
• Some discs will only allow you to change the subtitle
from the disc menu. Press [MENU/LIST] or
[TOP MENU] to display the disc menu.
Audio channel will switch.
e.g.) audio CD
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 97.
1/
5
0:00:15 / 0:05:00
CD
1. L/R
2. L
3. R
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [MENU/LIST]
[TOP MENU] to display the disc menu.
E7PEAUD_DR430KU_EN.indd 63
2009/12/14 18:33:24
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from two or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{ / B] to select
menu.
to display the selection
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Angle icon appears when a switching camera angle is available.
Angle will switch each time you press [ENTER].
3)Use [K / L
then press [ENTER].
e.g.) DVD-video
• Angle icon does not appear on the TV screen if you
set “Angle Icon” to “OFF” in “Playback” menu.
Refer to page 86.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
OFF
: no effect
Type 1 :
Type 2 : emphasized effect
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
menu.
to display the selection
Note
e.g.) DVD-video
• Select “OFF” if sound is distorted.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
• The setting will be kept when the unit is turned off.
3)
K
L
to, select “Noise Reduction”, then press [ENTER]
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Noise Reduction OFF
Black Level OFF
4)Use [
K
L] to select a desired option, then press [ENTER]
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.
E7PEAUD_DR430KU_EN.indd 64
2009/12/14 18:33:26
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Adjusting Black Level
You can adjust the black level to control the brightness
of the picture in order to get a better picture.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
to display the selection
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select “Black Level”, then press
[ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Noise Reduction OFF
Black Level OFF
4)Use [K / L] to select “OFF” or “ON”, then press
[ENTER].
Your setting will be activated.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
ON
OFF : Shows the original picture as recorded.
ON
: Make the darker parts of the picture more
visible.
Note
• You can adjust black level setting only during
playback.
• The setting will be kept even when the unit is turned
off.
• The default setting is “ON”.
E7PEAUD_DR430KU_EN.indd 65
2009/12/14 18:33:29
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DISC EDITING
Guide to a Title List
Editing Discs
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
You will find editing discs is easy. This unit offers
convenient edit functions which are possible only with
DVD-RW/-R and DVD+RW/+R.
You can edit the following from a title list.
• Assigning a name to a title
• Dividing a title
Press [TOP MENU].
4
5
6
Title List
ORG
JAN/ 7/10 1:00AM L1 LP
12:00AM (2:00:00) JAN/ 7/10
L1 LP
1
2
3
6
• Combining titles
• Adding titles to a playlist
• Erasing all playlist
4
5
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
1 / 2
3
2 1
3
(Possible editing functions depend on the recording
format and editing method.)
Edit
ORG
Original and playlist (VR mode)
For VR mode DVD-RW, you can edit the recordings in
playlist without changing the original recordings. Playlist
does not take up much disc space. After you make a
recording to VR mode DVD-RW, a playlist will be created
automatically.
Scene Delete
Edit Title Name
Chapter Mark
Protect
2
What “Original” or “Playlist” is for?
Throughout this manual, you will find original and playlist
which refer to the actual content and the edited version.
JAN/7/10 11:00PM L1 LP
0 : 00 : 59
11 10
9
8
7
Original content refers to what’s actually recorded on
the VR mode DVD-RW.
1. Title List of the titles recorded on the disc, and
For DVD+RW/+R, empty title always appears at the
For the titles being blocked by the V-chip system,
“BLOCK” will be displayed and you cannot watch the
contents.
Playlist content refers to the edited version of the VR
mode DVD-RW; how the original content is to be played
back.
Finalizing a disc
• This will allow a disc that is recorded on this unit to be
played back on other DVD player — without finalization
it will not be playable on other DVD player.
• After finalizing a DVD-RW/-R or DVD+R, you cannot edit
any information that is on that disc.
2. The protect icon: Appears when the title has been
protected. (Original titles only)
Indicating there is a previous / next page.
4. Title list icon: Indicates a type of the displayed title
• If you have recorded in DVD+RW, then editing is still
permitted after finalizing.
list.
: VR (Original)
: VR (Playlist)
5. Title name
: +VR mode
: Video mode
ORG
+VR
Using these editing functions to modify copyrighted
content for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the
United States and other countries, and may subject you
to civil and criminal liability.
PL
Video
Displays various information on
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time and the recording mode are
displayed here.
9. Progress bar: Indicating the progress of the playback.
The vertical lines in the bar indicates chapter marks,
and “L” sliding on the bar indicates current point of
playback displayed in the preview window.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [RETURN] to exit the title list.
E7PEAUD_DR430KU_EN.indd 66
2009/12/14 18:33:31
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING TITLES
Notes for deleting titles
After the disc is fully recorded:
DVD-RW/DVD+RW
DVD-R/DVD+R
• When a title is deleted from
• When the last title is deleted from
DVD-RW in video mode or DVD+RW, the
recordable space will be increased.
• When a title is deleted from
DVD-R and DVD+R, the
recordable space will NOT be
increased.
DVD-RW in VR mode, the
recordable disc space will
be increased.
The Full-Recorded disc
The Full-Recorded disc
The Full-Recorded disc
Delete!
Delete!
Delete!
Delete!
Deleted titles
cannot create
the space.
You cannot
record
a new title.
You cannot
record
a new title.
You can record
a new title.
You can record
a new title.
• If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.
• You cannot overwrite on the “Empty”
• For DVD+RW, if “Empty” appears right next to the other “Empty”, those “Empty” combines into one.
Title List
Title List
+VR
+VR
JAN/7/10 7:00AM L1 SLP
EMPTY TITLE
7:00AM (2:00:00)
JAN/7/10
SLP
1
2
5
3
6
1
4
2
3
1Delete
the title
No.5
4
Empty
Empty
Empty
1 / 1
1 / 1
EN 67
E7PEAUD_DR430KU_EN.indd 67
2009/12/14 18:33:32
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING TITLES
In stop mode, press [TOP MENU].
Title list, original or playlist will appear.
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
Be sure to read “Notes for deleting titles” on page 67
before you delete the title.
• For VR mode DVD-RW, press [MENU/LIST]
switch between “Original” and “Playlist”.
Use [K / L/s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
Title List
ORG
OPEN/
INPUT
JAN/ 7/10 1:00AM L1 LP
CLOSE SELECT
HDMI
1:00AM (2:00:00)
JAN/ 7/10
L1 LP
1
2
3
6
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
4
5
SATELLITE
LINK
PQRS
TUV
1 / 2
TIMER
PROG.
SPACE
Use [K / L] to select “Title Delete”,
then press [ENTER].
SETUP DISPLAY AUDIO
MENU/LIST
Play From Start
Edit
Title Delete
Add To Playlist
TOP MENU
ENTER
CLEAR
RETURN
Use [K / L] to select “Yes”, then press
[ENTER].
SKIP
REV
FWD
SKIP
Delete this title?
PAUSE
PLAY
STOP
Yes
No
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
After that, “Are you sure?” will appear, select
“Yes” and then press [ENTER]
Title will be deleted.
REPEAT REC MODE REC
ZOOM
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
SE-R0265
Writing to Disc
90%
This operation may take
awhile to be completed.
E7PEAUD_DR430KU_EN.indd 68
2009/12/14 18:33:33
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Follow the step 1 in “DELETING
TITLES” on page 68 to display the
original.
Playlist
wish.
You can add up to 99 titles to a playlist (as long as
the total number of the playlist does not exceed 999
chapters).
Use [K / L/s / B] to select the
desired title, then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “Add To
Playlist”, then press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Play From Start
Edit
Title Delete
Add To Playlist
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Use [K / L] to select “Yes”, then press
SETUP DISPLAY AUDIO
MENU/LIST
[ENTER].
Create a Playlist ?
TOP MENU
Yes
No
ENTER
The title is added to playlist.
CLEAR
RETURN
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
SKIP
REV
FWD
SKIP
This operation may take
awhile to be completed.
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
SE-R0265
• When a playlist contains 99 titles or more, or 999
chapters or more, “Add to Playlist” cannot be
selected.
EN 69
E7PEAUD_DR430KU_EN.indd 69
2009/12/14 18:33:35
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING/DELETING PLAYLIST
Erasing All Playlist
Press [SETUP].
Main menu will appear.
Playlist
Use [K / L] to select “DVD Menu”,
then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K L] to select “Delete All
Playlists”, then press [ENTER].
DVD Menu
SATELLITE
LINK
PQRS
TUV
Format
Finalize
Disc Protect OFF
ON
TIMER
PROG.
SPACE
Delete All Playlists
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Use [K L] to select “Yes”, then press
ENTER
[ENTER].
CLEAR
RETURN
Delete entire playlist?
SKIP
REV
FWD
SKIP
Yes
No
PAUSE
PLAY
STOP
“Are you sure?” will appear.
Use [K / L] to select “Yes” and then press
[ENTER].
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
DVD Menu
Format
Finalize
Disc Protect OF
Delete All Playl
Areyousure?
Yes
No
SE-R0265
Playlist is deleted.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Note
• Deleting a playlist will not increase the available
recording time on the disc.
E7PEAUD_DR430KU_EN.indd 70
2009/12/14 18:33:37
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles
You can put a name on the title and change it from this
menu.
Use [K / L] to select “Edit Title
Name”, then press [ENTER].
Edit
ORG
OPEN/
INPUT
CLOSE SELECT
HDMI
Scene Delete
1
Edit Title Name
Chapter Mark
Protect
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on page 72.
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Edit - Edit Title Name
ORG
A
a
B
b
2
!
C
c
3
?
1
character set
ENTER
1
@
CLEAR
RETURN
SKIP
REV
FWD
SKIP
M
1 : 25 : 47
PAUSE
PLAY
STOP
area for entering title names
When you finish entering a title name, press
[ENTER]
In stop mode, press [TOP MENU].
Title list, original or playlist will appear.
Use [K L] to select “Yes”, then press
[ENTER].
• For VR mode DVD-RW, press [MENU/LIST] to
switch between “Original” and “Playlist”.
Edit - Edit Title Name
ORG
Use [K Ls B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
Yes
1
No
Title List
ORG
JAN/ 7/10 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 7/10
L1 LP
MY FAVORITE
1
2
3
6
1 : 25 : 47
The name you entered will be activated for the title.
4
5
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
1 / 2
Use [K L] to select “Edit”, then press
[ENTER].
This operation may take
awhile to be completed.
Play From Start
Edit
Title Delete
Add To Playlist
E7PEAUD_DR430KU_EN.indd 71
2009/12/14 18:33:38
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles (cont’d)
1)Use [K / L] to select a desired character set, then
press [ENTER].
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Select
ABC
abc
123
@ ! ?
Press
<space>
<space>
<space>
0
SATELLITE
LINK
PQRS
TUV
! ”# $ % & ’( )
+ , - . / : ; < = >
*
(*1)
(*1)
1
TIMER
PROG.
SPACE
? @ [ ] ^ _ { | }
SETUP DISPLAY AUDIO
MENU/LIST
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
TOP MENU
GHI
ghi
ENTER
JKL
jkl
CLEAR
RETURN
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
wxyz
REPEAT REC MODE REC
ZOOM
*1 Press
, character set will be changed to the “ @!? ”
to to go back to
mode automatically. Press
the previous character set.
• To delete letters, press [CLEAR] repeatedly.
Press and hold [CLEAR] to delete all letters.
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.
SE-R0265
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
E7PEAUD_DR430KU_EN.indd 72
2009/12/14 18:33:40
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Chapter Marks
Follow steps 1 to 3 in “Putting Names
on Titles” on page 71 to display “Edit”
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Submenu will appear.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the point where
you will create a new chapter mark.
Or, use [SKIP H / G] to find a
chapter mark that you wish to delete.
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
Use [K / L] to select “Add” or
“Delete”, then press [ENTER].
e.g.) VR mode DVD-RW original
TOP MENU
Edit - Chapter Mark
ORG
ENTER
Add
1
Delete
CLEAR
RETURN
Chapter
2 / 3
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Use [K / L] to select “Yes”, then press
REPEAT REC MODE REC
ZOOM
[ENTER].
If you select “Add” at step 4, a new chapter mark
will be added, and if you select “Delete” at step
4, the chapter mark will be deleted.
e.g.) Add
SE-R0265
Edit - Chapter Mark - Add
ORG
Yes
1
No
Chapter
2 / 3
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
A new chapter mark will be added.
Press [RETURN].
• Maximum numbers of chapter for each DVD:
VR mode DVD : 999 chapters per entire original
and playlist
+VR mode DVD : 254 chapters per disc, 99 chapters
per title
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
Press [RETURN] again and then
[RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
E7PEAUD_DR430KU_EN.indd 73
2009/12/14 18:33:42
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Hiding Chapters
Use [K Ls B] to select a desired
title, then press [ENTER].
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Title List
+VR
JAN/ 7/10 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 7/10
L1 LP
1
2
3
6
OPEN/
INPUT
CLOSE SELECT
HDMI
4
5
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
1 / 2
SATELLITE
LINK
PQRS
TUV
Use [K / L] to select “Edit”, then
press [ENTER].
TIMER
PROG.
SPACE
Play From Start
Edit
Title Delete
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Use [K L] to select “Hide Chapter”,
then press [ENTER].
Submenu will appear.
ENTER
CLEAR
RETURN
SKIP
REV
FWD
SKIP
Use [SKIP H] or [SKIP G] to decide
the chapter to be hidden.
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Use [K / L] to select “Hidden”, then
press [ENTER].
REPEAT REC MODE REC
ZOOM
Edit - Hide Chapter
+VR
Visible
1
Hidden
Chapter 2 / 3 Hidden
JAN/7/10 1:00AM L1 LP
1 : 25 : 47
In stop mode, press [TOP MENU].
Title list will appear.
After this operation is completed,
press [RETURN] thrice to exit.
Note
Data will be written onto the disc momentarily.
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
This operation may take
awhile to be completed.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
Title List
+VR
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible”, then press [ENTER]
at the step 6 above.
JAN/ 7/10 1:00AM L1 LP
--:-- (2:00:00)
Hidden
---/--/--
2
LP
1
4
3
Data will be written onto the disc momentarily.
Empty
1 / 1
E7PEAUD_DR430KU_EN.indd 74
2009/12/14 18:33:44
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting a Part of a Title
You can delete a specific part of a title.
Even when parts of title are deleted from the playlist, the
original title will remain as it is.
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 71 to
display “Edit” menu.
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “Scene Delete”,
then press [ENTER].
e.g.) VR mode DVD-RW playlist.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Edit
PL
Scene Delete
1
SATELLITE
LINK
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
PQRS
TUV
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
TOP MENU
Instructions continue on the next page.
ENTER
CLEAR
RETURN
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
SE-R0265
Note
• When a scene is deleted from an original, the playlist
related to the original will be deleted.
• You cannot select “Scene Delete” if the number of
chapter marks in the original or playlist is more than
999. (Depends on the content, there is a case that
you cannot select “Scene Delete” before the number
of chapter marks reaches 999.)
• The recordable disc space will not increase even after
deleting a part of a title on the playlist.
E7PEAUD_DR430KU_EN.indd 75
2009/12/14 18:33:45
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting a Part of a Title (cont’d)
Use [K L] to select “Delete” then
press [ENTER].
Use [SKIP H G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the start point,
then press [ENTER].
Edit - Scene Delete
PL
Start
1
End
Preview
Delete
Edit - Scene Delete
PL
Start
1
End
Preview
Delete
JAN/ 7/10 1:00AM L1 LP
1 : 47 : 00
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
Use [K / L] to select “Yes” then press
[ENTER].
Then use [SKIP H / G],
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER]
[REV E], [FWD D], [PLAY B] and
[PAUSE F] again to move to the end
point, and press [ENTER].
Edit - Scene Delete
PL
Are you sure?
1
Yes
No
Edit - Scene Delete
PL
Start
1
End
Preview
Delete
JAN/ 7/10 1:00AM L1 LP
1 : 50 : 00
The part of the title is deleted.
JAN/ 7/10 1:00AM L1 LP
1 : 45 : 00
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
The cursor will move to “Preview”.
total and the elapsed time of the title, and the
You can check the preview by pressing [ENTER]
• Before and after 5 seconds of the deleted point
will be playback for preview.
This operation may take
awhile to be completed.
start point end point
Before
editing
Edited
E7PEAUD_DR430KU_EN.indd 76
2009/12/14 18:33:46
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Dividing a Title
Playlist
Use [K L] to select “Edit”, then
press [ENTER].
e.g.) VR mode DVD-RW playlist
You can divide one title into two new titles.
Play From Start
Edit
Title Delete
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [SKIP H], [SKIP G], [REV E],
[FWD D], [PAUSE F] and [PLAY B]
to decide the point at which you will
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Use [K / L] to select “Title Dividing”,
then press [ENTER].
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Use [K L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW playlist
ENTER
CLEAR
RETURN
Edit - Title Dividing
PL
SKIP
REV
FWD
SKIP
Yes
1
No
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
REPEAT REC MODE REC
ZOOM
The title will be divided into two new titles.
Both title names are identical.
For DVD+RW: Data will be written onto the disc
momentarily.
Writing to Disc
90%
This operation may take
awhile to be completed.
In stop mode, press [TOP MENU].
• For VR mode DVD-RW, press [MENU/LIST] to
select “Playlist”.
For VR mode DVD-RW: Proceed to step 7.
Press [RETURN] or [STOP C] to exit.
Use [K / L/s / B] to select a desired
title, then press [ENTER].
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
99 (-RW) or 49 (+RW), and the number of recording
chapters reaches the maximum of 999 (-RW) or 254
(+RW).
E7PEAUD_DR430KU_EN.indd 77
2009/12/14 18:33:48
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Combining Titles
Follow the steps 1 to 3 in “Dividing a
Playlist
Title” on page 77 to display “Edit”
Use [K / L] to select “Title
Combining”, then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Edit
PL
Scene Delete
1
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
SATELLITE
LINK
PQRS
TUV
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
TIMER
PROG.
SPACE
Title combining setting window will appear.
Selected title grays out, and the frame of the
next title becomes yellow.
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Edit - Title Combining
PL
JAN/ 7/10 11:00PM L1 LP
11:00PM (0:30:00)
JAN/ 7/10
L1 LP
1
2
3
6
ENTER
1 +
CLEAR
RETURN
4
5
SKIP
REV
FWD
SKIP
1 / 6
PAUSE
PLAY
STOP
Use [K / L / { / B] to select another
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
title to combine, then press [ENTER].
Selection menu will appear.
REPEAT REC MODE REC
ZOOM
Use [K / L] to select “Yes”, then press
[ENTER].
Combine selected titles?
Yes
No
SE-R0265
The two titles will combine into a single title.
Title List
PL
JAN/ 7/10 12:00AM L1 LP
12:00AM (2:30:00) JAN/ 7/10
L1 LP
1
2
3
6
4
5
1 / 6
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Note
• You cannot select the same title twice and combine
it into a single title.
• If either one of the two original titles is deleted, the
combined new title is also deleted.
E7PEAUD_DR430KU_EN.indd 78
2009/12/14 18:33:49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Releasing the Title Protection
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 71 to
display “Edit” menu.
Original
To prevent the accidental editing, or erasing of the titles,
you can protect them in “Edit” menu.
You can cancel the title protection feature after it is
applied.
Use [K / L] to select “Protect”, then
press [ENTER].
Edit
ORG
OPEN/
INPUT
Scene Delete
1
CLOSE SELECT
HDMI
Edit Title Name
Chapter Mark
Protect
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
SATELLITE
LINK
PQRS
TUV
• If the title is protected,
the original list.
icon will appear in
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
Confirm the indication
“OFF ON”. Press [ENTER] again.
• If the title is already protected, “ON OFF” will
appear. If you press [ENTER], the title will be
released from protection.
TOP MENU
ENTER
Edit - Protect
ORG
CLEAR
RETURN
OFF
ON
1
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
JAN/ 7/10 1:00AM L1 LP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
1 : 25 : 47
•
icon will appear on the title in the original
REPEAT REC MODE REC
ZOOM
list.
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
SE-R0265
This operation may take
awhile to be completed.
To protect a whole disc
(VR mode DVD-RW, DVD+RW/+R
only):
Select “Disc Protect OFF ON” from the DVD
Menu, then select “Yes”.
Refer to “SETTING A DISC TO PROTECT” on
page 29.
E7PEAUD_DR430KU_EN.indd 79
2009/12/14 18:33:51
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Clearing All Chapter Marks at Once
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 71 to
display “Edit” menu.
For titles in video mode DVD-RW, you can set or edit
chapter at every time interval. You can clear the chapter
mark too.
You can specify the interval of chapter marks for titles last
more than 5 minutes.
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Edit
Video
OPEN/
INPUT
CLOSE SELECT
HDMI
Edit Title Name
1
Chapter Mark
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
Use [K / L] to select the desired
interval, then press [ENTER].
SETUP DISPLAY AUDIO
MENU/LIST
Edit - Chapter Mark
Video
TOP MENU
OFF
1
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
ENTER
CLEAR
RETURN
JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
Use [K / L] to select “Yes”, then press
[ENTER].
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Chapter marks are added.
If you select “OFF” at step 3, all the chapter
marks are erased.
REPEAT REC MODE REC
ZOOM
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
SE-R0265
This operation may take
awhile to be completed.
Note
• You cannot select a chapter mark interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter mark may be delayed depending on the
recording content.
• Maximum number of chapter for video mode DVD is
99 chapters per title.
• The interval for auto chapter may be up to two
minutes different from the time option you set.
E7PEAUD_DR430KU_EN.indd 80
2009/12/14 18:33:53
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
Playback
Items (highlight is the default)
Parental Lock
page 84
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to
1 [Kid Safe]
Audio Out Dynamic Range Control
page 85
Compressing the range of sound volume.
ON
OFF
PCM
Set whether the sound recorded in 96kHz will be
down sampled to 48kHz.
48kHz
96kHz
PCM
Dolby Digital
DTS
Set the type of sound signal which outputs from
the digital audio output jack.
Stream
Set whether DTS signal is output or not.
ON
OFF
Disc Menu Language
page 86
Set the language for disc menu language.
English
French
Spanish
Other
Audio Language
page 86
Set the language for audio.
Original
English
French
Spanish
Other
Subtitle Language
page 86
Set the language for subtitles.
OFF
English
French
Spanish
Other
Angle Icon
Set whether to display the angle icon or not.
Set the type of still image in pausing playback.
ON
OFF
page 86
Still Mode
page 86
Auto
Field
Frame
Display
OSD Language
Set the language for OSD (on-screen display).
Set the idling time before the screen saver starts.
English
Français
Español
OFF
1 minute
5 minutes
page 87
Screen Saver
page 87
10minutes
15 minutes
Auto
FL Dimmer
page 87
Set the brightness of the front panel display.
Bright
Dark
V-Chip
MPAA Rating
page 88
X
Set the viewing limitation according to US movie
ratings.
NC-17
R
PG-13
PG
G
NR
TV Rating
page 88
TV-MA
TV-14
TV-PG
TV-G
Set the viewing limitation according to US TV
program ratings.
TV-Y7
TV-Y
None
Canadian English Rating 18+
Set the viewing limitation according to Canadian
English language ratings.
page 88
14+
PG
G
C8+
C
E
EN 81
E7PEAUD_DR430KU_EN.indd 81
2009/12/14 18:33:54
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
Setup
Display
Items (highlight is the default)
V-Chip
Contents
Canadian French Rating 18ans+
Set the viewing limitation according to Canadian
French language ratings.
page 88
16ans+
13ans+
8ans+
G
E
Change Password
page 88
Change the password.
Video
Progressive
page 89
ON
OFF
Set to the progressive scan mode (set to "ON") or
to the interlace scan mode (set to "OFF").
TV Aspect
page 89
4:3 Letter Box
4:3 Pan & Scan
Set a picture size according to aspect ratio of your
TV.
16:9 Wide
Select Video - L1(Rear)
Set the video input type for the external input.
Insert chapter marks at even time interval.
Video In
S-Video In
OFF
5 minutes
page 26
Recording
Auto Chapter
page 34
10minutes
15 minutes
30 minutes
60 minutes
Recording Audio Select (XP)
page 35
PCM
Dolby Digital
Set the recording audio type. (Only when the rec
mode is set to XP.)
Auto
Finalize
page 30
Disc Full
ON
OFF
ON
Set the unit to finalize the disc automatically.
End of Timer Rec
OFF
Aspect Ratio (Video mode)
page 35
Auto
4:3
16:9
Set a aspect ratio for video mode recording.
Make Recording Compatible
page 34
ON
OFF
Set to prohibit additional recording (OFF) or to
replace the title list after recording (ON).
Clock
HDMI
Set the clock.
Set the color space for the HDMI output.
Clock Setting page 25
Format
page 90
RGB
YCbCr
HDMI Audio
page 91
Set whether to output the HDMI audio signal or
not.
ON
OFF
RGB Range
page 91
Set the black-white contrast level for HDMI RGB
output.
Normal
Enhanced
HDMI CEC
page 91
ON
OFF
Set whether to utilize the HDMI-CEC function. The
HDMI-CEC function allows all components
connected via HDMI cable to act in conjunction
with this unit.
Reset All
page 92
Yes
No
Set to the default setting.
Note
• Your change to each setting stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
E7PEAUD_DR430KU_EN.indd 82
2009/12/14 18:33:55
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback
Press [SETUP] and use [K L] to
select “General Setting“, then press
[ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K L] to select “Playback”, then
press [ENTER].
SATELLITE
LINK
PQRS
TUV
General Setting
TIMER
PROG.
Playback
Display
Video
Recording
Clock
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
HDMI
Reset All
TOP MENU
ENTER
CLEAR
RETURN
Use [K / L] to select a desired item,
then press [ENTER].
SKIP
REV
FWD
SKIP
Parental Lock
Audio Out
1
2
3
4
5
6
7
PAUSE
PLAY
STOP
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Still Mode
REPEAT REC MODE REC
ZOOM
Submenu will appear.
Refer
set the selected item.
to
on pages 84 to 86 and
SE-R0265
When you finish with the setting,
press [SETUP] to exit.
E7PEAUD_DR430KU_EN.indd 83
2009/12/14 18:33:55
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback (cont’d)
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select the desired level, then press
[ENTER].
Use [K / L] to select “Yes”, then press [ENTER]. Use
[the Number buttons] to enter a new password except
for 4737, then press [ENTER].
Change Password?
Password Input
Yes
No
Yes
Your setting will be activated.
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
• Use [the Number buttons] to enter the current
password.
5 [PG R]
4 [PG 13]
3 [PG]
Password Input
2 [G]
1 [Kid Safe]
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes” then press [ENTER]. Use [the Number buttons]
to enter a new password except for 4737, then press
[ENTER].
If a password has not been set yet, proceed to
If a password has been set already, proceed to
<change the password>
• OFF : Parental Control is inactive; all discs can play.
• 8 [Adult]: DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC 17]: No one under 17 admitted.
Change Password?
Password Input
Yes
No
Your setting will be activated.
• 6 [R]: Restricted; under 17 requires accompanying
parent or adult guardian.
• 5 [PG R]: Parental Guidance Recommended.
• 4 [PG13]: Unsuitable for children under 13.
• 3 [PG]: Parental Guidance suggested.
• 2 [G]: General Audience.
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4737 using
[the Number buttons] in password input window.
Password will be cleared and parental levels will be
set to “OFF”.
• 1 [Kid Safe]: Suitable for children.
• Parental lock function may not be available to some
discs.
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
E7PEAUD_DR430KU_EN.indd 84
2009/12/14 18:33:56
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback (cont’d)
Choose the appropriate audio setting for your external device.
Use [K / L] to select a setting, then press [ENTER].
It will only affect a disc playback.
Dolby Digital
Use [
K
/
L] to select a desired item, then press [ENTER]
PCM
Stream
Audio Out
Your setting will be activated.
A
Dynamic Range Control
PCM
Dolby Digital
DTS
B
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
C
D
compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Set to “ON” to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [ENTER].
Dynamic Range Control
Select a setting using [K / L], then press [ENTER].
ON
OFF
DTS
ON
OFF
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
ON
: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS®, set to “ON”.
OFF
: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS®, set to “OFF”.
Use [K / L] to select a setting, then press [ENTER].
PCM
48kHz
96kHz
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Note
When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
E7PEAUD_DR430KU_EN.indd 85
2009/12/14 18:33:58
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback (cont’d)
Set the language for disc menu.
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a language, then press [ENTER].
Use [K / L] to select a setting, then press [ENTER].
Disc Menu Language
Angle Icon
English
French
Spanish
Other
ON
OFF
Your setting will be activated.
Select “Auto” usually.
Use [K / L] to select a setting, then press [ENTER].
Set the audio language.
Use [K / L] to select a language, then press [ENTER].
Still Mode
Auto
Audio Language
Field
Frame
Original
English
French
Spanish
Other
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC video).
Set the subtitle language.
Use [K / L] to select a language, then press [ENTER].
Subtitle Language
OFF
English
French
Spanish
Other
Your setting will be activated.
If “Other” is selected for
using [the Number buttons]
, press 4-digit code
Code Input
-
-
-
-
Refer to the language code table on page 98.
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] to erase numbers entered incorrectly.
E7PEAUD_DR430KU_EN.indd 86
2009/12/14 18:34:00
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Display
Set the language for the on-screen display.
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select a language, then press [ENTER].
OSD Language
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
English
Français
Español
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
Set the time to activate the screen saver function on the
Use [K / L] to select a setting, then press [ENTER].
TOP MENU
Screen Saver
OFF
ENTER
1 minute
5 minutes
10 minutes
15 minutes
CLEAR
RETURN
SKIP
REV
FWD
SKIP
Your setting will be activated.
PAUSE
PLAY
STOP
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
Set the front panel display brightness.
Use [K / L] to select a setting, then press [ENTER].
REPEAT REC MODE REC
ZOOM
FL Dimmer
Auto
Bright
Dark
SE-R0265
If “Auto” is selected, the display gets dark when the
power is off.
V-Chip
Press [SETUP] and use [K / L] to
With the V-chip system in this unit, you can set the
viewing limitation for the analog TV programs received
from the external tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view the program.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the
Number buttons] to set the access password, then
press [ENTER]. The number you entered will be stored
as the access password.
select “General Setting”, then press
[ENTER].
Use [K / L] to select “Display”, then
press [ENTER].
Use [K / L] to select a desired item,
then press [ENTER].
OSD Language
Screen Saver
FL Dimmer
V-Chip
1
2
3
4
Password Input
Submenu will appear.
Press [SETUP] to exit.
EN 87
E7PEAUD_DR430KU_EN.indd 87
2009/12/14 18:34:02
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
[Canadian English Rating]
Rating
2) Use [K / L] to select a desired item, then press
[ENTER].
Category
V-Chip
18+
14+
PG
G
Adult audience only
higher
lower
A
B
C
D
E
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Change Password
Unsuitable for ages under 14
Parental guidance suggested
General audience
C8+
C
For children over 8
For all children
E
Exempt program
[Canadian French Rating]
Rating
Category
18ans+
16ans+
13ans+
8ans+
G
Adult audience only
higher
lower
Unsuitable for ages under 16
Unsuitable for ages under 13
Unsuitable for ages under 8
General audience
You can set the viewing limitation according to
MPAA rating (US movie ratings),
TV Rating (US TV program ratings),
Canadian English Rating (Canadian English language ratings)
Canadian French Rating (Canadian French language ratings)
E
Exempt program
1) Use [K / L] to select the desired rating, then press
[ENTER] repeatedly to switch between view and
block. When it is blocked a key icon will appear.
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K / L/ { / B] to select
the desired rating or sub rating, then press [ENTER]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
e.g.) MPAA rating
MPAA Rating
X
NC-17
R
TV Rating
FV
V
S
L
D
PG-13
PG
G
TV-MA
TV-14
TV-PG
TV-G
NR
TV-Y7
TV-Y
[MPAA Rating]
None
Rating
Category
Mature audience only
Sub Rating
Category
Fantasy Violence
Rating
TV-Y7
X
higher
FV
V
NC-17
No one under 17 admitted
Violence
TV-PG
TV-14
TV-MA
Restricted; under 17 requires
accompanying parent or adult guardian
R
S
Sexual Situation
Coarse Language
Suggestive Dialogue
L
PG-13
PG
Unsuitable for children under 13
Parental guidance suggested
General audience
D
TV-PG, TV-14
G
lower
Note
NR
No rating
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).
[TV Rating]
Rating
TV-MA
TV-14
TV-PG
TV-G
Category
Mature audience only
higher
Unsuitable for children under 14
Parental guidance suggested
General audience
Change the current password.
TV-Y7
TV-Y
Appropriate for all children 7 and older
Appropriate for all children
No rating
Use [the Number Buttons] to enter new access
password.
lower
None
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forgot the access password, enter 4737
using [the Number buttons] in password input
E7PEAUD_DR430KU_EN.indd 88
2009/12/14 18:34:04
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Video
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
1) Use [K / L] to select “ON“, then press [ENTER].
Progressive
SATELLITE
LINK
ON
PQRS
TUV
OFF
TIMER
PROG.
SPACE
{ / B] to select “Yes“, then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate?
Yes
No
ENTER
CLEAR
RETURN
K / L] to select “Yes“ within 15 seconds, then
press [ENTER].
Your setting will be activated.
SKIP
REV
FWD
SKIP
Note
PAUSE
PLAY
STOP
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to pages 19-20.) If not, use the RCA video cable
and set the progressive scan to “OFF”.
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The “Progressive” setting will be “OFF”.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Use [K / L] to select “Video”, then
press [ENTER].
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
Use [K / L] to select a desired item,
then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
1
2
3
Progressive
TV Aspect
Select Video
If you have a standard TV:
Submenu will appear.
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
Refer
on this page and set
• For
refer to “SETTINGS FOR THE VIDEO
INPUT“ on page 26.
When you finish with the setting,
press [SETUP] to exit.
EN 89
E7PEAUD_DR430KU_EN.indd 89
2009/12/14 18:34:05
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
HDMI
Press [SETUP] in stop mode and use
[K L] to select “General Setting”,
then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “HDMI”, then
press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
General Setting
Playback
Display
Video
Recording
Clock
SATELLITE
LINK
PQRS
TUV
TIMER
PROG.
HDMI
Reset All
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.
ENTER
CLEAR
RETURN
Use [K L] to select a desired item,
then press [ENTER].
SKIP
REV
FWD
SKIP
Format
1
2
3
4
PAUSE
PLAY
STOP
HDMI Audio
RGB Range
HDMI CEC
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
HDMI cable is not connected (the items will be
shown in grey).
through
when an
When you finish with the setting,
press [SETUP] to exit.
SE-R0265
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
RGB
YCbCr
E7PEAUD_DR430KU_EN.indd 90
2009/12/14 18:34:07
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
HDMI (cont’d)
Functions available for the HDMI-CEC
• One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically turned on and switch to appropriate input
Buttons for one touch play:
[TIMER PROG.], [SETUP], [INPUT SELECT ],
[PLAY B], [TOP MENU], [MENU/LIST]
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [ENTER].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
• System information
ON
Get & Set Menu Language: This unit recognizes the
OSD language set for the TV and automatically set the
same language as the player menu language (OSD
menu language) for this unit.
Power off: When you turn the TV off, this unit and all
equipment connected via HDMI will automatically turns
off except during recording on the unit.
Receiving operational signal from TV’s remote
control: You can operate this unit with TV’s remote
control. Check your TV owner’s manual for details.
OFF
Your setting will be activated.
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [ENTER].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
RGB Range
• This function may not work properly depending on the TV
you are connecting.
Normal
Enhanced
• The available operation may differ depends on the TV’s
remote control you use.
Your setting will be activated.
• Other components must be compatible with HDMI-CEC in
order to use this function.
You can control all HDMI-CEC compatible components
connected via HDMI cable by simple button operations of
remote control of this unit.
In order to enable the function you need to set “HDMI
CEC” to “ON”.
Use [K / L] to select a setting, then press [ENTER].
HDMI CEC
ON
OFF
EN 91
E7PEAUD_DR430KU_EN.indd 91
2009/12/14 18:34:08
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Reset All
Reset the setting to default.
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K L] to select “Reset All”, then
press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
General Setting
Playback
Display
Video
Recording
Clock
SATELLITE
LINK
PQRS
TUV
HDMI
Reset All
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
MENU/LIST
TOP MENU
Select “Yes” using [K L] , then press
[ENTER].
ENTER
CLEAR
RETURN
Reset to factory default?
Yes
No
SKIP
REV
FWD
SKIP
PAUSE
PLAY
STOP
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER]
Your setting will be initialized.
TIME SLIP
1.3x / 0.8x PLAY INSTANT SKIP
REPEAT REC MODE REC
ZOOM
SE-R0265
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- OSD language setting
- Parental lock setting
- V-chip setting
- Timer programs
E7PEAUD_DR430KU_EN.indd 92
2009/12/14 18:34:10
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
Power
The power does not turn on.
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
Picture
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• If the main menu appears on the TV screen, press [RETURN]
• Check the connection to your TV (pages 18-21).
• Check if the progressive scan mode is set correctly according to your TV
(page 90).
• Switch the input selector on your TV (such as to “L1”) so that the signal from
the unit appears on the TV screen.
Picture noise appears.
• Clean the disc with a cleaning cloth.
TV program pictures are
distorted.
• Check if all the connections are made correctly (page 18).
Playback picture is distorted.
• Keep the device which may cause electrical disturbances, such as a cellular
phone away.
Playback picture or TV program
from the device connected
through the unit is distorted.
• If the playback picture output from a DVD player, VCR or tuner goes through
the unit before reaching your TV, the copy-protection signal applied to some
programs could affect picture quality. Disconnect the playback device in
question and connect it directly to your TV.
Cannot record a TV program.
• This unit does not have a tuner to receive TV broadcasting.
• You must connect this unit to an external tuner to record TV programs
(page 18).
Sound
There is no sound.
• Clean the disc with a cleaning cloth.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• The input device setting on the amplifier is incorrect.
• The unit is in pause mode or in slow-motion playback mode.
• The unit is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL AUDIO OUTPUT
(COAXIAL) jack, check the setting in “Audio Out” (page 85).
No DTS sound on digital output.
• Change the setting menu for DTS® to ON.
No DTS sound from analog
output
• This unit has no analog sound output when playing back the selected DTS
sound mode.
Sound is noisy.
• Clean the disc with a cleaning cloth.
Remote control
The remote control does not
• The remote control is not pointed at the infrared sensor window on the unit.
Playback
The disc does not play back.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 10).
• The region code on the DVD-video does not match the unit (page 10).
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back the
disc if it was not finalized.
Playback image freezes for a
second.
• During the playback of 2 layered disc, picture may freeze for a moment when
the 1st layer switches to the 2nd layer. This is not a malfunction.
E7PEAUD_DR430KU_EN.indd 93
2009/12/14 18:34:10
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
Playback
The disc does not start playback
from the beginning.
• Resume playback was activated (page 54). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
The unit starts playing back the
disc automatically.
• The DVD-video features an auto playback function.
Some functions such as stop,
search, or slow-motion playback
cannot be performed.
• Depending on the disc, you may not be able to do some of the operations.
Refer to the instruction manual supplied with the disc.
The language for the sound track • The titles does not have the multilingual audio tracks.
cannot be changed.
• The DVD-video prohibits the changing of the language for the sound track.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-video.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc contains
a multi-angle portion. Actual change will be performed when the portion has
come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording / Timer recording / Editing
External input position (L1/L2)
cannot be changed while
recording.
• This unit is designed so. This is not a malfunction.
Nothing was recorded even
though you set the timer setting
correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for more
than 30 seconds. Reset the clock (page 25).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Recording does not stop
immediately after you press
[STOP C]
• It will take a few seconds for the unit to input disc data before recording
stops.
Timer recording is not complete
or did not start from the
beginning.
• The timer setting overlapped with another setting that has priority (page 41).
• Disc space was not enough.
• “Make Recording Compatible“ is not set to “ON”, when recording onto
DVD+RW/+R that was recorded on other unit.
DV signal cannot be input.
• Before connection, turn on the power supplies for both this unit and the DVC,
and make sure that these units are in stop mode.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other types of
signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC with
another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply for
the unit and re-connect the DVC.
The DVC cannot be operated
with this unit.
• Signal input or DVC operation from this unit may be disabled depending on
the type of DVC.
• If a DVC signal cannot be input, use an external input (L1 (Rear)/L2 (Front)) for
analog connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a mode
other than camera mode. In this case, switch to DVD control and execute the
normal recording procedure while operating the DVC.
Certain functions of the unit
cannot operate.
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow playback
function is disabled.
• With L3 (DV-IN), the disc display menu does not appear unless disc playback
is executed.
DV audio signal cannot be
switched.
• For recording with the DVC, the recording audio signal can be set to 12 bits
or 16 bits. However, when 16-bit recording mode is selected, audio signal
cannot be switched. To record an audio signal, set it to 12 bits.
E7PEAUD_DR430KU_EN.indd 94
2009/12/14 18:34:11
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
No image from HDMI connection. • Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
• If the unit is connected to the unauthorized display device with an HDMI
cable, the audio/video signal may not be output when playing back a
commercial DVD-video.
• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI conversion
cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
The unit does not operate
properly.
• When static electricity, etc., causes the unit to operate abnormally, unplug
the unit and then plug it in again.
The disc tray does not open when • It may take a few seconds for the disc tray to open after you have recorded or
you press [OPEN/CLOSE A]
edited a disc. This is because the unit is adding disc data to the disc.
“Repairing” appears on the TV
screen.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing process
will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
Repairing
In case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [A OPEN/CLOSE]
on the front panel, then select “Yes” and press [ENTER]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Do you want to cancel a repairing
process ? When selecting “Yes”,
the disc may not be usable.
Yes
No
Repairing
Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which have
— Please eject the disc. —
Playback feature may not be available on this disc.
the marks on pages 9-10.
Insert the disc with the labeled side facing up.
Unknown USB Device/File
— Please Remove the USB. —
Insert a compatible USB device.
• Format of the files in the connected
USB device are not supported.
• Incompatible USB device is connected.
• Insert a compatible USB device with
supported file format. If this does not
solve the problem, use other type of
compatible USB device.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 84).
Recording Error
This program is not allowed to be recorded.
• You are trying to record the copy
prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in Video
mode.
• You are trying to record the copy-once
program onto the DVD-RW disc in video
mode.
• Set “Format Mode” to “VR mode” (page
27).
Recording Error
This program is not recordable in +VR mode.
• You are trying to record the copy-once
program.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
E7PEAUD_DR430KU_EN.indd 95
2009/12/14 18:34:11
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Error message
Cause
Solution
Recording Error
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• The disc is dirty.
• The disc is damaged.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 9).
• Clean the disc with a cleaning cloth.
• Replace the disc.
Cannot record on this disc.
Recording Error
This program is not allowed to be
recorded on this disc.
• You are trying to record the copy-once
program onto the DVD-RW disc which
is not compatible with CPRM.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
Recording Error
This disc is protected and not recordable.
You are trying to record on to the protected
disc which is set in “DVD Menu” menu.
• Release the disc protect setting in “DVD
Menu” menu (page 29).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
(The maximum is 99)
You are trying to record onto the DVD-RW/-R • Delete unnecessary titles (pages 67-68).
on which the number of recording titles
comes up to the maximum (99).
Recording Error
You cannot record more than 999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the VR mode
DVD-RW on which the number of recording
chapters comes up to the maximum (999).
• Delete unnecessary chapter marks
(page 73).
Recording Error
(The maximum is 49)
You are trying to record onto the DVD+RW/+R • Delete unnecessary titles (pages 67-68).
on which the number of recording titles
comes up to the maximum (49).
Recording Error
You cannot record more than 254 chapters on one disc.
(The maximum is 254)
You are trying to record onto the DVD+RW
on which the number of recording
chapters comes up to the maximum (254).
• Delete unnecessary chapter marks
(page 73).
Recording Error
You cannot record on this disc as Control
Information is full.
This disc has no space to write the Control
• Delete unnecessary titles (pages 67-68).
Information when recording or deleting contents.
When editing has been repeatedly performed,
the control Information area may come up to be
full even the recording area has enough space.
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
When recordings are performed
• Insert a new disc.
repeatedly onto an unstable disc, this
area may come up to be full.
Every time you insert a disc for recording,
the disc’s working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record full 49 titles.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Undo the finalizing for this disc
(page 32).
Recording Error
• You are trying to record onto the
unfinalized +VR mode discs recorded
on other unit.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 34).
The disc has no recording compatibility.
(Set “Make Recording Compatible” to
“ON” to convert the disc menu.)
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line to locate an Authorized Service Center.
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
– Can I program a timer recording with cable/satellite box?
No, you cannot control the unit by PC.
Yes, you can. Select “L1 (Rear)” or “L2 (Front)” as your
recording channel, and leave the cable/satellite box on
(pages 18, 26 and 38-41).
E7PEAUD_DR430KU_EN.indd 96
2009/12/14 18:34:12
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Aymara
Azerbaijani
Bashkir
Code
4747
4752
6563
4759
4764
5471
4771
4772
4847
5167
5072
4854
4855
4864
4853
5971
5759
4947
7254
4961
5464
4965
6058
5160
5161
5166
5256
5255
5264
5271
5358
5747
5158
5758
5360
5367
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5565
5560
5547
5551
5557
5347
5647
5669
5760
5765
6469
5771
6460
5761
5767
5861
5868
5860
5866
5957
5953
5965
5966
5955
5964
5961
6047
6051
6061
6149
6164
6159
6265
5247
6258
6266
6459
6461
Language
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Setswana
Shona
Code
6559
6553
6547
5350
6564
6554
6660
6560
6550
6555
6557
6558
6561
5165
6567
6569
6658
6653
6647
6666
6651
6654
6655
6661
6665
6664
6669
6757
6764
6772
6855
6861
6961
7054
5655
7161
Irish
Japanese
Javanese
Kannada
Kashmiri
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Sindhi
Singhalese
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Tagalog
Tajik
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Dutch
English
Esperanto
Estonian
Fiji
Finnish
French
Tamil
Tatar
Telugu
Thai
Tigrinya
Tonga
Tsonga
Turkish
Twi
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
Greek
Greenlandic
Guarani
Gujarati
Vietnamese
Volapuk
Wolof
Xhosa
Yiddish
Yoruba
Hebrew
Hindi
EN 97
E7PEAUD_DR430KU_EN.indd 97
2009/12/14 18:34:12
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PCM (pulse code modulation)
An electrical signal that directly represents sound.
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also lot of data compared to formats such as Dolby Digital
“Digital Audio”.
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Progressive Scan (480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 89 for instructions on
selective progressive scan mode.
Chapter
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
Sampling Frequency
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
Title (DVD only)
A collection of chapters on DVD. See also “Chapter”.
DTS® (Digital Theater System)
Track
DTS® is a multi channel surround sound system. By
connecting to DTS decoder you can enjoy dynamic and
realistic sound like movie theatre. DTS surround sound
technologies were developed by DTS, Inc.
Audio CD use tracks to divide up the content of a disc.
The DVD equivalent is called a chapter. See also “Chapter”.
Video mode
Video mode is the same recording format as used on
the DVD videos you purchase in local shops. You can
play back the discs recorded in this format in most DVD
players, however it offers only limited editing. You will
need to finalize discs recorded in video mode before
playing them back on other unit.
Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players.
HDMI™ (high definition multimedia interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
A basic recording format for DVD-RW. VR mode offers
advanced editing, however it is playable only on VR
mode compatible unit. Finalization is recommended
before playing them back on other unit.
JPEG (joint photographic experts group)
JPEG is a method of compressing still image files. You can
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.
A recording format for DVD+RW/+R. +VR mode offers basic
editing, and it is playable on most DVD players. Finalization
is recommended before playing them back on other unit.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
E7PEAUD_DR430KU_EN.indd 98
2009/12/14 18:34:13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
• This model complies with the below specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
General
Power requirements
Power consumption
Weight
AC120 V, 60 Hz
20 W (standby: 2.6 W)
4.86 lbs ( 2.2 kg )
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV system
16.6” x 2.4” x 10.2” (420 x 59.0 x 259 mm)
41 °F to 104 °F (5 °C to 40 °C)
Less than 80% (no condensation)
NTSC TV standard
Recording
Recording format
VR (video recording) format
Video format
+VR format
Recording discs
DVD-Rewritable/-Recordable, DVD+Rewritable/+Recordable
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Dolby Digital/LPCM (XP Recording mode only)
Input / Output
Video input
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Input level
Jacks
Video output
Output level
Jack
S-video input
Y (luminance) - Input level
C (color) - Input level
Jacks
S-video output
Y (luminance) - Output level
C (color) - Output level
Output 1 (rear)
1 Vp-p (75Ω)
RCA jack
Input 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
USB input
TYPE A
USB 2.0
Component video output
Output level
Output 1 (rear)
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks
HDMI output
Jack
HDMI jack
Audio input
During audio input
Audio output
During audio output
Jacks
Input 1 (rear), 2 (front) L/R
2 V rms (input impedance: more than 22 kΩ)
RCA jacks
Output 1 (rear) L/R
2 V rms (output impedance: less than 1 kΩ)
RCA jacks
Digital audio output
Output level
Jack
DV input
Jack
Output 1 (rear) COAXIAL
500 mVp-p (75Ω)
RCA jack
IEEE 1394
DV input jack (4 pin)
E7PEAUD_DR430KU_EN.indd 99
2009/12/14 18:34:13
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Limited United States Warranty
Digital Audio Video (“DAV”) Product - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT
AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA
AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED
IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Warranty
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and checking
the section “TROUBLESHOOTING,” you find that service is needed:
TACP warrants this DAV Product and its parts against defects in materials
or workmanship for a period of ninety (90) days after the date of original
retail purchase.
DURING THIS PERIOD, TACP WILL EXCHANGE A DEFECTIVE DAV
PRODUCT WITH A NEW OR REFURBISHED DAV PRODUCT WITHOUT
CHARGE TO YOU. DURING THE PERIOD THAT COMMENCES ON THE
DATE THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF ORIGINAL
RETAIL PURCHASE AND ENDS ON THE DATE THAT IS THREE HUNDRED
SIXTY FIVE (365) DAYS AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE, TACP WILL EXCHANGE A DEFECTIVE DAV PRODUCT
WITH A NEW OR REFURBISHED DAV PRODUCT FOR A FEE.
(1) For instructions on how to obtain warranty service for your DAV Product
under the TACP DAV Product Warranty Exchange Program, contact
TACP’s Consumer Solutions Center toll free at 1-800-631-3811.
(2) You must include the original bill of sale (or a copy of the original bill
of sale) or other proof of purchase along with the entire DAV Product
when sending the DAV Product to the TACP Warranty Exchange Center
specified by TACP’s Consumer Solutions Center. You are responsible
for all inbound transportation and insurance charges for the DAV Product
to the TACP Warranty Exchange Center.
Rental Units
The warranty for DAV Product rental units begins on the date of the first
rental or thirty (30) days after the date of shipment to the rental firm,
whichever comes first.
For additional information, visit TACP’s website: www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BYTHE LAW OF ANY STATE OF THE U.
S.A., INCLUDINGTHE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OFTHE LIMITED WARRANTIES SET
FORTH ABOVE.WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED,THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OFTACP WITH RESPECT TO THE REPAIR
OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALLTACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING,
BUT NOT LIMITEDTO, LOST PROFITS, BUSINESS INTERRUPTION,
OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY
USE, MISUSE OR INABILITY TO USE THIS DAV PRODUCT).
Commercial Units
DAV Products sold and used for commercial purposes have a limited
warranty for all parts and labor, which warranty begins on the date of
original retail purchase and ends on the date that is ninety (90) days
thereafter.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this DAV Product.
Complete and mail the enclosed product registration card or register your
DAV Product on-line at
By registering your DAV Product you will enable TACP to bring you new
products specifically designed to meet your needs and help us to contact
you in the unlikely event a safety notification is required under the U.S.
Consumer Product Safety Act. Failure to complete and return the product
registration card does not diminish your warranty rights.
www.tacp.toshiba.com/service as soon as possible.
No person, agent, distributor, dealer, or company is authorized to change,
modify, or extend the terms of these warranties in any manner whatsoever.
The time within which an action must be commenced to enforce any
obligation of TACP arising under the warranty or under any statute or law
of the United States or any state thereof is hereby limited to ninety (90)
days from the date you discover, or should have discovered, the defect.
This limitation does not apply to implied warranties arising under state law.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
THIS WARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS ANDYOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO
STATE INTHE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,WHEN
AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SOTHE ABOVE
PROVISIONS MAY NOT APPLY TOYOU UNDER SUCH CIRCUMSTANCES.
(1) You must retain your bill of sale or provide other proof of purchase.
(2) All warranty servicing of this DAV Product must be made pursuant
to the TACP DAV Product Warranty Exchange Program.
(3) The warranties from TACP are effective only if the DAV Product is
purchased and operated in the Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not covered
by this warranty. Reception problems caused by inadequate antenna
systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any DAV Product or parts that
have been lost or discarded by you or to damage to the DAV Product
or parts caused by fires, misuse, accident, Acts of God (such as
lightning or fluctuations in electric power), improper installation,
improper maintenance, or use in violation of instructions furnished by
TACP; use or malfunction through simultaneous use of this DAV Product
and connected equipment; or to units that have been modified or had
the serial number removed, altered, defaced, or rendered illegible.
(6) This warranty does not cover Product sold AS IS or WITH ALL
FAULTS.
E7PEAUD_DR430KU_EN.indd 100
2009/12/14 18:34:13
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
/LPLWHGꢀ&DQDGLDQꢀ:DUUDQW\
)RUꢀ7RVKLEDꢀ%UDQGꢀ'LJLWDOꢀ$XGLRꢁ9LGHRꢀ3URGXFWV
7RVKLEDꢀRIꢀ&DQDGDꢀ/LPLWHGꢀꢁꢂ7&/ꢂꢃꢀPDNHVꢀWKHꢀIROORZLQJꢀOLPLWHGꢀZDUUDQWLHVꢀWRꢀRULJLQDOꢀFRQVXPHUVꢀLQꢀ&DQDGDꢄꢀ7+(6(ꢀ/,0,7('ꢀ
:$55$17,(6ꢀ(;7(1'ꢀ72ꢀ7+(ꢀ25,*,1$/ꢀ&21680(5ꢀ385&+$6(5ꢀ25ꢀ$1<ꢀ3(5621ꢀ5(&(,9,1*ꢀ7+,6ꢀ726+,%$ꢀ%5$1'ꢀ
',*,7$/ꢀ$8',2ꢁ9,'(2ꢀ352'8&7ꢀꢂWKHꢀꢃ'$9ꢀ352'8&7ꢂ6ꢄꢃꢀRUꢀꢃ'$9ꢀ3URGXFWꢂVꢄꢃꢄꢀ$6ꢀ$ꢀ*,)7ꢀ)520ꢀ7+(ꢀ25,*,1$/ꢀ&21680(5ꢀ
385&+$6(5ꢀ$1'ꢀ72ꢀ12ꢀ27+(5ꢀ385&+$6(5ꢀ25ꢀ75$16)(5((ꢅ
'$9ꢀ352'8&76ꢀ385&+$6('ꢀ,1ꢀ&$1$'$ꢆꢀ$1'ꢀ86('ꢀ$1<:+(5(ꢀ2876,'(ꢀ2)ꢀ&$1$'$ꢀ,1&/8',1*ꢆꢀ:,7+287ꢀ/,0,7$7,21ꢆꢀ
7+(ꢀ81,7('ꢀ67$7(6ꢀ$1'ꢀ0(;,&2ꢆꢀ$5(ꢀ127ꢀ&29(5('ꢀ%<ꢀ7+(6(ꢀ:$55$17,(6ꢅꢀꢀ
'$9ꢀ352'8&76ꢀ385&+$6('ꢀ$1<:+(5(ꢀ2876,'(ꢀ2)ꢀ&$1$'$ꢆꢀ,1&/8',1*ꢆꢀ:,7+287ꢀ/,0,7$7,21ꢆꢀ7+(ꢀ81,7('ꢀ67$7(6ꢀ
$1'ꢀ0(;,&2ꢆꢀ$1'ꢀ86('ꢀ,1ꢀ&$1$'$ꢆꢀ$5(ꢀ127ꢀ&29(5('ꢀ%<ꢀ7+(6(ꢀ:$55$17,(6ꢅ
Fꢄ 5HSDLUꢀRIꢀGDPDJHꢀWKDWꢀLVꢀFRVPHWLFꢀRQO\ꢀRUꢀGRHVꢀQRWꢀDIIHFWꢀ
WKHꢀ'$9ꢀ3URGXFWꢀIXQFWLRQDOLW\ꢅꢀVXFKꢀDVꢀZHDUꢀDQGꢀWHDUꢅꢀ
VFUDWFKHVꢀDQGꢀGHQWVꢏ
Gꢄ 6HUYLFHꢀRQꢀ7RVKLEDꢐEUDQGHGꢀDFFHVVRU\ꢀLWHPVꢀꢁVXFKꢀ
DFFHVVRU\ꢀLWHPVꢀPD\ꢀEHꢀFRYHUHGꢀE\ꢀWKHLUꢀRZQꢀZDUUDQW\ꢃꢏ
Hꢄ 6HUYLFHꢀRQꢀWKLUGꢀSDUW\ꢀSURGXFWVꢀRUꢀVHUYLFHꢀPDGHꢀQHFHVVDU\ꢀ
E\ꢀXVHꢀRIꢀLQFRPSDWLEOHꢀWKLUGꢀSDUW\ꢀSURGXFWVꢏꢀ
/LPLWHGꢀ2QHꢀꢂꢇꢄꢀ<HDUꢀ:DUUDQW\ꢀRQꢀ3DUWVꢀDQGꢀ/DERXU
6XEMHFWꢀWRꢀWKHꢀPRUHꢀOLPLWHGꢀZDUUDQW\ꢀLIꢀWKHꢀ'$9ꢀ3URGXFWꢀLVꢀXVHGꢀIRUꢀ
DQ\ꢀFRPPHUFLDOꢀRUꢀEXVLQHVVꢀSXUSRVHVꢀDVꢀVHWꢀRXWꢀEHORZꢅꢀ7&/ꢀ
ZDUUDQWVꢀWKHꢀ'$9ꢀ3URGXFWꢀDQGꢀLWVꢀSDUWVꢀDJDLQVWꢀPDWHULDOꢀGHIHFWVꢀLQꢀ
PDWHULDOVꢀRUꢀZRUNPDQVKLSꢀWKDWꢀUHVXOWꢀLQꢀWKHꢀ'$9ꢀ3URGXFWꢀIDLOLQJꢀIRUꢀ
DꢀSHULRGꢀRIꢀRQHꢀꢁꢆꢃꢀ\HDUꢀDIWHUꢀWKHꢀGDWHꢀRIꢀRULJLQDOꢀUHWDLOꢀSXUFKDVHꢄꢀ
'85,1*ꢀ7+,6ꢀ3(5,2'ꢆꢀ7&/ꢀ:,//ꢆꢀ$7ꢀ7&/·6ꢀ237,21ꢆꢀ5(3$,5ꢀ
25ꢀ5(3/$&(ꢀ$ꢀ'()(&7,9(ꢀ3$57ꢀ:,7+ꢀ$ꢀ1(:ꢀ25ꢀ
5()85%,6+('ꢀ3$57ꢆꢀ:,7+287ꢀ&+$5*(ꢀ72ꢀ<28ꢀ)25ꢀ
3$576ꢀ25ꢀ/$%285ꢅꢀ<28ꢀ0867ꢀ'(/,9(5ꢀ7+(ꢀ(17,5(ꢀ'$9ꢀ
352'8&7ꢀ72ꢀ$ꢀ7&/ꢀ'$9ꢀ352'8&7ꢀ$87+25,=('ꢀ6(59,&(ꢀ
3529,'(5ꢀꢂꢃ$63ꢃꢄꢅꢀ<28ꢀ0867ꢀ3$<ꢀ)25ꢀ$//ꢀ
75$163257$7,21ꢀ$1'ꢀ,1685$1&(ꢀ&+$5*(6ꢀ)25ꢀ7+(ꢀ
'$9ꢀ352'8&7ꢀ72ꢀ$1'ꢀ)520ꢀ7+(ꢀ$63ꢅꢀ
5HQWDOꢀ8QLWV
7KHꢀZDUUDQW\ꢀIRUꢀ'$9ꢀ3URGXFWꢀUHQWDOꢀXQLWVꢀEHJLQVꢀZLWKꢀWKHꢀGDWHꢀRIꢀ
ILUVWꢀUHQWDOꢀRUꢀWKLUW\ꢀꢁꢇꢈꢃꢀGD\VꢀIURPꢀWKHꢀGDWHꢀRIꢀVKLSPHQWꢀWRꢀWKHꢀUHQWDOꢀ
ILUPꢅꢀZKLFKHYHUꢀFRPHVꢀILUVWꢄ
Iꢄ 6HUYLFHꢀPDGHꢀQHFHVVDU\ꢀE\ꢀWKHꢀVLPXOWDQHRXVꢀXVHꢀRIꢀWKLVꢀ
'$9ꢀ3URGXFWꢀDQGꢀFRQQHFWHGꢀHTXLSPHQWꢏꢀ
Jꢄ
0RGLILFDWLRQVꢀWRꢀWKHꢀ'$9ꢀ3URGXFWꢀQRWꢀDSSURYHGꢀLQꢀZULWLQJꢀ
E\ꢀ7&/ꢅꢀDQGꢀVHUYLFHꢀPDGHꢀQHFHVVDU\ꢀE\ꢀWKHꢀXVHꢀRUꢀ
LQVWDOODWLRQꢀRIꢀQRQꢐ7RVKLEDꢀPRGLILFDWLRQVꢀWRꢀWKHꢀ'$9ꢀ
3URGXFWꢏꢀ
Kꢄ 6HUYLFHꢀRIꢀDꢀ'$9ꢀ3URGXFWꢀRQꢀZKLFKꢀWKHꢀ726+,%$ꢀODEHOꢀRUꢀ
ORJRꢅꢀUDWLQJꢀODEHOꢀRUꢀVHULDOꢀQXPEHUꢀKDYHꢀEHHQꢀGHIDFHGꢀRUꢀ
UHPRYHGꢏ
Lꢄ 2QꢐVLWHꢀVHUYLFHꢀDQGꢀUHSDLUꢀRIꢀWKHꢀ'$9ꢀ3URGXFWꢏ
Mꢄ 'DPDJHꢀWRꢀWKHꢀ'$9ꢀ3URGXFWꢀFDXVHGꢀE\ꢀIDLOXUHꢀWRꢀIROORZꢀ
WKHꢀVSHFLILFDWLRQVꢅꢀ8VHUꢀPDQXDOVꢀRUꢀJXLGHVꢀDVꢀWRꢀXVDJHꢀ
DQGꢌRUꢀVWRUDJHꢄ
/LPLWHGꢀ:DUUDQW\ꢀIRUꢀ&RPPHUFLDOꢀ8QLWV
7&/ꢀZDUUDQWVꢀ'$9ꢀ3URGXFWVꢀWKDWꢀDUHꢀXVHGꢀIRUꢀDQ\ꢀFRPPHUFLDOꢀRUꢀ
EXVLQHVVꢀSXUSRVHVꢀDVꢀIROORZVꢉꢀꢀDOOꢀSDUWVꢀDUHꢀZDUUDQWHGꢀDJDLQVWꢀ
PDWHULDOꢀGHIHFWVꢀLQꢀPDWHULDOVꢀRUꢀZRUNPDQVKLSꢀWKDWꢀUHVXOWꢀLQꢀWKHꢀ'$9ꢀ
3URGXFWꢀIDLOLQJꢀIRUꢀDꢀSHULRGꢀRIꢀQLQHW\ꢀꢁꢊꢈꢃꢀGD\VꢀDIWHUꢀWKHꢀGDWHꢀRIꢀ
RULJLQDOꢀUHWDLOꢀSXUFKDVHꢄꢀ'85,1*ꢀ7+,6ꢀ3(5,2'ꢆꢀ7&/ꢀ:,//ꢆꢀ
$7ꢀ7&/·6ꢀ237,21ꢆꢀ5(3$,5ꢀ25ꢀ5(3/$&(ꢀ$ꢀ'()(&7,9(ꢀ3$57ꢀ
:,7+ꢀ$ꢀ1(:ꢀ25ꢀ5()85%,6+('ꢀ3$57ꢆꢀ:,7+287ꢀ&+$5*(ꢀ
72ꢀ<28ꢀ)25ꢀ3$576ꢀ25ꢀ/$%285ꢅꢀꢀ<28ꢀ0867ꢀ'(/,9(5ꢀ7+(ꢀ
(17,5(ꢀ'$9ꢀ352'8&7ꢀ72ꢀ$1ꢀ$63ꢅꢀ<28ꢀ0867ꢀ3$<ꢀ)25ꢀ$//ꢀ
75$163257$7,21ꢀ$1'ꢀ,1685$1&(ꢀ&+$5*(6ꢀ)25ꢀ7+(ꢀ
'$9ꢀ352'8&7ꢀ72ꢀ$1'ꢀ)520ꢀ7+(ꢀ$63ꢅ
'LVFODLPHUꢀDQGꢀ/LPLWDWLRQꢀRIꢀ5HPHG\
72ꢀ7+(ꢀ(;7(17ꢀ127ꢀ35(&/8'('ꢀ%<ꢀ/$:ꢆꢀ$//ꢀ27+(5ꢀ
(;35(66ꢀ$1'ꢀ,03/,('ꢀ:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ
5(35(6(17$7,216ꢀ)25ꢀ7+,6ꢀ'$9ꢀ352'8&7ꢆꢀ,1&/8',1*ꢀ
7+(ꢀ,03/,('ꢀ:$55$17,(6ꢀ$1'ꢀ&21',7,216ꢀ2)ꢀ
0(5&+$17$%,/,7<ꢀ$1'ꢀ),71(66ꢀ)25ꢀ$ꢀ3$57,&8/$5ꢀ
385326(ꢆꢀ$5(ꢀ+(5(%<ꢀ',6&/$,0('ꢀ$1'ꢀ(;&/8'('ꢅꢀꢀ
,)ꢀ7+(ꢀ$33/,&$%/(ꢀ/$:ꢆꢀ67$78725<ꢀ25ꢀ27+(5:,6(ꢆꢀ
35(&/8'(6ꢀ7+(ꢀ(;&/86,21ꢀ2)ꢀ$1<ꢀ,03/,('ꢀ
:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ5(35(6(17$7,216ꢀ
7+(1ꢀ68&+ꢀ,03/,('ꢀ:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ
5(35(6(17$7,216ꢀ$5(ꢀ27+(5:,6(ꢀ/,0,7('ꢀ,1ꢀ
'85$7,21ꢀ72ꢀ7+(ꢀ7(50ꢀ2)ꢀ7+,6ꢀ(;35(66ꢀ:5,77(1ꢀ
/,0,7('ꢀ:$55$17<ꢅꢀꢀ72ꢀ7+(ꢀ(;7(17ꢀ127ꢀ35(&/8'('ꢀ
%<ꢀ/$:ꢆꢀ67$78725<ꢀ25ꢀ27+(5:,6(ꢆꢀ7+,6ꢀ:5,77(1ꢀ
:$55$17<ꢀ683(5&('(6ꢀ$1'ꢀ63(&,),&$//<ꢀ',6&/$,06ꢀ
$1<ꢀ27+(5ꢀ:$55$17<ꢆꢀ&21',7,21ꢀ25ꢀ5(35(6(17$7,21ꢀ
127ꢀ67$7('ꢀ,1ꢀ7+,6ꢀ:$55$17<ꢆꢀ:+(7+(5ꢀ0$'(ꢀ%<ꢀꢀ
7&/ꢆꢀ726+,%$ꢀ&25325$7,21ꢆꢀꢀ7+(,5ꢀ$)),/,$7(6ꢆꢀ$'5Vꢀ
$1'ꢀ$63Vꢀ$1'ꢀ:+(7+(5ꢀ0$'(ꢀ25$//<ꢀ25ꢀ,1ꢀ:5,7,1*ꢀ
ꢂ,1&/8',1*ꢀ$1<ꢀ67$7(0(17ꢀ,1ꢀ$1<ꢀ%52&+85(ꢆꢀ35(66ꢀ
5(/($6(ꢆꢀ$11281&(0(17ꢆꢀ$'9(57,6(0(17ꢆꢀ32,17ꢀ2)ꢀ
6$/(ꢀ',63/$<ꢆꢀ(7&ꢅꢄꢅꢀꢀ
<RXUꢀ5HVSRQVLELOLW\
7+(ꢀ$%29(ꢀ:$55$17,(6ꢀ$5(ꢀ68%-(&7ꢀ72ꢀ7+(ꢀ
)2//2:,1*ꢀ&21',7,216ꢈ
ꢁꢆꢃꢀꢀ<RXꢀPXVWꢀSURYLGHꢀ\RXUꢀELOOꢀRIꢀVDOHꢀRUꢀRWKHUꢀSURRIꢀRIꢀSXUFKDVHꢄ
ꢁꢋꢃꢀꢀ$OOꢀZDUUDQW\ꢀVHUYLFLQJꢀRIꢀWKLVꢀ'$9ꢀ3URGXFWꢀPXVWꢀEHꢀSHUIRUPHGꢀ
ꢀꢀꢀꢀꢀꢀE\ꢀDQꢀ$63ꢄ
ꢁꢇꢃꢀꢀ7KHꢀZDUUDQWLHVꢀIURPꢀ7&/ꢀDUHꢀHIIHFWLYHꢀRQO\ꢀLIꢀWKHꢀ'$9ꢀ3URGXFWꢀ
ꢀꢀꢀꢀꢀꢀLVꢀꢁLꢃꢀSXUFKDVHGꢀDVꢀQHZꢀDQGꢀXQRSHQHGꢀIURPꢀ7&/ꢀRUꢀIURPꢀ7&/·Vꢀ
ꢀꢀꢀꢀꢀꢀDXWKRUL]HGꢀGLVWULEXWRUVꢅꢀGHDOHUVꢀRUꢀUHVHOOHUVꢀꢁꢃ$'5·VꢃꢃꢀDQGꢀꢁLLꢃꢀ
ꢀꢀꢀꢀꢀꢀORFDWHGꢌRSHUDWHGꢀLQꢀ&DQDGDꢄ
ꢁꢍꢃꢀꢀ:DUUDQWLHVꢀH[WHQGꢀRQO\ꢀWRꢀPDWHULDOꢀGHIHFWVꢀLQꢀPDWHULDOVꢀRUꢀ
ꢀꢀꢀꢀꢀꢀZRUNPDQVKLSꢀDVꢀOLPLWHGꢀDERYHꢅꢀDQGꢀGRꢀQRWꢀH[WHQGꢀWRꢉ
Dꢄ 6HUYLFHꢅꢀUHSDLUVꢀRUꢀUHSODFHPHQWꢀPDGHꢀQHFHVVDU\ꢀE\ꢀDFFLGHQWꢅ
PLVXVHꢅꢀDEXVHꢅꢀPRLVWXUHꢅꢀOLTXLGVꢅꢀGXVWꢅꢀGLUWꢅꢀQHJOHFWꢅꢀDFFLGHQWꢅꢀ
GDPDJHꢅꢀꢋꢍꢌꢎꢀDSSOLFDWLRQVꢅꢀLPSURSHUꢀLQVWDOODWLRQꢅꢀLPSURSHUꢀ
<28ꢀ0867ꢀ5($'ꢀ$1'ꢀ)2//2:ꢀ$//ꢀ6(7ꢐ83ꢀ$1'ꢀ86$*(ꢀ
,16758&7,216ꢀ,1ꢀ7+(ꢀ$33/,&$%/(ꢀ86(5ꢀ*8,'(6ꢀ$1'ꢌ25ꢀ
0$18$/6ꢄꢀ,)ꢀ<28ꢀ)$,/ꢀ72ꢀ'2ꢀ62ꢅꢀ7+,6ꢀ'$9ꢀ352'8&7ꢀ0$<ꢀ
127ꢀ)81&7,21ꢀ3523(5/<ꢀ$1'ꢀ<28ꢀ0$<ꢀ68))(5ꢀ'$0$*(ꢄꢀ
7+,6ꢀ:$55$17<ꢀ:,//ꢀ127ꢀ&29(5ꢀ$1<ꢀ6(59,&(ꢀ7+$7ꢀ,6ꢀ
5(48,5('ꢅꢀ,1ꢀ3$57ꢀ25ꢀ,1ꢀ:+2/(ꢅꢀ$6ꢀ$ꢀ5(68/7ꢀ2)ꢀ$1<ꢀ
)$,/85(ꢀ72ꢀ)2//2:ꢀ7+(ꢀ6(7ꢐ83ꢀ$1'ꢀ86$*(ꢀ
,16758&7,216ꢄꢀꢀꢀ7+,6ꢀ:$55$17<ꢀ'2(6ꢀ127ꢀ$33/<ꢀ$1'ꢀ
6+$//ꢀ%(ꢀ92,'ꢀ$1'ꢀ81(1)25&($%/(ꢀ,)ꢀ7+(ꢀ'$9ꢀ
352'8&7ꢀ,6ꢀ23(1('ꢅꢀ6(59,&('ꢅꢀ25ꢀ5(3$,5('ꢀ%<ꢀ
3(56216ꢀ27+(5ꢀ7+$1ꢀ7+26(ꢀ$87+25,=('ꢀ%<ꢀ7&/ꢀ72ꢀ
6(59,&(ꢀ25ꢀ5(3$,5ꢀ7+(ꢀ'$9ꢀ352'8&7ꢄ
RSHUDWLRQꢅꢀLPSURSHUꢀFOHDQLQJꢅꢀLPSURSHUꢀPDLQWHQDQFHꢅꢀQRUPDO
ꢀ
ZHDUꢀDQGꢀWHDUꢅꢀRUꢀDQ\ꢀRWKHUꢀꢀH[WHUQDOꢀFDXVHꢀRUꢀHYHQWꢅꢀDFWꢀRU
RPLVVLRQꢀRXWVLGHꢀWKHꢀFRQWUROꢀRIꢀ7&/ꢅꢀLQFOXGLQJꢀILUHꢅꢀWKHIWꢅꢀDFWV
RIꢀ*RGꢅꢀDOWHUDWLRQꢅꢀSRZHUꢀIDLOXUHVꢅꢀSRZHUꢀVXUJHVꢀRUꢀSRZHU
VKRUWDJHVꢅꢀOLJKWQLQJꢅꢀRWKHUꢀHOHFWULFDOꢀIDXOWVꢅꢀꢀRUꢀUHSDLUVꢅꢀ
ꢀ
PRGLILFDWLRQVꢀRUꢀUHSODFHPHQWVꢀE\ꢀSHUVRQVꢀRWKHUꢀWKDQꢀWKRVH
DXWKRUL]HGꢀE\ꢀ7&/ꢀWRꢀVHUYLFHꢀWKHꢀ'$9ꢀ3URGXFWꢏ
Eꢄ 5HSODFHPHQWꢀRIꢀPLVVLQJꢅꢀGLVFDUGHGꢀRUꢀORVWꢀSDUWVꢅꢀWKHꢀ
SURYLVLRQꢀRIꢀUHWURILWVꢅꢀRUꢀSUHYHQWLYHꢀPDLQWHQDQFHꢏ
EN 101
E7PEAUD_DR430KU_EN.indd 101
2009/12/14 18:34:14
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
,)ꢀ7+(ꢀ'$9ꢀ352'8&7ꢀ)$,/6ꢀ72ꢀ:25.ꢀ$6ꢀ:$55$17('ꢀ$%29(ꢅꢀ
*HQHUDOꢀ3URYLVLRQV
<285ꢀ62/(ꢀ$1'ꢀ(;&/86,9(ꢀ5(0('<ꢀ6+$//ꢀ%(ꢀ5(3$,5ꢀ25ꢀ
5(3/$&(0(17ꢀ2)ꢀ7+(ꢀ'()(&7,9(ꢀ3$57ꢄꢀ,1ꢀ12ꢀ(9(17ꢀ:,//ꢀ
7&/ꢅꢀ726+,%$ꢀ&25325$7,21ꢅꢀ7+(,5ꢀ$)),/,$7(6ꢅꢀ$'5Vꢀ25ꢀ
$63Vꢀꢁ7+(ꢀꢃꢀ5(/$7('ꢀ3$57,(6ꢃꢀꢃꢀ%(ꢀ/,$%/(ꢀ72ꢀ<28ꢀ25ꢀ$1<ꢀ
7+,5'ꢀ3$57<ꢀ)25ꢀ$1<ꢀ'$0$*(6ꢅꢀ021(<ꢅꢀ5(,0%856(0(17ꢅꢀ
&2676ꢀ25ꢀ(;3(16(6ꢄꢀꢀ7+,6ꢀ/,0,7$7,21ꢀ$33/,(6ꢀ72ꢀ'$0$*(6ꢅꢀ
021(<ꢅꢀ5(,0%856(0(17ꢅꢀ&2676ꢀ25ꢀ(;3(16(6ꢀ2)ꢀ$1<ꢀ.,1'ꢀ
:+$762(9(5ꢀ,1&/8',1*ꢀ$1<ꢀ',5(&7ꢀ25ꢀ,1',5(&7ꢀ'$0$*(6ꢅꢀ
'$0$*(ꢀ72ꢀ3523(57<ꢀ25ꢀ3(5621ꢅꢀ/267ꢀ352),76ꢅꢀ/267ꢀ
6$9,1*6ꢅꢀ,1&219(1,(1&(ꢀ25ꢀ27+(5ꢀ63(&,$/ꢅꢀ,1&,'(17$/ꢅꢀ
(;(03/$5<ꢀ25ꢀ&216(48(17,$/ꢀ'$0$*(6ꢅꢀ:+(7+(5ꢀ)25ꢀ
%5($&+ꢀ2)ꢀ:$55$17<ꢅꢀ%5($&+ꢀ2)ꢀ&2175$&7ꢅꢀ7257ꢀ
ꢁ,1&/8',1*ꢀ1(*/,*(1&(ꢃꢅꢀ81'(5ꢀ$ꢀ67$787(ꢀ25ꢀ81'(5ꢀ$1<ꢀ
27+(5ꢀ/$:ꢀ25ꢀ)250ꢀ25ꢀ$&7,21ꢅꢀ25ꢀ:+(7+(5ꢀ$5,6,1*ꢀ287ꢀ
2)ꢀ7+(ꢀ86(ꢀ2)ꢀ25ꢀ,1$%,/,7<ꢀ72ꢀ86(ꢀ7+(ꢀ'$9ꢀ352'8&7ꢅꢀ
(9(1ꢀ,)ꢀ$1<ꢀ2)ꢀ7+(ꢀ5(/$7('ꢀ3$57,(6ꢀ+$6ꢀ%((1ꢀ$'9,6('ꢀ2)ꢀ
7+(ꢀ3266,%,/,7<ꢀ2)ꢀ68&+ꢀ'$0$*(6ꢀ25ꢀ2)ꢀ$1<ꢀ&/$,0ꢀ%<ꢀ
$1<ꢀ27+(5ꢀ3$57<ꢄꢀ
,IꢀDQGꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀDQ\ꢀSURYLVLRQꢀRIꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀ
VKRXOGꢀJHQHUDOO\ꢀEHꢀIRXQGꢀWRꢀEHꢀXQHQIRUFHDEOHꢅꢀWKHꢀ
XQHQIRUFHDEOHꢀSURYLVLRQꢀVKDOOꢀEHꢀVHYHUHGꢀIURPꢀWKHꢀZDUUDQW\ꢀ
DQGꢀGHHPHGꢀQRWꢀWRꢀIRUPꢀSDUWꢀRIꢀWKHꢀZDUUDQW\ꢄꢀꢀ7KHꢀUHPDLQLQJꢀ
SURYLVLRQVꢀRIꢀWKLVꢀZDUUDQW\ꢀVKDOOꢀEHꢀDQGꢀUHPDLQꢀYDOLGꢀDQGꢀ
HQIRUFHDEOHꢄꢀꢀ,IꢀDQGꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀDQ\ꢀSURYLVLRQꢀRIꢀWKLVꢀ
OLPLWHGꢀZDUUDQW\ꢀDVꢀLWꢀUHODWHVꢀWRꢀDQ\ꢀꢀRIꢀWKHꢀ5HODWHGꢀ3DUWLHVꢀLVꢀ
IRXQGꢀWRꢀEHꢀLQYDOLGꢀRUꢀXQHQIRUFHDEOHꢀLQꢀUHVSHFWꢀRIꢀWKDWꢀSDUW\ꢀ
ꢁWKHꢀꢃ([FOXGHGꢀ3DUW\ꢃꢀꢃꢅꢀWKHꢀ([FOXGHGꢀ3DUW\ꢀVKDOOꢀEHꢀGHHPHGꢀ
WRꢀEHꢀVHYHUHGꢀRUꢀH[FOXGHGꢀIURPꢀWKHꢀSURYLVLRQꢅꢀDQGꢀWKHꢀSURYLVLRQꢀ
VKDOOꢀUHPDLQꢀYDOLGꢅꢀHQIRUFHDEOHꢀDQGꢀDSSOLFDEOHꢀLQꢀUHVSHFWꢀRIꢀWKHꢀ
RWKHUꢀRUꢀUHPDLQLQJꢀ5HODWHGꢀ3DUWLHVꢄ
7RꢀWKHꢀH[WHQWꢀSHUPLWWHGꢀE\ꢀODZꢅꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀVKDOOꢀEHꢀ
JRYHUQHGꢀDQGꢀFRQVWUXHGꢀLQꢀDFFRUGDQFHꢀZLWKꢀWKHꢀODZVꢀRIꢀ2QWDULRꢄ
,IꢀWKHUHꢀLVꢀDQ\ꢀLQFRQVLVWHQF\ꢀEHWZHHQꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢅꢀRQꢀ
WKHꢀRQHꢀKDQGꢅꢀDQGꢀDQ\ꢀVWDWHPHQWꢀLQꢀWKHꢀSDFNDJLQJꢀRIꢀWKHꢀ'$9ꢀ
3URGXFWꢀRUꢀLQꢀDQ\ꢀRWKHUꢀGRFXPHQWꢀHQFORVHGꢀZLWKꢅꢀRUꢀXVHGꢀLQꢀWKHꢀ
FRQWH[WꢀRIꢀWKHꢀSURPRWLRQꢀRUꢀVDOHꢀRIꢅꢀWKHꢀ'$9ꢀ3URGXFWꢅꢀRQꢀWKHꢀ
RWKHUꢀKDQGꢅꢀWKHꢀSURYLVLRQVꢀRIꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀVKDOOꢀSUHYDLOꢄ
1RꢀSHUVRQꢅꢀDJHQWꢅꢀGLVWULEXWRUꢅꢀGHDOHUꢀRUꢀFRPSDQ\ꢀLVꢀDXWKRUL]HGꢀWRꢀ
FKDQJHꢅꢀPRGLI\ꢀRUꢀH[WHQGꢀWKHꢀWHUPVꢀRIꢀWKHVHꢀZDUUDQWLHVꢀLQꢀDQ\ꢀ
PDQQHUꢀZKDWVRHYHUꢄꢀ
+RZꢀWRꢀ2EWDLQꢀ:DUUDQW\ꢀ6HUYLFHV
$UELWUDWLRQꢀDQGꢀ'LVSXWHꢀ5HVROXWLRQ
7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀODZꢅꢀDQ\ꢀFODLPꢅꢀGLVSXWHꢅꢀ
,IꢅꢀDIWHUꢀIROORZLQJꢀDOOꢀRIꢀWKHꢀRSHUDWLQJꢀLQVWUXFWLRQVꢀLQꢀWKLVꢀPDQXDOꢀ
DQGꢀFKHFNLQJꢀWKHꢀꢂ7URXEOHVKRRWLQJꢂꢀVHFWLRQꢅꢀ\RXꢀILQGꢀWKDWꢀ
VHUYLFHꢀLVꢀQHHGHGꢉ
FRQWURYHUV\ꢀRUꢀGLVDJUHHPHQWꢀꢁZKHWKHUꢀIRUꢀEUHDFKꢀRIꢀZDUUDQW\ꢅꢀ
EUHDFKꢀRIꢀFRQWUDFWꢅꢀWRUWꢀꢁLQFOXGLQJꢀQHJOLJHQFHꢃꢅꢀXQGHUꢀDꢀVWDWXWHꢀ
RUꢀXQGHUꢀDQ\ꢀRWKHUꢀODZꢀRUꢀIRUPꢀRIꢀDFWLRQꢃꢀDJDLQVWꢀDQ\ꢀRIꢀWKHꢀ
5HODWHGꢀ3DUWLHVꢀDULVLQJꢀRXWꢀRIꢅꢀRUꢀRWKHUZLVHꢀUHODWLQJꢀWRꢉꢀꢁLꢃꢀWKLVꢀ
ZDUUDQW\ꢏꢀꢁLLꢃꢀWKHꢀ'$9ꢀ3URGXFWꢏꢀꢁLLLꢃꢀDQ\ꢀRUDOꢀRUꢀZULWWHQꢀUHSUHVHQWDWLRQVꢅꢀ
VWDWHPHQWVꢅꢀEURFKXUHVꢅꢀSUHVVꢀUHOHDVHVꢅꢀꢀDGYHUWLVLQJꢅꢀDQQRXQFHPHQWꢅꢀ
SRLQWꢀRIꢀVDOHꢀGLVSOD\ꢅꢀRUꢀSURPRWLRQDOꢀPDWHULDOꢀUHODWLQJꢀWRꢀWKHꢀ'$9ꢀ
3URGXFWꢏꢀꢁLYꢃꢀWKHꢀUHODWLRQVKLSVꢀWKDWꢀUHVXOWꢀIURPꢀWKLVꢀZDUUDQW\ꢅꢀꢁWKHꢀ
IRUHJRLQJꢀFODLPVꢅꢀGLVSXWHVꢀFRQWURYHUVLHVꢀDQGꢀGLVDJUHHPHQWVꢀDUHꢀ
FROOHFWLYHO\ꢀUHIHUUHGꢀWRꢀDVꢀWKHꢀꢂ'LVSXWHꢂꢃꢅꢀVKDOOꢀEHꢀUHIHUUHGꢀWRꢀDQGꢀ
UHVROYHGꢀE\ꢀILQDOꢀDQGꢀELQGLQJꢀDUELWUDWLRQꢀꢁWRꢀWKHꢀH[FOXVLRQꢀRIꢀWKHꢀ
FRXUWVꢃꢄꢀꢀ7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀODZꢅꢀ\RXꢀDJUHHꢀWRꢀZDLYHꢀDQ\ꢀ
ULJKWꢀWKDWꢀ\RXꢀPD\ꢀKDYHꢀWRꢀFRPPHQFHꢀRUꢀSDUWLFLSDWHꢀLQꢀDQ\ꢀ
UHSUHVHQWDWLYHꢀRUꢀFODVVꢀSURFHHGLQJꢀDJDLQVWꢀWKHꢀ5HODWHGꢀ3DUWLHVꢀ
UHODWLQJꢀWRꢀDQ\ꢀ'LVSXWHꢄꢀꢀ,IꢀDQGꢀZKHUHꢀDSSOLFDEOHꢀDQGꢀWRꢀWKHꢀH[WHQWꢀQRWꢀ
SUHFOXGHGꢀE\ꢀODZꢅꢀ\RXꢀIXUWKHUꢀDJUHHꢀWRꢀRSWꢀRXWꢀRIꢀDQ\ꢀVXFKꢀ
UHSUHVHQWDWLYHꢀRUꢀFODVVꢀSURFHHGLQJVꢄꢀꢀ$UELWUDWLRQꢀRIꢀDQ\ꢀ'LVSXWHꢀZLOOꢀ
EHꢀFRQGXFWHGꢀLQꢀWKHꢀIRUXPꢀDQGꢀLQꢀWKHꢀPDQQHUꢀDVꢀDJUHHGꢀWRꢀEHWZHHQꢀ
\RXꢀDQGꢀ7&/ꢄꢀꢀ)DLOLQJꢀVXFKꢀDJUHHPHQWꢅꢀWKHꢀDUELWUDWLRQꢀZLOOꢀEHꢀ
FRQGXFWHGꢀE\ꢀRQHꢀDUELWUDWRUꢀSXUVXDQWꢀWRꢀWKHꢀODZVꢀDQGꢀUXOHVꢀUHODWLQJꢀ
WRꢀDUELWUDWLRQꢀJHQHUDOO\ꢀLQꢀIRUFHꢀLQꢀWKHꢀMXULVGLFWLRQꢀLQꢀZKLFKꢀ\RXꢀUHVLGHꢀ
DWꢀWKHꢀWLPHꢀWKDWꢀWKHꢀ'LVSXWHꢀDULVHVꢄꢀꢀ7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀ
ODZꢅꢀQRꢀFODLPꢅꢀGLVSXWHꢅꢀFRQWURYHUV\ꢀRUꢀGLVDJUHHPHQWꢀRIꢀDQ\ꢀRWKHUꢀ
SHUVRQꢀPD\ꢀEHꢀMRLQHGꢀRUꢀFRPELQHGꢀZLWKꢀDQ\ꢀ'LVSXWHꢀE\ꢀ\RXꢅꢀZLWKRXWꢀ
WKHꢀSULRUꢀZULWWHQꢀFRQVHQWꢀRIꢀ7&/ꢄꢀꢀꢀ
ꢁꢆꢃꢀꢀꢀ7RꢀILQGꢀWKHꢀQHDUHVWꢀ$63ꢅꢀYLVLWꢀ7&/·VꢀZHEꢀVLWHꢀDWꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀZZZꢄWRVKLEDꢄFDꢅꢀRUꢀFDOOꢀWROOꢀIUHHꢀꢆꢐꢑꢈꢈꢐꢋꢒꢑꢐꢇꢍꢈꢍꢄꢀ
ꢁꢋꢃꢀꢀꢀ3UHVHQWꢀ\RXUꢀELOOꢀRIꢀVDOHꢀRUꢀRWKHUꢀSURRIꢀRIꢀSXUFKDVHꢀWRꢀWKHꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀ$63ꢄꢀ
)RUꢀDGGLWLRQDOꢀLQIRUPDWLRQꢅꢀYLVLWꢀ7&/ꢓVꢀZHEVLWHꢀDWꢀZZZꢄWRVKLEDꢄFD
&ULWLFDOꢀ$SSOLFDWLRQV
7KHꢀ'$9ꢀ3URGXFWꢀ\RXꢀKDYHꢀSXUFKDVHGꢀLVꢀQRWꢀGHVLJQHGꢀIRUꢀDQ\ꢀ´FULWLFDOꢀ
DSSOLFDWLRQVꢄµꢀ´&ULWLFDOꢀDSSOLFDWLRQVµꢀPHDQVꢀOLIHꢀVXSSRUWꢀV\VWHPVꢅꢀ
PHGLFDOꢀDSSOLFDWLRQVꢅꢀFRQQHFWLRQVꢀWRꢀLPSODQWHGꢀPHGLFDOꢀGHYLFHVꢅꢀ
FRPPHUFLDOꢀWUDQVSRUWDWLRQꢅꢀQXFOHDUꢀIDFLOLWLHVꢀRUꢀV\VWHPVꢀRUꢀDQ\ꢀRWKHUꢀ
DSSOLFDWLRQVꢀZKHUHꢀ'$9ꢀ3URGXFWꢀIDLOXUHꢀFRXOGꢀOHDGꢀWRꢀLQMXU\ꢀWRꢀSHUVRQV
ꢀ
RUꢀORVVꢀRIꢀOLIHꢀRUꢀFDWDVWURSKLFꢀSURSHUW\ꢀGDPDJHꢄ
,)ꢀ7+(ꢀ&86720(5ꢀ86(6ꢀ7+(ꢀ'$9ꢀ352'8&7ꢀ,1ꢀ$1<ꢀ&5,7,&$/ꢀ
$33/,&$7,21ꢅꢀ7+(ꢀ&86720(5ꢀ²ꢀ$1'ꢀ127ꢀ7&/ꢅꢀ,76ꢀ$)),/,$7(6ꢅꢀ
$'5Vꢀ25ꢀ$63Vꢀ²ꢀ$6680(ꢀ62/(ꢀ$1'ꢀ)8//ꢀ5(63216,%,/,7<ꢀ)25ꢀ
68&+ꢀ86(ꢄꢀꢀ7&/ꢀ5(6(59(6ꢀ7+(ꢀ5,*+7ꢀ72ꢀ5()86(ꢀ72ꢀ6(59,&(
$1<ꢀ'$9ꢀ352'8&7ꢀ86('ꢀ,1ꢀ$ꢀ&5,7,&$/ꢀ$33/,&$7,21ꢄꢀꢀ7&/ꢅꢀ,76ꢀ
$)),/,$7(6ꢅꢀ$'5Vꢀ$1'ꢀ$63Vꢀ+(5(%<ꢀ',6&/$,0ꢀ$1<ꢀ$1'ꢀ$//ꢀ
/,$%,/,7<ꢅꢀ'$0$*(6ꢀ$1'ꢀ&216(48(1&(6ꢀ$5,6,1*ꢀ287ꢀ2)ꢀ7+(ꢀ
6(59,&(ꢀ25ꢀ5()86$/ꢀ72ꢀ6(59,&(ꢀ68&+ꢀ'$9ꢀ352'8&7ꢀ$1'ꢀ
)857+(5ꢀ',6&/$,0ꢀ$1<ꢀ$1'ꢀ$//ꢀ/,$%,/,7<ꢅꢀ&216(48(1&(6ꢀ$1'ꢀ
'$0$*(6ꢀ7+$7ꢀ0$<ꢀ$5,6(ꢀ25ꢀ5(68/7ꢀ)520ꢀ7+(ꢀ86(ꢀ2)ꢀ7+(ꢀ
'$9ꢀ352'8&7ꢀ,1ꢀ$1<ꢀ&5,7,&$/ꢀ$33/,&$7,216ꢄ
E7PEAUD_DR430KU_EN.indd 102
2009/12/14 18:34:15
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
E7PEAUD_DR430KU_EN.indd 103
2009/12/14 18:34:15
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Teledex Cordless Telephone DCT2800 Series User Manual
TOA Electronics Intercom System EX 16 User Manual
Trane Heat Pump 2TWB SVU01A EN User Manual
Trane Refrigerator CCAF User Manual
TRENDnet Router trend COMBI 650 User Manual
Triarch Indoor Furnishings 75200 User Manual
Unwind Stereo System DT 920 User Manual
ViewSonic Camcorder VP3D1 User Manual
Viking Refrigerator DDSB483 User Manual
WatchGuard Technologies Network Router SOHO 6 User Manual