Toshiba CRT Television 20AF41 User Manual

TM  
TM  
20AF41  
24AF41  
3I70401D COVER  
1
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome to Toshiba..................................................................................... Inside front cover  
Exploring your new TV ......................................................................................................Inside front cover  
Selecting a location for the TV...........................................................................................Inside front cover  
Important Safeguards ......................................................................................................... 2  
Connecting your TV ............................................................................................................ 4  
Connecting a VCR .......................................................................................................................................4  
Connecting a cable converter box ...............................................................................................................5  
Connecting a DVD/satellite receiver and a VCR .........................................................................................6  
Connecting a DVD with ColorStreamTM and a VCR ....................................................................................6  
Connecting two VCRs .................................................................................................................................7  
Connecting a camcorder .............................................................................................................................7  
Connecting an audio amplifier .....................................................................................................................7  
Using the remote control.................................................................................................... 8  
Preparing the remote control for use ...........................................................................................................8  
Installing the remote control batteries .........................................................................................................8  
Using the remote control with a VCR or a cable TV converter ...................................................................8  
Programming the remote control for use with a VCR or a cable TV converter ...........................................9  
Learning about the remote control ............................................................................................................10  
Setting up your TV .............................................................................................................11  
Changing the on-screen display language ................................................................................................ 11  
Adding channels to the TV’s memory........................................................................................................12  
Programming channels automatically ................................................................................................12  
Adding and erasing channels manually .............................................................................................12  
Changing channels ....................................................................................................................................12  
Using the TVs features .................................................................................................... 13  
Adjusting the channel settings...................................................................................................................13  
Switching between two channels .......................................................................................................13  
Programming your favorite channels .................................................................................................13  
Using theV-Chip.........................................................................................................................................14  
Selecting a PIN code ..........................................................................................................................14  
Blocking programs by ratings .............................................................................................................15  
Blocking unrated movies or programs................................................................................................18  
Blocking channels...............................................................................................................................18  
Labeling channels......................................................................................................................................19  
Adjusting the picture ..................................................................................................................................20  
Adjusting the picture quality ...............................................................................................................20  
Watching video input .................................................................................................................................21  
Selecting the ColorStream mode ..............................................................................................................21  
Displaying on-screen information ..............................................................................................................21  
Setting the sleep timer ...............................................................................................................................21  
Using the closed caption feature ...............................................................................................................21  
Adjusting the sound ...................................................................................................................................22  
Muting the sound ................................................................................................................................22  
Selecting stereo/SAP broadcasts .......................................................................................................22  
Adjusting the sound quality ................................................................................................................23  
Using the BBE feature ........................................................................................................................23  
Using the STABLE SOUND feature ...................................................................................................24  
Auto power off............................................................................................................................................24  
Understanding the Power Return feature ..................................................................................................24  
Appendix............................................................................................................................ 24  
Cleaning and care .....................................................................................................................................24  
Troubleshooting .........................................................................................................................................25  
Specifications.............................................................................................................................................26  
Limited United States warranty .................................................................................................................27  
1
3I70401D P01-03  
3
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle is intended to alert the user to the  
presence of uninsulated dangerous voltage within the  
product's enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in the  
literature accompanying the appliance.  
(OR BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules  
could void the user's authority to operate this equipment.  
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth  
for cleaning.  
6. ATTACHMENTS  
The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement,  
or near a swimming pool.  
8. ACCESSORIES  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
8A. An appliance and cart combination should be moved with care.  
Quick stops, excessive force, and uneven surfaces may cause the appliance  
and cart combination to overturn.  
S3126A  
9. VENTILATION  
Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the unit  
and to protect it from overheating. These openings must not be blocked or covered. The openings should never be  
blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over  
a radiator or heat source. This unit should not be placed in a built-in installation, such as a bookcase, or rack unless  
proper ventilation is provided or the manufacturer's instructions have been adhered to.  
10. POWER SOURCE  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the  
type of power supply to your home, consult your appliance dealer or local power company. For units intended to  
operate from battery power, or other sources, refer to the operating instructions.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating current line plug (a plug having one blade wider than the other).  
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into  
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug. If your unit is equipped with a 3-wire grounding-type plug,  
a plug having a third (grounding) pin, this plug will only fit into a grounding-type power outlet. This too, is a safety  
feature. If you are unable to insert the plug into the outlet, contacts your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the grounding-type plug.  
12. POWERCORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit  
from the appliance.  
2
3I70401D P01-03  
4
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. LIGHTNING  
To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it  
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning  
and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines, or other electric light or  
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out parts  
that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to  
provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical  
Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis-  
charge unit, connection to grounding electrodes, and requirements for the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified service personnel.  
19. DAMAGE REQUIRING SERVICE  
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are  
covered by the operating instructions, as an improper adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician to restore the unit to its normal operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f. When the unit exhibits a distinct change in performance, this indicates a need for service.  
20. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by the manu-  
facturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine  
that the unit is in proper operating condition.  
22. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
23. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding  
system of the building, as close to the point of cable entry as practical.  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE  
ANTENNA LEAD IN WIRE  
GROUND CLAMP  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
3
3I70401D P01-03  
5
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting your TV  
If you haven’t connected electronic equipment before, or you have  
been frustrated in the past, you may wish to read this section. (Cables  
are not supplied.)  
A coaxial cable is the standard cable that comes in from your  
antenna or cable converter box. Coaxial cables use “F” connectors.  
Audio and video cables are usually color coded according to use:  
yellow for video and red and white for audio. The red audio cable is  
for the stereo right channel, and the white audio cable is for the  
stereo (or mono) left channel. If you look at the rear panel of the TV,  
you will see that the terminals are color coded in the same manner  
as the cables.  
S-video cables provide better picture performance. S-video cables  
can only be used with S-video compatible components.  
ColorStreamTM cables come in sets of three and provide the best  
picture performance. ColorStream cables can only be used with  
ColorStream compatible components.  
Caution:  
Do not plug the TV in until you have finished  
connecting all of your equipment.  
S-Video  
Cable  
ANTENNA  
Coaxial Cable  
AUDIO  
Cable  
ColorStream  
Cable  
VIDEO  
Cable  
Connecting a VCR  
This connection allows you to watch local channels and video programs,  
play or record on the VCR while watching TV, and to record from one  
channel while watching another channel.  
You will need:  
one coaxial cable  
one pair of audio cables (only one cable for  
a mono VCR)  
TV  
one video cable  
IN  
OUT  
VIDEO  
Caution:  
VIDEO  
If using a mono VCR, connect L/Mono to  
VCR Audio OUT using only one audio cable.  
If you have a S-VHS VCR, use the S-video  
connections and remove the video cable.  
ANT (75)  
Y
L/MONO  
L/MONO  
AUDIO  
R
PB  
PR  
AUDIO  
S-VIDEO  
R
VIDEO  
1
VIDEO  
2
Note:  
When the video cable and the S-video cable  
to Video1 simultaneously, the S-video will  
automatically take precedence.  
Cable Lead-in  
from cable box  
or antenna  
Stereo VCR  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
4
3I70401D P04-11  
4
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a cable converter box  
This television has an extended tuning range and can tune most cable  
channels without using a cable company supplied converter box. Some  
cable companies offer "premium pay channels" in which the signal is  
scrambled. Descrambling these signals for normal viewing  
requires the use of a descrambler  
device which is generally provided by the cable company.  
For Subscribers to Basic Cable TV Service  
For basic cable service not requiring a Converter/Descrambler box,  
connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack  
on the back of the television.  
For Subscribers to Scrambled Cable TV Service  
If you subscribe to a cable service which requires the use of a Con-  
verter/Descrambler box, connect the incoming cable to the Converter/  
Descrambler box and connect the output of the box to the Antenna  
Jack on the back of the television. Follow the connections shown left.  
Set the television to the output of the Converter/Descrambler box  
(usually channel 3 or 4) and use the Converter/Descrambler box to  
select channels.  
For Subscribers to Unscrambled Basic Cable with Scram-  
bled Premium Channels  
If you subscribe to a cable service in which basic cable channels are  
unscrambled and premium channels require the use of a Converter/  
Descrambler box, you may wish to use a two-set signal splitter (some-  
times called a "two-set coupler") and an A/B Switch box from the cable  
installer or an electronics supply store. Follow the connections shown  
left. With the switch in the "B" position, you can directly tune any  
nonscrambled channels on your TV. With the switch in the "A" position,  
tune your TV to the output of the Converter/Descrambler box (usually  
channel 3 or 4) and use the box to tune scrambled channels.  
Note:  
When you use a converter box with your TV,  
there may be features that you cannot  
program using the remote control, such as  
labeling channels, blocking channels, and  
programming your favorite channels.  
IN  
OUT  
VIDEO  
VIDEO  
Converter/Descrambler  
Converter/Descrambler  
ANT (75)  
Y
L/MONO  
L/MONO  
AUDIO  
R
PB  
PR  
S-VIDEO  
AUDIO  
R
VIDEO  
1
VIDEO  
2
A
Splitter  
A/B Switch  
B
5
3I70401D P04-11  
5
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD/satellite receiver and a VCR  
You will need:  
one coaxial cable  
three pairs of audio cables (only one cable  
for a mono VCR)  
This connection allows you to watch DVD/satellite, video and TV  
programs. You can record from the DVD/satellite receiver and TV, as  
well as record one TV channel while watching another channel.  
To satellite  
two video cables  
one S-video cable  
DVD / Satellite Receiver  
OUT  
L
Satellite IN  
Caution:  
R
You can use a video cable instead of the  
S-video cable, but the picture quality will  
decrease. If you use a S-video cable between  
the TV and DVD/satellite receiver, make the  
audio connections only and remove the video  
connection.  
AUDIO  
S-VIDEO  
TV  
IN  
OUT  
VIDEO  
ANT (75)  
Y
L/MON
NO  
AUDIO  
R
PB  
PR  
DIO  
S-VID
R
VIDEO  
1
VIDEO  
2
To antenna  
Stereo VCR  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
Connecting a DVD with ColorStreamand a VCR  
You will need:  
one coaxial cable  
three pairs of audio cables (only one cable  
for a mono VCR)  
two video cables  
This connection allows you to watch DVD, video or TV programs and to  
record DVD or TV programs. You can record from one source and  
watch a program from another source. Your TV is capable of using  
ColorStream (component video). Connecting your TV to a ColorStream  
compatible DVD, such as a Toshiba DVD, can greatly enhance picture  
quality and performance.  
one set of ColorStream video cables  
Caution:  
DVD Player with ColorStream™  
To play from the DVD, the DVD and TV must  
use ColorStream connections. To record from  
the DVD, the DVD and TV must select Video.  
The ColorStream selection in the OPTION  
menu should be DVD mode. See Selecting  
the ColorStream modeon page 21.  
OUT  
L
COLORSTREAMTM  
R
Y
Cb  
Cr  
AUDIO  
VIDEO  
OUT  
S-VIDEO  
TV  
IN  
OUT  
VIDEO  
VIDEO  
ANT (75)  
Y
L/MONO  
L/MONO  
AUDIO  
R
PB  
PR  
DIO  
S-VIDEO  
R
VO  
1
VIDEO  
2
To antenna  
Stereo VCR  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
VIDEO  
AUDIO  
6
3I70401D P04-11  
6
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting two VCRs  
This connection allows you to record from one VCR to another VCR  
while watching a video program. You will also be able to record from  
one TV channel while watching another channel.  
You will need:  
one coaxial cable  
two pairs of audio cables (only two cables  
for mono VCRs)  
Stereo VCR / Playback  
two video cables  
To antenna  
IN  
IN from ANT  
OUT to TV  
Caution:  
OUT  
Do not connect one VCR to the output and  
input jacks on the TV at the same time. If you  
are using a S-VHS VCR, use the S-video  
connections and remove the video cable.  
CH  
CH  
3
4
VIO  
VIDEO  
VIDEO  
AUDIO  
TV  
IN  
OUT  
VIDEO  
ANT (75)  
Y
L/MONO  
L/NO  
AUDIO  
R
PB  
PR  
AUDIO  
S-VIDEO  
R
VIDEO  
1
2
Stereo VCR/ Recording  
IN  
IN from ANT  
OUT to TV  
OUT  
CH  
CH  
3
4
L
R
AUDIO  
Connecting a camcorder  
This connection allows you to watch video materials recorded on a  
You will need:  
camcorder.  
one pair of audio cables  
one video cable  
Camcorder  
Caution:  
AUDIO  
L
VIDEO  
If you are using a S-VHS camcorder with a  
S-video output, use the Video1 jacks on the  
back of the TV.  
R
OUT  
AUDIO  
VIDEO 3 LNO  
PHONES  
Front Panel of TV  
Connecting an audio amplifier  
This connection allows you to use an audio amplifier to enjoy a high-  
quality sound. This also allows you to use external speakers.  
To control the audio, turn on the TV and the stereo amplifier. You will  
need one pair of audio cables.  
Audio Amplifier  
AUDIO  
L
R
IN  
OUT  
TV  
To cable,  
cable box  
or antenna  
IN  
OUT  
VIDEO  
VIDEO  
ANT (75)  
Y
L/MONO  
L/MONO  
AUDIO  
R
PB  
PR  
AUDIO  
S-VIDEO  
R
VIDEO  
1
VIDEO  
2
7
3I70401D P04-11  
7
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the remote control  
Preparing the remote control for use  
With the remote control, you can operate your TV, most VCR models,  
and cable TV converters together, even if they are different brands. If  
you will be using your TV with a Toshiba VCR, your remote control is  
already programmed and ready to use. If you own different brands of  
VCRs and/or converters, you first have to program your remote control.  
(See “Programming the remote control for use with a VCR or a cable  
TV converter” on page 9.)  
Note:  
This remote controls functions may or may  
not operate your VCR or cable TV converter.  
Refer to the owners manuals supplied with  
the equipment to see which features are  
available. In addition, the original controllers  
may have features not available on this  
remote control. If you would like to continue to  
use these features, you may want to use the  
original remote control.  
Installing the remote control batteries  
To install the batteries:  
1. Open the battery cover of the back of the remote control.  
Caution:  
Dispose of your batteries in a designated  
disposal area. Do not throw your batteries  
into a fire.  
Do not mix battery types or combine used  
batteries with new ones.  
Remove dead batteries immediately to  
prevent battery acid from leaking into the  
battery compartment.  
2. Install two “AAA” size batteries. Match the + and – signs on the  
batteries to the signs on the battery compartment.  
If you do not intend to use the remote control  
for a long time, remove the batteries.  
3. Close the battery cover on to the remote control until the lock snaps.  
Using the remote control with a VCR or a cable TV converter  
VCR  
Cable  
Power  
To control a Toshiba  
VCR:  
To control a cable TV  
converter:  
POWER  
POWER  
TV  
VCR  
CABLE  
TV  
VCR  
CABLE  
Power  
CH RTN  
CH RTN  
Press the VCR button  
first. The buttons  
Program the remote  
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
ENT  
ENT  
Enter  
Enter  
control to recognize the  
brand of your converter  
(see “Programming the  
remote control for use  
with a VCR or cable TV  
converter”, on page 9).  
The buttons shown on  
the right will control the  
cable TV converter. Press  
the CABLE button first.  
100  
100  
shown to the right will  
then control the VCR.  
The rest of the buttons  
will operate the TV as  
usual.  
Channel  
Numbers  
Channel  
Numbers  
0
0
+
+
CH  
CH  
VOL  
VOL  
VOL  
VOL  
+
+
MENU/  
ENTER  
MENU/  
ENTER  
Channel +/–  
CH  
CH  
EXIT  
RECALL TV/VIDEO FAV  
EXIT  
RECALL TV/VIDEO FAV  
RESET CAP/TEXT  
1/2  
RESET CAP/TEXT  
1/2  
FAV  
FAV  
Fast Forward  
CODE  
MTS  
SLEEP  
MUTE  
FF  
CODE  
MTS  
SLEEP  
MUTE  
FF  
Play  
Rewind  
PLAY  
PLAY  
REW  
TV/VCR  
REC  
REW  
TV/VCR  
REC  
STOP  
PAUSE/STILL  
STOP  
PAUSE/STILL  
TV/VCR  
Record  
VCR CH  
VCR CH  
Stop  
VCR CH /▲  
Pause/Still  
8
3I70401D P04-11  
8
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the remote control for use with  
a VCR or a cable TV converter  
This remote control is pre-programmed to operate Toshiba VCRs. To  
use VCRs or cable converters other than Toshiba models, you must  
follow the steps below before you operate your remote control.  
Note:  
When shipped from the factory, the remote  
control is set to operate your TV.  
1. Press the CODE button and the VCR or the CABLE button you  
want to register at the same time.  
If you do not enter the code within 10  
seconds from step 1 or enter the non-listed  
code below, this operation is canceled.  
Each time you replace the batteries, you  
must reprogram the remote control.  
Some newer VCRs are capable of working  
on either of two remote codes. These VCRs  
have a switch labeled VCR1/VCR2.  
If your VCR has this kind of switch, it may  
not respond to any of the code numbers for  
your VCR brand name. In this case, set the  
switch to the other position (VCR1 or VCR2)  
and reprogram the remote control.  
2. Enter the 2-digit code listed below using the Direct Channel  
Selection buttons (0-9) within 10 seconds.  
3. Point the remote control at the VCR or converter and press  
POWER to test the code number.  
If the VCR or converter turns on, you have entered the right  
number.  
If the VCR or converter does not respond to the remote control,  
you may have entered the wrong number. Repeat steps 1-2 with  
another code number.  
For future reference, write down the code numbers you used:  
VCR code ________________________  
Cable code _______________________  
Registration codes by product and brand name  
VCR  
Admiral  
08, 61  
31  
31  
23, 38, 41  
02, 18  
06, 47  
21, 26, 33, 50, 55  
14  
09  
12  
14, 59  
44, 46, 48, 54  
36, 46  
02, 18  
03, 21 23, 26, 33, 35, 43, 50  
11, 12, 13, 47  
31  
14, 16, 20  
09  
56, 62, 63  
15, 57  
14, 27  
14, 15, 18, 27  
02, 25, 58  
02  
39  
09, 31  
Multi Tech  
NEC  
Orion  
Panasonic  
Pentax  
Philco  
Philips  
Pioneer  
Portland  
Pro Scan  
Quasar  
RCA  
Realistic  
Samsung  
Sansui  
Sanyo  
Scott  
Sears  
Sharp  
Shintom  
Signature 2000  
Sony  
Sylvania  
Symphonic  
Tashiko  
39  
Adventura  
Aiwa  
Akai  
Audio Dynamics  
Bell & Howell  
Broksonic  
Canon  
Citizen  
Craig  
Curtis Mathes  
Daewoo  
Daytron  
02, 18  
33, 50  
14, 51, 59  
15  
07, 14  
07, 14, 27  
10, 15  
46  
16, 60  
14, 59  
15, 16, 20, 27, 40, 42, 60  
06, 08, 12, 14, 31  
20, 30  
39  
06, 12, 47  
04, 05, 33, 43  
06, 09, 11, 12, 15  
08, 61  
39  
08, 14, 16, 19, 31, 49  
DBX  
Emerson  
Fisher  
Funai  
General Electric  
Goldstar  
Go Video  
Hitachi  
Instant Replay  
J.C. Penney  
JVC  
Kenwood  
Logik  
LXI  
17, 32, 37  
07, 14, 27  
31  
09  
02  
02, 31  
Tatung  
Teac  
Magnavox  
Marantz  
Marta  
Memorex  
Mitsubishi  
Montgomery Ward  
07, 14, 31  
07, 18  
09  
06, 12, 14, 31, 33  
04, 22, 52, 64  
08, 14, 16, 19, 31, 49  
Teknika  
Toshiba  
XR1000  
Vector Research  
Yamaha  
Zenith  
34  
05, 15  
39  
04, 18  
02, 18  
01, 24, 25, 29, 37  
CABLE  
Allegro  
Allegro A/B Switch  
Gemini  
General Electric  
General Instrument  
Hamlin  
Jerrold  
Kale Vision  
Macom  
Magnavox  
NSC  
Oak  
Panasonic  
Paragon  
Philips  
58, 62  
61  
05, 31, 38  
67  
05, 06  
02, 03, 45, 65, 66  
04, 07, 08, 09, 10, 18, 60, 63  
35  
14, 21  
34  
35, 39, 68, 69, 70  
11, 32, 42  
13, 20  
33  
RCA DSS  
Regency  
Samsung  
Scientic Atlanta  
Sprucer  
Standard Comp  
Texscan  
Tocom  
73  
29  
35  
16, 23, 36, 64  
13  
35  
39, 56, 71  
17, 18, 46  
48, 62  
44  
58, 62  
40  
49  
54, 55, 72  
01, 53, 74  
12, 28, 30, 51  
Unika  
United Satellite  
Universal  
Vid Tech  
Video Way  
Viewstar  
Zenith  
47, 50, 52, 54, 55  
15, 43  
Pioneer  
Zenith Satellite  
9
3I70401D P04-11  
9
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Learning about the remote control  
POWER turns the TV on and off (page 8)  
Sleep timer sets the TV to go off at a set time (page 21)  
TV/Video selects video input source (page 21)  
Channel + / cycles through programmed channels (page 12)  
TV/VCR/Cable switches between TV, VCR and Cable (page 9)  
Channel Numbers allow direct access to channels (page 12)  
Volume + / adjusts the volume level  
TV/VCR/Cable  
POWER  
POWER  
TV  
VCR  
CABLE  
CH RTN  
1
4
7
2
5
8
3
6
9
Channel  
Return  
ENT  
Channel  
Numbers  
100  
Channel Return returns to the last viewed channel (page 13)  
0
+
CH  
Menu allows access to programming menus (pages 11-24)  
Enter sets programmed menu information (pages 11-24)  
Channel +/–  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/Enter  
Favorite Channels ▲▲ cycles through favorite channels (page 13)  
Reset resets settings to preset factory formats (pages 20 and 23)  
Volume +/–  
CH  
Recall  
Exit  
EXIT  
RECALL TV/VIDEO FAV  
Closed Captioning turns closed captioning on or off and selects  
channel 1 or 2 (page 21)  
Favorite  
Channels ▲▲  
TV/Video  
Reset  
MTS  
RESET CAP/TEXT  
1/2  
FAV  
Mute mutes the sound (page 22)  
Closed  
Captioning  
CODE  
MTS  
SLEEP  
MUTE  
FF  
MTS switches MTS sound (page 22)  
Recall displays screen information (page 21)  
CODE is used to programming the remote control (page 9)  
Exit exits programming menus (pages 11-24)  
Stop press to stop a videotape  
Mute  
Code  
Sleep  
PLAY  
REW  
TV/VCR  
REC  
Rew  
Play  
FF  
STOP  
PAUSE/STILL  
Pause/Still  
TV/VCR  
VCR CH  
Rec  
VCR  
Channel  
▲▲  
Stop  
Rec press to start recording a videotape  
Play press to play a videotape  
FF press to fast forward a videotape  
Rew press to rewind a videotape  
Pause/Still Press to pause or still a videotape  
TV/VCR toggles between TV and VCR when viewing while recording  
VCR Channel ▲▲ cycles through programmed channels of VCR  
10  
3I70401D P04-11  
10  
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV  
After youve installed the batteries and programmed the remote  
control, you need to set some preferences on the TV using the menu.  
You can access the menu with the buttons on the remote control.  
When you make a menu selection, your changes occur immedi-  
ately. You do not have to press MENU or EXIT to see your  
changes.  
After fifteen seconds, the menu screen will automatically disappear  
if you do not make a selection. Your changes will still be saved.  
When you are finished programming the menus, press EXIT.  
Changing the on-screen display language  
POWER  
TV  
VCR  
CABLE  
You can choose from three different languages (English, French and  
Spanish) for the on-screen displays. Adjustment menus and messages  
will appear in the language of your choice.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
To select a language:  
1. Press MENU, then press or until the OPTION menu appears.  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
CH  
CH  
PICTURE AUDIO SET UP OPTION  
PICTURE AUDIO SET UP OPTION  
Menu  
Exit  
LANGUAGE  
ENGLISH  
LANGUAGE  
ENGLISH FRANCAIS  
CH  
ESPANOL  
START  
CH LABEL  
FAVORITE CH  
V-CHIP  
START  
START  
START  
CH LABEL  
FAVORITE CH  
V-CHIP  
EXIT  
RECALL TV/VIDEO FAV  
START  
START  
COLORSTREAM DVD  
SELECT ADJUST  
COLORSTREAM DVD  
SELECT ADJUST  
RESET CAP/TEXT  
1/2  
FAV  
CODE  
MTS  
SLEEP  
MUTE  
2. Press or to highlight LANGUAGE.  
3. Press or to highlight your desired language.  
11  
3I70401D P04-11  
11  
16/08/2001, 15:57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding channels to the TV’s memory  
Your TV will stop on specific channels that are stored in the TV’s  
channel memory when you press Channel + or –. Use the steps below  
to set all active channels in your area automatically.  
Programming channels automatically  
Your TV can automatically detect all active channels and store them in  
its memory. After the TV has stored the channels in its memory, you  
can erase channels or add your favorite channels.  
To add channels:  
POWER  
TV  
VCR  
CABLE  
1. Press MENU, then press or to display the SET UP menu.  
2. Press L or L until the TV/CABLE  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
selection is highlighted.  
3. Press or to highlight either  
CH  
100  
PICTURE AUDIO SET UP OPTION  
TV or CABLE, depending on  
which you use.  
TV / CABLE  
TV CABLE  
START  
ADD  
0
CH PROGRAM  
ADD / ERASE  
+
CH  
Channel +/–  
If you use an antenna, choose TV.  
If you use cable, choose CABLE.  
VOL  
VOL  
+
MENU/  
ENTER  
SELECT  
ADJUST  
Menu  
4. Press L to select CH PROGRAM.  
CH  
5. Press or to start channel programming. The TV will automati-  
cally cycle through all the TV or Cable channels (depending on  
which you selected), and store all active channels in the channel  
memory.  
EXIT  
RECALL TV/VIDEO FAV  
Exit  
RESET CAP/TEXT  
1/2  
FAV  
While the TV is cycling through the channels, the message  
“PROGRAMMING NOW PLEASE WAIT” appears and count up  
the received channel.  
CODE  
MTS  
SLEEP  
MUTE  
6. When channel programming is complete, the message “COMPLETED  
(channel or cable number)” appears.  
7. Press Channel L or L to view the programmed channels.  
Adding and erasing channels manually  
POWER  
TV  
VCR  
CABLE  
After you’ve programmed the channels, you can add or erase specific  
channels.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
Channel  
Numbers  
To add or erase channels:  
100  
1. Select the channel you want to add or erase using Channel + or –.  
If adding channels, you must select the channel to add by using the  
Channel Number buttons.  
0
+
CH  
Channel +/–  
2. Press MENU, then press or  
to display the SET UP menu.  
3. Press L or L to highlight ADD/  
CH  
VOL  
VOL  
+
PICTURE AUDIO SET UP OPTION  
MENU/  
ENTER  
Menu  
TV / CABLE  
TV  
ERASE.  
CH PROGRAM  
ADD / ERASE  
START  
ADD ERASE  
CH  
4. Press or to select ADD or  
ERASE, whichever function you  
want to perform.  
5. Repeat steps 1-4 for other  
channels you want to add or erase.  
EXIT  
RECALL TV/VIDEO FAV  
SELECT  
ADJUST  
Exit  
RESET CAP/TEXT  
1/2  
FAV  
CODE  
MTS  
SLEEP  
MUTE  
Changing channels  
To change the channel, you can:  
change the programmed channels using the remote control  
select a channel directly using the remote control  
scan the channels using the TV buttons  
To change to the next programmed channel:  
Press Channel + or – on the TV or remote control.  
To change to a specific channel (programmed or unprogrammed):  
Press the Channel Number buttons (0-9 and 100).  
For example, to select channel 125, press the 100 button, the 2  
button, and the 5 button.  
12  
3I70401D P12-21  
12  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TVs features  
POWER  
TV  
VCR  
CABLE  
CH RTN  
Adjusting the channel settings  
1
4
7
2
5
8
3
6
9
Channel  
Return  
ENT  
Switching between two channels  
You can switch between two channels without entering an actual  
channel number each time.  
100  
Channel  
Numbers  
0
+
CH  
To switch between two channels:  
VOL  
VOL  
1. Select the first channel you want to view.  
2. Select a second channel with the Channel Number buttons (0-9,  
100).  
+
MENU/  
ENTER  
3. Press CH RTN. The previous channel will be displayed.  
Each time you press CH RTN, the TV will switch back and forth  
between the two channels.  
CH  
EXIT  
RECALL TV/VIDEO FAV  
RESET CAP/TEXT  
1/2  
FAV  
Programming your favorite channels  
You can preset up to 12 of your favorite channels using the Favorite  
Channel Programming feature. Because this feature scans through  
only your favorite channels, it allows you to skip other channels you  
do not normally watch.  
CODE  
MTS  
SLEEP  
MUTE  
You can still use Channel LL to scan through all the channels you  
programmed in the TVs memory.  
To program your favorite channels:  
1. Select a channel you want to program.  
POWER  
TV  
VCR  
CABLE  
2. Press MENU, then press or to display the OPTION menu.  
3. Press L or L to highlight FAVORITE CH.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
Channel  
Numbers  
CH  
0
PICTURE AUDIO SET UP OPTION  
+
CH  
LANGUAGE  
CH LABEL  
FAVORITE CH  
V-CHIP  
ENGLISH  
START  
START  
START  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
COLORSTREAM DVD  
SELECT  
START  
CH  
Exit  
EXIT  
RECALL TV/VIDEO FAV  
4. Press or to display the FAVORITE CH menu. SET/CLEAR will  
be highlighted.  
Favorite  
Channels  
RESET CAP/TEXT  
1/2  
FAV  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SET UP OPTION  
FAVORITE CH : CH 12  
SET/CLEAR  
SET UP CH  
SET CLEAR  
7
36  
4
1
12 125 63 40  
13 28 97 112  
TV CABLE  
SELECT  
SET  
ENTER  
END  
EXIT  
5. Press or to highlight SET and press ENTER.  
6. Press EXIT to clear the screen.  
7. Repeat steps 1 through 6 for up to 11 other channels.  
To select your favorite channels:  
Press the FAV L LLbuttons on the remote control to select your  
favorite channels.  
The FAV L LLbuttons will not work until you have programmed  
your favorite channels.  
13  
3I70401D P12-21  
13  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To clear your favorite channels:  
POWER  
1. Select a channel you want to clear.  
TV  
VCR  
CABLE  
2. Press MENU, then press or to display the OPTION menu.  
3. Press L or L to highlight FAVORITE CH.  
4. Press or to display the FAVORITE CH menu. SET/CLEAR will  
be highlighted.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
Channel  
Numbers  
0
+
CH  
CH  
PICTURE AUDIO SET UP OPTION  
VOL  
VOL  
+
MENU/  
ENTER  
FAVORITE CH : CH 12  
SET/CLEAR  
SET UP CH  
SET CLEAR  
Menu/  
Enter  
7
36  
4
1
12 125 63 40  
13 28 97 112  
TV CABLE  
SELECT  
CH  
SET  
ENTER  
EXIT  
RECALL TV/VIDEO FAV  
END  
EXIT  
Exit  
RESET CAP/TEXT  
1/2  
FAV  
5. Press the or to highlight CLEAR.  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SET UP OPTION  
FAVORITE CH : CH 12  
SET/CLEAR  
SET UP CH  
SET CLEAR  
7
36  
4
1
12 125 63 40  
13 28 97 112  
TV CABLE  
SELECT  
CLEAR  
ENTER  
END  
EXIT  
6. Press ENTER until 0replaces the channel number you want to  
erase.  
7. Press EXIT to clear the screen.  
8. Repeat steps 1 through 6 for the other channels.  
Using the V-Chip  
You can prevent others from viewing certain programs or channels by  
using the V-Chip feature.  
Selecting a PIN code  
POWER  
TV  
VCR  
CABLE  
Before you can block programs and channels, though, you must select  
a personal identification number (PIN) code. The PIN code you select  
prevents others from changing the rating limits you set.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
To select your PIN code and access the V-Chip menus:  
1. Press MENU, then press or to highlight the OPTION menu.  
2. Press L or L to highlight V-CHIP.  
Channel  
Numbers  
0
+
CH  
VOL  
VOL  
+
MENU/  
ENTER  
CH  
Menu/  
Enter  
PICTURE AUDIO SET UP OPTION  
LANGUAGE  
CH LABEL  
FAVORITE CH  
V-CHIP  
ENGLISH  
START  
START  
START  
CH  
EXIT  
RECALL TV/VIDEO FAV  
Exit  
COLORSTREAM DVD  
SELECT START  
RESET CAP/TEXT  
1/2  
FAV  
CODE  
MTS  
SLEEP  
MUTE  
14  
3I70401D P12-21  
14  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press to or display the V-CHIP menu.  
CH  
PICTURE AUDIO SET UP OPTION  
V-CHIP  
Note:  
BLOCKING  
PIN CODE  
RESET  
SET  
If you forget your PIN code, press RECALL  
four times within five seconds from the V-CHIP  
menu. This allows you to proceed to the  
BLOCKING menu and reset your PIN code.  
SELECT  
END  
ENTER  
[0-9]  
EXIT  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER. The  
BLOCKING menu appears.  
CH  
PICTURE AUDIO SET UP OPTION  
V-CHIP  
ENABLE BLOCKING ON OFF  
SET RATING  
START  
BLOCKING OPTION START  
NEW PIN CODE  
CHANNEL BLOCK  
START  
START  
SELECT  
ADJUST  
5. You may now enable blocking— “Blocking programs by ratings”  
(see below), Blocking channels(see page 18), To change your  
PIN code(below) or Blocking unrated movies or programs(see  
page 18).  
To change your PIN code:  
1. Press MENU, then press or to display the OPTION menu.  
POWER  
TV  
VCR  
CABLE  
2. Press L or L to highlight V-CHIP.  
CH RTN  
3. Press or to display the V-CHIP menu.  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER. The  
BLOCKING menu appears.  
1
4
7
2
5
8
3
6
9
ENT  
100  
Channel  
Numbers  
0
+
CH  
5. Press L or L to highlight NEW PIN CODE and press or to  
display the NEW PIN CODE menu.  
6. Use the Channel Number buttons (0-9) to enter a new code. Press  
ENTER.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
7. Press EXIT to return to normal viewing.  
CH  
EXIT  
RECALL TV/VIDEO FAV  
Blocking programs by ratings  
Exit  
RESET CAP/TEXT  
1/2  
FAV  
The Motion Picture Association of America (MPAA) uses a rating  
system to qualify motion picture content. Television broadcasters  
employ a rating system to qualify the content of television programs, as  
well. The MPAA, Youth TV and TV ratings work with the V-Chip feature  
and allow you to block out programming above the rating limits you  
determine.  
CODE  
MTS  
SLEEP  
MUTE  
15  
3I70401D P12-21  
15  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MPAA Ratings  
X
For adults only.  
NC17  
R
Not intended for anyone 17 or under.  
Restricted. Under 17 requires an accompanying  
parent or adult guardian.  
PG13  
PG  
Parents strongly cautioned. Some material may be  
inappropriate for children under 13.  
Parental guidance suggested. Some material may  
not be appropriate for children.  
G
General audience. Appropriate for all ages.  
Youth TV Ratings  
Y7, Y7 FV  
Directed to older children. This program is designed  
for children age 7 and above. For those programs  
where fantasy violence may be more intense or more  
combative than other programs in this category, such  
programs are designated TV-Y7-FV.  
Y
All children. This program is designed to be appropri-  
ate for all children.  
Note:  
TV Ratings  
To see the rating of the program you are  
viewing, press RECALL at any time.  
MA  
Mature audience only. This program is specifically  
designed to be viewed by adults and therefore may  
be unsuitable for children under 17.  
Language  
Sex  
Violence  
Crude or indecent language.  
Explicit sexual activity.  
Graphic violence.  
14  
Parents strongly cautioned. This program contains  
some material that many parents would find unsuit-  
able for children under 14 years of age.  
Dialog  
Language  
Sex  
Intensely suggestive dialog.  
Strong, coarse language.  
Intense sexual situations.  
Intense violence.  
Violence  
PG  
Parental guidance suggested. This program contains  
material that parents may find unsuitable for younger  
children.  
Dialog  
Language  
Sex  
Some suggestive dialog.  
Infrequent coarse language.  
Some sexual situations.  
Moderate violence  
Violence  
G
General audience. Most parents would find this  
program suitable for all ages.  
No DLSV  
Programs without any Dialog, Language, Sex or  
Violence ratings.  
16  
3I70401D P12-21  
16  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To use the V-Chip to block programs by rating:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press L or L to highlight V-CHIP.  
POWER  
TV  
VCR  
CABLE  
CH RTN  
3. Press or to display the V-CHIP menu.  
1
4
7
2
5
8
3
6
9
ENT  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER.  
The BLOCKING menu appears.  
100  
Channel  
Numbers  
0
+
CH  
VOL  
VOL  
+
CH  
MENU/  
ENTER  
PICTURE AUDIO SET UP OPTION  
Menu/  
Enter  
V-CHIP  
ENABLE BLOCKING ON OFF  
CH  
SET RATING  
START  
EXIT  
RECALL TV/VIDEO FAV  
BLOCKING OPTION START  
NEW PIN CODE  
START  
START  
CHANNEL BLOCK  
Exit  
RESET CAP/TEXT  
1/2  
FAV  
SELECT  
ADJUST  
CODE  
MTS  
SLEEP  
MUTE  
5. Press L or L to highlight ENABLE BLOCKING.  
Press or to highlight ON to enable the V-Chip and program  
blocking by rating.  
Press or to highlight OFF to disable the V-Chip and program  
blocking by rating.  
6. Press L or L to highlight SET RATING. Then, press or to  
display the SET RATING menu.  
CH  
CH  
PICTURE AUDIO SET UP OPTION  
PICTURE AUDIO SET UP OPTION  
SET RATING  
TV RATING  
MA 14 PG  
G
X
MPAA  
DIALOG  
LANGUAGE  
SEX  
VIOLENCE  
NO DLSV  
V-CHIP MENU  
X NC17 R PG13 PG G  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
RATING  
X
X
X
X
X
X
YOUTH TV  
RATING  
Y7FV Y7 Y  
X
X
X
MORE  
SELECT  
START  
ADJUST  
ADJUST  
SELECT  
7. Press L or L to highlight MPAA Rating, Youth TV Rating or  
individual TV Ratings.  
8. Press or to select the ratings which will be blocked. Blocked  
ratings are signified by a red X. Unblocked ratings are signified  
by a green L. As you block ratings, all ratings higher than the  
ones you select are blocked, as well. For example, if you choose  
to block the MPAA rating R, the higher ratings, NC17 and X, are  
automatically blocked, too.  
Note:  
Not all programs are rated. To block programs  
or movies that are unrated, see “Blocking  
unrated movies or programs”, page 18.  
9. When you are done selecting the ratings to be blocked, press  
EXIT to return to normal viewing.  
When you try to view a program with a ratings block, a message will  
appear listing the programs ratings. The program can still be viewed if  
you press MUTE and then enter your PIN code to temporarily bypass  
the block.  
17  
3I70401D P12-21  
17  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blocking unrated movies or programs  
Some movies and programs are not rated. You can block these movies  
and programs using the V-Chip.  
To block unrated movies or programs:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press L or L to highlight V-CHIP.  
3. Press or to display the V-CHIP menu.  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Press ENTER. The  
BLOCKING menu appears.  
5. Press L or L to highlight BLOCKING OPTION.  
6. Press or to display the BLOCKING OPTION menu.  
7. Press L or L to highlight MPAA UNRATED.  
Press or to highlight ON to block unrated movies.  
Press or to highlight OFF to unblock unrated movies.  
8. Press L or LLto highlight TV NONE RATING.  
Press or to highlight ON to block programs with a rating of  
TV NONE. While you select ON position the message NOTICE:  
ENABLING THIS OPTION MAY BLOCK EMERGENCY  
MESSAGESappears.  
Note:  
Blocking television programs with a rating of  
TV NONEmay block emergency messages.  
Press or to highlight OFF to unblock programs with a rating  
of TV NONE.  
9. Press EXIT to return to normal viewing.  
Blocking channels  
You can also choose to block individual channels. These channels will  
not be seen regardless of the ratings of their programming. You can  
choose to block up to four TV channels and four cable channels.  
POWER  
TV  
VCR  
CABLE  
To block channels:  
1. Use the Channel Number Buttons (0-9) display the television  
channel you wish to block.  
2. Press MENU, then press or to highlight the OPTION menu.  
3. Press L or L to highlight V-CHIP and then press or to display  
the V-CHIP menu.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
Channel  
Numbers  
0
+
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, choose a  
four-digit number to be your PIN code. Press ENTER.  
5. Press L or L to highlight CHANNEL BLOCK and then press or  
to display the CHANNEL BLOCK menu.  
CH  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
EXIT  
RECALL TV/VIDEO FAV  
CH  
Exit  
PICTURE AUDIO SET UP OPTION  
RESET CAP/TEXT  
1/2  
FAV  
CH BLOCK : CH 12  
SET/CLEAR  
SET CLEAR  
BLOCKED CH  
0
0
0
0
0
0
0
0
CODE  
MTS  
SLEEP  
MUTE  
TV CABLE  
SELECT  
SET  
ENTER  
END  
EXIT  
6. Press or to:  
SET the channel as one to be blocked.  
CLEAR all channels from the list of blocked channels.  
7. Press ENTER.  
18  
3I70401D P12-21  
18  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Repeat steps 1 through 7 to block other channels. When you are  
finished blocking channels, press EXIT to return to normal  
viewing.  
Note:  
If you try to display a blocked channel, the TV will not display it, but will  
display the nearest unblocked channel.  
After programming CHANNEL BLOCK,  
change channels before turning off the  
television.  
To unblock channels:  
1. Press MENU, then press or to display the OPTION menu.  
2. Press L or L to highlight V-CHIP and then press or to  
display the V-CHIP menu.  
3. Use the Channel Number buttons (0-9) to enter your PIN code. If  
you are accessing the V-Chip menus for the first time, choose a  
four-digit number to be your PIN code. Press ENTER.  
4. Press L or L to highlight CHANNEL BLOCK and then press or  
to display the CHANNEL BLOCK menu.  
5. Press or to highlight CLEAR and clear all channels from the  
list of blocked channels. Press ENTER.  
6. Press EXIT to return to normal viewing.  
Labeling channels  
Channel labels will appear over the channel number display each time  
you turn on the TV, select a channel, or press the Recall button. You  
can choose any four characters to identify the channels.  
To create channel labels:  
1. Select a channel you want to label.  
2. Press MENU then press or until the OPTION menu appears.  
3. Press L or L to highlight CH LABEL.  
CH  
PICTURE AUDIO SET UP OPTION  
POWER  
TV  
VCR  
CABLE  
LANGUAGE  
CH LABEL  
FAVORITE CH  
V-CHIP  
ENGLISH  
START  
START  
START  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
COLORSTREAM DVD  
SELECT  
Channel  
Numbers  
START  
0
+
CH  
4. Press to display the CH LABEL menu. SET/CLEAR will be  
highlighted.  
5. Press or to highlight SET.  
VOL  
VOL  
+
MENU/  
ENTER  
Menu/  
Enter  
CH  
CH  
EXIT  
RECALL TV/VIDEO FAV  
PICTURE AUDIO SET UP OPTION  
Exit  
CH LABEL : CH 12  
RESET CAP/TEXT  
1/2  
FAV  
SET/CLEAR  
LABEL  
SET CLEAR  
CODE  
MTS  
SLEEP  
MUTE  
SELECT  
SET  
ENTER  
END  
EXIT  
6. Press L or L to highlight LABEL.  
CH  
PICTURE AUDIO SET UP OPTION  
CH LABEL : CH 12  
SET/CLEAR  
LABEL  
SET  
A
SELECT  
SET  
ENTER  
END  
EXIT  
19  
3I70401D P12-21  
19  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Assign the label to the channel. Press or to enter a character  
in the first space. Press the button repeatedly until the character  
you want appears on the screen. Press ENTER.  
Note:  
The character will change as below.  
CH  
PICTURE AUDIO SET UP OPTION  
• • •  
• • •  
0
9
A
CH LABEL : CH 12  
+
Z
SPACE  
SET/CLEAR  
LABEL  
SET  
A
SELECT  
SET  
ENTER  
END  
EXIT  
8. Repeat step 7 to enter the rest of the characters.  
If you would like a blank space in the label name, you must  
choose an empty space from the list of characters. Otherwise, a  
dash will appear in that space.  
9. Press EXIT to clear the screen.  
10. Repeat steps 1 through 8 for other channels. You can assign the  
label to all the channels.  
To erase channel labels:  
1. Select a channel with a label.  
2. Press MENU then press or until the OPTION menu appears.  
3. Press L or L to highlight CH LABEL.  
4. Press or to display the CH LABEL menu.  
SET/CLEAR will be highlighted.  
POWER  
TV  
VCR  
CABLE  
5. Press or to highlight CLEAR.  
6. Press ENTER.  
7. Repeat steps 1 through 6 to erase other channel labels.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
100  
0
Adjusting the picture  
+
CH  
Adjusting the picture quality  
VOL  
VOL  
+
You can adjust the picture quality to your personal preferences,  
including the contrast, brightness, color, tint, and sharpness. The  
qualities you choose will be stored automatically in your TVs memory  
so you can recall them at any time.  
MENU/  
ENTER  
Menu  
CH  
EXIT  
RECALL TV/VIDEO FAV  
To adjust the picture quality:  
1. Press MENU, then press or to display the PICTURE menu.  
Exit  
RESET CAP/TEXT  
1/2  
FAV  
Reset  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SET UP OPTION  
CONTRAST  
BRIGHTNESS  
COLOR  
64  
32  
32  
0
TINT  
Note:  
SHARPNESS  
SELECT  
32  
ADJUST  
To reset the picture adjustments to the factory  
settings, press RESET.  
2. Press L or L until the item you want to adjust is highlighted.  
3. Press or to adjust the level.  
The PICTURE items you have adjusted will be stored in theTVs  
memory automatically.  
Selection  
Pressing  
contrast  
brightness  
color  
tint  
sharpness  
lower  
darker  
paler  
reddish  
softer  
higher  
lighter  
deeper  
greenish  
sharper  
20  
3I70401D P12-21  
20  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select the input mode:  
Watching video input  
You can use the TV/VIDEO button on the remote to view a signal  
coming from other devices, such as VCRs or video disc players that  
may be connected to your TV. (See Connecting your TVon page 4.)  
Press the TV/VIDEO button repeatedly to  
select desired mode. The signal source you  
are connected to is displayed in light blue.  
TV  
VIDEO 1  
VIDEO 2  
VIDEO 3  
Selecting the ColorStream mode  
You can use either the ColorStream input for connecting the DVD or  
DTV receiver.  
COLOR  
STREAM  
POWER  
TV  
VCR  
CABLE  
1. Press MENU, then press or until  
CH  
the OPTION menu appears.  
CH RTN  
PICTURE AUDIO SET UP OPTION  
2. Press L or L to highlight  
1
4
7
2
5
8
3
6
9
ENT  
LANGUAGE  
ENGLISH  
COLORSTREAM.  
CH LABEL  
FAVORITE CH  
V-CHIP  
COLORSTREAM DVD DTV  
SELECT ADJUST  
START  
START  
START  
100  
3. Press or to highlight DVD or  
DTV depending on which device is  
connected.  
0
+
CH  
Displaying on-screen information  
VOL  
VOL  
+
MENU/  
ENTER  
Press RECALL to display the following  
on-screen information:  
(
)
TV  
Menu  
STEREO  
SAP  
CABLE 007  
ABCD  
Channel number or VIDEO mode  
CH  
TV/Video  
Recall  
selected  
EXIT  
RECALL TV/VIDEO FAV  
Channel label (if preset)  
Stereo or SAP (second audio program)  
audio status  
RESET CAP/TEXT  
1/2  
FAV  
MPAA  
X
Sleep  
Setting the sleep timer  
CODE  
MTS  
SLEEP  
MUTE  
You can set the TV so it turns off automatically.  
Note:  
To set the sleep timer:  
Press the SLEEP button on the remote control. The clock will count  
down 10 minutes for each press of the SLEEP button (120, 110, ...10,  
0). After the sleep time is programmed, the display will appear briefly  
every ten minutes to remind you that the sleep timer is operating.  
The factory settings are DVD.  
To confirm the sleep timer setting:  
Press the SLEEP button and the remaining time will be momen-  
tarily displayed.  
To cancel the sleep timer:  
POWER  
TV  
VCR  
CABLE  
Press the SLEEP button repeatedly until the display turns to 0.  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
Using the closed caption feature  
100  
You have two options with the closed caption feature: captions or text.  
A caption is a printed version of the dialogue, narration and/or sound  
effects of a TV program. Text is information not related to the program  
that appears on half of the TV screen.  
0
+
CH  
VOL  
VOL  
To view captions or text:  
1. Select the desired program. The captioned programs are usually  
marked in your local TV listing by CC.  
+
MENU/  
ENTER  
Menu  
2. Press CAP/TEXT repeatedly to select caption or text mode.  
CH  
EXIT  
RECALL TV/VIDEO FAV  
Closed  
Caption  
RESET CAP/TEXT  
1/2  
FAV  
CAPTION CH1  
TEXT CH1  
Note:  
3. Press 1/2 to select caption or text channel.  
A closed caption signal may not be decoded  
in the following situations:  
when a video tape has been dubbed  
when the signal reception is weak  
when the signal reception is non-standard  
When you choose a closed captioned channel  
and the text mode, the text screen always  
appears. When there is no signal, however,  
the text screen will not display text characters.  
TEXT CH2  
CAPTION CH2  
4. To turn off the closed-captioned feature, press CAP/TEXT  
repeatedly until the normal TV viewing appears on the screen.  
21  
3I70401D P12-21  
21  
16/08/2001, 15:56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound  
POWER  
TV  
VCR  
CABLE  
Muting the sound  
CH RTN  
Press MUTE to temporarily turn off the sound. While the sound is off,  
the screen will display the word MUTE in the lower right-hand corner.  
To restore the sound, press MUTE again.  
1
4
7
2
5
8
3
6
9
ENT  
100  
0
Selecting stereo/SAP broadcasts  
+
CH  
You can enjoy watching TV while you listen to high-fidelity stereo  
sound with the Multi-channel TV Sound (MTS) feature. MTS can also  
transmit a second audio program (SAP) containing a second language  
or other audio information.  
VOL  
VOL  
+
MENU/  
ENTER  
CH  
EXIT  
RECALL TV/VIDEO FAV  
When the TV receives a stereo or SAP broadcast, the word STEREO  
or SAP appears on the screen when the TV is on, you change the  
channel, or press the RECALL button.  
Recall  
RESET CAP/TEXT  
1/2  
FAV  
The MTS feature is not available while in the VIDEO mode.  
CODE  
MTS  
SLEEP  
MUTE  
Mute  
MTS  
When you are watching a stereo broadcast, the word STEREO is  
displayed in light blue. You should leave your TV set to STEREO so  
you can automatically receive stereo or monaural sound, depending on  
the broadcast type. If the stereo sound is noisy, select MONO to  
reduce the noise. The word STEREO or SAP is displayed in light blue  
when the TV receives the signal.  
To select desired sound  
Press the MTS button to select the desired sound.  
MONO+SAP broadcasting  
MAIN SOUND  
(MONO)  
MAIN + SAP SOUND  
(MONO)  
SAP SOUND  
STEREO+SAP broadcasting  
MAIN SOUND  
(STEREO)  
SAP SOUND  
MAIN SOUND  
(MONO)  
MAIN + SAP SOUND  
(MONO)  
22  
3I70401D P22-BACK  
22  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound quality  
You can change the sound quality of your TV by adjusting the bass,  
treble, and balance.  
POWER  
TV  
VCR  
CABLE  
CH RTN  
1
4
7
2
5
8
3
6
9
ENT  
To adjust the sound quality:  
1. Press MENU, then press or until the AUDIO menu appears.  
100  
0
CH  
+
CH  
PICTURE AUDIO SET UP OPTION  
VOL  
VOL  
+
BASS  
32  
32  
0
MENU/  
ENTER  
TREBLE  
BALANCE  
BBE  
Menu  
OFF  
CH  
STABLE SOUND ON  
SELECT ADJUST  
EXIT  
RECALL TV/VIDEO FAV  
RESET CAP/TEXT  
1/2  
2. Press L or LLto highlight the item you want to adjust.  
FAV  
3. Press or to adjust the level.  
CODE  
MTS  
SLEEP  
MUTE  
CH  
PICTURE AUDIO SET UP OPTION  
BASS  
32  
32  
0
TREBLE  
BALANCE  
BBE  
OFF  
STABLE SOUND ON  
SELECT ADJUST  
makes the sound quality weaker or decreases the balance in  
the right channel, depending on the item selected.  
makes the sound quality stronger or decreases the balance in  
the left channel, depending on the item selected.  
Note:  
To reset the audio adjustments to the factory  
settings, press RESET.  
Using the BBE feature  
By correcting the phase delay and distortion naturally generated by  
speaker systems, BBE ensures that the sound that reaches your ears  
is as natural as the original SOUND. Human voices are clearer and  
music is natural and well-defined.  
To turn on the BBE sound feature:  
1. Press MENU, then press or until the AUDIO menu appears.  
2. Press L or L to highlight BBE.  
3. Press or to highlight ON.  
CH  
PICTURE AUDIO SET UP OPTION  
BASS  
32  
32  
0
BBE and the BBE symbol are trademarks of  
BBE Sound, Inc.  
Licensed by BBE Sound, Inc. under  
USP4638258 and 4482866.  
Manufactured under license from BBE Sound,  
Inc.  
TREBLE  
BALANCE  
BBE  
ON OFF  
STABLE SOUND ON  
SELECT ADJUST  
To turn off the BBE sound feature:  
Choose OFF in step 3 above.  
23  
3I70401D P22-BACK  
23  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the STABLE SOUND feature  
When the loud sound is made, the stable sound feature automatically  
lower the sound.  
To turn on the STABLE SOUND feature:  
1. Press MENU, then press or until the AUDIO menu appears.  
2. Press L or L to highlight STABLE SOUND.  
3. Press or to highlight ON.  
CH  
PICTURE AUDIO SET UP OPTION  
BASS  
32  
32  
0
TREBLE  
BALANCE  
BBE  
ON  
STABLE SOUND ON OFF  
SELECT ADJUST  
To turn off the STABLE SOUND feature:  
Choose OFF in step 3 above.  
Auto power off  
The TV will automatically turn itself off after approximately 15 minutes if  
it is tuned to a vacant channel or if a station completes its broadcast for  
the day and stops broadcasting on that channel. This feature, however,  
does not work in the VIDEO mode.  
Understanding the Power Return feature  
If the power is cut off while you are viewing the TV and the power is  
resupplied, the Power Return feature will turn the TV on automatically.  
If the power is going to be off for a long time or you are going to be  
away from home for a long time, remove the power plug from the wall  
outlet to prevent the TV from turning on in your absence.  
Appendix  
Cleaning and care  
WARNING:  
TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians.  
To clean the TV screen:  
1. Unplug the TV to avoid possible shock hazard.  
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean  
the TV screen and trim. Do not use too much water because water spills into the cabinet can cause damage to the TV.  
3. Wipe off any excess moisture with a clean dry cloth.  
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.  
Caution:  
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can  
damage the finish of the cabinet.  
24  
3I70401D P22-BACK  
24  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.  
Problem  
Solution  
TV will not turn on  
Make sure the power cord is plugged in, then press POWER.  
The remote control batteries may be dead. Replace the batteries.  
No picture, no sound  
No sound, picture OK  
Check the antenna/cable connections.  
The sound may be muted. Press VOLUME.  
The station may have broadcast difficulties. Try another channel.  
Poor sound, picture OK  
Poor picture, sound OK  
The station may have broadcast difficulties. Try another channel.  
Check the antenna connections.  
The station may have broadcast difficulties. Try another channel.  
Adjust the PICTURE menu.  
Poor reception of broadcast channels  
The station may have broadcast difficulties. Try another channel.  
Check the antenna connections.  
If you are using a VCR, make sure the TV/VCR button is set correctly.  
Cannot receive above channel 13  
Unable to select a certain channel  
Make sure TV/CABLE is set to CABLE mode.  
The channel may be blocked out with the V-Chip feature, or erased  
with the add/erase feature.  
Multiple images  
The station may have broadcast difficulties. Try another channel.  
Use a highly directional outdoor antenna.  
Poor color or no color  
The station may have broadcast difficulties. Try another channel.  
Adjust the TINT and/or COLOR in the PICTURE menu.  
If you change the direction of the TV while it is turned on, the picture  
could suffer from color shading. If so, turn off the TV and allow it to cool  
down for several hours before turning it on again.  
No stereo or SAP sound from a  
known MTS broadcast  
Make sure the MTS feature is set properly.  
The remote control does not operate  
Check if the TV/VCR/CABLE mode is properly set.  
There may be an obstruction between the remote control and the  
remote control sensor.  
The remote control batteries may be dead. Replace the batteries.  
The V-Chip PIN code does not work  
Change or reset your PIN code (see page 14, Selecting a PIN code).  
25  
3I70401D P22-BACK  
25  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
20AF41  
Type 20 (508.0 mm diagonal)  
NTSC standard  
24AF41  
Type 24 (600 mm diagonal)  
Picture Tube  
Television system  
Channel coverage  
VHF: 2 ~ 13  
UHF: 14 ~ 69  
Cable TV: 4A, A-5 ~ A-1, A-I,  
+
+
J ~ W, W 1 ~ W 48  
Power source  
120V AC, 60 Hz  
Power consumption  
Audio power  
105 W  
137 W  
2.5W + 2.5W  
5W + 5W  
Speaker type  
2 x 4-3/4 inches (50 x 120 mm) x 2 pcs.  
Video/Audio terminals  
S-VIDEO INPUT  
Y-INPUT: 1V (p-p), 75 ohm, negative sync.  
C-INPUT: 0.286V (p-p) (burst signal), 75 ohm  
VIDEO/AUDIO INPUT  
VIDEO: 1V (p-p), 75 ohm, negative sync.  
AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)  
ColorStreamTM (component video) INPUT  
Y : 1V (p-p), 75 ohm  
PR : 0.7V (p-p), 75 ohm  
PB : 0.7V (p-p), 75 ohm  
VIDEO/AUDIO OUTPUT  
VIDEO: 1V (p-p), 75 ohm, negative sync.  
AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)  
Dimensions  
Width:  
Height:  
Depth:  
23-1/4 inches (590 mm)  
17-1/2 inches (444 mm)  
19-3/16 inches (487.5 mm)  
Width: 26-3/8 inches (670 mm)  
Height: 20-1/16 inches (509 mm)  
Depth: 18-9/16 inches (471.5 mm)  
Weight  
50.6 Ibs. (23 kg)  
72.7 Ibs. (33 kg)  
Supplied accessories  
Remote control with two size “AAA” batteries  
Design and specifications are subject to change without notice.  
26  
3I70401D P22-BACK  
26  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States warranty  
Toshiba America Consumer Products, Inc. (TACP) and Toshiba Hawaii Inc. (THI) make the following limited warranties.  
These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the  
original consumer purchaser and to no other purchaser or transferee.  
Limited Ninety (90) Day Warranty  
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of ninety (90)  
days after the date of original retail purchase. During this period, TACP and THI will repair a defective product or part,  
without charge to you. You must deliver the entire set to an Authorized TACP/THI Service Station. You pay for all transpor-  
tation and insurance charges for the set to and from the Service Station.  
Limited One (1) Year Warranty  
TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of one year  
after the date of original retail purchase. During this period TACP/THI will replace a defective part without charge to you,  
except that if a defective part is replaced after ninety (90) days from the date of original retail purchase you pay labor  
charges involved in the replacement. You must also deliver the entire product to a TACP/THI Authorized Service Station.  
You are responsible for all transportation for the set to and from the Service Station.  
Limited Two (2) Year Warranty of Picture Tube  
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a period of  
two (2) years after the date of original retail purchase. During this period, TACP/THI will replace a defective picture tube  
without charge to you, except that if a defective picture tube is replaced after ninety (90) days from the date of original  
retail purchase, you pay labor charges involved in the replacement. You are responsible for all transportation and insur-  
ance charges for the set to and from the Service Station.  
Rental units  
The warranty for rental units begins with the first rental of thirty (30) days from the date of shipment to the rental firm,  
whichever comes first.  
Commercial units  
Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube.  
Owners manual and registration card  
You should read this owners manual thoroughly before operating this product. You should complete and mail the en-  
closed registration card within ten days after you, or the person who has given you this product as a gift, purchased this  
product. This is one way to enable TACP/THI to provide you with better customer service and improved products. Failure  
to return the registration card will not affect your rights under this warranty.  
Your responsibility  
The above warranties are subject to the following conditions:  
You must retain your bill of sale or provide other proof of purchase.  
All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.  
These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.  
Labor service charges for set installation, set up, adjustment of customer controls and installation or repair of antenna  
systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your  
responsibility.  
Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product or  
parts which have been lost or discarded by you or to damage to products or parts caused by misuse, accident,  
damage caused by Acts of God, such as lightning or fluctuations in electric power, improper installation, improper  
maintenance or use in violation of instructions furnished by us; or to units which have been modified or had the serial  
number removed, altered, defaced or rendered illegible.  
How to obtain warranty service  
If after following alI of the operating instructions in this manual and checking the section Troubleshooting,you find that  
service is needed;  
Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find the nearest Toshiba  
Authorized Service Station.  
Please present your bill of sale or other proof to the Authorized Service Station.  
27  
3I70401D P22-BACK  
27  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Authorized TACP/THI service station personnel will come to your home when warranty service is required. Depending on  
the type of repair required, the service will either be performed in your home or the set will be taken to the TACP/THI  
Authorized service station for repair and returned to your home at no cost to you.  
In the Continental U.S.  
If your TV requires service, call toll free:  
1-800-631 -3811  
Toll Free  
1-800-631-3811  
In Hawaii  
If your TV requires service, call:  
(808) 521-5377  
327 Kamakee Street, Honolulu, HI 96814  
Limitations  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose,  
are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied  
by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agree-  
ments and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event  
shall TACP or THI be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties  
in any manner whatsoever. The time within which action must be commenced to enforce any obligation of TACP or THI  
arising under this warranty or under any statute, or law of the United States or any state thereof, is hereby limited to 90  
days from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties  
arising under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some  
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or  
limitation of incidental or consequential damages, so the above provisions may not apply to you.  
REV. 9-01-98  
28  
3I70401D P22-BACK  
28  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
3I70401D P22-BACK  
29  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRINTED IN THAILAND  
3I70401D U  
01/07  
23563690  
3I70401D P22-BACK  
30  
16/08/2001, 15:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tech Craft TV Video Accessories ABS32 User Manual
Toshiba TV DVD Combo 36ZP18Q User Manual
Triarch Indoor Furnishings 31020 MP User Manual
Triarch Indoor Furnishings 34115 User Manual
Troy Bilt Tiller 640C User Manual
Universal Remote Control Universal Remote UR5U BH8000 User Manual
Vermont Casting Indoor Fireplace MKWCO33 User Manual
Viking Ventilation Hood VIVC User Manual
Vivotek Security Camera PT71373GPP ISMA User Manual
Vizio Flat Panel Television E390I B1 User Manual