Digital Heart Rate Monitor
English
page 1
Français
Español
Português
Italiano
Deutsch
page 39
página 85
página 129
pagina 173
Seite 219
Nederlands pagina 265
Download from Www.Somanuals.com. All Manuals Search And Download.
W270 EU 103-095001
rECall ...............................................................................................................21
Reviewing your Workout Data..........................................................................22
Locking Workouts in Recall ..............................................................................23
hrM SETUP........................................................................................................24
To Set a Target Heart Rate Zone.......................................................................24
To Choose a Target Heart Rate Zone................................................................25
Digital Heart Rate Monitor Notes & Tips ..........................................................26
USEr INFo..........................................................................................................26
alarM................................................................................................................27
CarE & MaINTENaNCE....................................................................................28
Digital Heart Rate Monitor................................................................................28
Digital Heart Rate Sensor Battery ....................................................................29
Watch Battery...................................................................................................31
INDIGlo® NIGhT-lIGhT......................................................................................31
WaTEr rESISTaNCE..........................................................................................31
Watch................................................................................................................31
Digital Heart Rate Sensor .................................................................................32
WarraNTy & SErvICE.....................................................................................32
FCC NoTICE (U.S.) / IC NoTICE (CaNaDa)......................................................35
DEClaraTIoN oF CoNForMITy.....................................................................36
INTroDUCTIoN
Welcome!
Thank you for purchasing your new Timex® Ironman® Target Trainer
Heart Rate Monitor watch with TapScreen™ Technology. This new
generation of performance tools was developed in conjunction with
world-renowned athletes who helped make sure that the Target
Trainer watch’s features are relevant to your training needs. If you
are running for the first time or training for your 10th marathon, this
watch will help you along your way.
Congratulations!
With your purchase of this Timex® Ironman® Digital Heart Rate
Monitor you have hired a new personal trainer. Your Digital Heart
Rate Monitor offers you the ability to track, store, and analyze key
indicators of your personal fitness level over 3 workouts.
You will find your Digital Heart Rate Monitor to be a user-friendly
fitness tool. But, like any new device, you should take the time to
familiarize yourself with its components to optimize its usefulness.
So, check out the features and functions of your Digital Heart Rate
Monitor to develop a basic understanding of this fitness tool. But
most of all, enjoy your new partner on the road to increased fitness!
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Print resources
a Fit heart
heart Zones® Tools for Success (U.S. customers only):
Information to use your Digital Heart Rate Monitor in conjunction
with the Heart Zones® Training System fitness program, meant to
help you to increase the strength and endurance of your heart.
Recent fitness findings indicate that anyone can get fit and stay fit
without being overzealous. It can be as simple as:
• Exercising 3 to 4 times per week.
• Exercising for 30 to 45 minutes during each exercise session.
• Exercising at the appropriate heart rate.
Heart rate represents the effects of exercise on all parts of the
body. Selecting the appropriate heart rate zone conditions the
heart, lungs, and muscles to perform at optimal levels to get and
keep your body in shape. Once set, your Digital Heart Rate Monitor
can automatically show you when you are in the exercise zone
you choose and signal you when you are not. It can help keep your
body exercising at an intensity level that can help you achieve your
desired fitness objectives without over or under exercising.
Web resources
Timex® websites offer beneficial information to help you optimize
your Digital Heart Rate Monitor.
Heart Rate Monitors, including product features and simulations.
Timex® Heart Rate Monitors.
WarNING:
This is not a medical device and is not recommended for use
by persons with serious heart conditions. Consult your physi-
cian before beginning any exercise program.
Interference with the radio signal, poor contact between your skin
and the Digital Heart Rate Sensor, or other factors may prevent
accurate transmission of heart rate data.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
H
Hourglass icon indicates the watch is timing your workout in
Interval Timer or Timer Mode.
WaTCh MoDES/bUTToNS
j Repeat icon in Interval Timer or Timer Mode indicates you have
set the timer to repeat at the end of a countdown cycle.
x
N
Alarm clock icon indicates you have set the alarm to alert you
at a designated time.
Melody icon indicates you have set the hourly chime to sound
every hour on the hour.
INDIGlo®
NIGhT-lIGhT
SToP/rESET/SET
Small heart/timer icon in Time of Day or Recovery Mode when
the watch is tracking a heart rate recovery.
STarT/SPlIT
Indicates the TapScreen™ Technology is activated.
k
Indicates that the Night-Mode® feature is active and any
button press will illuminate the INDIGLO® night-light.
MoDE
hEarT raTE
Watch Modes
Press MODE to cycle through the watch main functions
TIME > ChroNo > INTErval TIMEr > TIMEr > rECovEry >
rECall > hrM SETUP > USEr INFo > alarM
Most modes use the watch buttons in the same way, and button
labels are displayed on-screen close to the button.
SToP/rESET/SET (DoNE) = enter, accept and exit
MoDE (NEXT) = advance to next setting option
STarT/SPlIT (+) = increase/advance the setting value
hEarT raTE(-) = decrease/reverse the setting value
Display Icons and Descriptions
y
Flashing heart icon indicates watch is searching for a signal
from the Digital Heart Rate Sensor. This icon will flash as long
as the watch receives a signal from the Digital Heart Rate
Sensor.
w
Stopwatch icon indicates the watch is timing your workout in
Chrono Mode.
Note: Hold either button to rapidly increase/advance or decrease/
reverse the setting value.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
5
For setting, press STOP/RESET/SET and then follow the instructional
prompts (+, –, NEXT, DONE) that appear on the display.
Zone
%
Goal
Light exercise
benefit
1
50% to 60%
Maintain a healthy heart and
get fit
Determining your optimal heart rate Zone
There are five basic heart rate target zones. Simply select a zone
that matches your percent of maximum (%) heart rate based on the
fitness goal you want to achieve during a particular exercise. Before
you can set your %, you first need to determine your maximum
heart rate. You can use many methods to estimate your maximum
heart rate. The booklet “Heart Zones® Tools For Success” included in
your Personal Heart Rate Monitor packaging (U.S. customers only)
provides excellent procedures and Timex recommends you use one
of these methodologies.
2
3
60% to 70%
70% to 80%
Weight management
Aerobic base building
Lose weight and burn fat
Increase stamina and aerobic
endurance
4
5
80% to 90%
Optimal conditioning
Sustain excellent fitness
condition
90% to 100%
Elite athletic training
Achieve superb athletic condition
However, if you cannot use any of the procedures you might
consider using the government recommended age-based method.
Begin with the number 220 and then subtract your age. For
instance, a 35-year old would begin with 220 and subtract 35
(her age), which gives an estimated maximum heart rate of 185.
Once you know your maximum heart rate, you can set the zones
described in the following table.
GETTING STarTED WITh yoUr hEarT raTE
MoNITor
before you begin
Once you have determined your fitness goal and maximum heart
rate, Timex recommends you input this information into the HRM
SETUP Mode. This will allow you to tailor your Digital Heart Rate
Monitor to your personal parameters.
To Use your Digital heart rate Monitor
1. Wet the Digital Heart Rate Sensor pads.
2. Center the Sensor on your chest with the
Timex® logo facing up and out and fasten it
firmly, just below your sternum.
3. Standing at least six feet (two meters) away
from other heart rate monitors or other
Download from Www.Somanuals.com. All Manuals Search And Download.
8
7
sources of radio or electrical interference, press MODE until your
desired mode appears. You can view heart rate information in
Time of Day, Chrono, Interval Timer or Timer Modes.
4. Press the HEART RATE button on your watch if the flashing heart
icon does not appear.
NO HRM DATA on the watch display. Try the following:
• Shorten the distance between the watch and the Digital Heart
Rate Sensor.
• Adjust the position of the Digital Heart Rate Sensor and elastic
chest strap.
• Make sure the Digital Heart Rate Sensor pads are wet.
5. Begin your workout.
NoTE: The watch automatically records your heart rate and other
statistical data about your workout (available in Review Mode) only
if you run Chrono Mode during your workout.
• Check the battery in the Digital Heart Rate Sensor and replace it
if necessary.
• Move away from other heart rate monitors or other sources of
radio or electrical interference.
6. If the watch is set to alert you when you go above or below your
chosen target heart rate zone press and hold HEART RATE to
turn the audible alert off. Otherwise it will continue beeping until
you return to your target zone. When you are turning the audible
alert off, you will see the message HOLD ALERT OFF. Continue
pressing HEART RATE until you see the message AUDIBLE ALERT
OFF. Conversely, when you are turning the audible alert on, you
will see the message HOLD ALERT ON. Continue pressing HEART
RATE until you see the message AUDIBLE ALERT ON.
7. When you have finished your workout in Chrono Mode, press
STOP/RESET/SET to stop recording data for the workout, and
press and hold STOP/RESET/SET to save your workout.
8. Press MODE until you see Review Mode. This Mode includes
heart rate and other statistical data about your workout.
TaPSCrEEN™ TEChNoloGy
The TapScreen™ Technology works with one firm tap on the watch
face. TapScreen™ Technology is used for CHRONO, INTERVAL TIMER,
and TIMER modes. The tap sensitivity can be adjusted to light (LITE),
medium (MED), hard (HARD), or off (OFF). The watch comes with a
medium default setting.
1. In TIME mode press and hold the STOP/RESET/SET button.
2. Press the MODE (NEXT) button until TAP FORCE appears.
3. Press START/SPLIT (+) or HEART RATE (-) to select LITE, MED,
HARD, or OFF for the tap force.
Tips:
• We recommend you select your TAP FORCE depending on the
activity you are performing: Walking (LITE), Running (MED),
Biking (HARD) and Swimming (HARD).
Digital heart rate Monitor Notes & Tips
The watch and the Digital Heart Rate Sensor need to be within three
feet (one meter) of each other to function properly. If the watch is
not receiving heart rate information, you may receive the message
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
• If you are experiencing higher TAP activations inadvertently,
move your tap force to the next level.
Tips:
• You can easily switch from TIME 1 to TIME 2 and vice versa by
• If you are in a triathlon transition or just changing clothes, we
recommend you press MODE to switch to the TIME mode to
avoid accidental tap activation of the chronograph which will
continue running in the background.
pressing and holding the START/SPLIT button for 5 seconds.
ChroNoGraPh
The chronograph will time and record your workout session. During
your event, recording laps/splits will give you real-time feedback
to pace yourself and allow you to adjust your effort to meet your
overall training goals.
Return to CHRONO when you are finished.
TIME oF Day
1. Press MODE until Time of Day appears.
2. Press and hold STOP/RESET/SET to start.
lap/Split
Lap is the time to complete an individual segment of your workout.
Split is the cumulative time from the beginning to that specific point
in your workout. Below is an example of a 4-mile run. The runner
records laps/splits every mile.
3. Press START/SPLIT (+) or HEART RATE (-) to increase or decrease
or select values for Time Zone (1 or 2), Hours, Minutes, Seconds,
Month, Day, Date, Year, 12/24-Hour Format, Date Format, Hourly
Chime, Button Beep and Tap Force.
4. Press NEXT to set each field as desired and proceed to the next
one.
5. Press STOP/RESET/SET (DONE) to exit.
Tips:
• The date format can be selected as month-date (MMM-DD),
day-month (DD, MMM), month-day-year (MM-DD-YY) or
day-month-year (DD.MM.YY).
Second Time Zone
Your watch has two time zones that are useful when you are travel-
ling to a place with a different time zone or when you are switching
to daylight savings time.
This watch records up to 100 hours and counts up to 200 laps. It
stores the most recent 200 laps in Recall Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
11
4. Press STOP/RESET/SET (DONE) to exit or press MODE (NEXT) to
set up the Target Time feature (described later in this section).
Using the Chronograph
1. In CHRONO Mode, TAP your screen to START.
2. TAP your screen every time you need to log a LAP/ SPLIT.
3. Press STOP/RESET/SET to finish.
Note:
If you are receiving a heart rate signal, you have further options for
the Chrono display.
4. Press and Hold STOP/RESET/SET to reset the CHRONO.
Press HEART RATE to change to:
WKOUT SAVED will appear in your screen to notify you that your
workout was automatically saved, and can be viewed in Recall
mode.
• Heart rate on top line with Chrono on middle and bottom lines
• Heart rate on middle lines with Chrono on top and bottom lines
• Heart rate only data
Tips:
• Chrono only data
• You can also use the START/SPLIT button to start your chrono
and take laps.
• Unless workouts are locked, saving a workout will replace the
oldest workout in memory.
• You can take up to 200 laps across three workouts. Please
consider that each succeeding workout will require three laps
of storage that will be used to stamp the time/date, target time,
and delta times for that workout.
TarGET TIME PaCEr
Because pace is important to achieve your goals, a built-in audible
tracker indicates whether your target lap times are achieved. Rise
above or fall below your predetermined target times, and varying
chimes and messages will provide feedback. Slow beeps indicate
you’re behind pace (SLOW), a single beep lets you know you’re
on pace (ON-PACE) and rapid beeps tell you are ahead (FAST). The
screen will also display your performance data.
Changing the Chronograph Display Format
This determines what is shown in middle and bottom lines of the
display. The middle line has the larger font. You have the option for
LAP/SPLIT, SPLIT/LAP, LAP#/SPLIT, and LAP#/LAP.
1. Press Mode until CHRONO appears.
2. Press STOP/RESET/SET to start setting.
Setting the Target Time Pacer
1. Press MODE until CHRONO appears (Chrono reads 00:00:00 or
press STOP/RESET/SET to reset).
2. Press STOP/RESET/SET to start setting.
3. Press MODE (NEXT) button until TARGET TIME appears.
4. Press START/SPLIT (+) or HEART RATE (-) to turn TARGET TIME ON
or OFF.
3. Press START/SPLIT (+) or HEART RATE (-) to select the display
format.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
13
5. If you select ON, press the MODE (NEXT) button until Target Pace
(TRGT PACE) appears.
6. Press START/SPLIT (+) or HEART RATE (-) to enter the Target Pace
per lap time in hours (HH), minutes (MM) and seconds (SS).
Target Pace per lap can be set from a minimum of 1 minute
(1.00) to a maximum of 1 hour (1:00.00).
7. Press MODE (NEXT) button to enter the (TRGT RANGE) which is
the margin of error (+/-) you are willing to consider your lap as
“ON-PACE”. When Target Range appears, enter minutes (MM)
and seconds (SS).
hyDraTIoN aND NUTrITIoN TIMErS
The optional hydration and nutrition timers will prompt you when
it’s time to drink or eat. This countdown timer will repeat and will
run parallel to your chronograph.
Setting the hydration and Nutrition Timers
1. Press MODE until CHRONO appears.
2. Press SET to start.
3. Press MODE (NEXT) button until Hydration (DRINK) appears.
4. Press START/SPLIT (+) or HEART RATE (-) to turn it ON.
8. Press MODE (NEXT) button until Target Distance (TARGET DIST)
5. Press MODE (NEXT) button to move to the time section and press
START/SPLIT (+) or HEART RATE (-) to set the time.
appears.
9. Press START/SPLIT (+) or HEART RATE (-) to select either OFF or
6. Press MODE (NEXT) to select and to repeat the setting process
for the Nutrition (EAT) timer.
ON.
10. If you select ON, press MODE (NEXT) button until Target Distance
(TARGET DIST) appears.
7. Press STOP/RESET/SET (DONE) to finish.
INTErval TIMEr WITh labElS
11. Press START/SPLIT(+) or HEART RATE (-) and MODE (NEXT) to set
Complex interval training routines become automatic and effortless
with two interval programs, each with up to 8 labeled intervals
that can be started or stopped with the TapScreen™ Technology
interface. We also added labels to help you see the intensity you
should follow in your training (Interval #, WARM, SLOW, MED, FAST
and COOL).
the Target Distance number.
12. Press MODE (NEXT) to set the Target Distance Unit.
13. Press START/SPLIT (+) or HEART RATE (-) to select either miles
(MI) or kilometers (KM).
14. To finish, press STOP/RESET/SET (DONE). If a Total Target
Distance was set, the watch will estimate and display your
TARGET TOTAL time based on the Target Pace and Target
Distance you just provided in previous steps.
Setting Interval Timers
1. Press MODE until INT TIMER appears.
2. Press STOP/RESET/SET to select the workout you want to use
(WKOUT-1 or 2) using the (+) or (-), and press MODE (NEXT).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
15
• If your workout was set with REPEAT AT END, you will see the
repetition counter on the bottom line.
3. To select the interval (1-8) press START/SPLIT (+) or HEART RATE
(-).
3. Tap the watch lens, or press STOP/RESET to stop the Interval
Timer once you reach all the repetitions that you need to do.
4. Press MODE (NEXT) to set the interval time (HH:MM: SS) with
START/SPLIT (+) or HEART RATE (-).
4. When finished, press and hold STOP/RESET to reset the Interval
Timer to the original time. If you press and hold STOP/RESET a
second time you will clear the timer to 0.
5. Press MODE (NEXT) to select the HEART RATE ZONE (None, 1-5,
or C1-C5).
6. Press Mode (NEXT) to select interval name (Interval #, WARM-UP,
SLOW, MEDIUM, FAST and COOL) with START/SPLIT (+) or HEART
RATE (-).
7. Press MODE (NEXT) to select STOP AT END or REPEAT AT END
with START/SPLIT (+) or HEART RATE (-). Repeat all these steps
until you have set all intervals needed for your workout.
Tips:
• H appears in Time display when interval timer is running. j,
appears when interval timer is running and set to repeat at end.
• If you select REPEAT AT END the timer will countdown all
intervals and then repeat the entire sequence.
• INDIGLO® night-light flashes and the interval timer melody will
8. Press SET when done.
sound between each interval.
Using the Interval Timer
1. Tap the watch lens, or press START/SPLIT to start the Interval
Timer.
• The interval timer will continue to run if you exit the INT TIMER
mode.
• If you want to view the Time of Day, press and hold MODE,
release to return to current INT TIMER.
2. An Interval timer melody chime will sound when the Timer
reaches zero and then starts the next interval timer.
CoUNTDoWN TIMEr
The Timer is used to countdown a fixed event time. The timer can be
set to repeat and countdown continuously, or to stop at the end of
the countdown. You can use the TapScreen™ Technology to activate
and stop the timer at any time.
START
INT 1
(slow 3:00)
INT 2
(fast 2:00)
(x10)
Setting the Timer
1. Press MODE until TIMER appears.
• The display will show the label at the top of the timer (Interval#,
WARM, SLOW, MED, FAST and COOL).
Download from Www.Somanuals.com. All Manuals Search And Download.
18
17
• Timer will continue to run if you exit Timer mode.
2. Press STOP/RESET/SET to begin setting the timer.
3. Press START/SPLIT (+) or HEART RATE (-) to increase/decrease the
countdown timer values.
• The INDIGLO® night-light flashes and the timer melody will
sound when the timer countdowns to zero.
4. Press MODE (NEXT) to advance to the next setting option.
5. Press START/SPLIT (+) or HEART RATE (-) to select STOP AT END or
REPEAT AT END.
rECovEry
about recovery heart rate
Heart rate recovery provides an indicator of fitness and training
level. As you become more fit, your heart rate should return more
quickly to a lower heart rate value at the end of your workout,
indicating a higher level of cardiovascular fitness.
a slower recovery rate might also indicate a need to take a
break from training due to fatigue, illness, or other factors.
Your recovery rate represents the change in your heart rate over a
period of time. Your Digital Heart Rate Monitor records the change
in your heart rate for any of five preset periods. To set the recovery
timer duration:
1. Press MODE until RECVRY appears.
2. Press STOP/RESET/SET to clear the last thorough heart rate
recovery reading, if necessary.
3. Press STOP/RESET/SET to toggle a 30-second, one-, two-, five-, or
ten-minute recovery time, or to turn the timer OFF.
While running the chronograph, the recovery heart rate timer will
begin automatically after pressing STOP/RESET/SET if the watch is
receiving data from the Digital Heart Rate Sensor, and the recovery
timer is set for a time duration.
6. Press STOP/RESET/SET (DONE) to finish the setting process.
Using the Timer
1. Tap the watch lens, or press START/SPLIT to start Timer.
2. A timer melody chime will sound when the Timer reaches zero
and stops and repeats. The melody can be turned off with the
press of any button.
3. If you need to stop or pause the timer, tap the watch lens or
press STOP/RESET/SET.
4. When finished, press and hold STOP/RESET/SET to reset the
Timer to the original time. If you Press and hold STOP/RESET/SET
a second time you will clear the timer to 0.
Note: If the Repeat timer is set under 15 seconds a single beep will
ring between repetitions.
Tips:
•
H appears in Time display when Timer is running. j appears
when timer is running and set to repeat at end.
• For repeat Timer operation, repetition number appears on
bottom of screen.
• Maximum number of counted repetitions is 99.
NoTE: The watch cannot record a recovery unless it is receiving a
current heart rate and a valid pulse from the Digital Heart Rate
Download from Www.Somanuals.com. All Manuals Search And Download.
20
19
Sensor. Without a current heart rate or if the ending rate is higher
Data groupings appear in the order listed.
• Total Time: The amount of time the chronograph was running
during your workout.
than the starting heart rate, the display will read NO REC.
To Manually Determine a recovery heart rate
You can also manually initiate a recovery heart rate without
stopping the chronograph by following these steps.
1. Press MODE until RECVRY appears.
2. Press STOP/RESET/SET to clear the last heart rate recovery
reading, if necessary.
• laps Stored: The number of laps in the workout.
• Time In Zone: time spent in a pre-selected heart rate zone.
• average heart rate: The average achieved during a workout.
• Peak heart rate: The highest recorded during a workout.
• Minimum heart rate: The lowest recorded during a workout.
• Total Calories: The Calories burned during a workout.
• recovery heart rate: The result of the most recent recovery
heart rate calculation.
• average lap: The average time of all laps recorded.
3. Press STOP/RESET/SET to select a recovery time.
4. Press START/SPLIT. The top line of the watch display will show
the heart rate at the beginning of the recovery period (on the left)
as well as your current heart rate. The bottom line will show the
recovery countdown.
• best lap: The fastest lap recorded in the workout.
• lap or Split recall: The amount of time and average heart rate
for the last 200 laps (segments) of your workout.
5. After the countdown, the watch will beep indicating the end of
the recovery period. The watch will capture your heart rate a
second time, subtract the second value from the first value and
display the difference as the recovery (R value).
NoTE: The watch cannot start or record a recovery unless it is
receiving a current heart rate and a valid pulse from the Digital
Heart Rate Sensor. Without a current heart rate or if the ending rate
is higher than the starting heart rate, the display will read NO REC.
reviewing your Workout Data
1. Press MODE until RECALL appears.
2. Press START/SPLIT to select the date/time of the workout you
want to review. Your workouts appear in reverse chronological
order.
3. Once you find the workout you want to review, press STOP/
RESET/SET to review all the information saved in that workout.
• Press START/SPLIT (+) or HEART RATE (-) to review your data
• If your Target Time Pacer was ON, you will be able to review
6. You can continue to initiate a recovery period by repeating steps
2 through 4.
rECall
The dated training log will enable you to review your CHRONO
workout performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
21
your settings of the target time pacer (target pace, target
distance and target total), your actual lap/split times, your delta
results per lap (+/- from target time per lap with labels), Total
delta time (if a Total Target Distance was set), best lap and
average lap.
hrM SETUP
To customize your digital heart rate monitor, follow these simple
steps.
1. Press MODE until HRM SETUP appears. The screen will show the
last item viewed or changed:
• HR Format (BPM or %-Max)
• Zone Alert (ON/OFF)
• Target Zone (5 Based on Max HR or 5 Custom Ranges)
• Max Heart Rate
2. To choose another item to set up, press START/SPLIT (+) or HEART
RATE (-).
3. To set, press STOP/RESET/SET and a choice (or digit) will flash.
4. Make the desired adjustment by pressing START/SPLIT (+) or
HEART RATE (-). In some setting groups pressing START/SPLIT (+)
will increase a value and pressing HEART RATE (-) will decrease a
value. At other times pressing START/SPLIT (+) or HEART RATE (-)
will toggle between two options or cycle through a setting group.
4. Press SET (DONE) to exit.
locking Workouts in recall
Locking a workout prevents it from automatic deletion as new work-
outs are performed.
1. Press MODE until RECALL appears.
2. Press START/SPLIT to scroll among your workout dates.
3. Once you find the workout press and hold HEART RATE to LOCK.
A small lock icon l will appear along with the workout date to
confirm the data’s status.
4. To unlock any workout repeat the three steps above and press
and hold HEART RATE to UNLOCK.
Tips:
• In order to LOCK your latest workout you must reset the Chrono
(00:00:00) to save the workout.
• As the memory is filled (3 workouts maximum), the oldest
unlocked workouts are automatically deleted.
5. Press MODE (NEXT) to move to the next digit or setting group you
want to set.
6. Press STOP/RESET/SET (DONE) to save your changes and exit the
setting process.
If two workouts are locked and the memory has fewer than 30
laps available, the watch will signal that memory is becoming full
by displaying “x laps free”. Once no memory is available the watch
will display “memory full” and it will be necessary to unlock saved
workouts to free up the space for the next workout to be recalled.
7. Press MODE to exit HRM SETUP.
To Set a Target heart rate Zone
You can choose one of the Preset Target Zones based on Max Heart
Rate or set up to 5 custom Target Heart Rate Zones. Your Target
Download from Www.Somanuals.com. All Manuals Search And Download.
24
23
Heart Rate Zone range will be displayed in the same manner as set
up under HR Format.
5. Press START/SPLIT (+) to increase, or press HEART RATE (-) to
decrease the flashing value.
The Preset Heart Rate Zones described in the table below are
applied to your maximum heart rate.
6. Press MODE (NEXT) to move to the next digit’s value.
7. When you have finished setting the upper and lower target heart
rate zone limits, you can press STOP/RESET/SET (DONE) to save
your settings and exit the zone setting process.
NoTE: You will not hear an out-of-zone indicator unless the
HR-ZONE ALERT is set to “ON” in HRM Setup mode.
The Custom Target Heart Rate Zone allows you to individualize your
lower and upper target heart rate zone limits when the 10% range in
the Preset Heart Rate Zones is either too large or too small for your
exercise goals.
Zone
lower lImit
50%
Upper limit
60%
1
2
3
60%
70%
70%
80%
80%
90%
90%
4
5
100%
Digital heart rate Monitor Notes & Tips
• At any time during the setting process, you can save your
changes and return to the main heart rate display by pressing
STOP/RESET/SET (DONE).
• While setting the watch, if you do not press any buttons on the
watch for a period of 2 to 3 minutes, the watch will automatical-
ly save whatever changes you have made and exit the setting
process.
To Choose a Target heart rate Zone
1. Press MODE until HRM SETUP appears.
2. Press START/SPLIT (+) or HEART RATE (-) until HR-ZONE appears
with a zone on the middle line and a range on the bottom line of
the display.
3. Press STOP/RESET/SET to enter the Zone Selection setting
process, and then press START/SPLIT (+) or HEART RATE (-) to
cycle through the target heart rate zones (labeled ZONE 1 to
ZONE 5 or ZONE C1 to ZONE C5).
4. To select any Target Heart Rate Zone, press STOP/RESET/SET
(DONE), or to set a Custom Target Heart Rate Zone range, press
USEr INFo
Entry of this information helps to personalize and refine the Calories
Burned data computed by the digital heart rate monitor.
1. Press MODE until USER INFO appears. The screen will show the
last item viewed or changed:
MODE (NEXT).
Download from Www.Somanuals.com. All Manuals Search And Download.
26
25
• Birthday
• Weight (pounds or kilograms)
• Height (inches or centimeters)
• Activity Type (Bike, Brick, Hike, Interval, Other, Race, Row, Run,
Ski, Strength, Walk, X-Train)
• Activity Level (Very Low, Low, Moderate, High, Very High)
• Gender (Male or Female)
2. To choose another item to set up, press START/SPLIT (+) or
HEART RATE (-).
3. Press STOP/RESET/SET to enter the setting process.
4. Press START/SPLIT (+) or HEART RATE (-) to cycle through the
choices, and press MODE (NEXT) to advance to the next setting
field.
change alarm time and how often you would like the alarm to
sound (ONCE, DAILY, WKDAY, WKEND, or a particular day of the
week).
5. Press STOP/RESET/SET (DONE) to confirm and exit.
6. Press START/SPLIT to turn any Alarm ON or OFF. If the Alarm is
activated, the frequency of the alarm will show in the bottom line
of the display.
Tips:
• When the Alarm is on, x appears in Time display.
• When the Alarm reaches its set time the INDIGLO® night-light
and the alarm icon flash, and the alert sounds. Press any button
to silence.
• If no button is pressed, the alert will cease after 20 seconds and
a backup alarm will activate after 5 minutes.
NoTE: It is not necessary for a heart rate value to appear on the
display during this test.
5. When you are finished, press STOP/RESET/SET (DONE) to confirm
the User Info setting.
6. Repeat Steps 2-5 as necessary to complete all of your custom
settings.
CarE & MaINTENaNCE
Digital heart rate Monitor
• To avoid build up of materials that can interfere with the Digital
Heart Rate Monitor’s ability to receive a valid pulse, rinse the
Digital Heart Rate Sensor with fresh water.
• Do not clean the Digital Heart Rate Monitor sensor or chest
strap with abrasive or corrosive materials. Abrasive cleaning
agents may scratch the plastic parts and corrode the electronic
circuit.
alarM
Up to three alarms may be set to remind you of upcoming events.
You can customize by day according to your needs.
1. Press MODE until ALARM appears.
2. Press HEART RATE to select Alarm 1, 2, or 3.
3. Press STOP/RESET/SET to set selected alarm.
4. Press START/SPLIT (+) or HEART RATE (-) and MODE (NEXT) to
Download from Www.Somanuals.com. All Manuals Search And Download.
28
27
• Do not subject the Digital Heart Rate Monitor to excessive force,
shock, dust, temperature, or humidity. Such treatment may
result in malfunction, a shorter electronic life span, damaged
batteries, or distorted parts.
• Do not tamper with the Digital Heart Rate Monitor’s internal
components. Doing so will terminate the Monitor’s warranty
and may cause damage.
1. Open the Sensor battery lid with a coin, turning the coin counter-
clockwise.
2. Replace the battery with a new CR2032, 3V lithium battery with
(+) facing you, taking care not to touch the two contacts and
discharge the battery.
3. When you have finished inserting the battery, press the reset
button (located in the lower left corner) with a toothpick or
straightened paper clip and close the lid with a coin -- screwing
in a clockwise direction.
• The Digital Heart Rate Monitor contains no user-serviceable
parts, except batteries.
To test the new battery after you have inserted it:
1. Move away from any possible sources of electrical or radio
interference.
2. Wet the Digital Heart Rate Sensor pads and securely fasten the
chest strap below your sternum.
3. While wearing the watch, press the HEART RATE button. A set of
three dashes (- - -) and the flashing heart rate icon will appear on
the display.
Digital heart rate Sensor battery
If your heart rate readings become erratic or stop, you may need
to replace the battery on your Digital Heart Rate Sensor. You can
change the battery yourself without any special tools.
This product uses a CR2032 lithium battery for the Digital Heart Rate
Sensor. To change the battery:
BATTERY
4. If you do not see a flashing heart icon on your watch, reinstall the
sensor battery.
NoTE: It is not necessary for a heart rate value to appear on the
display during this test.
OPEN
BATTERY
Download from Www.Somanuals.com. All Manuals Search And Download.
30
29
Digital heart rate Sensor
• Your 30 Meter Water Resistant Digital Heart Rate Sensor can
withstand water pressure to 60 p.s.i. (equals immersion to
98 feet or 30 meters below sea level).
Watch battery
When the battery of the watch is running low, the display or
INDIGLO® night-light will dim. This watch uses a CR2025 lithium
battery.
WarNING: ThIS UNIT WIll NoT TraNSMIT yoUr hEarT raTE
To avoid the possibility of permanently damaging the watch, TIMEX
STRONGLY RECOMMENDS TAKING YOUR HEART RATE MONITOR
WATCH TO A LOCAL RETAILER OR JEWELER TO HAVE THE BATTERY
REPLACED.
WhEN oPEraTED IN or UNDEr WaTEr.
WarraNTy & SErvICE
INDIGlo® NIGhT-lIGhT
Timex International Warranty (U.S. limited Warranty)
Press the INDIGLO® button to activate the night-light. This electrolu-
minescent technology illuminates the watch display at night and in
low light conditions.
Your Timex® Digital Heart Rate Monitor is warranted against manufacturing defects by Timex for
a period of ONE YEAR from the original purchase date. Timex Group USA, Inc and its worldwide
affiliates will honor this International Warranty.
Please note that Timex may, at its option, repair your Heart Rate Monitor by installing new or
thoroughly reconditioned and inspected components or replace it with an identical or similar
model.
WaTEr rESISTaNCE
Watch
• Your 100 Meter Water Resistant watch withstands water
pressure to 200 p.s.i. (equals immersion to 328 feet or
100 meters below sea level).
• The watch is only water-resistant as long as the lens,
pushbuttons, and case remain intact.
• Timex recommends rinsing your watch with fresh water after
exposure to salt water.
IMPORTANT: PLEASE NOTE THAT THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGES TO
YOUR HEART RATE MONITOR:
1. after the warranty period expires;
2. if the Heart Rate Monitor was not originally purchased from an authorized Timex retailer;
3. from repair services not performed by Timex;
4. from accidents, tampering or abuse; and
5. lens or crystal, strap or band, Heart Rate Monitor case, attachments or battery. Timex may
charge you for replacing any of these parts.
THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.
WarNING: To MaINTaIN WaTEr-rESISTaNCE, Do NoT PrESS
aNy bUTToNS UNDEr WaTEr.
TIMEX IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
countries and states do not allow limitations on implied warranties and do not allow exclusions
or limitations on damages, so these limitations may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from country to country and
state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
31
ThIS IS yoUr rEPaIr CoUPoN. KEEP IT IN a SaFE PlaCE.
To obtain warranty service, please return your Heart Rate Monitor to Timex, one of its affiliates
or the Timex retailer where the Heart Rate Monitor was purchased, together with a completed
original Repair Coupon or, in the U.S. and Canada only, the completed original Repair Coupon
or a written statement identifying your name, address, telephone number and date and place
of purchase. Please include the following with your Heart Rate Monitor to cover postage and
handling (this is not a repair charge): a US $8.00 check or money order in the U.S.; a CAN $7.00
cheque or money order in Canada; and a UK£2.50 cheque or money order in the U.K. In other
countries, Timex will charge you for postage and handling. NEVER INCLUDE ANY ARTICLE OF
PERSONAL VALUE IN YOUR SHIPMENT.
TIMEX INTErNaTIoNal WarraNTy rEPaIr CoUPoN
Original Purchase Date: ______________________________________________
(attach a copy of sales receipt, if available)
Purchased By:_______________________________________________________
(name, address, telephone number)
For the U.S., please call 1-800-328-2677 for additional warranty information. For Canada, call
1-800-263-0981. For Brazil, call +55 (11) 5572 9733. For Mexico, call 01-800-01-060-00. For
Central America, the Caribbean, Bermuda and the Bahamas, call (501) 370-5775 (U.S.). For Asia,
call 852-2815-0091. For the U.K., call 44 208 687 9620. For Portugal, call 351 212 946 017. For
France, call 33 3 81 63 42 00. For Germany, call 49 7 231 494140. For the Middle East and Africa,
call 971-4-310850. For other areas, please contact your local Timex retailer or Timex distributor
for warranty information. In Canada, the U.S. and in certain other locations, participating Timex
retailers can provide you with a postage-paid, pre-addressed Heart Rate Monitor Repair Mailer
for your convenience in obtaining factory service.
Place of Purchase:___________________________________________________
(name and address)
Reason for Return ___________________________________________________
____________________________________________________________________
____________________________________________________________________
Service
If your Timex® Digital Heart Rate Monitor should ever need servicing, send it to Timex as set
forth in the Timex International Warranty or addressed to:
HOTLINE WATCH SERVICE, P.O. Box 2740, Little Rock, AR 72203
For service questions, call 1-800-328-2677.
For your convenience in obtaining factory service, participating Timex retailers can provide you
with a pre-addressed Heart Rate Monitor Repair Mailer.
See the Timex International Warranty for specific instructions on the care and service of your
Timex® Digital Heart Rate Monitor.
Should you need a replacement strap or band, call 1-800-328-2677.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
33
FCC NoTICE (U.S.) / IC NoTICE (CaNaDa):
DEClaraTIoN oF CoNForMITy
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Manufacturers Name:
Timex Group USA, Inc.
555 Christian Road
Manufacturers address:
Middlebury, CT 06762
United States of America
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
declares that the product:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Product Name:
TAP Digital Heart Rate Monitor
M103 & M640
Model Numbers:
conforms to the following specifications:
r&TTE: 1999/05/EC
Standards:
Model 103
CENELEC EN 55022:2006+A1:2007
CFR47 FCC Part 15 Subpart B:2011
VCCI V-3/2010.04
— Reorient or relocate the receiving antenna.
IC RSS-310 Issue 3 December 2010
IC RSS-Gen Issue 3 December 2010
IC ICES-003 Issue 4 February 2004
AS/NZS Cispr 22:2009
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
lvD: 2006/95/EC
Standards:
Model 103
CENELEC EN 60950-1
— Consult the dealer or an experienced radio TV technician for help.
This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe [B] est conforme à la norme NMB-003 du Canada
lvD: 73/23/EEC
Safety:
Model 640
IEC 60950
EMC: 89/336/EEC
Emissions:
Model 640
EN300-683
Radiated Emission 30 MHz to 1000 MHz E-Field (Electric).
Ref.EN55022
Immunity:
EN300-683
Radiated Immunity 80 MHz to 1000 MHz. Ref. EN61000-4-3
ESD Electrostatic discharge. Ref. EN61000-4-2
Radiated Immunity 900 MHz. Ref. ENV50204
Download from Www.Somanuals.com. All Manuals Search And Download.
36
35
Supplemental Information: The product herewith complies with the requirements of the Radio
& Telecommunications Terminal Equipment Directive 1999/05/EC, the Low Voltage Direc-
tive 2006/95/EC, 73/23/EEC, EMC Directive 89/336/EEC and carries the CE and 7 marking
accordingly.
Agent:
David Wimer
Quality Assurance Project Engineer
Date: 27 July, 2011, Middlebury, Connecticut, U.S.A.
©2011 Timex Group USA, Inc. TIMEX, INDIGLO, TAPSCREEN and NIGHT-MODE are
registered trademarks of Timex Group B.V. and its subsidiaries. IRONMAN and
M-DOT are registered trademarks of World Triathlon Corporation. Used here by
permission.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
37
|