SMVG-600
â
COMPACT DISC + GRAPHICS
WITH BUILT-IN TV KARAOKE CENTER
OWNER’S MANUAL
Please read before using this unit.
The Singing Machineâ is a registered trademark of The Singing Machine Co., Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before
the product is operated.
2. Retain Instructions - The safety and operating instructions should be retained for
futurereference.
3. Heed Warnings - All warnings on the product and in the operating instructions should
beadheredto.
4. Followinstructions-Alloperatinganduseinstructionsshouldbefollowed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior only. Do NOT
attempttocleantheinside.
6. Attachments- Do not use attachments not recommended by the product manufacturer as
theymaycausehazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool,
andthelike.
8. Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or
table. The product may fall, causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive force,
andunevensurfacesmaycausetheapplianceandcartcombinationtooverturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation
isprovided.
11. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power company. For products intended to
operatefrombatterypower, orothersources, refertotheoperatinginstruction.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
12. Grounding or Polarization - This product may be equipped with a polarized
alternating current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
ofthepolarizedplug.
Alternate Warnings - This product may be equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
ofthegrounding-typeplug.
13. Power-Cord Protection - Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the product.
14. Protective Attachment Plug - The product is equipped with an attachment plug
having overload protection. This is a safety feature. See Instruction Manual for
replacement or resetting of protective device. If replacement of the plug is required,
be sure the service technician has used a replacement plug specified by the
manufacturerthathasthesameoverloadprotectionastheoriginalplug.
15. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver,
be sure the antenna system is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding
electrodes, andrequirementsforthegroundingelectrode. Seefigure:
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC-NATIONAL ELECTRICAL CODE
S2898A
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
16. Lightning - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the product due to
lightningandpower-linesurges.
17. Power Lines - An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or circuits as contact
withthemmightbefatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral
conveniencereceptaclesasthiscanresultinariskoffireorelectricshock.
19. Object and Liquid Entry - Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
toqualifiedservicepersonnel.
21. Damage Requiring Service - Unplug this product from the wall outlet and refer
servicingtoqualifiedservicepersonnelunderthefollowingconditions:
a) Whenthepower-supplycordorplugisdamaged,
b) Ifliquidhasbeenspilled, orobjectshavefallenintotheproduct,
c) Iftheproducthasbeenexposedtorainorwater,
d) If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive
workbyaqualifiedtechniciantorestoretheproducttoitsnormaloperation.
e) Iftheproducthasbeendroppedordamagedinanyway, and
f ) When the product exhibits a distinct change in performance - this indicates a need for
service.
22. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electricshock, orotherhazards.
23. Safety Check - Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in proper
operatingcondition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as
recommendedbythemanufacturer.
25. Heat - The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
26. Nonuse Periods - Unplug the product’s power cord when you will not use it for an
extendedperiod.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SINGING MACHINE KARAOKE GLOSSARY OF TERMS
In addition to all of the terminology associated with consumer electronics products, a few
additional terms are used almost exclusively in karaoke. These terms are meant to familiarize
you with the world of Karaoke. The features listed below may not necessarily pertain to the
particular model Singing Machine that you have. The following are some brief explanations of
karaoketerms:
Echo:
Echo adds depth and resonance to a singer's voice without affecting the music. This echo is
producedbycreatingminorcontrolledfeedbackinthesinger'svoice.
Multiplex:
Our multiplex recordings contain 2 copies of the same song. One version is a stereo recording of
the song without the lead singer. The second version is recorded with the music and
background vocals on the left channel and the lead singer recorded on the right channel. This
‘split track’ recording allows you to control the volume of the lead singer by adjusting the balance
control. You can sing a duet with the lead singer or use the lead singer as a guide as you learn
the song, gradually fading them out with the balance control until you are able to sing the song
onyourown.
AutoVoiceControl(AVC):
When the AVC function is activated, the vocals on a multiplex recording are eliminated as soon
as the singer begins singing into the microphone. When the singer stops singing, the vocals on
the multiplex recording are automatically re-activated. This useful function is used primarily
during practice sessions while a singer is learning a song. Please note that the AVC function
onlyworkswithmultiplexrecordingandnotwithstandardaudiorecordings.
PitchControl:
This function controls pitch of music by controlling the speed at which a cassette tape plays
back. By increasing the speed of the tape, the music sounds higher (sharp). By slowing the tape
speed, themusicsoundslower(flat).
KeyController:
Key Controller changes the key of the CD/CDG music (+ or - steps) to adjust to the singer’s
voice.
CDG:
This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G, and
CD+Graphics. This is a regular audio CD with information stored on a data track simultaneous
to music. In laymen's terms, CDG has a video output for simple graphics (not full motion video).
In the case of karaoke, the graphics function is used to store song lyrics, and display the lyrics in
synch with music. In most cases, CDG software displays lyrics which change color as they are
to be sung. A regular television is all that is required to display CDG lyrics.
NOTE - CDG is a particular type of compact disc encoding system that is different from VCD or
DVD. Your Singing Machine can decode standard audio compact discs and CDG discs. It will
notreadVCDorDVDencodeddiscs.
Standard audio discs and cassette tapes will not display lyrics on your TV. Audio CDs do not
containthesoftwarenecessarytodisplaylyrics.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
YourSMVG-600 Compact Disc +Graphics with
will provideyou withmany years
of fun and entertainment. It can let you be the “star” as you sing along with your favorite
recordingsandhearyourvoicewiththemusicthroughthesystem’sspeakers.
This Karaoke Center is easy to use, yet full of features with a compact design. After just a few
simple instructions, you will become an expert. Before you use your SMVG-600, please glance
through this manual to familiarize yourself with all the features available and the sections of the
manual that describe their operation. Next, go to the section for the specific operation you wish
toperform.
Foryoureasyreference, listedherearesomeofthemainfeaturesofthisKaraokeCenter:
LyricsonTVscreen-displaysthelyricswiththetempoofmusicwhenplayingCD+Gdiscs.
Auto Voice Control- lets you replace the original singer's voice with your own voice when any
prerecorded, multiplex karaoke disc or tape is played. To activate, just rotate Mic Volume to a
comfortable listening level, and Auto Voice Control for the best balance between playback and
microphonelevels.
Balance Control - lets you adjust the balance between the prerecorded original singer's voice
andthemusicifyouuseamultiplexkaraokedisc.
EchoControl-letsyouaddanechotoenrichyourvoiceforaconcerthalleffect.
Master Volume Control- lets you turn the volume control clockwise or counter-clockwise until
desiredvolumelevelisobtained.
-liftup camera lens todisplay your image onTheSinging Machine’smonitor.
Built-InSpeaker-letsyousharethemusicwithyourfamilyorfriends.
Auxiliary Output Jacks - lets you connect another audio output component, such as an
equalizer/boosteroraPAsystem.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
1
2
3
4
5
6
7
8
9
10
11
17
18
19
20
12
13
14
15
21
16
22 23
24 25
26
27
FRONT VIEW
1. CAMERA Lens
2. VIDEO OUT Selector
(CAMERA/CDG/AUX)
3. CD Tray
4. MONITOR
5. A.V.C. Control (Auto Voice Control)
6. MASTER Volume Control
7. BALANCE Control
14. PROGRAM Button
15. REPEAT Button
16. INTRO Button
17. ECHO Control
18. CD Tray OPEN/CLOSE Button
19. Loudspeaker
20. PLAY/PAUSE Button
21. STOP Button
8. MIC Volume Control
9. MONITOR Selector
(CAMERA/CDG/AUX/OFF)
10. POWER Button
11. POWER On Indicator
12. AUDIO Selector (CDG/AUX)
13. Loudspeaker
22. PROGRAM Indicator
23. REPEAT Indicator
24. SKIP Buttons
25. LED Display
26. CDG Indicator
27. PLAY/PAUSE Indicator
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
28
29
SIDE VIEW
28. MIC 1 Jack
29. MIC 2 Jack
34
35
30
31
36
37
32
33
38 39
REAR VIEW
30. BRIGHTNESS Control
31. CONTRAST Control
32. VIDEO IN Jack
33. VIDEO OUT Jack
34. AUX OUT Jack (L)
35. VERTICAL HOLD Control
36. AUX IN Jack (L)
37. DC Jack (DC 16V)
38. AUX OUT Jack (R)
39. AUX IN Jack (R)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTINGPOWER
YoucanpowerthesystemfromastandardACoutletbyusingthesuppliedAC-DCadapter.
CAUTION: The adapter must be connected to the power voltage which is the same as the local
area. Ifnot, thereisadangerofBURNINGtheunitthatcausesafire.
DC 16V
Adapter
ForUKonly
CAUTION: The adapter is designed to operate from a main supply of 230V AC~50Hz. The unit
is fitted with a 13amp (BS 1363) main plug. Should the fuse in the main plug require replacing a
3amp (BS 1363) fuse must be fitted. Ensure the voltage of your electrical power supply
matchesthoseindicatedontheratinglabellocatedonthetopoftheadapter.
If the socket outlets in your home are not suitable for the plug supplied with the unit, the plug
shouldberemovedandanappropriateonefitted.
CONNECTINGTOYOURTV
The Singing Machine provides a patch cord to give you the option of connecting your
SMVG-600 to an external audio/sound system and video device. The patch cord has three RCA
jacks at each end. White and Red are for left and right audio connections and the Yellow is for
connectingthevideo.
Make sure that you have a CDG disc in the Singing Machine and playing when you are making
this connection. You will know you have the proper settings on your TV or VCR as soon as you
seetheSingingMachinelogoorlyricsonthescreen!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
VIDEOCONNECTION(forTV)
PleasefollowthestepsbelowtodisplayCDGlyricsontheTVscreen:
(1) Locatethemulticoloredpatchcords.
(2) ConnectVideoCable(yellow)totheVideoOutofthebackoftheSingingMachine.
(3) Connect the other end of the Video Cable (yellow) to the Video Input on your TV or
VCR.
REAR VIEW OF
SINGING MACHINE
REAR VIEW OF TV
R
L
VIDEO IN AUX OUT AUX IN
L
L
VIDEO IN
AUDIO IN
R
R
VIDEO OUT
VIDEO INPUT
(Yellow Jack)
VIDEO OUTPUT
(Yellow Jack)
VIDEOCONNECTION(forVCRrecording)
PleasefollowthestepsbelowtorecordCDGlyricsorimageontheVCR:
(1) Locatethemulticoloredpatchcords.
(2) ConnectVideoCable(yellow)totheVideoOutofthebackoftheSingingMachine.
(3) Connect the other end of the Video Cable (yellow) to the Video Input on your
VCR.
REAR VIEW OF
SINGING MACHINE
REAR VIEW OF VCR
R
L
VIDEO IN AUX OUT AUX IN
L
L
VIDEO IN
AUDIO IN
R
R
VIDEO OUT
AUX OUT
AUX IN
(white Jack)
(white Jack)
AUX OUT
(Red Jack)
AUX IN
(Red Jack)
VIDEO INPUT
(Yellow Jack)
VIDEO OUTPUT
(Yellow Jack)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
If your television or VCR does not have the required Video Input, you will need an RF Modulator
(Radio Frequency Modulator), which connects through your TV Antenna or cable line and
serves as Video Input.
An RF Modulator can be purchased at almost any consumer electronics retailer. If you are
connecting the video from the Singing Machine to either a television or a VCR video input jack,
you must specify the source the TV or VCR is to display.Your TV or VCR user guide can tell you
howtodisplaythevideosignalfromthe‘VideoIn’jack.
If you don’t have the manual for your TV or VCR, we suggest calling the TV or VCR,
manufacturer’s customer service department. Only the manufacturer will be able to tell you very
quickly how to configure your TV or VCR to display the video signal coming from the ‘Video
Input’jack.
D Note: Some projection TV sets do not properly display the standard blue background when
using most CDGs. If the background color is inconsistent or flashing, please try connecting your
SingingMachinetoastandardtubetelevision.
COMMONWAYSTOCONFIGUREYOURTVORVCR
Your Singing Machine is designed to connect to your TV the same way you would connect a
video camera, VCR or video game. The Singing Machine is constantly sending the video and
audio signals to the 'Video Out' and 'AUX OUT' jacks whenever you play a CDG. So, load a CDG
into your Singing Machine before you start making these connections. You will see lyrics on the
TVscreenassoonasyougetthesetupcompletedcorrectly.
We refer to TV/VCR because manufacturers use very similar ways to connect TVs and VCRs
and you can connect your Singing Machine to a TV, VCR or satellite system (contact your
satellite company for instructions). The setup of your TV/VCR is the most difficult part of making
the connection for displaying your Singing Machine lyrics. In most homes, the TV has either a
cable connected or antennae in use. Once you connect your Singing Machine to the TV/VCR,
you must 'tell' your TV/VCR to display the input from the Singing Machine instead of the usual
inputfromthecableorantennae.
Check your TV/VCR user manual for the easiest way to setup your particular entertainment
system. If you don't have your manual you can always call your TV/VCR manufacturer for that
information or try hitting their website for online assistance. We've listed below the most
commonwaysofsettingupaTV/VCR:
(1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection'
whereyoumaychoosebetween'Cable/Ant.', 'Video1', or'Video2'etc. astheinputsource.
(2) Try looking for a 'Video' channel between the highest channel and the lowest channel on
yourTVorVCR. (i.e. Between99and2maybe'VIDEO'or'INPUT'or'GAME')
(3) Look for a button on the remote control for the TV/VCR you are connecting to that says
'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR'
buttonwilldisplaytheVideoinputsource.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTINGAVIDEOCOMPONENTFORINPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
anothervideosource:
(1) Locate the multicolored patch cords.
(2) ConnectVideoCable(yellow)totheVideoInofthebackoftheSingingMachine.
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video
sourcesuchasaVCR.
(4) Set the MONITOR Selector to AUX mode and theAUDIO Selector to AUX mode.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
REAR VIEW
OF VIDEO SOURCE
REAR VIEW OF
SINGING MACHINE
R
L
VIDEO IN AUX OUT AUX IN
L
L
VIDEO OUT
AUDIO OUT
R
R
VIDEO OUT
VIDEO OUTPUT
(Yellow Jack)
VIDEO INPUT
(Yellow Jack)
AUDIO CONNECTION
Connect the SMVG-600 to your TV or home stereo system using the White and Red
connections on the supplied patch cord. Plug the white end of the patch cord into the white AUX
OUT jack on the SMVG-600. Plug the red end of the patch cord into the red AUX OUTjack on
SMVG-600. Now connect the other end of the cable’s white (left channel) and red (right channel)
plugstoyourTVorhomestereosystem’s‘AUDIOIN’or‘AUXIN’jacks.
REAR VIEW OF
SINGING MACHINE
REAR VIEW OF TV
R
L
AUX IN
AUX OUT
L
L
VIDEO IN
AUDIO IN
R
R
AUX OUTPUT
L
(White Jack)
AUX OUTPUT
R
(Red Jack)
AUDIO INPUT AUDIO INPUT
R
(Red Jack) (White Jack)
L
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTING AN AUDIO COMPONENT FOR INPUT
To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing
along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the
Singing Machine’s AUX IN L & R jacks.
REAR VIEW OF
SINGING MACHINE
ANOTHER
AUDIO COMPONENT
R
L
AUX IN
AUX OUT
L
L
VIDEO OUT
AUDIO OUT
R
R
AUX INPUT
R
(Red Jack)
AUX INPUT
L
(White Jack)
AUDIO OUTPUT AUDIO OUTPUT
R
(Red Jack)
L
(White Jack)
MONITOR Selector
! To play a CDG disc, set the MONITOR Selector to either CAMERA, CDG or OFF mode.
! To play another audio component, set the MONITOR Selector to AUX mode.
! To display CDG lyrics on the Singing Machine’s monitor, set the MONITOR Selector to CDG
mode.
! To display your image on the Singing Machine’s monitor, set the MONITOR Selector to
CAMERAmode.
! ToturnoffthemonitorontheSingingMachine, settheMONITORSelectortoOFFmode.
! Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the
Singing Machine to have the best picture quality.
VIDEO OUT Selector
! To display image on the TV, set the VIDEO OUT Selector to CAMERA mode.
! To display CDG lyrics on the TV, set the VIDEO OUT Selector to CDG mode.
! To display image on theTV from another video source, set the VIDEO OUT Selector to AUX
mode.
AUDIO Selector
! To listen to music from your SMVG-600, set AUDIO Selector to CDG mode.
! To listen to music from another audio component, set the AUDIO Selector toAUX mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OR CD+G OPERATION
*Warning - Tapping or dropping the microphone while it is on can permanently damage
your microphone. Resist the urge to swing the microphone around by the cord!
PREPARATION
! This unit is designed to play CD’s bearing the identification logo "
conformtotheCDstandard, theymaynotplayproperly.
". If CD’s do not
! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion
fromthecenterofthedisctotheoutsideedge.
! Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will permanently damage the plastic
surfaceofthedisc.
! Always place the compact disc on the disc tray with the label facing upward. Compact discs
canbeplayedononlyoneside.
! To remove a disc from its storage case, press down on the center of the case and lift the disc
out, holdingitcarefullybytheedges.
! Discsshouldbereturnedtotheircasesafterusetoprotectthemfromdustandscratches.
! To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperaturesforextendedperiodsoftime.
! Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips
pensmaydamagethesurfacesofthedisc.
PLAYINGCDORCD+GDISC
Reminders:
! Adjust MASTER VOLUME control on your SMVG-600, TV or audio system to a comfortable
level.
! Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and
vocalsthroughyourTVorsoundsystem.
! Never place anything except a compact disc on the disc tray. Foreign objects can damage
the unit.
! Only place one disc on the disc tray at a time.
TURNING POWER ON/OFF
! To turn on the Karaoke center, press the POWER button. The POWER ON LED Indicator will
light up.
! To turn off the system, press the POWER button again. The POWER ON LED Indicator will
turn off.
MONITOR SELECT
! To play a CD+G, setMONITOR Selector to either CAMERA, CDG or OFF mode.
! To display the CDG lyrics on the Singing Machine’s monitor, set MONITOR Selector to CDG
mode.
! ToturnoffthemonitorontheSingingMachine, setMONITORSelectortoOFFmode.
! Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the
Singing Machine to have the best picture quality.
AUDIO SELECT
! Set the AUDIO Selector to CDG mode. When using CDG.
LOADINGADISC
! Press CD TRAYOPEN/CLOSE button to open CD drawer. Place a disc in the drawer with the
printedsidefacingupwardandtheshinysidefacingdown.
! Press the CD Tray OPEN/CLOSE button again to close the CD drawer. The LED window will
displaytotalnumberoftracks. (Ifnodiscisloaded, itwilldisplay“ ”)
(Refer to the Trouble Shooting Guide on page 17 if a disc is loaded but the total tracks do
not appear.)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OR CD+G OPERATION
PLAY/PAUSEMODE
! To start playing, press the PLAY/PAUSE button, the first track [ ] and the PLAY/PAUSE
LED Indicator will be displayed.
! To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED Indicator
willflash.
! Toresumeplay, pressthisbuttonagain.
PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the
monitor. Any distortion will remain until the whole screen is refreshed during
an instrumental break or you stop the song and start it from the beginning.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown on the LED window).
SKIP PLAY(For both CD and CDG discs)
! During STOP mode, you can skip up or down to your desired track number by pressing the
SKIPbutton(
-SKIP-
).
! To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (For audio CD disc only)
When playing any audio CD, press and hold the SKIP button (
-SKIP-
), the CD will
search at high speed in the forward or backward direction. Normal play will continue when you
release the button.
REPEAT PLAY
! To repeat the track currently playing, press the REPEAT button once, the REPEAT LED
Indicator will flash, then press the PLAY/PAUSE button.
! To repeat all tracks, press the REPEAT button twice, the REPEAT LED Indicator will light up.
Press the PLAY/PAUSE button to begin.
! To clear the repeat function. Press the REPEAT button again, the REPEAT LED Indicator will
turn off.
PROGRAM PLAY
! Use the PROGRAM button to program and play back songs in a pre-selected order.
! Programming should be done in the STOP mode only. Press the PROGRAM button once
then the PROGRAM LED flashes, number [
- SKIP -
] will also display. Press SKIP buttons
) to select a desired track and press the PROGRAM button to confirm entry.
(
You can repeat the same steps up to a maximum of 19 tracks.
! Press PLAY/PAUSE button when you have completed programming and you are ready to
start singing.
! To clear all the programmed memories, press STOP button.
INTRO PLAY
! Press the INTRO button once, then press PLAY. The CD player will play up to 10 seconds of
each track as an introduction.
! Press the INTRO button again to stop intro scan play.
Note: The first few seconds of most tracks is silence.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
POWER SWITCH
After using the SMVG-600, turn off the power
by pressing the POWER button.
CLEANING DISC
Cleaning will not normally be necessary.
However, should fingerprints, dust or
dirt appear, you can wipe them off with a
soft, lint-free cloth. Wipe the disc in a
straight line from center to edge. You
can moisten the disc first with ordinary
tap water if necessary.
CLEANING THE UNIT
To clean the exterior of the unit, simply wipe
with a soft clean cloth moistened with plain
lukewarmwater.
CLEANING THE CD LASER LENS
For Best Results: Use a CD-lens cleaning
disc according to the cleaning disc
manufacturerinstructions.
To prevent fire or shock hazard,
disconnect your stereo system
from the AC power plug when
cleaning.
N O T E : D o n o t u s e t h e
d e t e r g e n t o r a b r a s i v e
cleaning agents, for they can
damage the disc.
COMPACT DISC
Handling Disc
CD PLAYER
The player mechanism is fitted with self-
lubricating bearing and must not be
oiled or greased.
Although the music tracks in the disc are
covered with a protective layer, it is still
advisable to treat the disc carefully.
Ensure that you always pick up discs by
the edge, and put them back in their
holders immediately after use.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locateandremedytheproblem.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No power when
POWER is on.
No DC jack connection at
the AC adapter.
Insert the DC jack into the DC
socket on back of cabinet.
No power when plugged The AC outlet may not have Check the outlet with a working
in.
power.
lamp or other electrical appliance.
Volume control is set to
minimum.
Turn up the volume.
Volume control on TV set/PA Turn up the volume at TV/PA
system is set to minimum.
system.
No sound.
TV set/PAsystem power is
OFF.
Turn on the power at TV/PA
system.
AUX OUT jacks not
connected.
Follow directions on page 12 for
‘Audio Connection’.
Disc is inserted upside
down.
Insert disc correctly.
Disc is dirty.
Wipe clean with soft cloth.
Use a new disc.
Disc is scratched.
Disc is warped.
CD PLAYER
cannot work normally or
Use a new disc.
¢ ¢, ¢ ¢ , or ¢
displayed.
¢ are
A nonstandard disc is
inserted.
Only use discs bearing standard
logo as described on page 14.
Moisture has formed inside Wait about 20 to 30 minutes to let
the CD deck.
it dry out.
Singing Machine needs to
be reset.
Unplug machine for 30 seconds.
Source Selection on your
stereo is not set properly.
Select AUX IN as the source for
your home stereo.
No sound - If audio is
going through home
stereo.
Follow direction on page 12 for
connecting to a home stereo
system.
Improper Connection to
stereo system or PA.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
No sound - If audio is
going through TV or
VCR.
Source Selection on TV or
VCR is not correct.
Follow directions on page 10 for
‘Video Connection’.
Connect the video cable to the
Singing Machine’s VIDEO OUT
andtotheTVVIDEOIN.
Video cable is not connected
properly to the TV.
Source selector on TV is not Using your TV Remote to select
set to VIDEO.
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or Connect to an RF
No song lyrics appear
on screen.
TV does not have video line Modulator and then to the TV
input.
cable input. Refer to “Making the
Connections” on page 9.
Check the disc to be sure it is a
CDG. (See page 5 for details)
Check disc to be sure it is clean.
(See page 16 for cleaning
instructions.)
A CDG is loaded but the
CDG indicator is not lit.
VERTICAL HOLD Control is Adjust the VERTICAL HOLD
not set correctly. Control.
Picture is jumping up.
The Camera Lens is down. Lift up a Camera Lens.
No image display on
Singing Machine’s
monitor.
Monitor Selector is not set
properly.
Set MONITOR Selector to
CAMERA mode.
Adjust mic volume to max. Then
back it off to a comfortable level.
Mic volume control.
Mic is off.
No sound from mic.
Turn on mic with the ON/OFF
switch located on the microphone.
Please call Customer Service at 954-596-1110 if the Trouble Shooting Guide information
doesn’tcorrectyourproblem.
Servicing of a Singing Machine by an unauthorized repair facility will void your warranty. The
Singing Machine cannot guarantee future repairs on machines that have been tampered with by
unauthorizedpersonnel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO SECTION:
OUTPUT POWER (10% THD)
OUTPUT IMPEDANCE
2 WATTS + 2 WATTS (RMS)
8 ohms
CD PLAYER SECTION:
FREQUENCY RESPONSE
SIGNAL - TO - NOISE RATIO
WOW AND FLUTTER
100 Hz - 20KHz
50 dB
IMMEASURABLE
D - A CONVERSION
NUMBER OF PROGRAMS
SAMPLING SYSTEM
1 BIT D/A CONVERTER
19 TRACKS PROGRAM MEMORY
8 TIME OVER SAMPLING
5.5” TV MONITOR
NTSC, PAL2 SYSTEM
220 LINE RESOLUTION
MONITOR SECTION
MICROPHONE
-74 dB 600OHM IMPEDANCE WITH
Æ6.3mm DYNAMIC MICROPHONE
POWER SECTION:
(Where applicable)
DC 16V/2500mA AC TO DC
ADAPTER(INCLUDED)
DIMENSIONS (H x W x D)
WEIGHT
11.7 x 7.6 x 8.6 Inches / 30 x 19.6 x 22 cm
7.1 Lbs / 3.2Kg (Approx.)
1. Pre-recorded Karaoke CD+G disc
2. AV Cable
3. Dynamic Microphone
4. Instruction Manual
ACCESSORIES
Specifications are typical, individual units might vary. They are subject to continuous
improvementwithoutnoticeandwithoutincurringanyobligation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY and SERVICE
THE SINGING MACHINE COMPANY, INC. warrants this product to be free from defects in material
and workmanship for a period of Ninety (90) days from date of sale to the original consumer purchaser.
Product will be replaced or repaired free of charge if it has proven to be defective within the Ninety (90)
day period when said product is returned at customer expense within the warranty period. THIS
WARRANTY DOES NOT COVER ANY EXPENSES INCURRED IN THE REMOVAL AND
REINSTALLATION OF THIS PRODUCT.
This warranty does not apply to any product damaged by accident, misuse, abuse, improper line voltage,
fire, water, lightning or other acts of God, or any parts or service furnished by anyone else. The warranty
does not cover cartons, carrying cases, batteries, broken or damaged cabinets, or any other items used in
connection with the product or consequential damages due to defect in the product. This warranty does
not cover products sold AS IS or Re-manufactured units or units sold outside the SMC distribution
channel.
ALLIMPLIEDWARRANTIESARELIMITEDTOTHEDURATIONOFTHISWARRANTY.THISIS
THE COMPLETE WARRANTY AND NO OTHER EXPRESSED WARRANTY IS VALID. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOWLONG AN IMPLIED WARRANTY LASTS OR
AN EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THEABOVELIMITATIONSOREXCLUSIONSMAYNOTAPPLYTOYOU.
This warranty gives you specific legal rights and you may also have other rights, which may vary from
state to state.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please call us at (954) 596-1110 and we
willgiveyouinformationonhowtoobtainrepairservices.
TO OBTAIN SERVICE ON WARRANTY UNITS, the unit must be sent prepaid by insured
parcel post or UPS to the SMC service center address. To establish your eligibility for free
repair or replacement, YOU MUST INCLUDE a note explaining how the unit is defective,
the street address and your phone number we should use for shipping, AND attach a
COPYofyourproofofpurchaseshowingtheunitiswithinthe90daywarranty.
SERVICE CENTER:
THE SINGING MACHINE COMPANY
303 W.Artesia Blvd.
Compton, CA 90220-5525
USA
The Singing Machine Company, Inc.
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.
TEL: (954) 596-1110 FAX: (954) 596-2000
PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
|