DTH700_EN 13/08/02 15:25 Page 1
Precautions
Setting up
Ensure that the mains supply in your house complies with that indicated on the identification sticker located at
the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around
it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy
equipments on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty.
This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not
disconnect the electricity supply. In order to separate the player completely from the mains, it has to be
disconnected by unplugging the mains plug, especially when left unused for a long period of time.
EN
Caution
Protect the player from moisture and excess heat (e.g. fireplace) or equipment creating strong magnetic or
electric fields (i. e. speakers ...). Disconnect the power cable from the mains electricity supply if the player
malfunctions. Your player is not intended for industrial use but for domestic purposes only.
Use of this product is for personal use only. Copying CDs or downloading music files for sale or other business
purposes is or may be a violation of copyright law.
DISCLAIMER OF WARRANTY: TO THE EXTENT ALLOWED BY APPLICABLE LAW.
REPRESENTATIONS AND WARRANTIES OF NON-INFRINGEMENT OF COPYRIGHTS OR OTHER
INTELLECTUAL PROPERTY RIGHTS RESULTING FROM THE USE OF THE PRODUCT UNDER
CONDITIONS OTHER THAN AS HEREABOVE SPECIFIED ARE HEREBY EXCLUDED.
Condensation
If your player or a disc have been stored in a cold atmosphere, as for example during transportation in the winter,
wait for approximately 2 hours until they have reached room temperature.
For your safety
Never open the player or any of its components. It can be dangerous for you or for certain fragile components.
You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of the
disc tray or any other opening to look inside the player.
Discs
Always handle your discs with care. Hold a disc with fingers on the border or hole. Always place disc with the
label facing upward (in case of a single-sided disc). Always place the disc properly into the tray using the proper
guide area. Always use a soft cloth to clean discs if necessary, wipe from the centre to the border. Always put
discs back into their cases after playing and store in a vertical position. Never try to play a Photo CD. Never use
record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty. Wipe
gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular scratches are
likely to occur and could cause noise during playback.
DVD copy protection
In accordance with the DVD standard, your DVD player is equipped with a Copy Protection system, which
can be triggered on and off by the DVD disc itself, in order to make any recording of the concerned DVD disc
onto a videotape of very poor picture quality, or even impossible. “This product incorporates copyright
protection technology that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home use only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.”
Dear customer,
Please note that when this product will reaches the end of its service life, you will need to take responsibility for
any special handling needed in its disposal.
THOMSON multimedia shall not be responsible if the player is not used according to this manual.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:25 Page 3
Contents
Player connections and
initial settings
Operation
Advanced functions
Precautions.....................................................1
Play modes..............................................17-18
• Automatic or Standard playback
• Random play • Programming playback
• Programmed play
EN
Discs you can play .......................................2
Initial setup.................................................4-5
• Before you start
• Initial setup of your remote control
• Initial setup of your DVD player
Repeat playback / Sequence marking...19
• Repeat play • Repeat playback of a
scene between two points • Sequence
marking
Other connections ....................................6-7
• Connections
• Connections example
Other functions...........................................20
• Video CD - Playback control menu
• DVD - Camera angles
Remote control..............................................8
Front panel display.....................................9
• DVD and Video CD - Zoom
Menus and banners ............................10-11
• Selecting menu functions and options
using the remote control navigation keys
• Titles, chapters • Audio language,
Reading JPEG and MP3 files ...............21
• Reading JPEG files
• What’s MP3?
• MP3 CD Playback
• Song skip
Subtitle languages • Sequence marking
• Angles • Repeat • Playback • Introscan
Audio DVD playback ...............................22
• about Audio DVDs
Display menu...............................................12
• Picture format • Front Display • PAL or
NTSC television • Progressive Scan
(Progressive Scan)
•
Groups Browser (Browse)
•
CD-Rs and MP3 files................................23
• About CD-R discs
Sound menu ................................................13
• Sound Logic • Virtual Surround • Digital
audio output
• About MP3 files copied onto CD-Rs
Preferred languages.............................24-25
• Language of player menus
Channels 5.1 adjustments.......................14
• Language of disc menus
• Speakers • Distance
• Language of the dialogues
• Language of the subtitles
lock .................................................................26
• Lock Player
Playing your discs
DVDs, audio CDs
• Ratings limits
Appendix.......................................................27
• Troubleshooting guide
Basic functions .......................................15-16
• Loading a disc
• Technical data
• The fused plug
• If you encounter difficulties
• Playing a disc
• Quick search of images or a track
• Still picture and frame advance
• Slow motion • Titles, chapters, time
elapsed, audio and subtitles
Universal remote control (TV-HIFI)..28-29
• Universal remote control setting - Keys
that can be used
• Brand codes information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:25 Page 4
Initial setup ...
Before you start
Thank you for purchasing one of our videos. Unpack the set completely and tear off the protection films.
DVD player
Remote control
2 non-rechargeable batteries (AA type)
Scart/peritel cable
Instructions for installation and use
Initial setup of your remote control
1
2
3
Insert two LR06 or AA batteries in the remote control as shown opposite.
Do not mix different types of batteries or new and old batteries. Do not use rechargeable batteries. In order
to avoid any risk of explosion, observe polarities indicated inside the battery compartment. Replace only
with the type of batteries specified above. Do not throw them into fire, do not recharge them. If you are not
using the remote control for a long period of time, remove the batteries.
Please respect the environment and prevailing regulations. Before you dispose of batteries ask your
dealer whether they are subject to special recycling and if he accepts to take them back.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:25 Page 5
Initial setup of your DVD player
BASIC CONNECTIONS
You have several connection possibilities, depending on the devices you have. Here, we give you the
recommended connection setup. For other connection setups, refer to the next page.
EN
United Kingdom,
Ireland
2
230 V ~50 Hz
Continental
Europe
DIGITAL
OUT
5.1 CH SURROUND
FRONT REAR
COMPONENT
VIDEO OUT
AUDIO
OUT
L
EXTERNAL
INPUT
COAXIAL
Pr
Pb
Y
L
DIGITAL
OUT
S-VIDEO
R
R
COMPONENT/
PROGRESSIVE
SCAN
SCART
TO TV
CENTER WOOFER
OPTICAL
VIDEO
PROGRESSIVE
S-VIDEO
OUT
VIDEO
OUT
OUTPUT
SCAN
AV1, AUX 1, EXT 1
television socket
1
RGB-compatible scart/peritel cable
(21 cabled pins).
Always switch off the devices before you connect them.
INITIAL PLAYER SET-UP (BASIC SETTING)
1. Turn on your TV set.
2. Turn on your DVD player by pressing the STANDBY / ON button (on the front panel).
The first time you turn on your player, it will ask you to
select a preferred language for the various displays via
the menu which appears on your TV screen. If this menu
is not displayed, on your TV screen select the AV socket
to which you connected your player. The player menus
as well as the dialogues and subtitles of the DVDs will
always be presented in the language you’ve chosen if it
is available on the discs played.
3. Select the language using Navigation keys on the
remote control then press ok to confirm.
You can now watch a DVD or listen to an audio CD. However, we recommend you complete the
initial player set-up in order to adapt its performances to those of your other devices. See pages
12 to 13.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:25 Page 6
Other connections
The connection setup shown on page 5 provides a rapid connection of your player. This setup
gives standard-quality sound reproduction and an optimum-quality picture (RGB). You may
need to use other connection setups suited to the connectors available on your other devices or
to get maximum performance out of your player. Your player has other sockets for these
purposes.
DIGITAL
OUT
5.1 CH SURROUND
FRONT REAR
COMPONENT
VIDEO OUT
AUDIO
OUT
L
EXTERNAL
INPUT
COAXIAL
Pr
Pb
Y
L
DIGITAL
OUT
S-VIDEO
R
R
COMPONENT/
PROGRESSIVE
SCAN
SCART
TO TV
CENTER WOOFER
OPTICAL
VIDEO
PROGRESSIVE
S-VIDEO
OUT
VIDEO
OUT
OUTPUT
SCAN
8
1
2
3
4
5
6
7
1 Digital Audio Out sockets (optical or coaxial) 4 S-VIDEO Out sockets (Ushiden signals Y/C):
to amplifier or TV.
to AV amplifier or TV.
(1)
2 SCART/PÉRITÉLÉVISION output
:
RGB
5 Digital audio output vto channels 5.1 amplifier.
output to AV amplifier or TV if button 3 is set to
SCART or on CVBS if button 3 is set to another
position.
6 Progressive Scan output (Y, PB, PR) : to TV or
devices equipped with equivalent inputs with
button 3 on COMPONENT VIDEO OUT.
3 VIDEO OUTPUT is used to select the type of
output signal: SCART for the TV connection
7 Composite Video Out sockets (CVBS): to AV
amplifier or TV (standard-quality picture).
(Scart/Peritel)
COMPONENT VIDEO OUT connections (6), or
S-VIDEO for the S-VIDEO OUT connection (4).
(2),
COMPONENT
for
8 Analogue Audio Out sockets to stereo
amplifier.
Connections
The table below lists the connectors and quality of your player’s output signals. Select one of the 4
connection setups shown for video connection and one of the 3 connection setups shown for audio
connection.
Video connections (picture)
Picture quality
Type of connector used
***
***
**
• TV socket (2) (SCART socket – RGB signals)
• Components sockets Y, Pb, Pr (6) (RCA sockets - signals Y, PB, PR)
• S-VIDEO OUT socket (4) (Hosiden socket- Y/C signal)
• VIDEO OUT sockets (7) (RCA sockets- CVBS signal)
*
Connection through the scart socket supplies
both video and audio signals. If you choose the
connection using a scart cable, you don’t need to
connect any other sockets. Make sure that button
3 at the back is positioned on SCART and that
your TV set supports that type of signal.
If the connecting cables are not supplied with
your player, get good-quality cables, preferably
well-known brands.
1.
1.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 14/08/02 16:17 Page 7
Connections example
Video recorder
Scart cable*
EN
Your DTH 700
TV
Scart cable*
Video projector
Video recorder
AV Cable*
Scart cable
Your DTH 700
Audio/Video amplifier
or
or
Optical Cable*
Coaxial Cable*
or
Audio Cable*
* : not provided
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 8
Remote control
• Displays (or hides) the dialogue language
• Displays (or hides) the subtitle language.*
(k page 24)
and sound format.* (k page 23)
• Displays the functions banner.
• Starting or stopping the Surround
Virtual Sound (1) available on two
AUDIO OUT L and R (2) sockets at
the back of the device. (k page 6)
(k page 11)
• Switches off the unit (placing it on
stand-by).
• Opens and closes the player’s
disc tray.
• Displays the contents of a
DVD*. (k page 10)
• Displays the sequence marking
function (Video DVD and
Audio CD) (k page 19).
• Displays the viewing angle
selection function on a
DVD*. (k page 20)
• Direct access to Play mode
from the functions banner
(k page 11).
• Navigation keys:
- Selects a function in a menu
or banner,
• Repeats the last scene.
Each press steps backward
10 seconds during DVD
playback (Video DVD).
- ok key to validate a selection.
• Displays the disc menu (if
available) during playback
or when resuming
• Place the selector on the
dvd to control your
DTH 700.
playback. (k page 10)
• Skips forward or backward
a chapter (DVD) or track
(CD).
• Returns to the previous
menu or hides a banner.
• Inputs digital values
(k page 16).
• TV Sound level.
• Returns to the previous
menu or hides a banner.
• Plays a disc.
(k page 15)
• Fast forward or backward.
Fast playback (forward or
backward).
• Frame-by-frame advance in
FRAME mode.
•
Pause playback, and switch
to Frame advance mode.
(k pages 15-16)
• Temporarily or completely
halts disc playback (press
once or twice).
• Enlarges the picture during
playback, slow motion or
pause mode. (k page 20)
The Surround Virtual Sound simulates the
effects of a multichannel audio system on the two
paths of a stereophonic system.
1.
* If available on the disc being played.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 9
Front panel display
1. STANDBY/ON
6. SCAN: Fast forward (8) or fast reverse
(7) (k page 15) and Progressive Scan
(k page 12) function cancellation.
Player on stand-by: Indicator light on.
Player on: display lit.
2. Disc tray.
7. SKIP: To skip a chapter forward (:) or
3. OPEN/CLOSE: To open and close the disc
backwards (9). (k page 15)
tray.
8. Front panel display
EN
4. PLAY/PAUSE: To read the disc, pause on a
still frame (DVD) or pause audio playback
(Audio or MP3 CD).
9. AUDIO ONLY: Cuts off all output to Video
connections for Audio DVDs.
10. PHONES: Headphone connection.
-VOLUME+: Adjusts the headphone volume
level.
5. STOP: To stop playback.
Player keys
1
2
3
4
5
6
7
10
9
8
11
12
13
15
14
On the display
11. Disc in the player:
13. RANDOM : Random playback.
ALL
: Looped disc playback function.
: Repeat playback between two points.
: Repeat playback of the audio track.
: Video DVD
: Audio DVD
CD : Audio CD
14. Time elapsed
MP3 : CD-R containing MP3 files
- DVD k hours, minutes, seconds.
- Audio CD k minutes, seconds.
VCD : Video CD.
- PAUSE : Pause playback.
15. Lits and turns according to Play mode
(normal, fast, slow).
12. PROG. : Programmed playback is being
used.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 10
Menus…
The functions of your DVD player are not all accessible directly through the remote control or
front panel keys. A certain number of functions are accessible through menus that you can
display or remove as you wish. These menus are used as follows:
Player menu (1)
Automatic playback:
Automatic playback:
ON (k page 17).
OFF (k page 17).
Disc Menu (2)
The player menu enables you to
configure the player (languages of the
menus and disc, audio outputs,
display modes), to choose the Play
mode and lock the player.
1.
2.
The appearance and contents of the
menus vary according to the DVDs
(follow on-screen instructions).
or
or
Selecting menu functions and options using the remote control
Navigation keys
1. Display the menu by pressing the menu key (disc loaded = Disc Menu) or
STOP key (= Player Menu).
2. Select a menu or function by pressing the Navigation key.
3. Validate your selection by pressing ok.
4. Change Settings, by pressing the Navigation keys.
5. To exit the menus, press menu (or title (Disc Menu)) or go back to the
previous menu by pressing return (Player Menu).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 11
Navigation
keys
… and banners
In addition to menus, your player also has banners which display the main settings related to disc
playback and operation.
1. Load a disc and press PLAY to start playback.
2. To display the banner, press the yellow info key.
3. Choose an icon using the Navigation keys or enter a digital value with the number keys to access
EN
a chapter or a title.
4. To remove the banner, press the yellow info key.
With a Video DVD or Audio DVD
Chapter (Video DVD) or Track (Audio
To reframe the DVD image according to the screen format
DVD) currently being played (k page 16).
of your TV.
To memorise and use markers
on a Video DVD.
Title (Video DVD) or Group
(Audio DVD) currently being
played (k page 16).
To choose the
(k page 19).
subtitle language
(k page 25).
To change the viewing
angle (Video DVD)
(kpage 20).
To browse the
images associated
with an Audio DVD.
To repeat the
playback of a
title, chapter,
To choose the dialogue language and audio forma
(Video DVD) (k page 25).
To choose between stereo or 5.1 multichannel sound for an
Audio DVD.
track, scene or
entire disc
(k page 19).
With an audio CD
Track 1 currently being played
To repeat the playback of a disc or music track
(k page 19).
(k page 16).
To select the play mode
INTROSCAN - To play the first 10 seconds of
(Standard, Random, Program)
each track.
(k pages 17-18).
To memorise and use the markers (k page 19).
With a VCD (Video CD)
Title currently being
played (k page 16).
To select the PBC function (k page 20).
To select the audio channel
Stereo, Left, Right.
To repeat the playback of a disc or a track
(k page 19).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 12
Navigation
keys
Display menu
The Display menu provides you with settings to adapt the picture format and TV standard
(PAL/NTSC) to that of your TV set. You can also adjust the brightness of the player’s display
panel and activate the Progressive Scan function.
When the player menu is displayed (in stop mode):
1. select Display using the Navigation keys,
2. press ok to validate,
3. select a function using the Navigation keys,
4. adjust the setting using the Navigation keys.
Picture format
Depending on the format of the DVD being played, use the TV image function to choose the format
of the picture which best suits the format of your TV screen (2) - letterbox format 16 x 9, or standard
format 4 x 3.
• With a letterbox format TV (16x9), select 16 x 9 widescreen. Films in 16x9 will be fully
displayed. Films in 4x3 will have vertical black bands on each side of the picture.
• With a 4x3 television, select 4 x 3 Letterbox to take advantage of the pictures recorded in that
format (3) or 16x9. Select 4 x 3 Standard to take advantage of a 4x3 picture without distortion.
For films in 16x9, the edges of the picture may extend beyond the edges of the screen.
2. On certain DVDs, the picture format cannot be
3. Horizontal black bands at the top and bottom of
changed.
the screen.
Front Display
Depending on the brightness of the room where you’ve installed your player, select one of the 4
settings to adapt the brightness of the display panel to suit its environment.
• Select Front Display, validate with ok then tick one of the Dim for Movies, Off for
Movies, Always Bright, Always Dim adjustments.
PAL or NTSC television
If the picture on the DVD being played appear in black and white on your TV screen, the standard
of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to
NTSC (1) or vice versa. NTSC must be selected if the TV is connected to the player through the Y, Pr
and Pb connections.
• Select PAL/NTSC then with the ok key choose PAL or NTSC.
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
1.
Progressive Scan (Progressive Scan)
• To display images on a TV equipped with the Progressive Scan function, you must activate this
function on your player by setting the Progressive Scan line to On (only available when NTSC
is selected and the selector (marked (3) on page 6) at the rear of the player is positioned on
COMPONENT).
Warning: If you select Progressive Scan - On in the Display, menu, video output from the
other Scart and RCA connections will be deactivated. To reactivate video output from the other Scart
and RCA connections, you must press and hold down the SCAN button (8) on the front of the player
for several seconds (5 secs.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 13
Navigation
keys
Sound menu
The Sound menu provides you with settings so you can adapt your player to the devices
connected. It also enables you to access specific functions.
When the player menu is displayed (in stop mode):
1. select Sound using the Navigation keys,
2. press ok to validate,
EN
3. select a function using the Navigation keys,
4. adjust the setting using the Navigation keys.
Sound Logic
This function is designed for modifying a disc’s sound output by boosting or attenuating certain settings.
For night-time listening, use dynamic compression to avoid disturbing your neighbours. The player then
adjusts the differences in sound levels. It becomes easier to hear soft sounds while the louder sounds are
dampened.
• Select Sound then Sound Logic, and press ok to validate. Select None Aucun if you want to
retain the original sound, Compressed to dampen differences in sound levels by using digital
compression, or Voice+ to boost the central channel’s sound in 5.1 multichannel playback.
(1)
Virtual Surround (SRS - TruSurround)
This function provides you with virtual reproduction of the multichannel sound of a Dolby or DTS
film onto the two channels of your TV or stereo amplifier. The sound effects of a 5.1 system are then
simulated.
• Select Sound then Virtual Surround and position the function on On with the ok key.
Digital audio output
Depending on the audio device connected to the digital output (coaxial or optical), you should
parameterize your DVD drive with the help of the following instructions.
• Select Digital Output, then configure all settings (Dolby Digital, DTS), using the
Navigation keys.
Select DOLBY or DTS if your player is connected to an
amplifier with an integrated Dolby DTS decoder.
If the DVD disc contains an audio format of higher
quality than 48kHz/16bit (maybe 96kHz/ 24bit), the
player has to convert into a format compatible with
DAT or MD.
3.
4.
and the
symbol are
1.
2.
DTS is
a
digital sound compression
DIGITAL OUT
registered trademarks of SRS
technique developed by Digital Theater
Inc. The TruSurroundTM technology is
manufactured under license from SRS Inc.
Sound Systems for digital audio
multichannel signals.
"DTS" and "DTS Digital Out" are registered
trademarks of Digital Theater Systems inc.
Dolby Digital is
a
sound
compression technique elaborated by Dolby
Laboratories for digital audio multichannel signals.
The Dolby Digital system enables any audio
PCM
If the device connected to the DIGITAL AUDIO
OUT sockets does not support Dolby or DTS
signals, your player will deliver PCM (Pulse Code
Modulation) signals. In that case, neither Dolby
Digital, nor DTS must be ticked.
The linear PCM is a signal recording format used
for CDs. CDs are recorded in
channel configuration, from
a
stereo sound (2
channels) up to the digital “surround” sound 5.1.
«Dolby Digital» and the double-D symbol are
trademarks of Dolby Laboratories Licensing
Corporation. Copyright 1992 Dolby Laboratories
Inc. All rights reserved.
44.1kHz /16bits. DVDs are recorded in 48kHz / 16
bits, or even up to 96kHz / 24 bits.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 14
Navigation
keys
Channels 5.1 adjustments
The adjustments on this page allow you to adapt your DVD drive to 5.1 audiooutputs used to
connect an amplifier. You will thusdetermine the adjustment of the speakers connected to the
amplifier.
When the player menu is displayed (in stop mode):
1. select Sound using the Navigation keys,
2. press ok to validate,
3. select a function (Speakers or Distance) then validate with ok,
4. adjust the setting using the Navigation keys.
Speakers
The loudspeaker settings enable the player to direct the bass sounds (low frequencies) to the
subwoofer or to the loudspeakers that will best reproduce the acoustic effects intended by the disk
publisher. Your player cannot allow certain settings that would be inconsistent with optimum use of
your Home Cinema equipment.
Front: select Large (1) or Small according to the size
of the speakers.
Center: select None, if you have not connected a
central speaker. Select Large (1) or Small according to
the size of the speaker.
Subwoofer: select None if you have not connected a
bass box. If you have select Yes.
Surround: select None, if you have not connected
back speakers. Select Large or Small, depending on the
size of the speakers.
Installation of speakers. It is recommended that
1. Large: the bandwidth of the speakers should
you place your back speakers in such a way that
they are closer to the spectator than the front
and central speakers.
cover the lowest frequencies (less than
50Hz).This is generally the case with big
speakers.
Distance
This function enables optimisation of the “audio image” of DVDs according to the distance of the speakers
from the listening area.
Front: adjust the distance between the spectator and the
front speakers (2) (from 1.5 to 6 meters).
Center: adjust the distance between the spectator and the
central speaker (3) (from 1.5 to 6 meters).
Surround: adjust the distance between the spectator
and the back speakers (3) (from 1.5 to 3 meters).
2. The distance of the front speakers should not be
3. The distance cannot be adjusted if you selected
less than that chosen for the central speaker.
"None".
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 15
Navigation
keys
Basic functions
Loading a disc
1. Open the disc tray by pressing the OPEN /
Loading a “single-sided” disc.
CLOSE key.
2. Insert a disc. The disc label must face
upwards (Audio CD, Video CD, single-
sided DVD (1), etc.).
EN
3. Close the disc tray by pressing the OPEN /
CLOSE key.
Double-sided discs have a small label on both
1.
sides near the centre. With most DVDs, a disc-
specific menu appears. In that case, follow the
instructions.
Playing a disc
Disc playback starts as soon as the tray is closed (if programmed k page 17). If it doesn’t start
automatically, press PLAY.
• With a DVD, the disc menu appears. Press ok to start playback or select another option (4), in the
disc menu using the Navigation keys. To validate your selection, press ok.
• With an audio CD or video CD, playback starts.
To access a specific CD track, DVD title or chapter, press the info key to display the Info banner
(k page 11) or press pr +.
To stop playback momentarily (2) press STOP once. Press twice to stop it completely (3)
.
The player has memorised the last scene on the
disc. If you now press PLAY: playback starts
from this point. To erase Resume memory,
press STOP. Your player records which was the
last scene it played in the last DVD.
If the player is left in STOP mode for more than
2 minutes without any user interaction, a screen
saver will be activated (fade in / fade out). After
several minutes in STOP mode, the player
switches off automatically without you needing
to do anything.
2.
3.
Resume memory does not work with interactive
discs (without elapsed play time information).
Depending on the DVDs, it may be possible to
change the language during playback
(k page 25).
4.
Quick search of images or a track
In Play mode, start the Forward or Reverse fast motion playback (1) using the FWD or REV keys (2)
.
1. Press once or several times for higher speeds.
• In search mode, no sound is heard on DVDs.
2.
You can also use the player keys.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_flash_News 14/08/02 16:04 Page 16
Navigation
keys
Some Video DVDs contain several titles. These titles correspond to films, documentaries or
other programs. As a general rule, each title is divided into numbered chapters. Audio DVDs
contain groups of tracks. On audio CDs, the music tracks can be accessed directly. Video CDs
may also contain Indexes.
Still picture and frame advance (DVD and Video CD)
Press once on PAUSE (1) to put the film on pause.
Press on PAUSE a second time then on the REV or FWD key to visualise the images one after the
other.
1. Video CDs and DVDs. After 2 minutes in PAUSE mode, the screen saver is activated.
Slow motion (DVD and Video CD)
Press PAUSE then FWD or REV (1) to view one frame at a time either forward or backwards.
Press once or several times for higher speeds.
1.
Titles, chapters, time elapsed, audio and subtitles
From the banner, you can access certain functions directly using the Navigation keys. Choose a title
or a chapter (DVD), or a track (CD). Change the language of DVD dialogues or subtitles.
For direct access to a specific scene on the disc, select the first icon with the Navigation keys. Enter
the requested place in the scene (expressed in hour, minutes, seconds) with the remote control
number keys. (enter 001205 to access a scene which is 12 minutes and 5 seconds away from the start
of the disc (DVD) or track).
• This symbol is sometimes displayed. It
indicates that the function is not available or
that the key used is incorrect.
• A question mark in the counter zone indicates
an input error.
• With certain discs, direct access to a scene is
not possible even if the time elapsed is shown
on the banner.
?
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 17
Navigation
keys
Play modes
Your player has several Play modes: Standard play which follows the order of the tracks, titles
and chapters on the discs; Random play which plays the sequences or music tracks in a
random order; Program play which allows you to choose the sequences or music tracks and
the order in which they are to be played; Auto play which starts playback as soon as the disc
tray is closed.
EN
Load a disc and press STOP. The player menu
appears.
1. select Play Mode using the Navigation keys,
2. press ok to validate,
3. select a function using the Navigation keys,
4. adjust the setting using the Navigation keys.
Audio DVD
Audio CD
Video DVD
CD MP3
Video CD
Standard play
Random Play
Program Play
Edit Program
Auto Play
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Introscan
Bonus Group
x
• For the display and use of the menus, refer to
page 10.
• The functions available in each Play mode
depend on the type of disc played (DVD,
Video CD, Audio CD, etc.).
Auto Play or Standard playback
Choose Auto Play On with the ok key if you wish the disk to be automatically read after closing
the drawer. If you select Auto Play Off, you will need to press PLAY to start playback.
Random play (Audio CD)
Choose Random Play (1) with the ok key to listen to audio CD (2) or to watch a DVD in any order
determined by your drive.
Random play is not available if the Lock Player
function is enabled. It does not work with Video
CDs.
Audio CD - This function can also be accessed
through the banners (k page 11).
1.
2.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:26 Page 18
Navigation
keys
Programming playback
To use the programmed play function, you must first make up the list of music tracks (Audio CD or
MP3 CD) or chapters (DVD) you want to play. You can memorise up to 20 tracks or chapters.
Load a disc and press STOP. The player menu appears.
1. Select Edit Program with the Navigation
keys then validate with ok. The programming
menu appears.
2. Follow instructions a, b, c, d to make up your
selection.
a. Choose a title then a chapter (or a track only for an
Audio CD or MP3 CD) using the Navigation
keys or the remote control number keys.
b. Select Add (1) then press ok to validate. Check that the title has been memorised in table (2)
.
c. Repeat steps a and b as many times as you wish.
d. Select Play and validate by pressing ok to start programmed playback (2)
.
To remove a section or range select it in the list
then select Delete and validate with ok. If you
wish to insert a title between 2 other titles, Add
will be replaced by Insert.
With an audio CD, the track of the song and its
playing time will appear in the table. With a
DVD, the title and chapter numbers will be
displayed in the table.
1.
2.
3.
To exit the programming function, press the
return key on the remote control.
Program play (for DVDs and Audio CDs)
Select Program Play if you want to listen to an audio CD or watch a DVD in the order that you
have pre-programmed using a list (1). To choose the reading order see above and display the list by
selecting Edit Program.
If you haven’t made up your list, program play will not be possible.
1.
Bonus access (for Audio DVDs)
Some Audio DVDs offer hidden information that you can only access after you enter a password (1).
Select Bonus Group and press ok to validate. Enter the password and then enjoy the Bonuses
offered on the disc.
The password is generally shown on the disc cover or can be found on the disc publisher’s Web site.
1.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 19
Navigation
keys
Repeat playback / Sequence marking
To repeat the playback of a title, chapter, track, scene, selected A-B segment or entire disc. Your
player enables you to mark your favourite DVD scenes or music tracks on audio CDs thanks
to a marking function accessible through the banner.
Repeat play
Select the Repeat Mode icon in the banner using the Navigation keys. With the
Navigation keys, select one of the following functions: Disc Repeat - Title Repeat
- Chapter Repeat - A-B Press OK to set A point - A-B Press OK to set
B point.
EN
• Repeat functions remain active until you turn
them off, open the disc tray or turn off the
power.
• Repeat play only works with discs that show
the elapsed time on the display.
• VCD or S-VCD repeat playback is not
available in PCB mode.
Repeat playback of a scene between two points
1. Select the repeat play function and choose A-B with the Navigation keys.
2. Press ok to memorise the beginning of the scene you want to repeat.
3. Wait a few seconds before pressing again on ok to mark the end of the sequence to be repeated
(point B). A-B Repeat appears to tell you that the repeat playback of the sequence is starting.
To stop repeating the sequence, select Off with the Navigation keys or press STOP.
• If during a fast forward or backward reading
the B point is reached, the player will proceed
at normal speed from the A point
• If during a fast search the A point is reached,
the player will start reading at normal speed
from the A point.
• The A-B repeat mode will be cancelled if you
press STOP, if the disc is ejected or if another
repeat mode is selected.
Sequence marking (DVDs and Audio CDs)
1. Display the banner using the info key.
2. Select the marking icon using the Navigation keys. Press ok to validate and display the
marking banner. It offers you a choice of 6 sequence marking options.
3. Choose one of the 6 positions on the banner using the Navigation keys.
4. Press ok to mark the beginning of a scene.
• To play a scene with a marker, select the
button then press ok to validate.
• To delete a marker, select the
button then press ok to validate.
• This function enables you to mark up to 6
scenes or music tracks per DVD or CD, on
several different discs.
• The Marking function only works with discs
that show the elapsed time on screen.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 20
Navigation
keys
Other functions
Video CD - Menu de contrôle de lecture (PBC)
According to the processing or recording software used your drive will read the disks containing the
VCD or S-VCD format video (1)
.
The functions described in this paragraph are only available if PBC mode has been activated using
the functions banner.
Some Video CDs (2) have scenes and information which can be selected interactively through an on-
screen menu.
This menu (3) appears when the disc is loaded. Use the remote control number keys to select an item
in the menu.
Pedigree dogs
• Depending on the disc, the menu may extend over more
1
2
3
4
5
Collie
Terrier
than one screen. To see the other screens, use the |ÃÃ /
¨¨| skip keys.
• Some discs displaying
a
menu at start up will
Bobtail
automatically go in to play mode if nothing is changed on
the menu after a certain period of time.
Shepdog
Husky
Press PLAY to start playback.
• To return from playback to the menu, press return.
To select 1, you must validate by
pressing ok.
Press STOP to stop playback and remove the menu.
• Complete stop is obtained by pressing STOP key twice.
• Even after the player has finished playing a programme, the disc may continue to rotate while the
menu is displayed. When no further selections are to be played, press STOP to exit the menu.
• During playback, press yellow info key: info strip is displayed on-screen.
1.
3.
VCD: Video CD k MPEG 1format
Some version-2 Video CDs with PBC may not
have an on-screen menu. In that case, they
function like version-1.1. video CDs or audio
CDs.
S-VCD: CD Super Video CD k MPEG 2 format
Compatibility between your player and S-VCD
discs is dependent on the quality of the software
used to produce your S-VCD disc.
2.
Video CD, version 2.0 with playback control
(PBC). When the PBC function is present on the
disc, “PBC” is printed on the disc jacket.
To record your CD, please read our advice on
page 23.
Video DVD - Camera angles
On certain DVDs, scenes may be recorded under various angles (up to 9 viewing angles).
In that case, an icon appears on the TV screen.
To change the viewing angle, use the Navigation keys when the icon is displayed on the
TV screen.
To access the viewing angle icon directly, press the
key on the remote control.
Video DVD and Video CD - Zoom
To blow up the picture (1 to 4 times) during playback, press the
key repeatedly on the remote
control. To see a specific spot, move the zoom with the Navigation key. To return to normal
viewing, press repeatedly on the
key until ZOOM 1X is displayed in the on-screen window.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 21
Navigation
keys
Reading JPEG and MP3 files
Reading JPEG files
Your player can read discs containing JPEG image
files with a resolution of up to 2 million pixels. If
automatic playback mode was selected, a slide show
displaying each image recorded on the disc will start
automatically; if manual playback mode was
selected, you will be asked to select each image for
display individually. If automatic playback mode was
selected, the menu used to set each image’s display
time is displayed. Use the remote control’s
Navigation keys to select each image’s display time.
Validate by pressing ok; all files (and/or folders)
recorded on the disc are then listed. Press the remote
control’s Navigation keys to select an image (or
folder, if there are any) and then press ok.
EN
• No banner is displayed when JPEG image files are being shown.
• JPEG information: Visualizing a JPEG photo on the screen of your TV does not require large resolutions.
We recommend that you reduce the size of your files with a suitable software package with a photography
retouching software before -recording. Some JPEG files might conflict with the DVD Player. Some JPEG files
might not be capable of being displayed. If one or more of the JPEG files is too large for the DVD player to
read, Incompatible picture size appears on the screen. Also, when a disc contains multiple files, a larger file
can sometimes block the player from displaying all of the other JPEG files on the disc.
What’s MP3?
MP3 is the audio file format allowing you to easily compress music recordings, and was
co-developed by
.
The main advantage of MP3 is that it enables storage of CD-quality music tracks on a home computer
in manageable, compressed files.
Thanks to compression you now only need about 4 Mb of disc space for a 4 minute music track,
compared with some 40 Mb for conventional file formats, but with almost no reduction in listening
quality!
MP3 CD Playback
When you play an MP3 disc, the MP3 menu will be
displayed instead of the DVD player menu. The DVD
player menu is not available when playing MP3
discs. MP3 content is divided into album(s) and
songs. A disc may hold several albums and each
album can contain several songs. (Similar to titles
and chapters on a DVD disc.)
• Use the remote control Navigation keys to select
albums and songs.
• As computer files, several levels (several albums)
may be recorded on a disc.
Song skip
• Press repeatedly on the ¨¨| or |Ãà keys to go to the previous song or to the next one. Press as
many times as the number of songs you want to skip (wait a few seconds after each press).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 22
Audio DVD playback
About Audio DVDs
Audio DVD is a new digital recording format for audio discs. This format is based on the
success of Video DVDs containing 5.1 multichannel sound.
Audio DVD therefore gives you new sound sensations by spreading the sound over 6
loudspeakers (6 x 96 KHz/24 bits analogue channels). If possible, therefore, you should
connect the player to a 5.1 amplifier using the 6 channels (marked (5) on page 6) as this gives
the best 5.1 sound quality. Connecting the player in this way is also recommended for Video
DVDs.
The digital connections (marked 1 on page 6) should only be used with an amplifier that has
(1)
no 5.1 analogue input connections. The audio sound quality is not as good as through the
5.1 connections.
Many Audio DVDs contain video, in the form of information (bibliographies, titles list, etc.),
video clips, photos, etc.
Groups
Some discs are divided into several groups that are accessed through the functions banne (1)
.
While a disc is playing, press the remote control’s info key and use the navigation keys to
select the group icon (G:2) and then display which groups are available.
Browser (Browse)
(2)
Audio DVDs
contain large amounts of varied information. The way in which this
information is presented varies from one disc to another. With some Audio DVDs, you can
display the images contained on the disc, one at a time, using the info banner’s Browser
(Browse) icon.
While a disc is playing, press the remote control’s info key and use the navigation keys to
select the browser icon (Browse) and then display the different headings contained on the
disc.
In accordance with the DVD standard and the
protection of copyright, the quality of the Audio
signals available through the digital output
connections (marked (1) on page 6) is limited, to
match that of Audio CDs (48 KHz/16 bits).
Hidden information is sometimes contained on a
disc. To see this information, you must first enter
a password, which is generally shown on the
disc’s cover or on the disc itself. This password
is only linked to the disc; it is unrelated to your
player. The disc’s password can sometimes be
found on the publisher’s Web site.
1.
2.
What is contained on Audio DVDs depends on
their publishers. The icons displayed in the
functions banner may therefore vary.
Important: Unlike Video DVDs, Audio DVDs do not have a Region code. You can therefore buy Audio DVDs
anywhere in the world.
To play an Audio DVD on 2 loudspeakers in very high quality stereo, if the Audio DVD provides a 192 KHz/24
bits signal you should use the 2 stereo channels, L and R (marked (8) on page 6).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 23
(1)
CD-Rs and MP3 files
- (Recommendations)
About CD-R discs
This unit can play most CD-R discs. However, depending on the condition of the CD-recorder,
computer and the disc used, you may find that not all discs will play successfully. When playing
a CD-R disc, it is completely normal for the unit to take up to 20 seconds to recognize the disc
before starting to play. If the disc is not recognized after a period of 20 seconds, remove the
disc, and then insert it again. If after several trials, this disc cannot be recognized, make sure
you have followed the recommendations below or try another type of disc. There are two main
types of recordable CDs:
EN
- CD-R audio discs (for music only), which should be used when recording with Hifi CD-audio
recorder.
- CD-R Data discs are designed for recording via a CD writer on a personal computer. Use
these discs as a preference.
• As a preference, opt for CD-Rs instead of CD-RWs (rewritable CDs) as, in certain cases, CD-RW
playback may be faulty.
• As a preference, opt for 74-min (650 Mb) CD-Rs instead of 80-min (700 Mb) CD-Rs.
• Fermer toutes les applications de votre ordinateur personnel afin d’optimiser la qualité et la fiabilité
de vos enregistrements sur le disque.
• Use reliable, good-quality CD writing software.
• Whatever the real recording capacity of the CD-R, do not use more than 630 Mb of recording space
on the disc.
Make sure that the recording is “long enough” to be played. If the recording is too short, disc
identification time may be increased.
About MP3 files copied onto CD-Rs
In the case of CD-R MP 3 discs, please follow all the recommendations for CD-R above, plus
the comments below:
Format
• Your MP3 files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 files
are compatible with Microsoft’s DOS and Windows, and with Apple’s Mac. These two formats are
the most widely used.
Name
• When naming your MP3 files do not exceed 12 characters, and place “.mp3” as the file
extension. General name format of: Title.mp3. When composing your title ensure that you use 8
characters or less, have no spaces in the name, and avoid the use of special characters including
( . , / , \ , = ,+).
Compression
• Use a decompression transfer rate of at least 128 kb/sec (kilobytes/second) when recording
MP3 files. Sound quality with MP3 files basically depends on the rate of
compression/decompression you choose. Getting audio CD quality sound requires an analog/digital
sampling rate, that is conversion to MP3 format, of at least 128 kb/sec and up to 160 kb/sec.
However, choosing higher rates, like 192 kb/sec or more, only rarely give even better sound quality.
Conversely, files with sampling rates below 128 kb/sec will not be played properly.
Protection
• Do not try recording copyright protected MP3 files. “securized” files are encrypted and code
protected to prevent illegal copying. These files are of the following types: Windows Media™
(registered trade mark of Microsoft Inc) and SDMI™ (registered trade mark of The SDMI
Foundation). You must not copy such files.
1.
Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality. You should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (that is degraded
sound quality and even, in some cases, inability of the player to read the file or files).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 24
Navigation
keys
Preferred languages
Your player gives you a selection of languages to choose from. You can change the language
of the player menus, the language of the disc menus, the language of the dialogues and that of
the subtitles. In the menu, choose your preferred language for dialogues and subtitles. If it is
available on the DVD you will be playing, it will be selected automatically. The default
language is the one which is selected in the main menu. During playback, you can display or
remove the subtitles and change the language of the subtitles using the banners.
When the player’s menu is displayed
(in Stop mode):
1. select Languages using the Navigation
keys,
2. press ok to validate,
3. select a function with the Navigation tools
and validate with ok,
4. choose the language with the Navigation
keys,
5. press ok to validate.
• If there is no English on the disc for menus,
dialogues, and / or subtitles, the player selects
the default language of the disc.
• If you chose “English” during the initial setting (carried out on page 5):
- the main menu, in English,
- the menus of the disc, in English (if available),
- the language of the dialogues, in English (if available).
Language of player menus
The language of your player menus was determined upon installation (k page 5). You can
nevertheless change it by following the procedure given on this page.
To change the language of the player menus, select Player Menus then press ok. Choose the
language using the Navigation keys and press ok to validate.
Language of disc menus
To change the language of the disc menus, select Disc Menus then press ok. Choose the language
using the Navigation keys and press ok to validate.
If the language chosen is available for a title, it is then automatically selected.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 25
Navigation
keys
DVD - Language of the dialogues
Some discs offer a selection of languages for the dialogues. The default language is the one you
selected during installation (k page 5) or the one you set according to the instructions on the
previous page, provided this language is available on the disc being played. To change the language
of the dialogues, your player offers you two possibilities (1)
:
EN
From the player menu
In STOP mode, the player menu is displayed. Use the Navigation, keys to select the Languages
then Audio to access the list of languages available (2)
.
From the banner
During PLAYBACK, display the banner using the info key and select the Audio icon with the
Navigation keys. Choose one of the languages available on the disc.
With DVDs which have
recommend that you use the disc menus rather
than the player menu.
You can also change the language of the
dialogues and subtitles (if they are available on
the disc). During playback, display the disc
menu using the menu key. Then use the
Navigation keys.
a
DVD menu, we
If the language chosen is also available on the
DVD, it will be selected as the dialogue
language. If it is not available, the preferred disc
language will be selected.
2.
1.
DVD - Language of the subtitles
Some discs offer a selection of subtitle languages. The default language is the one you selected
during installation (k page 5) or the one you set according to the instructions on the previous page,
provided this language is available on the disc being played. To change the language of the subtitles,
your player offers you two possibilities (1)
:
With DVDs which have a DVD menu, we recommend that you use the disc menus rather than the
player menu.
From the player menu
In STOP mode, the player menu is displayed. Use the Navigation keys to select the Languages
then Subtitles to access the list of languages available (2)
.
From the banner
During PLAYBACK, display the banner using the info key and select the Subtitles icon with
the Navigation keys. Choose one of the languages available on the disc.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 26
Navigation
keys
lock
To enable the Lock Player function, you must enter a password. The Ratings Limits function
enables you to control the type of discs or programs that your family can watch. If certain discs
contain information or scenes that exceed the rating limit you’ve set, they will not be played.
There are 8 rating levels.
Load a disc and press STOP.
The player menu appears.
1. Select Lock using the Navigation keys.
2. Press ok to validate.
3. Select a function with the Navigation tools and
validate with ok.
4. Adjust the setting using the Navigation keys.
DVD - Lock Player
1. Select the Lock Player line and press ok to validate.
2. You are requested to enter a “new password”. Enter your four-digit number (1) using the remote
control number keys, then press ok to validate.
3. You are requested to confirm. Repeat the operation.
• To disable the lock, select the Unlock Player line and press ok to validate.
• To change your password, select the Change Password line and press ok to validate. Enter
your new 4-digit code. Enter it once more to confirm.
1.
Choose a four-digit number that you will be able
to remember easily or note it down.
• If you’ve forgotten your password, consult the
Troubleshooting guide at the end of this
manual (k page 27).
(1)
DVD - Ratings limits
Choose the rating limit: select Rated Titles then press ok to validate. Select the level using the
Navigation keys, then press ok to validate.
• Non-indexed titles can all be freely accessible or require
a
password:
select Unrated Titles then press ok to validate. Select “Free Access” or “Password
Required” then press ok to validate.
1.
1.
This function is only available on DVDs for
which the publisher has set a rating limit. It
therefore depends on the disc.
In Europe, very few discs have rating limits.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 27
Appendix
Troubleshooting guide
Before requesting service (troubleshooting).
• Your preferred menu language on a DVD disc
(if available) has not been set during set up.
• The menu is not available in your language on the
DVD disc.
No power?
• Correctly connect the AC Power Cord to an AC
Outlet.
There is no picture?
• Turn on the TV set and your DVD player.
• Check connections.
• Make the correct input selection on the TV set.
• To deactivate the Progressive Scan function, press
and hold down the “8” X button on the front of
the player.
Audio (spoken) and / or subtitle language is not the
one selected during the initial player set-up?
• If the audio or subtitle language is not available on
the DVD disc, the language selected during initial
player set-up will not be heard or seen. The disc’s
priority language (default language) is selected
automatically. If you want another language, press
EN
The remote control does not work?
• The batteries are fully discharged and must be
replaced. When you insert the replacement
batteries, ensure you align their positive and
negative polarities correctly (k page 4).
• Remove batteries and hold down one or more keys
for several minutes to drain the microprocessor
inside the remote to reset it. Reinstall batteries and
try remote again.
• Point the remote control to the front of the player.
• Operate the remote control within an 8 m range
from the player.
• Remove any obstacles between the remote control
and the red LED on the player.
“
” key and “ ” key to select it temporarily for
this disc (Or press menu during playback, if the
disc has its own language selection menu).
If you forget your code key number for the parental
rating (locking) function, you must do the following:
• Open the player’s disc tray and, if it contains a disc,
remove the disc. Close the disc tray. The player now
displays its menu on the TV screen. While pressing
and holding down your player’s SKIP “:” key,
press and hold down the remote control’s STOP key
for at least two seconds. Release both keys when the
menu changes. The player’s menu switches back to
English and any settings that have been changed
since the player was first installed are reset to the
original delivery settings (factory settings). Should
you wish the player to display its information in a
language other than English, the language selection
menu is displayed after you switch the player off
and then on again to repeat its initial setup process.
See page 5 of this manual for instructions on how to
set up the player again.
There is no sound or it can hardly be heard?
• Make the correct audio input selection and volume
adjustment on the TV set or hifi system (amplifier
or AV selector).
There are no subtitles?
• Check that the subtitle is recorded on the disc.
• Subtitles disappear from the TV screen. See how to
display subtitles.
The menu language is not the one you want?
• The menu language for your player has not been set
during set-up.
Technical data
Power requirements: AC 230 V, 50 Hz Power consumption: 15W (approx. 2,5 W when power is OFF)
Operating temperature range: + 5 to + 35° C Operating humidity range: 10 to 75% (no condensation)
Audio signal to noise ratio (DVD): 110dB (A wtd)* Playback heads: 2 Class 2 Laser diodes – Wavelength:
655/780 nm.
Nominal Specification.
*
• THOMSON Multimedia reserves the right to change the specifications without notice.
If you encounter difficulties
Advisors are at your disposal to help you solve your problems at this telephone number.
You can contact THOMSON by dialling: 0845 601 3093
(For Great-Britain, all calls will be charged at local rate)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 28
Universal remote control (TV-HIFI)
Universal remote control setting - Keys that can be used
You have the opportunity to adjust your remote control so that it can control your TV or AV amplifier.
To do this follow the instructions below.
1. Place the switch dvd • hifi • tv on
the device you want to control.
• To switch off (put on
standby) or on
(according to the
device).
• Control of menus or
special functions.
Amplifier
TV
• Volume, cutting of
sound, change of
channel.
2. Look for the 3-digit code of your
device's brand in the table of brands on
the page 29 (Highlight it with a pencil,
for example).
• Change of channel
and inputting digital
values.
3. Hold the menu key down and key in
the 3-digit code corresponding to the
make of your TV set. Depending on
your TV set model, it may be necessary
to try several of the proposed codes.
Reading key, disk
functions.
4. Release the menu key.
• Try to operate the device by switching
B
it on / off with the
key.
• If it does not work, repeat from step 2
with another 3-digit code.
• When several codes are proposed to you, try each code so as to determine which one will cover the most
functions.
1
• If you have replaced the batteries of the remote control, perform the remote control
set-up again.
• The keys that can be used on the remote control depend on the brand, the model and years of marketing the
devices to be ordered (TV, amplifier). It is even possible that in older models no key works.
Conception : M.Rensonnet - Réalisation : BEI
DVD - OP / DTH 700 E-U/ EN - SP / RST - BEI / 08-2002
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 29
Universal remote control
Brand codes information
List of TV brands
Code
List of TV brands
Code
Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008, 020
Akari . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .028
Bang & Olufsen . . . . . . . . . . . . . . . . . . . .009, 019
Blaupunkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .023
Bluesky . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020
Brandt . . . . . . . . . . . . . . . . . . . .000, 001, 010, 020
Brionvega . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019
CGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016
Continental Edison . . . . . . . . . . . . . . . . . . . . .004
Daewoo . . . . . . . . . . . . . . . . . . . . . . . . . .020, 025
Elbe . . . . . . . . . . . . . . . . . . . . . . . . .005, 015, 023
Ferguson . . . . . . . . . .000, 001, 003, 004, 010, 020
Finlux . . . . . . . . . . . . . . . . . . . . . . . .019, 020, 024
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008
Formenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019
Goldstar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020
Grundig . . . . . . . . . . . . . . . . . . . . . . .016, 023, 024
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .007
Imperial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .013
Kneissel . . . . . . . . . . . . . . . . . . . . . . . . . .020, 025
Loewe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020
Loewe opta . . . . . . . . . . . . . . . . . . . . . . . .019, 020
Luxor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005
Metz . . . . . . . . . . . . . . . . . . . . . . . . .013, 019, 023
Mitsubishi . . . . . . . . . . . . . . . . . . . . .017, 018, 020
Mivar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016
Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005
Nordmende . . . . . . . . . . . . . . . .000, 001, 010, 020
Orion . . . . . . . . . . . . . . . . . . . . . . . . . . . .005, 020
Panasonic/National . . . . . . . . . . . . . .005, 012, 026
Philips . . . . . . . . . . . . . . . . . . . . . . . . . . .019 - 021
Phonola . . . . . . . . . . . . . . . . . . . . . . . . . .019 - 021
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . .001, 005
Polytron . . . . . . . . . . . . . . . . . . . . . .020, 027, 029
Radiola . . . . . . . . . . . . . . . . . . . . . . . . . .019 - 021
Radiomarelli . . . . . . . . . . . . . . . . . . . . . . . . . . .019
Rex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005
Saba . . . . . . . . . . . . . .000, 001, 005, 010, 019, 020
Salora . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . .020, 030
Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . . . .008, 018
Schaub-Lorenz . . . . . . . . . . . . . . . . .005, 016, 020
Schneider . . . . . . . . . . . . . . . . . . . . . . . .019 - 021
Seleco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . .018, 022
Siemens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .023
Singer . . . . . . . . . . . . . . . . . . . . . . . .001, 002, 019
Sinudyne . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019
Sonitron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . .014, 018
Teleavia . . . . . . . . . . . . . . . . . . . . . .001, 010, 020
Telefunken . . . . . . . . . . . . .000, 001, 002, 010, 020
Thomson . . . . . . . . . . . . . .000, 001, 002, 010, 020
Toshiba . . . . . . . . . . . . . . . . . . .006, 016, 018, 024
Wega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019
Yokan . . . . . . . . . . . . . . . . . . . . . . . . . . . .020, 025
Yoko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020
EN
List of Hifi Amplifier brands
Code
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .502, 515
Harmon Kar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .516
Harmon Kardon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .503
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .517
Kenwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .505, 506, 518
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .507, 519, 520
Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .501
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .508, 521, 522
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .509, 514, 523
Thomson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500, 511
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .513
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .510, 512
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DTH700_EN 13/08/02 15:27 Page 30
30
Download from Www.Somanuals.com. All Manuals Search And Download.
|