Introduction
Connections
2
11
16
19
30
37
DIGITAL VIDEO
DVD PLAYER
Basic playback
Advanced playback
Function setup
Others
SD900KY
OWNER’S MANUAL
© 2009Toshiba Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Read all warnings.
4. Follow all instructions.
5. Do not use this appliance near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Portable Cart Warning
12. Unplug this apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
ADDITIONALSAFETYINSTRUCTIONS
14. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire
or electric shock.
15. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled
with liquid, or candles on top of the unit.
16. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
17. Do not place anything on top of this unit.
18. Do not place the apparatus on amplifiers or equipment that may produce heat.
19. Never block or cover the slots or openings in the unit.
Never place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.
20. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal
injury and apparatus malfunction.
21. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet.
Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
22. During thunderstorms, do not touch the connecting cables or the apparatus.
23. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
Notes on handling
Notes on moisture condensation
When shipping the DVD player, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was originally
packed at the factory. Take care not to give it a shock
or shake when carrying.
Do not use volatile liquids, such as insect spray, near
the DVD player.Do not leave rubber or plastic products
in contact with the DVD player for a long time.They will
leave marks on the finish.
Moisture condensation damages the DVD player. Please
read the following carefully.
Moisture condensation occurs, for example, when you pour
a cold drink into a glass on a warm day. Drops of water
form on the outside of the glass. In the same way, moisture
may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
The top and rear panels of the DVD player may become
warm after a long period of use. This is not a
malfunction.
When the DVD player is not in use, be sure to remove
the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Moisture condensation occurs during the following
cases.
Notes on locating
When you bring the DVD player directly from a cold
place to a warm place.
Place the DVD player on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc may come off
the proper position and cause damage to the DVD
player.
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD
player away from the TV, radio, or VCR.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it
dry.
Do not use any type of solvent, such as thinners and
benzene, as they may damage the surface of the DVD
player.
Do not use the DVD player when moisture condensation
may occur.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player, and leave it for two or
three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture.Keep
the DVD player connected to the wall outlet and
moisture condensation will seldom occur.
Inspection and Maintenance
This DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts become dirty
or worn down, the picture quality may be reduced. To
avoid reduction in picture quality, it is recommended that
regular inspection and maintenance (cleaning or parts
replacement) be performed every 1,000 hours of use. For
further details, contact your nearest consumer electronics
dealer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVDs are divided into titles, and the titles are
sub-divided into chapters.VIDEO CDs and audio CDs are
divided into tracks.
DVD
DVD
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Playback side
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 2 Track 3 Track 4
Track 1
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
Each title, chapter or track is assigned a number, which is
called “title number”, “chapter number” or “track number”
respectively.
There may be discs that do not have these numbers.
Notes on copyright
The unauthorized recording, use, distribution, or revision of
copyrighted materials including, without limitation, television
programs, videotapes, and DVDs, is prohibited under the
Copyright Laws of the United States and other countries,
and may subject you to civil and criminal liability.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for
vinyl LPs. It may damage the disc.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners.Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes on Discs (continued)
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions of this
DVD player. Some DVDs are produced in a manner that
allows specific or limited operation during playback. As
such, the DVD player may not respond to all operating
commands. This is not a defect in the DVD player. Refer
to instruction notes of discs.
This DVD player can play the following discs.
Maximum
playback time
Disc
Size
Disc Mark
Contents
Approx. 4 hours
(single sided disc)
12 cm
Approx. 8 hours
Audio
+
video
(moving
pictures)
(double sided disc)
“
” may appear on the TV screen during operation.
” means that the operation is not permitted by the
DVDs
Approx. 80 minutes
(single sided disc)
A “
DVD player or the disc.
8 cm
Approx. 160 minutes
(double sided disc)
About
The
icons on the heading bar show the playable
discs for the function described under that heading.
Approx. 74 minutes
Approx. 20 minutes
12 cm
Audio
+
video
(moving
pictures)
: You can use this function with DVD video discs.
DVD
VIDEO
CDs
: You can use this function with Video CDs.
: You can use this function with Audio CDs/CD-R/RW
CD
DIGITAL VIDEO
8 cm
CDs.
Approx. 74 minutes
Approx. 20 minutes
12 cm
Notes on region numbers
Audio
CDs
Audio
8 cm
(CD
single)
The region number of this DVD player is 4. If region
numbers, which stand for their playable area, are printed
Audio
+
video
(moving
pictures)
on your DVD and you do not find
4
or
, disc
35 min.
10 min.
12 cm
8 cm
SUPER
VIDEO
CDs
playback will not be allowed by the player. (In this case,
the DVD player will display a message on-screen).
SUPER VIDEO
Audio
+
On VIDEO CDs
12 cm
8 cm
It depends on DivX®
quality
DivX®
video
(moving
pictures)
This DVD player supports VIDEO CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback variations
depending on types of discs.
The following discs are also available.
DVD±R/±RW and DVD-ROM discs of DVD format
CD-R/CD-RW discs of CD-DA,Video CD, MP3 or JPEG
format
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD player in
the same way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s manual
may not work with some discs.
Official DivX® Certified product
Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or non-standardized discs,
etc., even if they may be labeled as above.
• This DVD player uses the NTSC/PAL colour system, and
cannot play DVDs recorded in any other colour system
(SECAM, etc.).
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture of
DVD and CD discs,Toshiba cannot assure that this DVD player
will successfully play every disc bearing the DVD and CD logos.
If you happen to experience any difficulty playing a DVD and/
or CD disc on this DVD player, please contactToshiba Customer
Service.
is a trademark of DVD Format/Logo Licensing Corporation.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
Advanced playback
SAFETY PRECAUTIONS ........................... 2
IMPORTANT SAFETY INSTRUCTIONS .... 3
Precautions ............................................... 4
Accessing a Specific Location Directly ........... 19
Locating a specific title/chapter/time ................... 19
Repeating a Specific Segment................. 20
Repeating a specific segment ............................ 20
Notes on Discs .......................................... 5
Notes on region numbers ................................... 6
Playing in a Varied Order......................... 20
Playing titles, chapters or tracks in a varied order .. 20
Table of Contents...................................... 7
Playing in a Favourite Order .................... 21
Setting titles, chapters or tracks in a favourite order .. 21
Identification of Controls ......................... 8
Front panel .......................................................... 8
Rear panel .......................................................... 8
DVD display ........................................................ 8
Remote control .................................................... 9
Loading batteries ............................................... 10
Operating with the remote control ...................... 10
Zooming a Picture .................................... 22
Zooming a picture............................................... 22
Selecting the Sound Enhancement (E.A.M.) .... 22
Selecting the sound enhancement...................... 22
Selecting the Picture Enhancement (E.P.M.) .... 23
Selecting the picture enhancement..................... 23
Connections
Connecting to a TV ................................. 11
Connecting to a TV (Using the phono type jacks)11
Connecting to a display (Using a HDMITM cable) 12
Selecting Subtitles ................................... 23
Selecting a subtitle language .............................. 23
Selecting the Camera Angle .................... 24
Changing the camera angle ................................ 24
Connecting to Optional Equipment ....... 13
Selecting a Language ............................... 24
Selecting a playback audio setting ..................... 24
Connecting to an amplifier equipped with a
Dolby® Digital decoder ......................................... 14
On-screen Display Operation .................. 25
On-screen display operation .............................. 25
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ................................ 14
Connecting to an amplifier equipped with a
DTS® decoder .................................................. 15
Connecting to an amplifier equipped with an MPEG2
audio decoder .................................................. 15
Playing MP3 Files ..................................... 26
Playing MP3 files................................................ 26
Viewing JPEG Files .................................. 27
Viewing JPEG files ............................................ 27
Viewing a thumbnail view ................................... 27
Connecting to an amplifier equipped with a
digital audio input .............................................. 15
Playing DivX®/MPEG-4 Files .................... 28
Playing DivX®/MPEG-4 files ............................... 28
Basic playback
Playing USB Device .................................. 29
Playing a Disc ......................................... 16
Connecting to USB flash drive ........................... 29
Basic playback ................................................ 16
Variable Speed Playback ........................ 17
Playing in fast reverse or fast forward directions .. 17
Playing frame by frame .................................... 17
Playing in slow-motion...................................... 17
Resuming playback from the same location ..... 17
Function setup
Customizing the Function Settings ........ 30
Setting procedure ............................................... 30
Setting details..................................................... 30
Locating a Desired Section .................... 18
Locating a title using the top menu..................... 18
Locating a specific chapter or track .................. 18
Others
Table of Languages................................... 37
Before Calling Service Personnel ........... 38
Specifications ........................................... 39
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls
See the page in
for details.
Front panel
16
16
10
USB jack
HDMI SELECT
8
29
12
16
16
HDMI indicator
12
16
Rear panel
HDMI OUT
Power Cord
11
12
jack
VI
HDMI OUT
HDMI OUT
11
14
15
DVD display
The indicators vary depending on the kinds of discs you play.
Bad disc
Bad disc
No disc
OPEN
LOAD/CLOSE
Power off
Chapter/Track
number Indicator
DVD VIDEO
VIDEO CD
Audio CD
Picture
• During playback:
Example
• During playback:
Example
• During playback:
Example
• During thumbnail
viewing
Multifunctional indicator
(indicates operating
status or messages, etc.)
Some discs may only
display chapter numbers.
Some discs may only
display track numbers.
Some discs may only
display track numbers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
16
16
19
19
22
23
17
23
24
24
16
17
16
18
17
18
17
18
18
25
16
25
18
20
19
16
16
20
21
30
22
USB
DVD
HDMI button 12
USB button
DVD button
29
29
* RETURN button
Return to menu display forVCD (2.0) discs with menu.
* MENU button
Use the MENU button to display the menu included on
many DVDs. To operate a menu, follow the instructions
in “Locating a title using the top menu.”
18
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls (continued)
Loading batteries
Operating with the remote control
Open the cover.
Point the remote control at the remote
sensor and press the buttons.
1
Insert batteries (R03/AAA size).
2
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD player
to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able
to operate the DVD player via the remote control.
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
player.
Caution
Never throw batteries into a fire.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
Notes
• Be sure to use R03/AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment
in mind. Always dispose of batteries in accordance with
applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries with
new ones.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix battery
types or use new and used batteries in combination.
• Always remove batteries from remote control if they are dead
or if the remote control is not to be used for an extended
period of time.This will prevent battery acid from leaking into
the battery compartment.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
Connect the DVD player to your TV.
Connecting to aTV (Using the phono type jacks)
V
Normal TV
HDMI OUT
To VIDEO
OUT
To 2ch AUDIO OUT
(R: red, L:white)
(yellow)
To audio
input
To video
input
(yellow)
• Make the following setting.
On-screen display Select:
Page
Audio/Video cables (supplied)
“Off”,
“Digital Output”
34
“PCM” or
“Bitstream”
Composite
“Video Out”
33
HDMI
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video
selector, the playback picture may be distorted as DVDs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
About HDMI
HDMI has the capability to support standard, enhanced, or
high-definition video plus standard to multi-channel surround-
sound audio. HDMI features included uncompressed digital
video, a bandwidth of up to 2.2 gigabytes per second (with HDTV
signals), one connector (instead of several cables and connectors),
and communication between the AV source and AV devices such
as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI licensing
LLC.
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in
one specification. HDCP is used to protect digital content
transmitted and received by DVI-compliant or HDMI-compliant
displays.
Connecting to a display (Using a HDMITM cable)
V
HDMI OUT
To HDMI
Output
HDMI Cable
(not supplied)
Available output signals are below:
•
•
•
•
•
Auto
HDMI-compatible display
576p/480p (progressive)
720p (progressive)
1080i (interlaced)
1080p (progressive)
• Make the following setting.
Switching the video quality (HDMI mode) using the
HDMI button on the remote control or the HDMI
SELECT button on the front panel.
Press HDMI button on the remote control or HDMI SELECT
button on the front panel to receive a suitable video quality in
STOP mode. The video quality is required to match your TV
having HDMI feature and suitable quality. Please also check
yourTV owner’s manual.
On-screen display
“Digital Output”
Page
Select:
“PCM”
34
“Video Out”
HDMI
33
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to yourTV, be sure to turn off
the power and unplug both units from the wall outlet before making
any connections.
• If you have a HDMI (with HDCP) equipped monitor or display,
you can connect it to this player using a HDMI cable.
• The HDMI connector outputs uncompressed digital video, as
well as almost every kind of digital audio that the player is
compatible with, including DVD-Video, Video CD/Super VCD,
CD, MP3 and DivX®.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) depending on the component
you have connected. Using a HDMI connection may result in
unreliable signal transfers.
• Because HDMI is an evolving technology, it is possible that
some devices with an HDMI input may not operate properly
with this DVD player.
Press this button to change the output signals as below. See
the HDMI indicator and select the appropriate output signal.
HDMI indicator
Video output signal
1080p (progressive)
illuminates “ • 1080p”
Press
illuminates “ • 1080i”
1080i (interlaced)
720p (progressive)
Press
illuminates “ • 720p”
Press
illuminates “ • 576p/480p”
Press
576p/480p (progressive)
illuminates “ • 576p/480p,
• 720p, • 1080i and • 1080p”
Auto
• When using HDMI cable, do not connect to other analogue video
outputs.
Press
• No sound will be output from the HDMI cable if the digital out
is not set to PCM.
• HDMI output is only available when the Video Out is set to
“HDMI”. Otherwise the HDMI button is invalid.
576p/480p, 720p, 1080i and 1080p are signals created with
this DVD Player from original 576i/480i signal.The resolution
of the picture may not be increased even if they are selected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Content of the output for each output jack is shown in the following table and differ depending on the On-Screen
Display Setting:
HD JPEG Mode: Off
Content of output for
each output jack
HD JPEG Mode: On
Content of output for each
output jack during JPEG playback
On-Screen Display Setting
"Video Out" HDMI Output
HDMI
Output
-
Video
HDMI
Output
-
Video
Setting
Setting *
Invalid
480/576p
720p
Output
Output
Composite
Composite
Composite
Composite
Composite
Composite
Composite
480p/576p
720p
480p/576p
720p
Composite
-
-
-
HDMI
1080i
1080i
1080i
1080p
1080p
1080p
* Settings for HDMI output format are performed using the HDMI button on the remote control or HDMI SELECT button
on the front panel.
Notes
•
Composite (Video) will not have JPEG pictures output when HD JPEG Mode is on
resolution mode. You may view photos (JPEG ) through HDMI connection.
, except 480p/576p video
32
• If Auto is selected, it follows preference HDMI aspect ratio of TV.
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
• For connection to yourTV, see “Connecting to aTV”.
• This section uses the following reference marks.
Warning
• When you are connecting (via the COAXIAL DIGITAL
AUDIO OUT jack) an AV decoder that does not have Dolby
Digital, DigitalTheater Systems (DTS) or MPEG2 decoding
function, be sure to set “Digital Output” to “PCM” from the
on-screen displays. Otherwise, high volume sound may
damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVDs and audio CDs),
excessive noise may be output from the analog audio output
jacks. To avoid possible damage to the audio system, you
should take proper precautions when the analog audio output
jacks of the DVD player are connected to an amplification
system. To enjoy DTS Digital Surround™ playback, an
external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the COAXIAL DIGITAL
AUDIO OUT jack of the DVD player.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Notes
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the DVD player.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the“DIGITAL (COAXIAL)”input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a Dolby® Digital decoder
Dolby Digital
Manufactured under license from Dolby
Dolby Digital is the surround sound technology used in theaters showing the latest
movies, and is now available to reproduce this realistic effect in the home.You can
enjoy motion picture and live concert DVDs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital
decoder or Dolby Digital processor.If you have a Dolby Surround Pro Logic decoder,
you will obtain the full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
• Use DVDs encoded via the Dolby
Digital recording system.
• Make the following setting.
On-screen display
“Digital Output”
Select:
Page
VIDEO
L
Amplifier equipped with a
Dolby Digital decoder
“PCM” or
“Bitstream”
34
OXIIIA
To COAXIAL
type digital
audio input
To COAXIAL
DIGITAL
AUDIO OUT
To wall
outlet
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
• Make the following setting.
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting
an amplifier and speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
On-screen display
Select:
Page
“PCM” or
“Bitstream”
“Digital Output”
34
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby® Digital decoder.” Refer to that amplifier’s owner’s manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear speakers will
be monaural even if you connect two rear
speakers.
VI
Amplifier equipped with
Dolby Surround Pro Logic
II
L
To audio
input
To ANALOG
AUDIO OUT
To wall
outlet
Audio cable (not supplied)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier equipped with a DTS® decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVDs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVDs or audio CDs.
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS
and DTS Digital Out are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. ©
1996-2008 DTS, Inc. All Rights Reserved.
Amplifier equipped with a
DTS decoder
L
VIDEO
I
AL
• Use DVDs or audio CDs encoded
via the DTS recording system.
• Make the following setting.
To COAXIAL
type digital
audio input
To COAXIAL
DIGITAL
AUDIO OUT
To wall
outlet
On-screen display
“Digital Output”
Select:
Page
34
“Bitstream”
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVDs with dynamic realistic sound
by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2
audio processor.
• Use DVDs encoded via the MPEG2
recording system.
• Make the following setting.
On-screen display
“Digital Output”
Select:
Page
Amplifier equipped with an
MEPG2 audio decoder
“PCM” or
“Bitstream”
34
III
To COAXIAL
type digital
audio input
To COAXIAL
DIGITAL
AUDIO OUT
To wall
outlet
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
• Make the following setting.
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left front
speakers).
On-screen display
Select:
Page
34
“Digital Output”
“PCM”
VDEO
L
Amplifier equipped with
a digital audio input
I
To COAXIAL
type digital
audio input
To COAXIAL
DIGITAL
AUDIO OUT
To wall
outlet
75 Ω coaxial cable (not supplied)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
CAUTION
Playing a Disc
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
This section shows you the basics on how to play a disc.
Basic playback
Preparations
To obtain a higher quality picture
• When you want to view a disc, turn on the TV and select the
video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input connected
to the DVD player.
Occasionally, some picture noise not usually visible during
a normal broadcast may appear on the TV screen while
playing a DVD because the high resolution pictures on these
discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on yourTV when
viewing DVDs.
Press the ON/STANDBY button on the
front panel or the POWER button on the
1
To start playback in the stop mode
Press PLAY.
remote control.
POWER
The DVD player turns on.
Press OPEN/CLOSE.
2
To pause playback (still mode)
Press PAUSE/STEP during playback.
The disc tray opens.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
Place the disc on the disc tray.
3
To stop playback
Press STOP.
With the playback side
down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the DVD
player to malfunction.
• Do not place a disc which is unplayable in this DVD
player.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
Press OPEN/CLOSE to close the disc tray.
4
Playback starts.
To turn the power off
Press ON/STANDBY on the front panel or POWER
button on the remote control to turn the unit off.
If you insert a DVD that contains a top menu, a
menu may appear. Use
/
/
/
to select the
title you want to view, then press ENTER to start
playback.
Automatic Power Off function
If the DVD player is stopped, or the screen saver is engaged
for approximately 20 minutes, the DVD player will
automatically turn itself off.
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD.)
Notes
• Do not move the DVD player during playback.Doing so may damage
the disc.
Notes
• If the disc tray is holding a disc you have already played,
• Use the OPEN/CLOSE button to open and close the disc tray.
Do not push the disc tray while it is moving. Doing so may cause
the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than
discs on the disc tray. Doing so may cause the DVD player to
malfunction.
• In many instances, a menu screen will appear after playback of
a movie is completed. Prolonged display of an on-screen menu may
damage your television set, permanently etching that image onto its
screen. To avoid this, be sure to press the STOP button on your
remote control once the movie is completed.
playback will begin from the location where you last stopped.
17
For resuming playback, see
.
• Some video CD are recorded with PBC (Playback Control), a menu
with recorded contents may appear on the TV if you have turned
the PBC on. You can make your selection according to its PBC
menu. Press the PBC button on the remote control to turn PBC on
or off anytime during Video CD playback. When switching from
PBC off to PBC on mode, playback will start from the beginning of
the disc. To turn on the menu display again, press the RETURN
button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Variable Speed Playback
You can play discs at various speeds, and resume playback from the location where you stopped playback.
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
Press REV or FWD during playback.
REV: Fast reverse playback
FWD: Fast forward playback
Notes
Each time you press the REV or FWD
button, the playback speed changes.
• The DVD player mutes sound and subtitles during reverse
and forward scan of DVDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
To resume normal playback
Press PLAY.
Press PAUSE/STEP during still playback.
Each time you press the PAUSE/STEP
button, the picture advances one
frame.
Note: The sound is muted during frame by frame playback.
Playing in slow-motion
To resume normal playback
Press PLAY.
Press SLOW during playback.
Each time you press the SLOW
button, the slow-motion speed
changes in the following sequence:
Notes
• The sound is muted during slow-motion playback.
• 3 speeds are available.
Resuming playback from the same location
Notes
Press STOP at the location where you
want to interrupt playback.
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while
the DVD player keeps a location in the memory may function
only after the memory is cleared.
1
2
The DVD player memorizes the
location where playback is stopped.
• Resuming playback does not work for VCD with PBC on.
Press PLAY.
The DVD player resumes playback
from the location where you stopped
playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
To start playback from the beginning regardless of the location where you stopped playback.
1
Press STOP twice.
•
If you want to return to the
beginning of a DVD, open
and close the disc tray once
with the OPEN/CLOSE
button before pressing the
PLAY button.
The DVD player deletes the memory of the location.
2
Press PLAY.
Playback starts from the beginning of the current title.
Playback starts from the beginning of the disc.
Playback starts from the beginning of the current track.
Locating a Desired Section
Normally, DVDs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into
tracks.You can quickly locate any specific title, chapter, or track.
Locating a title using the top menu
PressTOP MENU.
Press ENTER.
1
2
3
The top menu appears on the TV
screen.
Playback starts from chapter 1 of the
selected title.
e.g.
Notes
• The instructions above describe basic procedures which may
vary depending on the contents of the DVD. If different
instructions appear on theTV screen, follow those instructions.
• If you display the top menu during playback and press the TOP
MENU button again without selecting any title, the DVD player
may resume playback from the point where you first pressed
theTOP MENU button (depending on the actual DVD.)
• This method of locating a title is available only on a disc that
contains a top menu.
Press
want.
/
/
/
to select the title you
If the titles in the top menu are assigned
a number, you can directly locate a
specific title by pressing its designated
number with the number buttons.
• Instruction notes of discs may refer to the button that displays
the top menu as TITLE button.
Locating a specific chapter or track
Note
Press SKIP
the chapter or track number you want.
or
repeatedly to access
Some titles may not display chapter numbers.
Playback starts from the selected chapter or track.
To locate succeeding chapters or tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick
successions, playback starts from the
beginning of the preceding chapter or track.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing a Specific Location Directly
Locating a specific title/chapter/time
Accessing chapters/tracks using number
buttons:
PressT.
1Press
SEARCH
For chapter/track numbers 10 to 19, press +10 once
and the number 10 appears then enter the second digit.
Press ENTER.
For chapter/track numbers 20 to 29, press +10 twice
and the number 20 appears then enter the second digit.
Press ENTER.
/
to highlight the Title/Chapter/
Track/Time.
e.g.
T
1
For example, if you want to select chapter/track 25, first
press +10 twice then press the number button “5”.Then
press ENTER.
00 : 00 : 00
Track
2
Accessing the time using number buttons:
Just enter 2 digits in order.
Time
00 : 00 : 00
Disc Time
The first two numbers you entered represent hours.
The second two numbers you entered represent
minutes.
The third two numbers you entered represent seconds.
Press
/
to select a section you want to
locate.
2
To set and play favourite bookmark during playback
1.PressT twice, the display of Bookmark appears, then
press ENTER to mark the desired scene.
SEARCH
e.g. When you want to locate a chapter.
T
1
Bookmark
00 : 00 : 00
Or
Press the number buttons to enter title,
chapter (track) number or time.
2. Press ENTER to play the favourite bookmark.
To set other bookmarks.
Follow step 1 and move through the menu by pressing
the or button.
Press T again to remove this display.
Press ENTER.
3
To cancel the Bookmark
Playback starts from the selected
section.
Follow step 1, then press the CLEAR button to cancel the
bookmark. Move through the menu by pressing the or
button to cancel other bookmarks.
Notes
• Some discs may not work with marking operation.
• The marking is cancelled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
Notes
• Pressing the CLEAR button resets the numbers. To clear
the display, press the T button several times.
• For VCD with PBC on, accessing tracks using number
buttons does not work.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Repeating a Specific Segment
You can specify a desired segment and repeat it.
Repeating a specific segment
To resume normal playback
Press A-B RPT until RepAB Off is displayed.
Press A-B RPT at the beginning of the
segment (point A) you want to play
1
A-B RPT
repeatedly.
A-B RPT
RepAB Off
Rep A-
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles.
• You can specify a segment only within the current title or track
(VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
Press A-B RPT again at the end of the
segment (point B).
2
A-B RPT
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
Rep A-B
Playing in a Varied Order
You can play titles, chapters within a title, or tracks in a varied order.
For Audio CD, please see “Playing MP3 files”
.
26
Playing titles, chapters or tracks in a varied order
Press PLAY MODE.
Press PLAY.
1
2
PLAY MODE
Press
/
button to select desired
Press the PLAY button, the DVD
player starts playback in the selected
mode.
features and then press ENTER button
to toggle desired mode.
e.g.
Play Mode
Mode
Normal
: Off
Repeat
To resume normal playback
Press ENTER until the Off/Normal is displayed.
Normal
Shuffle
Chapter
Title
Single
PBC
(VCD only)
Note
Some discs may not permit these operations.
Shuffle: Playbacks in random order.
PBC: Playbacks in PBC On mode (VCD only).
Chapter: Repeats the current chapter.
Title: Repeats the current title.
Single: Repeats the current track.
All:
Off:
Repeats the entire disc.
Resumes normal playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in a Favourite Order
You can combine your favourite titles, chapters, or tracks and play them in the order you determine.You can program up to
12 selections into the memory. (Memory playback)
Setting titles, chapters or tracks in a favourite order
To change the programmed selections
1. While the display appears on the TV screen, press
Insert a disc and press MEMORY during
stop.
1
/
/
/
to move the highlighted bar to the item
The following display appears.
e.g. DVD
you want to change, then press CLEAR.
2. Press number buttons to input the new title/chapter/
track number.
MEMORY
Memory
To cancel the programmed selections
Title Chapter
1. While the display appears on the TV screen, press
Play
/
/
/
to move the highlighted bar to the item
you want to cancel.
2. Press CLEAR.
All
Chapter number
Title number
To resume normal playback from memory
playback
Press MEMORY button.
e.g. VCD
Press
/
/
/
to move the highlighted bar to “Clear
All”, then press ENTER. All the input programs will be
cleared.
Memory
Press PLAY button to resume normal playback.
Play
All
DVD: Normal playback will start from current
playback.
Track number
VCD: Normal playback will start from the
beginning of the disc.
Select the items in the order you want by
pressing the number buttons.
To program during playback
If you press the MEMORY button during playback, a
programming display appears.
2
3
Each time you press the
/
/
/
button, the
space is highlighted in turn.Highlight where you want
to enter, then press the corresponding number
buttons.
Follow steps 2 and 3.
Notes
To select another chapter in the same title, you need
to select the title number.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player
repeats the current memory playback.
• If you press the MEMORY button while the display appears
on the TV screen, the display disappears.
To select tracks from aVIDEO CD/audio CD in order,
press the number buttons for the track.
• The programmed selections will be cleared when you open
the disc tray or turn off the DVD player.
Press
/
/
/
to move the highlighted
bar to Play, then press the ENTER.
The DVD player starts memory
playback.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
Zooming a picture
To resume normal playback
Press ZOOM during normal, slow or still
playback.
Off
Press ZOOM repeatedly until the
Original picture is restored.
is displayed.
The centre part of the image will be
ZOOM
ZOOM
zoomed in.
e.g.
2
Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as described.
• Zooming does not work on subtitles or menus included on
DVDs.
Each time you press the ZOOM button, the magnification
level changes as follows:
• The magnification level varies depending on the picture size
you select.
1
2
3
Off
Press the ZOOM button to select the magnification level.
Press the buttons to view a different part of the
/
/
/
image.You may move the image from the centre position to
UP, DOWN, LEFT and RIGHT direction.
When you reach the edge of the image, the display will not
shift anymore in that direction.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
To exit the audio enhancement selection
Press E.A.M.
E.A.M.
1
Leave the DVD player unattended for about a few
seconds after having made a selection.
The sound enhancement will appear:
3D effect
Press the E.A.M. button again, the sound enhancement Notes
change to Off.
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD player is connected to an amplifier equipped
with Dolby Surround Pro Logic, select “3D effect”. Otherwise,
Dolby Surround Pro Logic may function differently than usual.
3D*:
To obtain expansive virtual surround sound effects
from two speakers.
To use this enhancement on sounds output from the
ANALOG AUDIO OUT jacks, be sure to set “Digital
Output” to “PCM”.
* Effective in playback of a DVD.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Enhancement (E.P.M.*)
You can easily select a preferred picture enhancement.
*E.P.M.: Enhanced Picture Mode
Selecting the picture enhancement
To exit the picture enhancement selection
Press E.P.M. again.
Press E.P.M.
1
E.P.M
E.P.M
The picture enhancement menu
appears.
1
6
1
1
12
12
Note
Contrast
Actual effect to picture may vary depending on the TV. Make
selection according to your preference.
Select the picture enhancement by
2pressing
/
, then press
/
to make
your selections.
Each time you press the
/
button, the picture
enhancement changes.
Selecting Subtitles
You can display subtitles on the TV screen and
select a subtitle language from those included on
the DVD.
Selecting a subtitle language
Press SUBTITLE during playback.
SUBTITLE
Press SUBTITLE while the subtitle setting
is displayed on the TV screen.
2
1
The current subtitle setting is
displayed.
Each time you press the SUBTITLE
button, the subtitle languages included
on the DVD change.
e.g.
e.g.
To turn subtitles on or off
To turn off the subtitle setting display,
press the SUBTITLE button repeatedly
Off
1. Press SUBTITLE during playback.
2. Press SUBTITLE repeatedly until the
displayed.
Off
is
until
is displayed.
Notes
Notes
• Some DVDs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function
to off.
• During some scenes, the subtitles may not appear
immediately after you select your desired language.
• Some DVDs will allow you to make subtitle selections and
turn subtitles on or off only via the disc menu.
• When you turn on the DVD player or replace a disc, the player
returns to the initial default setting.
• When you select a subtitle language which is not included on
the disc, the DVD player plays a prior language programmed
on the disc.
• During some scenes, the subtitles may not appear
immediately after you change the subtitle language.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Selecting the Camera Angle
If the scene was recorded from multiple angles,
you can easily change the camera angle of the
scene you are watching.
Changing the camera angle
Press ANGLE while the angle number
is displayed on theTV screen.
Press ANGLE while playing a scene
recorded with multiple angles.
2
1
ANGLE
ANGLE
Press the ANGLE button repeatedly
While playing a scene recorded with
to change the scene to the next angle
in those recorded.
multiple angles, press the ANGLE
button.
e.g.
•
•
About two seconds later, playback
continues from the new angle you
selected.
If no button is pressed within 10
seconds, playback continues
without changing the current angle.
Number changes to show the number
of the current angle. (The maximum
number of possible angles is 9)
To resume normal playback
Press ANGLE repeatedly until the “
” is displayed.
1/3
Notes:
•
•
This function can only be used for discs on which scenes shot from multiple angles have been recorded.
If only one angle is recorded, “ ” is displayed.
1/1
Selecting a Language
You can select a preferred language and sound
recording system from those included on the DVD.
Selecting a playback audio setting
Notes
Press AUDIO during playback.
• When you turn on the DVD player or replace a disc, player
returns to the initial default setting.
If you select a sound track which is not included on the disc,
the DVD player plays a prior sound track programmed on the
disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections
on the disc menu.
1
2
AUDIO
The current audio setting is displayed.
e.g.
Recorded audio format number changes
sequentially. (The maximum number of
possible audio formats is 8.)
Selecting sound channels ofVIDEO CDs
If the abbreviation of the language appears instead
of the language name. Refer to the list of languages
and their abbreviations
Press AUDIO repeatedly during
AUDIO
playback to hear a different audio
channel (Stereo, Left, Right or Mix).
.
37
Press AUDIO while the audio setting is
displayed on theTV screen.
Each time you press the AUDIO
button, the audio settings included on
the DVD change.
AUDIO
The audio setting display will disappear after a few
seconds.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen Display Operation
When you turn on the on-screen display, you can view information on operational status and access features and settings.
On-screen display operation
Press NAVI.
NAVI
The following display appears.
e.g. When playing a DVD.
Select by pressing
then press ENTER to
access the feature.
/
Chapter number
00:30:34/01:00:52 1/1 5/12
Elapsed time
Remaining time
Title number
Features
:
To start playback.
To pause playback.
Title number (Track number)
:
Chapter number
:
To stop playback.
Elapsed time of the current title or track
:
Playback starts from the beginning of the current
chapter or track.
Remaining time of the current title or track
When you press twice in quick successions, playback
starts from the beginning of the preceding chapter or
track.
:
To locate succeeding chapters or tracks.
Viewing the operational status
1. Press DISPLAY.
The following display appears.
Time counter
Elapsed time / remaining time of the current track
Elapsed time / remaining time of the current title
Time
“PBC On” will
be displayed
when PBC is
on.
Time
00:01:12 / 01:52:46
Title number
Chapter number
3. To turn off the display, press DISPLAY
again.
2. Press DISPLAY again.
Bit rate (Mbit/s)
Audio setting
Angle setting
D 2 Ch Eng
Amount of picture, sound and subtitle data
in the DVD transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
Subtitle setting
Bit rate
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Playing MP3 Files
You can play MP3 files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing MP3 files
Play modes for MP3/CD/DivX®
Preparations
When you play MP3/CD/DivX®, you are able to modify the Play
modes through the Toolkit which appears on the right of below
•
Make sure that a disc you want to play is compatible
with this DVD player.
picture on the screen. Press
/
buttons to navigate between
the windows and buttons to select files/tracks or play mode
/
Place a CD that contains MP3 files on
the disc tray.
items.Then press ENTER button. Please refer to below steps to
playback files/tracks in the Program view list:
1. Select Edit mode in the Toolkit then press ENTER button to
start edit mode.
1
2
Press OPEN/CLOSE to load the disc.
2. Select a file/track or more files/tracks you want in the original
A list of folders/files will appear on the screen.
view list with the ENTER button.
3. Select Add to program in theToolkit then press ENTER.“
Press
/
to select the desired folder or
“
track/file, then press ENTER.
If a track/file is selected, playback will start.
If a folder is selected, the files in the folder
will appear.
will disappear from the screen. It means that the files/tracks
you have selected already added into the program view list.
4. Select Program view in the
Toolkit then press ENTER to
T01_Divx1.5Mbp.MP3
1/3
open the files/tracks in the
Program view list that you
already selected in step 2.
5. Press PLAY to playback all
files/tracks in the Program
view list.
T01_Divx1.5Mbp
Repeat
Mode
:
:
Off
To stop playback, press STOP.
T02_Divx3Mbps
T03_Divx4Mbps
Normal
3
JPEG Preview
The Toolkit has the following play mode items:
• Filter (Audio/Photo/Video): Sets file filters.
Filter is not applicable to Audio CD.
• Repeat (Off/Track/All):
Off: Resumes normal playback.
Track: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode (Normal/Shuffle/Music Intro):
Normal: Resumes normal playback.
Selecting a specific time of the current track
1. Press T.
2. Enter the time to select a specific time you want to play.
3. Press ENTER to begin playback of the selected time.
Notes
• Letters of a file/folder name overflowing the given space are not
displayed.
Shuffle: Playbacks track/file in random order.
• You can play in fast reverse or fast forward during MP3 playback.
Music Intro: Only playbacks the first 10 seconds of all the
files on the current folder or all tracks on the disc.
• Edit mode: Memory operation works only when Edit mode is
selected. After finish storing the files/tracks you want into
the Program view list, select “Edit mode” again and press
ENTER to release edit mode.
• Program view:To view tracks/files in the Program view list.
It is disabled when the Program view list is empty.
• Add to program: Add files/tracks to the Program view list. It
is disabled if the Edit mode is not selected. (The maximum
number of files/tracks can be added is 30.)
• Browser view:To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the Program view
list. Select a file/track or more you want to delete in stop
mode. “ “ will appear besides the deleted file/track. Select
Clear program and then press ENTER. It is disabled if the
Edit mode is not selected.
To pause playback
Press PAUSE/STEP during playback.
To resume normal playback, press
the PLAY button.
Notes
• Some discs may not permit this operation.
• The COAXIAL DIGITAL AUDIO OUT jack outputs MP3 sounds
in the linear PCM format regardless of the current “Digital Output”
selection.
• The SKIP function is also available.
Playable files
MP3 disc compatibility with this player is limited as follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
44.1 kHz only
This DVD player requires discs/recordings to meet certain technical
standards in order to achieve optimal playback quality. Pre-
recorded DVDs are automatically set to these standards. There
are many different types of recordable disc formats (including
CD-R containing MP3 files). Because this area of technology is
still evolving, Toshiba cannot guarantee that all recordable discs
will produce optimal playback quality. The technical criteria set
forth in this owner’s manual are meant only as a guide.
• Sampling Frequency:
• Bit rate:
• CD physical format:
• File system:
32 kbps - 320 kbps (CBR*)
Mode 1, Mode 2 XA Form 1
ISO9660 Level 1, 2 or Joliet
A file name should be in alphabet and
numerals only, and must incorporate
“MP3” extension. e.g. “********.MP3”.
• File name:
• Total number of folders: Less than 256
• Total number of files:
* CBR = Constant Bit Rate
Please be advised that you must obtain permission from the
applicable copyright owners to download copyrighted content,
including music files, in any format, including the MP3 formats,
prior to the downloading thereof.Toshiba has no right to grant and
does not grant permission to download any copyrighted content.
Less than 1000
Note: When the MP3 file is out of the above specifications, the
song may be skipped or muted with counter moving.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing JPEG Files
You can play JPEG files that have been recorded on a CD-R or CD-RW on the DVD player.You can select a preferred view:a
page of 9 thumbnail images or a single image view. Also, rotating, enlarging and shifting of each image can be possible.
33
To playback in HD JPEG resolution, see
.
Viewing JPEG files
Preparations
•
Prepare a disc that contains JPEG files you want to view (see next page for Jpeg files compatibility). In Setup
32
Menu, it is preferred to select “Original” for “View Mode”
.
•
Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function
settings via the on-screen displays of the DVD player. If the TV is adjusted to other sizes, e.g. “16:9”, images will
appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.
Press the
/
/
/
buttons to view a different part of the
Press OPEN/CLOSE to open the disc tray,
place a disc that contains JPEG files.
image.You may move the image from the centre position to
UP, DOWN, LEFT and RIGHT direction.When you reach the
edge of the image, the display will not shift anymore in that
direction.
1
Press OPEN/CLOSE to close the disc
tray. A list of folders/files will appear on
the screen.
To resume normal playback
1/
3
A list of files in the
Press the ZOOM repeatedly until the
Off is displayed.
disc
appears.
•
Original picture is restored when the
appears.
Depending on the file size, some files may
not display the entire image.
Off
Repeat
Mode
:
:
Off
ZOOM
(Selection mode)
e.g.
Normal
•
To rotate an image
W: 515 H:770
During playback, press the
the picture on the TV screen.
/
button repeatedly to rotate
Press
/
button to select your
desired file, and then press ENTER or
PLAY button to start slide show
: rotate the picture anti-clockwise by 90o
: rotate the picture clockwise by 90o.
34
playback
.
To set transition effect
Press STOP to display a folder list.
During playback, press the ANGLE button to select the
transition effect: Wipe down transition, Wipe up transition,
... , No transition.
Note: When you press button to
/
select the left file, the selected picture
will appear at the lower right corner.
Note
The transition effect only works in 480p/576p video
resolution if the HD JPEG Mode is set to “On”.
To quit the JPEG playback, press STOP.
• Pressing the OPEN/CLOSE button to open
the disc tray can also quit the playback.
Viewing a thumbnail view
To pause playback
Press PAUSE/STEP during playback
To resume normal playback, press
Press TOP MENU in full-screen review.
1
e.g.
PLAY.
To change the image
To view the succeeding image, press SKIP
.
To view the previous image, press SKIP
.
Press the
/
/
/
to select an
image, press PLAY to view one
image in full-screen and
automatically images will be
displayed one by one again in a few
seconds.
To magnify image
Press ZOOM repeatedly.
ZOOM
Each time you press the ZOOM button, the
magnification level changes as follows:
Turn the page if necessary
Press SKIP to view other thumbnail screen.
/
1
2
3
Off
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
JPEG files compatibility
Discs whose compatibility with this DVD player has been confirmed by TOSHIBA are as follows.
CANON QuickCD
Kodak Picture CD
FUJICOLOR CD
NORITSU QSS CD
JPEG disc compatibility with this DVD player is limited as follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
• CD physical format:
• File system:
Mode 1, Mode 2 XA Form 1
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and numerals only, and must incorporate “JPG”
extension.
e.g.“********.JPG” (Do not name the file with “JPE” or “JPEG” extension.)
• Total number of folders:
• Total number of files:
Less than 256
Less than 1000
Depending on the file size, some files may not display the entire image.
Some discs may not permit this operation. Especially, the following conditions of included files will increase the disc’s
inability.
1. Pixels over 2880 x 1920 in height and/or width
2. File size over 2M bytes
3. File format except Exif
Playing DivX®/MPEG-4 Files
You can play DivX® and MPEG-4 files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing DivX®/MPEG-4 files
Playable files
Press OPEN/CLOSE to open the disc
DivX® / MPEG-4 disc compatibility with this player is limited as
follows:
tray, place a disc that contains DivX® or
MPEG-4 files.
1
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
DivX® 3.11, 4.12, 5.0, 5.1
Press OPEN/CLOSE to close
the disc tray, after completion of
reading, a list of folders in the
disc will appear.
• DivX® versions:
• Audio format:
CBR MP3, VBR MP3, Mono MP3,
DivX® AC3
• Enhance video:
• Frame rate:
• CD physical format:
• File system:
GMC, Qpel, Progressive B-frames
8 to 25 fps
1/3
I
Mode 1, Mode 2 X A Form 1
ISO9660 Level 1, 2 or Joliet
A file name should be in alphabet and
numerals only, and must incorporate
“DIVX” or “AVI” extension.
A list of folders in the disc
appears.
Repeat
Mode
:
:
Off
Normal
• File name:
e.g.
e.g. “ *******.DIVX ”, “ *******.AVI ”
• Total number of folders: Less than 256
• Total number of files:
Less than 1000
Press
/
to select your desired
file, and then press ENTER or
PLAY button to start playback.
If your DivX® files include the
subtitle file supported by this unit
(see 31 ), the “External Subtitle
File Selection” menu will appear,
Notes
• It is recommended to record the same kind of files in a CD-R or
CD-RW.
• Some DivX® Video-On-Demand files may require registration
code of your DVD player, you may get the code in Misc
settings
.
use
/
to select one extension
36
and then press ENTER to start
playback.
DivX, DivX Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
Press STOP to display a folder
list.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing USB Device
You can connect the USB flash drives (not included) to the USB jack on the front of DVD player.
You can play the files in MP3, DivX® or JPEG format stored on a USB flash drive by connecting it to this player.
Connecting to USB flash drive
To pause playback
Press PAUSE/STEP during playback
Plug the USB flash drive to the USB
jack on the front of DVD player.
1
To resume normal playback, press
PLAY.
Press the USB button on the remote
control to select USB mode during DVD
stop.
2
To stop playback
Pressing the OPEN/CLOSE button to open
the disc tray can also quit the playback.
•
USB
1 /16
01
01.MP3
Repeat : Off
02
03
04
05
A list of folders/files
will appear on the
screen.
Mode : Normal
To return to DVD mode
Pressing the DVD button on the remote
•
DVD
JPEG Preview
control to resume DVD playback during
USB device stop.
06
e.g.
Press
/
button to select your
desired file, and then press ENTER
or PLAY button to start playback.
Notes
• It is recommended to plug the USB flash drive when the DVD player is off.
• It does not support USB harddisk mass storage device, multi-card reader and other USB computer peripheral.
• It only supports FAT format (e.g. It does not support NTFS).
• It only supports USB flash drive (max. 4G bytes).
• The unit can recognise up to 127 folders and 999 files only.
• It is not possible to play back files whose file size exceeds 1G bytes.
• The connection may not be available depending on the type of your USB flash drive.
• Do not disconnect the USB flash drive when you are playing it, it may corrupt the data. You may remove it in stop
mode or DVD mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
Setting procedure
Setting details
Press SETUP during stop.
Language
: English
: Off
1
2
Language
The following on-screen display
appears.
DivX subtitle
DVD Menu
: ASCII
: English
: English
Language
: English
: Off
DivX subtitle
DVD Menu
: ASCII
: English
: English
Language
English:
To view on-screen displays in English.
Français: To view on-screen displays in French.
Press
/
to select an option for the
:
:
To view on-screen displays in Arabic.
To view on-screen displays in Persian.
To view on-screen displays in Russian.
setting you want to change, then press
.
Ðóññêèé:
Language settings
Video settings
Audio settings
Rating settings
Misc settings
Indonesia: To view on-screen displays in Indonesian.
1) Press SETUP button.
2) Press button to select Language.
3) Press ENTER button, then use the
select a preferred language.
4) Press ENTER button.
/
button to
5) Press SETUP button to exit the menu.
Press
/
to select the setting you want
3
4
to change, then press ENTER.
Language
DivX subtitle
Ðóññêèé
DVD Menu
Change the selection by
/
buttons, by
referring to the corresponding pages, then
press ENTER.
DVD
Subtitle
To select a preferred language (English, French,
Arabic, Persian, Russian or Indonesian) for subtitles.
Repeat steps 3 and 4 to change other
settings.
To select another option, press button to go back to
step 2.
Auto: To display subtitles in different languages other
than you selected.
Off: To disable subtitles.
5
1) Press SETUP button.
2) Press
Subtitle.
3) Press ENTER button, then use the
a preferred language.
button then use the
/
button to select
button to select
Press SETUP.
6
/
The on-screen display disappears.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
Note
To quit the procedure, press the SETUP button to turn off
the on-screen display.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Audio
Language
Indonesian
To select a preferred language (English, French, Arabic,
Persian, Russian or Indonesian) for the sound track.
DivX subtitle
DVD Menu
1) Press SETUP button.
2) Press
button, then use the
/
button to select
button to select
Audio.
3) Press ENTER button, then use the
/
a preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
Notes
• Some DVDs may be set to display subtitles in a different
language other than you selected. A prior subtitle language
may be programmed on the disc.
Language
• Some DVDs allow you to change subtitle selections only
via the disc menu. If this is the case, press the MENU
button and choose the appropriate subtitle language from
the selection on the disc menu.
: Off
DivX subtitle
ko18_r
French
DVD Menu
Arabic
Persian
Russian
DivX® Subtitle
If your DivX® files include a subtitle file, then you may
select a supported DivX® subtitle language by region:
Note
Some DVDs may not be played in a different language than
you selected. A prior language may be programmed on the
disc.
ASCII
Greek
Unicode
Turkish
Hebrew
Arabic
Central European
Cyrillic
KO18_R
1) Press SETUP button.
2) Press button, then use the
DivX subtitle.
DVD
DVD Menu
/
button to select
button to
To select a preferred language (English, French, Arabic,
Persian, Russian or Indonesian) for DVD menu.
1) Press SETUP button.
3) Press ENTER button, then use the
/
select a preferred DivX® subtitle language.
4) Press ENTER button.
2) Press button, then use the
/
button to select DVD
5) Press SETUP button to exit the menu.
Menu.
3) Press ENTER button, then use the
a preferred language.
/
button to select
Language
4) Press ENTER button.
: Off
5) Press SETUP button to exit the menu.
ASCII
DivX subtitle
DVD Menu
Unicode
Turkish
Central European
Cyrillic
Language
: Off
DivX subtitle
DVD Menu
French
Arabic
Notes
Persian
Russian
•
KOI8_R is an 8-bit character encoding, designed to cover
Russian, which uses the Cyrillic alphabet. It also happens
to cover Bulgarian.
•
•
If your DivX® files do not include the subtitle file, you
cannot use this selection.
Note
Some DVDs may not include your pre-selected language.
In this case, the DVD player automatically displays disc
menus consistent with the disc’s initial language setting.
Supported subtitle file formats:
.srt, .sub, .txt, .smi, .ssa.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
DVD
View Mode
: 16 : 9
Aspect Ratio
: Auto Fit
Video
The user may select one of the following options:
Fill: Fill the screen with decoded image.
Original: Display image as it original size. “Original” is
preferred for Jpeg viewing.
Height Fit: Fit the screen height with image height.
Width Fit: Fit the screen width with image width.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
TV System
Video Out
: PAL
: HDMI
HDMI Resolution : Auto
HD JPEG Mode : On
JPEG Interval
: 5 seconds
Pan Scan: Automatically display decoded image on full
screen without distortion.
DVD
Aspect Ratio
1) Press SETUP button.
2) Press
3) Press
/
button to select Video.
1) Press SETUP button.
button, then use the
/
button to select
button to the
2) Press
3) Press
/
button to select Video.
button, then use the
View Mode.
4) Press ENTER button, then use the
options (Fill, Original, Height Fit, Width Fit, Auto Fit or
Pan Scan).
/
button to select
/ button to shift
/
Aspect Ratio.
4) Press ENTER button, then use the
and change the TV type.
5) Press ENTER button.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
6) Press SETUP button to exit the menu.
Aspect Ratio
Aspect Ratio
: 16 : 9
TV System
Video Out
TV System
: HDMI
Height Fit
Video Out
HDMI Resolution : Auto
HD JPEG Mode : On
Width Fit
HDMI Resolution
HD JPEG Mode
JPEG Interval
: 5 seconds
JPEG Interval
: 5 seconds
4:3
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill your TV
screen. Either or both sides of the picture
are cut off.
Pan Scan
Auto Fit
Select when a standard 4:3 TV is
connected. Displays pictures cropped
to fill your TV screen. Either or both
sides of the picture are cut off.
16:9
Select when a 16:9 TV is connected.
Automatically fit the decoded image
on screen without distortion. Black
bars will be present on top/bottom or
left/right of screen.
Notes
•
The displayable picture size is preset on the DVD.
Therefore, the playback picture of some DVDs may not
conform to the picture size you select.
Note
Depending on the DVDs, you may not be able to view
the mode as selected.
•
When you play DVDs recorded in the 4:3 picture size
only, the playback picture always appears in the 4:3 picture
size regardless of the TV shape setting. But, if Video
Output is set to HDMI 720p/1080i/1080p, then picture
will be 16:9 only.
•
If you select “16:9” and you own a 4:3 TV set, the DVD
playback picture will be horizontally distorted during
playback. Images will appear to be horizontally
compressed.Always be sure that yourTV shape conforms
to the actual TV in use.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TV System
HDMI Resolution
1) Press SETUP button.
1) Press SETUP button.
2) Press
3) Press
/
button to select Video.
2) Press
3) Press button, then use the
TV System.
4) Press ENTER button, then use the
shift and change the TV system.
5) Press ENTER button.
/
button to select Video.
button, then use the
/
button to select
/
button to select
HDMI Resolution.
4) Press ENTER button, then use the
select the options (Auto, 480p/576p, 720p, 1080i or
1080p).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
/
button to
/
button to
6) Press SETUP button to exit the menu.
Aspect Ratio
: 16 : 9
Aspect Ratio
: 16 : 9
: Auto Fit
NTSC
PAL
: Auto Fit
TV System
TV System
Video Out
: PAL
Auto
Video Out
HDMI Resolution
HD JPEG Mode
Auto
480p/576p
HDMI Resolution
HD JPEG Mode
JPEG Interval
720p
1080i
1080p
JPEG Interval
: 5 seconds
Notes
NTSC: Select if your TV system is NTSC.
• If the Video Out is not set to “HDMI”, you cannot select
the “HDMI Resolution”.
• Select the HDMI resolution according to the performance
of the connected TV.
PAL: Select if your TV system is PAL.
Auto: The DVD player automatically identifies PAL or
NTSC video system of disc. Connect
a
a
multisystem TV (PAL / NTSC compatible) to view
a picture. A playback picture may be distorted
when detected a signal change between PAL
and NTSC on the disc. For the case of
Progressive mode, your multisystem TV must be
able to support 525p and 625p.
HD JPEG Mode
1) Press SETUP button.
2) Press
/
button to select Video.
3) Press button, then use the
JPEG Mode.
4) Press ENTER button, then use the
On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
/
button to select HD
Video Out
/
button to select
1) Press SETUP button.
2) Press
3) Press
/
button to select Video.
button, then use the
/
button to select
button to select
Video Out.
4) Press ENTER button, then use the
the output mode (Composite or HDMI).
5) Press ENTER button.
On: JPEG image is displayed in a suitable picture quality
/
(480p/576p, 720p, 1080i or 1080p).
Off: The picture quality is fixed to 480p/576p.
6) Press SETUP button to exit the menu.
Aspect Ratio
: 16 : 9
Aspect Ratio
: 16 : 9
: Auto Fit
: PAL
: Auto Fit
TV System
: PAL
TV System
Video Out
Video Out
: HDMI
Composite
HDMI Resolution
HD JPEG Mode
On
Off
HDMI Resolution
HD JPEG Mode
JPEG Interval
HDMI
JPEG Interval
: 5 seconds
Notes
• If the Video Out is not set to “HDMI”, you cannot select
the “HD JPEG Mode”.
• All JPEG pictures will not be output through the VIDEO
OUT jack when 720p, 1080i, 1080p or Auto is selected
with HD JPEG Mode on.
• For HDMI output, DISPLAY and ZOOM buttons only work
in 480p/576p resolution mode when HD JPEG Mode is
On.
Composite: Select if you connect the DVD to your TV
via composite video (yellow) input.
HDMI:
High Definition Multimedia Interface. Select if
you connect the DVD to TV via HDMI input.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
PCM: Select when connected to a Multi-channel digital
JPEG Interval
stereo amplifier.The DVD player outputs sound in the PCM
stereo format when you play a DVD recorded on the Dolby
Digital, MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
“Bitstream” if your amplifier supports “DTS”.
1) Press SETUP button.
2) Press
/
button to select the Video.
3) Press button, then the
Interval.
4) Press ENTER button, then the
change the JPEG Interval.
5) Press ENTER button.
/
button to select the JPEG
Off:To disable Digital Output.
/
button to shift and
Off
6) Press SETUP button to exit the menu.
PCM
Bitstream
Aspect Ratio
: 16 : 9
: Auto Fit
TV System
: PAL
: HDMI
Off
Video Out
HDMI Resolution
HD JPEG Mode
JPEG Interval
5 seconds
Notes
10 seconds
15 seconds
•
When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analogue audio jacks,
select “PCM” or “Bitstream”.
•
If this DVD player is connected to a TV using HDMI,
make sure to select “PCM”.
Off:
Plays back one file at a time.
5 seconds: Plays back images in the form of a slide
show at 5 seconds interval.
10 seconds: Plays back images in the form of a slide
show at 10 seconds interval.
15 seconds: Plays back images in the form of a slide
show at 15 seconds interval.
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output.You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press
3) Press
Night Mode.
4) Press ENTER button, then use the
select the On or Off mode.
/
button to select Audio.
: PCM
Audio
button, then use the
/
button to select
button to
: Off
/
5) Press ENTER button.
6) Press SETUP button to exit the menu.
: PCM
Off
On
Digital Output
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press
3) Press
Digital Output.
4) Press ENTER button, then use the
the output sound format.
5) Press ENTER button.
/
button to select Audio.
Note
button, then use the
/
button to select
button to select
Night mode is Dynamic Range Control (DRC) option for
analogue audio output.
/
6) Press SETUP button to exit the menu.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Set Password
Parental Control
Set Password
:
8. Adult
Rating
New Password can be set to replace the default password.
1) Press SETUP button.
2) Press
/
button to select Rating.
3) Press button, then use the
/
button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current
password (If the password has not been set yet after
you purchase this unit, it is “8888”). Then press
ENTER.
6) Press ENTER button again,“New Password”screen will
appear. Press the number buttons to input the new
password.
7) Press ENTER button, “Confirm Password” screen will
appear.Enter the same password again for confirmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
DVD
Parental Control
DVDs equipped with the password function are rated
according to their content.The contents allowed by a parental
lock level and the way a DVD can be controlled may vary
from disc to disc.
For example, if the disc allowed, you could edit out violent
scenes unsuitable for children and replace them with more
suitable scenes, or you could lock out playback of the disc
altogether.
If you forget the password, you can erase your
current password by pressing number button 8
on the remote control four times, then press
ENTER button to confirm the setting.
•
DVDs may or may not respond to the parental lock
settings. This is not a defect in the DVD player. Make
sure this function works with your DVDs.
PASSWORD:8888
1) Press SETUP button.
2) Press
3) Press
/
to select Rating.
button to
Misc
select Parental
Control, then press
ENTER button.
“Enter Password”
screen will appear.
Parental Control
Set Password
Enter Password:
:
8. Adult
Screen saver
HDMI CEC
:
:
On
Off
4) Press “8888” using
number buttons.
(Please note, this is
presetting password of this unit).Then press ENTER.
Press ENTER again to list the parental level.
Use Default Settings
The parental lock level is equivalent to the following
ratings:
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult
1) Press SETUP button.
Level 4: PG-13
2) Press
/
button to select Misc.
5) Press
/
to select the rating from 1 to 8. Rating one
3) Press button to select Use Default Settings, then
press ENTER button.
(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental Level
setting.
4) Press
/
button to select “Yes”, then press ENTER
button.The original setting will be restored.
If the DVD has been designed to temporarily cancel the
Parental Level, the screen will change depending on which
disc is played. If you select “YES” with the ENTER
button, “Enter Password”screen will appear.Input the 4-
digit password as you have set then followed by ENTER
button and playback will start. If “NO” is selected, press
the OPEN/CLOSE to remove the disc.
Screen saver
:
On
Do you want to use default setting?
Notes
• If you input a wrong password, press CLEAR button
and re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
DivX® Registration
HDMI CEC
Some DivX® Video-On-Demand files required registration
code, please get the code of your DVD player as follow:
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
1) Press SETUP button.
1) Press SETUP button.
2) Press
3) Press
/
button to select Misc.
button, then use the
/
button to select
2) Press
/
button to select Misc.
DivX Registration.
4) Press ENTER button, your registration code will be
shown.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
3) Press button, then use the
HDMI CEC.
4) Press ENTER button, then use the
select the On or Off mode.
5) Press ENTER button.
/
button to select
button to
/
6) Press SETUP button to exit the menu.
Screen saver
DivX Video On Demand
:
On
R
Screen saver
HDMI CEC
:
On
Your registration code is
:
Off
On
Note
This registration code is for DivX® Video-On-Demand only.
Do not apply this code for other applications or websites.
Off: To deactivate HDMI-CEC.
On: To activate HDMI-CEC.
Functions available for the HDMI-CEC
•
One touch play
Screen Saver
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically switch to appropriate input channel.
To turn on or off the screen saver (screen protection
to prevent image burn).
Button for one touch play: [PLAY] (make sure a
disc is inserted.)
1) Press SETUP button.
2) Press
/
button to select Misc.
3) Press button, then use the
Screen saver.
4) Press ENTER button, then use the
select the On or Off mode.
5) Press ENTER button.
/
button to select
button to
•
System information
Get & Set Menu Language:
/
This unit recognizes the OSD languages set for
the TV and automatically set the same language
as the player menu language (OSD menu
language) for this unit.
6) Press SETUP button to exit the menu.
Power off:
When you turn the TV off, this unit will automatically
turn off.
Off
On
Screen saver
HDMI CEC
Receiving operational signal fromTV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
•
This function may not work properly depending on
the TV you are connecting.
If the Video Out is not set to “HDMI”, HDMI-CEC
will not work.
Other components must be compatible with HDMI-CEC
in order to use this function.
Note
•
When you leave the unit in DVD stop mode for approximately
2 minutes, the screen saver of the DVD player automatically
appears if you set the Screen saver to On mode.To turn off
the screen saver, press the PLAY button.
•
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Languages
Table of languages and their abbreviations
Abbreviation
Language
Abbreviation
Language
Abbreviation
Language
– – –
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
Sango
Malay
Spanish
Afar
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
IW
JI
SK
SL
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Yiddish
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
Twi
Ukrainian
Urdu
EU
FA
FI
FJ
FO
FY
GA
GD
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Irish
Scottish Gaelic
Galician
GL
Zulu
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
Nopower.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
11-12
The DVD player turned off by
itself.
• The automatic power off function turned the
unit off.
• Press the PLAY button.
16
16
No picture
Nosound.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on
theTV so the picture from the DVD player
appears on theTV screen.
• The video/HDMI cable is not connected
securely.
• Connect the video/HDMI cable securely into
the appropriate jacks.
11-12
• Mismatch setting between TV and this unit.
• Wrong connection.
• Select the correctVideo Output setting.
• Check the connection.
33
11-12
16
• The equipment connected with the audio cable is
not set to receive DVD signal output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The audio cable is not connected securely.
• The audio receiver or TV is turned off.
• Connect the audio cable securely into the
appropriate jacks.
11-15
16
• Turn on the equipment connected with the
audio cable.
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
34
The playback picture has
occasional distortion.
• The disc is dirty.
• Remove the disc and clean it.
5
-
• It is in fast forward or fast reverse playback.
• Sometimes a small amount of picture
distortion may appear.This is not a
malfunction.
Brightness is unstable or noises
are present in the playback
pictures.
• The effect of copy protection.
• Connect the DVD player directly to theTV.
Avoid connecting the DVD player to aVCR or
TV/VCRcombination.
11
The DVD player does not start
playback.
• No disc is inserted.
• Insert a disc.
16
6
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type
and colour system.)
• The disc is placed upside down.
• Place the disc with the playback side down.
16
16
• The disc is not placed within the guide.
• Place the disc correctly inside the guide on
the disc tray.
• The disc is dirty.
• Clean the disc.
5
• The parental lock function is set.
• Cancel the parental lock function or change
the parental lock level.
35
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback, memory
playback, etc.
• These operations may prevent a proper
progress of the contents.
-
-
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• Press and hold the ON/STANDBY button on
the front panel for more than about 3
seconds.The DVD player turns off.Press the
button again to turn it on. If the buttons still do
not work, disconnect the power plug and insert
it into the wall outlet again.
The remote control does not work • The remote control is not pointed at the
properly.
remote sensor of the DVD player.
• Point the remote control at the remote sensor of
the DVD player.
10
• The remote control is too far from the DVD player. • Operate the remote control within about 7 m.
10
10
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DVD player / outputs / supplied accessories
DVD Player
Power supply
Power consumption
Mass
100V - 240V AC, 50/60Hz
11 W (standby: less than 1.0W)
1.26 kg
External dimensions
Signal system
Laser
430 x 41 x 197 mm (W/H/D)
PAL/3.58 NTSC
Semiconductor laser, wavelength 650/780 nm
Frequency range
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Signal-to-noise ratio
Audio dynamic range
Harmonic distortion
Wow and flutter
More than 93 dB
More than 80 dB
Less than 0.05 %
Below measurable level (less than ±0.001 % (W.PEAK))
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Operating conditions
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
0.5V (p-p), 75 Ω, pin jack x 1
2.0 V (rms), 680 Ω, pin jacks (L, R) x 1
19 pin
Audio output (COAXIAL DIGITAL)
Audio output (ANALOG)
HDMI output
Supplied Accessories
Audio/Video cable................................................. 1
Remote control (SE-R0350) ................................. 1
Batteries (R03/AAA) ............................................. 2
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
811-S90091W021
Download from Www.Somanuals.com. All Manuals Search And Download.
|