Model T331
Bluetooth Dual Alarm
AM/FM Clock Radio
BT
B
T
For additional information, online registration,
and exclusive special offers visit our website:
For questions or comments regarding this or other products,
please call our toll-free number 1-800-888-4491.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER CET
APPAREIL SOUS LA PLUIE ET L’HUMIDITÉ
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user of the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute
a risk electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The symbols above are located at the bottom of the cabinet.
CAUTION: To prevent electric shock, do not use this (Polarized) plug with an extension cord receptacle, or other
outlets unless the blades can be fully inserted to prevent blade exposure.
ATTENTION: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un prolongateur. Une
prise de courant, ou une autre sortie de courant sauf si les lames peuvent étre insérées à fond sans en laisser
aucune partie à decouvert.
A Consumer Guide to Product Safety
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
apparatus.
L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu'un vase, ne doit
être placé sur l'objet.
• Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus
from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté
de l'alimentation d'entrée, la prise doit être débranchée du secteur.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au feu ou autres choses de semblable.
• Caution marking is located at the bottom of apparatus.
Les précautions d'emploi sont inscrites en bas de l'appareil.
• The marking information is located at the bottom of apparatus.
Les marquages sont inscrits en bas de l'appareil.
Download from Www.Somanuals.com. All Manuals Search And Download.
A Consumer Guide to Product Safety
This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical shock or fire
hazards.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Water and Moisture - Do not use this apparatus near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming
pool or in a wet basement.
6. Ventilation - Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. For example, it
should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. Heat - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
8. Power Sources - The unit should be connected to a power supply only of the type described in the operating instructions or as marked
on the appliance.
9. Grounding or Polarization - Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Power-Cord Protection - Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus. It is always best to have a clear area from where the cord exits the unit to where it is
plugged into an AC outlet.
11. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry
cloth.
12. Non-Use Periods – The power cord of the unit should be unplugged from the outlet when it is to be left unused for a long period of
time.
13. Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through
openings.
14. Attachments - Only use attachments/accessories specified by the manufacturer.
15. Lightning - Unplug this apparatus during lightning storms or when unused for long periods of time.
16. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
17. Damage Require Service - Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
18. Servicing - The user should not attempt to service the unit beyond that described in the user’s operating instructions. All other servicing
should be referred to qualified service personnel.
19. Safety Check - Upon completion of any service or repairs to this product, ask the service telchnician to perform safety checks to
determine that the product is in proper operating condition.
20. Antenna - Do not connect to an external antenna.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Preparation for Use ............................................................................................................................................................................. 1
Controls And Indicators .................................................................................................................................................................. 2-3
Operating Instructions .................................................................................................................................................................... 4-8
Care and Maintenance ....................................................................................................................................................................... 8
Limited 90-day Warranty Information............................................................................................................................................... 9
FCC/IC Information
FCC ID: EMOT331
IC: 986B-T331
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs
peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
QDID: B020863
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation For Use
Battery Back-up System
Your new Timex Bluetooth Clock Radio has a battery back up system that will maintain the time and alarm settings during a temporary
power interruption. The battery back up system requires two “AAA” batteries (not included). We recommend you use a well-known brand
of alkaline batteries for longest life and best performance. If you experience a power failure while batteries are installed, the display will turn
‘off’ but the clock will continue to run and maintain your alarm settings. When power is restored the display will turn ‘on’ again and the time
and alarm settings will be correct.
Installing The Batteries
• Press on the battery door locking tab to open and remove the battery
Press
door.
• Install two “AAA” batteries in the battery compartment. Observe the
polarity(+/- ) markings in the battery compartment to make sure the
batteries are inserted correctly.
• Close the battery door.
Protect Your Furniture
This clock radio has two silicon rubber feet on the bottom cabinet to prevent the radio from sliding and to avoid scratching your furniture.
These rubber feet are designed not to leave marks on furniture. However the use of certain furniture polishes could cause the rubber feet
to soften and stick to your furniture. If this radio is going to be placed on fine, highly polished wooden furniture, you should place small
self-adhesive felt pads on the rubber feet, or place a cloth between the radio and the surface of the furniture.
AC Power Plug
This model is equipped with a polarized AC power plug that has one wide blade and one narrow blade. This plug will only fit in a polarized
AC outlet. This is a safety feature designed to prevent electric shock. Do not try to defeat this safety feature by filing the wider blade or
using an adapter to make this plug fit in a non-polarized outlet. If this plug will not fit in your outlet you should have your outlet changed
by a qualified electrician.
FM wire antenna
AUX IN
AC Outlet
AC Plug
FM Antenna
Unwind the FM wire antenna, located on the back cabinet, and extend it to its full length for best FM reception.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Controls and Indicators
Time and Radio
Frequency Display
Front Panel
PM Indicator
Bluetooth Mode Indicator
Alarm 1 Buzzer/
Radio/
Bluetooth Indicators
Alarm 2 Buzzer/
Radio/
Bluetooth Indicators
BT
BT
Low Battery Indicator
Top Panel
Speaker
Minute/
(TuningUp)Button
ALM 2/ Volume Button
–
Hour/
(TuningDown)Button
ALM 1/ Volume+Button
Clock (Set)/ Preset/
(Bluetooth) Pair Button
Power/Mode/Alarm Reset Button
Snooze/Sleep/
Dimmer Button
Controls and Their Functions
CLOCK / PRESET / PAIR Button – When the unit is OFF press & hold to enter the clock setting mode. When the FM/AM radio is active
press & hold to store or recall a preset memory stations. When the BT mode is selected press & hold to activate BT pairing mode. When
the BT music is played press to PAUSE / PLAY the sound.
HOUR / (Tune Down) Button – When the FM/AM radio is active press to tune the radio to the lower frequency. When the unit is OFF
press to adjust hours of the time or hours of the alarm adjustment.
MIN /
(Tune Up) Button – When the FM/AM radio is active press to tune the radio to the higher frequency. When the unit is OFF press
to adjust minutes of the time or minutes of the alarm adjustment.
ALM. 2 (VOL - ) Button – When unit is OFF press & hold to enter the Alarm 2 setting mode. When playing music, press this button to
lower the volume level.
ALM. 1 (VOL +) Button – When unit is OFF press & hold to enter the Alarm 1 setting mode. When playing music press this button to raise
the volume level.
POWER/MODE/ALM RESET Button – Press & hold to turn the unit OFF. Pressing this button cycles through the following modes: FM
radio> AM radio > Aux > BT mode. When Alarm 1 or Alarm 2 is sounding press to stop alarm and reset it for following day. When the unit
is OFF, press this button to activate the unit at last selected mode.
SNOOZE/SLEEP/DIMMER Button – When Alarm 1 or 2 is sounding press to stop alarm temporary for 9 min. After 9 minutes the alarm
turns on again. When the unit is playing music (FM, AM Radio, BT or Aux), press this button to activate SLEEP time. You can select
between 90 min and 10 min SLEEP timer, before unit auto shuts OFF. Press / hold this button for 2 sec to adjust HIGH or LOW display
brightness.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
Back Panel
FM Antenna Wire
AC Power Cord
Auxiliary Input Jack
Bottom Cabinet
FCC ID: EMOT331
IC: 986B-T331
Model: T331
Service No.: T331-A-A
Battery Back Up
Compartment
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Unwind the FM wire antenna and extend it to its full length.
Unwind the AC power cord completely and insert the plug into a 120V/60Hz AC outlet. Use an outlet that is always ‘live’.
Do not use an outlet that is controlled by a wall switch.
When the clock is connected to the AC outlet for the first time the display will turn on and begin flashing “12:00 (PM)”. If
you have not installed the back up batteries the Low Battery indicator will also appear in the display.
Setting The Current Time
NOTE: The time can only be set when the clock radio is in the OFF mode. If the radio is playing, press and hold the
POWER/MODE/ALM RESET button until the display briefly shows ‘OFF’ and then reverts to the time.
1. If the display is flashing, press the HOUR / button to advance the display to the correct hour. If the display is not
flashing press and hold the CLOCK button until the display begins to flash, then press the HOUR / button to advance
the display to the correct hour. Observe the PM indicator to confirm that you have set the hour correctly. If the PM
indicator is ‘On’ the hour on the display is PM. If the PM indicator does not appear the hour on the display is AM.
2. Press the MIN / button to advance the display to the correct minute.
3. When the correct time is flashing on the display press the CLOCK / PRESET / PAIR button once more. The display
stops flashing and the clock begins to run.
Setting The Alarm Time
This Timex clock radio has dual alarms that can be set and used independently. The initial default alarm settings are 6:00
AM for Alarm 1 and 7:00 AM for Alarm 2. The procedure for setting both alarms is the same.
NOTE: The alarm times can only be adjusted when the clock radio is in the OFF mode. If the radio is playing, press and
hold the POWER/MODE/ALM RESET button until the display briefly shows ‘OFF’ and then reverts to the time.
1. Press and hold the ALM 1 button until the Alarm 1 time and the Alarm 1 Buzzer indicator begin flashing in the display, then
release the button.
2. Press the HOUR / button to advance the display to the desired wake-up hour. Observe the PM indicator to confirm that
you have set the wake-up hour correctly. If the PM indicator is ‘On’ the wake-up hour on the display is PM. If the PM
indicator does not appear the wake-up hour on the display is AM.
3. Press the MIN / button to advance the display to the correct wake-up minute, and then release the button.
4. Press the ALM 1 button once more to confirm the wake-up time setting or after 10 seconds the display will stop flashing
and the new wake-up time will be entered automatically. The display will return to the correct time of day but the Buzzer
indicator will remain ‘on’ in the display indicating that the Alarm 1 is now set to wake you to the buzzer.
5. Repeatedly pressing the Alarm button will cycle through “wake to” sources; Buzzer > Radio > Bluetooth >OFF. The Buzzer
indicator and the alarm time will display. Press the ALM 1 button once more to select the Radio alarm. The Radio indicator
remains ‘on’ together with the alarm time. Press the ALM 1 button once more to select the Wake to Bluetooth mode. The
BT indicator remains ‘on’ together with the alarm time. Press the ALM 1 button once more to cancel the alarm function.
The alarm indicators disappear and the display returns to the correct time.
6. Follow the same procedure to set the Alarm 2 wake-up time.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
NOTE: You must make the time and alarm time adjustments while the display is flashing. If no adjustments are made for approximately
8 seconds the display will stop flashing and cannot be adjusted. If this occurs you must start the time and alarm setting procedure again
and make sure that you complete the adjustments while the display is flashing.
Radio Operation
POWER/MODE/ALM RESET Button – When the unit is ‘off’, pressing this button will cycle through available modes: FM Radio > AM
Radio > AUX > BT to select the following operating modes:
First Press – FM Radio band. The initial default display is 87.5 mHz.
Second Press – AM Radio band. The initial default display is 520 kHz.
Third Press – AUX (AUH) mode. To listen to an external audio source.
Fourth Press – Bluetooth Mode.
1. Press the POWER/MODE/ALM RESET button to turn the radio ‘on’ and select the FM band. The initial FM frequency display is 87.5
mHz. Press the POWER/MODE/ALM RESET button again to select the AM band. The initial AM frequency display is 520 kHz.
2. After selecting the desired band tune to a radio station by either the automatic or manual tuning method:
• Automatic Tuning – Press and hold the HOUR / or MIN / button until the frequency display begins to move, then release the
button. The tuner will search up or down for the next strong station and stop on that station. Repeat this procedure until the tuner
stops on the desired station. After a few seconds the display will change from the radio frequency back to the correct time.
• Manual Tuning – Repeatedly press the HOUR / or MIN / button until the display shows the frequency of your desired station. Use
the Manual Tuning method to tune to weaker stations that could be bypassed during automatic tuning. After a few seconds the
display will change from the radio frequency back to the correct time.
3. Press the ALM 1 (VOL +) or ALM 2 (VOL -) button to adjust the radio volume level. The display changes to show the volume level
indication (00 to 20) during volume adjustments, then changes back to the radio station frequency, and then the current time.
4. When you are finished listening press and hold the POWER/MODE/ALM RESET button until the display shows OFF, then release the
button. The display will then return to the correct time.
Last Station Memory
The tuner remembers the last FM and AM stations that you were listening to and automatically returns to those stations the next time
you select the FM or AM mode.
Preset Station Memory
The tuner can store up to 10 FM and 10 AM station in memory for easy recall. To store a station in memory:
1. Tune to the first station that you wish to store using either the Automatic or Manual Tuning methods described above.
2. When the display is showing the frequency of the desired station, press and hold the CLOCK / PRESET / PAIR button until the “P
01” indicator begins flashing in the display.
3. Press the CLOCK / PRESET / PAIR button once more to store your station in Preset Memory number 1. The preset indicator will
automatically advance to “P 02”.
4. Repeat steps 1 thru 3 until you have stored up to 10 stations of one band, then change bands and follow the same procedure to
store up to 10 stations of the remaining band.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
To Recall A Preset Station
Tune to the desired band and then press the CLOCK / PRESET / PAIR button to scroll through the 10 preset memories to find your
desired station.
To Change A Preset Station
1. Tune to the new station that you want to store.
2. Press and hold the CLOCK / PRESET / PAIR button until the Preset Number indicator begins flashing.
3. Press the HOUR / or MIN / button until the preset number that you want to change is flashing in the display.
4. Press the CLOCK / PRESET / PAIR button once more. The new station is entered into the preset memory number that you selected
and the previous station is deleted.
Bluetooth Feature
This Timex clock radio includes a Bluetooth receiver that allows you to wirelessly stream music to the radio from your Bluetooth enabled
smartphone, tablet or music player from up to 10 meters (approximately 33 feet) away. You may also wake up to the music stored on
your Bluetooth enabled device as long as your device has been properly paired with this Timex clock radio and is within the 10 meter
transmission range. You may also use the Sleep Timer on this Timex clock radio to fall asleep to music from your Bluetooth enabled
device for up to 90 minutes and then the unit will shut off automatically.
Pairing and Playing Your Bluetooth Enabled Device
1. Make sure that your Bluetooth enabled device is turned ‘on’ and placed in the Pairing Mode. The screen on your phone may show
any previously paired devices as well as any new devices that are ‘in-range’ and ‘discoverable’.
2. Press POWER/MODE/ALM RESET button and select the BT mode on your Timex clock radio until the display briefly shows “bt”,
two ‘beeps’ are heard and the Bluetooth indicator begins slowly flashing in the upper right corner of the display. This indicates that your radio
is in Bluetooth mode.
BT
BT
3. Press and hold the CLOCK / PRESET / PAIR button until the Bluetooth indicator begins to flash rapidly. “Timex T331” should appear
on your device’s display along with the words “Not Paired” or similar message. Tap on that message to complete the pairing process.
The screen on your device will now show “Timex T331 Connected” and you will hear a single ‘beep. The Bluetooth indicator stops
flashing and remains ‘On’. This indicates that your device and your clock radio are properly paired and you can begin streaming
music wirelessly from your device to your clock radio.
4. Use the controls on your Bluetooth device to select the music you wish to hear and to control the volume as usual. It may be
necessary to adjust the volume level on your clock radio as well. Press the CLOCK / PRESET / PAIR button to play/pause Bluetooth
music. The music from your Bluetooth device will play through the speaker of the clock radio.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
5. When you are finished listening press and hold the POWER/MODE/ALM RESET button until the display shows “OFF” and then
return to the current time. If necessary turn off your Bluetooth enabled device as well.
Note: If you move your Bluetooth enabled device out of range the signal will be lost and the music will stop playing through your clock
radio. It may continue playing through the speakers of the device.
Auto Linking
Whenever you turn on your radio and select the Bluetooth mode it will automatically search for the previously paired device and try to
re-link with that device. If the device is within the 10 meter operating range it will be re-linked automatically. It will not be necessary to
go through the pairing process again.
Pairing With A Different Device
In order to pair your Timex Clock Radio with a different Bluetooth enabled device while your original device is still within range, you may
need to go to the Bluetooth screen on your phone, select the original device and then select “Forget This Device”, “Disconnect”,
“Cancel” etc to un-pair the original device. Refer to the instruction manual for your specific Bluetooth enabled device.
Alarm Operation
1. Press the ALM 1 or ALM 2 button once to reconfirm the wake-up time settings. Follow the “Setting The Alarm Times” procedure
above to adjust the wake-up times if necessary.
2. Continue pressing the ALM 1 or ALM 2 buttons to select Buzzer, Radio, or Bluetooth as the wake-up source. The appropriate
indicator will remain in the display to confirm your selection. If you selected Radio as the wake-up source the alarm will turn on to the
last station you were listening to before turning the unit off. If you selected Bluetooth as the wake up source, make sure that your
Bluetooth enabled device is within the 10 meter Bluetooth transmission range. When the alarm turns on it will start playing the last
track on your Bluetooth device that you were listening to before shutting the device off.
3. At the selected wake up time, the buzzer, the radio, or your Bluetooth enabled device will turn on. The Radio or the Bluetooth alarms
will start softly and gradually increase in volume to wake you gently. The alarms will continue for one hour and then shut off and reset
for the following day.
4.To stop the alarm sooner, press the ALM 1, ALM 2 or POWER/MODE/ALM RESET button. The alarm stops immediately and resets
itself for the following day.
5. To cancel one or both alarms so that they do not turn on the following day, continue pressing the ALM 1 or ALM 2 buttons until the
Buzzer, Radio or Bluetooth indicators no longer appear in the display.
Snooze/Sleep/Dimmer Button
When the alarm is sounding press the SNOOZE/SLEEP/DIMMER button to stop the alarm temporarily for a few minutes extra sleep.
The alarm will turn on again after 9 minutes. You may repeat the Snooze operation several times within one hour, but after one hour the
alarm will not turn on again and will reset itself for the following day.
When the alarm is not sounding press the SNOOZE/SLEEP/DIMMER button to activate the Sleep timer. If you were listening to the radio
the radio will turn on to the last tuned station and the display will show “90” indicating that the radio will play for 90 minutes before auto
shutoff. If you were listening to Bluetooth you will hear the music from your Bluetooth enabled device. To adjust the amount of sleep
time, continue pressing the SNOOZE/SLEEP/DIMMER button to reduce the amount of time by 10 minutes with each press. When the
Sleep timer counts down to “00” the radio or your Bluetooth device shuts off automatically. To shut the radio or your Bluetooth device
off at any time press and hold the POWER/MODE/ALM RESET button.
You may adjust the radio or Bluetooth volume level during sleep timer operation but remember that the volume level you select for Sleep
timer operation is the same level you will hear when waking to radio or Bluetooth in the morning.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Dimmer (Display Brightness) Control
By default the display brightness is set to the Hi level at our factory. Press and hold the DIMMER button once to reduce the display
brightness to a low level. Press and hold again to return to full brightness.
Auxiliary Input (AUX IN) Jack (on back panel)
You can listen to music from an external source such as an iPod, MP3 player, CD player, etc, through the speaker of your Timex clock
radio. Use a 3.5mm stereo audio cable (not included) to connect the headphone jack of your external source to the AUX IN jack on the
back panel of your Timex clock radio.
Press the POWER/MODE/ALM RESET button on the radio until the display shows “AUH”. Begin playback on your external device.
Adjust the volume level of the clock radio as desired. You may need to adjust the volume level on your external device as well.
When you are finished listening press and hold the POWER/MODE/ALM RESET button to shut the radio ‘Off’. Don’t forget to turn off
your external device as well.
Care and Maintenance
Replacing The Back Up Batteries / Power Failure
Good quality alkaline batteries should last for at least one year under normal conditions. When the back up batteries start to lose power
the Low Battery indicator will appear in the bottom of the display. Leave the clock radio connected to the AC outlet while replacing the
exhausted batteries to avoid having to reset the time, alarm times, and radio preset station memories.
If you experience a power failure and the back up batteries are exhausted, the display will begin flashing when the power is restored. If
you notice the flashing display you should first remove the exhausted batteries, install fresh batteries, and then reset the time, alarm
times, and preset station memories as described in this manual.
Cleaning The Cabinet
If the cabinet becomes dusty wipe with a soft, dry dust cloth. Never spray the cabinet with furniture dusting sprays. If the cabinet
becomes dirty or smudged with fingerprints, wipe it with a soft cloth slightly dampened with a mild soap and water solution. Never use
chemicals or abrasive cleaners. Never allow water or any other liquid to enter the cabinet.
There are no user serviceable parts inside this unit. To avoid the potential for electric shock never open the cabinet yourself. Refer all
service problems to a qualified service technician at a factory authorized service center. Consult your warranty for more details.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 90 Day Warranty Information
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of ninety (90) days from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or
malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service. The product must
include proof of purchase, including date of purchase. An out-of-warranty fee for service will be charged for units that are received
without proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective
batteries are the most common cause of problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-888-4491 for Return Authorization and for the address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. SDI is not responsible for damage
that occurs during shipping to the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty
period. Also include your name and address information, a brief description for why the unit is being returned, and the return
authorization number. No unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory
Service Center address authorized by SDI Customer Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents
be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions
may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.
© 2014 SDI Technologies, Inc. All rights reserved.
or call 1-800-888-4491 Toll Free
9
Download from Www.Somanuals.com. All Manuals Search And Download.
T331-041014-B
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|