Introduction
Connections
2
18
26
34
58
70
DIGITAL VIDEO
Basic playback
DVD VIDEO PLAYER
Advanced
playback
SD-330ESB
Function setup
Others
OWNER’S MANUAL
P000365620
PM0010130010
©2003 Toshiba Corporation
S
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the required label
The rating plate and the safety caution are on the rear of the unit.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10.Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
12.Unplug this apparatus during lightning storms or when unused for long periods of time.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
13.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
14.When you use headphones, keep the volume at a moderate level. If you use the headphones continuously
with high volume sound, it may cause hearing damage.
15.Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
16.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
17.Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious
personal injury.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
18.Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal
injury and serious damage to the apparatus.
19.Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
Notes on handling
Notes on moisture condensation
When shipping the DVD video player, the original
shipping carton and packing materials come in handy.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD video player. Do not leave rubber or plastic
products in contact with the DVD video player for a
long time. They will leave marks on the finish.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
o
f
n
s
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long
period, the unit may not function properly in the
future. Turn on and use the DVD video player
occasionally.
Optical pick-up
lens
Moisture condensation occurs during the
following cases.
When you bring the DVD video player directly from a
cold place to a warm place.
Notes on locating
When you use the DVD video player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD video player in a
hot and humid place just after you move the unit from
an air conditioned room.
Place the DVD video player on a level surface. Do not
use it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded disc may
come off the proper position and cause damage to
the DVD video player.
When you place this DVD video player near a TV,
radio, or VTR, the playback picture may become poor
and the sound may be distorted. In this case, place
the DVD video player away from the TV, radio, or
VTR.
When you use the DVD video player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use the DVD video player when moisture
condensation may occur.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
video player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
If you use the DVD video player in such a situation, it
may damage discs and internal parts. Remove the
disc, connect the power cord of the DVD video player
to the wall outlet, turn on the DVD video player, and
leave it for two or three hours. After two or three
hours, the DVD video player will have warmed up and
evaporated any moisture. Keep the DVD video player
connected to the wall outlet and moisture
To obtain a clear picture
condensation will seldom occur.
The DVD video player is a high technology, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn down, the picture quality becomes
poor. To obtain a clear picture, we recommend regular
inspection and maintenance (cleaning or parts
replacement) every 1,000 hours of use depending on
the operating environment. For details, contact your
nearest dealer.
Wall outlet
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. VIDEO CDs and
audio CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Playback side
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes on Discs (continued)
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions of
this DVD video player. Some DVD video discs are
produced in a manner that allows specific or limited
operation during playback. As such, the DVD video
player may not respond to all operating commands. This
is not a defect in the DVD video player. Refer to
instruction notes of discs.
This DVD video player can play the following discs.
Maximum
playback time
Disc
Size
Disc Mark
Contents
Approx. 4 hours
(single sided disc)
12 cm
Audio
+
video
(moving
pictures)
Approx. 8 hours
(double sided disc)
“
” may appear on the TV screen during operation.
DVD
video
disc
A “ ” means that the operation is not permitted by the
DVD video player or the disc.
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Notes on region numbers
The region number of this DVD video player is 2. If
region numbers, which stand for their playable area, are
Approx. 74 minutes
Approx. 20 minutes
12 cm
2
printed on your DVD video disc and you do not find
Audio
+
video
(moving
pictures)
ALL
or
, disc playback will not be allowed by the player.
VIDEO
CD
(In this case, the DVD video player will display a
message on-screen.)
DIGITAL VIDEO
8 cm
On VIDEO CDs
Approx. 74 minutes
Approx. 20 minutes
12 cm
This DVD video player supports VIDEO CDs equipped
with the PBC (Version 2.0) function. (PBC is the
abbreviation of Playback Control.) You can enjoy two
playback variations depending on types of discs.
Audio
CD
Audio
8 cm
(CD
single)
• VIDEO CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD video
player in the same way as an audio CD.
• VIDEO CD equipped with PBC function
(Version 2.0)
The following discs are also available.
DVD-R discs of DVD video format
CD-R/CD-RW discs of CD-DA format
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or
non-standardized discs, etc., even if they may be
labeled as above.
• This DVD video player uses the PAL/NTSC colour
system, and cannot play DVD video discs recorded in
any other colour system (SECAM, etc.).
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
Advanced playback
SAFETY PRECAUTIONS ..........................2
IMPORTANT SAFETY INSTRUCTIONS ...4
Precautions ...............................................8
Notes on Discs..........................................9
Notes on region numbers ............................... 10
Accessing a Specific Location Directly ... 34
Entering the time of the desired location ........ 34
Playing Repeatedly.................................35
Repeating a title, chapter, or track.................. 35
Repeating a specific segment ........................ 35
Playing in a Favorite Order ....................36
Setting titles, chapters, or tracks in a favorite
Table of Contents ................................... 11
Identification of Controls .......................12
Front panel ..................................................... 12
Rear panel ...................................................... 12
DVD display.................................................... 13
Remote control ............................................... 14
Loading batteries ............................................ 15
Operating with the remote control .................. 15
order ............................................................. 36
Playing in Random Order ......................37
Playing titles, chapters or tracks in random
order ............................................................. 37
Zooming a Picture ..................................38
Zooming a picture........................................... 38
Selecting the Picture Enhancement
(E.P.M.) .....................................................39
Selecting the picture enhancement ................ 39
Connections
Connecting to a TV .................................18
Selecting the Sound Enhancement
(E.A.M.) ....................................................40
Selecting the sound enhancement ................. 40
Connecting to a TV
(Using the SCART socket) ........................... 18
Connecting to a TV
(Using the component video jacks) .............. 18
Connecting to a TV
(Using the phono type jacks)........................ 19
Selecting the Camera Angle ..................41
Changing the camera angle ........................... 41
Selecting Subtitles .................................42
Selecting a subtitle language ......................... 42
Connecting to Optional Equipment ......20
Connecting to an amplifier equipped with a
Dolby Digital decoder ................................... 21
Connecting to an amplifier equipped with
Selecting a Language.............................43
Selecting a playback audio setting ................. 43
Operating in the On-screen Display Mode... 44
Dolby Surround Pro Logic ............................ 21
Operating in the on-screen display mode....... 44
Connecting to an amplifier equipped with a
DTS decoder ................................................ 22
Connecting to an amplifier equipped with an
MPEG2 audio decoder ................................. 22
Connecting to an amplifier equipped with a
Playing MP3/WMA Files .........................46
Playing MP3/WMA files .................................. 46
Viewing JPEG Files ................................48
Starting from a thumbnail view ....................... 48
Viewing a single image................................... 51
Playing slide show .......................................... 53
Selecting a folder............................................ 54
digital audio input ......................................... 23
Basic playback
Playing a Disc .........................................26
Basic playback................................................ 26
Function setup
Customizing the Function Settings ......58
Setting procedure ........................................... 58
Setting details ................................................. 60
Variable Speed Playback .......................28
Playing in fast reverse or fast forward
directions ...................................................... 28
Playing frame by frame................................... 28
Playing in slow-motion .................................... 29
Resuming playback from the same location ... 29
Table of Languages ................................67
Others
Locating a Desired Section ...................30
Locating a title using the top menu................. 30
Before Calling Service Personnel .........70
Locating a desired section by entering the
corresponding number ................................. 31
Specifications .........................................71
Locating a specific chapter or track ................ 31
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls
See the page in
for details.
Front panel
ON/STANDBY indicator
26
PLAY button
/ / / /ENTER button
Disc tray
26
58
26
ON/STANDBY button
26
DVD display
13
ENTER
ON/STANDBY
ZOOM
DISPLAY RETURN
TOP MENU
MENU
OPEN/CLOSE
SKIP
PAUSE
STOP
PLAY
MENU button
TOP MENU button
STOP button
27
OPEN/CLOSE button 26
PAUSE button
27
30
RETURN button
SKIP buttons
31
58
DISPLAY button
44
ZOOM button
38
Remote sensor
15
Rear panel
When connecting the optical digital cable, remove
the cap and fit the connector into the jack firmly.
When not using the jack, keep the cap inserted
to protect it from dust intrusion.
VIDEO OUT (Y/PB/PR
(Component video) jacks
)
18
BITSTREAM/PCM OPTICAL
AC inlet
19
VIDEO OUT jack
21 22 23
AUDIO OUT jack
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
AV
ANALOG
6
AV (SCART) socket 18
BITSTREAM/PCM COAXIAL
21 22 23
AUDIO OUT jack
ANALOG AUDIO OUT (L/R) jacks 18 19
Power cord
S VIDEO OUT jack
19
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing of the FL DIM button on the remote
control changes the brightness of the display.
DVD display
FL DIM
Dimmed
Normal
Off
Total playing time indicator
Chapter number indicator
Memory playback indicator
Play mode indicator
Title number indicator
Track number
indicator
Random playback indicator
-
TITLE
TOTAL
CHP TRK
M R
A B
DVD
VCD
Multifunctional indicator (indicates operating status or
messages, etc.)
Angle icon indicator
DVD/VIDEO CD/CD indicator
Repeat playback indicator
When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches
them to the title/chapter/track number indicators. Some discs may not permit this operation.
The indicators vary depending on the kinds of discs you play.
DVD video disc
VIDEO CD
Audio CD
• During playback:
• During playback:
• During playback:
Example
Example
Example
TRK
TITLE
CHP
TRK
DVD
CD
VCD
Playing track 6
Playing track 6
Playing chapter 3 of title 2
Some discs may not display track
numbers or elapsed time.
Some discs may not display chapter
numbers or elapsed time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
OPEN/CLOSE
OPEN/CLOSE button 26
Power button 26
REV
FWD
SKIP
REV button 28
FWD button 28
SKIP buttons 31
PAUSE/STEP
TOP MENU
STOP
PLAY
PLAY button 26
ENTER button 30
PAUSE/STEP button 27 28
STOP button
27
MENU
MENU button*
TOP MENU button 30
Direction buttons 30
ENTER
(
/
/
/
)
RETURN
CLEAR
ANGLE
CLEAR button 31
RETURN button 58
SUBTITLE
AUDIO
ANGLE button 41
AUDIO button 43
SETUP DISPLAY ZOOM
SLOW
SLOW button 29
SETUP button 58
ZOOM button 38
DISPLAY button 44
FL DIM
E.A.M.
E.P.M. FL SELECT
FL DIM button
FL SELECT button
13
SUBTITLE button
E.A.M. button 40
E.P.M. button 39
42
SEARCH
13
1
4
7
2
5
8
3
6
T
T button 31
+10
Number buttons 31
9
0
RANDOM MEMORY
A-B RPT
REPEAT
RANDOM button 37
A-B RPT button
35
MEMORY button 36
REPEAT button 35
* MENU button
Use the MENU button to display the menu included on
many DVD video discs. To operate a menu, follow the
instructions in “Locating a title using the top menu.”
30
14
Download from Www.Somanuals.com. All Manuals Search And Download.
About the illustrations of the battery compartment
There are two types of battery compartment in the
supplied remote controls. (This does not mean a
difference in performance between the two.)
Refer to either illustration depending on the actual
remote control.
Loading batteries
Operating with the remote control
Open the cover.
Point the remote control at the remote
sensor and press the buttons.
1
2
1
30°
30°
Within about 7 m
Insert batteries (R6 size).
2
Distance: About 7 m from the front of the remote
sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct
sunlight or other illumination. If you do so, you may
not be able to operate the DVD video player via the
remote control.
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
Close the cover.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
3
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not open the remote control.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries.
Do not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage from
battery corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Read this chapter first to make all necessary
preparations.
Connecting to a TV
(Using the SCART socket)
Connecting to a TV
(Using the component video jacks)
Connecting to a TV
(Using the phono type jacks)
Connecting to an amplifier
equipped with a Dolby Digital
decoder
Connecting to an amplifier
equipped with Dolby Surround
Pro Logic
Connecting to an amplifier
equipped with a DTS decoder
Connecting to an amplifier
equipped with an MPEG2 audio
decoder
Connecting to an amplifier
equipped with a digital audio
input
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 43
.
Connect the DVD video player directly to your TV. If you connect the DVD video player to a VTR, TV/VTR
combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.
Connecting to a TV (Using the SCART socket)
• Normal TV
• TV compatible with
S video signals
SCART cable
• RGB monitor
Signal flow
To AV
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
AV
ANALOG
To SCART input
• Make the following setting.
On-screen
display
See “Customizing the Function Settings” beginning from
.
58
TV
“Audio Out Select”
“Analog 2ch”
“Video Out Select”
“Video”
61
60
Normal TV
To wall outlet
TV compatible with
S video signals
“S Video”
“RGB”
“Analog 2ch”
“Analog 2ch”
RGB monitor
Connecting to a TV (Using the component video jacks)
To PB
VIDEO
OUT
TV or monitor with
component video
inputs
To PR
VIDEO
OUT
To Y
VIDEO
OUT
To PR
video
input
Signal flow
VIDEO
Y
P
B
PR
To PB video
input
VIDEO OUT
AUDIO OUT
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
AV
ANALOG
To Y video
input
To ANALOG AUDIO OUT
(R: red, L: white)
To audio input
Audio cable
Component video outputs/inputs
• Make the following setting.
To wall outlet
Some TVs or monitors are equipped with
On-screen
display
See “Customizing the Function Settings”
beginning from
component video inputs. Connecting to these
.
58
inputs allows you to enjoy higher quality picture playback.
TV
“Video Out Select”
“Audio Out Select”
“Analog 2ch”
60
61
Actual labels for component video inputs may vary depending on
the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR
)
TV or monitor
with component
video inputs
“Video”
or
“S Video”
In some TVs or monitors, the colour levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV (Using the phono type jacks)
Select the connection type depending on the TV. (TV equipped with an S video input / Normal TV)
Signal flow
TV equipped with
an S video input
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
AV
ANALOG
To audio
input
To
S video
input
To ANALOG AUDIO OUT
(R:red, L:white)
To S VIDEO OUT
S video cable
Audio cable
To wall outlet
Signal flow
Normal TV
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
AV
ANALOG
To audio
input
To video
input
(yellow)
To VIDEO OUT
(yellow)
To ANALOG AUDIO OUT
(R:red, L:white)
Audio/video cable
• Make the following setting.
To wall outlet
On-screen
display
See “Customizing the Function Settings” beginning from
.
58
TV
“Audio Out Select”
“Video Out Select”
61
60
“Video”
or
“S Video”
TV equipped with an
S video input
“Analog 2ch”
Normal TV
No need to set.
“Analog 2ch”
Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your TV.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
• For connection to your TV, see “Connecting to a TV”
Warning
18 19
.
• When you are connecting (via the BITSTREAM/PCM
AUDIO OUT jack) an AV decoder that does not have
Dolby Digital, Digital Theater Systems (DTS) or MPEG2
decoding function, be sure to set “Audio Out Select” to
43
• For details of output sound, see
.
• This section uses the following reference marks.
58 61
“PCM” from the on-screen displays
. Otherwise,
: Front speaker
: Rear speaker
: Sub woofer
high volume sound may damage your hearing as well as
the speakers.
• When playing DTS-encoded discs (audio CDs),
excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system,
you should take proper precautions when the ANALOG
AUDIO OUT (L/R) jacks of the DVD video player are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external 5.1 channel
DTS Digital Surround™ decoder system must be
connected to the BITSTREAM/PCM AUDIO OUT jack of
the DVD video player.
: Center speaker
: Signal flow
Notes
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack
of the DVD video player to the AC-3 RF input of a Dolby
Digital Receiver. This input on your A/V Receiver is
reserved for Laserdisc use only and is incompatible with
the BITSTREAM/PCM AUDIO OUT jack of the DVD video
player.
• Connect the BITSTREAM/PCM AUDIO OUT jack of the
DVD video player to the “OPTICAL” or “COAXIAL” input of
a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment
as well.
• When you connect the DVD video player to other
equipment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any
connections.
• The output sound of the DVD video player has a wide
dynamic range. Be sure to adjust the receiver’s volume to
a moderate listening level. Otherwise, the speakers may
be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD video player’s power cord. If you leave the amplifier
power on, the speakers may be damaged.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Manufactured under license from Dolby
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a
Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. Copyright 1992-1997
Dolby Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
“Audio Out Select” “Bitstream”
Recording system
Select:
Page
Amplifier equipped with a
Dolby Digital decoder
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
58
61
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
ANALOG
D
43
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
Connect either.
75 Ω coaxial cable
Optical digital cable
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
• Make the following setting.
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
On-screen display
Select:
Page
58
61
“Audio Out Select” “Analog 2ch”
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an
amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s
owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro
Logic sound.
Be sure to set “Audio Out Select”
to “Analog 2ch” when you enjoy
sounds of Dolby Surround Pro
Logic using this connection.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
Amplifier equipped with
Dolby Surround Pro Logic
VIDEO
Y
P
B
PR
*
VIDEO OUT
AUDIO OUT
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
ANALOG
To audio input
To ANALOG AUDIO OUT
Audio cable
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment (continued)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVD video discs or audio CDs.
“DTS” and “DTS Digital Out” are
trademarks of Digital Theater Systems,
Inc.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVD video discs or audio CDs.
• Use DVD video discs or audio
CDs encoded via the DTS
recording system.
• Make the following setting.
Amplifier equipped with
a DTS decoder
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
On-screen display
“Audio Out Select” “Bitstream”
Recording system DTS
Select:
Page
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
ANALOG
58
61
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
Connect either.
43
75 Ω coaxial cable
Optical digital cable
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
• Use DVD video discs encoded via
the MPEG2 recording system.
• Make the following setting.
You can enjoy motion picture and live concert DVD video discs with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio
decoder or MPEG2 audio processor.
On-screen display
“Audio Out Select” “Bitstream”
Recording system MPEG2
Select:
Page
58
61
Amplifier equipped with an
MPEG2 audio decoder
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
43
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
ANALOG
To COAXIAL
type digital
audio input
To OPTICAL
type digital
audio input
Connect either.
75 Ω coaxial cable
Optical digital cable
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
• Make the following setting.
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers).
On-screen display
Select:
Page
58
61
“Audio Out Select”
“PCM”
VIDEO
Y
PB
PR
Amplifier equipped with
a digital audio input
VIDEO OUT
AUDIO OUT
R
L
COAXIAL OPTICAL
BITSTREAM/PCM
DIGITAL
S
ANALOG
To COAXIAL
To OPTICAL
type digital
audio input
type digital
audio input
Connect either.
75 Ω coaxial cable
Optical digital cable
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
Begin your operation.
Playing a Disc
Variable Speed Playback
Locating a Desired Section
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Playing a Disc
This section shows you the basics on how to play a disc.
ON/STANDBY indicator
3
1
/
/ENTER
STOP PLAY
2
,
4
ENTER
ON/STANDBY
ZOOM
DISPLAY RETURN
TOP MENU
MENU
OPEN/CLOSE
SKIP
PAUSE
STOP
PLAY
TOP MENU MENU
PAUSE
DVD
VCD
CD
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD video player.
Press the power button (ON/STANDBY).
Press OPEN/CLOSE to close the disc
4tray.
1
The DVD video player turns on and
the colour of the ON/STANDBY
indicator changes from red (standby)
to green (on).
Playback starts.
OPEN/CLOSE
If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
When the DVD video player is turned on for
the first time, a message appears. Press
ENTER, and make the proper settings before
using the top menu.”
30
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD video disc.)
proceeding to step 2.
66
Press OPEN/CLOSE.
2
3
Note
The disc tray opens.
29
For resuming playback, see
.
OPEN/CLOSE
To start playback in the stop mode
Press PLAY.
Place the disc on the disc tray.
PLAY
With the playback
side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the
DVD video player to malfunction.
• Do not place a disc which is unplayable in this DVD
video player.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain a higher quality picture
2, 4
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD video player, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
1
PAUSE/STEP
PLAY
STOP
MENU
ENTER
/
DVD VCD
CD
About
DVD VCD
CD
The
icons on the heading bar show the playable discs for the
function described under that heading.
DVD
: You can use this function with DVD video discs.
: You can use this function with VIDEO CDs.
: You can use this function with audio CDs.
TOP MENU
VCD
CD
To pause playback (still mode)
About the screen saver
Press PAUSE/STEP during playback.
If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the DVD video
player automatically appears (when “Screen Saver” is
set to “On” 63 ). To turn off the screen saver, press the
PLAY button.
PAUSE/STEP
To resume normal playback, press
the PLAY button.
• Sound is muted during still mode.
To stop playback
Automatic Power Off function
Press STOP.
If the DVD video player is stopped, or the screen saver
is engaged for approximately 20 minutes, the DVD
video player will automatically turn itself off.
STOP
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
OPEN/CLOSE
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Notes
• Do not move the DVD video player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD video player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video
player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
STOP button on your remote control once the movie is completed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
REV
Variable Speed Playback
FWD
You can play discs at various speeds, and resume playback from the location
where you stopped playback.
PLAY
STOP
PAUSE/STEP
SLOW
DVD
VCD
CD
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
Press REV or FWD during playback.
REV
FWD
REV: Fast reverse playback
FWD: Fast forward playback
PLAY
Each time you press the REV or
FWD button, the playback speed
changes.
Notes
• The DVD video player mutes sound and omits subtitles
during reverse and forward scan of DVD video discs.
However, the DVD video player plays sound during fast
forward or fast reverse play of audio CDs.
• The playback speed may differ depending on the disc.
DVD
VCD
Playing frame by frame
To resume normal playback
Press PLAY.
Press PAUSE/STEP during still playback.
PAUSE/STEP
Each time you press the PAUSE/
PLAY
STEP button, the picture advances
one frame.
Note
The sound is muted during frame by frame playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
VCD
Playing in slow-motion
To resume normal playback
Press PLAY.
Press SLOW during playback.
SLOW
Each time you press the SLOW
PLAY
button, the slow-motion speed
changes.
Note
The sound is muted during slow-motion playback.
DVD
VCD
CD
Resuming playback from the same location
To start playback from the beginning regardless
of the location where you stopped playback
1 Press STOP twice.
Press STOP at the location where you
want to interrupt playback.
1
2
STOP
The DVD video player memorizes
STOP
The DVD video player’s memory is
the location where playback is
stopped.
cleared.
2 Press PLAY.
Press PLAY.
PLAY
DVD
Playback starts from the
beginning of the current title.
The DVD video player resumes
playback from the location where
you stopped playback.
PLAY
VCD
CD
Playback starts from the
beginning of the disc.
• If you want to return to the beginning of a DVD video
disc, open and close the disc tray once with the
OPEN/CLOSE button before pressing the PLAY
button.
Notes
• The DVD video player’s memory is also cleared when:
–you change the parental lock setting 64 or select a disc
menu language 62
.
65
–you play a PBC-featured VIDEO CD while “PBC”
to “On”.
is set
–you open the disc tray.
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while the
DVD video player keeps a location in the memory may
function only after the memory is cleared.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
TOP MENU
Locating a Desired Section
/
/
/
ENTER
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks. You can quickly locate any specific title, chapter, or track.
DVD video disc
Title 1
Title 2
VIDEO CD/audio CD
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Track 1
Track 2
Track 3
Track 4
Track 5
DVD
Locating a title using the top menu
Press TOP MENU.
Press ENTER.
1
3
TOP MENU
The top menu appears on the TV
screen.
Playback starts from chapter 1 of the
selected title.
ENTER
e.g.
TITLE 1
TITLE 3
TITLE 2
TITLE 4
Notes
• The instructions above describe basic procedures which
may vary depending on the contents of the DVD video disc.
If different instructions appear on the TV screen, follow those
instructions.
• If you display the top menu during playback and press the
TOP MENU button again without selecting any title, the DVD
video player may resume playback from the point where you
first pressed the TOP MENU button (depending on the actual
DVD video disc.)
Press
want.
/
/
/
to select the title you
2
If the titles in the top menu are
assigned a number, you can directly
locate a specific title by pressing its
designated number with the number
buttons.
ENTER
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that
displays the top menu as TITLE button.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SKIP
PLAY
/
/
/
ENTER
CLEAR
T
Number buttons
DVD
VCD
CD
Locating a desired section by entering the corresponding number
Press T.
Repeat steps 2 and 3 if necessary.
1
4
5
If you are using a VIDEO CD/audio CD, skip step 2,
then at step 3, enter the number for the track you
want using the number buttons.
Press PLAY or ENTER.
SEARCH
e.g.
PLAY
Playback starts from
the selected section.
–
:
––:––
1
1
T
ENTER
Press
/
to select a section you want
to locate.
2
3
e.g. When you want to locate a chapter.
Notes
• Pressing the CLEAR button resets the numbers. To clear the
display, press the T button several times.
• This method of locating a title is available only on a disc that
contains title numbers.
ENTER
–
:
––:––
1
1
Press
section.
/
to enter a number of the
Also the number buttons are
available.
ENTER
e.g. To enter 25
+10
+10
5
2
5
or
DVD
VCD
CD
Locating a specific chapter or track
Notes
Press SKIP
or
repeatedly to display
• Some titles may not display chapter numbers.
• If you press and hold the SKIP or button on the front
panel during playback, the DVD video player performs fast
reverse or fast forward playback. You can vary the speed by
pressing the button repeatedly.
the chapter or track number you want.
Playback starts from the selected chapter or track.
SKIP
To locate succeeding chapters or
To locate chapters or tracks during fast reverse or fast
forward playback, first press the PLAY button to resume
tracks.
SKIP
Playback starts from the beginning of
normal playback, then use the SKIP
or
button.
the current chapter or track.
When you press twice, playback starts
from the beginning of the preceding
chapter or track.
• When you set “Title Stop” to “Off” 65 , you can access
chapters in another title. If you go back to the preceding title
by pressing the SKIP
button, the DVD video player
locates the first chapter of the title. When “Title Stop” is set
to “On,” you can access chapters only within the current title.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Customizing the performance of your DVD video player.
Accessing a Specific Location
Directly
Playing Repeatedly
Playing in a Favorite Order
Playing in Random Order
Zooming a Picture
Selecting the Picture
Enhancement (E.P.M.)
Selecting the Sound
Enhancement (E.A.M.)
Selecting the Camera Angle
Selecting Subtitles
Selecting a Language
Operating in the On-screen
Display Mode
Playing MP3/WMA Files
Viewing JPEG Files
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Accessing a Specific Location Directly
You can access a specific location by entering its corresponding time (hours,
minutes, seconds).
3
3
1
2
DVD
VCD
CD
Entering the time of the desired location
Notes
Press T several times.
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you specified.
• This method for accessing specific locations is available
only within the current title of the DVD video disc or within
the current track of the VIDEO CD/audio CD.
1
2
3
SEARCH
You may have to press further
depending on the disc. Press the
button repeatedly until the clock icon
is highlighted.
T
e.g.
–
:
––:––
1
1
Press the number buttons to enter the
time.
e.g.
1
2
5
3
0
:
:
1
1
1 25 30
Press PLAY or ENTER.
PLAY
Playback starts from
the desired location.
ENTER
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Repeatedly
You can play a specific title, chapter, track, or segment repeatedly.
(Title repeat, chapter/track repeat, A-B repeat)
PLAY
CLEAR
REPEAT
A-B RPT
DVD
VCD
CD
Repeating a title, chapter, or track
Press REPEAT.
Press PLAY.
1
2
PLAY
REPEAT
Each time you press the REPEAT
button, the repeat mode changes as
follows.
The DVD video player starts repeat
playback.
Press the PLAY button within about
5 seconds after you press the
REPEAT button.
Chapter Repeat
To resume normal playback
Press CLEAR.
DVD
Chapter Repeat Repeats the current
chapter.
CLEAR
DVD Title Repeat
Repeats the current
title.
Repeats the current
track.
VCD
CD
Track Repeat
Note
DVD
VCD
CD
Some discs may not permit repeat operation.
All Repeat
Repeats the entire
disc.
Repeat Off
Resumes normal
playback.
DVD
VCD
CD
Repeating a specific segment
To resume normal playback
Press CLEAR or A-B RPT.
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
1
2
CLEAR
A-B RPT
or
A-B RPT
A–
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles 41
• You can specify a segment only within the current title or
track (VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
.
Press A-B RPT again at the end of the
segment (point B).
A-B RPT
The DVD video player automatically
returns to point A and starts repeat
playback of the selected segment
(A-B).
A–B
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Playing in a Favorite Order
You can combine your favorite titles, chapters, or tracks and play them in the
order you determine. You can program up to 30 selections into the memory.
(Memory playback)
3
/
/
/
2
CLEAR
2
1
DVD
VCD
CD
Setting titles, chapters, or tracks in a favorite order
To change the programmed selections
1 While the display appears on the TV screen, press
Insert a disc and press MEMORY during
stop.
1
2
/
/
/
to move the highlighted bar to the item
you want to change.
2 Change the selection following the instructions in
MEMORY
The following display appears.
e.g.
step 2.
:
--
:
---
1 T
2 T
3 T
4 T
5 T
6 T
7 T
CT
CT
CT
CT
CT
CT
CT
To cancel the programmed selections
1 While the display appears on the TV screen, press
:
:
:
:
:
:
--
--
--
--
--
--
:
:
:
:
:
:
---
---
---
---
---
---
/
to move the highlighted bar to the item you
T: Title number
CT: Chapter number
or track number
want to cancel.
2 Press CLEAR.
To resume normal playback from memory
playback
Select the items in the order you want
by pressing the number buttons, then
ENTER for each item.
Press CLEAR.
CLEAR
The memory playback indicator
disappears.
Each time you press the
/
button, the spaces
of “T” and “CT” are highlighted in turn. Highlight
where you want to enter, then press the
corresponding number buttons.
To program during playback
If you press the MEMORY button during playback, a
programming display appears.
To select another chapter in the same title, you do
not need to select the title number.
Follow steps 2 and 3.
To select tracks from a VIDEO CD/audio CD in
order, press the number buttons for the track,
then press the ENTER button for each selection
you want.
Notes
• Some discs may not permit memory playback operation.
• If you press the REPEAT button during memory playback,
the DVD video player repeats the current memory playback.
• If you press the MEMORY or RETURN button while the
display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you turn
off the DVD video player.
Press PLAY while the display appears
on the TV screen.
3
PLAY
The DVD video player starts
memory playback.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in Random Order
You can play titles, chapters within a title, or tracks in random order.
(Random playback)
2
CLEAR
1
DVD
VCD
CD
Playing titles, chapters or tracks in random order
To resume normal playback
Press CLEAR.
Press RANDOM.
1
CLEAR
RANDOM
Each time you press the RANDOM
button, the random playback mode
changes as follows.
Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction
with the memory playback function.
Chapter Random
DVD
DVD
Plays chapters within
the current title in
random order.
Chapter Random
Plays titles in random
order.
Title Random
Track Random
VCD
CD
Plays tracks in
random order.
Resumes normal
playback.
Random Off
If you press the RANDOM button
during playback, the DVD video
player automatically starts random
playback after finishing the current
title, chapter or track.
Press PLAY.
2
PLAY
The DVD video player starts random
playback.
Press the PLAY button within about
5 seconds after you press the
RANDOM button.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
/
/
/
ENTER
CLEAR
ZOOM
DVD
Zooming a picture
To resume normal playback
While “ZOOM” is selected, press ZOOM repeatedly to
turn off the icon.
Picture restores the size when the icon disappears.
Press ZOOM during normal, slow or still
playback.
ZOOM
The DVD video player enters the
zoom playback mode and displays
the icon.
ZOOM
e.g.
• The ENTER button cannot cancel zoom playback if
you have turned off the icon by selecting “EXIT.” To
restore normal picture size, press the ZOOM button
to display the icon, then further press the ZOOM
button until the icon turns off.
Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as described.
• Zooming does not work on subtitles or menus included on
DVD video discs.
: As you repeatedly press the ENTER
(or ZOOM) button while “ZOOM” is
selected, the magnification level
changes.
Variation of the levels includes
reducing.
• While the icon is displayed, the
/
/
/
buttons cannot
work on menus included on DVD video discs. If you want to
view the menus, turn off the icon.
• The magnification level varies depending on the picture size
you select. 60
: If you press the ENTER button while
“EXIT” is selected, you can turn off
the icon, keeping the current
magnification level.
You can shift the highlight within the
icon by the
/
/
/
buttons.
If you press and hold the
/
/
/
buttons, the zoom point shifts.
ENTER
CLEAR
Pressing the CLEAR button restores
the zoom point to the center of the
picture.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Enhancement (E.P.M.*)
You can easily switch the picture enhancement to your preference.
2
*E.P.M.: Enhanced Picture Mode
ENTER
1, 2
DVD
VCD
CD
Selecting the picture enhancement
To turn off the picture enhancement selection
Press ENTER.
Press E.P.M.
1
E.P.M.
The picture enhancement selection
appears.
Alternatively leave the DVD video
player unoperated for about 5
seconds after having made the
ENTER
selection.
Note
Actual effects to pictures may vary depending on the TV.
Make the selection to your preference.
Select the picture enhancement by
pressing E.P.M. or / .
2
Each time you press the button, the picture
enhancement changes.
Light:
Brighter than in “Normal”.
Normal:
Standard black level.
Movie1:
To raise brightness to clarify details.
Movie2:
To deepen colours.
Animation:
To raise contrast enhancing colours.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference.
2
*E.A.M.: Enhanced Audio Mode
ENTER
1, 2
DVD
Selecting the sound enhancement
To exit the audio enhancement selection
Press ENTER.
Press E.A.M.
1
E.A.M.
The sound enhancement selection
appears.
Alternatively leave the DVD video
player unoperated for about 5
seconds after having made the
selection.
ENTER
Notes
• Actual effects to sounds may vary depending on the
speakers. Make the selection to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select “Normal”.
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
• Selecting “Dialogue” disables “Dynamic Range Control”
function
.
61
Select the sound enhancement by
pressing E.A.M. or / .
2
Manufactured under license from QSound Labs, Inc. U.S. patent
Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign
counterpart. Copyright QSound Labs, Inc. 1998-2002. QXpanderTM
is a trademark of QSound Labs, Inc. All rights reserved.
Each time you press the button, the sound
enhancement changes.
Normal:
Normal sound.
3D*:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue*:
To control dynamic range to make
dialogues easier to hear.
• To use this enhancement on
sounds output from the
BITSTREAM/PCM AUDIO OUT
jack, be sure to set “Audio Out
61
Select” to “PCM”.
* Effective only during playback of
Dolby Digital recorded discs.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Camera Angle
If the scene was recorded from multiple angles, you can easily change
the camera angle of the scene you are watching.
2
ENTER
1, 2
CLEAR
DVD
Changing the camera angle
Notes
Press ANGLE while playing a scene
recorded with multiple angles.
• You can change the camera angle during still playback. The
camera angle changes to the new setting when you resume
normal playback.
• If you pause a picture immediately after changing a camera
angle, the resumed playback picture may not display the new
camera angle.
1
ANGLE
While playing a scene recorded with
multiple angles, the angle icon (
flashes in the DVD display.
Press the ANGLE button while the
angle icon is flashing.
)
e.g.
1
2
3
Press ANGLE or
/
while the angle
number is displayed on the TV screen.
2
ANGLE
Each time you press the ANGLE
button, the camera angle changes.
You can change the camera angle
ENTER
directly by pressing the number
buttons corresponding to its angle
number instead of using the
buttons.
/
To turn off the display, press the
CLEAR or ENTER button.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Selecting Subtitles
You can display subtitles on the TV screen and select a subtitle language
from those included on the DVD video disc.
/
/
/
ENTER
SUBTITLE
CLEAR
Good evening!
Bonsoir!
`Buenas tardes!
DVD
Selecting a subtitle language
To turn subtitles on or off
1 Press SUBTITLE during playback.
Press SUBTITLE during playback.
1
SUBTITLE
SUBTITLE
The current subtitle setting is
displayed.
2 Press
/
while the subtitle setting is displayed on
e.g.
the TV screen, to select “On” or “Off.”
Off
JP
FRE 1
SP
N
1
ENTER
A
1
Notes
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 67
• Some DVD video discs are set to display subtitles
automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear
immediately after you select “On.”
• Some DVD video discs will allow you to make subtitle
selections and turn subtitles on or off only via the disc menu.
Press SUBTITLE or
/
while the subtitle
setting is displayed on the TV screen.
2
SUBTITLE
Each time you press the SUBTITLE
button, the subtitle languages
included on the DVD video disc
change.
ENTER
To turn off the subtitle setting display,
press the CLEAR or ENTER button.
Notes
• When you turn on the DVD video player or replace a disc, the player returns to the initial default setting 62
.
When you select a subtitle language which is not included on the disc, the DVD video player plays a prior language
programmed on the disc.
• During some scenes, the subtitles may not appear immediately after you change the subtitle language.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Language
You can select a preferred language and sound recording system from those
included on the DVD video disc.
2
ENTER
1, 2
CLEAR
Good morning!
¡Buenos días!
Bonjour!
DVD
VCD
Selecting a playback audio setting
Press AUDIO during playback.
Press AUDIO or
/
while the audio
setting is displayed on the TV screen.
1
2
AUDIO
AUDIO
The current audio setting is
displayed.
Each time you press the AUDIO
button, the audio settings included
on the DVD video disc change.
e.g.
ENTER
ENG
ENG2
1
PCM 2CH
D 2CH
If you press the
can select output sound format. 61
/
buttons, you
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 67
To turn off the audio setting display, press the
CLEAR or ENTER button.
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting 62
If you select a sound track which is not included on the disc,
the DVD video player plays a prior sound track programmed
on the disc.
Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the
AUDIO button repeatedly during playback.
.
AUDIO
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
Output sound conversion table (sampling frequency/quantization bit)
and output jacks on the rear panel
Audio selection from the menu 58 61
“Bitstream”
“Analog 2ch”
“PCM”
Recording system
Dolby Digital
Discs
BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO
jack
OUT jacks
jack
OUT jacks
jack
OUT jacks
Bitstream
48 kHz/20 bit
Bitstream
48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit
48 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
DVD video
disc
Linear PCM
96 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit
96 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit
96 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit
96 kHz/24 bit 48 kHz/16 bit
Bitstream
Bitstream
Bitstream
Bitstream
DTS
MPEG1, MPEG2
MPEG1
48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
VIDEO CD
Audio CD
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
Linear PCM 44.1 kHz/16 bit
DTS
44.1 kHz/16 bit
(Noise)
Bitstream
(Noise)
Bitstream
(Noise)
Bitstream
: 3D sound enhancement can function.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Operating in the On-screen Display Mode
When you turn on the on-screen display, you can view information on operational
status and access features and settings.
/
ENTER
DISPLAY
DVD
VCD
CD
Operating in the on-screen display mode
Press DISPLAY.
DISPLAY
The following display appears.
Each time you press the DISPLAY button, the on-screen display changes as follows.
See the pages in for details on the features.
e.g. When playing a DVD video disc
Select by pressing the
button (except 1)) to access the feature.
buttons, then press the ENTER
45
/
BIT
RATE
1)
1)
1)
Current selections. For details, see the respective pages.
40
39
61
38
(BST: Bitstream / 2CH: Analog 2ch / PCM: PCM)
1
Meaning of the icon and the status information
2)
Off
1
VCD
(
: Not displayed.)
1
1
Displays DVD-Text data (or CD-Text data when playing an audio CD) if included on the disc.
(Some letters may not be displayed properly depending on the disc.)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
(1): There is no need to press the ENTER button.)
1) : Title number (Track number)
To turn it off, select “Bit Rate Off.”
Locate a title or track using the number
The following operations also select “Bit Rate
Off”.
31
buttons.
– Opening the disc tray.
– Turning the power off.
1) : Chapter number
Locate a chapter using the number buttons.
31
: To turn off the display.
1) : Elapsed time of the current title / remaining
time of the current title (2))
: E.A.M. (Enhanced Audio Mode) setting 40
: E.P.M. (Enhanced Picture Mode) setting 39
: To zoom a picture. 38
To enter the time to locate a desired location.
34
43
: Audio setting
42
: Subtitle setting
: “Audio Out Select” setting 61
: To stop playback. 27
41
: Angle setting
: Bit rate (Mbit/s)
BIT
RATE
Amount of picture, sound and subtitle data in
the DVD video disc transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
: Playback starts from the beginning of the
current chapter or track.
31
: Fast reverse playback 28
To keep the bit rate display on-screen:
Press the
/
buttons to select “Bit Rate
On” then press the ENTER button.
: To start playback. 26
e.g.
BIT
RATE
: Fast forward playback 28
: To locate succeeding chapters or tracks. 31
: To begin slow motion playback. 29
: To pause playback. 27
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
2
Playing MP3/WMA Files
PAUSE/STEP
PLAY
You can play MP3/WMA files that have been recorded on a CD-R or CD-ROM on
the DVD video player.
3
/
/
/
ENTER
DISPLAY
Playing MP3/WMA files
Preparations
• Make sure that a disc you want to play is compatible with this DVD video player. 47
• Set “Priority Contents” to “Audio” from the on-screen display. 65
Selecting a track (file) in the disc
Place a CD that contains MP3/WMA
files on the disc tray.
1 Press DISPLAY.
1
2
2 Select the “
ENTER.
” icon using
/
then press
A list of tracks appears.
Press OPEN/CLOSE to load the disc.
3 Press
play.
/
/
/
to select a track you want to
Playback starts.
OPEN/CLOSE
(Pressing
/
turns the pages.)
The current track being played is highlighted in
green.
To stop playback, press STOP.
4 Press ENTER to begin playback of the selected
3
track.
STOP
Notes
• You can select a track also by designating a track number.
Press the T button, and press the buttons to select a
/
track number, then press the ENTER button.
• To turn off the on-screen display, press the DISPLAY
button several times.
To pause playback
Press PAUSE/STEP during playback.
• Letters of a file/folder name overflowing the given space
are not displayed.
PAUSE/STEP
To resume normal playback, press
the PLAY button.
Notes
• An interval between a WMA file and an MP3 file will be longer than that for two files of the same format.
• WMA files may take a longer time to begin.
• Some discs may not permit this operation.
• WMA tracks copy-protected cannot be played.
• The BITSTREAM/PCM jack outputs MP3/WMA sounds in the linear PCM format regardless of the current “Audio Out Select”
selection
.
61
• If you stop playback by pressing the STOP button, and then press the PLAY button, playback will start from the beginning of
the track.
31
35
37
and RANDOM functions are also available.
• The SKIP
, REPEAT
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable files
MP3/WMA disc compatibility with this player is limited as follows:
• Playable discs:
CD-ROM, CD-R (650MB / 74 min. only)
CD-RW is not recommendable.
44.1 kHz only
• Sampling frequency:
• Bit rate:
WMA: 48 kbps - 192 kbps (CBR)
MP3: 32 kbps - 320 kbps (CBR)
Mode 1, Mode 2 XA Form 1
• CD physical format:
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and numerals only, and must incorporate “MP3” or
“WMA” extension.
e.g.“********.MP3”, “********.WMA”
Less than 256
Less than 1000
• Total number of folders:
• Total number of files:
• WMA codec version:
V7 or V8 (Stereo sound only)
This DVD video player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3/WMA files). Given the fact that technology in this
area is still maturing, Toshiba cannot guarantee that all
genre of recordable discs will produce optimal playback
quality. The technical criteria set out in this owner’s
manual are meant as a guide only.
Customers should also note that permission is required
in order to download MP3 files and music from the
internet. Toshiba has no right to grant such permission.
Permission should always be sought from the copyright
owner.
Microsoft, Windows Media, and the Windows
Logo are trademarks or registered trademarks
of Microsoft Corporation in both the United
States and other countries.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Viewing JPEG Files
You can play JPEG files that have been recorded on a CD-R on the DVD video player.
You can select a preferred view: a page of 6 thumbnail images, a single image view, and slide show
of a selected folder.
Also, rotating, enlarging and shifting of each image can be possible.
Thumbnail view
Single image view
Slide show
Starting from a thumbnail view
Preparations
• Prepare a disc that contains JPEG files you want to view. 55
• Set “Priority Contents” to “Photo” from the on-screen display. 65
• Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function
settings via the on-screen displays of the DVD video player. If the TV is adjusted to other sizes, e.g. “WIDE,”
images will appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.
Press OPEN/CLOSE to open the disc tray.
1
OPEN/CLOSE
Place a disc that contains JPEG files on the disc tray.
Press OPEN/CLOSE.
2
3
The disc tray closes, and the DVD video player reads the loaded disc.
OPEN/CLOSE
After completion of reading, the DVD video player enters either of the following modes, and provides the
respective displays, depending on the condition of the disc contents. Proceed to steps described below.
A thumbnail view appears.
(Automatic mode)
A list of folders in the disc appears.
(Selection mode)
e.g.
Header
e.g.
A
Z
Z
A
Icon of reverse order
50
Number of a current selection / Number of images
to play
Proceed to step 4 on 49
.
Refer to 54 , “Selecting a folder.”
48
Download from Www.Somanuals.com. All Manuals Search And Download.
1, 3
4
6
4
4
Turn the page if necessary.
4Press
/
/
/
to select the last image of 6, then press .
to select the first image of 6, then press .)
(Press
/
/
/
ENTER
Selecting
(or
) then pressing the ENTER button also turns the pages.
Alternatively,
Press SKIP.
SKIP
: To view the succeeding 6 images.
: To view the previous 6 images.
The page changes as follows:
1
4
2
5
3
6
7
8
9
7
8
9
13 14 15
13 14 15 19 20 21
16 17 18 22 23 24
SKIP
SKIP
10 11 12
10 11 12 16 17 18
Select the viewing options at your preference.
5- Viewing a single image: See
51
.
53
- Playing slide show: See
.
To quit the JPEG playback, press STOP.
6
STOP
• If you press the PLAY button after pressing the STOP button, you can return to the thumbnail
view.
• Pressing the OPEN/CLOSE button to open the disc tray can also quit the playback.
Notes
• If you display a thumbnail view from the automatic mode and leave it unattended for approximately 20 seconds, slide show
starts automatically.
• When “Screen Saver” is set to “On” 63 , a thumbnail view which is unattended for about 10 minutes automatically changes
to slide show.
• Some files may not display their own entire images depending on the size.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Viewing JPEG Files (continued)
/ /
/
ENTER
ANGLE
Starting from a thumbnail view
To reverse the order
To display a folder list
Some cameras may have given the first file number
(e.g. 01) always to the latest photo. When you play
such files, reverse the order of images. You can view
them in order of time.
1 Press repeatedly to select the header.
ENTER
A
Z
Z
A
Press
/
/
/
to select “
” then press
ENTER.
2 Press ENTER.
A folder list appears.
ENTER
ENTER
Note
The order of images will be restored when you open the
disc tray or turn the power off.
You can select a folder to play. For details, see page
54
.
To set an image rotation on a thumbnail view
1 Select an image by pressing
/
/
/
.
ENTER
2 Press ANGLE repeatedly.
ANGLE
Each time you press the ANGLE
button, you can set a rotation of the
image in 90° increment. An icon
indicates the current setting. The
image will be rotated after you exit
the thumbnail bearing the icon.
Note
Quitting the JPEG playback restores a rotated image to its
original posture.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
3
MENU
1
2
T
Viewing a single image
To change the image
To view the succeeding image, press or ENTER.
On a thumbnail view, select an image
by pressing
/
/
/
.
1
ENTER
or
ENTER
ENTER
To view the previous image, press
.
Press ENTER.
2
3
ENTER
The selected image is
displayed.
ENTER
Notes
• Change of images will be reversed if you reverse the order
of images.
• You can view the succeeding image also by pressing the
To quit the JPEG playback, press
STOP.
PAUSE/STEP or SKIP
button.
STOP
• If you press the PLAY button after
pressing the STOP button, slide
53
show
starts.
• Pressing the OPEN/CLOSE button
to open the disc tray can also quit
the playback.
To reverse the order
1 Press MENU.
The following menu appears for
MENU
about 5 seconds.
e.g.
Notes
• Some files may not display their own entire image
depending on the size.
• When “Screen Saver” is set to “On” 63 , a single image
which is unattended for about 10 minutes automatically
changes to slide show.
2 Press
/
to select “Reverse” then press ENTER.
To confirm a photo number
Press T.
SEARCH
T
ENTER
Notes
• To turn it off, press the T button.
Note
• You can locate an image by entering its number. While
displaying a photo number, press the number buttons to
enter a number then press the ENTER button. Slide show
will start from the located image.
Whenever you change the order, the first or last of images
to be played will be located.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Viewing JPEG Files (continued)
MENU
/
ENTER
ANGLE
ZOOM
Viewing a single image
To magnify an image
To display a folder list
Press ZOOM repeatedly.
1 Press MENU.
The following menu appears for
about 5 seconds.
ZOOM
MENU
e.g.
Each time you press the ZOOM button, the
magnification level changes as follows:
“Zoom Off” (The icon and monitor scope appear.)
“Zoom1”
“Shrink”
“Zoom2”
“Zoom3” (Maximum)
Original size (The icon and monitor
scope disappear.)
2 Press
/
to select “List” then press ENTER.
Notes
• To turn off the icon and monitor scope, press the
buttons to select “EXIT” in the icon, then
A folder list appears.
/
/
/
ENTER
press the ENTER button.
• While changing the magnification level, you can shift the
image. Press and hold the
/
/
/
buttons.
• Exiting an image cancels the current selection of the
magnification level.
You can select a folder to play. For details, see
page 54
.
To rotate an image
Press ANGLE repeatedly.
To return to the thumbnail view
1 Press MENU.
ANGLE
MENU
The image rotates by clockwise
90°.
Notes
2 Press
ENTER.
/
to select “Thumbnail” then press
• If you rotate an image of which magnification level is
changed, the size of the image is restored momentarily.
• Quitting the JPEG playback restores a rotated image to its
original posture.
• The DVD video player may redo displaying an image if
you rotate it.
ENTER
52
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
PAUSE/STEP
Playing slide show
To confirm a photo number
51
On a thumbnail view, select an image
from which you want to start slide
See
.
1
show.
To magnify an image
See 52
You can skip this step. Slide show will start from a
photograph currently selected.
.
Note
Slide show pauses if you press the ZOOM button.
Press PLAY.
2
3
PLAY
To rotate an image
Slide show starts.
52
See
.
To display a folder list
52
See
.
To quit the JPEG playback, press
STOP.
To return to the thumbnail view
52
See
.
STOP
• If you press the PLAY button after
pressing the STOP button, the
slide show resumes.
• Pressing the OPEN/CLOSE button
to open the disc tray can also quit
the playback.
To view a single image (To pause slide show)
Press PAUSE/STEP.
PAUSE/STEP
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Viewing JPEG Files (continued)
2, 3, 5
1
4
Selecting a folder
You can designate a folder to play.
On a single image view or during slide
Press
/
to select a folder.
show, press MENU.
1
4
: If you press this button while
selecting a sub folder, you can
view the contents of the folder.
• Sub folders will appear if
contained in the selected
folder.
e.g.
MENU
ENTER
• If the selected folder contains a
file to view, a thumbnail image
of the file will appear in the
background.
: If you press this button while
selecting a current folder, you
can go back to the previous
folder.
To display a folder list also from a thumbnail view,
follow the procedure on 50 , and skip to step 3.
Press
/
to select “List” then press
A folder list appears.
Path
ENTER.
2
After thumbnails appear in the
background, press ENTER.
5
ENTER
Current folder
The thumbnail view of the current
e.g.
folder appears.
ENTER
For operations of thumbnail view,
see
.
49
Notes
• The first thumbnail view provided by the automatic mode
may not return once you display a folder list. You can retrieve
it if you load the disc again.
• Letters of a folder/path name overflowing the given space
are not displayed.
Sub folders
Press
/
to select a folder.
3
ENTER
54
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG files compatibility
Discs whose compatibility with this DVD video player has been confirmed by TOSHIBA are as follows.
Many of these discs, when loaded, will make the DVD video player enter the automatic mode
folder in the disc. To play other folders, display a folder list and select a folder.
to play a prescribed
48
CANON QuickCD
FUJICOLOR CD
Kodak Picture CD
NORITSU QSS CD
JPEG disc compatibility with this DVD video player is limited as follows:
• Playable discs:
CD-ROM, CD-R (650MB / 74 min. only)
CD-RW is not recommendable.
Mode 1, Mode 2 XA Form 1
• CD physical format:
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and numerals only, and must incorporate “JPG”
extension.
e.g.“********.JPG”
Less than 256
Less than 1000
• Total number of folders:
• Total number of files:
Some files may not display their own entire image depending on the size.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Setup
You can change the default settings to customize
performance to your preference.
Customizing the Function
Settings
Table of Languages
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings
2
You can change the default settings to customize performance to your preference.
RETURN
3, 4
1, 6
DVD
VCD
CD
Setting procedure
Press
/
to select the setting you
Press SETUP during stop.
want to change, then press ENTER.
1
2
3
4
SETUP
The following on-screen display
appears.
ENTER
ENTER
Picture
TV Shape
PAL/Auto
4:3 LB
Auto
Video Out Select
Pause/Still
Video
Auto
Change the selection by
buttons, by referring to the
corresponding pages (
press ENTER.
/
or other
60
– ), then
Press
/
to select a symbol for the
setting you want to change.
(See the next page.)
ENTER
ENTER
ENTER
Repeat steps 3 and 4 to change other
settings.
To select another operation, go back to step 2.
5
6
Picture performance settings
Press SETUP.
Output sound settings
Language settings
Display settings
SETUP
The on-screen display disappears.
To return to the previous display
Press RETURN.
RETURN
Operational settings
Initial settings
Notes
• The on-screen display disappears when you press the
SETUP button.
• The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear. In this case, try again after
playback is stopped.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Details
Page
60
DVD
TV Shape
To select a picture size according to the aspect
ratio of your TV.
DVD
VCD
PAL/Auto
To select the video system of a disc.
60
DVD
VCD
Video Out Select
Pause/Still
To select the video output type corresponding
to your TV system
60
DVD
To select the resolution of still pictures.
(Field/Frame)
60
DVD
VCD
CD
Audio Out Select
To select an output sound format
61
61
corresponding to your system connection.
DVD
Dynamic Range Control
To turn on or off a function that makes faint
sounds easier to hear even if you lower the
volume during late hours playback.
DVD
Karaoke Vocal
To turn on or off the vocal output during DVD
KARAOKE disc playback.
61
DVD
VCD
CD
On-Screen Language
Disc Menu Language
Audio Language
To select a preferred language for on-screen
displays.
62
62
62
62
DVD
DVD
DVD
To select a preferred language for disc menus.
To select a preferred language for the sound
track.
Subtitle Language
To select a preferred language for subtitles.
DVD
VCD
CD
On-Screen Displays
Background
To turn on or de-activate the operational status
display on the TV screen.
63
63
63
DVD
VCD
CD
To select the background colour or background
picture.
DVD
Screen Saver
To turn the screen saver on or off.
DVD
DVD
Parental Lock
Title Stop
To turn the parental lock function on or off.
64
65
65
65
To turn on or off a feature that automatically
stops playback after a title has been viewed.
VCD
PBC
To use the menu screen when playing a PBC-
controllable VIDEO CD.
Priority Contents
To select the playback priority between JPEG
(picture)
(audio)
files.
files and MP3/WMA
DVD
VCD
CD
On-Screen Language
TV Shape
Audio Out Select
To install the initial system setting.
66
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
DVD VCD
Video Out Select
Picture
18
Video: Select when connected to a normal TV.
TV Shape
PAL/Auto
4:3 LB
Auto
Video Out Select
Pause/Still
Video
Auto
S Video: Select when connected to a TV compatible
18 19
with S video signals.
RGB:
Select when connected to an RGB monitor.
18
DVD
TV Shape
Notes
• When you connect a TV equipped with the component
18
• If the on-screen display disappears immediately after
you select “RGB”, you can restore it by connecting the
DVD player using the VIDEO OUT (yellow) jack.
4:3 Letterbox:
Select when a standard 4:3 TV is
connected.
Displays theatrical images with
masking bars above and below the
picture.
video inputs, select “Video” or “S Video”.
DVD
Pause/Still
4:3 Normal:
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill
your TV screen. Either or both
sides of the picture are cut off.
Auto:
For normal use. Still and fast motion images
can be paused.
Frame: The resolution of still pictures is improved,
so that you can make a motionless picture
more clearer when you pause it.
16:9 Widescreen: Select when a 16:9 wide TV is
connected.
Notes
• The displayable picture size is preset on the DVD video
disc. Therefore, the playback picture of some DVD
video discs may not conform to the picture size you
select.
• When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears
in the 4:3 picture size regardless of the TV shape
setting.
• If you select “16:9 Widescreen” and you own a 4:3 TV
set, the DVD playback picture will be horizontally
distorted during playback. Images will appear to be
horizontally compressed. Always be sure that your TV
shape conforms to the actual TV in use.
DVD VCD
PAL/Auto
PAL: To play a PAL disc. Connect a PAL TV to view a
picture.
Auto: The DVD video player automatically identifies
PAL or NTSC video system of a disc. Connect
a multisystem TV (PAL/NTSC compatible) to
view a picture.
A playback picture may be distorted when
detected a signal change between PAL and
NTSC on the disc.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Karaoke Vocal
Audio
Audio Out Select
Dynamic Range Control On
Karaoke Vocal
Off
Off: The primary vocal is not output.
On: The primary vocal is output when it is recorded
on the disc.
Bitstream
Notes
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background
accompaniment.
DVD VCD
CD
Audio Out Select
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD video
player.
Select the output sound format corresponding to your
system connection.
43
For details of sound recording systems, see
.
Bitstream:
Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
21 22
MPEG1 or MPEG2 decoder.
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 2ch: Select when connected to a TV, or
Dolby Surround Pro Logic or stereo
system via the analog audio jacks.
18 19 21
PCM:
Select when connected to a 2 channel
digital stereo amplifier. 23
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
DVD
Dynamic Range Control
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD video disc.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
DVD
Audio Language
Language
On-Screen Language ENG
Disc Menu Language ENG
English: To play sound tracks in English.
French: To play sound tracks in French.
German: To play sound tracks in German.
Spanish: To play sound tracks in Spanish.
Italian: To play sound tracks in Italian.
Others: To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
Audio Language
Subtitle Language
ENG
– – –
DVD VCD
CD
On-Screen Language
1) Obtain the abbreviation of the preferred
language from the list 67
2) Select the first character by pressing the
buttons.
.
English: To view on-screen displays in English.
Français: To view on-screen displays in French.
Deutsch: To view on-screen displays in German.
Español: To view on-screen displays in Spanish.
Italiano: To view on-screen displays in Italian.
/
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
DVD
Disc Menu Language
Language
On-Screen Language ENG
Disc Menu Language ENG
English
French
German
Spanish
Italian
English: To display disc menus in English.
French: To display disc menus in French.
German: To display disc menus in German.
Spanish: To display disc menus in Spanish.
Italian: To display disc menus in Italian.
Others: To make a further choice.
Audio Language
Subtitle Language
E S
– – –
Others
Code
S
E
After pressing the ENTER button, follow
steps 1) - 4) below.
1) Obtain the abbreviation of the preferred
4) Press the ENTER button.
language from the list 67
2) Select the first character by pressing the
buttons.
.
Note
Some DVD video discs may be played in a different
language than you selected. A prior language may be
programmed on the disc.
/
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
DVD
Subtitle Language
Language
On-Screen Language ENG
Disc Menu Language E S
English
French
German
Spanish
Italian
English:
French:
German:
Spanish:
Italian:
To display subtitles in English.
To display subtitles in French.
To display subtitles in German.
To display subtitles in Spanish.
To display subtitles in Italian.
Audio Language
Subtitle Language
ENG
– – –
Others
Code
S
E
No Subtitle: To disable subtitles.
Others:
To make a further choice.
After pressing the ENTER button,
follow steps 1) - 4) below.
4) Press the ENTER button.
Note
1) Obtain the abbreviation of the preferred
67
Some DVD video discs may not include your pre-
selected language. In this case, the DVD video player
automatically displays disc menus consistent with the
disc’s initial language setting.
language from the list
.
2) Select the first character by pressing the
buttons.
/
62
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
Display
On-Screen Displays On
Background
Screen Saver
Gray
On
Language
On-Screen Language ENG
Disc Menu Language ENG
English
French
Audio Language
Subtitle Language
ENG
A A
German
Spanish
Italian
No Subtitle
Others
Code
DVD VCD
CD
On-Screen Displays
A
A
Off: Operational modes (e.g. “ ”, “
displayed.
On: Operational modes (e.g. “ ”, “
displayed on-screen.
”) are not
”) are
4) Press the ENTER button.
Notes
• Some DVD video discs may be set to display subtitles
in a different language than you selected. A prior
subtitle language may be programmed on the disc.
• Some DVD video discs allow you to change subtitle
selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate
subtitle language from the selection on the disc menu.
DVD VCD
CD
Background
Blue:
Gray:
Blue background.
Gray background.
Picture: To use the picture which appears when you
turn on the DVD video player as a
background.
Jacket: To use the jacket picture included on some
discs as a background. If it is not included,
a gray background will be substituted.
DVD
Screen Saver
Off: The screen saver is disengaged.
On: The screen saver operates.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
1) Press the number buttons to create a personal
4-digit security code, then press the ENTER
button.
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
Operation
Parental Lock
Title Stop
Off
Off
On
Photo
PBC
Priority Contents
2) Enter the code of a country/area whose
standards were used to rate the DVD video
disc, referring to the list below.
DVD
Parental Lock
Country/Area
AUSTRALIA
BELGIUM
CANADA
CHINA
CHINA HONG KONG
DENMARK
FINLAND
Code
AU
BE
CA
CN
HK
DK
FI
DVD video discs equipped with the parental lock
function are rated according to their content. The
contents allowed by a parental lock level and the way
a DVD video disc can be controlled may vary from
disc to disc. For example, if the disc allowed you
could edit out violent scenes unsuitable for children
and replace them with more suitable scenes, or lock
out playback of the disc altogether.
FRANCE
FR
DE
ID
GERMANY
INDONESIA
ITALY
• DVD video discs may or may not respond to the
parental lock settings. This is not a defect in the DVD
video player. Make sure this function works with your
DVD video discs.
IT
JAPAN
MALAYSIA
JP
MY
NL
NO
PH
RU
SG
ES
SE
CH
TW
TH
GB
US
NETHERLANDS
NORWAY
PHILIPPINES
RUSSIAN FEDERATION
SINGAPORE
SPAIN
SWEDEN
SWITZERLAND
TAIWAN
Off: The parental lock feature does not function.
After pressing the ENTER button, follow step 1)
below.
On: To activate the parental lock feature or change
the settings.
After pressing the ENTER button, follow steps
1) - 3) below.
THAILAND
UNITED KINGDOM
UNITED STATES
Operation
Parental Lock
Title Stop
PBC
Off
Off
On
Photo
Off
On
a) Select the first character by pressing the
buttons.
b) Press the
Security Code
– – – –
/
Priority Contents
/
buttons to shift and select
the second character by pressing the
buttons.
/
c) Press the ENTER button.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press the
/
buttons to select the parental
DVD
Title Stop
lock level, then press the ENTER button.
Off: The DVD video player continues after playback
of a title is completed.
On: The DVD video player stops after playback of a
title is completed.
Operation
Parental Lock
Title Stop
Off
Off
Off
On
PBC
On
Photo
Area Code
Level
S
U
7
Priority Contents
VCD
PBC
Off: When playing a VIDEO CD without using the
menu.
On: To use the menu when playing a PBC-featured
VIDEO CD.
You cannot play DVD video discs rated higher than
the level you selected unless you cancel the parental
lock function.
For example, when you select level 7, discs rated
higher than level 7 are locked out and cannot be
played.
Priority Contents
To select the playback priority between JPEG (picture)
files and MP3/WMA (audio) files.
The parental lock level is equivalent to the following
Photo: JPEG files take priority over MP3/WMA
USA movie ratings.
Level 7: NC-17
Level 6: R
Level 4: PG 13
Level 3: PG
files.
Audio: MP3/WMA files take priority over JPEG
files.
Note
Level 1: G
If this selection does not correspond to disc contents, the
DVD video player will take a longer time to start playback
of the disc.
The parental lock levels for other countries/areas
than U.S. are included for future use. Check the
appropriate parental lock level when you buy a DVD
video disc equipped with the parental lock feature in
the future.
To change the parental lock level
Follow steps 1) - 3).
To change your 4-digit security code
1) After selecting “On” or “Off,” press the STOP
button four times, then press the ENTER
button.
STOP
STOP
STOP
STOP
ENTER
The 4-digit security code is cleared.
2) Press the number buttons to create a new
4-digit security code.
3) Press the ENTER button.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
Initial Setup
On-Screen Language ENG
TV Shape
4:3 LB
Audio Out Select
Bitstream
DVD VCD
CD
Initial Setup
1) Press the
/
buttons to select “On-Screen
Language,” and press the ENTER button.
ENTER
ENTER
2) Select a language pressing the
/
buttons,
and press the ENTER button.
See page 62 , “On-Screen Language.”
ENTER
ENTER
3) Make your selection in the same manner as
step 1) then step 2).
See page 60 , “TV Shape.”
See page 61 , “Audio Out Select.”
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Languages
Table of languages and their abbreviations
Abbreviation
Language
Abbreviation
Language
Abbreviation
Language
– – –
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
Sango
Malay
Spanish
Afar
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
IW
JI
SK
SL
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Yiddish
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Irish
Scottish Gaelic
Galician
Xhosa
Yoruba
Zulu
GL
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Before Calling Service
Personnel
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
No power.
• The power plug is disconnected.
• Connect the power plug securely into the 18, 19
wall outlet.
The DVD video player turned • The automatic power off function turned
• Press the PLAY button.
27
26
off by itself.
the unit off.
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
• The video cable is not connected securely. • Connect the video cable securely into the 18, 19
appropriate jacks.
No sound.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
26
• The audio cable is not connected securely. • Connect the audio cable securely into the 18 – 23
appropriate jacks.
• The audio receiver or TV is turned off.
• Turn on the equipment connected with
the audio cable.
26
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
43, 58
61
The playback picture has
occasional distortion.
• The disc is dirty.
• Eject the disc and clean it.
9
–
• It is in fast forward or fast reverse
playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Brightness is unstable or
noises are present in the
playback pictures.
• The effect of copy protection.
• Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VTR or TV/VTR combination.
18
The DVD video player does
not start playback.
• No disc is inserted.
• Insert a disc.
26
10
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and colour system.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
26
26
• The disc is not placed within the guide.
• Place the disc correctly inside the guide
on the disc tray.
• The disc is dirty.
• Clean the disc.
9
• The parental lock function is set.
• Cancel the parental lock function or
change the parental lock level.
58, 64
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback,
memory playback, etc.
• These operations may prevent a proper
progress of the contents.
–
–
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• Press and hold the ON/STANDBY button
on the front panel for more than about 3
seconds. The DVD video player turns off.
Press the button again to turn it on. If the
buttons still do not work, disconnect the
power plug and insert it into the wall
outlet again.
The remote control does not
work properly.
• The remote control is not pointed at the
remote sensor of the DVD video player.
• Point the remote control at the remote
sensor of the DVD video player.
15
15
15
• The remote control is too far from the DVD • Operate the remote control within about
video player.
7 m.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DVD video player / outputs / supplied accessories
DVD Video Player
Power supply
Power consumption
Mass
100-240 V AC, 50/60 Hz
15 W
2.2 kg
External dimensions
Signal system
Laser
430 × 60 × 216 mm (W/H/D)
PAL/3.58 NTSC
Semiconductor laser, wavelength 650/780 nm
Frequency range
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Signal-to-noise ratio
Audio dynamic range
Harmonic distortion
Wow and flutter
More than 112 dB
More than 102 dB
Less than 0.002 %
Below measurable level (less than 0.001 % (W.PEAK))
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Operating conditions
Outputs
Video output (SCART)
Video output (phono type)
S video output
1.0 V (p-p), 75 Ω, SCART socket × 1
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.3 V (p-p), 75 Ω
Component video output
Audio output (SCART)
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack × 2
2.0V (rms), 680 Ω, SCART socket × 1
Audio output (BITSTREAM/PCM
OPTICAL)
Optical connector × 1
Audio output (BITSTREAM/PCM
COAXIAL)
0.5V (p-p), 75 Ω, pin jack × 1
Audio output (ANALOG AUDIO OUT)
2.0 V (rms), 680 Ω, pin jacks (L, R) × 1
Supplied Accessories
Remote control (SE-R0049) ................................. 1
Batteries (R6) ....................................................... 2
Power cord ............................................................ 1
• Designs and specifications are subject to change without notice.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|