Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable
protection against harmful Nterference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television (which can be determined by
turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following
measures:
!
!
!
!
Reorient orrelocatethereceivingantenna.
Increasetheseparationbetweentheequipment andreceiver.
Connect theequipment intoanoutlet onacircuit different fromthat towhichthereceiverisconnected.
Consult thedealeroranexperiencedradio/ TVtechnicianforhelp.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Useadampclothforcleaningtheexterioronly. DoNOT attempt tocleantheinside.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen
sink, orlaundrytub; inawet basement, ornearaswimmingpool, andthelike.
8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer's instructions, and should use a mounting accessory recommended by
the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart Combination to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided.
11. Power Sources - This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instruction.
12. Grounding or Polarization - This product may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
Alternate Warnings - This product may be equipped with a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat
thesafetypurposeof thegrounding-typeplug.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
13. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14. Protective Attachment Plug - The product is equipped with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has used a replacement plug specified by
themanufacturerthat hasthesameoverloadprotectionastheoriginalplug.
15. OutdoorAntennaGrounding -If anoutsideantennais connected
ANTENNA
LEAD IN
WIRE
tothereceiver, besuretheantennasystemisgroundedsoasto
providesomeprotectionagainst voltagesurgesandbuilt-upstatic
GROUND
CLAMP
charges. Article810of theNationalElectricalCode, ANSI/NFPA70,
providesinformationwithregardtopropergroundingof themast
andsupportingstructure, groundingof thelead-inwiretoan
antenna-dischargeunit, sizeof groundingconductors, locationof
antenna-dischargeunit, connectiontogroundingelectrodes, and
requirementsforthegroundingElectrode. Seefigure:
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC-NATIONAL ELECTRICAL CODE
S2898A
16. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges.
17. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
withthemmight befatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
19. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of
any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerousvoltageorotherhazards. Referallservicingtoqualifiedservicepersonnel.
21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a)
b)
c)
d)
When the power-supply cord or plug is damaged,
If liquid has been spilled, or objects have fallen into the product,
If the product has been exposed to rain or water,
If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
itsnormaloperation.
e)
f)
If theproduct hasbeendroppedordamagedinanyway, and
Whentheproduct exhibitsadistinct changeinperformance-thisindicatesaneedforservice.
22. Replacement Parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
23. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform
safetycheckstodeterminethat theproduct isinproperoperatingcondition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the
manufacturer.
25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Your Pedestal CDG Karaoke System will provide you with fun and entertainment. It can let you
be the “star” as you sing along with your favorite recordings and hear your voice with the music
throughthesystem’sspeaker.
This karaoke center is compact and designed to include many features, yet it is easy to use.
After just a few simple instructions, you will become an expert. Before you attempt use your unit,
please read this manual thoroughly to familiarize yourself with all the features available and the
sections of the manual that describe their operation. Next, go to the section for the specific
operation you wish to perform.
For your easy reference, listed here are some of the main features of this karaoke center:
Lyrics on TV screen- displays the lyrics with the tempo of music when playing CD+G discs.
Auto Voice Control (A.V.C.) - lets you replace the original singer's voice with your own voice
when any prerecorded, multiplex disc is played. To activate, just rotate mic volume to a
comfortable listening level, and Auto Voice Control for the best balance between playback and
microphone levels.
Balance Control - lets you adjust the balance between the prerecorded original singer's voice
and the music if you use a multiplex karaoke disc.
Echo Control- lets you add an echo to enrich your voice for a concert hall effect.
Master Volume Control- lets you turn the volume control clockwise or counter - clockwise until
desiredvolumelevelisobtained.
- lift up camera lens to display your image on the Singing Machine’s monitor or TV.
Built - In Speaker- lets you share the music with your family or friends.
Auxiliary Output Jacks - lets you connect another audio output component, such as an
equalizer/booster or a PAsystem.
Headphone Jack- lets you connect the headphones instead of using the built-in speaker.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
STEP 1
1. Join the speaker (middle) into the stand
(bottom) according to the installation
illustration.
1
2
STEP 2
2. Tighten a self tapping screw at the bottom of
the speaker (middle).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
STEP 3
3. Join the control panel (top) into the speaker
(middle) according to the installation
illustration.
B
B
A
A
2
1
A
B
Following the labels (A toA & B to B) to plug the
connectors.
STEP 4
4. Tighten a self tapping screw at the control
panel (top).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
See control locations as indicated on the next few pages.
FRONT VIEW
WIRELESS
MICROPHONE
REAR VIEW
SIDE VIEW
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
1
2
3
20
21
22
23
24
25
26
27
28
29
4
5
6
7
8
9
30
10
11
12
13
14
15
31
32
33
34
35
16
17
18
19
36
FRONT VIEW
1. Camera Lens Open
13. Monitor
14. BALANCE Control
25. RANDOM Button
26. SKIP Button
Button
2. Adjustable Camera Lens 15. MIC Holder
27. SKIP Button
3. ON/OFF Button
4. ON/OFF LED
16. ECHO Control
17. MIC VOLUME Control
18. MIC 1 Jack
28. OPEN/CLOSE Point
29. PLAY/PAUSE Button
30. STOP Button
31. TUNING Knob
32. CDG LED
33. LED Display
34. MIC Holder
35. AUTO VOICE CONTROL
36. MIC 2 Jack
5. Monitor Selector
6. Video Out Selector
7. BAND Selector
8. PROGRAM LED
9. Function Selector
10. REPEAT LED
11. Dial Pointer
19. HEADPHONE Jack
20. Model Number
21. CD Door
22. PLAY/PAUSE LED
23. PROGRAM Button
24. REPEAT Button
12. MASTER VOLUME
Control
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
37
38
39
REAR VIEW
37. BRIGHTNESS Control
39. VERTICAL HOLD Control
38. CONTRAST Control
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
44
40
41
42
43
45
46
47
SIDE VIEW
40. VIDEO IN Jack
44. Speaker
41. AUX INPUT Jack (R)
42. AUX OUTPUT Jack (L)
43. AC Power Cord Jack
45. AUX INPUT Jack (L)
46. VIDEO OUT Jack
47. AUX OUTPUT (R)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
51
52
48
49
50
WIRELESS MICROPHONE
48. ON Position
51. LED Indicator
49. OFF Position
52. STANDBY Position
50. Battery Compartment
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTING POWER
You can power the system from a standardAC outlet by using the supplied power cord.
CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one
way. If the plug does not fit properly, turn it over and try again. Do not force it.
CONNECTING TO YOUR HEADPHONE
A headphone jack is provided for using headphones instead of the built-in speaker.
(Headphones are sold separately.)
CONNECTING TO YOUR TV
The Singing Machine provides a patch cord to give you the option of connecting your unit to an
external audio/sound system and video device. The patch cord has three RCA jacks at each
end; the White and Red are for left and right audio connections and the yellow is for connecting
thevideo.
Make sure that you have a CDG disc in the Singing Machine and playing when you are making
this connection. You will know you have the proper settings on your TV or VCR as soon as you
seetheSingingMachinelogoorlyricsonthescreen!
VIDEO CONNECTION
PleasefollowthestepsbelowtodisplayCDG lyricsontheTVscreen:
(1) Locatethemulticoloredpatchcords.
(2) Connect videocable(yellow)totheVideoOut of thesideof theSingingMachine.
(3) Connect the other end of the Video Cable (yellow) to the Video Input on your TV or
VCR.
SIDE VIEW OF
SINGING MACHINE
REAR VIEW OF TV
R
L
VIDEO IN
AUDIO IN
VIDEO OUTPUT
VIDEO INPUT
(YELLOW JACK) (YELLOW JACK)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
If your television or VCR does not have the required Video Input, you will need an RF Modulator
(Radio Frequency Modulator), which connects through your TV Antenna or cable line and
serves as Video Input.
An RF Modulator can be purchased at almost any consumer electronics retailer. If you are
connecting the video from the Singing Machine to either a television or a VCR video input jack,
you must specify the source the TV or VCR is to display.Your TV or VCR user guide can tell you
how to display the video signal from the ‘Video In’ jack.
If you don’t have the manual for your TV or VCR, we suggest calling the TV or VCR,
manufacturer’s customer service department. Only the manufacturer will be able to tell you very
quickly how to configure your TV or VCR to display the video signal coming from the ‘Video
Input’ jack.
D Note: Some projection TV sets do not properly display the standard blue background when
using most CDGs. If the background color is inconsistent or flashing, please try connecting your
SingingMachinetoastandardtubetelevision.
COMMONWAYSTO CONFIGUREYOURTVORVCR
Your Singing Machine is designed to connect to your TV the same way you would connect a
video camera, VCR or video game. The Singing Machine is constantly sending the video and
audio signals to the 'Video Out' and 'AUX OUT' jacks whenever you play a CDG. So, load a CDG
into your Singing Machine before you start making these connections. You will see lyrics on the
TVscreenassoonasyoucompletetheset upcorrectly.
We refer to TV/VCR because manufacturers use very similar ways to connect TVs and VCRs
and you can connect your Singing Machine to a TV, VCR or satellite system (contact your
satellite company for instructions). The setup of your TV/VCR is the most difficult part of making
the connection for displaying your Singing Machine lyrics. In most homes, the TV has either a
cable connected or antennae in use. Once you connect your Singing Machine to the TV/VCR,
choose the correct input on your TV/VCR to display lyrics from The Singing Machine instead of
theusualinput fromthecableorantennae.
Check your TV/VCR user manual for the easiest way to setup your particular entertainment
system. If you don't have your manual you can always contact your TV/VCR manufacturer for
information either by phone or viewing their website for online assistance. We've listed below
themost commonwaysof settingupaTV/VCR:
(1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection'
whereyoumaychoosebetween'Cable/Ant’, 'Video1', or'Video2'etc. astheinput source.
(2) Try looking for a 'Video' channel between the highest channel and the lowest channel on
your TV or VCR. (i.e. Between 99 and 2 may be 'VIDEO' or 'INPUT' or 'GAME')
(3) Look for a button on the remote control for the TV/VCR you are connecting to that says
'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR'
buttonwilldisplaytheVideoinput source.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTING AVIDEO COMPONENTFORINPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
anothervideosource:
(1) Locate the multicolored patch cords.
(2) Connect videocable(yellow)totheVideoInof thesideof theSingingMachine.
(3) Connect the other end of the video cable (yellow) to the Video Output on another video
sourcesuchasaVCR.
(4) Set the Function Selector to AUX mode and the Monitor Selector to AUX.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
SIDE VIEW OF
SINGING MACHINE
REAR VIEW OF VCR
R
L
VIDEO OUT
AUDIO OUT
VIDEO INPUT
VIDEO OUTPUT
(YELLOW JACK) (YELLOW JACK)
AUDIO CONNECTION
Connect the unit to your TV or home stereo system using the White and Red connections on the
supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the
unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other
end of the cable’s white (left channel) and red (right channel) plugs to your TV or home stereo
system’s ‘AUDIO IN’ or ‘AUX IN’ jacks.
SIDE VIEW OF
SINGING MACHINE
REAR VIEW OF TV
R
L
VIDEO IN
AUDIO IN
AUX OUTPUT AUX OUTPUT
AUDIO INPUT AUDIO INPUT
R
L
R
L
(RED JACK) (WHITE JACK)
(RED JACK) (WHITE JACK)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTING AN AUDIO COMPONENT FOR INPUT
To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing
along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the
Singing Machine’s AUX IN L & R jacks.
SIDE VIEW OF
ANOTHER
SINGING MACHINE
AUDIO COMPONENT
R
L
VIDEO OUT
AUDIO OUT
AUX INPUT
L
(WHITE JACK)
AUX INPUT
R
(RED JACK)
AUDIO OUTPUT
R
(RED JACK)
AUDIO OUTPUT
L
(WHITE JACK)
MONITOR SELECTOR
! To play a CDG disc, set the Monitor Selector to either CAMERA, CDG ,AUX or OFF mode.
! To display CDG lyrics on the Singing Machine’s monitor, set the Monitor Selector to CDG
mode.
! To display your image on the Singing Machine’s monitor, set the Monitor Selector to
CAMERAmode.
! To display a video signal from another A/V component, set the Function Selector to AUX
mode and Monitor Selector to AUX mode.
! To turn off the monitor on the Singing Machine, set the Monitor Selector to OFF mode.
! Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the
Singing Machine to have the best picture quality.
VIDEO OUT SELECTOR
! To display image on the TV, set Function Selector to CDG or AUX position and set the Video
Out SelectortoCAMERAmode.
! To display CDG lyrics on theTV, set Function Selector to CDG position and set the Video Out
SelectortoCDG mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OR CD+G OPERATION
D Warning - Tapping or dropping the microphone while it is on can permanently damage
your microphone. Resist the urge to swing the microphone around by the cord!
PREPARATION
! This unit is designed to play CD’s bearing the identification logo "
". If CD’s do not
conformtotheCDstandard, theymaynot playproperly.
! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion
fromthecenterof thedisctotheoutsideedge.
! Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will permanently damage the plastic
surface of the disc.
! Always place the compact disc on the disc tray with the label facing upward. Compact discs
canbeplayedononlyoneside.
! To remove a disc from its storage case, press down on the center of the case and lift the disc
out, holding it carefully by the edges.
! Discs should be returned to their cases after use to protect them from dust and scratches.
! To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperaturesforextendedperiodsof time.
! Do not apply paper or write anything on either side of the disc. The inks used in some felt-tip
pens may damage the surface of the disc.
PLAYING CD OR CD+G DISC
! Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.
! Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and
vocalsthroughyourTVorsoundsystem.
! Donot pressthedisccoverof theCDcompartment whileit’splaying.
! Neverplaceanythingontopof theSingingMachine. Foreignobjectscandamagetheunit.
! Donot applyexcessiveforcetodisccover.
! OnlyplaceonediscintheCDcompartment at atime.
TURNING POWERON/OFF
! Toturnonthekaraokecenter, presstheON/OFF button, theON/OFF LEDwilllight up.
! Toturnoff thesystem, presstheON/OFF buttonagain, theON/OFF LEDwillturnoff.
FUNCTIONSELECT
Set theFunctionSelectortoCDG.
MONITORSELECT
! ToplayaCDG, setMonitorSelectortoeitherCAMERA, CDG, AUXorOFF mode.
! To display the CDG lyrics on the Singing Machine’s monitor, set Monitor Selector to CDG
mode.
! Toturnoff themonitorontheSingingMachine, set MonitorSelectortoOFF mode.
! Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the
Singing Machine to have the best picture quality.
LOADINGADISC
! Lift the CD door at the OPEN/CLOSE point. Place a disc in the compartment with the printed
sidefacingupwardandtheshinysidefacingdown.
! Close the CD compartment. The LED window will display total number of track. (If no disc is
loaded, itwill display“
”).
(Refer to the Trouble Shooting Guide on page E21 if a disc is loaded but the total tracks
do not appear.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OR CD+G OPERATION
PLAY/PAUSE MODE
! To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE
LED will be lit.
! To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED
Indicatorwillflash.
! Toresumeplay, pressthisbuttonagain.
PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the
monitor. Any distortion will remain until the whole screen is refreshed during
an instrumental break or you stop the song and start it from the beginning.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown on the LED window).
SKIP PLAY(For both CD and CDG discs.)
! During STOP mode, you can skip up or down to your desired track number by pressing a
SKIPbutton(
- SKIP-
).
! To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (For audio CD disc only.)
When playing any audio CD, press and hold the SKIP button (
-SKIP-
). The CD will
search at high speed in the forward or backward direction. Normal play will continue when you
release the button.
REPEAT
! To repeat the track currently playing, press the REPEAT button once.The REPEAT LED will
start to flash.
! To repeat all tracks, press the REPEAT button twice. The REPEATLED will light up and stay
lit.
! To clear the repeat function. Press the REPEAT button again. The REPEATLED will turn off.
PROGRAM
! Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [ ].
Step 2: Press the double arrow keys (
-SKIP-
) to select a desired track.
Step 3: Press PROGRAM key to confirm entry. You can repeatthe same steps up to a
maximum of 20 tracks.
Step 4: Press PLAY to activate PROGRAM.
! Press the STOP button to clear all the programmed entries.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO AND OTHER OPERATIONS
AM/FM RADIO
1. Press the ON/OFF button.
2. Switch Function Selector to RADIO position.
3. Switch Band Selector to either AM or FM radio position.
4. Turn tuning knob to select desired station as indicated on dial.
5. Adjust Master Volume to your pleasure.
6. To turn the radio off, set Function Selector to CDG or AUX position.
SING ALONG - RADIO
1. Follow operating instructions for AM/FM radio.
2. Connect the supplied Microphone to either one of the Mic input jacks.
3. Adjust Master Volume and Mic Volume. Your voice will be combined with the radio
station output and will be heard through the speaker.
Note: Echo effect cannot be activated in radio mode.
PUBLIC ADDRESS - USING A MICROPHONE
The unit can be used as a PA(Public Address System).
Public Address (PA) Operation Procedures
1. Connect the supplied Microphone to either one of the MIC input jacks.
2. Press the ON/OFF button to turn the unit on.
3. Set the Function Selector to AUX. Move the MIC VOLUME control to central position.
4. Move the ON/OFF switch located on the Microphone to ON position and speak or sing
to the Microphone. The Microphone sensitivity and loudness could be adjusted as
required by turning the MIC VOLUME control and/or MASTER VOLUME control.
5. To add depth or ambiance to your voice, adjust the ECHO control until the desired effect
is obtained.
Note: To prevent feedback or whistling from occurring, please be sure that the
microphone is not too close to the unit.
SMM-107 WIRELESS MICROPHONE OPERATIONS
1) Unscrewing the bottom of wireless microphone.
2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked
insidethecompartment of thewirelessmicrophone.
3) Replacethebottomof wirelessmicrophone.
4) Theswitchonwirelessmicrophonehasthreesettings:
1. ON - The switch is in the top position. The microphone will function. The red indicator
light is on.
2. STANDBY -The switch is in the middle position. The microphone will not function. The
red indicator light is on.
NOTE: The purpose of this setting is to maintain a connection between the microphone
andtheSingingMachinewhenmovingaroundtheareainwhichit isbeingused.
3. OFF - The switch is in the bottom position. The microphone will not function. The red
indicator light is off.
NOTE: To ensure long battery life, please make sure that the wireless microphones is set to the
OFF position when not in use. When not in use for a long period of time, we recommend
that youremovetheDC9-Vbattery.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRELESS MICROPHONE INFORMATION
Warning: Modifying, tampering and adjustment to this unit or replacement of any
transmitter component (crystal, semiconductor, etc.) to this unit that could result in a
violation oftherules.
FCCNOTICE
This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency
available for the system. You must get a licence for the frequency you plan to use before you use
thesystem.
nearest FCC offices and contact them to get the necessary application. Licensibility depends on
howyouwillusethesystem.
ForRF exposure
“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the antenna or the device could
result in the system exceeding the RF exposure requirements.”
SAFETY INFORMATION
Your wireless microphone contains a low power transmitter. When the EUT is power on and it
sends out radio frequency (RF) signals. In August 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines with safety levels for wireless devices.
IMPORTANT
To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and
antenna at least 1 inch (2.5 centimetres) from your face and speak in a normal voice, with the
antenna pointed up and away from the face. Ensure that the antenna is at least 1 inch (2.5
centimetres)fromyourbodywhenyouusingyourwirelessmicrophone.
Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could
damage the transmitter and may violate FCC regulations.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
POWER SWITCH
CLEANING DISC
After using the unit, turn off the power by
pressing the ON/OFF button.
Cleaning will not normally be necessary.
However, should fingerprints, dust or
dirt appear, you can wipe them off with a
soft, lint-free cloth. Wipe the disc in a
straight line from center to edge. You
can moisten the disc first with ordinary
tap water if necessary.
CLEANING THE UNIT
To clean the exterior of the unit, simply wipe
with a soft clean cloth moistened with plain
lukewarm water.
CLEANING THE CD LASER LENS
For the Best Results: Use a CD-lens cleaning
disc according to the cleaning disc
manufacturer instructions.
If a lens cleaning disc is not available, use a
clean, soft, dry cotton cloth to gently wipe the
small, glass, fish-eye laser lens located in the
CD players.
NOTE: Do not use detergent
or abrasive cleaning agents
as they can damage the disc.
To prevent fire or shock hazard,
disconnect your stereo system
from the AC power plug when
cleaning.
CD PLAYER
The player mechanism is fitted with self-
lubricating bearings and must not be
oiled or greased.
COMPACT DISC
Handling Disc
Although the music tracks on the disc
are covered with a protective layer, it is
still advisable to treat the disc carefully.
Ensure that you always pick up discs by
the edge, and put them back in their
holders immediately after use.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No power when POWER No power plug connection at Insert the power plug into the AC
ison. the AC outlet. outlet.
No power when plugged The AC outlet may not have Check the outlet with a working
in.
power.
lamp or other electrical appliance.
Volume control is set to
minimum.
No sound.
Turn up the volume.
The wrong function is
selected.
Select the correct function.
Volume control on TV set/PA Turn up the volume at TV set/PA
system is set to minimum.
TV set/PAsystem power is
OFF.
system.
Turn on the power at TV set/PA
system.
No sound from TV/PA.
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
TV/PAsystem.
Patch cords are not
connected securely.
Disc is inserted upside
down.
Insert disc correctly.
Disc is dirty.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo as described on page E16.
Disc is scratched.
Disc is warped.
A nonstandard disc is
inserted.
CD PLAYER
cannot work normally or
“aai”, “aa” , or “aaa” are
displayed.
Moisture has formed inside Wait about 20 to 30 minutes to let
the CD deck. it dry out.
Singing Machine needs to be Disconnect the machine from
reset.
power source for 30 seconds.
Select AUX IN as the source for
your home stereo.
Source Selection on your
stereo is not set properly.
Follow direction on page E14 for
connecting to a home stereo
system.
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
home stereo system.
Improper Connection to
stereo system or PA.
No sound - If audio is
going through home
stereo.
Patch cords are not
connected securely.
Source Selection on TV or
VCR is not correct.
Follow directions on page E13 for
“Making the Connections”.
No sound - If audio is
going through TV or
VCR.
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
TV/VCR.
Patch cords are not
connected securely.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Connect the video cable to the
Singing Machine’s VIDEO OUT
andtotheTVVIDEO IN.
Video cable is not connected
properly to the TV.
Using your TV remote to select
VIDEO input or select the proper
VIDEO input on the TV itself.
(Refer to page E13 under
Common ways to configure your
TV or VCR)
Source selector on TV is not
set to VIDEO.
No song lyrics appear
on TV screen.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or connect to an RF
TV does not have video line Modulator and then to the TV
input.
cable input. Refer to “Making the
Connections” on page E13.
Check the disc to be sure it is a
CDG. (See page E24 for details.)
Check disc to be sure it is clean.
(See page E20 for cleaning
instructions.)
A CDG is loaded but the
CDG indicator is not lit.
Balance is not adjusted
properly.
AVC is activated to
Maximum.
Adjust balance to mid point.
Adjust AVC to Minimum.
While playing CDG and
singing with the
microphone, the music
or vocal cuts out.
Play track that includes music and
vocal.
Playing music only track.
VERTICAL HOLD Control is Adjust the VERTICAL HOLD
not set correctly. Control.
The Camera Lens is down. Lift up a Camera Lens.
Picture is jumping up.
MONITOR Selector is not
set properly.
Set MONITOR Selector to
CAMERA mode.
No image display on
Singing Machine’s
monitor when
attempting to use
camera.
Lens cap is on.
Remove lens cap.
Brightness control not
adjusted properly on Singing
Machine.
Adjust Brightness control on
Singing Machine.
Wait a minute for the camera to
warm up.
Camera has not warmed up.
Camera lens is dirty.
Clean the camera lens.
Image is blurry.
Adjust the lens of the camera by
slightly rotating either left or right
until the display is clear. Do not
overturn the lens.
Camera lens is out of focus.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO SECTION:
OUTPUT POWER (MAXIMUM)
OUTPUT IMPEDANCE
7 WATTS (RMS)
6 OHMS
CD PLAYER SECTION:
FREQUENCY RESPONSE
SIGNAL - TO - NOISE RATIO
WOW AND FLUTTER
100 Hz - 20 kHz (+/-3 dB)
50 dB (A-WTD)
IMMEASURABLE
D - A CONVERSION
1-BIT DAC
NUMBER OF PROGRAMS
SAMPLING SYSTEM
20 STEPS RANDOM ACCESS PROGRAMMING
8 TIMES OVER SAMPLING
7” BLACK AND WHITE TV MONITOR
NTSC SYSTEM
MONITOR SECTION
220 LINE RESOLUTION
RADIO SECTION:
AM FREQUENCY RANGE
FM FREQUENCY RANGE
530-1710 kHz
88-108 MHz
-74 dB 600 OHMS IMPEDANCE WITH
6.3mm DYNAMIC MICROPHONE
MICROPHONE
POWER SECTION
DIMENSIONS (H x W x D)
WEIGHT
AC 110V-120V~60Hz
37.5 x 17.7 x 17.1 Inches / 95.2 x 45.0 x 43.5 cm
16.4 lbs / 7.4 kgs
1. PRE-RECORDED KARAOKE CD+G DISC
2. AV CABLE
3. WIRELESS MICROPHONE
4. SCREWS
ACCESSORIES
5. AC POWER CORD
Specifications are typical, individual units might vary. They are subject to continuous
improvement without noticeandwithout incurringanyobligation.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SINGING MACHINE KARAOKE GLOSSARY OF TERMS
In addition to all of the terminology associated with consumer electronics products, a few
additional terms are used almost exclusively in karaoke. These terms are meant to familiarize
you with the world of Karaoke. The features listed below may not necessarily pertain to the
particular model Singing Machine that you have. The following are some brief explanations of
karaoke terms:
Echo:
Echo adds depth and resonance to a singer's voice, without affecting the music. This echo is
producedbycreatingminorcontrolledfeedbackinthesinger'svoice.
Multiplex:
Our multiplex recordings contain 2 copies of the same song. One version is a stereo recording of
the song without the lead singer. The second version is recorded with the music and
background vocals on the left channel and the lead singer recorded on the right channel. This
‘split track’ recording allows you to control the volume of the lead singer by adjusting the balance
control. You can sing a duet with the lead singer or use the lead singer as a guide as you learn
the song, gradually fading them out with the balance control until you are able to sing the song
onyourown.
Auto VoiceControl (A.V.C.):
When the AVC function is activated, the vocals on a multiplex recording are eliminated as soon
as the singer begins singing into the microphone. When the singer stops singing, the vocals on
the multiplex recording are automatically re-activated. This useful function is used primarily
during practice sessions while a singer is learning a song. Please note that the AVC function
only works with multiplex recording and not with standard audio recordings.
Pitch Control:
This function controls pitch of music by controlling the speed at which a cassette tape plays
back. By increasing the speed of the tape, the music sounds higher (sharp). By slowing the tape
speed, the music sounds lower (flat).
Key Controller:
Key Controller changes the key of the CD/CDG music (+ or - steps) to adjust to the singer’s
voice.
CDG:
This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G, and
CD+Graphics. This is a regular audio CD with information stored on a data track simultaneous
to music. In laymen's terms, CDG has a video output for simple graphics (not full motion video).
In the case of karaoke, the graphics function is used to store song lyrics, and display the lyrics in
synch with music. In most cases, CDG software displays lyrics which change color as they are
to be sung. A regular television is all that is required to display CDG lyrics.
NOTE - CDG is a particular type of compact disc encoding system that is different from VCD or
DVD. Your Singing Machine can decode standard audio compact discs and CDG discs. It will
not read VCD or DVD encoded discs.
Standard audio discs and cassette tapes will not display lyrics on your TV. Audio CDs do not
contain the software necessary to display lyrics.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Singing Machine Company, Inc.
988-0411-ENG01
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.
PRINTED IN CHINA
TEL: (954) 596-1000
FAX: (954) 596-2000
Download from Www.Somanuals.com. All Manuals Search And Download.
|