00873A-SD-6980SY-Cover 8/22/05 4:42 PM Page 3
DVD VIDEO PLAYER
SD-6980SY
OWNER’S MANUAL
2005 Toshiba Corporation
C
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 3
Introduction
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of
time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
14) When you use headphones on the amplifier, keep the volume at a moderate level.
If you use the headphones continuously with high volume sound, it may cause hearing damage.
15) Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
16) Never insert objects of any kind into this apparatus through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on
the apparatus.
17) Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious
personal injury.
18) Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal
injury and serious damage to the apparatus.
19) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
ENG-3
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 4
Introduction
Note:
• This unit can be used only where the power supply is AC 110~240V, 60/50Hz.
It cannot be used elsewhere.
Notes on Regional Codes
• Most DVD discs have a globe with one or more numbers in it clearly visible on the cover.
This number must match your DVD player’s regional code or the disc cannot play.
• If you try to play a DVD with a different region code from your player, the message “Check Regional
Code” appears on the TV screen.
Notes on DVDs and Video CDs
Because of problems and errors that can occur during the creation of DVD and CD software
and/or the manufacture of DVD and CD discs, Toshiba cannot guarantee that this DVD player
will play every feature of every DVD bearing the DVD logo and/or every CD bearing the CD
logo. As one of the creators of DVD technology, Toshiba DVD players are manufactured using
the highest standards of quality, and as a result, such incompatibilities are rare.
Notes on copyright
The unauthorized recording, use, distribution, or revision of television programs, videotapes,
DVDs and other materials, is prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and/or criminal liability.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
• The product unit accompanying this user manual is licensed under certain intellectual property rights
of certain third parties. In particular, this product is licensed under the following US patents:
5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655,
5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and
under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
ENG-4
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 5
Introduction
HANDLING CAUTIONS
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
NOTES ON LOCATING
Place the DVD video player on a level surface. Do not use it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded disc may become disaligned and damage the DVD video player.
When you place this DVD video player near a TV, radio, or VCR, the playback picture may become poor and
the sound may be distorted. In this case, place the DVD video player away from the TV, radio, or VCR.
STORING DISCS
Do not store discs in a place subject to direct sunlight or near heat sources.
Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
MAINTENANCE OF CABINET
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
ENG-5
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 6
Introduction
Before you start
Accessories
Remote
Control
Batteries for
Remote Control
(AA Size)
User’s Manual
Video/Audio
Cable
HDMI-HDMI
Cable
Install Batteries in the Remote control Operating with the remote control
Point the remote control at the remote sensor and
press the buttons.
1
Open the battery
cover on the back of
the remote control.
30º
30º
Within approx. 7m(23 feet)
2
Insert two AA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
Distance : Approx. 7m (23 feet) from the front of the
remote sensor.
Angle : Approx. 30º in each direction of the front of the
remote sensor.
3
Replace the battery
cover.
• Do not expose the remote sensor of the DVD video
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be
able to opearate the DVD video player via the remote
control.
If the remote control doesn’t operate • If the remote control does not operate correctly, or if
properly:
the operating range becomes reduced, replace
batteries with new ones.
• When necessary to replace batteries in the remote
control, always replace both batteries with new
ones. Never mix battery types or use new and used
batteries in combination.
+ -
- Check the polarity / of the batteries (Dry-Cell).
- Check if the batteries are drained.
- Check if remote control sensor is blocked by
obstacles.
- Check if there is any fluorescent lighting nearby.
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used
for an extended period of time. This will prevent
battery acid from leaking into the battery
compartment.
Caution: Never throw batteries into a fire.
Notes:
• Be sure to use AA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
ENG-6
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 7
Introduction
Table of Contents
Introduction
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Type of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connections
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic Functions
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Advanced Functions
Selecting the Audio Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Instant Replay/Skip Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using the Marker Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using the Zoom Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
How to insert a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
DVD AUDIO Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Super Audio CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Clips Menu for MP3/JPEG/MPEG4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Folder Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
MPEG4 Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Picture CD Playback for HD-JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Changing Setup Menu
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting Up the Language Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting Up the Audio Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Reference
Controlling a TV with the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
ENG-7
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 8
Introduction
General Features
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound reproduction.
Note
- Discs which cannot be played with this
player.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM • WMA
• CDV
• CVD
Slow Motion
An important scene can be viewed in slow motion.
• CDGs play audio only, not graphics.
- Ability to play back may depend on recording
conditions.
Program Play (CD)
You can program tracks to play in desired order.
• DVD-R
• CD-RW
• DVD-RW (V mode)
- The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
PROGRESSIVE SCAN OUTPUTS
[525p(480p) / 625p(576p)]
Progressive Scan
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IN CASE OF 525(480) OR 625(576)
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING
YOUR TV SET COMPATIBILITY WITH THIS MODEL
525p(480p) AND 625p(576p) DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3
This unit can play discs created from MP3 files.
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
Super Audio CD
Super Audio CD is a high quality audio format with
higher sampling rates and fuller, richer sound as
compared to regular CD.
DVD AUDIO
DVD AUDIO is a format specifically designed to
provide the highest possible audio fidelity capable on
DVD.
MPEG4
This unit can play MPEG4 formats within an avi file.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure
digital video/audio signal path from the player to
your TV.
ENG-8
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 9
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
Notes on Discs
HANDLING DISCS
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
This manual provides information on the operation
and maintenance of your DVD Home Theater
System.
Should the unit require service, contact an authorized
service location.
Symbol Used in this Manual
The lightning flash symbol alerts you to
the presence of dangerous voltage within
the product enclosure that may constitute
a risk of electric shock.
STORING DISCS
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct
sunlight.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
CLEANING DISCS
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the centre out.
Indicates hazards likely to cause harm to
the unit itself or other material damage.
About the
Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
ENG-9
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 10
Introduction
Type of Playable Discs
This DVD player is capable of playing the following types of discs with the corresponding logos:
Recording Types
Disc Size
Max. Playing Time
Characteristics
Disc Types (Logos)
-
-
DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
Double-sided 480 min.
DVD-VIDEO
5"
Audio
+
Video
Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Double-sided 160 min.
31/2"
5"
74 min.
VIDEO-CD
AUDIO-CD
DVD-AUDIO
Audio
+
Video
-
-
Video with CD sound, VHS quality &
MPEG-1 compression technology.
20 min.
74 min.
31/2"
5"
CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Audio
31/2"
5"
20 min.
Audio
+
Video
-
-
DVD AUDIO is a format specifically
designed to provide the highest
possible audio fidelity capable on DVD.
400 min.
Super Audio CD is a high quality audio
format with higher sampling rates and
fuller, richer sound as compared to
regular CD.
Super Audio CD
Audio
74 min.
5"
Disc Markings
Region Number
~
Play Region Number
NTSC broadcast system in U.S.A, Canada, Korea,
Japan, etc.
Both the DVD player and the discs are
coded by region. These regional codes
must match in order for the disc to
play. If the codes do not match, the
disc will not play.
NTSC
PAL
PAL broadcast system in U.K, France, Germany, etc.
Dolby Digital disc
Stereo disc
The Region Number for this player is
printed on the rear panel of the
player.
STEREO
DIGITAL
SOUND
Digital Audio disc
DTS disc
DivX Certification
MP3 disc
DivX, DivX Certified, and
associated logos are
trademarks of DivX, Inc and
are used under license.
DVD AUDIO disc
Super Audio CD disc
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow playback
and may cause damage to the DVD player.
ENG-10
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 11
Introduction
Front Panel
9
10
1 2
3
4
5
6
7
8
1. ON/STANDBY(
)
7. SKIP ( ) / SEARCH
- Use to reverse skip a scene or music.
- Press and hold to search backward.
Use to turn your player on and off (standby).
2. POWER Indicator
This indicator will lights up when the power is on.
8. SKIP ( ) / SEARCH
- Use to forward skip a scene or music.
- Press and hold to search forward.
3. DISC TRAY
Place the disc here.
9. STOP (
)
4. DISPLAY
Stops disc play.
Operation indicators are displayed here.
10. PLAY/PAUSE (
Begin or pause disc play.
)
5. MULTI- CARD INPUT
Insert a Memory Card.
6. OPEN/CLOSE (
)
Press to open and close the disc tray.
Front Panel Display
1
1. Disc type indicators
2. Play / Pause
2
3
3. Displays various messages
concerning operations such as PLAY,
STOP, LOAD, etc.
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
ENG-11
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 12
Introduction
Rear Panel
2
7
1
2
3
4
5
6
1. 5.1CH ANALOG AUDIO OUT JACKS
-
5. S-VIDEO OUT JACK
Connect to an amplifier with 5.1ch analog input jacks.
-
Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
2. DIGITAL AUDIO OUT JACKS
-
Use either an optical or coaxial digital cable to connect
-
The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
to a compatible Dolby Digital receiver.
Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
-
6. HDMI OUT JACK
-
Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
If you want to use a Video, S-Video or Component
Output, unplug HDMI cable.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.
-
4. VIDEO OUT JACK
-
-
Use a video cable to connect to the Video input jack on
your television.
7. COMPONENT VIDEO OUT JACKS
-
-
The Video Output in Setup Menu must be set to
COMPONENT(I-SCAN) or COMPOSITE/S-VIDEO.
Use these jacks if you have a TV with Component
R
B
Video in jacks. These jacks provide P , P and Y video.
If HDMI/COMPONENT(P-SCAN) Video Output is
selected in Setup Menu, progressive scan mode will
work.
-
-
If COMPONENT(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- If HDMI/COMPONENT(P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 64 ~ 66 to get more information on how to use the setup menu.
ENG-12
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 13
Introduction
Remote Control
7. REPLAY Button
This function is used to replay the previous 10 seconds of
a movie from the current position.
8. VOL (+, -) Buttons
19
1
Control volume in TV mode.
9. SKIP Buttons (
/
)
Use to skip the title, chapter or track.
10. STOP Button (
11. SEARCH Buttons (
Allow you to search forward/backward through a disc.
12. DISPLAY Button
Displays the current disc mode.
13. SETUP Button
)
2
3
/
)
20
21
22
23
24
4
5
Brings up the Setup menu.
14. SACD/CD Button
Selects Super Audio CD or CD playback mode.
15. AUDIO Button
6
25
Use this button to access various audio functions on a disc.
16. SUBTITLE Button
17. INDEX Buttons
Use to skip the INDEX in DVD Audio disc.
18. PROGRAM Button
Allows you to program a specific order.
19. ON/STANDBY Button
Turns the power on or off.
20. ENTER Button
21. HDMI Button
7
8
9
26
10
11
12
13
27
28
29
HDMI Output resolution setup.
22. V.OUT Button
30
31
32
14
15
16
Select Video output format.
23. CH (
,
) Buttons
Channel selection in TV mode.
24. MARKER Button
25. SKIP Button
This function skips playback ahead 10 seconds.
17
18
33
34
26. PLAY/PAUSE Button (
Begin/Pause disc play.
27. RETURN Button
)
Returns to a previous menu.
28. MENU/DISC Button
Brings up the DVD player’s menu.
Brings up the Disc menu.
29. ENTER/…†œ √ Buttons
This button functions as a toggle switch.
30. DVD/CARD Button
Use to operate DVD/CARD.
31. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
32. STEP Button
Advances play one frame at a time.
33. PAGE Buttons
1. OPEN/CLOSE ( ) Button
To open and close the disc tray.
2. NUMBER Buttons
3. INPUT Button
Selects Video input connection in TV mode.
4. DVD Button
Press this to operate DVD Player.
5. TV Button
Press this to operate TV. (Go to TV mode.)
6. ZOOM Button
Use to skip the PAGE in DVD Audio disc.
34. CLEAR Button
Use to remove menus or status displays from the screen.
Enlarges picture.
ENG-13
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 14
Connections
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to aTV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
RED
WHITE
YELLOW
Audio Cable
Video Cable
RED
WHITE
YELLOW
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 20 to 22)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the V.OUT button when DVD Player is in stop mode or no disc is inserted, the Video Output
mode changes in the following sequence: (COMPOSITE/S-VIDEO ➝ COMPONENT(I-SCAN) ➝
HDMI/COMPONENT(P-SCAN)
)
If HDMI/COMPONENT(P-SCAN) mode is selected and your TV does not support HDMI or progressive scan,
you cannot see any picture. Press the V.OUT button until the picture can be seen on the screen.
- When the Video Output in Setup menu is set to HDMI/COMPONENT(P-SCAN), the Video and S-Video
Outputs do not work.
ENG-14
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 15
Connections
Connection to aTV (S-Video)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and colour(C) signals to present clearer images than regular video input mode.
(Audio signals are delivered through the audio output.)
1
Using an S-Video cable (not supplied), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
WHITE
RED
3
S-Video Cable
(not supplied)
Audio Cable
Press the input selector on your TV remote control until the
S-Video signal from the DVD player appears on your TV screen.
WHITE
RED
4
Set the Video Output to COMPOSITE/S-VIDEO in the Display
Setup menu. (See pages 64 to 65)
You can use the V.OUT button to change the Video Output
mode. (See page 14)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 20 to 22)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-15
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 16
Connections
Connection to aTV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate colour reproduction images. Component video separates
B
R
the picture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using component video cables (not supplied), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
RED
BLUE
GREEN
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
RED
WHITE
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Audio Cable
Component cable
(not supplied)
RED BLUE GREEN
RED
WHITE
4
Set the Video Output to COMPONENT(I-SCAN) in the Display
Setup menu. (See pages 64 to 65)
You can use the V.OUT button to change the Video Output
mode. (See page 14)
Note
- If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected, the
screen will turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 20 to 22)
R
B
- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P , P , Y”
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-16
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 17
Connections
Connection to aTV (Progressive)
1
Using component video cables (not supplied), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
RED
BLUE
GREEN
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
RED
WHITE
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Audio Cable
Component cable
(not supplied)
RED BLUE GREEN
RED
WHITE
4
Set the Video Output to HDMI/COMPONENT(P-SCAN) in the
Display Setup menu. (See pages 64 to 65)
You can use the V.OUT button to change the Video Output
mode. (See page 14)
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings
in the TV’s menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
ENG-17
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 18
Connections
Connecting to a TV with HDMI Jack
1
Using the HDMI cable, connect the HDMI OUT terminal on the
rear of the DVD player to the HDMI IN terminal of your TV.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
HDMI cable
HDMI VIDEO Specifications
When you press the HDMI button, 576p, 720p and 1080i are selected in order.
The first press of the HDMI button brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate
properly with this DVD player.
- Please refer to the user's manual of your TV.
- If HDMI cable is plugged into TV, the DVD player’s output is set to HDMI within 10 seconds.
- If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.
ENG-18
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 19
Connections
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
• HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the
screen.
• Why does Toshiba use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal
from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via HDMI
from being copied. It provides a secure digital link between a video source (PC, DVD, etc.) and a display
device (TV, Projector, etc.). Content is encrypted at the source device to prevent unauthorized copies from
being made.
ENG-19
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 20
Connections
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN
terminal of your TV as described on pages 14 to 18.
RED
WHITE
3
Audio Cable
Turn on the DVD player, TV, and Amplifier.
RED
WHITE
2-Channel stereo amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 61)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-20
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 21
Connections
Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifer)
1
If using an optical cable (not supplied), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not supplied), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN
terminals of your TV as described on pages 14 to 18.
or
Coaxial Cable
(not supplied)
3
Optical Cable
(not supplied)
Turn on the DVD player, TV, and Amplifier.
Dolby Digital or
DTS amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 61)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
- DVD-AUDIO only plays back two channel audio through the Digital Audio out.
Multi-channel DVD-Audio discs are output through the Analog outputs.
- SACD plays back only through the Analog outputs. (See pages 60 to 61)
ENG-21
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 22
Connections
Connection to a 5.1CH Analog Amplifier
1
If using audio cables for 5.1 CH Analog Amplifier (not supplied)
connect the 5.1CH ANALOG AUDIO OUT terminals on the rear
of the DVD player to the 5.1CH ANALOG AUDIO IN terminals
of the 5.1CH Analog Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN
terminals of your TV as described on pages 14 to 18.
GREEN
GREEN
WHITE
WHITE
BLACK
BLACK
3
Turn on the DVD player, TV, and Amplifier.
5.1ch Analog
Amplifier
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 63)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-22
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 23
Basic Functions
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
-
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen
comes up: If you want to select a language, press a NUMBER button.
Press
Touche
1
2
3
4
5
6
for English
(This screen will only appear when you plug in the player for the first time.) If the
language for the startup screen is not set, the settings may change whenever you turn
the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the
front panel of the unit for more than 5 seconds with no disc in the unit.
pour Français
für Deutsch
Drücken Sie
Pulsar
para Español
per Italiano
Premere
Druk op
button on the
voor Nederlands
Then the SELECT MENU LANGUAGE window appears again where you can reset
your preferred language.
Playback
1
Press the OPEN/CLOSE
(
) button.
The STANDBY indicator
light goes out and the tray
opens.
2
Place a disc gently into the
tray with the disc’s label
facing up.
RESUME function
3
When you stop disc play, the player remembers
where you stopped, so when you press
Press the PLAY/PAUSE (
button or OPEN/CLOSE (
button to close the disc tray.
)
)
PLAY/PAUSE (
) button again, it will pick up
where you left off. (unless the disc is removed
or the player is unplugged, or if you press the
STOP ( ) button twice.)
ENG-23
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 24
Basic Functions
Note
4
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
Stopping Play
Press the STOP ( ) button
during play.
(
) button to resume normal play.
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
5
Removing Disc
Press the OPEN/CLOSE
(
) button.
Screen pauses, no sound.
To resume, press the PLAY/PAUSE (
once again.
) button
6
Pausing Play
Press the PLAY/PAUSE
(
) or STEP button on the
remote control during play.
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
Each time the button is pressed, a new frame
will appear.
No sound is heard during STEP mode.
7
Step Motion Play (Except
CD)
Press the PLAY/PAUSE (
normal play.
) button to resume
Press the STEP button on
the remote control during play.
You can only perform step motion play in the
forward direction.
No sound is heard during slow mode.
8
Press the PLAY/PAUSE (
normal play.
) button to resume
Slow Motion Play (Except
CD)
Reverse slow motion play will not work.
Press the SEARCH (
)
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
Note
This ( ) icon appears when an invalid button is
pressed.
ENG-24
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 25
Basic Functions
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter orTrack
During play, press the SEARCH ( or
and press again to search at a faster speed.
)
button
During play, press the
SEARCH ( or
button on the remote
control for more than 1
second.
)
DVD
VCD
2X, 4X, 8X, 32X, 128X
4X, 8X
CD/SACD/DVD-AUDIO 2X, 4X, 8X
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound is heard during search mode
(Except CD).
Skipping Tracks
During play, press the SKIP
(
or
) button.
- When playing a DVD, if you press the SKIP (
)
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP (
)
button, it moves to the next track. If you press the
SKIP ( ) button, it moves to the beginning of
the track. One more press makes it move to the
beginning of the previous track.
Note
- If a track exceeds 15 minutes when playing a
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
VCD and you press the
forward 5 minutes. If you press the
it moves backward 5 minutes.
button, it moves
button,
ENG-25
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 26
Basic Functions
Using the Display Function
When Playing a DVD/VCD/CD/MPEG4
You can select Info in the function menu by
pressing the MENU button.
1
During play, press the
DISPLAY button on the
remote control.
DVD
2
Press the …/† buttons to
01
select the desired item.
01
0:00:13
ENG 5.1CH
Off
VCD
When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
01
0:00:43
0~9
CD
01
0:00:48
MPEG4
01
0:00:13
MP3 1/8
None
640x272
ENG-26
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 27
Basic Functions
You may use the number buttons on the remote
control to directly access a title, chapter or to
start the playback from a desired time.
3
Press the œ/√ buttons to
make the desired setup and
then press the ENTER
button.
4
To make the screen
disappear, press the
DISPLAY button again.
Note
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
Allows playback of the film from a desired time.You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language.
In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks.
The MP3 and AC3 are supported.(DivX)
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
(DivX)
File Size has a relationship with resolution of a title.
The larger file size is, the higher resolution is displayed.
If the file resolution is small, it scales up automatically. So you can see the larger screen.
ENG-27
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 28
Basic Functions
Using the Disc and Title Menu
Using the Disc Menu (DVD)
1
During the playback of a
DVD disc, press the SETUP
button on the remote
control.
Note
2
- Depending on a disc, the Disc Menu may not
work.
- You can also use the Disc Menu, using the DISC
MENU button on the remote control.
Press the …/† buttons to
select Disc Menu, then
press the √ or ENTER
button.
Press ENTER key
for Disc Menu
Using the Title Menu (DVD)
1
During the playback of a
DVD disc, press the SETUP
button on the remote
control.
2
Press the …/† buttons to
Press ENTER key
forTitle Menu
select Title Menu, then
press the √ or ENTER
button.
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
ENG-28
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 29
Basic Functions
Using the Function Menu
Using the Function Menu (DVD/VCD)
1
Press the SETUP button
during playback.
2
Info
Press the …/† buttons to
Zoom
select Function, then press
Bookmark
the √ or ENTER button.
- Info (See pages 26 to 27)
- Zoom (See page 39)
Repeat
Angle
Front Display : Bright
- Marker
(See pages 37 to 38)
- Repeat (See pages 30 to 31)
- Angle (See page 35)
- Front Display
For Front display, you can
select the brightness of the
display to 3 different modes :
Auto, Bright, Dim.
You can also directly select these functions
using their respective buttons on the remote
control.
3
Press the …/† buttons to
select one of the six
functions. Then press the
√ or ENTER button to
access the function.
Note
- When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
ENG-29
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 30
Basic Functions
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD/CD
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
DVD repeats play by chapter or title, CD and
VCD repeat play by disc or track.
DVD
2
Press the œ/√ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
Chapter ( ): repeats the chapter that is
playing.
Title ( ): repeats the title that is playing.
Disc ( ): repeats the disc that is playing.
Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
REPEAT ENTER
Off
01
01 A-B
T
VCD/CD
REPEAT ENTER
T
D
Off
01
01 A-B
Using the A-B Repeat function
1. Press the REPEAT button on the remote control.
2. Press the œ/√ buttons to Select A-B.
3. Press the ENTER button at the point where you want repeat play to start (A).
B is automatically highlighted.
4. Press the ENTER button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
DVD
3
To return to normal play,
REPEAT ENTER
Off
01
T
01 A-B
press REPEAT button
again, then press the œ/√
buttons to select Off and
press ENTER button.
VCD/CD
Note
REPEAT ENTER
- Depending on a disc, the Repeat function may
Off
T
01
D
01 A-B
not work.
- When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
ENG-30
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 31
Basic Functions
Slow Repeat Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD/VCD
1
During play, press the
PLAY/PAUSE (
) button.
2
Press the SEARCH (
)
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
3
Press the REPEAT button
on the remote control.
Press the œ/√ buttons to
select A-B.
To set A-B REPEAT, set (A) first, then set (B)
after the following slow play time has elapsed:
1/8x: wait 40 seconds, then press B
4
Press the ENTER button at
the point where you want
repeat play to start (A).
B is automatically
1/4x: wait 20 seconds, then press B
1/2x: wait 10 seconds, then press B
highlighted. Press the
ENTER button at the point
where you want the repeat
play to stop (B).
The disc will play from A to B repeatedly at the
speed you chose.
5
To return to normal play,
press the CLEAR button and
then press the PLAY/PAUSE
(
) button.
Note
When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
ENG-31
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 32
Basic Functions
Program Play & Random Play
Program Play (CD)
Program Play allows you to select the order in which you want tracks to play.
1
During play, press the
PROGRAM button.
2
PROGRAM
RANDOM
œ √
Press the œ/√ buttons to
select PROGRAM.
Press the ENTER button.
- To return to the previous menu screen, press
the RETURN button.
- To cancel the selected program order, press
the CLEAR button.
- This unit can support a maximum of 20
programmed tracks.
PROGRAM 01
3
Press the …/†/œ/√ buttons
to select the first track to
add to the program.
Press the ENTER button.
The selection numbers
appear in the Program
Order box.
Track
Program Order
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
4
Press the PLAY/PAUSE
(
) button.
The disc will be played in
programmed order.
Random Play (CD)
Random Play plays a disc's tracks in random order.
1
PROGRAM
RANDOM
œ √
Press the PROGRAM
button.
Note
- Depending on a disc, the Program and Random
Play functions may not work.
- While in playback mode, press the CLEAR button
on the remote control to cancel Program Play or
Random Play.
2
Press the œ/√ buttons to
select RANDOM.
Press the ENTER button.
ENG-32
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-1 8/22/05 4:41 PM Page 33
Advanced Functions
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/CD)
1
Press the AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH
When playing a VCD or CD,
you can select among
Stereo, Right or Left.
VCD/CD
AUDIO
Stereo
2
To remove the AUDIO
icon, press the CLEAR or
RETURN button.
Note
- This function depends on audio languages that
are encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 58.
ENG-33
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 34
Advanced Functions
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD/MPEG4)
1
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
DVD
abbreviations.
SUBTITLE
Off
MPEG4
Press the œ/√ buttons to
select the desired subtitle
language on a MPEG4 then
press the ENTER .
1/1
2
To remove the SUBTITLE
icon, press the CLEAR or
RETURN button.
Note
- Depending on DVDs, you can change desired
subtitle in the Disc Menu. Press the DISC MENU
button.
- This function depends on what subtitles are
encoded on the disc and may not work on all
DVDs.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come up
whenever you play a DVD;
Refer to “Using the Subtitle Language” on page
59.
ENG-34
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 35
Advanced Functions
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the Angle Function (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
1
During play or pause
mode, press the SETUP
button on the remote
control.
2
Info
Press the …/† buttons to
Zoom
select Function, then
Bookmark
press the
button.
√
or ENTER
Repeat
Angle
Front Display : Bright
3
Info
Press the …/† buttons to
Zoom
select Angle, then press
Bookmark
Repeat
the
√
or ENTER button.
Angle
Front Display : Bright
ANGLE
1/6
4
Press the œ/√ button
repeatedly to select the
desired angle. To remove
the ANGLE icon, press
the CLEAR or RETURN
button.
Note
If the disc has only one angle, this feature won’t
work. Currently, very few discs have this
feature.
ENG-35
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 36
Advanced Functions
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
Press the REPLAY button.
- The current scene
moves backward about
10 seconds, and plays
back.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the SKIP button.
- Playback will skip ahead
10 seconds.
Note
Depending on the disc, these functions may not
work.
ENG-36
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 37
Advanced Functions
Using the Marker Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
Using the Marker Function (DVD/VCD)
1
During play, press the
MARKER button on the
remote control.
Using the SETUP button.
During play, press the SETUP
button on the remote control.
Press the …/† buttons to
select Function, then
Info
Zoom
press the
button.
√
or ENTER
Bookmark
Repeat
Angle
Front Display : Bright
Press the …/† buttons to
select Bookmark, then
Info
Zoom
press the
button.
√
or ENTER
Bookmark
Repeat
Angle
Front Display : Bright
2
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
Note
- When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
- Depending on a disc, the Bookmark function may
not work.
ENG-37
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 38
Advanced Functions
Recalling a Marked Scene
1
During play, press the
MARKER button on the
remote control.
2
Press the œ/√ buttons to
select a marked scene.
3
Press the PLAY/PAUSE
(
) button to skip to the
marked scene.
Clearing a Marker
1
During play, press the
MARKER button on the
remote control.
2
Press the œ/√ buttons to
select the bookmark
number you want to delete.
3
Press the CLEAR button
to delete a bookmark
number.
ENG-38
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 39
Advanced Functions
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
1
During play, press the ZOOM
button on the remote control.
Using the SETUP button.
During play or pause mode,
press the SETUP button on
the remote control.
Press the …/† buttons to
select Function, then
Info
press the
button.
√
or ENTER
Zoom
Bookmark
Repeat
Angle
Front Display : Bright
Press the …/† buttons to
Info
select Zoom, then press
Zoom
the
√
or ENTER button.
Bookmark
Repeat
Angle
Front Display : Bright
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
2
Press the …/† or œ/√
buttons to select the part
of the screen you want to
zoom in on.
During VCD play, press ENTER to zoom in
2X/Normal in order.
Note
Press the ENTER button.
When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
ENG-39
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 5:38 PM Page 40
Advanced Functions
How to insert a Memory Card
This unit accepts 11 different types of Memory Cards
Insert the Memory Card correctly with the label facing up, otherwise it may not work.
Playable card
Card Mark Contents
capacity
SD(Secure DigitalTM
memory card
)
32 MB-
1 GB
MMC
8 MB-
1 GB
(MultiMediaCardTM
)
16 MB-
1 GB
xD-Picture card
MP3/
JPEG
files
16 MB-
128 MB
Memory StickTM
128 MB-
2 GB
Memory StickTM (Pro)
CompactFlash®
memory card (Type 1)
8 MB-
4 GB
CompactFlash®
memory card (Type 2)
8 MB-
4 GB
Multi card slot support 11 types of memory cards: Memory Stick, Memory Stick-Pro, Memory Stick Duo, SD,
Mini SD Card and xD-Picture Card, MMC, RS-MMC, Smart Media Card, Compact Flash and Micro Drive.
When cards are inserted in two slots, the card which is inserted first has a priority on playback.
Toshiba is an authorized licensee of the Compact Flash® registered trademark. SD is a trademark of SD
Card Association. MMC and MultiMedia Card are trademarks of Infineon Technologies AG and licensed to
MMCA (MultiMediaCard Association). Memory Stick is a trademark of Sony Corporation.
xD-Picture Card is a trademark of Fuji Photo Film Co., Ltd.
SmartMedia is a trademark of Toshiba Corp.
Micro Drive is a trademark of Hitachi Global Storage Technologies Netherlands B.V.
Note
-
-
-
This device supports xD M series card.
This unit is able to recognize up to a maximum of 1,450 files per card.
If it is not fully inserted, the “Memory Card” will not work. Some memory cards may not be perfomed correctly.
- If you remove the “Memory Card” during Memory Card operation, the recorded data may become
corrupted. It is better to remove it after pressing DVD/CARD button to return to DVD/CD Mode.
- Memory Stick Duo, Mini SD, and RS-MMC must be inserted into a slot using adapter.
But some Memory cards may not be performed correctly depending on the adapter condition.
- Please remove the "Memory Card" and adapter at the same time.
- DVD/CD cannot be played in the Memory Card mode. If you press the DVD/CARD or OPEN/CLOSE button
in M.CARD mode, the system will automatically switch to the DVD/CD mode.
-
-
When pressing the DVD/CARD button to play the disc again, the player doesn’t remember where you stopped.
It takes time to load files according to Memory Card Maker, file size and the number of files.
When playing a Memory Card
1
Insert a Memory Card.
2
Press the DVD/CARD button
on the remote control.
3
Depending on the file type stored on the Memory card,
audio files will be played the same way as MP3 files and
picture files will be played the same way as Picture CD’s
files. (See pages 48 to 54)
ENG-40
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 41
Advanced Functions
DVD AUDIO Playback
1
Open the disc tray.
Place the DVD AUDIO disc on the tray.
- Place the DVD AUDIO disc with the labeled side up.
Close the tray.
- The tray closes and disc plays.
You can select Info in the function menu by
pressing the MENU button.
2
During play, press the
DISPLAY button on the
remote control.
DVD-AUDIO
3
Press the …/† buttons to
01
select the desired item.
01
01
0:00:13
You may use the number buttons on the remote
control to directly access a Group, Track, Page
or to start the playback from the desired time.
4
Press the œ/√ buttons to
make the desired setup and
then press the ENTER
button.
Some DVD-AUDIO discs don’t down-mix audio.
These discs always output 5.1ch analog audio
regardless of audio setup.
5
To make the screen
disappear, press the
DISPLAY button again.
ENG-41
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 42
Advanced Functions
Note
Most DVD AUDIO discs are recorded in Groups.You can change Groups with this Function.
Bonus Group playback.
Some DVD AUDIO discs have Bonus groups. If you want to play a Bonus group, you must enter the
Bonus Group code. The code is usually on the DVD AUDIO disc case.
To access the desired Track when there is more than one on the DVD AUDIO disc.
If pages are included on the DVD-AUDIO disc, you can see this icon.
To access the desired page, you can use this Function.
If a slide show is included on the DVD-AUDIO disc, you can see this icon.
In this case, you cannot use PAGE DOWN/UP buttons.
Slide
If a video zone is included on the DVD-AUDIO disc, you can see this icon.
In this case, you cannot use PAGE DOWN/UP buttons.
V-zone
Allows playback of music from a desired time by using the number buttons.
Page / Index Function
Note
Depending on a disc, this function may not work.
1
Use PAGE DOWN/UP
buttons to Skip the Page
when there is more than one
in a group.
- Some DVD-AUDIO discs
include a slide show. In the
slide show mode, this
function cannot be used.
- PAGE is still images.
You can see the still
images when a DVD-
AUDIO disc is played back.
2
Use INDEX PREV/NEXT
buttons to Skip the Index
when there is more than one
in a track.
ENG-42
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 43
Advanced Functions
REPEAT Play
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
Track ( ): repeats the title that is playing.
Group ( ): repeats the group that is playing.
DVD-AUDIO
2
Press the œ/√ buttons to
Off
01
01
select Track or Group, then
press the ENTER button.
AUDIO Format Display
1
During DVD AUDIO
playback, press the AUDIO
button to see AUDIO Format
information.
- LPCM : Linear Pulse Code Modulation.
Not compressed Audio data format.
- PPCM : Packet Pulse Code Modulation.
Lossless compressed Audio data
format.
DVD-AUDIO
PPCM 5.1CH
Note
Some DVD-AUDIO discs don’t allow audio
down-mixing.
ENG-43
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 44
Advanced Functions
Super Audio CD Playback
Off
1
Open the disc tray.
Place the Super Audio CD disc
on the tray.
- Place the Super Audio CD
disc with the labelled side up.
Close the tray.
- The tray closes and you
should get a screen.
Super Audio CD Clips Menu On Play Function
1
Use the …/† buttons to
select a music title.
If you want to see information about the Disc
title and Artist, press the DISPLAY button.
If you want to convert to regular CD mode,
press the SACD/CD button.
During play or stop mode, you can change the
2CH or MULTI mode by using œ/√ buttons.
(You can use this function when Super Audio
CD disc includes both multi-channel and 2
channel audio format.)
2
Press the ENTER button to
begin playback of the music
title.
- If you want to use the
Repeat Function, press
the REPEAT button to
change the mode, such as
Off, Track, Disc.
* Off : Normal Playback
* Track : Repeats the current
music title.
* Disc : Repeats the music
titles in the Super Audio
CD.
ENG-44
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 45
Advanced Functions
Super Audio CD Clips Menu Off Play Function
1
In Stop mode, press the
DISC MENU button until the
Clips menu is off.
You can select Info in the function menu by
pressing the SETUP button.
2
During play, press the
DISPLAY button on the
remote control.
SACD
3
Press the …/† buttons to
select the desired item.
SACD
01
0:00:13
MULTI
You may use the number buttons on the remote
control to directly access a track and to start the
playback from the desired time.
4
Press the œ/√ buttons to
make the desired setup and
then press the ENTER
button.
5
To make the screen
disappear, press the
DISPLAY button again.
ENG-45
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 46
Advanced Functions
CD Layer Play Function
Note
- Some Super Audio CD discs do not include a CD
layer.
1
01
During Super Audio CD
0:00:13
playback, press the
- Depending on a disc, this function may not work.
SACD/CD button to playback
the CD layer of a dual layer
Super Audio CD disc.
(Refer to the page 26 for
setting CD playback
- Super Audio CD, SA-CD and their logos are
trademaks of Sony and Philips.
Function).
Note
(SACD)
To access the desired Track when there is more than one in the disc.
(SACD)
Allows playback from a desired time by using the number buttons.
(SACD)
If you want to change the 2 channel or multi-channel mode in play or stop mode, press AUDIO
button.
- You can use this function when the Super Audio CD disc includes multi-channel and 2 channel
audio format.
• 2CH : L, R
• MULTI : F/L, F/R, R/L, R/R, C/T, S/W
(CD)
To access the desired Track when there is more than one in the disc.
(CD)
Allows playback from a desired time.You must enter the starting time as a reference.
ENG-46
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 47
Advanced Functions
Clips Menu for MP3/JPEG/MPEG4
Discs with MP3/JPEG/MPEG4 contain individual songs and/or pictures that can be
organized into folders as shown below. They are similar to how you use your
computer to put files into different folders.
Open the disc tray.
Off
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
RO OT
RO OT
J P E G
M P 3
M P E G 4
Parent Folder, Current Folder Folders and Files in
and Peer Folders
Current Folder
-
-
-
: Current playing file name.
-
-
-
-
-
: MP3 file icon.
: JPEG file icon.
: AVI file icon.
: Current Playback Time.
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
: Folder icon.
- Off: Normal Playback
: Current Folder icon.
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
Folder Selection
The folder can only be selected in the Stop mode.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the …/† buttons to select “..” and
press ENTER to go to the parent folder.
Root
JPEG
- To select the Peer Folder
MP3
Parent Folder
Press the œ/√ buttons to highlight the left window.
Press the …/† buttons to select the desired folder,
then press ENTER.
MUSIC
Current Folder
Sub-Folders
- To select the Sub-Folder
1st
Press the œ/√ buttons to highlight the right window.
Press the …/† buttons to select the desired folder,
then press ENTER.
2nd
SONG FILE 1
SONG FILE 2
Peer Folders
SONG FILE 3
ENG-47
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 48
Advanced Functions
MP3 Playback
Off
1
Open the disc tray.
RO OT
RO OT
J P E G
M P 3
Place the disc on the tray.
Close the tray.
M P E G 4
2
Press the …/† or œ/√
buttons to select a song
file.
Press ENTER to begin
playback of the song file.
Off
00:00:23
B e c a u s e Yo u
RO OT
. .
B e c a u s e Yo u
J P E G
M P 3
C a c t u s
S a d D ay u
M P E G 4
Wo n d e r f u l
Note
- Depending on the recording method, some MP3 CD-Rs may not be played.
- It is impossible to write MP3 or JPEG files to a Memory Card in this unit as it is read-only.
- Only MP3 Format files with the “ .mp3” extensions can be played.
Repeat/Random playback
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
To resume normal play, press the CLEAR button.
ENG-48
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 49
Advanced Functions
MP3 file
When you record MP3 file on CD-R/Memory Card, please refer to the following.
-Your MP3 files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 file are compatible with
Microsoft's DOS and Windows, and with Apple's Mac.
This format is the most widely used. Memory Card over
4GB use FAT32, which may not be compatible with this unit.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality.You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- When naming your MP3 file, do not exceed 8 characters,
and enter “.mp3” as the file extension.
General name format : Title.mp3. When composing your
title, make sure that you use 8 characters or less, have no
spaces in the name, and avoid the use of special characters
including: (.,/,\,=,+).
- This unit can play a maximum of 3000 files and 300 folders
per disc.
- This DVD player requires discs/recordings to meet certain
technical standards in order to achieve optimal playback
quality. Pre-recorded DVDs are automatically set to these
standards. There are many different types of recordable
disc formats (including CD-R containing MP3 file).
Because this area of technology is still evolving, Toshiba
cannot guarantee that all recordable discs will produce
optimal playback quality. The technical criteria set forth in
this owner's manual are meant only as a guide.
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that is
conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
- Please be advised that you must obtain permission from
the applicable copyright owners to download copyrighted
content, including music files, in any format, including the
MP3 format, prior to the downloading thereof. Toshiba has
no right to grant and does not grant permission top
download any copyrighted content.
- Use a sampling rate of at least 32Khz and up to 48Khz.
Conversely, files will not be played properly and may be
skipped.
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of Microsoft
Inc) and SDMITM (registered trade mark of The SDMI
Foundation).You cannot copy such files.
ENG-49
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 50
Advanced Functions
MPEG4 Playback
MPEG4 Play Function
AVI files are used to contain the audio and video data.
Only AVI format files with the “.avi” extensions can be played.
Off
1
Open the disc tray.
RO
O
T
R
O
OT
J P E G
Place the disc on the tray.
Close the tray.
M P 3
M P E G 4
2
Press the …/† or œ/√
buttons to select an avi file
(DivX/XviD), then press the
ENTER button.
Off
RO OT
. .
J P E G
M P 3
M P E G 4
Repeat Playback
1
Press the REPEAT button
to change playback mode.
There are 4 modes, such
as Off, Folder, Title and
A-B (a distance between
two points appointed by
user).
- Folder : Repeats the AVI files which have the same extension
in the current folder.
- Title : repeats the title that is playing.
- A-B : repeats a segment of the file that you select.
ENG-50
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 51
Advanced Functions
MPEG4 Function Description
CD-R AVI file
Function
Skip
Description
Reference page
-
This unit can play the following video compression formats
within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG4 Simple Profile)
- DivX 5 contents (MPEG4 simple profile plus additional
features such as bi-directional frames. Qpel and GMC are
also supported.)
During play, press the
button, it moves forward
or backward 5 minutes.
or
(
or
)
)
During play, press the SEARCH
(
or
) button and press
Search
or
again to search at a faster
speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
-
(
Allows you to search at a
slower speed in an AVI file.
(1/8X, 1/4X, 1/2X)
This unit supports all resolutions up to maximum below.
Slow Motion
Play
P 24
DivX3.11 & DivX4 & XviD
Bitrate may fluctuate:
DivX5
Each time the STEP button
is pressed, a new frame will
appear.
Step Motion
Play
720 x 480 @30fps
P 24
P 39
Device may skip decoding 720 x 576 @25fps
the high bitrate portions
and begin decoding again
when Bitrate returns to
normal.
: Maximum bitrate : 4Mbps
2X/4X/2X/Normal in order
ZOOM
- These functions may not work depending on MPEG4 file.
Note
- Some MPEG4 files created on a personal computer may not be played properly.
That is why Codec Type, Version and Higher resolution over specification is not supported.
- This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
- This unit supports DivX Subtitle file formats such as .SMI, .SUB, .SRT, .SSA, .ASS, .PSB, and .TXT.
ENG-51
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 52
Advanced Functions
Picture CD Playback
Off
1
Select the desired folder.
RO OT
RO OT
J P E G
M P 3
M P E G 4
Off
2
Press the …/† buttons to
select a Picture file in the
clips menu and then press
the ENTER button.
RO OT
J P E G
M P 3
. .
1
2
3
M P E G 4
3
ENTER RETURN
Note
Press the DISPLAY button
to display the menu.
Press the œ/√ buttons to
select the menu you want
to view, then press the
ENTER button.
- If no button on the remote control is pressed in
about 10 seconds, the menu will disappear.
- Press the STOP button to return to the clips
menu.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Album Screen
Slide Show
•
: Returns to the Album Screen.
ENTER RETURN
TIMER:
• To see the next six pictures, press the
button.
button.
• To see the previous six pictures, press the
Rotation
•
: The unit enters slide show mode.
:Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
• Before the Slide Show begins, the picture interval must be
set. Press the œ/√ buttons to select a desired icon, then
press the ENTER button.
Zoom
: Press the …/† or œ/√ buttons to select the
part of the screen you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 4X. (2X ▼ 4X ▼ 2X ▼ Normal)
•
•
•
: The pictures change automatically with about a 6
second interval.
: The pictures change automatically with
about a 12 second interval.
: The pictures change automatically with
about a 18 second interval.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
ENG-52
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 53
Advanced Functions
Picture CD Playback for HD-JPEG
Must connect to HDMI. Resolution should be 720p or 1080i, and HD-JPEG should be
in HD mode. (See page 64 to 66)
Note
HDMI SETUP
- Only available in HDMI/COMPONENT(P-SCAN)
output.
1
Resolution setting
Resolution
Format
: Auto
Set the HD-JPEG to HD from
Setup menu.
: 1080i
: RGB-Normal
: SD
HD-JPEG
(See page 64 to 66)
To exit the setup menu, press the SETUP
button.
Off
2
Select the desired folder.
RO OT
RO OT
J P E G
M P 3
M P E G 4
Press the STOP ( ) button to return to the
clips menu.
Off
3
Press the …/† buttons to
select a Picture file in the
clips menu and then press
the ENTER button.
When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
RO OT
J P E G
M P 3
. .
1
2
3
M P E G 4
Skip Picture
Press the
or
button to select previous
or next picture.
Note
- Depending on a file size, the amount of time
between each picture may be different from the set
interval time.
Slide Show
Press the the
PLAY/PAUSE(
button to start SLIDE
function.
)
- Album Screen, Zoom, and Info functions are not
available when displaying images in HD-JPEG
mode.
- OSD (On Screen Display) messages are not
displayed when displaying images in HD-JPEG
mode.
Press the the
PLAY/PAUSE(
button again at this time
to stop SLIDE function.
)
- The image may be displayed at a smaller size
depending on the picture size when displaying
images in HD-JPEG mode.
ENG-53
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 54
Advanced Functions
JPEG Discs
When playing a CD-R/Memory Card/Picture CD
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer time to start play and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- Some memory cards may not be perfomed correctly.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters (. / =
+).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc
can be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.
- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
ENG-54
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 55
Changing Setup Menu
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level or even adjust the player to the type of television screen you
have.
1
With the unit in Stop
Language Setup
Audio Setup
√
√
√
√
√
mode, press the SETUP
button on the remote
control.
Display Setup
Parental Setup :
DivX(R) Registration
Setup
Press the …/† buttons to
select Setup, then press
the
√
or ENTER button.
Œ
´
ˇ
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options.
Display Setup : Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
¨
ˆ
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc.
DivX(R) Registration : Please use the Registration code to register this player with the DivX(R)
2
Press the …/† buttons to
access the different
features. Press the
√
or
ENTER button to access
the sub features.
3
To make the setup screen
disappear after setting up,
press the SETUP button
again.
Note
- Depending on the disc, some Setup menu
selections may not work.
ENG-55
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 56
Changing Setup Menu
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
√
√
√
√
Press the …/† buttons to
select Player Menu, then
Subtitle
press the
button.
√
or ENTER
- The language is selected and the screen
returns to Language Setup menu.
PLAYER MENU LANGUAGE
5
Player Menu
English
Press the …/† buttons to
select the desired
- To exit the setup menu, press the SETUP
button.
Français
Deutsch
Español
Italiano
language, then press the
Nederlands
√
or ENTER button.
ENG-56
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 57
Changing Setup Menu
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
√
√
√
√
Press the …/† buttons to
select Disc Menu, then
Subtitle
press the
button.
√
or ENTER
- Select “Others” if the language you want is
not listed.
DISC MENU LANGUAGE
5
English
Français
Deutsch
Español
Italiano
Press the …/† buttons to
select the desired
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
Disc Menu
language, then press the
√
or ENTER button.
Nederlands
Others
- The language is selected and the screen
returns to Language Setup menu.
- To exit the setup menu, press the SETUP
button.
ENG-57
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 58
Changing Setup Menu
Using the Audio Language
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
√
√
√
√
√
Press the …/† buttons to
Audio Setup
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
√
√
√
√
Press the …/† buttons to
select Audio, then press
Subtitle
the
√
or ENTER button.
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
AUDIO LANGUAGE
5
English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
Press the …/† buttons to
select the desired
Audio
- Select “Others” if the language you want is not
listed.
language, then press the
√
or ENTER button.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To exit the setup menu, press the SETUP
button.
ENG-58
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 59
Changing Setup Menu
Using the Subtitle Language
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
√
√
√
√
Press the …/† buttons to
select Subtitle, then press
Subtitle
the
√
or ENTER button.
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
SUBTITLE LANGUAGE
5
Automatic
English
Français
Deutsch
Español
Italiano
Press the …/† buttons to
select the desired
- Select “Others” if the language you want is not
listed. Some discs may not contain the
language you select as your initial language;
in that case the disc will use its original
language setting.
Subtitle
language, then press the
√
or ENTER button.
Nederlands
Others
- The language is selected and the screen
returns to setup menu.
- To exit the setup menu, press the SETUP
button.
ENG-59
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 60
Changing Setup Menu
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Audio Setup, then
press the
button.
Display Setup
√
or ENTER
Parental Setup :
DivX(R) Registration
Setup
To exit the setup menu, press the SETUP
button.
AUDIO SETUP
4
Dolby/DTS Digital Out
MPEG-2 Digital Out
Dynamic Compression
PCM Down Sampling
Speaker Setup
:
:
:
:
PCM
PCM
On
Press the …/† buttons to
select the desired item,
then press the
On
√
or
√
ENTER button.
ENG-60
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 61
Changing Setup Menu
Œ
´
Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the Digital Audio Output.
ˇ
¨
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Note
Even when PCM Down Sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
ˆ
Speaker Setup (See pages 62~63)
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital or DTS),
you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down Sampling to On.
- SACD audio is only available through the analog outputs. It is not possible to output SACD
audio via the HDMI output or Digital Audio Output.
Note
• To exit the setup menu, press the SETUP button.
• DVD-AUDIO
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not down-mix, so they will not output 2 channel digital audio.
- MULTI channel DVD-AUDIO discs playback through the analog outputs.
• Super Audio CD
- Outputs analog signals only.
- Super Audio CD audio is only available through the analog outputs.
It is not possible to output Super Audio CD audio via the HDMI output or Digital Audio Output.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
ENG-61
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 62
Changing Setup Menu
Surround Sound Speaker Setup
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
√
√
√
√
√
Press the …/† buttons to
Audio Setup
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Audio Setup, then
press the
button.
Display Setup
√
or ENTER
Parental Setup :
DivX(R) Registration
Setup
AUDIO SETUP
4
Dolby/DTS Digital Out
MPEG-2 Digital Out
Dynamic Compression
PCM Down Sampling
Speaker Setup
:
:
:
:
PCM
PCM
On
Press the …/† buttons to
select Speaker Setup,
then press the
On
√
or
√
ENTER button.
To exit the setup menu, press the SETUP
button.
SPEAKER SETUP
5
C
Small
LFE
On
L
R
Press the …/†/œ/√
buttons to select the
desired item, then press
the ENTER button to set
the speaker.
Small
Small
Small
Small
SR
User
Test
SL
ENG-62
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 63
Changing Setup Menu
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND SL, SR (Small).
Select the size of the speakers to be connected.
Œ
Front (FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the surround sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the speaker from the subwoofer.
´
Center
- None: If you do not connect a center speaker, select this.
- Large: Normally select this.
- Small: When the sound distorts, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the center speaker from other speakers.
ˇ
Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Normally select either of these according to the rear speaker’s position.
- Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear,
select either of these according to the rear speaker’s position.
This activates the Dolby Digital bass redirection circuitry and outputs the
bass frequencies of the rear speaker from other speakers.
Setting up Test
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
FRONT(L) ▼▼CENTER ▼▼SUBWOOFER ▼▼FRONT(R) ▼▼SURROUND(R) ▼▼SURROUND(L)
Note
To make the Setup menu disappear or return to menu screen during set up, press RETURN or
œ
button.
• The subwoofer test output signal is lower than the other speakers.
• The MPEG Multi-channel logo is a trademark registered by PHILIPS Corporation.
• If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically.
ENG-63
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 64
Changing Setup Menu
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Display Setup,
then press the
ENTER button.
Display Setup
Parental Setup :
DivX(R) Registration
√
or
Setup
To exit the setup menu, press the SETUP
button.
DISPLAY SETUP
4
TV Aspect
Still Mode
: 4 : 3 L-Box
: Auto
√
Press the …/† buttons to
Screen Messages : On
select the desired item,
then press the
ENTER button.
Black Level
TV System
Video Output
HDMI
: Off
√
or
: PAL
:
COMPOSIT/S-VID
√
√
: 480p
ENG-64
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/23/05 4:47 PM Page 65
Changing Setup Menu
ΠTV Aspect
2. PAL Disc : In case of using PAL disc
Depending on the type of television you have,
you may want to adjust the screen setting
(aspect ratio).
• If your TV system only has NTSC-Video
input, you must choose “NTSC Output”.
• If your TV system only has PAL input, you
must choose “PAL Output”.
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
Ø Video Output
Select Video Output.
- COMPOSITE/S-VIDEO : Select when you
want to use Video and S-Video Out.
- COMPONENT(I-SCAN) : Select when you
want to use Video and Component
- 4:3 Pan & Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
525i(480i)/625i(576i) (Interlace) Out.
- 16:9 Wide :You can view the full 16:9
picture on your wide screen TV.
- HDMI/COMPONENT(P-SCAN) : Select
when you want to use Component
525p(480p)/625p(576p) (Progressive) Out
or HDMI.
TV ASPECT
4:3 Letter Box
4:3 Pan&Scan
16:9 Wide
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
• Video Output mode can also be changed
in the following sequence in no disc mode
by pressing the V.OUT button.
COMPOSITE/S-VIDEO ➝ COMPONENT(I-SCAN)
HDMI/COMPONENT(P-SCAN)
´ Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically converted.
- Field : Select this feature when the screen
shakes in the Auto mode.
- Frame : Select this feature when you want
to see small letters more clearly in the Auto
mode.
If HDMI/COMPONENT(P-SCAN) mode is
selected and your TV does not support
HDMI or progressive scan, you cannot see
any picture. Press the V.OUT button until
the picture can be seen on the screen.
DISPLAY SETUP
TV Aspect
Still Mode
: 4 : 3 L-Box
: Auto
√
ˇ Screen Messages
Screen Messages : On
Black Level
TV System
Video Output
HDMI
: Off
Use to turn on-screen messages On or Off.
: PAL
:
COMPOSIT/S-VID
√
√
: 480p
¨ Black Level
Adjusts the brightness of the screen.(On or
Off) It does not function in Progressive mode.
DISPLAY SETUP
COMPOSITE/S-VIDEO
COMPONENT(I-SCAN)
ˆ TV System
1. NTSC Disc : In case of using NTSC disc
HDMI/COMPONENT(P-SCAN)
• If your TV system only has PAL-Video
input, you must choose “PAL”. When you
choose “PAL”, Interlace output format is
PAL 60 Hz output or Component (I-Scan)
480i.
• If your TV system only has NTSC input,
you must choose “NTSC Output”.
ENG-65
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 66
Changing Setup Menu
Ø HDMI
This setting can only be used when the unit is
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
connected by HDMI to Display devices (TV,
Projector, etc.), otherwise the HDMI setting
cannot be selected.
- Resolution setting
•
•
Auto : Resolution setting automatically
Manual : Resolution setting manually
• If Video Output is set incorrectly, the
screen may be blocked.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you set the HDMI output resolution 720p
or 1080i, HDMI output provides better
picture quality.
• No sound will be output from the HDMI
cable if the Dolby/DTS Digital Out is not
set to PCM.
- Resolution
•
•
•
480p/576p : 720X480, 720X576
720p : 1280 x 720
1080i : 1920 x 1080
- Format
You can use this function to set HDMI
output's digital data RGB range.
•
•
•
•
RGB-Normal : HDMI Limited range RGB
data output.
RGB-Expand : HDMI Full range RGB data
output.
YCbCr-(4:4:4) : HDMI Limited range
YCbCr-(4:4:4) output.
YCbCr-(4:2:2) : HDMI Limited range
YCbCr-(4:2:2) output.
Limited range - Black/White and colour level
displayed within Limited data range.
When the bit depth is 8 bits
- Y : 16~235 - levels of brightness
- CbCr : 16~240 - levels of colour
Full range - Black/White and colour level are
expressed within full data range.
When the bit depth is 8 bits
- Y : 0~255 - levels of brightness
- CbCr : 0~255 - levels of colour
- HD-JPEG
•
HD : High Definition image source
- Available when resolution is 720p or
1080i in HDMI enabled.
•
SD : Standard Definition image source
HDMI SETUP
Resolution Setting
Resolution
Format
: Auto
: 1080i
: RGB-Normal
: SD
HD-JPEG
ENG-66
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 67
Changing Setup Menu
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
Press the …/† buttons to
√
√
√
√
select Parental Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
PARENTAL SETUP
: No
4
Press the
√
or ENTER
Use Password
button to select Yes if you
want to use a password.
The Enter Password
screen appears.
To exit the setup menu, press the SETUP
button.
CREATE PASSWORD
5
Enter your password.
The Re-enter Password
screen appears to confirm
the password. Enter your
password again.
Enter Password
- - - -
The player is locked ( ).
CREATE PASSWORD
Re-enter Password
- - - -
ENG-67
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 68
Changing Setup Menu
Setting Up the Rating Level
1
With the unit in Stop
mode, press the SETUP
button.
Press the …/† buttons to
select Setup, then press
the
√
or ENTER button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Parental Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
PASSWORD CHECK
3
Enter your password.
Enter Password
- - - -
PARENTAL SETUP
: Yes
4
Use Password
Rating Level
Press the …/† buttons to
select Rating Level, then
: 8
√
√
Change Password
press the
button.
√
or ENTER
To exit the setup menu, press the SETUP
button.
RATING LEVEL
5
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Press the …/† buttons to
select the Rating Level
you want, then press the
For example, if you select up to Level 6, discs
that contain Level 7 and 8 will not play.
Level 3
√
or ENTER button.
Level 2
Level 1 Kids Safe
e.g.) Setting up in Level 6.
If the DVD disc has been designed to
temporarily cancel the Rating Level, the screen
which follows the “PLAY” screen will change
depending on which disc is played.
If you select “Yes” with the ENTER button,
‘Enter Password” screen will appear.
Input the 4-digit password as you have set at
step 4 page 67 and playback will start.
If “No” is selected, press the OPEN/CLOSE to
remove the disc.
6
Press the OPEN/CLOSE
to activate Parental control
setting.
ENG-68
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 69
Changing Setup Menu
Changing the Password
1
With the unit in Stop
mode, press the SETUP
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
Press the …/† buttons to
√
√
√
√
select Parental Setup,
then press the
ENTER button.
The Enter Password
screen appears.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
Enter your password.
To exit the setup menu, press the SETUP
button.
PARENTAL SETUP
: Yes
4
Use Password
Rating Level
Press the …/† button to
select Change Password,
: 8
√
√
Change Password
then press the
√
or
ENTER button.
Enter your new password.
Re-enter the new
password again.
CHANGE PASSWORD
Enter New Password
- - - -
CHANGE PASSWORD
Re-enter Password
- - - -
Note
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting on page 72.
ENG-69
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 70
Reference
Controlling a TV with the Remote Control
The remote control can be compatible with various brands of TV by setting their
control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs.
Setting Control Codes
1. Press TV to set the remote control operating your TV.
2. While holding down PROGRAM button, enter the four diglts of your TV’s brand code (listed right)
using number buttons.
3. Release PROGRAM.
4. Point the remote control at your TV and use each button listed below to make sure your TV is
operated correctly.
ON/STANDBY
To turn the TV on or off.
CH
To select TV channels in the upper or lower direction.
VOL
To adjust the sound level.
INPUT
To select an external source such as a VCR.
DISPLAY
To turn on or off TV’s screen display.
ENTER
To use for the TV’s ENTER key.
ENG-70
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 71
Reference
Table of Brand Codes
Brand name
TOSHIBA
AIWA
Brand code
0001 0071 0211 0571
0921
Brand name
ORION
Brand code
0001 0191 0231 0361 0411 0441 0451
0501 0551 0611
AKAI
BAIRD
BANG &OLUFSEN
BEKO
0201 0241 0311 0431 0501 0521 0641
0171 0241
0471
0371 0501 0511 0531 0761 0841 0911
1061
0071 0111 0181 0201 0271 0301 0461
0501 0651
PANASONIC
PHILCO
0181
BLAUPUNKT
BRIONVEGA
BUSH 0071
CROWN
0071 0321 0331
0461 0471 0651
0501 0551 0571
0111 0131 0411 0491 0501 0661
0501
0071 0191 0221 0461 0471 0501 0591
0611 0651
0381 0431 0501 0831 1051
PHILIPS
PIONEER
PROSCAN-THOMSON 0971 1041 0201 0501
DANSAI
RCA
0971 1071 1081 1091 0201 1041 0501
DEAWOO
DECCA
0401 0411 0501
0631 1001 1011 1021 1031 0851 0201
0501 0481 0321 0331 0501 0651 0771
0281 0351 0381 0421 0431 0471 0541
0641 0651 0661 0671
REALISTIC
0091 0141 0171 0441 0451 0501
0031 0071 0131 0191 0291 0311 0381
0541 0601
FERGUSON
SABA
0021 0041 0071 0081 0091 0111 0271
0281 0291 0301 0341 0471
0041 0121 0181 0201 0281 0471 0571
0651
0001 0191 0481 0491 0891
0171 0221
SAISHO
SALORA
0231 0411 0441 0451 0551
0231 0241 0351
FINLUX
FISHER
0171 0181 0251 0281 0411 0491 0501
0631 0661 0791 1101 1111
0021 0041 0081 0121 0171 0181 0201
0231 0241 0451 0571 0651 0671 0701
0711 0721
0011 0051 0061 0281 0461 0501 0581
0591
0091 0121 0151
0031 0051 0061 0351 0501 0561
0851 0511 0571 0201 0501
0071 0321 0331 0571 0631
0091 0471 0651
0001 0091 0101 0131 0191 0231 0361
0471 0501 0551 0581 0651
0441 0451 0571 0681
0041 0301 0351 0431 0461 0571 0651
0091 0141 0171 0441 0451 0501
0371 0501 0511 0531 0761 0841 0911
1061
SAMSUNG
FUNAI
GEC
SANYO
GOLDSTAR
GOODMANS
GRANADA
GRUNDIG
HINARI
0201 0251 0281 0411 0501
0171 0281 0501 0571
0171 0241 0271 0501 0571 0651 0671
0011 0071 0271 0321 0331
0241 0411 0571 0631
0021 0221 0251 0351 0371 0381 0431
0571 0641 0751
0171 0281 0411 0501 0631 0661
0231 0241 0261 0271 0401 0611
0231 0241 0261 0271 0401 0611
0311 0431 0521 0571
0471 0501 0571 0651
0241 0261 0271 0281 0351
0501 0071 0191 0221 0461 0471 0591
0611 0651
SCHNEIDER
SEG
SELECO
SHARP
SIEMENS
SINGER
HITACHI
INNO HIT
ITT
ITT-NOKIA
JVC
LOEWE OPTA
LUXOR
SINUDYNE
SONY
TANDBERG
TATUNG
MAGNAVOX
TECHNICS
MARANTZ
MATSUI
0201 0501
0001 0171 0191 0231 0411 0441 0451
0501 0551 0571
0071 0281 0381 0421 0431 0521 0601
0621 0671
0041
TELEFUNKEN
TENSAI
METZ
0041 0331 0361 0461 0471 0651
0201 0321 0331 0451 0501 0511 0571
0651 0771
0371 0501 0511 0531 0761 0841 0911
1061
0231 0241 0261 0271 0401 0611
0281 0351 0381 0421 0431 0461 0521
0541 0641 0671
0281 0351 0371 0381 0391 0421 0461
0521 0541 0641 0971 1041
0041 0071 0281 0291 0341 0421 0491
0601 0671
0021 0491
0201 0501 0321 0331 0451 0511 0571
0651 0771
THOMSON
MITSUBISHI
THORN
NATIONAL
UNIVERSUM
YAMAHA
NOKIA
NORDMENDE
ZANUSSI
ZENITH
0031 0051 0061 0351 0501 0561
0931
OCEANIC
0481
Note
• Some TV’s may not respond to all the operations above, or may not be operated at all with this remote
control. In this case, operate your TV with its own remote control.
• For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work
on your TV.
• If you replace the remote control’s batteries, set the brand code again.
ENG-71
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 72
Reference
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Action
Problem
Page
• Check the batteries in the remote control.
No operations can be
performed with the
remote control.
They may need replacing.
• Operate the remote control at a distance of not more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Re-install
batteries and try to operate the remote control again.
P6
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
P10, 23
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier.
2) The disc is recorded with 5.1 channel sound.
5.1 channel sound is
not being reproduced.
P22
• Check whether the disc being played has the “5.1 ch” marked on the outside.
• Check if your audio system is connected and worked properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P60~61
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4.You’ve requested a title or chapter number or search time that is out of range.
The
icon appears
on screen.
–
Disc Menu doesn’t appear. • Check if the disc has a Menu.
–
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
P55~69
The screen ratio
• The Screen Ratio is fixed on your DVDs.
P64~65
P60~63
cannot be changed.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
No audio.
The screen is blocked.
• Press the
button for more than 5 seconds under no disc inside.
P23, 66
P67~69
All settings will revert to the factory settings.
• Press and hold the
All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
button for more than 5 seconds under no disc inside.
Forgot password.
If you experience other
problems.
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
–
• If the problem still cannot be solved, please contact your nearest authorized
service center.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
The picture is noisy or
distorted.
P9
P65
• Make sure the correct video output setting is selected in this unit.
No picture or
abnormal colour
(pinkish, greenish etc,)
• Make sure the video outputs are connected correctly.
P14~18
ENG-72
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 73
Reference
Action
Problem
Page
P18~19, P66
P18~19
No HDMI output.
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 480p/720p/1080i DVD player.
• If snow noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
Abnormal HDMI output
screen.
HDMI output jitters.
• Check your TV system setup.
• If the screen jitters, phenomenon may occur when frame rate is converted
from 50Hz to 60Hz for 720P/1080i HDMI (High Definition Multimedia Interface)
Output.
P64~66
P66
• Please refer to the user’s manual of your TV.
No Component video
outputs in JPEG
playback.
• Select SD in HDMI menu if you need to view both HDMI and component out in
parallel.
ENG-73
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 74
Reference
Specifications
Power Requirements
Power Consumption
Weight
AC 110-240V 60/50Hz
14 W
5.1 lbs
General
Dimensions
16.9 (W) x 9.8 (D) x 1.9 (H) inches
+41°F to +95°F
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
DVD
(DIGITAL VERSATILE DISC)
CD : 31/2"
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Disc
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
VCD : 31/2"
Composite Video
1 channel : 1.0 Vp-p (75
Y : 1.0 Vp-p (75 load)
load)
load)
Ω
load)
Ω
Pr : 0.70 Vp-p (75
Pb : 0.70 Vp-p (75
Ω
Ω
Component Video
Video
Output
Luminance Signal : 1.0 Vp-p (75
Chrominance Signal : 0.3 Vp-p (75
576p, 720p, 1080i
Ω
load)
Ω load)
S-Video
HDMI
2 Channel
L(1/L), R(2/R)
5.1 Channel
F/L, F/R, R/L, R/R, C/T, S/W
Optical/Coaxial
Digital Audio Output
Audio
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*Frequency Response
Output
*S/N Ratio
110 dB
100 dB
0.004 %
*Dynamic Range
*Total Harmonic Distortion
*: Nominal specification
- Designs and specifications are subject to change without notice.
- This model complies with the above specifications.
- This model may not be compatible with features and/or specifications that may be
added in the future.
ENG-74
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 75
Memo
ENG-75
Download from Www.Somanuals.com. All Manuals Search And Download.
00873A-SD-6980SY-Cover 8/22/05 4:42 PM Page 2
SmartMedia is a trademark of Toshiba Corp.
Toshiba is an authorized licensee of the Compact Flash® registered
trademark.
SD is a trademark of SD Card Association.
MMC and MultiMedia Card are trademarks of Infineon Technologies
AG and licensed to MMCA (MultiMediaCard Association).
Memory Stick is a trademark of Sony Corporation.
AK68-00873A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|