System Component
Operating Instructions
Model No. SC-EH760
SC-EH560
The illustrations show SC-EH760 for areas except Australia and N.Z.
Note
The “EB” indication shown on the outside packing
case indicates United Kingdom.
Before connecting, operating or adjusting this prod-
uct, please read these instructions completely.
Please keep this manual for future reference.
EB EP GN
RQT5355-B
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Safety precautions
Before use
Placement
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . 13
Caution for AC Mains Lead. . . . . . . . . . . . . . . . . 14
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic connections. . . . . . . . . . . . . . . . . . . . . . . . 16
Optional antenna connections . . . . . . . . . . . . . . 17
Front panel controls . . . . . . . . . . . . . . . . . . . . . . 18
The remote control . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning DEMO off . . . . . . . . . . . . . . . . . . . . . . . . 11
Saving power in the standby mode . . . . . . . . . . 11
Set the system up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Bforuse
Basic operations
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
The radio: manual tuning. . . . . . . . . . . . . . . . . . 16
The radio: preset tuning . . . . . . . . . . . . . . . . . . 17
Cassette tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AC mains lead protection
Ensure the AC mains lead is connected correctly and not dam-
aged. Poor connection and lead damage can cause fire or electric
shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Changing sound field and quality
Changing sound field and quality . . . . . . . . . . . 20
Using the manual equalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the acoustic image equalizer (3D AI EQ) . . . . . . . . . . . . 21
Do not handle the plug with wet hands. This can cause electric
shock.
Boosting the super woofer . . . . . . . . . . . . . . . . . 21
Enjoying surround sound . . . . . . . . . . . . . . . . . . 22
6CH DISCRETE INPUT [SC-EH760] . . . . . . . . . . . . . . . . . . . . . 24
DOLBY PRO LOGIC [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . 25
VIRTUAL DOLBY SURROUND [SC-EH560] . . . . . . . . . . . . . . . 26
SUPER SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . 26
SIMULATED STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Surround effects . . . . . . . . . . . . . . . . . . . . . . . . . 27
CENTER FOCUS [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . . . 27
VIRTUAL REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . 27
MULTI REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . 27
3D ENHANCED SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . 27
CENTER EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SURROUND EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . 28
SEAT POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Do not spray insecticides onto or into the unit. They contain flam-
mable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead
and contact your dealer or an authorized service center. Electric
shock or damage to the unit can occur if the unit is repaired, disas-
sembled or reconstructed by unqualified persons.
Recording operations
Before recording (Deck 2 only) . . . . . . . . . . . . . 30
Recording CDs . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Recording the radio . . . . . . . . . . . . . . . . . . . . . . 33
Tape-to-tape recording . . . . . . . . . . . . . . . . . . . . 33
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Timer operations
Using the timers . . . . . . . . . . . . . . . . . . . . . . . . . 34
Convenient functions
Changing the sound range display . . . . . . . . . . 37
Muting the volume. . . . . . . . . . . . . . . . . . . . . . . . 37
Using headphones (not included) . . . . . . . . . . . 37
External unit connections . . . . . . . . . . . . . . . . . 38
Using other equipment . . . . . . . . . . . . . . . . . . . . 39
Enjoy karaoke with CDs and cassettes
(for Australia and N.Z. only) . . . . . . . . . . . . . . 40
Reference
Technical specifications . . . . . . . . . . . . . . . . . . . 41
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 42
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL n OR
COLOURED GREEN OR GREEN/YELLOW.
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark m or the BSI mark o on
the body of the fuse.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
Bofruse
How to replace the fuse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
1. Open the fuse cover with a screwdriver.
A replacement fuse cover can be purchased from
your local dealer.
Figure A
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUIT-
ABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE RE-
MOVED AND THE PLUG CUT OFF AND DIS-
POSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRI-
CAL SHOCK IF THE CUT OFF PLUG IS IN-
SERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
Figure B
Fuse cover
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accor-
dance with the following code:
Blue: Neutral, Brown: Live.
2. Replace the fuse and close or attach the fuse
cover.
As these colours may not correspond with the col-
oured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or col-
oured Black or Blue.
Figure A
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or col-
oured Brown or Red.
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
4
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
A
Locating the components
[A] Side-by-side set-up
[B] Stacking
CD changer
(SL-EH760) or
CD player
Sound processor
(SH-EH760/560)
(SL-EH560)
Note
³Do not put the CD changer or CD player on the tuner amplifier. Heat
from the tuner amplifier can damage your CDs.
³Left and right front speakers are exactly the same.
Front speaker (L)
(SB-EH760/560)
Cassette deck Tuner amplifier Front speaker (R)
(RS-EH760) (SA-EH760/560) (SB-EH760/560)
Use only the supplied speakers.
The combination of the system and the speakers provides the best
sound. Using other speakers can damage the unit and sound quality
will be negatively affected.
Bforuse
B
Caution
³Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.
Sound processor
(SH-EH760/560)
Tuner amplifier
(SA-EH760/560)
CD changer (SL-EH760) or
CD player (SL-EH560)
³Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
Cassette deck
(RS-EH760)
Placement of center/surround
speakers SC-EH760
C
»
C
a
Center speaker
(SB-PC75)
Center speaker
Front speaker (right)
(SB-EH760)
Place the center speaker (a) directly above the television.
Front speaker (left)
(SB-EH760)
Surround speakers
30° 30°
120°
Front view
Front view
Listening
position
Place the surround speakers (b, c) either side of the listening posi-
tion, or slightly to the rear, about 1 meter higher than ear level.
Place the speakers with the Technics logo facing toward the listening
position.
b
Surround
c
Surround
However the position should be adjusted to your personal prefer-
ence, because the effect varies to some degree depending upon the
type of music and the music source.
speaker (left)
(SB-PS75)
speaker (right)
(SB-PS75)
¤The front, center, and surround speakers should be
placed at approximately the same distance from the lis-
tening position. The angles in the diagram are approxi-
mate.
Note
If you are unable to position the surround speakers as recommend-
ed, you can put them near the front speakers and still achieve a sur-
round-like effect (➡ page 27, “VIRTUAL REAR SURROUND”).
[D] Attaching to a wall
Set speaker onto screws and slide through bracket to lock into posi-
tion.
D
Note
100 mm
The wall or pillar on which the speaker systems are to be attached
should be capable of supporting 5 kg.
If irregular coloring occurs on your television
Turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
30–35 mm
Ø7.5~9.5
7–9 mm
5
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic connections
Adhesive tape
2
B1
Bofruse
3
5
(Left)
1
1
B2
A1
1
(Right)
4
3
To household
mains socket
6
4
(Left)
5
(Right)
The illustrations show SC-EH760 for areas except Australia and N.Z.
Tuner amplifier side
A
4
3
2
+
-
1
1
Gray (i)
1
HIGH
MID
L
LOW
HIGH
MID
R
To connect cables To unplug cables
LOW
Hold the connector
Blue
(i)
from both ends
and pull it out.
Connector
Red
(i)
2
(For Australia and N.Z.)
Black (j)
White
line
Speaker side
2
HF
MF
LF
Gray (i)
(For Australia and N.Z.)
2
Blue
(i)
FM ANT
75∞
GND
Red
(i)
1
Black (j)
(For others)
(For others)
6
Connector
Appliance
inlet
75∞
FM ANT
Approx. 6 mm
6
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional antenna
connections
Before connection
Use outdoor antennas if radio reception is poor.
³Do not connect the AC mains lead until all other connections
are complete.
³To prepare the AM loop antenna and speaker cables (and
FM antenna for Australia and N.Z.), twist the vinyl tip and pull
off ([A]).
FM outdoor antenna
Note
³Disconnect the FM indoor antenna.
³The antenna should be installed by a competent technician.
1 Flat cables.
Keep the cables as flat as possible against the back of the
unit.
FM outdoor antenna
Note
Connect the black connectors to the black terminals and the
blue connector to the blue terminal. Incorrect connection of the
flat cables can damage the unit.
Bforuse
Tuner amplifier
A
2 FM antenna.
Fix the other end of the antenna where reception is best.
(For Australia and N.Z.)
A
FM ANT
∞
75
3 AM loop antenna.
1 Attach the antenna holder to the rear panel of the CD
changer or CD player.
GND
AM ANT
LOOP
EXT
Then clamp the antenna into the antenna holder.
2 Connect the antenna terminal to the rear panel of the tuner
amplifier.
1 Remove a piece of the outer vinyl
insulator.
Keep loose antenna cord away from other wires and cords.
4 Front (L/R) speaker cables.
30mm
Connect the cables to the terminals of the same color.
2 Twist the shield braid to expose the
Note
core wire.
³To prevent damage to circuitry, never short-circuit positive
(i) and negative (j) speaker wires.
³Be sure to connect only positive (red, blue or gray) wires to
positive (i) terminals and negative (black) wires to negative
(j) terminals.
15mm
Shield braid
Core wire
(For others)
5
[SC-EH760]
∞
75
A
Surround and center speaker cables.
FM ANT
AM ANT
LOOP
EXT
(For United Kingdom only)
75 - coaxial cable
(not included)
BE SURE TO READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 4 BEFORE PRO-
CEEDING TO STEP 6.
(United Kingdom only)
Use the antenna
plug adaptor
(included).
6 AC mains lead.
Insertion of connector
AM outdoor antenna
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing.
Run a piece of vinyl wire horizontally across a window or other con-
venient location.
However there is no problem using the unit.
Note
Note
³Leave the loop antenna connected.
³Disconnect the antenna when the unit is not in use. Do not use the
antenna during an electrical storm.
The included AC mains lead is for use with this unit only. Do not use it
with other equipment.
For your reference:
Information you enter into the unit’s memory, except for time, remains
intact for up to two weeks after the mains lead is disconnected.
AM outdoor antenna
5–12m
Tuner
AM ANT
LOOP
EXT
amplifier
7
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel controls
A
SC-EH760
1 2 3 45 67 8 9
: ;
A
»
Tuner amplifier
1 Standby/on switch (ê/I) . . . . . . . . . . . . . . . . . . . . . . 11, 34, 35
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of
power.
DIGITAL
S.WOOFER
VOLUME
UP
œPLAY/œREC
H
2 Standby indicator (ê)
H/I
MODE
INPUT SELECTOR
TUNER/BAND
CLOCK/TIMER FM AUTO/
DEMO MONO
6CH
@
DISCRETE INPUT
DOWN
When the unit is connected to the AC mains supply, this indicator
lights up in standby mode and goes out when the unit is turned on.
3 Play timer/record timer button and indicator
(FPLAY/FREC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
4 ECO mode button (MODE) . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Clock/timer, demo button
(CLOCK/TIMER, –DEMO) . . . . . . . . . . . . . . . . . . . . . 11, 34–36
6 FM mode button (FM AUTO/MONO) . . . . . . . . . . . . . . . . . . 16
7 [SC-EH760]
?
TUNING
@
TUNING MODE
SET
KARAOKE
ECHO
PHONES
MIC
VOL
MIN
MAX
1
MIC
2
< = >
?
@
A B
Bofruse
6ch discrete input button (6CH DISCRETE INPUT) . . . . . . 24
8 Source input button (INPUT SELECTOR) . . . . . . . . . . . . . . 39
9 Tuner/band button (TUNER/BAND) . . . . . . . . . . . . . . . . . . . 16
: [SC-EH760]
SC-EH560
1 2 3 45 6 8 9
: ;
Digital super woofer button and indicator
(DIGITAL S.WOOFER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
[SC-EH560]
S.WOOFER
Super woofer button and indicator (S.WOOFER) . . . . . . . 21
; Volume control (VOLUME) . . . . . . . . . . . . . . . . . . . . 12, 16, 18
< Headphone jack (PHONES) . . . . . . . . . . . . . . . . . . . . . . . . . 37
= Tuning mode button (TUNING MODE) . . . . . . . . . . . . . . . . 16
> Set button (SET) . . . . . . . . . . . . . . . . . . . . . . . . . 11, 17, 34, 35
? Tuning buttons (X, W TUNING) . . . . . . . . . . . . . 11, 16, 34, 35
@ [SC-EH760\for\areas\except\Australia\and\N.Z.]
VOLUME
UP
œPLAY/œREC
H
H/I
MODE
INPUT SELECTOR
TUNER/BAND
CLOCK/TIMER FM AUTO/
DEMO MONO
@
DOWN
?
TUNING
@
RDS
DISP MODE PTY
TUNING MODE
SET
PS
PHONES
[SC-EH560\for\areas\except\United\Kingdom]
RDS display mode buttons
(RDS, PS–DISP MODE–PTY) . . . . . . . . . . . . . . . . . . . . . . . . 16
[SC-EH760\for\Australia\and\N.Z.]
< = >
?
@
KARAOKE and echo buttons (KARAOKE, ECHO) . . . . . . 40
A [SC-EH760\for\Australia\and\N.Z.]
Microphone jacks (MIC, 1, 2) . . . . . . . . . . . . . . . . . . . . . . . . 40
B [SC-EH760\for\Australia\and\N.Z.]
B
SC-EH760
Microphone volume control (MIC VOL) . . . . . . . . . . . . . . . 40
C D EF
G
H I
B
CD changer/CD player
»
DIRECT OPEN
DISC
OPEN
/
CLOSE
DISC
1
DISC
2
3
DISC
4
DISC
5
DISC
E
1
RANDOM
REPEAT
EDIT
2
C [SC-EH760]
M
N
3
»
Disc select buttons and indicators (DISC, 1–5) . . . . . . . . . 12
Green: Indicates that the tray is ready to play its CD or to be
opened.
4
g
5
D Random play button (RANDOM) . . . . . . . . . . . . . . . . . . . . . 15
E Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
F CD edit button (EDIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
G [SC-EH760]
J
K L M
Disc direct open buttons
(DIRECT OPEN, DISC 1– DISC 5) . . . . . . . . . . . . . . . . . . . . . 12
H Disc tray open/close button (< OPEN/CLOSE) . . . . . . . . . 12
I Skip/search buttons (4, 5) . . . . . . . . . . . . . . 13
J Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
K Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
L Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
M Play button and indicator (!) . . . . . . . . . . . . . . . . . . . . 12, 32
The color of the indicator depends on the operation taking place.
If stopped: orange
SC-EH560
D EFH I
OPEN/CLOSE
RANDOM
REPEAT
EDIT
E
M
N
If playing: green
»
If paused: flashes
g
J
K L M
8
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel controls
A
N
O
P
Q
R
A
»
Cassette deck
N Deck 1 cassette holder open button (< OPEN) . . . . . . . . . 18
O Deck 1 cassette holder
P Fast forward/rewind buttons (6, 5) . . . . . . . . . . . . . . . 19
Q Deck 2 cassette holder
R Deck 2 cassette holder open button (< OPEN) . . . . . . 18, 31
S Counter reset, display buttons
F
G
E
OPEN
EOPEN
HREC
PAUSE
COUNTER
DECK 1/2
DOLBY NR REV MODE TAPE EDIT
@
RESET
DISPLAY
(COUNTER, RESET, DISPLAY) . . . . . . . . . . . . . . . . . . . . . . 30
T Deck 1/deck 2 select button (DECK 1/2) . . . . . . . . . . . . 18, 19
U Playback buttons and indicators (", !) . . . . . . . . 18, 32, 33
The color of the indicators depends on the operation taking place.
If stopped, fast forwarding or rewinding: orange
S T UV WXYZ
If playing or recording: green
Bforuse
While carrying out TPS or recording is on standby: flashes
V Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 32
W Dolby noise reduction button (DOLBY NR) . . . . . . . . . 18, 31
X Reverse mode button (REV MODE) . . . . . . . . . . . . . . . . 18, 31
Y Tape edit button (TAPE EDIT) . . . . . . . . . . . . . . . . . . . . . . . 33
Z Record pause button (´ REC PAUSE) . . . . . . . . . . . . . 32, 33
B
SC-EH760
[
\
] ^
B
»
Sound processor
3D AI EQ/
M.EQ BAND
[ [SC-EH760]
MULTI JOG
Display mode button (DISPLAY MODE) . . . . . . . . . . . . . . . 37
DISPLAY MODE
[SC-EH560]
SUPER
SURROUND
CENTER
FOCUS
VIRTUAL REAR MULTI REAR 3D ENHANCED
SURROUND SURROUND SURROUND
SEAT
POSITION
UPRO LOGIC
Display mode, virtual speaker demo button
(DISPLAY MODE, –ëV DEMO) . . . . . . . . . . . . . . . . . . . 26, 37
OFF/ON
DSP CONTROL
\ Display
] 3D AI EQ, M.EQ BAND button
(3D AI EQ/M.EQ BAND) . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
^ [SC-EH760]
_ ` a b c d e
Jog control and joystick (MULTI JOG) . . . . . . . . . . . . . 20, 21
_ [SC-EH760]
DOLBY PRO LOGIC button and indicator
(ë PRO LOGIC, OFF/ON) . . . . . . . . . . . . . . . . . . . . . . . . . . 25
` [SC-EH760]
SC-EH560
Super surround button and indicator
(SUPER SURROUND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
a [SC-EH760]
[
\
] f g
Center focus button and indicator (CENTER FOCUS) . . . 27
b [SC-EH760]
3D AI EQ/
M.EQ BAND
Virtual rear surround button and indicator
(VIRTUAL REAR SURROUND) . . . . . . . . . . . . . . . . . . . . . . . 27
c [SC-EH760]
MULTI
CONTROL
DISPLAY MODE
-
EQ
UV DEMO
Multi rear surround button and indicator
(MULTI REAR SURROUND) . . . . . . . . . . . . . . . . . . . . . . . . . 27
d [SC-EH760]
VIRTUAL
DOLBY SURROUND
SIMULATED
STEREO
CENTER
SURROUND
EFFECT
SEAT
POSITION
EFFECT
DSP CONTROL
3D ENHANCED SURROUND button and indicator
(3D ENHANCED SURROUND) . . . . . . . . . . . . . . . . . . . . . . . 27
e Seat position button and indicator
(SEAT POSITION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
f [SC-EH560]
h i j k e
Multi control buttons
(2, 1, 3, 4 MULTI CONTROL) . . . . . . . . . . . . . . . . . . 20, 21
g [SC-EH560]
EQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
h [SC-EH560]
Virtual Dolby Surround button and indicator
(VIRTUAL DOLBY SURROUND) . . . . . . . . . . . . . . . . . . . . . . 26
i [SC-EH560]
Simulated stereo button and indicator
(SIMULATED STEREO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
j [SC-EH560]
Center effect button and indicator
(CENTER EFFECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
k [SC-EH560]
Surround effect button and indicator
(SURROUND EFFECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
9
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote control
A
l
u
H
SLEEP PROGRAM CANCEL
DISC
A
Controls
»
1
v
w
Buttons 1, 9–;, ], _, ` and g–i function in the same way
as the controls on the main unit.
l Sleep timer button (SLEEP) . . . . . . . . . . . . . . . . . . . . . . . . . 36
m Numbered buttons (1–9, 0, M) . . . . . . . . . . . . 14, 15, 17
n Cursor buttons (2, 1, 3, 4) . . . . . . . . . . . . . . . . . . . . 20, 21
o [SC-EH760]
1
4
7
2
5
8
3
6
9
j/-/--
m
0
Channel select button (CH SELECT) . . . . . . . . . . . . . . . 24, 26
p [SC-EH760]
Test button (TEST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
q [SC-EH760]
3D AI EQ/M.EQ BAND
g
x
]
EQ
n
Input select button (VCR/AUX/6CH INPUT) . . . . . . . . . 24, 39
[SC-EH560]
VCR button (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
r TAPE select, deck 1/deck 2 select button
(TAPE/DECK 1/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19
s CD pause/Tape reverse playback button
(2/;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32, 33
t Muting button (MUTING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
u Program button (PROGRAM) . . . . . . . . . . . . . . . . . . . . . . . . 14
v Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
w [SC-EH760]
y
Bofruse
CH SELECT
AV EFFECT
o
`
i
:
p
_
h
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
z
VCR/AUX/
6CH INPUT DECK 1/2
TAPE/
TUNER/
BAND
CD
q
9
r
⁄/g
¤»
¤
Disc button (DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
x EQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
y AV effect button (AV EFFECT) . . . . . . . . . . . . . . . . . . . . 27–29
z CD button (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
{ CD play/tape forward playback button
(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 18, 32, 33
| CD/tape stop button (º) . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32
} CD skip/search, tape fast forward/rewind buttons
(4, 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 19
{
}
s
t
;
|
MUTING
M
N
∂
VOLUME
µ
B
»
Batteries
³Insert so the poles (i and j) match those in the remote control.
³Do not use rechargeable type batteries.
B
Do not;
³mix old and new batteries.
³use different types at the same time.
³heat or expose to flame.
³take apart or short circuit.
³attempt to recharge alkaline or manganese batteries.
³use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
R6/LR6
AA,UM-3
1
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when
held close to the front panel.
f
If the battery lid comes loose, slide it back into place horizontally.
C
»
Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 me-
ters directly in front of the unit.
C
Tuner amplifier
³Keep the transmission window and the unit’s sensor free from dust.
³Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not;
³put heavy objects on the remote control.
³take the remote control apart.
³spill liquids onto the remote control.
7m
30°
30°
10
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
A
»
Setting the time
This is a 24-hour clock.
The example shows how to set the clock for 16:25 (4:25 p.m.).
1 Press [ê/I] to turn the unit on.
1
2 1 Press [CLOCK/TIMER, –DEMO] to
1 2 2 3
display “CLOCK”.
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^-------------------------------------------------------------------}
2 Within 7 seconds
Press [SET].
Bforuse
3 1 Press [TUNING (X or W)] to set the
time.
The time display can be changed in one minute units by
tapping the buttons, and quickly by holding down the but-
tons.
2 Press [SET].
A
The time is set and the original display is restored.
H/I
1
Displaying the clock
Press [CLOCK/TIMER, –DEMO].
The clock is shown for about 5 seconds.
1
2
CLOCK/TIMER
2
3
B
@
DEMO
B
Turning DEMO off
»
SET
A demonstration of the display is shown if you have not set the clock.
Turn DEMO off to get the most from ECO mode.
While the unit is on:
Press and hold [CLOCK/TIMER, –DEMO]
until “NO DEMO” is displayed.
Each time you press and hold the button:
NO DEMO (off)bDEMO (on)
1
2
?
TUNING
@
SET
Saving power in the standby
mode
C
»
Set the unit to reduce energy consumption in the standby mode
(11 W>0.5 W).
CLOCK/TIMER
DEMO
@
While the unit is on:
1 Press [MODE].
The current mode is displayed.
2
Within 5 seconds
C
Press [MODE] to display “ECO”.
Each time you press the button:
NORMAL (off)bECO (on)
MODE
MODE
1
ECO: The clock is not displayed in the standby mode. The “ê” and
“FPLAY/FREC” indicators still light.
2
Note
The mode can be switched to ECO when the unit is in standby but it
cannot be switched back to NORMAL.
11
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
Normal play
Preparation: Press [ê/I] to turn the unit on.
[SC-EH760]
H/I
4
SC-EH760
1 2
1 Press [DIRECT OPEN] ([DISC 1]–
[DISC 5]) to open a tray and set a CD.
2 Press [< OPEN/CLOSE] to close the
tray.
Repeat steps 1 and 2 to load the other trays.
DISC 1–5
3 Press [!] to start play.
Play starts from the first track on the disc in the play position
and finishes at the end of the last track on the final disc (see
below).
3
1 2 3
SC-EH560
You can start play from another disc by pressing [DISC 1–5].
4 Adjust the volume.
Note
Bcperations
You can not change CDs while a disc is playing.
What is meant by “final disc”?
For example, if play starts from disc 4, disc 3 will be the “final disc”.
Order of progression:
SC-EH760
SC-EH560
OPEN/CLOSE
1
2
Disc 4>5>1>2>3
DIRECT OPEN
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
E
[SC-EH560]
1 Press [< OPEN/CLOSE] to open the
tray and set a CD.
Label must
face upward
2 Press [< OPEN/CLOSE] to close the
tray.
3 Press [!] to start play.
4 Adjust the volume.
DISC
OPEN/CLOSE
SC-EH760
SC-EH560
E
Disc
number
Total
number of playing
tracks time
Total
Elapsed
play time
3
4
Track number
DISC
VOLUME
UP
12
DOWN
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
To stop the disc
Press [º].
To pause play
Press [;] during play. The “!” indicator flashes.
Press [;] or [!] to resume play.
M, N
Skipping tracks
Press [4] (backward), or [5] (forward).
Play position
twice
once
once
twice
Track
Track
Track
[
M
]
[
N
]
»
g
Searching through tracks
During play
Press and hold [4] (backward), or [5] (forward).
“NO DISC” is displayed
When the unit is in CD mode but a disc isn’t in the playing position
A
(SC-EH760) or in the player (SC-EH560).
a
b
Note
Bcperations
³Skipping is done in the selected order in program play (➡ page 14).
³You cannot skip to tracks already played in random play
(➡ page 15).
³You can search only within tracks in program and random play.
CD selection
A
»
Choose discs with this mark (a).
c
Do not;
³use irregularly shaped discs (b).
³attach extra labels and stickers.
³use discs with labels and stickers that are coming off or with adhe-
sive exuding from under labels and stickers (c).
³attach scratch-proof covers or any other kind of accessory.
³write anything on the CD.
³clean CDs with liquids. (Wipe with a soft, dry cloth.)
³use CDs printed with label printers available on the market.
B
To prevent damage
B
»
Always observe the following points.
³Load only 1 CD per tray (d).
³Load CDs as shown in figure (e).
An adaptor is not needed with 8 cm CDs (singles).
³Set the system on a flat, level surface.
³Always unload all CDs before moving the system.
d
e
Do not;
³set it on top of magazines, inclined surfaces, etc.
³move the system while tray is opening/closing, or when loaded.
³put anything except CDs in trays.
³use cleaning CDs or CDs which are badly warped or cracked.
8cm CD
12cm CD
13
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
H
SLEEP PROGRAM CANCEL
DISC
1
2
3
4
Program play
1
4
7
2
5
8
3
6
9
j/-/--
Select up to 24 tracks to play in the order you choose.
0
3D AI EQ/M.EQ BAND
Remote control only
EQ
Preparation: Press [CD] to put the unit in CD mode.
1 Press [PROGRAM].
CH SELECT
AV EFFECT
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
2
[SC-EH760]
VCR/AUX/
6CH INPUT DECK 1/2
TAPE/
TUNER/
BAND
CD
¤»
Press [DISC].
CD
⁄/g
¤
5
MUTING
M
N
3
[SC-EH760]
∂
VOLUME
µ
Within 10 seconds or so
Press [1]–[5] to select the disc.
DISC
PROGRAM
4 Select the track with the numbered
PRGM
1
2
3
buttons.
For tracks numbered 10 and over, press [L] then the two
digits.
Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560)
to program the tracks in the required order.
The total playing time of the programmed tracks is displayed.
SC-EH760
Bcperations
DISC
PRGM
DISC
5 Press [1].
All the tracks are played in the selected order.
SC-EH760
DISC
PRGM
1
2
3
[A] To cancel
Press [PROGRAM].
4
5
“CLEAR” is displayed and all the tracks are canceled. If a track was
playing, play continues to the end of the disc.
1
4
7
2
5
8
3
6
9
Programmed
order
j/-/--
“FULL” is displayed
If 24 tracks have been programmed.
Programmed
4
track no.
0
DISC
PRGM
“––:––” is displayed if;
³total playing time for the tracks is over 99 minutes and 59 seconds.
³a track numbered 25 or over was programmed.
³a disc not in playing position was programmed (SC-EH760).
Tracks can still be programmed and played.
Total playing time
DISC
PRGM
[A] To check the contents of the program
1 Press [CANCEL]. “CANCEL” will light.
2 Press [4] or [5]. Each time you press the button,
the disc numbers (SC-EH760), track numbers and program posi-
tions are displayed.
3 After the playing time appears on the display, press [CANCEL].
“CANCEL” goes out.
¤
5
A
To add to the end of the program
Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560).
H
SLEEP PROGRAM CANCEL
DISC
PROGRAM
CANCEL
1
4
7
2
5
8
3
6
9
j/-/--
[A] To cancel tracks
0
3D AI EQ/M.EQ BAND
1. Press [CANCEL].
EQ
2. Select the track with [4] or
A particular track
[5] then press [CANCEL].
CH SELECT
AV EFFECT
3. Press [CANCEL] again.
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
All tracks
Press [PROGRAM] or [º] while stopped.
VCR/AUX/
TAPE/
TUNER/
BAND
CD
¤»
6CH INPUT DECK 1/2
⁄/g
¤
To program the track you are listening to
Press [PROGRAM]. The program mode engages and the current
track is automatically recorded as program No. 1.
»
MUTING
M
N
M, N
∂
VOLUME
µ
14
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
CDs
A
H
SLEEP PROGRAM CANCEL
DISC
Other modes of play
1
4
7
2
5
8
3
6
9
1
2
3
j/-/--
Preparation: Press [CD] on the remote control or [INPUT
0
SELECTOR] on the tuner amplifier to select “CD”.
3D AI EQ/M.EQ BAND
EQ
Direct access play
A
»
CH SELECT
AV EFFECT
[SC-EH760]
Starts normal play from a selected track on a selected disc to the last
track of the final disc (➡ page 12).
[SC-EH560]
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
TAPE/
TUNER/
BAND
CD
6CH INPUT DECK 1/2
CD
⁄/g
¤»
¤
Starts normal play from a selected track to the last track.
Remote control only
SC-EH760
DISC
1
2
3
1
2
[SC-EH760]
DISC
Press [DISC].
[SC-EH760]
Within 10 seconds or so
Press [1]–[5] to select the disc.
SC-EH760
DISC
1
2
3
Bcperations
4
5
3 Select the track with the numbered
buttons.
For tracks numbered 10 and over, press [L] then the two
DISC
1
2
5
8
3
6
9
digits.
j/-/--
4
7
0
Random play
B
»
[SC-EH760]
Plays the tracks of all discs once each in random order.
[SC-EH560]
Plays the tracks once each in random order.
Press [RANDOM].
INPUT SELECTOR
SC-EH760
RANDOM REPEAT
To cancel
Press [RANDOM].
“RANDOM” goes out.
For your reference:
In the program play mode (➡ page 14), the programmed tracks are
played randomly.
RANDOM REPEAT
SC-EH560
Repeat play
C
»
[SC-EH760]
Repeats all tracks on all discs or all programmed tracks.
[SC-EH560]
Repeats all tracks or programmed tracks.
Press [REPEAT] before or during play.
B
SC-EH760 SC-EH560
DISC
RANDOM
RANDOM
RANDOM
To cancel
Press [REPEAT].
“`” goes out.
C
SC-EH760 SC-EH560
To repeat only your favorite track(s)
1 Program the track(s) you want (➡ page 14).
2 Press [REPEAT] and make sure “`” is displayed.
3 Press [!]. Play will start.
DISC
REPEAT
REPEAT
15
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
The radio: manual tuning
Radio stations can be tuned manually by selecting the station’s fre-
quency or they can be preset into channels to make it easy to tune
with the tuner amplifier or the remote control (➡ page 17).
2FM AUTO/
MONO
1 3
4
Preparation: Press [ê/I] to turn the unit on.
H/I
1 Press [TUNER/BAND] to select FM or
AM.
Each time you press the button: FMcAM
2 Press [TUNING MODE] to select
“MANUAL”.
Each time you press the button: MANUALcPRESET
3 Press [TUNING (X or W)] to tune in the
RDS
DISP MODE PTY
desired broadcast.
PS
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being re-
ceived.
TUNER/BAND
1
2
3
MHz
4 Adjust the volume.
TUNING MODE
Auto tuning
Bcperations
Press and hold [TUNING (X or W)] for a moment until the frequency
starts changing rapidly. The unit begins auto tuning, stopping when it
finds a station.
³When there is excessive interference, auto tuning may not function.
³To cancel auto tuning, press [TUNING (X or W)] once again.
?
TUNING
@
TUNED
ST
MHz
If noise is excessive in FM
A
»
Press [FM AUTO/MONO] to display “MONO.”
This mode improves sound quality if reception is weak for some rea-
son but broadcasts are heard in monaural.
Press [FM AUTO/MONO] again to cancel the mode. “MONO” goes
out.
VOLUME
UP
4
DOWN
MONO is also canceled if the frequency is changed.
Turn off “MONO” for normal listening. Stereo and monaural broad-
casts are automatically played as they are received.
FM AUTO/
MONO
TUNED
A
B
MONO
MHz
Stations can be preset in monaural. Carry out presetting manually
(➡ page 17).
RDS
RDS broadcasting
PS
DISP MODE PTY
RDS PS
[SC-EH760\for\areas\except\Australia\and\N.Z.]
[SC-EH560\for\areas\except\United\Kingdom]
B
»
TUNED
ST
RDS PTY
This unit can display the text data transmitted by the radio data sys-
tem (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS”
will light up on the display.
PTY displays
FINANCE
Displaying the name of a broadcasting station
Press [PS-DISP MODE] to display a station name.
Press [DISP MODE-PTY] to display a program type.
Each time you press the button:
NEWS
VARIED
COUNTRY
AFFAIRS
INFO
POP M
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ROCK M
M.O.R M¤
LIGHT M
CLASSICS
OTHER M
WEATHER
Frequency displaycPS or PTY display
SPORT
If the PS display isn’t shown
Press and hold [PS-DISP MODE] for about 4 seconds.
The mode switches every time the button is pressed and held:
MODE 1cMODE 2
EDUCATE
DRAMA
CULTURE
SCIENCE
ALARM
Note
RDS displays may not be available if reception is poor.
¤“M.O.R M”l“Middle of the road music”.
16
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
The radio: preset tuning
Choose either automatic presetting, which presets all the stations the
tuner amplifier can receive, or manual presetting, which allows you to
select the stations to preset and the order they are to be preset in.
There are 39 channels available for presetting.
SET
A
»
Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at
(➡ page 16).
TUNING MODE
24 3
Hold down [SET].
SET
A
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in
ascending order. FM stations are preset into channels 1 to 39, and
AM stations are preset into channels 21 to 39.
“SET OK” is shown when presetting is complete and the last station
to be preset is played.
“ERROR” is displayed if the tuner doesn’t receive any stations. Do
presetting manually if this happens (see below).
MHz
Note
Bcperations
AM stations replace any FM channels that were preset in channels
21 to 39.
B
SET
B
Manual presetting
»
2
3
Preset the stations one at a time.
?
TUNING
@
1 Tune to the required station.
2 Press [SET].
3 Press [TUNING (X or W)] to select a
channel.
SET
4
4 Press [SET].
The station occupying a channel is erased if another station is preset
in that channel.
C
H
SLEEP PROGRAM CANCEL
DISC
1
4
7
2
5
8
3
6
9
j/-/--
C
Selecting channels
»
0
2
3D AI EQ/M.EQ BAND
On the remote control
EQ
CH SELECT
AV EFFECT
1 Press [TUNER/BAND].
2 Press the numbered buttons to select
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
6CH INPUT DECK 1/2
TAPE/
TUNER/
BAND
CD
¤»
the channel.
⁄/g
¤
1
3
For channels 1 to 9 press the corresponding number.
For channels 10 or over press [L], then the two digits.
e.g. To select channel 21 [L]>[2]>[1]
MUTING
M
N
∂
VOLUME
µ
3 Adjust the volume.
TUNER/
BAND
1
2
On the main unit
1 Select “PRESET” with [TUNING MODE].
2 Press [TUNING (X or W)] to select the channel.
1
2
5
8
3
6
9
Preset channel
j/-/--
4
7
0
∂
VOLUME
µ
3
17
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette tapes
Preparation: Press [ê/I] to turn the unit on.
1 Press [< OPEN] on deck 1 or deck 2
and insert the cassette.
1 4
2 3 1
2 Press [DOLBY NR] to select Dolby NR
on (“ëNR” appears) or off.
(➡ “Dolby noise reduction” page 19)
3 Press [REV MODE] to select the re-
verse mode.
Each time you press the button:
h: One side is played.
d: Both sides are played.
f: Both sides are played 8 times each.
@
DECK 1/2
H/I
5
4 Press ["] (reverse side) or [!] (forward side).
Play begins and the indicator changes to green.
5 Adjust the volume.
To stop the tape
Bcperations
Press [º].
[A] To change the deck to be used
Press [DECK 1/2] to select the deck you want to play.
E
OPEN
1
Forward side
Tape facing down
To listen to 2 tapes consecutively
Insert a tape into each deck and select “f”. Both tapes will be
played 8 times each.
DOLBY NR
2
3
4
Cassette tape selection and care
1
Î
NR
The unit can correctly play the following types. It identifies the type
automatically.
Normal position/TYPE I
High position/TYPE II
Metal position/TYPE IV
✔
✔
✔
REV MODE
1
ÎNR
³Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
³Tape slack can get caught up in the mechanism and should be tak-
en up before the tape is played.
³Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse mech-
anism.
Tape direction
VOLUME
5
UP
DOWN
A
DECK 1/2
ÎNR
2
Deck in use
18
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette tapes
Fast-forwarding and rewinding
A
»
Press [6] or [5] while the tape is
stopped.
F, G
Tape direction
rewind
6
fast-forward
5
!
"
5
6
For your reference:
³Each deck’s play direction is stored in the system’s memory.
³You can fast forward or rewind the tape while you are playing or
recording a tape in another deck. Press [DECK 1/2] to switch to the
non playing deck, and then press [6] or [5]. After the above
operation, be sure to press [DECK 1/2] to reselect the deck in which
you are playing a tape.
DECK 1/2
A
B
F
F
G
Tape program sensor (TPS)
B
»
TPS finds the beginning of a track and resumes play from there.
Press [6] or [5] during play.
Bcperations
Tape direction
backward
6
forward
5
!
"
G
5
6
Note
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
Dolby noise reduction
Dolby NR reduces “hissing” when playing tapes. It increases the high
frequency region when recording and then reduces it in playback.
Use the same system during playback and recording. This unit has
Dolby B NR which reduces noise to a third.
Prerecorded cassettes and equipment marked “ë” use Dolby B NR.
Dolby noise reduction manufactured under license from
Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
19
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing sound field and
quality
A
»
Changes to sound field and quality have no effect on recordings.
[SC-EH760]
SC-EH760
SC-EH560
MULTI JOG
Turn [MULTI JOG] to select a setting.
[SC-EH560]
Press [EQ] to select a setting.
Each time you turn [MULTI JOG] (SC-EH760) or press [EQ]
(SC-EH560):
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
2 13
EQ
HALL:
AI-EQ:
Expands sound to make you feel like you were in a hall.
Adjust sound with the acoustic image equalizer
(➡ page 21).
M.EQ:
FLAT:
Create your own effects (➡ see below).
Canceled (no effect is added).
On the remote control
Press [EQ].
2
1 3
(On the tuner amplifier)
SC-EH760 SC-EH560
Note
A
Turn off the effect if sound quality reduces when using HALL or 3D AI
EQ with a source.
MULTI JOG
(On the sound processor)
EQ
SC-EH760
SC-EH560
B
Using the manual equalizer
»
FLAT
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
FLAT
HALL
AI-EQ
M.EQ
Create your own sound quality effects.
HEAVY
CLEAR
1
[SC-EH760]
Turn [MULTI JOG] to select “M.EQ”.
[SC-EH560]
B
MULTI JOG
Press [EQ] to select “M.EQ”.
1
(On the sound processor)
EQ
2 Press [3D AI EQ/M.EQ BAND] to se-
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
lect the band.
Each time you press the button:
LOW>MID>HIGH
Cghsofendquality
3D AI EQ/
M.EQ BAND
^------------------------}
2
(On the tuner amplifier)
3 Use [", !, #, $] to make the re-
quired curve.
1 Select the frequency you want to use as the peak with [",
!].
2
MULTI JOG
MULTI
2 Adjust the level of the peak with [#, $].
³Adjacent frequencies are adjusted at the same time to
maintain a smooth curve.
3
1
CONTROL
³When you have adjusted the curve, you can move the
peak of the curve by pressing [", !] (a).
1
Repeat steps 2 and 3 to adjust the three bands.
The original display is restored on the display panel in about
5 seconds.
(On the sound processor)
2
MID
1
2
a
FLAT
HALL
HEAVY
CLEAR
AI-EQ
M.EQ
To cancel
Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select
“FLAT”.
LOW
HIGH
FLAT
HALL
AI-EQ
M.EQ
Note
HEAVY
CLEAR
³The changes you make are stored and automatically recalled the
next time you select “M.EQ”.
³After making a curve in one band, any adjustments in another band
make a curve that is a combination of the two.
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
[C] To flatten the curves in all three bands
Set the frequencies b in LOW, c in MID, and d in HIGH to flat.
C
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
b
c
d
20
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing sound field and quality
Using the acoustic image equalizer
(3D AI EQ)
A
»
SC-EH760
2 1 3
Achieve subtle sound quality settings with the soft, sharp, heavy, and
light coordinates.
Select one of the two 3D settings for a surround effect.
A
1
[SC-EH760]
Turn [MULTI JOG] to select “AI-EQ”.
[SC-EH560]
Press [EQ] to select “AI-EQ”.
2 1 3
SC-EH560
2 Press [3D AI EQ/M.EQ BAND] to se-
lect the surround level.
Each time you press the button:
AI EQ>3D AI 1>3D AI 2
^__-----------------__}
3 Change the sound quality with [", !,
#, $].
1 Adjust softness and sharpness with [", !].
2 Adjust heaviness and lightness with [#, $].
SC-EH760 SC-EH560
(On the tuner amplifier)
1
2
MULTI JOG
The original display is restored on the display panel in about
5 seconds.
EQ
To cancel
Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select
“FLAT”.
3D AI EQ/
M.EQ BAND
Note
(On the sound processor)
³The changes you make are stored and automatically recalled the
next time you select “AI-EQ”.
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
³“3D AI 1” and “3D AI 2” cannot be selected while the surround sys-
tem or karaoke mode is on (➡ page 22 or 40).
Chgsofendquality
2
MULTI JOG
1
MULTI
CONTROL
3
1
FLAT
HALL
AI-EQ
M.EQ
B
»
Boosting the super woofer
HEAVY
CLEAR
1
2
[SC-EH760]
FLAT
HALL
AI-EQ
M.EQ
Press [DIGITAL S.WOOFER].
[SC-EH560]
HEAVY
CLEAR
2
Press [S.WOOFER].
The indicator lights.
SC-EH760 SC-EH560
DIGITAL
S.WOOFER S.WOOFER
B
Each time you press the button:
MID (medium)>MAX (high)>cancel
^_______---------------__}
There is only one level when listening through headphones.
To cancel
Press [DIGITAL S.WOOFER] (SC-EH760) or [S.WOOFER]
(SC-EH560) to turn the indicator off.
SC-EH760 SC-EH560
(On the tuner amplifier)
DIGITAL
S.WOOFER
S.WOOFER
21
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying surround sound
The following chart gives a summary of this unit’s surround features. It also shows additional features that can be used to enhance your enjoyment.
Note
³All the features are only effective if speakers are used. No discernible effect will be heard through headphones.
³You may experience a reduction in sound quality when these surround systems and effects are used with some sources. If this occurs, either turn
the surround system or effect off or reduce the level of the effect.
Surround system
Features
Software
³Use this input selector to enjoy
5.1 channel sources (e.g. Dolby Digital
or DTS) played on a DVD player with
5.1 channel output and a built in Dolby
Digital/DTS decoder (➡ page 38 for
connection, page 24 for operation).
³Connect a subwoofer (not included) to
the SUBWOOFER OUT terminal to
enhance the surround effect (➡ page 24
for operation).
DVDs encoded with Dolby Digital or DTS
can be identified with these marks.
[SC-EH760]
6CH DISCRETE INPUT
(➡ page 24)
See the manual for the equipment you
have connected for details on the types of
software you can use.
³Dolby Pro Logic is a decoding system that was
developed to get a better sense of presence
from sources encoded with Dolby Surround.
The feeling of position has been improved by
the addition of a separate center speaker
channel.
Software encoded with Dolby Surround
can be identified with this mark.
³DVD
[SC-EH760]
DOLBY PRO LOGIC
(➡ page 25)
³This unit has built-in Dolby Pro Logic circuitry
so you can enjoy Dolby Surround by
connecting the speakers.
³If your DVD player only has 2-channel output,
you can still enjoy surround sound when
playing 5.1 channel software by using Dolby
Pro Logic.
³Laser Disc
³Video tape
³CD
Software encoded with Dolby Digital or
Dolby Surround can be identified with
these marks.
This mode enables you to play sources
recorded in Dolby Digital or Dolby Pro
Logic through the two front speakers, but
with a surround-like effect.
[SC-EH560]
VIRTUAL DOLBY SURROUND
(➡ page 26)
Cghsofendquality
³DVD
³Laser Disc
³Video tape
³CD
³This mode adds surround effects to
movie software that hasn’t been
recorded with the above systems.
³In MOVIE mode you can adjust the
volume of the surround speakers to get
the best surround effect.
Any stereo sound source except for the
radio.
³Video tape
³CD
³Tape
[SC-EH760]
SUPER
SURROUND
(➡ page 26)
MOVIE
This mode adds surround effects to stereo
sources.
MUSIC
Any monaural sound source except for the
radio.
³Video tape
³CD
This mode adds stereo-like effects to
monaural sources.
SIMULATED STEREO
(➡ page 26)
³Tape
Amplifier modes
[SC-EH760]
(Tuner amplifier)
Surround mode
TRI-AMP mode (stereo)
When using the above surround systems (except for SIMULATED STEREO), the
amplifier is automatically switched to the surround mode.
In all other cases, the TRI-AMP mode (stereo) is engaged. In this mode, three
separate amplifiers are used to drive the three sections (LOW, MID, and HIGH) of
the two front speakers.
[SC-EH560]
22
The TRI-AMP mode is active at all times.
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
[SC-EH760]
[SC-EH760]
A Center focus (➡ page 27)
³This mode makes it seem like the sound
from the center speaker is coming from
within the television.
You can select one of two levels.
³The center speaker should be placed on
top of the television.
B Virtual rear surround
(➡ page 27)
³This mode is useful if you have to place
your surround speakers near the front
speakers due to the layout of your room.
³This mode makes it seem like the sound
from the surround speakers is coming
from behind you.
Additional effects
A Center focus
B Virtual rear surround
C Multi rear surround
D 3D enhanced surround
G Seat position
A Center focus
B Virtual rear surround
C Multi rear surround
D 3D enhanced surround
G Seat position
Virtual speakers
[SC-EH760]
[SC-EH760]
C Multi rear surround
(➡ page 27)
D 3D enhanced surround
(➡ page 27)
This mode makes it seem like there are
multiple surround speakers in your room,
increasing the cinema-like atmosphere.
This mode adds width to the sound from
the surround and front speakers.
E Center effect
F Surround effect
G Seat position
Chgsofendquality
B Virtual rear surround
C Multi rear surround
D 3D enhanced surround
G Seat position
Virtual speakers
[SC-EH560]
E Center effect (➡ page 28)
F Surround effect (➡ page 28)
When you are using Virtual Dolby
Surround, you can adjust the sound that is
directed to the virtual center and surround
speakers in three levels.
G Seat position (➡ page 29)
This mode helps maintain the sound
position even if the listening position itself
is changed.
When you select a surround effect, the
indicators corresponding to the effects you
can use with that surround effect light
orange.
Virtual center
speaker
“DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems,
Inc.
Virtual surround
speakers
Manufactured under license from Dolby
Laboratories Licensing Corporation.
DOLBY, the double-D symbol ë and
“PRO LOGIC” are trademarks of Dolby
Laboratories Licensing Corporation.
23
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying surround sound
6CH DISCRETE INPUT SC-EH760
Preparation:
Connect a DVD player with a built in Dolby Digital or DTS decoder
(➡ page 38).
1
3
1 Press [6CH DISCRETE INPUT].
2 Playback a Dolby Digital or DTS
source on the DVD player.
3 Adjust the volume.
INPUT SELECTOR
DIGITAL
S.WOOFER
To cancel
Press [INPUT SELECTOR] to select another source.
6CH
DISCRETE INPUT
1
3
If you have connected a subwoofer
Press and hold [DIGITAL S.WOOFER] until “SUB W ON” is dis-
played.
[A] Speaker level adjustments
If the level of the speakers appears to be different while listening to a
source, adjust the level of the speakers to the same apparent level.
VOLUME
UP
While playing a Dolby Digital or DTS source
1 Press [CH SELECT] to select the speaker to adjust.
Each time you press the button:
DOWN
Lch:
Cch:
Rch:
Front left speaker
Center speaker
Front right speaker
A
H
SLEEP PROGRAM CANCEL
DISC
RSch: Right surround speaker
LSch: Left surround speaker
SWch: Subwoofer (only when connected)
2 Press [3] (to increase level) or [4] (to decrease level).
1
4
7
2
5
8
3
6
9
j/-/--
0
3D AI EQ/M.EQ BAND
2
EQ
Repeat steps 1 and 2 to adjust the level accordingly.
CH SELECT
AV EFFECT
Cghsofendquality
1
³If your DVD player is able to output a test signal, you can use it
instead of playing a source.
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
TAPE/
TUNER/
CD
¤»
6CH INPUT DECK 1/2
BAND
Note
⁄/g
¤
You cannot record or enjoy karaoke (for Australia and N.Z. only)
when you are using 6CH DISCRETE INPUT. To record or enjoy
karaoke with DVDs, ensure the DVD player is also connected to the
AUX (DVD) IN terminals and select “AUX (DVD)” with [INPUT
SELECTOR] (➡ page 39).
MUTING
M
N
∂
VOLUME
µ
1
CH SELECT
2
24
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying surround sound
DOLBY PRO LOGIC
SC-EH760
1 Press [ë PRO LOGIC, OFF/ON].
1
The indicator turns green.
2 Playback a Dolby Surround source.
To cancel
Press [ë PRO LOGIC, OFF/ON] so the indicator goes out.
[A] Speaker level adjustments
If the level of the speakers appears to be different while listening to a
source, adjust the level of the speakers to the same apparent level.
1 Press [TEST] to output a test signal.
The speaker outputting the test signal is displayed.
Lch: Front left speaker
UPRO LOGIC
1
OFF/ON
Cch: Center speaker
Rch: Front right speaker
Sch: Surround speakers
2 Press [VOLUME (j or i)] to set the volume level of the front
speakers normally used for enjoying the source.
3 Press [3] (to increase level) or [4] (to decrease level) for center
and surround speakers.
A
To stop the test signal, press [TEST] again.
H
SLEEP PROGRAM CANCEL
DISC
1
4
7
2
5
8
3
6
9
j/-/--
0
3D AI EQ/M.EQ BAND
3
EQ
CH SELECT
AV EFFECT
1
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
TAPE/
TUNER/
CD
¤»
6CH INPUT DECK 1/2
BAND
⁄/g
¤
MUTING
M
N
Chgsofendquality
∂
VOLUME
µ
2
1
2
TEST
∂
VOLUME
µ
3
25
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying surround sound
VIRTUAL DOLBY SURROUND
SC-EH560
A
»
SUPER
SC-EH760
SC-EH560
SURROUND
Press [VIRTUAL DOLBY SURROUND].
The indicator turns green.
To cancel
Press [VIRTUAL DOLBY SURROUND] so the indicator goes out.
Virtual speaker level adjustments
You can adjust the level (1, 2 or 3) of the virtual center and surround
speakers (only when CENTER EFFECT or SURROUND
EFFECT is on) (➡ page 28).
1 Press and hold [DISPLAY MODE, –ëV DEMO] to output a
demo signal.
VIRTUAL
DOLBY SURROUND
The speaker outputting the demo signal is displayed.
Lch: Front left speaker
Cch: Center speaker (virtual)
Rch: Front right speaker
Sch: Surround speakers (virtual)
2 Set the volume level of the front speakers normally used for en-
joying the source. ([C])
3 Press [3] (to increase level) or [4] (to decrease level) for center
and surround speakers. ([C])
DISPLAY MODE SIMULATED
-
UV DEMO
STEREO
(On the tuner amplifier)
A
VIRTUAL
DOLBY SURROUND
To stop the demo signal, press and hold [DISPLAY MODE, –ëV
DEMO] again.
B
»
SC-EH760
SUPER SURROUND
Press [SUPER SURROUND] and select
“MOVIE” or “MUSIC”.
(On the sound processor)
The indicator turns green.
FLAT
Each time you press the button:
MUSIC>MOVIE>SIMULATED STEREO
^----------STEREO SOUND (off)(---------}
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
C
SUPER
SURROUND
B
C
(On the tuner amplifier)
To cancel
Press [SUPER SURROUND] to select “STEREO SOUND”. The indi-
cator goes out.
[C] Surround speaker level adjustments
While playing a source
1 Press [CH SELECT].
H
SLEEP PROGRAM CANCEL
DISC
2 Press [3] (to increase level) or [4] (to decrease level).
1
4
7
2
5
8
3
6
9
j/-/--
D
SIMULATED STEREO
»
0
3D AI EQ/M.EQ BAND
,
EQ
[SC-EH760]
CH SELECT
AV EFFECT
Press [SUPER SURROUND] and select
CH SELECT
“SIMULATED STEREO”.
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
Each time you press the button:
VCR/AUX/
6CH INPUT DECK 1/2
TAPE/
TUNER/
BAND
CD
¤»
MUSIC>MOVIE>SIMULATED STEREO
^----------STEREO SOUND (off)(---------}
⁄/g
¤
MUTING
M
N
[SC-EH560]
∂
VOLUME
µ
VOLUME∂, µ
Press [SIMULATED STEREO].
The indicator turns green.
To cancel
[SC-EH760]
D
SC-EH760 SC-EH560
Press [SUPER SURROUND] to select “STEREO SOUND”. The indi-
cator goes out.
[SC-EH560]
SUPER
SIMULATED
STEREO
SURROUND
Press [SIMULATED STEREO] so the indicator goes out.
26
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround effects [SC-EH760]
These effects are available when the corresponding indicators are
alight.
CENTER MULTI REAR
FOCUS SURROUND
A
»
CENTER FOCUS
Press [CENTER FOCUS].
The indicator turns green.
Each time you press the button:
CENTER FOCUS1>CENTER FOCUS2>(off)
^_____----------------------------------------___}
To cancel
VIRTUAL REAR
SURROUND
3D ENHANCED
SURROUND
Press [CENTER FOCUS] so the indicator turns orange.
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “CENTER FOCUS” indicator flashes.
3 Press [3] (to turn on or increase level) or [4] (to decrease level
or turn off).
H
SLEEP PROGRAM CANCEL
DISC
1
4
7
2
5
8
3
6
9
(The indicator turns orange when off.)
j/-/--
0
3D AI EQ/M.EQ BAND
B
VIRTUAL REAR SURROUND
»
3
EQ
2
1
Press [VIRTUAL REAR SURROUND].
The indicator turns green.
CH SELECT
AV EFFECT
TEST UPRO LOGIC SUPER
DIGITAL
To cancel
SURROUND S.WOOFER
Press [VIRTUAL REAR SURROUND] so the indicator turns orange.
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “VIRTUAL REAR SURROUND” indicator
flashes.
3 Press [3] (ON) or [4] (OFF).
(The indicator turns orange when off.)
(On the tuner amplifier)
A
B
C
D
CENTER
FOCUS
(On the sound processor)
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
C
»
MULTI REAR SURROUND
Chgsofendquality
Press [MULTI REAR SURROUND].
(On the tuner amplifier)
The indicator turns green.
VIRTUAL REAR
SURROUND
To cancel
(On the sound processor)
Press [MULTI REAR SURROUND] so the indicator turns orange.
FLAT
HALL
AI-EQ
M.EQ
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “MULTI REAR SURROUND” indicator
flashes.
3 Press [3] (ON) or [4] (OFF) .
(The indicator turns orange when off.)
HEAVY
CLEAR
(On the tuner amplifier)
MULTI REAR
SURROUND
(On the sound processor)
D
»
3D ENHANCED SURROUND
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
Press [3D ENHANCED SURROUND].
The indicator turns green.
(On the tuner amplifier)
To cancel
Press [3D ENHANCED SURROUND] so the indicator turns orange.
3D ENHANCED
SURROUND
On the remote control
1 Press [AV EFFECT].
(On the sound processor)
2 Press [2] or [1] so the “3D ENHANCED SURROUND” indicator
flashes.
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
3 Press [3] (ON) or [4] (OFF).
(The indicator turns orange when off.)
27
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround effects [SC-EH560]
These effects are available when the corresponding indicators are
alight.
1 1 2 2
A
»
CENTER EFFECT
1 Press [CENTER EFFECT].
The indicator flashes green.
2
While the indicator is flashing (within 10 seconds)
Press [3] (to increase level) or [4] (to
decrease level).
H
SLEEP PROGRAM CANCEL
There are three levels.
1
4
7
2
5
8
3
6
9
j/-/--
To cancel
0
1 Press [CENTER EFFECT] so the indicator flashes green.
2 Press [CENTER EFFECT] again while the indicator is flashing so
it turns orange.
3D AI EQ/M.EQ BAND
3
EQ
2
1
AV EFFECT
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “CENTER EFFECT” indicator flashes.
3 Press [3] (to turn on or increase level) or [4] (to decrease level).
To turn it off, after steps 1 and 2 press [4] so the indicator turns
orange.
UVIRTUAL SIMULATED S.WOOFER
STEREO
CENTER
EFFECT
A
B
SURROUND EFFECT
»
1
1 Press [SURROUND EFFECT].
MULTI
CONTROL
The indicator flashes green.
2
2
While the indicator is flashing (within 10 seconds)
Press [3] (to increase level) or [4] (to
decrease level).
Cghsofendquality
There are three levels.
SURROUND
EFFECT
B
1
To cancel
1 Press [SURROUND EFFECT] so the indicator flashes green.
2 Press [SURROUND EFFECT] again while the indicator is
flashing so it turns orange.
MULTI
CONTROL
2
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “SURROUND EFFECT” indicator flashes.
3 Press [3] (to turn on or increase level) or [4] (to decrease level).
To turn it off, after steps 1 and 2 press [4] so the indicator turns
orange.
28
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround effects
SEAT POSITION
1 Press [SEAT POSITION].
SC-EH760
1 2
The indicator flashes green.
2
While the indicator is flashing (within 10 seconds)
Adjust the seat position.
To cancel
1 Press [SEAT POSITION] so the indicator flashes.
2 Press [SEAT POSITION] again while the indicator is flashing so it
turns orange.
1
2
SC-EH560
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “SEAT POSITION” indicator flashes.
3 Press [3] (ON).
4 Adjust the seat position with [2, 1, 3, 4] (SC-EH760) or [2, 1]
(SC-EH560).
To turn it off, after steps 1 and 2 press [4] so the indicator turns
orange.
H
SLEEP PROGRAM CANCEL
DISC
1
4
7
2
5
8
3
6
9
j/-/--
[SC-EH760]
With virtual rear surround
0
3D AI EQ/M.EQ BAND
or 3D enhanced surround
[SC-EH560]
3 horizontal steps
5 horizontal steps
EQ
234
CH SELECT
AV EFFECT
1
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
TAPE/
TUNER/
CD
¤»
6CH INPUT DECK 1/2
BAND
⁄/g
¤
Chgsofendquality
MUTING
M
N
∂
VOLUME
µ
(On the tuner amplifier)
1
2
SEAT
POSITION
(On the sound processor)
SC-EH760 SC-EH560
SC-EH760
MULTI JOG
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
SC-EH560
FLAT
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
29
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Before recording
(Deck 2 only)
Note
COUNTER
RESET DISPLAY
[SC-EH760]
A
You cannot record when [6CH DISCRETE INPUT] is selected.
(“ERROR” appears.)
Selection of tapes for recording
The unit automatically identifies the type of tape.
Normal position/TYPE I
High position/ TYPE II
Metal position/ TYPE IV
✔
✔
✔
DECK 1/2
COUNTER
DISPLAY
To display the tape counter while recording
A
»
Press [COUNTER DISPLAY].
The counter is displayed for about 5 seconds.
COUNTER
To reset the tape counter
Press [COUNTER RESET].
RESET
³To display or reset the tape counter for deck 1, first press
[DECK 1/2].
B
Side A
Erasure prevention
B
»
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
Tab for side “A”
Tab for side “B”
To re-record
Normal tape
High-position tape
Volume, sound quality and surround effects
A
A
These have no effect on recording. Sound quality and surround
effects are automatically set to flat when recording.
Rdcgperations
Discrimination hole
Erasing recordings
C
»
1 Press [INPUT SELECTOR] to select “TAPE”.
2 Insert the recorded tape into deck 2.
3 Press [DOLBY NR] so the “ëNR” indicator goes out.
4 Select the reverse mode.
C
1
5 Press [´ REC PAUSE].
6 Press ["] or [!].
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
3
5 2
6
4
30
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Before recording (Deck 2 only)
Preparatory steps
Do these steps before each recording.
Wind up the leader tape in deck 2 so recording can begin imme-
diately.
2 1
1 Press [< OPEN] on deck 2 and insert
the cassette.
Insert the cassettes on both decks for tape-to-tape recording
(➡ page 33).
DECK 1: For playback
DECK 2: For recording
2 Press [DOLBY NR] to select Dolby NR
3
on (“ëNR” appears) or off.
(➡ “Dolby noise reduction” page 19)
3 Press [REV MODE] to select the re-
verse mode.
Each time you press the button:
h:
One side only records.
d and f: Both sides record (forward> reverse).
“f” automatically changes to “d” when [´ REC PAUSE],
[EDIT] or [TAPE EDIT] is pressed.
EOPEN
Forward side
Tape facing down
1
DOLBY NR
REV MODE
2
3
2
Î
NR
2
ÎNR
Rcdgperations
31
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording CDs
Preparation:
³Do the preparatory steps (➡ page 31).
³Insert the CD(s) you want to record (➡ page 12).
³[SC-EH760]
1
2
Press [DISC 1]–[DISC 5] on the CD changer to select the disc
where you want to start recording, then press [º] to stop the disc.
A
»
Normal recording
1 Press ["] (reverse side) or [!] (forward side)
then [º] to set the tape direction.
@
2 Press [´ REC PAUSE].
The deck goes into the recording standby mode and the indi-
cator “"” or “!” starts flashing.
SC-EH760
EDIT
3
3
3 Press [!] on the CD changer or CD
player.
Recording starts automatically.
4 seconds after the CD(s) finishes, the deck goes into the recording
standby mode.
@
DISC1–5
SC-EH560
EDIT
To stop recording
EITHER
Press [º] on the CD changer or CD player.
The deck goes into the recording standby mode 4 seconds later.
OR
Press [º] on the deck.
Recording stops immediately but the CD continues to play.
@
A
To record programmed tracks
Program tracks before step 1 (➡ page 14).
1
@
B
»
One touch CD editing
Rdcgperations
This function makes it easier for you to record from discs.
³When recording, if a track is cut off in the middle at the end of the
front side, it is recorded from the beginning on the reverse side.
³At the end of the reverse side recording stops and the current track
will be interrupted.
2
HREC
PAUSE
After pressing ["] or [!] then [º] on the cassette deck to set the tape
direction,
Press [EDIT].
Recording starts. In the meantime, “CD EDIT” will scroll across the
display from right to left.
2
REC
Î
NR
After edit-recording has finished
The cassette deck automatically stops.
3
To stop editing
Press [º] on the CD changer or CD player. The cassette deck also
stops.
B
“EDIT OUT” is displayed.
SC-EH760 SC-EH560
To edit programmed tracks
Program the tracks (➡ page 14) and press [EDIT].
EDIT
EDIT
EDIT
2
REC
ÎNR
32
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
A
»
Recording the radio
Preparation: Do the preparatory steps (➡ page 31).
1 Tune to the required station.
3 2
(➡ page 16 or 17)
A
2 Press [´ REC PAUSE].
The deck goes into the recording standby mode and the play
indicator “"” or “!” starts flashing.
3 Press ["] (reverse side) or [!] (forward side) to
start recording.
@
To stop recording
Press [º].
HREC
2
3
B
PAUSE
To temporarily stop recording
Press [´ REC PAUSE].
The deck goes into recording standby mode.
To resume recording press ["] or [!] with the flashing indicator.
2
REC
ÎNR
B
»
Tape-to-tape recording
Preparation: Do the preparatory steps 1 and 3 (➡ page 31).
1 Set the tape direction on both decks.
1 Press [DECK 1/2] to select “DECK 2”.
1
2
2 First press ["] or [!], and then [º].
Repeat steps 1 and 2 for deck 1.
2 Press [TAPE EDIT] to start recording.
The indicator “"” or “!” shows deck 2 direction.
If either deck 1 or deck 2 stops, the other deck also stops.
To stop recording
Press [º].
Rcdgperations
Both decks will stop.
11
DECK 1/2
To enjoy another source while recording
Start playing the other sound source.
You can change the volume level and tone quality without affecting
the recording.
2
Note
The recording level and the noise reduction effect of the original
(playback) tape will be recorded on the new tape.
@
TAPE EDIT
2
12
REC
33
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timers
The play timer
This timer starts play of the selected source at the selected time. The
example shows settings for preset radio channel 8 to play between
6:30 and 7:40 at j40 dB.
6 1 2–5
Preparation: Turn the unit on, set the time (➡ page 11), preset
radio stations if you want the timer to start playing
the radio (➡ page 17).
1 1 Press [CLOCK/TIMER, –DEMO] to
select “FPLAY.”
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^-------------------------------------------------------------------}
œPLAY/œREC
2 Press [SET] within 3 seconds.
CLOCK/TIMER
1
@
DEMO
1
2–5
1 Press [TUNING (X or W)] to select
the condition required and
2 press [SET].
SET
2
FPLAY
2 Select the start time.
3 Select the finish time.
4 Select the source.
TUNER()CD()TAPE
2–5 ?
^----------------------------------J
TUNING
@
1
Insert a CD or tape if you select these sources.
If you select TUNER
Select a preset channel.
5 Select the volume.
The play timer is now on standby. The display shows each
condition again then restores the original display.
SET
2
6 Press [ê/I] to turn the unit off.
“FPLAY/FREC” indicator remains illuminated to show the
play (or record) timer is on even when ECO mode is selected
(➡ page 11).
FPLAY
FPLAY
FPLAY
2
The timer starts at the set time with the volume increasing gradually
to the set level.
3
4
Tmperations
To cancel the timer
Press [FPLAY/FREC] so “FPLAY” goes out.
Each time you press the button:
FPLAY>FREC>FPLAY FREC>Light off (OFF)
^---------------------------------------------------------------------------------}
The play timer function will be canceled, but the settings stay in the
memory.
CH
MHz
FPLAY
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.
5
FPLAY
FPLAY
6
H/I
FPLAY
34
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timers
The record timer
This timer records the radio at the set time.
The example shows settings for recording preset channel 8 from
18:30 to 19:30.
6 1 2–4
Preparation: Turn the unit on, set the time (➡ page 11), preset
radio stations (➡ page 17).
1 1 Press [CLOCK/TIMER, –DEMO] to
select “FREC”.
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^-------------------------------------------------------------------}
œPLAY/œREC
2 Press [SET] within 3 seconds.
5
2–4
1 Press [TUNING (X or W)] to select
the condition required and
2 press [SET].
2 Select the start time.
3 Select the finish time.
4 Select the preset channel.
CLOCK/TIMER
1
2
@
DEMO
1
The record timer is now on standby. The display shows each
condition again then restores the original display.
SET
5 Prepare for recording.
1 Insert a tape into deck 2.
FREC
2 Select the Dolby NR mode.
3 Select the reverse mode.
4 Select the tape direction.
2–4 ?
TUNING
@
6 Press [ê/I] to turn the unit off.
“FPLAY/FREC” indicator remains illuminated to show the
record (or play) timer is on even when ECO mode is selected
(➡ page 11).
1
Recording starts 30 seconds before the set time with the volume mut-
ed during the set time.
SET
2
Tmperations
To cancel the timer
Press [FPLAY/FREC] so “FREC” goes out.
Each time you press the button:
FREC
2
FPLAY>FREC>FPLAY FREC>Light off (OFF)
^---------------------------------------------------------------------------------}
The record timer function will be canceled, but the settings stay in the
memory.
FREC
3
4
CH
MHz
FREC
FREC
6
H/I
FREC
35
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timers
A
»
The play and record timers
Checking the timers
Press [CLOCK/TIMER, –DEMO] to select “FPLAY” (or “FREC”).
The timer conditions are shown in the following order:
Play timer:
Start time>Finish time>Source>Volume
Record timer:
A
œPLAY/œREC
Start time>Finish time>Broadcast station you select
The timers can be checked even if the unit is off.
Playing the unit after the timers are set
The unit can be used after the timers are set. Make sure the unit is off
before the set start time.
Turning the timers on and off
The timers come on at the set times if “FPLAY/FREC” indicator is
illuminated. They can be turned on and off by pressing [FPLAY/
FREC] (➡ pages 34 and 35).
CLOCK/TIMER
@
DEMO
B
Note
³If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
³If the power is on, the timer will not function. The system must be in
the standby mode.
³This system retains the ON/OFF time settings until you make a new
setting. If you make a new ON time setting, you must make a new
OFF time setting.
H
SLEEP PROGRAM CANCEL
DISC
SLEEP
1
4
7
2
5
8
3
6
9
j/-/--
0
3D AI EQ/M.EQ BAND
EQ
B
»
The sleep timer
CH SELECT
AV EFFECT
Remote control only
This timer turns the unit off after a set time.
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
TAPE/
TUNER/
BAND
CD
While playing a source
6CH INPUT DECK 1/2
⁄/g
¤»
¤
Press [SLEEP] to select the time
MUTING
M
N
(minutes).
∂
VOLUME
µ
Each time you press the button:
SLEEP 30_--)SLEEP 60_--)SLEEP 90
^-=SLEEP OFF(=SLEEP 120(_}
Tmperations
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”.
“SLEEP” goes out.
To confirm the remaining time
(While the timer is functioning)
Press [SLEEP].
SLEEP
SLEEP
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to display the remaining time, then press again to se-
lect the required time.
Using the timers together
Any of the timers can be used together, but ensure the unit is off be-
fore the start time for the record and play timers.
36
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the sound range
display
A
»
The sound processor shows the level of each sound range with the
three types of display described below.
SC-EH760
SC-EH560
[SC-EH760]
A
DISPLAY MODE DISPLAY MODE
Press [DISPLAY MODE].
[SC-EH560]
–
UV DEMO
Press [DISPLAY MODE, –ëV DEMO].
The spectrum display will change as follows.
[a] Normal display
This display indicates the strength of the sound in each tonal
range.
SC-EH760 SC-EH560
[b] Peak-hold display
DISPLAY MODE
The peak sound value of each sound range is held on the dis-
play for about one second after it occurs.
-
DISPLAY MODE
UV DEMO
(On the sound processor)
[c] Aurora display
The peak sound value of each sound range is displayed in in-
verted form.
a
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
FLAT
HALL
AI-EQ
M.EQ
b
c
B
»
Muting the volume
HEAVY
CLEAR
Remote control only
FLAT
HALL
AI-EQ
M.EQ
HEAVY
CLEAR
Press [MUTING].
Volume is reduced to minimum.
B
TEST UPRO LOGIC SUPER
DIGITAL
SURROUND S.WOOFER
VCR/AUX/
TAPE/
TUNER/
BAND
CD
¤»
6CH INPUT DECK 1/2
To cancel
⁄/g
¤
Press [MUTING] again.
MUTING
M
N
MUTING
“MUTING” goes out and the volume is restored.
To cancel from the tuner amplifier, turn [VOLUME] to minimum
(–– dB), then raise it to the required level.
Muting is also canceled when the unit is turned off.
∂
VOLUME
µ
(On the tuner amplifier)
Using headphones
(not included)
MUTING
C
»
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing
damage.
C
Plug type: 3.5 mm stereo
Cvefuctions
VOLUME
37
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
External unit connections
A
DVD player with 5.1ch output
SC-EH760
³Turn off all units before making connections.
³Refer to the manual of the other unit for details.
(Cables and equipment not included.)
FRONT L/R
Stereo phono cable (not included)
White
(L)
(R)
SURROUND L/R
Red
Sound
processor
Video connection cable (not included)
CENTER
AUX
(DVD)
DVD 6ch INPUT
CENTER SURROUND FRONT
SUBWOOFER
L/R OUT (MIX)
L
L
L
SUBWOOFER
R
R
R
Connections to SC-EH760
[A] DVD player with 5.1ch output
This unit has the input terminals for 5.1ch surround systems but
it does not have the decoders necessary to play them back. The
DVD player should have these decoders and 5.1ch output.
B
DVD player/Laser disc player
(without 5.1ch output), etc.
SC-EH760
To record sound from the DVD player
Connect to AUX (DVD).
Sound
processor
AUX
(DVD)
Subwoofer
AUDIO
L/R OUT
The included front speakers have subwoofers, but you can en-
hance surround sound from a unit connected to DVD 6ch
INPUT by connecting another subwoofer to SUBWOOFER
OUT (➡ page 24 for operation).
L
R
[B] DVD player/Laser disc player (without 5.1ch output),
etc.
SC-EH560
VCR
(EXT)
This unit has Dolby Pro Logic circuitry. The sound will be repro-
duced with the same powerful stereophonic effects found in
movie theaters.
OUT IN
L
R
[C] Video cassette recorder
You can enjoy the sound from your video cassette recorder.
[D] Television set (For Australia and N.Z. only)
By connecting the video connection cable as shown in the illus-
tration, it is possible to switch both audio and video input with
[INPUT SELECTOR] of this unit.
C
D
SC-EH760
SC-EH560
Video cassette recorder
Sound
processor
Connections to SC-EH560
AUDIO
OUT
AUDIO
IN
VCR
(EXT)
[B] DVD player/Laser disc player etc.
You can enjoy the sound from your DVD player/Laser disc
player etc.
OUT IN
L
R
[C] Video cassette recorder
You can enjoy the sound from your video cassette recorder.
SC-EH760 for
Australia and
N.Z.
Video cassette recorder
Cevfuctions
Sound
processor
VIDEO OUT
VIDEO IN
VIDEO
VCR
OUT
VCR
IN
Television set
MONITOR
OUT
DVD
IN
VIDEO
IN
VIDEO
OUT
DVD player/Laser disc player
38
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Using other equipment
A
»
Listening to an external source
1 Press [INPUT SELECTOR] to select
1
the external source.
Each time you press the button:
[SC-EH760]
A
TUNER>CD>TAPE>VCR (EXT)>AUX (DVD)
^----------------------------------------------------------------------------}
[SC-EH560]
TUNER>CD>TAPE>VCR (EXT)
^----------------------------------------------------}
On the remote control
Press [VCR/AUX/6CH INPUT] (SC-EH760) or [VCR]
(SC-EH560).
2 Operate the unit.
See the unit’s manual for details on operation and connection.
1
INPUT SELECTOR
To enjoy Dolby Digital and DTS
➡ page 24
B
B
»
Recording an external source
1
1 Press [INPUT SELECTOR] to select
the external source.
2 Select Dolby NR and reverse mode.
(➡ page 31)
3 Press [´ REC PAUSE].
4 Press ["] or [!] to start recording.
5 Start the source to be recorded.
4
2 3
See the unit’s manual for details on operation and connection.
To stop recording
Press [º] on the deck.
To temporarily stop recording
Press [´ REC PAUSE].
The deck goes into the recording standby mode.
To resume recording press ["] or [!] with the flashing indicator.
@
Recording onto an external unit
1
2
3
INPUT SELECTOR
DOLBY NR
Select the source to be recorded with [INPUT SELECTOR].
Start recording on the external unit and start playing the source to be
recorded.
Cvefuctions
REV MODE
HREC
PAUSE
4
39
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy karaoke with CDs and
cassettes
(For Australia and N.Z. only)
1 Lower the volume with [MIC VOL] and
2 1
connect the microphone.
Plug type: 6.3 mm monaural
2 Press [KARAOKE] to select a voice
mode.
Each time you press the button:
MONO L>MONO R>VOICE MUTE>(off)
^-----------------------------------------------------------------}
Use this chart to select the appropriate mode.
±: appropriate ´: for practice ——: inappropriate
Software
Karaoke
Sound
ECHO
Non-
4
Voice
modes
Stereo
karaoke
multiplex
MIC VOL
±
1
2
MONO L
(Background
music)
——
——
MIN
MAX
´
(Voice)
MONO R
——
——
——
VOICE MUTE
——
±
´
´
1
2
MIC
(off)
(Background
musiciVoice)
±
(For singing
along)
3 Start playing the CD or cassette.
4 Adjust the main volume and micro-
phone volume.
KARAOKE
MONO·L
To cancel
Press [KARAOKE] to clear the display.
To record your performance
Start recording in deck 2 and then start singing.
Ensure the voice mode is set to off (at step 2 above) when playing the
recording.
MONO·
R
Note
The karaoke modes cannot be used with the radio, 3D AI EQ, 6CH
DISCRETE INPUT or surround effects.
V.MUTE
When using the VOICE MUTE function
Voice mute may not function sufficiently or noise may interfere when
using the following software.
³Monaural software
³Software with few musical instruments, including classic music and
poetry recitations
VOLUME
4
UP
MIC VOL
MIN
Cevfuctions
MAX
DOWN
³Software with duets or strong choruses
Using the echo effect
A
»
A
ECHO
Press [ECHO].
ECHO
Each time you press the button:
ECHO 1>ECHO 2>ECHO 3>OFF
^------------------------------------------------------}
40
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical specifications
Tape speed
Wow and flutter
Fast forward and rewind times
4.8 cm/s
0.16 % (WRMS)
Load impedance
FRONT (High/Mid)
FRONT (Low)
SURROUND
CENTER
S. WOOFER
Center frequency
LEVEL (VOL s20 dB)
SOUND PROCESSOR
º EQ/SFP section
MANUAL GEQ
3-Band parametric EQ
Center frequency
High band
total impedance 6 -
8 -
8 -
8 -
Approx. 110 seconds with
C-60 cassette tape
Frequency response (Dolby NR off)
TYPE I (NORMAL)
TYPE II (HIGH)
TYPE IV (METAL)
S/N (Signal levelumax recording level, TYPE II
type tape)
NR off
Dolby B NR on
Input sensitivity and impedance
REC (IN)
Output voltage and impedance
PLAY (OUT)
º General
Dimensions (WtHtD)
20 Hz–16 kHz (DIN)
20 Hz–16 kHz (DIN)
20 Hz–16 kHz (DIN)
70 Hz
MID i8 dB
MAX i12 dB
3.5 kHz, 5.3 kHz, 8 kHz, 12.5 kHz
Mid band 240 Hz, 390 Hz, 630 Hz, 1 kHz,
1.5 kHz, 2.3 kHz, 3.5 kHz
º Amplifier section [SC-EH560]
Power output (L/R both channel driven)
Low band 70 Hz, 90 Hz, 143 Hz, 240 Hz
Level control
EQ SPACE mode
3 modes
3D acoustic image EQ
3 modes
n1.2, 2.4, 3.6, 4.8, 6 dB
HEAVY, CLEAR, HALL
AI EQ, 3D AI 1, 3D AI 2
56 dB (A weighted)
66 dB (A weighted)
DIN
10 kHz THD 1 %/6 - (High)
1 kHz THD 1 %/6 - (Mid)
100 Hz THD 1 %/6 - (Low)
2k12 W
2k12 W
2k36 W
150 mV/23 k-
RMS 10 kHz THD 10 %/6 - (High) 2k18 W
1 kHz THD 10 %/6 - (Mid) 2k18 W
100 Hz THD 10 %/6 - (Low) 2k54 W
PMPO 1 kHz/Low 6 -, Mid 6 -, High 6 -
1,400 W
º Pre-amplifier section [SC-EH760]
Input sensitivity/impedance
VCR (EXT)
AUX (DVD)
280 mV/360 -
250 mV/15 k-
250 mV/15 k-
294k118.5k281 mm
Mass
2.1 kg
Total harmonic distortion
Output level
Rated power at 1 kHz
Half power at 1 kHz
Load impedance Main (High)
Main (Mid)
1 % (6 -)
0.1 % (6 -)
6 -
FRONT SPEAKER [SC-EH760]
VCR REC OUT
(For Australia and N.Z. only)
VIDEO OUTPUT
MONITOR OUT
VCR REC OUT
º Pre-amplifier section [SC-EH560]
Input sensitivity/impedance
VCR (EXT)
Output level
VCR REC OUT
150 mV/1.5 k-
Type
3 way, 3 speakers
Speaker(s)
Super woofer
Woofer
Tweeter
Impedance
6 -
17 cm cone type
12 cm cone type
6 cm ring shaped dome type
High 6 -
1 Vp-p, 75 -
1 Vp-p, 75 -
Main (Low)
6 -
S. WOOFER
Center frequency
LEVEL (VOL s20 dB)
70 Hz
MID i8 dB
MAX i12 dB
Mid 6 -
Low 8 -
High 60 W
Mid 60 W
250 mV/15 k-
º FM tuner section
Frequency range
Input power (Music)
150 mV/1.5 k-
87.50–108.00 MHz
(0.05 MHz steps)
1.8 ¬V (IHF usable)
1.5 ¬V
º DOLBY PRO LOGIC section [SC-EH760]
Low 120 W
87 dB/W (1.0 m)
120 Hz, 4 kHz
PRO LOGIC mode
CENTER mode
DELAY TIME
SURROUND
NORMAL
20 ms (Fixed)
Sensitivity
S/N 26 dB
S/N
MONO
Antenna terminal(s)
º AM tuner section
Frequency range
Output sound pressure level
Crossover frequency
Frequency range
42 Hz–50 kHz (j16 dB)
46 Hz–36 kHz (j10 dB)
º VIRTUAL DOLBY SURROUND section
70 dB (75 dB, IHF)
75 - (unbalanced)
[SC-EH560]
Mode
º General
Dimensions (WtHtD)
Mass
VIRTUAL DOLBY SURROUND
254k422k260 mm
º AV SURROUND section
522–1629 kHz (9 kHz steps)
520–1630 kHz (10 kHz steps)
6.4 kg
AV surround mode
SIMULATED STEREO
FRONT SPEAKER [SC-EH560]
[SC-EH760] SUPER SURROUND
Sensitivity (S/N 20 dB)
º Timer section
Clock
500 ¬V/m
Type
3 way, 3 speakers
(MUSIC, MOVIE)
Speaker(s)
Super woofer
Woofer
Tweeter
Impedance
º DSP CONTROL section
DSP control mode
Quartz-lock type
Play timer (1 time, daily),
Rec timer (1 time, daily),
14 cm cone type
12 cm cone type
6 cm cone type
High 6 -
SEAT POSITION
Function
[SC-EH760] CENTER FOCUS (1, 2),
[SC-EH760] VIRTUAL REAR SURROUND,
[SC-EH760] MULTI REAR SURROUND,
[SC-EH760] 3D ENHANCED SURROUND
[SC-EH560] CENTER EFFECT (1, 2, 3),
[SC-EH560] SURROUND EFFECT (1, 2, 3)
º Spectrum analyzer section
Display mode NORMAL, PEAKHOLD, AURORA
º General
Sleep (120 min, 30 min intervals)
Setting intervals (Play/Rec)
Mid 6 -
Low 6 -
High 40 W
Mid 40 W
1 minute–23 hours 59 minutes
(1 min intervals)
Input power (Music)
º General
Power supply
(For United Kingdom, Australia and N.Z.)
Low 70 W
84 dB/W (1.0 m)
150 Hz, 4 kHz
Output sound pressure level
Crossover frequency
Frequency range
AC 230–240 V 50 Hz
Dimensions (WtHtD)
(For others)
Power consumption
AC 230 V 50 Hz
[SC-EH760] 205 W
[SC-EH560] 110 W
46 Hz–22 kHz (j16 dB)
50 Hz–20 kHz (j10 dB)
[SC-EH760] 293k89k270 mm
[SC-EH560] 293k89k269 mm
º General
Dimensions (WtHtD)
Mass
Mass
[SC-EH760] 1.5 kg
[SC-EH560] 1.4 kg
Standby
Normal mode
ECO mode
Dimensions (WtHtD)
Mass
254k422k260 mm
11 W
0.5 W
293k118.5k346 mm
[SC-EH760] 5.3 kg
[SC-EH560] 4.3 kg
6.0 kg
TUNER AMPLIFIER
º Amplifier section [SC-EH760]
Power output (L/R both channel driven)
Stereo Mode
CENTER SPEAKER [SC-EH760]
Type
Speaker
2 way, 2 speakers
Woofer
Tweeter
Impedance
Input power (Music)
Output sound pressure level
Crossover frequency
Frequency range
º General
Dimensions (WtHtD)
Mass
10 cm cone type
6 cm cone type
8 -
120 W
85 dB/W (1.0 m)
4 kHz
DIN 10 kHz THD 1 %/6 - (High) 2k20 W
CD PLAYER
º Audio
DA converter
º Pickup
Wavelength
1 kHz THD 1 %/6 - (Mid)
100 Hz THD 1 %/8 - (Low)
2k20 W
2k50 W
1 bit DAC MASH
780 nm
RMS 10 kHz THD 10 %/6 - (High) 2k30 W
1 kHz THD 10 %/6 - (Mid) 2k30 W
100 Hz THD 10 %/8 - (Low) 2k70 W
PRO LOGIC mode
DIN FRONT 1 kHz THD 1 %/TTL Imp. 6 -
(High/Mid) 2k20 W
100 Hz THD 1 %/8 - (Low)
2k50 W
SURROUND 1 kHz THD 1 %/8 - 2k20 W
CENTER 1 kHz THD 1 %/8 - 50 W
º General
Dimensions (WtHtD)
75 Hz–22 kHz (j16 dB)
[SC-EH760] 293k89k288 mm
[SC-EH560] 293k89k268 mm
[SC-EH760] 2.2 kg
250k121k147 mm
1.6 kg
Mass
Rfrnce
SURROUND SPEAKER [SC-EH760]
[SC-EH560] 1.6 kg
Type
Speaker
1 way, 1 speaker
CASSETTE DECK
Deck system
Track system
Recording system
Bias frequency
Erasing system
Heads
Deck 1
(Playback head)
Deck 2
(Recording/Playback head) Permalloy head
(Erasing head)
Motors
Deck 1, 2
Capstan drive
Stereo cassette deck
4 track, 2 channel
AC bias
Full range
Impedance
Input power (Music)
Output sound pressure level
Frequency range
º General
Dimensions (WtHtD)
Mass
8 cm cone type
8 -
60 W
84 dB/W (1.0 m)
RMS FRONT 1 kHz THD 10 %/TTL
Imp. 6 - (High/Mid)
2k30 W
100 Hz THD 10 %/8 - (Low)
2k70 W
100 kHz
AC erase
120 Hz–20 kHz (j16 dB)
SURROUND 1 kHz THD 10 %/8 - 2k30 W
CENTER
1 kHz THD 10 %/8 -
70 W
170k106k118 mm
Permalloy head
PMPO 1 kHz/High or Mid 6 -, Low 8 -
0.9 kg
CENT. 8 -, SURR. 8 -
Total harmonic distortion
Rated power at 1 kHz
Half power at 1 kHz
3,000 W
Note
1. Specifications are subject to change without
Double gap ferrite head
1 % (6 -)
0.1 % (6 -)
notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the
digital spectrum analyzer.
DC servo motor
41
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the
enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers 6.
Common Problems
No sound.
Turn the volume up.
The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the
unit on. 6
Sounds unfixed, reversed or come
from one speaker only.
Check the speaker connections. 6
Humming heard during play.
An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away
from this unit’s cables.
If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s
polarity.
“ERROR” is displayed.
“U70” is displayed.
“F61” is displayed.
Incorrect operation performed. Read the instructions and try again.
Connect the flat cables firmly. If “U70” remains on the display, contact the dealer.
There is a problem with the tuner amplifier. Consult your dealer.
Turn DEMO off. ;
ECO mode on but display still
lights up in standby mode.
“––:––” appears on the display.
You plugged the AC mains lead in for the first time or there was a power failure recently.
Set the time. ;
Listening to the radio
Noise is heard.
Use an outdoor antenna. 7
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
A beat sound is heard.
Turn the TV off or separate it from the unit.
A low hum is heard during AM
broadcasts.
Separate the antenna from other cables and leads.
The correct AM frequency can’t be
tuned in.
Change the frequency step. Hold [TUNER/BAND] down for 10 seconds to change the step to 9 kHz.
When there is a television set nearby
The picture on the TV disappears
or stripes appear on the screen.
The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change
to an outdoor antenna.
The TV antenna wire is too close to the system. Separate the antenna wire of the TV set from the
system.
The cassette deck
Poor quality sound.
Clean the heads. [
Check the Dolby NR setting. B
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N
Rrfnce
42
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
The CD changer or CD player
The display is wrong or play won’t
start.
The disc may be upside down. <
Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard.
Condensation may have formed in the changer or player due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
[SC-EH760]
“TAKE OUT/DISC” appears on the
display.
There is a problem with the CD mechanism. (A power failure may have occurred.)
The tray will open automatically. Remove the CD from the tray, and after ensuring there is no CD in
the tray close it. The unit will make the disc changing noises for a few moments and then it should
operate normally.
During “One touch” editing (➡ page 32)
“DECK NO TAPE” is displayed.
Load a cassette into deck 2. O
“DECK CHANGE TAPE” is
displayed.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N
The remote control
The remote control doesn’t work.
Check the batteries are inserted correctly. :
Replace the batteries if they are worn.
All components are required to service the system. If service is ever necessary, bring the entire system.
Maintenance
If the surfaces are dirty
For a cleaner crisper sound
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
Clean the heads regularly to assure good quality playback and
recording. Use a cleaning tape (not included).
³Never use alcohol, paint thinner or benzine to clean this unit.
³Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Rfrnce
43
RQT5355
Download from Www.Somanuals.com. All Manuals Search And Download.
%
Matsushita Electric Industrial Co., Ltd.
Osaka 542-8588, Japan
RQT5355-B
F0100MF1020
Download from Www.Somanuals.com. All Manuals Search And Download.
|