Toshiba Blu ray Player BDX3000KU User Manual

Blu-ray Disc Player  
BDX3000KU  
OWNER’S MANUAL  
Owner’s Record  
The model number and serial number are on the back of the  
unit. Record these numbers in the spaces below. Refer to  
these numbers whenever you communicate with your Toshiba  
dealer about this unit.  
Model number:  
Serial number :  
© 2010 Toshiba Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
CAUTION:  
To prevent direct exposure to laser beam, do not try to open the enclosure.Visible and invisible laser radiation when open and  
interlocks defeated. DO NOT STARE INTO BEAM.  
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation  
exposure.  
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.  
FCC Information  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may  
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  
undesired operation.  
The party responsible for compliance to these rules is:  
Toshiba America Consumer Products, L.L.C.  
82 Totowa Rd. Wayne, NJ 07470.  
Ph: 1-800-631-3811  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
-
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC Radiation Exposure Statement:  
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.  
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.  
This class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
WARNING: Changes or modifications to this unit not expressly approved by Toshiba, or parties authorized by Toshiba, could void  
the user’s authority to operate the equipment.  
Notes On Copyright  
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.  
Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.  
On Placement  
Do not use this unit in places which are extremely hot, cold, dusty or humid.  
Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, or by placing it on  
bedding or carpeting.  
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.  
On Safety  
• Do not handle the AC power cord with wet hands and do not put your fingers or objects into the unit.  
• When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it  
and create a hazard.  
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.  
On Condensation  
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the equipment.  
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before turning  
the power on or gradually heat the room and allow the unit to dry before use.  
On Recycling  
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in  
accordance with your local recycling regulations.  
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
Products that earn the ENERGY STAR® prevent greenhouse gas emissions by meeting strict energy efficiency  
guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and  
the ENERGY STAR mark are registered U.S. marks.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
“Wi-Fi CERTIFIED” logo is  
a registered trademark of  
Wi-Fi Alliance. “Wi-Fi PRO-  
TECTED SETUP” logo is a  
trademark of Wi-Fi Alliance.  
Supplied Accessories  
BONUSVIEW  
“DVD” logo is a trademark  
of DVD Format / Logo  
Licensing Corporation.  
HDMI, the HDMI logo, and  
High-Definition Multimedia  
Interface are trademarks  
or registered trademarks  
of HDMI Licensing LLC in  
the United States and other  
countries.  
Remote Control with  
Batteries (AAA x 2)  
Composite Audio / Video  
Cables  
OWNER’S MANUAL  
Manufactured under license  
from Dolby Laboratories.  
Dolby and the double-D  
symbol are trademarks of  
Dolby Laboratories.  
Owner’s Manual  
(EN)  
Quick Start Guide  
(EN/ES)  
Manufactured under license  
under U.S. Patent #’s:  
5,451,942; 5,956,674;  
5,974,380; 5,978,762;  
6,226,616; 6,487,535;  
7,392,195; 7,272,567;  
7,333,929; 7,212,872 &  
other U.S. and worldwide  
patents issued & pending.  
DTS and the Symbol are  
registered trademarks, &  
DTS-HD, DTS-HD Master  
Audio | Essential and the  
DTS logos are trademarks  
of DTS, Inc. Product  
Symbols Used in this Manual  
To specify for which media type each function is, we put the  
following symbols at the beginning of each item to operate.  
Symbol  
Description  
Description refers to BD-video and BD-RE  
/ BD-R recorded in BDMV format  
Description refers to DVD-video  
includes software. © DTS,  
Inc. All Rights Reserved.  
Description refers to Audio CD / DTS-CD  
“x.v.Color” and “x.v.Color”  
logo are trademarks of Sony  
Corporation.  
Description refers to DVD-RW/-R with  
AVCHD files  
Description refers to BD-RE/-R, DVD-  
RW/-R, CD-RW/-R and SD Memory Card  
with MP3 files  
“AVCHD” and the “AVCHD”  
logo are trademarks of  
Panasonic Corporation and  
Sony Corporation.  
Description refers to BD-RE/-R, DVD-  
RW/-R, CD-RW/-R and SD Memory Card  
with Windows Media™ Audio files  
“BONUSVIEW™”, “BD-  
LIVE™” and “Blu-ray 3D™”  
are trademarks of Blu-ray  
Disc Association.  
Description refers to BD-RE/-R, DVD-  
RW/-R, CD-RW/-R and SD Memory Card  
with JPEG files  
If you do not find any of the symbols listed above under the  
function heading, the operation is applicable to all media.  
Oracle and Java are  
registered trademarks  
of Oracle and/or its  
affiliates. Other names  
may be trademarks of their  
respective owners.  
Trademark Information  
Windows Media and the  
Windows logo are  
“Blu-ray Disc™” and  
Association.  
Blockbuster is a registered trademark of Blockbuster, Inc.  
Netflix is a registered trademark of Netflix Inc.  
Pandora is a registered trademark of Pandora Media, Inc.  
VUDU is a trademark of VUDU, Inc.  
are trademarks of Blu-ray Disc  
trademarks or registered  
trademarks of Microsoft  
Corporation in the United  
States and/or other  
countries.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction  
Accessing a Specific Location Directly.......... 21  
Locating a specific title/chapter/time ......................... 21  
SAFETY PRECAUTIONS .....................................2  
IMPORTANT SAFETY INSTRUCTIONS ............. 2  
PRECAUTIONS ................................................... 3  
Supplied Accessories ....................................... 4  
Symbols Used in this Manual ........................... 4  
Trademark Information ...................................... 4  
Table of Contents ............................................... 5  
Features .............................................................. 6  
Repeating a Title, Chapter,Track or Specific  
Segment ............................................................ 22  
Repeating a title, chapter or track .............................. 22  
Repeating a specific segment ................................... 22  
Playing in a Random Order.............................. 22  
Playing tracks or files in a random order ................... 22  
PIP(BONUSVIEW) Setting................................ 23  
Camera Angle ................................................... 23  
Audio Selection................................................. 23  
Subtitle Selection ............................................. 24  
Displaying On-screen Information.................. 24  
Identification of Controls .................................. 7  
Front panel.................................................................... 7  
Rear panel..................................................................... 7  
Using the Remote Control ................................ 8  
Remote Control............................................................. 8  
Installing batteries......................................................... 9  
Operating with the remote control............................... 10  
Front Panel Display ..................................................... 10  
Playing AVCHD/MP3/WMA/JPEG Files ............25  
Playing files on a data disc......................................... 25  
Using an SD Card ..............................................26  
Inserting an SD card ................................................. 26  
Using a USB Device ..........................................27  
Operating a USB device ............................................ 27  
Connections  
Connecting to a TV .......................................... 11  
Connecting to a TV using an HDMI cable ................... 12  
Connecting to a TV using a component video cable... 12  
Connecting to a TV using an A/V cable....................... 12  
Customizing the Function Settings  
General Operations ...........................................28  
Info Menu............................................................28  
Performing Quick-Setup ...................................28  
Using BD-LiveTM Features ................................28  
Display Setting...................................................29  
Audio Setting .....................................................31  
Speaker Setting .................................................32  
Language Setting ..............................................33  
Parental Control.................................................33  
System Setting...................................................34  
UpgradingYour Player’s Firmware ..................35  
Network Connection Setting ............................36  
Connecting to an Audio System .....................13  
Via 2-Channel Analog Audio Output ........................... 13  
Via Digital Audio Output .............................................. 13  
Via HDMI Audio Output ............................................... 13  
Network Connection .........................................14  
Connecting your player to a wired router .................... 14  
Connecting your player to a wireless access point or  
router........................................................................... 14  
Connecting the Speakers .................................15  
Positioning the Speakers..................................16  
Playback  
Using the Connected Applications .................39  
Watching Movies with Netflix® .................................... 39  
Watching Movies with BLOCKBUSTER® ................... 40  
Watching Movies with VUDU................................... 40  
Listening to Music with PANDORA® ........................... 41  
Information on Playback.................................. 17  
Playable Discs and Files ............................................ 17  
Unplayable Discs and Files........................................ 17  
Color Systems............................................................ 18  
Region Codes ............................................................ 18  
Structure of Disc/SD Card Contents .......................... 18  
Others  
Playing a Disc ................................................... 19  
Troubleshooting & Maintenance ......................42  
Troubleshooting........................................................... 42  
Maintenance .............................................................. 43  
Basic playback ........................................................... 19  
Variable Speed Playback.................................. 20  
Playing in fast reverse / forward directions................. 20  
Playing frame by frame .............................................. 20  
Playing in slow motion ............................................... 20  
Glossary .............................................................44  
Specifications ....................................................46  
Limited Warranty................................................47  
Locating a Desired Section ............................. 20  
Locating a title using the top menu ............................ 20  
Locating a specific chapter or track............................ 21  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Features  
Blu-ray Disc  
x.v.Color  
You can enjoy Blu-ray Disc which is capable of storing five times  
more data than a conventional DVD.  
This unit supports playback of video contents on discs recorded  
with “x.v.Color” technology. To watch this video content with  
the “x.v.Color”, a TV or other display device supporting both  
video image reproduction using the “x.v.Color” standard and  
capable of manually switching it’s color setting is required.  
Please refer to the owner’s manual of your display device for  
further information.  
BD-Java  
With some BDs which support Java applications, you can enjoy  
the interactive functions such as games or interactive menus.  
BD-Live  
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive  
functions to be used when this unit is connected to the Internet  
in addition to the BONUSVIEW function.The various functions  
differ depending on the disc.  
Wi-Fi CERTIFIED  
The Wi-Fi CERTIFIED logo is an assurance that Wi-Fi Alliance  
has tested a product in numerous configurations and with a  
diverse sampling of other devices to ensure compatibility with  
other Wi-Fi CERTIFIED equipment that operates in the same  
frequency band.  
Full high-definition video playback  
Watch movies in the highest picture quality available for your  
HDTV. This unit offers full high-definition video playback up to  
1080p resolution for an amazing viewing experience. A highly  
detailed picture and increased sharpness delivers a more true-  
to-life picture.  
Blu-ray 3D Feature  
This product can play 3D contents through an HDMI cable.  
To implement the 3D effect, connect a 3D device (3D-compliant  
AV receiver, 3D-compliant TV) to the product using an HDMI  
cable, and play the 3D content while wearing 3D vision  
glasses.  
DVD Upconversion for enhanced picture quality  
Your current DVD will look even better than before thanks to  
video upconversion. Upconversion will increase the resolution  
of standard definition DVD to high definition up to 1080p over  
an HDMI connection. The picture will be less jagged and more  
realistic for a near high-definition experience.  
Easy and simple connection to your HDTV via HDMI  
Connect this unit to your HDTV with one single HDMI (High-  
Definition Multimedia Interface) cable. It is recommended to  
use a High Speed HDMI Cable for better compatibility.The high  
definition video output signal will be transferred to your HDTV  
without conversion to analog signals, so you will get excellent  
picture and sound quality.  
Enjoy your content on different kinds of media  
Full backwards compatibility with BD, DVD, CD and SD card  
ensures that you can continue to enjoy your current audio-video  
collection. Additionally, you can view JPEG digital pictures or  
listen to MP3 or Windows Media™ Audio music files.  
Experience rich multi-channel surround sound  
Multi-channel surround sound, which recognizes real-to-life  
sound and makes you feel like you are really there.  
Thanks to other multiple outputs, you can also easily connect  
to your home theater system or amplifier.  
HDMI CEC (Consumer Electronics Control)  
This unit supports HDMI CEC, which allows integrated system  
control over HDMI and is part of the HDMI standard.  
PIP (BONUSVIEW)  
Some BD-videos have the PIP function which enables you to  
display the secondary video in the primary video.You can call  
up the secondary video by pressing BONUSVIEW whenever  
the scene contains the secondary video.  
This function may not work properly on some devices.  
HDMI 1080p/24F output (BD only)  
This unit is equipped with a feature which can provide the  
smooth movement in the playback of film originated material  
with the frame rate of 24 frames per second with progressive  
scan. (Available only when the TV is connected by an HDMI  
cable and compatible with 1080p/24F frame input.)  
Pop-up menu  
Some BD-video have pop-up menu which is a navigation menu  
that can be called up and be operated on theTV screen without  
interrupting the playback.You can call up the pop-up menu by  
pressing POPUP/TOP MENU or MENU.Contents in the pop-up  
menu vary depending on the disc.  
Refer to “Display Setting” in Customizing the Function  
Settingss” on page 29.  
Playback of Content from an SD Memory Card  
Copyright protection system  
You can play back MP3 / WMA / JPEG files stored in an SD  
Memory Card. You can store picture-in-picture commentary,  
subtitles or other extras for BD-ROM ver. 2 (Profile 2.0 / Profile  
1.1) files in an SD Memory Card and play back with the BD-  
video.  
To play back the digital video images of a BD / DVD via an HDMI  
connection, it is necessary that both the unit and the TV (or an  
AV amplifier) support a copyright protection system called HDCP  
(high-bandwidth digital content protection system). HDCP is  
copy protection technology that comprises data encryption and  
authentication of the connected AV device. This unit supports  
HDCP. Please read the operating instructions of your TV (or AV  
amplifier) for more information.  
Playing back AVCHD files  
This unit supports playback of AVCHD format files (new format  
for high definition video camcorders) recorded on disc.Your high  
definition personal archive is playable in HD quality.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identication of Controls  
Front panel  
1
2
3
4* 5* 6* 7*  
8
(*) Notes:  
1. These indicators are located in the sensor field.  
7. ON/STANDBY indicator  
2. When this unit is off, these indicators are dimmed. If a fin-  
ger is brought close to the sensor field, the indicators will  
be invoked and light up.  
When invoked (white), tap to turn on the unit, or to turn  
the unit into the standby mode. (To completely turn off  
the unit, you must unplug the AC power cord.)  
1. Disc tray  
8. SD card slot  
2. Remote sensor  
3. Display  
How to Power OnYour Unit ?  
Refer to “Front Panel Display” on page 10.  
4. OPEN/CLOSE indicator  
When invoked (white), tap to open/close the disc tray.  
5. STOP indicator  
1. Connect to a standard AC outlet to supply power to this  
unit, the ON/STANDBY indicator lights in red and then  
turns white at once.  
2. After about 10 seconds, the ON/STANDBY indicator will  
turn red automatically.  
When invoked (white), tap to stop playback.  
3. Touch the ON/STANDBY button to turn on the unit. The  
ON/STANDBY indicator will remain white (ON mode).  
6. PLAY  
indicator  
When invoked (white), tap to start playback.  
Rear panel  
1
2
3
4
5
6
COMPONENT VIDEO OUTPUT  
SBL  
SBR  
C
SL  
SR  
FL  
FR  
Y
PB  
PR  
AC IN  
SW  
BITSTREAM  
/
PCM  
R
AUDLIO  
VIDEO  
OUTPUT  
ANALOG  
HDMI OUT  
OPTICAL  
MULTI CHANNEL AUDIO OUTPUT  
LAN  
USB  
OUTPUT  
7
8
9
1. AC power cord  
5. COMPONENT VIDEO OUT jacks  
Connect to a standard AC outlet to supply power to this  
unit.  
Use to connect a TV with component video inputs using  
a component video cable.  
Unplug this cord from the AC outlet to completely turn  
off the unit.  
6. MULTI CHANNEL AUDIO OUTPUT jacks  
Use to connect an AV receiver / amplifier with a audio  
cable.  
2. LAN terminal  
Use to connect a network equipment with LAN cable.  
7. USB jack  
Use to connect USB flash drives (not included).  
3. HDMI OUT jack  
Use to connect a TV with an HDMI compatible port via  
an HDMI cable.  
4. OPTICAL jack  
Use to connect an AV receiver / amplifier, Dolby Digital /  
8. AUDIO OUT jacks  
Use to connect a TV, an AV receiver / amplifier or other  
device with a composite audio cable.  
9. VIDEO OUT jack  
Use to connect a TV, an AV receiver or other device with  
a composite video cable.  
DTS decoder or other device with a digital audio optical  
input jack using a digital audio optical cable.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Using the Remote control  
Remote control  
No. Item  
Description  
Press to adjust aspect ratio in full  
stop mode.  
1
2
3
ASPECT  
15  
16  
17  
18  
OPEN/CLOSE  
SETTING  
Press to open or close the disc tray.  
1
2
3
Press to display the settings in  
home menu.  
Press to display the Connected in  
home menu.  
4
HOME MENU  
19  
20  
21  
Press to switch picture-in-picture  
feature on or off (only applicable  
to BD-video which supports the  
PIP function). For more details,  
see “PIP (BONUSVIEW) Setting”  
on page 23.  
4
5
BONUSVIEW  
BONUSVIEW  
5
Same as SKIP  
For detailed operations, please  
refer to SKIP / SKIP  
/ SKIP  
.
/
22  
.
6
7
Press to select a viewing angle if  
multiple angles are available on  
the disc.  
ANGLE  
6
7
VOLUME + / -  
AUDIO  
Press to adjust the volume.  
23  
Press to select the audio mode.  
Press to display the subtitle menu.  
SUBTITLE  
8
9
24  
25  
26  
27  
28  
Press to return to the previous  
menu.  
RETURN  
10  
Press to adjust the brightness of  
display on the front of the Blu-ray  
disc player.  
DIMMER  
11  
12  
• Press to select items on some  
BD contents.  
• When file list / thumbnail list is  
shown, press to switch between  
pages.  
29  
30  
31  
RED / GREEN /  
BLUE /YELLOW  
8
9
13  
14  
During playback, press to fast  
reverse the playback.  
REV  
32  
33  
During playback, press once to  
return to the beginning of the  
current title, chapter, track or file.  
• During playback, press twice  
to return to the previous title,  
chapter, track or file.  
10 SKIP  
During the JPEG playback, press  
to return to the previous file.  
• Press to pause playback.  
Whenplaybackisinpausemode,  
press repeatedly to forward the  
playback step by step.  
11  
12  
PAUSE  
Press to advance one frame.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
• In playback mode, press GOTO,  
then press the number buttons  
to enter a title, chapter, track,  
time or file number.  
• In menu mode, press to enter  
the parental code password.  
Installing batteries  
13 Number buttons  
Install the batteries (AAAx2) matching the polarity indicated  
inside battery compartment of the remote control.  
Press to display the search  
menu.  
14 GOTO  
Open the cover.  
1
Press to turn on the unit, or to turn  
the unit into the standby mode. (To  
completely turn off the unit, you  
must unplug the power cord.)  
15 ON/STANDBY  
• During Blu-ray Disc playback,  
press to open  
a
menu that  
lets you control Blu-ray Disc  
playback.  
16 POPUP/TOP MENU  
• During DVD playback, press  
to open the DVD menu (if  
available).  
Insert batteries.  
In playback mode, press to adjust  
picture quality according to your  
preference (Actual effect to picture  
may vary depending on TV.):  
• E.P.M (Enhanced Picture Mode):  
The picture is sharper with  
enhanced color.  
2
17 PIC  
• Sharpness  
18 INFO  
Press to display disc information.  
Presstoselectthevideoresolution  
in full stop mode.  
19 RESOLUTION  
Make sure to match the + and – on the batteries to the  
marks indicated in the battery compartment.  
Press to return to the previous  
menu.  
20 MENU  
In PIP mode, press to turn the  
audio for the secondary video on  
or off. For more details, see “PIP  
(BONUSVIEW) Setting” on page  
23.  
Close the cover.  
21 2nd AUDIO  
3
/
/
/
Press to select items or settings.  
22  
Press to confirm or select menu  
items.  
OK  
In PIP mode, press to turn the  
subtitle for the secondary video  
on or off.  
23 2nd SUBTITLE  
During playback, press to fast  
forward the playback.  
24 FWD  
Caution: Never throw batteries into a fire.  
Press to start playback or resume  
playback.  
25  
PLAY  
Notes:  
During playback, press to skip to  
the next title, chapter, track or file.  
• Do not mix different battery types or combine used batteries  
with new ones.  
• If the remote control does not operate correctly, or if the  
operating range becomes reduced, replace both batteries  
with new ones.  
26 SKIP  
• During the JPEG playback,  
press to go to the next file.  
27 STOP  
Press to stop playback.  
Press to play back the disc in slow  
motion.  
• If the batteries are dead or if you will not be using the remote  
control for a long time, remove the batteries to prevent battery  
acid from leaking into the battery compartment.  
28  
Press to toggle between various  
repeat modes.  
29 REPEAT  
Press to turn random function on  
or off.  
30 RANDOM  
Press to play back  
a
defined  
31 A-B  
section between point A and B  
repeatedly.  
32 CLEAR  
Press to clear an input error.  
Press to confirm or select menu  
items.  
33 ENTER  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Operating with the remote control  
* Do not expose the remote sensor of the Blu-ray disc player  
to a strong light source such as direct sunlight or other  
illumination. If you do so, you may not be able to operate  
the Blu-ray disc player via the remote control.  
Point the remote control at the remote  
sensor and press the buttons.  
Notes:  
• Direct the remote control at the remote sensor of the Blu-ray  
disc player.  
• When using the remote control, press the buttons at intervals  
of about 1 second to ensure the correct mode of operation.  
• Do not drop or give the remote control a shock.  
• Do not leave the remote control near an extremely hot or humid  
place.  
• Do not spill water or put anything wet on the remote control.  
• Do not open the remote control.  
Distance:  
About 5 m from the  
front of the remote  
sensor.  
Angle:  
• If the remote control is not going to be used for a long time,  
remove the battery to avoid damage caused by battery leakage  
corrosion.  
About 30° in each  
direction of the front of  
the remote sensor.  
Front Panel Display  
1
2
3
4
5
6
7
8
DVD  
TRK 2 c h  
MULTI  
HDMI  
CD  
9
1080ip  
720p  
10  
480ip  
11  
1. PLAY indicator  
Lights when playing.  
2. PAUSE indicator  
Lights when paused.  
10. Resolution indicator  
Shows resolution of video output.  
11. Character indicators  
Displays various kinds of information such as elapsed time  
or message, etc. (See Example shown as below.)  
3. DVD indicator  
Lights when a DVD disc is inserted.  
4. CD indicator  
Indicates the  
elapsed time  
Lights when a CD disc is inserted.  
5. TRK (TRACK) indicator  
Lights when a CD/MP3 disc is inserted.  
Closing the  
disc tray  
6. Audio Channel indicator  
Shows the audio channel of the current DVD/BD.  
Indicates that a  
Blu-ray disc is  
inserted  
7. HDMI indicator  
Lights when HDMI TV is connected.  
8.  
9.  
(REPEAT) indicator  
Illuminates when REPEAT is pressed.  
Loading a disc  
/
SKIP indicator  
Lights while in fast forward / fast reverse mode.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a TV  
Connect the Blu-ray player to your TV.  
1. Choose the appropriate connection, then proceed to the corresponding instruction (A, B or C) on the  
next page.  
Best  
(Supports up to 1080i/1080p, 1080p/24F resolution.)  
Your TV  
HDMI IN  
Go To  
High  
Definition  
TV  
HDMI cable  
Video  
Audio  
A
No analog audio connection required.  
To enjoy the viewing of 3D content, HDMI connection with High Speed HDMI cable must be required.  
HDMI Cable NOT INCLUDED  
Better  
(Supports up to 1080i resolution.)  
COMPONENT  
VIDEO IN  
Y
P
P
B/CB  
R/CR  
Your TV  
component video cable  
Video  
Go To  
High  
Definition  
TV  
B
C
+
L
composite audio cable  
Audio  
AUDIO IN  
R
Component Video Cable NOT INCLUDED  
Basic  
(Supports only 480i resolution.)  
VIDEO IN  
Your TV  
Video  
Go To  
Standard  
Definition  
TV  
L
composite audio video cable  
+
Audio  
AUDIO IN  
R
• Connect this unit directly to the TV. If the composite audio / video cables are connected to a VCR, pictures may be  
distorted due to the copyright protection system.  
Composite Video / Audio Cables INCLUDED  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
2. Connect the cables by following the illustrations below.  
Connecting to a TV using an HDMI cable (Best)  
Your TV  
COMPONENT VIDEO OUT  
SBL  
C
SL  
FL  
FR  
Y
P
B
PR  
AC IN  
SBR  
SW  
SR  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
A
HDMIcable  
HDMI IN  
HDMI OUT  
Notes:  
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector  
are matched.  
• When using non-HDCP compatible TV, the image will not display properly.  
• An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an  
additional audio connection if you are using an HDMI cable.  
Connecting to a TV using a component video cable (Better)  
Your TV  
COMPONENT VIDEO OUT  
SBL  
C
SL  
FL  
Y
P
B
PR  
AC IN  
SBR  
SW  
SR  
FR  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
MULTI CHANNEL AUDIO OUTPUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
B
COMPONENT  
VIDEO IN  
Y
component  
video cable  
PR/CR  
PB/CB  
L
AUDIO IN  
R
COMPONENVIDEO OUT  
Y
P
B
PR  
R
L
ANALOG AUDIO  
OUTPUT  
composite audio cable  
Connecting to a TV using an A/V cable (Good)  
COMPONENT VIDEO OUT  
SBL  
C
SL  
FL  
Y
P
B
PR  
AC IN  
SBR  
SW  
SR  
FR  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
C
VIDEO IN  
Your TV  
R
L
VIDEO  
OUTPUT  
ANALOG AUDIO  
OUTPUT  
L
AUDIO IN  
R
composite audio video cable  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Audio System  
When you change the connections, all devices should be turned off.  
Refer to the manual accompanying external devices for more information.  
Via 2-Channel Analog Audio Output  
Stereo system  
COMPONENT VIDEO OUT  
SBL  
C
SL  
FL  
Y
PB  
PR  
AC IN  
SBR  
SW  
SR  
FR  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
AUDIO IN  
R
L
R
L
ANALOG AUDIO  
OUTPUT  
composite audio cable  
Via Digital Audio Output  
AV receiver / amplifier  
COMPONENT VIDEO OUT  
SBL  
C
SL  
SR  
FL  
FR  
Y
PB  
PR  
AC IN  
SBR  
SW  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
DIGITAL AUDIO INPUT  
OPTICAL  
BITSTREAM/PCM  
OPTICAL  
digital audio optical cable  
Via HDMI Audio Output  
AV receiver / amplifier  
with an HDMI input jack  
COMPONENT VIDEO OUT  
SBL  
SBR  
C
SL  
SR  
FL  
FR  
Y
PB  
PR  
AC IN  
SW  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
HDMI IN  
HDMI cable  
HDMI OUT  
.
Digital Audio Optical Cable and HDMI Cable NOT INCLUDED.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Network Connection  
Your Blu-ray disc player can be connected to your home network:  
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using  
a wired network provides the best performance, because the attached devices connect directly to the network and are  
not subject to radio frequency interference.  
By connecting through the built-in wireless device and a wireless access point or router.  
Connecting your player to a wired router:  
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player  
and to an Ethernet jack on a hub or broadband router.  
Hub or broadband router  
Networking equipment  
(modem, etc.)  
Notes:  
Do not connect a modular  
phonecabletotheETHERNET  
jack.  
WAN  
LAN  
LAN  
When plugging or unplugging  
the cable, hold the connector  
on the end of the cable.When  
unplugging, do not pull on the  
cable.Press down the lock tab  
and pull the connector out of  
the jack.  
5
4
3
2
1
LAN cable  
LAN cable  
Because there are various  
connection configurations,  
follow the instructions from  
your telecommunication carrier  
or Internet service provider.  
Internet  
LAN  
COMPONENT VIDEO OUT  
SBL  
SBR  
C
SL  
SR  
FL  
FR  
Y
PB  
PR  
AC IN  
SW  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
Connecting your player to a wireless access point or router:  
Your Blu-ray disc player has an integrated Wi-Fi device and antenna. No physical connection to the wireless router is  
necessary.  
Configure your player to access the wireless access point or router. For more information, see “Configuring a wireless  
Internet connection” on page 36.  
The network configuration and connection method may vary depending on the equipment in use and the network  
environment. Your Blu-ray disc player is equipped with an IEEE 802.11n wireless module, which also supports the  
802.11 a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certified Wi-Fi  
network (access point or wireless router).  
Notes:  
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n.  
(n is recommended for stable operation of the wireless network.)  
• Wireless LAN, in its nature, may cause interference, depending on the  
use condition (AP performance, distance, obstacle, interference by  
other radio devices, etc.).  
Wireless access point  
Modem Port  
• Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not  
supported.  
Modem Cable  
• When applying the security key for the AP (wireless IP sharer), only  
the following is supported.  
1) Authentication Mode : WPAPSK, WPA2PSK  
2) Encryption Type : WEP, TKIP, AES  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Speakers (For 7.1 Audio Channel)  
You can connect the speakers as shown in the following diagram to obtain the 7.1 audio channels effects. Using the audio  
cables, connect the MULTI CHANNEL AUDIO OUTPUT (SBL, SBR, C, SW, SL, SR, FL & FR) terminals on the rear of  
the Blu-ray disc player to 7.1 Channel ANALOG AUDIO IN terminals of your Amplifier.  
For speaker configuration, please refer to “Speaker Setting” on page 32.  
COMPONENT VIDEO OUT  
SBL  
C
SL  
FL  
FR  
Y
PB  
PR  
AC IN  
SBR  
SW  
SR  
R
L
BITSTREAM  
/
PCM  
VIDEO  
OUT  
LAN  
USB  
HDMI OUT  
OPTICAL  
AUDIO OUT  
MULTI CHANNEL AUDIO OUTPUT  
SBL  
C
SL  
SR  
FL  
FR  
SBR  
SW  
MULTI CHANNEL AUDIO OUTPUT  
7.1 Channel Amplifier  
L
L
L
R
R
R
Notes:  
• Please turn the volume down when you turn on the Amplifier.Sudden loud sound may cause damage to the speakers  
and your ears.  
• The position of terminals may vary depending on the Amplifier. Please refer to the user’s manual of your Amplifier.  
• The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc menu audio  
from certain Blu-ray discs.  
• When connecting to a 5.1 channel home theater or receiver, connect all the MULTI CHANNEL AUDIO OUTPUT jacks  
from the player except for the SBL (Surround Back Left) / SBR (Surround Back Right) outputs.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Positioning the Speakers (For 7.1 Audio Channel)  
How you set up your speakers can affect the bass and the sound field. Note the following points:  
Place speakers on flat secure bases.  
Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with  
thick curtains.  
Keep your speakers at least 10 mm away from the system for proper ventilation.  
Setup example (For 7.1 audio channels)  
Subwoofer  
Front speakers  
Center speaker  
Place the left and right front  
speakers equidistant from the  
center speaker, about 30  
Place the center speaker directly in front of the  
listening area, either above or below the TV.  
Vibration caused by the speaker can disrupt the  
picture if it is placed on directly on the TV.  
o
angle from the center channel.  
Place to the right or left of the  
TV, on the floor or a sturdy  
shelf so that it will not cause  
vibration. Leave about 30 cm  
from the TV.  
Main unit  
To allow for proper ventilation and to maintain  
good airflow around the main unit, position it with  
at least 5 cm of space on all sides.  
AV receiver  
Place the AV receiver directly in front of the  
listening area, either above or below the TV.  
Left & Right Surround speakers  
(may be elevated above  
the listener)  
Surround Back speakers  
(may be elevated above  
the listener)  
Place the left and right surround speakers to the  
left and right side of the listening position, in line  
with or slightly behind the listening position -  
Place the surround back speakers behind the  
listening position - slightly to the left and right -  
at about 140 -150 from the center speaker.  
o
o
o
o
about 90 -110 from the center.  
Note:  
The above setup illustration is a basic overview on what to expect when hooking speakers up to your home theater system. The  
placement may vary depending on how many and what type of loudspeakers you have, as well as your room size, shape, and  
acoustical properties.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Readable cards  
SD Memory Card (8 MB - 2 GB)  
SDHC Memory Card (4 GB - 8 GB)  
miniSD Card (8 MB - 2 GB)  
Playable files/data  
Information on Playback  
MP3, Windows MediaTM  
Audio, JPEG, picture-  
Before you start playing back a disc, read the following  
information.  
in-picture  
commentary,  
subtitles or other extras  
for BD-ROM  
microSD Card (8 MB - 2 GB)  
Playable Discs and Files  
This unit supports SD Memory Card with FAT12/FAT16  
file system, and SDHC Memory Card with FAT32 file  
system.  
This unit is compatible to play back the following discs /  
files.  
This unit does not support NTFS file system.  
This unit may not read the SD Memory Cards formatted  
on a computer. If that is the case, please reformat the SD  
Memory Cards in this unit and try again.  
This unit does not support miniSDHC and microSDHC  
Memory Card.  
To play back a disc / file, make sure that it meets the  
requirements for region codes and color systems as  
described below. You can play back discs that have the  
following logos.  
Other disc types are not guaranteed to play back.  
For miniSD Card and microSD Card, the adapter is  
necessary.  
Playable discs  
Logos  
Blu-ray Disc  
miniSD Card  
microSD Card  
adapter  
- BD-ROM (single / dual layer)  
- BD-RE (single / dual layer)  
(Recorded in BDMV format)  
- BD-R (single / dual layer)(Recorded  
in BDMV format) (Unclosed discs  
may not be played back.)  
adapter  
miniSD Card  
microSD  
Card  
Portions of this product are protected under copyright  
law and are provided under license by ARIS / SOLANA /  
4C.  
Please keep the SD Memory Cards in their cases when  
you are not using them.  
Do not try to open or modify the card.  
Do not touch the terminal surface with your fingers or  
any metals.  
Do not attach additional labels or stickers to cards.  
Do not remove the label of the SD Memory Cards.  
This unit recognizes up to 8 characters of file name in  
the SD Memory Card. Characters after 8th will not be  
displayed.  
DVD-ROM  
DVD-RW  
DVD-R  
CD-DA (audio CD)  
CD-RW  
Unplayable Discs and Files  
CD-R  
The following discs will not be played back in this unit.  
DTS-CD  
-
CD-ROM  
CD-I (compact disc-interactive)  
DVD-RAM  
VSD (video single disc)  
DVD-audio  
HD DVD  
VIDEO CD  
Unfinalized disc  
Playable files  
Media  
AVCHD  
MP3  
DVD-RW/-R  
BD-RE/-R,  
RW/-R,  
DVD-RW/-R,  
Memory  
(including SDHC), miniSD Card,  
microSD Card  
CD-  
Card  
Windows MediaTM Audio  
SD  
SACD  
BD / DVD / SD Memory Card contains DivX® files.  
BD / DVD hybrid disc (played back as a BD-video only)  
BD that contains AVCHD files  
DVD-RW/-R recorded in non compatible recording  
format.  
JPEG  
This unit cannot playback the disc contents protected by  
Windows MediaTM Digital Rights Management (DRM).  
Super Audio CD - Only the sound on the CD layer can be  
heard. The sound on the high-density Super Audio CD  
layer cannot be heard.  
Playability of dual discs are not guaranteed.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Color Systems  
Structure of Disc/SD Card Contents  
BD-video and DVD-video are recorded in different color  
systems throughout the world. The most common color  
system is NTSC (which is used primarily in the United  
States and Canada).  
The contents of BD / DVD / AVCHD are generally divided into  
titles. Titles may be further subdivided into chapters.  
BD / DVD / AVCHD  
title 1  
chapter 1  
title 2  
chapter 2 chapter 1 chapter 2 chapter 3  
Region Codes  
This unit has been designed to play back BD-video with  
region “A” and DVD-video with region “1” or “ALL. You  
cannot play back BD-video or DVD-video that are labeled  
for other regions. Look for the symbols on the right on your  
BD-video or DVD-video.  
Audio CD is divided into tracks.  
audio CD  
track 3  
track 1  
track 2  
track 4  
track 5  
If these region symbols do not appear on your BD-video or  
DVD-video, you cannot play back the disc in this unit. The  
letter or number inside the globe refers to region of the world.  
A BD-video or DVD-video labeled for a specific region can  
only be played back in the unit with the same region code.  
Data discs, USB device, SD Memory Cards containing MP3  
/ WMA /JPEG are divided into folders, and the folders are  
subdivided into files.  
MP3 / WMA / JPEG  
BD-video  
folder (group) 2  
file 4  
folder (group) 1  
file 1  
file 2  
file 3  
file 5  
DVD-video  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION:  
Playing a Disc  
Keep your fingers well clear of the disc tray as it is closing.  
Neglecting to do so may cause serious personal injury.  
This section shows you the basics on how to play a disc.  
Basic playback  
Preparations  
• When you want to view a disc, turn on the TV and select the video input connected to the Blu-ray disc player.  
To start playback in the stop mode  
Press the ON/STANDBY button.  
Press PLAY.  
1
The Blu-ray disc player turns on.  
To pause playback (still mode)  
Press PAUSE during playback.  
To resume normal playback, press the PLAY button.  
Press OPEN/CLOSE.  
• The sound is muted during still mode.  
2
The disc tray opens.  
To stop playback  
Press STOP. The home menu is displayed.  
For Blu-ray discs, press  
OK to start playback at the beginning of the disc.  
/
to select BD-ROM, then press  
Place the disc on the disc tray.  
3
For DVDs/audio CDs, press  
playback.  
PLAY to resume normal  
With the playback side  
down  
• Depending on the disc, playback starts where it stopped  
or at the beginning of the disc.  
• If you press STOP twice, playback stops completely. To  
stat playback again, press  
the beginning of the disc.  
PLAY. Playback starts at  
Press OPEN/CLOSE to close the disc tray.  
4
Playback starts.  
To remove the disc  
Press OPEN/CLOSE.  
If you insert a Blu-ray disc or a DVD that contains  
a top menu, a menu may appear. Use  
to select the title you want to view, then press OK  
to start playback.  
/
/
/
Remove the disc after the disc tray opens  
completely.  
Be sure to press the OPEN/CLOSE button  
to close the disc tray after you remove  
the disc.  
You may need to press the POPUP/TOP MENU or  
MENU button to display disc menu (depending on  
the actual Blu-ray disc or DVD.)  
To turn the power off  
Press ON/STANDBY button to turn the unit off.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Variable Speed Playback  
You can play discs at various speeds, and resume playback from the location where you stopped playback.  
Playing in fast reverse / forward directions  
To resume normal playback  
Press  
or  
during playback.  
Press  
PLAY.  
: Fast forward playback  
: Fast reverse playback  
Notes:  
• The Blu-ray disc player mutes sound and subtitles during  
reverse and forward scan.  
• The playback speed may differ depending on the disc.  
Each time you press this button, the fast-forward  
or fast-reverse speed changes in the following  
sequence:  
Fast x 2  
Fast x 4  
Fast x 8  
Fast x 16  
Fast x 32  
Fast x 64  
Fast x 128.  
Playing frame by frame  
To resume normal playback  
Press  
during still playback.  
Press  
PLAY.  
Each time you press this button, the picture  
advances one frame.  
Note: The sound is muted during frame by frame playback.  
Playing in slow motion  
To resume normal playback  
Press  
during playback.  
Press  
PLAY.  
Each time you press this button, the slow-  
motion speed changes in the following  
sequence:  
Notes:  
• The sound is muted during slow-motion playback.  
• 3 speeds are available.  
Slow x 1/2  
Slow x 1/4  
Slow x 1/8  
Locating a Desired Section  
Normally, Blu-ray discs and DVDs are divided into titles, and the titles are sub-divided into chapters. Audio CDs are divided  
into tracks.You can quickly locate any specific title, chapter, or track.  
Locating a title using the top menu  
Press  
want.  
/
/
/
to select the title you  
Press POPUP/TOP MENU.  
1
2
3
The top menu appears on the TV  
screen.  
If the titles in the top menu are assigned a number,  
you can directly locate a specific title by pressing its  
designated number with the number buttons.  
e.g.  
Press OK.  
Playback starts from Chapter 1 of the selected title.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locating a specific chapter or track  
Press  
or  
repeatedly to access the  
and  
refer to item  
26 and item 10 on page 9 and  
page 8 respectively.  
chapter or track number you want.  
Playback starts from the selected chapter or track.  
You can also press  
or  
To locate succeeding chapters or tracks.  
(shown as in the right  
illustration) on the remote  
control to access the desired  
chapter or track.  
Playback starts from the beginning of the  
current chapter or track.When you press twice  
in quick successions, playback starts from the  
beginning of the preceding chapter or track.  
Note: Some titles may not display chapter numbers.  
Accessing a Specic Location Directly  
Locating a specific title/chapter/time  
Press GOTO.  
(Press GOTO once)  
1
The Goto menu appears on the TV screen.  
Goto Track:  
/ 21 (Current: 10)  
e.g.  
the currently  
playing track  
number  
the desired  
track number  
the total  
track number  
a. Press the GOTO button once:  
(Press GOTO once)  
Goto Title:  
/ 4 (Current: 1)  
Goto File:  
/ 21 (Current: 10)  
the total  
the desired  
title number  
the total  
title number  
the currently  
playing title number  
the desired  
file number  
the currently  
playing file number  
file number  
(Press GOTO twice)  
b. Press the GOTO button twice:  
Goto Time:  
:
:
/ 01:50:46 (Current: 0:05:52)  
Goto Chapter:  
/ 30 (Current: 6)  
the desired time  
(hh:mm:ss)  
the total time  
the elapsed  
time  
the currently  
playing chapter  
number  
the desired  
chapter number  
the total  
chapter number  
Press the number buttons to enter title,  
2chapter (track) number or time.  
While accessing the TIME using number buttons, just  
enter 2 digits in order.  
c. Press the GOTO button for 3 times:  
The first two numbers you entered represent hours.  
The second two numbers you entered represent  
minutes.  
Goto Time:  
:
:
/ 01:50:46 (Current: 0:05:52)  
The third two numbers you entered represent seconds.  
the desired time  
(hh:mm:ss)  
the total time  
the elapsed  
time  
Press the CLEAR button to reset the numbers.  
Press OK.  
3
Playback starts from the selected section.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Repeating a Title, Chapter, Track or Specic Segment  
Repeating a title, chapter or track  
Press REPEAT repeatedly to select the  
desired repeat mode during playback.  
e.g.  
Repeat Off  
Repeat All  
Repeat Off  
Notes:  
The repeat setting will be cancelled when you stop  
playback.  
The chapter, title or track repeat will be cleared when moving  
to another chapter, title, track / file or folder.  
Repeat playback does not function during A-B repeat  
playback.  
Chapter and title repeat are not available with some  
scenes.  
Repeat Off  
Repeat Off  
Repeat Title  
Repeat Chapter  
Repeat Off  
Repeat Off  
Repeat All  
Repeat Track  
When the repeat setting is set for a MP3 or WMA folder (file),  
the repeat setting will be cancelled if you select other MP3 or  
WMA folder (file) to playback.  
Repeat Off  
Repeat All  
Repeat File  
Repeat Off  
Repeating a specific segment  
To resume normal playback  
Press A-B at the desired starting point  
A during playback.  
Press A-B until Repeat Off is displayed.  
1
Notes:  
Repeat A-  
Some discs may not permit A-B repeat operation.  
You can specify a segment only within the current title or  
track.  
Press A-B at the desired ending point B  
during playback.  
2
You cannot set the A-B repeat function for a segment that  
includes multiple camera angles.  
A-B repeat does not function during chapter, title, track or all  
repeat playback.  
Repeat A-B  
The BD player automatically returns to point A and  
starts repeat playback of the selected segment  
(A-B).  
Playing in a Random Order  
Playing tracks or files in a random order  
To resume normal playback  
Press RANDOM repeatedly until “Random Off” is displayed.  
Press RANDOM repeatedly to select  
Random ON during playback.  
Once you turn RANDOM function on, the RANDOM  
indicator will be activated and the system will play all files  
in a random sequence.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIP (BONUSVIEW) Setting  
Some Blu-ray discs have the PIP function which enables you to display the secondary video in the primary video.You can call  
up the secondary video by pressing BONUSVIEW whenever the scene contains the secondary video.See the documentation  
that came with the disc for playback instructions.  
Press BONUSVIEW during playback to  
turn PIP mode on.  
BONUS VIEW  
1
Primary video  
Press 2nd AUDIO to turn the audio for the  
video in the PinP window on or off.  
2
3
Secondary video  
To resume normal playback  
Press BONUS VIEW to turn off the PIP mode.  
Press 2nd SUBTITLE to turn the subtitle  
for the video in the PinP window on or  
off.  
Note: PIP audio cannot be heard unless Bitstream Mixed has  
been selected on the Audio menu. For more information, see  
“Audio Setting” on page 31.  
Camera Angle  
Some BD-video and DVD-video contain scenes which have been shot simultaneously from various angles.  
The selected angle will be displayed on the display bar  
During playback, press ANGLE.  
at the top of the TV screen.  
Angle  
1
1/3  
The first digit indicates the current viewing angle, and  
the second digit indicates the total number of viewing  
angles.  
Press , then use  
/
to select the  
2desired angle.  
Audio Selection  
In the example “01/03 ENG Dolby TrueHD”,  
During playback, press AUDIO.  
“01” indicates the currently selected audio channel.  
“03” indicates the total number of audio channels.  
“ENG” indicates the audio language.  
“DolbyTrueHD” describes the currently selected audio  
format.  
1
Press , then use  
/
to select the  
2
desired audio language and audio  
format.  
Notes:  
The available options of Audio vary from different disc  
format.  
PIP Audio is not available for all discs.It only applies to Blu-ray  
discs that supports picture-in-picture features.  
Audio  
01/03 ENG Dolby TrueHD  
01/03 ENG Dolby TrueHD  
PIP Audio  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Subtitle Selection  
In the example “01/07 ENG”,  
During playback, press SUBTITLE.  
“01” indicates the currently selected subtitle.  
“07” indicates the total number of subtitles.  
“ENG” indicates the subtitle language.  
1
Press , then use  
desired subtitle.  
/
to select the  
2
Notes:  
The available options of Subtitle vary from different disc  
format.  
Subtitle  
01/07 ENG  
NA  
PIP Subtitle is not available for all discs. It only applies to  
Blu-ray discs that support picture-in-picture features.  
PIP Subtitle  
Displaying On-screen Information  
You can check information about the current disc by pressing  
.
On-Screen display  
Disc format  
On-Screen Display  
Title 1 Chapter 1/25  
BD-ROM  
0:02:00  
1:57:35  
Off  
Play  
Play  
Play  
Title 1 Chapter 1/18  
0:02:00  
DVD  
1:57:35  
Off  
Track 1/12  
0:00:20  
CD-DA  
0:05:35  
Off  
Off  
File: 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
Off  
Off  
Play  
0:02:00  
0:30:00  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing AVCHD/MP3/WMA/JPEG Files  
You can play AVCHD, MP3, WMA or JPEG files that have been recorded on a disc on the Blu-ray disc player.  
Playing files on a data disc  
When you insert a data disc containing picture, music, or video files into your player, icons are added to the menu to  
indicate that video, music, or picture files are available for playback.  
If a USB device and a SD card containing music  
are inserted at the same time, the system will  
enter the source selection screen shown as  
below:  
Press OPEN/CLOSE to open the disc  
tray, place a disc that contains video/  
MP3/JPEG files.  
1
A selection menu will appear on the screen.  
Music  
Video  
Music  
USB1  
2 item(s)  
Settings  
Blockbuster  
Netflix  
Main Menu  
Optical Disc  
SDIO  
Connected  
Pandora  
Browse Pictures  
Now Playing  
Vudu  
Music  
Pictures  
For SD card and USB device operation, please  
refer to “Using an SD cardon page 26 and “Using  
a USB Device” on page 27.  
Press  
/
to select the Music or  
2
Pictures, and then press OK.  
(For example: selecting the Music)  
Press  
/
to select the desired MP3 file,  
If no USB device or SD card is inserted, the system  
will directly access the following screen:  
3
4
and then press OK to start playing.  
File: 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
Music  
0:02:00  
0:30:00  
On  
Off  
Play  
Optical Disc  
10 item(s)  
1
2
: Press RANDOM repeatedly to turn random  
playback on or off.  
File  
Information  
Playlist  
Main Menu  
:Press REPEAT repeatedly to select the  
desired repeat mode.  
Play Files  
Browse Pictures  
Now Playing  
To view JPEG picture files while playing  
music files, follow the following steps:  
1. Press RETURN.  
2. Use  
/
to select Browse Pictures, then  
3
4
press OK.  
: displays source (Optical Disc/USB/SD) device name.  
: defines the total number of files that a device contains.  
: shows all files name.  
1
2
3
4
3. Select the desired JPEG file and press OK to  
start viewing.  
: shows the information on the currently selected file.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Slide Show Effects  
Slide Show Delay  
None  
No Delay  
Ok  
Pictures  
Optical Disc  
30 item(s)  
1
2
Main Menu  
Settings  
Main Menu: Returns to the main menu.  
Thumbnail  
Media Menu  
Media Menu: Returns to select the source. This item only  
appears if your optical disc, USB device or SD card is  
inserted.  
Start Slide Show  
Browse Music  
Previous Folder:This item only appears if your optical disc,  
USB device or SD card contains several different picture  
folders.  
Now Playing  
File: 13/30  
3
Start Slide Show: This option enables you to view picture  
(files) one after another automatically.  
4
: displays source (Optical Disc/USB/SD) device name.  
: defines the total number of files that a device contains.  
: shows the currently playing file number.  
1
2
3
4
Browse Music: Goes back to Music folder.  
To stop playing and return to the main  
menu, follow one of the steps described  
below:  
: shows all pictures in thumbnail mode.  
5
Settings: This option enables you to define Slide Show  
Effects (None, Horizontal Scroll, Fade and Shutter) and  
Slide Show Delay (5 Seconds, 2 Seconds, 1 Seconds,  
No Delay, 10 Seconds, 15 Seconds and 30 Seconds).  
After setting, press to highlight Ok and then press OK  
to confirm.  
Press STOP.  
Press RETURN.  
Press , then use  
/
to highlight Main Menu  
and then press OK to confirm.  
Using an SD Card  
This unit supports the use of a Secure Digital (SD) card (not  
included).  
CAUTION:  
Before inserting the SD card, please read carefully the  
relevant information on “Playable Discs and Files” on  
page 17.  
Inserting an SD card  
If no USB device or optical disc containing music or pictures is  
inserted, the system will directly load the data on the inserted  
SD card. Otherwise, it will enter the source selection screen.  
If so, please follow the operation instructions in “Playing files  
on a data disc” on page 25 for details.  
Inserting an SD card fully into the slot  
on the front of Blu-ray disc player until  
it clicks as illustrated.  
1
To pause playback  
Press during playback. To resume normal playback,  
press PLAY.  
To stop playback  
Press STOP.  
SD/SDHC  
Card  
Removing the SD card  
In stop mode, gently push the SD card into the slot and  
then pull it out slowly.  
Press  
and then press OK.  
/
to select Music or Pictures,  
Notes:  
If you cannot easily insert the memory card, you may have  
inserted it incorrectly.Try to turnover the card and then insert  
again. Do not force the memory card into the memory card  
slot.  
2
Do not remove the SD card during playback.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a USB Device  
You can play MP3, WMA or JPEG files that have been stored on USB devices on the Blu-ray disc player.  
Operating a USB device  
To pause playback  
Press during playback. To resume normal playback,  
press PLAY.  
Inserting a USB device into the USB  
slot on the back of Blu-ray disc player  
until it clicks.  
1
To stop playback  
Press STOP.  
Press  
/
to select Video, Music or  
Removing the USB device  
In stop mode, gently pull the USB device out slowly.  
Pictures, and then press OK.  
2
If no optical disc or SD card containing music or  
pictures is inserted, the system will directly load  
the data on the USB device. Otherwise, it will enter  
the source selection screen. If so, please follow the  
operation instructions in “Playing files on a data  
disc” on page 25 for details.  
Notes:  
If you cannot easily insert the USB device, you may have  
inserted it incorrectly. Try to turnover the device and then  
insert again.  
• Do not remove the USB device during playback.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
You can change the default settings to customize performance to your preference.  
3. Follow the on-screen instructions to customize the  
General Operations  
following settings to your preference:  
OSD Language Settings  
Resolution  
1. Press  
/
to select Settings in home menu while in full  
stop mode, the Settings menu appears.  
TV Aspect  
2. Press button, then use  
options.  
/
button to select the setting  
Wireless  
Optical Disc Auto Play  
Screen Saver Duration  
3. Press OK button.  
4. Press  
menu.  
or RETURN button to return to the previous  
4. After setting, press OK to confirm and exit the setup.  
Note: If it is the first time for the player to start up or users  
restore all settings to factory defaults, the system will prompt  
you to perform Quick Setup. Repeat the steps described as  
above to complete the setup.  
Home Menu  
Info  
Quick Setup  
BD-ROM  
Display  
BD-Live  
HDMI Status  
Connected  
1080p(HDMI)  
HDMI Auto  
16:9 Pillarbox  
Off  
HDMI Preferred Format  
Resolution  
Settings  
Display  
TV Aspect  
Using BD-Live™ Features  
Film Mode  
Deep Color  
On  
Audio  
Bluray 3D Mode  
Automatic  
Some (but not all) BD discs contain additional features  
that are made available to players that are connected to  
the internet, and have additional memory added. These  
additional features may include things like:  
Connected  
Speaker  
A
Language  
the ability to download new movie trailers  
additional ‘commentary’ by actors and directors  
multiperson game play and chat  
Settings menu items submenu display area  
In order to access BD-Live functions, the player must be  
properly configured for BD-Live internet access, and it must  
be equipped with additional memory.  
Info Menu  
1. In the main menu of Settings, press button, then use  
This submenu displays the following information:  
/
button to select BD-Live, then press OK.  
Software Version  
Software Date  
Netflix ESN  
BD-Live  
BD-Live Internet Access  
Always Allow Access  
N/A  
1. In the main menu of Settings, press button, then use  
button to select Info to display the software version,  
software date and Netflix ESN.  
BD-Live Storage  
/
Erase Blu-ray Storage  
2. Press or RETURN to go to the previous menu.  
Performing Quick-Setup  
1. In the main menu of Settings, press button, then use  
/
button to select Quick Setup, and then press OK  
to confirm.  
2. Press  
3. Use  
OK to confirm.  
/
to select an option, and then press OK.  
2. Press OK to perform Quick Setup.  
To exit the setup menu:  
/
to select the desired setting, and then press  
• Use button to highlight “No thanks.I’ll go through the  
full setup menu later”, and then press OK.  
• Or press button directly.  
4. Press to go to the previous menu.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Function Settings  
BD-Live Internet Access:  
Display Setting  
Limit Access — Allows Internet access with valid “BD-  
Live” network access approval.  
Always Allow Access — Always allows BD-Live Internet  
access.  
1. In the main menu of Settings, press button to select  
Display, and then press OK to confirm.  
Prohibit Access — Never allows BD-Live Internet  
2. Press  
3. Use  
/
to select an option, and then press OK.  
access.  
/
to select the desired option, and then press  
In order to set the player up for BD-Live Internet Access,  
perform the following steps:  
OK to confirm your selection.  
4. Press to go to the previous menu.  
1. In the main menu of Settings, press button, then use  
/
to select BD-Live, then press OK.  
2. Press  
/
to select “BD-Live Internet Access”, and  
Display  
then press OK.  
3. Use  
/
to select the desired setting, and then press  
HDMI Status  
HDMI Preferred Format  
Resolution  
Connected  
OK to confirm.  
4. Make sure that “Limit Access” or “Always Allow  
1080p  
Access” is checked.  
HDMI Auto  
16:9 Pillarbox  
Off  
5. Once the USB device or SD card has been inserted, if  
there is not at least 100Mbyte of free space on the device,  
you should choose “Erase Blu-ray Storage” from the  
BD-Live setup menu.  
TV Aspect  
Film Mode  
Deep Color  
On  
6. Press to return to the main menu of Settings, then  
Bluray 3D Mode  
Automatic  
use  
/
to highlight Network, and then press OK. (For  
details, please refer to “Network Connection Setting” on  
Page 36.)  
Notes:  
Depending on your connection environment, it may take  
time to connect to the Internet or the Internet may not be  
connected.  
When BD-Live function are used and the unit is  
connected to the Internet, you may be charged for this  
communication.  
HDMI Status:  
This option displays the HDMI status. If an HDMI TV is  
connected, Connected appears. If an HDMI TV is not  
connected, Disconnected appears.  
HDMI Preferred Format:  
Do not remove the USB device or SD card when using  
the BD-Live function.  
This option shows the best HDMI format for the connected  
TV.  
BD-Live Storage:  
Resolution:  
This option is used to tell the BD player whether or not to  
use an inserted SD card or USB device to store BD-Live  
content (movie trailers, additional scenes, etc.).  
You can define the video output resolution in this option. In  
case that the menu of “Resolutionsetting disappears, make  
composite video (yellow) connection to restore it, then select  
the resolution which is compatible with the connected TV.  
In order to add BD-Live memory for BD-Live Internet Access,  
insert an USB device or SD card (1GB is recommended)  
into the USB slot or SD card slot on the player.  
Notes:  
Selecting a resolution the TV does not support could  
result in an unstable picture or loss of the picture. See  
the documentation that came with the TV to find the  
resolutions the TV supports.  
Erase Blu-ray Storage:  
If you choose OK to erase Blu-ray storage, all bookmarks  
and BD-Live content saved in memory are deleted.  
Only the HDMI output on your player supports 1080p  
video output at any frame rate. If the TV is connected  
to the component output, the video output is limited to  
1080i or lower.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
Deep Color:  
TV Type  
Resolution  
This option decides whether to turn off the Deep Color  
(color depth) setting for video signals output from the HDMI  
OUT jack.  
If your TV is a high-definition TV(HDTV)  
connected to the HDMI jack on your  
player and you want your player to set  
the output resolution based on informa-  
tion exchanged between the TV and your  
player over the HDMI cable.  
HDMI Auto  
Connecting the player and a TV that supports Deep  
Color allows more accurate color reproduction than when  
connecting it to a TV that does not support Deep Color. It is  
recommended to set this option Off if the picture is unstable  
or colors appear unnatural.  
If the TV is a high-definition TV (HDTV)  
capable of 1080p (any frame rate) con-  
nected to the HDMI jack on your player  
1080p  
Bluray 3D Mode:  
If your TV is a high-definition TV (HDTV)  
capable of 1080i only  
1080i  
720p  
480p  
480i  
Select whether to play a Blu-ray Disc with 3D contents in  
3D Mode.  
If your TV is a high-definition TV (HDTV)  
capable of 720p only  
Automatic: The 3D Blu-ray disc is played in 3D mode if  
your product detects a TV which supports it. It is played  
in 2D mode if your product detects a TV which can not  
support it.  
If your TV is an enhanced-definition TV  
(EDTV)  
If your TV is a standard-definition NTSC  
TV (American or Asian SD TV)  
Forced 2D:The 3D Blu-ray disc is played in 2D mode at all  
times. Select this option to view a picture without 3D effect  
or when a TV cannot support 3D Blu-ray discs.  
TV Aspect:  
Notes:  
Depending on the type of television you have, you may want  
to adjust the screen setting.  
If you or any viewer experiences the following symptoms  
or any other discomfort from viewing 3D video images,  
stop viewing and contact your health care provider:  
16:9 wide You can view the full 16:9 picture on your  
widescreen TV.  
Convulsions, Eye or muscle twitching, Loss of awareness,  
Altered vision, Involuntary movements, Disorientation,  
Eye Strain, Nausea/Vomiting, Dizziness, Headaches or  
Fatigue  
16:9 Pillarbox — Movie will be displayed in the center of  
the screen and vertical bars will appear on sides of the  
screen.  
Carefully read instructions provided with your display  
and/or 3D glasses before 3D viewing.  
4:3 Pan and Scan — Select when you want to see the  
16:9 video supplied by the Blu-ray Disc/DVD without the  
black bars on top and bottom, even though you have aTV  
with a 4:3 ratio screen.The extreme left and right portion  
of the movie picture will be cut off.  
If you want to enjoy a 3D content, connect a 3D device  
(3D compliant AV receiver orTV) to the product and wear  
a 3D glass before playing the 3D content.  
While watching the 3D video, all analogue component  
and composite signals will be blocked automatically.  
4:3 Letterbox — Select when you want to see full 16:9  
ratio image supplied by a Blu-ray Disc/DVD, even though  
you have a TV with a 4:3 ratio screen. Black bars will  
appear at the top and bottom of the screen.  
All 3D signals are output only using the HDMI cable and  
through the HDMI OUT port.  
As the video resolution in 3D play mode is fixed according  
to the resolution of the original 3D video, you can not  
change the resolution to your preference.  
Notes:  
Depending on the disc type, some aspect ratios may not  
You must use a high-speed HDMI cable for a proper  
output of the 3D signal.  
be available.  
If you select an aspect ratio and option which is different  
from the aspect ratio of yourTV screen, the picture might  
appear distorted.  
You can not use this product for switching a 2D content  
to 3D.  
Film Mode:  
Movies are recorded on film at a rate of 24 pictures (frames)  
per second.Many of the movies on Blu-ray discs are placed  
on the discs at this frame rate.If yourTV supports 24 frames  
per second, but you would prefer viewing the video at a  
higher frame rate, you should turn off Film Mode.Off selects  
a 60 frames/second output format.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Function Settings  
Note: Incorrectly setting the digital audio output’s PCM  
sampling rate too high may result in unpredictable audio  
playback.  
Audio Setting  
The settings in the Audio menu will configure the BD player’s  
digital audio outputs (HDMI or Optical).  
Digital Output:  
PCM Stereo — Sets the output to PCM Stereo if you  
have not an audio receiver connected to your Blu-ray  
disc player or the audio receiver connected to Blu-ray  
disc player is not a 5.1/7.1 channel receiver.  
1. In the main menu of Settings, press button, then use  
/
button to select Audio, then press OK button.  
Bitstream HD — Lets your player send Dolby TrueHD  
or DTS-HD MA bitstreams over HDMI (if your player is  
connected to a compatible HDMI audio receiver). If your  
player is not connected to a compatible HDMI receiver  
(for example, your player is connected directly to the TV  
or your player is connected to an audio receiver using an  
optical cable), a compatible audio signal is automatically  
sent over the HDMI and optical connections. With this  
setting, Blu-ray audio is limited to the soundtrack for the  
main movie (no PIP audio).  
Audio  
PCM Downsampling  
48 kHz  
PCM7.1  
On  
Digital Output  
Dynamic Range Control  
Stereo Downmix  
Auto  
Bitstream Legacy — Sends a DTS or Dolby Digital  
bitstream from the disc over the HDMI and optical  
connections. Blu-ray audio is limited to the soundtrack  
for the main movie (no PIP audio).  
Bitstream Mixed — Sends a mixed (PIP audio and movie  
audio) DTS audio stream over the HDMI and optical  
connections.This mode is primarily intended for use when  
you want to hear both PIP audio and the movie audio.  
2. Press  
3. Use  
/
to select an option, and then press OK.  
/
to select your preferred audio items, and then  
press OK to confirm your selection.  
PCM 5.1 — Sends a PCM audio signal of up to 5.1  
channels over the HDMI connection and up to 2 channels  
over the optical connection.  
4. Press to go to the previous menu.  
PCM Downsampling:  
PCM 7.1 — Sends a PCM audio signal of up to 7.1  
channels over the HDMI connection and up to 2 channels  
over the optical connection.  
If you don’t have a surround sound receiver connected to  
the BD player, you should leave the PCM downsampling  
to 48 kHz, and proceed to the next setup menu item. This  
is true regardless of whether the audio is connected to the  
TV with HDMI or the analog stereo outputs.  
Dynamic Range Control:  
Dynamic Range Control means that you can allow the BD  
player to make the loud parts of a movie’s audio track quieter  
than they would be in the theatre, without making the dialog  
of the actors any quieter.  
If you have a surround sound receiver connected to  
the BD player, and you have connected to the surround  
receiver via the BD player’s analog multichannel audio  
outputs, this setting has no effect on the audio going to the  
analog outputs of the player.Leave the PCM downsampling  
to 48 kHz, and proceed to the next setup menu item.  
This would be useful, for instance, when you want to watch  
a movie in the evening when others might be sleeping.  
Notes: This setup menu item has no effect unless:  
If you have a surround sound receiver connected to  
the BD player, and you have connected to the surround  
receiver via the BD player’s HDMI output, this setting has  
no effect on the audio going to the HDMI output of the player.  
Leave the PCM downsampling to 48 kHz, and proceed to  
the next setup menu item.  
The device playing the disc’s audio (TV or surround audio  
receiver) is connected to the BD player’s analog audio  
outputs; OR  
you have selected “Bitstream Mixed” in the BD player’s  
audio setup menu.  
When Dynamic Range Control is set to Off, movie  
soundtracks are played with the standard dynamic range.  
If you have a surround sound receiver connected to  
the BD player via optical cable, set this menu item to the  
maximum PCM sampling rate that your surround receiver When movie soundtracks are played at low volume or from  
can accept (48 kHz or 96 kHz). If in doubt, consult your smaller speakers, you can set Dynamic Range Control to  
surround receiver’s manual or set to 48 kHz.  
On. Your player applies appropriate compression to make  
low-level content more intelligible and prevent dramatic  
passages from getting too loud.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
Selecting the “Auto” option turns on the Dynamic Range  
Control for all BD movie soundtracks except Dolby TruHD. If  
you have selected a TruHD track on the BD disc, the “auto”  
selection tells the BD player to only turn on dynamic range  
control if information embedded in the TruHD sound track  
tells it to do so.  
Center Speaker:  
If the front speakers have been set to small, the center  
speaker can only be set to ‘Small’ or ‘Off’.  
Setting a speaker to ‘off’ will result in no sound being  
delivered to that speaker.  
Subwoofer:  
Stereo Downmix:  
If you don’t know the crossover frequency of your  
subwoofer, consult the manual for your speaker  
system.  
Select whether to downmix the multi-channel audio into  
fewer channels.  
Auto — Downmixes the multi-channel audio into the  
specific stereo that the connected equipment supports.  
Surround Left & Right Speakers:  
By setting the left surround speaker’s size, the right  
surround speaker’s size is automatically changed to  
match.  
If the front speakers have been set to small, the surround  
speakers can only be set to ‘Small’ or ‘Off’.  
Stereo (LoRo) — Downmixes the multi-channel audio  
into two channel stereo. Choose when the Blu-ray disc  
player is connected to the equipment that does not  
support virtual surround function such as Dolby Pro  
Logic.  
Surround Encoded (LtRt) — Downmixes the multi-  
channel audio into surround compatible stereo. Choose  
when the Blu-ray disc player is connected to the  
equipment that supports virtual surround function such  
as Dolby Pro Logic.  
Rear Left & Right Speakers:  
By setting the left rear speaker’s size, the right rear  
speaker’s size is automatically changed to match.  
If the front speakers have been set to small, the rear  
speakers can only be set to ‘Small’ or ‘Off’.  
4. Use  
/
/
/
to move the highlight box to the Test  
button on the bottom, then press OK. A message will  
appear.  
Speaker Setting  
5. Press  
/
to choose the desired audio signal.You can  
Once the speakers are connected to the system and properly  
configured, you can check to verify that the connections  
to the speakers are correct by running an audio speaker  
test.  
select between Pink, 1kHz Sine and White.  
6. Press OK to begin the speaker test.The audio signal will  
be sent to a different speaker every approximately every  
two seconds.The audio test will highlight which speaker  
is supposed to be getting the sound on the screen.  
To run this test, follow the instructions described as below:  
7. To stop the audio test, press one of the  
buttons.  
/
/
/
1. In the main menu of Settings, press button, then use  
/
button to select Speaker, then press OK.  
8. Press or RETURN to go to the previous menu.  
Note: This setup menu item has no effect unless:  
If you have selected ‘Bitstream Mixed’ in the audio  
menu, these menu choices will have no effect. (Each  
channel’s full audio spectrum will be sent to each speaker,  
regardless of the speaker size selected)  
If you don’t know the type of speakers attached to your  
surround sound system, consult the manual for your  
speaker system.  
2. Use  
/
/
/
to highlight the desired speaker, then  
press OK to enter.  
3. Press to choose the desired audio signal, and then  
/
press OK to confirm.  
Front Left & Right Speakers:  
By setting the front left speaker’s size, the front right  
speaker’s size is automatically changed to match.  
The front speakers can not be turned off. They can only  
be set to ‘Small’ or ‘Large’.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Function Settings  
Notes:  
Language Setting  
Not all languages are available on all discs.  
Some discs do not let you select the subtitle language  
using your player’s menu.Instead, you have to select the  
subtitle language from the disc setup menu (the menu  
that appears after you insert the disc).  
1. In the main menu of Settings, press  
Language, and then press OK.  
/
to select  
You can also select the subtitle language from the subtitle  
menu in the on-screen menu.  
Language  
OSD  
English  
English  
Auto  
Parental Control  
Menu  
Audio  
Subtitle  
1. In the main menu of Settings, press , then press  
/
to select Parental, and then press OK.  
None  
Parental  
Parental Country  
Parental Control  
Parental Level  
USA  
Off  
1 [Kid Safe]  
2. Press  
then press OK.  
/
to select OSD, Menu, Audio or Subtitle, and  
Parental Password  
3. Use  
/
to select your preferred language, and then  
press OK to confirm your selection.  
4. Press to go to the previous menu.  
OSD:  
This option enables you to select the on-screen menu  
language.  
2. Press  
3. Use  
OK to confirm your selection.  
/
to select an option, and then press OK.  
to select the desired option, and then press  
/
Menu:  
This option lets you to select the disc menu language.  
4. Press to go to the previous menu.  
Notes:  
Note: If Parental Control was previously turned On, you will  
be prompted to enter the parental control password before  
being allowed to change these settings. (See “Turning  
parental control on or off” on page 34 for details.)  
Not all languages are available on all discs.  
Most discs only have one menu language.  
Audio:  
You can choose the audio language from this option to your  
preference.  
Selecting the parental country  
Notes:  
Parental Country is fixed in USA.  
Not all languages are available on all discs.  
Some discs do not let you select the audio language  
using your player’s menu.Instead, you have to select the  
audio language from the disc setup menu (the menu that  
appears after you insert the disc).  
Turning parental control on or off  
1. In the main menu of Settings, press , then press  
/
to select Parental, and then press OK.  
Subtitle:  
2. Press  
3. Press  
/
/
to select Parental Control, then press OK.  
to select On or Off, then press OK.  
You can customize your preferred subtitle language in this  
option.  
4. Press to go to the previous menu.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
Setting the parental control level  
System Setting  
1. In the main menu of Settings, press , then press  
/
to select Parental, and then press OK.  
1. In the main menu of Settings, press button, then use  
/
button to select System, then press OK.  
2. Press  
/
to select Parental Level, then press OK.  
to select the rating level you want to block,  
3. Press  
/
then press OK. The rating and all higher ratings will be  
blocked.You can select:  
System  
1 [Kid Safe] — Suitable for all children.  
2 [G] — General audiences.  
Optical Disc Auto Play  
Enable  
Time Zone  
EST (GMT-05:00)  
5 Minutes  
Off  
Screen Saver Duration  
CEC Support  
3 [PG] — Parental guidance suggested.  
4 [PG-13] — Not suitable for anyone under 13.  
5 [PG-R] — Parental guidance recommended.  
Update Via Network  
Restore factory defaults  
6 [R] — Not suitable for anyone under 17 unless  
supervised by a parent or adult guardian.  
7 [NC-17] — Not suitable for anyone under 17.  
8 [Adult] — All BDs and DVDs can be played.  
4. Press to go to the previous menu.  
2. Press  
3. Use  
OK to confirm.  
/
to select an option, and then press OK.  
/
to select the desired setting, and then press  
Setting the parental control password  
1. In the main menu of Settings, press , then press  
/
4. Press to go to the previous menu.  
to select Parental, and then press OK.  
Optical Disc Auto Play:  
2. Press  
/
to select Parental Password, then press  
OK.  
If Enable is selected, it will load data and play back  
automatically when you insert a Blu-ray disc.When Disable  
is selected and if you insert a Blu-ray disc, the disc you can  
select will be displayed on the Settings menu.  
3. Enter a 4-digit number for the parental password, then  
use to highlight Ok, and then press OK to confirm.  
If you forget your password, reset your player to the  
factory defaults. For more information, see “Restore  
factory defaults” on page 35.  
Time Zone:  
This option allows you to select the desired time zone.  
4. Press to go to the previous menu.  
Screen Saver Duration:  
This Blu-ray disc player has a screen saver feature that turns  
the screen black when your player is inactive.You can set the  
interval time you want your player to wait before activating  
the screen saver.  
Note: The unit shuts down automatically in about thirty  
minutes if it remains idle and no activities are made.  
CEC Support:  
This option is used to allow the TV remote control to control  
certain functions of the Blu-ray disc player; and for the Blu-  
ray player to control certain functions of the TV.  
On: Allow mutual control of devices through HDMI.  
Off: Do not allow CEC control.  
Notes:  
Not all TVs are compatible with your Blu-ray disc  
player.  
The default setting is Off. Select On if CEC control is  
necessary.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Function Settings  
Update Via Network:  
This option displays the required storage space if the BD player is connected to internet for upgrade.  
For detailed upgrade operation, please refer to “UpgradingYour Player’s Firmware” on this page.  
Restore factory defaults:  
Choose one of the following 7 options, then press OK to pop up a dialog box, choose Ok in the box, and then press OK  
to confirm.  
To apply the deactivation, please plug off the player after operating deactivation.  
Actions  
Response  
Restore factory settings and deactivate All settings (including Parental Password) will be restored to the factory  
all connected applications  
defaults and all connected applications will be deactivated.  
Restore factory settings  
Restores all settings (including Parental Password) to the factory  
defaults.  
Deactivate all connected applications  
Deactivates all connected applications (Netflix / Pandora / Blockbuster  
/ VUDU)  
Deactivate Netflix  
Deactivate Pandora  
Deactivate Vudu  
Deactivates the connected Netflix application  
Deactivates the connected Pandora application  
Deactivates the connected VUDU application  
Deactivates the connected Blockbuster application  
Deactivate Blockbuster  
Upgrading Your Player’s Firmware  
The company that produced this player may occasionally offer upgrades to the player’s software.  
Automatic upgrades over the Internet  
1. Make sure that your player is successfully connected to the Internet.If new software is available, you will see a message  
prompting you whether to update your firmware.  
2. If you want to update the player’s firmware, use  
/
to highlight “OK”, and then press OK. The software will begin  
downloading, and a status bar will appear on the TV screen.  
3. Once the update is complete, a message will appear indicating that the player will turn itself off and on.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
Network Connection Setting  
Wired IP Settings  
Link Status  
Link up  
MAC Address  
IP Mode  
00:23:18:75:b1:2b  
Dynamic  
1. Press  
/
to select Network in stop mode, then press  
button,  
IP Address  
Subnet Mask  
Gateway  
128.60.3.31  
255.255.0.0  
128.60.1.1  
128.60.1.41  
128.60.1.42  
I. If no Ethernet cable is connected to the ETHERNET  
jack on the back of your player, a screen similar to the  
following appears:  
Primary DNS  
Secondary DNS  
Wireless  
Apply  
Cancel  
Network Test  
Network List  
WiFi Protected Setup (WPS)  
Manual  
3. Press  
/
to select an IP mode.You can select:  
Off — Disables the network interface.  
Manual — Lets you manually configure network settings,  
such as IP address, subnet mask, and gateway settings.  
Dynamic — Uses DHCP to automatically obtain an IP  
address.  
IP Settings  
For detailed operations, refer to the “Configuring a  
wireless Internet connection”.  
4. Press  
/
/
/
to highlight NetworkTest, and press  
OK to test your network connection.  
5. Press or RETURN to go to the previous menu.  
II. If a wired connection is made to your player, a screen  
similar to the following appears:  
Configuring a wireless Internet connection  
Wired IP Settings  
Link Status  
MAC Address  
IP Mode  
Link up  
This section describes how to configure the BD player for  
accessing the internet via aWiFi connection.The procedure  
for connecting to a wireless network depends on various  
network parameters. Read the following configuration  
methods to determine which instructions to use to connect  
to your network.  
00:23:18:75:b1:2b  
Dynamic  
IP Address  
Subnet Mask  
Gateway  
128.60.3.31  
255.255.0.0  
128.60.1.1  
128.60.1.41  
128.60.1.42  
I. Connection to the wireless Network which you  
select  
a. Connecting to an Unencrypted Wireless Network  
b. Connecting to an Encrypted Wireless Network  
Primary DNS  
Secondary DNS  
Apply  
Cancel  
Network Test  
II. Connection to the wireless Network using Wi-Fi  
Protected Setup (WPS)  
a. Connecting to a Wireless Network Using WPS Pushbutton  
b. Connecting to a Wireless Network Using WPS PIN  
Refer to the “Configuring a wired Internet connection”  
for details.  
III.Connection to the wireless Network using Manual  
IP Configration  
Notes:  
“Wireless” and “Wired” are optional and do not appear  
at the same time. Normally, Wireless” is shown without  
wired connection.While using a wired Internet connection,  
“Wireless” is disabled and “Wired” is activated.  
Description of the Wireless Network List Display  
Choosing “Network List” in the wireless network setup  
menu will cause a list of available WiFi networks to appear,  
as shown below:  
Configuring a wired Internet connection  
Network List  
a
WiFi  
WiFi  
WiFi-me*  
Panda  
1. Press  
/
to select Network in stop mode, then press  
button to enter the following screen:  
b g n  
If the network connection is active, Link Up appears next  
to Link Status. If the network connection is not active,  
Link Down displays next to Link Status.  
dlink_media  
NTGR 11g  
Airport_SN  
a
WiFi  
WiFi  
WiFi  
b g  
b g  
2. Press  
/
to select IP Mode, then press OK.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Function Settings  
The symbols that might appear next to each listed wireless  
network in the network list are as follows:  
1. In the “Wireless” menu, press  
/
to select Network  
List, then press OK. A list of existing wireless networks  
near the BD player will appear (It may take several  
seconds for this list to be created). For example:  
Category  
Icon  
Definition  
Connected  
When the BD player is turned on, it  
will connect to the wireless network  
displaying this symbol. Typically,  
this is the last wireless network  
connected before powering down.  
Network List  
a
WiFi  
WiFi  
WiFi-me*  
Panda  
b g n  
Indicates that the BD Player is cur-  
rently connected to this network.  
*
dlink_media  
NTGR 11g  
Airport_SN  
a
WiFi  
WiFi  
WiFi  
Saved  
The wireless network properties  
have been saved in the BD player’s  
memory.  
b g  
b g  
Wireless  
Security  
The wireless network data is not  
encrypted.  
2. Press  
press OK to confirm.  
/
to select the desired wireless network, and  
The wireless network data is  
encrypted; a ‘security key’ must be  
entered so that the BD player can  
share data over the network.  
a. If the BD player is connected to an Unencrypted  
Wireless Network, a menu similar to the following will  
appear:  
The wireless network data is en-  
crypted; the encryption scheme is  
not supported by the BD player.  
WiFi-me  
Wireless  
Protocol  
The wireless network supports  
802.11a  
Connect  
WPS Pin  
Cancel  
a
b
g
n
The wireless network supports  
802.11b  
Name and Password are case-sensitive  
3. Press  
/
to highlight Connect, and press OK. If the  
icon and a message  
The wireless network supports  
802.11g  
wireless network is functioning,  
“Connection to XXX...Success” will appear on the TV.  
The wireless network supports  
802.11n  
4. Press OK to close the message. The BD disc player is  
now connected to the network. From now on, when you  
turn on the player, it will automatically connect to the  
network; there is no need to repeat these steps again.  
The wireless router supports the  
WPS standard.  
Signal  
Strength  
Note: If you do not see this message, the BD player was  
not able to connect to the network.  
Strong Signal  
Good Signal  
Medium Signal  
Weak Signal  
No Signal  
b. If the BD player is connected to an Encrypted  
Wireless Network, a menu similar to the following will  
appear:  
WiFi-me  
Password  
Connect  
WPS Pin  
Cancel  
I. Connection to the wireless Network which you  
select  
Press ENTER to open keyboard  
Password is case-sensitive  
Wireless  
3. Press ENTER to activate the on-screen keyboard.  
Carefully enter the network password by using the  
to highlight the desired letter on the keyboard,  
and then pressing OK. (If you make a mistake, use the  
backspace key to erase the mistake.)  
/
Network List  
/
/
WiFi Protected Setup (WPS)  
Manual  
IP Settings  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the Function Settings  
3. Press the WPS button on the top of your router.  
Done  
1 2 3 4 5 6 7 8 9 0  
4. Once you see “Success” on the button at the bottom of  
the screen, the BD player is connected to the router.  
p
o
q w e r t y u  
i
Note:If you do not see this message, the BD player was not  
able to connect to the network. Repeat steps 1-4 again.  
a s d f g h j k l ;  
b. If the BD player is connected to a Wireless Network  
Using WPS PIN:  
, .  
[ ]  
z x c v b n m  
/
'
Space  
- =  
`
\
2. Press  
/
to select Network List, then press OK. A  
list of existing wireless networks near the BD player will  
appear (It may take several seconds for this list to be  
created). For example:  
Done  
4. Use  
/
/
/
to highlight  
on the upper-right corner  
of the keyboard, and press OK to remove the keyboard  
from the screen.  
Network List  
5. Use  
to highlight Connect, and press OK. If the  
a
WiFi  
WiFi  
WiFi-me*  
Panda  
wireless network is functioning,  
“Connection to XXX...Success” will appear on the TV.  
icon and a message  
b g n  
6. Press OK to close the message. The BD player is now  
connected to the network. From now on, when you turn  
on the player, it will automatically connect to the network;  
there is no need to repeat these steps again.  
dlink_media  
NTGR 11g  
Airport_SN  
a
WiFi  
WiFi  
WiFi  
b g  
b g  
Notes:  
If you do not see this message, the BD player was not  
able to connect to the network.  
3. Press  
press OK to confirm.  
/
to select the desired wireless network, and  
If the wireless network is encrypted using an  
unsupported encryption (it appears in the network  
list with an icon), you cannot connect to the network.  
You must change the router’s encryption type before  
proceeding.  
4. Press  
following screen will appear:  
/
to highlight WPS PIN, and press OK. The  
WiFi-me  
II. Connection to the wireless Network using Wi-Fi  
protected Setup(WPS)  
Password  
1. Press  
/
to select Network in stop mode, then press  
Connect  
WPS Pin  
Cancel  
button to enter the following screen:  
Press ENTER to open keyboard  
Password is case-sensitive  
Wireless  
5. Press  
and press OK.  
/
to highlight connection method you desire,  
Network List  
WiFi Protected Setup (WPS)  
Manual  
6. Follow the on-screen message to continue operating the  
connection.  
IP Settings  
III. Connection to the wireless Network using Manual  
IP Configration  
a. If the BD player is connected to a Wireless Network  
Using WPS Pushbutton:  
1. In the “Wireless” menu, press  
then press OK.  
/
to select Manual,  
2. Press  
/
to select WiFi Protected Setup (WPS), then  
press OK.  
Wireless  
Network List  
WiFi Protected Setup (WPS)  
WiFi Protected Setup (WPS)  
Manual  
Please press the button on your router now  
Network Name (SSID)  
IP Settings  
Cancel  
2. Follow the on-screen message to continue operating the  
connection.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Connected Applications  
Some players are equipped with the capability to watch movies over the internet (from Blockbuster, Netflix or Vudu), or  
to listen to Pandora internet radio.  
Watching Movies with Netflix®  
To use Netflix service, connect this player to your network,  
and make the network settings if they are not finished yet.  
1. Launching Netflix movie  
In Home Menu, press  
, and then press  
/
to select Connected, then use  
to highlight “Netflix”, and then  
/
press OK to enter.  
Video  
4. Preparing Instant Queue  
Settings  
Blockbuster  
Netflix  
To play streaming video via Netflix service, Netflix player  
needs to be activated. Read the instructions displayed on  
your PC. Sign in to your Netflix account, if necessary. Enter  
the activation code displayed on the TV screen.  
Connected  
Pandora  
Vudu  
Music  
Now you can view Netflix streaming video.  
After having activated Netflix player and prepared Instant  
Queue, movies and TV episodes in your Instant Queue  
appear on the TV screen. Select your desired one using  
the remote control of the player. You can control Netflix  
streaming video with the following keys of the remote control  
of this player:  
Pictures  
2. Creating Netflix account  
To start playing movie.  
If you are not a Netflix Member:  
To pause playback while in PLAY mode.  
Select “no”. Read the instructions displayed on the TV  
PC. Sign up to create your account, then select “I’m now  
a member”.  
To stop playing and return to a list of  
movie titles.  
To pause playing movie.  
To start playing while in PAUSE mode.  
To pause playing and open a list of  
scenes. Pressing further proceeds to the  
next scene.  
To pause playing and open a list of  
scenes. Pressing further proceeds to the  
previous scene.  
To stop playing and return to a list of  
movie titles.  
To pause playing and open a list of  
scenes. Fast forward play starts.  
If you are a Netflix Member:  
Select “Yes”.  
To pause playing and open a list of  
scenes. Fast reverse play starts.  
HOME MENU To stop playing and return to Home Menu.  
3. Activating Netflix player  
OK  
To pause playing of Trick play screen  
while in PLAY mode.  
To play streaming video via Netflix service, Netflix player  
needs to be activated. Read the instructions displayed on  
your PC. Sign in to your Netflix account, if necessary. Enter  
the activation code displayed on the TV screen.  
To start playing the movie in case of dur-  
ing Trick play screen.  
Note:Resolution of video streamed from Netflix varies depending  
on communication speed or bitrate of each content, etc.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Using the Connected Applications  
Watching Movies with BLOCKBUSTER®  
This Blu-ray Disc Player enables you to use the following services provided by Blockbuster.  
1. In Home Menu, press  
2. Press , then press  
/
to select Connected.  
/
to highlight Blockbuster, and then press OK to enter Blockbuster main menu.  
Movies : Display movies.  
TV Shows : Display TV Shows.  
Find : Search for a desired movie or TV show by entering it manually.  
My Library : Display a title that you bought or rented.  
My Favorites : Display a title that has been added to My Favorites.  
Configure : Activate or deactivate the Blu-ray Disc Player.  
Help : Get customer service contact information and check the current software version.  
3. If you don’t have a Blockbuster account yet, visit www.blockbuster.com to create your account.  
4. Use to select the Configure, then press OK.  
/
/
/
5. Use the number buttons on the remote control to enter the activation code that is created by the web site, then use  
to highlight Activate, and press OK to confirm.  
When the Blu-ray Disc Player is activated, you will move to the Home page.  
6. Press  
7. Press  
8. Press  
9. Press  
/
/
/
/
to select the Movies or TV Shows, then press OK.  
to select the desired title, then press OK.  
/
/
to select the Rent or Buy, then press OK.  
to select the Submit Order, then press OK. If you want to play any of the titles that your bought, simply  
click Play Now.  
10.Press to go to the previous menu.  
Watching Movies with VUDU™  
Creating a VUDU account on your player  
1. In Home Menu, press  
2. Press , then press  
/
to select Connected.  
/
to highlight Vudu, and then press OK to confirm.  
3. Follow the instructions to create an account, it will ask for an email address.  
4. Enter YOUR email address using the keyboard that appears on the screen. VUDU will then display a message on the  
TV “Sending you an email”.  
Creating a VUDU account on your PC  
1. VUDU will send you an email with a hyper-link; click on the link.  
2. In the Vudu page that comes up on your PC’s browser after clicking the link, enter the e-mail and password of the  
owner of the account.  
3. VUDU will then display a message “Enabling your device to view movies.The email message on yourTV screen  
will disappear when done”.  
4. On your TV, you can now navigate to a Vudu movie, and ‘buy’ or ‘rent’ it.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Connected Applications  
Listening to Music with PANDORA®  
Using an existing Pandora account  
1. In Home Menu, press  
2. Press , then press  
/
to select Connected.  
to highlight Pandora, and then press OK to confirm.  
/
3. Select I have a Pandora account” from the option list.  
4. Sign in with your test account.  
Creating a new account on the BD player  
1. In Home Menu, press  
2. Press , then press  
/
to select Connected.  
to highlight Pandora, and then press OK to confirm.  
/
3. Select I am new to Pandora” from the option list.  
4. You will be given an activation code. Use this activation code to generate a new account and link it to the BD player  
using a PC.  
Creating a new Pandora account on your PC  
Go to http://www.pandora.com/ to create a new account.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting & Maintenance  
Troubleshooting  
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following  
checklist.  
Problem  
Solution  
No power  
- Check if the AC cord is properly connected.  
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.  
No sound or picture  
Distorted picture  
- Check if the connected TV is turned on.  
- Check if the connections are made securely and correctly.  
- Check whether the connected TV or other device supports HDCP. (This unit will  
not output a video signal unless the other device supports HDCP.)  
- Check whether the output format of this unit (HDMI FORMAT) matches the  
supported input format of other connected device.  
- Sometimes a small amount of picture distortion may appear. This is not a  
malfunction.  
- Connect this unit directly to the TV. If the composite audio / video cables are  
connected to a VCR, pictures may be distorted due to the copyright protection  
system.  
Completely distorted picture or black  
/ white picture with BD / DVD  
- Make sure the disc is compatible with this unit.  
No sound or distorted sound  
- Adjust the volume.  
- Check if speakers are connected correctly.  
- Check the HDMI connections.  
- Check the settings in “Audio” menu.  
Picture freezes momentarily during  
playback  
- Check the disc for fingerprints / scratches and clean with a soft cloth wiping from  
center to edge.  
- Clean the disc.  
Disc cannot be played back  
- Clean the disc.  
- Ensure the disc label is facing up.  
- Check if the disc is defective by trying another disc.  
- Cancel the ratings control or change the control level.  
- Insert a correct disc that can be played back on this unit.  
SD Memory Card cannot be read  
- The format of the card does not match that accepted by this unit or the card is not  
compatible.  
No return to start-up screen when  
disc is removed  
- Reset this unit by turning it off, then on again.  
The unit does not respond to the  
remote control  
- Aim the remote control directly at infrared sensor window on the front panel.  
- Reduce the distance to infrared sensor window.  
- Replace the batteries in the remote control.  
- Re-insert the batteries with their polarities (+ / - signs) as indicated.  
Buttons do not work or the unit stops  
responding  
- To completely reset the unit, unplug the AC cord from the AC outlet for 5-10  
seconds.  
The unit does not respond to some  
operating commands during playback  
- Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
The unit cannot read BD / DVD/ CD  
- Dew condensation may form inside the unit. Do not use this unit for at least a few  
hours until its inside gets dry.  
- Wipe the dirt off the disc or replace the disc.  
Angle does not switch  
- The angle cannot be switched for BD / DVD which do not contain multiple angles.  
In some cases multiple angles are only recorded for specific scenes.  
Playback does not start when the title  
is selected  
- Check the settings in “Parental” menu.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting & Maintenance  
Problem  
Solution  
The password for rating level has  
been forgotten  
- If you forget your password, reset your player to the factory defaults and your  
forgotten password will be cleared. For more information, see “Restore factory  
defaults” on page 35.  
Cannot connect to the network  
- Check if the LAN cable connection is properly made.  
- Turn on the modem or broadband router.  
- Check if the broadband router and/or modem is correctly connected.  
- Check the “Network Connection Setting”.  
Cannot connect to the network while  
my PC is connected to the network  
- Check the content of your Internet service contract to see if your Internet service  
provider prevents multiple terminals connecting at the same time.  
Cannot use the BD-Live function  
- Use an SD card with enough space.  
The playback of BD-video or  
download of data does not perform  
properly  
- Check if an SD Card is correctly inserted. Do not remove the card during playback  
as some BD-videos require an SD Card during playback.  
Notes  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details  
on correct operations.  
Some functions are prohibited on some discs.  
Maintenance  
Servicing  
• Please refer to relevant topics on “Troubleshooting & Maintenance” before returning the product.  
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn  
off, unplug the power plug, and please call our helpline to locate an Authorized Service Center.  
Cleaning the cabinet  
• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals  
may discolor the surface or damage the unit.  
Cleaning discs  
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular  
motion.  
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic  
spray intended for analog records.  
Cleaning the disc lens  
• If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this manual, the  
laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the  
laser optical pickup unit.  
Disc handling  
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is not used.  
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not  
attempt to playback such discs, as they may damage the unit.  
IR signal check  
• If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to  
see if it is sending out an infrared signal.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Glossary  
Analog Audio  
DNS Server  
An electrical signal that directly represents sound. Compare A server which translates Internet domain names into IP  
this to digital audio which can be an electrical signal, but is an addresses.  
indirect representation of sound.  
Dolby Digital  
Aspect Ratio  
The system to compress digital sound developed by Dolby  
The width of a TV screen relative to its height.  
Laboratories. It offers you sound of stereo (2ch) or multi-  
Conventional TVs are 4:3 (in other words, the TV screen is channel audio.  
almost square); widescreen models are 16:9 (the TV screen is  
almost twice as wide as it is high).  
Dolby Digital Plus  
Dolby Digital Plus is the next generation digital audio  
compression technology developed as an extension to Dolby  
AVCHD  
AVCHD is a new format for high definition video camcorders Digital. Blu-ray Disc supports 7.1 multi-channel surround  
which can record and play high-resolution HD images.  
sound output.  
BD-Java  
Dolby TrueHD  
With some BD which support Java applications, you can enjoy Dolby TrueHD is a lossless coding technology developed for  
the interactive functions such as games or interactive menus.  
next generation optical discs. Blu-ray Disc supports 7.1 multi-  
channel surround sound output.  
BD-Live  
DTS  
BD-Live is a BD-video (BD-ROM version 2 Profile 2.0/Profile  
1.1) which contains new functions (e.g. Internet connection), in DTS is a multi-channel surround sound system. By connecting  
addition to the BONUSVIEW function.  
to DTS decoder, you can enjoy movie dynamic and realistic  
sound like movie theater. DTS surround sound technologies  
were developed by DTS, Inc.  
Blu-ray 3D  
Blu-ray 3D is a BD-video (BD-ROM version 3 Profile 5.0)  
which contains 3D view function, in addition to the BD-Live/  
BONUSVIEW function.  
DTS-HD  
DTS-HD is a lossless coding technology developed as an  
extension of the original DTS Coherent Acoustics format. Blu-  
ray Disc supports 7.1 multi-channel surround sound output.  
Blu-ray Disc (BD)  
Blu-ray Disc is a next generation optical video disc which is  
capable of storing much more data than a conventional DVD  
Gateway  
is. The large capacity makes it possible to benefit from the IP Address of the electronic devices (such as router) which  
features such as high-definition videos, multi-channel surround provide Internet access.  
sounds, interactive menus and so on.  
HDMI (High-Definition Multimedia Interface)  
Chapter  
A digital interface between audio and video source. It can  
Just as a book is split up into several chapters, a title on a BD- transmit component video, audio, and control signal with one  
video or DVD-video is usually divided into chapters.  
cable connection.  
Hub  
Component Video Output  
A device used for connecting multiple device to the network.  
Each signal of luminance (Y) and component (PB/CB, PR/CR)  
is independent to output so that you can experience picture  
Color as it is.  
Also, due to compatibility with progressive video (525p/480p),  
you can experience higher-density picture than that in interlace  
(525i/480i).  
IP Address  
A set of numbers which are assigned to devices participating  
in a computer network.  
JPEG (Joint Photographic Experts Group)  
Digital Audio  
JPEG is a method of compressing still picture files. You can  
copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD  
Memory Card from a computer and play back the files in this  
unit.  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals (44,100  
times a second for CD audio) by an analog-to-digital converter,  
generating a stream of numbers. On playback, a digital-to-  
analog converter generates an analog signal based on these  
numbers.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
LAN (Local Area Network)  
Virtual Package  
A group of computer networks covering a small area like a The function which copies data to other media (local storage)  
company, school or home.  
from the Internet and play the secondary video, secondary  
audio and the subtitle at the same time. The method of the  
playback varies depending on discs.  
Local Storage  
A storage area of sub contents for playing virtual packages on  
BD-video.  
Windows Media™ Audio  
Windows Media™ Audio is the audio compressing technology  
developed by Microsoft.You can copy Windows Media™ Audio  
files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory  
Card from a computer and play them back on this unit.  
MP3 (MPEG audio layer 3)  
MP3 is a method of compressing files.You can copy MP3 files  
on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card  
from the computer and play back the files on this unit.  
x.v.Color  
“x.v.Color” is a promotion name given to the products that have  
the capability to realize a wide color space based on the xvYCC  
specifications and is a trademark of Sony Corporation.  
PCM (Pulse Code Modulation)  
The most common system of encoding digital audio, found  
on CD and DAT. Excellent quality that requires a lot of data  
compared to formats such as Dolby Digital and MPEG audio.  
For compatibility with digital audio recorders (CD, MD and  
DAT) and AV amplifiers with digital inputs, this unit can convert  
Dolby Digital, DTS, and MPEG audio to PCM.  
Proxy Server  
Proxy server is a server which acts as an intermediary between  
a workstation user and the Internet to ensure security.  
Region Code  
Regions associate discs and players with particular areas  
of the world. This unit will only play back discs that have  
compatible region codes.You can find the region code of your  
unit by looking on the rear panel. Some discs are compatible  
with more than one region (or all regions).  
Router  
A
networking device which distinguishes the IP address  
assigned to each device and routing and forwarding information  
in the computer network.  
Sampling Frequency  
The rate which sound is measured by a specified interval to  
turn into digital audio data. The numbers of sampling in one  
second defines as sampling frequency.The higher the rate, the  
better the sound quality.  
Subnet Mask  
A mask which is used to determine what subnet an IP address  
belongs to.  
Title  
A collection of chapters on BD-video or DVD-video.  
Track  
Audio CD use tracks to divide up the content of a disc.The BD-  
video or DVD-video equivalent is called a chapter. See also  
“Chapter”.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Specications  
General  
Signal system  
NTSC color  
Power requirements  
Power consumption  
Dimensions (width x height x depth)  
Weight  
120 V AC, 60 Hz  
23 W  
430 x 63.5 x 209.7 mm  
1.77 kg  
Operating temperature  
Operating humidity  
41°F (5°C) to 95°F (35°C)  
Less than 80 % (no condensation)  
Terminals  
Video output  
RCA jack  
1 Vp-p (75)  
Y: 1 Vp-p (75)  
Component video output  
RCA jack x 3  
PB/CB: 700 mVp-p (75) PR/CR: 700 mVp-p (75)  
Video: 480i, 480p, 720p, 1080i  
HDMI output  
HDMI jack x 1  
Video: 480i, 480p, 720p, 1080i, 1080p, 1080p/24F / Audio  
Audio output (Analog)  
RCA jack x 2  
L/R: 2 Vrms (output impedance: less than 1k)  
Digital connector  
Audio output (Digital)  
Optical jack x 1  
Multi channel audio output  
RCA jack x 8  
All channels: 2 Vrms (output impedance: less than 1k)  
USB terminal x 1  
LAN terminal  
5V  
500mA  
100BASE-T  
The specifications and design of this product are subject to change without notice.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States Warranty  
Digital Audio Video (“DAV”) Product - Exchange Warranty  
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United  
States.  
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING  
THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR  
TRANSFEREE.  
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT  
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.  
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND  
MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.  
through simultaneous use of this DAV Product and connected  
equipment;or to units that have been modified or had the serial  
number removed, altered, defaced, or rendered illegible.  
(6) This warranty does not cover Product sold AS IS orWITH ALL  
FAULTS.  
Limited Warranty  
TACP warrants this DAV Product and its parts against defects in  
materials or workmanship for a period of ninety (90) days after  
the date of original retail purchase.  
DURINGTHISPERIOD,TACPWILLEXCHANGEADEFECTIVE  
DAV PRODUCT WITH A NEW OR REFURBISHED DAV  
PRODUCT WITHOUT CHARGE TO YOU. DURING THE  
PERIODTHAT COMMENCES ONTHE DATETHAT IS NINETY  
ONE (91) DAYS AFTER THE DATE OF ORIGINAL RETAIL  
PURCHASE AND ENDS ON THE DATE THAT IS THREE  
How to Obtain Warranty Services  
If, after following all of the operating instructions in this manual  
and checking the section “Before Calling Service Personnel,”  
you find that service is needed:  
HUNDRED SIXTY FIVE (365) DAYS AFTER THE DATE OF (1) For instructions on how to obtain warranty service for  
ORIGINAL RETAIL PURCHASE, TACP WILL EXCHANGE A  
DEFECTIVE DAV PRODUCTWITH A NEW OR REFURBISHED  
DAV PRODUCT FOR A FEE.  
your DAV Product under the TACP DAV Product Warranty  
Exchange Program, contact TACP’s Consumer Solutions  
Center toll free at 1-800-631-3811.  
(2) You must include the original bill of sale (or a copy of the  
original bill of sale) or other proof of purchase along with  
the entire DAV Product when sending the DAV Product to  
the TACP Warranty Exchange Center specified by TACP’s  
Consumer Solutions Center. You are responsible for all  
inbound transportation and insurance charges for the DAV  
Product to the TACP Warranty Exchange Center.  
Rental Units  
The warranty for DAV Product rental units begins on the date  
of the first rental or thirty (30) days after the date of shipment  
to the rental firm, whichever comes first.  
Commercial Units  
DAV Products sold and used for commercial purposes have a  
limited warranty for all parts and labor, which warranty begins  
on the date of original retail purchase and ends on the date that  
is ninety (90) days thereafter.  
For additional information, visit TACP’s website:  
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE  
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF  
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE  
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW  
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE  
FOREGOINGWARRANTY IS EXCLUSIVE AND IN LIEU OF ALL  
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND  
OF ALL OTHERWARRANTIES, GUARANTEES, AGREEMENTS,  
AND OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL  
TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL  
DAMAGES (INCLUDING, BUT NOT LIMITEDTO, LOST PROFITS,  
BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE  
OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY  
TO USE THIS DAV PRODUCT).  
Owner’s Manual and Product Registration Card  
Read this owner’s manual thoroughly before operating this DAV  
Product. Complete and mail the enclosed product registration  
com/service as soon as possible. By registering your DAV  
Product you will enable TACP to bring you new products  
specifically designed to meet your needs and help us to contact  
you in the unlikely event a safety notification is required under  
the U.S. Consumer Product Safety Act. Failure to complete  
and return the product registration card does not diminish your  
warranty rights.  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO FOLLOWING  
CONDITIONS:  
(1) You must retain your bill of sale or provide other proof of  
purchase.  
(2) All warranty servicing of this DAV Product must be made pursuant  
to the TACP DAV Product Warranty Exchange Program.  
(3) The warranties fromTACP are effective only if the DAV Product  
is purchased and operated in the Continental U.S.A.or Puerto  
Rico.  
(4) Labor service charges for set installation, setup, adjustment  
of customer controls, and installation or repair of antenna  
systems are not covered by this warranty. Reception  
problems caused by inadequate antenna systems are your  
responsibility.  
(5) Warranties extend only to defects in materials or workmanship  
as limited above, and do not extend to any DAV Product or  
parts that have been lost or discarded by you or to damage to  
the DAV Product or parts caused by fires, misuse, accident,  
Acts of God ( such as lightning or fluctuations in electric  
power), improper installation, improper maintenance, or use in  
violation of instructions furnished byTACP;use or malfunction  
No person, agent, distributor, dealer, or company is authorized  
to change, modify, or extend the terms of these warranties in any  
manner whatsoever. The time within which an action must be  
commenced to enforce any obligation of TACP arising under the  
warranty or under any statute or law of the United States or any  
state thereof is hereby limited to ninety (90) days from the date you  
discover, or should have discovered, the defect.This limitation does  
not apply to implied warranties arising under state law.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND  
YOU MAY ALSO HAVE OTHER RIGHTSWHICH MAYVARY FROM  
STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A.  
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, WHEN AN ACTION MAY BE BROUGHT,  
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, SO THE ABOVE PROVISIONS  
MAY NOT APPLY TOYOU UNDER SUCH CIRCUMSTANCES.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Disclaimer  
I. HEALTH/SAFETY-RELATED  
IMPORTANT SAFETY INFORMATION CONCERNING 3D VIEWING  
• If you or any viewer experiences the following symptoms or any other discomfort from viewing 3D video images, stop viewing  
and contact your health care provider:  
Convulsions  
Altered vision  
Eye Strain  
Eye or muscle twitching  
Involuntary movements  
Nausea/Vomiting  
Fatigue  
Loss of awareness  
Disorientation  
Dizziness  
Headaches  
• Some viewers may experience a seizure or blackout when exposed to certain flashing images or lights contained in certain  
3D television pictures or video games. Anyone who has had a seizure, loss of awareness, or other symptom linked to an  
epileptic condition, or has a family history of epilepsy, should contact a health care provider before using the 3D function.  
• If you feel eye fatigue or other discomfort from viewing 3D video images, stop viewing and take a rest until the condition is  
eliminated.  
• Due to the possible impact on vision development, viewers of 3D video images should be age 6 or above. Children and  
teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised to avoid  
prolonged viewing without rest.  
• Avoid use of the 3D function when under the influence of alcohol.  
• Watching the screen while sitting too close for an extended period of time may cause eye strain. Consult your display manual  
to determine the ideal viewing distance.  
• Viewing in 3D may cause dizziness and/or disorientation for some viewers.Therefore, to avoid injury do not place your player  
or display near open stairwells, balconies, or wires and do not sit near objects that could be broken if accidentally hit.  
• Carefully read instructions provided with your display and/or 3D glasses before 3D viewing.  
II. PERFORMANCE RELATED  
• This product is designed to playback Blu-ray discs that comply with the 3D specifications of Blu-ray Disc Association. It is not  
compatible with other 3D specifications.  
• 3D capable display, 3D eyewear and High Speed HDMI cable (all sold separately) required for playback and viewing 3D  
content.  
• If you route your signal through an AV receiver or other video distribution device they must be 3D capable to support 3D  
viewing. Viewing HD content and up-converting DVD content may require an HDCP capable input on your display device.  
• While up-converting DVD video content may result in a picture that appears to be near HD quality, results may vary depending  
on content, display and settings.  
• 1080p capable display required for viewing content in 1080p.  
• 1080p/24 fps encoded content and an HD display capable of accepting a 1080p/24Hz signal required for viewing 1080p/24  
fps content.  
• Performance of interactive and/or network features may vary due to disc design or content, and may also require an always-  
on broadband internet connection. Firmware update may be required for some interactive and/or network features. Some  
features may require additional bandwidth.  
• BD-Live™ may require an SD or SDHC card or USB memory with available storage capacity of at least 1GB (sold  
separately).  
• VUDU™, Netflix®, BLOCKBUSTER® on Demand, Pandora® and other internet services are available only in the United  
States, and are not provided by Toshiba, may change or be discontinued at any time and may be subject to internet service  
provider restrictions.  
Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third-party  
content or services. Use of third party internet services may require the creation of a separate account through a computer  
with internet access and may require payment of one-time and/or recurring charges. Not all services may be available on or  
compatible with these products.  
• For Dolby® TrueHD and DTS-HD Master Audio | Essential™ playback, content encoded in Dolby® TrueHD and DTS-HD  
Master Audio | Essential™ format required. Supported file types: JPEG, MP3, WMA, and AVCHD. Some recordable media,  
cards or files may not be supported. Deep Color feature as specified in HDMI specification requires compatible Deep Color  
capable HD display and/or device. Use of HDMI-CEC requires an HDMI-CEC compatible display device. Depending on the  
specifications of your display device, some or all HDMI-CEC functions may not work even if your display device is HDMI-CEC  
compatible.  
• Products do not play HD DVD discs.  
• Some features subject to delayed availability.  
• Because the Blu-ray format and 3D specifications use new technologies, certain disc, content, connection and other  
information on the availability of firmware updates that may resolve your problem, or contact Toshiba Customer Solutions.  
• This product includes technology owned by Microsoft Corporation and can not be used or distributed without a license from  
Microsoft Licensing, GP.  
• This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this  
technology outside of this product is prohibited without the appropriate license(s) from Microsoft.  
• While every effort has been made at the time of publication to ensure the accuracy of the information provided herein,  
product specifications, configurations, system/component/options availability are all subject to change without notice.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
END USER LICENSE AGREEMENT  
This End User License Agreement (“EULA”) is a legal agreement between you and Toshiba Corporation (“Toshiba”) with regard  
to the copyrighted Software provided with this EULA. Use of any software and related documentation (“Software”) provided  
with a Toshiba Blu-ray Player, or made available by downloading or otherwise to you by Toshiba in whatever form or media,  
will constitute your acceptance of these terms, unless separate terms are provided by the software supplier or Toshiba in the  
documentation accompanying the Toshiba Blu-ray Player or otherwise, in which case certain additional or different terms may  
apply. If you do not agree with the terms of this EULA, do not use, download, install or copy the Software. If you wish to return  
a complete Blu-ray Player system (hardware and software), contact the retailer where you purchased the Blu-ray Player, and  
comply with the retailer’s standard return policies and procedures.  
Article 1 Definition  
The Software means all programs contained in the Toshiba Blu-ray Player.The copyright of the Software belongs to Toshiba and/  
or its suppliers, including BSQUARE Corporation and/or its suppliers. The Software is protected by copyright laws, Universal  
Copyright Convention, and other laws and conventions related to intellectual property rights. The content of the Software and  
manual is subject to change by Toshiba without notice.  
Article 2 License Grant and Use Conditions  
Toshiba grants to you a personal, non-transferable and non-exclusive right to use the copy of the Software in accordance with  
this EULA. You may permanently transfer all of your rights under this EULA, provided you transfer complete Blu-ray Player  
together with all of the Software, you retain no copies, and the recipient agrees to the terms of this EULA. If the Software is an  
upgrade version, any transfer must include all prior versions of the Software. For maintenance purposes, you may update the  
version of the Software only for the Blu-ray Player that is owned by you.  
Article 3 Prohibited Uses  
Unless otherwise expressly provided in this EULA or the product manual accompanying the Toshiba Blu-ray Player:  
3.1. You may not copy the Software, in whole or in part, without express written permission by Toshiba and/or its  
suppliers.  
3.2. You may not assign, resell, distribute or sublicense the Software or a copy of the Software.  
3.3. You may not create, assign, resell, or sublicense secondary works of the Software without permission.  
3.4. You may not modify, analyze, reverse engineer, decompile or disassemble any part of the Software.  
3.5. You may not combine or incorporate the Software with or into any other application.  
3.6. You may not print the Software.  
Article 4 Disclaimer  
4.1. THE HARDWARE PRODUCT LIMITED WARRANTY IS SET FORTH IN THE DOCUMENTATION ACCOMPANYING THE  
HARDWARE PRODUCT.  
4.2. THE SOFTWARE IS PROVIDED “AS-IS” AND “AS-AVAILABLE,WITHOUT WARRANTIES OF ANY KIND. ALL  
WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, CONTRACTUAL OR STATUTORY, INCLUDING BUT NOT  
LIMITEDTO, ANY IMPLIEDWARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,TITLE  
OR NON-INFRINGEMENT ARE HEREBY WAIVED BYYOU AND DISCLAIMED BY TOSHIBA.THIS EULA REPRESENTS  
THE SOLE AND EXCLUSIVE OBLIGATION OF TOSHIBA AND ITS SUPPLIERS WITH RESPECT TO THE SOFTWARE.  
Article 5 Limitation of Liability  
TO THE MAXIMUM EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT SHALL TOSHIBA AND/OR  
ITS SUPPLIERS BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR  
CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,  
LOSS OF DATA, BUSINESS INTERRUPTION, OR ANY OTHER COMMERNCIAL DAMAGES OR LOSSES, ARISING OUT  
OF OR RELATED TO YOUR USE OR INABILITY TO USE THE SOFTWARE, HOWEVER CAUSED, REGARDLESS OF THE  
THEORY OF LIABILITY (CONTRACT, TORT, OR OTHERWISE) AND EVEN IF TOSHIBA AND/OR ITS SUPPLIERS HAS  
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF  
LIABILITY FOR PERSONAL INJURY, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE  
LIMITATIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. THE AGGREGATE LIABILITY OF TOSHIBA AND  
ITS SUPPLIERS IN CONNECTION WITH THE SOFTWARE, REGARDLESS OF THE FORM OF ANY LEGAL ACTION OR  
PROCEEDING, SHALL BE LIMITED TO DIRECT DAMAGES NOT TO EXCEED THE AMOUNT PAID FOR THE TOSHIBA BLU-  
RAY PLAYER.  
Article 6 Export Control  
Any export, directly or indirectly, of the Software in contravention of the United States Export Administration Regulations, or any  
other applicable law, regulation, or order, is prohibited.  
Article 7 Termination of License  
In the event that you fail to comply with any of the terms and conditions contained herein, Toshiba shall have the right to  
immediately terminate this Agreement without any notification to you. Upon termination of this Agreement, you shall cease all  
use of the Software and destroy all copies, in whole and/or in part.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Article 8 Governing Law  
This EULA is governed by the laws of Japan, without references to the conflict of laws principles. Any and  
all disputes arising hereunder shall be resolved exclusively by the Tokyo District Court, Japan, and you hereby  
consent to the exclusive jurisdiction of such court.  
Article 9 Severability  
If any provision of this EULA shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability  
of the remaining provisions hereof shall not in any way be affected or impaired.  
(C) 2001-2010 Toshiba Corporation  
The Software contains Macromedia® [Flash®] [Flash Lite™] technology of Adobe Systems Incorporated.  
Copyright© 1995-200[7] Adobe Systems Incorporated. All rights reserved. Macromedia, Flash, Macromedia  
Flash, [and Macromedia Flash Lite] are trademarks or registered trademarks of Adobe Systems Incorporated in  
the United States and other countries.  
License information on the software used in the TOSHIBA BD player  
This document is statement purpose only. Not concerned with operation of this product.  
The software pre-installed in the TOSHIBA BD player consists of multiple, independent software components. Each software  
component is copyrighted by TOSHIBA or a third party.  
The TOSHIBA BD player uses software components that are distributed as freeware under a third-party end-user license  
agreement or copyright notice (hereinafter referred to as a “EULA”).  
Some EULAs require that the source code of the applicable component be disclosed as the condition for distributing the software  
component in executable format. You can check the software components subject to such EULA requirements on the following  
phone number:  
Phone number: 1-800-631-3811  
TOSHIBA provides a warranty for the TOSHIBA BD player you have purchased under conditions set forth by TOSHIBA.  
However, some of the software components distributed under an EULA are made available for use by the user on the assumption  
that they are not copyrighted or warranted by TOSHIBA or any third party. These software components are licensed to the user  
free of charge and therefore not covered by any warranty within the scope of the applicable laws. These software components  
are not subject to any copyrights or other third-party rights and are provided in “as is” condition without any warranty, whether  
express or implied. “Warranty” here includes, but not limited to, an implied warranty for marketability or fitness for specific uses.  
All risks associated with the quality or performance of these software components are assumed by the user. TOSHIBA shall not  
be liable whatsoever for any cost of repair or correction or other incidental expense incurred in connection with a defect found in  
any of these software components. Unless specified under the applicable laws or in a written agreement, a party who changes  
or redistributes the software with consent from the copyright holders or based on the aforementioned licenses shall not be held  
liable whatsoever for any loss arising from the use of or inability to use such software components.The same applies even when  
the copyright holders or relevant third parties have been informed of the possibility of such loss. “Loss” here includes normal,  
special, incidental and indirect loss (including, but not limited to, the loss of data or its accuracy; loss incurred by the user or any  
third party; and interface incompatibility with other software). Please read each EULA for details on the use conditions and items  
that must be observed regarding these software components.  
The table below lists the software components pre-installed in the TOSHIBA BD player, which are subject to EULAs. The user  
should read the applicable EULAs carefully before using these software components. The EULAs are exhibited in their original  
text (English) as exactly written by the respective parties other than TOSHIBA.  
Open-Source Third-party Software Included in the BD-Player (as of Feb 2010):  
Software  
License (*= source must be distributed on request)  
A copy of the GPL2.0 license is provided in Appendix K  
A copy of the LGPL2.1 license is provided in Appendix L  
*backtrace  
*directfb-extra  
*cairo  
GPL2 (Included in DVD 3.x [7630 systems] only)  
GPL2  
LGPL2  
LGPL2  
LGPL2  
*directfb  
*iconv  
openssl  
BSD-old dual license.  
The terms and conditions which apply to this software are provided in Appendix H.  
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit  
(http://www.openssl.org)  
curl  
The terms and conditions which apply to this software are provided in Appendix A.  
*freetype  
The terms and conditions which apply to this software are provided in Appendix G.  
Recommended advertisement is:  
Portions of this software are copyright © <year> The FreeType  
Project (www.freetype.org). All rights reserved.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
jpeg  
expat  
mng  
png  
xml  
The terms and conditions which apply to this software are provided in Appendix B.  
The terms and conditions which apply to this software are provided in Appendix I.  
The terms and conditions which apply to this software are provided in Appendix C.  
The terms and conditions which apply to this software are provided in Appendix D.  
The terms and conditions which apply to this software are provided in Appendix E.  
The terms and conditions which apply to this software are provided in Appendix F.  
BSD-new  
zlib  
Elecktra  
Ltdl  
LPGL  
Open-Source Third-party Software Included in the Kernel/Rootfs: (as of Feb 2010)  
(*= source must be distributed on request)  
A copy of the GPL license is provided in Appendix K  
A copy of the LGPL license is provided in Appendix L  
Utility  
Base Version  
License  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
zlib license  
*kernel  
*arp  
net-tools-1.52  
GNU Bash-3.2  
busybox-1.11.1  
cramfs  
*bash  
*busybox  
*cramfsck  
*dhcpcd  
*e2fsprogs  
*fdisk  
dhcpcd-1.3  
e2fsprogs-1.41.5  
fdisk-2.10m  
TinyLogin-0.80  
sysutils  
*getty  
*hostnamesysutils  
*ifconfig  
*kill  
net-tools-1.52  
sysutils  
*mkcramfs  
*ntfs-3g  
cramfs  
ntfs-3g 2009.4.4  
TinyLogin-0.80  
sysutils  
*passwd  
*ps  
*route  
net-tools-1.52  
sfdisk-3.07  
*sfdisk  
*shutdown  
*tinylogin  
*hotplug  
*utelnetd  
*procps  
sysutils  
TinyLogin-0.80  
hotplug-1.8  
utelnetd-0.1.3  
procps-3.2.8  
freetype-2.1.2  
GNU Bash-2.05  
GNU termcap 1.3  
zlib-1.2.3  
*libfreetype.so.6.3.  
*libtermcap.so  
*libtermcap.so.2.0.8  
zlib  
The terms and conditions which apply to this software are provided in Appendix F.  
libusb.so  
uClibc  
libusb-0.1.12  
LGPL 2.1  
LGPL 2.1  
BSD-new  
uClibc-nptl-0.9.29-20070423  
tcpdump-4.0.0  
tcpdump  
The terms and conditions which apply to this software are provided in Appendix M.  
strace strace 4.5.18  
The terms and conditions which apply to this software are provided in Appendix M.  
hdparm hdparm-6.9  
The terms and conditions which apply to this software are provided in Appendix M.  
libpcap libcap-1.0.0  
The terms and conditions which apply to this software are provided in Appendix M.  
portmap portmap  
BSD-new  
BSD-new  
BSD-new  
BSD-old  
The terms and conditions which apply to this software are provided in Appendix J.  
Advertising sentence is:  
Copyright (c) 1990 The Regents of the University of California. All rights reserved.  
openssl 0.9.8k BSD-old. See advertisement notice above.  
openssl  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
pata_platform.ko  
GPL  
scsi_wait_scan.ko  
Badblocks  
compile_et  
e2fsck  
GPL  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.1  
GPL2.1  
GPL2.1  
Unique license  
Unique license  
flash_erase  
flash_eraseall  
flash_info  
fsck  
geneccerror  
hdparm  
hotplog  
libcom_err  
libe2p  
libext2fs  
libgcc_s  
libnandutils  
libproc  
nanddump  
nandwrite  
netstat  
ntpdate  
top  
tune2fs  
ubiattach  
ubicrc32  
ubidetach  
ubiformat  
ubimkvol  
ubinfo  
ubinize  
ubirename  
ubirmvol  
ubiupdatevol  
vmstat  
libusb-config  
libusbpp  
libuuid  
Tip  
Unzip  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Luxi Font Copyright  
Luxi fonts copyright (c) 2001 by Bigelow & Holmes Inc. Luxi font instruction code copyright (c) 2001 by URW++ GmbH. All Rights Reserved. Luxi is  
a registered trademark of Bigelow & Holmes Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of these Fonts and  
associated documentation files (the “Font Software”), to deal in the Font Software, including without limitation the rights to use, copy, merge,  
publish, distribute, sublicense, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so,  
subject to the following conditions:  
The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software.  
The Font Software may not be modified, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may not be modified  
nor may additional glyphs or characters be added to the Fonts. This License becomes null and void when the Fonts or Font Software have been  
modified.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT,  
PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++ GMBH. BE LIABLE FOR ANY CLAIM,  
DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,  
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT  
SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.  
Except as contained in this notice, the names of Bigelow & Holmes Inc. and URW++ GmbH. shall not be used in advertising or otherwise to promote  
the sale, use or other dealings in this Font Software without prior written authorization from Bigelow & Holmes Inc. and URW++ GmbH.  
For further information, contact:  
Appendix A - CURL license  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright  
notice and this permission notice appear in all copies.  
THE SOFTWARE IS PROVIDED „AS IS“, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY  
RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE  
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other  
dealings in this Software without prior written authorization of the copyright holder.  
Appendix B - JPEG License  
LEGAL ISSUES  
============  
In plain English:  
1. We don’t promise that this software works. (But if you find any bugs, please let us know!)  
2. You can use this software for whatever you want. You don’t have to pay us.  
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that  
you’ve used the IJG code.  
In legalese:  
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy,  
merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and you, its user, assume the entire risk as to its quality  
and accuracy.  
This software is copyright (C) 1991-1998, Thomas G. Lane.  
All Rights Reserved except as specified below.  
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these  
conditions:  
(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice  
unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.  
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based in part on the work of the  
Independent JPEG Group”.  
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept  
NO LIABILITY for damages of any kind.  
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought  
to acknowledge us.  
Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating to this software or products  
derived from it. This software may be referred to only as “the Independent JPEG Group’s software”.  
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are  
assumed by the product vendor.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Appendix C - MNG License  
/* **************************************************************************************************************************************************  
COPYRIGHT NOTICE:  
Copyright (c) 2000 Gerard Juyn ([email protected])  
[You may insert additional notices after this sentence if you modify this source]  
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:  
Gerard Juyn  
The MNG Library is supplied “AS IS”. The Contributing Authors disclaim all warranties, expressed or implied, including, without limitation, the  
warranties of merchantability and of fitness for any purpose. The Contributing Authors assume no liability for direct, indirect, incidental, special,  
exemplary, or consequential damages, which may result from the use of the MNG Library, even if advised of the possibility of such damage.  
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the  
following restrictions:  
1. The origin of this source code must not be misrepresented; you must not claim that you wrote the original software.  
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.  
3. This Copyright notice may not be removed or altered from any source or altered source distribution.  
The Contributing Authors specifically permit, without fee, and encourage the use of this source code as a component to supporting the MNG and  
JNG file format in commercial products. If you use this source code in a product, acknowledgment would be highly appreciated.  
Parts of this software have been adapted from the libpng package. Although this library supports all features from the PNG specification (as MNG  
descends from it) it does not require the libpng package. It does require the zlib library and optionally the IJG jpeg library, and/or the “little-cms”  
library by Marti Maria (depending on the inclusion of support for JNG and Full-Color-Management respectively.  
This library’s function is primarily to read and display MNG animations. It is not meant as a full-featured image-editing component! It does however  
offer creation and editing functionality at the chunk level. (future modifications may include some more support for creation and or editing)  
*/  
Appendix D - PNG License File Distribution Clause  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to  
supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be  
appreciated.  
Appendix E – XML License  
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a similar licence but with  
different Copyright notices) all the files are:  
Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”),  
to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or  
sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL  
THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT  
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE  
SOFTWARE.  
Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other  
dealings in this Software without prior written authorization from him.  
Appendix F – zlib Distribution Conditions  
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from  
the use of this software.  
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely,  
subject to the following restrictions:  
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a  
product, an acknowledgment in the product documentation would be appreciated but is not required.  
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.  
3. This notice may not be removed or altered from any source distribution.  
Jean-loup Gailly  
Mark Adler  
If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but  
without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code.  
If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes.  
Please read the FAQ for more information on the distribution of modified source versions.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix G – Freetype License  
The FreeType Project LICENSE  
----------------------------  
2006-Jan-27  
Copyright 1996-2002, 2006 by  
David Turner, Robert Wilhelm, and Werner Lemberg  
Introduction  
============  
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools  
and contributions which rely on, or relate to, the FreeType Project.  
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType  
font engine, the test programs, documentation and makefiles, at the very least.  
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software  
in commercial and freeware products alike. As a consequence, its main points are that:  
o
o
o
We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’ distribution)  
You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’ usage)  
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your  
documentation that you have used the FreeType code. (`credits’)  
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products.We disclaim all warranties  
covering The FreeType Project and assume no liability related to The FreeType Project.  
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the  
following text:  
“””  
Portions of this software are copyright © <year> The FreeType Project (www.freetype.org). All rights reserved.  
“””  
Please replace <year> with the value from the FreeType version you actually use.  
Legal Terms  
===========  
0. Definitions  
--------------  
Throughout this license, the terms `package’, `FreeType Project’, and `FreeType archive’ refer to the set of files originally distributed by the authors  
(David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be they named as alpha, beta or final release.  
`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s source code as well as  
linking it to form a `program’ or `executable’. This program is referred to as `a program using the FreeType engine’.  
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise  
stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by  
this license, you must contact us to verify this.  
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified  
below.  
1. No Warranty  
--------------  
THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF  
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE  
FREETYPE PROJECT.  
2. Redistribution  
-----------------  
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create  
derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any  
purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions:  
o
Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes to the original files must be  
clearly indicated in accompanying documentation.The copyright notices of the unaltered, original files must be preserved in all copies of source  
files.  
o
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in  
the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn’t  
mandatory.  
55  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must  
acknowledge us. However, no fee need be paid to us.  
3. Advertising  
--------------  
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without  
specific prior written permission.  
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising  
materials: `FreeType Project’, `FreeType Engine’, `FreeType library’, or `FreeType Distribution’.  
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license,  
or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the  
FreeType Project, you indicate that you understand and accept all the terms of this license.  
4. Contacts  
-----------  
There are two mailing lists related to FreeType:  
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution.  
If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.  
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.  
Our home page can be found at  
--- end of FTL.TXT ---  
Appendix H – Openssl License  
LICENSE ISSUES  
==============  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the  
toolkit.  
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to  
OpenSSL, please contact [email protected].  
OpenSSL License  
---------------  
/* ====================================================================  
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:This product includes software  
developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”  
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without  
prior written permission. For written permission, please contact [email protected].  
5. Products derived from this software may not be called “OpenSSLnor may “OpenSSLappear in their names without prior written permission *  
of the OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL  
Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  
IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE  
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson  
*/  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Original SSLeay License  
-----------------------  
/* Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with  
Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to  
all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this  
distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric  
Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or  
in documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes  
cryptographic software written by Eric Young ([email protected])”  
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).  
4. IfyouincludeanyWindowsspecificcode(oraderivativethereof)fromtheappsdirectory(applicationcode)youmustincludeanacknowledgement:  
“This product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN  
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS  
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be  
copied and put under another distribution licence [including the GNU Public Licence.]  
*/  
Appendix I – Expat License  
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat  
maintainers.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”),  
to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or  
sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL  
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION  
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER  
DEALINGS IN THE SOFTWARE.  
Appendix J – Portmap License  
/*-  
Copyright (c) 1990 The Regents of the University of California. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes  
software developed by the University of California, Berkeley and its contributors.  
4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software  
without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
*/  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Appendix K – GNU GPL 2.0  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is  
intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public  
License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free  
Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the  
freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that  
you can change the software or use pieces of it in new free programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These  
restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have.You must  
make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute  
and/or modify the software.  
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the  
software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems  
introduced by others will not reflect on the original authors’ reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will  
individually obtain patent licenses, in effect making the program proprietary.To prevent this, we have made it clear that any patent must be licensed  
for everyone’s free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under  
the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means  
either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or  
with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each  
licensee is addressed as “you”.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the  
Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of  
having been made by running the Program). Whether that is true depends on what the Program does.  
1.You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License  
and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2.You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such  
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be  
licensed as a whole at no charge to all third parties under the terms of this License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the  
most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else,  
saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of  
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is  
not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be  
reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when  
you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the  
distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each  
and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right  
to control the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of  
a storage or distribution medium does not bring the other work under the scope of this License.  
3.You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections  
1 and 2 above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2  
above on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing  
source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2  
above on a medium customarily used for software interchange; or,  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for  
noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection  
b above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code  
means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and  
installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed  
(in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,  
unless that component itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the  
source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along  
with the object code.  
4.You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy,  
modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have  
received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.  
5.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the  
Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the  
Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,  
distributing or modifying the Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original  
licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the  
recipients’ exercise of the rights granted herein.You are not responsible for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions  
are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from  
the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free  
redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and  
the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this  
section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.  
Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application  
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright  
holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that  
distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body  
of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will  
be similar in spirit to the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later  
version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software  
Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software  
Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask  
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make  
exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting  
the sharing and reuse of software generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER  
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK  
AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITHYOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY  
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,  
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE  
THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED  
BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER  
OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Appendix L – GNU LGPL 2.1  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the  
version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are  
intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.  
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software  
Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the  
ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you  
have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want  
it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These  
restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You  
must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to  
the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these  
terms so they know their rights.  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to  
copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone  
else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be  
affected by problems that might be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively  
restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for  
a version of the library must be consistent with the full freedom of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General  
Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for  
certain libraries in order to permit linking those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work,  
a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria  
of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.  
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public  
License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are  
the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special  
circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-  
facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job  
as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General  
Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software.  
For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as  
well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with  
the Library has the freedom and the wherewithal to run that program using a modified version of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based  
on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the  
library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other  
authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is  
addressed as “you”.  
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some  
of those functions and data) to form executables.  
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library”  
means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim  
or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term  
“modification”.)  
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the  
source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation  
of the library.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a  
program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library  
(independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that  
uses the Library does.  
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you  
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that  
refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such  
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other  
than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application  
does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.  
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore,  
Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it,  
the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be  
reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when  
you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the  
distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each  
and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right  
to control the distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a  
storage or distribution medium does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this,  
you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this  
License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead  
if you wish.) Do not make any other change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent  
copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of  
Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed  
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code  
from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along  
with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it,  
is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of  
this License.  
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions  
of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution  
of such executables.  
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative  
work of the Library even though the source code is not.  
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be  
true is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines  
or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this  
object code plus portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables  
containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing  
portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the  
customer’s own use and reverse engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License.  
You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library  
among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were  
used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the  
complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then  
relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions  
files in the Library will not necessarily be able to recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library  
already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a  
modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work  
was made with.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above,  
for a charge no more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified  
materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the  
executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either  
source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating  
system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.  
7.You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered  
by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other  
library facilities is otherwise permitted, and provided that you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must  
be distributed under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the  
accompanying uncombined form of the same work.  
8.You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise  
to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However,  
parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in  
full compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute  
the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing  
the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,  
distributing or modifying the Library or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original  
licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the  
recipients’ exercise of the rights granted herein.You are not responsible for enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions  
are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from  
the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free  
redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and  
the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this  
section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.  
Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application  
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright  
holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that  
distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the  
body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new  
versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any  
later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free  
Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software  
Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the  
author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we  
sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software  
and of promoting the sharing and reuse of software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED  
BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE  
THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY  
AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL  
NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY  
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,  
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE  
THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED  
BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR  
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone  
can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General  
Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey  
the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.  
<one line to give the library’s name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by  
the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.  
Thislibraryisdistributedinthehopethatitwillbeuseful, butWITHOUTANYWARRANTY;withouteventheimpliedwarrantyofMERCHANTABILITY  
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation,  
Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
Also add information on how to contact you by electronic and paper mail.You should also get your employer (if you work as a programmer) or your  
school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That’s all there is to it!  
Appendix M – BSD-New  
/*  
Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997  
The Regents of the University of California. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that: (1) source code distributions retain  
the above copyright notice and this paragraph in its entirety, (2) distributions including binary code include the above copyright notice and this  
paragraph in its entirety in the documentation or other materials provided with the distribution, and (3) all advertising materials mentioning features  
or use of this software display the following acknowledgement:  
``This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors.’’ Neither the name  
of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior  
written permission.  
THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
*/  
Appendix N – CinemaNow  
Third Party Requirements  
a. gSOAP.  
The following notice is applicable to the CinemaNow SDK. Company is required to include such notice in the documentation for any Embedded  
Products it distributes.  
Part of the software embedded in this product is gSOAP software.  
Portions created by gSOAP are Copyright (C) 2001-2004 Robert A. van Engelen, Genivia Inc. All Rights Reserved.  
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS  
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
b. [THE CODE IS BEING PROVIDED IN OBJECT CODE SO THE ABOVE DOESN’T APPLY]  
c. Curl/ 7.12.2  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright  
notice and this permission notice appear in all copies.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY  
RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE  
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other  
dealings in this Software without prior written authorization of the copyright holder.  
d. C-ARES 1.6.0  
Copyright 1998 by the Massachusetts Institute of Technology.  
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that  
the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation,  
and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.  
M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.  
e. Openssl 0.9.5a  
Original SSLeay License  
-----------------------  
Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with  
Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following  
conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation  
included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric  
Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or  
in documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes  
cryptographic software written by Eric Young ([email protected])” The word ‘cryptographic’ can be left out if the rouines from the library being  
used are not cryptographic related :-).  
4.If you include anyWindows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:  
“This product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN  
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS  
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be  
copied and put under another distribution license [including the GNU Public License.]  
Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights.  
This device uses WMDRM software to access WMDRM-protected content. If the WMDRM software fails to protect the content, content owners  
may ask Microsoft to revoke the software¡¯s ability to use WMDRM to play or copy protected content. Revocation does not affect unprotected  
content. When you download licenses for protected content, you agree that Microsoft may include a revocation list with the licenses. Content  
owners may require you to upgrade WMDRM to access their content. If you decline an upgrade, you will not be able to access content that requires  
the upgrade.  
Printed in China  
811-BD3091W011  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Targus Webcam AVC0102 User Manual
Timex Watch 113 095000 NA User Manual
Toshiba Laptop 2545 Series User Manual
Toshiba Portable DVD Player SD P1880SE User Manual
TRENDnet Modem tew 611brp User Manual
Uniden Scanner UBC30XLT User Manual
Vulcan Hart Hot Beverage Maker VGL20 User Manual
Vulcan Hart Oven ACB20 User Manual
Water Heater Innovations Water Heater 196284 001 User Manual
Weed Eater Lawn Mower WE12538J User Manual