106
MODELS SHOWN: SGSX365FS GAS COOKTOP, HDDW36FS CHIMNEY DRAWER HOOD AND MED301JS BUILT-IN OVEN
Download from Www.Somanuals.com. All Manuals Search And Download.
GAS COOKTOPS
FEATURES & BENEFITS
EXTRALOW® BURNERS
A Thermador exclusive, this
setting cycles the burner on
and off to maintain 200 BTU/hr,
perfect for melting chocolate or
heating delicate sauces.
ILLUMINATED CONTROL
PANEL WITH METAL KNOBS
Metal knobs have blue
progressive illumination that
adjusts to indicate whether
the burner is on regular or
ExtraLow settings.
MASTERPIECE® DESIGN
OUR EXCLUSIVE, PATENTED STAR® BURNER
With chiseled edges and a
trapezoid control panel, these
cooktops were designed to
coordinate perfectly with the
entire Masterpiece line of
appliances.
The Star Burner’s unique shape isn’t just for show. The Star delivers
56% more coverage with superior flame spread and a reduced cold
spot for faster and more even heating across any size pan.
35 ports / 16 3/4" perimeter
28 ports / 10 3/4" perimeter
THE MOST POWERFUL
30-INCH GAS COOKTOP
Thermador offers an impressive
30-inch gas cooktop with 5
burners, including a center-
mounted power burner, and
52,000 BTUs of overall heat
output. This gives you the
functionality of a 36-inch
cooktop in a compact kitchen
environment.
The Star Burner’s coverage area allows for more ports and more
flame distribution than a round burner.
The design of the Star Burner offers greater heat coverage,and
a smaller cold spot, making it ideal for any pan size.
STAR-K CERTIFIED
Thermador Gas Cooktops are Star-K certified making
it possible to use them on Holy Days and the Sabbath.
THERMADOR EXCLUSIVE
108
Download from Www.Somanuals.com. All Manuals Search And Download.
GAS COOKTOPS
PLANNING INFORMATION
MODEL OPTIONS
ELECTRICAL AND GAS SPECIFICATIONS
There are two sizes of Thermador Masterpiece®
Gas Cooktops to choose from—30-inch and 36-inch.
30-inch models are available with four Star Burners
or five Star Burners. 36-inch models feature five Star
Burners. Every model is LP convertible by ordering
SNLPKITF. Be sure to reference the correct model
information in this design guide.
Be sure your appliance is properly installed and grounded by a qualified
technician. Installation, electrical and gas connections, and grounding
must comply with all applicable local codes. Thermador Masterpiece Gas
Cooktops are equipped with a 60-inch, 3-wire supply cord.
MODEL
REQUIRED CIRCUIT BREAKER
120V, 60 Hz
SGS304FS
SGS305FS
SGSX305FS
SGS365FS
SGSX365FS
SGSL365KS
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador
Masterpiece Gas Cooktop, be sure to verify the cutout
dimensions and electrical/gas connections. Also,
always consult with the installation manual packed with
the product for complete details before installing.
IMPORTANT: It is required that the cooktop be installed on a grounded,
non-GFCI branch circuit.
Thermador Masterpiece Gas Cooktops may be
installed above a Thermador Single Built-in Oven as
long as there is no contact between the bottom of the
cooktop and the top of the oven.
Thermador Masterpiece Gas Cooktops are shipped by the factory to operate
on natural gas. They must be converted for use with propane. Verify the type
of gas being used at the installation site matches the type of gas used by
the appliance. If the location/job site requires conversion from natural gas to
propane (LP), order SNLPKITF. Field conversion must be done by qualified
service personnel only. Please refer to the LP Conversion Instructions for
further information.
Thermador Masterpiece Gas Cooktops may also
be installed above a Thermador Warming Drawer
to create a convenient cooking center. Refer to the
warming drawer section for additional specifications.
SUPPLY PRESSURE REQUIREMENTS:
Solid surface countertops require a special cutout size
and special installation. For example, heat reflective
tape or rounded corners may be necessary. Contact
the countertop manufacturer for instructions specific to
your countertop.
Natural Gas–7 inches water column (14.9 Millibars) minimum.
LP (Propane Gas)–11 inches water column (27.4 Millibars) minimum.
NOTE: The propane gas tank must be equipped with its own high pressure
regulator in addition to the pressure regulator supplied with this unit.
VENTILATION REQUIREMENTS
We strongly recommend that a Thermador Ventilation
Hood be installed with all Thermador Masterpiece
Gas Cooktops. The hood must be installed according
to instructions furnished with the hood. Refer to the
complete selection of ventilation options, blowers, and
accessories.
Opening for Gas
ELECTRICAL AND
GAS LOCATIONS
The opening for the gas
connection and electrical
Connection and
Electrical Cord
cord is located at the
1”
right rear of rough-in
box as shown below.
When installing the gas cooktop with a downdraft
ventilation system, provide approximately a 10
square inch opening (65 cm ) in the toekick area or
other cabinet area for adequate air inlet. Refer to the
downdraft ventilation section for more details.
C of Cutout
L
2
for 30” models: 12 15/16” (313 mm)
for 36” models: 15 15/16” (389 mm)
Plan the installation
so that the power
WARRANTY
Limited warranty parts and labor (2 year)
connection is accessible
from the front of the
cabinet. Install a manual
gas shut-off valve near
the appliance. It must
be easily accessible in
an emergency.
See page 308 for additional warranty details.
CERTIFIED
1.800.735.4328
|
THERMADOR.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
109
GAS COOKTOPS
30-INCH
SGS304FS
SGS304FS
INNOVATION
- Patented and exclusive Star® Burner provides superior performance
- Unique shape of the Star® Burner offers wider heat coverage resulting
in smaller cold spots
PERFORMANCE
MASTERPIECE
- Powerful 16,000 BTU Burner
SGS304FS
- Continuous grates allow pots and pans to glide smoothly across
the cooktop
- Automatic electronic re-ignition
- Knobs feature a safety “push to turn” system
- Star-K certified
DESIGN
- Chiseled, angular design coordinates with the suite of Thermador
Masterpiece® Collection appliances
- High-grade, quality die cast metal knobs
SPECIFICATIONS
Number of Gas Burners
Product Width
Product Depth
Cutout Width
4
THERMADOR EXCLUSIVE
31"
21 1/4"
28 15/16"
3 13/16"
19 1/8"
1 7/8"
Cutout Height
Cutout Depth
Minimum Distance from
Counter Front
Minimum Distance from
Rear Wall
3"
Left Front Burner
Right Front Burner
Left Rear Burner
Right Rear Burner
10,000 BTU
16,000 BTU
10,000 BTU
8,000 BTU
44,000 BTU
Total Natural Gas Connection
Rating
Total LP Gas Connection Rating
Electrical Supply
39,200 BTU
120V AC, 60 Hz
15 Amp
Required Circuit Breaker
Power Cord
60", 3-Wire
45
Shipping Weight (lbs.)
ACCESSORIES
SWOKRINGF
Wok Ring
SNLPKITF
LP Conversion Kit
110
Download from Www.Somanuals.com. All Manuals Search And Download.
GAS COOKTOPS
30-INCH
SGS304FS
INSTALLATION OPTIONS
30-INCH COOKTOP AND CUTOUT DIMENSIONS
INSTALLATION ABOVE A WALL OVEN OR
WARMING DRAWER
Thermador Masterpiece® Gas Cooktops may be
installed above a Thermador Single Built-in Oven
as long as there is no contact between the bottom
of the cooktop and the top of the oven.
Thermador Masterpiece Gas Cooktops may also
be installed above a Thermador Warming Drawer
to create a convenient cooking center. Refer to the
warming drawer section for additional specifications.
IMPORTANT
We strongly recommend the installation of a
Thermador Ventilation System with this gas cooktop.
Seal the surfaces of the cutout to make them heat
resistant. This prevents the surfaces from expanding
as a result of humidity.
Solid surface countertops require a special cutout size
and special installation. For example, heat reflective
tape or rounded corners may be necessary. Contact
the countertop manufacturer for instructions specific
to your countertop.
NATURAL GAS OR LP
Thermador Masterpiece Gas Cooktops are shipped by
the factory to operate on natural gas. They must be
converted for use with propane. Verify the type of gas
being used at the installation site matches the type
of gas used by the appliance. If the location/job site
requires conversion from natural gas to propane (LP),
order SNLPKITF. Field conversion must be done by
qualified service personnel only. Please refer to the
LP Conversion Instructions for further information.
CABINET REQUIREMENTS
Dimension requirements are for combustible surfaces. When the surface
is protected by a material listed by UL as a Floor Protector and Wall
Shield covered with not less than No. 28 MSG sheet metal 0.015 inch
(0.38 mm) stainless steel, 0.024 inch (0.6 mm) aluminum or copper, it is
considered noncombustible and some dimensions may be reduced. For a
noncombustible surface over the cooktop, the minimum clearance is 24"
(61 cm) rather than 30" (76 cm).
INSTALLATION ABOVE A THERMADOR
BUILT-IN OVEN
Depth from Back Wall
Cabinet 13" (33cm) max.
Hood Depth - 24" (61cm) max.
511/16"
313/16" 43/16"
(144mm)
(97mm) (106mm)
COUNTERTOP
3"(76mm)
63/4"
COOKTOP
Above Counter - 30" (76 cm) min. to
Combustible Surface
(172mm)
Gas
SUMP
SGS(X)30 - 30" (76cm) min.
SGS(X)36 - 36" (91cm) min.
Connection
3/8"
(9mm)
11/8"
(28mm)
281/4"
Centered Over Cooktop
18" (46cm) min.
36"
OVEN
(914mm)
(718mm)
Right Side
Left Side
247/16"
Rear Wall - 1-3/4"(4cm)
(621mm)
12" (30cm) min.
12" (30cm) min.
291/16"
271/16"
(738mm)
(687mm)
WARNING: To reduce the risk of ignition of nearby combustible materials, install the countertop with
a minimum distance of 12" (30 cm) from side walls and 1 3/4" (4 cm) from back wall.)
43/4"
TOE KICK
(121mm)
NOTE: All measurements given have to be precisely followed. If nonstandard cabinets are used, make
sure they are installed with minimum dimensions shown.
Note: Dimensions based on standard countertop height (36" with 43/4" toe kick
including base plate).
Plan the installation of the unit so that the power cord, gas shut-off valve and gas pressure regulator
are accessible from the front of cabinet.
The built-in oven can be installed below the gas cooktop as long as there is no
contact between the bottom of the cooktop and the top of the oven.
Sump applies to 30-inch Wall Ovens only.
1.800.735.4328
|
THERMADOR.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
111
GAS COOKTOPS
30-INCH
SGS305FS / SGSX305FS
SGS305FS
SGSX305FS
INNOVATION
INNOVATION
- Most powerful 30" cooktop in
the luxury segment (amongst
leading manufacturers) with an
overall output of 52,000 BTU
- Patented and exclusive Star®
Burner provides superior
performance
- Most powerful 30" cooktop in
the luxury segment (amongst
leading manufacturers) with an
overall output of 52,000 BTU
- Patented and exclusive Star®
Burner provides superior
performance
MASTERPIECE
MASTERPIECE
SGSX305FS
SGS305FS
- Exclusive 200 BTU ExtraLow®
burners for perfect simmering
PERFORMANCE
- 30" 5 burner gas cooktop
provides functionality of a
36" cooktop in a compact
kitchen environment
- Progressive illuminated control
panel with metal knobs
PERFORMANCE
- Powerful 16,000 BTU
Center Burner
- 30" 5 burner gas cooktop
provides functionality of a 36"
cooktop in a compact kitchen
environment
SPECIFICATIONS
- Continuous grates allow pots
and pans to glide smoothly
across the cooktop
SGS305FS SGSX305FS
Number of Gas Burners
Product Width
Product Depth
Cutout Width
5
- Powerful 16,000 BTU
Center Burner
31"
- Automatic electronic
re-ignition
21 1/4"
28 15/16"
3 13/16"
19 1/8"
1 7/8"
- Continuous grates allow pots
and pans to glide smoothly
across the cooktop
- Knobs feature a safety
“push to turn” system
Cutout Height
- Star-K certified
- Automatic electronic
re-ignition
Cutout Depth
Minimum Distance from
Counter Front
DESIGN
- Knobs feature a safety
“push to turn” system
- Chiseled, angular design
coordinates with the suite
of Thermador Masterpiece®
Collection appliances
Minimum Distance from
Rear Wall
3"
- Single point ignition–only
burner that is being used
is ignited
Left Front Burner
Right Front Burner
Left Rear Burner
Right Rear Burner
Center Burner
8,000 BTU
10,000 BTU
10,000 BTU
8,000 BTU
16,000 BTU
52,000 BTU
- High-grade, quality die cast
metal knobs
- Star-K certified
DESIGN
- Chiseled, angular design
coordinates with the suite
of Thermador Masterpiece®
Collection appliances
THERMADOR EXCLUSIVE
Total Natural Gas
Connection Rating
Total LP Gas Connection Rating
Electrical Supply
45,200 BTU
120V AC, 60 Hz
15 Amp
- High-grade, quality die cast
metal knobs
Required Circuit Breaker
Power Cord
- Sleek control panel features
glass and stainless steel
60", 3-Wire
Shipping Weight (lbs.)
*According to AHAM Standards
44
46
ACCESSORIES
SWOKRINGF
Wok Ring
SGRIDDLEF
Griddle
SNLPKITF
LP Conversion Kit
112
Download from Www.Somanuals.com. All Manuals Search And Download.
GAS COOKTOPS
30-INCH
SGS305FS / SGSX305FS
INSTALLATION OPTIONS
30-INCH COOKTOP AND CUTOUT DIMENSIONS
INSTALLATION ABOVE A WALL OVEN OR
WARMING DRAWER
Thermador Masterpiece® Gas Cooktops may be
installed above a Thermador Single Built-in Oven as
long as there is no contact between the bottom of the
cooktop and the top of the oven.
Thermador Masterpiece Gas Cooktops may also
be installed above a Thermador Warming Drawer
to create a convenient cooking center. Refer to the
warming drawer section for additional specifications.
IMPORTANT
We strongly recommend the installation of a
Thermador Ventilation System with this gas cooktop.
Seal the surfaces of the cutout to make them heat
resistant. This prevents the surfaces from expanding
as a result of humidity.
Solid surface countertops require a special cutout size
and special installation. For example, heat reflective
tape or rounded corners may be necessary. Contact
the countertop manufacturer for instructions specific
to your countertop.
NATURAL GAS OR LP
Thermador Masterpiece Gas Cooktops are shipped by
the factory to operate on natural gas. They must be
converted for use with propane. Verify the type of gas
being used at the installation site matches the type
of gas used by the appliance. If the location/job site
requires conversion from natural gas to propane (LP),
order SNLPKITF. Field conversion must be done by
qualified service personnel only. Please refer to the
LP Conversion Instructions for further information.
CABINET REQUIREMENTS
Dimension requirements are for combustible surfaces. When the surface
is protected by a material listed by UL as a Floor Protector and Wall
Shield covered with not less than No. 28 MSG sheet metal 0.015 inch
(0.38 mm) stainless steel, 0.024 inch (0.6 mm) aluminum or copper, it is
considered noncombustible and some dimensions may be reduced. For a
noncombustible surface over the cooktop, the minimum clearance is 24"
(61 cm) rather than 30" (76 cm).
INSTALLATION ABOVE A THERMADOR
BUILT-IN OVEN
Depth from Back Wall
Cabinet 13" (33cm) max.
Hood Depth - 24" (61cm) max.
511/16"
313/16" 43/16"
(144mm)
(97mm) (106mm)
COUNTERTOP
3"(76mm)
63/4"
Above Counter - 30" (76 cm) min. to
Combustible Surface
COOKTOP
(172mm)
SGS(X)30 - 30" (76cm) min.
SGS(X)36 - 36" (91cm) min.
Gas
Connection
SUMP
3/8"
(9mm)
11/8"
Centered Over Cooktop
18" (46cm) min.
(28mm)
281/4"
36"
OVEN
(914mm)
(718mm)
Right Side
Left Side
Rear Wall - 1-3/4"(4cm)
247/16"
12" (30cm) min.
12" (30cm) min.
(621mm)
291/16"
271/16"
(738mm)
(687mm)
WARNING: To reduce the risk of ignition of nearby combustible materials, install the countertop with
a minimum distance of 12" (30 cm) from side walls and 1 3/4" (4 cm) from back wall.)
43/4"
TOE KICK
NOTE: All measurements given have to be precisely followed. If nonstandard cabinets are used,
make sure they are installed with minimum dimensions shown.
(121mm)
Note: Dimensions based on standard countertop height (36" with 43/4" toe kick
including base plate).
Plan the installation of the unit so that the power cord, gas shut-off valve and gas pressure regulator
are accessible from the front of cabinet.
The built-in oven can be installed below the gas cooktop as long as there is no
contact between the bottom of the cooktop and the top of the oven.
Sump applies to 30-inch Wall Ovens only.
1.800.735.4328
|
THERMADOR.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
113
GAS COOKTOPS
36-INCH
SGS365FS / SGSX365FS / SGSL365KS
SGS365FS
SGSX365FS /
SGSL365KS
INNOVATION
- Patented and exclusive Star®
Burner provides superior
performance
INNOVATION
- Patented and exclusive
Star® Burner provides
superior performance
- 200 BTU ExtraLow® burners
for perfect simmering
(SGSX365FS model)
PERFORMANCE
MASTERPIECE
MASTERPIECE
SGSX365FS
- Powerful 16,000 BTU
Center Burner
SGS365FS
- Continuous grates allow pots
and pans to glide smoothly
across the cooktop
- Progressive illuminated control
panel with metal knobs
PERFORMANCE
- Automatic electronic
re-ignition
- Powerful 18,000 BTU center-
mounted burner
- Knobs feature a safety
“push to turn” system
- Continuous grates allow pots
and pans to glide smoothly
across the cooktop
MASTERPIECE
SGSL365KS*
- Star-K certified
DESIGN
- Automatic electronic
re-ignition
*Product available April 2012.
- Chiseled, angular design
coordinates with the suite
of Thermador Masterpiece®
Collection appliances
- Knobs feature a safety
“push to turn” system
SPECIFICATIONS
- Single point ignition system
(SGSX365FS model)
- High-grade, quality die cast
metal knobs
SGS365FS SGSX365FS
SGSL365KS
- Star-K certified
Number of Gas Burners
Product Width
Product Depth
Cutout Width
5
DESIGN
THERMADOR EXCLUSIVE
37"
- Chiseled, angular design
coordinates with the suite
of Thermador Masterpiece®
Collection appliances
21 1/4"
34 15/16"
3 13/16"
19 1/8"
1 7/8"
Cutout Height
Cutout Depth
- High-grade, quality die cast
metal knobs
Minimum Distance from
Counter Front
- Sleek control panel features
glass and stainless steel
Minimum Distance from
Rear Wall
3"
Left Front Burner
Right Front Burner
Left Rear Burner
Right Rear Burner
Center Burner
9,100 BTU
12,000 BTU
12,000 BTU
9,100 BTU
16,000 BTU 18,000 BTU
Total Natural Gas
Connection Rating
58,200 BTU
60,200
Total LP Gas Connection Rating
Electrical Supply
45,200 BTU
120V AC, 60 Hz
15 Amp
Required Circuit Breaker
Power Cord
60", 3-Wire
Shipping Weight (lbs.)
*According to AHAM Standards
51
53
ACCESSORIES
SWOKRINGF
Wok Ring
SGRIDDLEF
Griddle
SNLPKITF
LP Conversion Kit
114
Download from Www.Somanuals.com. All Manuals Search And Download.
GAs cooktops
36-iNcH
sGs365Fs / sGsX365Fs / sGsl365ks
iNstAllAtioN optioNs
36-iNcH cooktop AND cUtoUt DiMENsioNs
iNstAllAtioN ABoVE A WAll oVEN or
WArMiNG DrAWEr
thermador Masterpiece® gas Cooktops may be
installed above a thermador Single Built-in Oven as
long as there is no contact between the bottom of the
cooktop and the top of the oven.
thermador Masterpiece gas Cooktops may also
be installed above a thermador Warming Drawer
to create a convenient cooking center. Refer to the
warming drawer section for additional specifications.
iMportANt
We strongly recommend the installation of a
thermador Ventilation System with this gas cooktop.
Seal the surfaces of the cutout to make them heat
resistant. this prevents the surfaces from expanding
as a result of humidity.
Solid surface countertops require a special cutout size
and special installation. For example, heat reflective
tape or rounded corners may be necessary. Contact
the countertop manufacturer for instructions specific
to your countertop.
NAtUrAl GAs or lp
thermador Masterpiece gas Cooktops are shipped by
the factory to operate on natural gas. they must be
converted for use with propane. Verify the type of gas
being used at the installation site matches the type
of gas used by the appliance. If the location/job site
requires conversion from natural gas to propane (Lp),
order SNLpkItF. Field conversion must be done by
qualified service personnel only. please refer to the
Lp Conversion Instructions for further information.
cABiNEt rEQUirEMENts
Dimension requirements are for combustible surfaces. When the surface
is protected by a material listed by UL as a Floor protector and Wall
Shield covered with not less than No. 28 MSg sheet metal 0.015 inch
(0.38 mm) stainless steel, 0.024 inch (0.6 mm) aluminum or copper, it is
considered noncombustible and some dimensions may be reduced. For a
noncombustible surface over the cooktop, the minimum clearance is 24"
(61 cm) rather than 30" (76 cm).
Depth from Back Wall
Cabinet 13" (33cm) max.
Hood Depth - 24" (61cm) max.
iNstAllAtioN ABoVE A tHErMADor
BUilt-iN oVEN
511/16"
313/16" 43/16"
(144mm)
(97mm) (106mm)
COUNTERTOP
Above Counter - 30" (76 cm) min. to
Combustible Surface
3"(76mm)
63/4"
COOKTOP
(172mm)
SGS(X)30 - 30" (76cm) min.
SGS(X)36 - 36" (91cm) min.
Gas
Connection
SUMP
3/8"
(9mm)
Centered Over Cooktop
18" (46cm) min.
11/8"
(28mm)
281/4"
Right Side
Left Side
36"
OVEN
Rear Wall - 1-3/4"(4cm)
(914mm)
(718mm)
12" (30cm) min.
12" (30cm) min.
247/16"
(621mm)
291/16"
271/16"
(738mm)
(687mm)
WArNiNG: To reduce the risk of ignition of nearby combustible materials, install the countertop with
a minimum distance of 12" (30 cm) from side walls and 1 3/4" (4 cm) from back wall.)
43/4"
NotE: All measurements given have to be precisely followed. If nonstandard cabinets are used, make
sure they are installed with minimum dimensions shown.
TOE KICK
(121mm)
Note: Dimensions based on standard countertop height (36" with 43/4" toe kick
including base plate).
Plan the installation of the unit so that the power cord, gas shut-off valve and gas pressure regulator are
accessible from the front of cabinet.
The built-in oven can be installed below the gas cooktop as long as there is no
contact between the bottom of the cooktop and the top of the oven.
Sump applies to 30-inch Wall Ovens only.
1.800.735.4328
|
tHERMADOR.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
115
|