HD DVD player
HD-EP35KB
HD-EP35KE
*
* The DTS-HD Advanced Digital Out logo indicates that this product when properly upgraded can enable full DTS-HD Advanced
Digital Out capabilities. Please contact Toshiba Customer Solutions for update information.
Owner’s manual
HD-EP35KE_Eng.indd
1
07.8.30 7:34:35 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your player.
Model No.
Serial No.
Retain this information for future reference.
Location of the required label
The rating plate and the safety
caution are on the rear of the unit.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the product.
3
HD-EP35KE_Eng.indd
3
07.8.30 7:34:36 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
2. Keep these instructions.
3. Head all warnings.
ADDITIONAL SAFETY INSTRUCTIONS
14. Do not overload wall outlets; extension cords, or
integral convenience receptacles as this can result in a
risk of fire or electric shock.
4. Follow all instructions.
15. Never expose the apparatus to dripping or splashing
or place items such as vases, aquariums, any other
item filled with liquid, or candles on top of the unit.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
16. Keep your fingers well clear of the disc tray as it
is closing. Neglecting to do so may cause serious
personal injury.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
17. Do not place anything on top of this unit.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produces heat.
18. Do not place the apparatus on amplifiers or equipment
that may produce heat.
9. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
19. Never block or cover the slots or openings in the unit.
Never place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in
cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the
unit from overheating and to help maintain reliable
operation.
10. Only use attachments/accessories specified by the
manufacturer.
11. Do not place a flaming object such as a burning
candle on the apparatus.
20. Do not use a cracked, deformed, or repaired disc.
These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
12. Unplug this apparatus during lightning storms or when
unused for long period of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
21. If the apparatus should emit smoke or an unusual
odor, immediately disconnect the power cord from the
wall outlet. Wait until the smoke or smell stops, then
ask your dealer for a check and repair. Neglecting to
do so may cause fire.
22. During thunderstorms, do not touch the connecting
cables or the apparatus.
23. The mains plug is used as the disconnect device,
therefore install the player near the wall outlet so that
the mains plug can be accessed easily at all times.
4
HD-EP35KE_Eng.indd
4
07.8.30 7:34:36 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Notes on handling
Playback restrictions
• Never disconnect the power cord from a wall outlet while
the player is turned on, unless it is in an emergency.
Doing so may cause malfunction.
• When shipping the player, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed at
the factory.
• Do not use volatile liquids, such as insect spray, near the
player. Do not leave rubber or plastic products in contact
with the player for a long time. They will leave marks on
the finish.
This owner’s manual explains the basic instructions for
this player. Some HD DVD discs or DVD video discs
are produced in a manner that allows specific or limited
operation during playback. As such, the player may not
respond to all operating commands. This is not a defect in
the player. Please refer to the notes on compatible discs
later in this Introduction and to the discussion of DVD
playback and features later in this manual.
“ ” may appear on the TV screen during operation. “ ”
means that the operation is not permitted by the player or
the disc.
• The top and rear panels of the player may become warm
after a long period of use. This is not a malfunction.
About software
Because of problems and errors that can occur during
the creation of HD DVD, DVD and CD software and/or
the manufacture of HD DVD, DVD and CD discs, Toshiba
cannot assure that this player will successfully play
every disc bearing the HD DVD, DVD or CD logos. If you
happen to experience any difficulty playing an HD DVD,
DVD or CD disc on this player, please contact Toshiba
customer service.
When not in use
• For usual absence
Be sure to remove the disc from the player and turn off
the power.
• Prolonged absence
Unplug the player from a wall outlet. (This will stop the
clock. Display “SETUP MENU” by pressing SETUP (
page 32), and reset the clock.)
Some differences
Notes on locating
The HD DVD player operates more like a computer and
differently than a standard DVD player. In addition to
containing a microprocessor, it contains an operating
system, random access memory (RAM), and an HD DVD
drive. The operating system includes software that is
transferred to the RAM when the machine is turned on
and at other times during operation. This transfer can take
time. Therefore, when you turn the HD DVD player on, it
may take a little while before it is ready to use. Likewise,
other functions may not be performed as quickly as they
would on other AV equipment. Please take these factors
into consideration as you use the HD DVD player.
• Place the player on a level surface. Do not use it on a
shaky or unstable surface such as a wobbly table or
inclined stand. The loaded disc may dislodge from its
proper position and cause damage to the player. Before
placing the player, make sure that the surface can stand
the weight of the player. Never place the player in a high
location to avoid damage to the product or person by an
accidental fall of the player.
• When you place this player near a TV, radio, or VTR, the
playback picture may become poor and the sound may
be distorted depending on the condition and location of
said equipment. In such an event, place the player as far
away as practical from the TV, radio, or VTR.
• To avoid damage to this product, never place or store
the unit in direct sunlight; hot, humid areas; or areas
subject to excessive dust, oily smoke, cigarette smoke or
vibration.
Notes on cleaning
Use a soft, dry cloth for cleaning.
• Do not use any type of solvent, such as thinner or
benzine, as they may damage the surface of the player.
About the volume level
The volume level of some commercial HD DVD and DVD
discs may seem lower than that of audio CDs, other
software, etc. If you turn up the volume of the TV or
amplifier to play such discs, be sure to turn it back down
after playback finishes.
5
HD-EP35KE_Eng.indd
5
07.8.30 7:34:36 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions (Continued)
Notes on moisture condensation
Notes on copyright
Moisture condensation damages the unit. Please read
the following carefully.
• The unauthorized recording, use, display, distribution, or
revision of television programs, videotapes, HD DVDs,
DVDs, CDs and other materials, is prohibited under the
Copyright Laws of the United States and other countries,
and may subject you to civil and/or criminal liability.
• This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the unit.
Optical pick-up
lens
Moisture condensation occurs during the following
cases.
• When you bring the unit directly from a cold place to a
warm place.
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
• When you use the unit in a room where you just turned
on the heater, or a place where the cool air from an air
conditioner blows directly on the unit.
• When the unit is moved from an air conditioned room to
a hot, humid location.
Manufactured under license from DTS, Inc. under one or
more of the following U.S. Pat. No's: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and
world-wide patents issued and pending. “DTS” is a registered
trademark of DTS, Inc. and “DTS-HD Advanced Digital Out” is
a trademark of DTS, Inc. Copyright 1996, 2002-2006 DTS, Inc.
All Rights Reserved.
• When you use the unit in a humid place.
Do not use the unit when moisture condensation may
occur.
If you use the unit in such a situation, it may damage discs
and internal parts. Connect the power cord of the unit
to the wall outlet, turn on the unit, remove the disc, and
leave it for two or three hours. After two or three hours, the
unit will have warmed up and evaporated any moisture.
Keep the unit connected to the wall outlet and moisture
condensation will seldom occur.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing
LLC.
SHARC and Melody are registered trademarks of Analog
Devices, Inc.
VRS is a trademark of Anchor Bay Technologies, Inc.
Wall outlet
and
are trademarks of DVD Format/
Logo Licensing Corporation.
All other brand and product names mentioned in this manual
are trademarks and/or registered trademarks of their respective
holders.
6
HD-EP35KE_Eng.indd
6
07.8.30 7:34:37 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
SAFETY PRECAUTIONS .......................................2
IMPORTANT SAFETY INSTRUCTIONS ...............4
Precautions ...........................................................5
Table of contents...................................................7
Features ................................................................. 8
Disc compatibility........................................................ 8
Customer support....................................................... 9
Index to parts and controls ................................10
Accessories .........................................................12
Remote control ...................................................12
Loading batteries...................................................... 12
TV control................................................................. 13
Preparation...........................................................14
Resolution and connections ..................................... 14
Step 1: Connecting to a TV ..................................... 15
Step 2: Connecting to audio system............... ..........16
Step 3: LAN connection............................................ 17
Step 4: Power connection ....................................... 18
Step 5: Powering on................................................. 18
Step 6: Setting up the player.................................... 19
A: Language.............................................. 19
Customizing the function settings.....................32
Settings .................................................................... 33
Picture ...................................................... 33
Audio......................................................... 34
Language .................................................. 35
Ethernet .................................................... 37
General .................................................... 37
Firmware update ....................................... 38
Before calling service personnel ......................39
Specification ........................................Back cover
INFORMATION ON CUSTOMER
SUPPORT .........................................Back cover
B: Time...................................................... 20
C: Resolution............................................. 21
D: Audio output ......................................... 22
E: Ethernet ................................................ 24
Playing..................................................................26
Playing a disc........................................................... 26
To pause playback.................................... 27
To stop playback ...................................... 27
To resume playback from the location
last stopped............................................... 27
To change playback speed. ...................... 27
To select the sound .................................. 28
To select subtitles .................................... 28
To select the camera angle....................... 28
To locate a position .................................. 29
To play repeatedly..................................... 29
To check the current status....................... 29
HD DVD playing options in the future....................... 30
A/B/C/D buttons ........................................ 30
Cursor controls.......................................... 30
Controller port ........................................... 30
Requirements for HD DVD discs/
Web-enabled network content .................. 30
Output sound conversion table .........................31
7
HD-EP35KE_Eng.indd
7
07.8.30 7:34:37 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Disc compatibility
Discs which can be played on this player are as follows.
The icons (
discs.
) are used in this manual to indicate features and/or functions that are applicable to various types of
Disc
Specification
Prerecorded discs
HD DVD video disc
3
12cm (4 /4 in.)
HD DVD video discs are high-density, high-capacity discs.
• The HD DVD disc standard has been approved by the DVD forum.
• HD DVD (single layer): 15 GB
HD DVD
(
)
• HD DVD (dual layer): Maximum capacity of 30 GB
• A single layer single sided disc (15 GB) has capacity of about 8 hours in 1125 line high
definition picture; about 48 hours in 525 line standard definition picture (depending on
bitrate of pre-recorded contents).
*1GB means 1,000,000,000 bytes.
• HD DVD Twin Format Discs have both HD DVD and DVD layers on one side. HD DVD
Combination Format Discs have HD DVD material on one side and DVD material on the
other side.
3
1
DVD video disc
12cm (4 /4 in.) / 8cm (3 /4 in.)
Region number 2 or ALL
The region number of this HD DVD player is 2. If region numbers, corresponding to a specific playable
area, are printed on your DVD video disc and you do not find “2” or “ALL”, or the disc is encoded to
permit playback only in regions other than Region 2, disc playback will not be allowed by the player.
DVD-Video
(
)
3
1
Audio CD
12cm (4 /4 in.) / 8cm (3 /4 in.)
CD
(
)
Recordable discs
DVD-RW
DVD VR mode recording
(CPRM compatible discs
supported.)
DVD-R
DVD VR mode recording
(CPRM compatible discs
supported.)
DVD Video mode recording
Finalized discs only.
DVD Video mode recording
Finalized discs only.
DVD-RW
(
)
)
DVD-R
(
)
)
CD-RW
CD-DA (audio CD) format
Finalized discs only.
CD-R
CD-DA (audio CD) format
Finalized discs only.
CD
CD
(
(
Notes
• This player can play pictures of the PAL/NTSC colour system only.
• You cannot play non-standardized discs even if they may be labeled as above.
• Discs other than the above cannot be played. Even some of the above discs may not be able to be played depending on their state.
• Blu-ray Discs cannot be played on this player.
Notes on handling discs
• Do not touch the playback side of the disc.
• Do not stick paper or tape to discs.
• Fingerprints and dust on the disc may cause picture and/or sound deterioration or prevent playback. Wipe the disc from the centre outwards
with a soft cloth. Always keep the disc clean.
• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the
disc.
• Refer to the instructions of the disc as well.
• Do not store discs in a place subject to direct sunlight or near heat sources.
• Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
8
HD-EP35KE_Eng.indd
8
07.8.30 7:34:37 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes about HD DVD
Notes on web-enabled network content
HD DVD with high-definition content required for HD
viewing. Viewing high-definition content and up-converting
DVD content may require an HDCP capable DVI or HDMI
input on your 50/60 Hz display device. Up-conversion
of DVD content will result in near HD picture quality.
Firmware update may be required for some interactive
features depending on content, which may also require an
always-on broadband internet connection. Some features
may require additional bandwidth. Some recordable media
may not be supported. Dolby Digital Plus, Dolby TrueHD
and DTS support for up to 5.1 channels (DTS HD support
for DTS core only). MP3/WMA audio files not supported.
Because HD DVD is a new format that makes use of new
technologies, certain disc, digital connection and other
compatibility and/or performance issues are possible.
This may, in rare cases, include disc freezing while
accessing certain disc features, or functions, or certain
parts of the disc not playing back or operating as fully
intended. If you experience such issues, please contact
highdefinitiondvd.eu/. Some features subject to delayed
availability. 1080p capable display required for 1080p
output resolution. Deep Color feature as specified in HDMI
1.3a requires compatible Deep Color capable HD display
and/or device. In some cases, the included remote control
may not operate additional devices or certain features of
such devices, in which case, it is suggested that you use
the original remote control for the applicable device. Use
of REGZA-Link which is a feature based on HDMI-CEC
requires an HDMI-CEC compatible display device. For 24p
output, content that was created in 1080p / 24 frames/sec
is required. Viewing 24p output requires an HD display
capable of accepting a 1080p/24Hz signal. While every
effort has been made at the time of publication to ensure
the accuracy of the information provided herein, product
specifications, configurations, system/component/options
availability are all subject to change without notice.
Certain HD DVD discs may contain or have the capability
of downloading studio-provided, web-enabled network
content. To minimize any potential compatibility and/or
connectivity issues, before viewing such content, it is
recommended that you perform the firmware update
process to ensure that your HD DVD player is using the
latest firmware version. Do not unplug or turn off the HD
DVD player when downloading studio-provided, web-
enabled network content. Doing so may cause data stored
in the player’s persistent storage to be lost.
HD output jacks
• An HDMI jack for connecting a single cable to output
video and audio signals
• Component jacks
• 5.1 channel surround analog audio jacks
Certain system requirements
For high definition video playback:
• 50/60 Hz compatible HD display (some discs may
require HDCP capable input)
• HD DVD disc with HD content
For Dolby® Digital Plus and Dolby TrueHD multi-channel
audio playback:
• A/V Receiver with HDMI™ multi-channel LPCM capable
audio input and 5.1 channel speaker setup.
Customer support
Please contact Toshiba customer service for your country
Before accessing, try updating this player’s firmware. For
details on how to update, see “Update (Firmware update)”
(
page 38).
This HD DVD player is manufactured under the HD DVD
Format adopted by the DVD Forum. The DVD Forum
approved AACS (Advance Access Content System)
as content protection system for HD DVD format like
it approved CSS (Content Scramble System) for DVD
format. Therefore, certain restrictions are imposed on play,
analog signal output, etc. of AACS protected contents.
When you use pre-recorded contents, the contents may
designate whether or not to apply such restrictions.
As those restrictions may be adopted and/or changed and
announced by AACS after the production of this product,
the operation of this product and restrictions thereon may
vary depending on the time you purchase this product as
well as during the life of this product.
Note
• The firmware in this player can be updated. See
details.
page 38 for
To obtain updated information about AACS and this
product, please contact Toshiba customer service for your
9
HD-EP35KE_Eng.indd
9
07.8.30 7:34:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to parts and controls
Front panel
1
2
3
4
5
6
7 8 9
No. Control
Function
Page
18
ON/STANDBY button
ON/STANDBY indicator
Front panel display
Remote sensor
Turns the power on or restores the unit to the standby mode.
Blue: power on / Red: standby mode
See the next page.
1
2
3
4
5
6
18
11
12
Receives infrared signals from the remote control.
Loads a disc into the disc drive.
Disc tray
26
Extension port
For future functions.
30
Locates a chapter or track.
27
7
/
(SKIP) buttons
: forward direction /
: reverse direction
Stops playback momentarily.
27
27
26
26
8
9
10
11
(PAUSE) button
(STOP) button
Stops playback.
Starts playback.
(PLAY) button
OPEN/CLOSE button
Opens and closes the disc tray.
Rear panel
1
2
3 4
5
6 7
8
9
No. Control
Function
Connect the supplied power cord.
Do not cover the ventilation holes.
Page
18
AC IN socket
1
2
3
Ventilation fan
LAN port
–
Use this to connect to a network with an always-on broadband connection. 17
Outputs digital audio signals. Connect to a digital audio input on an
amplifier equipped with digital audio decoder. When connecting the optional 16
digital cable, fit the connector into the jack firmly.
DIGITAL AUDIO OUTPUT BITSTREAM/
PCM OPTICAL jack
4
ANALOG AUDIO OUTPUT 5.1CH
SURROUND jacks
VIDEO OUTPUT jack
Outputs analog audio signals. Connect to an amplifier equipped with 5.1
channel audio input.
Outputs video signals to a connected TV or amplifier.
Outputs video signals to a connected TV or monitor.
Connect to a TV or monitor equipped with component video jacks.
Outputs video/audio signals to a connected TV, monitor or AV amplifier.
Connect to a TV, monitor or AV amplifier equipped with HDMI input.
5
6
7
16
15
15
COMPONENT VIDEO OUTPUT jacks
HDMI OUTPUT jack
15
16
8
9
ANALOG AUDIO OUTPUT jacks
Outputs audio signals to a connected TV or AV amplifier.
10
HD-EP35KE_Eng.indd 10
07.8.30 7:34:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
No. Function
1
7
9
11
13 15 16 18
12 14 17
A CD is loaded.
8
9
2 3
6
8
10
19
A disc which contains advanced content is loaded.
Total playing time is displayed.
Remaining playing time is displayed.
Shows a chapter number.
4 5
10
11
12
13
14
15
16
17
Shows a track number.
No. Function
Multi channel sound is output.
2ch sound is output.
Displays the video output format currently selected.
(i: interlaced, p: progressive)
1
Playing a scene recorded with multi angles.
Playing in repeat mode.
2
3
4
5
6
: Playing
: Pausing
HDMI connection is verified between the player and another
device.
: Fast forward playback
: Fast reverse playback
Shows a title number.
18
Displays the total playing time of the disc, elapsed
time, remaining time, a number of title, chapter or track,
messages, etc.
19
HD DVD: An HD DVD is loaded.
DVD: A DVD is loaded.
7
Pressing DIMMER button on the remote control changes the
brightness of the display. (Normal / dimmed / off)
• Turning off the power resets this setting.
Remote control
No. Function
Page
1
2
3
4
5
18
27
27
26
To resume playback while playing an HD DVD.
9
10
11
19
20
21
22
To pause playback.
To start playback.
To locate a title, chapter or track in the reverse
direction.
27
12
6
To play fast in reverse direction.
27
29
13
14
23
24
7
To display a repeat mode menu.
To set the 8 direction buttons to move the cursor
during HD DVD playback.
To enter numbers.
For future functions which may become available
by software update.
8
9
10
11
12
13
30
29
–
15
16
17
25
26
27
28
29
30
31
32
33
34
35
To adjust TV volume.
13
18
26
29
28
28
18
19
20
21
22
23
To turn the power on or off.
To open/close the disc tray.
To display operating status.
To select a camera angle.
To display subtitles.
To display a menu included on many DVD video
discs.
To enter a selected content.
To return to the previous menu.
To stop playback.
14
15
16
26
24
17
20, 26
20
25
26
27
36
27
To locate a title, chapter or track in the forward
direction.
27
28
To play fast in forward direction.
27
27
27
29
30
31
No. Function
Page
13
To play in slow motion.
To change TV channels.
1
2
3
4
5
6
7
8
To play frame by frame.
To operate as indicated by the video display during
HD DVD playback.
To display a window to locate a title, chapter or
track.
To clear entered information.
To change the brightness of the display on the
player.
13
To turn the TV on or off.
To change inputs of the TV.
To mute the TV.
13
30
32
13
29
29
11
32
33
34
35
36
13
To program the remote control to control a TV.
To select the sound.
28
26
To display a top menu.
20, 26
To display the setup menu.
To select a content or position to enter.
11
HD-EP35KE_Eng.indd 11
07.8.30 7:34:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Remote control
Supplied accessories
Loading batteries
Check that the following accessories are supplied.
Open the cover and
load batteries (R03
size).
1
Remote control
Make sure to match the +
and – on the batteries to
the marks inside the battery
compartment.
Batteries
(R03)
Close the cover.
2
HDMI cable
Operating range
Remote sensor
Power cord
Within about 7 m
(For HD-EP35KB)
(For HD-EP35KE)
Caution
Notes
• Do not use this power cord
with any device other than this
player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote control.
• Do not disassemble the remote control.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment in
mind.
• Always dispose of batteries in accordance with applicable laws and
regulations.
• If the remote control does not operate correctly, or if the operating
range becomes reduced, replace all batteries with new ones.
• When necessary to replace batteries in the remote control, always
replace all batteries with new ones. Never mix battery types or use
new and used batteries in combination.
• Always remove batteries from remote control if they are dead
or if the remote control is not be used for an extended period of
time. This will prevent battery acid from leaking into the battery
compartment.
Caution
Never throw batteries into a fire.
12
HD-EP35KE_Eng.indd 12
07.8.30 7:34:39 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Brand name
LG Goldstar
Loewe
Luxor
Marantz
Matsui
Brand code
2491
2621 2771 2961 3311
2701
2991
2541 2581 2611 2651 2671 2691 2781 2851 2861
3151
2621
TV control
The remote control of this player is compatible with TV
controls.
Once you program the remote control (see the next
paragraph), the following controls are available. Operate
the remote control toward your TV.
Metz
Mitsubishi
National
Orion
2621 2701 2961 3371 4521
2701
To turn and off the TV.
To select the TV channel.
To adjust the voume.
2691 2781 2851 3381
Panasonic
2701 2711 2741 3001 3251 3531 3551 3761 3911
3951
2621
Philco
Philips
2561 2571 2591 2621 2811 2821 2881 2991 3461
3581 3731 3881 3981 4531 4541 4551
To mute the TV.
Pioneer
Saba
2761 3481 3681 3921 3931 3941
2621 2761 2841 3321
To change the video input.
Saisho
Samsung
2541 2651 2691 2731
2541 2631 2731 2991 3161 3231 3521 3541 3711
3721 3901 3961 4271 4561
To program the remote control to operate your TV
Sanyo
2611 2671 3391
1 While holding TV CODE,
press the number
Schneider
2571 2681 2811 2861 3991 4571 4581 4591 4601
4611
2731 3051
2661 2721
SEG
buttons to enter a
corresponding brand
code (see below) of your
Seleco
Sharp
2641 3401 3611 3631 3781 3791 3801 3811 3821
3831 3971
TV.
Singer
2621
While holding down,
enter a code.
Sinudyne
Sony
2551 2621 2651 2691 3011 3051
Some brands have several
codes. Try one by one until
the remote control can
operate your TV.
2551 2951 3621 3641 3651 3871 3891 4281 4621
e.g. To enter 0001
Tatung
2611
Technics
Telefunken
Tensai
2711 3001
2841 3421
2681 2781
2 Release TV CODE.
The brand code is
memorized.
Thomson
6641 2701 2761 2831 3431 3601 4631 4641 4651
4661
2581 2611 2951 2961 3221
Thorn
Notes
Universum
Zanussi
2731
2661
• TOSHIBA code is already set when
you operate this player for the first
time.
• When replacing the batteries of the
remote control, re-enter the brand
code of your TV.
Brand name
Toshiba
Brand code
2581 2601 3281 3491 3771 4291 4301 4311 4321
4671
Aiwa
3241
Akai
2671
Bang & Olufsen
Beko
Blaupunkt
Brionvega
Bush
2621
2941 3331 4471
2711 2801
2621
2541 2681 2691 2751 2781 2851 2861 2881 3291
4261 4481
Crown
Daewoo
Decca
2541 2871 2921
2541 2881 3221 3271
2611
Ferguson
Finlux
2761 2841 3351
2601 2611 2621
Fisher
2671 2981
Funai
2731 2781
GEC
2591 2611
Goodmans
Granada
Grundig
Hinari
2611 2691 2861 2881 3221 3841
2611 2671
2601 2701 3151 3441 4491
2541 2681 2691 2901
2591 3301 3471 3501 3511 3701 3671 4501
2611
Hitachi
Inno Hit
JVC
2861 3361 3591 4511
13
HD-EP35KE_Eng.indd 13
07.8.30 7:34:39 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Proceed the following steps to set the player ready.
Page 15
Step 1: Connecting to a TV
Step 2: Connecting to audio system
Step 3: LAN connection
Page 16
Page 17
Page 18
Page 18
Page 19
Step 4: Power connection
Step 5: Powering on
Step 6: Setting up the player
Resolution and connections
Check the type of video input on your TV. To view high definition content, use the
HDMI OUTPUT jack or the COMPONENT VIDEO OUTPUT jacks to connect to a
TV. Some discs may require use of the HDMI OUTPUT jack.
HDMI OUTPUT jack
Resolution from this player
Connection to this player
HD (High Definition)
SD (Standard Definition)
Signal
Video
Cable
Page
15
1080p 1080i
720p
480p/576p 480i/576i
TV input
HDMI INPUT
Yes
Yes
Yes
Yes
Yes
HDMI cable
Most
recommended*
Audio
(16)
15
Video
Audio
Video
Audio
Component video cable
Audio cable
No
Yes*
Yes*
Yes*
Yes*
Y
PB
PR
16
15
Composite video cable
No
No
No
No
Yes
VIDEO
16
Audio cable
* Some discs may prohibit output in this format. In this case, use the HDMI connection.
*Why HDMI connection is most recommended?
HD DVD and DVD video disc creators have the option to include copy protection instructions in their discs that prohibit
the output of some standard video or high definition video (original 720p, 1080i or 1080p or up-converted 480i/576i
or 480p/576p) from the COMPONENT VIDEO OUTPUT jacks. If such instructions are present in the disc you are
playing, you must use the HDMI OUTPUT jack to view the disc in a high definition format and the COMPONENT VIDEO
OUTPUT jacks, if activated, will output video only in 480i/576i or 480p/576p resolution.
14
HD-EP35KE_Eng.indd 14
07.8.30 7:34:40 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Connecting to a TV
• Connect the player directly to your TV. If you connect the player to a VTR, TV/VTR combination, video
selector or AV amplifier, the playback picture may be distorted due to copy protection.
• Be sure to turn off the power and unplug both units from the wall outlet before making any connections.
Via HDMI input
Notes
To view 1080p output, make this connection.
• When the HDMI connection is not verified, an error message
appears on the front panel display. In this case, disconnect the
HDMI cable then connect it again, or turn off the connected HDMI
device then turn it on.
• HDMI output is digital only, DVI analog is not supported.
• HDMI is an evolving technology, so it is possible that some devices
may not operate properly with this player.
HDMI transfers digital audio and uncompressed digital video
on a single cable. As a result, audio cables and video cables
don’t need to be connected separately to a device.
HDMI cable (supplied)
• To get the most possible benefit from Dolby Digital Plus, you
should connect your HD DVD player to your AV receiver using its
HDMI input. If your AV receiver has this type of input, make sure it
is connected to your HD DVD player and that the input is set to use
audio from HDMI (and not the SPDIF coaxial or optical input). If
your AV receiver does not have an HDMI input, then the next best
choice is to use the SPDIF (coaxial or optical) input on your AV
receiver.
HDMI INPUT
To HDMI OUTPUT
• If you use the SPDIF optical output or analog outputs to connect
your audio system and have the “Digital Out HDMI” ( page 22)
set to “Auto” or “PCM”, the audio output level from these jacks will
be reduced when listening to a multichannel disc. To restore the
audio output level, set “Digital Out HDMI” to “Downmixed PCM”.
• Be sure to confirm compatibility of a cable when connecting a
Deep Color compatible display device.
TV
Depending on the TV connected, you can use the CEC
function. For detail, see page 35.
When the output resolution ( page 21) is set to “480i” or “up to
1080p/24Hz”, Deep Color output is disabled.
Via component video input
Some discs may be down converted or require HDMI connection.
Not compatible with 1080p. To view 1080p output, select HDMI connection.
Component video cables
(not supplied)
To COMPONENT
VIDEO OUTPUT
Y
PB PR
This connection only sends video signals. Be sure to make audio
connection on page 16.
TV
Via VIDEO (yellow) input
480i/576i output only regardless of the resolution settings
Composite video (yellow) cable
(not supplied)
(
page 21) or the connections of other output jack.
To VIDEO OUTPUT
This connection only sends video signals. Be sure to make audio
connection on page 16.
TV
Note
• This player supports simultaneous output of video on its HDMI and component video ports. However, some discs may restrict output
of video on the component video ports when viewing high definition content or up-converted DVD content. The resolution on the
HDMI output will be the same as the resolution output on the component video output. Thus, because the HDMI output can change
automatically to match the maximum available resolution of your display, if you connect both the HDMI output and component output,
the resolution on the component output will change if the HDMI output auto-adjusts.
15
HD-EP35KE_Eng.indd 15
07.8.30 7:34:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation (Continued)
Step 2: Connecting to audio system
Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the benefits of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your
player to an AV receiver with an HDMI audio input.
This connection requires selection of “Digital Out HDMI” (Step 16, page 22).
Caution
HDMI cable
(supplied)
• When you are connecting (via the HDMI
OUTPUT jack) an AV decoder that does not
have Dolby Digital or DTS decoding capability,
be sure to set “Digital Out HDMI” ( page 22)
to “PCM” or “Downmixed PCM”. Otherwise,
high volume sound may damage your hearing
as well as the speakers.
HDMI cable
(not supplied)
HDMI INPUT
HDMI OUTPUT
HDMI INPUT
To HDMI OUTPUT
Note
AV amplifier
• You may need to adjust the HDMI audio output
to match the capabilities of your AV amplifier.
In this case, set “Digital Out HDMI” ( page
22) to “PCM”.
HDMI compatible
device
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a
receiver with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of “Digital Out SPDIF” (Step 16, page 22).
Optical digital cable (not supplied)
*To use the optical digital output, use an
optical cable to connect this jack to an
optical audio input on a device capable of
processing Dolby Digital, DTS bitstream, or
PCM audio.
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM OPTICAL
DIGITAL INPUT
OPTICAL
AV amplifier
Via 5.1ch analog audio output
This connection requires selection of “Speaker Setting” (Step 16, page 23).
Audio cable
(not supplied)
CENTER
L
L
R
R
SURROUND
AV amplifier
FRONT
SUBWOOFER
To ANALOG AUDIO
OUTPUT 5.1CH
SURROUND
16
HD-EP35KE_Eng.indd 16
07.8.30 7:34:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Via analog audio output
Sound is output only in 2ch format.
Audio cable (not supplied)
TV
To ANALOG
AUDIO OUTPUT
ANALOG AUDIO
INPUT
AV amplifier
Step 3: LAN connection
You may use the internet connection feature to update the player’s firmware. See page 35.
Some HD DVD discs may enable you to access special HD DVD sites, if you connect the player to the Internet via an
always-on broadband connection. For example, if an HD DVD site includes content such as links to future movie trailers,
you can watch the content on the player via the Internet. You do not need to connect to a PC to use this function.
Read the notes on page 28 as well.
Broadband modem
Connect either.
(with integrated router)
Use a commercially available straight LAN cable
(Category 5/CAT5 or better with RJ45 connector).
Press down to remove
Lock portion
Broadband
service
Plug
Broadband modem
Router
Caution
• When plugging or unplugging the LAN cable, hold the plug
portion of the cable.
• When unplugging, do not pull on the LAN cable but unplug while
pressing down on the lock.
• Do not connect a modular phone cable to the LAN port.
• Since there are various connection configurations, please follow
the specifications of your telecommunication carrier or internet
service provider.
Broadband
service
Note
• Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable
terms of service. For details, contact your ISP.
17
HD-EP35KE_Eng.indd 17
07.8.30 7:34:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation (Continued)
Step 4: Power connection
After completing all connections, connect the supplied power cord to the AC IN socket and a wall outlet.
ON/STANDBY indicator on the player illuminates in red.
Caution
ON/STANDBY indicator
• Do not power this player using any power cord other than the
one supplied with this player.
• Do not use the supplied power cord with any device other than
this player.
To a wall outlet
Step 5: Powering on
When the power turns on, ON/STANDBY indicator on the
front panel changes colour from red (standby mode) to
blue (operation).
Turn on the TV or monitor, and select the
input which the player is connected to.
1
2
Start up (and disc loading ( page 26)) may take time.
Press ON/STANDBY.
When you power on this player for the first time, the
setting menu will appear. Go to Step 6 to make the
necessary setup.
ON/STANDBY button
ON/STANDBY button
To power off the player
Press ON/STANDBY.
ON/STANDBY indicator
18
HD-EP35KE_Eng.indd 18
07.8.30 7:34:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Setting up the player
Make the settings which are necessary to operate the player.
Make sure that the following menu is displayed.
(If not, press SETUP to display it.)
1
SETUP MENU
To move a cursor
To enter the
Picture
Audio
Language
Ethernet
General
selected item
A: Language
Press
/
to select “Language”, then press OK.
2
To return to the
previous menu
SETUP MENU
Disc Menu Language
Subtitle Language
Audio Language
English
Picture
Audio
None
English
English
To input digits
Language
Ethernet
General
On Screen Language
Press
/
to select “On Screen Language”, then press OK.
3
Start
On Screen Language
English
To display the
setting menu
Disc Menu Language
Subtitle Language
Audio Language
English
French
None
German
English
Spanish
On Screen Language
English
Italian
Press
/
to select the language you want use for on-screen
4
5
displays, then press OK.
Press RETURN or to return to the menu of step 1.
19
HD-EP35KE_Eng.indd 19
07.8.30 7:34:42 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation (Continued)
B: Time
Press
OK.
/
to select “General”, then press
Press RETURN or to return to the menu of
step 1.
6
10
Parental Lock
Clock Set
Off
Off
Off
Off
ETUP MENU
OSD On/Off
Picture
Audio
Remote Controller Sound
HDMI Control
Maintenance
Language
Ethernet
General
Twin Format Disc
HD DVD
Press
OK.
/
to select “Clock Set”, then press
7
Confirm the time is correct.
8
9
If the time is correct, select “OK” by / ,
then press OK to return to the menu of step
2.
When the time needs to be corrected, set each item using
the following buttons.
After setting this item, press
.
Cock Set
Time Zone
Year
(GMT-4:00) Atlantic Time
2007
01
To correct the digit,
select the item again
Month
Day
01
by
/
then input a
Time
:
:
01 00 00 AM
new digit.
OK Cancel
After setting this, press
then to select “OK” then
press OK button.
20
HD-EP35KE_Eng.indd 20
07.8.30 7:34:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
C: Resolution
Press
/
to select “Picture”, then press OK.
11
SETUP MENU
Picture
TV Shape
16:9
Standard
Auto
Audio
RGB Output Range
Language
Ethernet
Picture Mode
General
Resolution Setting
up to 1080i
Press
/
/
to select “Resolution Setting”, then press OK.
12
13
Press
to select the resolution according to the performance of your TV as shown in the
table below, then press OK.
TV input
“Resolution Setting”
480i/576i
up to 480p/576p
up to 720p
e.g.
Select the resolution.
HDMI input
up to 1080i
up to 1080p
HDMI INPUT
up to 1080p/24Hz
e.g.
Select the resolution
(except “up to 1080p”
and “up to 1080p/
24Hz”) according to
the performance of
the connected TV.
480i/576i
up to 480p/576p
up to 720p
up to 1080i
up to 1080p
Component video
input
1080i
TV
up to 1080p/24Hz
VIDEO (yellow) input
Select any resolution except “up to 1080p/24Hz”.
You may find that setting the output resolution of the player to match as closely as possible the native resolution of your display
provides the best picture performance (e.g., 720p for 720p and 1080p for 1080p).
Note
• In case the menu of “Resolution Setting” disappears, make composite video (yellow) connection to restore it, then select the
resolution which is compatible with the connected TV.
HD DVD DVD-Video
For best viewing of film movie material (24p output)
Movies that are produced on film, as opposed to video, are traditionally captured at a frame rate of 24 frames per second. Your
player can maintain the 24 frames per second frame rate of such movies, allowing you to enjoy them in their native form. To
enable this feature, connect an HD display capable of accepting a 1080p/24Hz signal and select “up to 1080p/24Hz.”
Note
• Most film based HD DVDs display images at 24 frames per second and video based HD DVDs display images at 30 frames or
60 fields per second. Depending on the content, “up to 1080p/24Hz” may lower smoothness of playback and/or reduce vertical
resolution. In the case of video based HD DVDs, we recommend that the output resolution setting is changed from “up to
1080p/24Hz”.
Press RETURN or to return to the menu of step 1.
14
21
HD-EP35KE_Eng.indd 21
07.8.30 7:34:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation (Continued)
D: Audio output
Press
/
to select “Audio”, then press OK.
15
SETUP MENU
Picture
Digital Out SPDIF
Bitstream
Auto
Off
Audio
Digital Out HDMI
Language
Ethernet
Digital Direct Audio Mode
General
Dynamic Range Control
Auto
Off
Dialog Enhancement
Speaker Setting
5.1ch
When you connected an audio system to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack
( page 16):
16
Press
/
to select “Digital Out SPDIF”, then press OK.
Select one of the followings according to your connection, and press OK.
Bitstream
When an AV receiver or processor equipped with built-in Dolby Digital, DTS or MPEG
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is
output. When you play a disc recorded in DTS-HD format, the sound is converted to a DTS bitstream.
If the AV receiver or processor does not support DTS, select “PCM”.
Digital Ot SPDIF
Bitstream
PCM
PCM
When a 2ch digital stereo amplifier is connected to this player.
When you play an HD DVD or DVD video disc recorded in Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD format, sound is converted into PCM (2ch) format.
When you connected an HDMI device to the HDMI OUTPUT jack ( page 15, 16):
Press
/
to select “Digital Out HDMI”, then press OK.
Select one of the followings according to your connection, and press OK.
Auto
When an HDMI device equipped with built-in Dolby Digital, DTS, MPEG or linear PCM
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus, Dolby TrueHD or DTS-HD, PCM is output (core
only for DTS-HD).
Digital ut HDMI
When you play a disc recorded in Dolby Digital or DTS format, digital audio signal (bitstream audio)
is output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG, sound is
converted into linear PCM to output.
Auto
PCM
Downmixed PCM
To output high bitrate audio, select “Auto”, then make another setting. For details, see page 34.
PCM
When an HDMI device which has multi channel input is connected to this player.
When you play an HD DVD or DVD video disc recorded in multi channel in Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS or DTS-HD format, the sound is decoded and output in multi
channel in linear PCM format.
Downmixed PCM
When a 2ch digital stereo AV receiver or processor is connected to this player.
When you play a DVD video disc recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is
converted into PCM (2ch) format to output.
Note
• Setting “Auto” or “PCM” will reduce output level of multi channel sound from the ANALOG AUDIO
OUTPUT jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:
– view the playback picture on an HDMI TV connected to this player.
– play an HD DVD video disc of a certain type, recorded in linear PCM format.
In this case, the output level will be restored by setting to “Downmixed PCM”.
22
HD-EP35KE_Eng.indd 22
07.8.30 7:34:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
When you connected an audio system to the ANALOG AUDIO OUTPUT jacks ( page 16, 17):
Press
/
to select “Speaker Setting”, then press OK.
Select one of the followings according to your connection, and press OK.
5.1ch
When a 5.1 channel surround system is connected to this player.
1 Set the speaker sizes, distance to each speaker and the crossover frequency.
3PEAKE3ETTING
Front Left / Front Right
Small: Select if the speaker cannot output low frequency.
Large: Select if the speaker can output low frequency.
ꢀꢁꢂCH
ꢃCH
e.g.
Center / L Surround / R Surround
Small: Select if the speaker cannot output low frequency.
Large: Select if the speaker can output low frequency.
None: When the speaker is not connected.
Front Left
Large
0.00
Subwoofer
Use:
When a subwoofer is connected.
Don’t Use: When a subwoofer is not connected.
Large
Crossover Setting
Low frequency under this frequency (80Hz / 100Hz / 120Hz) will
be output to a connected subwoofer.
m
Select a distance to each speaker from the listening position.
2 Select “Next”, then press OK.
To cancel to return to the previous screen, select “Clear”, then press OK.
To save your selection and finish the setting, select “End”, then press OK.
3 Select “Automatic Test Tone”, then press OK.
A test signal is set to each speaker.
4 Adjust each of the volumes by
/
, selecting
speakers by so that each speaker can
/
sound at the same volume.
For further adjustment, check the channel balance
on the amplifier.
EꢁGꢁ
&RONT ,EFT
#ENTER
5 When complete, select “End”, then press OK.
ꢄ
ꢄ
D"
D"
Note
• This setting is effective only when “Digital Out SPDIF”
(
page 22) is set to “PCM”.
2ch
When a 2ch stereo system is connected to this player.
Press RETURN or to return to the menu of step 1.
17
(Continued)
23
HD-EP35KE_Eng.indd 23
07.8.30 7:34:45 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation (Continued)
E: Ethernet
Perform this setting if you connect the player to your LAN ( page 17).
After performing this setting, you need to turn off this player and turn it on again to activate this setting.
If you do not connect, skip to Step 20.
Press
Press
/
/
to select “Ethernet”, then press OK.
18
19
to select each of the followings, then press OK.
DHCP
Off
To set your network information.
1
2
Proxy Setting
MAC Address
NTP Server
Off
Off
To input proxy server address (when your provider requires the setting).
To display the Mac address of the player. (Fixed. No need to set.)
To adjust the player’s clock via the network time protocol.
To select the speed according to the specification of your LAN.
To select whether you access “Cookies” or not.
Off
Network Speed
56kbps Modem
Accept
3
4
5
Cookie Setting
1
2
Proxy Setting
DHCP
Enter the proxy server address when your provider
requires proxy setting.
DHCP
On
1 Set “DHCP” to “On” and
press OK button.
The network information is
automatically set.
Off
0
DHCP
IP Address
0
0
0
.
.
.
0
0
0
.
.
.
.
.
.
0
0
0
Proxy Setting
Subnet Mask
0
1 Set “Proxy” to “On” and
press OK button.
On
Off
Proxy
Server
Port
Gateway
0
Skipped when “DHCP”
is set to “On”.
2 Set “DNS” to “On” and
press OK button.
The DNS server is obtained
automatically from the
DHCP server.
0
2 Enter the specified data
from the provider.
OK
Cancel
Gateway
DNS
0
.
On
.
0
.
0
Off
0
.
.
0
0
Refer to the instructions
below for inputting
characters. (Server, Port)
3 Select “OK” and press
OK button.
DNS Server
0
0
.
Confirm
OK Cancel
3 Select “Confirm”, then
press OK button.
Confirming starts.
Skipped when “DNS”
is set to “On”.
If the setup is successful,
an IP address appears.
Press OK button.
How to input characters
To begin or finish input.
OK button
buttons
buttons
CLEAR button
/
To select a character.
If the setup is not successful:
To move to the next character.
To erase to correct.
/
DHCP
a) Set “DHCP” to “Off” and
press OK button.
The network information is
automatically set.
On
Off
1
DHCP
IP Address
192 . 168 .
.
15
0
Number buttons To input a number.
Subnet Mask
255 . 255 . 255 .
Gateway
192 . 168 .
On
1
Off
1
.
.
1
DNS
DNS Server
192 . 168 .
Confirm
1
3
NTP Server
b) Input the addresses using the number buttons.
“IP Address”
This sets a different address within the
NTP Server
same subnet of the PC on your network.
e.g. if the IP address of the PC is
192.168.1.10, set 192.168.1.15 (or some
other unused address.)
On
Off
Select “On” or “Off” and press OK
button.
“On”
The player automatically
accesses an internet server
to adjust time protocol.
“Subnet Mask” This sets the subnet mask of the network
environment that will be connected.
e.g.: 255.255.255.0
“Off”
The player does not access
an internet server
“Gateway”
This sets the gateway used by the player
(e.g.: 192.168.1.1).
to adjust its clock.
“DNS Server”
This sets the DNS server to be used by the
player (e.g.: 192.168.1.1).
c) Select “OK” and press OK button.
24
HD-EP35KE_Eng.indd 24
07.8.30 7:34:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Network Speed
Cookie Setting
Cookie Setting
Accept
Network Speed
Select the speed and
press OK button.
Select “Accept” or “Not Accept”
and press OK button.
28.8kbps Modem
33.6kbps Modem
64kbps ISDN
Not Accept
56kbps Modem
128kbps ISDN
“Accept”
Cookies are accepted.
256kbps DSL/Cable
For other speeds:
1 Select “Other” and
384kbps DSL/Cable 512kbps DSL/Cable
press OK button.
768kbps DSL/Cable
1.5Mbps T1
Other
1Mbps Cable
Over 10Mbps
“Not Accept” Cookies are rejected.
This may disable
Network Speed (Other)
some services on
1
kbps
web pages.
OK
Cancel
2 Specify the speed by
number buttons.
3 Select “OK” and
press OK button.
Press RETURN or to return to the menu of step 1.
Press SETUP to close the menu.
20
21
If you made the LAN setting (“E: Ethernet”, page 24), press ON/STANDBY to turn the player off,
then press the button again to turn it on.
22
Your player is ready.
25
HD-EP35KE_Eng.indd 25
07.8.30 7:34:46 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing
Preparation
• Turn on the TV or audio system and select the corresponding input source that the player is connected to.
• Turn the power on. ( page 18)
Playing a disc
HD DVD DVD-Video DVD-RW
DVD-R
CD
31
Press OPEN/CLOSE to open the disc tray.
1
2
Place a disc in the hollow of the disc tray
with the playback side down.
1
When using a double-sided
disc, turn the label of the
playing side up.
MENU
/
/
/
OK
After placing a disc, press OPEN/CLOSE.
3
3
Playback starts.
If playback does not start, press (PLAY).
HD DVD DVD-Video
If a loaded disc contains a top menu, a top menu appears when you start playback.
Select a title by (or number buttons), then press OK.
/
/
/
Playback starts from chapter 1 of the selected title.
• Depending on the disc, you may need to press TOP MENU or MENU to display a top menu.
DVD-RW
DVD-R
Discs recorded on personal devices such as DVD recorders may contain menus, on which items can
be easily selected.
Press MENU, and select a title by
/
/
/
, then press OK.
Playback starts from the selected item.
• Discs recorded in DVD VR mode display the recorded contents not in thumbnails but in a list. Select an item on the
list and press OK button.
Notes
• Use the button on the front panel or the remote control to open and close the disc tray. Do not push or hold the disc tray while it is
moving. Doing so may cause the player to malfunction.
• Do not load a disc which is unplayable, or any object other than a playable disc.
• Do not apply downforce to the disc tray. Doing so may cause the player to malfunction.
• If the disc tray stops while closing, the mechanical protection system of this player will open it. Do not force it to close. Doing so may
damage the disc tray.
• If the disc tray will not open, turn the player off, and press OPEN/CLOSE on the front panel. This may turn the player on and open the
disc tray. If it still won’t open, contact TOSHIBA customer service.
26
HD-EP35KE_Eng.indd 26
07.8.30 7:34:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
To pause playback
HD DVD DVD-Video DVD-RW
DVD-R
CD
Press (PAUSE).
To resume press
(PLAY).
To stop playback
TOP MENU
HD DVD DVD-Video DVD-RW
DVD-R
CD
Press (STOP).
RESUME
PLAY
To resume playback from the location last stopped
PAUSE
HD DVD DVD-Video DVD-RW
DVD-R
/
/
HD DVD
DVD-Video
After stopping playback, press RESUME PLAY (
) or (PLAY) (
DVD-RW
DVD-R
CD
).
If you want to return to the beginning, press (STOP), then press
(PLAY).
Notes
SLOW
STOP
• Pressing
from the location last stopped.
• Resume feature cannot function when:
- you select a disc menu language ( page 35) or change the parental lock setting ( page 37).
- you open the disc tray.
(PLAY) after stopping playback then turning the power off may also resume playback
• There may be a difference in the location where playback resumes depending on the disc.
• It is possible to change the setting from the setup menu while the player retains a location in
memory, however, the new setting can be valid only after the player clears the location memory, i.e.,
starts resume playback.
• Some discs or scenes may not permit this operation.
• While the ADV indicator on the front panel illuminates, this feature is not available.
To change playback speed
HD DVD DVD-Video DVD-RW
DVD-R
CD
Button
Function
Operation
To cancel
Fast reverse playback
Pressing this button repeatedly changes PLAY
the playback speed.
Fast forward playback
Playing in slow-motion
Playing frame by frame
Pressing this button repeatedly changes PLAY
the playback speed.
Pressing this button repeatedly changes PLAY
the playback speed.
SLOW*
**
PLAY
1 Press
to pause playback.
2 Press this button repeatedly.
To skip to the next
chapter/track
To return to the previous Pressing this button once locates the
Press this button once.
–
–
chapter/track
beginning of the current chapter or
track.
Pressing this button twice locates the
beginning of the previous chapter or
track.
TOP MENU To display a top menu
1 Press this button.
TOP MENU
2 Press / / / to select a title.
3 Press OK.
* Not available in CD playback.
**Some discs may not permit this operation.
Note
• If the player freezes for about 15 minutes or more and will not respond to any buttons, holding down ON/STANDBY button on the front
panel for about 10 seconds can force the player to turn off. However, this is an emergency measure, which may cause damage to the
player. Avoid casual use of this measure.
27
HD-EP35KE_Eng.indd 27
07.8.30 7:34:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing (Continued)
To select subtitles
HD DVD DVD-Video
You can display subtitles on the TV and select a subtitle
language from those included on the disc.
During playback, press SUBTITLE.
1
The current subtitle setting appears. (except for some HD
DVD discs)
DISPLAY
AUDIO
e.g.
Subtitle
English 1
Off
SUBTITLE
ANGLE
A language code ( page 36) may appear.
Each time you press , “On” and “Off” alternates.
Select “On” to view subtitles.
/
Press SUBTITLE while the subtitle setting is
displayed on the TV screen.
2
Subtitle languages which do not appear in the setting are
not included in the disc.
CLEAR
Notes
• Some discs are set to display subtitles automatically.
• Depending on the scene, subtitles may not appear immediately
after you set the subtitle function to on.
T.SEARCH
• Some discs will allow you to change subtitle languages and turn
subtitles on or off only via the disc menu.
• When you turn on the player or replace a disc, the player returns
to the initial default setting ( page 35). Depending on a disc, a
specific type of subtitles the disc has is output.
Number buttons
• Depending on the scene, the subtitle language may not change
immediately after selected.
To select the camera angle
HD DVD DVD-Video
To select the sound
HD DVD DVD-Video DVD-RW
DVD-R
CD
If the scene was recorded with multiple angles, you can
easily change the camera angle of the scene you are
watching.
If a disc contains several languages, you can select a
preferred language from them to hear.
While playing a scene recorded with multiple
During playback, press AUDIO.
1
1
angles (angle icon (
) displayed on the TV
The current audio setting appears. (except for some HD
DVD discs)
and the front panel), press ANGLE.
The current angle setting appears. (except for some HD
DVD discs)
e.g.
Audio
English 1
e.g.
Number of angles in the
current title
A language code ( page 36) may appear.
Angle
1 / 6
Press AUDIO while the audio setting is
displayed on the TV screen.
2
Angle number
While the angle number is displayed, press
ANGLE repeatedly to select the angle
number.
2
Notes
• Some discs allow you to change audio selections only via the
disc menu. If this is the case, press MENU button and choose the
appropriate language from the selections on the disc menu.
• When you turn on the player or replace a disc, the player returns
to the initial default setting ( page 35). Depending on a disc, a
specific type of audio the disc has is output.
• Immediately after you have switched audio output modes, there
may be a temporary discrepancy between the display and actual
sound.
Notes
• You can also change the camera angle during still playback.
The camera angle changes to the new setting when you resume
normal playback.
• If you pause a picture immediately after changing a camera angle,
the resumed playback picture may not display the new camera
angle.
28
HD-EP35KE_Eng.indd 28
07.8.30 7:34:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
To locate a position
Press OK.
3
HD DVD DVD-Video DVD-RW
DVD-R
CD
Repeat playback starts.
Notes
Press T.SEARCH repeatedly to select the
category.
1
• Some discs may not permit repeat playback operation.
• You can cancel repeat playback also by pressing (STOP).
Category
Title
To search by specifying:
Title number
Chapter
Time
Track
Chapter number
Elapsed time of the current title (track)
Track number
To check the current status
HD DVD DVD-Video DVD-RW
DVD-R
CD
Press DISPLAY.
1
Press the number buttons to enter a number.
2
The following on-screen display appears.
e.g. To enter 25:
HD DVD DVD-Video DVD-RW
DVD-R
“2”
e.g. To enter 1 hour, 25 minutes, and 30 seconds:
“1” “2” “5” “3” “0”
“5”
Chapter number
Ttle number
e.g.
Elapsed time of a title
Elapsed time of a chapter
Title
002 00:19:13
0003 00:00:28
Pressing CLEAR resets the numbers.
Chapter
Video Codec: MPEG4AVC
Audio: English 1
Video codec
Press OK.
3
Language setting
Subtitle setting
Angle number
Subtitle: None
Playback starts from the specified location.
Angle: 1/1
Video Output: 1080i
Audio Output: Digital Bitstream
Notes
Definition
Sound output setting
• Some discs may not permit these operations.
• While the ADV indicator on the front panel illuminates, these
features are not available.
CD
Track number
Elapsed time of a track
Total time of a track
To play repeatedly
e.g.
CD PLAYER
TRACK 002 00:03:12 / 00:05:16
HD DVD DVD-Video DVD-RW
DVD-R
CD
Press REPEAT.
1
2
The repeat modes are listed.
Press
/
to select the repeat mode.
(The selections on the list vary depending on category or
status of a disc.)
After confirming, press DISPLAY to turn off
the display.
2
Mode
All Repeat
Title Repeat
To repeat:
Entire disc
Current title
Chapter Repeat Current chapter
Track Repeat
Disc Repeat
A-B Repeat
Current track
Entire disc
You can specify a segment to repeat.
Select this and press OK.
A Point
A B Repeat
“
” appears.
Perform steps 1) and 2) below, and skip
step 3.
1) While the above display appears,
press OK at a start point of a segment
where you want to repeat.
The display changes to
B Point
A B Repeat
“
”.
• To cancel the setting, press
RETURN.
2) Press OK at an end point of a
segment where you want to repeat.
Playback returns to the point A and
repeats between A and B.
29
HD-EP35KE_Eng.indd 29
07.8.30 7:34:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing (Continued)
HD DVD playing options in the future
A/B/C/D buttons
HD DVD DVD-Video DVD-RW
DVD-R
CD
Use these buttons as indicated by the video display during HD DVD disc playback.
Depending on the disc contents, the functions of each button may differ.
Cursor controls
HD DVD DVD-Video DVD-RW
DVD-R
CD
Future HD DVD discs may include game software and drawing software. If they do
you can use the cursor function for some software.
1
2
Press CURSOR while a disc with support for cursor use is playing.
Use the eight direction buttons to move the cursor.
Move the cursor to select the game target or selection item. For details on actual
operations, also refer to the operations guide for the disc.
CURSOR
A/B/C/D
Controller port
HD DVD DVD-Video DVD-RW
DVD-R
CD
The extension port may be used in the future for additional control options.
Extension port
Requirements for HD DVD discs/Web-enabled network content
• An always-on broadband internet connection
• An HD DVD disc containing or having the capability of downloading studio-provided, web-enabled network content.
Notes
• To minimize any potential compatibility and/or connectivity issues, before attempting to view any studio-provided web-enabled, network
content, it is recommended that you perform the firmware update process to ensure that you HD DVD player is using the latest firmware
version.
• Toshiba is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions
associated with your broadband internet connection, or other connected equipment.
• Toshiba is not responsible for any trouble in your internet connection.
• If you wish to use a wireless network to connect the player, you will need to use a wireless LAN ethernet adapter to connect the player to
the network.
• The features of HD DVD discs made available through the Internet Connection feature are not created or provided by Toshiba, and Toshiba
is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be
compatible with this player. If you have questions about such content, please contact the producer of the disc.
• Some internet contents may require a higher bandwidth connection.
• Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion,
the quality or bandwidth of your internet service, problems at the provider of the content or compatibility issues.
• Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your
broadband Internet connection.
• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
• A 10 Base-T or 100 Base-TX LAN port is required for connection to this player. If your internet service does not allow for such a connection,
you will not be able to connect the player.
• A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access
method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or
you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player
may not be allowed to connect when a PC is already connected.)
• The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
30
HD-EP35KE_Eng.indd 30
07.8.30 7:34:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Output sound conversion table
“Digital Out SPDIF”
“Digital Out HDMI”
PCM2
ADV
indicator
Disc
Audio format
Bitstream
PCM
Auto
Downmixed PCM
2ch PCM1
HD DVD
Video
Advanced
content
DD Plus/Dolby TrueHD
dts-HD/L-PCM
Dolby Bitstream
DTS Bitstream
2ch PCM
2ch PCM
Depend on HDMI receiver up to 5.1ch PCM3
ADV
DD plus
Bitstream
Dolby Bitstream
2ch PCM
2ch PCM
Depend on HDMI receiver up to 5.1ch PCM2
Depend on HDMI receiver up to 5.1ch PCM
Depend on HDMI receiver up to 5.1ch PCM
2ch PCM
2ch PCM
True HD
48kHz
96kHz
192kHz
Dolby Bitstream
Dolby Bitstream
Bitstream
DTS Bitstream
DTS Bitstream
DTS Bitstream
Bitstream
Bitstream
2ch PCM
2ch PCM1
2ch PCM1
2ch PCM1
2ch PCM
2ch PCM
2ch PCM1
2ch PCM1
2ch PCM
2ch PCM
2ch PCM
2ch PCM1
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM1
2ch PCM1
2ch PCM
2ch PCM
2ch PCM1
2ch PCM1
2ch PCM
2ch PCM
2ch PCM
2ch PCM1
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
2ch PCM
HD DVD
Video
Standard
content
Depend on HDMI receiver
2ch PCM1
Depend on HDMI receiver up to 5.1ch PCM2
Depend on HDMI receiver up to 5.1ch PCM
Depend on HDMI receiver up to 5.1ch PCM3
(off)
dts-HD
L-PCM
48kHz
96kHz
192kHz
Depend on HDMI receiver
Depend on HDMI receiver
2ch PCM3
2ch PCM
MPEG
DD
Depend on HDMI receiver up to 5.1ch PCM
L-PCM
48kHz
96kHz
2ch PCM
2ch PCM
2ch PCM
2ch PCM3
(off)
DVD-Video
dts
Bitstream
Bitstream
2ch PCM
Bitstream
Bitstream
2ch PCM
Bitstream
Depend on HDMI receiver up to 5.1ch PCM
MPEG
L-PCM
dts
Depend on HDMI receiver
2ch PCM
2ch PCM
2ch PCM
44.1kHz
44.1kHz
(off)
(off)
CD
Depend on HDMI receiver up to 5.1ch PCM
DD
L-PCM
MPEG
Depend on HDMI receiver
2ch PCM
Depend on HDMI receiver
2ch PCM
2ch PCM
2ch PCM
DVD-VR
ANALOG AUDIO
OUTPUT 5.1CH
SURROUND
ADV
indicator
Disc
Audio format
HD DVD
Video
Advanced
content
DD Plus/Dolby TrueHD
up to 5.1ch PCM
up to 5.1ch PCM
ADV
dts-HD/L-PCM
DD plus
up to 5.1ch PCM
up to 5.1ch PCM
up to 5.1ch PCM
2ch PCM
up to 5.1ch PCM
up to 5.1ch PCM
up to 5.1ch PCM
2ch PCM
True HD
48kHz
96kHz
192kHz
HD DVD
Video
Standard
content
(off)
dts-HD
L-PCM
48kHz
96kHz
192kHz
MPEG
DD
L-PCM
2ch PCM
up to 5.1ch PCM
2ch PCM
48kHz
96kHz
(off)
DVD-Video
2ch PCM
dts
up to 5.1ch PCM
2ch PCM
2ch PCM
44.1kHz up to 5.1ch PCM
2ch PCM
MPEG
L-PCM
dts
44.1kHz
(off)
(off)
CD
DD
DVD-VR
L-PCM
MPEG
2ch PCM
2ch PCM
1: Downsampled PCM.
2: Up to 5.1 channel PCM audio output is possible only when the connected device supports multi channel output.
3: This output format is possible when the resolution setting is “720p”, “1080i” or “1080p”. When the resolution setting is set to “480p/576p”,
this output format depends on HDMI receiver.
Notes
• The main title content of most movie HD DVD discs is “advanced content”. The player turns on the ADV indicator when an HD DVD disc
which includes such content is loaded.
• The DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack may not output sound you select. In this instance, set “Digital Out SPDIF” to “PCM”.
• The ANALOG AUDIO OUTPUT jacks always output 2ch sound only.
31
HD-EP35KE_Eng.indd 31
07.8.30 11:18:32 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the function settings
You can change the default settings to customize performance to your preference.
During stop, press SETUP.
1
/
“SETUP MENU” appears.
OK
Press
press OK.
/
to select the group that contains a desired item, then
2
Press
/
to select the setting item, then press OK.
To return to the
previous menu
3
4
Refer to the explanations on pages beginning from 33, to change
the selection by or other buttons, then press OK.
/
Repeat step 3 and 4 to set other items if necessary.
5
6
Press SETUP.
“SETUP MENU” disappears and the setting is completed.
SETUP
Group
Setting
Disc
Details
Page
Picture
TV Shape
To select a picture size according to the aspect 33
ratio of your TV.
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
CD
CD
HD DVD DVD-Video DVD-RW
RGB Output
Range
To select the RGB range according to the
capacity of the connected DVI monitor.
33
34
Picture Mode
To select the system of output signal
corresponding to playback source. (Only when
connected to a PROGRESSIVE TV.)
HD DVD DVD-Video DVD-RW
DVD-R
Resolution Setting
Digital Out SPDIF
Digital Out HDMI
To select the resolution of the player’s output,
according to the connected TV.
21
22
22
34
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
HD DVD
DVD-R
DVD-R
DVD-R
CD
CD
CD
Audio
To select the output sound format when
connecting the DIGITAL AUDIO OUTPUT jack.
To select the output sound format when
connecting the HDMI OUTPUT jack.
Digital Direct Audio
Mode
To output high bitrate audio to a connected
amplifier equipped with Dolby Digital Plus, Dolby
TrueHD or DTS-HD decoder.
Dynamic Range
Control
To turn on or off a function that makes faint
sounds easier to hear even if you lower the
volume during late-hour playback.
34
HD DVD DVD-Video DVD-RW
DVD-R
CD
Dialog Enhancement
Speaker Setting
To turn on or off a function that increases dialog 35
volume of a disc playback.
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
CD
CD
To select various parameters for the analog
5.1ch output.
23
Language Disc Menu Language
Subttitle Language
To select a preferred language for disc menus.
To select a preferred language for subtitles.
35
35
35
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
DVD-R
CD
CD
CD
Audio Language
To select a preferred language for the sound
track.
On Screen
Language
To select a preferred language for on-screen
displays.
35
24
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
CD
CD
Ethernet
To set up internet connection feature.
32
HD-EP35KE_Eng.indd 32
07.8.30 7:34:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Group
Setting
Disc
Details
Page
General
Parental Lock
To turn the parental lock function on or off.
37
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
DVD-R
Clock Set
To set the clock of the player.
20
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
CD
CD
OSD On/Off
To activate or deactivate the operational status 38
display on the TV screen.
Remote Controller
Sound
To turn on or off the confirmation beeper
announcing when each remote command is
received.
38
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
CD
CD
38
HDMI Control
Maintenance
To turn on or off the features offered with CEC
(Consumer Electronics Control).
To reset player options to factory defaults or
check for firmware updates.
38
38
HD DVD DVD-Video DVD-RW
HD DVD DVD-Video DVD-RW
DVD-R
DVD-R
CD
CD
Twin Format Disc
To select the layer to play of an HD DVD Twin
Format Disc. (Not available while a disc is
loaded.)
Settings
Picture
Note
• Actual effects of these settings may vary depending on performance of connected device.
TV Shape
16:9
4:3
Select when a 16:9 wide TV is connected.
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen. Both of the picture’s sides are cut off.
4:3 Letter Box
Notes
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above and below the picture.
• When an HD DVD disc or a DVD video disc has a particular available picture shape, the contents may not be compatible with other
picture shapes.
• DVD video discs containing 4:3 picture only always display 4:3 pictures regardless of this setting.
• If “16:9” is selected while connecting a 4:3 TV, playback pictures may be distorted horizontally or shrink vertically. Make this setting
according to your TV shape.
• Actual picture shape may depend on signal types of broadcasts or input sources, or settings on the connected TV. Refer to the
owner’s manual of your TV.
RGB Output Range
Standard
Enhanced
Note
For a monitor of RGB range 16-235.
For a monitor of RGB range 0-255.
• If “Standard” pales black of “Enhanced” blackens too much, change the setting.
(Continued)
33
HD-EP35KE_Eng.indd 33
07.8.30 7:34:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the function settings (Continued)
Picture Mode
There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24
frames per second) and video content (video signals recorded at 25 frames in PAL (30 frames in NTSC) per second). Make this
selection according to the type of content being viewed.
Film
The player converts film content pictures in the progressive output format appropriately. Suitable for
playback of film content pictures.
Video
Auto
Note
The player filters video signal, and converts it in the progressive output format appropriately. Suitable for
playback of video content pictures.
Select this position normally. The player automatically detects source content, film or video, of playback
source, and converts that signal in the progressive output format in an appropriate method.
• The player may not be able to detect the source (film or video) of some material. If you notice undesirable picture performance, try
selecting “Film” or “Video”.
Resolution Setting
See page 21.
Audio
Digital Out SPDIF
See page 22.
Digital Out HDMI
See page 22.
Digital Direct Audio Mode
To output high bitrate audio to a connected amplifier equipped with Dolby Digital Plus, Dolby TrueHD or DTS-HD decoder.
On
High bitrate audio output is enabled. (Sub audio and effect audio are disabled.)
High bitrate audio output is disabled.
Off
Notes
• This selection is available only when the player is connected to an amplifier equipped with Dolby Digital Plus, Dolby TrueHD or DTS
HD decoder.
• To obtain high bitrate audio output, “Digital Out HDMI” ( page 22) needs to be set to “Auto”.
Dynamic Range Control
To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late-hour playback.
Auto
While playing an HD DVD video disc recorded in Dolby TrueHD format, this function will be automatically
activated or disabled according to certain command included in the content. For other discs, this function is
activated.
On
This function is activated.
This function is disabled.
Off
Notes
• This function is effective only in playback of HD DVD or DVD video discs recorded in Dolby Digital, Dolby Digital Plus or Dolby TrueHD
format.
• The effect level of this function vary depending on the disc.
• Not effective in Dolby TrueHD 96 kHz 5.1 channel sound.
34
HD-EP35KE_Eng.indd 34
07.8.30 7:34:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialog Enhancement
To turn on or off a function that increases dialog volume of a disc playback.
On
This function is activated.
This function is disabled.
Off
Notes
• This function is effective only in playback of Dolby Digital recorded HD DVD or DVD video discs.
• The effect level of this function vary depending on the disc.
Speake Setting
See page 23.
Language
Disc Menu Language
To select a preferred language for disc menus.
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish
Other
To make a further language choice.
Refer to “How to select a language” ( page 36).
Note
• Some discs may be played in a different language from that you selected, as the disc may contain alternate language.
Subtitle Language
To select a preferred language for subtitles.
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish
None
Other
To disable subtitles.
To make a further language choice.
Refer to “How to select a language” ( page 36).
Notes
• Some discs may be set to display subtitles in a different language from that you selected, as the disc may contain alternate language.
• Some discs allow you to change subtitle selections only via the disc menu. In this case, press MENU button and choose the
appropriate subtitle language from the selection on the disc menu.
Audio Language
To select a preferred language for the sound track.
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish
Other
To make a further language choice.
Refer to “How to select a language” ( page 36).
Note
• Some discs may be played in a different language from that you selected, as the disc may contain alternate language.
On Screen Language
To select a preferred language for on-screen displays.
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish
35
HD-EP35KE_Eng.indd 35
07.8.30 7:34:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the function settings (Continued)
How to select a language:
e.g.
1) Obtain the code from the list below.
2) Enter the code as below.
3) Select “OK” and press OK button.
/
to
E
N
/
OK
Cancel
change
to shift
Language code list
Code
Language
No alternate
language
Code
DZ
EL
EO
ET
EU
FA
FI
Language
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Code
KS
KU
KY
LA
LN
LO
LT
Language
Kashmiri
Kurdish
Kirghiz
Code
SA
SD
SG
SH
SI
Language
Sanskrit
Sindhi
Code
VI
Language
VIetnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
– – –
VO
WO
XH
YO
ZU
CHI (ZH) Chinese
DUT (NL) Dutch
ENG (EN) English
FRE (FR) French
GER (DE) German
Sango
Latin
Serbo-Croatian
Singhalese
Slovak
Sovenian
Samoan
Shona
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
SK
SL
ITA (IT)
Italian
FJ
LV
MG
MI
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
JPN (JA) Japanese
KOR (KO) Korean
MAY (MS) Malay
SPA (ES) Spanish
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
Somali
Irish
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Scottish Gaelic
Galician
Guarani
Gujarati
Hausa
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Telugu
Tajik
Thai
(Afan) Oromo
Oriya
Panjabi
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Breton
JW
KA
KK
KL
KM
KN
Catalan
Corsican
Czech
Welsh
Danish
Twi
Ukrainian
Urdu
Uzbek
36
HD-EP35KE_Eng.indd 36
07.8.30 7:34:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Ethernet
See page 24.
General
Parental Lock
HD DVD and DVD video discs equipped with the Parental Lock function have a predetermined limitation level. The limitation
level or limitation method may differ depending on the disc. For example the whole contents of a disc may not be played back, or
an extreme violent scene may be cut or replaced automatically by another scene.
Important
• Depending on discs, it may not be evident whether the disc is compatible with Parental Lock function. Make sure that Parental Lock
function you set is activated correctly.
1 Enter a 4-digit password by using the number buttons, then press OK button.
When you use the player for the first time, set a new password of 4-digit. If you make a mistake entering your password, press
CLEAR button before pressing OK button, and re-enter the correct password.
2 Set the details.
a) Select “On” or “Off” by pressing
/
buttons.
On
Parental Lock
Select this to activate Parental Lock
function or to change the setting.
Lock
Area Code Level
to
/
change
Off
G
B
8
OK
Cancel
Off
Deactivates the Parental Lock function.
Skip b) and c) to go to 3.
a)
b)
c)
/
to shift
b) Enter the code of a country/area whose standards were used to rate a disc, referring to the list below.
Country/Area
AUSTRALIA
BELGIUM
CANADA
CHINA
CHINA HONG KONG
DENMARK
FINLAND
Code
AU
BE
CA
CN
HK
DK
FI
Country/Area
INDONESIA
ITALY
Code
ID
IT
Country/Area
SPAIN
SWEDEN
SWITZERLAND
TAIWAN
THAILAND
Code
ES
BE
CH
TW
TH
GB
US
JAPAN
JP
MALAYSIA
NETHERLANDS
NORWAY
MY
NL
NO
PH
UNITED KINGDOM
UNITED STATES
PHILIPPINES
FRANCE
GERMANY
FR
DE
RUSSIAN FEDERATION RU
SINGAPORE SG
c) Select the desired limitation level.
Unless the Parental Lock function is set to “Off”, a disc that has a higher limitation level than your selected limitation level
cannot be played back. For example, if you select level 7, discs exceeding level 8 are locked and cannot be played back.
When “US” is selected, its limitation level corresponds to the following settings.
Level 7: NC-17
Level 6: R
Level 4: PG13
Level 3: PG
Level 1: G
3 Select “OK’ then press OK button.
To change the limitation level of Parental Lock function
Follow steps 1 - 3 above.
To change the password
1 At step 1, press STOP button 4 times then press OK button.
The password is cleared.
2 Enter a new 4-digit password by using the number buttons.
3 Press OK button.
37
HD-EP35KE_Eng.indd 37
07.8.30 7:34:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the function settings (Continued)
Clock Set
See page 20.
OSD On/Off
To activate or deactivate the operational status display on the TV screen.
On
Off
Activates the operational status display (e.g., ) on the TV screen.
Deactivates the operational status display (e.g., ) on the TV screen.
Remote Controller Sound
To turn on or off the confirmation beeper announcing when each remote command is received.
On
Off
Turns on the beep sound.
Turns off the beep sound.
HDMI Control (REGZA-Link)
To turn on or off the features offered with CEC (Consumer Electronics Control) when an HDMI device is connected to this player.
Use of HDMI Control which is a feature based on HDMI-CEC requires an HDMI-CEC compatible display device.
Enable HDMI
control
Select “On” to control this player using the remote control of your TV.
To disable this function, select “Off”.
OneTouchPlay
(Only when “Enable HDMI control” is set to “On”)
Select “On” to turn the connected TV on if it is off and set its input to the player automatically to display the
player’s picture, by pressing one of (PLAY), MENU, RESUME PLAY, TOP MENU buttons.
To disable this function, select “Off”.
SystemStandby
(Only when “Enable HDMI control” is set to “On”)
Select “On” to turn off both the player and the connected TV from the TV’s remote control.
To disable this function, select “Off”.
When complete, select “OK” then press OK button.
Notes
• Depending on the specifications of your TV, this function does not work even when your TV is HDMI-compatible.
• All the above features may not always work on all compatible TVs.
Maintenance
Initialize
To reset all the settings listed on page 30, 31 to factory set default.
Press buttons to select “Yes” then press OK button.
/
Update (Firmware If you have a broadband internet service, you may obtain firmware update over the internet using the LAN
port on the back of your player.
update)
• BEFORE BEGINNING THE FIRMWARE UPDATE PROCESS, BE SURE TO REMOVE ANY DISCS
FROM YOUR PLAYER.
Please configure the LAN port ( page 17). You may need to turn on DHCP and DNS ( page 24).
• Press SETUP and select “General” > “Maintenance”. Follow the instructions on the screen.
• If a firmware update is available for your player, the player will download it. Once the firmware update
dowload process has finished, the player’s power will automatically switch off. You must wait until this
process has finished.
• DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE
FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player
to be halted and the player may no longer operate properly. If the player stops working, please contact
• If no fimware update is available, the player will quickly exit the firmware update process.
Persistent Storage To open the menu to control player’s memory allocated for content. (Not available while a disc is loaded.)
The menu selections will vary depending on the content. Operate following the instructions displayed on
your screen.
Twin Format Disc
To select a layer to play, HD DVD or DVD of an HD DVD Twin Format Disc. (Not available if a disc is loaded.)
HD DVD
DVD
Only the HD DVD layer is played.
Only the DVD layer is played.
Note
• For combination discs, select the desired version by disc side (see label for information).
38
HD-EP35KE_Eng.indd 38
07.8.30 11:19:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before calling service personnel
Before accessing, try updating this player’s firmware. For details on how to update, see “Update (Firmware
update)” ( page 38).
If you experience any of the following difficulties while using this unit, check the list below before consulting
your nearest Toshiba dealer.
Symptom
No power.
No picture.
Remedy
Page
17
• Is the power plug disconnected? Check the power connection.
• Is the cable for connecting the player and TV disconnected or not connected properly?
Check the connections.
15
• Switch the input of the connected TV to the signal from the player.
–
• Are both the HDMI OUTPUT jack and the COMPONENT VIDEO OUTPUT jacks
connected simultaneously? Select either connection and make the appropriate setting.
15
• In case the menu of “Resolution Setting” disappears, make composite video (yellow)
21
connection to restore it, then select the resolution which is compatible with the connected
TV.
No sound.
• Is the audio cable disconnected?
14, 16
• Is the volume of the device turned down to the minimum level? Check the volume.
–
–
• Switch the audio input of the device connected by the audio cable to the input from the
player.
• Set “Digital Out SPDIF” or “Digital Out HDMI” properly in accordance with the connected 22
device and connection procedure.
• Change the output resolution so that sound can be heard.
21
• If using the optical digital output for a Dolby Digital Plus, Dolby TrueHD, DTS-HD or DTS 22
soundtrack, be sure your AV receiver or processor is set to use the input connected to
your player and is set to decode a DTS bitstream. If your AV receiver or processor does
not support DTS, select PCM output on the player.
Sounds of sub pictures such
as commentaries and/or
accessory sounds in menu
operation cannot be heard.
• “Digital Direct Audio Mode” > “On” is selected. To obtain these sounds, select “Off”.
34
The disc does not play.
• Make sure the disc type can be played with the player.
• Is the disc dirty or scratched? Check or clean the disc.
8
8
–
• If the disc is a DVD-RW or DVD-R disc, finalize the disc before attempting to play it with
the player.
• If the disc includes parent lock support, playback is restricted while the parent lock of the 37
player is set. Cancel Parental Lock or change the restriction level.
Playback picture has noise.
• If video from the player is watched via a video recorder or on a TV with a built-in video
recorder, the copy guard may prevent images from being displayed properly. Be sure to
connect the player directly to the TV.
15
Playback picture does not
move smoothly.
• “Resolution Setting” > “up to 1080p/24Hz” is selected. Change the setting.
• Are the batteries of the remote control dead? Replace the batteries.
• Make sure the remote control is within range and pointed in the correct direction.
21
12
The remote control does not
work.
12
38
HDMI Control (REGZA-Link)
does not work.
• Make sure the HDMI calbe is firmly connected, then turn on both the TV and the player
again.
Screen freezes and no
buttons work.
• Pressing ON/STANDBY button on the player for approximately ten seconds forces the
player to turn off. Turn the player off and then on again.
–
After powering on, “Clock Set” • The power supply to the player may have been disconnected. Reset the clock.
menu appears.
20
39
HD-EP35KE_Eng.indd 39
07.8.30 7:34:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Power requirement
Analog audio output
36.0W
2.0V (rms), 2.2kΩ or below, pin jack
(L, R) x 1 system
2.0V (rms), 2.2kΩ or below, pin jack x 6
Power supply
220 - 240V AC 50/60Hz
Digital audio output (BITSTREAM/PCM jack)
Optical connector x 1 system
Mass
3.3kg
LAN port
100BASE-TX/10BASE-T x 1
External dimension
Width 430 x Height 59.5 x Depth 327mm
Extension port
1 system
Signal system
Standard PAL/NTSC colour system
HDMI output
19 pin, Type A connector
Laser
Semiconductor laser
Wavelength: 405nm/650nm/780nm
Remote control
Wireless remote control (SE-R0252-WEEE)
VIDEO output
1.0Vp-p (75Ω), Sync signal negative,
Pin jack x 1 system
Operating conditions
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Position: Horizontal
Component output (Y, PB, PR)
Y output (green), 1.0Vp-p (75Ω),
Pin jack x 1 system
Clock accuracy
Quartz (monthly deviation: approximately 30 seconds)
PB, PR output (blue, red), 0.7Vp-p (75Ω),
Pin jack x 1 system each
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
• The illustrations and screens described in this manual may be exaggerated or simplified for easy recognition and may be slightly
different from the actual unit.
INFORMATION ON CUSTOMER SUPPORT
HD DVD is a new and evolving format, so changes and improvements are possible. To obtain updated information about
HD DVD and this product, as well as customer support information about this product, please contact Toshiba customer
©2007 TOSHIBA CORPORATION
Printed in China
.
Printed on 70% Recycled Paper
GX1D00001780
HD-EP35KE_Eng.indd 40
07.8.30 7:34:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|