TomTom GPS Receiver 1N00181 User Manual

TomTom ONE

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Getting started

Getting started

Install your TomTom ONE in your car following the instructions on the

installation poster at the start of this book.

To switch on your TomTom ONE, press and hold the On/Off button for 2

seconds. The first time you switch on your device, it may take a short while to

start.

You have to answer a few questions to set up your device.

Having problems?

In rare cases, your ONE may not start correctly or may stop responding to

your taps.

First, check that the battery is charged properly. To fully charge the battery,

you need to charge it for at least 2 hours.

If this doesn’t work, you can reset your device. To do this, press and hold the

Power button for fifteen seconds. Release the Power button when device

begins to restart.

Charging your TomTom ONE

Before you use your ONE for the first time, it’s a good idea to charge it fully

using the home charger, which takes about 2 hours.

There is no charging light on your ONE. To check the battery status and see

when your ONE is charging, switch on your device and tap the bottom right-

hand corner of the screen in the Driving View. The battery status is shown on

the next page.

Improving reception

If your TomTom ONE takes longer than 5 minutes to find your current

position, make sure that the device is in an open space away from tall objects

such as buildings or trees.

When you connect your TomTom ONE to your computer, you can use

TomTom HOME to download information about GPS satellite positions during

the next 7 days. This helps your ONE to find your position faster.

Important: Some vehicles have heat reflective shielding in the windshield.

This may prevent your ONE from locating your current position.

Take care of your TomTom ONE

Never leave your TomTom ONE or accessories in view when you leave the car

or they may become an easy target for thieves.

Download from Www.Somanuals.com. All Manuals Search And Download.

You can set a password for your TomTom ONE which must be entered every

time you start your ONE.

It is important to take care of your ONE.

• Your ONE is not designed for use in extreme temperatures and any such

exposure may cause permanent damage.

• Do not open the casing of your ONE under any circumstances. Doing so

may be dangerous and will invalidate the warranty.

• Wipe or dry the screen of your ONE using a soft cloth. Do not use any liquid

cleaners.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Driving View

Driving View

When your TomTom ONE starts, you are shown the Driving View along with

detailed information about your current location.

Tap the center of the screen at any time to open the Main Menu.

Note: The Driving View is shown in black and white until your ONE locates

your current position.

ATap + and - to zoom in and out.

BYour current position.

CThe name of the next major road or road sign information, if applicable.

DTraffic bar - requires an RDS-TMC Traffic Receiver (available as an

accessory).

ENavigation instruction for the road ahead.

Tap this area to repeat the last spoken instruction and to change the

volume.

FThe name of the street you are on.

GInformation about your trip such as trip time, remaining distance and arrival

time.

To change the information shown, tap Status bar preferences in the

Preferences menu.

HGPS signal strength.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Making your first trip

Making your first trip

Planning a route with your TomTom ONE is easy. To plan your first route,

follow the steps below.

Important: You should always plan your journey before you start driving. It is

dangerous to plan a route while driving.

1. Tap the screen to bring up the main menu.

Note: The buttons on your ONE are shown in full color unless a button is

currently unavailable. For example, the button named Find alternative... in

the Main Menu is not available until you have planned a route.

2. Tap Navigate to...

3. Tap Address.

When you enter an address, you can choose from the following options:

• City center - tap this button to set your destination as the center of a city

or town.

• Street and house number - tap this button to set an exact address as your

destination.

• ZIP code - tap this button to enter a ZIP code as your destination.

Note: You can enter a ZIP code for any country. In the UK and the Netherlands,

ZIP codes are detailed enough to identify a house on their own. In other

Download from Www.Somanuals.com. All Manuals Search And Download.

countries you can enter a ZIP code to identify a town or area. You will then

have to enter a street and house number.

• Cross street or intersection - tap this button to set your destination as the

point where two streets meet.

In this example, we will enter an exact address.

4. Tap Street and house number.

Note: When planning a trip for the first time your ONE asks you to choose a

country. Your choice is saved and used for all routes you plan.

You can change this setting at any time by tapping the country flag.

5. Start to type the name of the town where you want to go.

As you type, the names of the towns that match what you have typed are

shown. When your destination appears in the list, tap the name of the town

to set the destination.

6. Start to type the name of the street and select it when it is shown.

As with the name of the town, the names of the streets that match what you

have typed are shown. When your destination appears in the list, tap the

name of the street to set the destination.

7. Now enter the house number of your destination and then tap Done.

8. Your ONE asks if you need to arrive at a particular time. For this exercise,

tap NO.

Download from Www.Somanuals.com. All Manuals Search And Download.

The route is calculated by your ONE.

9. When the route has been calculated, tap Done.

Your ONE will immediately begin to guide you to your destination, using both

spoken instructions and on-screen directions.

Arrival times

When you plan a route, your TomTom ONE asks you if you need to arrive at a

particular time.

Tap YES to enter a preferred arrival time.

Your ONE calculates your arrival time and shows you whether you will arrive

on time.

You can also use this information to work out when you need to leave. If your

ONE shows that you will arrive 30 minutes early, you can wait and leave in 30

minutes time, rather than arrive early.

Your arrival time is constantly recalculated during your trip. The status bar

shows whether you will arrive on time or if you are going to be late, as shown

below:

You will arrive 55 minutes before the arrival time you entered.

If the estimated arrival time is more than five minutes before

the time you entered, it is shown in green.

You will arrive 3 minutes before the arrival time you entered.

If the estimated arrival time is less than 5 minutes before the

time you entered, it is shown in yellow.

You will arrive 19 minutes late.

If the estimated arrival time is later than the time you entered,

it is shown in red.

Tap Status bar preferences in the Preferences menu, to enable or disable

arrival time notifications.

Select the required options on the first menu screen and then tap Done.

Status bar

preferences

To enable arrival time notifications, select Show leeway to arrival time.

Download from Www.Somanuals.com. All Manuals Search And Download.

What are the other navigation options?

When you tap Navigate to..., you can set your destination in many ways, not

just by entering the address. The other options are listed below:

Tap this button to navigate to your Home location.

You will probably use this button more than any other.

Home

Tap this button to select a Favorite as your destination.

Tap this button to enter an address as your destination.

Favorite

Address

Tap this button to select your destination from a list of places you have

recently used as destinations.

Recent

destination

Tap this button to navigate to a Point of Interest (POI).

Point of

Interest

Tap this button to select a point on the map as your destination using the

map browser.

Point on map

Tap this button to enter a destination using latitude and longitude values.

Tap this button to select your last recorded position, as your destination.

Latitude

Longitude

Position of

last stop

Planning a route in advance

You can also use your ONE to plan trips in advance by selecting both your

starting point and your destination. You could, for example, do the following:

• Find out how long a trip is going to take before you start.

• Check the route of a trip you are planning.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Check a route for someone who is coming to visit you so you can explain

the route to them.

To plan a route in advance, follow these steps:

1. Tap the screen to bring up the main menu.

2. Tap the arrow button to move to the next menu screen and tap Prepare

route.

Prepare route

3. Select the starting point for your trip in the same way that you would select

your destination.

4. Set the destination for your trip.

5. Choose the type of route that should be planned.

• Fastest route - the route which takes the least time.

• Shortest route - the shortest distance between the locations you set. This

may not be the quickest route, especially if the shortest route is through

a town or city.

• Avoid freeways - a route which avoids freeways.

• Walking route - a route designed for making the trip on foot.

• Bicycle route - a route designed for making the trip on a bicycle.

• Limited speed - a route for a vehicle which can only be driven at a limited

speed. You have to specify the maximum speed.

6. Your TomTom ONE plans the route between the two locations you

selected.

More information about a route

You can access these options for the route you last planned by tapping the

Details button on the route summary screen.

You can then select from the following options:

Tap this button for a list of all the turn instructions on the route.

This is very useful if you need to explain a route to someone else.

Browse as

text

Tap this button to see each turn in the trip. Tap the right and left arrows to

move forwards and backwards through the trip.

Tap the screen to turn off the 3D display and view the map from above.

Browse as

images

Tap this button to see an overview of the route using the map browser.

Browse map

of route

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap this button to open the route summary screen.

Show route

summary

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Finding alternative routes

Finding alternative routes

Once you have planned a route, you may want to change something about the

route, without changing your destination.

Why change the route?

Maybe for one of these reasons:

• You can see a roadblock or a line of traffic ahead.

• You want to travel via a particular location, to pick someone up, stop for

lunch or fill up with gas.

• You want to avoid a difficult intersection or a road you don’t like.

Tap Find alternative... in the Main Menu to change the route that is

currently planned.

Then tap one of the options below.

Find alterna-

tive...

Tap this button to calculate an alternative to the route already planned.

Your ONE will look for another route from your current location to your

destination.

Calculate

alternative

If you decide you would prefer to use the original route after all, tap

Recalculate original.

Why would I need to do this?

Apart from the roads near your position and near your destination, the new

route will use totally different roads to reach your destination. This is an

easy way of calculating a totally different route.

Tap this button if you can see a roadblock or a line of traffic ahead. You then

have to choose how much of the route ahead you want to avoid.

Avoid

Choose from the different options: 100m, 500m, 2000m, 5000m. Your ONE

will recalculate your route avoiding the section of the route for the distance

you selected.

roadblock

Don’t forget that once a new route is calculated, you may have to turn off

the road you are on very soon.

If the roadblock suddenly clears, tap Recalculate original to return to your

original route.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap this button to change your route so that it passes a particular location,

perhaps to pick someone up on the way.

You choose the location you want to pass in the same way as you choose a

destination. So you can select from all the same options: for example,

Address, Favorite, Point of Interest and Point on map.

Travel via...

Your ONE will calculate a new route to your destination that passes the

location you chose. Unlike your final destination, your ONE does not inform

you when you pass by this location.

Tap this button to return to the original route without deviations to avoid

roadblocks or traveling via particular locations.

Recalculate

original

Tap this button to avoid a part of the route. Use this button if you see that

your route includes a road or junction you don’t like, or which is well-

known for traffic problems.

Avoid part of

route

You then choose the road you want to avoid from a list of the roads on your

route.

Tap this button to recalculate your route so that it avoids traffic problems as

much as possible. Your ONE will check if there are any traffic problems on

your route and work out the best route to avoid the problems.

Minimize

delays

Note: This button is only available with TomTom Traffic enabled.

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Sounds and voices

Sounds and voices

The sound on your TomTom ONE is used for features such as:

• Spoken instructions

• Warnings

How do I change the volume level?

You can change the volume in three ways:

• Tap the bottom left hand area of the Driving View. The last spoken

instruction is repeated and the volume level is shown.

Move the volume slider to adjust the volume.

• In the Main Menu, tap Change preferences, then tap Volume preferences.

Tap Test to check your changes.

Selecting a voice

To change the voice being used by your TomTom ONE, tap Voice

preferences in the Preferences menu, then tap Change voice. Select a voice

from the list.

Voice

preferences

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Help me!

Help me!

Help me! provides an easy way to navigate to emergency services centers and

other specialist services and contact them by phone.

For example, if you are involved in a car accident, you could use Help me! to

call the nearest hospital and tell them your exact location.

How do I use Help me! to call a local service?

You can use Help me! to find and make contact with a service center.

To use Help me! to locate a service center, contact the center by phone and

navigate from your current location to the center, do the following:

1. Tap the screen to bring up the main menu.

2. Tap Help me!

3. Tap Phone for help.

4. Select the type of service you require, for example, Nearest hospital.

5. To dial, select a center from the list, the nearest is shown at the top of the

list.

Once the call is answered your ONE shows your position on the map along

with a description of the location. This helps you explain where you are

while making a call.

6. To navigate your way to the center on foot, tap Walk there.

Your ONE starts guiding you to your destination.

Download from Www.Somanuals.com. All Manuals Search And Download.

Options

Use your TomTom ONE to find the location of a service and the contact

details.

• Emergency services

• Emergency breakdown services

• Nearest police station

• Nearest doctor

Phone for help

• Nearest hospital

• Nearest public transport

• Nearest car repair services

• Nearest dentist

• Nearest pharmacy

• Nearest vet

Note: In some countries, information may not be available for all services.

Use your TomTom ONE to navigate your way by road to a service center.

• Nearest car repair services

• Nearest hospital

Drive to help

• Nearest doctor

• Nearest police station

• Nearest pharmacy

• Nearest dentist

Note: In some countries, information may not be available for all services.

Use your TomTom ONE to navigate your way on foot to a service center.

• Nearest gas station

• Nearest public transport

• Nearest police station

• Nearest pharmacy

• Home

Walk to help

• Nearest doctor

Note: In some countries, information may not be available for all services.

Your TomTom ONE shows your current location.

You can then tap Phone for help to select the type of service you want to

contact.

Where am I?

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap this button to read the British Red Cross First Aid guide.

Tap this button to read a selection of useful guides.

First Aid

Guide

Other guides

Download from Www.Somanuals.com. All Manuals Search And Download.

8. Favorites

Favorites

What are Favorites?

Favorites are places that you often visit. You can create Favorites so that you

don’t have to enter the address every time you want to navigate there.

They don’t have to be places you especially like, just useful addresses.

How can I create a Favorite?

From the Main Menu, tap Add Favorite.

Note: The button Add Favorite may not be shown on the first page of the Main

Menu. Tap the arrow to open other pages in the Main Menu.

You can then select the location of the Favorite from the list below.

Give your Favorite a name that is easy to remember. Your ONE will always

suggest a name, usually the address of the Favorite. To enter the name, just

start typing. You don’t have to delete the suggested name.

You can set your Home location as a Favorite.

Home

You cannot create a Favorite from another Favorite. This option will always

be unavailable in this menu.

To rename a Favorite, tap Manage Favorites in the Preferences menu.

Favorite

You can specify an address to be a Favorite. When you enter an address,

you can choose from four options.

• City center

Address

• Street and house number

• ZIP code

• Crossing or intersection

Download from Www.Somanuals.com. All Manuals Search And Download.

Select a Favorite location from a list of places you have recently used as

destinations.

Recent

destination

You can add a Point of Interest (POI) as a Favorite.

Does it make sense to do this?

If you visit a POI you particularly like, for example a restaurant, you can add

it as a Favorite.

Point of

Interest

To add a POI as a Favorite, tap this button, then do the following:

1. Narrow your choice of POIs by selecting the area where the POI is.

You can select one of these options:

• POI near you - to search from a list of POIs near your current position.

• POI in city - to choose a POI in a particular town or city. You have to

specify a town or city.

• POI near Home - to search from a list of POIs near your Home

location.

If you are currently navigating to a destination, you can also select from

a list of POIs which are on your route or near your destination. Choose

one of these options:

• POI along route

• POI near destination

2. Select the category of POI.

Tap the category of POI if it is shown or tap the arrow to choose from

the complete list.

Tap Any POI category to search for a POI by name.

Tap this button to add your current position as a Favorite.

For example, if you stop somewhere interesting, while you are there you

can tap this button to create the Favorite.

My location

Tap this button to create a Favorite using the map browser.

Select the location of the Favorite using the cursor, then tap Done.

Point on map

Tap this button to create a Favorite by entering latitude and longitude

values.

Latitude

Longitude

Tap this button to select your last recorded position as your destination.

Position of

last stop

Download from Www.Somanuals.com. All Manuals Search And Download.

How can I use a Favorite?

You will normally use a Favorite as a way of navigating to a place without

having to enter the address. To navigate to a Favorite, do the following:

1. Tap the screen to bring up the main menu.

2. Tap Navigate to...

3. Tap Favorite.

4. Select a Favorite from the list.

Your ONE calculates the route for you.

5. When the route is calculated, tap Done.

Your ONE will immediately start guiding you to your destination with spoken

instructions and visual instructions on the screen.

How can I change the name of a Favorite?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences to open the Preferences menu.

3. Tap Manage Favorites.

4. Tap the Favorite you want to rename.

5. Tap Rename.

How can I delete a Favorite?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences to open the Preferences menu.

3. Tap Manage Favorites.

4. Tap the Favorite you want to delete.

5. Tap Delete.

Download from Www.Somanuals.com. All Manuals Search And Download.

9. Browse map

Browse map

To look at the map in the same way as you might look at a traditional paper

map, tap Browse map in the Main Menu.

You can move the map by touching the screen and moving your finger across

the screen.

AThe scale bar

BYour current position.

CGPS button

Tap this button to center the map on your current position.

DOptions

EThe cursor

FThe Find button

Tap this button to find specific addresses.

GThe Cursor button

Tap this button to navigate to the cursor position, make a Favorite of the

cursor position, or find a Point of Interest near the cursor position.

HThe zoom bar

Zoom in and out by moving the slider.

Cursor button

You can use the cursor to find addresses and Points of Interest (POIs), for

example, restaurants, train stations and gas stations.

Download from Www.Somanuals.com. All Manuals Search And Download.

Position the cursor over a location on the map, then tap one of the following

buttons:

Tap this button to navigate to the cursor position. Your ONE will calculate

the route.

Navigate

there

Tap this button to find a POI near the cursor position. For example, if you

have found a restaurant to go to, you can search for a parking garage

nearby.

Find POI

nearby

Tap this button to bring the location currently highlighted by the cursor to

the center of the screen when looking at the map.

Center on

map

Tap this button to create a Favorite at the cursor position.

Add as

Favorite

Tap this button to correct the location shown at the cursor position.

Correct

location

Download from Www.Somanuals.com. All Manuals Search And Download.

10. Points of Interest

Points of Interest

Points of Interest or POIs are useful places on the map. Here are some

examples:

• Restaurants

• Hotels

• Museums

• Parking garages

• Gas stations

Navigating to a POI

You can use a POI as your destination. For example, if you are traveling to an

unfamiliar city, you could choose a POI to help find a parking garage.

1. Tap the screen to bring up the main menu.

2. Tap Navigate to... in the Main Menu.

3. Tap Point of Interest.

4. Tap POI in city.

5. Narrow your choice of POIs by selecting the area where the POI is located.

You can select one of these options:

• POI near you - to choose from a list of POIs near to your current location.

• POI in city - to find a POI in a particular town or city.

• POI near Home - to choose from a list of POIs near to your Home location.

You can select from a list of POIs which are along your route or close to your

destination. Choose from one of these options:

• POI along route

• POI near destination

Note: The last POI you viewed is also shown so that you can plan a route there

more quickly.

6. Type the name of the town you want to visit and select the town when it

appears in the list.

7. Select the category of POI:

Tap Any POI category to search for a POI by category name.

Tap the category of POI, if it is shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap the arrow to choose from the complete list of categories. Select the

category from the list or start to type the name of the category and select it

when it appears in the list.

8. Tap Parking garage.

9. From the list of POIs shown, select the POI you want to navigate to.

The table below explains the distances listed next to each POI.

POI near you

POI in city

Distance from your current location

Distance from the city center

POI near Home

Distance from your Home location

Distance from your current location

POI along

route

POI near

destination

Distance from your destination

If you know the name of the POI, tap Find and type the name. Select it from

the list when it is shown.

The next screen shows more detailed information including the location of

the POI on the map and the phone number of the POI, if available.

Tap Select to confirm you want to plan a route to this POI.

Once you have selected a POI, the route to the POI is calculated by your

TomTom ONE.

Showing POIs on the map

1. Tap Show POIs on map in the Preferences menu.

Show POI on

map

2. Select the POI categories to display on the map.

Tap Find to search for a POI by name.

3. Tap Done.

The POIs you have selected are shown as symbols on the map.

How can I set warnings for POIs?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences.

3. Tap Warn when near POI.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap this button to receive a warning when you travel near to the location

of a POI.

Warn when

near POI

4. Select the category of POI you want to be warned about.

Select the category from the list or start to type the name of the category

and select it when it is shown in the list.

5. Set how close the POI should be when you receive a warning.

6. Choose the warning sound for the category of POI you selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

11. Preferences

Preferences

Use night colors / Use day colors

Tap this button to reduce the brightness of the screen and show darker

colors on the map.

When should I use this?

Use night

colors

When it’s dark, it is easier to see the screen if the display on your ONE is not

brightly lit.

To change back to a brighter screen showing brighter colors on the map,

tap Use day colors.

Use day colors

Show POI on map

Tap this button to set which categories for the Points of Interest (POIs)

should be shown on the map:

1. Tap Show POIs on map in the Preferences menu.

2. Select the POI categories to display on the map.

Show POI on

map

Tap Find to search for a POI category.

3. Tap Done.

The POIs you have selected are shown as symbols on the map.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety preferences

Tap this button to set the following safety preferences:

• Hide most menu options while driving

• Suggest driving breaks

Safety

preferences

• Show safety reminders

• Warn when near places of worship or schools

• Warn when driving faster than allowed

• Warn when driving faster than a set speed

• Warn not to leave the device in the car

If you select one or more of the warnings, you will also be asked to select a

sound to be played whenever a warning is displayed.

Select whether or not your TomTom ONE should warn you about which

side of the road you should be driving on.

Decide if you want the map display to be turned off in special

circumstances and press Done.

What happens when I use the Turn off map display option?

When you turn off the map display, instead of seeing your position on a map

in the Driving View, you will only see information about the next instruction.

Tap the button and select an option for when the map should be turned off.

These are the options:

• Always - The map will not be shown and you will only see information

about the next instruction and arrows showing direction.

• Above a certain speed - you set the speed at which point the map will be

turned off. This option is useful for situations when the map might be

distracting, such as when you are driving fast.

• Never - the map is never turned off.

Guided tours

Tap this button to show one of the Guided tours on how to use your

TomTom ONE.

Guided tours

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn off sound / Turn on sound

Tap this button to turn off sound. If you turn off the sound, warnings for

upcoming POIs are also turned off.

The button changes to Turn on sound.

Turn off sound

Tips

To change the volume, tap Volume preferences in the Preferences menu.

To change the volume quickly while you are driving, tap the bottom left-

hand section of the Driving View and move the slider.

To change the voice being used by your ONE, tap Change voice in the

Voice preferences menu.

Volume preferences

Tap this button to change the volume.

Volume

preferences

Manage Favorites

Tap this button to rename or delete Favorites.

To find a Favorite quickly, tap Find, then start to type the name of the

Favorite. As soon as the Favorite is shown in the list, you can select it.

Manage

Favorites

Download from Www.Somanuals.com. All Manuals Search And Download.

Status bar preferences

Tap this button to select the information shown on the status bar:

• Remaining time - the estimated time left until you reach your destination.

• Remaining distance - the distance left until you reach your destination.

• Current time

Status bar

preferences

• Arrival time - your estimated arrival time.

• Speed

• Direction

• Show next street name - the name of the next street on your trip.

• Show current street name

• Show leeway to arrival time - your ONE shows how late or early you will

be compared with the preferred arrival time that is set during the

planning of a route.

• Show max speed next to speed - only available when speed (above) is

also selected.

• How should the status bar be displayed?

Horizontal - If you choose this option, the status bar will be shown at the

bottom of the Driving view.

Vertical - If you choose this option, the status bar will be shown at the

right-hand side of the Driving view.

Note: If the speed limit for the road you are on is available, it is shown next

to your speed.

If you drive faster than the speed limit, your speed is shown in red.

Change voice

Tap this button to change the voice that is used for announcing command

directions.

Change voice

Warn when near POI

Tap this button to announce a warning when your are approaching a Point

of Interest.

Warn when

near POI

Download from Www.Somanuals.com. All Manuals Search And Download.

Change 2D/3D display / Turn on 2D display

Tap Turn on 2D display to change the perspective for viewing the map.

For example, the 2D view shows a two dimensional view of the map as

though viewed from above.

Turn on 2D

display

To switch the view to a three dimensional perspective, tap Change 2D/3D

display and select a view from the list.

Change2D/3D

display

When should I use this?

In some situations, it is easier to see the map from above. Perhaps if the road

network is complicated or for times when you are walking while using your

ONE to navigate.

Name preferences

Tap this button to set the information that is shown on the map in the

Driving View. The following options are available:

• Show house number before street name

Name

• Show street names - if you are using a computer voice for spoken

instructions and have selected that street names should be read aloud,

you do not need to select this option, since the street names will be read

aloud even though this option is not selected.

preferences

• Show next highway / signpost - when this option is selected, the next

major road on your route is shown at the top of the screen in the Driving

View.

• Show current street name on map

Change Home location

Tap this button to set or change your Home location.

Change Home

location

Do I need to use my actual home address for the Home location?

No. Your Home location can be a place you go often, for example, your office.

It can be your actual home address, but it can also be any address you like.

Why should I set a Home location?

Having a Home location means that you have a quick and easy way to navigate

there, by tapping the Home button in the Navigate to... menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Manage maps

Tap this button to do the following:

• Download a map - tap this button to download a map you have bought

using TomTom HOME. It may not be possible to download maps on all

devices.

Manage maps

• Switch map - tap this button to change the map you are using.

• Download free map corrections - tap this button to download map

corrections provided as part of the Map Share service.

• Delete a map - tap this button to delete a map. This might be necessary

to create more space on your ONE, for example when you want to load

a different map.

Note: Don’t delete a map unless you have already made a backup of the

map. If you delete a map before you make a backup, you will no longer be

able to load the map on your ONE.

Use TomTom HOME to make backups, download, add and delete maps

from your navigation device.

Planning preferences

Tap this button to set the kind of route planned when you select a

destination.

The following options are available:

• Ask me every time I plan

• Always plan fastest routes

• Always plan shortest routes

• Always avoid freeways

Planning

preferences

• Always plan walking routes

• Always plan bicycle routes

• Always plan for limited speed

You can then set if the route summary screen closes automatically after you

have planned a route. If you select No, you have to tap Done to close the

route summary screen.

Change language

Tap this button to change the language used for all the buttons and

messages you see on your ONE.

You can choose from a wide range of languages. When you change the

language, you are also given the opportunity to change the voice.

Change

language

Download from Www.Somanuals.com. All Manuals Search And Download.

Set owner

Tap this button to enter your name and address as the owner of your ONE

and to change or delete a 4-digit password for your ONE.

Note: You can only change or delete a 4-digit password on your

TomTom ONE.

Set owner

You can create a 4-digit password for your ONE using TomTom HOME:

1. Connect your ONE to your computer and turn on your ONE and your

computer.

TomTom HOME starts automatically.

2. Click on Operate my ONE in TomTom HOME.

Your ONE appears and can be controlled using TomTom HOME.

3. From the Main Menu, click Change preferences.

4. Click Set Owner. You can now set a 4-digit password for your ONE.

You can only create a 4-digit password using TomTom HOME.

Operate left-handed / Operate right-handed

Tap this button to move important buttons, for example, the Done and

Cancel buttons as well as the zoom bar, to the left hand side of the screen.

This makes it easier to tap the buttons with your left hand without blocking

the screen.

Operate left-

handed

To move the buttons back to the right hand side of the screen, tap Operate

right-handed.

Brightness preferences

Tap this button to set the brightness of the screen.

Move the sliders to set the brightness separately for day map colors and for

night map colors.

Brightness

preferences

You can set the map color scheme by tapping Change map colours.

Change map colors

Tap this button to select the color schemes for day and night map colors.

You can also download more color schemes from TomTom Services.

Change map

colors

Download from Www.Somanuals.com. All Manuals Search And Download.

Set units

Tap this button to set the type of units that will be shown for the following:

• Distance

• Time

Set units

• Latitude and longitude

• Temperature

• Air pressure

Set clock

Tap this button to select the type of clock that is shown and set the time.

The easiest way to set the time is by tapping the Sync button. Your ONE will

then take the time from GPS information.

Set clock

Note: After using Sync to set the time, you may have to adjust the hours

depending on your time zone. Your ONE works out your time zone and

always keeps the time correct using GPS information.

You can only use Sync if you have GPS reception, so you cannot set the

clock in this way when you are indoors.

Keyboard preferences

You use the keyboard to enter your destination or to find an item in a list,

such as a POI.

Tap this button to select the size of the keys on the keyboard and the

keyboard layout. You can select from two sizes:

Keyboard

preferences

• Large keyboard

• Small keyboard

Three keyboard layouts are available:

• ABCD keyboard

• QWERTY keyboard

• AZERTY keyboard

Download from Www.Somanuals.com. All Manuals Search And Download.

Compass preferences

Tap this button to configure the compass. The following options are

available:

• None - the compass is not shown.

Compass

• One with arrow pointing north - the arrow always points towards north

preferences

and the direction you are moving is shown at the top of the compass.

• One with arrow showing your heading - the arrow always shows the

direction you are moving.

If you select one of these options, you then need to select the features

that are shown in the middle of the arrow:

• Direction - your direction is shown as a compass point, displayed in

the center of the compass arrow.

• Degrees - your direction is shown as compass degrees, displayed in

the center of the compass arrow.

• Nothing

• One with arrow pointing to your destination - the arrow always points

towards your destination. The distance to your destination is displayed

in the compass arrow.

Reset factory settings

Tap this button to restore the factory settings to your TomTom ONE.

All your settings, including Favorites, your Home location, warnings for

POIs and any Itineraries you have created are deleted.

Reset factory

settings

Download from Www.Somanuals.com. All Manuals Search And Download.

12. TomTom Map Share

TomTom Map Share

TomTom Map Share is a free service that lets you make updates to your

map and if you want to, share those updates with other members of the

TomTom Map Share community.

If you find a street that has recently been blocked to traffic but was open

before, you can use Map Share to update your map and then share the update

with other Map Share members.

You can use Map Share to send and receive map updates during the first year

after the map’s release date. This means that one year after the release date,

you will no longer be able to send or receive map updates for that version of

the map - You will still be able to make updates to your own map for use on

your own device.

When you join the TomTom Map Share community you can keep your maps

up-to-date with the latest updates made by other Map Share community

members.

You choose the type of updates you want and each time you connect your

TomTom ONE to TomTom HOME, the map is automatically updated.

Map updates

There are two types of map update:

• Updates that are immediately shown on the map. These include, changing

the traffic flow of a street, blocking or renaming a street and adding or

editing POIs.

This type of change is immediately shown on your own map. You can hide

these updates at any time in the Map Share preferences menu.

• Updates that are reported to TomTom but not shown immediately on your

map. These include, missing streets, errors in freeway entrances and exits

and missing roundabouts.

This type of update is investigated by TomTom and once verified, is included

in the next map release. These updates are therefore not shared with the Map

Share community.

Download from Www.Somanuals.com. All Manuals Search And Download.

Making a map update

1. Tap Map corrections in the Main Menu.

2. Tap Correct a map error.

Correct a map

error

A list of possible map updates is shown.

3. Select the type of update you want to report.

Note: If you tap Add missing POI or Report other error you will be asked for

some additional information before the next step.

4. Select the method you want to use for selecting the location of the

update.

5. When you have found the location, tap Done.

6. Enter update or confirmation of update now.

Receiving the latest map updates

When you connect your TomTom ONE to your computer, TomTom HOME

automatically downloads any available map updates and sends any changes

you have made, to the Map Share community.

There are several types of updates which can be set in the Correction

preferences menu.

Marking a map error while on the move

If you notice an item on your map that needs attention, you can mark the

location using the Report button and then enter the details when you are no

longer driving.

To show the Report button in the Driving View, do the following:

1. Tap Map corrections in the Main Menu.

2. Tap Correction preferences.

3. Tap Done and then tap Done again.

4. Select Show report button, then tap Done.

The Report button is shown on the left-hand side of the Driving View. After

you mark a location, you can add more information about the change when

you open the Map corrections menu.

For example, you are driving to a friend's house and you notice that the name

of the street you are on is different from the one on your map. To report the

change, tap the Report button and your ONE will save your current location.

You can then send the update to TomTom Map Share when you have finished

your trip.

TomTom Map Share community

To join the Map Share community, do the following:

1. Tap Map corrections in the Main Menu.

2. Tap Download corrections made by others.

3. Tap Join.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you connect your TomTom ONE to computer, TomTom HOME

automatically downloads any available map updates and sends any changes

you have made, to the Map Share community.

Changing my preferences for map updates

Correction preferences is used to set the way TomTom Map Share runs on

your device.

You can set the following preferences:

• Choose what types of updates you want to use on your maps.

• Decide if you want to share your updates with others.

• Show or hide the Report button in the Driving View.

To set your preferences, do the following:

1. Tap Map corrections in the Main Menu.

2. Tap Correction preferences.

A list of update types is shown.

3. Tick the box next to each update type you want use.

4. Tap Done.

5. Choose how you want to share your map updates with the Map Share

community, then tap Done.

6. Choose if you want to see the Report button in the Driving View.

7. Tap Done.

Tip: If you later decide you want to remove updates from the map, clear the

checkbox next to the types of update you want to remove. If you clear all the

checkboxes, your map returns to the original state before the first update.

Map update categories

There are several types of update that you can make to a map.

Download from Www.Somanuals.com. All Manuals Search And Download.

To make an update to your map, tap Map corrections in the Main Menu then

tap Correct a map error. The following types of updates are shown.

Tap this button to block or unblock a street. You can block or unblock the

street in one or both directions.

For example, to correct a street near to your current location, do the

following:

(Un)block

street

1. Tap (Un)block street.

2. Tap Near you to select a street near your current location. You can select

a street by name, a street near your Home location or a street on the

map.

3. Select the street or section of a street you want to correct by tapping it

on the map.

The street you select is highlighted and the cursor shows the name of

the street.

4. Tap Done.

Your device shows the street and whether the traffic is blocked or

allowed in each direction:

5. Tap one of the direction buttons to block or unblock the flow of traffic in

that direction.

6. Tap Done.

The next time you connect your device to TomTom HOME, your updates

are shared with the TomTom Map Share community.

Tap this button to correct the traffic direction of a one-way street, where the

direction of traffic is different to the direction shown on your map.

Note: Reverse traffic direction only works for one-way streets. If you select

a two-way street you will be given the chance to block/unblock the street

rather than changing the direction.

Reversetraffic

direction

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap this button to change the name of a street on your map.

For example, to rename a street near to your current location:

1. Tap Edit street name.

Edit street

name

2. Tap Near you.

3. Select the street or section of a street you want to correct by tapping it

on the map.

The street you select is highlighted and the cursor shows the name of

the street.

4. Tap Done.

5. Type the correct street name.

6. Tap Done.

Tap this button to change and report incorrect road turn directions.

Tap this button to change and report road speed limit.

Tap this button to add a new Point of Interest (POI).

Change turn

restrictions

Change road

speed

For example to add a new restaurant near to your current location:

1. Tap Add missing POI.

Add missing

POI

2. Tap Restaurant in the list of POI categories.

3. Tap Near you.

4. Select the location of the missing restaurant.

You can select the location by entering the address or by selecting the

location on the map. Select Near you or Near home to open the map at

your current location or at your Home location.

5. Tap Done.

6. Type the name of the restaurant then tap OK.

7. If you know the telephone number of the restaurant you can type it, then

tap OK.

If you don’t know the number, just tap OK without typing a number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tap this button to edit an existing POI.

You can use this button to make the following changes to a POI:

• Delete the POI.

Edit POI

• Rename the POI.

• Change the telephone number of the POI.

• Change the category that a POI belongs to.

• Move the POI on the map.

Tap this button to report other types of update.

These updates are not immediately corrected on your map. Your

TomTom ONE sends a special update report to TomTom Map Share.

Report other

error

You can report missing streets, errors in freeway entrances and exits and

missing roundabouts. If the update you want to report is not covered by

any of these report types, enter a general description then tap Other.

Download from Www.Somanuals.com. All Manuals Search And Download.

13. Traffic Information using RDS-TMC

Traffic Information using RDS-TMC

The Traffic Message Channel (TMC)

You can receive traffic information on your TomTom ONE using the TomTom

RDS-TMC Traffic Receiver. The TMC transmits traffic information as a radio

signal.

Tip: The TomTom RDS-TMC Traffic Receiver is included with some products

and available as an accessory for others. Visit tomtom.com for more

information.

The Traffic Message Channel (TMC) is not a TomTom Service. FM radio

stations in several countries broadcast TMC information as part of their

programming. TMC is also known as RDS-TMC traffic information.

Your TomTom navigation device uses this information to warn you about

traffic delays along your route and how you can avoid them.

Note: TomTom is not responsible for the availability or quality of traffic

information provided by TMC.

TMC is not available in all countries or regions. Visit tomtom.com to check if

it is available in your country or region.

Setting up TMC

To start using TMC all you need to do is connect the RDS-TMC Traffic Receiver

to your TomTom navigation device.

Important: When you install your navigation device in your car, don’t block

the driver’s view of the road.

1. Connect the RDS-TMC Traffic Receiver to your navigation device.

2. Connect the Car Charger to the RDS-TMC Traffic Receiver and then plug the

Car Charger into your car’s cigarette lighter socket.

Note: The RDS-TMC receiver does not work if the Car Charger is not

connected.

3. Place the transparent suction cup at the tip of the antenna firmly against the

upper left hand corner of your car windshield.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Then place the remaining suction cups along the edge of the windshield, as

shown, keeping the cable straight.

5. Switch on your navigation device.

The Traffic bar is shown in the Driving View and your navigation device

searches for a radio station that carries RDS-TMC information.

These symbols are shown at the top of the traffic sidebar:

Your ONE has the latest RDS-TMC traffic information.

Your ONE is waiting to download the latest RDS-TMC traffic

information as soon as it is available.

Your ONE is searching for a radio station that carries RDS-TMC

traffic information.

Using RDS-TMC traffic information

As soon as you start receiving traffic information, the traffic sidebar is

shown on the right side of the Driving View. The traffic sidebar warns you

about any traffic incidents on your route.

In this example, there is a traffic jam on your route 9 kilometers ahead that

will cause an expected delay of 38 minutes.

To find the quickest route to your destination, do the following:

1. Tap the Traffic sidebar.

2. Tap Minimize traffic delays.

Your device looks for the quickest route to your destination.

The new route may also include traffic delays, or may even be the same

route as before.

3. Tap Done.

Changing traffic preferences

Use the Change Traffic preferences button to choose how traffic information

works on your device.

Download from Www.Somanuals.com. All Manuals Search And Download.

To change your traffic preferences, do the following:

1. Tap the TomTomTraffic button in the Main Menu on your device.

2. Tap Change Traffic preferences.

Change

Traffic

preferences

You can change the following preferences:

• Automatically minimize delays after every traffic update - if you select

this option, your device automatically recalculates when new delays

occur on your route.

• Beep when traffic situation on route changes - if you select this option

your device beeps when a new traffic incident occurs on your current

route.

• Ask for traffic updates when preparing a route - this option has no

effect in RDS traffic.

3. Select or clear the check box next to each preference you want to change.

4. Tap Done.

Your device lists the countries that have radio stations providing RDS-

TMC traffic information that you can currently receive. Normally you can

leave this set to Any country (strongest signal).

5. Tap Done.

Making commuting to work easier

The Home to work or Work to home buttons in the Traffic menu lets you

check your route to and from work with one tap of a button. When you use

either of these buttons, your device checks the route for possible delays, and

if it finds any, provides you with the possibility to avoid them.

The first time you use Home to work, you must set your traffic home and work

locations, do the following:

1. Tap the TomTomTraffic button in the Main Menu on your device.

2. Tap Show home-work traffic.

3. Tap Change home-work

Change home-

work

4. Set your home location

5. Set your work location.

You can now use the Home to work and Work to home buttons of the Show

home-work traffic menu.

For example, to check for delays on your route home, do the following:

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Tap the TomTomTraffic button in the Main Menu on your device.

2. Tap Show home-work traffic.

3. Tap Work to home.

The route summary screen is shown, with the expected delay shown after the

trip time.

To see if there is a quicker way home, tap Find alternative then tap Minimize

traffic delays.

Tip: You can let your device automatically look for alternative routes by

selecting Automatically minimize delays after every traffic update in the

Traffic preferences.

Checking traffic incidents in your area

Get an overview of the traffic situation in your area, using the map. To find

local incidents and their details, do the following:

1. Tap the TomTomTraffic button in the Main Menu on your device.

2. Tap Browse map.

The map browser screen is shown.

Browse map

3. Tap the blue compass image in the top right of the screen.

The map centers itself on your current location, and any traffic incidents

in the area are shown as small symbols.

4. Tap on any traffic incident to get more information.

A second screen is shown that gives you detailed information about the

incident you chose. To display information about surrounding incidents

use the left and right arrows at the bottom of this second screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the radio frequency for RDS-TMC information

If you know the frequency of a particular radio station you want to use for RDS-

TMC traffic information, do the following to set the frequency manually:

To activate this feature, you must first enable manual tuning. To do this, tap

the Traffic bar in the Driving View, then tap Change Traffic preferences. Select

Tune manually by entering a frequency and then tap Done.

1. Tap the Traffic sidebar in the Driving View.

2. Tap Tune Manually.

3. Enter the frequency of the radio station.

4. Tap Done.

Tune manually

Your TomTom device looks for your radio station. If it doesn't find a radio

station at the frequency you set, it automatically continues to search for the

next available station.

Choosing the correct country for RDS-TMC reception

If you are driving close to a country border, your device may tune to a radio

station from a neigboring country. If this happens you will only receive RDS-

TMC traffic information for that country. To set the country you want to receive

traffic information for, do the following:

1. Tap the Traffic sidebar in the Driving View.

2. Tap Change Traffic preferences.

A list of preferences you can choose is shown.

3. Tap Done.

A list of neigboring countries is shown.

4. Tap on the country that you want to receive traffic reports for.

Your TomTom device then searches for a radio station in the country you have

chosen.

The Traffic sidebar

The Traffic sidebar is shown on the right side of the Driving View when

TomTom Traffic is switched on. The Traffic sidebar shows you the traffic

incidents on your route. It shows the following information:

• A symbol for each traffic incident in the order they occur along your

planned route.

• The estimated delay to the next traffic incident on your route.

• The distance from your current location to the next incident on your route.

An example of a Traffic sidebar is shown below.

Download from Www.Somanuals.com. All Manuals Search And Download.

In the example, the Traffic sidebar shows you that there are two incidents

ahead. Both incidents are traffic jams, the first is 15km ahead and is expected

to delay you by at least 51 minutes.

To re-plan your route to avoid these incidents, tap the Traffic sidebar to open

the TomTom traffic menu, then use Minimize traffic delays.

Traffic incidents

Traffic incidents are displayed both on the Driving View and also on the Traffic

sidebar as small symbols. There are two type of symbols:

• Symbols shown in a red square are incidents that Traffic can help you avoid.

• Symbols shown in a red rectangle are weather related, because of their

nature, you cannot use Traffic to avoid them.

Traffic incident symbols and their meaning are shown below:

Accident

Road closed

Traffic incident

Traffic jam

Road works

One or more lanes

closed

Weather related symbols and their meaning are shown below:

Fog

Ice

Rain

Wind

Snow

Note: The incident avoided symbol is shown for any traffic incident that

you avoid using TomTom Traffic.

Download from Www.Somanuals.com. All Manuals Search And Download.

Traffic menu

Tap the Traffic sidebar in the Driving View to open the Traffic menu. The

following buttons are available:

Replans your route based on the latest traffic information.

Minimize

traffic delays

Checks the traffic along your Home to Work route.

Show home-

work traffic

Tap this button to show areas of traffic congestion along your current

route.

Showtrafficon

route

Shows an overview of traffic incidents on the map.

Changes the settings for Traffic services.

Browse map

Change Traffic

preferences

Download from Www.Somanuals.com. All Manuals Search And Download.

14. Introducing TomTom HOME

Introducing TomTom HOME

TomTom HOME is a free application for your computer that helps you manage

the contents of your TomTom device. Connect to HOME frequently to get the

latest updates for your device.

You can, for example, do the following:

• Manage maps, voices, POIs and more.

• Buy TomTom services and manage your subscriptions.

• Update your TomTom with the latest software and services automatically.

• Read the full version of the user manual.

Tip: To get the most from HOME, we recommend using a broadband internet

connection.

Installing TomTom HOME

To install TomTom HOME on your computer, do the following:

1. Connect your computer to the internet.

2. Connect your device to your computer using the USB cable, then switch

your device on.

HOME starts to install.

Note: If HOME does not install automatically, you can also download it from

tomtom.com/home

Once installed, TomTom HOME starts automatically when you connect your

device to your computer and turn it on.

Download from Www.Somanuals.com. All Manuals Search And Download.

15. Copyright notices

hands" logo are among the trademarks, applications or registered trademarks

owned by TomTom International B.V. Our limited warranty and end user

license agreement for embedded software apply to this product; you can

review both at www.tomtom.com/legal

den »zwei Händen« gehören zu den Warenzeichen, Anwendungen oder

registrierten Markenzeichen von TomTom International B.V. Für dieses

Produkt gelten unsere eingeschränkte Garantie und unsere

Endnutzerlizenzvereinbarung für integrierte Software, die Sie beide auf

www.tomtom.com/legal einsehen und nachlesen können.

TomTom ("deux mains") comptent parmi les marques commerciales, les

applications ou les marques déposées de TomTom International B.V.

L'utilisation de ce produit est régie par notre garantie limitée et le contrat de

licence utilisateur final relatif aux logiciels embarqués ; vous pouvez consulter

ces deux documents à l'adresse suivante : www.tomtom.com/legal

handenlogo" maken onderdeel uit van de handelsmerken, applicaties of

geregistreerde handelsmerken in eigendom van TomTom International B.V.

Op dit product zijn onze beperkte garantie en licentieovereenkomst voor de

eindgebruiker van toepassing; beide zijn te vinden op www.tomtom.com/

legal

"due mani" fanno parte dei marchi, delle applicazioni e dei marchi registrati di

proprietà di TomTom International B.V. La nostra garanzia limitata e il

contratto di licenza per l'utente finale vengono applicati a questo prodotto, è

possibile consultarli entrambi all'indirizzo www.tomtom.com/legal

manos" son marcas comerciales, aplicaciones o marcas registradas de

TomTom International B.V. Nuestra garantía limitada y nuestro acuerdo de

licencia de usuario final para el software integrado son de aplicación para este

producto; puede consultar ambos en www.tomtom.com/legal

"duas mãos" fazem parte das marcas comerciais, aplicações ou marcas

Download from Www.Somanuals.com. All Manuals Search And Download.

comerciais registadas cuja proprietária é a TomTom International B.V. A

nossa garantia limitada e contrato de licença de utilizador final relativas ao

software incorporado dizem respeito a este produto; pode consultar ambos

em www.tomtom.com/legal

hænder" er blandt de varemærker, produkter og registrerede varemærker, der

tilhører TomTom International B.V. Vores begrænsede garanti og

slutbrugerlicensaftale for indlejret software gælder for dette produkt; begge

dokumenter findes på www.tomtom.com/legal

"två händer" tillhör de varumärken, programvaror eller registrerade

varumärken som ägs av TomTom International B.V. Vår begränsade garanti

och vårt slutanvändarlicensavtal för inbyggd programvara kan gälla för denna

produkt. Du kan läsa dem båda på www.tomtom.com/legal

2008 TomTom™ ja "two hands" -logo ovat eräitä TomTom International B.V.:n

omistamia tavaramerkkejä, sovelluksia tai rekisteröityjä tavaramerkkejä.

Rajoitettu takuumme ja loppukäyttäjän käyttösopimuksemme sulautetuille

ohjelmistoille koskevat tätä tuotetta; voit tarkastaa molemmat

verkkosivuillamme www.tomtom.com/legal

logoen er blant de varemerker, programvarer og registrerte varemerker som

eies av TomTom International B.V. Vår begrensede garanti og lisensavtale

med sluttbruker for integrert programvare gjelder dette produktet. Du kan

lese om begge på www.tomtom.com/legal

d³oñmi nale¿y do znaków handlowych, aplikacji lub zastrze¿onych znaków

handlowych, których w³aœcicielem jest firma TomTom International B.V. Do

niniejszego produktu zastosowanie ma umowa licencyjna dla koñcowego

u¿ytkownika produktu oraz ograniczona gwarancja na wbudowane

oprogramowanie; oba dokumenty mo¿na przejrzeæ na stronie

www.tomtom.com/legal

dlanìmi patøí mezi obchodní znaèky, aplikace nebo registrované ochranné

známky ve vlastnictví spoleènosti TomTom International B.V. Na tento

produkt se vztahuje omezená záruka a smlouva s koncovým uživatelem pro

vestavìný software; do obou dokumentù mùžete nahlédnout na

www.tomtom.com/legal

logoları TomTom International B.V.'ye ait ticari marka, uygulama veya kayıtlı

ticari markalardır. Sınırlı garantimiz ve katıştırılmış yazılımın son kullanıcı

lisans sözleşmesi bu ürün içindir; www.tomtom.com/legal adresinden

ikisine de göz atabilirsiniz

embléma is a TomTom International B.V. által birtokolt védjegyek,

Download from Www.Somanuals.com. All Manuals Search And Download.

alkalmazások és bejegyzett védjegyek közé tartozik. A korlátozott garancia és

a benne foglalt szoftver végfelhasználói licencszerződése érvényes erre a

termékre; melyeket a következő helyen tekinthet át: www.tomtom.com/legal

kuuluvad nende kaubamärkide, rakenduste või registreeritud kaubamärkide

hulka, mille omanikuks on TomTom International B.V. Sellele tootele kehtib

meie piiratud garantii ja lõppkasutaja litsentsileping manustarkvara jaoks;

saad tutvuda mõlemaga aadressil www.tomtom.com/legal

logotips ir vienas no preču zīmēm, lietojumiem vai reģistrētām preču zīmēm,

kas pieder uzņēmumam TomTom International B.V. Šim produktam ir

piemērojama mūsu uzņēmuma ierobežotā garantija un iegultās

programmatūras gala lietotāja licences līgums, ar kuriem var iepazīties

www.tomtom.com/legal

logotipas yra TomTom International B.V. vienas iš prekių ženklų, programų

arba registruotųjų prekės ženklų. Mūsų ribota garantija ir galutinio naudotojo

sutartis naudotis įdėtąja programine įranga taikoma šiam produktui; galite

peržiūrėti abu dokumentus svetainėje www.tomtom.com/legal

les "dues mans" formen part de les marques comercials, aplicacions o

marques comercials registrades propietat de TomTom International B.V. La

nostra garantia limitada i l'acord de llicència per a usuaris finals per al

programari inclòs són aplicables a aquest producte. Podeu consultar ambdós

documents a www.tomtom.com/legal

rukami" patria medzi ochranné známky, aplikácie alebo registrované

ochranné známky vlastnené spoločnosťou TomTom International B.V. Na

tento produkt sa vzťahuje obmedzená záruka a dohoda s koncovým

užívateľom pre vstavaný softvér; viac informácií o oboch nájdete na

www.tomtom.com/legal

mãos" estão entre as marcas comerciais, aplicativos ou marcas registradas

possuídas pela TomTom International B.V. Nossa garantia limitada e acordo

de licenciamento do usuário final para o software incluído se aplicam para

este produto; ambos podem ser vistos em www.tomtom.com/legal

Data Source

openbare registers, Apeldoorn 2008.

Download from Www.Somanuals.com. All Manuals Search And Download.

This product includes mapping data licensed from Ordnance Survey with the

100026920.

Data Source

reproduced under license from Her Majesty the Queen in Right of Canada

with permission from Natural Resource Canada. Point of Interest data by Info

Data Source

Whereis® is a registered trademark of Telstra® Corporation Limited, used

under license.

Some images are taken from NASA’s Earth Observatory.

The purpose of NASA’s Earth Observatory is to provide a freely-accessible

publication on the Internet where the public can obtain new satellite imagery

and scientific information about our home planet.

The focus is on Earth’s climate and environmental change:

earthobservatory.nasa.gov/

Loquendo is a registered trademark. www.loquendo.com

Download from Www.Somanuals.com. All Manuals Search And Download.

16. Addendum

Addendum

Important Safety Notices and Warnings

Global Positioning System

The Global Positioning System (GPS) is a satellite-based system that provides

location and timing information around the globe. GPS is operated and

controlled under the sole responsibility of the Government of the United

States of America, which is responsible for its availability and accuracy. Any

changes in GPS availability and accuracy, or in environmental conditions, may

impact the operation of your TomTom device. TomTom does not accept any

liability for the availability and accuracy of GPS.

Use with Care

Use of a TomTom device for navigation still means that you need to drive with

due care and attention.

Aircraft and Hospitals

Use of devices with an antenna is prohibited on most aircraft, in many

hospitals and in many other locations. A TomTom device must not be used in

these environments.

Taking care of your TomTom device

Do not leave your TomTom device or TomTom accessories on view when you

leave your car. They may become an easy target for thieves.

You can set a password for your device which must be entered every time you

start your device.

We recommend that you use the safety preferences on your TomTom device,

where available. The safety preferences are available in the Preferences menu.

Take care of your TomTom device and clean it correctly.

• Use a soft cloth to wipe the screen of your device; do not use any liquid

cleaners.

• If your device gets wet, dry it with a soft cloth.

• Do not open the casing of your device under any circumstances. Doing so

may be dangerous and will invalidate your warranty.

• Do not use the memory card (SD card) with any device other than a

TomTom device. Other devices may damage the memory card.

• Do not expose your device to high or low temperatures, which can cause

permanent damage. For example, don’t leave it in the car on hot summer

days or during cold winter nights.

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery

This product uses a Lithium-Polymer battery. Do not use it in a humid, wet

and/or corrosive environment. Do not put, store or leave your product in or

near a heat source, in a high temperature location, in strong direct sunlight, in

a microwave oven or in a pressurized container, and do not expose it to

temperatures over 60 C (140 F). Failure to follow these guidelines may cause

the Lithium-Polymer battery to leak acid, become hot, explode or ignite and

cause injury and/or damage. Do not pierce, open or disassemble the battery.

If the battery leaks and you come into contact with the leaked fluids, rinse

thoroughly with water and seek medical attention immediately. For safety

reasons, and to prolong the lifetime of the battery, charging will not occur at

low (below 0 C/32 F) or high (over 45 C/113 F) temperatures.

Temperatures: Standard operation: -10 C (14 F) to +55 C (131 F); short period

storage: -20 C (-4 F) to + 60 C (140 F); long period storage: -20 C (-4 F) to

+25 C (77 F).

THE LITHIUM-POLYMER BATTERY CONTAINED IN THE PRODUCT

MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE YOUR

TomTom ONLY WITH THE SUPPLIED DC POWER CABLE (CAR

CHARGER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER)

FOR BATTERY CHARGING.

To recycle your TomTom unit please see your local approved TomTom

service center.

SPECIAL NOTE REGARDING DRIVING IN CALIFORNIA AND MINNESOTA

California Vehicle Code Section 26708 (a) (1) provides that “No persons shall

drive any motor vehicle with an object or material placed, displayed, installed,

affixed or applied upon the windshield or side or rear windows.” Drivers in

California should not use a suction mount on their windshield, side or rear

windows.

Note: this section of the California Vehicle Code applies to anyone driving in

California, not just California residents.

Minnesota State Legislature Statutes Section 169.71, subdivision 1, section 2

provides that “A person shall not drive or operate with any objects suspended

between the driver and the windshield other than sun visors and rearview

mirrors and electronic toll collection devices.”

Note: this Minnesota Stature applies to anyone driving in Minnesota, not just

Minnesota residents.

TomTom Inc. bears no responsibility for any fines, penalties or damage that

may be incurred by disregarding this notice. While driving in any state with

windshield mounting restrictions, TomTom recommends the use of the

supplied Adhesive Mounting Disk or its Alternative Mounting Kit, which

includes multiple options for mounting TomTom devices on the dashboard

and using the air vents. See www.tomtom.com for more information about

this mounting option.

FCC Information for the User

This product contains a transmitter which must not be co-located or

simultaneously operated in conjunction with any other transmitter.

Exposure to Radio Frequency Radiation

This device complies with FCC radiation exposure limits set forth for an

uncontrolled environment. In order to avoid the possibility of exceeding the

FCC radio frequency exposure limits, human proximity to the antenna shall

not be less than 8 inches (20 cm) during normal operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio and Television Interference

This equipment radiates radio frequency energy and if not used properly - that

is, in strict accordance with the instructions in this manual - may cause

interference to radio communications and television reception.

This device has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation distance between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user‘s authority to operate the equipment.

Important

This equipment was tested for FCC compliance under conditions that included

the use of shielded cables and connectors between it and the peripherals. It is

important that you use shielded cables and connectors to reduce the

possibility of causing radio and television interference. Shielded cables

suitable for the product range can be obtained from an authorised dealer. If

the user modifies the equipment or its peripherals in any way, and these

modifications are not approved by TomTom, the FCC may withdraw the user’s

right to operate the equipment. For customers in the USA, the following

booklet prepared by the Federal Communications Commission may be of

help: “How to Identify and Resolve Radio-TV Interference Problems”. This

booklet is available from the US Government Printing Office, Washington, DC

20402. Stock No 004-000-00345-4.

FCC Declaration of Conformity

Tested to comply with FCC Standards for Home or Office Use

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Responsible party in North America

TomTom, Inc., 150 Baker Avenue Extension, Concord, MA 01742

Tel: 866 486-6866 option 1 (1-866-4-TomTom)

Emissions information for Canada

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

This category II radiocommunication device complies with Industry Canada

Standard RSS-310.

Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-

310 d’Industrie Canda.

CE Marking

This equipment complies with the requirements for CE marking

when used in a residential, commercial, vehicular or light industrial

environment.

R&TTE directive

Hereby, TomTom declares that this personal navigation device is in

compliance with the essential requirements and other relevant provisions of

the EU Directive 1999/5/EC. The declaration of conformity can be found here:

www.tomtom.com/lib/doc/DoC_ONE-4.pdf

WEEE directive

This symbol on the product or its packaging indicates that this

product shall not be treated as household waste. In line with EU

Directive 2002/96/EC for waste electrical and electronic equipment

(WEEE), this electrical product must not be disposed of as unsorted

municipal waste. Please dispose of this product by returning it to the point of

sale or to your local municipal collection point for recycling.

C-tick

N14644

Z468

This product displays the C-tick to show it complies with relevant

Australian and New Zealand regulations.

Warning for Australia

The user needs to switch off the device when exposed to areas with

potentially explosive atmospheres such as gas stations, chemical storage

depots and blasting operations.

Responsible party in Australia

TomTom Australia, Building 1, Suite 3, Level 3 , 3 Richardson Place, North

Ryde NSW 2113, Australia

Tel: +612 8875 1700

This Document

Great care was taken in preparing this manual. Constant product development

may mean that some information is not entirely up-to-date. The information in

this document is subject to change without notice.

TomTom shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from

the performance or use of this material. This document contains information

Download from Www.Somanuals.com. All Manuals Search And Download.

protected by copyright. No part of this document may be photocopied or

reproduced in any form without prior written consent from TomTom

International B.V.

Download from Www.Somanuals.com. All Manuals Search And Download.

Telex Network Card XO 1 User Manual
Texas Instruments Laptop 51X User Manual
Toshiba All in One Printer 200L User Manual
Transition Networks Network Card CSRFB10XX 100 User Manual
Tripp Lite Computer Accessories B130 101S WP User Manual
Uniden Cordless Telephone DECT2060 User Manual
Viking Cooktop F20562D User Manual
VTech Cordless Telephone mi6861 User Manual
Vulcan Hart Boiler GHCB44 User Manual
Wagner SprayTech Paint Sprayer AC 4600 Professional User Manual