DIGITAL VIDEO
DVD VIDEO PLAYER
SD-100X
Sep., 2000 s
Download from Www.Somanuals.com. All Manuals Search And Download.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video
player.
Model No.
Serial No.
Retain this information for future reference.
Location of the required label
PRODUCT IS CERTIFIED BY THE MANUFACTURER TO
COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J
APPLICABLE AT THE DATE OF MANUFACTURE.
MANUFACTURED
T O S H IB A C O R P O R A T IO N
1-1,SHIBAURA 1-CHOME,MINATO-KU.
TOKYO 105-8001,JAPAN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read owner’s manual
After unpacking this product, read the owner’s manual carefully, and follow
all the operating and other instructions.
2. Power Sources
This product should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended
to operate from battery power, or other sources, refer to the operating
instructions.
3. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer’s instructions
have been adhered to.
4. Heat
The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce
heat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Water and Moisture
Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and
the like.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where they exit
from the product.
8. Overloading
Do not overload wall outlets; extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
9. Lightning
For added protection for this product during storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet. This will
prevent damage to the product due to lightning and power-line surges.
10.Object and Liquid Entry
Never insert objects of any kind into this product through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
11.Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
12.Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care. Quick stops,
S3125A
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
13.Disc Tray
Keep your fingers well clear of the disc tray as it is closing. Neglecting to do
so may cause serious personal injury.
14.Burden
Do not place a heavy object on or step on the product. The object may fall,
causing serious personal injury and serious damage to the product.
15.Headphones
When you use headphones, keep the volume at a moderate level. If you use
the headphones continuously with high volume sound, it may cause hearing
damage.
16.Disc
Do not use a cracked, deformed, or repaired disc. These discs are easily
broken and may cause serious personal injury and product malfunction.
17.Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance - this indicates a need for service.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
18.Servicing
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19.Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
20.Safety Check
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper
operating condition.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
Notes on handling
Notes on moisture condensation
When shipping the DVD video player, the original
shipping carton and packing materials come in handy.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD video player. Do not leave rubber or plastic
products in contact with the DVD video player for a
long time. They will leave marks on the finish.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
o
f
n
s
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long
period, the unit may not function properly in the
future. Turn on and use the DVD video player
occasionally.
Optical pick-up
lens
Moisture condensation occurs during the
following cases.
When you bring the DVD video player directly from a
cold place to a warm place.
Notes on locating
When you use the DVD video player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD video player in a
hot and humid place just after you move the unit from
an air conditioned room.
Place the DVD video player on a level surface. Do not
use it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded disc may
come off the proper position and cause damage to
the DVD video player.
When you place this DVD video player near a TV,
radio, or VCR, the playback picture may become poor
and the sound may be distorted. In this case, place
the DVD video player away from the TV, radio, or
VCR.
When you use the DVD video player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use the DVD video player when moisture
condensation may occur.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
video player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
If you use the DVD video player in such a situation, it
may damage discs and internal parts. Remove the
disc, connect the power cord of the DVD video player
to the wall outlet, turn on the DVD video player, and
leave it for two or three hours. After two or three
hours, the DVD video player will have warmed up and
evaporated any moisture. Keep the DVD video player
connected to the wall outlet and moisture
To obtain a clear picture
condensation will seldom occur.
The DVD video player is a high technology, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn down, the picture quality becomes
poor. To obtain a clear picture, we recommend regular
inspection and maintenance (cleaning or parts
replacement) every 1,000 hours of use depending on
the operating environment. For details, contact your
nearest dealer.
Wall outlet
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and the
titles are sub-divided into chapters. VIDEO CDs and audio
CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Playback side
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which is
called “title number”, “chapter number” or “track number”
respectively.
There may be discs that do not have these numbers.
Notes on copyright
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, and rent copyrighted material
without permission.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by
On storing discs
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes on Discs (continued)
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions of
this DVD video player. Some DVD video discs are
produced in a manner that allows specific or limited
operation during playback. As such, the DVD video
player may not respond to all operating commands. This
is not a defect in the DVD video player. Refer to
instruction notes of discs.
This DVD video player can play the following discs.
Maximum
playback time
Disc
Size
Disc Mark
Contents
Approx. 4 hours
(single sided disc)
12 cm
8 cm
Audio
+
video
(moving
pictures)
Approx. 8 hours
(double sided disc)
DVD
video
discs
“
” may appear on the TV screen during operation.
A “ ” means that the operation is not permitted by the
DVD video player or the disc.
Approx. 80 minutes
(single sided disc)
Approx. 160 minutes
(double sided disc)
Notes on region numbers
The region number of this DVD video player is 4. If
region numbers, which stand for their playable area, are
Approx. 74 minutes
Audio
+
video
(moving
pictures)
12 cm
8 cm
4
printed on your DVD video disc and you do not find
VIDEO
CDs
ALL
or
, disc playback will not be allowed by the player.
DIGITAL VIDEO
(In this case, the DVD video player will display a
message on-screen.)
Approx. 20 minutes
Approx. 74 minutes
12 cm
On VIDEO CDs
Audio
CDs
Audio
8 cm
(CD
single)
This DVD video player supports VIDEO CDs equipped
with the PBC (Version 2.0) function. (PBC is the
abbreviation of Playback Control.) You can enjoy two
playback variations depending on types of discs.
Approx. 20 minutes
• You cannot play discs other than those listed above.
• You cannot play discs of CD-R, CD-RW, DVD-RAM,
DVD-RW, etc., even if they may be labeled marks
listed above.
• This DVD video player uses the NTSC color system,
and cannot play DVD video discs recorded in any
other color system (PAL, SECAM, etc.).
• VIDEO CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD video
player in the same way as an audio CD.
• VIDEO CD equipped with PBC function
(Version 2.0)
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
Advanced playback
SAFETY PRECAUTIONS ..........................2
IMPORTANT SAFETY INSTRUCTIONS ...4
Precautions ...............................................8
Accessing a Specific Location
Directly ....................................................26
Entering the time of the desired location ........ 26
Playing Repeatedly.................................27
Repeating a title, chapter, or track .................. 27
Repeating a specific segment ........................ 27
Notes on Discs..........................................9
Notes on region numbers ............................... 10
Table of Contents ................................... 11
Playing in a Favorite Order ....................28
Identification of Controls .......................12
Front panel ..................................................... 12
Rear panel ...................................................... 12
DVD display .................................................... 13
Remote control ............................................... 14
Loading batteries ............................................ 15
Operating with the remote control .................. 15
Setting titles, chapters, or tracks in a favorite
order ............................................................. 28
Playing in Random Order ......................29
Playing titles, chapters or tracks in random
order ............................................................. 29
Zooming a Picture ..................................30
Zooming a picture........................................... 30
Selecting 3-D (N-2-2) Sound
Enhancement ..........................................30
Selecting 3-D (N-2-2) sound enhancement .... 30
Connections
Connecting to a TV .................................16
Connecting to a TV ......................................... 16
Selecting the Camera Angle ..................31
Changing the camera angle ........................... 31
Connecting to an audio system and TV
equipped with ColorStream®
(Component video) inputs ............................ 17
Selecting Subtitles .................................32
Selecting a subtitle language ......................... 32
Connecting to Optional Equipment ......18
Connecting to an amplifier equipped with a
Dolby Digital decoder ................................... 18
Connecting to an amplifier equipped with
Dolby Pro Logic Surround ............................ 18
Connecting to an amplifier equipped with a
DTS decoder ................................................ 18
Connecting to an amplifier equipped with an
MPEG2 audio decoder ................................. 19
Selecting a Language.............................33
Selecting a playback audio setting ................. 33
Viewing the Operational Information
and DVD/CD-Text ....................................34
Checking the operational status ..................... 34
Checking the remaining time and setting
status............................................................ 34
Connecting to an amplifier equipped with a
digital audio input ......................................... 19
Function setup
Customizing the Function Settings ......35
Setting procedure ........................................... 35
Setting details ................................................. 37
Basic playback
Playing a Disc .........................................20
Basic playback................................................ 20
Playing in fast reverse or fast forward
Others
directions ...................................................... 22
Table of Languages ................................42
Before Calling Service Personnel .........43
Specifications .........................................44
Playing frame by frame................................... 22
Playing in slow-motion .................................... 23
Resuming playback from the same location ... 23
Locating a Specific Title, Chapter, or
Track ........................................................24
Locating a title using the top menu................. 24
Locating a title by entering the title number.... 24
Locating a specific chapter or track directly.... 25
Locating a specific chapter or track ................ 25
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls
See the page in
for details.
Front panel
PAUSE button
21
STOP button
21
ON/STANDBY indicator
Disc tray
20
20
PLAY button
20
PLAY
PAUSE
STOP
ON/STANDBY
OPEN/CLOSE
SKIP
ON/STANDBY button
DVD display
SKIP buttons
25
20
13
OPEN/CLOSE button
20
Rear panel
16
VIDEO OUT jack
AC inlet
ColorStream® (Component video)
VIDEO OUT jacks (Y/PB/PR)
17
AC IN
VIDEO OUT
Y PB
VIDEO
PR
AUDIO OUT
R
L
BITSTREAM/
PCM
S
ANALOG
BITSTREAM/PCM AUDIO OUT jack 18 19
ANALOG AUDIO OUT jacks 16 17
Power cord
S VIDEO OUT jack
16
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing of the FL DIMMER button on the remote
control changes the brightness of the display.
DVD display
FL DIMMER
Dimmed
Normal
Off
Total playing time/remaining time/elapsed time indicators
Play mode indicator
Memory playback indicator
Title/track number indicator
Chapter number indicator
TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
HDCD
SVCDVD
Multifunctional indicator (indicates operating status or
messages, etc.)
DVD/VIDEO CD/CD indicator
Repeat playback indicator
Angle icon indicator
The indicators vary depending on the kinds of discs you play.
DVD video disc
VIDEO CD
Audio CD
• When closing the disc tray:
• When closing the disc tray:
• When closing the disc tray:
Example
Example
Example
DISC TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
DISC TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
DISC TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
HDCD
HDCD
HDCD
SVCDVD
SVCDVD
SVCDVD
Total number of titles
Total number of
tracks
Total playing
time of the disc
Total number of
tracks
Total playing
time of the disc
• During playback:
• During playback:
• During playback:
Example
Example
Example
DISC TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
DISC TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
DISC TITLE TRK
CHP INDEX
TOTAL
REMAIN
MEMORY
HDCD
SVCDVD
HDCD
SVCDVD
HDCD
SVCDVD
Playing chapter 3 Elapsed time
Playing track 6
Elapsed time of
the current
track
Playing track 6
Elapsed time of
the current
track
of title 2
of the current
title
Some discs may not display chapter
numbers or elapsed time.
Some discs may not display track
numbers or elapsed time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
ON/STANDBY button 20
OPEN/CLOSE button 20
ON/STANDBY
FL DIMMER
OPEN/CLOSE
SETUP button 35
FL DIMMER button 13
SETUP DISPLAY ZOOM
ANGLE SUBTITLE AUDIO
3D
3D button 30
DISPLAY button 34
ZOOM button 30
ANGLE button 31
1
5
2
6
0
3
4
8
SUBTITLE button
32
AUDIO button 33
7
Number buttons 24
T button 24
SEARCH
T
+
9
10
ENTER button 35
TOP MENU
MENU
TOP MENU button 24
MENU button*
ENTER
Direction buttons 35
(
/
/
/
)
CLEAR
REV
RETURN
CLEAR button 25
RETURN button 35
PLAY FWD PAUSE/STEP
REV button 22
PAUSE/STEP button 21 22
SKIP STOP SKIP SLOW
RANDOM MEMORY REPEAT A-B RPT
PLAY button 20
FWD button 22
SLOW button 23
SKIP button 25
SKIP button 25
STOP button 21
RANDOM button 29
A-B RPT button 27
MEMORY button 28
REPEAT button 27
* MENU button
Use the MENU button to display the menu included on
many DVD video discs. To operate a menu, follow the
instructions in “Locating a title using the top menu.”
24
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading batteries
Operating with the remote control
Open the cover.
Point the remote control at the remote
sensor and press the buttons.
1
30°
30°
Within about 7 m (23 feet)
Insert batteries (AA size).
2
3
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct
sunlight or other illumination. If you do so, you may
not be able to operate the DVD video player via the
remote control.
Close the cover.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not open the remote control.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries.
Do not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage from
battery corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 33
.
Connecting to a TV
Signal flow
AC IN
VIDEO OUT
VIDEO
Y
PB
PR
AUDIO OUT
R
L
BITSTREAM/
PCM
S
ANALOG
To S VIDEO
OUT
(yellow) (red)
(white)
To wall outlet
To VIDEO
OUT
To ANALOG AUDIO OUT
Audio/video cable (supplied)
To audio inputs
To video input
(yellow)
(red)
(white)
To S video input
S video cable (not supplied)
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable.
TV or monitor with
audio/video inputs
• Make the following setting.
Explanation of plug adapter (supplied):
The plug is provided with parallel type pins. However, when
using a power outlet of different type, use the plug adapter.
On-screen display
Select:
Page
35
39
“Audio Out Select” “Analog 2ch”
Plug adapter
Plug with
parallel pins
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an audio system and TV equipped with ColorStream® (Component video) inputs
Signal flow
AC IN
VIDEO OUT
Y PB
VIDEO
PR
AUDIO OUT
R
L
BITSTREAM/
PCM
S
ANALOG
(red)
(white)
To PR
VIDEO
OUT
To PB
VIDEO
OUT
To Y
VIDEO
OUT
To wall outlet
To ANALOG AUDIO OUT
To audio inputs of the amplifier
To Y video input
To PB video input
To PR video input
(red)
(white)
Audio system
TV or monitor with
component video inputs
ColorStream® (Component video) outputs/inputs
• Make the following setting.
Some TVs or monitors are equipped with component video inputs. Connecting to
these inputs allows you to enjoy higher quality picture playback.
Actual labels for component video inputs may vary depending on the TV
manufacturer. (ex.Y, R-Y, B-Y or Y, CB, CR)
On-screen display
Select:
Page
35
39
“Audio Out Select” “Analog 2ch”
In some TVs or monitors, the color levels of the playback picture may be reduced
slightly or the tint may change. In such a case, adjust the TV or monitor for
optimum performance.
Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
For connection to your TV, see “Connecting to a TV” 16 17
For details of output sound, see 33
.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
.
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
Dolby Digital is the surround sound technology used in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home.You can enjoy motion
symbol are trademarks of Dolby
picture and live concert DVD video discs with this dynamic realistic sound by connecting the
Laboratories. Confidential unpublished
DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby
Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full
benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
works. ©1992-1997 Dolby Laboratories.
All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
VIDEO OUT
VIDEO
Y
PB
PR
• Make the following setting.
AUDIO OUT
Amplifier equipped
with a Dolby Digital
decoder
R
L
BITSTAM/
PCM
S
ANALOG
On-screen display
“Audio Out Select” “Bitstream”
Recording system
Select:
Page
To BITSTREAM/PCM AUDIO OUT
35
39
75 Ω coaxial cable
D
33
To digital audio input
Connecting to an amplifier equipped with Dolby Pro Logic Surround
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set
• Make the following setting.
On-screen display
Select:
Page
the amplifier so you can enjoy Dolby Pro Logic Surround sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
35
39
“Audio Out Select” “Analog 2ch”
Be sure to set “Audio Out Select”
to “Analog 2ch” when you enjoy
sounds of Dolby Pro Logic
VIDEO OUT
Y PB
VIDEO
PR
AUDIO OUT
Amplifier equipped
with Dolby Pro Logic
Surround
R
L
ITSTREAM/
PCM
S
ANALOG
Surround using this connection.
To ANALOG
AUDIO OUT
*
* Connect one or two rear speakers.
The output sound from the rear speakers will be
monaural even if you connect two rear speakers.
To audio input
Audio cable
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use,
on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS
encoded sound tracks on DVD video discs or audio CDs.
“DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems,
Inc.
• Use DVD video discs or audio
CDs encoded via the DTS
recording system.
VIDEO OUT
• Make the following setting.
VIDEO
Y
PB
PR
AUDIO OUT
On-screen display
“Audio Out Select” “Bitstream”
Recording system DTS
Select:
Page
R
L
BITSTRAM/
PCM
S
ANALOG
Amplifier equipped
with a DTS decoder
35
39
To BITSTREAM/PCM AUDIO OUT
75 Ω coaxial cable
33
To digital audio input
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
• When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital,
Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the on-
screen displays 35 39 . Otherwise, high volume sound may damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog
stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG
AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the
BITSTREAM/PCM AUDIO OUT jack of the DVD video player.
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder
or MPEG2 audio processor.
• Use DVD video discs encoded via
the MPEG2 recording system.
VIDEO OUT
VIDEO
Y
PB
PR
• Make the following setting.
Amplifier equipped
with an MPEG2
audio decoder
AUDIO OUT
R
L
BITSTRAM/
PCM
S
On-screen display
Select:
Page
ANALOG
35
39
To BITSTREAM/PCM AUDIO OUT
75 Ω coaxial cable
“Audio Out Select” “Bitstream”
Recording system
MPEG
33
To digital audio input
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left front
speakers).
VIDEO OUT
VIDEO
Y
PB
PR
• Make the following setting.
AUDIO OUT
Amplifier equipped
with a digital audio
input
R
L
BITSTRAM/
PCM
S
ANALOG
On-screen display
Select:
Page
To BITSTREAM/PCM AUDIO OUT
35
39
“Audio Out Select”
“PCM”
75 Ω coaxial cable
To digital audio input
Notes
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital
Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM
AUDIO OUT jack of the DVD video player.
• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Playing a Disc
This section shows you the basics on how to play a disc.
ON/STANDBY indicator
3
PAUSE STOP
PLAY
PAUSE
STOP
ON/STANDBY
OPEN/CLOSE
SKIP
2
4
1
DVD
VCD
CD
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD video player.
Initial set-up
Make the following settings on the display.
Press ON/STANDBY.
1
The DVD video player turns on and
the ON/STANDBY indicator on the
player illuminates.
On-Screen Language:
Select the appropriate
on-screen language.
TV Shape: Select a
picture size according to
the aspect ratio of your
ON/STANDBY
TO SHIBA
Thank you for your purchase of this TOSHIBA DVD Player.
Please make a selection
for On-Screen Language and your TV Shape and
press ENTER button on your remote control.
When the DVD video player is turned on for
the first time, an initial set-up display appears.
See “Initial set-up” and make the proper
settings before proceeding to step 2.
FIRST SETUP
O n -Scre e n La n g u a g e
TV Sh a p e
EN G
4 :3 LB
38
TV. (See
for details.)
1 Press
/
to select “On-Screen Language,” and
press ENTER.
Press OPEN/CLOSE.
2 Select a language using / , and press ENTER.
3 Press to select “TV Shape,” and press ENTER.
4 Select a picture size using / , and press ENTER.
5 Finally press SETUP.
OPEN/CLOSE
2
3
The disc tray opens.
Place the disc on the disc tray.
All your selections are entered and the display
disappears.
To change your settings, see “Customizing the Function
Settings.” 35
With the playback
side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the
DVD video player to malfunction.
• Do not place anything except DVD video discs,
VIDEO CDs or audio CDs on the disc tray.
Press PLAY.
4
The disc tray closes and playback
starts.
PLAY
If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
24
using the top menu.”
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD video disc.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain a higher quality picture
2
1
SETUP
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD video player, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
TOP MENU
/
/
/
DVD VCD
CD
About
The
ENTER
DVD VCD
CD
icons on the heading bar show the playable discs for the
MENU
PAUSE/STEP
function described under that heading.
DVD
:You can use this function with DVD video discs.
:You can use this function with VIDEO CDs.
:You can use this function with audio CDs.
4
STOP
VCD
CD
To pause playback (still mode)
About the screen saver
Press PAUSE/STEP during playback.
If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the DVD video
player automatically appears (when “Screen Saver” is
set to “On” 40 ). To turn off the screen saver, press the
PLAY button.
PAUSE/STEP
To resume normal playback, press
the PLAY button.
• Sound is muted during still mode.
To stop playback
Automatic Power Off function
Press STOP.
If the DVD video player is stopped, or the screen saver
is engaged for about 20 minutes, the DVD video player
will automatically turn itself off.
STOP
To remove the disc
Press OPEN/CLOSE.
OPEN/CLOSE
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Notes
• Do not move the DVD video player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD video player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video
player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
STOP button on your remote control once the movie is completed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
Playing a Disc (continued)
You can play discs at various speeds, and resume playback from the location
where you stopped playback.
REV
FWD
PAUSE/STEP
PLAY
SLOW
DVD
VCD
CD
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
Press REV or FWD during playback.
PLAY
REV
FWD
REV: Fast reverse playback
FWD: Fast forward playback
DVD
Notes
Each time you press the REV or
FWD button, the playback speed
changes.
• The DVD video player mutes sound and omits subtitles
during reverse and forward scan of DVD video discs.
However, the DVD video player plays sound during fast
forward or fast reverse play of audio CDs.
TV screen
2
8
30
• The playback speed may differ depending on the disc.
x2 the normal
speed
x8 the normal
speed
x30 the normal
speed
VCD
CD
Each time you press the REV or
FWD button, the two speeds
alternate.
TV screen
FR1
FR2
Fast reverse
playback
FF1
FF2
Fast forward
playback
DVD
VCD
Playing frame by frame
To resume normal playback
Press PLAY.
Press PAUSE/STEP during still playback.
Each time you press the PAUSE/
STEP button, the picture advances
one frame.
PAUSE/STEP
PLAY
Note
The sound is muted during frame by frame playback.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
VCD
Playing in slow-motion
To resume normal playback
Press PLAY.
Press SLOW during playback.
SLOW
Each time you press the SLOW
button, the slow-motion speed
changes.
PLAY
TV screen
Notes
1 2
1 4
1 8
• The sound is muted during slow-motion playback.
• The playback speed may differ depending on the disc.
1/2 the normal
speed
1/4 the normal
speed
1/8 the normal
speed
DVD
VCD
CD
Resuming playback from the same location
To start playback from the beginning regardless
of the location where you stopped playback
1 Press STOP twice.
Press STOP at the location where you
want to interrupt playback.
1
2
The DVD video player memorizes
the location where playback is
stopped.
STOP
STOP
The DVD video player’s memory is
cleared.
2 Press PLAY.
Press PLAY.
PLAY
DVD
Playback starts from the
beginning of the current title.
The DVD video player resumes
PLAY
playback from the location where
you stopped playback.
VCD
CD
Playback starts from the
beginning of the disc.
• If you want to return to the beginning of a DVD video
disc, open and close the disc tray once with the
OPEN/CLOSE button before pressing the PLAY
button.
Notes
• The DVD video player’s memory is also cleared when:
–you unplug the DVD video player from the wall outlet after
you stop playback.
–you change the parental lock setting 40 or select a disc
37
menu language
.
–you open the disc tray.
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while the
DVD video player keeps a location in the memory may
function only after the memory is cleared.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
Locating a Specific Title, Chapter, or Track
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs
are divided into tracks.You can quickly locate any specific title, chapter, or track.
DVD video disc
Title 1
Title 2
VIDEO CD/audio CD
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Track 1
Track 2
Track 3
Track 4
Track 5
DVD
Locating a title using the top menu
Press TOP MENU.
Press ENTER.
1
3
The top menu appears on the TV
screen.
Playback starts from chapter 1 of the
selected title.
TOP MENU
ENTER
e.g.
TITLE 1
TITLE 2
Notes
TITLE 3
TITLE 4
• The instructions above describe basic procedures which
may vary depending on the contents of the DVD video disc.
If different instructions appear on the TV screen, follow those
instructions.
• If you display the top menu during playback and press the
TOP MENU button again without selecting any title, the DVD
video player may resume playback from the point where you
first pressed the TOP MENU button (depending on the actual
DVD video disc.)
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that
displays the top menu as TITLE button.
Press
want.
/
/
/
to select the title you
2
If the titles in the top menu are
assigned a number, you can directly
locate a specific title by pressing its
designated number with the number
buttons.
ENTER
DVD
Locating a title by entering the title number
Notes
Press T.
• Pressing the CLEAR button resets the title and chapter
numbers. To clear the “Title” and “Chapter” display, press the
T button several times.
• This method of locating a title is available only on a disc that
contains title numbers.
1 SEARCH
Make sure that the space next to
“Title” is highlighted.
(You can shift the highlight using the
T
/
buttons.)
:
Title
hapter
1
:
C
1
Press the corresponding number
buttons for the title you want.
2
3
e.g. To select title 2
To select title 12
2
1
2
Press PLAY.
PLAY
Playback starts from chapter 1 of the
selected title.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TOP MENU
Number buttons
T
ENTER
/
/
/
CLEAR
PLAY
SKIP
DVD
VCD
CD
Locating a specific chapter or track directly
Press T.
Press PLAY.
1Skip steps 1 and 2 if you are using a VIDEO CD/
4
PLAY
Playback starts from the selected
chapter or track.
audio CD.
SEARCH
:
Title
hapter
1
:
C
1
T
To select a title and chapter number at the same
time
Press to highlight the space next to
“Chapter.”
Perform step 1, and enter a title number you want in the
space next to “Title” using the number buttons, then
perform steps 2 to 4.
2
3
ENTER
:
Title
1
:
Chapter
1
Note
Pressing the CLEAR button resets the title and chapter
numbers. To clear the “Title” and “Chapter” display, press the T
button several times.
Press the corresponding number
buttons for the chapter or track you
want.
You can use the +10 button to select numbers
from 10 through 99.
e.g. To select chapter or track 25
2
5
or
+
+
10
5
10
DVD
VCD
CD
Locating a specific chapter or track
Notes
Press SKIP
the chapter or track number you want.
Playback starts from the selected chapter or track.
or
repeatedly to display
• Some titles may not display chapter numbers.
• If you press and hold the SKIP or button during
playback, the DVD player performs fast reverse or fast
forward playback. You can vary the speed by pressing the
button repeatedly.
SKIP
To locate succeeding chapters or tracks
To locate chapters or tracks during fast reverse or fast
forward playback, first press the PLAY button to resume
SKIP
Playback starts from the beginning of the
current chapter or track.
When you press twice, playback starts
from the beginning of the preceding
chapter or track.
normal playback, then use the SKIP
or
button.
• When you set “Title Stop” to “Off” 41 , you can access
chapters in another title. If you go back to the preceding title
by pressing the SKIP
button, the DVD video player
locates the first chapter of the title. When “Title Stop” is set
to “On,” you can access chapters only within the current title.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Accessing a Specific Location Directly
You can access a specific location by entering its corresponding time (hours,
minutes, seconds).
2
1
3
DVD
VCD
CD
Entering the time of the desired location
Notes
Press T twice.
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you specified.
• This method for accessing specific locations is available
only within the current title of the DVD video disc or within
the current track of the VIDEO CD/audio CD.
1
You may have to press further
SEARCH
depending on the disc. Press the
button repeatedly until the following
display appears.
T
:
Time -:- - - -
Press the number buttons to enter the
time.
2
3
e.g.
1
2
5
3
0
:
:
Time 1 25 30
Press PLAY.
Playback starts from the desired
location.
PLAY
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Repeatedly
You can play a specific title, chapter, track, or segment repeatedly.
(Title repeat, chapter/track repeat, A-B repeat)
CLEAR
PLAY
REPEAT
A-B RPT
DVD
VCD
CD
Repeating a title, chapter, or track
Press REPEAT.
Press PLAY.
REPEAT
PLAY
1
2
Each time you press the REPEAT
button, the repeat mode changes as
follows.
The DVD video player starts repeat
playback.
Press the PLAY button within about
5 seconds after you press the
REPEAT button.
Chapter Repeat
To resume normal playback
Press CLEAR.
DVD
DVD
Chapter Repeat Repeats the current
chapter.
CLEAR
Title Repeat
Track Repeat
Repeats the current
title.
Repeats the current
VCD
CD
track.
Note
VCD
CD
Some discs may not permit repeat operation.
All Repeat
Repeat Off
Repeats the entire
disc.
Resumes normal
playback.
DVD
VCD
CD
Repeating a specific segment
To resume normal playback
Press CLEAR.
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
1
2
CLEAR
A-B RPT
A–
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles 31
• You can specify a segment only within the current title or
track.
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
Press A-B RPT again at the end of the
segment (point B).
.
A-B RPT
The DVD video player automatically
returns to point A and starts repeat
playback of the selected segment
(A-B).
A–B
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Playing in a Favorite Order
DISPLAY
You can combine your favorite titles, chapters, or tracks and play them in the
order you determine.You can program up to 28 selections into the memory.
(Memory playback)
2
2
Title:
2
Title:
2
Title:
1
Chapter: 25
Chapter: 12
Chapter:
1
/
/
/
CLEAR
3
1
DVD
VCD
CD
Setting titles, chapters, or tracks in a favorite order
To change the programmed selections
1 While the MEMORY display appears on the TV
Insert a disc and press MEMORY during
stop.
1
2
screen, press
/
to move the highlighted bar to the
item you want to change.
2 Change the selection following the instructions in
step 2.
The following display appears.
MEMORY
MEMORY
T
C
T
C
T
C
T
C
1
2
3
4
5
6
7
– – – –
– – – –
8
9
– – – – 15 – – – – 22 – – – –
– – – – 16 – – – – 23 – – – –
To cancel the programmed selections
1 While the MEMORY display appears on the TV
– – – – 10 – – – – 17 – – – – 24 – – – –
– – – – 11 – – – – 18 – – – – 25 – – – –
– – – –
– – – – 13 – – – – 20 – – – – 27 – – – –
– – – – 14 – – – – 21 – – – – 28 – – – –
screen, press
/
to move the highlighted bar to the
T: Title number or
track number
C: Chapter number
– – – –
– – – –
12
19
26
– – – –
item you want to cancel.
2 Press CLEAR.
To resume normal playback from memory
playback
Press CLEAR.
Select the items in the order you want
by pressing the number buttons, then
ENTER for each item.
The memory playback indicator
disappears.
CLEAR
Each time you press the
/
button, the space
of “T” and “C” is highlighted in turn. Highlight
where you want to enter, then press the
corresponding number buttons.
To select another chapter in the same title, you do not
need to select the title number.
To program during playback
If you press the MEMORY button during playback, a
programming display appears.
If you further press the DISPLAY button, you can
display the current MEMORY setting. Follow steps 2
and 3.
To select tracks from a VIDEO CD/audio CD in order,
press the number buttons for the track, then press
the ENTER button for each selection you want.
Press PLAY while the MEMORY display
appears on the TV screen.
Notes
3
• Some discs may not permit memory playback operation.
• If you press the REPEAT button during memory playback,
the DVD video player repeats the current memory playback.
• If you press the MEMORY or RETURN button while the
MEMORY display appears on the TV screen, the MEMORY
display disappears.
The DVD video player starts memory
playback.
PLAY
• The programmed selections will be cleared when you turn off
the DVD video player.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in Random Order
You can play titles, chapters within a title, or tracks in random order.
(Random playback)
Title:
1
Chapter:
3
CLEAR
Title:
2
Title:
3
Chapter:
2
Chapter:
1
2
1
DVD
VCD
CD
Playing titles, chapters or tracks in random order
To resume normal playback
Press CLEAR.
Press RANDOM.
RANDOM
1
2
Each time you press the RANDOM
CLEAR
button, the random playback mode
changes as follows.
Chapter Random
Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction
with the memory playback function.
DVD
DVD
Chapter Random Plays chapters within
the current title in
random order.
Title Random
Track Random
Plays titles in random
order.
VCD
CD
Plays tracks in random
order.
Random Off
Resumes normal
playback.
If you press the RANDOM button
during playback, the DVD video
player automatically starts random
playback after finishing the current
title, chapter or track.
Press PLAY.
PLAY
The DVD video player starts random
playback.
Press the PLAY button within about
5 seconds after you press the
RANDOM button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
ZOOM
/
/
/
RETURN
CLEAR
DVD
Zooming a picture
To resume normal playback
Press ZOOM repeatedly so that “Zoom Off” appears.
Press ZOOM during normal, slow or still
playback.
ZOOM
ZOOM
As you repeatedly press the ZOOM
button, the magnification level
increases.
Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as
described.
RETURN
To reduce the magnification level,
press the RETURN button.
• Zooming does not work on subtitles or menus included on
DVD video discs.
If you press the
the zoom point shifts.
When the zoom point reaches an
edge of the picture, the color of
“Zoom” changes.
/
/
/
buttons,
ENTER
• During zoom playback, the
/
/
/
buttons cannot work
on menus included on DVD video discs. If you want to view
the menus, cancel the zoom playback.
• The magnification level varies depending on the picture size
you select. 38
CLEAR
Pressing the CLEAR button restores
the zoom point to the center of the
picture.
Selecting 3-D (N-2-2) Sound Enhancement
You can enjoy expansive virtual surround sound effects from just two speakers.
3D
DVD
VCD
CD
Selecting 3-D (N-2-2) sound enhancement
Notes
Press 3D during playback.
• You may sense a difference in volume between normal and
3-D (N-2-2) enhanced sound.
• 3-D (N-2-2) sound enhancement may not function (or may
not be realized) depending on the sound output setting or
3D
The current setting is displayed.
Each time you press the 3D button,
the setting changes as follows.
33
disc recording system
.
• If 3-D (N-2-2) sound enhancement is on, Dolby Pro Logic
Surround may not function on output sounds at all, or may
function differently than usual.
(
(
):
3
3
D
D
N
N
–
–
2
2
–
–
2
2
O
O
ff
Off
):
n
On
Spatializer™ 3-Dimensional Sound Processing provided by Desper
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer™ and the circle-in-square
device are trademarks owned by Desper Products, Inc.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Camera Angle
If the scene was recorded from multiple angles, you can easily change
the camera angle of the scene you are watching.
1, 2
2
CLEAR
DVD
Changing the camera angle
To turn off the angle number display
Press CLEAR.
Press ANGLE while playing a scene
recorded with multiple angles.
1
2
CLEAR
ANGLE
While playing a scene recorded with
multiple angles, the angle icon (
appears in the DVD display and on
the TV screen.
Press the ANGLE button while the
angle icon is displayed.
)
To disable the angle icon display on the TV
From the on-screen displays, set “On-Screen Displays”
to “Off.” 40
Monitor the DVD display when you want to change the
camera angle.
Current angle number
Angle icon
:
Angle
1
Notes
• You can change the camera angle during still playback. The
camera angle changes to the new setting when you resume
normal playback.
• If you pause a picture immediately after changing a camera
angle, the resumed playback picture may not display the new
camera angle.
Press ANGLE or while the angle
number is displayed on the TV screen.
Each time you press the ANGLE or
button, the camera angle changes.
ANGLE
e.g.
:
:
:
Angle
Angle
Angle
1
2
3
ENTER
: Cycles backwards
You can change the camera angle directly by
pressing the number buttons corresponding to its
angle number instead of using the
/
buttons.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Selecting Subtitles
You can display subtitles on the TV screen and select a subtitle language
from those included on the DVD video disc.
SUBTITLE
/
/
/
CLEAR
Good evening!
Bonsoir!
¡Buenas tardes!
DVD
Selecting a subtitle language
To turn subtitles on or off
1 Press SUBTITLE during playback.
Press SUBTITLE during playback.
1
The current subtitle setting is
displayed for about 3 seconds.
SUBTITLE
SUBTITLE
:
Subtitle
1
ENG
On
2 Press
/
while the subtitle setting is displayed on
Language
Position number
the TV screen, to select “On” or “Off.”
Displayed for about 3 seconds.
ENTER
The abbreviation of the language appears instead
of the language name. Refer to the list of
:
Subtitle
1
ENG
On
42
languages and their abbreviations.
Press SUBTITLE or while the subtitle
setting is displayed on the TV screen.
2
Each time you press the SUBTITLE
or button, the subtitle languages
included on the DVD video disc
change.
SUBTITLE
Good evening!
Subtitles
:
Subtitle
1
ENG
O
ff
e.g.
ENTER
Subtitles are
not displayed.
:
:
:
Subtitle
Subtitle
Subtitle
1
2
3
E
NG
O
O
O
n
n
n
FRE
SPA
Notes
• Some DVD video discs are set to display subtitles
automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear
immediately after you select “On.”
: Cycles backwards
To turn off the subtitle setting display,
press the CLEAR button.
• Some DVD video discs will allow you to make subtitle
selections and turn subtitles on or off only via the disc menu.
Notes
• When you turn on the DVD video player or replace a disc, the player returns to the initial default setting 37
.
When you select a subtitle language which is not included on the disc, the DVD video player plays a prior language
programmed on the disc.
• During some scenes, the subtitles may not appear immediately after you change the subtitle language by pressing the
buttons.
/
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Language
You can select a preferred language and sound recording system from those
included on the DVD video disc.
1, 2
2
Good morning!
¡Buenos días!
Bonjour!
CLEAR
DVD
Selecting a playback audio setting
Press AUDIO during playback.
Press AUDIO or while the audio
setting is displayed on the TV screen.
1
2
AUDIO
The current audio setting is
displayed for about 3 seconds.
Each time you press the AUDIO or
button, the audio settings included
on the DVD video disc change.
AUDIO
Language
Position
number
Recording system
Audio channel
e.g.
:
O
Audio
Audio
1
E
NG
P
CM
2
CH
:
Audio
1
ENG
PCM
2CH
:
ENTER
ut Select Bitstream
:
:
Audio
Audio
2
3
FRE
SPA
D
2
CH
Output sound format
39
PCM
2
C
H
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 42
: Cycles backwards
If you press the
can select output sound format.
/
buttons, you
39
To turn off the audio setting display, press the
CLEAR button.
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting 37
If you select a sound track which is not included on the disc,
the DVD video player plays a prior sound track programmed
on the disc.
Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the
AUDIO button repeatedly during playback.
.
AUDIO
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
Output sound conversion table (sampling frequency/quantization bit)
and output jacks on the rear panel
“Analog 2ch”
“PCM”
Audio selection from the menu 35 39
“Bitstream”
Recording system
Dolby Digital
Discs
BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO
jack
OUT jacks
jack
OUT jacks
jack
OUT jacks
Bitstream
48 kHz/20 bit
Bitstream
48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/20 bit
48 kHz/24 bit 48 kHz/16 bit 48 kHz/20 bit
96 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit
96 kHz/24 bit 48 kHz/16 bit 48 kHz/20 bit
48 kHz/24 bit 48 kHz/16 bit
96 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit
96 kHz/24 bit 48 kHz/16 bit
DVD video
discs
Linear PCM
Bitstream
Bitstream
Bitstream
Bitstream
DTS
MPEG2
MPEG1
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
VIDEO CDs
Audio CDs
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream (Noise) Bitstream (Noise) Bitstream (Noise)
Linear PCM 44.1 kHz/16 bit
DTS
: 3-D (N-2-2) sound enhancement can function.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Viewing the Operational Information and
DVD/CD-Text
DISPLAY
You can view information about a disc and its operational status on the TV
screen.
DVD
VCD
CD
Checking the operational status
Press DISPLAY during stop.
DISPLAY
Each time you press the DISPLAY button, the on-screen display appears as follows.
Current track number
Total playing time of the disc
DVD
VCD
CD
Current title number
Current chapter number
e.g.
→
e.g.
→
Stop
Operational
status
Stop
Operational
status
:
:
:
Track
1
Total
0
46 30
:
:
Title
hapter
2
1
C
↓
↓
Displays CD-Text data if included on the audio CDs.
Displays DVD-Text data if included on the disc.
(Some letters may not be displayed properly
(Some letters or sections may not be displayed
depending on the disc.)
properly depending on the disc.)
↓
↓
Turns off.
Turns off.
DVD
VCD
CD
Checking the remaining time and setting status
Press DISPLAY during playback.
DISPLAY
Each time you press the DISPLAY button, the on-screen display appears as follows.
Current chapter number
Elapsed time
and remaining
time of the
Current title number
Operational status
Current track number
Playback mode
Operational
status
Elapsed time
and remaining
time of the
VCD
CD
DVD
current title
Playback mode
current track
e.g.
→
e.g.
→
Elapsed time
and remaining
time of the
Play
Play
Elapsed Remain
Elapsed time
and remaining
time of the disc
Elapsed Remain
:
:
:
:
:
:
:
:
:
:
:
:
:
:
3
Track
isc
0 01 20 0 02 00
Title
hapter
3
2
0 10 15 0 50 45
:
:
:
:
:
:
:
:
D
0 05 12 0 43 00
Track Repeat
C
0 03 08 0 10 24
current chapter
C
O
hapter Repeat
3
D
(
N
-2-2)
On
3
D
(N
-2-2)
udio
n
Current 3-D
(N-2-2) setting
Current 3-D
(N-2-2) setting
1
E
E
NG
NG Off
D
CH
A
2
Current audio
setting
:
Subtitle 12
:
1
A
ngle
Current subtitle
setting
Current angle
setting
↓
Displays CD-Text data if included on the audio CDs.
↓
(Some letters may not be displayed properly
depending on the disc.)
↓
0
10
Bit Rate
6
.
0
Mbps
Turns off.
Data transfer rate (Mbit/s)
= Amount of picture, sound and subtitle data in the
DVD video disc transferred per second.
The larger the value is, the more data processed, but
this does not necessarily insure better picture quality.
↓
Displays DVD-Text data if included on the disc.
(Some letters or sections may not be displayed
properly depending on the disc.)
↓
Turns off.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
1, 6
2
RETURN
LANGUAGE
PICTURE
DISPLAY
OPERATION
AUDIO
3, 4
DVD
VCD
CD
Setting procedure
Press
/
to select the setting you
Press SETUP during stop.
want to change, then press ENTER.
1
2
3
4
The following on-screen display
appears.
SETUP
ENTER
ENTER
PICTURE
AUDIO
DISPLAY
OPERATION
LANGUAGE
O n -Scre e n La n g u a g e
Disc Me n u La n g u a g e
Au d io La n g u a g e
EN G
EN G
EN G
– – –
Change the selection by
buttons, by referring to the
corresponding pages
ENTER.
/
or other
Su b title La n g u a g e
37
, then press
Press
/
to select a symbol for the
ENTER
ENTER
setting you want to change.
(See the next page.)
ENTER
Repeat steps 3 and 4 to change other
settings.
To select another operation, go back to step 2.
5
6
Language settings
Press SETUP.
LANGUAGE
SETUP
The on-screen display disappears.
Picture performance settings
PICTURE
AUDIO
To return to the previous display
Press RETURN.
RETURN
Output sound settings
Display settings
DISPLAY
Notes
Operational settings
• The on-screen display disappears when you press the
SETUP button.
OPERATION
• The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear. In this case, try again after
playback is stopped.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Setting
Details
Page
DVD
VCD
CD
On-Screen Language
Disc Menu Language
Audio Language
To select a preferred language for on-screen
displays.
37
37
37
37
DVD
DVD
DVD
To select a preferred language for disc menus.
LANGUAGE
To select a preferred language for the sound
track.
Subtitle Language
To select a preferred language for subtitles.
DVD
TV Shape
To select a picture size according to the aspect
ratio of your TV.
38
38
DVD
VCD
Black Level
To select the black level of playback pictures.
PICTURE
AUDIO
DVD
VCD
CD
Audio Out Select
To select an output sound format
corresponding to your system connection.
39
39
DVD
Dynamic Range Control
To turn on or off a function that makes faint
sounds easier to hear even if you lower the
volume during late hours playback.
DVD
Karaoke Vocal
To turn on or off the vocal output during DVD
KARAOKE disc playback.
39
DVD
VCD
CD
On-Screen Displays
OSD Background Color
Screen Saver
To turn on or de-activate the operational status
display on the TV screen.
40
40
40
DVD
VCD
CD
To select the background color for on-screen
displays.
DISPLAY
DVD
To turn the screen saver on or off.
DVD
DVD
Pause/Still
To select the resolution of still pictures.
(Field/Frame)
40
40
41
41
41
Parental Lock
Remote Confirmation
Title Stop
To turn the parental lock function on or off.
OPERATION
DVD
VCD
CD
To turn on or off the confirmation beeper for
each remote command received.
DVD
To turn on or off a feature that automatically
stops playback after a title has been viewed.
VCD
PBC
To use the menu screen when playing a PBC-
controllable VIDEO CD.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings (continued)
Setting details
DVD
Audio Language
PICTURE
AUDIO
DISPLAY
OPERATION
LANGUAGE
English: To play sound tracks in English.
French: To play sound tracks in French.
Spanish: To play sound tracks in Spanish.
Others: To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
O n -Scre e n La n g u a g e
Disc Me n u La n g u a g e
Au d io La n g u a g e
EN G
EN G
EN G
– – –
LANGUAGE
Su b title La n g u a g e
1) Obtain the abbreviation of the preferred
42
language from the list
.
DVD VCD
CD
On-Screen Language
2) Select the first character by pressing the
buttons.
/
English: To view on-screen displays in English.
French: To view on-screen displays in French.
Spanish: To view on-screen displays in Spanish.
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
PICTURE
AUDIO
DISPLAY
OPERATION
DVD
Disc Menu Language
LANGUAGE
O n -Scre e n La n g u a g e
Disc Me n u La n g u a g e
Au d io La n g u a g e
EN G
En g lish
Fre n ch
Sp a n ish
O th e rs
English: To display disc menus in English.
French: To display disc menus in French.
Spanish To display disc menus in Spanish.
Others: To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
EN G
PA
Su b title La n g u a g e
– – –
Co d e
P
A
1) Obtain the abbreviation of the preferred
4) Press the ENTER button.
language from the list 42
.
2) Select the first character by pressing the
buttons.
/
Note
Some DVD video discs may be played in a different
language than you selected. A prior language may be
programmed on the disc.
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
PICTURE
AUDIO
DISPLAY
OPERATION
DVD
Subtitle Language
LANGUAGE
O n -Scre e n La n g u a g e
Disc Me n u La n g u a g e
Au d io La n g u a g e
EN G
En g lish
Fre n ch
Sp a n ish
O th e rs
PA
EN G
– – –
English:
French:
Spanish:
To display subtitles in English.
To display subtitles in French.
To display subtitles in Spanish.
Su b title La n g u a g e
Co d e
P
A
No Subtitle: To disable subtitles.
Others:
To make a further choice.
After pressing the ENTER button,
follow steps 1) - 4) below.
4) Press the ENTER button.
1) Obtain the abbreviation of the preferred
42
Note
language from the list
.
Some DVD video discs may not include your pre-
2) Select the first character by pressing the
buttons.
/
selected language. In this case, the DVD video player
automatically displays disc menus consistent with the
disc’s initial language setting.
(Continued)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
(Continued)
LANGUAGE
AUDIO
DISPLAY
OPERATION
PICTURE
3) Press the
/
buttons to shift and select the
:
TV Sh a p e
4
3 LB
Bla ck Le ve l
N RML
second character by pressing the
buttons.
/
PICTURE
PICTURE
DISPLAY
OPERATION
AUDIO
LANGUAGE
O n -Scre e n La n g u a g e
Disc Me n u La n g u a g e
Au d io La n g u a g e
EN G
En g lish
EN G
EN G
PA
Fre n ch
Sp a n ish
N o Su b title
O th e rs
Su b title La n g u a g e
DVD
TV Shape
Co d e
P
A
4:3 Letterbox:
Select when a standard 4:3 TV is
connected.
Displays theatrical images with
masking bars above and below the
picture.
4) Press the ENTER button.
Notes
• Some DVD video discs may be set to display subtitles
in a different language than you selected. A prior
subtitle language may be programmed on the disc.
• Some DVD video discs allow you to change subtitle
selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate
subtitle language from the selection on the disc menu.
4:3 Normal:
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill
your TV screen. Either or both
sides of the picture are cut off.
16:9 Widescreen: Select when a 16:9 wide TV is
connected.
Notes
• The displayable picture size is preset on the DVD video
disc. Therefore, the playback picture of some DVD
video discs may not conform to the picture size you
select.
• When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears
in the 4:3 picture size regardless of the TV shape
setting.
• If you select “16:9 Widescreen” and you own a 4:3 TV
set, the DVD playback picture will be horizontally
distorted during playback. Images will appear to be
horizontally compressed. Always be sure that your TV
shape conforms to the actual TV in use.
DVD VCD
Black Level
Set to your preference and monitor’s ability.
Enhanced: Expanded black level. (0 IRE)
Normal:
Standard black level. (7.5 IRE)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Karaoke Vocal
LANGUAGE
PICTURE
DISPLAY
OPERATION
AUDIO
Off: The primary vocal is not output.
On: The primary vocal is output when it is recorded
on the disc.
Au d io O u t Se le ct
Bitstre a m
O n
Dy n a m ic Ra n g e Co n tro l
Ka ra o k e Vo ca l
O ff
AUDIO
Notes
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background
accompaniment.
DVD VCD
CD
Audio Out Select
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD video
player.
Select the output sound format corresponding to your
system connection.
33
For details of sound recording systems, see
.
Bitstream:
Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
18 19
MPEG1 or MPEG2 decoder.
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 2ch: Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks. 16 18
PCM:
Select when connected to a 2 channel
digital stereo amplifier. 19
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
DVD
Dynamic Range Control
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD video disc.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
LANGUAGE
PICTURE
AUDIO
OPERATION
LANGUAGE
PICTURE
AUDIO
DISPLAY
DISPLAY
O
PERATI
O
N
O n -Scre e n Disp la y s
O SD Ba ck g ro u n d Co lo r
Scre e n Sa ve r
O n
Pa u se / Still
Au to
Gra y
O n
Pa re n ta l Lo ck
O ff
O n
O ff
O n
DISPLAY
OPERATION
Re m o te Co n firm a tio n
Title Sto p
PBC
DVD
DVD VCD
CD
On-Screen Displays
Pause/Still
Off: Operational modes (e.g. “Play”, “
displayed.
On: Operational modes (e.g. “Play”, “
displayed on-screen.
”) are not
”) are
Auto:
For normal use. Still and fast motion images
can be paused.
Frame: The resolution of still pictures is improved,
so that you can make a motionless picture
more clearer when you pause it.
DVD VCD
CD
OSD Background Color
DVD
Parental Lock
Blue: Blue background.
Gray: Gray background.
DVD video discs equipped with the parental lock
function are rated according to their content. The
contents allowed by a parental lock level and the way
a DVD video disc can be controlled may vary from
disc to disc. For example, if the disc allowed you
could edit out violent scenes unsuitable for children
and replace them with more suitable scenes, or lock
out playback of the disc altogether.
DVD
Screen Saver
Off: The screen saver is disengaged.
On: The screen saver operates.
• DVD video discs may or may not respond to the
parental lock settings. This is not a defect in the DVD
video player. Make sure this function works with your
DVD video discs.
Off: The parental lock feature does not function.
After pressing the ENTER button, follow step 1)
below.
On: To activate the parental lock feature or change
the settings.
After pressing the ENTER button, follow steps
1) - 2) below.
DISPLAY
LANGUAGE
PICTURE
AUDIO
O
PERATI
O
N
Pa u se / Still
Au to
O ff
O n
Pa re n ta l Lo ck
O ff
O n
O ff
O n
Re m o te Co n firm a tio n
Title Sto p
Se cu rity Co d e
PBC
40
Download from Www.Somanuals.com. All Manuals Search And Download.
1) Press the number buttons to create a personal
4-digit security code, then press ENTER.
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
DVD VCD
CD
Remote Confirmation
Off: The beeper does not sound.
On: The beeper sounds with each remote operation.
2) Press the
/
buttons to select the parental
DVD
Title Stop
lock level, then press the ENTER button.
Off: The DVD video player continues after playback
of a title is completed.
USA
On: The DVD video player stops after playback of a
title is completed.
Lo ck e d
Le ve l
Le ve l
Le ve l
Le ve l
Le ve l
Le ve l
Le ve l
Le ve l
8
7
6
5
4
3
2
1
Vie w a b le
VCD
PBC
Off: When playing a VIDEO CD without using the
menu.
On: To use the menu when playing a PBC-featured
VIDEO CD.
You cannot play DVD video discs rated higher than
the level you selected unless you cancel the parental
lock function.
For example, when you select level 7, discs rated
higher than level 7 are locked out and cannot be
played.
The parental lock level is equivalent to the following
USA movie ratings.
Level 7: NC-17
Level 6: R
Level 4: PG 13
Level 3: PG
Level 1: G
To change the parental lock level
Follow steps 1) - 2).
To change your 4-digit security code
1) After selecting “On” or “Off,” press the STOP
button four times, then press the ENTER
button.
STOP
STOP
STOP
STOP
ENTER
The 4-digit security code is cleared.
2) Press the number buttons to create a new
4-digit security code.
3) Press the ENTER button.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Table of Languages
Table of languages and their abbreviations
Abbreviation
Language
Abbreviation
Language
Abbreviation
Language
– – –
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
Sango
Malay
Spanish
Afar
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
IW
JI
SK
SL
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Yiddish
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Irish
Scottish Gaelic
Galician
Xhosa
Yoruba
Zulu
GL
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
No power.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
16
The DVD video player turned • The automatic power off function turned
• Press the PLAY button.
21
20
off by itself.
the unit off.
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
• The video cable is not connected securely. • Connect the video cable securely into the 16, 17
appropriate jacks.
No sound.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
20
• The audio cable is not connected securely. • Connect the audio cable securely into the 16, 17
appropriate jacks.
18, 19
• The audio receiver or TV is turned off.
• Turn on the equipment connected with
the audio cable.
20
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
33, 35
39
The playback picture has
occasional distortion.
• The disc is dirty.
• Eject the disc and clean it.
9
–
• It is in fast forward or fast reverse
playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Brightness is unstable or
noises are present in the
playback pictures.
• The effect of copy protection.
• Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VCR or TV/VCR combination.
16
The DVD video player does
not start playback.
• No disc is inserted.
• Insert a disc.
20
10
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and color system.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
20
20
• The disc is not placed within the guide.
• Place the disc correctly inside the guide
on the disc tray.
• The disc is dirty.
• Clean the disc.
9
• The parental lock function is set.
• Cancel the parental lock function or
change the parental lock level.
35, 40
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback,
memory playback, etc.
• These operations may prevent a proper
progress of the contents.
–
–
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
•
Turn the power on or off with the ON/
STANDBY button. Or disconnect the power
plug and insert it into the wall outlet again.
The remote control does not
work properly.
• The remote control is not pointed at the
remote sensor of the DVD video player.
• Point the remote control at the remote
sensor of the DVD video player.
15
15
15
• The remote control is too far from the DVD • Operate the remote control within about
video player.
7 m.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Specifications
DVD video player / outputs / supplied accessories
DVD Video Player
Power supply
Power consumption
Mass
100 – 240 V AC, 50/60 Hz
14 W
3.0 kg
External dimensions
Signal system
Laser
430 × 81 × 305 mm (W/H/D)
Standard NTSC
Semiconductor laser, wavelength 650 nm
Frequency range
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Signal-to-noise ratio
Audio dynamic range
Harmonic distortion
Wow and flutter
More than 112 dB
More than 105 dB
Less than 0.002 %
Below measurable level (less than ±0.001 % (W.PEAK))
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Operating conditions
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack × 2
Audio output (BITSTREAM/PCM)
Audio output (ANALOG)
0.5 V (p-p), 75 Ω, pin jack × 1
2.0 V (rms), 220 Ω, pin jacks (L, R) × 1
Supplied Accessories
Audio/video cable ................................................. 1
Remote control (SE-R0036) ................................. 1
Batteries (AA) ....................................................... 2
Power cord ............................................................ 1
Plug adapter ......................................................... 1
• Designs and specifications are subject to change without notice.
Printed in Japan
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|