OPERATING INSTRUCTIONS
LCD19-919
COLOUR TELEVISION WITH REMOTE CONTROL
For assistance, please call our Tesco Electrical Helpline on 0845 4566767
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Introduction
Thank you for choosing this product. This manual will
guide you for the proper operation of your
TV. Before operating the TV, please read
this manual thoroughly.
Please do keep this manual in a safe place
for future references.
M
P
<
P
This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD recorder,
VCR, PC etc.). This device is only suitable for the
operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modifications have been
made. To operate your LCD-TV in extreme ambient
conditions may cause the damage of the device.
O
K
Batteries: 2 X AAA
T
D
T
V
I
N
F
O
i
I
-
I
I
+
V
-
+
P
-
2
3
1
A
B
C
D
E
F
G
H
I
4
5
6
J
K
L
M
N
O
P
Q
R
7
8
9
S
T
U
V
W
X
Y
Z
P
P
0
-
/
-
-
E
X
I
T
W
I
D
E
P
C
G
U
I
D
E
/
Instruction Book
Preparation
Remote
Control
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set.
Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
Use this device in moderate climates.
• HDMI connector for digital video and audio. This
connection is also designed to accept high definition
signals.
1
0
c
m
• 200 programmes from VHF, UHF(analogue).
• 500 programmes for digital mode (IDTV).
• OSD menu system.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system.
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5 minutes the
TV switches automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98,ME,2000,XP, Vista,
Windows 7.
• Game Mode (optional).
English - 2 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 22
15.02.2010 14:40:09
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Read the following recommended safety
precautions carefully for your safety.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Power Source
Replacement Parts
The TV set should be operated only from a 220-240
VAC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance by
pulling from the power cord and never touch the power
cord with wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or tie it with
other cords. The power cords should be placed in such a
way that they are not likely to be stepped on.Adamaged
power cord can cause fire or give you an electric shock.
When it is damaged and needs to be replaced, it should
be done by qualified personnel.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with liquids,
such as flower vases, on top. Avoid from
dripping or splashing.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area. Don’t try
to recharge batteries. Danger of explosion. Replace
batteries only with the same or equivalent type.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Information for Users in European
Union Countries
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
This symbol on the product or on its
packaging means that your electrical
and electronic device should be
disposed at the end of its service
life separately from your household
wastes. There are separate collection
systems for recycling in EU.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
For more information, please contact
the local authority or the dealer where you purchased
the product.
Heat and Flames
The set should not be placed near to open
flames and sources of intense heat such
as an electric heater. Ensure that no open
flame sources, such as lighted candles,
are placed on top of the TV. Batteries
should not be exposed to excessive heat
such as sunshine, fire or the like.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
English - 3 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 33
15.02.2010 14:40:09
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
The Standby / On button doesn´t separate this
device completely from mains. Moreover the device
consumes power in the standby operation. In order to
separate the device completely from mains, the mains
plug has to be pulled from the mains socket. Because
of that the device should be set up in a way, that an
unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately. To exclude the danger of fi re, the
power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.
Electrical device not in the hands of
children
Never let children use electrical device unsupervised.
Children can´t always recognize properly the possible
dangers.
Batteries / accumulators can be life threatening when
swallowed. Store batteries out of the reach for small
children. In case of swallowing a battery medical aid
has to be sought immediately. Also keep the packaging
materials away from children. There is danger of
suffocation.
English - 4 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 44
15.02.2010 14:40:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the Remote Control
1. Standby
1
2
3
2. Yellow (Feature menu) / Current language
(in DTV mode) (*)
3. Blue (Install menu)
4. Previous programme
5. Cursor up
1
7
1
8
6. Cursor right
4
5
7. Cursor down
1
9
M
P
<
P
8. TV / Digital TV
9. Mono/Stereo - Dual I-II
2 0
2 1
2 2
6
7
O
K
10. Programme up / Page down (in DTV
mode) /Programme down / Page up (in
DTV mode)
8
9
D
T
V
11. Numeric buttons
I
N
F
O
i
I
-
I
I
12. Exit (in DTV mode)
2
3
13. Hold (in TXT mode)
+
V
-
+
P
-
1
0
2
4
14. Update (in TXT mode) / No function
15. Index page / Guide (in DTV mode)
2
5
2
3
1
A
B
C
D
E
F
G
H
I
16. Reveal (in TXT mode) / Switch from TV to
1
1
4
5
6
J
K
L
M
N
O
P
Q
R
PC
7
8
9
S
T
U
V
W
X
Y
Z
17. Green (Picture menu)
18. Red (Sound menu)
19. Menu
2
6
P
P
0
-
/
-
-
1
2
3
E
X
I
T
1
2
2
7
8
1
4
20. OK / Select / Freeze Picture (analogue TV
mode) / Hold (in TXT mode) / Channel List
(DTV mode)
W
I
D
E
P
C
G
U
I
D
E
/
2
9
1
5
3
0
1
6
21. Cursor Left
22. AV / Source
23. Info
24. Volume up/down
25. Mute
26. Picture mode selection
27. Time / Subtitle on-off (in DTV mode) (**)
28. Teletext / PAT mode
29. Mix (in TXT mode) / No function
30. Expand (in TXT mode) / Image size
(*) Only available for EU country options.
(**) Only available for UK.
Note: Buttons that are not indicated with a
number on the remote control illustration
are not functional in TV mode.
Remote range is approximately 7m/23ft
English - 5 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 55
15.02.2010 14:40:10
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD TV and Operating Buttons
FRONT and REAR VIEW
SIDE VIEW
Control Buttons
1. Up button
2. Down button
3. Programme/Volume / AV
selection button
4. Standby/On button
Note:You can use “+/-” buttons to
change volume. If you want to change
channels, press P/V/AV button once
and then use “+/-” buttons. If you hold
the P/V/AV button about a few seconds,
source OSD will be displayed. Main
menu OSD cannot be displayed via
control buttons.
Viewing the Connections- Back Connectors
1. SCART socket inputs or outputs for external devices.
Connect the SCART cable between SCART socket on TV and
SCART socket on your external device (such as a decoder, a VCR
or a DVD player).
Note: If an external device is connected via the SCART socket, the
TV will automatically switch to AV mode.
2. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the
PC output on your PC. Component Video Inputs (YPbPr) are used
for connecting component video.
You can use PC input to enable YPbPr signal connection with a
device that has component output. Connect the YPbPr to PC cable
between the PC INPUT on the TV and the component video outputs
of your device. (YPbPr cable is not supplied)
3. HDMI : HDMI input
HDMI Input is for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
signals. No sound connection is needed for an HDMI to HDMI connection.
4. RF Input connects to an antenna or a cable system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
When you use the wall mount kit (optional) with the LCD TV, we would definitely recommend to plug all your cables into the
back of the LCD before mounting to the wall.
English - 6 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 66
15.02.2010 14:40:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see “Conditional
Access” section.
2. Video Input is used for connecting video signals of external devices.Connect
the video cable between the VIDEO IN socket on the TV and the VIDEO
OUT jack on your device.
3. Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device.
Also to enable PC/YPbPr sound connection in such a case, use an
appropriate audio cable between the connected device’s audio outputs and
the TV’s audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable
(YPbPr cable is not supplied) you should also connect your device with an
audio cable to the AUDIO INPUTS of the TV to enable audio.
4. Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to use headphones.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
English - 7 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 77
15.02.2010 14:40:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the LCD TV to a
PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
• Power off both computer and display before making
any connections.
Note: Cables shown in the illustration are not supplied.
• Use 15-pin D-sub display cable to connect a PC
to the LCD TV.Use an audio cable between audio
inputs of the TV (side) and audio output of your PC
to enable sound connection.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• When the connection is made, switch to PC source.
See “Input selection” section.
• Most DVD players are connected through
COMPONENT SOCKETS. YPbPr can be use only
when you connect a device that has a YPbPr output
through the PC input with YPbPr to PC cable. To
enable sound connection, use AUDIO IN located
side of the TV (YPbPr cable is not supplied).
•Settheresolutionthatsuitsyourviewingrequirements.
Resolution information can be found in the appendix
parts.
. When the connection is made, switch to YPbPr
source. See, “Input selection” section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
A
u
d
i
o
P
C
I
n
p
u
t
I
n
p
u
t
s
C
o
m
p
o
n
e
n
t
Y
P
b
P
r
t
o
P
C
a
u
d
i
o
S
c
a
r
t
s
o
c
k
e
t
H
D
M
I
c
a
b
l
e
(
o
p
t
i
o
n
a
l
)
i
n
p
u
t
s
i
n
p
u
t
P
C
a
u
d
i
o
c
a
b
l
e
P
C
R
G
B
c
a
b
l
e
(
n
o
t
s
u
p
p
l
i
e
d
)
(
n
o
t
s
u
p
p
l
i
e
d
)
t
o
A
U
D
I
O
I
N
P
U
T
S
t
o
P
C
i
n
p
u
t
o
n
t
h
e
T
V
D
V
D
P
l
a
y
e
r
Note: These methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
English - 8 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 88
15.02.2010 14:40:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Side AV Connectors
Inserting Batteries into the
Remote Control
• Remove the battery cover located on the back of
the by gently pulling backwards from the indicated
part.
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. For selecting
the related source, see the section “Input selection”
in the following parts.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV
Camcorder
Headphone
Note: Remove the battery from remote control when it is not
to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
Connecting Other Equipment
via Scart
Switching the TV On/Off
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to
your LCD TV by using the SCART socket. Note that
cables shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
To Switch the TV On
• Connect the power cord to the 220-240VAC, 50 Hz.
Then the standby LED lights up.
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
For more information, refer to your device’s own
instruction book.
• Press the “ ” button, -P/CH or P/CH+ button on
the TV. The TV will then switch on.
Note: If you switch on your TV via standby button on the
remote control, the programme/source that you were watching
last will be reselected.
S
c
a
r
t
s
o
c
k
e
t
By either method the TV will switch on.
To Switch the TV Off
• Press the “ ” button on the remote control or press
the “ ” switch on the TV, so the TV will switch to
standby mode.
D
e
c
o
d
e
r
D
V
D
R
e
c
o
r
d
e
r
V
i
d
e
o
R
e
c
o
r
d
e
r
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED
can blink to indicate that features such as Standby Search,
Over Air Download or Timer is active.
English - 9 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 99
15.02.2010 14:40:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with the Remote Control
Input Selection
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press “
changing sources.
or
” button on your remote control for directly
• Functions of the menu system are described in the
following sections.
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
Volume Setting
• Press “V+” button to increase the volume. Press “V-”
button to decrease the volume.Avolume level scale
(slider) will be displayed on the screen.
“
” button to highlight an input and press “ ” button
to select.
Note: You can mark desired source options by pressing the
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous programme.
• Press “P +” button to select the next programme.
OK button. Therefore, when “
” button is pressed, only
the marked source options will be available (except for the
TV source).
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10-500 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively
• Press directly the programme number to reselect
single digit programmes
Initial Settings
When the TV is turned on for the first time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!” is
displayed in all language options sequentially in the
OSD.
Note : YPbPr mode can be use only when you connect a
device that has a YPbPr output through the PC input with
YPbPr to PC cable (YPbPr cable is not supplied).
By pressing the “ ” or “ ” buttons highlight the language
you want to set and press OK button. After then, “First
time installation” OSD will appear on the screen. By
pressing “ ” or “ ” buttons, select the country you want
to set and press OK button (* for EU countries).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons of the TV
Main menu OSD cannot be displayed via control
buttons. “+/-” buttons will function as volume up/down
as default. Even if you set other functions for these
buttons, “+/-” buttons will perform as default after a
short while.
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
Volume Setting
• Press “+/-” buttons to increase or decrease volume,
so a volume level scale (slider) will be displayed
on the screen.
Programme Selection
• Press P/V/AV button once and then use “+/-” buttons
to select the next or previous programme.
AV Mode
• Hold the “P/V/AV” button, source OSD will be
displayed.
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press the “OK”
button.
Use “+/-” buttons to select the desired source.
English - 10 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1100
15.02.2010 14:40:14
Download from Www.Somanuals.com. All Manuals Search And Download.
The IDTV will automatically tune to the UHF or VHF(*) If the selected channel is locked, you must enter the
(* for EU countries) transmission channels, searching correct four numeric code to view the channel. “Enter
for digital terrestrial TV broadcasts and displaying PIN” will be displayed on the screen in such a case:
the names of channels found. This process will take
about a few minutes.
Electronic Programme Guide (EPG)
• Some, but not all, channels send information about
the current and next events. Press GUIDE button to
view the EPG menu. EPG appears on the screen. It
is able to get Information of the channel - programs
weekly by means of 7-DAY-EPG. All programs of
channels are displayed. On the bottom of the screen;
info bar, showing all the available commands, will
be displayed.
After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. The menu is
displayed to search for analogue channels.
RED button (Shrink): makes the info boxes smaller.
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
GREEN button (Expand): makes the info boxes larger.
YELLOW button (Prev. Day): displays the programmes
of previous day.
BLUE button (Next day): displays the programmes of
the next day.
For more information on this process, see “Install Menu”
section.
Note: For proper functioning of digital teletext in DTV mode, you
should set country as UK in analogue AUTO PROGRAM (for
UK broadcasts only).
INFO (Details): displays the programmes in detail.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
Do not turn off the TV while initializing first time installation.
OK : view for current broadcast/reminders for future
programs.
General Operation
P<P : jumps to the current broadcast.
Press the “
” button on the remote control and
select DTV to switch the TV set to digital terrestrial
television broadcasting.
• Press “0” button on the remote control to view Guide
Search menu. Using this feature, you can search the
programme guide database in accordance with the
genre selected or with name match.
Information Banner
• Whenever you change channel, using the P- / P+
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner at
the bottom of the screen (available only in DTV mode).
This will remain on the screen for a few seconds.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are being broadcasted with subtitles.
Press the “M” button to display the main menu, highlight
• The information banner can also be displayed at
any time while watching TV by pressing the “INFO”
button on the remote control:
the Setup and then Language menu using “ ” or “
”
button and press the OK button to display the “Language
settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use ” or “ button to set Subtitle to the
desired language.
English - 11 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1111
15.02.2010 14:40:14
Download from Www.Somanuals.com. All Manuals Search And Download.
If “Subtitle” is on and a language option is set, pressing If there is no audio available, the following warning
the “ ” button causes the following warning message message will be displayed on the screen:.
display on the screen (** for UK only):
IDTV Menu System
Press the “M” button. Main menu will be displayed.
Digital Teletext (** for UK only)
• Press the “ ” button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press “SELECT” button or similar message
appears on the screen, press the OK button.
• When the “ ” button is pressed, the TV returns to
television broadcasting.
Channel List
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
Using the “ ” or “ ” button on the remote control,
make sure that the first item, Channel List, is highlighted
and press the “OK” button to display the Channel List.
Or you press the OK button during watching DVB-T
broadcasting and get to the Channel List directly.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the “ ” button again, the digital
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the “
change screen format.
Navigating the Entire Channel List
Press “ ” or “ ” button for selecting the previous or next
channel. You can press “RED” or “GREEN” button to
move page up or page down.
” button repeatedly to
To watch a specific channel, highlight it using “ ” or “
” button and then press “OK” button, while the “Select”
item on Channel List menu is highlighted by using “
” or “ ” button.
When Auto is selected, the format being displayed is
determined by the picture being broadcasted.
PLEASE NOTE: Menu size changes depending on the
chosen image size.
Then the name and number of the selected channel will
be displayed in the top-left and top-right of the channel
display at the top-right of the screen, respectively.
Notice !
AC3 audio type is not supported. In this case, Tv
sound will be muted. If the broadcast includes AC3
stream, the following warning message will be
displayed on the screen:
Moving the channels in the channel list
• Press “ ” or “ ” buttons to select the channel that
will be moved.
• Press “ ” or “ ” buttons to select the “Move” item on
Channel List menu.
English - 12 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1122
15.02.2010 14:40:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Following OSD will be displayed next to “OK” item to
indicate that enter a number by using the numeric buttons
on the remote control and press “OK” to confirm.
Now pressing “ ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
Press the “M” button to cancel the editing or OK button
to save the new name.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order to
lock a channel you should know the parental lock
password (default value is set to 0000 in the factory
and can only be changed from the Configuration
menu).
Note: If you enter the same programme number of the channel
that you want to move, “.... channel services will be replaced.
Do you want to continue?” OSD will be displayed. Press OK
to confirm or select “No” to cancel.
Select the channel to be locked by highlighting it and
select the Lock option by pressing “ ” or “ ” button.
When the “OK” button is pressed, a dialog OSD asking
for the password will be displayed.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel that
will be deleted.
• Press “ ” or “ ” button to select the “Delete’’ item
on Channel List menu.
• Press the “OK” button to delete the highlighted
channel in the channel list. Then the message below
appears on the screen:
Enter the password by using the numeric buttons on
the remote control. The lock icon “ ” will now be
displayed next to the selected channel. Repeat the
same operation to cancel the lock.
• Press “ ” or “ ” button to highlight the desired
option. If “OK” button is pressed while “Yes” is
highlighted, the highlighted channel is deleted.
Selecting “No” cancels the deletion.
Setting Favourites
To set a favourite you should highlight the “Favourites”
item at the bottom of the Channel List menu. Then
press “OK” button and Edit Favourite List menu
appears on the screen.
Renaming Channels
To rename a specific channel, the channel must
be highlighted by pressing “ ” or “ ” button. Then
highlight the Edit Name item by pressing “ ” or “
”
button as illustrated below. Press the “OK” button to
activate the rename feature.
How to Add a Channel to a Favourites List
• By pressing “ ” or “ ” buttons, highlight the channel
that you want to add to the favourite list.
• By pressing “OK” button, the highlighted channel is
added to the Favourite List.
English - 13 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1133
15.02.2010 14:40:15
Download from Www.Somanuals.com. All Manuals Search And Download.
• F icon indicates that a channel is added to Favourite You can save the adjustments by pressing the GREEN
List.
key or cancel the process by pressing the RED button.
You can edit the list via GREEN key and delete with
the RED button.
Removing a Channel from Favourite List
• Highlight the channel that you want to remove from
the favourite list and press OK button to remove.You
can press “OK” button again to re-add a channel.
Conditional Access
• Press the “M” button to display the main menu and
use the “ ” or “ ” button to highlight the “Conditional
Access” line and press the “OK” button:
• To activate Favourites, go to the Configuration menu
and select Favourite mode. Use “ ” / “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
On Screen Help
Some Digital Terrestrial channels operate on a Pay
Per View basis. These require a subscription and a
hardware decoder.
For all menus, press the INFO button to display the
help information about the menu functions.
Obtain the Conditional Access Module (CAM) and the
viewing card by subscribing to a pay channel company,
then insert those to the TV using the following procedure.
Programme Guide
• Switch off the TV and unplug from the mains.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
• Connect theTV to the mains supply, switch on and then
wait for few moments until the card is activated.
Timers
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Conditional
Access then pressing the “OK” button. (CAM set up
menu is not displayed when it is not required.)
• To see the viewing contract information: enter IDTV;
press the “M” button, then highlight ConditionalAccess
and press the “OK” button.
• When no module is inserted, “No Conditional Access
module detected” message appears on the screen.
• Refer to the module instruction manual for details of
the settings.
Note: Insert or remove the CI module only when the TV is in
STANDBY mode or disconnected from the mains.
To display timers window, activate the item from the
main menu. To add a timer, press the YELLOW button
on the remote control. Then “Add Timer” window
appears.
TV Setup
You can use this item to display the TV functions.
Mode: Selects channel list mode.
The digital TV Setup menu screen is accessed from the
mainmenu. Pressthe“M”buttontodisplaythemainmenu
anduse“ ”or“ ”buttontohighlight“TVSetup”, pressthe
“OK” button to display TV Setup menu screen.
Channel: “ ” or “ ” keys will navigate the user
through the TV or Radio list.
Date: Starting date is entered via the Left/Right and
the numeric buttons.
Start: Starting time is entered via the Left/Right and
the numeric buttons.
You can find detailed information for all menu items in
“Analogue TV Menu System” section.
End: Ending time is entered via the Left/Right and
the numeric buttons.
Setup
Duration: Duration between Start and End time.
The adjustments in this menu are given as the following:
Repeat: You can set a timer to be repeated as Once,
Daily or Weekly.
Change/Delete: permits or prohibits any modifications
for other users.
English - 14 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1144
15.02.2010 14:40:16
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Receiver Upgrade
You can configure the settings of your TV. Select
Configuration from Setup menu and press “OK” to
view this menu. Press the “EXIT” button on the remote
control to exit.
Over Air Download (OAD)
This featture heellps to kkeep yyoour TV uupdatteed. It wworks
automaaticallly andd searcches foor new iinformmation
when avvailablle. Nottee that thhis settting is iinactiive to be
modified. Please ensure that the TV is set to standby
mode. The TV automatically powers up at 3.00 A.M.
each day and searches for any new information which
may be broadcasted and will download this to your
receiver automatically. This operation will normally
take approximately 30 minutes.
Note: Your TV may start in First Time Installation mode after
OAD update.
Parental Control
Use “ ” or “ ” buttons to go to Parental Lock option.
Press OK button to enter the menu. A dialog box
asking for the lock key will be displayed. The key is set
to “0000” initially. Enter PIN. If it is incorrect, “Wrong
Pin” OSD will be displayed. If it is correct, the Parental
Control menu will be displayed:
Dolby D Digital (* for EU countries only)
(Optional)
In the Configuration Menu, highlight the Dolby D item by
pressing “ ” or “ ” buttons. Use the “ ” or “ ” buttons
to set the Dolby D Digital as On or Off. If the channel that
you are watching supports Dolby Digital,you can turn this
setting on.
Hard of Hearing (* for EU countries only)
Use “ ” or “ ” button to select Hard of Hearing and
then press “ ” or “ ” button to set this setting as
On or Off.
Maturity Lock (*)
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
(*) If you set Country option as UK in the first time
installation, Maturity Lock option will not be visible.
This setting is available only for EU countries.
Favourite Mode
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
does not show video-audio.
Use this function to enable or disable favourite
mode. Press “ ” / “ ” button to set this function as
on or off.
Menu Lock
Channel List
In menu lock you can set locking for all menus, or the
Installation Menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system. Use “ ” or “ ” buttons to go to
Menu Lock option. Use “ ” or “ ” buttons to choose
Menu Lock Mode.
Use “ ” or “ ” buttons to go to Channel List option.
Use “ ” or “ ” buttons to toggle Channel List Mode.
If you select “TV Only”, with the “ ” or “ ” buttons,
you navigate through only TV channels. If you select
“Radio Only”, with the “ ” or “ ” buttons, you navigate
through only radio channels. If you select “Text Only”,
with the “ ” or “ ” buttons, you navigate through only
text channels.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with
the correct lock key. So the user cannot add, delete,
rename, channels, cannot set timers.
Scan Encrypted
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
setting is on, search process will locate the encrypted
channels as well. If it is set as OFF manually, encrypted
channels will not be located while in automatic search
or manual search.
INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels. Changes will be
updated after exiting ‘Configuration Menu’.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option.
Press “OK” to display the “Set PIN” window. Use
numeric buttons to enter new pin number you will need
to input your new pin a second time for verification
purposes.The factory default pin number is 0000, if
Use “ ” or “ ” button to select Scan Encrypted and
then press “ ” or “ ” button to set this setting as
On or Off.
English - 15 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1155
15.02.2010 14:40:16
Download from Www.Somanuals.com. All Manuals Search And Download.
you change the pin number make sure you write it
down and keep it safe.
Relative Volume (Optional)
Using this option, the Audio Description volume level
can be increased or decreased relatively, according
to the general volume.
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Time Settings (Optional)
Use “ ” or “ ” button to select Standby Search and
then press “ ” or “ ” button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.
In the configuration menu, highlight the Time Settings
item by pressing “ ” or “ ” buttons.
Press “OK” and Time Settings sub menu will be
displayed on the screen. Current Time,Time Zone To use Standby search please make sure that
Setting and Time Zone will be available.
you select Standby Search as On.
Use “ ” or “ ” buttons to highlight the Time Zone
Language
Setting. Time Zone Setting is set using “ ” or “
buttons. It can be set to AUTO or MANUAL.
”
In this menu the user can adjust the preferred
language. Language is changed by pressing “OK”
button.
WhenAUTO is selected, Current Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone Setting, Time
Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to the
selected Time Zone.
Audio Description (Optional)
Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,
describing what is happening on the screen during the
natural pauses in the audio (and sometimes during
dialogue, if deemed necessary). You can use this
feature, only if the broadcaster supports that additional
narration track. Use “ ” or “ ” buttons to select an
item. Then use “ ” or “ ” buttons to set.
(Optional)
Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
• Audio: by pressing “ ” or “ ” keys change the
audio language.
• Subtitle: alter the subtitle language with “ ” or “
” keys. The chosen language will be seen in
subtitles.
Audio Description (Optional)
This function enables or disables the audio description
feature by pressing the “ ” or “ ” buttons.
Movie Subtitle (Optional)
• In order to display subtitles properly, use this setting
to select a movie subtitle language.
Preferred Language (Optional)
• By pressing “ ” or “ ” button, select the desired
language option.
By pressing the “ ” or “ ” buttons the preferred audio
description language is being changed.
• Guide: By pressing “ ” or “ ” buttons change the
guide language.
This setting can be used, only if it is available.
English - 16 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1166
15.02.2010 14:40:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Current
Automatic Channel Scan
• Audio: if audio language is supported change the
audio language by pressing “ ” or “ ” buttons
Automatic channel scan is started by pressing
“OK” button while Automatic channel scan item is
highlighted.
• Subtitle: if subtitle is backed up, alter the subtitle
language with “ ” or “ ” buttons. The chosen
language will be seen in subtitles.
The following message appears on the screen:
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will function
as described below:
Language Settings
Highlight Yes or No by using “ ” or “ ” buttons and
press “OK” button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
In the configuration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
“OK” and Language Settings submenu will be
displayed on the screen:
Press the “OK” button to search for analogue
channels. The following menu appears on the screen
for analogue channel search:
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes:
• System Language determines the on-screen menu
language.
•Audio Language is used for selecting the soundtrack
of channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in the most efficient way.
Select Installation from the Configuration menu by
pressing “ ” or “ ” buttons.
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
“OK” or RED button to continue. To cancel, press
BLUE button. The following menu will be displayed
during the automatic tuning:
This menu includes the following items:
(*) For Denmark, Sweden, Norway or Finland.
AfterAPS is finalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
English - 17 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1177
15.02.2010 14:40:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the “OK” button to start installation.After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen.This process is same as described in
Automatic Search section..
Channel Search
In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For each valid channel number, signal
level and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Analogue TV Menu System
Picture Menu
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “ ” or “
”
button to select Clear Service List and then press OK. The
following OSD message will be displayed on the screen:
Highlight NO and press OK to cancel. Select Yes by
pressing “ ” or “ ” button and press OK to delete all
of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
Mode
To install factory settings, highlight “First Time
Installation” menu item and press “OK” button, then
you will be asked whether or not to delete the settings.
Selecting “Yes” by pressing “OK” button while “Yes” is
highlighted will delete the existing channel table.
For your viewing requirements, you can set the related
mode option.
Press “ ” or “ ” button to select Mode. Press “
or “ ” button to choose from one of these options:
Natural, Cinema and Dynamic.
”
Then you will be asked to confirm for deleting all
channels and settings:
Contrast/Brightness/Sharpness/Colour/
Hue
Press “ ” or “ ” button to select the desired option.
Press “ ” or “ ” button to set the level.
Note: Hue option can only be visible when the TV receives
an NTSC signal.
By selecting Yes and pressing the “OK” button, the
existing channel table will be deleted. After factory
settings are loaded, “First Time Installation” menu
will be displayed.
Colour Temp
Press “ ” or “ ” button to select Colour Temp.
Press “ ” or “ ” to choose from one of these options:
Normal, Warm and Cool.
The menu which is displayed for language selection
appears on the screen at first. By using “ ” or “
”
Note:
buttons, select the desired language option, and press
OK button to activate.
• For normal colours, select Normal option.
• Setting Warm option gives white colours a slight red
stress.
Afterwards “First time installation” OSD will appear
on the screen. By pressing “ ” or “ ” buttons, select
the Country you want to set and press “OK” button
(* only for EU countries).
• Setting Cool option gives white colours a slight blue
stress.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
English - 18 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1188
15.02.2010 14:40:18
Download from Www.Somanuals.com. All Manuals Search And Download.
Press “ ” or “ ” button to select Noise Reduction. Volume
Press “ ” or “ ” to choose from one of these options:
Low, Medium, High or Off.
Press “ ” or “ ” button to select Volume. Press “
or “ ” button to change the level of the Volume.
”
Film Mode
Equalizer
Films are recorded at a different number of frames per
second to normal television programmes.
Press “ ” or “ ” button to select Equalizer. Press
” button to view equalizer menu.
“
Press “ ” or “ ” button to select Film Mode.
Press “ ” or “ ” button to set this feature On or Off.
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
Game Mode (optional)
Select Game Mode by pressing “ ” or “ ” button.
Use “ ” or “ ” button to set Game Mode as On or
Off. When Game Mode is set to On, specific game
mode settings, which are optimized for better video
quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness,
Colour and Colour Temp settings will be invisible and
disabled while Game Mode is on.
Press “ ” or “ ” button to change the preset. In
equalizer menu, the preset can be changed to Flat,
Classic, User, Music, Movie and Speech.
Note:
Picture mode selection button on the remote control will have
no function while Game Mode is on.
Select the desired frequency by pressing “ ” or “
”
Picture Zoom
button and increase or decrease the frequency gain
by pressing “ ” or “ ” button.
Select Picture Zoom by pressing “ ” or “ ” button.
Press the “M” button to return to the previous menu.
Use “ ” or “ ” buttons, to change picture zoom to
Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Subtitle
or Zoom.
Note: Equalizer menu settings can be changed only when
the Equalizer Mode is in User.
Balance
Store
This setting is used for emphasizing left or right
speaker balance.
Press “ ” or “ ” button to select Store. Press “
or OK button to store the settings. “Stored...” will be
”
displayed on the screen.
Press “ ” or “ ” button to select Balance. Press “
” or “ ” button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
Reset
Press “ ” or “ ” button to select Reset. Press
“
” or “ ” or OK button to reset the picture modes to
Headphone
factory default settings.
Press “ ” or “ ” button to select Headphone. Press
Sound Menu
“
” button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press “ ” or “ ” button to select Volume. Press
“
“
” button to increase headphone volume level. Press
” button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63.
Sound Mode
Press “ ” or “ ” button to select Sound Mode. Using
“
” or “ ” button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
English - 19 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 1199
15.02.2010 14:40:18
Download from Www.Somanuals.com. All Manuals Search And Download.
AVL
Default Zoom
Automatic Volume Limiting (AVL) function adjusts the While zoom mode is set as AUTO, the TV will set
sound to obtain fixed output level between programmes the zoom mode in accordance with the signal of
(For instance, volume level of advertisements tend to the broadcast. If there is no WSS or aspect ratio
be louder than programmes).
information, the TV will then use this setting to adopt.
Press “ ” or “ ” button to select Default Zoom. You
can set Default Zoom to 16:9, 4:3, Panoramic or
Press “ ” or “ ” button to select AVL. Press “ ” or
“
” button to set the AVL as On or Off.
14:9 by pressing “ ” or “ ” button.
Store
Blue Background
Press “ ” or “ ” button to select Store. Press “
”
or OK button to store the settings. “Stored...” will be If the signal is weak or absent, the TV will automatically
displayed on the screen.
change to a blue screen. To enable this, set Blue
Background to On.
Feature Menu
By pressing “ ” or “ ” button, select Blue
Background. Press “ ” or “ ” button to set Blue
Background as On or Off.
Menu Background
Press “ ” or “ ” button to select Menu Background.
You can set menu background level by pressing
“
” or “ ” button.
Menu Timeout
To set a specific display timeout for menu screens,
set a value for this option.
Press “ ” or “ ” button to select Menu Timeout. Use
“
” or “ ” button to change menu timeout to 15 sec,
30 sec or 60 sec.
TXT (Teletext) Language
Press “ ” or “ ” button to select Teletext Language.
Use “ ” or “ ” button to change Teletext Language to
West, East, Cyrillic, Turk/Gre, Arabic or Persian.
Sleep Timer
Press “ ” or “ ” button to select Sleep Timer. Use
“
” or “ ” button to set the Sleep Timer.
HDMI PC Full Mode (optional)
The timer can be programmed between Off and 2
hours (120 minutes) in steps of 10 minutes.
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Note: If you connect an HDMI device and switch the TV to
HDMI mode, this feature will be visible (except for 480p/576p
resolution).
Press “ ” or “ ” button to select Child Lock.
Use “ ” or “ ” button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled Full Mode (optional)
by the remote control. In this case the control panel
If you connect a device via HDMI or YPbPr connectors
buttons will not work, except for the Standby/On
button. When Child Lock is activated you are able to
switch the TV into Standby mode with the Standby/
On button. To switch the TV on again, you need the
remote control.
and set 1080i/1080P resolutions, Full Mode item will
be visible.You can set Full Mode as 1:1 or Normal
by using “ ” or “ ”.If you select 1:1, screen ratio will
be adjusted correctly. If you set Normal, screen ratio
may expand.
Hence, if one of those buttons is pressed, Child Lock
Is On will be displayed on the screen when the menu
screen is not visible.
Ext Out
Press “ ” or “ ” button to select Ext Out. Use “ ” or
“
” button to set the Ext Out as On or Off.
Language
Note:
Press “ ” or “ ” button to select Language. Use “
or “ ” button to select the Language.
”
For copying from a DVD or VCR device, you should choose
desired source from source menu and turn “On” to EXT Out
from feature menu.
English - 20 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2200
15.02.2010 14:40:19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ext Out should be On in order to use Timers function in the
DTV mode.
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Install Menu
Program
Colour System
Press “ ” or “ ” button to select Program. Use “
”
Press “ ” or “ ” button to select Colour System.
or “ ” button to select the program number. You can Use “ ” or “ ” button to change the colour system to
also enter a number using the numeric buttons on the AUTO, PAL, SECAM, PAL60, NTSC 4,43 or NTSC
remote control. There are 200 programme storage 3,58.
between 0 and 199.
Store
Band
Press “ ” or “ ” button to select Store. Press “ ” or
Band can be selected either C or S. Press “ ” or “OK” button to store the settings. “Stored...” will be
“
” button to set Band.
displayed on the screen.
Channel
Program Table
Channel can be changed by “ ” or “ ” button or Select Program Table by pressing “ ” or “ ” button.
numeric buttons.
Press “ ” to display Program Table:
Colour System
Press “ ” or “
”
button to select Colour System.
Use “ ” or “ ” button to change the colour system to
AUTO, PAL, SECAM or PAL60.
Sound System
Press “ ” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound system
to BG,DK, I, L or L’.
Fine Tune
Press “ ” or “ ” button to select Fine Tune. Press “
” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “
”
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
or “ ” button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Store
Press “ ” or “ ” button to select Store. Press “
or OK button to store the settings. “Stored...” will be
”
Name
displayed on the screen.
To change the name of a programme, select the
programme and press the RED button.
English - 21 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2211
15.02.2010 14:40:20
Download from Www.Somanuals.com. All Manuals Search And Download.
The first letter of the selected name will be highlighted.
Press “ ” or “ ” button to change that letter and “
or “ ” button to select the other letters. By pressing
Source Menu
Select the sixth icon by pressing “ ” or “ ” button.
”
Source menu appears on the screen:
the RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
In source menu, highlight a source by pressing “
”
APS (Auto Programming System)
or “ ” button and switch to that mode by pressing “
” button. Source options are; TV, DTV, EXT-1, FAV,
HDMI, YPbPr and PC-VGA.
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
With the OK button you can set or remove a mark.
When a mark is removed; this source does not appear
in the OSD when you press the AV / Source button of
the remote control.
Note: Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.
Note: YPbPr mode can be use only when you connect a
device that has a YPbPr output through the PC input with
YPbPr to PC cable (YPbPr cable is not supplied).
PC Mode Menu System
See “Connecting the LCD TV to a PC” section for
connecting a PC to the TV set.
For switching to PC source, press “
” button on your
remote control and select PC input. You can also use
Press “ ” or “ ” button to select your country. If you
“Source” menu to switch to PC mode.
want to exit from A.P.S. function, press the BLUE button.
Note that PC mode menu settings are available only while
the TV is in PC source.
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
PC Position Menu
Select the first icon by pressing “ ” or
“
” button. PC Position menu appears on the screen:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.
English - 22 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2222
15.02.2010 14:40:20
Download from Www.Somanuals.com. All Manuals Search And Download.
Autoposition
Displaying TV Information
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
“INFO” button is pressed.
Select Autoposition item by using “ ” or “ ” buttons.
Press “OK” or “ ”, “ ” button.
When you are in DTV Mode and press “Up” or
“Down” button, the Information of the previous or next
programme is displayed. To switch to the displayed,
programme just press OK button.
Warning: Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
Mute Function
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Press “ ” button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
Select H Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
To cancel mute, there are two alternatives; the first
one is pressing the “ ” button and the second one
is increasing the volume level.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
Picture Mode Selection
By pressing PP button, you can change Picture
Mode settings in accordance with your viewing
requirements.Available options are Dynamic, Natural
and Cinema.
Select V Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Note: This feature cannot be set while in PC mode.
Freezing Picture
You can freeze the picture on the screen by pressing
the “OK” button on the remote control. Press the
“OK” button to freeze picture. Press again to quit
freeze mode.
Select Phase item by using “ ” or “ ” buttons. Use
“
” or “ ” button to adjust the value.
Dot Clock
Note: This feature will not be available while in PC
mode or watched movie from DVI source .
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Zoom Modes
You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
Select Dot Clock item by using “ ” or “ ” buttons.
Use “ ” or “ ” button to adjust the value.
Press “
mode.
” button to directly change the zoom
PC Picture Menu
For adjusting PC picture items, do the following:
Available zoom modes are listed below.
Press “ ” or “ ” button to select the second icon. PC
Picture menu appears on the screen.
Note:
In YPbPr and HDMI modes, while in 720p-1080i resolutions,
only 16:9 mode is available.
Contrast, Brightness, Colour and Colour
Temperature settings in this menu are identical to
settings defined in TV picture menu under “Analogue
TV Menu System”.
Zoom mode cannot be changed while in PC mode.
Auto
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
Note: If you set Colour Temp as User, you can define R, G,
B settings manually.
Sound,Feature and Source settings are identical to the
settings explained in Analog Tv menu system.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
English - 23 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2233
15.02.2010 14:40:21
Download from Www.Somanuals.com. All Manuals Search And Download.
16:9
Teletext
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen
Teletext system transmits information such as news,
sports and weather on your TV. Note that if the signal
degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
.
Teletext function buttons are listed below:
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
“
” Teletext On-Off / PAT Mode
Activates teletext mode when pressed once. Pressing
this button again will split the screen into two windows,
one displaying the teletext and the other displaying
the current channel. Pressing again will quit the
teletext mode.
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original size
“
” Index
Selects the teletext index page.
.
“
” Subcode Pages
Panoramic
Selects subcode pages if available when the teletext
is activated. When the teletext is not activated,
displays time info if the programme has teletext
transmission.
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen. The top and
bottom of the picture are slightly cut off.
“
” Reveal
Shows hidden information (e.g. solutions of games).
“
” Expand
14:9
Press once to enlarge top half of the page, press again
to enlarge the bottom half of the page. Press again to
revert back to normal size.
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
“
” Mix
Places the teletext screen over the programme.
“
” Hold
Cinema
Holds a text page when convenient. Press again to
resume.
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
P+ / P- and numbers (0-9)
Press to select a page.
Note: Most TV stations use code 100 for their index pages.
Coloured Buttons
Subtitle
(RED/GREEN/YELLOW/BLUE)
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.
When FASTEXT system is available, sections in a
teletext page will become colour-coded and can be
selected by pressing the coloured buttons. Press
a coloured button that corresponds to with your
needs.
Zoom
This option zooms to the picture.Note: You can shift
to screen up or down by pressing “ ” / “ ” buttons
while picture zoom is selected as panaromic, 14:9,
Cinema or Subtitle.
The coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing P - or P+ commands will request
the next or previous page respectively.
English - 24 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2244
15.02.2010 14:40:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Image Persistence
Please note that ghosting may occur while displaying
a persistent image. LCD TVs’ image persistence may
disappear after a short time. Try turning off the TV for
a while. To avoid this, do not leave the screen in still
picture for extended periods.
No Power
If your TV system has no power, please check the
main power cable and connection to the mains
socket outlet.
Poor Picture
Have you selected the correct TV system? Is your TV
set or house aerial located too close to a non-earthed
audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune the
channels. The picture quality may degrade when two
peripherals are connected to the TV at the same time.
In such a case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
cable damaged? Are suitable plugs used to connect
the aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving a
transmission. Have you selected the correct button on
the remote control? Try once more. Also make sure
the correct input source has been selected.
Sound
You can not hear any sound. Did you perhaps interrupt
the sound, pressing the “ ” button?
Sound is coming from only one of the speakers. Is the
balance set to one extreme? See Sound Menu.
Remote Control
Your TV no longer responds to the remote control.
Perhaps the batteries are exhausted. If so you can still
use the local buttons at the right of the TV.
Input Sources
If you cannot select an input source, it is possible that
no device is connected.
Check theAV cables and connections if you have tried
to connect a device.
English - 25 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2255
15.02.2010 14:40:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: PC Input Typical Display Modes
The display has a maximum resolution of 1600 X 1200. The following table is an illustration of some of the
typical video display modes.
Your TV may not support different resolutions. Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Resolution
Frequency
Index
Standard
Hor
Hor
Ver
Ver (Hz)
(KHz)
31.5
37.9
37.5
35.2
37.9
43.8
48.1
46.9
49.7
48.4
56.5
57.7
60.0
64.2
67.5
68.9
47.7
47.7
60.0
64.0
80.0
75.0
1
2
640
640
480
480
480
600
600
600
600
600
624
768
768
768
768
864
864
870
768
768
960
1024
1024
1200
60
72
75
56
60
70
72
75
75
60
70
72
75
70
75
75
60
60
60
60
75
60
VESA
VESA
VESA
VESA
VESA
3
640
4
800
5
800
6
800
7
800
VESA
VESA
MAC
8
800
9
832
10
11
12
13
14
15
16
17
18
19
20
21
22
1024
1024
1024
1024
1152
1152
1152
1280
1366
1280
1280
1280
1600
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
Information for Users on Disposal of old Equipment and
Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Battery
Notice: The sign Pb below the symbol for batteries indicates that this battery
contains lead.
Products
English - 26 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2266
15.02.2010 14:40:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: AV and HDMI Signal Compatibility (Input Signal
Types)
Source
Supported Signals
PAL 50/60
NTSC 60
RGB 50
RGB 60
PAL 50/60
NTSC 60
480I
Available
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
EXT-1
(SCART)
FAV
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
24Hz
25Hz
480P
576I
576P
720P
YPbPr
720P
1080I
1080I
1080P
1080P
480I
480P
576I
576P
720P
720P
HDMI1
1080I
1080I
1080P
1080P
1080P
1080P
1080P
30HZ
50HZ
60HZ
(X: Not Available, O: Available)
Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an
inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such
a problem please contact your dealer and also the manufacturer of the source equipment.
English - 27 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2277
15.02.2010 14:40:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile
for UK
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Digital
Reception
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
NUMBER OF PRESET CHANNELS
CHANNEL INDICATOR
200
On Screen Display
75 Ohm (unbalanced)
220-240V AC, 50 Hz.
German+Nicam Stereo
2 x 2,5
RF AERIAL INPUT
OPERATING VOLTAGE
AUDIO
AUDIO OUTPUT POWER (WRMS.) (10% THD)
POWER CONSUMPTION (W)
45 W (max)
< 1 W (Standby)
19” wide display
PANEL
DIMENSIONS (mm)
DxLxH (With foot):
Weight (Kg):
155 x 460 x 354
4,15
DxLxH (Without foot):
Weight (Kg):
70 x 460 x 315
4,00
English - 28 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2288
15.02.2010 14:40:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Instruction
For your own safety read following instruction carefully before attempting to connect this unit to the mains
supply.
MAINS (AC) OPERATION
The wires in the mains lead are coloured in accordance with the following code :
GREEN
FUSE
&
YELLOW
(Earth)
(if there is earth cable)
BROWN
(Live)
BLUE
(Neutral)
IMPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E, or by the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue or black must be connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured brown or red must be connected to the terminal which is marked with the
letter L or coloured Red.
For continued protection against risk of fire, replace only with same type and rating of fuse (ASTA
approved 5A 250VAC fuse).
Note: Earth connection is used only for class I applications.
This symbol means this appliance is a class II appliance and therefore, an earth connection is
not required.
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT
ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.
English - 29 -
MB45_[GB]_1205UK_IDTV_BRONZE11_19882W_1006696644__5500116644998888..iinndddd 2299
15.02.2010 14:40:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|