Blu-ray Disc™/DVD Player
Lecteur de disque Blu-rayMC/DVD
EN
FR
BDX2250KC
OWNER’S MANUAL
MODE D’EMPLOI
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, andthe
point where they exit from the apparatus.
SAFETY PRECAUTIONS
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
CAUTION: VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
AVIS
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
WARNING:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN
The lightning flash with an arrowhead symbol,
within the equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
15. Do not overload wall outlets;extension cords, or integral
convenience receptacles as this can result in a risk of
fire or electric shock.
16. Never expose the apparatus to dripping or splashing or
place items such as vases, aquariums, any other item
filled with liquid, or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it is
closing.Neglecting to do so may cause serious personal
injury.
The exclamation point within the equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in this
owner’s manual.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE
TORAINORMOISTURE.DANGEROUSHIGHVOLTAGES
ARE PRESENT INSIDE THE ENCLOSURE. DO
NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
18. Do not place anything on top of this unit.
19. Do not place the apparatus on amplifiers or equipment
that may produce heat.
20. Never block or cover the slots or openings in the unit.
Never place the unit: 1) on a bed, sofa, rug or similar
surface; 2) too close to drapes, curtains, or walls; or 3)
in a confined space such as a bookcase, built-in cabinet,
or any other place with poor ventilation.
The symbol for Class II
(Double lnsulation)
The slots and openings are provided to protect the
unit from overheating and to help maintain reliable
operation.
21. Do not use a cracked, deformed, or repaired disc.These
discs are easily broken and may cause serious personal
injury and apparatus malfunction.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong.The wide
blade or the third prong is provided for your safety. If
22. If the apparatus should emit smoke or an unusual odor,
immediately disconnect the power cord from the wall
outlet. Wait until the smoke or smell stops, then ask
your dealer for a check and repair. Neglecting to do so
may cause fire.
23. During thunderstorms, do not touch the connecting
cables or the apparatus.
24. Warning:To prevent spread of fire, keep candles or other
open flames away from this product at all times.
25. Mains plug is used as disconnect device and it should
remain readily operable during intended use. In order
to disconnect the apparatus from the mains completely,
the mains plug should be disconnected form the mains
socket outlet completely.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
CAUTION:
On Placement
•
•
To prevent direct exposure to laser beam, do not try to
open the enclosure.Visible and invisible laser radiation
when open and interlocks defeated. DO NOT STARE
INTO BEAM.
Do not use this unit in places which are extremely hot,
cold, dusty or humid.
•
Do not restrict the air flow of this unit by placing it
somewhere with poor air flow, by covering it with a
cloth, or by placing it on bedding or carpeting.
Be sure to remove the disc and unplug the AC power
cord from the outlet before carrying the unit.
•
Use of controls or adjustments or performance of
procedures other than those specified may result in
hazardous radiation exposure.
•
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
On Safety
•
Do not handle the AC power cord with wet hands and
do not put your fingers or objects into the unit.
When connecting or disconnecting the AC power
cord, grip the plug and not the cord itself. Pulling the
cord may damage it and create a hazard.
Warning: Batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
•
FCC Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Information Systems, Inc.
•
When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
On Condensation
•
When left in a heated room where it is warm and
damp, water droplets or condensation may form
inside the equipment. When there is condensation
inside the unit, the unit may not function normally. Let
the unit stand for 1-2 hours before turning the power
on or gradually heat the room and allow the unit to dry
before use.
9740 Irvine Blvd., Irvine, CA 92618.
Ph: 1-800-631-3811
Note:This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
On Recycling
•
This unit’s packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away
or incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
•
Products that earn the ENERGY STAR®
prevent greenhouse gas emissions by
meeting strict energy efficiency guidelines
set by the U.S. Environmental Protection
Agency and the U.S. Department of Energy.
ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks.
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
-
-
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body.
This class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
WARNING: Changes or modifications to this unit not
expressly approved by Toshiba, or parties authorized by
Toshiba, could void the user’s authority to operate the
equipment.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Remote Control with Batteries (AAA x 2) .............. x 1
Owner’s Manual (EN/FR)....................................... x 1
Quick Start Guide(EN/FR)..................................... x 1
The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.The Wi-Fi Protected Setup Mark is
a mark of the Wi-Fi Alliance.
“DVD” is a trademark of DVD Format /
Logo Licensing Corporation.
Symbols Used in this Manual
x.v.Colorandx.v.Colorlogoareregisteredtrademarks
of Sony Corporation.
To specify for which media type each function is, we put
the following symbols at the beginning of each item to
operate.
EN
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Symbol
Description
Description refers to BD-video and BD-
RE / BD-R recorded in BDMV format
Description refers to DVD-video
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
Description refers to Audio CD / DTS-CD
Description refers to DVD-RW/-R with
AVCHD files
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R with MP3 files
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R with WMA files
Blu-ray Disc™, Blu-ray™, BD-Live™ and
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R with JPEG files
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R with MKV files
If you do not find any of the symbols listed above under
the function heading, the operation is applicable to all
media.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
Trademark Information
WindowsMediaandtheWindowslogoaretrademarks
or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Netflix is a registered trademark of Netflix Inc.
YouTube is a registered trademark of Google, Inc.
Picasa is a trademark of Google, Inc.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued & pending. DTS-
HD, the Symbol, & DTS-HD and the Symbol together
are registered trademarks & DTS-HD Master Audio
DLNA®, the DLNA Certification Logo and DLNA
CERTIFIED™ are trademarks, service marks, or
certification marks of the Digital Living Network
Alliance.
|
includes software. © DTS, Inc. All Rights Reserved.
Essential is
a
trademark of DTS, Inc. Product
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Blu-ray Disc™
x.v.Color®
You can enjoy Blu-ray Disc™ which is capable of storing
five times more data than a conventional DVD.
This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color”, a TV or other display device
supporting both video image reproduction using the
“x.v.Color” standard and capable of manually switching its
color setting is required.Please refer to the owner’s manual
of your display device for further information.
BD-Java
With some Blu-ray Disc™ which support Java applications,
you can enjoy the interactive functions such as games or
interactive menus.
Wi-Fi CERTIFIED®
BD-Live™
The Wi-Fi CERTIFIED logo is an assurance that Wi-Fi
Alliance has tested a product in numerous configurations
and with a diverse sampling of other devices to ensure
compatibility with other Wi-Fi CERTIFIED equipment that
operates in the same frequency band.
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows
interactive functions to be used when this unit is connected
to the Internet in addition to the BONUSVIEW function.The
various functions differ depending on the disc.
Full high-definition video playback
Easy and simple connection to your HDTV via
HDMI®
Watch movies in the highest picture quality available
for your HDTV. This unit offers full high-definition video
playback up to 1080p resolution for an amazing viewing
experience. A highly detailed picture and increased
sharpness delivers a more true-to-life picture.
Connect this unit to your HDTV with one single HDMI (High-
Definition Multimedia Interface) cable. It is recommended
to use a High Speed HDMI Cable for better compatibility.
The high definition video output signal will be transferred
to your HDTV without conversion to analog signals, so you
will get excellent picture and sound quality.
DVD Upconversion for enhanced picture quality
Your current DVD will look even better than before thanks
to video upconversion. Upconversion will increase the
resolution of standard definition DVD to high definition up
to 1080p over an HDMI connection. The picture will be
less jagged and more realistic for a near high-definition
experience.
Thanks to other multiple outputs, you can also easily
connect to your home theater system or amplifier.
HDMI® CEC (Consumer Electronics Control)
This unit supports HDMI CEC, which allows integrated
system control over HDMI and is part of the HDMI
standard.
Enjoy your content on different kinds of media
Full backwards compatibility with Blu-ray Disc™, DVD and
CD ensures that you can continue to enjoy your current
audio-video collection. Additionally, you can view JPEG
digital pictures or listen to MP3 or Windows Media™
Audio music files.
This function may not work properly on some devices.
HDMI 1080p/24F output (Blu-ray Disc™ only)
This unit is equipped with a feature which can provide
the smooth movement in the playback of film originated
material with the frame rate of 24 frames per second with
progressive scan.(Available only when theTV is connected
by an HDMI cable and compatible with 1080p/24F frame
input.)
PIP (BONUSVIEW™)
Some BD-videos have the PIP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressingBONUSVIEW
whenever the scene contains the secondary video.
Copyright protection system
To play back the digital video images of a Blu-ray Disc™
/ DVD via an HDMI connection, it is necessary that
both the unit and the TV (or an AV amplifier) support
a copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is
copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit
supports HDCP. Please read the operating instructions of
your TV (or AV amplifier) for more information.
Pop-up menu
Some BD-video have pop-up menu which is a navigation
menu that can be called up and be operated on the TV
screen without interrupting the playback.You can call up the
pop-up menu by pressing POP/TOP or MENU.Contents in
the pop-up menu vary depending on the disc.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on
disc. Your high definition personal archive is playable in
HD quality.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Front Panel
1
2
3 4
5
6
7
1. Disc tray
6. PLAY
button
EN
2. Power indicator
3. Remote sensor
7. POWER button
•
Press to turn on the unit, or to turn the unit into
the standby mode. (To completely turn off the
unit, you must unplug the AC power cord.)
4. OPEN/CLOSE
5. STOP button
button
Rear Panel
1
2
3
4
5
1. AC power cord
4. USB port
Use to connect a USB flash drive/wireless LAN
adapter (not included).
5. LAN terminal
Use to connect network equipment with a LAN
cable.
•
Connect to a standard AC outlet to supply power
to this unit.
•
•
Unplug this cord from the AC outlet to completely
turn off the unit.
•
2. COAXIAL DIGITAL AUDIO OUT jack
•
Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a
coaxial digital audio input jack using a coaxial
digital audio cable.
3. HDMI OUT jack
•
Use to connect a TV with an HDMI compatible
port via an HDMI cable.
*
HDMI connection is required. Cables are not
included. Analog connection is not supported.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Remote Control
No. Item
Description
POWER
OPEN/CLOSE Press to open or close the disc
tray.
1
13
14
1
2
3
Press to display the search
menu.
GOTO
During playback, press to fast
reverse the playback.
REV
•
During playback, press once
to return to the beginning
of the current title, chapter,
track or file.
GOTO
Clear
2
15
16
HOME MENU MENU BONUS VIEW POP/TOP
•
•
During playback, press twice
to return to the previous title,
chapter, track or file.
4
SKIP
REV
PLAY
STOP
FWD
17
18
19
20
3
4
5
During the JPEG playback,
press to return to the previous
file.
SKIP
SKIP
INFO
PAUSE
STEP
SLOW
PAUSE
STEP
Press to pause playback.
Press to advance one frame.
Press to play back the disc in
slow motion.
5
SLOW
INFO
Press
information.
to
display
disc
21
OK
Press to return to the previous
menu.
6
7
RETURN
RETURN
NETFLIX
6
22
23
Press to turn random function
on or off for Audio CD, MP3 or
WMA disc.
RANDOM
ANGLE
RANDOM ANGLE
PIC RESOLUTION
Press to select a viewing angle
if multiple angles are available
on the disc.
7
8
9
10
24
25
26
27
8
SUB AUDIO 2nd. SUB 2nd. AUDIO
A-B REPEAT
SUB
Press to display the subtitle
menu.
9
(SUBTITLE)
11
12
10
AUDIO
Use to select the audio mode.
Press to play back a defined
section between point A and B
repeatedly.
11
12
A-B
SE-R0402
Press to toggle between
various repeat modes.
REPEAT
POWER
Press to turn on the unit, or to
turn the unit into the standby
mode. (To completely turn off
the unit, you must unplug the
power cord.)
13
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
No. Item
Description
In playback mode, use to adjust
picture quality according to
your preference (Actual effect
to picture may vary depending
on TV.):
•
In playback mode, press
GOTO, then press the
number buttons to enter a
title, chapter, track, time or
file number.
Number
buttons
25
PIC
14
15
•
E.P.M (Enhanced Picture
Mode):The picture is sharper
with enhanced color.
•
In menu mode, press to enter
the parental code password.
•
Sharpness
CLEAR
Press to clear an input error.
In PIP mode, press to turn the
audio for the secondary video
on or off.
Press to display the home
menu of the player.
HOME MENU
MENU
26
27
2nd. AUDIO
Press to display disc menu.
In PIP mode, press to turn
the subtitle for the secondary
video on or off.
EN
2nd. SUB
Press to switch picture-in-
picture feature on or off (only
applicable to BD-video which
supports the PIP function).
(SUBTITLE)
BONUSVIEW
16
•
During
Blu-ray
playback, press to open
Disc
a
Installing batteries
Install the batteries (AAAx2) matching the polarity indicated
inside battery compartment of the remote control.
menu that lets you control
Blu-ray Disc playback.
POP/TOP
Open the cover.
•
During DVD playback, press
to open the DVD menu (if
available).
1
During playback, press to fast
forward the playback.
17
18
FWD
Press to start playback or
resume playback.
PLAY
Insert batteries.
•
During playback, press to skip
to the next title, chapter, track
or file.
2
19
SKIP
•
During the JPEG playback,
press to go to the next file.
20
21
Press to stop playback.
STOP
Make sure to match the + and – on the batteries to
the marks indicated in the battery compartment.
Press to select items or
settings.
/
/
/
Press to confirm or select
menu items.
OK (ENTER)
NETFLIX
Close the cover.
3
Caution: Never throw batteries into a fire.
Press to use Netflix service
directly. (Make sure your Blu-
ray Disc™ player is correctly
connected to the internet and
network settings are properly
configured.)
22
Notes:
•
Do not mix different battery types or combine used
batteries with new ones.
•
Press to select items
on some Blu-ray Disc™
contents.
•
If the remote control does not operate correctly, or if
the operating range becomes reduced, replace both
batteries with new ones.
RED / GREEN
/ BLUE /YEL-
LOW
23
24
•
If the batteries are dead or if you will not be using the
remote control for a long time, remove the batteries
to prevent battery acid from leaking into the battery
compartment.
•
When file list / thumbnail list
is shown, press to switch
between pages.
Press to select the video
resolution in full stop mode.
RESOLUTION
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Operating with the remote control
* Do not expose the remote sensor of the Blu-ray Disc™
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the Blu-ray Disc™ player via the remote
control.
Point the remote control at the remote sensor
and press the buttons.
Notes:
•
Direct the remote control at the remote sensor of the
Blu-ray Disc™ player.
•
When using the remote control, press the buttons at
intervals of about 1 second to ensure the correct mode
of operation.
POWER
•
•
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot
or humid place.
•
Do not spill water or put anything wet on the remote
control.
Distance: About 5 m from the front of the remote
sensor.
•
•
Do not open the remote control.
Angle:
About 30° in each direction of the front of the
remote sensor.
If the remote control is not going to be used for a long
time, remove the battery to avoid damage caused by
battery leakage corrosion.
Connections
Connecting to a TV using an HDMI® cable
This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F resolution.
Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV.
High
Definition
TV
HDMI Cable
(not included)
HDMI IN
HDMI OUT
Notes:
•
•
HDMI connection is required. Cables are not included. Analog connection is not supported.
Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
•
•
When using a non-HDCP compatible TV, the image will not display properly.
An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an
additional audio connection if you are using an HDMI cable.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a digital amplifier/AV receiver
Route the sound from this player to other device to enhance audio output.
•
•
Connect a coaxial cable from the COAXIAL DIGITAL jack on this product to the COAXIAL jack on the device.
If your AV receiver or amplifier has an HDMI jack, you can also connect the HDMI cable to HDMI IN jack on your AV
receiver or amplifier.
AV receiver / amplifier
EN
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial cable
(not included)
Connecting to network
Your Blu-ray Disc™ player can be connected to your home network:
•
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using
a wired network provides the best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
•
By connecting through the built-in wireless device and a wireless access point or router.
Connecting your player to a wired router
•
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player
and to an Ethernet jack on a hub or broadband router.
Hub or broadband router
Networking equipment
(modem, etc.)
Notes:
•
Do not connect a modular
p h o n e c a bl e t o t h e
ETHERNET jack.
WAN
LAN
1
LAN
•
When plugging or unplugging
the cable, hold the connector
on the end of the cable.
When unplugging, do not
pull on the cable.Press down
the lock tab and pull the
connector out of the jack.
Because there are various
connection configurations,
follow the instructions from
your telecommunication
carrier or Internet service
provider.
5
4
3
2
LAN cable
LAN cable
•
Internet
LAN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting your player to a wireless access point or router
Your Blu-ray Disc™ player has an integrated Wi-Fi device and antenna. No physical connection to the wireless router
is necessary.
•
Configure your player to access the wireless access point or router. For more information, see “Configuring a wireless
Internet connection” on page 26.
•
The network configuration and connection method may vary depending on the equipment in use and the network
environment.Your Blu-ray Disc™ player is equipped with an IEEE 802.11n wireless module, which also supports the
802.11 a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certified Wi-Fi
network (access point or wireless router).
Notes:
•
You must use a wireless IP sharer that supports
IEEE 802.11 a/b/g/n. (n is recommended for
stable operation of the wireless network.)
•
Wireless LAN, in its nature, may cause
interference, depending on the use condition
(AP performance, distance, obstacle, interference
by other radio devices, etc.).
Wireless access point
Modem Port
•
•
Set the wireless IP sharer to Infrastructure mode.
Ad-hoc mode is not supported.
When applying the security key for the AP
(wireless IP sharer), only the following is
supported.
Modem Cable
1) Authentication Mode : WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
Connecting a USB Flash Drive
A USB flash drive provides an additional memory to
software upgrade and enjoy BD-Live™ bonus content.
You can also enjoy playing back MP3/WMA/JPEG/MKV
files stored in the USB flash drive.
Inserting a USB flash drive into the USB port on the back
of Blu-ray Disc™ player until it clicks.
Notes:
USB
•
•
Connect only a USB flash drive to the USB port on this product.
If you cannot easily insert the USB flash drive, you may have
inserted it incorrectly. Try to turnover the device and then insert
again.
•
•
Do not remove the USB flash drive during playback.
BD-Live™: Access to BD-Live™ requires use of USB flash drive
(not included) installed in the USB port.For additional information
regarding the access to BD-Live™, see page 21 of the manual.
TOSHIBA does not guarantee 100% compatibility with all USB
flash drives.
USB Flash Drive
•
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Information on Playback
Before you start playing back a disc, read the following
information.
Unplayable Discs and Files
The following discs will not be played back in this unit.
•
•
•
•
•
•
•
•
•
•
•
CD-ROM
CD-I (compact disc-interactive)
DVD-RAM
VSD (video single disc)
DVD-audio
HD DVD
VIDEO CD
Unfinalized disc
Playable Discs and Files
This unit is compatible to play back the following discs
/ files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos.
SACD
Other disc types are not guaranteed to play back.
Blu-ray Disc™ / DVD containing DivX® files.
Blu-ray Disc™ / DVD hybrid disc (played back as a BD-
video only)
EN
Playable discs
Blu-ray Disc™
Logos
•
•
Blu-ray Disc™ that contains AVCHD files
DVD-RW/-R recorded in non compatible recording
format.
Super Audio CD - Only the sound on the CD layer can
be heard. The sound on the high-density Super Audio
CD layer cannot be heard.
Playability of dual discs are not guaranteed.
Multi session disc
Multi border disc
- BD-ROM (single / dual layer)
- BD-RE (single / dual layer)
(Recorded in BDMV format)
- BD-R (single / dual layer)(Re-
corded in BDMV format) (Un-
closed discs may not be played
back.)
•
•
•
•
DVD-ROM
DVD-RW
DVD-R
Region Codes
This unit has been designed to play back BD-video with
region “A” and DVD-video with region “1” or “ALL”. You
cannot play back BD-video or DVD-video that are labeled
for other regions.Look for the symbols on the right on your
BD-video or DVD-video.
If these region symbols do not appear on your BD-video
or DVD-video, you cannot play back the disc in this unit.
The letter or number inside the globe refers to region of
the world. A BD-video or DVD-video labeled for a specific
region can only be played back in the unit with the same
region code.
CD-DA (audio CD)
CD-RW
CD-R
DTS-CD
-
BD-video
Playable files
Media
AVCHD
DVD-RW/-R
MP3
DVD-video
Windows MediaTM Audio
BD-RE/-R, DVD-
RW/-R, CD-RW/-R
Color System
JPEG
MKV
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
•
This unit cannot playback the disc contents protected
by Windows Media™ Digital Rights Management
(DRM).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Structure of Disc Contents
Place the disc on the disc tray.
The contents of Blu-ray Disc™ / DVD / AVCHD are
generally divided into titles. Titles may be further
subdivided into chapters.
3
With the playback side
down
TM
Blu-ray Disc / DVD / AVCHD
title 1 title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
4 Press OPEN/CLOSE to close the disc tray.
Playback starts.
Audio CD is divided into tracks.
If you insert a Blu-ray disc or a DVD that
contains a top menu, a menu may appear. Use
audio CD
track 3
track 1
track 2
track 4
track 5
/
then press OK to start playback.
/
/
to select the title you want to view,
•
You may need to press the POP/TOP or MENU
button to display disc menu (depending on the
actual Blu-ray disc or DVD.)
Data discs or USB flash drives containing MP3 / WMA
/JPEG are divided into folders, and the folders are
subdivided into files.
To start playback in stop mode
Press PLAY.
MP3 / WMA / JPEG
folder (group) 2
file 4
folder (group) 1
file 1
To pause playback (still mode)
file 2
file 3
file 5
Press PAUSE during playback.
To resume normal playback, press the PLAY button.
• The sound is muted during still mode.
To stop playback
Press STOP. The home menu is displayed.
For Blu-ray discs, press
then press OK to start playback at the beginning of
/
to select BD-ROM,
the disc.
Basic Playback
Preparations
For DVDs/audio CDs, press
normal playback.
PLAY to resume
•
When you want to view a disc, turn on the TV and select
the video input connected to the Blu-ray Disc™ player.
• Depending on the disc, playback starts where it
stopped or at the beginning of the disc.
• If you press
completely. To stat playback again, press
Playback starts at the beginning of the disc.
STOP twice, playback stops
PLAY.
CAUTION:
Keep your fingers well clear of the disc tray as itis closing.
Neglecting to do so may cause serious personal injury.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Press the POWER button.
1
POWER
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
The Blu-ray Disc™ player
turns on.
To turn the power off
Press POWER button to turn the unit off.
Press OPEN/CLOSE.
2
The disc tray opens.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Variable Speed Playback
Locating a Desired Section
You can play discs at various speeds, and resume playback
from the location where you stopped playback.
Normally, Blu-ray discs and DVDs are divided into titles,
and the titles are sub-divided into chapters. Audio CDs
are divided into tracks.You can quickly locate any specific
title, chapter, or track.
Playing in fast reverse / forward directions
Locating a title using the pop/top menu
Press
or
during playback.
FWD
: Fast forward playback
: Fast reverse playback
Press POP/TOP.
REV
1
POP/TOP
EN
The pop/top menu appears on the
TV screen.
Each time you press this button, the fast-forward
or fast-reverse speed changes in the following
sequence:
Press
want.
/
/
/
to select the title you
Fast x 2
Fast x 4
Fast x 8
Fast x 16
2
3
Fast x 32
Fast x 64
Fast x 128.
If the titles in the top menu are assigned a
number, you can directly locate a specific title
by pressing its designated number with the
number buttons.
To resume normal playback
Press PLAY.
Notes:
Press OK.
•
The Blu-ray Disc™ player mutes sound and subtitles
during reverse and forward scan.
The playback speed may differ depending on the disc.
Playback starts from Chapter 1 of the selected
title.
•
Playing frame by frame
Locating a specific chapter or track
Press
during still playback.
STEP
Each time you press this button, the picture
advances one frame.
Press
or track number you want.
or
repeatedly to access the chapter
To resume normal playback
Press PLAY.
Playback starts from the selected chapter or track.
SKIP
Note: The sound is muted during frame by frame playback.
: Playback starts from the beginning of the current
chapter or track.When you press twice in quick
successions, playback starts from the beginning
of the preceding chapter or track.
Playing in slow motion
SKIP
: To locate succeeding chapters or tracks.
Press
during playback.
SLOW
Each time you press this button, the slow-
motion speed changes in the following
sequence:
Note: Some titles may not display chapter numbers.
Slow x 1/2
Slow x 1/4
Slow x 1/8
To resume normal playback
Press PLAY.
Notes:
•
•
The sound is muted during slow-motion playback.
3 speeds are available.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Accessing a Specific Location Directly
Locating a specific title/chapter/time
Press GOTO.
(Press GOTO once)
1
The Goto menu appears on the TV screen.
Goto File:
/ 21 (Current: 10)
GOTO
e.g.
1
2
3
a. Press the GOTO button once:
:
the desired file number
1
2
3
: the total file number
Goto Title:
/ 4 (Current: 1)
: the currently playing file number
(Press GOTO twice)
1
2
3
:
the desired title number
1
2
3
: the total title number
: the currently playing title number
Goto Time:
:
:
/ 01:50:46 (Current: 0:05:52)
1
2
3
:
the desired time (hh:mm:ss)
1
2
3
b. Press the GOTO button twice:
: the total time
: the elapsed time
Goto Chapter:
/ 30 (Current: 1)
Press the number buttons to enter title,
chapter (track) number or time.
1
2
3
2
3
:
the desired chapter number
1
2
3
While accessing the TIME using number
buttons, just enter 2 digits in order.
: the total chapter number
: the currently playing chapter number
The first two numbers you enter represent
hours.
The second two numbers you enter represent
minutes.
c. Press the GOTO button for 3 times:
The third two numbers you enter represent
seconds.
Goto Time:
:
:
/ 01:50:46 (Current: 0:05:52)
Press the CLEAR button to reset the
numbers.
1
2
3
Press OK.
:
the desired time (hh:mm:ss)
1
2
3
: the total time
Playback starts from the selected section.
: the elapsed time
(Press GOTO once)
Goto Track:
/ 21 (Current: 10)
1
2
3
:
the desired track number
: the total track number
: the currently playing track number
1
2
3
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playing in a Random Order
Repeating a Title, Chapter,Track or Specific Segment
Repeating a title, chapter or track
Playing tracks or files in a random order
Press REPEAT repeatedly to select the desired
repeat mode during playback.
Press RANDOM repeatedly to select Random ON
during playback.
e.g.
Once you turn RANDOM function on, the RANDOM
indicator will be activated and the system will play
all files in a random sequence.
Repeat Off
Repeat Off
Repeat Title
Repeat All
Repeat Chapter
Repeat Track
Repeat Off
Repeat Off
To resume normal playback
EN
Press RANDOM repeatedly until
displayed.
“
”
is
Random Off
PIP (BONUSVIEW™) Setting
Repeat Off
Repeat Off
Repeat All
Repeat All
Repeat File
Repeat Off
Some Blu-ray discs have the PIP function which enables
you to display the secondary video in the primary video.
You can call up the secondary video by pressing BONUS
VIEW whenever the scene contains the secondary video.
See the documentation that came with the disc for playback
instructions.
Repeat Off
Notes:
•
•
•
•
•
The repeat setting will be cancelled when you stop
playback.
The chapter, title or track repeat will be cleared when
moving to another chapter, title, track / file or folder.
Repeat playback does not function during A-B repeat
playback.
Chapter and title repeat are not available with some
scenes.
When the repeat setting is set for a MP3 or WMA folder
(file), the repeat setting will be cancelled if you select other
MP3 or WMA folder (file) to playback.
Press BONUS VIEW during playback to turn
PIP mode on.
1
BOUNS VIEW
Press 2nd. AUDIO to turn the audio for the
video in the PinP window on or off.
2
2nd. AUDIO
Repeating a specific segment
Press 2nd. SUB to turn the subtitle for the video
in the PinP window on or off.
3
Press A-B at the desired starting point A
during playback.
2nd. SUB
1
2
Press A-B at the desired ending point B
during playback.
The Blu-ray Disc™ player automatically returns
to point A and starts repeat playback of the
selected segment (A-B).
Primary video
To resume normal playback
Secondary video
Press A-B until
is displayed.
Repeat Off
Notes:
•
•
Some discs may not permit A-B repeat operation.
You can specify a segment only within the current title or
track.
You cannot set the A-B repeat function for a segment that
includes multiple camera angles.
To resume normal playback
Press BONUS VIEW to turn off the PIP mode.
•
•
Note: PIP audio cannot be heard unless Bitstream
Mixed has been selected on the Audio menu. For more
information, see “Audio Setting” on page 23.
A-B repeat does not function during chapter, title, track or
all repeat playback.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Camera Angle
Subtitle Selection
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles.
During playback, press SUB.
1
2
During playback, press ANGLE.
1
Subtitle
01/07 ENG
N/A
The selected angle will be displayed on the
display bar at the top of the TV screen.
PIP Subtitle
In the example “01/07 ENG”,
Angle
01/03
“01” indicates the currently selected subtitle.
“07” indicates the total number of subtitles.
“ENG” indicates the subtitle language.
The first digit indicates the current viewing
angle, and the second digit indicates the total
number of viewing angles.
Press , then use
angle.
/
to select the desired
Press , then use
angle.
/
to select the desired
2
Displaying On-screen Information
Audio Selection
You can check information about the current disc by
pressing INFO.
During playback, press AUDIO.
1
Title 1 Chapter 1/25
BD-ROM
0:02:00
1:57:35
Off
Play
Audio
01/03 ENG Dolby TrueHD
01/03 ENG Dolby TrueHD
PIP Audio
In the example “01/03 ENG Dolby TrueHD”,
“01” indicates the currently selected audio
channel.
“03” indicates the total number of audio
channels.
Title 1 Chapter 1/18
0:02:00
DVD
1:57:35
Off
Play
“ENG” indicates the audio language.
“DolbyTrueHD”describes the currently selected
audio format.
Track 1/12
0:00:20
CD-DA
Press , then use
audio language and audio format.
/
to select the desired
0:05:35
Off
Off
Play
2
Notes:
File: 1/5 song1.mp3
Title: Cool Track
•
The available options of Audio vary from different disc
format.
Artist: Ricardo Funiccio
Album: Dead Dux
•
PIP Audio is not available for all discs. It only applies to
Blu-ray discs that supports picture-in-picture features.
Off
Off
Play
0:02:00
0:30:00
File: 4/13 flower.jpg
Off
Pause
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playing AVCHD/MP3/WMA/JPEG/MKV Files
Settings: This option enables you to define Slide
Show Effects (None, Horizontal Scroll, Fade and
Shutter) and Slide Show Delay (5 Seconds, 2
Seconds, 1 Second, No Delay, 10 Seconds, 15
Seconds and 30 Seconds). After setting, press to
highlight Ok and then press OK to confirm.
You can play AVCHD, MP3, WMA, JPEG or MKV files
that have been recorded on a disc on the Blu-ray Disc™
player.
Playing files on a data disc
Slide Show Effects
Slide Show Delay
None
No Delay
Ok
When you insert a data disc containing picture, music, or
video files into your player, icons are added to the menu
to indicate that video, music, or picture files are available
for playback.
Main Menu: Returns to the main menu.
EN
Press OPEN/CLOSE to open the disc tray,
place a disc that contains video/
JPEG files.
Previous Folder: This item only appears if your
optical disc or USB flash drive contains several
different picture folders.
MP3/
1
2
Start Slide Show: This option enables you to view
picture (files) one after another automatically.
In Home Menu, press
and then press
/
to select Media,
,
If a USB flash drive containing music is inserted
at the same time, the system will enter the
source selection screen shown as below:
Browse Music: Goes back to Music folder.
Press
then press OK to start playing.
/
to select the desired photo, and
4
5
Optical Disc
USB1
:
Press REPEAT repeatedly to select the
desired repeat mode.
To play music files while viewing photos,
follow the following steps:
If no USB flash drive is inserted, the system will
only show optical disc.
• Press RETURN.
• Use /
press OK.
to select Browse Music, then
Press
/
to select a desired source and
then press to highlight an option, and then
press OK.
3
• Select the desired track and press OK to
start playing.
(For example: selecting the Pictures)
To stop playing and return to the main menu,
follow one of the steps described below:
Pictures
6
Optical Disc
30 item(s)
• Press STOP.
1
• Press RETURN.
• Press , then use
Menu and then press OK to confirm.
/
to highlight Main
Settings
Thumbnail
Main Menu
Start Slide Show
Browse Music
Now Playing
Tile N/A Chapter N/A
2
3
1
: defines the total number of files that a device
contains.
2
3
: shows the currently playing file number.
: shows all pictures in thumbnail mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Using a USB Flash Drive
Using Media Player Function
Operating Media Player function
You can play MP3, WMA, JPEG or MKV files that have
been stored on USB flash drives on the Blu-ray Disc™
player.
Set Media Player to “ON”.
Operating a USB Flash Drive
1For detailed operations, please refer to the
“Media Player” section in “System Setting”
on page 24.
Inserting a USB flash drive into the USB
port on the back of Blu-ray Disc™ player
until it clicks.
1
In Home Menu, press
and then press
/
to select Media,
.
2
If Media Player is set to “OFF”, Media Player
will not function.
In Home Menu, press
and then press
/
to select Media,
.
2
If no optical disc is inserted, the system will only
show USB flash drive.
Press
press
OK.
/ to select a desired source, then
to highlight an option, and press
3
Press
press
OK.
/ to select a desired source, then
to highlight an option, and press
Notes:
3
•
Make sure your player is properly connected to the
network before using Media Player. Furthermore, you
need other Media Player servers in the network to see
and/or hear contents.
For detailed operations, please follow the instructions in
“Playing files on a data disc” on page 19 for details.
•
Do not remove the LAN connector during playback.
Removing the USB Flash Drive
In stop mode, gently pull the USB flash drive out
slowly.
Notes:
• If you cannot easily insert the USB flash drive, you may
have inserted it incorrectly. Try to turnover the device
and then insert again.
• Do not remove the USB flash drive during playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
You can change the default settings to customize
performance to your preference.
3. Follow the on-screen instructions to customize the
following settings to your preference:
•
•
•
•
•
•
OSD Language Settings
Resolution
General Operations
TV Aspect
1. Press
full stop mode, the Settings menu appears.
2. Press button, then use button to select the
setting options.
3. Press OK button.
/
to select Settings in home menu while in
Wireless
Optical Disc Auto Play
Screen Saver Duration
/
4. After setting, press OK to confirm and exit the setup.
Note: If it is the first time for the player to start up or
users restore all settings to factory defaults, the system
will prompt you to perform Quick Setup. Repeat the steps
described as above to complete the setup.
4. Press or RETURN button to return to the previous
menu.
EN
Info
Using BD-Live™ Features
Quick Setup
BD-Live
Some (but not all) Blu-ray Disc™ discs contain additional
features that are made available to players that are
connected to the internet, and have additional memory
added. These additional features may include things like:
Display
Audio
•
•
•
the ability to download new movie trailers
additional ‘commentary’ by actors and directors
multiperson game play and chat
A
Language
In order to access BD-Live™ functions, the player must
be properly configured for BD-Live internet access, and it
must be equipped with additional memory.
Parental
Note: BD-Live™ requires connection of a USB flash drive
of at least 1 GB (sold separately) to USB port.Performance
of interactive features may vary due to disc design or
content, and may also require an always-on broadband
internet connection. Firmware update may be required
for some interactive features. Some features may require
additional bandwidth.
submenu display area
Settings menu items
Info Menu
This menu displays the following information:
1. In the main menu of Settings, press button, then use
/
button to select BD-Live, then press OK.
•
•
•
Software Version
Software Date
Netflix ESN
2. Press
3. Use
/
to select an option, and then press OK.
/
OK to confirm.
to select the desired setting, and then press
4. Press to go to the previous menu.
1. In the main menu of Settings, press button, then
use button to select Info to display the version
/
information on software and Netflix ESN.
BD-Live Internet Access:
•
•
•
Limit Access — Allows Internet access with valid BD-
Live™ network access approval.
2. Press or RETURN to go to the previous menu.
Always Allow Access — Always allows BD-Live
Internet access.
Performing Quick-Setup
Prohibit Access — Never allows BD-Live Internet
access.
1. In the main menu of Settings, press button, then use
/ button to select Quick Setup, and then press OK
to confirm.
In order to set the player up for BD-Live Internet Access,
perform the following steps:
2. Press OK to perform Quick Setup.
To exit the setup menu:
1. In the main menu of Settings, press button, then use
/
to select BD-Live, then press OK.
to select “BD-Live Internet Access”, and
2. Press /
then press OK.
•
Use button to highlight “No thanks. I’ll go through
the full setup menu later”, and then press OK.
3. Use
/
OK to confirm.
to select the desired setting, and then press
•
Or press button directly.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
4. Make sure that “Limit Access” or “Always Allow
Access” is checked.
Resolution:
You can define the video output resolution in this option.
5. Once the USB flash drive has been inserted, if there
is not at least 100Mbyte of free space on the device,
you should choose “Erase Blu-ray Storage” from the
BD-Live setup menu.
TV Type
Resolution
If your TV is a high-definition
TV(HDTV) connected to the HDMI
jack on your player and you want your
player to set the output resolution
based on information exchanged
between the TV and your player over
the HDMI cable.
6. Press to return to the main menu of Settings, then
use
/
to highlight Network, and then press OK.(For
HDMI Auto
details, please refer to “Network Connection Setting”on
Page 26.)
Notes:
•
•
•
Depending on your connection environment, it may take
time to connect to the Internet or the Internet may not
be connected.
When BD-Live™ function are used and the unit is
connected to the Internet, you may be charged for this
communication.
If the TV is a high-definition TV
(HDTV) capable of 1080p (any frame
rate) connected to the HDMI jack on
your player
1080p
If your TV is a high-definition TV
(HDTV) capable of 1080i only
Do not remove the USB flash drive when using the
BD-Live™ function.
1080i
720p
480p
480i
If your TV is a high-definition TV
(HDTV) capable of 720p only
BD-Live Storage:
This option is used to tell the Blu-ray Disc™ player whether
or not to use an inserted USB flash drive to store BD-Live™
content (movie trailers, additional scenes, etc.).
If your TV is an enhanced-definition
TV (EDTV) capable of 480p only
In order to add BD-Live™ memory for BD-Live Internet
Access, insert a USB flash drive (1GB is recommended)
into the USB port on the player.
If your TV is a standard-definition TV
(SDTV) capable of 480i only
Erase Blu-ray Storage:
Notes:
•
If you choose OK to erase Blu-ray storage, all bookmarks
and BD-Live™ content saved in memory are deleted.
Selecting a resolution the TV does not support could
result in an unstable picture or loss of the picture. See
the documentation that came with the TV to find the
resolutions the TV supports.
•
Only the HDMI output on your player supports 1080p
video output at any frame rate.
Display Setting
1. In the main menu of Settings, press button to select
Display, and then press OK to confirm.
TV Aspect:
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan and 4:3
Letter Box are available for your choice.
2. Press
3. Use
/
to select an option, and then press OK.
/
OK to confirm your selection.
to select the desired option, and then press
Film Mode:
Movies are recorded on film at a rate of 24 pictures (frames)
per second. Many of the movies on Blu-ray discs are
placed on the discs at this frame rate. If your TV supports
24 frames per second, but you would prefer viewing the
video at a higher frame rate, you should turn off Film Mode.
Off selects a 60 frames/second output format.
4. Press to go to the previous menu.
HDMI Status:
This option displays the HDMI status. If an HDMI TV is
connected, Connected appears. If an HDMI TV is not
connected, Disconnected appears.
Deep Color:
HDMI Preferred Format:
This option decides whether to turn off the Deep Color
(color depth) setting for video signals output from the
HDMI OUT jack.
This option shows the best HDMI format for the connected
TV. If HDMI is not pulled out, a composite image is not
output.
Connecting the player and a TV that supports Deep
Color allows more accurate color reproduction than when
connecting it to a TV that does not support Deep Color.
It is recommended to set this option Off if the picture is
unstable or colors appear unnatural.
* HDMI connection is required. Cables are not
included. Analog connection is not supported.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
This would be useful, for instance, when you want to watch
a movie in the evening when others might be sleeping.
Audio Setting
NOTE:This setup menu item has no effect unless you have
selected “Bitstream Mixed” in the Blu-ray Disc™ player’s
audio setup menu.
The settings in the Audio menu will configure the Blu-ray
Disc™ player’s digital audio outputs (HDMI or Coaxial).
1. In the main menu of Settings, press button, then use
button to select Audio, then press OK button.
When Dynamic Range Control is set to Off, movie
soundtracks are played with the standard dynamic range.
/
2. Press
3. Use
/
to select an option, and then press OK.
When movie soundtracks are played at low volume orfrom
smaller speakers, you can set Dynamic Range Control to
On.Your player applies appropriate compression to make
low-level content more intelligible and prevent dramatic
passages from getting too loud.
/
press OK to confirm your selection.
to select your preferred audio items, and then
4. Press to go to the previous menu.
PCM Downsampling:
Selecting the “Auto” option turns on the Dynamic Range
Control for all Blu-ray Disc™ movie soundtracks except
Dolby TrueHD. If you have selected a Dolby TrueHD track
on the Blu-ray Disc™ disc, the “auto” selection tells the
Blu-ray Disc™ player to only turn on dynamic range control
if information embedded in the Dolby TrueHD sound track
tells it to do so.
If you don’t have a surround sound receiver connected
to the Blu-ray Disc™ player, you should leave the PCM
downsampling to 48 kHz, and proceed to the next setup
menu item.
EN
If you have a surround sound receiver connected tothe Blu-
ray Disc™ player, and you have connected to the surround
receiver via the Blu-ray Disc™ player’s HDMI output, this
setting has no effect on the audio going to the HDMI output
of the player.Leave the PCM downsampling to 48 kHz, and
proceed to the next setup menu item.
Stereo Downmix:
Select whether to downmix the multi-channel audio into
fewer channels.
•
Auto — Downmixes the multi-channel audio into
the specific stereo that the connected equipment
supports.
NOTE: Incorrectly setting the digital audio output’s PCM
sampling rate too high may result in unpredictable audio
playback.
•
Stereo (LoRo) — Downmixes the multi-channel audio
into two channel stereo. Choose when the Blu-ray
Disc™ player is connected to the equipment that does
not support virtual surround function such as Dolby
Pro Logic.
Digital Output:
•
PCM Stereo — Sets the output to PCM Stereo if you
do not have an audio receiver connected to your Blu-ray
Disc™ player or the audio receiver connected to Blu-ray
disc player is not a 5.1/7.1 channel receiver.
•
Surround Encoded (LtRt) — Downmixes the multi-
channel audio into surround compatible stereo.Choose
when the Blu-ray Disc™ player is connected to the
equipment that supports virtual surround function such
as Dolby Pro Logic.
•
Bitstream HD — Lets your player send Dolby TrueHD
or DTS-HD MA bitstreams over HDMI (if your player is
connected to a compatible HDMI audio receiver).If your
player is not connected to a compatible HDMI receiver
(for example, your player is connected directly to the
TV, a compatible audio signal is automatically sent
over the HDMI connection. With this setting, Blu-ray
audio is limited to the soundtrack for the main movie
(no PIP audio).
Language Setting
1. In the main menu of Settings, press button, then use
/
•
•
Bitstream Legacy — Sends a DTS or Dolby Digital
bitstream from the disc over the HDMI connection.
Blu-ray audio is limited to the soundtrack for the main
movie (no PIP audio).
button to select Language, and then press OK.
to select OSD, Menu, Audio or Subtitle,
2. Press /
and then press OK.
3. Use
/
press OK to confirm your selection.
to select your preferred language, and then
Bitstream Mixed — Sends a DTS or Dolby Digital
bitstream over the HDMI or Coaxial connection. This
mode is primarily intended for use when you want to
hear both PIP audio and the movie audio.
4. Press to go to the previous menu.
OSD:
•
•
PCM 5.1 — Sends a PCM audio signal of up to 5.1
channels over the HDMI connection.
This option enables you to select the on-screen menu
language.
PCM 7.1 — Sends a PCM audio signal of up to 7.1
channels over the HDMI connection.
Menu:
This option lets you to select the disc menu language.
Dynamic Range Control:
Notes:
Dynamic Range Control means that you can allow the Blu-
ray Disc™ player to make the loud parts of a movie’s audio
track quieter than they would be in the theatre, without
making the dialog of the actors any quieter.
•
•
Not all languages are available on all discs.
Most discs only have one menu language.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
•
•
5 [PG-R] — Parental guidance recommended.
Audio:
6 [R] — Not suitable for anyone under 17 unless
supervised by a parent or adult guardian.
You can choose the audio language from this option to
your preference.
•
•
7 [NC-17] — Not suitable for anyone under 17.
Notes:
•
•
Not all languages are available on all discs.
8 [Adult] — All Blu-ray discs and DVDs can be
played.
Some discs do not let you select the audio language
using your player’s menu. Instead, you have to select
the audio language from the disc setup menu (the menu
that appears after you insert the disc).
4. Press to go to the previous menu.
Setting the parental control password
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
Subtitle:
You can customize your preferred subtitle language in
this option.
2. Press
OK.
/
to select Parental Password, then press
Notes:
3. Enter a 4-digit number for the parental password, then
use to highlight Ok, and then press OK to confirm.
If you forget your password, reset your player to the
factory defaults. For more information, see “Restore
factory defaults” on page 25.
•
•
Not all languages are available on all discs.
Some discs do not let you select the subtitle language
using your player’s menu.Instead, you have to select the
subtitle language from the disc setup menu (the menu
that appears after you insert the disc).
4. Press to go to the previous menu.
•
You can also select the subtitle language from the
subtitle menu in the on-screen menu.
System Setting
Parental Control
1. In the main menu of Settings, press button, then use
/
button to select System, then press OK.
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
2. Press
3. Use
/
to select an option, and then press OK.
/
OK to confirm.
to select the desired setting, and then press
2. Press
3. Use
/
to select an option, and then press OK.
to select the desired option, and then press
/
OK to confirm your selection.
4. Press to go to the previous menu.
4. Press to go to the previous menu.
Optical Disc Auto Play:
Note: If Parental Control was previously turned On, you
will be prompted to enter the parental control password
before being allowed to change these settings. (See
“Turning parental control on or off” for details.)
If Enable is selected, it will load data and play back
automatically when you insert a Blu-ray disc.WhenDisable
is selected and if you insert a Blu-ray disc, the disc you can
select will be displayed on the Settings menu.
Selecting the parental country
Media Player:
Parental Country is fixed in USA.
Media Player function enables you to create an
interoperability network with other devices for resource
sharing based on a network.
Turning parental control on or off
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
Screen Saver Duration:
This Blu-ray Disc™ player has a screen saver feature that
turns the screen black when your player is inactive.You can
set the interval time you want your player to wait before
activating the screen saver.
2. Press
OK.
/
to select Parental Control, then press
3. Press
/
to select On or Off, then press OK.
4. Press to go to the previous menu.
Note: The unit shuts down automatically in about thirty
minutes if it remains idle and no activities are made.
Setting the parental control level
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
CEC Support:
This option is used to allow the TV remote control to
control certain functions of the Blu-ray Disc™ player; and
for the Blu-ray Disc™ player to control certain functions
of the TV.
2. Press
3. Press
/
/
to select Parental Level, then press OK.
to select the rating level you want to block,
then press OK. The rating and all higher ratings will be
blocked.You can select:
On: Allow mutual control of devices through HDMI.
•
•
•
•
1 [Kid Safe] — Suitable for all children.
2 [G] — General audiences.
Off: Do not allow CEC control.
Notes:
•
3 [PG] — Parental guidance suggested.
4 [PG-13] — Not suitable for anyone under 13.
Not all TVs are compatible with your Blu-ray Disc™
player.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
•
The default setting is Off. Select On if CEC control is necessary.
Update Via Network:
This option displays the required storage space if the Blu-ray Disc™ player is connected to internet for upgrade.
For detailed upgrade operation, please refer to “UpgradingYour Player’s Firmware” on this page.
Restore factory defaults:
Choose one of the options, then press OK to pop up a dialog box, choose Ok in the box, and then press OK to
confirm.
To apply the deactivation, please plug off the player after operating deactivation.
Actions
Response
Restore factory settings and deactivate All settings (including Parental Password) will be restored to the factory
all connected applications
Restore factory settings
defaults and all connected applications will be deactivated.
EN
Restores all settings (including Parental Password) to the factory defaults.
Deactivate all connected applications Deactivates all connected applications
Deactivate Netflix
DeactivateYouTube
Deactivate Picasa
Deactivates the connected Netflix application
Deactivates the connected YouTube application
Deactivates the connected Picasa application
UpgradingYour Player’s Firmware
This player needs to stay up to date to make sure that you have the latest features available.This is done with a software
update.You may periodically see a screen that prompts you to update your firmware. It is highly recommended that you
apply all updates available to enhance and enjoy product features.
Automatic updates over the Internet
1. Make sure that your player is successfully connected to the Internet.If new firmware is available, you will see a message
prompting you to update your firmware. Follow the directions in the update program to complete the firmware update
procedure for the player.
2. Use
/
on the TV screen.
to highlight “OK”, and then press OK. The software will begin downloading, and a status bar will appear
3. After the firmware update has completed successfully, a message will appear indicating the player will automatically
turn itself off and restart.
Note: Never turn off the player during a firmware update process. Let the firmware update process finish.
Toshiba of Canada Ltd. will not be responsible for damage or malfunction caused to the player by an unstable internet
connection or consumer negligence during firmware updates.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
4. Press
/
press OK to test your network connection.
/
/
to highlight Network Test, and
Network Connection Setting
5. Press or RETURN to go to the previous menu.
1. Press /
button,
to select Network in stop mode, then press
Configuring a wireless Internet connection
This section describes how to configure the Blu-ray Disc™
player for accessing the internet via aWiFi connection.The
procedure for connecting to a wireless network depends
on various network parameters. Read the following
configuration methods to determine which instructions to
use to connect to your network.
I. If no Ethernet cable is connected to the ETHERNET
jack on the back of your player, a screen similar to the
following appears:
Wireless
I. Connection to the wireless Network which you
select
Network List
WiFi Protected Setup (WPS)
Manual
a. Connecting to an Unencrypted Wireless Network
b. Connecting to an Encrypted Wireless Network
II. Connection to the wireless Network using Wi-Fi
Protected Setup (WPS)
IP Settings
a. Connecting to a Wireless Network Using WPS
Pushbutton
b. Connecting to a Wireless Network Using WPS PIN
For detailed operations, refer to the “Configuring a
wireless Internet connection”.
II. If a wired connection is made to your player, a screen
similar to the following appears:
III.Connection to the wireless Network using Manual
IP Configuration
Wired IP Settings
Description of the Wireless Network List Display
Link Status
MAC Address
IP Mode
Link up
Choosing “Network List” in the wireless network setup
menu will cause a list of availableWiFi networks to appear,
as shown below:
00:23:18:75:b1:2b
Dynamic
IP Address
Subnet Mask
Gateway
128.60.3.31
255.255.0.0
128.60.1.1
128.60.1.41
128.60.1.42
Network List
a
WiFi
WiFi
WiFi-me*
Panda
Primary DNS
Secondary DNS
b g n
dlink_media
NTGR 11g
Airport_SN
a
WiFi
WiFi
WiFi
Apply
Cancel
Network Test
b g
b g
Refer to the“Configuring a wired Internet connection”
for details.
Note:“Wireless”and“Wired”are optional and do not appear
at the same time. Normally, “Wireless” is shown without
wired connection.While using a wired Internet connection,
“Wireless” is disabled and “Wired” is activated.
Configuring a wired Internet connection
1. Press
/
button to enter the following screen:
to select Network in stop mode, then press
If the network connection is active, Link Up appears next
to Link Status. If the network connection is not active,
Link Down displays next to Link Status.
2. Press
3. Press
/
/
to select IP Mode, then press OK.
to select an IP mode.You can select:
•
Manual — Lets you manually configure network
settings, such as IP address, subnet mask, and
gateway settings.
•
Dynamic — Uses DHCP to automatically obtain an
IP address.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
The symbols that might appear next to each listed wireless
network in the network list are as follows:
I. Connection to the wireless Network which you
select
Category Icon
Connected
Definition
Wireless
When the Blu-ray Disc™
player is turned on, it will
connect to the wireless
Network List
WiFi Protected Setup (WPS)
Manual
network displaying this symbol.
Typically, this is the last
wireless network connected
before powering down.
IP Settings
1. In the “Wireless” menu, press
/
to select Network
Indicates that the Blu-ray
Disc™ player is currently
connected to this network.
List, then press OK. A list of existing wireless networks
near the Blu-ray Disc™ player will appear (It may
take several seconds for this list to be created). For
example:
*
EN
Saved
The wireless network
properties have been saved
in the Blu-ray Disc™ player’s
memory.
Network List
a
WiFi
WiFi
WiFi-me*
Panda
Wireless
Security
The wireless network data is
not encrypted.
b g n
dlink_media
NTGR 11g
Airport_SN
a
WiFi
WiFi
WiFi
The wireless network data
is encrypted; a ‘security key’
must be entered so that the
Blu-ray Disc™ player can
share data over the network.
b g
b g
2. Press
/
press OK to confirm.
to select the desired wireless network, and
The wireless network data
is encrypted; the encryption
scheme is not supported by
the Blu-ray Disc™ player.
a. If the Blu-ray Disc™ player is connected to an
Unencrypted Wireless Network, a menu similar to
the following will appear:
Wireless
Protocol
The wireless network
supports 802.11a
a
WiFi-me
The wireless network
supports 802.11b
b
g
n
Connect
WPS Pin
Cancel
The wireless network
supports 802.11g
Name and Password are case-sensitive
3. Press
/
to highlight Connect, and press OK. If the
icon and a message
The wireless network
supports 802.11n
wireless network is functioning,
“Connection to XXX...Success” will appear on the TV.
The wireless router supports
the WPS standard.
4. Press OK to close the message. The Blu-ray Disc™
player is now connected to the network. From now on,
when you turn on the player, it will automatically connect
to the network; there is no need to repeat these steps
again.
Signal
Strength
Strong Signal
Good Signal
Medium Signal
Weak Signal
No Signal
Note: If you do not see this message, the Blu-ray Disc™
player was not able to connect to the network.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
b. If the Blu-ray Disc™ player is connected to an
Encrypted Wireless Network, a menu similar to the
following will appear:
a. If the Blu-ray Disc™ player is connected to a
Wireless Network Using WPS Pushbutton:
2. Press
/
then press OK.
to select WiFi Protected Setup (WPS),
WiFi-me
Password
WiFi Protected Setup (WPS)
Connect
WPS Pin
Cancel
Please press the button on your router now
Press ENTER to open keyboard
Network Name (SSID)
Password is case-sensitive
Cancel
3. Press OK(ENTER) to activate the on-screen keyboard.
Carefully enter the network password by using the
to highlight the desired letter on the keyboard,
and then pressing OK. (If you make a mistake, use the
/
/
/
3. Press the WPS button on the top of your router.
4. Once you see “Success” on the button at the bottom of
the screen, the Blu-ray Disc™ player is connected to
the router.
backspace
key to erase the mistake.)
Done
on the upper-right
corner of the keyboard, and press OK to remove the
4. Use
/
/
/
to highlight
Note: If you do not see this message, the Blu-ray Disc™
player was not able to connect to the network. Repeat
steps 1-4 again.
keyboard from the screen.
Done
1 2 3 4 5 6 7 8 9 0
b. If the Blu-ray Disc™ player is connected to a
Wireless Network Using WPS PIN:
p
;
q w e r t y u
o
i
a s d f g h j k l
2. Press
/
to select Network List, then press OK. A
,
.
z x c v b n m
- =
/
'
list of existing wireless networks near the Blu-ray Disc™
player will appear (It may take several seconds for this
list to be created).
Space
[
]
`
\
3. Press
/
press OK to confirm.
to select the desired wireless network, and
5. Use
to highlight Connect, and press OK. If the
icon and a message
wireless network is functioning,
4. Press /
following screen will appear:
to highlight WPS PIN, and press OK. The
“Connection to XXX...Success” will appear on the TV.
6. Press OK to close the message. The Blu-ray Disc™
player is now connected to the network. From now on,
when you turn on the player, it will automatically connect
to the network; there is no need to repeat these steps
again.
WiFi-me
Password
Connect
Press ENTER to open keyboard
Password is case-sensitive
WPS Pin
Cancel
Notes:
•
If you do not see this message, the Blu-ray Disc™ player
was not able to connect to the network.
•
If the wireless network is encrypted using an
unsupported encryption (it appears in the network
list with an icon), you cannot connect to the network.
You must change the router’s encryption type before
proceeding.
5. Press
/
and press OK.
to highlight connection method you desire,
6. Follow the on-screen message to continue operating
the connection.
II. Connection to the wireless Network using Wi-Fi
protected Setup(WPS)
III. Connection to the wireless Network using Manual
IP Configuration
1. Press
/
button to enter the following screen:
to select Network in stop mode, then press
1. In the “Wireless” menu, press
then press OK.
/
to select Manual,
2. Follow the on-screen message to continue operating
the connection.
Wireless
Network List
WiFi Protected Setup (WPS)
Manual
IP Settings
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Connected Applications
Watching Movies with Netflix®
To start playing movie.
To pause playback while in PLAY mode.
To use Netflix service, connect this player to your
network, and make the network settings if they are not
finished yet.
To stop playing and return to a list of
movie titles.
To pause playing movie.
To start playing while in PAUSE mode.
1. Launching Netflix movie
In Home Menu, press
, and then press
press OK to enter.
/
to select Connected, then use
to highlight “Netflix”, and then
/
To pause playing and open a list of scenes.
Pressing further proceeds to the next
scene.
2. Creating Netflix account
If you are not a Netflix Member:
To pause playing and open a list of scenes.
Pressing further proceeds to the previous
scene.
Select “no”. Read the instructions displayed on the TV
PC. Sign up to create your account, then select “I’m now
a member”.
EN
To stop playing and return to a list of movie
titles.
To pause playing and open a list of scenes.
Fast forward play starts.
To pause playing and open a list of scenes.
Fast reverse play starts.
HOME To stop playing and return to Home Menu.
MENU
OK
To pause playing of Trick play screen while
in PLAY mode.
If you are a Netflix Member:
To start playing the movie in case of during
Trick play screen.
Select “Yes”.
3. Activating Netflix player
Note: Resolution of video streamed from Netflix varies
depending on communication speed or bitrate of each
content, etc.
To play streaming video via Netflix service, Netflix player
needs to be activated. Read the instructions displayed on
your PC.Sign in to your Netflix account, if necessary.Enter
the activation code displayed on the TV screen.
Watching Movies withYouTube®
1. In Home Menu, press
2. Press , then press
then press OK to confirm.
/
to select Connected.
to highlight YouTube, and
/
3. Please enjoy any contents.
Browsing Photos with Picasa®
Signing in with your account
To display photos in your web album on the screen, you
need to sign in with your Picasa account.
4. Preparing Instant Queue
To play streaming video via Netflix service, Netflix player
needs to be activated. Read the instructions displayed on
your PC.Sign in to your Netflix account, if necessary.Enter
1. In Home Menu, press
2. Press , then press
press OK to confirm.
/
to select Connected.
to highlight Picasa, and then
/
3. Enter your user name using the virtual keyboard, and
press OK while [OK] is selected.
the activation code displayed on the TV screen.
Now you can view Netflix streaming video.
4. Enter the password using the virtual keyboard, and
press OK while [OK] is selected.
After having activated Netflix player and prepared Instant
Queue, movies and TV episodes in your Instant Queue
appear on the TV screen. Select your desired one using
the remote control of the player. You can control Netflix
streaming video with the following keys of the remote
control of this player:
Your web album is displayed on the screen.
Creating a new Picasa account on your PC
account.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting & Maintenance
Troubleshooting
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following
checklist.
Problem
Solution
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in
again.
No sound or picture
- Check if the connected TV is turned on.
- Check if the connections are made securely and correctly.
- Check whether the connected TV or other device supports HDCP. (This unit
will not output a video signal unless the other device supports HDCP.)
- Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
Distorted picture
- Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
- Connect this unit directly to the TV.
Completely distorted picture or
black / white picture with Blu-
ray Disc™ / DVD
- Make sure the disc is compatible with this unit.
No sound or distorted sound
- Adjust the volume.
- Check if speakers are connected correctly.
- Check the HDMI connections.
- Check the settings in “Audio” menu.
Picture freezes momentarily
during playback
- Check the disc for fingerprints / scratches and clean with a soft cloth wiping
from center to edge.
- Clean the disc.
Disc cannot be played back
- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
No return to start-up screen
when disc is removed
- Reset this unit by turning it off, then on again.
The unit does not respond to
the remote control
- Aim the remote control directly at infrared sensor window on the front panel.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+ / - signs) as indicated.
Buttons do not work or the unit
stops responding
- To completely reset the unit, unplug the AC cord from the AC outlet for 5-10
seconds.
The unit does not respond to
some operating commands
during playback
- Operations may not be permitted by the disc.
Refer to the instructions of the disc.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting & Maintenance
Problem
Solution
The unit cannot read Blu-ray
Disc™ / DVD/ CD
- Dew condensation may form inside the unit. Do not use this unit for at least a
few hours until its inside gets dry.
- Wipe the dirt off the disc or replace the disc.
Angle does not switch
- The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain
multiple angles.
In some cases multiple angles are only recorded for specific scenes.
Playback does not start when
the title is selected
- Check the settings in “Parental” menu.
The password for rating level has - If you forget your password, reset your player to the factory defaults and your
forgotten password will be cleared. For more information, see “Restore fac-
tory defaults” on page 25.
been forgotten
EN
Cannot connect to the network
- Check if the LAN cable connection is properly made.
- Turn on the modem or broadband router.
- Check if the broadband router and/or modem is correctly connected.
- Check the “Network Connection Setting”.
Cannot connect to the network
while my PC is connected to the
network
- Check the content of your Internet service contract to see if your Internet
service provider prevents multiple terminals connecting at the same time.
Cannot use the BD-Live™
function
- Use a USB flash drive with enough space.
Notes:
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual
for details on correct operations.
Some functions are prohibited on some discs.
•
Maintenance
Servicing
•
•
Please refer to relevant topics on “Troubleshooting & Maintenance” before returning the product.
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call our helpline to locate an Authorized Service Center.
Cleaning the cabinet
•
Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such
chemicals may discolor the surface or damage the unit.
Cleaning discs
•
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a
circular motion.
•
Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents
or antistatic spray intended for analog records.
Cleaning the disc lens
•
If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this
manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.
Disc handling
•
•
•
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to playback such discs, as they may damage the unit.
IR signal check
•
If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog Audio
Dolby® Digital Plus
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound.
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Aspect Ratio
Dolby® TrueHD
The width of a TV screen relative to its height.
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports
7.1 multi-channel surround sound output.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
DTS®
AVCHD
DTS is
a
multi-channel surround sound system. By
AVCHD is
a
new format for high definition video
connecting to DTS decoder, you can enjoy movie dynamic
and realistic sound like movie theater. DTS surround
sound technologies were developed by DTS, Inc.
camcorders which can record and play high-resolution
HD images.
BD-Java
DTS-HD®
With some Blu-ray Disc™ which support Java
applications, you can enjoy the interactive functions such
as games or interactive menus.
DTS-HD is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
BD-Live™
BD-Live is a BD-video (BD-ROM version 2 Profile 2.0/
Profile 1.1) which contains new functions (e.g. Internet
connection), in addition to the BONUSVIEW function.
Gateway
IP Address of the electronic devices (such as router)
which provide Internet access.
Blu-ray Disc™ (BD)
HDMI (High-Definition Multimedia Interface)
Blu-ray Disc™ is a next generation optical video disc which
is capable of storing much more data than a conventional
DVD is. The large capacity makes it possible to benefit
from the features such as high-definition videos, multi-
channel surround sounds, interactive menus and so on.
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Hub
Chapter
A
network.
device used for connecting multiple device to the
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
IP Address
Component Video Output
A set of numbers which are assigned to devices
participating in a computer network.
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture Color as it is. Also, due to compatibility with
progressive video (525p/480p), you can experience
higher-density picture than that in interlace (525i/480i).
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You
can copy JPEG files on BD-RE/-R, DVD-RW/-R or CD-
RW/-R from a computer and play back the files in this
unit.
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
LAN (Local Area Network)
A group of computer networks covering a small area like
a company, school or home.
playback,
analog signal based on these numbers.
a
digital-to-analog converter generates an
Local Storage
A storage area of sub contents for playing virtual
packages on BD-video.
DNS Server
A server which translates Internet domain names into IP
addresses.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files.You can copy MP3
files on BD-RE/-R, DVD-RW/-R or CD-RW/-R from the
computer and play back the files on this unit.
Dolby® Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo (2ch) or
multi-channel audio.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
PCM (Pulse Code Modulation)
Subnet Mask
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality that requires a
lot of data compared to formats such as Dolby Digital and
MPEG audio.For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital, DTS, and MPEG audio
to PCM.
A mask which is used to determine what subnet an IP
address belongs to.
Title
A collection of chapters on BD-video or DVD-video.
Track
Audio CD use tracks to divide up the content of a disc.
a
Proxy Server
The BD-video or DVD-video equivalent is called
chapter. See also “Chapter”.
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
Virtual Package
The function which copies data to other media (local
storage) from the Internet and play the secondary video,
secondary audio and the subtitle at the same time. The
method of the playback varies depending on discs.
Region Code
EN
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes.You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R
or CD-RW/-R from a computer and play them back on
this unit.
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
x.v.Color
Sampling Frequency
“x.v.Color” is a promotion name given to the products that
have the capability to realize a wide color space based
on the xvYCC specifications and is a trademark of Sony
Corporation.
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Specifications
General
Signal system
NTSC color
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
120 V AC, 60 Hz
15 W
360 × 36 × 192.7 mm
1.02 kg
Operating temperature
Operating humidity
41°F (5°C) to 95°F (35°C)
Less than 80 % (no condensation)
Terminals
HDMI output
HDMI jack x 1
Video: 480i, 480p, 720p, 1080i, 1080p, 1080p/24F / Audio
Audio output (Coaxial digital)
RCA jack x 1
0.5 Vp-p (75 Ω)
USB terminal x 1
LAN terminal
5V
500mA
100BASE-T
Note:
• The specifications and design of this product are subject to change without notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
For Toshiba Brand Digital Audio/Video Products
Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE
LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS TOSHIBA BRAND DIGITAL AUDIO/VIDEO PRODUCT (the “DAV PRODUCT(S)” or “DAV Product (s)” AS A
GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED IN CANADA,AND USED ANYWHEREOUTSIDE OF CANADA INCLUDING,WITHOUT
LIMITATION,THE UNITED STATES AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION, THE
UNITED STATES AND MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE WARRANTIES.
improper installation, improper operation, improper
cleaning, improper maintenance, normal wear and
tear, or any other external cause or event, act or
omission outside the control of TCL, including
fire, theft, acts of God, alteration, power failures,
power surges or power shortages, lightning,
other electrical faults, or repairs, modifications
or replacements by persons other than those
authorized by TCL to service the DAV Product;
b. Replacement of missing, discarded or lost parts, the
provision of retrofits, or preventive maintenance;
c. Repair of damage that is cosmetic only or does not
affect the DAV Product functionality, such as wear
and tear, scratches and dents;
d. Service on Toshiba-branded accessory items (such
accessory items may be covered by their own
warranty);
e. Service on third party products or service made
necessary by use of incompatible third party
products;
Limited One (1)Year Warranty on Parts and Labour
Subject to the more limited warranty if the DAV Product
is used for any commercial or business purposes as set
out below, TCL warrants the DAV Product and its parts
against material defects in materials or workmanship that
result in the DAV Product failing for a period of one (1)
year after the date of original retail purchase. DURING
THIS PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR
OR REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART,WITHOUT CHARGETOYOU FOR
PARTS OR LABOUR.YOU MUST DELIVERTHE ENTIRE
DAV PRODUCTTO ATCL DAV PRODUCT AUTHORIZED
SERVICE PROVIDER (“ASP”).YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR
THE DAV PRODUCT TO AND FROM THE ASP.
Rental Units – The warranty for DAV Product rental
units begins with the date of first rental or thirty (30) days
from the date of shipment to the rental firm, whichever
comes first.
f. Service made necessary by the simultaneous use of
this DAV Product and connected equipment;
g. Modifications to the DAV Product not approved in
writing by TCL, and service made necessary by the
use or installation of non-Toshiba modifications to
the DAV Product;
h. Service of a DAV Product on which the TOSHIBA
label or logo, rating label or serial number have been
defaced or removed;
i. On-site service and repair of the DAV Product;
j. Damage to the DAV Product caused by failure to
follow the specifications, User manuals or guides as
to usage and/or storage.
Limited Warranty for Commercial Units
TCL warrants DAV Products that are used for any
commercial or business purposes as follows: all parts
are warranted against material defects in materials or
workmanship that result in the DAV Product failing for a
period of ninety (90) days after the date of original retail
purchase. DURING THIS PERIOD, TCL WILL, AT TCL’S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART
WITH A NEW OR REFURBISHED PART, WITHOUT
CHARGETOYOU FOR PARTS OR LABOUR.YOU MUST
DELIVER THE ENTIRE DAV PRODUCT TO AN ASP.
YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE DAV PRODUCT TO
AND FROM THE ASP.
Disclaimer and Limitation of Remedy
Your Responsibility
TO THE EXTENT NOT PRECLUDED BY LAW, ALL
OTHER EXPRESS AND IMPLIED WARRANTIES,
CONDITIONS AND REPRESENTATIONS FORTHIS DAV
PRODUCT, INCLUDING THE IMPLIED WARRANTIES
AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED AND EXCLUDED. IF THE
APPLICABLE LAW, STATUTORY OR OTHERWISE,
PRECLUDES THE EXCLUSION OF ANY IMPLIED
WARRANTIES, CONDITIONS AND REPRESENTATIONS
THEN SUCH IMPLIED WARRANTIES, CONDITIONS
AND REPRESENTATIONS ARE OTHERWISE LIMITED
IN DURATION TO THE TEAM OF THIS EXPRESS
WRITTEN LIMITED WARRANTY.TO THE EXTENT NOT
PRECLUDED BY LAW, STATUTORY OR OTHERWISE,
THIS WRITTEN WARRANTY SUPERCEDES AND
SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY,
THE ABOVE WARRANTIES ARE SUBJECT TO the
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of
purchase.
(2) All warranty servicing of this DAV Product must be
performed by an ASP.
(3) The warranties from TCL are effective only if the DAV
Product is (i) purchased as new and unopened from
TCL or from TCL’s authorized distributors, dealers
or resellers (“ADR’s”) and (ii) located/operated in
Canada.
(4) Warranties extend only to material defects in materials or
workmanship as limited above, and do not extend to:
a. Service, repairs or replacement made necessary
by accident, misuse, abuse, moisture, liquids, dust,
dirt, neglect, accedent, damage, 24/7 applications,
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
may have to commence or participate in any representative
or class proceeding against the Related Parties relating
to any Dispute. If any where applicable and to the extent
not preculded by law, you further agree to opt out of any
such representative or class proceedings.Arbitration of any
Dispute will be conducted in the forum and in the manner as
agreed to between you and TCL. Failing such agreement,
the arbitration will be conducted by one arbitrator pursuant
to the laws and rules relating to arbitration generally in
force in the jurisdiction in which you reside at the time that
the Dispute arises. To the extent not precluded by law, no
claim, dispute, controversy or disagreement of any other
person may be joined or combined with any Dispute by
you, without the prior written consent of TCL.
CONDITION OR REPRESENTATION NOT STATED
IN THIS WARRANTY, WHETHER MADE BY TCL,
TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs
AND ASPs AND WHETHER MADE ORALLY OR IN
WRITING (INCLUDING ANY STATEMENT IN ANY
BROCHURE, PRESS RELEASE, ANNOUNCEMENT,
ADVERTISEMENT, POINT OF SALE DISPLAY, ETC.).
YOU MUST READ AND FOLLOW ALL SET-UP AND
USAGE INSTRUCTIONS IN THE APPLICABLE USER
GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO,
THIS DAV PRODUCT MAY NOT FUNCTION PROPERLY
AND YOU MAY SUFFER DAMAGE. THIS WARRANTY
WILL NOT COVER ANY SERVICE THAT IS REQUIRED,
IN PART OR INWHOLE, AS A RESULT OF ANY FAILURE
TO FOLLOWTHE SET-UP AND USAGE INSTRUCTIONS.
THIS WARRANTY DOES NOT APPLY AND SHALL BE
VOID AND UNENFORCEABLE IF THE DAV PRODUCT
IS OPENED, SERVICED, OR REPAIRED BY PERSONS
OTHER THAN THOSE AUTHORIZED BY TCL TO
SERVICE OR REPAIR THE DAV PRODUCT.
EN
Critical Applications
The DAV Product you have purchased is not designed
for any “critical applications.” “Critical applications” means
life support systems, medical applications, connections
to implanted medical devices, commercial transportation,
nuclear facilities or systems or any other applications where
DAV Product failure could lead to injury to persons or loss
of life or catastrophic property damage.
IF THE DAV PRODUCT FAILS TO WORK AS
WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE
REMEDY SHALL BE REPAIR OR REPLACEMENT
OF THE DEFECTIVE PART. IN NO EVENT WILL TCL,
TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs
OR ASPs (THE “RELATED PARTIES”) BE LIABLE TO
YOU OR ANY THIRD PARTY FOR ANY DAMAGES.
MONEY, REIMBURSEMENT, COSTS OR EXPENSES.
THIS LIMITATION APPLIES TO DAMAGES, MONEY,
REIMBURSEMENT, COSTS OR EXPENSES OF ANY
KIND WHATSOEVER INCLUDING ANY DIRECT OR
INDIRECT DAMAGES, DAMAGE TO PROPERTY
OR PERSON, LOST PROFITS, LOST SAVINGS,
INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL,
EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER FOR BREACH OFWARRANTY, BREACH OF
CONTRACT,TORT (INCLUDING NEGLIGENCE), UNDER
A STATUTE OR UNDER ANY OTHER LAW OR FORM OR
ACTION, ORWHETHER ARISING OUT OFTHE USE OF
OR INABILITY TO USE THE DAV PRODUCT, EVEN IF
ANY OF THE RELATED PARTIES HAS BEEN ADVISED
OFTHE POSSIBILITY OF SUCH DAMAGES OR OF ANY
CLAIM BY ANY OTHER PARTY.
IF THE CUSTOMER USES THE DAV PRODUCT IN ANY
CRITICAL APPLICATION, THE CUSTOMER-AND NOT
TCL, ITS AFFILIATES, ADRs OR ASPs - ASSUME SOLE
AND FULL RESPONSIBILITY FOR SUCH USE. TCL
RESERVES THE RIGHT TO REFUSE TO SERVICE ANY
DAV PRODUCT USED IN A CRITICAL APPLICATION.
TCL, ITS AFFILIATES, ADRs and ASPs HEREBY
DISCLAIM ANY AND ALL LIABILITY, DAMAGES AND
CONSEQUENCES ARISING OUT OF THE SERVICE
OR REFUSAL TO SERVICE SUCH DAV PRODUCT
AND FURTHER DISCLAIM ANY AND ALL LIABILITY,
CONSEQUENCES AND DAMAGES THAT MAY ARISE
OR RESULT FROM THE USE OF THE DAV PRODUCT
IN ANY CRITICAL APPLICATIONS.
General Provisions
If and to the extent that any provision of this limited warranty
should generally be found to be unenforceable, the
unenforceable provision shall be severed from the warrany
and deemed not to form part of the warranty.The remaining
provisions of this warranty shall be and remain valid and
enforceable. If and to the extent that any provision of this
limited warranty as it relates to any of the Related Parties
is found to be invalid or unenforceable in respect of that
party (the “Excluded Party”), the Excluded Party shall be
deemed to be severed or excluded from the provision, and
the provision shall remain valid, enforceable and applicable
in respect of the other or remaining Related Parties.
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of these
warranties in any manner whatsoever.
Arbitration and Dispute Resolution
To the extent not precluded by law, any claim, dispute,
controversy or disagreement (whether for breach of
warranty, breach of contract, tort (including negligence),
under a statute or under any other law or form of action)
against any of the Related Parties arising out of , or
otherwise relating to:(i) this warranty;(ii) theDAV Product;
(iii) any oral or written representations, statements,
brochures, press releases, advertising, announcement,
point of sale display, or promotional material relating to
the DAV Product; (iv) the relationships that result from this
warranty, (the foregoing claims, disputes controversies and
disagreements are collectively referred to as the“Dispute”),
shall be referred to any resolved by final and binding
arbitration (to the exclusion of the courts). To the extent
not precluded by law, you agree to waive any right that you
To the extent permitted by law, this limited warranty shall
be governed and construed in accordance with the laws
of Ontario.
If there is any inconsistency between this limited warranty,
on the one hand, and any statement in the packaging of
the DAV Product or in any other document enclosed with,
or used in the context of the promotion or sale of, the DAV
Product, on the other hand, the provisions of this limited
warranty shall prevail.
How to Obtain Warranty Services
If, after following all of the operating instructions in
this manual and checking the “Before Calling Service
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Personnel” section, you find that service is needed:
Software belongs to Toshiba and/or its suppliers,
including BSQUARE Corporation and/or its suppliers.
The Software is protected by copyright laws, Universal
Copyright Convention, and other laws and conventions
related to intellectual property rights. The content of the
Software and manual is subject to change by Toshiba
without notice.
(1) To find the nearest ASP, visit TCL’s web site at
(2) Present your bill of sale or other proof of purchase to
the ASP.
For additional information, visit TCL’s website:
Article 2 License Grant and Use Conditions
Toshiba grants to you a personal, non-transferable and
non-exclusive right to use the copy of the Software in
accordance with this EULA.You may permanently transfer
all of your rights under this EULA, provided you transfer
complete Blu-ray Disc™ Player together with all of the
Software, you retain no copies, and the recipient agrees
to the terms of this EULA. If the Software is an upgrade
version, any transfer must include all prior versions of the
Software. For maintenance purposes, you may update
the version of the Software only for the Blu-ray Disc™
Player that is owned by you.
Disclaimer
1080p capable display is required for viewing in 1080p.
Viewing HD content and up-converting DVD content may
require an HDCP capable input on your display device.
While up-converting DVD video content may result in
a picture that appears to be near HD quality, results
may vary depending on content, display and settings.
Feature performance may vary and may also require
an always-on broadband internet connection. Firmware
update and additional bandwidth may be required. BD-
Live™ requires connection of a USB flash drive of at
least 1 GB (sold separately) to USB port. Performance
of interactive features may vary due to disc design or
content, and may also require an always-on broadband
internet connection. Firmware update may be required
for some interactive features. Some features may require
additional bandwidth. Third party internet services are
not provided by Toshiba, may change or be discontinued
at any time and may be subject to third party restrictions.
Toshiba makes no representations or warranties about
these services, which may require the creation of a user
account through a computer with internet access. Third
party internet service users may incur one-time and/
or recurring charges. For Dolby® TrueHD and DTS-HD
Master Audio | Essential™ playback, content encoded in
Dolby® TrueHD and DTS-HD Master Audio | Essential™
format required. Viewing 1080p/24 fps output requires
1080p/24 fps encoded content and an HD display capable
of accepting a 1080p/24Hz signal. Supported file types:
JPEG, MP3, WMA, and AVCHD. Some recordable media,
cards or files may not be supported.Product specifications,
information and availability are all subject to change
without notice.
Article 3 Prohibited Uses
Unless otherwise expressly provided in this EULA or
the product manual accompanying the Toshiba Blu-ray
Disc™ Player:
3.1. You may not copy the Software, in whole or in part,
without express written permission by Toshiba and/or
its suppliers.
3.2. You may not assign, resell, distribute or sublicense
the Software or a copy of the Software.
3.3. You may not create, assign, resell, or sublicense
secondary works of the Software without permission.
3.4. You may not modify, analyze, reverse engineer,
decompile or disassemble any part of the Software.
3.5. You may not combine or incorporate the Software
with or into any other application.
3.6. You may not print the Software.
Article 4 Disclaimer
4.1. THE HARDWARE PRODUCT LIMITED WARRANTY
IS SET FORTH IN THE DOCUMENTATION
ACCOMPANYING THE HARDWARE PRODUCT.
4.2. THE SOFTWARE IS PROVIDED “AS-IS” AND “AS-
AVAILABLE,”WITHOUTWARRANTIESOFANYKIND.
ALL WARRANTIES AND CONDITIONS, EXPRESS
OR IMPLIED, CONTRACTUAL OR STATUTORY,
INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, TITLE
OR NON-INFRINGEMENT ARE HEREBY WAIVED
BY YOU AND DISCLAIMED BY TOSHIBA.THIS
EULA REPRESENTS THE SOLE AND EXCLUSIVE
OBLIGATION OF TOSHIBA AND ITS SUPPLIERS
WITH RESPECT TO THE SOFTWARE.
END USER LICENSE AGREEMENT
This End User License Agreement (“EULA”) is a legal
agreement between you and Toshiba Corporation
(“Toshiba”) with regard to the copyrighted Software
provided with this EULA. Use of any software and related
documentation (“Software”) provided with a Toshiba Blu-
ray Disc™ Player, or made available by downloading or
otherwise to you by Toshiba in whatever form or media,
will constitute your acceptance of these terms, unless
separate terms are provided by the software supplier or
Toshiba in the documentation accompanying the Toshiba
Blu-ray Disc™ Player or otherwise, in which case certain
additional or different terms may apply. If you do not agree
with the terms of this EULA, do not use, download, install
or copy the Software. If you wish to return a complete
Blu-ray Disc™ Player system (hardware and software),
contact the retailer where you purchased the Blu-ray
Disc™ Player, and comply with the retailer’s standard
return policies and procedures.
Article 5 Limitation of Liability
TO THE MAXIMUM EXTENT NOT PROHIBITED BY
APPLICABLE LAW, IN NO EVENT SHALL TOSHIBA
AND/OR ITS SUPPLIERS BE LIABLE FOR PERSONAL
INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT,
PUNITIVE
OR
CONSEQUENTIAL
DAMAGES
WHATSOEVER, INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR ANY OTHER
COMMERNCIAL DAMAGES OR LOSSES, ARISING
OUT OF OR RELATED TO YOUR USE OR INABILITY
TO USE THE SOFTWARE, HOWEVER CAUSED,
Article 1 Definition
The Software means all programs contained in the
Toshiba Blu-ray Disc™ Player. The copyright of the
36
Download from Www.Somanuals.com. All Manuals Search And Download.
REGARDLESS OF THE THEORY OF LIABILITY
(CONTRACT, TORT, OR OTHERWISE) AND EVEN
IF TOSHIBA AND/OR ITS SUPPLIERS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE
LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES;
THEREFORE, THE ABOVE LIMITATIONS MAY NOT
APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
THE AGGREGATE LIABILITY OF TOSHIBA AND ITS
SUPPLIERS IN CONNECTION WITH THE SOFTWARE,
REGARDLESS OF THE FORM OF ANY LEGAL ACTION
OR PROCEEDING, SHALL BE LIMITED TO DIRECT
DAMAGES NOT TO EXCEED THE AMOUNT PAID FOR
THE TOSHIBA BLU-RAY PLAYER.
distributing the software component in executable format.
You can check the software components subject to such
EULA requirements on the following phone number:
Phone number: 1-800-631-3811
TOSHIBA provides a warranty for the TOSHIBA Blu-ray
Disc™ player you have purchased under conditions set
forth by TOSHIBA.
However, some of the software components distributed
under an EULA are made available for use by the user
on the assumption that they are not copyrighted or
warranted by TOSHIBA or any third party. These software
components are licensed to the user free of charge and
therefore not covered by any warranty within the scope of
the applicable laws. These software components are not
subject to any copyrights or other third-party rights and are
provided in “as is” condition without any warranty, whether
express or implied. “Warranty” here includes, but not
limited to, an implied warranty for marketability or fitness
for specific uses. All risks associated with the quality or
performance of these software components are assumed
by the user. TOSHIBA shall not be liable whatsoever
for any cost of repair or correction or other incidental
expense incurred in connection with a defect found in any
of these software components. Unless specified under the
applicable laws or in a written agreement, a party who
changes or redistributes the software with consent from
the copyright holders or based on the aforementioned
licenses shall not be held liable whatsoever for any loss
arising from the use of or inability to use such software
components. The same applies even when the copyright
holders or relevant third parties have been informed of
the possibility of such loss. “Loss” here includes normal,
special, incidental and indirect loss (including, but not
limited to, the loss of data or its accuracy; loss incurred
by the user or any third party; and interface incompatibility
with other software). Please read each EULA for details
on the use conditions and items that must be observed
regarding these software components.
Article 6 Export Control
Any export, directly or indirectly, of the Software in
contravention of the United States Export Administration
Regulations, or any other applicable law, regulation, or
order, is prohibited.
EN
Article 7 Termination of License
In the event that you fail to comply with any of the terms
and conditions contained herein, Toshiba shall have the
right to immediately terminate this Agreement without any
notification to you. Upon termination of this Agreement,
you shall cease all use of the Software and destroy all
copies, in whole and/or in part.
Article 8 Governing Law
This EULA is governed by the laws of Japan, without
references to the conflict of laws principles. Any and all
disputes arising hereunder shall be resolved exclusively
by the Tokyo District Court, Japan, and you hereby
consent to the exclusive jurisdiction of such court.
Article 9 Severability
If any provision of this EULA shall be held to be invalid,
illegal or unenforceable, the validity, legality and
enforceability of the remaining provisions hereof shall not
in any way be affected or impaired.
The table below lists the software components pre-
installed in the TOSHIBA Blu-ray Disc™ player, which are
subject to EULAs. The user should read the applicable
EULAs carefully before using these software components.
The EULAs are exhibited in their original text (English)
as exactly written by the respective parties other than
TOSHIBA.
(C) 2001-2010 Toshiba Corporation
The Software contains Macromedia® [Flash®] [Flash
Lite™] technology of Adobe Systems Incorporated.
Copyright© 1995-200[7] Adobe Systems Incorporated.
All rights reserved. Macromedia, Flash, Macromedia
Flash, [and Macromedia Flash Lite] are trademarks or
registered trademarks of Adobe Systems Incorporated in
the United States and other countries.
License information on the software used in the
TOSHIBA Blu-ray Disc™ player
This document is statement purpose only. Not concerned
with operation of this product.
The software pre-installed in the TOSHIBA Blu-ray
Disc™ player consists of multiple, independent software
components. Each software component is copyrighted by
TOSHIBA or a third party.
The TOSHIBA Blu-ray Disc™ player uses software
components that are distributed as freeware under a third-
party end-user license agreement or copyright notice
(hereinafter referred to as a “EULA”).
Some EULAs require that the source code of the
applicable component be disclosed as the condition for
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Open-Source Software Included in the Blu-ray
Disc™ Player:
Open-Source Software Included in the Kernel/Rootfs:
(*= source must be distributed on request)
A copy of the GPL license is provided in Appendix K
A copy of the LGPL license is provided in Appendix L
Software
License (*= source must be distributed
on request)
Utility
Base Version
License
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
zlib license
A copy of the GPL2.0 license is provided in Appendix K
A copy of the LGPL2.1 license is provided in Appendix L
*kernel
*arp
net-tools-1.52
GNU Bash-3.2
cramfs
*backtrace
GPL2
*bash
*directfb-extra GPL2
*cramfsck
*dhcpcd
*e2fsprogs
*fdisk
*cairo
LGPL2
GPL2
dhcpcd-1.3
e2fsprogs-1.41.5
fdisk-2.10m
TinyLogin-0.80
sysutils
*directfb
*iconv
LGPL2
openssl
BSD-old dual license.
The terms and conditions which apply to
this software are provided in Appendix H.
This product includes software developed
by the OpenSSL Project for use in the
OpenSSL Toolkit
*getty
*hostname sysutils
*ifconfig
*kill
net-tools-1.52
sysutils
(http://www.openssl.org)
*mkcramfs
*ntfs-3g
cramfs
curl
The terms and conditions which apply to
this software are provided in Appendix A.
ntfs-3g 2009.4.4
TinyLogin-0.80
sysutils
*passwd
*ps
*freetype
The terms and conditions which apply to
this software are provided in Appendix G.
Recommended advertisement is:
Portions of this software are copyright ©
<year> The FreeType
*route
net-tools-1.52
sfdisk-3.07
*sfdisk
*shutdown
*tinylogin
*hotplug
*utelnetd
*procps
sysutils
reserved.
TinyLogin-0.80
hotplug-1.8
utelnetd-0.1.3
procps-3.2.8
freetype-2.1.2
GNU Bash-2.05
GNU termcap 1.3
zlib-1.2.3
jpeg
expat
mng
png
xml
The terms and conditions which apply to this
software are provided in Appendix B.
The terms and conditions which apply to
this software are provided in Appendix I.
*libfreetype.so.6.3.
*libtermcap.so
*libtermcap.so.2.0.8
zlib
The terms and conditions which apply to this
software are provided in Appendix C.
The terms and conditions which apply to this
software are provided in Appendix D.
The terms and conditions which apply to this
software are provided in Appendix E.
The terms and conditions which apply to this software are
provided in Appendix F.
zlib
The terms and conditions which apply to
this software are provided in Appendix F.
libusb.so
uClibc
libusb-0.1.12
LGPL 2.1
uClibc-nptl-0.9.29- LGPL 2.1
20070423
Elecktra
Ping6
Ping
BSD-new
BSD-new
BSD-new
BSD-new
tcpdump
tcpdump-4.0.0
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
Tftp
strace
strace 4.5.18
BSD-new
Tracepath6
Tracepath
Traceroot6
BSD-new
BSD-new
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
hdparm
hdparm-6.9
BSD-new
Unzip
Vedit
Vi
BSD-new
BSD-new
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
libpcap
libcap-1.0.0
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
View
Ltdl
BSD-new
LPGL
portmap
portmap
BSD-old
fontconfig
pixman
The terms and conditions which apply to this software are
provided in Appendix J.
qlite
Advertising sentence is:
Copyright (c) 1990 The Regents
of the University of California. All
rights reserved.
malloc-extras
xslt
init
openssl
openssl 0.9.8k
BSD-old. See
advertisement
notice above.
nandtest
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility
License
Utility
agetty
awk
License
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
Utility
nice
License
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
pata_platform.ko
scsi_wait_scan.ko
Badblocks
compile_et
e2fsck
GPL
od
GPL
cat
pivot_root
printenv
printf
pwd
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.1
GPL2.1
GPL2.1
Unique license
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
chgrp
chmod
chown
chroot
cmp
flash_erase
flash_eraseall
flash_info
fsck
readlink
reboot
renice
rmdir
rm
cp
cut
geneccerror
hdparm
date
dd
rmmod
samba
sdiff
hotplog
df
libcom_err
libe2p
diff3
EN
diff
sed
libext2fs
dirname
dmesg
du
seq
libgcc_s
simpleinit
sleep
sort
libnandutils
libproc
echo
egrep
env
nanddump
nandwrite
netstat
stty
swapoff
swapon
sync
expr
ntpdate
false
fgrep
find
top
syslogd
tail
tune2fs
ubiattach
ubicrc32
ubidetach
ubiformat
ubimkvol
ubinfo
free
tar
gawk
grep
tee
touch
tr
gunzip
gzexe
gzip
true
tty
ubinize
head
hexdump
hostname
id
umount
unnamed
uniq
ubirename
ubirmvol
ubiupdatevol
vmstat
unzip
wc
install
kill
libusb-config
libusbpp
libuuid
which
whoami
xargs
yes
klogd
ln
Tip
logger
login
ls
Unzip
zcat
brcm_wifi.hotplug
hostname
libss
zcmp
zdiff
lsmod
lzo
zforce
zgrep
zmore
znew
libstdc++
mk_cmds
mke2fs
md5sum
mkdir
mknod
mkswap
modprobe
more
mount
mv
mklost+found
mount.hotplug
mtdinfo
nandsim.ko
tftpd
ncurses
39
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
Luxi Font Copyright
Luxi fonts copyright (c) 2001 by Bigelow
&
Holmes
Inc. Luxi font instruction code copyright (c) 2001 by
URW++ GmbH. All Rights Reserved. Luxi is a registered
Except as contained in this notice, the name of
a
copyright holder shall not be used in advertising or
otherwise to promote the sale, use or other dealings in
this Software without prior written authorization of the
copyright holder.
trademark of Bigelow
&
Holmes Inc. Permission is
hereby granted, free of charge, to any person obtaining
a copy of these Fonts and associated documentation
files (the “Font Software”), to deal in the Font Software,
including without limitation the rights to use, copy, merge,
publish, distribute, sublicense, and/or sell copies of the
Font Software, and to permit persons to whom the Font
Software is furnished to do so, subject to the following
conditions:
Appendix B - JPEG License
LEGAL ISSUES
============
In plain English:
The above copyright and trademark notices and this
permission notice shall be included in all copies of one or
more of the Font Software.
1. We don’t promise that this software works. (But if you
find any bugs, please let us know!)
2. You can use this software for whatever you want. You
don’t have to pay us.
3. You may not pretend that you wrote this software.
If you use it in a program, you must acknowledge
somewhere in your documentation that you’ve used
the IJG code.
The Font Software may not be modified, altered, or added
to, and in particular the designs of glyphs or characters
in the Fonts may not be modified nor may additional
glyphs or characters be added to the Fonts. This License
becomes null and void when the Fonts or Font Software
have been modified.
In legalese:
The authors make NO WARRANTY or representation,
either express or implied, with respect to this software,
THE FONT SOFTWARE IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER
RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES
INC. OR URW++ GMBH. BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, INCLUDING ANY
GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF THE USE OR INABILITY
TO USE THE FONT SOFTWARE OR FROM OTHER
DEALINGS IN THE FONT SOFTWARE.
its quality, accuracy, merchantability, or fitness for
a
particular purpose.This software is provided “AS IS”, and
you, its user, assume the entire risk as to its quality and
accuracy.
This software is copyright (C) 1991-1998, Thomas G.
Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and
distribute this software (or portions thereof) for any
purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software
is distributed, then this README file must be
included, with this copyright and no-warranty notice
unaltered; and any additions, deletions, or changes
to the original files must be clearly indicated in
accompanying documentation.
Except as contained in this notice, the names of Bigelow
& Holmes Inc. and URW++ GmbH. shall not be used
in advertising or otherwise to promote the sale, use or
other dealings in this Font Software without prior written
authorization from Bigelow & Holmes Inc. and URW++
GmbH.
(2) If only executable code is distributed, then the
accompanying documentation must state that
“this software is based in part on the work of the
Independent JPEG Group”.
For further information, contact:
(3) Permission for use of this software is granted only if
the user accepts full responsibility for any undesirable
consequences; the authors accept NO LIABILITY for
damages of any kind.
Appendix A - CURL license
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@
haxx.se>. All rights reserved.
These conditions apply to any software derived from or
based on the IJG code, not just to the unmodified library.
If you use our work, you ought to acknowledge us.
Permission to use, copy, modify, and distribute this
software for any purpose with or without fee is hereby
granted, provided that the above copyright notice and this
permission notice appear in all copies.
Permission is NOT granted for the use of any IJG author’s
name or company name in advertising or publicity relating
to this software or products derived from it. This software
may be referred to only as “the Independent JPEG
Group’s software”.
THE SOFTWARE IS PROVIDED „AS IS“, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH
We specifically permit and encourage the use of this
software as the basis of commercial products, provided
that all warranty or liability claims are assumed by the
product vendor.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
by a similar licence but with different Copyright notices)
all the files are:
Appendix C - MNG License
/* **********************************************************
COPYRIGHT NOTICE:
Copyright (C) 1998-2003 Daniel Veillard. All Rights
Reserved.
Copyright (c) 2000 Gerard Juyn ([email protected])
Permission is hereby granted, free of charge, to any
person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the
Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do
so, subject to the following conditions:
[You may insert additional notices after this sentence if
you modify this source]
For the purposes of this copyright and license,
“Contributing Authors” is defined as the following set of
individuals:
Gerard Juyn
The MNG Library is supplied “AS IS”. The Contributing
Authors disclaim all warranties, expressed or implied,
including, without limitation, the warranties of
merchantability and of fitness for any purpose. The
Contributing Authors assume no liability for direct, indirect,
incidental, special, exemplary, or consequential damages,
which may result from the use of the MNG Library, even if
advised of the possibility of such damage.
The above copyright notice and this permission notice
shall be included in all copies or substantial portions of
the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
EN
Permission is hereby granted to use, copy, modify, and
distribute this source code, or portions hereof, for any
purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be
misrepresented; you must not claim that you wrote the
original software.
2. Altered versions must be plainly marked as such and
must not be misrepresented as being the original
source.
3. This Copyright notice may not be removed or altered
from any source or altered source distribution.
Except as contained in this notice, the name of Daniel
Veillard shall not be used in advertising or otherwise to
promote the sale, use or other dealings in this Software
without prior written authorization from him.
Appendix F – zlib Distribution Conditions
The Contributing Authors specifically permit, without
fee, and encourage the use of this source code as a
component to supporting the MNG and JNG file format
in commercial products. If you use this source code in a
product, acknowledgment would be highly appreciated.
This software is provided ‘as-is’, without any express or
implied warranty. In no event will the authors be held liable
for any damages arising from the use of this software.
Permission is granted to anyone to use this software for
any purpose, including commercial applications, and to
alter it and redistribute it freely, subject to the following
restrictions:
Parts of this software have been adapted from the libpng
package. Although this library supports all features
from the PNG specification (as MNG descends from it)
it does not require the libpng package. It does require
the zlib library and optionally the IJG jpeg library, and/or
the “little-cms” library by Marti Maria (depending on the
inclusion of support for JNG and Full-Color-Management
respectively.
1. The origin of this software must not be misrepresented;
you must not claim that you wrote the original
software. If you use this software in a product, an
acknowledgment in the product documentation would
be appreciated but is not required.
This library’s function is primarily to read and display MNG
animations.It is not meant as a full-featured image-editing
component! It does however offer creation and editing
functionality at the chunk level. (future modifications may
include some more support for creation and or editing)
2. Altered source versions must be plainly marked as
such, and must not be misrepresented as being the
original software.
3. This notice may not be removed or altered from any
source distribution.
Jean-loup Gailly
Mark Adler
*/
Appendix D - PNG License File Distribution
Clause
If you use the zlib library in
a
product, we would
appreciate *not* receiving lengthy legal documents
to sign. The sources are provided for free but without
warranty of any kind.The library has been entirely written
by Jean-loup Gailly and Mark Adler; it does not include
third-party code.
The Contributing Authors and Group 42, Inc. specifically
permit, without fee, and encourage the use of this source
code as a component to supporting the PNG file format
in commercial products. If you use this source code in a
product, acknowledgment is not required but would be
appreciated.
If you redistribute modified sources, we would appreciate
that you include in the file ChangeLog history information
documenting your changes. Please read the FAQ for
more information on the distribution of modified source
versions.
Appendix E – XML License
Except where otherwise noted in the source code (e.g.
the files hash.c, list.c and the trio files, which are covered
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix G – Freetype License
This license applies to all files distributed in the original
FreeType Project, including all source code, binaries and
documentation, unless otherwise stated in the file in its
original, unmodified form as distributed in the original
archive. If you are unsure whether or not a particular file
is covered by this license, you must contact us to verify
this.
The FreeType Project LICENSE
------------------------------------------
2006-Jan-27
Copyright 1996-2002, 2006 by
David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
=========
The FreeType Project is copyright (C) 1996-2000 by
David Turner, Robert Wilhelm, and Werner Lemberg. All
rights reserved except as specified below.
The FreeType Project is distributed in several archive
packages; some of them may contain, in addition to the
FreeType font engine, various tools and contributions
which rely on, or relate to, the FreeType Project.
1. No Warranty
-------------------
THE FREETYPE PROJECT IS PROVIDED `AS IS’
WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED
BY THE USE OR THE INABILITY TO USE, OF THE
FREETYPE PROJECT.
This license applies to all files found in such packages,
and which do not fall under their own explicit license.
The license affects thus the FreeType font engine, the
test programs, documentation and makefiles, at the very
least.
This license was inspired by the BSD, Artistic, and IJG
(Independent JPEG Group) licenses, which all encourage
inclusion and use of free software in commercial and
freeware products alike. As a consequence, its main
points are that:
2. Redistribution
---------------------
This license grants a worldwide, royalty-free, perpetual
and irrevocable right and license to use, execute,
perform, compile, display, copy, create derivative works
of, distribute and sublicense the FreeType Project (in
both source and object code forms) and derivative
works thereof for any purpose; and to authorize others to
exercise some or all of the rights granted herein, subject
to the following conditions:
o
o
o
We don’t promise that this software works. However,
we will be interested in any kind of bug reports. (`as is’
distribution)
You can use this software for whatever you want, in
parts or full form, without having to pay us. (`royalty-
free’ usage)
You may not pretend that you wrote this software. If
you use it, or only parts of it, in a program, you must
acknowledge somewhere in your documentation that
you have used the FreeType code. (`credits’)
o
Redistribution of source code must retain this license
file (`FTL.TXT’) unaltered; any additions, deletions or
changes to the original files must be clearly indicated in
accompanying documentation. The copyright notices
of the unaltered, original files must be preserved in all
copies of source files.
We specifically permit and encourage the inclusion of
this software, with or without modifications, in commercial
products. We disclaim all warranties covering The
FreeType Project and assume no liability related to The
FreeType Project.
o
Redistribution in binary form must provide a disclaimer
that states that the software is based in part of
the work of the FreeType Team, in the distribution
documentation.We also encourage you to put an URL
to the FreeType web page in your documentation,
though this isn’t mandatory.
Finally, many people asked us for a preferred form for a
credit/disclaimer to use in compliance with this license.
We thus encourage you to use the following text:
“””
Portions of this software are copyright © <year> The
“””
These conditions apply to any software derived from or
based on the FreeType Project, not just the unmodified
files. If you use our work, you must acknowledge us.
However, no fee need be paid to us.
Please replace <year> with the value from the FreeType
version you actually use.
3. Advertising
------------------
Legal Terms
=========
Neither the FreeType authors and contributors nor
you shall use the name of the other for commercial,
advertising, or promotional purposes without specific
prior written permission.
0. Definitions
-----------------
Throughout this license, the terms `package’, `FreeType
Project’, and `FreeType archive’ refer to the set of files
originally distributed by the authors (David Turner, Robert
Wilhelm, and Werner Lemberg) as the `FreeType Project’,
be they named as alpha, beta or final release.
We suggest, but do not require, that you use one or
more of the following phrases to refer to this software in
your documentation or advertising materials: `FreeType
Project’, `FreeType Engine’, `FreeType library’, or
`FreeType Distribution’.
`You’ refers to the licensee, or person using the project,
where `using’ is
the project’s source code as well as linking it to form a
`program’ or `executable’. This program is referred to as
`a program using the FreeType engine’.
As you have not signed this license, you are not
required to accept it. However, as the FreeType Project
is copyrighted material, only this license, or another one
contracted with the authors, grants you the right to use,
distribute, and modify it. Therefore, by using, distributing,
a
generic term including compiling
42
Download from Www.Somanuals.com. All Manuals Search And Download.
or modifying the FreeType Project, you indicate that you
understand and accept all the terms of this license.
the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL
PROJECT ``AS IS’’AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY
4. Contacts
---------------
There are two mailing lists related to FreeType:
AND FITNESS FOR
A
PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE
OpenSSL PROJECT OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Discusses general use and applications of FreeType,
as well as future and wanted additions to the library and
distribution.
If you are looking for support, start in this list if you
haven’t found anything to help you in the documentation.
Discusses bugs, as well as engine internals, design
issues, specific licenses, porting, etc.
org
EN
--- end of FTL.TXT ---
This product includes cryptographic software written by
software written by Tim Hudson ([email protected]).
Appendix H – Openssl License
LICENSE ISSUES
==============
*/
The OpenSSL toolkit stays under a dual license, i.e. both
the conditions of the OpenSSL License and the original
SSLeay license apply to the toolkit.
Original SSLeay License
--------------------------------
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.
com)
See below for the actual license texts. Actually both
licenses are BSD-style Open Source licenses. In case of
any license issues related to OpenSSL, please contact
All rights reserved.
This package is an SSL implementation written by Eric
written so as to conform with Netscapes SSL.
OpenSSL License
------------------------
/* =========================================
This library is free for commercial and non-commercial
use as long as the following conditions are aheared to.
The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code;
not just the SSL code. The SSL documentation included
with this distribution is covered by the same copyright
terms except that the holder is Tim Hudson (tjh@
cryptsoft.com).
Copyright (c) 1998-2008 The OpenSSL Project. All rights
reserved.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
Copyright remains Eric Young’s, and as such any
Copyright notices in the code are not to be removed. If
this package is used in a product, Eric Young should be
given attribution as the author of the parts of the library
used. This can be in the form of a textual message at
program startup or in documentation (online or textual)
provided with the package.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgment: “This product includes software
developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)”
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the
copyright notice, this list of conditions and the following
disclaimer.
4. The names “OpenSSL Toolkit” and “OpenSSL Project”
must not be used to endorse or promote products
derived from this software without prior written
permission. For written permission, please contact
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
5. Products derived from this software may not be called
“OpenSSL” nor may “OpenSSL” appear in their names
without prior written permission * of the OpenSSL
Project.
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgement:
“This
product
includes
6. Redistributions of any form whatsoever must retain
the following acknowledgment: “This product includes
software developed by the OpenSSL Project for use in
cryptographic software written by Eric Young (eay@
cryptsoft.com)”
43
Download from Www.Somanuals.com. All Manuals Search And Download.
The word‘cryptographic’can be left out if the rouines from
the library being used are not cryptographic related :-).
or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the
above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgement: This product includes software
developed by the University of California, Berkeley
and its contributors.
4. Neither the name of the University nor the names of
its contributors may be used to endorse or promote
products derived from this software without specific
prior written permission.
4. If you include any Windows specific code (or
a
derivative thereof) from the apps directory (application
code) you must include an acknowledgement: “This
product includes software written by Tim Hudson
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE REGENTS
AND CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE REGENTS OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
The licence and distribution terms for any publically
available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put
under another distribution licence [including the GNU
Public Licence.]
*/
Appendix I – Expat License
Copyright (c) 1998, 1999, 2000 Thai Open Source
Software Center Ltd and Clark Cooper Copyright (c)
2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
Permission is hereby granted, free of charge, to any
person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the
Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do
so, subject to the following conditions:
Appendix K – GNU GPL 2.0
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA
The above copyright notice and this permission notice
shall be included in all copies or substantial portions of
the Software.
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR
IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
Preamble
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the
GNU General Public License is intended to guarantee
your freedom to share and change free software--to make
sure the software is free for all its users. This General
Public License applies to most of the Free Software
Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software
Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to your
programs, too.
Appendix J – Portmap License
/*-
Copyright (c) 1990 The Regents of the University of
California. All rights reserved.
When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to
distribute copies of free software (and charge for this
Redistribution and use in source and binary forms, with
44
Download from Www.Somanuals.com. All Manuals Search And Download.
service if you wish), that you receive source code or can
get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know
you can do these things.
You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Program
or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that
you also meet all of these conditions:
To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you
to surrender the rights. These restrictions translate to
certain responsibilities for you if you distribute copies of
the software, or if you modify it.
a) You must cause the modified files to carry prominent
notices stating that you changed the files and the date
of any change.
b) You must cause any work that you distribute or publish,
that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole
at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands
interactively when run, you must cause it, when
started running for such interactive use in the most
ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice
that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute
the program under these conditions, and telling the
user how to view a copy of this License. (Exception: if
the Program itself is interactive but does not normally
print such an announcement, your work based on the
Program is not required to print an announcement.)
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients
all the rights that you have.You must make sure that they,
too, receive or can get the source code. And you must
show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the
software, and (2) offer you this license which gives you
legal permission to copy, distribute and/or modify the
software.
EN
Also, for each author’s protection and ours, we want to
make certain that everyone understands that there is no
warranty for this free software. If the software is modified
by someone else and passed on, we want its recipients
to know that what they have is not the original, so that
any problems introduced by others will not reflect on the
original authors’ reputations.
Finally, any free program is threatened constantly by
software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent
must be licensed for everyone’s free use or not licensed
at all.
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not derived
from the Program, and can be reasonably considered
independent and separate works in themselves, then this
License, and its terms, do not apply to those sections
when you distribute them as separate works. But when
you distribute the same sections as part of a whole
which is a work based on the Program, the distribution
of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire
whole, and thus to each and every part regardless of who
wrote it.
The precise terms and conditions for copying, distribution
and modification follow.
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work
which contains a notice placed by the copyright holder
saying it may be distributed under the terms of this
General Public License. The “Program”, below, refers to
any such program or work, and a “work based on the
Program” means either the Program or any derivative
work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with
modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in
the term “modification”.) Each licensee is addressed as
“you”.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution
of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based
on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution
medium does not bring the other work under the scope
of this License.
Activities other than copying, distribution and modification
are not covered by this License;they are outside its scope.
The act of running the Program is not restricted, and the
output from the Program is covered only if its contents
constitute a work based on the Program (independent of
having been made by running the Program).Whether that
is true depends on what the Program does.
3. You may copy and distribute the Program (or a work
based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided
that you also do one of the following:
a) Accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections
1
and
2
1. You may copy and distribute verbatim copies of the
Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice
and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of
this License along with the Program.
above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least
three years, to give any third party, for a charge no
more than your cost of physically performing source
distribution, a complete machine-readable copy of the
corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium
45
Download from Www.Somanuals.com. All Manuals Search And Download.
customarily used for software interchange; or,
c) Accompany it with the information you received as
to the offer to distribute corresponding source code.
(This alternative is allowed only for noncommercial
distribution and only if you received the program in
object code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred form of
the work for making modifications to it. For an executable
work, complete source code means all the source
code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control
compilation and installation of the executable. However,
Ifanyportionofthissectionisheldinvalidorunenforceable
under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software
distribution system, which is implemented by public
license practices. Many people have made generous
contributions to the wide range of software distributed
through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he
or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
as
a
special exception, the source code distributed
need not include anything that is normally distributed (in
either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself
accompanies the executable.
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder
who places the Program under this License may add
an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the
body of this License.
If distribution of executable or object code is made by
offering access to copy from a designated place, then
offering equivalent access to copy the source code from
the same place counts as distribution of the source code,
even though third parties are not compelled to copy the
source along with the object code.
4. You may not copy, modify, sublicense, or distribute the
Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or
distribute the Program is void, and will automatically
terminate your rights under this License. However, parties
who have received copies, or rights, from you under this
License will not have their licenses terminated so long as
such parties remain in full compliance.
9. The Free Software Foundation may publish revised
and/or new versions of the General Public License from
time to time. Such new versions will be similar in spirit to
the present version, but may differ in detail to address
new problems or concerns.
Each version is given a distinguishing version number. If
the Program specifies a version number of this License
which applies to it and “any later version”, you have the
option of following the terms and conditions either of
that version or of any later version published by the Free
Software Foundation. If the Program does not specify
a version number of this License, you may choose any
version ever published by the Free Software Foundation.
5. You are not required to accept this License, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying
or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying,
distributing or modifying the Program or works based
on it.
10. If you wish to incorporate parts of the Program into
other free programs whose distribution conditions are
different, write to the author to ask for permission. For
software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the
sharing and reuse of software generally.
6. Each time you redistribute the Program (or any work
based on the Program), the recipient automatically
receives a license from the original licensor to copy,
distribute or modify the Program subject to these
terms and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights
granted herein. You are not responsible for enforcing
compliance by third parties to this License.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE
OF CHARGE, THERE IS NO WARRANTY FOR
THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
7. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether
by court order, agreement or otherwise) that contradict
the conditions of this License, they do not excuse you
from the conditions of this License.If you cannot distribute
so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all.
For example, if a patent license would not permit royalty-
free redistribution of the Program by all those who receive
copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE,YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
12.INNOEVENTUNLESSREQUIREDBYAPPLICABLE
LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAYMODIFYAND/ORREDISTRIBUTETHEPROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OFTHE USE OR INABILITYTO USETHE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES
object files to the recipients, so that they can relink them
with the library after making changes to the library and
recompiling it. And you must show them these terms so
they know their rights.
We protect your rights with a two-step method: (1) we
copyright the library, and (2) we offer you this license,
which gives you legal permission to copy, distribute and/
or modify the library.
To protect each distributor, we want to make it very clear
that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the
recipients should know that what they have is not the
original version, so that the original author’s reputation
will not be affected by problems that might be introduced
by others.
OR
A
FAILURE OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
Finally, software patents pose a constant threat to the
existence of any free program. We wish to make sure
that a company cannot effectively restrict the users of
a free program by obtaining a restrictive license from a
patent holder. Therefore, we insist that any patent license
obtained for a version of the library must be consistent
with the full freedom of use specified in this license.
EN
Appendix L – GNU LGPL 2.1
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
USA
Most GNU software, including some libraries, is covered
by the ordinary GNU General Public License. This
license, the GNU Lesser General Public License, applies
to certain designated libraries, and is quite different
from the ordinary General Public License. We use this
license for certain libraries in order to permit linking those
libraries into non-free programs.
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It
also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
When
statically or using
of the two is legally speaking
a
program is linked with
shared library, the combination
combined work,
a
library, whether
a
a
a
Preamble
derivative of the original library. The ordinary General
Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser
General Public License permits more lax criteria for
linking other code with the library.
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the
GNU General Public Licenses are intended to guarantee
your freedom to share and change free software--to
make sure the software is free for all its users.
We call this license the “Lesser” General Public License
because it does Less to protect the user’s freedom than
the ordinary General Public License. It also provides
other free software developers Less of an advantage over
competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License
for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
This license, the Lesser General Public License, applies
to some specially designated software packages--
typically libraries--of the Free Software Foundation and
other authors who decide to use it. You can use it too,
but we suggest you first think carefully about whether
this license or the ordinary General Public License is the
better strategy to use in any particular case, based on the
explanations below.
For example, on rare occasions, there may be a special
need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard.To achieve
this, non-free programs must be allowed to use the library.
A more frequent case is that a free library does the same
job as widely used non-free libraries. In this case, there
is little to gain by limiting the free library to free software
only, so we use the Lesser General Public License.
When we speak of free software, we are referring to
freedom of use, not price. Our General Public Licenses
are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this
service if you wish); that you receive source code or can
get it if you want it; that you can change the software and
use pieces of it in new free programs; and that you are
informed that you can do these things.
In other cases, permission to use a particular library in
non-free programs enables a greater number of people
To protect your rights, we need to make restrictions that
forbid distributors to deny you these rights or to ask you
to surrender these rights. These restrictions translate to
certain responsibilities for you if you distribute copies of
the library or if you modify it.
to use
permission to use the GNU
a
large body of free software. For example,
Library in non-free
C
programs enables many more people to use the whole
GNU operating system, as well as its variant, the GNU/
Linux operating system.
For example, if you distribute copies of the library,
whether gratis or for a fee, you must give the recipients
all the rights that we gave you. You must make sure that
they, too, receive or can get the source code. If you link
other code with the library, you must provide complete
Although the Lesser General Public License is Less
protective of the users’ freedom, it does ensure that the
user of a program that is linked with the Library has the
freedom and the wherewithal to run that program using a
47
Download from Www.Somanuals.com. All Manuals Search And Download.
modified version of the Library.
of any change.
The precise terms and conditions for copying, distribution
and modification follow. Pay close attention to the
difference between a “work based on the library” and a
“work that uses the library”. The former contains code
derived from the library, whereas the latter must be
combined with the library in order to run.
c) You must cause the whole of the work to be licensed
at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function
or a table of data to be supplied by an application
program that uses the facility, other than as an
argument passed when the facility is invoked, then
you must make a good faith effort to ensure that, in the
event an application does not supply such function or
table, the facility still operates, and performs whatever
part of its purpose remains meaningful.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0.This License Agreement applies to any software library
or other program which contains a notice placed by the
copyright holder or other authorized party saying it may
be distributed under the terms of this Lesser General
Public License (also called “this License”). Each licensee
is addressed as “you”.
(For example, a function in a library to compute square
roots has
a
purpose that is entirely well-defined
independent of the application. Therefore, Subsection 2d
requires that any application-supplied function or table
used by this function must be optional: if the application
does not supply it, the square root function must still
compute square roots.)
A “library” means a collection of software functions and/
or data prepared so as to be conveniently linked with
application programs (which use some of those functions
and data) to form executables.
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not derived
from the Library, and can be reasonably considered
independent and separate works in themselves, then this
License, and its terms, do not apply to those sections
when you distribute them as separate works. But when
you distribute the same sections as part of a whole which
is a work based on the Library, the distribution of the whole
must be on the terms of this License, whose permissions
for other licensees extend to the entire whole, and thus to
each and every part regardless of who wrote it.
The “Library”, below, refers to any such software library
or work which has been distributed under these terms.
A “work based on the Library” means either the Library
or any derivative work under copyright law: that is
to say, a work containing the Library or a portion of it,
either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter,
translation is included without limitation in the term
“modification”.)
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution
of derivative or collective works based on the Library.
“Source code” for a work means the preferred form of the
work for making modifications to it. For a library, complete
source code means all the source code for all modules
it contains, plus any associated interface definition
files, plus the scripts used to control compilation and
installation of the library.
In addition, mere aggregation of another work not based
on the Library with the Library (or with a work based
on the Library) on a volume of a storage or distribution
medium does not bring the other work under the scope
of this License.
Activities other than copying, distribution and modification
are not covered by this License; they are outside its
scope. The act of running a program using the Library is
not restricted, and output from such a program is covered
only if its contents constitute a work based on the Library
(independent of the use of the Library in a tool for writing
it).Whether that is true depends on what the Library does
and what the program that uses the Library does.
3. You may opt to apply the terms of the ordinary GNU
General Public License instead of this License to a given
copy of the Library. To do this, you must alter all the
notices that refer to this License, so that they refer to the
ordinary GNU General Public License, version 2, instead
of to this License. (If a newer version than version 2 of
the ordinary GNU General Public License has appeared,
then you can specify that version instead if you wish.) Do
not make any other change in these notices.
1. You may copy and distribute verbatim copies of the
Library’s complete source code as you receive it, in
any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence
of any warranty; and distribute a copy of this License
along with the Library.
Once this change is made in a given copy, it is irreversible
for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works
made from that copy.
This option is useful when you wish to copy part of the
code of the Library into a program that is not a library.
You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection
in exchange for a fee.
4. You may copy and distribute the Library (or a portion
or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2
above provided that you accompany it with the complete
corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and
2 above on a medium customarily used for software
interchange.
2. You may modify your copy or copies of the Library or
any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under
the terms of Section 1 above, provided that you also meet
all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent
notices stating that you changed the files and the date
If distribution of object code is made by offering access
48
Download from Www.Somanuals.com. All Manuals Search And Download.
to copy from a designated place, then offering equivalent
access to copy the source code from the same place
satisfies the requirement to distribute the source code,
even though third parties are not compelled to copy the
source along with the object code.
application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking
with the Library. A suitable mechanism is one that (1)
uses at run time a copy of the library already present
on the user’s computer system, rather than copying
library functions into the executable, and (2) will
operate properly with a modified version of the library,
if the user installs one, as long as the modified version
is interface-compatible with the version that the work
was made with.
5. A program that contains no derivative of any portion
of the Library, but is designed to work with the Library by
being compiled or linked with it, is called a “work that uses
the Library”. Such a work, in isolation, is not a derivative
work of the Library, and therefore falls outside the scope
of this License.
c) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no
more than the cost of performing this distribution.
However, linking a “work that uses the Library” with the
Library creates an executable that is a derivative of the
Library (because it contains portions of the Library),
rather than a “work that uses the library”. The executable
is therefore covered by this License. Section 6 states
terms for distribution of such executables.
d) If distribution of the work is made by offering access to
copy from a designated place, offer equivalent access
to copy the above specified materials from the same
place.
EN
When a “work that uses the Library” uses material from
a header file that is part of the Library, the object code
for the work may be a derivative work of the Library even
though the source code is not.
e) Verify that the user has already received a copy of
these materials or that you have already sent this user
a copy.
Whether this is true is especially significant if the work
can be linked without the Library, or if the work is itself
a library. The threshold for this to be true is not precisely
defined by law.
For an executable, the required form of the “work that uses
the Library” must include any data and utility programs
needed for reproducing the executable from it. However,
as a special exception, the materials to be distributed
need not include anything that is normally distributed (in
either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself
accompanies the executable.
If such an object file uses only numerical parameters,
data structure layouts and accessors, and small macros
and small inline functions (ten lines or less in length),
then the use of the object file is unrestricted, regardless
of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library
will still fall under Section 6.)
It may happen that this requirement contradicts the
license restrictions of other proprietary libraries that do
not normally accompany the operating system. Such a
contradiction means you cannot use both them and the
Library together in an executable that you distribute.
Otherwise, if the work is a derivative of the Library, you
may distribute the object code for the work under the
terms of Section 6. Any executables containing that work
also fall under Section 6, whether or not they are linked
directly with the Library itself.
7. You may place library facilities that are a work based
on the Library side-by-side in a single library together
with other library facilities not covered by this License,
and distribute such a combined library, provided that the
separate distribution of the work based on the Library and
of the other library facilities is otherwise permitted, and
provided that you do these two things:
6. As an exception to the Sections above, you may also
combine or link a “work that uses the Library” with the
Library to produce a work containing portions of the
Library, and distribute that work under terms of your
choice, provided that the terms permit modification of the
work for the customer’s own use and reverse engineering
for debugging such modifications.
a) Accompany the combined library with a copy of the
same work based on the Library, uncombined with
any other library facilities. This must be distributed
under the terms of the Sections above.
You must give prominent notice with each copy of the
work that the Library is used in it and that the Library and
its use are covered by this License. You must supply a
copy of this License. If the work during execution displays
copyright notices, you must include the copyright notice
b) Give prominent notice with the combined library of
the fact that part of it is a work based on the Library,
and explaining where to find the accompanying
uncombined form of the same work.
for the Library among them, as well as
a
reference
directing the user to the copy of this License. Also, you
must do one of these things:
8. You may not copy, modify, sublicense, link with, or
distribute the Library except as expressly provided under
this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void,
and will automatically terminate your rights under this
License. However, parties who have received copies,
or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full
compliance.
a) Accompany the work with the complete corresponding
machine-readable source code for the Library
including whatever changes were used in the work
(which must be distributed under Sections 1 and 2
above); and, if the work is an executable linked with
the Library, with the complete machine-readable “work
that uses the Library”, as object code and/or source
code, so that the user can modify the Library and then
relink to produce a modified executable containing
the modified Library. (It is understood that the user
who changes the contents of definitions files in the
Library will not necessarily be able to recompile the
9. You are not required to accept this License, since
you have not signed it. However, nothing else grants
you permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if
49
Download from Www.Somanuals.com. All Manuals Search And Download.
you do not accept this License.Therefore, by modifying or
distributing the Library (or any work based on the Library),
you indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing
or modifying the Library or works based on it.
a license version number, you may choose any version
ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into
other free programs whose distribution conditions are
incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the
free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
10. Each time you redistribute the Library (or any work
based on the Library), the recipient automatically receives
a license from the original licensor to copy, distribute, link
with or modify the Library subject to these terms and
conditions. You may not impose any further restrictions
on the recipients’ exercise of the rights granted herein.
You are not responsible for enforcing compliance by third
parties with this License.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE,THEREISNOWARRANTYFORTHELIBRARY,
TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF
THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY
PROVE DEFECTIVE,YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
11. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether
by court order, agreement or otherwise) that contradict
the conditions of this License, they do not excuse
you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations,
then as a consequence you may not distribute the Library
at all. For example, if a patent license would not permit
royalty-free redistribution of the Library by all those who
receive copies directly or indirectly through you, then the
only way you could satisfy both it and this License would
be to refrain entirely from distribution of the Library.
16.INNOEVENTUNLESSREQUIREDBYAPPLICABLE
LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OFTHE USE OR INABILITYTO USETHE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES
OR A FAILURE OF THE LIBRARY TO OPERATE WITH
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER
OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Ifanyportionofthissectionisheldinvalidorunenforceable
under any particular circumstance, the balance of the
section is intended to apply, and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software
distribution system which is implemented by public
license practices. Many people have made generous
contributions to the wide range of software distributed
through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he
or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
END OF TERMS AND CONDITIONS
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of
the greatest possible use to the public, we recommend
making it free software that everyone can redistribute
and change. You can do so by permitting redistribution
under these terms (or, alternatively, under the terms of
the ordinary General Public License).
12. If the distribution and/or use of the Library is
restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder
who places the Library under this License may add an
explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the
body of this License.
To apply these terms, attach the following notices to the
library.It is safest to attach them to the start of each source
file to most effectively convey the exclusion of warranty;
and each file should have at least the “copyright” line and
a pointer to where the full notice is found.
13. The Free Software Foundation may publish revised
and/or new versions of the Lesser General Public License
from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to
address new problems or concerns.
<one line to give the library’s name and a brief idea
of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/
or modify it under the terms of the GNU Lesser General
Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at
your option) any later version.
Each version is given a distinguishing version number.
If the Library specifies a version number of this License
which applies to it and “any later version”, you have
the option of following the terms and conditions either
of that version or of any later version published by the
Free Software Foundation. If the Library does not specify
This library is distributed in the hope that it will be
50
Download from Www.Somanuals.com. All Manuals Search And Download.
useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Lesser General Public License for more details.
MERCHANTABILITYANDFITNESSFORAPARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
You should have received a copy of the GNU Lesser
General Public License along with this library; if not,
write to the Free Software Foundation, Inc., 59 Temple
Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic
and paper mail.You should also get your employer (if you
work as a programmer) or your school, if any, to sign a
“copyright disclaimer” for the library, if necessary. Here is
a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest
in the library `Frob’(a library for tweaking knobs) written
by James Random Hacker.
b. [THE CODE IS BEING PROVIDED IN OBJECT
CODE SO THE ABOVE DOESN’T APPLY]
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
c. Curl/ 7.12.2
EN
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@
haxx.se>.
Appendix M – BSD-New
All rights reserved.
/*
Permission to use, copy, modify, and distribute this
software for any purpose with or without fee is hereby
granted, provided that the above copyright notice and this
permission notice appear in all copies.
Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993,
1994, 1995, 1996, 1997
The Regents of the University of California. All rights
reserved.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that: (1)
source code distributions retain the above copyright
notice and this paragraph in its entirety, (2) distributions
including binary code include the above copyright notice
and this paragraph in its entirety in the documentation or
other materials provided with the distribution, and (3) all
advertising materials mentioning features or use of this
software display the following acknowledgement:
``This product includes software developed by the
University of California, Lawrence Berkeley Laboratory
and its contributors.’’ Neither the name of the University
nor the names of its contributors may be used to endorse
or promote products derived from this software without
specific prior written permission.
Except as contained in this notice, the name of a copyright
holder shall not be used in advertising or otherwise to
promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
THIS SOFTWARE IS PROVIDED ``AS IS’’ AND
WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
d. C-ARES 1.6.0
Copyright 1998 by the Massachusetts Institute of
Technology.
Permission to use, copy, modify, and distribute this
software and its documentation for any purpose and
without fee is hereby granted, provided that the above
copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in
supporting documentation, and that the name of M.I.T.
not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission. M.I.T. makes no representations about the
suitability of this software for any purpose. It is provided
“as is” without express or implied warranty.
*/
Appendix N – CinemaNow
Third Party Requirements
a. gSOAP.
The following notice is applicable to the CinemaNow
SDK. Company is required to include such notice in the
documentation for any Embedded Products it distributes.
Part of the software embedded in this product is gSOAP
software.
e. Openssl 0.9.5a
Portions created by gSOAP are Copyright (C) 2001-2004
Robert A. van Engelen, Genivia Inc. All Rights Reserved.
Original SSLeay License
----------------------------
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.
com) All rights reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART
PROVIDED BY GENIVIA INC AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
This package is an SSL implementation written by Eric
51
Download from Www.Somanuals.com. All Manuals Search And Download.
written so as to conform with Netscapes SSL.This library
is free for commercial and non-commercial use as long
as the following conditions are adhered to. The following
conditions apply to all code found in this distribution,
be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this
distribution is covered by the same copyright terms except
that the holder is Tim Hudson ([email protected]).
content, content owners may ask Microsoft to revoke the
software’s ability to useWMDRM to play or copy protected
content. Revocation does not affect unprotected content.
When you download licenses for protected content,
you agree that Microsoft may include a revocation list
with the licenses. Content owners may require you to
upgrade WMDRM to access their content. If you decline
an upgrade, you will not be able to access content that
requires the upgrade.
Copyright remains Eric Young’s, and as such any
Copyright notices in the code are not to be removed. If
this package is used in a product, Eric Young should be
given attribution as the author of the parts of the library
used. This can be in the form of a textual message at
program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
1.Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of
thissoftwaremustdisplaythefollowingacknowledgement:
“This product includes cryptographic software written by
can be left out if the rouines from the library being used
are not cryptographic related :-).
4. If you include any Windows specific code (or
a
derivative thereof) from the apps directory (application
code) you must include an acknowledgement: “This
product includes software written by Tim Hudson (tjh@
cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publicly
available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put
under another distribution license [including the GNU
Public License.]
Content owners use Windows Media digital rights
management technology (WMDRM) to protect their
intellectual property, including copyrights. This device
uses WMDRM software to access WMDRM-protected
content. If the WMDRM software fails to protect the
52
Download from Www.Somanuals.com. All Manuals Search And Download.
|