Toshiba DVD Player SD 4960SU User Manual

Toshiba-SD-4960-Cover(gb) 5/19/04 10:49 AM Page 2  
Setup  
Connections  
2
11  
13  
18  
27  
34  
Basic Functions  
DVD Player  
SD-4960SU  
Instruction Manual  
Advanced Functions  
Changing Setup menu  
Reference  
AK68-00479B  
© 2004 Toshiba Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 2  
Important Safety Instructions  
Precautions  
1) Read these instructions.  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE  
THE COVER(OR BACK).  
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
This symbol indicates “dangerous volt-  
age” inside the product that presents a  
risk of electric shock or personal injury.  
This symbol indicates important  
instructions accompanying the  
product.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including  
amplifiers) that produce heat.  
Do not install this equipment in a confined space such as a bookcase or similar unit.  
WARNING : To prevent damage which may result in fire or electric shock hazard, do not  
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your  
outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with cart, stand, tripod, bracket, or table specified by the manufactur-  
er, or sold with the apparatus.  
expose this appliance to rain or moisture.  
CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN  
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.  
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.  
CAUTIONS  
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.  
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne corre-  
spondante de la prise et pousser jusqu au fond.  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to  
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televi-  
sions, use shielded cables and connectors for connections.  
13) Unplug this apparatus. When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip-over.  
FCC NOTE (for U.S.A):  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-  
ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,  
if not installed and used in accordance with the instructions, may cause harmful interference to radio or televi-  
sion reception, which can be determined by turning the equipment off and on.  
The user is encouraged to try to correct the interference by one or more of the following measures.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This class B digital apparatus meets all requirements of the Canadian Interference --  
Causing Equipment Regulations  
.
CLASS 1  
LASER PRODUCT  
KLASSE 1 LASER PRODUKT  
LUOKAN 1 LASER LAITE  
KLASS 1  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
ENG-2  
ENG-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 4  
Precautions  
Before you start  
Table of Contents  
Setup  
CAUTION  
Accessories  
Important Safety Instructions . . . . . . . . . . . . . .2  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Before you start . . . . . . . . . . . . . . . . . . . . . . . .5  
General Features . . . . . . . . . . . . . . . . . . . . . . .6  
Disc Type and Characteristics . . . . . . . . . . . . .7  
Description-Front Panel . . . . . . . . . . . . . . . . . .8  
Display Indicators . . . . . . . . . . . . . . . . . . . . . .8  
Description-Rear Panel . . . . . . . . . . . . . . . . . .9  
Tour of the Remote Control . . . . . . . . . . . . . .10  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFOR-  
MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-  
ARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
Note:  
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.  
• This DVD player is designed and manufactured to respond to the Region Management Information.  
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,  
the DVD player cannot play the disc.  
• This device is protected by U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and  
6,516,132. This product incorporates copyright protection technology that is protected by U.S. patents  
and other intellectual property rights. Use of this copyright protection technology must be authorized  
by Macrovision, and is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Batteries for  
Remote Control  
(AAA Size)  
Remote Control  
(AH59-00024B)  
Connections  
Choosing a Connection . . . . . . . . . . . . . . . . .11  
(AC43-12002H)  
Basic Functions  
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .13  
Using the Search & Skip Functions . . . . . . . .14  
Using the Display Function . . . . . . . . . . . . . . .14  
Using the Disc and Title Menu . . . . . . . . . . . .15  
Using the Function Menu . . . . . . . . . . . . . . . .16  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . .17  
Program Play & Random Play . . . . . . . . . . . .17  
Handling Cautions  
• Before connecting other components to this player, be sure to turn them all off.  
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s  
internal parts may be damaged.  
• Do not put a flower vase filled with water or any small metal objects on the player.  
• Be careful not to put your hand into the disc tray.  
User’s Manual  
(AK68-00479B)  
Video/Audio Cable  
(AC39-42001R)  
Advanced Functions  
• Do not place anything other than the disc in the disc tray.  
Install Batteries in the Remote  
1. Open the battery cover on the back of the  
remote.  
Selecting the Audio Language . . . . . . . . . . . .18  
Selecting the Subtitle Language . . . . . . . . . . .18  
Changing the Camera Angle . . . . . . . . . . . . .19  
Using the Bookmark Function . . . . . . . . . . . .19  
Using the Zoom Function . . . . . . . . . . . . . . . .20  
SACD Playback . . . . . . . . . . . . . . . . . . . . . . .21  
DVD AUDIO Playback . . . . . . . . . . . . . . . . . .22  
Clips Menu for MP3/WMA/JPEG . . . . . . . . . .24  
Folder Selection . . . . . . . . . . . . . . . . . . . . . . .24  
MP3/WMA Playback . . . . . . . . . . . . . . . . . . .25  
Picture CD Playback . . . . . . . . . . . . . . . . . . .26  
• Exterior interference such as lightning and static electricity can affect normal operation of this player.  
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the  
AC power cord to the AC power outlet. The player will operate normally.  
• Be sure to remove the disc and turn off the player after use.  
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long  
periods of time.  
2. Insert two AAA batteries. Make sure that the  
polarities (+ and -) are aligned correctly.  
3. Replace the battery cover.  
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.  
If remote doesn’t operate properly:  
• Check the polarity + - of the batteries (Dry-Cell)  
• Check if the batteries are drained.  
Disc Storage  
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.  
• Do not keep under direct sunlight.  
• Keep in a cool ventilated area.  
• Store vertically.  
• Check if remote sensor is blocked by obstacles.  
• Check if there is any fluorescent lighting nearby.  
Changing Setup menu  
Using the Setup Menu . . . . . . . . . . . . . . . . . .27  
Setting Up the Language Features . . . . . . . . .27  
Setting Up the Audio Options . . . . . . . . . . . . .29  
Surround Sound Speaker Setup . . . . . . . . . . .30  
Setting Up the Display Options . . . . . . . . . . . .31  
Setting Up the Parental Control . . . . . . . . . . .32  
• Keep in a clean protection jacket.  
• Add in the distance & angle of the remote control  
with reference whit remote receiver.  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.  
• Do not use benzene, thinner, or other solvents for cleaning.  
• Wipe the cabinet with a soft cloth.  
Reference  
Controlling a TV with the Remote . . . . . . . . . .34  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .35  
Specifications . . . . . . . . . . . . . . . . . . . . . . . .36  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
ENG-4  
ENG-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 6  
General Features  
Disc Type and Characteristics  
Excellent Sound  
Note  
* Discs which cannot be played with this player.  
This DVD player is capable of playing the following types of discs with the corresponding logos:  
Dolby Digital, a technology developed by Dolby  
Laboratories, provides crystal clear sound reproduction.  
• DVD-ROM  
• CD-ROM  
• CDI  
• DVD-RAM  
• CDV  
• VCD  
Recording Types Disc Size Max. Playing Time  
Characteristics  
Disc Types (Logos)  
Screen  
DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
DVD-VIDEO  
Both regular and widescreen(16:9) pictures can be  
viewed.  
• CDGs play audio only, not graphics.  
5"  
Double-sided 480 min.  
Audio  
+
* Ability to play back may depend on recording  
conditions.  
Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Single-sided 80 min.  
Video  
Slow Motion  
An important scene can be viewed in slow motion.  
31/2"  
Double-sided 160 min.  
• DVD-R, +R  
• DVD+RW, -RW  
• CD-RW  
• CD-R  
Programmed Play (CD)  
AUDIO-CD  
CD is recorded as a Digital Signal  
with better audio quality, less  
distortion and less deterioration of  
audio quality over time.  
74 min.  
20 min.  
5"  
* It may not play CD-R, CD-RW and DVD-R in all  
cases due to the type of disc or condition of the  
recording.  
You can program tracks to play in desired order.  
Audio  
Parental Control (DVD)  
31/2"  
The parental control allows users to set the level  
necessary to prohibit children from viewing harmful  
movies such as those with violence, adult subject  
matter, etc.  
DVD AUDIO is a format specifically  
designed to provide the highest  
possible audio fidelity capable on  
DVD.  
COPY PROTECTION  
Many DVD discs are encoded with copy  
protection. Because of this, you should only  
connect your DVD player directly to your TV, not  
to a VCR. Connecting to a VCR results in a  
distorted picture from copy-protected DVD discs.  
DVD AUDIO  
SACD  
Audio  
+
Video  
400 min.  
74 min.  
5"  
5"  
Various On-Screen Menu Functions  
You can select various languages (Audio/Subtitle)  
and screen angles while enjoying movies.  
SACD is a high quality audio format with  
higher sampling rates and fuller, richer  
sound as compared to regular CD.  
Audio  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise  
Progressive Scan  
Progressive scanning creates an improved picture  
with double the scan lines of a conventional  
interlaced picture.  
Disc Markings  
Play Region Number  
Both the DVD player and the discs are coded by region.  
These regional codes must match in order for the disc to  
play. If the codes do not match, the disc will not play.  
Digital Photo Viewer (JPEG)  
You can view Digital Photos on your TV.  
Play Region Number  
authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
NTSC broadcast system in U.S.A, Canada,  
Korea, Japan, etc.  
The Region number for this player is 1.  
If region for numbers, which stand for their playable area,  
are printed on your DVD video disc and you do not find  
, disc playback will not be allowed by the player.  
If the DVD disc does not have any region number printed,  
the disc playback is not guaranteed.  
Repeat  
NTSC  
You can repeat a song or movie simply by pressing  
the REPEAT button.  
Dolby Digital disc  
Stereo disc  
or  
PROGRESSIVE SCAN OUTPUTS (525p)  
MP3/WMA  
This unit can play discs created from MP3/WMA  
files.  
STEREO  
“CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE, IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION TO  
THE ‘STANDARD DEFINITION’ OUTPUT.  
DIGITAL  
SOUND  
Digital Audio disc  
SACD (Super Audio CD)  
SACD is a high quality audio format with higher  
sampling rates and fuller, richer sound as compared  
to regular CD.  
DTS disc  
MP3 disc  
DVD AUDIO  
IF THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER  
SERVICE CENTER.”  
SACD disc  
DVD Audio disc  
DVD AUDIO is a format specifically designed to  
provide the highest possible audio fidelity capable  
on DVD.  
ENG-6  
ENG-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 8  
Description-Front Panel  
Description-Rear Panel  
1
2
6
1
2
3
4
5
6
7 8  
Front Panel Controls  
1. POWER (  
)
5. REMOTE CONTROL SENSOR  
6. SKIP (  
Use to turn your player on and off (standby).  
/
)
1
3
5
4
Use to skip the title, capter or track.  
2. DISC TRAY  
Place the disc here.  
Rear Panel  
7. STOP (  
)
Stops disc play.  
1. DIGITAL AUDIO OUT JACKS  
Use an optical or coaxial digital cable to connect  
to a compatible Dolby Digital receiver.  
3. OPEN/CLOSE (  
Press to open and close the disc tray.  
)
6. COMPONENT VIDEO OUT JACKS  
Use these jacks if you have a TV with  
Component Video in jacks. These jacks provide  
Pr, Pb and Y video. Component Video provides  
the best picture quality.  
8. PLAY/PAUSE (  
Begin or pause disc play.  
)
4. FRONT DISPLAY  
Operation indicators are displayed here.  
Use to connect to an A/V Amplifier that contains  
a Dolby Digital or DTS decoder.  
If Component(P-SCAN) Video Output is select-  
ed in Setup Menu, progressive scan mode will  
work.  
If Component(I-SCAN) Video Output is selected  
in Setup Menu, interlaced scan mode will work.  
2. 5.1CH ANALOG AUDIO OUT JACKS  
Connect to an amplifier with 5.1ch analog input  
jacks.  
Display Indicators  
3. MIXED AUDIO OUT JACKS  
Connect to the Audio input jacks of your  
television, audio/video receiver.  
1
4. VIDEO OUT JACK  
Use a video cable to connect to the Video input  
jack on your television.  
The Video Output in Setup Menu must be set to  
Component(I-SCAN) or S-Video.  
Important Note  
Consult your TV Users Manual to find out if your  
TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV  
Users Manuals instructions regarding Progressive  
Scan settings in the TVs menu system.  
5. S-VIDEO OUT JACK  
2
3
Front Panel Display  
Use the S-Video cable to connect this jack to  
the S-Video jack on your television for a higher  
picture quality.  
The Video Output in Setup Menu must be set to  
S-Video.  
If Component(P-SCAN) Video Output is selected  
in Setup Menu, Video and S-Video will not work.  
1. Disc type indicators  
2. Play / Pause / Forward play  
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...  
no DISC : No disc loaded.  
OPEN : The disc tray is open.  
LOAD : Player is loading disc information.  
Important Note  
During playback of SACD, the indicator scrolls SACDonce after first loading and display CD.  
During playback of DVD-AUDIO, the indicator scrolls DVD-AUDIOonce after first loading and display DVD.  
ENG-8  
ENG-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 10  
Tour of the Remote Control  
Choosing a Connection  
This remote control can also control most TVs. See pages 34.  
The following shows examples of connections commonly used to connect the DVD player with a TV  
and other components.  
8. PLAY/PAUSE Button (  
)
Press and hold the button for about 2 seconds  
to begin/pause disc play in menu.  
1
2
15  
16  
If play/pause dose not activate with single push,  
press and hold for about 2 seconds.  
9. DISPLAY Button  
Displays the current disc mode.  
Before Connecting the DVD Player  
Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.  
3
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.  
10. SET UP Button  
Refer to the owners manual of the additional components you are connecting for more information on those  
particular components.  
17  
18  
Brings up the DVD players menu.  
4
11. CLEAR Button  
Use to remove menus or status displays from  
the screen.  
12. SUBTITLE Button  
5
6
7
19  
Connection to an Audio System  
20  
21  
22  
13. AUDIO Button  
Method 1  
Method 2  
Method 3  
Use this button to access various audio  
functions on a disc.  
8
14. GROUP Button  
Use to select the GROUP.  
23  
15. POWER Button  
AUDIO  
SYSTEM  
9
24  
25  
Turns the DVD players power on or off.  
16. TV CH  
/
Buttons  
Channel selection.  
10  
11  
26  
27  
5.1ch Analog Amplifier  
Audio Input Jacks  
2ch Amplifier  
Dolby Digital Decoder  
Digital Audio Input Jack  
17. TV VOL +/- Buttons  
Control volumes.  
18. TV 100 Button  
12  
Audio Input Jacks  
13  
28  
29  
14  
Channel number button.  
19. OPEN/CLOSE (  
) Button  
To open and close the disc tray.  
20. A-B REPEAT Button  
Use to mark a segment to repeat between A  
and B.  
21. PROG. Button  
OR  
Allows you to program a specific order.  
22. SEARCH/SKIP Buttons (  
/
,
/
)
Press and hold to search forward/backward  
through a disc. Use to skip the title, chapter or  
track.  
23. CURSOR Button  
DVD Function Buttons  
DVD  
Player  
R
R
SURROUND  
FRONT  
L
S/W  
1. DVD Button  
DVD mode select button.  
2. TV Button  
TV mode select button.  
3. NUMBER Buttons  
4. I.SELECT Button  
TV input select.  
OPTICAL  
L
CENTER  
24. ENTER Button  
MIXED AUDIO OUT  
ANALOG AUDIO OUT  
COAXIAL  
This button functions as a toggle switch.  
Analog Audio Out  
(Multi Channel)  
Mixed Audio Out  
(2 Channel)  
Digital Audio Out  
25. STOP Button (  
)
Press and hold the button in Menu for about 2  
seconds.(If stop dose not activate with single  
push, press and hold for about 2 seconds.)  
26. MENU Button  
5. STEP Button  
Advances play one frame at a time.  
Brings up the Disc menu.  
6. REPEAT Button  
27. RETURN Button  
Note  
Allows you to repeat play a title, chapter, track,  
Returns to a previous menu.  
DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs  
are output through the Analog outputs.  
SACD plays back only through the Analog outputs. (See page 29~30)  
or disc.  
7. ZOOM Button  
Enlarges DVD picture.  
28. PAGE Buttons  
Use to skip the PAGE.  
29. INDEX Buttons  
Use to skip the INDEX.  
ENG-10  
ENG-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 12  
Choosing a Connection  
Playing a Disc  
7. Step Motion Play  
Connection to a TV (For Video)  
Before Play  
(Except CD/DVD-AUDIO/SACD)  
Press the STEP button on the remote during play.  
- Each time the button is pressed, a new frame will  
appear.  
TV (Normal, Widescreen, Projection, etc..)  
Turn on your TV and set it to the correct Video  
Input by pressing TV/VIDEO button on.  
If you connected an external Audio System, turn  
on your Audio System and set it to the correct  
Audio Input.  
Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on.  
- No sound is heard during STEP mode.  
Method 1  
Method 2  
Method 3  
Method 4  
- Press and hold the PLAY/PAUSE (  
normal play.  
) to resume  
Best  
picture  
Optimum  
picture  
Good  
picture  
Better  
picture  
After plugging in the player, the first time you press  
the DVD POWER button, this screen comes up :  
If you want to select a language, press a  
(You can only perform step motion play in the forward  
direction.)  
Basic Audio  
NUMBER button. (This screen will only appear  
when you plug in the player for the first time.)  
If the language for the startup screen is not set,  
the settings may change whenever you turn the  
power on or off. Therefore, make sure that you  
select the language you want to use.  
8. Slow Motion Play  
(Except CD/DVD-AUDIO/SACD)  
Press and hold the FWD SEARCH (  
remote during PAUSE or STEP mode.  
- By pressing the FWD SEARCH (  
select slow motion play for 1/8, 1/4 or 1/2 of normal  
speed.  
TV  
) button on the  
Video  
Cables  
S-Video  
Cable  
AV Cable  
) button, you can  
- No sound is heard during slow mode.  
- Press and hold the PLAY/PAUSE (  
normal play.  
OR  
OR  
) to resume  
- Reverse slow motion play will not work.  
DVD  
Player  
RESUME function  
VIDEO OUT  
S-VIDEO OUT  
MIXED AUDIO OUT  
COMPONENT AUDIO OUT  
COMPONENT AUDIO OUT  
When you stop disc play, the player remembers  
where you stopped, so when you press and hold the  
Component Video  
Jacks  
(Progressive)  
Component Video  
Jacks  
(Interlace)  
Audio Output  
Jacks  
Video Output  
Jack  
S-Video  
Jack  
PLAY/PAUSE (  
) button again, it will pick up  
where you left off. (unless the disc is removed or the  
player is unplugged, or if you press and hold the  
Play  
Method 1  
STOP (  
) button twice.)  
DVD Player + TV with Video Input Jack  
(The Video Output in Setup Menu must be set to the S-Video or Component(I-SCAN).)  
1. Press the OPEN/CLOSE button.  
The STANDBY indicator light goes out and the tray  
opens.  
Method 2  
Note  
DVD Player + TV with S-Video Input Jack  
(The Video Output in Setup Menu must be set to the S-Video.)  
If the player is left for about 5 minutes in pause  
mode, it will stop.  
2. Place a disc gently into the tray with the discs  
label facing up.  
Method 3  
If the player is left in the stop mode for more than  
about 30 minutes, the power will automatically  
shut off. (Automatic Power-Off Function)  
3. Press and hold the PLAY/PAUSE (  
OPEN/CLOSE button to close the disc tray.  
) button or  
DVD Player + TV with Component Video Jacks  
(The Video Output in Setup Menu must be set to the Component(I-SCAN).)  
If the player is left in the stop mode for more than  
one minute without any user interaction, a screen  
saver will be activated. Press and hold the  
Method 4  
4. Stopping Play  
Press the STOP (  
DVD Player + TV with Progressive Scan Jacks.  
(The Video Output in Setup Menu must be set to the Component(P-SCAN).)  
) button during play.  
PLAY/PAUSE (  
This icon indicates an invalid button press.  
When OSD menu screen is displayed, our press of  
PLAY/PAUSE ( ) button or STOP ( ) buttom  
) button to resume normal play.  
5. Removing Disc  
Press the OPEN/CLOSE button.  
If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on  
your TV. Then select Component(P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds,  
change the TVs external input to 525p(480p or Component) and select Yes(See Page 32).  
6. Pausing Play  
If Component(P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.  
Press and hold the PLAY/PAUSE (  
on the remote during play.  
- Screen stops, no sound.  
- To resume, press and hold the PLAY/PAUSE (  
button once again.  
) or STEP button  
function as the Up/down cursor. It will only activate  
the Play, Pause or Stop function when it is press  
and hold for about 2 seconds.  
Important Note  
Consult your TV Users Manual to find out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV Users Manuals instructions regarding Progressive Scan  
settings in the TVs menu system.  
)
Depending on your TV, the Method of connection may differ from the illustration above.  
ENG-12  
ENG-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 14  
Using the Search & Skip Functions  
Using the Display Function  
Using the Display Function  
Using the Disc and Title Menu  
To access the desired title when there is  
During play, you can search quickly through a  
chapter or track or use the skip function to  
jump to the next selection.  
When Playing a DVD  
1. During play, press the DISPLAY button on the  
remote.  
Using the Disc Menu  
more than one in the disc.  
For example, if there is more than one  
movie on a DVD, each movie will be  
identified.  
Title  
1. During the playback of a DVD disc, press the  
SETUP button on the remote.  
2. Use the UP/DOWN buttons to select the desired  
item.  
2. Select Disc Menu using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Searching through a Chapter or Track  
During play, press and hold the  
on the remote.  
or  
button  
Most DVD discs are recorded in  
chapters so that you can quickly find a  
specific passage (similar to tracks on an  
audio CD).  
3. Use the LEFT/RIGHT buttons to make the  
desired setup and then press the ENTER button.  
You may use the number buttons of the remote  
control to directly access a title, chapter or to  
start the playback from the desired time.  
Chapter  
Track  
In case of SACD, when the clips menu is off, you can use  
this function. (See page 21)  
DVD  
2X, 4X, 8X, 32X, 128X  
Allows playback of the film from a  
desired time. You must enter the starting  
time as a reference.  
CD/SACD/DVD-AUDIO 2X, 4X, 8X  
4. To make the screen disappear, press the  
DISPLAY button again.  
Time  
DVD  
Refers to the language of the film  
soundtrack. In the example, the  
soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight  
different soundtracks.  
Audio  
DVD  
01  
Title  
Skipping Tracks  
During play, press the  
02  
Chapter  
Using the Title Menu  
0:00:13  
Time  
or  
button.  
ENG 5.1CH  
Audio  
1. During the playback of a DVD disc, press the  
SETUP button on the remote.  
When playing a DVD/DVD-AUDIO, if you press the  
button, it moves to the next chapter. If you press the  
button, it moves to the beginning of the same chapter.  
One more press makes it move to the beginning of the  
previous chapter.  
Off  
Subtitle  
Refers to the subtitle languages  
available in the disc.  
You will be able to choose the subtitle  
languages or, if you prefer, turn them off  
from the screen.  
Subtitle  
2. Select Title Menu using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
When playing a SACD or CD, if you press the  
button, it moves to the next track. If you press the  
button, it moves to the beginning of the same track.  
One more press makes it move to the beginning of the  
previous track.  
A DVD disc can have up to 32 different  
subtitles.  
When Playing a CD  
1. A CD play starts.  
The DISPLAY window appears directly.  
2. Press the DISPLAY button, the display screen  
disappears.  
CD  
CD  
01  
Track  
Note  
0:00:48  
Time  
Depending on a disc, the Title and Disc Menus  
may not work.  
Title Menu will only be displayed if there are at  
least two titles in the disc.  
You can also use the Disc Menu, using the MENU  
button on the remote.  
ENG-14  
ENG-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 16  
Using the Function Menu  
Repeat Play  
Slow Repeat Play  
Program Play & Random Play  
Program Play (CD-DA Only)  
Using the Function Menu  
Repeat the current track, chapter, title, a  
chosen section (A-B), or all of the disc.  
This feature allows you slowly to repeat  
scenes containing sports, dancing, musical  
instruments being played etc. so you can  
study them more closely.  
1. Press the PROG. button.  
1. Press the SETUP button during playback.  
2. Use the LEFT/RIGHT buttons to select  
PROGRAM. Press the ENTER button.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
When playing a DVD/CD  
1. Press the REPEAT button on the remote.  
Repeat screen appears.  
When playing a DVD  
3. Use the LEFT/RIGHT/UP/DOWN buttons to  
select the first track to add to the program.  
Press the ENTER button. The selection numbers  
appear in the Program Order box.  
3. Function selection screen appears: Info, Zoom,  
Bookmark.  
1. During play, press and hold the PLAY/PAUSE  
2. Select Chapter, Title or A-B using the  
LEFT/RIGHT buttons.  
(
) button.  
-
-
-
-
-
-
Info (See Page 14~15)  
Zoom (See Page 20)  
Chapter (  
) : repeats the chapter that is playing.  
2. Press and hold the  
button on the remote  
Bookmark (See Page 19~20)  
Repeat (See Page 16)  
SACD/CD (See Page 21~22)  
Angle (See Page 19)  
4. Press and hold the PLAY/PAUSE (  
The disc will be played in programmed order.  
) button.  
Title ( T ) : repeats the title that is playing.  
A-B : repeats a segment of the disc that you select.  
during PAUSE or STEP mode. Press again and  
you can select slow motion play for 1/8, 1/4 and  
1/2 of normal speed.  
PROGRAM  
RANDOM  
DVD  
3. Press the A-B RPT button to select the point  
where the function starts. (A)  
4. Use the UP/DOWN button to highlight one of the  
6 functions. Then press the RIGHT or ENTER  
button to access the function.  
REPEAT ENTER  
Off  
01  
01 A - B  
T
4. Press the A-B RPT button to select the point  
where the function ends. (B)  
PROGRAM 01  
Track  
Program Order  
- - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
CD  
Note  
REPEAT ENTER  
Off  
T
01  
D
01 A - B  
The disc will play from A to B repeatedly at the  
CLEAR  
speed you chose.  
To terminate the function, press the CLEAR button or  
A-B RPT button again.  
Random Play (CD-DA Only)  
* A-B REPEAT  
1. Press the PROG. button.  
Press the REPEAT button. Select A-B on screen with  
the LEFT/RIGHT buttons or press the A-B RPT button  
on the remote.  
Press ENTER at the point where you want the repeat  
play to start (A). The B is automatically highlighted.  
Press ENTER at the point where you want the repeat  
play to stop (B).  
2. Use the LEFT/RIGHT buttons to select RANDOM.  
Press the ENTER button.  
Note  
You can also directly select these functions using  
their respective buttons on the remote.  
PROGRAM  
RANDOM  
To terminate the function, press the CLEAR button or  
A-B RPT button again.  
A-B REPEAT does not allow you to set point (B) until at  
least 5 seconds has elapsed after point (A) has been  
set.  
3. Press ENTER.  
4. To return to normal play, press REPEAT again,  
then press the LEFT/RIGHT buttons to select Off  
and press ENTER.  
Note  
Depending on a disc, the Program and Random  
Play functions may not work.  
Note  
This unit can support a maximum of 20  
programmed tracks.  
DVD repeats play by chapter or title, CD repeats  
play by disc or track.  
While in playback mode, press the CLEAR button  
on the remote control to cancel Programmed Play  
or Random Play.  
Depending on a disc, the Repeat function may not  
work.  
ENG-16  
ENG-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 18  
Selecting the Audio Language  
Selecting the Subtitle Language  
Changing the Camera Angle  
Using the Bookmark Function  
You can select a desired language quickly and  
easily with the AUDIO button.  
You can select a desired subtitle quickly and  
easily with the SUBTITLE button.  
When a DVD contains multiple angles of a  
particular scene, you can use the ANGLE  
function.  
This feature lets you bookmark sections of a  
DVD so you can quickly find them at a later  
time.  
Using the AUDIO button  
Using the SUBTITLE button  
Using the ANGLE Function  
Using the Bookmark Function (DVD)  
1. Press the AUDIO button.  
1. Press the SUBTITLE button.  
1. During play, press the SETUP button on the  
remote.  
If the disc contains multiple angles, the ANGLE  
mark appears on the screen.  
2. The Audio changes when the button is pressed  
repeatedly.  
2. The subtitle changes when the button is pressed  
repeatedly.  
- The audio languages are represented by abbreviations.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
1. Press the SETUP button and select the angle in  
Function, then ANGLE icon will appear with the  
current angle number and the number of angles  
available.  
3. To turn off the display, press the CLEAR or  
RETURN button.  
- Initially, the subtitle will not appear on screen.  
- The subtitle languages are represented by  
abbreviations.  
3. Press the AUDIO button to select Stereo, Left or  
Right. (On CD)  
3. Select Bookmark using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
DVD  
2. Select the desire angle by using the LEFT/RIGHT  
button and press ENTER.  
4. Use the LEFT/RIGHT buttons to move to the  
desired bookmark icon.  
AUDIO  
ENG DOLBY DIGITAL 5.1CH  
SUBTITLE  
ENG  
3. To remove the ANGLE icon, press the CLEAR or  
RETURN button.  
5. When you reach the scene you want to mark,  
press the ENTER button. The icon will change to  
a number (1, 2, or 3).  
CD  
AUDIO  
Stereo  
ANGLE  
4/6  
Note  
Note  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
A DVD disc can contain up to 8 audio languages.  
A DVD disc can contain up to 32 subtitle  
languages.  
Note  
Note  
How to have the same audio language come up  
whenever you play a DVD;  
Refer to Setting Up the Language Featureson  
page 28.  
If the disc has only one angle, this feature wont  
work. Currently, very few discs have this feature.  
If you want to playback the marked scene press  
and hold PLAY/PAUSE button (  
Highlighted number.  
How to have the same subtitle language come  
up whenever you play a DVD;  
Refer to Setting Up the Language Featureson  
page 29.  
) at the  
ENG-18  
ENG-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 20  
Using the Bookmark Function  
Using the Zoom Function  
SACD Playback  
1. Open the disc tray.  
Recalling a Marked Scene  
Using the Zoom Function (DVD)  
SACD Clips Menu Off Play Function  
1. In Stop mode, press the MENU button until the  
Clips menu is off.  
2. Place the SACD disc on the tray.  
- Place the SACD disc with the labeled side up.  
1. During play, press the SETUP button on the  
remote and select the Bookmark.  
1. During play or pause mode, press the ZOOM  
button on the remote.  
A Zoom mark will be displayed on screen.  
2. Press and hold the PLAY/PAUSE (  
) button.  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
2. Use the LEFT/RIGHT buttons to select a marked  
scene.  
3. The Display appears directly. A SACD play starts  
in Menu Off mode.  
2. Use the UP/DOWN or LEFT/RIGHT buttons to  
select the part of the screen you want to zoom in  
on.  
3. Press and hold the PLAY/PAUSE (  
skip to the marked scene.  
) button to  
4. Use the UP/DOWN buttons to select the desired  
item.  
3. Press the ENTER button.  
- During DVD play, press ENTER to zoom in  
2X/4X/2X/Normal in order.  
SACD  
O ff  
SACD  
00:00:23  
2CH  
MULTI  
01  
Track  
0 0 1 . West Side Story  
:
MUSIC  
1
0:00:13  
Time  
0 0 2 . West Side Story  
0 0 3 . West Side Story  
0 0 4 . West Side Story  
0 0 5 . West Side Story  
0 0 6 . West Side Story  
:
:
:
:
:
MUSIC  
MUSIC  
MUSIC  
MUSIC  
MUSIC  
2
3
4
5
6
MULTI  
Audio  
West Side Story  
:
Prologue  
REPEAT  
DISPLAY  
R
E
P
E
A
T
D
I
S
P
L
A Y  
5. Use the LEFT/RIGHT buttons to make the  
desired setup and then press ENTER.  
You may use the number buttons of the remote  
control to directly access a track and to start the  
playback from the desired time.  
SACD Clips Menu On Play Function  
Clearing a Bookmark  
1. Use the UP/DOWN buttons to select a music title.  
1. During play, press the SETUP button on the  
remote and select the Bookmark.  
2. Press the ENTER button to begin playback of the  
music title.  
- If you want to use the Repeat Function, press the  
REPEAT button to change the mode, such as Off,  
Track, Disc.  
6. To make the screen disappear, press the  
DISPLAY button.  
2. Use the LEFT/RIGHT buttons to select the  
bookmark number you want to delete.  
To access the desired Track when there  
3. Press the CLEAR button to delete a bookmark  
number.  
*Off : Normal Playback  
is more than one in the disc.  
Track  
Time  
*Track : Repeats the current music track.  
*Disc : Repeats the music titles in the SACD.  
- If you want to see information about the Disc title  
and Artist, press the DISPLAY button.  
- During play or stop mode, you can change the  
2CH or MULTI mode use LEFT/RIGHT button.  
- On the stop mode, press the SETUP button and  
select the SACD/CD in Function to playback in  
regular CD mode.  
Allows playback from a desired time by  
using the number buttons.  
Note  
If you want to change the 2channel or  
multi channel play or stop mode, press  
AUDIO button.  
Up to three scenes may be marked at a time.  
Depending on a disc, the Bookmark function may  
not work.  
Audio  
- 2CH : L, R  
- MULTI : F/L, F/R, R/L, R/R, C/T, S/W  
- Our 2CH SACD dose not change to  
L or R.  
Note  
You can use this function when SACD disc  
includes multi channel and 2 channel audio format.  
Note  
You can use this function when SACD disc  
includes multi channel and 2 channel audio  
format.  
ENG-20  
ENG-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 22  
SACD Playback  
DVD AUDIO Playback  
DVD AUDIO Playback  
1. Open the disc tray.  
Most DVD AUDIO discs are recorded in  
Group Group, you can change Groups with this  
CD Layer Play Function  
REPEAT Play  
1. Press the REPEAT button on the remote.  
2. Select Title, Group using the LEFT/RIGHT button.  
3. Press ENTER.  
During SACD disc stop mode with clip menu off,  
press the SETUP button and select the SACD/CD in  
Function by using LEFT/RIGHT/UP/DOWN and then  
press the ENTER button. You can playback CD  
layer in SACD disc. (Refer to the page 14 for setting  
CD playback Function).  
2. Place the DVD AUDIO disc on the tray.  
Function.  
-
Place the DVD AUDIO disc with the labeled side up.  
Note  
3. Close the tray.  
- The tray closes and disc plays.  
* Bonus Group playback.  
Some DVD AUDIO discs have Bonus  
groups. If you want to play a Bonus  
group, you must enter the Bonus  
Group code. The code is usually on  
the DVD AUDIO disc case.  
REPEAT ENTER  
Off  
T
01  
01  
G
Using the Display Function  
1. During play, press the DISPLAY button on the  
remote.  
To access the desired Track when there is  
2. Use the UP/DOWN buttons to select the desired  
item.  
more than one on the DVD AUDIO disc.  
Track  
Page  
If pages are included with the  
DVD-AUDIO, you can see this icon.  
To access the desired page, you can  
use this Function.  
3. Use the LEFT/RIGHT buttons to make the  
desired setup and then press ENTER.  
You may use the number buttons of the remote  
control to directly access a Group, Track, Page  
or to start the playback from the desired time.  
CD  
01  
Track  
AUDIO Format Display  
If a slide show is included with the  
DVD-AUDIO, you can see this icon.  
In this case you cannot use PAGE  
UP/DOWN buttons.  
0:00:13  
Time  
4. To make the screen disappear, press the  
DISPLAY button again.  
Slide  
During DVD AUDIO playback, press the AUDIO  
button to see AUDIO Format information.  
LPCM : Linear Pulse Code Modulation.  
Not compressed Audio data format.  
PPCM : Packet Pulse Code Modulation.  
Lossless compressed Audio data format.  
DVD AUDIO  
If a video zone is included with the  
DVD-AUDIO, you can see this icon.  
In this case you cannot use PAGE  
UP/DOWN buttons.  
01  
Group  
V-zone  
Time  
01  
Track  
01  
Page  
0:00:13  
Time  
To access the desired Track when there  
Allows playback of the music from a  
desired time by using the number buttons.  
is more than one in the disc.  
Track  
Time  
PPCM 5.1CH  
Allows playback from a desired time.  
You must enter the starting time as a  
reference.  
Group, Index, Page Function  
- Use the GROUP button to change a group.  
- Use PAGE UP/DOWN buttons to Skip the Page  
when there is more than one in a group.  
Some DVD-AUDIO discs include a slide show.  
In the slide show mode, this function can not use.  
PAGE is still images. You can see the still images  
when DVD-AUDIO disc plays.  
Note  
Some DVD-AUDIO discs dont audio down-mixing.  
These discs always output 5.1ch analog audio  
regardless of audio setup.  
Note  
Some SACD discs do not include a CD layer.  
Note  
Depending on a disc, this function may not work.  
Some DVD-AUDIO discs dont allow audio  
down-mixing. These discs always output 5.1ch  
analog audio regardless of audio setup.  
- Use INDEX +/- buttons to Skip the Index when  
there is more than one in a track.  
Note Depending on a disc, this function may not work.  
ENG-22  
ENG-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 24  
Clips Menu for MP3/WMA/JPEG  
Folder Selection  
MP3/WMA Playback  
1. Open the disc tray.  
Discs with MP3/WMA/JPEG contain individual  
songs or pictures that can be organized into  
folders as shown below.  
They are similar to how you use your  
computer to put files into different folders.  
The folder can only be selected in the Stop  
mode.  
CD-R MP3/WMA discs  
When you record MP3 or WMA files on CD-R,  
please refer to the following.  
2. Place the disc on the tray.  
- Place the disc with the labeled side up.  
To select the Parent Folder  
Your MP3 or WMA files should be ISO 9660 or JOLIET  
format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and with  
Apple's Mac. This format is the most widely used.  
Press the RETURN button to go to parent folder,  
or use the UP/DOWN buttons to select ..and  
press ENTER to go to the parent folder.  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
1. Open the disc tray.  
2. Place the disc on the tray.  
- Place the disc with the labeled side up.  
To select the Peer Folder  
Use the LEFT/RIGHT buttons to highlight left  
window. Use the UP/DOWN buttons to select the  
desired folder, then press ENTER.  
MP3/WMA Play Function  
When naming your MP3 or WMA files, do not exceed 8  
characters, and enter .mp3, .wmaas the file  
extension.  
General name format of: Title.mp3. or Title.wma.  
When composing your title, make sure that you use 8  
characters or less, have no spaces in the name, and  
avoid the use of special characters including: (.,/,\,=,+).  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
1. Select the desired folder.  
2. Use the UP/DOWN or LEFT/RIGHT buttons to  
select a song file.  
To select the Sub-Folder  
O ff  
Use the LEFT/RIGHT buttons to highlight right  
window. Use the UP/DOWN buttons to select the  
desired folder, then press ENTER.  
3. Press ENTER to begin playback of the song file.  
00:00:23  
1_mp3  
Use a decompression transfer rate of at least 128  
Kbps when recording MP3 files.  
B e c a u s e Yo u  
C a c t u s  
O ff  
Sound quality with MP3 files basically depends on the rate  
of compression/decompression you choose. Getting CD  
audio sound requires an analog/digital sampling rate, that  
is conversion to MP3 format, of at least 128 Kbps and up  
to 160 Kbps. However, choosing higher rates, like 192  
Kbps or more, only rarely give better sound quality.  
Conversely, files with decompression rates below 128  
Kbps will not be played properly.  
Sad Day  
Root  
00:00:23  
1_mp3  
WMA  
JPEG  
B e c a u s e Yo u  
C a c t u s  
Sad Day  
MP3  
Parent Folder  
Parent Folder, Current Folder Folders and Files in  
and Peer Folders Current Folder  
MUSIC  
Current Folder  
Use a decompression transfer rate of at least 64Kbps  
when recording WMA files.  
: Name of currently playing file.  
: Current Playback Time.  
1st  
Sound quality with WMA files basically depends on the  
rate of compression/decompression you choose.  
Getting CD audio sound requires an analog/digital  
sampling rate, that is conversion to WMA format, of at  
least 64Kbps and up to 192Kbps.  
Sub-Folders  
2nd  
Repeat/Random playback  
SONG FILE  
SONG FILE  
1
2
Press the REPEAT button to change playback  
mode. There are 4 modes, such as Off, Track,  
Folder and Random.  
: Current Playback Mode : There are 4  
modes. They can be selected in order by  
pressing the REPEAT button.  
Peer Folders  
Conversely, files with decompression rates below 64Kbps  
or over 192Kbps will not be played properly.  
- Off : Normal Playback  
SONG FILE  
3
- Off : Normal Playback  
- Track : Repeats the current song file.  
- Folder : Repeats the song files which have the  
same extension in the current folder.  
- Random : Song files which have the same  
extension will be played in random  
order.  
Do not try recording copyright protected MP3 files.  
Certain "secured" files are encrypted and code protected  
to prevent illegal copying. These files are of the following  
types: Windows MediaTM (registered trade mark of  
Microsoft Inc) and SDMITM (registered trade mark of The  
SDMI Foundation). You cannot copy such files.  
- Track : Repeats the current track.  
- Folder : Repeats the current folder.  
- Random : Files in the disc will be played  
in random order.  
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
: Folder icon.  
Important: The above recommendations cannot be taken  
as a guarantee that the DVD player will play MP3  
* To resume normal play, press the CLEAR button.  
recordings, or as an assurance of sound quality. You  
should note that certain technologies and methods for  
MP3 file recording on CD-Rs prevent optimal playback of  
these files on your DVD player (degraded sound quality  
and in some cases, inability of the player to read the files).  
This unit can play a maximum of 3000 files and 300  
folders per disc.  
: Current Folder icon.  
ENG-24  
ENG-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 26  
Picture CD Playback  
Using the Setup Menu  
Setting Up the Language Features  
1. Select the desired folder. (See page 24 to select  
the folder)  
Note  
The Setup menu lets you customize your DVD  
player by allowing you to select various  
language preferences, set up a parental level,  
even adjust the player to the type of television  
screen you have.  
If you set the player menu, disc menu, audio  
and subtitle language in advance, they will  
come up automatically every time you watch a  
movie.  
If no buttons on the remote control pressed for 10  
seconds, the menu will disappear.  
Press the DISPLAY button on the remote control to  
display the menu again.  
Press and hold the STOP button to return to the  
clips menu.  
When playing a Kodak Picture CD, the unit  
displays the Photo directly, not the clips menu.  
2. Use the UP/DOWN buttons to select a Picture file in  
clips menu and then press the ENTER button. You  
should get a screen that looks like the one below.  
Using the Player Menu Language  
1. With the unit in Stop mode, press the SETUP  
button on the remote. Select Setup using  
UP/DOWN buttons, then press the RIGHT or  
ENTER button.  
1. With the unit in Stop mode, press the SETUP  
button.  
ENTER RETURN  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
CD-R JPEG Discs  
Only files with the ".jpg" and ".JPG" extensions can  
be played.  
Language Setup : Setup of the Language.  
3. Select Language Setup using UP/DOWN  
buttons, then press the RIGHT or ENTER button.  
Audio Setup : Setup of the Audio Options  
Use the DISPLAY button on the remote control to  
select the menu you want to view and then press the  
ENTER button.  
If the disc is not closed, it will take longer to start  
playing and not all of the recorded files may be  
played.  
Display Setup : Setup of the Display Options  
Use to select which type of screen you want to  
watch and several display options.  
: Returns to the Album Screen.  
Only CD-R discs with JPEG files in ISO 9660 or Joliet  
Parental Setup : Setup of the Parental Level  
Allows users to set the level necessary to  
prevent children from viewing unsuitable  
movies such as those with violence, adult  
subject matter, etc.  
format can be played.  
To see the next 6 pictures, press the  
button.  
button.  
The name of the JPEG file may not be longer than 8  
characters and should contain no blank spaces or  
special characters (. / = +).  
To see the previous 6 pictures, press the  
4. Select Player Menu using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
: Each time the ENTER button is pressed, the  
Only a consecutively written multisession disc can be  
played. If there is a blank segment in the multisession  
disc, the disc can be played only up to the blank  
segment.  
picture rotates 90 degrees clockwise.  
LANGUAGE SETUP  
: Each time the ENTER button is pressed, the  
picture is enlarged up to 4X.  
Disc Menu  
Title Menu  
A maximum of 3000 images can be stored on a single  
CD.  
(Normal 2X 4X 2X Normal)  
Function  
Setup  
: The unit enters slide show mode.  
Kodak Picture CDs are recommended.  
When playing a Kodak Picture CD, only the JPEG  
files in the pictures folder can be played.  
*Before beginning the Slide Show, the picture interval  
must be set.  
5. Use the UP/DOWN buttons to select the desired  
language.  
Kodak Picture CD : The JPEG files in the pictures  
folder can be played automatically.  
ENTER RETURN  
TIMER:  
PLAYER MENU LANGUAGE  
2. Use the UP/DOWN buttons on the remote to  
access the different features.  
Konica Picture CD : If you want to see the Picture,  
select the JPEG files in the clips menu.  
Player Menu  
English  
Fran ais  
Deutsch  
Espa ol  
Fuji Picture CD : If you want to see the Picture, select  
the JPEG files in the clips menu.  
3. Press the ENTER button to access the sub  
features.  
Italiano  
Nederlands  
QSS Picture CD : The unit cannot play QSS Picture  
CD.  
: When this icon is selected and ENTER is  
pressed, the pictures change automatically  
with about a 6 second interval.  
To make the setup screen disappear after setting  
up, press the SETUP button again.  
If the number of files in 1 Disc is over 3000, only 3000  
JPEG files can be played.  
6. Press the ENTER button.  
If the number of folders in 1 Disc is over 300, only  
JPEG files in 300 folders can be played.  
: The pictures change automatically with about  
a 12 second interval.  
Note  
- The language is selected and the screen returns to  
Language Setup menu.  
- To make the SETUP menu disappear, press the  
RETURN or LEFT button.  
Depending on a disc, some Setup Menu selections  
may not work.  
: The pictures change automatically with about  
a 18 second interval.  
*Depending on a file size, the amount of time between  
each picture may be different from the manual.  
*If you dont press any button, the slide show will start  
automatically in about 10 seconds by default.  
ENG-26  
ENG-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 28  
Setting Up the Language Features  
Setting Up the Language Features  
Setting Up the Language Features  
Setting Up the Audio Options  
1. With the unit in Stop mode, press the SETUP  
button.  
Using the Disc Menu Language  
Using the Audio Language  
Using the Subtitle Language  
This function changes the text language only on the  
disc menu screens.  
1. With the unit in Stop mode, press the SETUP  
button.  
1. With the unit in Stop mode, press the SETUP  
button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
1. With the unit in Stop mode, press the SETUP  
button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
3. Select Audio Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
3. Select Language Setup using UP/DOWN  
3. Select Language Setup using UP/DOWN  
press the RIGHT or ENTER button.  
buttons, then press the RIGHT or ENTER button.  
buttons, then press the RIGHT or ENTER button.  
3. Select Language Setup using UP/DOWN  
4. Select Audio using UP/DOWN buttons, then  
4. Select Subtitle using UP/DOWN buttons, then  
buttons, then press the RIGHT or ENTER button.  
press the RIGHT or ENTER button.  
press the RIGHT or ENTER button.  
4. Select Disc Menu using UP/DOWN buttons, then  
5. Use the UP/DOWN buttons to select the desired  
5. Use the UP/DOWN buttons to select the desired  
press the RIGHT or ENTER button.  
language.  
language.  
- Select Originalif you want the default soundtrack  
language to be the original language the disc is  
recorded in.  
- Select Automaticif you want the subtitle language to  
be the same as the language selected as the audio  
preference.  
5. Use the UP/DOWN buttons to select the desired  
language.  
- Select Othersif the language you want is not listed.  
- Select Othersif the language you want is not listed.  
- Select Othersif the language you want is not listed.  
Some discs may not contain the language you select  
as your initial language; in that case the disc will use its  
original language setting.  
4. Use the UP/DOWN buttons to select the desired  
item. Then press the RIGHT or ENTER button.  
AUDIO LANGUAGE  
DISC MENU LANGUAGE  
AUDIO SETUP  
Disc Menu  
Audio  
Digital Output  
:
PCM  
SUBTITLE LANGUAGE  
Automatic  
DTS  
:
:
:
Off  
On  
On  
Dynamic Compression  
PCM Down Sampling  
Speaker Setup  
Original  
Others  
Others  
Subtitle  
Others  
6. Press the ENTER button.  
- The language is selected and the screen returns to  
6. Press the ENTER button.  
- The language is selected and the screen returns to  
Language Setup menu.  
Digital Output  
Language Setup menu.  
6. Press the ENTER button.  
- The language is selected and the screen returns to  
LANGUAGE SETUP menu.  
1. PCM : Converts to PCM(2CH) 48kHz audio. Select  
PCM when using the Analog Audio Outputs.  
2. Bitstream : Converts to Dolby Digital Bitstream  
(5.1CH). Select Bitstream when using the  
Digital Audio Output.  
Note  
Note Even when PCM Down sampling is Off  
If the selected language is not recorded on the  
disc, the original pre-recorded language is  
selected.  
Some discs will only output down sampled  
audio through the digital outputs.  
High sampling rate DVD-Audio discs  
(192KHz or 176.4KHz) always output audio  
down sampled to 96KHz or 88.2KHz through  
the digital outputs.  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
When playing LPCM or PPCM DVD  
protected by copyright. If digital audio source  
is 48KHz/16bit the Digital output is mute.  
ENG-28  
ENG-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 30  
Setting Up the Audio Options  
Surround Sound Speaker Setup  
Surround Sound Speaker Setup  
Setting Up the Display Options  
DTS  
1. With the unit in Stop mode, press the SETUP  
button.  
The default settings : FRONT L, R (Small),  
CENTER (Small), SURROUND (Small) Select the  
size of the speakers to be connected.  
1. With the unit in Stop mode, press the SETUP  
button.  
1. Off : Doesnt output digital signal.  
2. On : Outputs DTS Bitstream via digital output only.  
Select DTS when connecting to a DTS Decoder.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
Front (FL, FR)  
- Large: Normally select this.  
- Small: When the sound distorts or the surround  
sound effects are difficult to hear, select this.  
This activates the Dolby Digital bass redirection  
circuitry and outputs the bass frequencies of the  
speaker from the subwoofer.  
Note There is no analog audio output when you play  
DTS sound disc.  
3. Select Audio Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
3. Select Display Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Dynamic Compression  
1. On : To select dynamic compression.  
2. Off : To select the standard range.  
PCM Down Sampling  
Center  
1. On : Select this when the amplifier connected to the  
player is not 96KHz compatible. In this case, the  
96KHz signals will be down converted to 48KHZ.  
- None: If you do not connect a center speaker,  
select this.  
- Large: Normally select this.  
2. Off : Select this when the amplifier connected to the  
player is 96KHz compatible. In this case, all  
signals will be output without any changes.  
- Small: When the sound distorts, select this.  
This activates the Dolby Digital bass redirection  
circuitry and outputs the bass frequencies of the  
center speaker from other speakers.  
4. Use the UP/DOWN buttons to select the desired  
item. Then press the RIGHT or ENTER button.  
Speaker Setup  
Surround (SL, SR)  
- None: If you do not connect a surround speaker,  
select this.  
4. Use the UP/DOWN buttons to select Speaker  
Setup. Then press the RIGHT or ENTER button.  
Note  
DISPLAY SETUP  
- Large (Rear/Side): Normally select either of these  
according to the rear speakers position.  
- Small (Rear/Side): When the sound distorts or the  
surround sound effects are difficult to hear, select  
either of these according to the rear speakers  
position. This activates the Dolby Digital bass  
redirection circuitry and outputs the bass  
frequencies of the rear speaker from other  
speakers.  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
TV Aspect  
:
:
:
:
:
Wide  
Auto  
On  
AUDIO SETUP  
Still Mode  
Digital Output  
:
PCM  
Screen Messages  
Black Level  
Video Output  
On  
DTS  
:
:
:
Off  
On  
On  
S-Video  
Dynamic Compression  
PCM Down Sampling  
Speaker Setup  
Manufactured under license from Dolby  
Laboratories. Dolbyand the double-D symbol are  
trademarks of Dolby Laboratories.  
• “DTSand DTS Digital Outare trademarks of  
Digital Theater Systems, Inc.  
DVD-AUDIO  
TV Aspect  
- Outputs two channel digital audio only.  
- Some DVD-AUDIO discs do not downmix, so  
they will not output 2 channel digital audio.  
- MULTI channel DVD-AUDIO discs play back  
through the analog outputs.  
5. Use the UP/DOWN or LEFT/RIGHT buttons to  
select the desired item. Then press the ENTER  
button.  
Setting up TEST  
Depending on the type of television you have, you may  
want to adjust the screen setting (aspect ratio).  
The test output signals come clockwise starting from  
the Front Speaker(L). Adjust Channel Balance to  
match to the volume of test signals memorized in  
the system.  
1. 4:3 Letter Box : Select when you want to see the total  
16:9 ratio screen DVD supplies, even though you  
have a TV with a 4:3 ratio screen. Black bars will  
appear at the top and bottom of the screen.  
SPEAKER SETUP  
SACD  
Outputs analog signals only.  
2. 4:3 Pan Scan : Select this for conventional size TVs  
when you want to see the central portion of the 16:9  
screen. (Extreme left and right side of movie picture  
will be cut off.)  
FRONT(L)  
FRONT(R)  
CENTER  
SURROUND(R)  
SUBWOOFER(LFE)  
On  
SURROUND(L)  
3. 16:9 Wide : You can view the full 16:9 picture on your  
widescreen TV.  
Note  
How to make the SETUP menu disappear or return  
to menu screen during set up. Press RETURN or  
LEFT button.  
The subwoofer test output signal is lower than the  
other speakers.  
The MPEG Multichannel logo is a trademark  
registered by PHILIPS Corporation.  
If you Set Front (FL, FR) Small, LFE (Subwoofer)  
is sat Onautomatically.  
ENG-30  
ENG-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 32  
Setting Up the Display Options  
Setting Up the Parental Control  
Setting Up the Parental Control  
CREATE PASSWORD  
The Parental Control function works in conjunction  
with DVDs that have been assigned a rating - which  
helps you control the types of DVDs that your family  
watches. There are up to 8 rating levels on a disc.  
5. Select Rating Level using UP/DOWN buttons,  
and press ENTER or RIGHT button.  
Still Mode  
These options will help prevent picture shake in still  
mode and display small text clearer.  
Re-enter Password  
1. Auto : When selecting Auto, Field/Frame mode will be  
automatically converted.  
-
-
-
-
2. Field : Select this feature when the screen shakes in  
the Auto mode.  
1. With the unit in Stop mode, press the SETUP  
button.  
0 ~ 9  
3. Frame : Select this feature when you want to see  
small letters more clearly in the Auto mode.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
Screen Messages  
Use to turn on-screen messages On or Off.  
3. Select Parental Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
6. Select Rating Level you want using UP/DOWN  
buttons. For example, if you select up to Level 6,  
discs that contain Level 7, 8 will not play.  
- To cancel the Rating Level, select No using RIGHT or  
ENTER in Use Password.  
Black Level  
Adjusts the brightness of the screen.(On/Off)  
Video Output  
Select Video Output.  
1. S-Video : Select when you want to use Video and  
S-Video Out.  
Setting Up the Rating Level  
e.g) Setting up in LEVEL6.  
2. Component (I-SCAN) : Select when you want to use  
Video and Component (Interlace) Out  
1. With the unit in Stop mode, press the SETUP button.  
RATING LEVEL  
3. Component (P-SCAN) : Select when you want to use  
Component (Progressive) Out.  
4. Use RIGHT or ENTER to select Yes if you want  
to use a password.  
The Enter Password screen appears.  
Level 8 Adult  
Level 7  
Level 6  
Level 5  
Level 4  
Level 3  
Level 2  
Level 1 Kids Safe  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
* If there is no Yes/No selection for 10 seconds at  
Display in the sub Menu, Video system returns to the  
previous menu.  
The player is locked (  
).  
PARENTAL SETUP  
Use Password  
:
No  
DISPLAY SETUP  
TV Aspect  
:
:
:
:
:
Wide  
Auto  
On  
Still Mode  
Screen Messages  
Black Level  
Video Output  
About the Change Password;  
On  
S-Video  
- Highlight Change Password using UP/DOWN buttons.  
- Press ENTER button.  
The Change Password screen appears.  
- Enter your new password. Enter the new password again.  
5. Enter your password.  
The Re-enter Password screen appears to  
confirm the password.  
3. Select Parental Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
DISPLAY SETUP  
Enter your password again.  
S-Video  
4. Enter your password.  
The Parental Setup screen appears.  
Note  
The player is locked (  
).  
Component (I-SCAN)  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
Component (P-SCAN)  
CREATE PASSWORD  
PASSWORD CHECK  
If you have forgotten your password, see Forgot  
Password in the Troubleshooting Guide.  
Enter Password  
Enter Password  
-
-
-
-
-
-
-
-
0 ~ 9  
0 ~ 9  
ENG-32  
ENG-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 34  
Controlling a TV with the Remote  
Troubleshooting  
The remote control can be compatible with various  
brands of TV by setting their control codes. The  
TOSHIBA code has initially been set to control  
TOSHIBA TVs.  
Table of Brand Codes  
Before requesting service (troubleshooting), please check the following.  
Action  
Problem  
Page  
BRAND  
TOSHIBA  
CODE  
PROG + 01  
Check the batteries in the remote. They may need replacing.  
Operate the remote control at a distance of no more than 20 feet.  
Operate the remote control within 30° angle on either side of the  
remote control sensor.  
No operations can be  
performed with remote.  
Setting Control Codes  
RCA/GE  
PROG + 02  
PROG + 03  
PROG + 04  
PROG + 05  
PROG + 06  
PROG + 07  
PROG + 08  
PROG + 09  
PROG + 10  
PROG + 11  
PROG + 12  
PROG + 13  
PROG + 14  
PROG + 15  
PROG + 16  
P5  
SONY  
1. Press TV to set the remote control operating your  
TV.  
Remove batteries and hold down one or more buttons for several  
minutes to drain the microprocessor inside the remote to reset it.  
Reinstall batteries and try to operate the remote again.  
MITSUBISHI  
JVC  
2. While holding down PROG. button enter the two  
diglts of your TVs brand code (listed right) using  
number buttons.  
HITACHI  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the DVD.  
P7  
Disc does not play.  
PANASONIC A  
SHARP NEW  
SANYO  
3. Release PROG.  
5.1 channel sound is reproduced only when the following condi-  
tions are met. :  
1) The DVD player is connected with the proper amplifier  
2) The disc is recorded with 5.1 channel sound.  
Check whether the disc being played has the Dolby 5.1 chmark  
on the outside.  
5.1 channel sound is not  
being reproduced.  
4. Point the remote control at your TV and use each  
button listed below to make sure your TV is  
operated correctly.  
P11  
MAGNAVOX  
GOLDSTAR NEW  
SAMSUNG  
SHARP OLD  
ZENITH  
P29~30  
TV POWER  
CH  
To turn the TV on or off.  
Check if your audio system is connected and working properly.  
In a SETUP Menu, is the Audio Output set to Bitstream?  
To select TV channels in the  
upper or lower direction.  
The features or action cannot be completed at this time because:  
1. The DVDs software restricts it.  
2. The DVDs software doesnt support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. Youve requested a title or chapter number or search time that  
is out of range.  
The  
screen.  
icon appears on  
TV VOL.  
To adjust the sound level.  
P14  
PANASONIC B  
PIONEER  
I.SELECT  
To select an external source  
such as a VCR.  
Number buttons  
To select TV channels.  
When selecting channels 1 to  
9, first enter 0 and then the  
desired number.  
Disc Menu doesnt appear.  
Check if the disc has a Menu.  
Play mode differs from the  
Setup Menu selection.  
Some of the functions selected in the Setup Menu may not work  
properly if the disc is not encoded with the corresponding function.  
P27~33  
100  
To substitute for 100 channel  
key.  
The screen ratio cannot  
be changed.  
P31  
The Screen Ratio is fixed on your DVD discs.  
DISPLAY  
ENTER  
To turn on or off TVs screen  
display.  
No audio.  
Make sure you have selected the correct Digital Output in the  
Audio Options Menu.  
P29~30  
To use for the TVs ENTER  
key.  
Press power on from a cold start with no disc in the unit. Press the  
The screen is blocked  
STOP (  
) and PLAY (  
) buttons simultaneously on the front  
P31~32  
P32~33  
panel for three seconds. The SELECT MENU LANGUAGE display  
will appear. Select the number button of the desired language.  
Important Note  
Some TVs may not respond to all the operations  
above, or may not be operated at all with this  
remote control. In this case, operate your TV with  
its own remote control.  
Press power on from a cold start with no disc in the unit. Press the  
Forgot password  
STOP (  
) and PLAY (  
) buttons simultaneously on the front  
panel for three seconds. The SELECT MENU LANGUAGE display  
will appear. Select the number button of the desired language.  
Press the SETUP select Setup, then press RIGHT or ENTER.  
Press Up or Down to select Parental Setup. The Parental Setup is  
now unlocked as indicated on the display. You can change your  
password.  
For some brands, several control codes (brand  
codes) are allocated. Try each of them until the  
buttons work on your TV.  
If you replace the remote controls batteries, set  
the brand code again.  
Go to the contents and find the section of the instruction book that  
contains the explanations regarding the current problem, and follow  
the procedure once again.  
If the problem still cannot be solved, please contact your nearest  
authorized service center.  
If you experience other  
problems.  
-
ENG-34  
ENG-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 36  
Specifications  
Power Requirements  
Power Consumption  
Weight  
AC 120 V, 60 Hz  
12W  
4.1 lbs  
General  
Dimensions  
(W) 16.9 in x (D) 8.1 in x (H) 1.8 in  
+41°F to +95°F  
Operating Temperature Range  
Operating Humidity Range  
10 % to 75 %  
Reading Speed : 11.45 ~ 15.09 ft/sec.  
Approx. Play Time  
(Single Sided, Single Layer Disc) : 135 min.  
DVD  
(DIGITAL VERSATILE DISC)  
CD : 5"  
(COMPACT DISC)  
Reading Speed : 15.75 ~ 18.37 ft/sec.  
Maximum Play Time : 74 min.  
Disc  
Reading Speed : 15.75 ~ 18.37 ft/sec.  
Maximum Play Time : 20 min.  
CD : 31/2"  
(COMPACT DISC)  
1 channel : 1.0 Vp-p (75 load)  
Composite Video  
Component Video  
Y : 1.0 Vp-p (75 load)  
Pr : 0.70 Vp-p (75 load)  
Pb : 0.70 Vp-p (75 load)  
Video  
Output  
Luminance Signal : 1.0 Vp-p (75 load)  
Chrominance Signal : 0.286 Vp-p (75 load)  
S-VIDEO  
L(1/L), R(2/R)  
2 Channel  
F/L, F/R, R/L, R/R, C/T, S/W  
5.1 Channel  
48 kHz Sampling : 4 Hz to 22 kHz  
96 kHz Sampling : 4 Hz to 44 kHz  
Audio  
*Frequency Response  
Output  
110 dB  
100 dB  
0.004 %  
*S/N Ratio  
*Dynamic Range  
*Total Harmonic Distortion  
*: Nominal specification  
Designs and specifications are subject to change without notice.  
Weight and dimensions are approximate.  
ENG-36  
ENG-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 38  
ENG-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Fryer HD63G Series User Manual
Technicolor Thomson Network Router 605 User Manual
Toshiba Model Vehicle 23L1400UC User Manual
Tripp Lite Network Card U244 001 R User Manual
Tripp Lite Surge Protector TLM812GF User Manual
True Fitness Elliptical Trainer 600EA User Manual
Ultimate Support Systems DJ Equipment Custom 3 User Manual
Univex Home Theater System MCD908 User Manual
Vanguard Heating Indoor Fireplace VSGF28PVA User Manual
Vornado Fan 530L User Manual