Register your product at
W-242 842-095000 NA
THANK YOU FOR PURCHASING YOUR TIMEX® WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for
$5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal
business hours. Payment must be made within 30 days of purchase. Name, address, telephone
number, purchase date, and 5-digit model number required. You can also mail a check for $5 to:
Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex® watch. Your model
may not have all of the features described in this booklet.
OPERA
FEATURES AND BASIC
FEATURES AND BASIC OPERATION
• Time with 12- or 24-hour format
• Day and date
• 2nd time zone
• Optional hourly chime
• 24-hour stopwatch
• 24-hour countdown timer
• Daily alarm
• INDIGLO® night-light
Press MODE repeatedly to step through modes: Time, Stopwatch (SP), Alarm (AL), Timer (TR),
and Time 2 (T2). Press MODE to exit current mode and return to Time mode.
SET
START/STOP
(DONE)
(INCREASE VALUE)
SU MO TU
WE TU FR SA
DATE
MODE
(NEXT STEP)
INDIGLO® BUTTON
Button functions shown with setting functions in parentheses
TIME
To set time and date:
1) With time and date showing, press SET and hold for 2 seconds.
2) Seconds flash. Press START/STOP to round time to nearest minute, setting seconds to zero.
3) Press MODE. Hour flashes. Press START/STOP to change hour, including AM (no symbol)
and PM.
4) Press MODE. Minutes flash. Press START/STOP to change minutes; hold button to scan values.
5) Press MODE. Month flashes. Press START/STOP to change month.
6) Press MODE. Date flashes. Press START/STOP to change date.
7) Press MODE. Day flashes. Press START/STOP to change day.
8) Press MODE. Time format flashes. Press START/STOP to select 12- or 24-hour time format.
12-hour format has AM/PM.
9) Press SET, at any step, to exit and save settings.
Date (day of month) appears in upper part of display in Time mode. Press and hold START/STOP
to see month and date in large digits.
STOPWATCH
This mode provides a stopwatch function for timing events. Press MODE repeatedly until
SP appears.
To start, press START/STOP. Stopwatch counts up by hundredths of a second up to 30 minutes,
then by seconds up to 24 hours before starting over. Day of week indicators cycle forward and
runners icon R flashes to indicate stopwatch is running.
To stop, press START/STOP. Runners icon freezes to indicate stopwatch is stopped.
To resume, press START/STOP, or to reset (clear) stopwatch, press SET.
While stopwatch is running, press SET to take lap/split and see your time up to that point. Display
freezes while stopwatch continues to run. Press SET to resume display of running stopwatch.
Stopwatch continues to run if you exit mode. Runners icon flashes in all modes.
ALARM
Watch has a daily alarm. Press MODE repeatedly until AL appears.
To set alarm:
1) Press SET and hold for 2 seconds. Hour flashes. Press START/STOP to change hour, including
AM (no symbol) and PM.
2) Press MODE. Minutes flash. Press START/STOP to change minutes; hold button to scan values.
3) Press MODE. Time zone flashes. Press START/STOP to select whether alarm is referenced to
time shown in Time mode (t1) or Time 2 (t2).
4) Press SET, at any step, when done setting.
To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through
four combinations of alarm and chime settings. Bell icon b or ALARM or AL appears when alarm
is on. CHIME or CH appears when hourly chime is on – watch will chime on every hour.
When alarm sounds, press any button to silence. If no button is pressed, alarm will sound for
20 seconds. If watch is in Time mode, alarm display will pop up for duration of alert.
Alarm repeats daily unless turned off.
TIMER
This mode provides a countdown timer with alert. Press MODE repeatedly until TR appears.
To set countdown time:
1) Press SET and hold for 2 seconds. Hours flash. Press START/STOP to change hours; hold button
to scan values.
2) Press MODE. Minutes flash. Press START/STOP to change minutes.
3) Press MODE. Seconds flash. Press START/STOP to change seconds.
4) Press SET, at any step, when done setting.
To start timer, press START/STOP. Day of week indicators cycle backward and timer icon T or
TR flashes to indicate timer is running.
To pause countdown, press START/STOP. Timer icon freezes to indicate timer is stopped.
To resume countdown, press START/STOP, or to reset and set countdown, press SET and hold for
2 seconds.
When countdown is within 10 seconds of completion, watch beeps once every second. Watch
beeps repeatedly when countdown ends (timer reaches zero). Press any button to silence. Press
SET to reset and set countdown.
Timer continues to run if you exit mode. Timer icon flashes in all modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
|