A_CS90 EN 4/28/04 9:55 AM Page 2
THOMSON
46, quai Alphonse Le Gallo
92648 Boulogne
Cedex FRANCE
5589817A
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 4
Safety Information
BLUE = NEUTRAL / BROWN = LIVE
EN For UK Only
If the colors of the wires in the mains lead of this
apparatus may not correspond with the colored
markings identifying the terminals in your plug,
proceed as follows:
BLUE wire to the terminal coded N (Neutral) or
colored black.
CONNECT THE MAIN LEAD INTO A MAINS
POWER SOCKET
POWER SUPPLY 230V. It must not be
connected to D.C. mains.
BROWN wire to the terminal coded L (Live) or
colored red.
Note: The mains lead of the set is fitted with a
molded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below. The
molded plug cannot be rewired and if removed
must be
DO NOT make any connection to
the terminal in the plug which is
marked by the letter E or by the
earth symbol or colored green or
green and yellow.
disposed of safely.
DO NOT under any circumstances plug the
severed plug into any mains socket as this could
result in electric shock.
A fused plug must be fitted
with a 3A fuse approved by
ASTA or BS1362 and fuse
covers must be always be
securely replaced. If you set
does not work, the fuse may
be blown.
Important: If the plug is removed, rewire the
new plug as follow:
The wires in the mains plug are colored in
accordance to the following code:
The descriptions and characteristics given in this document are given as a general indication and not as a guarantee.
In order to provide the highest quality product possible, we reserve the right to make any improvement or
modification without prior notice. The English version serves as the final reference on all products and operational
details should any discrepancies arise in other languages.
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 5
Safety Information
ADVARSEL!
CAUTION!
EN
USYNLIG LASERSTRÅLNING VED ÅBNING NAR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNGDÅ UDSAETTELSE FOR STRÅLNING.
Invisible laser radiation when open. Avoid
exposure to beam. Class 1 laser product. This
system must be opened only by qualified
technicians to prevent accidents caused by the
laser beam.
VORSICHT!
UNSICHTBARE LASERSTRALUNG
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–
VERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM LASERSTRAHL AUSSETZEN!
CAUTION
–
INVISIBLE LASER RADIATION
LASER λ = 780 nm, P max = 5 mW
Rating Information: At bottom/rear of the unit.
This unit comply with the existing requirements
WHEN OPEN AND INTERLOCKS FAILED OR
DEFEATED. AVOID EXPOSURE TO BEAM.
ATTENTION
–
RAYONNEMENT LASER INVISIBLE
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE
LA SECURITE EST NEUTRALISEE.
EXPOSITION DANGEREUSE AU FAISCEAU.
In accordance with the rating plate of
the unit, this unit complies with
current standards concerning electrical
safety and electromagnetic
compatibility.
Please respect the environment Before
throwing any batteries away, consult
your distributor who may be able to
take them back for specific recycling.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL
A
LASER DE CLASSE
1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Have a Blast- Just Not in Your Eardrums
Make sure you turn down the volume
on the unit before you put on head-
phones. Increase the volume to the
desired level only after headphone are
in place.
VARNING–
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.
BETRAKTA EJ STRÅLEN.
VARO!
AVAT TAESSA JA SOUJALUKITUSOHITETTAESSA
OLET ALTTIINA NÄKYMÄTTÖMÄLLE.
LASERSÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
T H E L I G H T N I N G
CAUTION: TO REDUCE THE THE EXCLAMATION
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
FLASH AND ARROW-
HEAD WITHIN THE
DO NOT REMOVE COVER T R I A N G L E I S
A
TRIANGLE IS
A
WARNING
SIGN
ALERTING YOU OF
T A T
( O R B A C K ) . N O U S E R -
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO Q U A L I F I E D S E RV I C E
PERSONNEL.
WA R N I N G S I G N
ALERTING YOU OF
" D A N G E R O U S
VOLTAGE" INSIDE
THE PRODUCT.
I
M
P
O
R
N
I N S T R U C T I O N S
A C C O M PA N Y I N G
T H E P R O D U C T.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
WARNING:TO PREVENT FIRE OR ELECTRICAL
DO NOT EXPOSETHIS PRODUCT
SHOCK HAZARD,
TO RAIN OR MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 6
Table of Content
Safety Information
Radio . . . . . . . . . . . . . . . . . . . . . . .10
EN
Selecting Tuner Band . . . . . . . . . . . . . . . . . . . .10
Tuning to a Station . . . . . . . . . . . . . . . . . . . . . .10
Manually Setting Presets . . . . . . . . . . . . . . . . .10
Auto Preset Programming . . . . . . . . . . . . . . . .10
Assessing Preset Stations . . . . . . . . . . . . . . . .10
Suppressing Stereo Signal . . . . . . . . . . . . . . . .10
Tuning to an RDS Station . . . . . . . . . . . . . . . . .11
Displaying RDS Station Information . . . . . . .11
Getting Started . . . . . . . . . . . . . . . .2
Unpacking the system . . . . . . . . . . . . . . . . . . . .2
Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Using the Antenna . . . . . . . . . . . . . . . . . . . . .2
Connecting the Speakers . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
General Controls . . . . . . . . . . . . . . .3
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .5
Installing Batteries . . . . . . . . . . . . . . . . . . . . .5
Troubleshooting Tips . . . . . . . . . . .12
Maintenance . . . . . . . . . . . . . . . . .13
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Handling CDs . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cleaning CDs . . . . . . . . . . . . . . . . . . . . . . . . . . .13
CD Lens Care . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Settings . . . . . . . . . . . . . . . . . . . . . .6
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . .6
Setting the Timer . . . . . . . . . . . . . . . . . . . . . . . .6
Activating the Timer . . . . . . . . . . . . . . . . . . .6
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Important Information . . . . . . . . .14
Safety Precautions . . . . . . . . . . . . . . . . . . . .14
Headset Safety . . . . . . . . . . . . . . . . . . . . . . . . .14
Important Battery Information . . . . . . . . . . .14
Don’t Infringe . . . . . . . . . . . . . . . . . . . . . . . . . .14
Technical Specification . . . . . . . . . . . . . . . . . . .14
Sound Features . . . . . . . . . . . . . . . .7
Preset Equalizer Curves . . . . . . . . . . . . . . . . . . .7
X-Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Muting Audio . . . . . . . . . . . . . . . . . . . . . . . . . . .7
CD Player . . . . . . . . . . . . . . . . . . . . .8
Notes on CD-R/RW Disc . . . . . . . . . . . . . . . . . . .8
Loading Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Playing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Skipping Tracks . . . . . . . . . . . . . . . . . . . . . . . .8
Searching Through a CD . . . . . . . . . . . . . . . .8
Random Playback . . . . . . . . . . . . . . . . . . . . . .8
Sampling Tracks . . . . . . . . . . . . . . . . . . . . . . .9
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Setting Up a CD Program . . . . . . . . . . . . . . .9
Playing a Program List . . . . . . . . . . . . . . . . .9
Displaying the Program List . . . . . . . . . . . .9
Deleting Program List . . . . . . . . . . . . . . . . .9
1
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 7
Getting Started
Connecting the Speakers
Unpacking the system
You should have the following:
• one main unit (with 2 main speakers);
• one remote control;
• one user’s guide;
• one Thomson Warranty Card
EN
Match the blue wire (on the left speaker) to blue
terminal for the left speaker (L) on the back of
the unit and the black wire (on the left speaker )
to the black terminal for left speaker (L). Follow
the same procedure to connect the right (R)
speaker.
Speaker Wire Connection
Back View
2
1
Push Speaker terminal tab
down to insert wire.
Release tab to lock wire in
the terminal.
NOTE: Make sure the insulation
is completely removed from the
speaker wires at all connection points.
ends of the
1. FM Pigtail Antenna
2. Main Speaker Jacks
Installation
To ensure sufficient ventilation, keep the spacings
shown below free from other surfaces:
Using the Antenna
Front View
10 cm
Before you use your audio system, you’ll want to
make sure the FM antenna is positioned properly.
The FM antenna is the coiled wire connected to
the back of the unit. Uncoil it, making sure it is
fully extended (you may even want to tape it to
the wall behind the unit, if possible. The higher,
the better.)
ON•ECO
10 cm
10 cm
Side View
5 cm
10 cm
For better AM reception, move or rotate the unit.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 8
General Controls
Main Unit
EN
ON•ECO
Front View
PROG•SET•CLEAR — Enters program mode for
CD and Tuner; Applies new settings for Clock and
Timer modes; Clears program information.
R•D•S — In FM Tuner mode - Enters to select RDS
PTY; radio text (INFO ON/OFF); RDS Clock/day
(SYNC ON/OFF).
ON•ECO — When the unit is on, press to enter
ECO mode. When the unit is in standby mode,
press to turn the unit on .
CLOCK•TIMER — Shows clock time and enters
clock setting mode; Enters timer setting mode;
turns timer on/off.
Tips:
In STANDBY mode (press ON/ECO off), the
system displays the time. Press ON/ECO to
turn the system on in the previously used
mode. Press CD or TUNER to select the
corresponding mode.
PRESET STATION UP
preset station.
— Selects the next
PRESET STATION DN
preset station.
— Selects the previous
X-BASS — Turns X-Bass on or off.
PRESET EQ — Selects among the different EQ
modes.
VOLUME CONTROL — Increases/ decreases
volume.
CD — Selects CD mode.
TUNER•BAND•APP — Selects tuner mode;
Selects tuner bands; Enters auto preset program.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 9
General Controls
Main Unit
EN
Top View
PHONES
TUNING - (SKIP BACKWARD)
mode - Goes to the previous CD track; searches
backwards through a CD.
STOP
PLAY / PAUSE
CD DOOR OPEN•CLOSE
CD door.
— Stops CD playback.
— Plays or pauses CD.
— Jack for connecting headphones
— In CD
— Opens and closes
In Tuner mode - Tunes down radio frequency.
In Clock or Timer mode - Decreases hour and
minute digit.
TUNING + (SKIP FORWARD)
— In CD mode
- Goes to the next CD track; searches forward
through a CD.
In Tuner mode - Tunes up radio frequency.
In Clock or Timer mode - Increases hour and
minute digit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 10
General Controls
prog•set•clear - Enters program mode for CD
and Tuner; Applies new settings for Clock and
Timer modes; Clears program information.
Remote Control
EN
preset station
station.
- Selects the next preset
preset station
preset station.
- Selects the previous
band•app - Selects radio bands; starts auto
preset programming.
vol. + / - - Turns up or down volume level.
stop
- In CD mode - Stops CD playback.
play / pause
- In CD mode - Plays and
pauses CD.
tune
(skip backward) - In CD mode - Goes
to the previous CD track and setting options;
searches backward through CD. In Tuner mode -
tunes down radio frequency; In Clock or Timer
mode - Decreases hour and minute digit.
tune
(skip forward) - In CD mode - Goes to
the next CD track and setting options; searches
forward through CD; In Tuner mode - Tunes up
radio frequency; In Clock or Timer mode -
Increases hour and minute digit.
preset EQ. - Selects equalizer presets.
x-bass - Turns on or off x-bass.
on / eco
- When the unit is on, press to enter
ECO mode. When the unit is in standby mode,
press to turn the unit on .
repeat - Repeats a track or CD in CD mode.
intro - Turns intro mode on or off to play the
first 10 seconds of each track in CD mode.
- Mutes audio output.
CD - Selects CD player.
Installing Batteries
- Turns random playback in CD mode on/off.
display - In CD mode - toggles among displaying
track elapse time, track remain time and disc
remain time.
The remote control must be inserted with 2
“AAA” or “UM-4” or “R03” batteries prior use.
Follow the steps below to ensure correct installa-
tion.
In FM Tuner mode - toggles RDS station
information (RDS name, Radio text, RDS type,
Clock time, RDS day, PI code and Frequency)
R•D•S - In FM Tuner mode - Enters to select RDS
PTY; radio text (INFO ON/OFF); RDS Clock/day
(SYNC ON/OFF).
tuner - Selects radio tuner.
- In tuner mode - Selects between stereo and
mono sound.
sleep - Press to select the time interval in
minutes before the unit turns off automatically.
clock•timer - Shows clock time and enters clock
setting mode; Enters timer setting mode; turns
timer on/off.
1. Remove the battery compartment door
(located at the back of the remote control) by
sliding the compartment door in the direction
of the arrow and then lifting the door out and
off the cabinet.
2. Before inserting the batteries, observe the
polarities (that is, + and -) of the battery, then
relate the polarities to the engraved diagram
inside the battery compartment. Now insert
the batteries.
3. After installation of the batteries, replace and
fit the lid to cover the batteries. Lightly push
it close with a snap.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 11
Settings
3. Press PROG•SET•CLEAR to shift to minute
digits.
Display
EN
4. Press TUNING -
unit or press tune
or +
or
on the main
on the
remote control to set the minutes.
5. Press PROG•SET•CLEAR for source selection.
6. To select source, press TUNING -
on the main unit or press tune
the remote control. (CD or Tuner)
7. Press PROG•SET•CLEAR for volume
adjustment.
or +
or
on
8. To select volume level, press TUNING -
or +
on the main unit or press tune
or
on the remote control.
9. Press PROG•SET•CLEAR for timer off time
setting.
10.To set timer off time, Repeat step 2 to 4.
11.Press PROG•SET•CLEAR to save settings or
STOP to quit setting.
Setting the Clock
1. Press CLOCK•TIMER once to display clock time.
2. Press TUNING -
unit or tune
or +
or
on the main
on the remote
control to set the hour and then press
PROG•SET•CLEAR to shift to minute digits.
Activating the Timer
Press and hold CLOCK•TIMER to turn the timer
3. Press TUNING -
unit or tune
or +
on the main
on the
on/off. The timer icon
when timer is activated.
lights on the display
or
remote control to set the minute.
4. Press PROG•SET•CLEAR to save settings and
STOP to quit setting.
Note:
Timer can not be set or activated if clock
time is not set. SET CLK will flash on the
display when you try to activate the timer.
Follow instructions under “Setting the
Clock” to set clock.
If timer settings have not been entered,
SET TMR will flash on the display when you
try to activate the timer. Follow instruc-
tions under ”Setting the Timer” to enter
timer settings.
Note:
•
When system is ON, you can press
CLOCK•TIMER to display the current
time for about 2 seconds.
Setting the Timer
1. Press CLOCK•TIMER twice until the ON and
clock time is displayed ( ON - timer on time ).
2. To set timer on hour, press TUNING -
If timer off time is set as the same as
timer on time, TIMER NG will flash on the
display. Set the correct timer off time
again.
or
or
+
on the main unit or press tune
on the remote control.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 12
Settings
Sleep Mode
You can select the time interval in minutes before
EN
Adjust Sleep Time
Press SLEEP again when the remaining sleep time
the unit turns off automatically.
is displayed to change sleep time.
Press SLEEP on the remote to select among OFF,
90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes.
(Remote Only)
Note:
Sleep is automatically de-activated when
the unit is turned off.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Sound Features
Preset Equalizer Curves
Muting Audio
Press PRESET EQ to toggle among FLAT,
Press MUTE
on the remote to cut the
CLASSICAL, ROCK, POP and JAZZ.
sound. (Remote Only)
The relative icon lights on the display.
X-Bass
Press X-BASS to turn on/off boosting the bass
frequency. The X-BASS icon is displayed when it
is activated.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 13
CD Player
This unit is compatible with
CD-RW/ CD-R discs for
playback.
CD-R / RW
EN
Tips:
If the CD compartment is not loaded with
a CD or the CD is unreadable, the message
“NO DISC” will be shown.
Notes on CD-R/RW Disc:
•
Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do
not open the disc compartment door while
the disc is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
Playing Discs
• Press PLAY/PAUSE
to begin or pause
playback.
• Press STOP
to stop playback.
• Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
Skipping Tracks
Press SKIP BACKWARD
or SKIP
FORWARD
to skip to the previous or next
track on the disc.
Searching Through a CD
Press and hold SKIP BACKWARD
Note:
or SKIP
Be sure to remove all discs from the disc
compartment before moving or transporting
the unit!
FORWARD
playing.
to search through a CD while it is
Random Playback
Press
to turn on/off random playback.
Loading Discs
1. Press CD to select CD mode.
(Remote Only)
The random icon lights when random playback is
activated.
2. Press CD DOOR OPEN•CLOSE
on the top of
the unit to open the CD door.
3. Insert a disc with the label facing up.
4. Press CD DOOR OPEN•CLOSE
to close the
CD door.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 14
CD Player
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE
Sampling Tracks
Press INTRO to play the first 10 seconds of each
track on the current disc, all discs in the tray, or
turn INTRO mode off. (Remote Only)
EN
.
Displaying the Program List
1. In CD stop mode, press PROG•SET•CLEAR to
enter PROGRAM mode.
2. Press PROG•SET•CLEAR repeatedly to list each
track assignment in the program list.
Repeat
• Press REPEAT on the remote control once to
repeat all tracks.
display.
lights on the
• Press again to play a particular track
repeatedly. icon is displayed.
• Press a third time to de-select the function.
Deleting Program List
In PROGRAM mode, press and hold
PROG•SET•CLEAR for 3 seconds. The system
displays the message CLEAR.
Setting Up a CD Program
Tips:
Tips:
• Press display on the remote control
repeatedly to view elapsed track time,
track number, track remain time and disc
remain time.
You can create a program of up to 20 tracks.
1. In CD stop mode, press PROG•SET•CLEAR to
enter program mode. The next available
program location is displayed “0 PR 1”
Attention:
0PR 1
Do not push and force the CD door close
when the door is opening.
2. Press SKIP BACKWARD
or SKIP
FORWARD to select a track.
3. Press PROG•SET•CLEAR to assign the
selected track to the program location.
The next available program location will then
be displayed. Repeat steps 2 and 3 to program
additional tracks.
The PROGRAM icon is displayed in program
mode.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 15
Radio
Selecting Tuner Band
Auto Preset Programming
EN
1. Press TUNER•BAND•APP on the main unit or
tuner on the remote control to select TUNER.
2. Press TUNER•BAND•APP on the main unit or
band•app on the remote control to select
radio band.
Press and hold TUNER•BAND•APP on the main
unit or band•app on the remote control to scan
stations in selected band. A maximum of 30
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button.
Press any button to stop scanning.
Tips:
Your audio system has 30 preset stations.
Accessing Preset Stations
Press PRESET STATION UP
or DN
to access
the previous or next preset station. The
display first shows the preset program number
and after a few seconds, the frequency will be
displayed. (PR 01 FM is FM preset 1)
Tuning to a Station
Press TUNING -
or +
on the main unit or
tune or
to select frequencies.
Suppressing Stereo Signal
Manually Setting Presets
Press
on the remote control to toggle
between FM mono and stereo for stereo FM
stations. (Remote Only)
1. Press TUNING -
or +
on the main unit
or tune
or
to access the desired
frequency.
3. Press the PROG•SET•CLEAR button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press PRESET STATION UP
or DN
to
select the desired preset number (1-30).
6. Press PROG•SET•CLEAR to store the selected
frequency at that preset.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 16
Radio
• CLASSICS (classical music),
• OTHERM (unclassified music),
• WEATHER (weather, medical),
• FINANCE (stock market reports),
• CHILDREN (children’s programs),
• SOCIAL (sociology, history, georgraphy,
psychology, society),
Tuning to an RDS Station
EN
Note:
RDS stations broadcast on FM only. When
the tuner detects an RDS signal, the RDS
icons turns on.
• RELIGION (any aspect of beliefs, faith and
God or Gods),
• PHONE IN(public forum b phone),
• TRAVEL (feature and programs concerning
travelling),
• HOBBY (recreational activities and leisure),
• JAZZ (jazz music),
• COUNTRY (country music),
• NATIONAL (national music),
• OLDIES (oldies music),
1. Press PRESET STATION UP
select the desired preset station or press
or DN
to
TUNING -
or +
to tune to the desired
frequency.
2. If RDS station found, RDS lights on display with
station name shown.
• FOLK M (folk music),
• DOCUME (documentaries),
• TEST,
• ALARM (alarm).
Displaying RDS Station
Information
Press DISPLAY on the remote control repeatedly
to display station information:
1. RDS name
PTY Search
1. Press R•D•S repeatedly to select “FIND”.
2. Press PRESET STATION UP
or DN
to
toggle the desired RDS station type.
3. Press TUNING -
or +
on the main
on the remote
2. Radio text (RT) “INFO OFF”
Press R•D•S repeatedly to select “INFO OFF”.
unit or tune
or
control to begin searching for RDS
stations in the selected category.
Press PRESET STATION UP
toggle “INFO OFF” and “INFO ON”.
or DN
to
4. clock time (CT) - “SYNC OFF”.
3. RDS type (PTY)
Press R•D•S repeatedly to select “SYNC OFF”.
Press TUNING - or + on the main unit
or tune or on the remote control
• NEWS (news),
• AFFAIR ( news and documentaries),
• INFO (weather, medical),
• SPORT (sports),
to toggle “SYNC OFF” and “SYNC ON”.
• EDUCATE (education),
• DRAMA (series and plays),
• CULTURE (religion),
• SCIENCE (science and technology),
• VARIED (miscellaneous),
• POP M (pop music),
5. RDS DAY
6. PI CODE
7. Frequency
• ROCK M (rock music),
• M,O,R M (middle-of-the road music),
• LIGHTM (light music),
11
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 17
Troubleshooting Tips
EN
Problem Solution
Problem Solution
System will • Check power cord for a secure
CD sound
skips
• Clean the disc.
not turn
on
connection.
• Check disc for warping,
scratches, or other damage.
• Check if something is causing
the system to vibrate. If so,
move the system.
• Make sure the speakers are at
least 3 feet away or on a
different surface from the
main unit.
• Unplug the unit for a moment,
and then plug into power
source again.
• Check the outlet by plugging in
another device.
No sound
• Increase the volume setting.
• Check connection to speakers.
• Check that you have selected
the appropriate function: CD,
Tuner.
CD button
will not
• Switch to another function
(Tuner) and then back to CD.
• Make sure mute is off.
• Make sure headphones are not
plugged in.
respond, or
does not
change
discs when
you press
DISC SKIP
Poor radio • Check antenna connection.
reception
• Move antenna.
• Turn off nearby electrical
appliances, such as hair dryer,
vacuum cleaner, microwave,
fluorescent lights.
Remote
control
does not
work
• Check that the batteries are
properly installed.
• Replace weak batteries.
• Check the system is plugged
into power source.
• Point the remote directly at
the system’s front panel.
• Move closer to the system.
• Remove any obstacles
between the remote and the
system.
CD does
not play
• Check that CD is in the tray.
• Check that CD label is facing up.
• Check that PAUSE mode is not
on.
• Check that CD function is
selected.
• Use CD lens cleaner.
• Clean the disc.
• Try another CD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 18
Maintenance
Disconnect the audio system from the power
source before performing any maintenance.
Cleaning CDs
EN
• Dirty CDs can cause poor sound quality. Always
keep CDs clean by wiping them gently with a
soft cloth from the inner edge toward the
outer perimeter.
• If a CD becomes dirty, wet a soft cloth in water,
wring it out well, wipe the dirt away gently,
and then remove any water drops with a dry
cloth.
Cleaning
Clean the exterior of the system using a soft dust
cloth.
• Do not use record cleaning sprays or antistatic
agents on CDs. Also, never clean CDs with
benzene, thinner, or other volatile solvents
which may cause damage to disc surface
CD Player
CAUTION! This system operates with a laser. It
must be opened by only a qualified technician.
Handling CDs
CD Lens Care
• Do not touch the signal surfaces. Hold CDs by
the edges, or by one edge and the hole.
• Do not affix labels or adhesive tapes to the
label surfaces.
• Do not scratch or damage the label.
CDs rotate at high speeds inside the player.
• Do not use damaged (cracked or warped) CDs
When your CD lens gets dirty it can also cause the
system to output poor sound quality. To clean the
lens you will need to purchase a CD lens cleaner
which can maintain the output sound quality of
your system. For instructions on cleaning the CD
lens, refer to the ones accompanying the lens
cleaner.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
A_CS90 EN 4/28/04 9:55 AM Page 19
Important Information
• Any battery may leak electrolyte under the
following circumstances:
Safety Precautions
EN
• Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a trained
technician.
• Never operate this product with the cabinet
removed.
• Do not use your System immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system to
malfunction.
• Keep your unit away from humid areas and
abnormally hot places.
• Do not touch the player with wet hands. If
any liquid enters the player cabinet, take the
player to a trained technician for inspection.
• This compact disc player uses a laser to read
the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a
record player. Although this product
incorporates a laser pick-up lens, it is
completely safe when operated according to
directions.
• Discs rotate at high speed inside the player. Do
not use damaged, warped, or cracked discs.
• Do not touch the pick-up lens which is located
inside the disc compartment. To keep dust
from collecting on the pick-up lens, do not
leave the compartment door open for an
extended period of time. If the lens becomes
dirty, clean it with a soft brush, or use an air
blower brush designed for camera lenses.
• The apparatus shall not be exposed to dripping
and splashing.
- if mixed with a different battery type,
- if inserted incorrectly,
- if all batteries are not replaced at the same
time,
- if disposed of in fire, or
- if an attempt is made to charge a battery not
intended to be recharged.
Headset Safety
• Do not play your headset at high volume.
Hearing experts warn against extended high-
volume play.
• If you experience ringing in your ears, reduce
volume or discontinue use.
• You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air designed to
let you to hear outside sounds, do not turn up
the volume so high that you are unable to
hear what is around you.
Don’t Infringe
This product should only be used for the purposes
for which it is sold, that is, entertainment, violat-
ing no copyright law. Any attempts to use this
product for which it is not intended is unlawful
and therefore not condoned by Thomson.
Technical Specification
Power supply: 230V~50Hz
Dimensions ( H x W x D mm):
Unit size - 91 x 214 x 264
Speaker - 133 x 120 x 145
Important Battery Information
• Remove the batteries to avoid leakage if you
do not use your remote control for more than
one month.
CD player: Response curve (+/- 2dB): 60Hz to
15kHz
Rating Plate: Look for it at the back of the set.
• Discard leaky batteries immediately as leaking
batteries may cause skin burns or other
personal injuries. Dispose of batteries in the
proper manner, according to provincial and
local regulations.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|