Butler 4570
USER GUIDE
V.1.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
SAFETY INSTRUCTIONS
• Only use the charger plug supplied. Do not use other chargers, as this may damage the
battery cells.
• Only insert rechargeable batteries of the same type. Never use ordinary, non-
rechargeable batteries. Insert rechargeable batteries so they connect to the right poles
(indicated in the battery compartment of the handset).
• Do not touch the charger and plug contacts with sharp or metal objects.
• The operation of some medical devices may be affected.
• The handset may cause an unpleasant buzzing sound in hearing aids.
• Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from
a water source. Keep water away from the handset.
• Do not use the telephone in environments where there is a risk of explosions.
• Dispose of the batteries and maintain the telephone in an environment-friendly manner.
• As this telephone cannot be used in case of a power cut, you should use a mains-
independent telephone for emergency calls, e.g. a mobile phone.
• This telephone uses rechargeable batteries. You have to dispose of the batteries in an
environment friendly manner according to your country regulations.
NiM
CLEANING
Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal house-
hold garbage but bring the product to a collection point for the recycling of electrical and elec-
tronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.
The CE symbol indicates that the unit complies with the essential requirements
of the R&TTE directive.
Topcom Butler 4570
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
1 GETTING STARTED
1.1 INSTALLING THE BASE
For installation, do the following:
• Plug one end of the adaptor into the outlet and the other end into the adapter jack on the
bottom of the telephone.
• Connect one end of the telephone cord with the wall phone jack and the other end to the
bottom of the telephone.
• Put the telephone-and AC power line cord in the base quides as shown on the picture
below:
TEL
Power cable
Telephone cord
1.2 INSTALLING THE HANDSET
• Open the battery compartment (see below).
• Insert the batteries respecting the (+ and -) polarity.
• Close the battery compartment.
• Leave the handset on the base unit for 20 hours. The Line/Charge indicator
the base unit will light up.
(LED) on
Rechargeable
Batteries
back view of hand-set
Cover
Before you use the telephone for the first time, you must first make sure the battery is
charged for 20 hours. If you do not do this, the telephone will not work optimally.
4
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
1.3 IF YOU HAVE PURCHASED A TWIN/TRIPLE VERSION
If you have purchased a Twin or triple verion
• Plug one end of the adaptor into the outlet and the other end into the adapter jack on the
bottom of the charger.
• Insert the battries inside the handset.
• Charge the handset for at least 20 hours.
2 GETTING TO KNOW YOUR TELEPHONE
2.1 KEYS/LED
HANDSET
1 Display
2 Soft Menu key 2
3 On-hook / On-Off key
4 INT key
5 Soft Menu key 1
6 Volume keys
1
7 Off-hook key
8 Alphanumeric keys
2
3
5
9 Flash key
6
BASE
7
10 Paging key
11 In use/Power (LED)
12 Handset on base LED
8
4
10
9
12
11
Topcom Butler 4570
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
2.2 ICONS
Call in progress
New voice mail**
Keypad locked
Alarm set
End Call
Missed calls in call list*
Handset ringer volume OFF
List contains unread or missed calls
not yet consulted
Within base range
New SMS message received***
Handset not registered
or out of range
Battery status:
Empty
Low battery
Medium
Full
*
If the Caller line identification service is available on the telephone line
If the Phonemail service is available on the telephone line
**
*** If the SMS service is available on the telephone line
2.3 BASE LIGHTS
Handset on base
- OFF: No base power connected
- ON: power connected
- Blinking slowly: Off hook
- Blinking rapidly: during registration mode or Phonemail*
* If the Phonemail service is available on the telephone line
6
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
2.4 NAVIGATING THE MENU
The Butler 4570 has a menu system which is easy to use. Each menu leads to a list of
options. The menu map is shown on the following paragraph.
When the handset is switched on and in standby, press the option button under “MENU” to
open the main menu.
Press the
further options or confirm the setting displayed.
or
button to scroll to the menu option you want. Then press OK to select
Exit or go back one level in the menu
To the previous level in the menu, press BACK.
To cancel and return to standby at any time, press
the handset returns to standby automatically.
. If no button is pressed for 60 seconds,
Topcom Butler 4570
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
2.5 MENU OVERVIEW
Menu
Submenu items
Write message
Inbox
SMS
Outbox
Delete messages
Settings
Calls lists
Received calls
Missed calls
Dialled calls
Delete calls List
Handset
Ringtone
Ring Volume
Handset name
Language
Menu Color
Auto Talk
PABX Access code
Base settings
Base ringtone
Base volume
Handset priority
Recall mode
System pin
Time settings
Registration
Alarm
Set date & time
Register handset
Select base
De-register
8
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
3 USING THE TELEPHONE
3.1 SWITCHING THE HANDSET ON/OFF
• Press and hold
• Press again
to switch the handset off.
or place it in the base to switch the handset back on.
3.2 CHANGING THE LANGUAGE
Enter the "Handset" menu in order to change the language:
• Select "Menu" with the left menu key
• Press the navigator key downwards twice.
.
• The "Handset" menu appears on the display. Select "OK".
• Use the navigator key to scroll through the menu and select "Language". The and
arrows indicate that further options are available. To confirm the language press "OK".
The screen displays "English saved" if you have chosen English. Your handset's menus
will be in English.
• To return to the previous menu, select "Back".
3.3 MAKING A CALL
3.3.1 Direct dialling
• Press to obtain a line.
• Dial the number to be called.
• To hang up at the end of the call, press
or put the handset back on the base.
3.3.2 Pre-dialling
With the pre-dialling feature you can enter and modify a number before making the call.
upwards and hold to insert a
• Dial a number of up to 25 digits. Press the navigator key
pause. The screen displays a "P".
• Select "Clear" with the right menu key
screen displays: "Calling 123456789". To hang up at the end of the call, press
to correct. Press to initiate the call. The
or put
the handset back on the base.
3.4 RECEIVING A CALL
When you receive an external call, the screen displays: "External Call".
To take the call:
• Press
or
(if the handset is not on its base/charger)
Lift the handset off its base (if the Auto Talk option is active) (see §“7.5 Auto Answer” ).
• The call in progress
about 15 seconds.
icon appears on the screen. The call duration is displayed after
Topcom Butler 4570
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
3.4.1 Adjusting the ring volume during incoming call
You can adjust the ring volume with the navigator key or
The ring volume is displayed on the screen. There are 5 volume levels as well as the option
while the telephone is ringing.
of turning the ringer off altogether, in which case "Volume Off" is displayed and
appears. This information remains on screen for about 3 seconds, or until the
pressed.
icon
key is
3.5 HANDSFREE MODE
Handsfree lets you talk to your caller without holding the handset. It also enables other
people in the room listen to both sides of your conversation.
Make a handsfree call
• Press
twice. The display shows . Dial the number. Your call can be heard over the
handset’s loudspeaker.
• To switch back to the handset at any time, press
can switch any call to handsfree by pressing
again. Press
during the call.
to end the call. You
3.6 ADJUST EARPIECE/HANDSFREE VOLUME
During a normal or handsfree call, press
or
to select volume 1-5.
3.7 REDIAL A NUMBER FROM THE LIST
You can redial up to 20 of the last numbers called. If you have stored a name in the
phonebook to go with the number, the name will be displayed instead (see § “4 Phonebook” ).
Redial a number from the list:
• Press /P to enter the redial list. Scroll with
displayed.
or
until the number you want is
• Press
to dial the number.
Note: You can also consult the called list by the menu (See § “6 Calls list”)
for more details.
3.8 SECRECY FUNCTION (MUTE FUNCTION)
During conversation you can turn off the microphone so that the person on the other side of
the line will not hear you:
• Select ‘SECRECY’ using the right menu key to deactivate the microphone.
• ‘SECRECY ON’ appears on the display
• Press the right menu key “Off” again to activate the microphone again
10
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
3.9 LOCATING A HANDSET (PAGING FUNCTION)
If you forgot where you left your handset you can press the paging key
handset registered with the base will ring for about 30 seconds.
on the base. All
The
LED on the base will flash. To stop the ringer, press any key on the handset.
3.10 KEYPAD LOCK
You can lock the keypad to prevent accidental dialling while carrying the handset around.
• Press and hold the ‘#’-key until ‘Keypad locked’ and icon appears
• To unlock press left menu key ‘UNLOCK’ and confirm with ‘YES’
4 PHONEBOOK
Each handset can store up to 200 names and numbers. Names can be up to 16 characters
long and numbers up to 20 digits.
To add an entry
• Press right menu key ‘NAMES’.
• If the Phonebook is empty, select ‘Add Entry’ and press ‘OK’
OR
• If names have been stored, they are listed. Press ‘OPTIONS’. ‘Add Entry’ is highlighted.
Press ‘OK’.
• Use the keypad to enter the name, then press ‘OK’.
• Use the keypad to enter the number, then press ‘OK’. The screen shows the phonebook
name list.
• Press and hold ‘Back’ to return to standby.
To Dial an entry
• Press right menu key ‘NAMES’.
• Scroll
name.
• Press
or
to the name you want or use the keypad to enter the first letter of the
to dial the number.
Edit name and number
• Press right menu key ‘NAMES’.
• Scroll
name.
or
to the name you want or use the keypad to enter the first letter of the
• Press ‘OPTIONS. Scroll to ‘Edit Entry’ and press ‘OK’.
• Edit Entry’screen is displayed. Press ‘CLEAR’ to delete or use
cursor. Use the keypad to change the name. Press ‘OK’.
or
to position the
Topcom Butler 4570
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
• Edit the number and press ‘OK’. Display returns to the list of names.
• Press and hold ‘Back’ to return to standby.
View details
• Press NAMES then scroll
• Scroll to Show Details and press OK.
or
to the name you want, the press OPTIONS.
• Displays shows the name, number and any call group or ring tone you may have
assigned to the entry.
• Press and hold Back to return to standby.
Delete an entry
• Press NAMES then scroll
• Scroll to Delete Entry and press OK.
or
to the name you want, then press OPTIONS.
• Press YES to confirm or NO to cancel.
• Press and hold Back to return to standby.
Delete all phonebook entries
• Press NAMES then scroll
• Scroll to Delete All Entries and press OK.
or
to the name you want, then press OPTIONS.
• Press YES to confirm or NO to cancel.
• Press and hold Back to return to standby.
Select ringtone
You can choose which ringer melody is played when you receive a call from selected
numbers in the phonebook.
• Press NAMES then scroll
• Scroll to ‘Ringtone’ and press OK. The Ringtone screen is displayed and the current
setting is highlighted.
• Scroll or to the ringtone you want. A sample is played. Press OK. The display
or
to the name you want, then press OPTIONS.
shows Ringtone Saved then returns to the phonebook list.
• Press and hold Back to return to standby.
5 CALLER IDENTIFICATION
!! This service only works when you have a Caller ID/Clip subscription.
Contact your telephone company !!
When you receive a call, the telephone number of the caller appears on the handset display.
The telephone can receive calls in both FSK and DTMF. You can also see his or her name
if it’s transmitted by the network. If the name is programmed in the Phone Book, the name in
the Phone Book is displayed!
The telephone can store 50 calls in a Call List (received and missed) that can be reviewed
later. When the memory is full, the new calls automatically replace the oldest calls in the
memory. Missed calls are signalled by an icon on the display.
12
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
To read the received calls:
There are 3 ways to show the missed calls:
1) To consult the missed call list when display shows the missed calls amounth during
standby:
• Press Read and scroll to the list with the navigator keys and
The missed calls that you have not consulted are marked with a
.
2) To consult missed calls after activating other telephone functions:
• Press
missed calls).
• Scroll to the list with the navigator keys
and you will immidiatly see the Received call list (combination of received and
or
.
Press to dial a number or select ‘Options’ to delete the entry, see further details or add
the number to the phone book.
3) By the menu (See §“6 Calls list” below)
6 CALLS LIST
Your Butler 4570 keeps a list of all your last calls.
•
•
•
Received Calls: shows details of all recent callers.
Missed Calls: shows details of calls that were not answered.
Dialled Calls: list shows details of the last 20 calls made from your handset.
A combined total of 50 calls can be stored in the Received and Missed calls.
Missed and received calls
You can access the Calls list using the navigator button or the menu.
To use the navigator button:
•
From the standby screen, press
. New calls are indicated with an *. Press
or
to scroll through the list. A beep is played when you reach the first and last calls in the
list.
•
Press to dial a number or OPTIONS to delete the entry, see further details or add the
number to the phonebook.
You can also consult the calls list by the menu.
• Press Menu
• Scroll
OK.
to Calls list and press OK. Select Received calls or Missed calls and press
• If the name of the caller has been stored in the phonebook it is displayed.
Redial list:
Same as described at § “3.7 Redial a number from the list” you can also consult the called
list from the menu.
• Press Menu
• Scroll
to Calls list and press OK. Select Dialled calls and press OK.
Topcom Butler 4570
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
• Press
- Delete: to delete the number.
- Show Details: if a name is displayed, this shows the number.
to dial a number or OPTIONS then select:
- Save Number: to create an entry in the phonebook. Enter the name, press OK. The
number is displayed.
Press OK to store the number.
•
6.1 DELETE CALLS LIST
• Press Menu
• Scroll
• Press
to Calls list and press OK. Select Delete calls lists and press OK.
or to select the list you want to delete:
Received Calls
Missed Calls
Dialled Calls
All Calls
• Press OK
• Press YES to delete or NO to cancel
7 PERSONALISE THE HANDSET
7.1 SETTING THE DATE AND TIME
• Press Menu
• Scroll
to Time settings and press OK. Select Set Date & Time and press OK.
• Enter the date (format: DD/MM).
• Confirm with OK
• Enter the time (format: HH:MM).
• Confirm with OK
7.2 USING THE ALARM FEATURE
Set the date and time and use your Butler 4570 to give you a reminder alarm. You can have
a different alarm setting for each handset registered to your base. The alarm rings only at the
handset, not at the base or any other handset.
7.2.1 Set the alarm
• Press Menu
• Scroll
to Time settings and press OK. Select Alarm and press OK.
• Select On/Off with the navigator and press OK. Using the navigator, choose one of the
3 types of setting: On Once, On Daily or Off. Confirm with OK. If you choose On Once
or On Daily the display will show:
TIME (24 hr):
00:00
Enter the time when you want the telephone to ring and confirm by pressing the OK key.
• To deactivate the Alarm function, select "Off" and confirm with "OK".
14
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
7.2.2 Setting the alarm tone
• Press Menu
• Scroll to Time settings and press OK. Select Alarm and press OK.
• Select Set Alarm Tone with the navigator and press OK.
• Scroll
or
to select the alarm tone (1-4) you want and press OK
7.3 RINGTONE AND VOLUME
7.3.1 Ringtone
You can choose 5 different ringer melodies for internal and external calls.
• From the standby screen, press MENU then scroll
• Press OK to highlight Ringtone. Press OK to select External Calls. Or scroll to Internal
Calls, then press OK.
to Handset and press OK.
• Scroll
and
to select or BACK to return to the previous menu.
to the melody you want. During scrolling a sample is played. Press OK
• Press and hold BACK to return to standby.
7.3.2 Ringer volume
There are five handset ringer volume levels and off. If you select off, calls will still ring at the
base and your handset screen will indicate incoming calls.
• Press MENU then scroll to Handset and press OK.
• Scroll
to Ring Volume and press OK.
• The current setting is displayed. Press
• Press OK to confirm.
• Press and hold BACK to return to standby.
to increase or to
decrease the volume.
7.4 HANDSET NAME
You can change the name displayed on the handset during standby (max. 8 characters long):
• Press MENU then scroll to Handset and press OK.
• Scroll to Handset Name and press OK.
• Enter the handset name you want. Press Clear to make a correction and OK to confirm.
• Press and hold BACK to return to standby.
7.5 AUTO ANSWER
When there is an incoming call and the handset is on the base, the phone automatically takes
the line when lifted. This function can be turned on or off:
• Press MENU then scroll to Handset and press OK.
• Scroll to Auto talk and press OK.
• Select On or Off and press OK to confirm or Back to return.
• Press and hold BACK to return to standby.
Topcom Butler 4570
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
7.6 MENU COLOR
• Press MENU then scroll to Handset and press OK.
• Scroll 1 to Menu Colour and press OK.
• Select Blue, Green or Pink and press Save to confirm or Back to return.
• Press and hold BACK to return to standby.
7.7 PABX ACCESS CODE
It’s possible to use your telephone with a PABX or a local telephone network. When dialling
telephone numbers from the phonebook list, you can add automatically the PABX access
code infront of the phonebook number.
• Press MENU then scroll to Handset and press OK.
• Scroll
• Scroll
to Pabx Access code and press OK.
to “Set code” and press OK.
• Enter the PABX access code, e.g. ‘0’ and press OK.
• Scroll to ON and press OK.
• Press and hold BACK to return to standby.
8 BASE SETTINGS
8.1 RINGTONE AND VOLUME
8.1.1 Ringtone
You can choose 5 different ringer melodies:
• From the standby screen, press MENU then scroll
• Press OK again to enter the Base Ringtone menu.
to Base settings and press OK.
• Scroll
or
to select or BACK to return to the previous menu.
to the melody you want. During scrolling a sample is played. Press OK
• Press and hold BACK to return to standby.
8.1.2 Ringer volume
There are five base ringer volume levels and Off.
• From the standby screen, press MENU then scroll
• Scroll to Base Volume and press OK.
to Base settings and press OK.
• The current setting is displayed. Press
• Press OK to confirm.
• Press and hold BACK to return to standby.
to increase or to decrease the volume.
8.2 HANDSET PRIORITY
Normally, if you have more than one handset registered to your base, they all ring at the
same time. However, you can set one of them to ring before the others, so that calls can
always be answered at one handset first.
•
From the standby screen, press MENU then scroll
to Base settings and press OK.
16
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
• Scroll to Handset Priority and press OK. Display highlights All Handsets. Press OK
to select All Handsets to make all handsets ring together.
Or
• Scroll to Select Handset and press OK. Scroll
first. Press OK.
or
to the handset you want to ring
• Scroll
or
start ringing. Press OK to confirm.
to select the number of rings at the handset before the other handsets
8.3 LINE SETTINGS
8.3.1 Flash time
• Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and
press OK.
• Press
or
time (250ms) and press OK to confirm.
to highlight Recall 1 for short flash time (100ms) or Recall 2 for long flash
8.4 SYSTEM PIN
The System PIN is used for registering and deregistering handsets and some other optional
settings. The default System PIN is 0000.
• Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press
OK.
• Enter the current PIN (Original setting 0000) and press OK.
• Enter the new PIN, press OK and enter it again.
• Press OK to confirm.
9 SMS TEXT MESSAGES
To use SMS, this service has to be activated on your phone line.
Normally you need to call a special number to get a subscription from your
telephone company to activate this function. Please contact your telephone
company for this service.
You can send and receive SMSs with your Butler 4570 telephone. This section tells you how
to use the SMS feature.You can store a total of 50 SMS messages sent and received, each
with up to 160 characters.
9.1 WRITING AND SENDING SMS MESSAGES
• Press MENU then scroll to SMS and press OK.
• Select Write Message and press OK to confirm
Topcom Butler 4570
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
9.1.1 How to write an SMS
For example: when you want to enter the name ‘LUC’
Tap 5 three times to select ‘L’
Tap 8 two times to select ‘U’
Tap 2 three times to select ‘C’
Total keystrokes required = 8
To enter a space press ‘1’
To go quickly to the next letter, either press downwards on the navigator key
the cursor to move on automatically.
, or wait for
For each key, the available characters appears at the top of the screen.
Press
or
to go to the next or previous character
To change to upper case, press INT. To return to lower case press INT again.
You can also insert a symbole by pressing OPTION and select the desired option.
9.1.2 How to send an SMS
• Enter the message to be send
• When finnished select OPTIONS. The following options appears beside above
mentioned options:
- Send To
- Save
- User name
• Select Send To and press OK to confirm.
• Enter the correspondent’s number if you don’t want to use the phonebook memory
OR
Delete the number that appears on the display by pressing Clear and select Search to
search the number in the phonebook. Select the name by using the
• Select Send start sending the SMS. The display will show Sending SMS.
or
keys.
OR
Select Back to modify the message before sending it
OR
Press and hold Clear or Back to delete the message without sending or press
message is totally erased and the phone will return to standby
. The
9.1.3 Save a message
• When finnished writing a message select Options and then Save.
• Confirm with OK. Your message is saved in the OUTBOX list
18
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
9.2 VIEWING THE SAVED AND SENT MESSAGES (OUTBOX)
The OUTBOX contains all the messages you have saved earlier. You can save up to 50 SMS
messages. To read the OUTBOX or sent messages:
• Select Menu with the left menu key, select SMS, then confirm with OK.
• Select Outbox with the navigator, and confirm with OK.
• Select a message with the navigator (the beginning of the message is listed, with the date
and time it was written).
• To read the whole message, select Read.
• When you have opened the message, select Options. You can scroll through the options
with the navigator:
- Edit
- Send to
- Delete
- User Name
• If no message was selected for editing or sending, press Back to return to the SMS menu.
To quit the menu, do a long press on Back with the right menu key.
9.3 VIEWING THE LIST OF RECEIVED MESSAGES (INBOX)
Your Butler 4570 telephone tells you when you have new messages: An icon
is shown on
the screen, with the number of new messages still unread. The SMS LED on the base is lit.
A beep is emitted.
To read new messages as they come in:
•
Select Read with the left menu key. The most recent message is listed first.
To read new messages after using other telephone functions:
•
•
•
Select Menu with the left menu key.
Select SMS, then confirm with OK.
Select Inbox with the navigator and confirm with OK.
To answer, forward, or delete a received message:
•
•
•
Select Options with the left menu key.
Select the action (Reply, Forward or Delete) and confirm with OK.
To quit the Inbox menu, press and hold Back
9.4 USER ACCOUNTS
!! User accounts only works if the network support Sub-addressing !!
With your Butler 4570 telephone you can create up to 4 different "user" accounts. You can
send and receive SMS messages with a user account. Messages received in a user account
are protected by a password. In order to receive SMSs in your personal user account, you
must give your correspondents the user account number that they need to add to your
standard telephonenumber (see § “9.4.2 Receiving SMS messages in a personal user
account” ).
Topcom Butler 4570
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
9.4.1 Creating a user account
•
•
•
•
•
•
Select Menu
Select SMS menu by pressing OK
Select Settings and confirm with OK
Select Users and confirm with OK
Select Add User and confirm with OK. Enter the user name and press OK.
Enter a 4 digit pass word and press OK. Enter the password again to confirm and press
OK.
•
•
You will get automatically a terminal number assigned. To see your terminal number
scroll to Terminal Number and press OK
Select Back to return to previous menu
9.4.2 Receiving SMS messages in a personal user account
To receive SMS messages in your personal user account, you must give your user or
terminal number to your correspondents. To find your user number:
• Select SMS and confirm with OK.
• Select Settings with the navigator, then OK
• Select Users with the navigator, then OK. Your user name appears in the list.
• Select your user name with the navigator and confirm with OK. Enter your password and
confirm with OK.
• Select Terminal Number with the navigator and OK.
Your user number appears on the screen.You correspondents will need to add this user
number to your telephone number when they want to send SMSs to your personal user
account. E.g. If your personal user number is "1" and your telephone number is 123456789,
your correspondents should send their SMS messages to:1234567891! This is the number
you need to remember and give to your correspondents.
9.4.3 Changing an SMS user account number
User numbers are between 1 and 9 but during creating a user account the Butler 4570
assigns user numbers automatically, but you can change the number manually.
• Select Menu with the left menu key.
• Select SMS and confirm with OK
• Select Settings with the navigator and OK.
• Select Users with the navigator and confirm with OK.
• Your user name appears in the list. Select your user name and confirm with OK on the
left menu key.
• Enter your password (if the account is password protected).
• Confirm with OK on the left menu key.
• Select Terminal Number with the navigator and OK. Your user number appears on the
screen. Enter a new number and select OK with the left menu key. If the new number is
already assigned to another user, the handset beeps and the modification fails. If so,
enter another number.
20
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
9.4.4 Reading SMSs in your personal user account
When a new message comes in, your Butler 4570 emits a beep. The screen shows an
envelope, followed by the number of new messages.
• Select Read with the left menu key.
In the SMS list, private messages are flagged with a "p" in front of the name or number.
After selecting a private SMS, the user name appears on the screen.
• Enter the password and confirm with OK. You can now read the SMS.
9.4.5 Sending SMSs from your personal user account
Your Butler 4570 lets you send SMSs from a personal user account. Once you have written
the SMS:
• Select Options and then select User Name with the navigator and confirm with OK on
the left menu key.
• Select the account that you want to send the message from, and confirm with OK.
• Enter your password (if prompted) and confirm with OK.
• Select Send to with navigator and press OK.
• Enter the correspondent's telephone number, or look it up in the phonebook, and select
Send with the left menu key. If you select a “personal user account", the SMS will be sent
using your standard telephonenumber plus the user account number. E.g. If your
personal user number is "1" and your telephone number is 123456789, your
correspondents will receive an SMS from: 1234567891.
Messages sent from a personal user account are stored in the Outbox.
In the outbox the messages are not protected by a password.
9.4.6 Deleting a personal user account
• Select SMS and confirm with OK.
• Select Settings with the navigator and press OK.
• Select Users and confirm with OK.
• Select Delete User with the navigator and press OK. All the personal user accounts
appear on the screen.
• Using the navigator, select the account to be removed and press OK.
• Enter the system PIN (the factory setting is 0000), and select OK. The account is deleted.
All the SMS messages received by the account are deleted; those sent from the account
are still saved in the Outbox.
9.5 ALLOCATING AN SMS TERMINAL NUMBER
It is possible for several SMS-enabled telephones to be connected up to the same line. So
that each telephone can continue to receive SMSs, they must be allocated different SMS
terminal numbers. This is network depending! To allocate a number:
• Select SMS and confirm with OK.
• Select Settings with the navigator and press OK.
Topcom Butler 4570
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
• Select Terminal Number with the navigator and press OK.
• The number "0" is pre-set. To change it: Enter the preferred number (from 0 to 9) and
confirm with OK.
If you have already created personal user accounts, your Butler 4570 will not allow you to
allocate a terminal number that corresponds to an existing user number. If two SMS-enabled
telephones connected up to the same line have the same terminal number, neither will be
able to receive SMSs. They must be given differing numbers. E.g. If you have already created
a user account with the number "3", you must allocate a terminal number other than "3".
If you keep the pre-set terminal number "0" in your Butler 4570 and your telephone number
is 123456789, your correspondents can continue to send you SMSs at 123456789. If you
give the terminal a number other than "0", you must tell your correspondents so that they can
continue to send you SMS messages: they will need to affix the terminal number to your
telephone number. E.g. If you give your Butler 4570 the terminal number "3" and your
telephone number is 12346789, your correspondents will need to send their SMSs to:
13456789 3.
9.6 SET SMS ALERT TONE
Your handset can play a different melody, a morse beep or a discreet tone to announce a
new text message.
• Select Menu and then SMS and confirm with OK.
• Select Settings and press OK.
• Select SMS Alert. and press OK.
• Scroll to Set Alert and press OK.
• Select the type of alert you want and press OK to confirm or BACK to return to the
previous menu.
• Select ON or OFF and press OK to confirm the setting.
9.7 MEMORY FULL
When the memory is full, you get the screen message "Memory Full". You can no longer
send or receive SMSs. To continue to receive SMSs, you can delete some or all of the
messages. To delete all the messages stored in the "Inbox" and "Outbox":
• Select Menu and then SMS and confirm with OK.
• Select Delete Messages and press OK.
• Select All Messages with the navigator and press OK.
• The screen displays: All Messages: Confirm?. Confirm with OK or cancel with Back.
9.8 SMS SERVICE CENTER NUMBERS
To send and receive SMS text messages you need the telephone number of your Network’s
SMS Centre. These numbers have been pre-loaded into the Butler 4570. You can also find
these numbers on the addendum sheet mentioned per country and per operator. If you
accidentally delete the SEND or RECEIVE SMS Service Centre numbers you will need to re-
enter them in order for your SMS Service to work.
The Butler 4570 can store 1 SEND SMS Service center numbers which and 1 RECEIVING
SMS Service center numbers.
22
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
9.8.1 To set the Receiving SMS Centres numbers
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
• Press OK to open Service Centres menu.
• Scroll to Receive Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
• Press OK to store the number.
9.8.2 To set and select the sending SMS Centre number
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
• Press OK to open Service Centres menu.
• Scroll to Sending Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
• Press OK to store the number.
10 ADDITIONAL HANDSETS AND BASES
You can subscribe up to 5 handsets on a Butler 4570 base. Each handset can register to 4
base stations and the user can select which base he wants to use.
10.1 ADDING A NEW HANDSET
!! Only needed when you have deregistered a handset or when you bought a
new one !!
First put the base into registration mode:
• Press and hold the paging button on the base until you hear two beeps.
• The
LED will start to blink on the base for 90 seconds. During that time the base is
ready to register a handset.
On the handset:
• Select Menu to open the menu.
• Select Registration with the navigator and press OK.
• Select Register Handset with the navigator and press OK.
• Select the number of the base to be associated with the handset (1 to 4). Confirm by
pressing OK.
• Enter the system PIN (0000 by default) and confirm with OK. A series of numbers
appears on the screen, representing the base ID. Confirm with 0K. Your handset is
registered.
Topcom Butler 4570
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
10.2 REMOVING A HANDSET
This procedure needs to be carried out on a different handset from the one you want to
uninstall.
• Select Menu by pressing the left menu key.
• Select Registration with the navigator and press OK.
• Select De-register with the navigator and press OK. Enter the system PIN (0000 by
default) and press OK.
• Select the handset to uninstall with the navigator and press OK.
10.3 SELECT A BASE
You can switch your Butler 4570 handset between bases. You can also set it to automatically
base select with the strongest signal. The handset must first be registered with each base
individually.
• Press MENU then scroll to Registration and press OK.
• Scroll to Select Base then press OK. The current base being used is highlighted.
• Select the base you want or select Automatic to connect to the base with the strongest
signal. Press OK.
When you do Automatic base selection, the handset will only search in
standby for the strongest base when it’s out of range on the current base
(not during communication)!
10.4 USING THE INTERCOM FEATURE
10.4.1 Calling an internal handset
• Press INT. The screen displays "Internal Call".
• Enter the internal handset number.
10.4.2 Transfer a external call to another handset
During an external call:
• Press INT.
• Enter the number of the handset you want to call. Your external correspondent is placed
on hold. When the internal correspondent answers, press to transfer the call. If the
internal correspondent doesn't answer, press INT to retrieve the external correspondent
or to go from one to the other.
10.4.3 Conference call
You can talk between 2 handset and a external line at the same time. During an external call:
• Press INT.
• Enter the number of the handset you want to call. Your external correspondent is placed
on hold.
• When the internal correspondent answers, press ‘#’ for 2 seconds. If the internal
correspondent doesn't answer, press INT to retrieve the external correspondent.
24
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
10.4.4 TAKING AN EXTERNAL CALL DURING AN INTERNAL COMMUNICATION
When you are on intercom with another handset, you can still pick up outside calls.
To take an incoming call:
• Press . The internal communication is interrupted.
• Then press .You are in communication with the outside caller.
11 TROUBLESHOOTING
Symptom
Possible cause
Solution
No display
Batteries uncharged
Check the position of the
batteries
Recharge the batteries
Turn ON the handset
Handset turned OFF
No tone
Telephone cord badly con- Check the telephone cord
connection
nected
The line is occupied by
another handset
Wait until the other handset
hangs up
Handset out of range
Bring the handset closer to
the base
The icon flashes
The base has no power
supply
Check the mains connec-
tion to the base
The handset is not regis-
tered on the base
Register the handset on
the base
Base or handset do not ring The ringing volume is zero Adjust the ringing volume
or low
Not possible to transfer a The FLASH time is too
call on PABX short
Set the unit to Long Flash
time
Telephone does not react Manipulation error
to pressing the keys
Remove the batteries and
put them back in place
Topcom Butler 4570
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
12 TECHNICAL DATA
• Standard:
DECT (Digital Enhanced Cordless
Telecommunications)
GAP (Generic Access Profile)
1880 MHZ to 1900 MHz
120 duplex channels
GFSK
• Frequency range:
• Number of channels:
• Modulation:
• Speech coding:
• Emission power:
• Range:
32 kbit/s
10 mW (average power per channel)
300 m in open space /50 m maximum inhouse
Up to 5
• Numbr of handsets:
• Powersupply base
• Handset Batteries:
• Handset autonomy:
• Talk time:
230V / 50 Hz / 35 mA 6,5V DC 180mA & 150mA
2 rechargeable batteries AAA, NiMh 750mAh 1,2V
100 hours in standby
10 hours
6-8 hours
• Charging time:
• Normal conditions of use:
• Flash time
+5 °C to +45 °C
100 or 250 ms
13 DEFAULT SETTINGS
• Handset name:
• Auto talk:
• PABX code
B4570
ON
Empty (Off)
3
• Handset ring volume:
• Ear volume:
• Melody Handset:
• Menu color:
3
Internal calls = 1 and external = 5
Blue
3
• Base ring volume:
• Base ringtone:
• Pin code:
1
0000
• Key lock:
• SMS melody:
Off
On = Morse
26
Topcom Butler 4570
Download from Www.Somanuals.com. All Manuals Search And Download.
Topcom Butler 4570
14 TOPCOM WARRANTY
14.1 WARRANTY PERIOD
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. The warranty on batteries is limited to 6 months after purchase.
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which the
date of purchase and the unit-model are indicated.
14.2 WARRANTY HANDLING
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed
service centre will repair any defects caused by material or manufacturing faults free of
charge.
Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging
the faulty units or parts of the faulty units. In case of replacement, colour and model can be
different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period
is not extended if the unit is exchanged or repaired by Topcom or its appointed service
centres.
14.3 WARRANTY EXCLUSIONS
Damage or defects caused by incorrect treatment or operation and damage resulting from
use of non-original parts or accessories not recommended by Topcom are not covered by
the warranty.
Topcom cordless phones are designed to work with rechargeable batteries only. The
damage caused by the use of non-rechargeable batteries is not covered under warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and
fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been changed, removed or
rendered illegible.
Topcom Butler 4570
27
Download from Www.Somanuals.com. All Manuals Search And Download.
U8006522
Download from Www.Somanuals.com. All Manuals Search And Download.
|